src/CollectionPlugin/Test/TestGroupMove22.py

   1 # Copyright (C) 2014-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 # Test move the group in history for selection of a whole result of a compsolid
  21
  22 from salome.shaper import model
  23 from GeomAPI import *
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  30 SketchLine_1 = Sketch_1.addLine(-25.00123152709361, 27.48891625615764, 27.86206896551725, 27.48891625615764)
  31 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  32 SketchLine_2 = Sketch_1.addLine(27.86206896551725, 27.48891625615764, -23.88177339901478, -20.02586206896552)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchLine_3 = Sketch_1.addLine(-23.88177339901478, -20.02586206896552, 28.73275862068966, -20.02586206896552)
  35 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  37 SketchLine_4 = Sketch_1.addLine(28.73275862068966, -20.02586206896552, 27.86206896551725, 27.48891625615764)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  39 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_4.endPoint())
  40 SketchLine_5 = Sketch_1.addLine(-25.00123152709361, 27.48891625615764, 28.73275862068966, -20.02586206896552)
  41 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.startPoint())
  42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_5.endPoint())
  43 model.do()
  44 Extrusion_1_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_5f-SketchLine_2r-SketchLine_1r"), model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_5f-SketchLine_4f"), model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_3f-SketchLine_5r")]
  45 Extrusion_1 = model.addExtrusion(Part_1_doc, Extrusion_1_objects, model.selection(), 10, 0)
  46 # selection of a whole result: 5x3-2 faces (2 faces are shared)
  47 Group_1 = model.addGroup(Part_1_doc, "Faces", [model.selection("COMPSOLID", "Extrusion_1_1")])
  48 model.testNbSubShapes(Group_1, GeomAPI_Shape.FACE, [13])
  49 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), 0, 10, [model.selection("COMPSOLID", "Extrusion_1_1")])
  50 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1_1/To_Face"))
  51 SketchCircle_1 = Sketch_2.addCircle(13.4282260278248, 11.79859034244854, 3.718064241992405)
  52 ExtrusionCut_1.setNestedSketch(Sketch_2)
  53 model.do()
  54 # move group after the extrusion-cut, so, it refers to it
  55 Part_1_doc.moveFeature(Group_1.feature(), ExtrusionCut_1.feature())
  56 model.end()
  57
  58 # check that there is a hole appeared in two solids: +4 faces (1 splitted planar, 3 faces of cylinder, divided by seam)
  59 assert(len(Group_1.feature().results())==1)
  60 model.testNbSubShapes(Group_1, GeomAPI_Shape.FACE, [17])
  61
  62 assert(model.checkPythonDump())