1 // Copyright (C) 2007-2016 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
21 // File : BLSURFPlugin_BLSURF.cxx
22 // Authors : Francis KLOSS (OCC) & Patrick LAUG (INRIA) & Lioka RAZAFINDRAZAKA (CEA)
23 // & Aurelien ALLEAUME (DISTENE)
24 // Size maps developement: Nicolas GEIMER (OCC) & Gilles DAVID (EURIWARE)
27 #include "BLSURFPlugin_BLSURF.hxx"
28 #include "BLSURFPlugin_Hypothesis.hxx"
29 #include "BLSURFPlugin_Attractor.hxx"
32 #include <meshgems/meshgems.h>
33 #include <meshgems/cadsurf.h>
36 #include <structmember.h>
39 #include <Basics_Utils.hxx>
40 #include <Basics_OCCTVersion.hxx>
42 #include <SMDS_EdgePosition.hxx>
43 #include <SMESHDS_Group.hxx>
44 #include <SMESH_Gen.hxx>
45 #include <SMESH_Group.hxx>
46 #include <SMESH_Mesh.hxx>
47 #include <SMESH_MeshEditor.hxx>
48 #include <SMESH_MesherHelper.hxx>
49 #include <StdMeshers_FaceSide.hxx>
50 #include <StdMeshers_ViscousLayers2D.hxx>
51 #include <SMESH_File.hxx>
53 #include <utilities.h>
61 // OPENCASCADE includes
62 #include <BRepBuilderAPI_MakeFace.hxx>
63 #include <BRepBuilderAPI_MakePolygon.hxx>
64 //#include <BRepBuilderAPI_MakeVertex.hxx>
65 #include <BRepGProp.hxx>
66 #include <BRepTools.hxx>
67 #include <BRep_Builder.hxx>
68 #include <BRep_Tool.hxx>
69 #include <GProp_GProps.hxx>
70 #include <Geom2d_Curve.hxx>
71 #include <GeomAPI_ProjectPointOnCurve.hxx>
72 #include <GeomAPI_ProjectPointOnSurf.hxx>
73 #include <Geom_Curve.hxx>
74 #include <Geom_Surface.hxx>
75 #include <NCollection_Map.hxx>
76 #include <Standard_ErrorHandler.hxx>
78 #include <TopExp_Explorer.hxx>
79 #include <TopTools_DataMapOfShapeInteger.hxx>
80 #include <TopTools_IndexedMapOfShape.hxx>
81 #include <TopTools_MapOfShape.hxx>
83 #include <TopoDS_Compound.hxx>
84 #include <TopoDS_Edge.hxx>
85 #include <TopoDS_Face.hxx>
86 #include <TopoDS_Shape.hxx>
87 #include <TopoDS_Vertex.hxx>
88 #include <TopoDS_Wire.hxx>
90 #include <gp_Pnt2d.hxx>
100 /* ==================================
101 * =========== PYTHON ==============
102 * ==================================*/
113 PyStdOut_dealloc(PyStdOut *self)
119 PyStdOut_write(PyStdOut *self, PyObject *args)
123 if (!PyArg_ParseTuple(args, "t#:write",&c, &l))
126 *(self->out)=*(self->out)+c;
132 static PyMethodDef PyStdOut_methods[] = {
133 {"write", (PyCFunction)PyStdOut_write, METH_VARARGS,
134 PyDoc_STR("write(string) -> None")},
135 {NULL, NULL} /* sentinel */
138 static PyMemberDef PyStdOut_memberlist[] = {
139 {(char*)"softspace", T_INT, offsetof(PyStdOut, softspace), 0,
140 (char*)"flag indicating that a space needs to be printed; used by print"},
141 {NULL} /* Sentinel */
144 static PyTypeObject PyStdOut_Type = {
145 /* The ob_type field must be initialized in the module init function
146 * to be portable to Windows without using C++. */
147 PyObject_HEAD_INIT(NULL)
150 sizeof(PyStdOut), /*tp_basicsize*/
153 (destructor)PyStdOut_dealloc, /*tp_dealloc*/
160 0, /*tp_as_sequence*/
165 PyObject_GenericGetAttr, /*tp_getattro*/
166 /* softspace is writable: we must supply tp_setattro */
167 PyObject_GenericSetAttr, /* tp_setattro */
169 Py_TPFLAGS_DEFAULT, /*tp_flags*/
173 0, /*tp_richcompare*/
174 0, /*tp_weaklistoffset*/
177 PyStdOut_methods, /*tp_methods*/
178 PyStdOut_memberlist, /*tp_members*/
192 PyObject * newPyStdOut( std::string& out )
194 PyStdOut* self = PyObject_New(PyStdOut, &PyStdOut_Type);
199 return (PyObject*)self;
204 ////////////////////////END PYTHON///////////////////////////
206 //////////////////MY MAPS////////////////////////////////////////
208 TopTools_IndexedMapOfShape FacesWithSizeMap;
209 std::map<int,string> FaceId2SizeMap;
210 TopTools_IndexedMapOfShape EdgesWithSizeMap;
211 std::map<int,string> EdgeId2SizeMap;
212 TopTools_IndexedMapOfShape VerticesWithSizeMap;
213 std::map<int,string> VertexId2SizeMap;
215 std::map<int,PyObject*> FaceId2PythonSmp;
216 std::map<int,PyObject*> EdgeId2PythonSmp;
217 std::map<int,PyObject*> VertexId2PythonSmp;
219 typedef std::map<int, std::vector< BLSURFPlugin_Attractor* > > TId2ClsAttractorVec;
220 TId2ClsAttractorVec FaceId2ClassAttractor;
221 TId2ClsAttractorVec FaceIndex2ClassAttractor;
222 std::map<int,std::vector<double> > FaceId2AttractorCoords;
225 TopTools_IndexedMapOfShape FacesWithEnforcedVertices;
226 std::map< int, BLSURFPlugin_Hypothesis::TEnfVertexCoordsList > FaceId2EnforcedVertexCoords;
227 std::map< BLSURFPlugin_Hypothesis::TEnfVertexCoords, BLSURFPlugin_Hypothesis::TEnfVertexCoords > EnfVertexCoords2ProjVertex;
228 std::map< BLSURFPlugin_Hypothesis::TEnfVertexCoords, BLSURFPlugin_Hypothesis::TEnfVertexList > EnfVertexCoords2EnfVertexList;
230 bool HasSizeMapOnFace=false;
231 bool HasSizeMapOnEdge=false;
232 bool HasSizeMapOnVertex=false;
233 //bool HasAttractorOnFace=false;
235 //=============================================================================
239 //=============================================================================
241 BLSURFPlugin_BLSURF::BLSURFPlugin_BLSURF(int hypId, int studyId,
243 : SMESH_2D_Algo(hypId, studyId, gen)
245 MESSAGE("BLSURFPlugin_BLSURF::BLSURFPlugin_BLSURF");
247 _name = "MG-CADSurf";//"BLSURF";
248 _shapeType = (1 << TopAbs_FACE); // 1 bit /shape type
249 _compatibleHypothesis.push_back(BLSURFPlugin_Hypothesis::GetHypType());
250 _compatibleHypothesis.push_back(StdMeshers_ViscousLayers2D::GetHypType());
251 _requireDiscreteBoundary = false;
252 _onlyUnaryInput = false;
254 _supportSubmeshes = true;
256 smeshGen_i = SMESH_Gen_i::GetSMESHGen();
257 CORBA::Object_var anObject = smeshGen_i->GetNS()->Resolve("/myStudyManager");
258 SALOMEDS::StudyManager_var aStudyMgr = SALOMEDS::StudyManager::_narrow(anObject);
260 MESSAGE("studyid = " << _studyId);
263 myStudy = aStudyMgr->GetStudyByID(_studyId);
264 if ( !myStudy->_is_nil() )
265 MESSAGE("myStudy->StudyId() = " << myStudy->StudyId());
267 /* Initialize the Python interpreter */
268 assert(Py_IsInitialized());
269 PyGILState_STATE gstate;
270 gstate = PyGILState_Ensure();
273 main_mod = PyImport_AddModule("__main__");
276 main_dict = PyModule_GetDict(main_mod);
278 PyRun_SimpleString("from math import *");
279 PyGILState_Release(gstate);
281 FacesWithSizeMap.Clear();
282 FaceId2SizeMap.clear();
283 EdgesWithSizeMap.Clear();
284 EdgeId2SizeMap.clear();
285 VerticesWithSizeMap.Clear();
286 VertexId2SizeMap.clear();
287 FaceId2PythonSmp.clear();
288 EdgeId2PythonSmp.clear();
289 VertexId2PythonSmp.clear();
290 FaceId2AttractorCoords.clear();
291 FaceId2ClassAttractor.clear();
292 FaceIndex2ClassAttractor.clear();
293 FacesWithEnforcedVertices.Clear();
294 FaceId2EnforcedVertexCoords.clear();
295 EnfVertexCoords2ProjVertex.clear();
296 EnfVertexCoords2EnfVertexList.clear();
298 _compute_canceled = false;
301 //=============================================================================
305 //=============================================================================
307 BLSURFPlugin_BLSURF::~BLSURFPlugin_BLSURF()
309 MESSAGE("BLSURFPlugin_BLSURF::~BLSURFPlugin_BLSURF");
313 //=============================================================================
317 //=============================================================================
319 bool BLSURFPlugin_BLSURF::CheckHypothesis
321 const TopoDS_Shape& aShape,
322 SMESH_Hypothesis::Hypothesis_Status& aStatus)
325 _haveViscousLayers = false;
327 list<const SMESHDS_Hypothesis*>::const_iterator itl;
328 const SMESHDS_Hypothesis* theHyp;
330 const list<const SMESHDS_Hypothesis*>& hyps = GetUsedHypothesis(aMesh, aShape,
331 /*ignoreAuxiliary=*/false);
332 aStatus = SMESH_Hypothesis::HYP_OK;
335 return true; // can work with no hypothesis
338 for ( itl = hyps.begin(); itl != hyps.end() && ( aStatus == HYP_OK ); ++itl )
341 string hypName = theHyp->GetName();
342 if ( hypName == BLSURFPlugin_Hypothesis::GetHypType() )
344 _hypothesis = static_cast<const BLSURFPlugin_Hypothesis*> (theHyp);
346 if ( _hypothesis->GetPhysicalMesh() == BLSURFPlugin_Hypothesis::DefaultSize &&
347 _hypothesis->GetGeometricMesh() == BLSURFPlugin_Hypothesis::DefaultGeom )
348 // hphy_flag = 0 and hgeo_flag = 0 is not allowed (spec)
349 aStatus = SMESH_Hypothesis::HYP_BAD_PARAMETER;
351 else if ( hypName == StdMeshers_ViscousLayers2D::GetHypType() )
353 if ( !_haveViscousLayers )
355 if ( error( StdMeshers_ViscousLayers2D::CheckHypothesis( aMesh, aShape, aStatus )))
356 _haveViscousLayers = true;
361 aStatus = SMESH_Hypothesis::HYP_INCOMPATIBLE;
364 return aStatus == SMESH_Hypothesis::HYP_OK;
367 //=============================================================================
369 * Pass parameters to MG-CADSurf
371 //=============================================================================
373 inline std::string val_to_string(double d)
375 std::ostringstream o;
380 inline std::string val_to_string_rel(double d)
382 std::ostringstream o;
388 inline std::string val_to_string(int i)
390 std::ostringstream o;
395 inline std::string val_to_string_rel(int i)
397 std::ostringstream o;
403 double _smp_phy_size;
404 status_t size_on_surface(integer face_id, real *uv, real *size, void *user_data);
405 status_t size_on_edge(integer edge_id, real t, real *size, void *user_data);
406 status_t size_on_vertex(integer vertex_id, real *size, void *user_data);
412 /////////////////////////////////////////////////////////
413 projectionPoint getProjectionPoint(const TopoDS_Face& face, const gp_Pnt& point)
415 projectionPoint myPoint;
416 Handle(Geom_Surface) surface = BRep_Tool::Surface(face);
417 GeomAPI_ProjectPointOnSurf projector( point, surface );
418 if ( !projector.IsDone() || projector.NbPoints()==0 )
419 throw "getProjectionPoint: Can't project";
421 Quantity_Parameter u,v;
422 projector.LowerDistanceParameters(u,v);
423 myPoint.uv = gp_XY(u,v);
424 gp_Pnt aPnt = projector.NearestPoint();
425 myPoint.xyz = gp_XYZ(aPnt.X(),aPnt.Y(),aPnt.Z());
429 /////////////////////////////////////////////////////////
431 /////////////////////////////////////////////////////////
432 double getT(const TopoDS_Edge& edge, const gp_Pnt& point)
435 Handle(Geom_Curve) curve = BRep_Tool::Curve(edge, f,l);
436 GeomAPI_ProjectPointOnCurve projector( point, curve);
437 if ( projector.NbPoints() == 0 )
439 return projector.LowerDistanceParameter();
442 /////////////////////////////////////////////////////////
443 TopoDS_Shape BLSURFPlugin_BLSURF::entryToShape(std::string entry)
445 MESSAGE("BLSURFPlugin_BLSURF::entryToShape "<<entry );
446 GEOM::GEOM_Object_var aGeomObj;
447 TopoDS_Shape S = TopoDS_Shape();
448 SALOMEDS::SObject_var aSObj = myStudy->FindObjectID( entry.c_str() );
449 if (!aSObj->_is_nil()) {
450 CORBA::Object_var obj = aSObj->GetObject();
451 aGeomObj = GEOM::GEOM_Object::_narrow(obj);
454 if ( !aGeomObj->_is_nil() )
455 S = smeshGen_i->GeomObjectToShape( aGeomObj.in() );
459 void _createEnforcedVertexOnFace(TopoDS_Face faceShape, gp_Pnt aPnt, BLSURFPlugin_Hypothesis::TEnfVertex *enfVertex)
461 BLSURFPlugin_Hypothesis::TEnfVertexCoords enf_coords, coords, s_coords;
466 // Get the (u,v) values of the enforced vertex on the face
467 projectionPoint myPoint = getProjectionPoint(faceShape,aPnt);
469 MESSAGE("Enforced Vertex: " << aPnt.X() << ", " << aPnt.Y() << ", " << aPnt.Z());
470 MESSAGE("Projected Vertex: " << myPoint.xyz.X() << ", " << myPoint.xyz.Y() << ", " << myPoint.xyz.Z());
471 MESSAGE("Parametric coordinates: " << myPoint.uv.X() << ", " << myPoint.uv.Y() );
473 enf_coords.push_back(aPnt.X());
474 enf_coords.push_back(aPnt.Y());
475 enf_coords.push_back(aPnt.Z());
477 coords.push_back(myPoint.uv.X());
478 coords.push_back(myPoint.uv.Y());
479 coords.push_back(myPoint.xyz.X());
480 coords.push_back(myPoint.xyz.Y());
481 coords.push_back(myPoint.xyz.Z());
483 s_coords.push_back(myPoint.xyz.X());
484 s_coords.push_back(myPoint.xyz.Y());
485 s_coords.push_back(myPoint.xyz.Z());
487 // Save pair projected vertex / enf vertex
488 MESSAGE("Storing pair projected vertex / enf vertex:");
489 MESSAGE("("<< myPoint.xyz.X() << ", " << myPoint.xyz.Y() << ", " << myPoint.xyz.Z() <<") / (" << aPnt.X() << ", " << aPnt.Y() << ", " << aPnt.Z()<<")");
490 EnfVertexCoords2ProjVertex[s_coords] = enf_coords;
491 MESSAGE("Group name is: \"" << enfVertex->grpName << "\"");
492 pair<BLSURFPlugin_Hypothesis::TEnfVertexList::iterator,bool> ret;
493 BLSURFPlugin_Hypothesis::TEnfVertexList::iterator it;
494 ret = EnfVertexCoords2EnfVertexList[s_coords].insert(enfVertex);
495 if (ret.second == false) {
497 (*it)->grpName = enfVertex->grpName;
501 if (! FacesWithEnforcedVertices.Contains(faceShape)) {
502 key = FacesWithEnforcedVertices.Add(faceShape);
505 key = FacesWithEnforcedVertices.FindIndex(faceShape);
508 // If a node is already created by an attractor, do not create enforced vertex
509 int attractorKey = FacesWithSizeMap.FindIndex(faceShape);
510 bool sameAttractor = false;
511 if (attractorKey >= 0)
512 if (FaceId2AttractorCoords.count(attractorKey) > 0)
513 if (FaceId2AttractorCoords[attractorKey] == coords)
514 sameAttractor = true;
516 if (FaceId2EnforcedVertexCoords.find(key) != FaceId2EnforcedVertexCoords.end()) {
517 MESSAGE("Map of enf. vertex has key " << key)
518 MESSAGE("Enf. vertex list size is: " << FaceId2EnforcedVertexCoords[key].size())
520 FaceId2EnforcedVertexCoords[key].insert(coords); // there should be no redondant coords here (see std::set management)
522 MESSAGE("An attractor node is already defined: I don't add the enforced vertex");
523 MESSAGE("New Enf. vertex list size is: " << FaceId2EnforcedVertexCoords[key].size())
526 MESSAGE("Map of enf. vertex has not key " << key << ": creating it")
527 if (! sameAttractor) {
528 BLSURFPlugin_Hypothesis::TEnfVertexCoordsList ens;
530 FaceId2EnforcedVertexCoords[key] = ens;
533 MESSAGE("An attractor node is already defined: I don't add the enforced vertex");
537 /////////////////////////////////////////////////////////
538 void BLSURFPlugin_BLSURF::createEnforcedVertexOnFace(TopoDS_Shape faceShape, BLSURFPlugin_Hypothesis::TEnfVertexList enfVertexList)
540 BLSURFPlugin_Hypothesis::TEnfVertex* enfVertex;
543 BLSURFPlugin_Hypothesis::TEnfVertexList::const_iterator enfVertexListIt = enfVertexList.begin();
545 for( ; enfVertexListIt != enfVertexList.end() ; ++enfVertexListIt ) {
546 enfVertex = *enfVertexListIt;
547 // Case of manual coords
548 if (enfVertex->coords.size() != 0) {
549 aPnt.SetCoord(enfVertex->coords[0],enfVertex->coords[1],enfVertex->coords[2]);
550 _createEnforcedVertexOnFace( TopoDS::Face(faceShape), aPnt, enfVertex);
553 // Case of geom vertex coords
554 if (enfVertex->geomEntry != "") {
555 TopoDS_Shape GeomShape = entryToShape(enfVertex->geomEntry);
556 TopAbs_ShapeEnum GeomType = GeomShape.ShapeType();
557 if (GeomType == TopAbs_VERTEX){
558 aPnt = BRep_Tool::Pnt(TopoDS::Vertex(GeomShape));
559 _createEnforcedVertexOnFace( TopoDS::Face(faceShape), aPnt, enfVertex);
562 if (GeomType == TopAbs_COMPOUND){
563 for (TopoDS_Iterator it (GeomShape); it.More(); it.Next()){
564 if (it.Value().ShapeType() == TopAbs_VERTEX){
565 aPnt = BRep_Tool::Pnt(TopoDS::Vertex(it.Value()));
566 _createEnforcedVertexOnFace( TopoDS::Face(faceShape), aPnt, enfVertex);
574 /////////////////////////////////////////////////////////
575 void createAttractorOnFace(TopoDS_Shape GeomShape, std::string AttractorFunction, double defaultSize)
577 MESSAGE("Attractor function: "<< AttractorFunction);
578 double xa, ya, za; // Coordinates of attractor point
579 double a, b; // Attractor parameter
581 bool createNode=false; // To create a node on attractor projection
583 const char *sep = ";";
584 // atIt->second has the following pattern:
585 // ATTRACTOR(xa;ya;za;a;b;True|False;d)
587 // xa;ya;za : coordinates of attractor
588 // a : desired size on attractor
589 // b : distance of influence of attractor
590 // d : distance until which the size remains constant
592 // We search the parameters in the string
594 pos1 = AttractorFunction.find(sep);
595 if (pos1!=string::npos)
596 xa = atof(AttractorFunction.substr(10, pos1-10).c_str());
598 pos2 = AttractorFunction.find(sep, pos1+1);
599 if (pos2!=string::npos) {
600 ya = atof(AttractorFunction.substr(pos1+1, pos2-pos1-1).c_str());
604 pos2 = AttractorFunction.find(sep, pos1+1);
605 if (pos2!=string::npos) {
606 za = atof(AttractorFunction.substr(pos1+1, pos2-pos1-1).c_str());
610 pos2 = AttractorFunction.find(sep, pos1+1);
611 if (pos2!=string::npos) {
612 a = atof(AttractorFunction.substr(pos1+1, pos2-pos1-1).c_str());
616 pos2 = AttractorFunction.find(sep, pos1+1);
617 if (pos2!=string::npos) {
618 b = atof(AttractorFunction.substr(pos1+1, pos2-pos1-1).c_str());
622 pos2 = AttractorFunction.find(sep, pos1+1);
623 if (pos2!=string::npos) {
624 string createNodeStr = AttractorFunction.substr(pos1+1, pos2-pos1-1);
625 MESSAGE("createNode: " << createNodeStr);
626 createNode = (AttractorFunction.substr(pos1+1, pos2-pos1-1) == "True");
630 pos2 = AttractorFunction.find(")");
631 if (pos2!=string::npos) {
632 d = atof(AttractorFunction.substr(pos1+1, pos2-pos1-1).c_str());
635 // Get the (u,v) values of the attractor on the face
636 projectionPoint myPoint = getProjectionPoint(TopoDS::Face(GeomShape),gp_Pnt(xa,ya,za));
637 gp_XY uvPoint = myPoint.uv;
638 gp_XYZ xyzPoint = myPoint.xyz;
639 Standard_Real u0 = uvPoint.X();
640 Standard_Real v0 = uvPoint.Y();
641 Standard_Real x0 = xyzPoint.X();
642 Standard_Real y0 = xyzPoint.Y();
643 Standard_Real z0 = xyzPoint.Z();
644 std::vector<double> coords;
645 coords.push_back(u0);
646 coords.push_back(v0);
647 coords.push_back(x0);
648 coords.push_back(y0);
649 coords.push_back(z0);
650 // We construct the python function
651 ostringstream attractorFunctionStream;
652 attractorFunctionStream << "def f(u,v): return ";
653 attractorFunctionStream << defaultSize << "-(" << defaultSize <<"-" << a << ")";
654 //attractorFunctionStream << "*exp(-((u-("<<u0<<"))*(u-("<<u0<<"))+(v-("<<v0<<"))*(v-("<<v0<<")))/(" << b << "*" << b <<"))";
655 // rnc: make possible to keep the size constant until
656 // a defined distance. Distance is expressed as the positiv part
657 // of r-d where r is the distance to (u0,v0)
658 attractorFunctionStream << "*exp(-(0.5*(sqrt((u-"<<u0<<")**2+(v-"<<v0<<")**2)-"<<d<<"+abs(sqrt((u-"<<u0<<")**2+(v-"<<v0<<")**2)-"<<d<<"))/(" << b << "))**2)";
660 MESSAGE("Python function for attractor:" << std::endl << attractorFunctionStream.str());
663 if (! FacesWithSizeMap.Contains(TopoDS::Face(GeomShape))) {
664 key = FacesWithSizeMap.Add(TopoDS::Face(GeomShape));
667 key = FacesWithSizeMap.FindIndex(TopoDS::Face(GeomShape));
669 FaceId2SizeMap[key] =attractorFunctionStream.str();
671 MESSAGE("Creating node on ("<<x0<<","<<y0<<","<<z0<<")");
672 FaceId2AttractorCoords[key] = coords;
674 // // Test for new attractors
675 // gp_Pnt myP(xyzPoint);
676 // TopoDS_Vertex myV = BRepBuilderAPI_MakeVertex(myP);
677 // BLSURFPlugin_Attractor myAttractor(TopoDS::Face(GeomShape),myV,200);
678 // myAttractor.SetParameters(a, defaultSize, b, d);
679 // myAttractor.SetType(1);
680 // FaceId2ClassAttractor[key] = myAttractor;
681 // if(FaceId2ClassAttractor[key].GetFace().IsNull()){
682 // MESSAGE("face nulle ");
685 // MESSAGE("face OK");
687 // if (FaceId2ClassAttractor[key].GetAttractorShape().IsNull()){
688 // MESSAGE("pas de point");
691 // MESSAGE("point OK");
694 // One sub-shape to get ids from
695 BLSURFPlugin_BLSURF::TListOfIDs _getSubShapeIDsInMainShape(TopoDS_Shape theMainShape, TopoDS_Shape theSubShape,
696 TopAbs_ShapeEnum theShapeType)
698 BLSURFPlugin_BLSURF::TListOfIDs face_ids;
699 TopTools_IndexedMapOfShape anIndices;
701 TopExp::MapShapes(theMainShape, theShapeType, anIndices);
703 // Standard_Boolean result = BRepTools::Write(theMainShape,"main_shape.brep");
705 for (TopExp_Explorer face_iter(theSubShape,theShapeType);face_iter.More();face_iter.Next())
707 int face_id = anIndices.FindIndex(face_iter.Current());
709 throw SALOME_Exception ( SMESH_Comment("Sub_shape not found in main_shape"));
710 face_ids.push_back(face_id);
711 // std::ostringstream o;
712 // o << "face_" << face_id << ".brep";
713 // std::string face_name = o.str();
714 // const TopoDS_Face& face = TopoDS::Face(face_iter.Current());
715 // Standard_Boolean result = BRepTools::Write(face,face_name.c_str());
721 BLSURFPlugin_BLSURF::TListOfIDs _getSubShapeIDsInMainShape(SMESH_Mesh* theMesh,
722 TopoDS_Shape theSubShape,
723 TopAbs_ShapeEnum theShapeType)
725 BLSURFPlugin_BLSURF::TListOfIDs face_ids;
727 for (TopExp_Explorer face_iter(theSubShape,theShapeType);face_iter.More();face_iter.Next())
729 int face_id = theMesh->GetMeshDS()->ShapeToIndex(face_iter.Current());
731 throw SALOME_Exception ( SMESH_Comment("Sub_shape not found in main_shape"));
732 face_ids.push_back(face_id);
738 void BLSURFPlugin_BLSURF::addCoordsFromVertices(const std::vector<std::string> &theVerticesEntries, std::vector<double> &theVerticesCoords)
740 for (std::vector<std::string>::const_iterator it = theVerticesEntries.begin(); it != theVerticesEntries.end(); it++)
742 BLSURFPlugin_Hypothesis::TEntry theVertexEntry = *it;
743 MESSAGE("Vertex entry " << theVertexEntry);
744 addCoordsFromVertex(theVertexEntry, theVerticesCoords);
749 void BLSURFPlugin_BLSURF::addCoordsFromVertex(BLSURFPlugin_Hypothesis::TEntry theVertexEntry, std::vector<double> &theVerticesCoords)
751 if (theVertexEntry!="")
753 TopoDS_Shape aShape = entryToShape(theVertexEntry);
755 gp_Pnt aPnt = BRep_Tool::Pnt( TopoDS::Vertex( aShape ) );
756 double theX, theY, theZ;
761 theVerticesCoords.push_back(theX);
762 theVerticesCoords.push_back(theY);
763 theVerticesCoords.push_back(theZ);
767 /////////////////////////////////////////////////////////
768 void BLSURFPlugin_BLSURF::createPreCadFacesPeriodicity(TopoDS_Shape theGeomShape, const BLSURFPlugin_Hypothesis::TPreCadPeriodicity &preCadPeriodicity)
770 MESSAGE("BLSURFPlugin_BLSURF::createPreCadFacesPeriodicity");
772 TopoDS_Shape geomShape1 = entryToShape(preCadPeriodicity.shape1Entry);
773 TopoDS_Shape geomShape2 = entryToShape(preCadPeriodicity.shape2Entry);
775 TListOfIDs theFace1_ids = _getSubShapeIDsInMainShape(theGeomShape, geomShape1, TopAbs_FACE);
776 TListOfIDs theFace2_ids = _getSubShapeIDsInMainShape(theGeomShape, geomShape2, TopAbs_FACE);
778 TPreCadPeriodicityIDs preCadFacesPeriodicityIDs;
779 preCadFacesPeriodicityIDs.shape1IDs = theFace1_ids;
780 preCadFacesPeriodicityIDs.shape2IDs = theFace2_ids;
782 MESSAGE("preCadPeriodicity.theSourceVerticesEntries.size(): " << preCadPeriodicity.theSourceVerticesEntries.size());
783 MESSAGE("preCadPeriodicity.theTargetVerticesEntries.size(): " << preCadPeriodicity.theTargetVerticesEntries.size());
785 addCoordsFromVertices(preCadPeriodicity.theSourceVerticesEntries, preCadFacesPeriodicityIDs.theSourceVerticesCoords);
786 addCoordsFromVertices(preCadPeriodicity.theTargetVerticesEntries, preCadFacesPeriodicityIDs.theTargetVerticesCoords);
788 MESSAGE("preCadFacesPeriodicityIDs.theSourceVerticesCoords.size(): " << preCadFacesPeriodicityIDs.theSourceVerticesCoords.size());
789 MESSAGE("preCadFacesPeriodicityIDs.theTargetVerticesCoords.size(): " << preCadFacesPeriodicityIDs.theTargetVerticesCoords.size());
791 _preCadFacesIDsPeriodicityVector.push_back(preCadFacesPeriodicityIDs);
792 MESSAGE("_preCadFacesIDsPeriodicityVector.size() = " << _preCadFacesIDsPeriodicityVector.size());
793 MESSAGE("BLSURFPlugin_BLSURF::createPreCadFacesPeriodicity END");
797 /////////////////////////////////////////////////////////
798 void BLSURFPlugin_BLSURF::createPreCadEdgesPeriodicity(TopoDS_Shape theGeomShape, const BLSURFPlugin_Hypothesis::TPreCadPeriodicity &preCadPeriodicity)
800 MESSAGE("BLSURFPlugin_BLSURF::createPreCadEdgesPeriodicity");
802 TopoDS_Shape geomShape1 = entryToShape(preCadPeriodicity.shape1Entry);
803 TopoDS_Shape geomShape2 = entryToShape(preCadPeriodicity.shape2Entry);
805 TListOfIDs theEdge1_ids = _getSubShapeIDsInMainShape(theGeomShape, geomShape1, TopAbs_EDGE);
806 TListOfIDs theEdge2_ids = _getSubShapeIDsInMainShape(theGeomShape, geomShape2, TopAbs_EDGE);
808 TPreCadPeriodicityIDs preCadEdgesPeriodicityIDs;
809 preCadEdgesPeriodicityIDs.shape1IDs = theEdge1_ids;
810 preCadEdgesPeriodicityIDs.shape2IDs = theEdge2_ids;
812 addCoordsFromVertices(preCadPeriodicity.theSourceVerticesEntries, preCadEdgesPeriodicityIDs.theSourceVerticesCoords);
813 addCoordsFromVertices(preCadPeriodicity.theTargetVerticesEntries, preCadEdgesPeriodicityIDs.theTargetVerticesCoords);
815 _preCadEdgesIDsPeriodicityVector.push_back(preCadEdgesPeriodicityIDs);
816 MESSAGE("_preCadEdgesIDsPeriodicityVector.size() = " << _preCadEdgesIDsPeriodicityVector.size());
817 MESSAGE("BLSURFPlugin_BLSURF::createPreCadEdgesPeriodicity END");
822 /////////////////////////////////////////////////////////
824 void BLSURFPlugin_BLSURF::SetParameters(const BLSURFPlugin_Hypothesis* hyp,
825 cadsurf_session_t * css,
826 const TopoDS_Shape& theGeomShape
830 // Clear map so that it is not stored in the algorithm with old enforced vertices in it
831 EnfVertexCoords2EnfVertexList.clear();
833 double diagonal = SMESH_Mesh::GetShapeDiagonalSize( theGeomShape );
834 double bbSegmentation = _gen->GetBoundaryBoxSegmentation();
835 int _physicalMesh = BLSURFPlugin_Hypothesis::GetDefaultPhysicalMesh();
836 int _geometricMesh = BLSURFPlugin_Hypothesis::GetDefaultGeometricMesh();
837 double _phySize = BLSURFPlugin_Hypothesis::GetDefaultPhySize(diagonal, bbSegmentation);
838 bool _phySizeRel = BLSURFPlugin_Hypothesis::GetDefaultPhySizeRel();
839 double _minSize = BLSURFPlugin_Hypothesis::GetDefaultMinSize(diagonal);
840 bool _minSizeRel = BLSURFPlugin_Hypothesis::GetDefaultMinSizeRel();
841 double _maxSize = BLSURFPlugin_Hypothesis::GetDefaultMaxSize(diagonal);
842 bool _maxSizeRel = BLSURFPlugin_Hypothesis::GetDefaultMaxSizeRel();
843 double _use_gradation = BLSURFPlugin_Hypothesis::GetDefaultUseGradation();
844 double _gradation = BLSURFPlugin_Hypothesis::GetDefaultGradation();
845 double _use_volume_gradation = BLSURFPlugin_Hypothesis::GetDefaultUseVolumeGradation();
846 double _volume_gradation = BLSURFPlugin_Hypothesis::GetDefaultVolumeGradation();
847 bool _quadAllowed = BLSURFPlugin_Hypothesis::GetDefaultQuadAllowed();
848 double _angleMesh = BLSURFPlugin_Hypothesis::GetDefaultAngleMesh();
849 double _chordalError = BLSURFPlugin_Hypothesis::GetDefaultChordalError(diagonal);
850 bool _anisotropic = BLSURFPlugin_Hypothesis::GetDefaultAnisotropic();
851 double _anisotropicRatio = BLSURFPlugin_Hypothesis::GetDefaultAnisotropicRatio();
852 bool _removeTinyEdges = BLSURFPlugin_Hypothesis::GetDefaultRemoveTinyEdges();
853 double _tinyEdgeLength = BLSURFPlugin_Hypothesis::GetDefaultTinyEdgeLength(diagonal);
854 bool _optimiseTinyEdges = BLSURFPlugin_Hypothesis::GetDefaultOptimiseTinyEdges();
855 double _tinyEdgeOptimisLength = BLSURFPlugin_Hypothesis::GetDefaultTinyEdgeOptimisationLength(diagonal);
856 bool _correctSurfaceIntersec= BLSURFPlugin_Hypothesis::GetDefaultCorrectSurfaceIntersection();
857 double _corrSurfaceIntersCost = BLSURFPlugin_Hypothesis::GetDefaultCorrectSurfaceIntersectionMaxCost();
858 bool _badElementRemoval = BLSURFPlugin_Hypothesis::GetDefaultBadElementRemoval();
859 double _badElementAspectRatio = BLSURFPlugin_Hypothesis::GetDefaultBadElementAspectRatio();
860 bool _optimizeMesh = BLSURFPlugin_Hypothesis::GetDefaultOptimizeMesh();
861 bool _quadraticMesh = BLSURFPlugin_Hypothesis::GetDefaultQuadraticMesh();
862 int _verb = BLSURFPlugin_Hypothesis::GetDefaultVerbosity();
863 //int _topology = BLSURFPlugin_Hypothesis::GetDefaultTopology();
866 //int _precadMergeEdges = BLSURFPlugin_Hypothesis::GetDefaultPreCADMergeEdges();
867 int _precadRemoveTinyUVEdges = BLSURFPlugin_Hypothesis::GetDefaultPreCADRemoveTinyUVEdges();
868 //int _precadRemoveDuplicateCADFaces = BLSURFPlugin_Hypothesis::GetDefaultPreCADRemoveDuplicateCADFaces();
869 //int _precadProcess3DTopology = BLSURFPlugin_Hypothesis::GetDefaultPreCADProcess3DTopology();
870 //int _precadDiscardInput = BLSURFPlugin_Hypothesis::GetDefaultPreCADDiscardInput();
874 MESSAGE("BLSURFPlugin_BLSURF::SetParameters");
875 _physicalMesh = (int) hyp->GetPhysicalMesh();
876 _geometricMesh = (int) hyp->GetGeometricMesh();
877 if (hyp->GetPhySize() > 0) {
878 _phySize = hyp->GetPhySize();
879 // if user size is not explicitly specified, "relative" flag is ignored
880 _phySizeRel = hyp->IsPhySizeRel();
882 if (hyp->GetMinSize() > 0) {
883 _minSize = hyp->GetMinSize();
884 // if min size is not explicitly specified, "relative" flag is ignored
885 _minSizeRel = hyp->IsMinSizeRel();
887 if (hyp->GetMaxSize() > 0) {
888 _maxSize = hyp->GetMaxSize();
889 // if max size is not explicitly specified, "relative" flag is ignored
890 _maxSizeRel = hyp->IsMaxSizeRel();
892 _use_gradation = hyp->GetUseGradation();
893 if (hyp->GetGradation() > 0 && _use_gradation)
894 _gradation = hyp->GetGradation();
895 _use_volume_gradation = hyp->GetUseVolumeGradation();
896 if (hyp->GetVolumeGradation() > 0 && _use_volume_gradation )
897 _volume_gradation = hyp->GetVolumeGradation();
898 _quadAllowed = hyp->GetQuadAllowed();
899 if (hyp->GetAngleMesh() > 0)
900 _angleMesh = hyp->GetAngleMesh();
901 if (hyp->GetChordalError() > 0)
902 _chordalError = hyp->GetChordalError();
903 _anisotropic = hyp->GetAnisotropic();
904 if (hyp->GetAnisotropicRatio() >= 0)
905 _anisotropicRatio = hyp->GetAnisotropicRatio();
906 _removeTinyEdges = hyp->GetRemoveTinyEdges();
907 if (hyp->GetTinyEdgeLength() > 0)
908 _tinyEdgeLength = hyp->GetTinyEdgeLength();
909 _optimiseTinyEdges = hyp->GetOptimiseTinyEdges();
910 if (hyp->GetTinyEdgeOptimisationLength() > 0)
911 _tinyEdgeOptimisLength = hyp->GetTinyEdgeOptimisationLength();
912 _correctSurfaceIntersec = hyp->GetCorrectSurfaceIntersection();
913 if (hyp->GetCorrectSurfaceIntersectionMaxCost() > 0)
914 _corrSurfaceIntersCost = hyp->GetCorrectSurfaceIntersectionMaxCost();
915 _badElementRemoval = hyp->GetBadElementRemoval();
916 if (hyp->GetBadElementAspectRatio() >= 0)
917 _badElementAspectRatio = hyp->GetBadElementAspectRatio();
918 _optimizeMesh = hyp->GetOptimizeMesh();
919 _quadraticMesh = hyp->GetQuadraticMesh();
920 _verb = hyp->GetVerbosity();
921 //_topology = (int) hyp->GetTopology();
923 //_precadMergeEdges = hyp->GetPreCADMergeEdges();
924 _precadRemoveTinyUVEdges = hyp->GetPreCADRemoveTinyUVEdges();
925 //_precadRemoveDuplicateCADFaces = hyp->GetPreCADRemoveDuplicateCADFaces();
926 //_precadProcess3DTopology = hyp->GetPreCADProcess3DTopology();
927 //_precadDiscardInput = hyp->GetPreCADDiscardInput();
929 const BLSURFPlugin_Hypothesis::TOptionValues& opts = hyp->GetOptionValues();
930 BLSURFPlugin_Hypothesis::TOptionValues::const_iterator opIt;
931 for ( opIt = opts.begin(); opIt != opts.end(); ++opIt )
932 if ( !opIt->second.empty() ) {
933 MESSAGE("cadsurf_set_param(): " << opIt->first << " = " << opIt->second);
934 set_param(css, opIt->first.c_str(), opIt->second.c_str());
937 const BLSURFPlugin_Hypothesis::TOptionValues& custom_opts = hyp->GetCustomOptionValues();
938 for ( opIt = custom_opts.begin(); opIt != custom_opts.end(); ++opIt )
939 if ( !opIt->second.empty() ) {
940 MESSAGE("cadsurf_set_param(): " << opIt->first << " = " << opIt->second);
941 set_param(css, opIt->first.c_str(), opIt->second.c_str());
944 const BLSURFPlugin_Hypothesis::TOptionValues& preCADopts = hyp->GetPreCADOptionValues();
945 for ( opIt = preCADopts.begin(); opIt != preCADopts.end(); ++opIt )
946 if ( !opIt->second.empty() ) {
947 MESSAGE("cadsurf_set_param(): " << opIt->first << " = " << opIt->second);
948 set_param(css, opIt->first.c_str(), opIt->second.c_str());
952 if ( BLSURFPlugin_Hypothesis::HasPreCADOptions( hyp ))
954 cadsurf_set_param(css, "use_precad", "yes" ); // for young versions
956 // PreProcessor (formerly PreCAD) -- commented params are preCADoptions (since 0023307)
957 //set_param(css, "merge_edges", _precadMergeEdges ? "yes" : "no");
958 set_param(css, "remove_tiny_uv_edges", _precadRemoveTinyUVEdges ? "yes" : "no");
959 //set_param(css, "remove_duplicate_cad_faces", _precadRemoveDuplicateCADFaces ? "yes" : "no");
960 //set_param(css, "process_3d_topology", _precadProcess3DTopology ? "1" : "0");
961 //set_param(css, "discard_input_topology", _precadDiscardInput ? "1" : "0");
962 //set_param(css, "max_number_of_points_per_patch", "1000000");
964 bool useGradation = false;
965 switch (_physicalMesh)
967 case BLSURFPlugin_Hypothesis::PhysicalGlobalSize:
968 set_param(css, "physical_size_mode", "global");
969 set_param(css, "global_physical_size", _phySizeRel ? val_to_string_rel(_phySize).c_str() : val_to_string(_phySize).c_str());
971 case BLSURFPlugin_Hypothesis::PhysicalLocalSize:
972 set_param(css, "physical_size_mode", "local");
973 set_param(css, "global_physical_size", _phySizeRel ? val_to_string_rel(_phySize).c_str() : val_to_string(_phySize).c_str());
977 set_param(css, "physical_size_mode", "none");
980 switch (_geometricMesh)
982 case BLSURFPlugin_Hypothesis::GeometricalGlobalSize:
983 set_param(css, "geometric_size_mode", "global");
984 set_param(css, "geometric_approximation", val_to_string(_angleMesh).c_str());
985 set_param(css, "chordal_error", val_to_string(_chordalError).c_str());
988 case BLSURFPlugin_Hypothesis::GeometricalLocalSize:
989 set_param(css, "geometric_size_mode", "local");
990 set_param(css, "geometric_approximation", val_to_string(_angleMesh).c_str());
991 set_param(css, "chordal_error", val_to_string(_chordalError).c_str());
995 set_param(css, "geometric_size_mode", "none");
998 if ( hyp && hyp->GetPhySize() > 0 ) {
999 // user size is explicitly specified via hypothesis parameters
1000 // min and max sizes should be compared with explicitly specified user size
1001 // - compute absolute min size
1002 double mins = _minSizeRel ? _minSize * diagonal : _minSize;
1003 // - min size should not be greater than user size
1004 if ( _phySize < mins )
1005 set_param(css, "min_size", _phySizeRel ? val_to_string_rel(_phySize).c_str() : val_to_string(_phySize).c_str());
1007 set_param(css, "min_size", _minSizeRel ? val_to_string_rel(_minSize).c_str() : val_to_string(_minSize).c_str());
1008 // - compute absolute max size
1009 double maxs = _maxSizeRel ? _maxSize * diagonal : _maxSize;
1010 // - max size should not be less than user size
1011 if ( _phySize > maxs )
1012 set_param(css, "max_size", _phySizeRel ? val_to_string_rel(_phySize).c_str() : val_to_string(_phySize).c_str());
1014 set_param(css, "max_size", _maxSizeRel ? val_to_string_rel(_maxSize).c_str() : val_to_string(_maxSize).c_str());
1017 // user size is not explicitly specified
1018 // - if minsize is not explicitly specified, we pass default value computed automatically, in this case "relative" flag is ignored
1019 set_param(css, "min_size", _minSizeRel ? val_to_string_rel(_minSize).c_str() : val_to_string(_minSize).c_str());
1020 // - if maxsize is not explicitly specified, we pass default value computed automatically, in this case "relative" flag is ignored
1021 set_param(css, "max_size", _maxSizeRel ? val_to_string_rel(_maxSize).c_str() : val_to_string(_maxSize).c_str());
1023 // anisotropic and quadrangle mesh requires disabling gradation
1024 if ( _anisotropic && _quadAllowed )
1025 useGradation = false; // limitation of V1.3
1026 if ( useGradation && _use_gradation )
1027 set_param(css, "gradation", val_to_string(_gradation).c_str());
1028 if ( useGradation && _use_volume_gradation )
1029 set_param(css, "volume_gradation", val_to_string(_volume_gradation).c_str());
1030 set_param(css, "element_generation", _quadAllowed ? "quad_dominant" : "triangle");
1033 set_param(css, "metric", _anisotropic ? "anisotropic" : "isotropic");
1035 set_param(css, "anisotropic_ratio", val_to_string(_anisotropicRatio).c_str());
1036 set_param(css, "remove_tiny_edges", _removeTinyEdges ? "1" : "0");
1037 if ( _removeTinyEdges )
1038 set_param(css, "tiny_edge_length", val_to_string(_tinyEdgeLength).c_str());
1039 set_param(css, "optimise_tiny_edges", _optimiseTinyEdges ? "1" : "0");
1040 if ( _optimiseTinyEdges )
1041 set_param(css, "tiny_edge_optimisation_length", val_to_string(_tinyEdgeOptimisLength).c_str());
1042 set_param(css, "correct_surface_intersections", _correctSurfaceIntersec ? "1" : "0");
1043 if ( _correctSurfaceIntersec )
1044 set_param(css, "surface_intersections_processing_max_cost", val_to_string(_corrSurfaceIntersCost ).c_str());
1045 set_param(css, "force_bad_surface_element_removal", _badElementRemoval ? "1" : "0");
1046 if ( _badElementRemoval )
1047 set_param(css, "bad_surface_element_aspect_ratio", val_to_string(_badElementAspectRatio).c_str());
1048 set_param(css, "optimisation", _optimizeMesh ? "yes" : "no");
1049 set_param(css, "element_order", _quadraticMesh ? "quadratic" : "linear");
1050 set_param(css, "verbose", val_to_string(_verb).c_str());
1052 _smp_phy_size = _phySizeRel ? _phySize*diagonal : _phySize;
1054 std::cout << "_smp_phy_size = " << _smp_phy_size << std::endl;
1056 if (_physicalMesh == BLSURFPlugin_Hypothesis::PhysicalLocalSize){
1057 TopoDS_Shape GeomShape;
1058 TopoDS_Shape AttShape;
1059 TopAbs_ShapeEnum GeomType;
1061 // Standard Size Maps
1063 MESSAGE("Setting a Size Map");
1064 const BLSURFPlugin_Hypothesis::TSizeMap sizeMaps = BLSURFPlugin_Hypothesis::GetSizeMapEntries(hyp);
1065 BLSURFPlugin_Hypothesis::TSizeMap::const_iterator smIt = sizeMaps.begin();
1066 for ( ; smIt != sizeMaps.end(); ++smIt ) {
1067 if ( !smIt->second.empty() ) {
1068 MESSAGE("cadsurf_set_sizeMap(): " << smIt->first << " = " << smIt->second);
1069 GeomShape = entryToShape(smIt->first);
1070 GeomType = GeomShape.ShapeType();
1071 MESSAGE("Geomtype is " << GeomType);
1074 if (GeomType == TopAbs_COMPOUND) {
1075 for (TopoDS_Iterator it (GeomShape); it.More(); it.Next()){
1077 if (it.Value().ShapeType() == TopAbs_FACE){
1078 HasSizeMapOnFace = true;
1079 if (! FacesWithSizeMap.Contains(TopoDS::Face(it.Value()))) {
1080 key = FacesWithSizeMap.Add(TopoDS::Face(it.Value()));
1083 key = FacesWithSizeMap.FindIndex(TopoDS::Face(it.Value()));
1084 // MESSAGE("Face with key " << key << " already in map");
1086 FaceId2SizeMap[key] = smIt->second;
1089 if (it.Value().ShapeType() == TopAbs_EDGE){
1090 HasSizeMapOnEdge = true;
1091 HasSizeMapOnFace = true;
1092 if (! EdgesWithSizeMap.Contains(TopoDS::Edge(it.Value()))) {
1093 key = EdgesWithSizeMap.Add(TopoDS::Edge(it.Value()));
1096 key = EdgesWithSizeMap.FindIndex(TopoDS::Edge(it.Value()));
1097 // MESSAGE("Edge with key " << key << " already in map");
1099 EdgeId2SizeMap[key] = smIt->second;
1101 // Group of vertices
1102 if (it.Value().ShapeType() == TopAbs_VERTEX){
1103 HasSizeMapOnVertex = true;
1104 HasSizeMapOnEdge = true;
1105 HasSizeMapOnFace = true;
1106 if (! VerticesWithSizeMap.Contains(TopoDS::Vertex(it.Value()))) {
1107 key = VerticesWithSizeMap.Add(TopoDS::Vertex(it.Value()));
1110 key = VerticesWithSizeMap.FindIndex(TopoDS::Vertex(it.Value()));
1111 MESSAGE("Group of vertices with key " << key << " already in map");
1113 MESSAGE("Group of vertices with key " << key << " has a size map: " << smIt->second);
1114 VertexId2SizeMap[key] = smIt->second;
1119 if (GeomType == TopAbs_FACE){
1120 HasSizeMapOnFace = true;
1121 if (! FacesWithSizeMap.Contains(TopoDS::Face(GeomShape))) {
1122 key = FacesWithSizeMap.Add(TopoDS::Face(GeomShape));
1125 key = FacesWithSizeMap.FindIndex(TopoDS::Face(GeomShape));
1126 // MESSAGE("Face with key " << key << " already in map");
1128 FaceId2SizeMap[key] = smIt->second;
1131 if (GeomType == TopAbs_EDGE){
1132 HasSizeMapOnEdge = true;
1133 HasSizeMapOnFace = true;
1134 if (! EdgesWithSizeMap.Contains(TopoDS::Edge(GeomShape))) {
1135 key = EdgesWithSizeMap.Add(TopoDS::Edge(GeomShape));
1138 key = EdgesWithSizeMap.FindIndex(TopoDS::Edge(GeomShape));
1139 // MESSAGE("Edge with key " << key << " already in map");
1141 EdgeId2SizeMap[key] = smIt->second;
1144 if (GeomType == TopAbs_VERTEX){
1145 HasSizeMapOnVertex = true;
1146 HasSizeMapOnEdge = true;
1147 HasSizeMapOnFace = true;
1148 if (! VerticesWithSizeMap.Contains(TopoDS::Vertex(GeomShape))) {
1149 key = VerticesWithSizeMap.Add(TopoDS::Vertex(GeomShape));
1152 key = VerticesWithSizeMap.FindIndex(TopoDS::Vertex(GeomShape));
1153 MESSAGE("Vertex with key " << key << " already in map");
1155 MESSAGE("Vertex with key " << key << " has a size map: " << smIt->second);
1156 VertexId2SizeMap[key] = smIt->second;
1164 // TODO appeler le constructeur des attracteurs directement ici
1165 MESSAGE("Setting Attractors");
1166 // if ( !_phySizeRel ) {
1167 const BLSURFPlugin_Hypothesis::TSizeMap attractors = BLSURFPlugin_Hypothesis::GetAttractorEntries(hyp);
1168 BLSURFPlugin_Hypothesis::TSizeMap::const_iterator atIt = attractors.begin();
1169 for ( ; atIt != attractors.end(); ++atIt ) {
1170 if ( !atIt->second.empty() ) {
1171 MESSAGE("cadsurf_set_attractor(): " << atIt->first << " = " << atIt->second);
1172 GeomShape = entryToShape(atIt->first);
1173 GeomType = GeomShape.ShapeType();
1175 if (GeomType == TopAbs_COMPOUND){
1176 for (TopoDS_Iterator it (GeomShape); it.More(); it.Next()){
1177 if (it.Value().ShapeType() == TopAbs_FACE){
1178 HasSizeMapOnFace = true;
1179 createAttractorOnFace(it.Value(), atIt->second, _phySizeRel ? _phySize*diagonal : _phySize);
1184 if (GeomType == TopAbs_FACE){
1185 HasSizeMapOnFace = true;
1186 createAttractorOnFace(GeomShape, atIt->second, _phySizeRel ? _phySize*diagonal : _phySize);
1189 if (GeomType == TopAbs_EDGE){
1190 HasSizeMapOnEdge = true;
1191 HasSizeMapOnFace = true;
1192 EdgeId2SizeMap[TopoDS::Edge(GeomShape).HashCode(IntegerLast())] = atIt->second;
1194 if (GeomType == TopAbs_VERTEX){
1195 HasSizeMapOnVertex = true;
1196 HasSizeMapOnEdge = true;
1197 HasSizeMapOnFace = true;
1198 VertexId2SizeMap[TopoDS::Vertex(GeomShape).HashCode(IntegerLast())] = atIt->second;
1205 // MESSAGE("Impossible to create the attractors when the physical size is relative");
1208 // temporary commented out for testing
1210 // - Fill in the BLSURFPlugin_Hypothesis::TAttractorMap map in the hypothesis
1211 // - Uncomment and complete this part to construct the attractors from the attractor shape and the passed parameters on each face of the map
1212 // - To do this use the public methodss: SetParameters(several double parameters) and SetType(int type)
1214 // - Construct the attractors with an empty dist. map in the hypothesis
1215 // - build the map here for each face with an attractor set and only if the attractor shape as changed since the last call to _buildmap()
1216 // -> define a bool _mapbuilt in the class that is set to false by default and set to true when calling _buildmap() OK
1218 theNbAttractors = 0;
1219 const BLSURFPlugin_Hypothesis::TAttractorMap class_attractors = BLSURFPlugin_Hypothesis::GetClassAttractorEntries(hyp);
1221 BLSURFPlugin_Hypothesis::TAttractorMap::const_iterator AtIt = class_attractors.begin();
1222 for ( ; AtIt != class_attractors.end(); ++AtIt ) {
1223 if ( !AtIt->second->Empty() ) {
1224 // MESSAGE("cadsurf_set_attractor(): " << AtIt->first << " = " << AtIt->second);
1225 GeomShape = entryToShape(AtIt->first);
1226 if ( !SMESH_MesherHelper::IsSubShape( GeomShape, theGeomShape ))
1228 AttShape = AtIt->second->GetAttractorShape();
1229 GeomType = GeomShape.ShapeType();
1231 // if (GeomType == TopAbs_COMPOUND){
1232 // for (TopoDS_Iterator it (GeomShape); it.More(); it.Next()){
1233 // if (it.Value().ShapeType() == TopAbs_FACE){
1234 // HasAttractorOnFace = true;
1235 // myAttractor = BLSURFPluginAttractor(GeomShape, AttShape);
1240 if (GeomType == TopAbs_FACE
1241 && (AttShape.ShapeType() == TopAbs_VERTEX
1242 || AttShape.ShapeType() == TopAbs_EDGE
1243 || AttShape.ShapeType() == TopAbs_WIRE
1244 || AttShape.ShapeType() == TopAbs_COMPOUND) ){
1245 HasSizeMapOnFace = true;
1247 key = FacesWithSizeMap.Add(TopoDS::Face(GeomShape) );
1249 FaceId2ClassAttractor[key].push_back( AtIt->second );
1253 MESSAGE("Wrong shape type !!")
1261 // Enforced Vertices
1263 MESSAGE("Setting Enforced Vertices");
1264 const BLSURFPlugin_Hypothesis::TFaceEntryEnfVertexListMap entryEnfVertexListMap = BLSURFPlugin_Hypothesis::GetAllEnforcedVerticesByFace(hyp);
1265 BLSURFPlugin_Hypothesis::TFaceEntryEnfVertexListMap::const_iterator enfIt = entryEnfVertexListMap.begin();
1266 for ( ; enfIt != entryEnfVertexListMap.end(); ++enfIt ) {
1267 if ( !enfIt->second.empty() ) {
1268 GeomShape = entryToShape(enfIt->first);
1269 GeomType = GeomShape.ShapeType();
1271 if (GeomType == TopAbs_COMPOUND){
1272 for (TopoDS_Iterator it (GeomShape); it.More(); it.Next()){
1273 if (it.Value().ShapeType() == TopAbs_FACE){
1274 HasSizeMapOnFace = true;
1275 createEnforcedVertexOnFace(it.Value(), enfIt->second);
1280 if (GeomType == TopAbs_FACE){
1281 HasSizeMapOnFace = true;
1282 createEnforcedVertexOnFace(GeomShape, enfIt->second);
1287 // Internal vertices
1288 bool useInternalVertexAllFaces = BLSURFPlugin_Hypothesis::GetInternalEnforcedVertexAllFaces(hyp);
1289 if (useInternalVertexAllFaces) {
1290 std::string grpName = BLSURFPlugin_Hypothesis::GetInternalEnforcedVertexAllFacesGroup(hyp);
1291 MESSAGE("Setting Internal Enforced Vertices");
1293 TopExp_Explorer exp (theGeomShape, TopAbs_FACE);
1294 for (; exp.More(); exp.Next()){
1295 MESSAGE("Iterating shapes. Shape type is " << exp.Current().ShapeType());
1296 TopExp_Explorer exp_face (exp.Current(), TopAbs_VERTEX, TopAbs_EDGE);
1297 for (; exp_face.More(); exp_face.Next())
1299 // Get coords of vertex
1300 // Check if current coords is already in enfVertexList
1301 // If coords not in enfVertexList, add new enfVertex
1302 aPnt = BRep_Tool::Pnt(TopoDS::Vertex(exp_face.Current()));
1303 MESSAGE("Found vertex on face at " << aPnt.X() <<", "<<aPnt.Y()<<", "<<aPnt.Z());
1304 BLSURFPlugin_Hypothesis::TEnfVertex* enfVertex = new BLSURFPlugin_Hypothesis::TEnfVertex();
1305 enfVertex->coords.push_back(aPnt.X());
1306 enfVertex->coords.push_back(aPnt.Y());
1307 enfVertex->coords.push_back(aPnt.Z());
1308 enfVertex->name = "";
1309 enfVertex->faceEntries.clear();
1310 enfVertex->geomEntry = "";
1311 enfVertex->grpName = grpName;
1312 enfVertex->vertex = TopoDS::Vertex( exp_face.Current() );
1313 _createEnforcedVertexOnFace( TopoDS::Face(exp.Current()), aPnt, enfVertex);
1314 HasSizeMapOnFace = true;
1319 MESSAGE("Setting Size Map on FACES ");
1320 cadsurf_set_sizemap_iso_cad_face(css, size_on_surface, &_smp_phy_size);
1322 if (HasSizeMapOnEdge){
1323 MESSAGE("Setting Size Map on EDGES ");
1324 cadsurf_set_sizemap_iso_cad_edge(css, size_on_edge, &_smp_phy_size);
1326 if (HasSizeMapOnVertex){
1327 MESSAGE("Setting Size Map on VERTICES ");
1328 cadsurf_set_sizemap_iso_cad_point(css, size_on_vertex, &_smp_phy_size);
1335 _preCadFacesIDsPeriodicityVector.clear();
1336 _preCadEdgesIDsPeriodicityVector.clear();
1338 MESSAGE("SetParameters preCadFacesPeriodicityVector");
1339 const BLSURFPlugin_Hypothesis::TPreCadPeriodicityVector preCadFacesPeriodicityVector = BLSURFPlugin_Hypothesis::GetPreCadFacesPeriodicityVector(hyp);
1341 for (std::size_t i = 0; i<preCadFacesPeriodicityVector.size(); i++){
1342 MESSAGE("SetParameters preCadFacesPeriodicityVector[" << i << "]");
1343 createPreCadFacesPeriodicity(theGeomShape, preCadFacesPeriodicityVector[i]);
1345 MESSAGE("_preCadFacesIDsPeriodicityVector.size() = " << _preCadFacesIDsPeriodicityVector.size());
1347 MESSAGE("SetParameters preCadEdgesPeriodicityVector");
1348 const BLSURFPlugin_Hypothesis::TPreCadPeriodicityVector preCadEdgesPeriodicityVector = BLSURFPlugin_Hypothesis::GetPreCadEdgesPeriodicityVector(hyp);
1350 for (std::size_t i = 0; i<preCadEdgesPeriodicityVector.size(); i++){
1351 MESSAGE("SetParameters preCadEdgesPeriodicityVector[" << i << "]");
1352 createPreCadEdgesPeriodicity(theGeomShape, preCadEdgesPeriodicityVector[i]);
1354 MESSAGE("_preCadEdgesIDsPeriodicityVector.size() = " << _preCadEdgesIDsPeriodicityVector.size());
1358 //================================================================================
1360 * \brief Throws an exception if a parameter name is wrong
1362 //================================================================================
1364 void BLSURFPlugin_BLSURF::set_param(cadsurf_session_t *css,
1365 const char * option_name,
1366 const char * option_value)
1368 status_t status = cadsurf_set_param(css, option_name, option_value );
1370 if ( _hypothesis && _hypothesis->GetVerbosity() > _hypothesis->GetDefaultVerbosity() )
1371 cout << option_name << " = " << option_value << endl;
1373 if ( status != MESHGEMS_STATUS_OK )
1375 if ( status == MESHGEMS_STATUS_UNKNOWN_PARAMETER ) {
1376 throw SALOME_Exception
1377 ( SMESH_Comment("Invalid name of CADSURF parameter: ") << option_name );
1379 else if ( status == MESHGEMS_STATUS_NOLICENSE )
1380 throw SALOME_Exception
1381 ( "No valid license available" );
1383 throw SALOME_Exception
1384 ( SMESH_Comment("Either wrong name or unacceptable value of CADSURF parameter '")
1385 << option_name << "': " << option_value);
1391 // --------------------------------------------------------------------------
1393 * \brief Class correctly terminating usage of MG-CADSurf library at destruction
1395 class BLSURF_Cleaner
1398 cadsurf_session_t* _css;
1402 BLSURF_Cleaner(context_t * ctx,
1403 cadsurf_session_t* css,
1414 Clean( /*exceptContext=*/false );
1416 void Clean(const bool exceptContext)
1420 cadsurf_session_delete(_css); _css = 0;
1422 // #if BLSURF_VERSION_LONG >= "3.1.1"
1423 // // if(geo_sizemap_e)
1424 // // distene_sizemap_delete(geo_sizemap_e);
1425 // // if(geo_sizemap_f)
1426 // // distene_sizemap_delete(geo_sizemap_f);
1427 // if(iso_sizemap_p)
1428 // distene_sizemap_delete(iso_sizemap_p);
1429 // if(iso_sizemap_e)
1430 // distene_sizemap_delete(iso_sizemap_e);
1431 // if(iso_sizemap_f)
1432 // distene_sizemap_delete(iso_sizemap_f);
1434 // // if(clean_geo_sizemap_e)
1435 // // distene_sizemap_delete(clean_geo_sizemap_e);
1436 // // if(clean_geo_sizemap_f)
1437 // // distene_sizemap_delete(clean_geo_sizemap_f);
1438 // if(clean_iso_sizemap_p)
1439 // distene_sizemap_delete(clean_iso_sizemap_p);
1440 // if(clean_iso_sizemap_e)
1441 // distene_sizemap_delete(clean_iso_sizemap_e);
1442 // if(clean_iso_sizemap_f)
1443 // distene_sizemap_delete(clean_iso_sizemap_f);
1446 cad_delete(_cad); _cad = 0;
1447 dcad_delete(_dcad); _dcad = 0;
1448 if ( !exceptContext )
1450 context_delete(_ctx); _ctx = 0;
1456 // --------------------------------------------------------------------------
1457 // comparator to sort nodes and sub-meshes
1458 struct ShapeTypeCompare
1460 // sort nodes by position in the following order:
1461 // SMDS_TOP_FACE=2, SMDS_TOP_EDGE=1, SMDS_TOP_VERTEX=0, SMDS_TOP_3DSPACE=3
1462 bool operator()( const SMDS_MeshNode* n1, const SMDS_MeshNode* n2 ) const
1464 // NEW ORDER: nodes earlier added to sub-mesh are considered "less"
1465 return n1->getIdInShape() < n2->getIdInShape();
1466 // SMDS_TypeOfPosition pos1 = n1->GetPosition()->GetTypeOfPosition();
1467 // SMDS_TypeOfPosition pos2 = n2->GetPosition()->GetTypeOfPosition();
1468 // if ( pos1 == pos2 ) return 0;
1469 // if ( pos1 < pos2 || pos1 == SMDS_TOP_3DSPACE ) return 1;
1472 // sort sub-meshes in order: EDGE, VERTEX
1473 bool operator()( const SMESHDS_SubMesh* s1, const SMESHDS_SubMesh* s2 ) const
1475 int isVertex1 = ( s1 && s1->NbElements() == 0 );
1476 int isVertex2 = ( s2 && s2->NbElements() == 0 );
1477 if ( isVertex1 == isVertex2 )
1479 return isVertex1 < isVertex2;
1483 //================================================================================
1485 * \brief Fills groups of nodes to be merged
1487 //================================================================================
1489 void getNodeGroupsToMerge( const SMESHDS_SubMesh* smDS,
1490 const TopoDS_Shape& shape,
1491 SMESH_MeshEditor::TListOfListOfNodes& nodeGroupsToMerge)
1493 SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
1494 switch ( shape.ShapeType() )
1496 case TopAbs_VERTEX: {
1497 std::list< const SMDS_MeshNode* > nodes;
1498 while ( nIt->more() )
1499 nodes.push_back( nIt->next() );
1500 if ( nodes.size() > 1 )
1501 nodeGroupsToMerge.push_back( nodes );
1505 std::multimap< double, const SMDS_MeshNode* > u2node;
1506 const SMDS_EdgePosition* ePos;
1507 while ( nIt->more() )
1509 const SMDS_MeshNode* n = nIt->next();
1510 if (( ePos = dynamic_cast< const SMDS_EdgePosition* >( n->GetPosition() )))
1511 u2node.insert( make_pair( ePos->GetUParameter(), n ));
1513 if ( u2node.size() < 2 ) return;
1515 //double tol = (( u2node.rbegin()->first - u2node.begin()->first ) / 20.) / u2node.size();
1517 BRep_Tool::Range( TopoDS::Edge( shape ), f,l );
1518 double tol = (( l - f ) / 20.) / u2node.size();
1520 std::multimap< double, const SMDS_MeshNode* >::iterator un2, un1;
1521 for ( un2 = u2node.begin(), un1 = un2++; un2 != u2node.end(); un1 = un2++ )
1523 if (( un2->first - un1->first ) <= tol )
1525 std::list< const SMDS_MeshNode* > nodes;
1526 nodes.push_back( un1->second );
1527 while (( un2->first - un1->first ) <= tol )
1529 nodes.push_back( un2->second );
1530 if ( ++un2 == u2node.end()) {
1535 // make nodes created on the boundary of viscous layer replace nodes created
1536 // by MG-CADSurf as their SMDS_Position is more correct
1537 nodes.sort( ShapeTypeCompare() );
1538 nodeGroupsToMerge.push_back( nodes );
1545 // SMESH_MeshEditor::TListOfListOfNodes::const_iterator nll = nodeGroupsToMerge.begin();
1546 // for ( ; nll != nodeGroupsToMerge.end(); ++nll )
1548 // cout << "Merge ";
1549 // const std::list< const SMDS_MeshNode* >& nl = *nll;
1550 // std::list< const SMDS_MeshNode* >::const_iterator nIt = nl.begin();
1551 // for ( ; nIt != nl.end(); ++nIt )
1552 // cout << (*nIt) << " ";
1558 //================================================================================
1560 * \brief A temporary mesh used to compute mesh on a proxy FACE
1562 //================================================================================
1564 struct TmpMesh: public SMESH_Mesh
1566 typedef std::map<const SMDS_MeshNode*, const SMDS_MeshNode*, TIDCompare > TN2NMap;
1567 TN2NMap _tmp2origNN;
1568 TopoDS_Face _proxyFace;
1572 _myMeshDS = new SMESHDS_Mesh( _id, true );
1574 //--------------------------------------------------------------------------------
1576 * \brief Creates a FACE bound by viscous layers and mesh each its EDGE with 1 segment
1578 //--------------------------------------------------------------------------------
1580 const TopoDS_Face& makeProxyFace( SMESH_ProxyMesh::Ptr& viscousMesh,
1581 const TopoDS_Face& origFace)
1583 // get data of nodes on inner boundary of viscous layers
1584 SMESH_Mesh* origMesh = viscousMesh->GetMesh();
1586 TSideVector wireVec = StdMeshers_FaceSide::GetFaceWires(origFace, *origMesh,
1587 /*skipMediumNodes = */true,
1589 if ( err && err->IsKO() )
1590 throw *err.get(); // it should be caught at SMESH_subMesh
1592 // proxy nodes and corresponding tmp VERTEXes
1593 std::vector<const SMDS_MeshNode*> origNodes;
1594 std::vector<TopoDS_Vertex> tmpVertex;
1596 // create a proxy FACE
1597 TopoDS_Shape origFaceCopy = origFace.EmptyCopied();
1598 BRepBuilderAPI_MakeFace newFace( TopoDS::Face( origFaceCopy ));
1599 for ( size_t iW = 0; iW != wireVec.size(); ++iW )
1601 StdMeshers_FaceSidePtr& wireData = wireVec[iW];
1602 const UVPtStructVec& wirePoints = wireData->GetUVPtStruct();
1603 if ( wirePoints.size() < 3 )
1606 BRepBuilderAPI_MakePolygon wire;
1607 const size_t i0 = tmpVertex.size();
1608 for ( size_t iN = 0; iN < wirePoints.size(); ++iN )
1610 wire.Add( SMESH_TNodeXYZ( wirePoints[ iN ].node ));
1611 origNodes.push_back( wirePoints[ iN ].node );
1612 tmpVertex.push_back( wire.LastVertex() );
1614 tmpVertex[ i0 ] = wire.FirstVertex(); // wire.LastVertex()==NULL for 1 vertex in wire
1616 if ( !wire.IsDone() )
1617 throw SALOME_Exception("BLSURFPlugin_BLSURF: BRepBuilderAPI_MakePolygon failed");
1618 newFace.Add( wire );
1620 _proxyFace = newFace;
1622 // set a new shape to mesh
1623 TopoDS_Compound auxCompoundToMesh;
1624 BRep_Builder shapeBuilder;
1625 shapeBuilder.MakeCompound( auxCompoundToMesh );
1626 shapeBuilder.Add( auxCompoundToMesh, _proxyFace );
1627 shapeBuilder.Add( auxCompoundToMesh, origMesh->GetShapeToMesh() );
1629 ShapeToMesh( auxCompoundToMesh );
1631 //TopExp_Explorer fExp( auxCompoundToMesh, TopAbs_FACE );
1632 //_proxyFace = TopoDS::Face( fExp.Current() );
1635 // Make input mesh for MG-CADSurf: segments on EDGE's of newFace
1637 // make nodes and fill in _tmp2origNN
1639 SMESHDS_Mesh* tmpMeshDS = GetMeshDS();
1640 for ( size_t i = 0; i < origNodes.size(); ++i )
1642 GetSubMesh( tmpVertex[i] )->ComputeStateEngine( SMESH_subMesh::COMPUTE );
1643 if ( const SMDS_MeshNode* tmpN = SMESH_Algo::VertexNode( tmpVertex[i], tmpMeshDS ))
1644 _tmp2origNN.insert( _tmp2origNN.end(), make_pair( tmpN, origNodes[i] ));
1646 throw SALOME_Exception("BLSURFPlugin_BLSURF: a proxy vertex not meshed");
1650 TopoDS_Vertex v1, v2;
1651 for ( TopExp_Explorer edge( _proxyFace, TopAbs_EDGE ); edge.More(); edge.Next() )
1653 const TopoDS_Edge& E = TopoDS::Edge( edge.Current() );
1654 TopExp::Vertices( E, v1, v2 );
1655 const SMDS_MeshNode* n1 = SMESH_Algo::VertexNode( v1, tmpMeshDS );
1656 const SMDS_MeshNode* n2 = SMESH_Algo::VertexNode( v2, tmpMeshDS );
1658 if ( SMDS_MeshElement* seg = tmpMeshDS->AddEdge( n1, n2 ))
1659 tmpMeshDS->SetMeshElementOnShape( seg, E );
1665 //--------------------------------------------------------------------------------
1667 * \brief Fill in the origMesh with faces computed by MG-CADSurf in this tmp mesh
1669 //--------------------------------------------------------------------------------
1671 void FillInOrigMesh( SMESH_Mesh& origMesh,
1672 const TopoDS_Face& origFace )
1674 SMESH_MesherHelper helper( origMesh );
1675 helper.SetSubShape( origFace );
1676 helper.SetElementsOnShape( true );
1678 SMESH_MesherHelper tmpHelper( *this );
1679 tmpHelper.SetSubShape( _proxyFace );
1681 // iterate over tmp faces and copy them in origMesh
1682 const SMDS_MeshNode* nodes[27];
1683 const SMDS_MeshNode* nullNode = 0;
1685 SMDS_FaceIteratorPtr fIt = GetMeshDS()->facesIterator(/*idInceasingOrder=*/true);
1686 while ( fIt->more() )
1688 const SMDS_MeshElement* f = fIt->next();
1689 SMDS_ElemIteratorPtr nIt = f->nodesIterator();
1691 for ( ; nIt->more(); ++nbN )
1693 const SMDS_MeshNode* n = static_cast<const SMDS_MeshNode*>( nIt->next() );
1694 TN2NMap::iterator n2nIt =
1695 _tmp2origNN.insert( _tmp2origNN.end(), make_pair( n, nullNode ));
1696 if ( !n2nIt->second ) {
1698 gp_XY uv = tmpHelper.GetNodeUV( _proxyFace, n );
1699 n2nIt->second = helper.AddNode( xyz[0], xyz[1], xyz[2], uv.X(), uv.Y() );
1701 nodes[ nbN ] = n2nIt->second;
1704 case 3: helper.AddFace( nodes[0], nodes[1], nodes[2] ); break;
1705 // case 6: helper.AddFace( nodes[0], nodes[1], nodes[2],
1706 // nodes[3], nodes[4], nodes[5]); break;
1707 case 4: helper.AddFace( nodes[0], nodes[1], nodes[2], nodes[3] ); break;
1708 // case 9: helper.AddFace( nodes[0], nodes[1], nodes[2], nodes[3],
1709 // nodes[4], nodes[5], nodes[6], nodes[7], nodes[8]); break;
1710 // case 8: helper.AddFace( nodes[0], nodes[1], nodes[2], nodes[3],
1711 // nodes[4], nodes[5], nodes[6], nodes[7]); break;
1718 * \brief A structure holding an error description and a verbisity level
1720 struct message_cb_user_data
1722 std::string * _error;
1729 status_t curv_fun(real t, real *uv, real *dt, real *dtt, void *user_data);
1730 status_t surf_fun(real *uv, real *xyz, real*du, real *dv,
1731 real *duu, real *duv, real *dvv, void *user_data);
1732 status_t message_cb(message_t *msg, void *user_data);
1733 status_t interrupt_cb(integer *interrupt_status, void *user_data);
1735 //=============================================================================
1739 //=============================================================================
1741 bool BLSURFPlugin_BLSURF::Compute(SMESH_Mesh& aMesh, const TopoDS_Shape& aShape) {
1743 MESSAGE("BLSURFPlugin_BLSURF::Compute");
1745 // Fix problem with locales
1746 Kernel_Utils::Localizer aLocalizer;
1748 this->SMESH_Algo::_progress = 1e-3; // prevent progress advancment while computing attractors
1750 bool viscousLayersMade =
1751 ( aShape.ShapeType() == TopAbs_FACE &&
1752 StdMeshers_ViscousLayers2D::HasProxyMesh( TopoDS::Face( aShape ), aMesh ));
1754 if ( !viscousLayersMade )
1755 if ( !compute( aMesh, aShape, /*allowSubMeshClearing=*/true ))
1758 if ( _haveViscousLayers || viscousLayersMade )
1760 // Compute viscous layers
1762 TopTools_MapOfShape map;
1763 for (TopExp_Explorer face_iter(aShape,TopAbs_FACE);face_iter.More();face_iter.Next())
1765 const TopoDS_Face& F = TopoDS::Face(face_iter.Current());
1766 if ( !map.Add( F )) continue;
1767 SMESH_ProxyMesh::Ptr viscousMesh = StdMeshers_ViscousLayers2D::Compute( aMesh, F );
1769 return false; // error in StdMeshers_ViscousLayers2D::Compute()
1771 // Compute MG-CADSurf mesh on viscous layers
1773 if ( viscousMesh->NbProxySubMeshes() > 0 )
1776 const TopoDS_Face& proxyFace = tmpMesh.makeProxyFace( viscousMesh, F );
1777 if ( !compute( tmpMesh, proxyFace, /*allowSubMeshClearing=*/false ))
1779 tmpMesh.FillInOrigMesh( aMesh, F );
1783 // Re-compute MG-CADSurf mesh on the rest faces if the mesh was cleared
1785 for (TopExp_Explorer face_iter(aShape,TopAbs_FACE);face_iter.More();face_iter.Next())
1787 const TopoDS_Face& F = TopoDS::Face(face_iter.Current());
1788 SMESH_subMesh* fSM = aMesh.GetSubMesh( F );
1789 if ( fSM->IsMeshComputed() ) continue;
1791 if ( !compute( aMesh, aShape, /*allowSubMeshClearing=*/true ))
1799 //=============================================================================
1803 //=============================================================================
1805 bool BLSURFPlugin_BLSURF::compute(SMESH_Mesh& aMesh,
1806 const TopoDS_Shape& aShape,
1807 bool allowSubMeshClearing)
1809 /* create a distene context (generic object) */
1810 status_t status = STATUS_ERROR;
1813 SMESHDS_Mesh* meshDS = aMesh.GetMeshDS();
1814 SMESH_MesherHelper helper( aMesh );
1815 // do not call helper.IsQuadraticSubMesh() because sub-meshes
1816 // may be cleaned and helper.myTLinkNodeMap gets invalid in such a case
1817 bool haveQuadraticSubMesh = SMESH_MesherHelper( aMesh ).IsQuadraticSubMesh( aShape );
1818 bool quadraticSubMeshAndViscousLayer = false;
1819 bool needMerge = false;
1820 typedef set< SMESHDS_SubMesh*, ShapeTypeCompare > TSubMeshSet;
1821 TSubMeshSet edgeSubmeshes;
1822 TSubMeshSet& mergeSubmeshes = edgeSubmeshes;
1824 TopTools_IndexedMapOfShape pmap, emap, fmap;
1826 // Issue 0019864. On DebianSarge, FE signals do not obey to OSD::SetSignal(false)
1828 feclearexcept( FE_ALL_EXCEPT );
1829 int oldFEFlags = fedisableexcept( FE_ALL_EXCEPT );
1832 context_t *ctx = context_new();
1834 /* Set the message callback in the working context */
1835 message_cb_user_data mcud;
1836 mcud._error = & this->SMESH_Algo::_comment;
1837 mcud._progress = & this->SMESH_Algo::_progress;
1839 _hypothesis ? _hypothesis->GetVerbosity() : BLSURFPlugin_Hypothesis::GetDefaultVerbosity();
1840 context_set_message_callback(ctx, message_cb, &mcud);
1842 /* set the interruption callback */
1843 _compute_canceled = false;
1844 context_set_interrupt_callback(ctx, interrupt_cb, this);
1846 /* create the CAD object we will work on. It is associated to the context ctx. */
1847 cad_t *c = cad_new(ctx);
1848 dcad_t *dcad = dcad_new(c);
1850 FacesWithSizeMap.Clear();
1851 FaceId2SizeMap.clear();
1852 FaceId2ClassAttractor.clear();
1853 FaceIndex2ClassAttractor.clear();
1854 EdgesWithSizeMap.Clear();
1855 EdgeId2SizeMap.clear();
1856 VerticesWithSizeMap.Clear();
1857 VertexId2SizeMap.clear();
1859 /* Now fill the CAD object with data from your CAD
1860 * environement. This is the most complex part of a successfull
1866 cadsurf_session_t *css = cadsurf_session_new(ctx);
1868 // an object that correctly deletes all cadsurf objects at destruction
1869 BLSURF_Cleaner cleaner( ctx,css,c,dcad );
1871 MESSAGE("BEGIN SetParameters");
1872 SetParameters(_hypothesis, css, aShape);
1873 MESSAGE("END SetParameters");
1875 MESSAGE("_preCadFacesIDsPeriodicityVector.size() = " << _preCadFacesIDsPeriodicityVector.size());
1877 haveQuadraticSubMesh = haveQuadraticSubMesh || (_hypothesis != NULL && _hypothesis->GetQuadraticMesh());
1878 helper.SetIsQuadratic( haveQuadraticSubMesh );
1880 // To remove as soon as quadratic mesh is allowed - BEGIN
1881 // GDD: Viscous layer is not allowed with quadratic mesh
1882 if (_haveViscousLayers && haveQuadraticSubMesh ) {
1883 quadraticSubMeshAndViscousLayer = true;
1884 _haveViscousLayers = !haveQuadraticSubMesh;
1885 _comment += "Warning: Viscous layer is not possible with a quadratic mesh, it is ignored.";
1886 error(COMPERR_WARNING, _comment);
1888 // To remove as soon as quadratic mesh is allowed - END
1890 // needed to prevent the opencascade memory managmement from freeing things
1891 vector<Handle(Geom2d_Curve)> curves;
1892 vector<Handle(Geom_Surface)> surfaces;
1896 FaceId2PythonSmp.clear();
1897 EdgeId2PythonSmp.clear();
1898 VertexId2PythonSmp.clear();
1900 /****************************************************************************************
1902 *****************************************************************************************/
1904 string bad_end = "return";
1906 TopTools_IndexedMapOfShape _map;
1907 TopExp::MapShapes(aShape,TopAbs_VERTEX,_map);
1908 int ienf = _map.Extent();
1910 assert(Py_IsInitialized());
1911 PyGILState_STATE gstate;
1913 string theSizeMapStr;
1915 for (TopExp_Explorer face_iter(aShape,TopAbs_FACE);face_iter.More();face_iter.Next())
1917 TopoDS_Face f = TopoDS::Face(face_iter.Current());
1919 SMESH_subMesh* fSM = aMesh.GetSubMesh( f );
1920 if ( !fSM->IsEmpty() ) continue; // skip already meshed FACE with viscous layers
1922 // make INTERNAL face oriented FORWARD (issue 0020993)
1923 if (f.Orientation() != TopAbs_FORWARD && f.Orientation() != TopAbs_REVERSED )
1924 f.Orientation(TopAbs_FORWARD);
1926 iface = fmap.Add(f);
1927 // std::string aFileName = "fmap_face_";
1928 // aFileName.append(val_to_string(iface));
1929 // aFileName.append(".brep");
1930 // BRepTools::Write(f,aFileName.c_str());
1932 surfaces.push_back(BRep_Tool::Surface(f));
1934 /* create an object representing the face for cadsurf */
1935 /* where face_id is an integer identifying the face.
1936 * surf_function is the function that defines the surface
1937 * (For this face, it will be called by cadsurf with your_face_object_ptr
1938 * as last parameter.
1940 #if OCC_VERSION_MAJOR < 7
1941 cad_face_t *fce = cad_face_new(c, iface, surf_fun, surfaces.back());
1943 cad_face_t *fce = cad_face_new(c, iface, surf_fun, surfaces.back().get());
1946 /* by default a face has no tag (color).
1947 The following call sets it to the same value as the Geom module ID : */
1948 const int faceTag = meshDS->ShapeToIndex(f);
1949 cad_face_set_tag(fce, faceTag);
1951 /* Set face orientation (optional if you want a well oriented output mesh)*/
1952 if(f.Orientation() != TopAbs_FORWARD)
1953 cad_face_set_orientation(fce, CAD_ORIENTATION_REVERSED);
1955 cad_face_set_orientation(fce, CAD_ORIENTATION_FORWARD);
1957 if (HasSizeMapOnFace /*&& !use_precad*/) //22903: use_precad seems not to interfere
1959 // -----------------
1961 // -----------------
1962 faceKey = FacesWithSizeMap.FindIndex(f);
1965 if (FaceId2SizeMap.find(faceKey)!=FaceId2SizeMap.end()) {
1966 MESSAGE("A size map is defined on face :"<<faceKey);
1967 theSizeMapStr = FaceId2SizeMap[faceKey];
1968 // check if function ends with "return"
1969 if (theSizeMapStr.find(bad_end) == (theSizeMapStr.size()-bad_end.size()-1))
1971 // Expr To Python function, verification is performed at validation in GUI
1972 gstate = PyGILState_Ensure();
1973 PyObject * obj = NULL;
1974 obj= PyRun_String(theSizeMapStr.c_str(), Py_file_input, main_dict, NULL);
1976 PyObject * func = NULL;
1977 func = PyObject_GetAttrString(main_mod, "f");
1978 FaceId2PythonSmp[iface]=func;
1979 FaceId2SizeMap.erase(faceKey);
1980 PyGILState_Release(gstate);
1983 // Specific size map = Attractor
1984 std::map<int,std::vector<double> >::iterator attractor_iter = FaceId2AttractorCoords.begin();
1986 for (; attractor_iter != FaceId2AttractorCoords.end(); ++attractor_iter) {
1987 if (attractor_iter->first == faceKey) {
1988 MESSAGE("Face indice: " << iface);
1989 MESSAGE("Adding attractor");
1991 double xyzCoords[3] = {attractor_iter->second[2],
1992 attractor_iter->second[3],
1993 attractor_iter->second[4]};
1995 MESSAGE("Check position of vertex =(" << xyzCoords[0] << "," << xyzCoords[1] << "," << xyzCoords[2] << ")");
1996 gp_Pnt P(xyzCoords[0],xyzCoords[1],xyzCoords[2]);
1997 BRepClass_FaceClassifier scl(f,P,1e-7);
1998 // OCC 6.3sp6 : scl.Perform() is bugged. The function was rewritten
1999 // BRepClass_FaceClassifierPerform(&scl,f,P,1e-7);
2000 // OCC 6.5.2: scl.Perform() is not bugged anymore
2001 scl.Perform(f, P, 1e-7);
2002 TopAbs_State result = scl.State();
2003 MESSAGE("Position of point on face: "<<result);
2004 if ( result == TopAbs_OUT )
2005 MESSAGE("Point is out of face: node is not created");
2006 if ( result == TopAbs_UNKNOWN )
2007 MESSAGE("Point position on face is unknown: node is not created");
2008 if ( result == TopAbs_ON )
2009 MESSAGE("Point is on border of face: node is not created");
2010 if ( result == TopAbs_IN )
2012 // Point is inside face and not on border
2013 MESSAGE("Point is in face: node is created");
2014 double uvCoords[2] = {attractor_iter->second[0],attractor_iter->second[1]};
2016 MESSAGE("Add cad point on (u,v)=(" << uvCoords[0] << "," << uvCoords[1] << ") with id = " << ienf);
2017 cad_point_t* point_p = cad_point_new(fce, ienf, uvCoords);
2018 cad_point_set_tag(point_p, ienf);
2020 FaceId2AttractorCoords.erase(faceKey);
2024 // -----------------
2026 // -----------------
2027 TId2ClsAttractorVec::iterator clAttractor_iter = FaceId2ClassAttractor.find(faceKey);
2028 if (clAttractor_iter != FaceId2ClassAttractor.end()){
2029 MESSAGE("Face indice: " << iface);
2030 MESSAGE("Adding attractor");
2031 std::vector< BLSURFPlugin_Attractor* > & attVec = clAttractor_iter->second;
2032 for ( size_t i = 0; i < attVec.size(); ++i )
2033 if ( !attVec[i]->IsMapBuilt() ) {
2034 std::cout<<"Compute " << theNbAttractors-- << "-th attractor" <<std::endl;
2035 attVec[i]->BuildMap();
2037 FaceIndex2ClassAttractor[iface].swap( attVec );
2038 FaceId2ClassAttractor.erase(clAttractor_iter);
2040 } // if (HasSizeMapOnFace && !use_precad)
2042 // ------------------
2043 // Enforced Vertices
2044 // ------------------
2045 faceKey = FacesWithEnforcedVertices.FindIndex(f);
2046 std::map<int,BLSURFPlugin_Hypothesis::TEnfVertexCoordsList >::const_iterator evmIt = FaceId2EnforcedVertexCoords.find(faceKey);
2047 if (evmIt != FaceId2EnforcedVertexCoords.end()) {
2048 MESSAGE("Some enforced vertices are defined");
2049 BLSURFPlugin_Hypothesis::TEnfVertexCoordsList evl;
2050 MESSAGE("Face indice: " << iface);
2051 MESSAGE("Adding enforced vertices");
2052 evl = evmIt->second;
2053 MESSAGE("Number of vertices to add: "<< evl.size());
2054 BLSURFPlugin_Hypothesis::TEnfVertexCoordsList::const_iterator evlIt = evl.begin();
2055 for (; evlIt != evl.end(); ++evlIt) {
2056 BLSURFPlugin_Hypothesis::TEnfVertexCoords xyzCoords;
2057 xyzCoords.push_back(evlIt->at(2));
2058 xyzCoords.push_back(evlIt->at(3));
2059 xyzCoords.push_back(evlIt->at(4));
2060 MESSAGE("Check position of vertex =(" << xyzCoords[0] << "," << xyzCoords[1] << "," << xyzCoords[2] << ")");
2061 gp_Pnt P(xyzCoords[0],xyzCoords[1],xyzCoords[2]);
2062 BRepClass_FaceClassifier scl(f,P,1e-7);
2063 // OCC 6.3sp6 : scl.Perform() is bugged. The function was rewritten
2064 // BRepClass_FaceClassifierPerform(&scl,f,P,1e-7);
2065 // OCC 6.5.2: scl.Perform() is not bugged anymore
2066 scl.Perform(f, P, 1e-7);
2067 TopAbs_State result = scl.State();
2068 MESSAGE("Position of point on face: "<<result);
2069 if ( result == TopAbs_OUT ) {
2070 MESSAGE("Point is out of face: node is not created");
2071 if (EnfVertexCoords2ProjVertex.find(xyzCoords) != EnfVertexCoords2ProjVertex.end()) {
2072 EnfVertexCoords2ProjVertex.erase(xyzCoords);
2073 // isssue 22783. Do not erase as this point can be IN other face of a group
2074 //EnfVertexCoords2EnfVertexList.erase(xyzCoords);
2077 if ( result == TopAbs_UNKNOWN ) {
2078 MESSAGE("Point position on face is unknown: node is not created");
2079 if (EnfVertexCoords2ProjVertex.find(xyzCoords) != EnfVertexCoords2ProjVertex.end()) {
2080 EnfVertexCoords2ProjVertex.erase(xyzCoords);
2081 //EnfVertexCoords2EnfVertexList.erase(xyzCoords);
2084 if ( result == TopAbs_ON ) {
2085 MESSAGE("Point is on border of face: node is not created");
2086 if (EnfVertexCoords2ProjVertex.find(xyzCoords) != EnfVertexCoords2ProjVertex.end()) {
2087 EnfVertexCoords2ProjVertex.erase(xyzCoords);
2088 //EnfVertexCoords2EnfVertexList.erase(xyzCoords);
2091 if ( result == TopAbs_IN )
2093 // Point is inside face and not on border
2094 MESSAGE("Point is in face: node is created");
2095 double uvCoords[2] = {evlIt->at(0),evlIt->at(1)};
2097 MESSAGE("Add cad point on (u,v)=(" << uvCoords[0] << "," << uvCoords[1] << ") with id = " << ienf);
2098 cad_point_t* point_p = cad_point_new(fce, ienf, uvCoords);
2100 std::map< BLSURFPlugin_Hypothesis::TEnfVertexCoords, BLSURFPlugin_Hypothesis::TEnfVertexList >::const_iterator enfCoordsIt = EnfVertexCoords2EnfVertexList.find(xyzCoords);
2101 if (enfCoordsIt != EnfVertexCoords2EnfVertexList.end() &&
2102 !enfCoordsIt->second.empty() )
2104 // to merge nodes of an INTERNAL vertex belonging to several faces
2105 TopoDS_Vertex v = (*enfCoordsIt->second.begin())->vertex;
2106 if ( v.IsNull() ) v = (*enfCoordsIt->second.rbegin())->vertex;
2107 if ( !v.IsNull() ) {
2108 tag = pmap.Add( v );
2109 SMESH_subMesh* vSM = aMesh.GetSubMesh( v );
2110 vSM->ComputeStateEngine( SMESH_subMesh::COMPUTE );
2111 mergeSubmeshes.insert( vSM->GetSubMeshDS() );
2112 // //if ( tag != pmap.Extent() )
2113 // needMerge = true;
2116 if ( tag == 0 ) tag = ienf;
2117 cad_point_set_tag(point_p, tag);
2120 FaceId2EnforcedVertexCoords.erase(faceKey);
2124 /****************************************************************************************
2126 now create the edges associated to this face
2127 *****************************************************************************************/
2129 for (TopExp_Explorer edge_iter(f,TopAbs_EDGE);edge_iter.More();edge_iter.Next())
2131 TopoDS_Edge e = TopoDS::Edge(edge_iter.Current());
2132 int ic = emap.FindIndex(e);
2136 // std::string aFileName = "fmap_edge_";
2137 // aFileName.append(val_to_string(ic));
2138 // aFileName.append(".brep");
2139 // BRepTools::Write(e,aFileName.c_str());
2142 curves.push_back(BRep_Tool::CurveOnSurface(e, f, tmin, tmax));
2144 if (HasSizeMapOnEdge){
2145 edgeKey = EdgesWithSizeMap.FindIndex(e);
2146 if (EdgeId2SizeMap.find(edgeKey)!=EdgeId2SizeMap.end()) {
2147 MESSAGE("Sizemap defined on edge with index " << edgeKey);
2148 theSizeMapStr = EdgeId2SizeMap[edgeKey];
2149 if (theSizeMapStr.find(bad_end) == (theSizeMapStr.size()-bad_end.size()-1))
2151 // Expr To Python function, verification is performed at validation in GUI
2152 gstate = PyGILState_Ensure();
2153 PyObject * obj = NULL;
2154 obj= PyRun_String(theSizeMapStr.c_str(), Py_file_input, main_dict, NULL);
2156 PyObject * func = NULL;
2157 func = PyObject_GetAttrString(main_mod, "f");
2158 EdgeId2PythonSmp[ic]=func;
2159 EdgeId2SizeMap.erase(edgeKey);
2160 PyGILState_Release(gstate);
2163 /* data of nodes existing on the edge */
2164 StdMeshers_FaceSidePtr nodeData;
2165 SMESH_subMesh* sm = aMesh.GetSubMesh( e );
2166 if ( !sm->IsEmpty() )
2168 // SMESH_subMeshIteratorPtr subsmIt = sm->getDependsOnIterator( /*includeSelf=*/true,
2169 // /*complexFirst=*/false);
2170 // while ( subsmIt->more() )
2171 // edgeSubmeshes.insert( subsmIt->next()->GetSubMeshDS() );
2172 edgeSubmeshes.insert( sm->GetSubMeshDS() );
2174 nodeData.reset( new StdMeshers_FaceSide( f, e, &aMesh, /*isForwrd = */true,
2175 /*ignoreMedium=*/haveQuadraticSubMesh));
2176 if ( nodeData->MissVertexNode() )
2177 return error(COMPERR_BAD_INPUT_MESH,"No node on vertex");
2179 const std::vector<UVPtStruct>& nodeDataVec = nodeData->GetUVPtStruct();
2180 if ( !nodeDataVec.empty() )
2182 if ( Abs( nodeDataVec[0].param - tmin ) > Abs( nodeDataVec.back().param - tmin ))
2184 nodeData->Reverse();
2185 nodeData->GetUVPtStruct(); // nodeData recomputes nodeDataVec
2187 // tmin and tmax can change in case of viscous layer on an adjacent edge
2188 tmin = nodeDataVec.front().param;
2189 tmax = nodeDataVec.back().param;
2193 cout << "---------------- Invalid nodeData" << endl;
2198 /* attach the edge to the current cadsurf face */
2199 #if OCC_VERSION_MAJOR < 7
2200 cad_edge_t *edg = cad_edge_new(fce, ic, tmin, tmax, curv_fun, curves.back());
2202 cad_edge_t *edg = cad_edge_new(fce, ic, tmin, tmax, curv_fun, curves.back().get());
2205 /* by default an edge has no tag (color).
2206 The following call sets it to the same value as the edge_id : */
2207 cad_edge_set_tag(edg, ic);
2209 /* by default, an edge does not necessalry appear in the resulting mesh,
2210 unless the following property is set :
2212 cad_edge_set_property(edg, EDGE_PROPERTY_SOFT_REQUIRED);
2214 /* by default an edge is a boundary edge */
2215 if (e.Orientation() == TopAbs_INTERNAL)
2216 cad_edge_set_property(edg, EDGE_PROPERTY_INTERNAL);
2218 // pass existing nodes of sub-meshes to MG-CADSurf
2221 const std::vector<UVPtStruct>& nodeDataVec = nodeData->GetUVPtStruct();
2222 const int nbNodes = nodeDataVec.size();
2224 dcad_edge_discretization_t *dedge;
2225 dcad_get_edge_discretization(dcad, edg, &dedge);
2226 dcad_edge_discretization_set_vertex_count( dedge, nbNodes );
2228 // cout << endl << " EDGE " << ic << endl;
2229 // cout << "tmin = "<<tmin << ", tmax = "<< tmax << endl;
2230 for ( int iN = 0; iN < nbNodes; ++iN )
2232 const UVPtStruct& nData = nodeDataVec[ iN ];
2233 double t = nData.param;
2234 real uv[2] = { nData.u, nData.v };
2235 SMESH_TNodeXYZ nXYZ( nData.node );
2236 // cout << "\tt = " << t
2237 // << "\t uv = ( " << uv[0] << ","<< uv[1] << " ) "
2238 // << "\t u = " << nData.param
2239 // << "\t ID = " << nData.node->GetID() << endl;
2240 dcad_edge_discretization_set_vertex_coordinates( dedge, iN+1, t, uv, nXYZ._xyz );
2242 dcad_edge_discretization_set_property(dedge, DISTENE_DCAD_PROPERTY_REQUIRED);
2245 /****************************************************************************************
2247 *****************************************************************************************/
2251 gp_Pnt2d e0 = curves.back()->Value(tmin);
2252 gp_Pnt ee0 = surfaces.back()->Value(e0.X(), e0.Y());
2253 Standard_Real d1=0,d2=0;
2256 for (TopExp_Explorer ex_edge(e ,TopAbs_VERTEX); ex_edge.More(); ex_edge.Next()) {
2257 TopoDS_Vertex v = TopoDS::Vertex(ex_edge.Current());
2261 d1 = ee0.SquareDistance(BRep_Tool::Pnt(v));
2264 d2 = ee0.SquareDistance(BRep_Tool::Pnt(v));
2266 *ip = pmap.FindIndex(v);
2269 // SMESH_subMesh* sm = aMesh.GetSubMesh(v);
2270 // if ( sm->IsMeshComputed() )
2271 // edgeSubmeshes.insert( sm->GetSubMeshDS() );
2274 // std::string aFileName = "fmap_vertex_";
2275 // aFileName.append(val_to_string(*ip));
2276 // aFileName.append(".brep");
2277 // BRepTools::Write(v,aFileName.c_str());
2279 if (HasSizeMapOnVertex){
2280 vertexKey = VerticesWithSizeMap.FindIndex(v);
2281 if (VertexId2SizeMap.find(vertexKey)!=VertexId2SizeMap.end()){
2282 theSizeMapStr = VertexId2SizeMap[vertexKey];
2283 //MESSAGE("VertexId2SizeMap[faceKey]: " << VertexId2SizeMap[vertexKey]);
2284 if (theSizeMapStr.find(bad_end) == (theSizeMapStr.size()-bad_end.size()-1))
2286 // Expr To Python function, verification is performed at validation in GUI
2287 gstate = PyGILState_Ensure();
2288 PyObject * obj = NULL;
2289 obj= PyRun_String(theSizeMapStr.c_str(), Py_file_input, main_dict, NULL);
2291 PyObject * func = NULL;
2292 func = PyObject_GetAttrString(main_mod, "f");
2293 VertexId2PythonSmp[*ip]=func;
2294 VertexId2SizeMap.erase(vertexKey); // do not erase if using a vector
2295 PyGILState_Release(gstate);
2300 // should not happen
2301 MESSAGE("An edge does not have 2 extremities.");
2304 // This defines the curves extremity connectivity
2305 cad_edge_set_extremities(edg, ip1, ip2);
2306 /* set the tag (color) to the same value as the extremity id : */
2307 cad_edge_set_extremities_tag(edg, ip1, ip2);
2310 cad_edge_set_extremities(edg, ip2, ip1);
2311 cad_edge_set_extremities_tag(edg, ip2, ip1);
2317 // Clear mesh from already meshed edges if possible else
2318 // remember that merge is needed
2319 TSubMeshSet::iterator smIt = edgeSubmeshes.begin();
2320 for ( ; smIt != edgeSubmeshes.end(); ++smIt ) // loop on already meshed EDGEs
2322 SMESHDS_SubMesh* smDS = *smIt;
2323 if ( !smDS ) continue;
2324 SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
2327 const SMDS_MeshNode* n = nIt->next();
2328 if ( n->NbInverseElements( SMDSAbs_Face ) > 0 )
2330 needMerge = true; // to correctly sew with viscous mesh
2331 // add existing medium nodes to helper
2332 if ( aMesh.NbEdges( ORDER_QUADRATIC ) > 0 )
2334 SMDS_ElemIteratorPtr edgeIt = smDS->GetElements();
2335 while ( edgeIt->more() )
2336 helper.AddTLinks( static_cast<const SMDS_MeshEdge*>(edgeIt->next()));
2341 if ( allowSubMeshClearing )
2343 SMDS_ElemIteratorPtr eIt = smDS->GetElements();
2344 while ( eIt->more() ) meshDS->RemoveFreeElement( eIt->next(), 0 );
2345 SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
2346 while ( nIt->more() ) meshDS->RemoveFreeNode( nIt->next(), 0 );
2355 ///////////////////////
2357 ///////////////////////
2359 MESSAGE("BEFORE PERIODICITY");
2360 MESSAGE("_preCadFacesIDsPeriodicityVector.size() = " << _preCadFacesIDsPeriodicityVector.size());
2361 if (! _preCadFacesIDsPeriodicityVector.empty()) {
2362 MESSAGE("INTO PRECAD FACES PERIODICITY");
2363 for (std::size_t i=0; i < _preCadFacesIDsPeriodicityVector.size(); i++){
2364 std::vector<int> theFace1_ids = _preCadFacesIDsPeriodicityVector[i].shape1IDs;
2365 std::vector<int> theFace2_ids = _preCadFacesIDsPeriodicityVector[i].shape2IDs;
2366 int* theFace1_ids_c = &theFace1_ids[0];
2367 int* theFace2_ids_c = &theFace2_ids[0];
2368 std::ostringstream o;
2369 o << "_preCadFacesIDsPeriodicityVector[" << i << "] = [";
2370 for (std::size_t j=0; j < theFace1_ids.size(); j++)
2371 o << theFace1_ids[j] << ", ";
2373 for (std::size_t j=0; j < theFace2_ids.size(); j++)
2374 o << theFace2_ids[j] << ", ";
2377 MESSAGE("theFace1_ids.size(): " << theFace1_ids.size());
2378 MESSAGE("theFace2_ids.size(): " << theFace2_ids.size());
2379 if (_preCadFacesIDsPeriodicityVector[i].theSourceVerticesCoords.empty())
2381 // If no source points, call peridoicity without transformation function
2382 MESSAGE("periodicity without transformation function");
2383 meshgems_cad_periodicity_transformation_t periodicity_transformation = NULL;
2384 status = cad_add_face_multiple_periodicity_with_transformation_function(c, theFace1_ids_c, theFace1_ids.size(),
2385 theFace2_ids_c, theFace2_ids.size(), periodicity_transformation, NULL);
2386 if(status != STATUS_OK)
2387 cout << "cad_add_face_multiple_periodicity_with_transformation_function failed with error code " << status << "\n";
2391 // get the transformation vertices
2392 MESSAGE("periodicity with transformation vertices");
2393 double* theSourceVerticesCoords_c = &_preCadFacesIDsPeriodicityVector[i].theSourceVerticesCoords[0];
2394 double* theTargetVerticesCoords_c = &_preCadFacesIDsPeriodicityVector[i].theTargetVerticesCoords[0];
2395 int nbSourceVertices = _preCadFacesIDsPeriodicityVector[i].theSourceVerticesCoords.size()/3;
2396 int nbTargetVertices = _preCadFacesIDsPeriodicityVector[i].theTargetVerticesCoords.size()/3;
2398 MESSAGE("nbSourceVertices: " << nbSourceVertices << ", nbTargetVertices: " << nbTargetVertices);
2400 status = cad_add_face_multiple_periodicity_with_transformation_function_by_points(c, theFace1_ids_c, theFace1_ids.size(),
2401 theFace2_ids_c, theFace2_ids.size(), theSourceVerticesCoords_c, nbSourceVertices, theTargetVerticesCoords_c, nbTargetVertices);
2402 if(status != STATUS_OK)
2403 cout << "cad_add_face_multiple_periodicity_with_transformation_function_by_points failed with error code " << status << "\n";
2407 MESSAGE("END PRECAD FACES PERIODICITY");
2410 MESSAGE("_preCadEdgesIDsPeriodicityVector.size() = " << _preCadEdgesIDsPeriodicityVector.size());
2411 if (! _preCadEdgesIDsPeriodicityVector.empty()) {
2412 MESSAGE("INTO PRECAD EDGES PERIODICITY");
2413 for (std::size_t i=0; i < _preCadEdgesIDsPeriodicityVector.size(); i++){
2414 std::vector<int> theEdge1_ids = _preCadEdgesIDsPeriodicityVector[i].shape1IDs;
2415 std::vector<int> theEdge2_ids = _preCadEdgesIDsPeriodicityVector[i].shape2IDs;
2416 // Use the address of the first element of the vector to initialise the array
2417 int* theEdge1_ids_c = &theEdge1_ids[0];
2418 int* theEdge2_ids_c = &theEdge2_ids[0];
2420 std::ostringstream o;
2421 o << "_preCadEdgesIDsPeriodicityVector[" << i << "] = [";
2422 for (std::size_t j=0; j < theEdge1_ids.size(); j++)
2423 o << theEdge1_ids[j] << ", ";
2425 for (std::size_t j=0; j < theEdge2_ids.size(); j++)
2426 o << theEdge2_ids[j] << ", ";
2429 MESSAGE("theEdge1_ids.size(): " << theEdge1_ids.size());
2430 MESSAGE("theEdge2_ids.size(): " << theEdge2_ids.size());
2432 if (_preCadEdgesIDsPeriodicityVector[i].theSourceVerticesCoords.empty())
2434 // If no source points, call peridoicity without transformation function
2435 MESSAGE("periodicity without transformation function");
2436 meshgems_cad_periodicity_transformation_t periodicity_transformation = NULL;
2437 status = cad_add_edge_multiple_periodicity_with_transformation_function(c, theEdge1_ids_c, theEdge1_ids.size(),
2438 theEdge2_ids_c, theEdge2_ids.size(), periodicity_transformation, NULL);
2439 if(status != STATUS_OK)
2440 cout << "cad_add_edge_multiple_periodicity_with_transformation_function failed with error code " << status << "\n";
2444 // get the transformation vertices
2445 MESSAGE("periodicity with transformation vertices");
2446 double* theSourceVerticesCoords_c = &_preCadEdgesIDsPeriodicityVector[i].theSourceVerticesCoords[0];
2447 double* theTargetVerticesCoords_c = &_preCadEdgesIDsPeriodicityVector[i].theTargetVerticesCoords[0];
2448 int nbSourceVertices = _preCadEdgesIDsPeriodicityVector[i].theSourceVerticesCoords.size()/3;
2449 int nbTargetVertices = _preCadEdgesIDsPeriodicityVector[i].theTargetVerticesCoords.size()/3;
2451 MESSAGE("nbSourceVertices: " << nbSourceVertices << ", nbTargetVertices: " << nbTargetVertices);
2453 status = cad_add_edge_multiple_periodicity_with_transformation_function_by_points(c, theEdge1_ids_c, theEdge1_ids.size(),
2454 theEdge2_ids_c, theEdge2_ids.size(), theSourceVerticesCoords_c, nbSourceVertices, theTargetVerticesCoords_c, nbTargetVertices);
2455 if(status != STATUS_OK)
2456 cout << "cad_add_edge_multiple_periodicity_with_transformation_function_by_points failed with error code " << status << "\n";
2458 MESSAGE("cad_add_edge_multiple_periodicity_with_transformation_function_by_points succeeded.\n");
2462 MESSAGE("END PRECAD EDGES PERIODICITY");
2466 // TODO: be able to use a mesh in input.
2467 // See imsh usage in Products/templates/mg-cadsurf_template_common.cpp
2468 // => cadsurf_set_mesh
2470 // Use the original dcad
2471 cadsurf_set_dcad(css, dcad);
2473 // Use the original cad
2474 cadsurf_set_cad(css, c);
2476 std::cout << std::endl;
2477 std::cout << "Beginning of Surface Mesh generation" << std::endl;
2478 std::cout << std::endl;
2483 status = cadsurf_compute_mesh(css);
2486 catch ( std::exception& exc ) {
2487 _comment += exc.what();
2489 catch (Standard_Failure& ex) {
2490 _comment += ex.DynamicType()->Name();
2491 if ( ex.GetMessageString() && strlen( ex.GetMessageString() )) {
2493 _comment += ex.GetMessageString();
2497 if ( _comment.empty() )
2498 _comment = "Exception in cadsurf_compute_mesh()";
2501 std::cout << std::endl;
2502 std::cout << "End of Surface Mesh generation" << std::endl;
2503 std::cout << std::endl;
2506 cadsurf_get_mesh(css, &msh);
2508 /* release the mesh object */
2509 cadsurf_regain_mesh(css, msh);
2510 return error(_comment);
2513 std::string GMFFileName = BLSURFPlugin_Hypothesis::GetDefaultGMFFile();
2515 GMFFileName = _hypothesis->GetGMFFile();
2516 if (GMFFileName != "") {
2517 bool asciiFound = (GMFFileName.find(".mesh", GMFFileName.length()-5) != std::string::npos);
2518 bool binaryFound = (GMFFileName.find(".meshb",GMFFileName.length()-6) != std::string::npos);
2519 if (!asciiFound && !binaryFound)
2520 GMFFileName.append(".mesh");
2521 mesh_write_mesh(msh, GMFFileName.c_str());
2524 /* retrieve mesh data (see meshgems/mesh.h) */
2525 integer nv, ne, nt, nq, vtx[4], tag, nb_tag;
2526 integer *evedg, *evtri, *evquad, *tags_buff, type;
2529 mesh_get_vertex_count(msh, &nv);
2530 mesh_get_edge_count(msh, &ne);
2531 mesh_get_triangle_count(msh, &nt);
2532 mesh_get_quadrangle_count(msh, &nq);
2534 evedg = (integer *)mesh_calloc_generic_buffer(msh);
2535 evtri = (integer *)mesh_calloc_generic_buffer(msh);
2536 evquad = (integer *)mesh_calloc_generic_buffer(msh);
2537 tags_buff = (integer*)mesh_calloc_generic_buffer(msh);
2539 std::vector<const SMDS_MeshNode*> nodes(nv+1);
2540 std::vector<bool> tags(nv+1);
2542 /* enumerated vertices */
2543 for(int iv=1;iv<=nv;iv++) {
2544 mesh_get_vertex_coordinates(msh, iv, xyz);
2545 mesh_get_vertex_tag(msh, iv, &tag);
2546 // Issue 0020656. Use vertex coordinates
2548 if ( tag > 0 && tag <= pmap.Extent() ) {
2549 TopoDS_Vertex v = TopoDS::Vertex(pmap(tag));
2550 double tol = BRep_Tool::Tolerance( v );
2551 gp_Pnt p = BRep_Tool::Pnt( v );
2552 if ( p.IsEqual( gp_Pnt( xyz[0], xyz[1], xyz[2]), 2*tol))
2553 xyz[0] = p.X(), xyz[1] = p.Y(), xyz[2] = p.Z();
2555 tag = 0; // enforced or attracted vertex
2556 nodes[iv] = SMESH_Algo::VertexNode( v, meshDS );
2559 nodes[iv] = meshDS->AddNode(xyz[0], xyz[1], xyz[2]);
2561 // Create group of enforced vertices if requested
2562 BLSURFPlugin_Hypothesis::TEnfVertexCoords projVertex;
2564 projVertex.push_back((double)xyz[0]);
2565 projVertex.push_back((double)xyz[1]);
2566 projVertex.push_back((double)xyz[2]);
2567 std::map< BLSURFPlugin_Hypothesis::TEnfVertexCoords, BLSURFPlugin_Hypothesis::TEnfVertexList >::const_iterator enfCoordsIt = EnfVertexCoords2EnfVertexList.find(projVertex);
2568 if (enfCoordsIt != EnfVertexCoords2EnfVertexList.end()) {
2569 MESSAGE("Found enforced vertex @ " << xyz[0] << ", " << xyz[1] << ", " << xyz[2]);
2570 BLSURFPlugin_Hypothesis::TEnfVertexList::const_iterator enfListIt = enfCoordsIt->second.begin();
2571 BLSURFPlugin_Hypothesis::TEnfVertex *currentEnfVertex;
2572 for (; enfListIt != enfCoordsIt->second.end(); ++enfListIt) {
2573 currentEnfVertex = (*enfListIt);
2574 if (currentEnfVertex->grpName != "") {
2575 bool groupDone = false;
2576 SMESH_Mesh::GroupIteratorPtr grIt = aMesh.GetGroups();
2577 MESSAGE("currentEnfVertex->grpName: " << currentEnfVertex->grpName);
2578 MESSAGE("Parsing the groups of the mesh");
2579 while (grIt->more()) {
2580 SMESH_Group * group = grIt->next();
2581 if ( !group ) continue;
2582 MESSAGE("Group: " << group->GetName());
2583 SMESHDS_GroupBase* groupDS = group->GetGroupDS();
2584 if ( !groupDS ) continue;
2585 MESSAGE("group->SMDSGroup().GetType(): " << (groupDS->GetType()));
2586 MESSAGE("group->SMDSGroup().GetType()==SMDSAbs_Node: " << (groupDS->GetType()==SMDSAbs_Node));
2587 MESSAGE("currentEnfVertex->grpName.compare(group->GetStoreName())==0: " << (currentEnfVertex->grpName.compare(group->GetName())==0));
2588 if ( groupDS->GetType()==SMDSAbs_Node && currentEnfVertex->grpName.compare(group->GetName())==0) {
2589 SMESHDS_Group* aGroupDS = static_cast<SMESHDS_Group*>( groupDS );
2590 aGroupDS->SMDSGroup().Add(nodes[iv]);
2591 MESSAGE("Node ID: " << nodes[iv]->GetID());
2592 // How can I inform the hypothesis ?
2593 // _hypothesis->AddEnfVertexNodeID(currentEnfVertex->grpName,nodes[iv]->GetID());
2595 MESSAGE("Successfully added enforced vertex to existing group " << currentEnfVertex->grpName);
2602 SMESH_Group* aGroup = aMesh.AddGroup(SMDSAbs_Node, currentEnfVertex->grpName.c_str(), groupId);
2603 aGroup->SetName( currentEnfVertex->grpName.c_str() );
2604 SMESHDS_Group* aGroupDS = static_cast<SMESHDS_Group*>( aGroup->GetGroupDS() );
2605 aGroupDS->SMDSGroup().Add(nodes[iv]);
2606 MESSAGE("Successfully created enforced vertex group " << currentEnfVertex->grpName);
2610 throw SALOME_Exception(LOCALIZED("An enforced vertex node was not added to a group"));
2613 MESSAGE("Group name is empty: '"<<currentEnfVertex->grpName<<"' => group is not created");
2617 // internal points are tagged to zero
2618 if(tag > 0 && tag <= pmap.Extent() ){
2619 meshDS->SetNodeOnVertex(nodes[iv], TopoDS::Vertex(pmap(tag)));
2626 /* enumerate edges */
2627 for(int it=1;it<=ne;it++) {
2629 mesh_get_edge_vertices(msh, it, vtx);
2630 mesh_get_edge_extra_vertices(msh, it, &type, evedg);
2631 mesh_get_edge_tag(msh, it, &tag);
2633 // If PreCAD performed some cleaning operations (remove tiny edges,
2634 // merge edges ...) an output tag can indeed represent several original tags.
2635 // Get the initial tags corresponding to the output tag and redefine the tag as
2636 // the last of the two initial tags (else the output tag is out of emap and hasn't any meaning)
2637 mesh_get_composite_tag_definition(msh, tag, &nb_tag, tags_buff);
2639 tag=tags_buff[nb_tag-1];
2640 if ( tag < 1 || tag > emap.Extent() )
2642 std::cerr << "MG-CADSurf BUG:::: Edge tag " << tag
2643 << " does not point to a CAD edge (nb edges " << emap.Extent() << ")" << std::endl;
2647 Set_NodeOnEdge(meshDS, nodes[vtx[0]], emap(tag));
2648 tags[vtx[0]] = false;
2651 Set_NodeOnEdge(meshDS, nodes[vtx[1]], emap(tag));
2652 tags[vtx[1]] = false;
2654 if (type == MESHGEMS_MESH_ELEMENT_TYPE_EDGE3) {
2656 if (tags[evedg[0]]) {
2657 Set_NodeOnEdge(meshDS, nodes[evedg[0]], emap(tag));
2658 tags[evedg[0]] = false;
2660 edg = meshDS->AddEdge(nodes[vtx[0]], nodes[vtx[1]], nodes[evedg[0]]);
2663 edg = helper.AddEdge(nodes[vtx[0]], nodes[vtx[1]]);
2665 meshDS->SetMeshElementOnShape(edg, TopoDS::Edge(emap(tag)));
2668 /* enumerate triangles */
2669 for(int it=1;it<=nt;it++) {
2671 mesh_get_triangle_vertices(msh, it, vtx);
2672 mesh_get_triangle_extra_vertices(msh, it, &type, evtri);
2673 mesh_get_triangle_tag(msh, it, &tag);
2675 meshDS->SetNodeOnFace(nodes[vtx[0]], tag);
2676 tags[vtx[0]] = false;
2679 meshDS->SetNodeOnFace(nodes[vtx[1]], tag);
2680 tags[vtx[1]] = false;
2683 meshDS->SetNodeOnFace(nodes[vtx[2]], tag);
2684 tags[vtx[2]] = false;
2686 if (type == MESHGEMS_MESH_ELEMENT_TYPE_TRIA6) {
2687 // QUADRATIC TRIANGLE
2688 if (tags[evtri[0]]) {
2689 meshDS->SetNodeOnFace(nodes[evtri[0]], tag);
2690 tags[evtri[0]] = false;
2692 if (tags[evtri[1]]) {
2693 meshDS->SetNodeOnFace(nodes[evtri[1]], tag);
2694 tags[evtri[1]] = false;
2696 if (tags[evtri[2]]) {
2697 meshDS->SetNodeOnFace(nodes[evtri[2]], tag);
2698 tags[evtri[2]] = false;
2700 tri = meshDS->AddFace(nodes[vtx[0]], nodes[vtx[1]], nodes[vtx[2]],
2701 nodes[evtri[0]], nodes[evtri[1]], nodes[evtri[2]]);
2704 tri = helper.AddFace(nodes[vtx[0]], nodes[vtx[1]], nodes[vtx[2]]);
2706 meshDS->SetMeshElementOnShape(tri, tag);
2709 /* enumerate quadrangles */
2710 for(int it=1;it<=nq;it++) {
2711 SMDS_MeshFace* quad;
2712 mesh_get_quadrangle_vertices(msh, it, vtx);
2713 mesh_get_quadrangle_extra_vertices(msh, it, &type, evquad);
2714 mesh_get_quadrangle_tag(msh, it, &tag);
2716 meshDS->SetNodeOnFace(nodes[vtx[0]], tag);
2717 tags[vtx[0]] = false;
2720 meshDS->SetNodeOnFace(nodes[vtx[1]], tag);
2721 tags[vtx[1]] = false;
2724 meshDS->SetNodeOnFace(nodes[vtx[2]], tag);
2725 tags[vtx[2]] = false;
2728 meshDS->SetNodeOnFace(nodes[vtx[3]], tag);
2729 tags[vtx[3]] = false;
2731 if (type == MESHGEMS_MESH_ELEMENT_TYPE_QUAD9) {
2732 // QUADRATIC QUADRANGLE
2733 std::cout << "This is a quadratic quadrangle" << std::endl;
2734 if (tags[evquad[0]]) {
2735 meshDS->SetNodeOnFace(nodes[evquad[0]], tag);
2736 tags[evquad[0]] = false;
2738 if (tags[evquad[1]]) {
2739 meshDS->SetNodeOnFace(nodes[evquad[1]], tag);
2740 tags[evquad[1]] = false;
2742 if (tags[evquad[2]]) {
2743 meshDS->SetNodeOnFace(nodes[evquad[2]], tag);
2744 tags[evquad[2]] = false;
2746 if (tags[evquad[3]]) {
2747 meshDS->SetNodeOnFace(nodes[evquad[3]], tag);
2748 tags[evquad[3]] = false;
2750 if (tags[evquad[4]]) {
2751 meshDS->SetNodeOnFace(nodes[evquad[4]], tag);
2752 tags[evquad[4]] = false;
2754 quad = meshDS->AddFace(nodes[vtx[0]], nodes[vtx[1]], nodes[vtx[2]], nodes[vtx[3]],
2755 nodes[evquad[0]], nodes[evquad[1]], nodes[evquad[2]], nodes[evquad[3]],
2759 quad = helper.AddFace(nodes[vtx[0]], nodes[vtx[1]], nodes[vtx[2]], nodes[vtx[3]]);
2761 meshDS->SetMeshElementOnShape(quad, tag);
2764 /* release the mesh object, the rest is released by cleaner */
2765 cadsurf_regain_mesh(css, msh);
2767 if ( needMerge ) // sew mesh computed by MG-CADSurf with pre-existing mesh
2769 SMESH_MeshEditor editor( &aMesh );
2770 SMESH_MeshEditor::TListOfListOfNodes nodeGroupsToMerge;
2771 TIDSortedElemSet segementsOnEdge;
2772 TSubMeshSet::iterator smIt;
2773 SMESHDS_SubMesh* smDS;
2775 // merge nodes on EDGE's with ones computed by MG-CADSurf
2776 for ( smIt = mergeSubmeshes.begin(); smIt != mergeSubmeshes.end(); ++smIt )
2778 if (! (smDS = *smIt) ) continue;
2779 getNodeGroupsToMerge( smDS, meshDS->IndexToShape((*smIt)->GetID()), nodeGroupsToMerge );
2781 SMDS_ElemIteratorPtr segIt = smDS->GetElements();
2782 while ( segIt->more() )
2783 segementsOnEdge.insert( segIt->next() );
2786 editor.MergeNodes( nodeGroupsToMerge );
2789 SMESH_MeshEditor::TListOfListOfElementsID equalSegments;
2790 editor.FindEqualElements( segementsOnEdge, equalSegments );
2791 editor.MergeElements( equalSegments );
2793 // remove excess segments created on the boundary of viscous layers
2794 const SMDS_TypeOfPosition onFace = SMDS_TOP_FACE;
2795 for ( int i = 1; i <= emap.Extent(); ++i )
2797 if ( SMESHDS_SubMesh* smDS = meshDS->MeshElements( emap( i )))
2799 SMDS_ElemIteratorPtr segIt = smDS->GetElements();
2800 while ( segIt->more() )
2802 const SMDS_MeshElement* seg = segIt->next();
2803 if ( seg->GetNode(0)->GetPosition()->GetTypeOfPosition() == onFace ||
2804 seg->GetNode(1)->GetPosition()->GetTypeOfPosition() == onFace )
2805 meshDS->RemoveFreeElement( seg, smDS );
2811 // Remove free nodes that can appear e.g. if "remove tiny edges"(IPAL53235)
2812 for(int iv=1;iv<=nv;iv++)
2813 if ( nodes[iv] && nodes[iv]->NbInverseElements() == 0 )
2814 meshDS->RemoveFreeNode( nodes[iv], 0, /*fromGroups=*/false );
2817 // SetIsAlwaysComputed( true ) to sub-meshes of EDGEs w/o mesh
2818 for (int i = 1; i <= emap.Extent(); i++)
2819 if ( SMESH_subMesh* sm = aMesh.GetSubMeshContaining( emap( i )))
2820 sm->SetIsAlwaysComputed( true );
2821 for (int i = 1; i <= pmap.Extent(); i++)
2822 if ( SMESH_subMesh* sm = aMesh.GetSubMeshContaining( pmap( i )))
2823 if ( !sm->IsMeshComputed() )
2824 sm->SetIsAlwaysComputed( true );
2826 // Set error to FACE's w/o elements
2827 SMESH_ComputeErrorName err = COMPERR_ALGO_FAILED;
2828 if ( _comment.empty() && status == STATUS_OK )
2830 err = COMPERR_WARNING;
2831 _comment = "No mesh elements assigned to a face";
2833 bool badFaceFound = false;
2834 for (TopExp_Explorer face_iter(aShape,TopAbs_FACE);face_iter.More();face_iter.Next())
2836 TopoDS_Face f = TopoDS::Face(face_iter.Current());
2837 SMESH_subMesh* sm = aMesh.GetSubMesh( f );
2838 if ( !sm->GetSubMeshDS() || sm->GetSubMeshDS()->NbElements() == 0 )
2840 sm->GetComputeError().reset( new SMESH_ComputeError( err, _comment, this ));
2841 badFaceFound = true;
2844 if ( err == COMPERR_WARNING )
2848 if ( status != STATUS_OK && !badFaceFound ) {
2852 // Issue 0019864. On DebianSarge, FE signals do not obey to OSD::SetSignal(false)
2854 if ( oldFEFlags > 0 )
2855 feenableexcept( oldFEFlags );
2856 feclearexcept( FE_ALL_EXCEPT );
2860 std::cout << "FacesWithSizeMap" << std::endl;
2861 FacesWithSizeMap.Statistics(std::cout);
2862 std::cout << "EdgesWithSizeMap" << std::endl;
2863 EdgesWithSizeMap.Statistics(std::cout);
2864 std::cout << "VerticesWithSizeMap" << std::endl;
2865 VerticesWithSizeMap.Statistics(std::cout);
2866 std::cout << "FacesWithEnforcedVertices" << std::endl;
2867 FacesWithEnforcedVertices.Statistics(std::cout);
2870 MESSAGE("END OF BLSURFPlugin_BLSURF::Compute()");
2871 return ( status == STATUS_OK && !quadraticSubMeshAndViscousLayer );
2874 //================================================================================
2876 * \brief Terminates computation
2878 //================================================================================
2880 void BLSURFPlugin_BLSURF::CancelCompute()
2882 _compute_canceled = true;
2885 //=============================================================================
2889 //=============================================================================
2891 void BLSURFPlugin_BLSURF::Set_NodeOnEdge(SMESHDS_Mesh* meshDS, const SMDS_MeshNode* node, const TopoDS_Shape& ed) {
2892 const TopoDS_Edge edge = TopoDS::Edge(ed);
2894 gp_Pnt pnt(node->X(), node->Y(), node->Z());
2896 Standard_Real p0 = 0.0;
2897 Standard_Real p1 = 1.0;
2898 TopLoc_Location loc;
2899 Handle(Geom_Curve) curve = BRep_Tool::Curve(edge, loc, p0, p1);
2900 if ( curve.IsNull() )
2902 // issue 22499. Node at a sphere apex
2903 meshDS->SetNodeOnEdge(node, edge, p0);
2907 if ( !loc.IsIdentity() ) pnt.Transform( loc.Transformation().Inverted() );
2908 GeomAPI_ProjectPointOnCurve proj(pnt, curve, p0, p1);
2911 if ( proj.NbPoints() > 0 )
2913 pa = (double)proj.LowerDistanceParameter();
2914 // Issue 0020656. Move node if it is too far from edge
2915 gp_Pnt curve_pnt = curve->Value( pa );
2916 double dist2 = pnt.SquareDistance( curve_pnt );
2917 double tol = BRep_Tool::Tolerance( edge );
2918 if ( 1e-14 < dist2 && dist2 <= 1000*tol ) // large enough and within tolerance
2920 curve_pnt.Transform( loc );
2921 meshDS->MoveNode( node, curve_pnt.X(), curve_pnt.Y(), curve_pnt.Z() );
2925 meshDS->SetNodeOnEdge(node, edge, pa);
2928 /* Curve definition function See cad_curv_t in file meshgems/cad.h for
2930 * NOTE : if when your CAD systems evaluates second
2931 * order derivatives it also computes first order derivatives and
2932 * function evaluation, you can optimize this example by making only
2933 * one CAD call and filling the necessary uv, dt, dtt arrays.
2935 status_t curv_fun(real t, real *uv, real *dt, real *dtt, void *user_data)
2937 /* t is given. It contains the t (time) 1D parametric coordintaes
2938 of the point PreCAD/MG-CADSurf is querying on the curve */
2940 /* user_data identifies the edge PreCAD/MG-CADSurf is querying
2941 * (see cad_edge_new later in this example) */
2942 const Geom2d_Curve*pargeo = (const Geom2d_Curve*) user_data;
2945 /* MG-CADSurf is querying the function evaluation */
2948 uv[0]=P.X(); uv[1]=P.Y();
2952 /* query for the first order derivatives */
2955 dt[0]=V1.X(); dt[1]=V1.Y();
2959 /* query for the second order derivatives */
2962 dtt[0]=V2.X(); dtt[1]=V2.Y();
2968 /* Surface definition function.
2969 * See cad_surf_t in file meshgems/cad.h for more information.
2970 * NOTE : if when your CAD systems evaluates second order derivatives it also
2971 * computes first order derivatives and function evaluation, you can optimize
2972 * this example by making only one CAD call and filling the necessary xyz, du, dv, etc..
2975 status_t surf_fun(real *uv, real *xyz, real*du, real *dv,
2976 real *duu, real *duv, real *dvv, void *user_data)
2978 /* uv[2] is given. It contains the u,v coordinates of the point
2979 * PreCAD/MG-CADSurf is querying on the surface */
2981 /* user_data identifies the face PreCAD/MG-CADSurf is querying (see
2982 * cad_face_new later in this example)*/
2983 const Geom_Surface* geometry = (const Geom_Surface*) user_data;
2987 P=geometry->Value(uv[0],uv[1]); // S.D0(U,V,P);
2988 xyz[0]=P.X(); xyz[1]=P.Y(); xyz[2]=P.Z();
2995 geometry->D1(uv[0],uv[1],P,D1U,D1V);
2996 du[0]=D1U.X(); du[1]=D1U.Y(); du[2]=D1U.Z();
2997 dv[0]=D1V.X(); dv[1]=D1V.Y(); dv[2]=D1V.Z();
3000 if(duu && duv && dvv){
3004 gp_Vec D2U,D2V,D2UV;
3006 geometry->D2(uv[0],uv[1],P,D1U,D1V,D2U,D2V,D2UV);
3007 duu[0]=D2U.X(); duu[1]=D2U.Y(); duu[2]=D2U.Z();
3008 duv[0]=D2UV.X(); duv[1]=D2UV.Y(); duv[2]=D2UV.Z();
3009 dvv[0]=D2V.X(); dvv[1]=D2V.Y(); dvv[2]=D2V.Z();
3016 status_t size_on_surface(integer face_id, real *uv, real *size, void *user_data)
3018 TId2ClsAttractorVec::iterator f2attVec;
3019 if (FaceId2PythonSmp.count(face_id) != 0){
3020 assert(Py_IsInitialized());
3021 PyGILState_STATE gstate;
3022 gstate = PyGILState_Ensure();
3023 PyObject* pyresult = PyObject_CallFunction(FaceId2PythonSmp[face_id],(char*)"(f,f)",uv[0],uv[1]);
3025 if ( pyresult != NULL) {
3026 result = PyFloat_AsDouble(pyresult);
3027 Py_DECREF(pyresult);
3032 string err_description="";
3033 PyObject* new_stderr = newPyStdOut(err_description);
3034 PyObject* old_stderr = PySys_GetObject((char*)"stderr");
3035 Py_INCREF(old_stderr);
3036 PySys_SetObject((char*)"stderr", new_stderr);
3038 PySys_SetObject((char*)"stderr", old_stderr);
3039 Py_DECREF(new_stderr);
3040 MESSAGE("Can't evaluate f(" << uv[0] << "," << uv[1] << ")" << " error is " << err_description);
3041 result = *((real*)user_data);
3044 PyGILState_Release(gstate);
3046 else if (( f2attVec = FaceIndex2ClassAttractor.find(face_id)) != FaceIndex2ClassAttractor.end() && !f2attVec->second.empty()){
3047 // MESSAGE("attractor used on face :"<<face_id)
3048 // MESSAGE("List of attractor is not empty")
3049 // MESSAGE("Attractor empty : "<< FaceIndex2ClassAttractor[face_id]->Empty())
3052 std::vector< BLSURFPlugin_Attractor* > & attVec = f2attVec->second;
3053 for ( size_t i = 0; i < attVec.size(); ++i )
3055 //result += attVec[i]->GetSize(uv[0],uv[1]);
3056 result = Min( result, attVec[i]->GetSize(uv[0],uv[1]));
3058 //*size = result / attVec.size(); // mean of sizes defined by all attractors
3062 // MESSAGE("List of attractor is empty !!!")
3063 *size = *((real*)user_data);
3065 // std::cout << "Size_on_surface sur la face " << face_id << " donne une size de: " << *size << std::endl;
3069 status_t size_on_edge(integer edge_id, real t, real *size, void *user_data)
3071 if (EdgeId2PythonSmp.count(edge_id) != 0){
3072 assert(Py_IsInitialized());
3073 PyGILState_STATE gstate;
3074 gstate = PyGILState_Ensure();
3075 PyObject* pyresult = PyObject_CallFunction(EdgeId2PythonSmp[edge_id],(char*)"(f)",t);
3077 if ( pyresult != NULL) {
3078 result = PyFloat_AsDouble(pyresult);
3079 Py_DECREF(pyresult);
3084 string err_description="";
3085 PyObject* new_stderr = newPyStdOut(err_description);
3086 PyObject* old_stderr = PySys_GetObject((char*)"stderr");
3087 Py_INCREF(old_stderr);
3088 PySys_SetObject((char*)"stderr", new_stderr);
3090 PySys_SetObject((char*)"stderr", old_stderr);
3091 Py_DECREF(new_stderr);
3092 MESSAGE("Can't evaluate f(" << t << ")" << " error is " << err_description);
3093 result = *((real*)user_data);
3096 PyGILState_Release(gstate);
3099 *size = *((real*)user_data);
3104 status_t size_on_vertex(integer point_id, real *size, void *user_data)
3106 if (VertexId2PythonSmp.count(point_id) != 0){
3107 assert(Py_IsInitialized());
3108 PyGILState_STATE gstate;
3109 gstate = PyGILState_Ensure();
3110 PyObject* pyresult = PyObject_CallFunction(VertexId2PythonSmp[point_id],(char*)"");
3112 if ( pyresult != NULL) {
3113 result = PyFloat_AsDouble(pyresult);
3114 Py_DECREF(pyresult);
3119 string err_description="";
3120 PyObject* new_stderr = newPyStdOut(err_description);
3121 PyObject* old_stderr = PySys_GetObject((char*)"stderr");
3122 Py_INCREF(old_stderr);
3123 PySys_SetObject((char*)"stderr", new_stderr);
3125 PySys_SetObject((char*)"stderr", old_stderr);
3126 Py_DECREF(new_stderr);
3127 MESSAGE("Can't evaluate f()" << " error is " << err_description);
3128 result = *((real*)user_data);
3131 PyGILState_Release(gstate);
3134 *size = *((real*)user_data);
3140 * The following function will be called for PreCAD/MG-CADSurf message
3141 * printing. See context_set_message_callback (later in this
3142 * template) for how to set user_data.
3144 status_t message_cb(message_t *msg, void *user_data)
3146 integer errnumber = 0;
3148 message_get_number(msg, &errnumber);
3149 message_get_description(msg, &desc);
3151 message_cb_user_data * mcud = (message_cb_user_data*)user_data;
3152 // Get all the error message and some warning messages related to license and periodicity
3153 if ( errnumber < 0 ||
3154 err.find("license" ) != string::npos ||
3155 err.find("periodicity") != string::npos )
3157 // remove ^A from the tail
3158 int len = strlen( desc );
3159 while (len > 0 && desc[len-1] != '\n')
3161 mcud->_error->append( desc, len );
3164 if ( errnumber == 3009001 )
3165 * mcud->_progress = atof( desc + 11 ) / 100.;
3166 if ( mcud->_verbosity > 0 )
3167 std::cout << desc << std::endl;
3172 /* This is the interrupt callback. PreCAD/MG-CADSurf will call this
3173 * function regularily. See the file meshgems/interrupt.h
3175 status_t interrupt_cb(integer *interrupt_status, void *user_data)
3177 integer you_want_to_continue = 1;
3178 BLSURFPlugin_BLSURF* tmp = (BLSURFPlugin_BLSURF*)user_data;
3179 you_want_to_continue = !tmp->computeCanceled();
3181 if(you_want_to_continue)
3183 *interrupt_status = INTERRUPT_CONTINUE;
3186 else /* you want to stop MG-CADSurf */
3188 *interrupt_status = INTERRUPT_STOP;
3189 return STATUS_ERROR;
3193 //=============================================================================
3197 //=============================================================================
3198 bool BLSURFPlugin_BLSURF::Evaluate(SMESH_Mesh& aMesh,
3199 const TopoDS_Shape& aShape,
3200 MapShapeNbElems& aResMap)
3202 double diagonal = aMesh.GetShapeDiagonalSize();
3203 double bbSegmentation = _gen->GetBoundaryBoxSegmentation();
3204 int _physicalMesh = BLSURFPlugin_Hypothesis::GetDefaultPhysicalMesh();
3205 double _phySize = BLSURFPlugin_Hypothesis::GetDefaultPhySize(diagonal, bbSegmentation);
3206 bool _phySizeRel = BLSURFPlugin_Hypothesis::GetDefaultPhySizeRel();
3207 //int _geometricMesh = BLSURFPlugin_Hypothesis::GetDefaultGeometricMesh();
3208 double _angleMesh = BLSURFPlugin_Hypothesis::GetDefaultAngleMesh();
3209 bool _quadAllowed = BLSURFPlugin_Hypothesis::GetDefaultQuadAllowed();
3211 _physicalMesh = (int) _hypothesis->GetPhysicalMesh();
3212 _phySizeRel = _hypothesis->IsPhySizeRel();
3213 if ( _hypothesis->GetPhySize() > 0)
3214 _phySize = _phySizeRel ? diagonal*_hypothesis->GetPhySize() : _hypothesis->GetPhySize();
3215 //_geometricMesh = (int) hyp->GetGeometricMesh();
3216 if (_hypothesis->GetAngleMesh() > 0)
3217 _angleMesh = _hypothesis->GetAngleMesh();
3218 _quadAllowed = _hypothesis->GetQuadAllowed();
3220 //0020968: EDF1545 SMESH: Problem in the creation of a mesh group on geometry
3221 // GetDefaultPhySize() sometimes leads to computation failure
3222 _phySize = aMesh.GetShapeDiagonalSize() / _gen->GetBoundaryBoxSegmentation();
3223 MESSAGE("BLSURFPlugin_BLSURF::SetParameters using defaults");
3226 bool IsQuadratic = _quadraticMesh;
3231 TopTools_DataMapOfShapeInteger EdgesMap;
3232 double fullLen = 0.0;
3233 double fullNbSeg = 0;
3234 for (TopExp_Explorer exp(aShape, TopAbs_EDGE); exp.More(); exp.Next()) {
3235 TopoDS_Edge E = TopoDS::Edge( exp.Current() );
3236 if( EdgesMap.IsBound(E) )
3238 SMESH_subMesh *sm = aMesh.GetSubMesh(E);
3239 double aLen = SMESH_Algo::EdgeLength(E);
3242 if(_physicalMesh==1) {
3243 nb1d = (int)( aLen/_phySize + 1 );
3248 Handle(Geom_Curve) C = BRep_Tool::Curve(E,f,l);
3249 double fullAng = 0.0;
3250 double dp = (l-f)/200;
3255 for(int j=2; j<=200; j++) {
3258 fullAng += fabs(V1.Angle(V2));
3262 nb1d = (int)( fullAng/_angleMesh + 1 );
3265 std::vector<int> aVec(SMDSEntity_Last);
3266 for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
3267 if( IsQuadratic > 0 ) {
3268 aVec[SMDSEntity_Node] = 2*nb1d - 1;
3269 aVec[SMDSEntity_Quad_Edge] = nb1d;
3272 aVec[SMDSEntity_Node] = nb1d - 1;
3273 aVec[SMDSEntity_Edge] = nb1d;
3275 aResMap.insert(std::make_pair(sm,aVec));
3276 EdgesMap.Bind(E,nb1d);
3278 double ELen = fullLen/fullNbSeg;
3282 // try to evaluate as in MEFISTO
3283 for (TopExp_Explorer exp(aShape, TopAbs_FACE); exp.More(); exp.Next()) {
3284 TopoDS_Face F = TopoDS::Face( exp.Current() );
3285 SMESH_subMesh *sm = aMesh.GetSubMesh(F);
3287 BRepGProp::SurfaceProperties(F,G);
3288 double anArea = G.Mass();
3290 std::vector<int> nb1dVec;
3291 for (TopExp_Explorer exp1(F,TopAbs_EDGE); exp1.More(); exp1.Next()) {
3292 int nbSeg = EdgesMap.Find(exp1.Current());
3294 nb1dVec.push_back( nbSeg );
3297 int nbTria = (int) ( anArea/( ELen*ELen*sqrt(3.) / 4 ) );
3298 int nbNodes = (int) ( ( nbTria*3 - (nb1d-1)*2 ) / 6 + 1 );
3301 if ( nb1dVec.size() == 4 ) // quadrangle geom face
3303 int n1 = nb1dVec[0], n2 = nb1dVec[ nb1dVec[1] == nb1dVec[0] ? 2 : 1 ];
3305 nbNodes = (n1 + 1) * (n2 + 1);
3310 nbTria = nbQuad = nbTria / 3 + 1;
3313 std::vector<int> aVec(SMDSEntity_Last,0);
3315 int nb1d_in = (nbTria*3 - nb1d) / 2;
3316 aVec[SMDSEntity_Node] = nbNodes + nb1d_in;
3317 aVec[SMDSEntity_Quad_Triangle] = nbTria;
3318 aVec[SMDSEntity_Quad_Quadrangle] = nbQuad;
3321 aVec[SMDSEntity_Node] = nbNodes;
3322 aVec[SMDSEntity_Triangle] = nbTria;
3323 aVec[SMDSEntity_Quadrangle] = nbQuad;
3325 aResMap.insert(std::make_pair(sm,aVec));
3332 BRepGProp::VolumeProperties(aShape,G);
3333 double aVolume = G.Mass();
3334 double tetrVol = 0.1179*ELen*ELen*ELen;
3335 int nbVols = int(aVolume/tetrVol);
3336 int nb1d_in = int(( nbVols*6 - fullNbSeg ) / 6 );
3337 std::vector<int> aVec(SMDSEntity_Last);
3338 for(int i=SMDSEntity_Node; i<SMDSEntity_Last; i++) aVec[i]=0;
3340 aVec[SMDSEntity_Node] = nb1d_in/3 + 1 + nb1d_in;
3341 aVec[SMDSEntity_Quad_Tetra] = nbVols;
3344 aVec[SMDSEntity_Node] = nb1d_in/3 + 1;
3345 aVec[SMDSEntity_Tetra] = nbVols;
3347 SMESH_subMesh *sm = aMesh.GetSubMesh(aShape);
3348 aResMap.insert(std::make_pair(sm,aVec));