src/BuildPlugin/Test/TestCompound.py

   1 # Copyright (C) 2017-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(-19.49406233194174, -69.37451616542793, -72.71146724766345, -69.37451616542793)
  30 SketchLine_2 = Sketch_1.addLine(-72.71146724766345, -69.37451616542793, -72.71146724766345, -28.67067780808921)
  31 SketchLine_3 = Sketch_1.addLine(-72.71146724766345, -28.67067780808921, -19.49406233194174, -28.67067780808921)
  32 SketchLine_4 = Sketch_1.addLine(-19.49406233194174, -28.67067780808921, -19.49406233194174, -69.37451616542793)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 SketchLine_5 = Sketch_1.addLine(16.67888107989752, -75.92151145213565, 19.40636912075787, -34.81908596556777)
  42 SketchPoint_1 = Sketch_1.addPoint(0.6128545881206371, -78.63973361497078)
  43 SketchCircle_1 = Sketch_1.addCircle(51.0302184611028, -58.25492948210744, 14.6764214847306)
  44 SketchCircle_2 = Sketch_1.addCircle(57.27434431552349, -55.3477547099222, 30.40870102508203)
  45 model.do()
  46 Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "PartSet/Origin")])
  47 Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_5")])
  48 Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchCircle_2_2")])
  49 Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchCircle_1_2")])
  50 Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
  51 SketchLine_6 = Sketch_2.addLine(73.69205241424749, 19.68979803478298, 29.86213888681927, 19.68979803478298)
  52 SketchLine_7 = Sketch_2.addLine(29.86213888681927, 19.68979803478298, 29.86213888681927, 46.16063196348271)
  53 SketchLine_8 = Sketch_2.addLine(29.86213888681927, 46.16063196348271, 73.69205241424749, 46.16063196348271)
  54 SketchLine_9 = Sketch_2.addLine(73.69205241424749, 46.16063196348271, 73.69205241424749, 19.68979803478298)
  55 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
  56 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  57 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  58 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  59 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_6.result())
  60 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_7.result())
  61 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_8.result())
  62 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  63 model.do()
  64 Face_2 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r_wire")])
  65 AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("FACE", "Face_2_1")], model.selection("EDGE", "Sketch_2/SketchLine_6"), 120, 2)
  66 Shell_1 = model.addShell(Part_1_doc, [model.selection("FACE", "AngularCopy_1_1_1"), model.selection("FACE", "AngularCopy_1_1_2")])
  67 Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
  68 Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 50)
  69 Box_2 = model.addBox(Part_1_doc, 10, 10, 10)
  70 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_2_1/Front"), 5, True)
  71 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_2_1"), model.selection("FACE", "Plane_1")])
  72 Compound_1_objects = [model.selection("VERTEX", "Sketch_1/SketchPoint_1"),
  73                       model.selection("EDGE", "Sketch_1/SketchLine_1"),
  74                       model.selection("WIRE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r_wire"),
  75                       model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r"),
  76                       model.selection("VERTEX", "Vertex_1_1"),
  77                       model.selection("EDGE", "Edge_1_1"),
  78                       model.selection("WIRE", "Wire_1_1"),
  79                       model.selection("FACE", "Face_1_1"),
  80                       model.selection("SHELL", "Shell_1_1"),
  81                       model.selection("SOLID", "Translation_1_1"),
  82                       model.selection("COMPSOLID", "Partition_1_1")]
  83 Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
  84 model.do()
  85
  86 model.checkResult(Compound_1, model, 1, [11], [3], [22], [92], [186])
  87
  88 model.end()
  89
  90 assert(model.checkPythonDump())