src/CollectionPlugin/Test/TestGroupMoveAndSplit3.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # Check the movement to the end and split: whole results, check names of splitted results and groups
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Extrusion_1 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(-8.333743842364534, 20.52339901477833, -20.15024630541872, 20.52339901477833)
  31 SketchLine_2 = Sketch_1.addLine(-20.15024630541872, 20.52339901477833, -20.15024630541872, 3.980295566502462)
  32 SketchLine_3 = Sketch_1.addLine(-20.15024630541872, 3.980295566502462, -8.333743842364534, 3.980295566502462)
  33 SketchLine_4 = Sketch_1.addLine(-8.333743842364534, 3.980295566502462, -8.333743842364534, 20.52339901477833)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 SketchCircle_1 = Sketch_1.addCircle(5.721674876847291, 12.81157635467982, 6.421166795138789)
  43 Extrusion_1.setNestedSketch(Sketch_1)
  44 Group_1 = model.addGroup(Part_1_doc, "Faces", [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
  45 Group_1.setName("GroupResult")
  46 Group_1.result().setName("GroupResult")
  47 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  48 SketchLine_5 = Sketch_2.addLine(3.924377723198604, 15.23693857548147, -14.36967929032953, 15.23693857548147)
  49 SketchLine_6 = Sketch_2.addLine(-14.36967929032953, 15.23693857548147, -14.36967929032953, 11.61585476914922)
  50 SketchLine_7 = Sketch_2.addLine(-14.36967929032953, 11.61585476914922, 3.924377723198604, 11.61585476914922)
  51 SketchLine_8 = Sketch_2.addLine(3.924377723198604, 11.61585476914922, 3.924377723198604, 15.23693857548147)
  52 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  53 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  54 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  55 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  56 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  57 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  58 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  59 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  60 model.do()
  61 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_5r-SketchLine_6f-SketchLine_7f-SketchLine_8f_wire")], model.selection(), 2, 5)
  62 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")], keepSubResults = True)
  63 model.do()
  64 Part_1_doc.moveFeature(Group_1.feature(), Fuse_1.feature(), True)
  65 model.end()
  66
  67 assert(Part_1_doc.size("Groups") == 2) # 2 results because initially 2 results were selected
  68
  69 # check names of results
  70 from ModelAPI import *
  71 res1 = modelAPI_Result(Part_1_doc.object("Groups", 0))
  72 assert(res1.data().name() == "GroupResult_1")
  73 res2 = modelAPI_Result(Part_1_doc.object("Groups", 1))
  74 assert(res2.data().name() == "GroupResult_2")
  75
  76 assert(model.checkPythonDump())