src/FeaturesAPI/FeaturesAPI_Extrusion.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
   2
   3 // File:        FeaturesAPI_Extrusion.cpp
   4 // Created:     09 June 2016
   5 // Author:      Dmitry Bobylev
   6
   7 #include "FeaturesAPI_Extrusion.h"
   8
   9 #include <ModelHighAPI_Double.h>
  10 #include <ModelHighAPI_Dumper.h>
  11 #include <ModelHighAPI_Reference.h>
  12 #include <ModelHighAPI_Tools.h>
  13
  14 //==================================================================================================
  15 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature)
  16 : ModelHighAPI_Interface(theFeature)
  17 {
  18   initialize();
  19 }
  20
  21 //==================================================================================================
  22 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  23                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  24                                              const ModelHighAPI_Double& theSize)
  25 : ModelHighAPI_Interface(theFeature)
  26 {
  27   if(initialize()) {
  28     fillAttribute(theBaseObjects, mybaseObjects);
  29     setSizes(theSize, ModelHighAPI_Double());
  30   }
  31 }
  32
  33 //==================================================================================================
  34 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  35                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  36                                              const ModelHighAPI_Selection& theDirection,
  37                                              const ModelHighAPI_Double& theSize)
  38 : ModelHighAPI_Interface(theFeature)
  39 {
  40   if(initialize()) {
  41     fillAttribute(theBaseObjects, mybaseObjects);
  42     fillAttribute(theDirection, mydirection);
  43     setSizes(theSize, ModelHighAPI_Double());
  44   }
  45 }
  46
  47 //==================================================================================================
  48 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  49                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  50                                              const ModelHighAPI_Double& theToSize,
  51                                              const ModelHighAPI_Double& theFromSize)
  52 : ModelHighAPI_Interface(theFeature)
  53 {
  54   if(initialize()) {
  55     fillAttribute(theBaseObjects, mybaseObjects);
  56     setSizes(theToSize, theFromSize);
  57   }
  58 }
  59
  60 //==================================================================================================
  61 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  62                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  63                                              const ModelHighAPI_Selection& theDirection,
  64                                              const ModelHighAPI_Double& theToSize,
  65                                              const ModelHighAPI_Double& theFromSize)
  66 : ModelHighAPI_Interface(theFeature)
  67 {
  68   if(initialize()) {
  69     fillAttribute(theBaseObjects, mybaseObjects);
  70     fillAttribute(theDirection, mydirection);
  71     setSizes(theToSize, theFromSize);
  72   }
  73 }
  74
  75 //==================================================================================================
  76 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  77                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  78                                              const ModelHighAPI_Selection& theToObject,
  79                                              const ModelHighAPI_Double& theToOffset,
  80                                              const ModelHighAPI_Selection& theFromObject,
  81                                              const ModelHighAPI_Double& theFromOffset)
  82 : ModelHighAPI_Interface(theFeature)
  83 {
  84   if(initialize()) {
  85     fillAttribute(theBaseObjects, mybaseObjects);
  86     setPlanesAndOffsets(theToObject, theToOffset, theFromObject, theFromOffset);
  87   }
  88 }
  89
  90 //==================================================================================================
  91 FeaturesAPI_Extrusion::FeaturesAPI_Extrusion(const std::shared_ptr<ModelAPI_Feature>& theFeature,
  92                                              const std::list<ModelHighAPI_Selection>& theBaseObjects,
  93                                              const ModelHighAPI_Selection& theDirection,
  94                                              const ModelHighAPI_Selection& theToObject,
  95                                              const ModelHighAPI_Double& theToOffset,
  96                                              const ModelHighAPI_Selection& theFromObject,
  97                                              const ModelHighAPI_Double& theFromOffset)
  98 : ModelHighAPI_Interface(theFeature)
  99 {
 100   if(initialize()) {
 101     fillAttribute(theBaseObjects, mybaseObjects);
 102     fillAttribute(theDirection, mydirection);
 103     setPlanesAndOffsets(theToObject, theToOffset, theFromObject, theFromOffset);
 104   }
 105 }
 106
 107 //==================================================================================================
 108 FeaturesAPI_Extrusion::~FeaturesAPI_Extrusion()
 109 {
 110 }
 111
 112 //==================================================================================================
 113 void FeaturesAPI_Extrusion::setNestedSketch(const ModelHighAPI_Reference& theSketch)
 114 {
 115   mysketch->setValue(theSketch.feature());
 116   mybaseObjects->clear();
 117   mybaseObjects->append(theSketch.feature()->firstResult(), GeomShapePtr());
 118
 119   execIfBaseNotEmpty();
 120 }
 121
 122 //==================================================================================================
 123 void FeaturesAPI_Extrusion::setBase(const std::list<ModelHighAPI_Selection>& theBaseObjects)
 124 {
 125   mysketch->setValue(ObjectPtr());
 126   mybaseObjects->clear();
 127   fillAttribute(theBaseObjects, mybaseObjects);
 128
 129   execIfBaseNotEmpty();
 130 }
 131
 132 //==================================================================================================
 133 void FeaturesAPI_Extrusion::setDirection(const ModelHighAPI_Selection& theDirection)
 134 {
 135   fillAttribute(theDirection, mydirection);
 136
 137   execIfBaseNotEmpty();
 138 }
 139
 140 //==================================================================================================
 141 void FeaturesAPI_Extrusion::setSizes(const ModelHighAPI_Double& theToSize,
 142                                      const ModelHighAPI_Double& theFromSize)
 143 {
 144   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES(), mycreationMethod);
 145   fillAttribute(theToSize, mytoSize);
 146   fillAttribute(theFromSize, myfromSize);
 147
 148   execIfBaseNotEmpty();
 149 }
 150
 151 //==================================================================================================
 152 void FeaturesAPI_Extrusion::setSize(const ModelHighAPI_Double& theSize)
 153 {
 154   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES(), mycreationMethod);
 155   fillAttribute(theSize, mytoSize);
 156   fillAttribute(ModelHighAPI_Double(), myfromSize);
 157
 158   execIfBaseNotEmpty();
 159 }
 160
 161 //==================================================================================================
 162 void FeaturesAPI_Extrusion::setPlanesAndOffsets(const ModelHighAPI_Selection& theToObject,
 163                                                 const ModelHighAPI_Double& theToOffset,
 164                                                 const ModelHighAPI_Selection& theFromObject,
 165                                                 const ModelHighAPI_Double& theFromOffset)
 166 {
 167   fillAttribute(FeaturesPlugin_Extrusion::CREATION_METHOD_BY_PLANES(), mycreationMethod);
 168   fillAttribute(theToObject, mytoObject);
 169   fillAttribute(theToOffset, mytoOffset);
 170   fillAttribute(theFromObject, myfromObject);
 171   fillAttribute(theFromOffset, myfromOffset);
 172
 173   execIfBaseNotEmpty();
 174 }
 175
 176 //==================================================================================================
 177 void FeaturesAPI_Extrusion::dump(ModelHighAPI_Dumper& theDumper) const
 178 {
 179   FeaturePtr aBase = feature();
 180   const std::string& aDocName = theDumper.name(aBase->document());
 181
 182   AttributeReferencePtr anAttrSketch = aBase->reference(FeaturesPlugin_CompositeSketch::SKETCH_ID());
 183   AttributeSelectionListPtr anAttrObjects = aBase->selectionList(FeaturesPlugin_Extrusion::BASE_OBJECTS_ID());
 184   AttributeSelectionPtr anAttrDirection = aBase->selection(FeaturesPlugin_Extrusion::DIRECTION_OBJECT_ID());
 185
 186   theDumper << aBase << " = model.addExtrusion(" << aDocName << ", ";
 187   anAttrSketch->isInitialized() ? theDumper << "[]" : theDumper << anAttrObjects;
 188   theDumper << ", " << anAttrDirection;
 189
 190   std::string aCreationMethod = aBase->string(FeaturesPlugin_Extrusion::CREATION_METHOD())->value();
 191
 192   if(aCreationMethod == FeaturesPlugin_Extrusion::CREATION_METHOD_BY_SIZES()) {
 193     AttributeDoublePtr anAttrToSize = aBase->real(FeaturesPlugin_Extrusion::TO_SIZE_ID());
 194     AttributeDoublePtr anAttrFromSize = aBase->real(FeaturesPlugin_Extrusion::FROM_SIZE_ID());
 195
 196     theDumper << ", " << anAttrToSize << ", " << anAttrFromSize;
 197   } else if(aCreationMethod == FeaturesPlugin_Extrusion::CREATION_METHOD_BY_PLANES()) {
 198     AttributeSelectionPtr anAttrToObject = aBase->selection(FeaturesPlugin_Extrusion::TO_OBJECT_ID());
 199     AttributeDoublePtr anAttrToOffset = aBase->real(FeaturesPlugin_Extrusion::TO_OFFSET_ID());
 200     AttributeSelectionPtr anAttrFromObject = aBase->selection(FeaturesPlugin_Extrusion::FROM_OBJECT_ID());
 201     AttributeDoublePtr anAttrFromOffset = aBase->real(FeaturesPlugin_Extrusion::FROM_OFFSET_ID());
 202
 203     theDumper << ", " << anAttrToObject << ", " << anAttrToOffset << ", " << anAttrFromObject << ", " << anAttrFromOffset;
 204   }
 205
 206   theDumper << ")" << std::endl;
 207
 208   if(anAttrSketch->isInitialized()) {
 209     theDumper << aBase << ".setNestedSketch(" << anAttrSketch << ")";
 210   }
 211 }
 212
 213 void FeaturesAPI_Extrusion::execIfBaseNotEmpty()
 214 {
 215   if(mybaseObjects->size() > 0) {
 216     execute();
 217   }
 218 }
 219
 220 //==================================================================================================
 221 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 222                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 223                           const ModelHighAPI_Double& theSize)
 224 {
 225   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 226   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theSize));
 227 }
 228
 229 //==================================================================================================
 230 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 231                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 232                           const ModelHighAPI_Selection& theDirection,
 233                           const ModelHighAPI_Double& theSize)
 234 {
 235   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 236   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theDirection, theSize));
 237 }
 238
 239 //==================================================================================================
 240 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 241                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 242                           const ModelHighAPI_Double& theToSize,
 243                           const ModelHighAPI_Double& theFromSize)
 244 {
 245   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 246   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature, theBaseObjects, theToSize, theFromSize));
 247 }
 248
 249 //==================================================================================================
 250 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 251                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 252                           const ModelHighAPI_Selection& theDirection,
 253                           const ModelHighAPI_Double& theToSize,
 254                           const ModelHighAPI_Double& theFromSize)
 255 {
 256   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 257   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 258                                                 theBaseObjects,
 259                                                 theDirection,
 260                                                 theToSize,
 261                                                 theFromSize));
 262 }
 263
 264 //==================================================================================================
 265 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 266                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 267                           const ModelHighAPI_Selection& theToObject,
 268                           const ModelHighAPI_Double& theToOffset,
 269                           const ModelHighAPI_Selection& theFromObject,
 270                           const ModelHighAPI_Double& theFromOffset)
 271 {
 272   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 273   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 274                                                 theBaseObjects,
 275                                                 theToObject,
 276                                                 theToOffset,
 277                                                 theFromObject,
 278                                                 theFromOffset));
 279 }
 280
 281 //==================================================================================================
 282 ExtrusionPtr addExtrusion(const std::shared_ptr<ModelAPI_Document>& thePart,
 283                           const std::list<ModelHighAPI_Selection>& theBaseObjects,
 284                           const ModelHighAPI_Selection& theDirection,
 285                           const ModelHighAPI_Selection& theToObject,
 286                           const ModelHighAPI_Double& theToOffset,
 287                           const ModelHighAPI_Selection& theFromObject,
 288                           const ModelHighAPI_Double& theFromOffset)
 289 {
 290   std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(FeaturesAPI_Extrusion::ID());
 291   return ExtrusionPtr(new FeaturesAPI_Extrusion(aFeature,
 292                                                 theBaseObjects,
 293                                                 theDirection,
 294                                                 theToObject,
 295                                                 theToOffset,
 296                                                 theFromObject,
 297                                                 theFromOffset));
 298 }