src/ConstructionPlugin/Test/TestPoint_34658.py

   1 # Copyright (C) 2014-2023  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 import sys
  21 import salome
  22 from ModelAPI import *
  23
  24 def assertPoint(aPoint):
  25   assert(aPoint is not None)
  26   aPointFeature = aPoint.feature()
  27   assert(len(aPointFeature.results()) > 0)
  28   aPointResult = modelAPI_ResultConstruction(aPointFeature.firstResult())
  29   assert(aPointResult is not None)
  30   assert(aPointResult.isInfinite())
  31
  32
  33 salome.salome_init()
  34
  35 ###
  36 ### SHAPER component
  37 ###
  38
  39 from salome.shaper import model
  40
  41 model.begin()
  42 partSet = model.moduleDocument()
  43
  44 ### Create Part
  45 Part_1 = model.addPart(partSet)
  46 Part_1_doc = Part_1.document()
  47
  48 ### Create Sketch
  49 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  50
  51 ### Create SketchLine
  52 SketchLine_1 = Sketch_1.addLine(0, 0, 0.5, 1.3)
  53 model.do()
  54
  55 ### Create Edge
  56 Edge_1 = model.addEdge(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], False)
  57
  58 ### Create LinearCopy
  59 LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("EDGE", "Edge_1_1")], model.selection("EDGE", "PartSet/OX"), 4, 5, keepSubResults = True)
  60
  61 ### Create Plane
  62 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Sketch_1/SketchLine_1"), model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), True)
  63 Plane_4.setName("Plane_2")
  64 Plane_4.result().setName("Plane_2")
  65 Plane_4.result().setTransparency(0.6)
  66
  67 ### Create Plane
  68 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 1, False)
  69 Plane_5.setName("Plane_3")
  70 Plane_5.result().setName("Plane_3")
  71 Plane_5.result().setTransparency(0.6)
  72
  73 ### Create Plane
  74 Plane_6 = model.addPlane(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_2"), model.selection("VERTEX", "LinearCopy_1_1_2/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), True)
  75 Plane_6.setName("Plane_4")
  76 Plane_6.result().setName("Plane_4")
  77 Plane_6.result().setTransparency(0.6)
  78
  79 ### Create Plane
  80 Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_4"), 1, False)
  81 Plane_7.setName("Plane_5")
  82 Plane_7.result().setName("Plane_5")
  83 Plane_7.result().setTransparency(0.6)
  84
  85 ### Create Plane
  86 Plane_8 = model.addPlane(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_3"), model.selection("VERTEX", "LinearCopy_1_1_3/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), True)
  87 Plane_8.setName("Plane_6")
  88 Plane_8.result().setName("Plane_6")
  89 Plane_8.result().setTransparency(0.6)
  90
  91 ### Create Plane
  92 Plane_9 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_6"), 1, False)
  93 Plane_9.setName("Plane_7")
  94 Plane_9.result().setName("Plane_7")
  95 Plane_9.result().setTransparency(0.6)
  96
  97 ### Create Point (by coordinates)
  98 Point_1 = model.addPoint(Part_1_doc, 16, 0.5, 1.3)
  99
 100 ### Create Point (by position on edge)
 101 Point_2 = model.addPoint(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_4"), 2.5, False, False)
 102
 103 ### Create Point (by projection of point on plane)
 104 Point_3 = model.addPoint(Part_1_doc, model.selection("VERTEX", "LinearCopy_1_1_3/MV:Translated&Sketch_1/SketchLine_1_EndVertex"), model.selection("FACE", "Plane_7"))
 105
 106 ### Create Point (by intersection of axis and plane)
 107 Point_4 = model.addPoint(Part_1_doc, model.selection("EDGE", "LinearCopy_1_1_2"), model.selection("FACE", "Plane_5"))
 108
 109 ### Create Sketch
 110 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 111
 112 ### Create SketchProjection
 113 SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
 114 SketchPoint_1 = SketchProjection_1.createdFeature()
 115
 116 ### Create SketchCircle
 117 SketchCircle_1 = Sketch_2.addCircle(0, 0, 0.6)
 118 Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
 119 Sketch_2.setRadius(SketchCircle_1.results()[1], 0.6)
 120 model.do()
 121
 122 ### Create Extrusion
 123 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection(), 0, "Faces|Wires")
 124 Extrusion_1.result().setTransparency(0.6)
 125
 126 ### Create Point (by center of gravity)
 127 Point_5 = model.addPoint(Part_1_doc, model.selection("SOLID", "Extrusion_1_1"))
 128
 129 ### Create Sphere
 130 Sphere_1 = model.addSphere(Part_1_doc, model.selection("VERTEX", "Point_1"), 0.8)
 131
 132 ### Create Cylinder
 133 Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "Point_2"), model.selection("EDGE", "LinearCopy_1_1_2"), 0.8, 1)
 134
 135 ### Create Torus
 136 Torus_1 = model.addTorus(Part_1_doc, model.selection("VERTEX", "Point_3"), model.selection("EDGE", "LinearCopy_1_1_3"), 0.8, 0.25)
 137
 138 ### Create Cone
 139 Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "Point_4"), model.selection("EDGE", "LinearCopy_1_1_4"), 0.8, 0.3, 1)
 140
 141 ### Create Sphere
 142 Sphere_2 = model.addSphere(Part_1_doc, model.selection("VERTEX", "Point_5"), 0.8)
 143
 144 model.end()
 145
 146 assertPoint(Point_1)
 147 assertPoint(Point_2)
 148 assertPoint(Point_3)
 149 assertPoint(Point_4)
 150 assertPoint(Point_5)