src/CollectionPlugin/Test/TestGroupMove23.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # Test move the group in history for selection of a whole feature
  21
  22 from salome.shaper import model
  23 from GeomAPI import *
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(35.07635467980296, 23.01108374384237, -25.74753694581282, 23.01108374384237)
  31 SketchLine_2 = Sketch_1.addLine(-25.74753694581282, 23.01108374384237, -25.74753694581282, -23.13546798029557)
  32 SketchLine_3 = Sketch_1.addLine(-25.74753694581282, -23.13546798029557, 35.07635467980296, -23.13546798029557)
  33 SketchLine_4 = Sketch_1.addLine(35.07635467980296, -23.13546798029557, 35.07635467980296, 23.01108374384237)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  40 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  41 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  42 model.do()
  43 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection(), 80, 0)
  44 # selection of a whole feature: 6 faces of a box
  45 Group_1 = model.addGroup(Part_1_doc, "Faces", [model.selection("COMPOUND", "all-in-Extrusion_1")])
  46 model.testNbSubShapes(Group_1, GeomAPI_Shape.FACE, [6])
  47 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_1_1")])
  48 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"))
  49 SketchCircle_1 = Sketch_2.addCircle(-7.736745115674536, 52.14422040986419, 6.760003867274182)
  50 ExtrusionCut_1.setNestedSketch(Sketch_2)
  51 model.do()
  52 # move group after the extrusion-cut, so, it refers to it
  53 Part_1_doc.moveFeature(Group_1.feature(), ExtrusionCut_1.feature())
  54 model.end()
  55
  56 # check that there is a hole appeared in the group-results
  57 assert(len(Group_1.feature().results())==1)
  58 model.testNbSubShapes(Group_1, GeomAPI_Shape.FACE, [8])
  59
  60 assert(model.checkPythonDump())