src/BuildPlugin/Test/Test2409.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Issue #2409: Filling on one edge
  23     Check the Filling reports error if just one edge is selected
  24 """
  25
  26 from salome.shaper import model
  27
  28 model.begin()
  29 partSet = model.moduleDocument()
  30 Part_1 = model.addPart(partSet)
  31 Part_1_doc = Part_1.document()
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchLine_1 = Sketch_1.addLine(80, 10, 10, 10)
  34 SketchLine_2 = Sketch_1.addLine(10, 10, 10, 60)
  35 SketchLine_3 = Sketch_1.addLine(10, 60, 80, 60)
  36 SketchLine_4 = Sketch_1.addLine(80, 60, 80, 10)
  37 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  40 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  42 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  43 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  44 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  45 model.do()
  46
  47 Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
  48 model.do()
  49 # check error is reported
  50 assert(Filling_1.feature().error() != "")
  51
  52 Filling_1.setBase([model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_1/Edge-SketchLine_4")])
  53 model.do()
  54 # check there is no error
  55 assert(Filling_1.feature().error() == "")
  56
  57 from GeomAPI import GeomAPI_Shape
  58 model.testNbResults(Filling_1, 1)
  59 model.testNbSubShapes(Filling_1, GeomAPI_Shape.FACE, [1])
  60 model.testResultsVolumes(Filling_1, [3500])
  61
  62 model.end()
  63
  64 assert(model.checkPythonDump())