1 ! Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
3 ! Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
4 ! CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
6 ! This library is free software; you can redistribute it and/or
7 ! modify it under the terms of the GNU Lesser General Public
8 ! License as published by the Free Software Foundation; either
9 ! version 2.1 of the License.
11 ! This library is distributed in the hope that it will be useful,
12 ! but WITHOUT ANY WARRANTY; without even the implied warranty of
13 ! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 ! Lesser General Public License for more details.
16 ! You should have received a copy of the GNU Lesser General Public
17 ! License along with this library; if not, write to the Free Software
18 ! Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 ! See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
23 !--------------------------------------------------------------------
24 ! Parameters for Shape Healing
25 !--------------------------------------------------------------------
27 ShapeProcess.exec.op : FixShape,FixFaceSize,DropSmallEdges,SameParameter
29 ShapeProcess.SplitAngle.Angle : 3.1415928
30 ShapeProcess.SplitAngle.MaxTolerance : 0.1
31 ShapeProcess.SplitAngle.SegmentSurfaceMode : 1
33 ShapeProcess.SplitClosedFaces.NbSplitPoints : 1
34 ShapeProcess.SplitClosedFaces.CloseTolerance : 0.05
35 ShapeProcess.SplitClosedFaces.MaxTolerance : 0.1
36 ShapeProcess.SplitClosedFaces.SegmentSurfaceMode : 1
38 ShapeProcess.FixFaceSize.Tolerance : 0.05
40 ShapeProcess.DropSmallEdges.Tolerance3d : 0.05
42 ShapeProcess.BSplineRestriction.SurfaceMode : 1
43 ShapeProcess.BSplineRestriction.Curve3dMode : 1
44 ShapeProcess.BSplineRestriction.Curve2dMode : 1
45 ShapeProcess.BSplineRestriction.OffsetSurfaceMode : 1
46 ShapeProcess.BSplineRestriction.OffsetCurve3dMode : 1
47 ShapeProcess.BSplineRestriction.OffsetCurve2dMode : 1
48 ShapeProcess.BSplineRestriction.LinearExtrusionMode : 1
49 ShapeProcess.BSplineRestriction.RevolutionMode : 1
50 ShapeProcess.BSplineRestriction.Tolerance3d : 1e-3
51 ShapeProcess.BSplineRestriction.Tolerance2d : 1e-5
52 ShapeProcess.BSplineRestriction.Continuity3d : C1
53 ShapeProcess.BSplineRestriction.Continuity2d : C1
54 ShapeProcess.BSplineRestriction.RequiredDegree : 15
55 ShapeProcess.BSplineRestriction.RequiredNbSegments : 100
56 ShapeProcess.BSplineRestriction.PreferDegree : 1
57 ShapeProcess.BSplineRestriction.RationalToPolynomial : 1
58 ShapeProcess.BSplineRestriction.MaxDegree : 15
59 ShapeProcess.BSplineRestriction.MaxNbSegments : 10000
60 ShapeProcess.BSplineRestriction.SegmentSurfaceMode : 1
61 ShapeProcess.BSplineRestriction.ConvCurve3dMode : 0
62 ShapeProcess.BSplineRestriction.ConvCurve2dMode : 0
63 ShapeProcess.BSplineRestriction.PlaneMode : 0
64 ShapeProcess.BSplineRestriction.BezierMode : 0
66 ShapeProcess.SplitContinuity.Tolerance3d :1.e-3
67 ShapeProcess.SplitContinuity.SurfaceContinuity :C0
68 ShapeProcess.SplitContinuity.CurveContinuity :C1
70 ShapeProcess.ToBezier.EdgeMode : 0
71 ShapeProcess.ToBezier.SurfaceMode : 0
72 ShapeProcess.ToBezier.PlaneMode : 1
73 ShapeProcess.ToBezier.RevolutionMode : 1
74 ShapeProcess.ToBezier.ExtrusionMode : 1
75 ShapeProcess.ToBezier.BSplineMode : 1
76 ShapeProcess.ToBezier.Curve3dMode : 1
77 ShapeProcess.ToBezier.Curve2dMode : 1
78 ShapeProcess.ToBezier.Line3dMode : 1
79 ShapeProcess.ToBezier.Circle3dMode : 1
80 ShapeProcess.ToBezier.Conic3dMode : 1
81 ShapeProcess.ToBezier.MaxTolerance : 0.1
82 ShapeProcess.ToBezier.SegmentSurfaceMode : 1
83 ShapeProcess.ToBezier.MinCurveLength : 0.05
85 ShapeProcess.FixShape.Tolerance3d : 1.e-7
86 ShapeProcess.FixShape.MaxTolerance3d : 1
87 ShapeProcess.FixShape.MinTolerance3d : 1.e-7
88 ShapeProcess.FixShape.FixFreeShellMode : -1
89 ShapeProcess.FixShape.FixFreeFaceMode : -1
90 ShapeProcess.FixShape.FixFreeWireMode : -1
91 ShapeProcess.FixShape.FixSameParameterMode : -1
92 ShapeProcess.FixShape.FixSolidMode : -1
93 ShapeProcess.FixShape.FixShellMode : -1
94 ShapeProcess.FixShape.FixFaceMode : -1
95 ShapeProcess.FixShape.FixWireMode : -1
96 ShapeProcess.FixShape.FixOrientationMode : -1
97 ShapeProcess.FixShape.FixMissingSeamMode : -1
98 ShapeProcess.FixShape.FixSmallAreaWireMode : -1
99 ShapeProcess.FixShape.ModifyTopologyMode : 0
100 ShapeProcess.FixShape.ModifyGeometryMode : 1
101 ShapeProcess.FixShape.ClosedWireMode : 1
102 ShapeProcess.FixShape.PreferencePCurveMode : 1
103 ShapeProcess.FixShape.FixReorderMode : -1
104 ShapeProcess.FixShape.FixSmallMode : -1
105 ShapeProcess.FixShape.FixConnectedMode : -1
106 ShapeProcess.FixShape.FixEdgeCurvesMode : -1
107 ShapeProcess.FixShape.FixDegeneratedMode : -1
108 ShapeProcess.FixShape.FixLackingMode : -1
109 ShapeProcess.FixShape.FixSelfIntersectionMode : -1
110 ShapeProcess.FixShape.FixReversed2dMode : -1
111 ShapeProcess.FixShape.FixRemovePCurveMode : -1
112 ShapeProcess.FixShape.FixRemoveCurve3dMode : -1
113 ShapeProcess.FixShape.FixAddPCurveMode : -1
114 ShapeProcess.FixShape.FixAddCurve3dMode : -1
115 ShapeProcess.FixShape.FixSeamMode : -1
116 ShapeProcess.FixShape.FixShiftedMode : -1
117 ShapeProcess.FixShape.FixEdgeSameParameterMode : 0
118 ShapeProcess.FixShape.FixSelfIntersectingEdgeMode : -1
119 ShapeProcess.FixShape.FixIntersectingEdgesMode : -1
120 ShapeProcess.FixShape.FixNonAdjacentIntersectingEdgesMode : -1
121 ShapeProcess.FixShape.FixIntersectingWiresMode : -1
122 ShapeProcess.FixShape.FixLoopWiresMode : -1
123 ShapeProcess.FixShape.CreateOpenSolidMode :0
125 ShapeProcess.SameParameter.Force : 0
126 ShapeProcess.SameParameter.Tolerance3d : 1.e-7
128 !===========================================================================
129 ! Description of parameters for Operations
130 !===========================================================================
131 ! .MaxTolerance : Maximal tolerance for comparing curves, points which is
132 ! used by splitting tools. The tools that are used this
133 ! parameter are the following: SplitAngle, SplitClosedFaces,
134 ! ToBezier. This value should be the same for all tools in
135 ! one sequence. To redefine default value uncomment
136 ! appropriate line in each operator.
137 ! .SegmentSurfaceMode : Mode for limiting surface by UV boundaries of face that
138 ! is based on this surface. If flag is 1 the surface is
139 ! limited. This mode is used by splitting tools (SplitAngle,
140 ! SplitClosedFaces, ToBezier). This value should be the same
141 ! for all tools in one sequence. To redefine default value
142 ! uncomment appropriate line in each operator.
143 ! BSplineRestriction : Approximation of general B-Spline and Bezier with particular B-Spline
144 ! BSplineRestriction.ConvCurve3dMode : Mode of conversion of any 3D curve to BSpline and approximation,
145 ! BSplineRestriction.ConvCurve2dMode : Mode of conversion of any 2D curve to BSpline and approximation,
146 ! BSplineRestriction.PlaneMode : Mode of conversion of Geom_Plane to BSpline surface,
147 ! BSplineRestriction.BezierMode : Mode of conversion of Besier surface to BSpline and approximation,
148 ! BSplineRestriction.SurfaceMode : Mode of approximation of surfaces if restriction is necessary, yes/no
149 ! BSplineRestriction.Curve3dMode : Mode of approximation of 3D curves if restriction is necessary, yes/no
150 ! BSplineRestriction.Curve2dMode : Mode of approximation of 2D curves if restriction is necessary, yes/no
151 ! BSplineRestriction.OffsetSurfaceMode : Mode of conversion of offset surfaces to BSpline surface, yes/no
152 ! : Yes - surface is converted to BSpline surface
153 ! : No - basis surface is processed but offset surface is kept.
154 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
155 ! BSplineRestriction.LinearExtrusionMode: Mode of conversion of linear extrusion surfaces to BSpline surface, yes/no
156 ! : Yes - surface is converted to BSpline surface
157 ! : No - basis curve is processed but extrusion surface is kept.
158 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
159 ! BSplineRestriction.RevolutionMode : Mode of conversion surfaces of revolution to BSpline surface, yes/no
160 ! : Yes - surface is converted to BSpline surface
161 ! : No - basis curve is processed but revolution surface is kept.
162 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
163 ! BSplineRestriction.OffsetCurve3dMode : Mode of conversion of 3d offset curves to BSpline curves, yes/no
164 ! : Yes - curve is converted to BSpline curve
165 ! : No - basis curve is processed but offset curve is kept.
166 ! : This mode acts if BSplineRestriction.Curve3dMode is yes.
167 ! BSplineRestriction.OffsetCurve2dMode : Mode of conversion of 2d offset curves to BSpline curves, yes/no
168 ! : Yes - curve is converted to BSpline curve
169 ! : No - basis curve is processed but offset curve is kept.
170 ! : This mode acts if BSplineRestriction.Curve2dMode is yes.
171 ! BSplineRestriction.Tolerance3d : Tolerance of 3D approximation
172 ! BSplineRestriction.Tolerance2d : Tolerance of 2D approximation
173 ! BSplineRestriction.Continuity3d : Required continuity of 3D geometry
174 ! BSplineRestriction.Continuity2d : Required continuity of 2D geometry
175 ! BSplineRestriction.RequiredDegree : Required degree of B-Spline
176 ! BSplineRestriction.RequiredNbSegments : Required maximum number of segments of B-Spline
177 ! BSplineRestriction.PreferDegree : Preference between requirement to degree and maximum number of segments, true/false
178 ! BSplineRestriction.RationalToPolynomial: Mode of conversion of rational B-Spline to polynomial, yes/no
179 ! BSplineRestriction.MaxDegree : Maximum allowed degree of B-Spline
180 ! BSplineRestriction.MaxNbSegments : Maximum allowed number of segments in a B-Spline
182 ! DirectFaces : Conversion of elementary surface in left-handed coordinate system into right-handed
185 ! ElementaryToRevolution : Conversion of elementary revolutive surface into general surface of revolution
188 ! SameParameter : Conversion of edge to be SameRange and SameParameter
189 ! SameParameter.Force : Mode of forced invoking, true/false
190 ! SameParameter.Tolerance3d : 3D tolerance
192 ! SplitAngle : Split revolutive surface (elementary and general) into several surfaces
193 ! SplitAngle.Angle : Maximum angle of revolution, radian
195 ! SplitClosedFaces : Split faces that have seam-edge or geometrically closed on closed surface.
196 ! SplitClosedFaces.NbSplitPoints : Number of cuttings (number of resulting faces will be NbSplitPoints+1)
197 ! SplitClosedFaces.CloseTolerance : Precision to define geometric closure.
199 ! SplitContinuity : Correction or split shapes to have speicified continuity
200 ! SplitContinuity.Tolerance3d : 3D tolerance for correction of geometry
201 ! SplitContinuity.SurfaceContinuity : Required continuity for surfaces
202 ! SplitContinuity.CurveContinuity : Required continuity for curves
204 ! ToBezier : Conversion of geometry into Bezier
205 ! ToBezier.SurfaceMode : Mode of conversion of surfaces, yes/no
206 ! ToBezier.PlaneMode : Mode of conversion of Planes,yes/no. This mode acts if SurfaceMode is yes.
207 ! ToBezier.RevolutionMode : Mode of conversion of Surfaces of Revolution (generatrix to bezier), yes/no.
208 ! This mode acts if SurfaceMode is yes.
209 ! ToBezier.ExtrusionMode : Mode of conversion of Surfaces of Extrusion (whole surface not only generatrix), yes/no.
210 ! This mode acts if SurfaceMode is yes.
211 ! ToBezier.BSplineMode : Mode of conversion of BSpline Surfaces, yes/no. This mode acts if SurfaceMode is yes.
212 ! ToBezier.EdgeMode : Mode of translation edges (0- Free,1 - Shared,2- Both)
213 ! : .Default - Free. Acts on translation curves 3d .
214 | : If it is 0 (Free) that only free edges are taken into
215 ! : account for translation 3d curves,
216 ! : if it is 1 (Shared) that only shared edges are taken into
217 ! : account for translation 3d curves,
218 ! : if it is 2 (Both) that all edges are taken into
219 ! : account for translation 3d curves,
220 ! ToBezier.Curve3dMode : Mode of conversion 3D curves, yes/no
221 ! ToBezier.Curve2dMode : Mode of conversion 2D curves, yes/no
222 ! ToBezier.Line3dMode : Mode of conversion 3D lines, yes/no
223 ! ToBezier.Circle3dMode : Mode of conversion 3D circles, yes/no
224 ! ToBezier.Conic3dMode : Mode of conversion 3D conics, yes/no
225 ! ToBezier.MinCurveLength : Min length of created curves 3d.( default 0.05)
228 ! FixFaceSize : Removing small faces
229 ! FixFaceSize.Tolerance : Tolerance in 3d
231 ! DropSmallEdges : Eliminate small edges by removing or merging with neighbour
232 ! DropSmallEdges.Tolerance3d : Tolerance (3d)
234 ! FixShape.Tolerance3d : Tolerance (3d) for fixing of shape.
235 ! FixShape.MaxTolerance3d : Maximal possible value of increasing of tolerance during fixing.
236 ! FixShape.MinTolerance3d : Minimal value of tolerance.
237 ! FixShape.FixFreeShellMode : Mode for fixing free shells in the shape (default - -1, yes - 1 , no - 0).
238 ! FixShape.FixFreeFaceMode : Mode for fixing free faces in the shape (default - -1, yes - 1 , no - 0).
239 ! FixShape.FixFreeWireMode : Mode for fixing free wires in the shape (default - -1, yes - 1 , no - 0).
240 ! FixShape.FixSameParameterMode : Mode for fixing same parameter on the whole shape (default - -1, yes - 1 , no - 0).
241 ! FixShape.FixSolidMode : Mode for fixing solids (default - -1, yes - 1 , no - 0).
242 ! FixShape.FixShellMode : Mode for fixing shells (default - -1, yes - 1 , no - 0).
243 ! FixShape.FixFaceMode : Mode for fixing faces (default - -1, yes - 1 , no - 0).
244 ! FixShape.FixWireMode : Mode for fixing wires (default - -1, yes - 1 , no - 0).
245 ! FixShape.FixOrientationMode : Mode for fixing face orientation (default - -1, yes - 1 , no - 0).
246 ! FixShape.FixMissingSeamMode : Mode for fixing face missing seam (default - -1, yes - 1 , no - 0).
247 ! FixShape.FixSmallAreaWireMode : Mode for fixing small area wires (default - -1, yes - 1 , no - 0).
248 ! FixShape.ModifyTopologyMode : Mode allowing of modifing of topology (default - 0, yes - 1 , no - 0).
249 ! FixShape.ModifyGeometryMode : Mode allowing of modifing of geometry (default - 1, yes - 1 , no - 0).
250 ! FixShape.ClosedWireMode : Mode defining whether the wire is to be closed. (default - 1, yes - 1 , no - 0).
251 ! FixShape.PreferencePCurveMode : Mode defining of preference of 2d representation (default - 1, yes - 1 , no - 0).
252 ! FixShape.FixReorderMode : Mode for fixing of order of the edges in the wire (default - -1, yes - 1 , no - 0).
253 ! FixShape.FixSmallMode : Mode for removing of the small edges from the wire in the case when
254 ! : ModifyTopologyMode equaled "yes" (default - -1, yes - 1 , no - 0).
255 ! FixShape.FixConnectedMode : Mode for fixing of connecting of edges in the wire(default - -1, yes - 1 , no - 0).
256 ! FixShape.FixEdgeCurvesMode : Moge for fixing each edge from the wire (default - -1, yes - 1 , no - 0).
257 ! FixShape.FixDegeneratedMode : Moge for fixing cases of degenerate pcurve (default - -1, yes - 1 , no - 0).
258 ! FixShape.FixLackingMode : Moge for fixing cases of lacking edge (default - -1, yes - 1 , no - 0).
259 ! FixShape.FixSelfIntersectionMode : Mode for fixing of cases self-intersection of wire (default - -1, yes - 1 , no - 0).
260 ! FixShape.FixReversed2dMode : Mode for fixing cases when pcurve is opposite curve3d (default - -1, yes - 1 , no - 0).
261 ! FixShape.FixRemovePCurveMode : Mode for removing of pcurves from edges (default - -1, yes - 1 , no - 0).
262 ! FixShape.FixRemoveCurve3dMode : Mode for removing of 3d curves from edges (default - -1, yes - 1 , no - 0).
263 ! FixShape.FixAddPCurveMode : Mode for adding pcurves of the edges if missing (default - -1, yes - 1 , no - 0).
264 ! FixShape.FixAddCurve3dMode : Mode for adding curves 3d of the edges if missing (default - -1, yes - 1 , no - 0).
265 ! FixShape.FixSeamMode : Mode for fixing cases of seam edges.
266 ! FixShape.FixShiftedMode : Mode for fixing cases when pcurves can be shifted on period on the closed surface
267 ! (default - -1, yes - 1 , no - 0).
268 ! FixShape.FixEdgeSameParameterMode : Mode for fixing same parameter for each edge (default - -1, yes - 1 , no - 0).
269 ! FixShape.FixSelfIntersectingEdgeMode : Mode for fixing cases self-intrsection edge (default - -1, yes - 1 , no - 0).
270 ! FixShape.FixIntersectingEdgesMode : Mode for fixing intersection adjacent edges.
271 ! FixShape.FixNonAdjacentIntersectingEdgesMode : Mode for fixing intersection non-adjacent edges.