2 !--------------------------------------------------------------------
3 ! Parameters for Shape Healing
4 !--------------------------------------------------------------------
6 ShapeProcess.exec.op : FixShape,FixFaceSize,DropSmallEdges,SameParameter
8 ShapeProcess.SplitAngle.Angle : 3.1415928
9 ShapeProcess.SplitAngle.MaxTolerance : 0.1
10 ShapeProcess.SplitAngle.SegmentSurfaceMode : 1
12 ShapeProcess.SplitClosedFaces.NbSplitPoints : 1
13 ShapeProcess.SplitClosedFaces.CloseTolerance : 0.05
14 ShapeProcess.SplitClosedFaces.MaxTolerance : 0.1
15 ShapeProcess.SplitClosedFaces.SegmentSurfaceMode : 1
17 ShapeProcess.FixFaceSize.Tolerance : 0.05
19 ShapeProcess.DropSmallEdges.Tolerance3d : 0.05
21 ShapeProcess.DropSmallSolids.WidthFactorThreshold : 1
22 ShapeProcess.DropSmallSolids.VolumeThreshold : 1000
23 ShapeProcess.DropSmallSolids.MergeSolids : 1
25 ShapeProcess.BSplineRestriction.SurfaceMode : 1
26 ShapeProcess.BSplineRestriction.Curve3dMode : 1
27 ShapeProcess.BSplineRestriction.Curve2dMode : 1
28 ShapeProcess.BSplineRestriction.OffsetSurfaceMode : 1
29 ShapeProcess.BSplineRestriction.OffsetCurve3dMode : 1
30 ShapeProcess.BSplineRestriction.OffsetCurve2dMode : 1
31 ShapeProcess.BSplineRestriction.LinearExtrusionMode : 1
32 ShapeProcess.BSplineRestriction.RevolutionMode : 1
33 ShapeProcess.BSplineRestriction.Tolerance3d : 1e-3
34 ShapeProcess.BSplineRestriction.Tolerance2d : 1e-5
35 ShapeProcess.BSplineRestriction.Continuity3d : C1
36 ShapeProcess.BSplineRestriction.Continuity2d : C1
37 ShapeProcess.BSplineRestriction.RequiredDegree : 15
38 ShapeProcess.BSplineRestriction.RequiredNbSegments : 100
39 ShapeProcess.BSplineRestriction.PreferDegree : 1
40 ShapeProcess.BSplineRestriction.RationalToPolynomial : 1
41 ShapeProcess.BSplineRestriction.MaxDegree : 15
42 ShapeProcess.BSplineRestriction.MaxNbSegments : 10000
43 ShapeProcess.BSplineRestriction.SegmentSurfaceMode : 1
44 ShapeProcess.BSplineRestriction.ConvCurve3dMode : 0
45 ShapeProcess.BSplineRestriction.ConvCurve2dMode : 0
46 ShapeProcess.BSplineRestriction.PlaneMode : 0
47 ShapeProcess.BSplineRestriction.BezierMode : 0
49 ShapeProcess.SplitContinuity.Tolerance3d :1.e-3
50 ShapeProcess.SplitContinuity.SurfaceContinuity :C0
51 ShapeProcess.SplitContinuity.CurveContinuity :C1
53 ShapeProcess.ToBezier.EdgeMode : 0
54 ShapeProcess.ToBezier.SurfaceMode : 0
55 ShapeProcess.ToBezier.PlaneMode : 1
56 ShapeProcess.ToBezier.RevolutionMode : 1
57 ShapeProcess.ToBezier.ExtrusionMode : 1
58 ShapeProcess.ToBezier.BSplineMode : 1
59 ShapeProcess.ToBezier.Curve3dMode : 1
60 ShapeProcess.ToBezier.Curve2dMode : 1
61 ShapeProcess.ToBezier.Line3dMode : 1
62 ShapeProcess.ToBezier.Circle3dMode : 1
63 ShapeProcess.ToBezier.Conic3dMode : 1
64 ShapeProcess.ToBezier.MaxTolerance : 0.1
65 ShapeProcess.ToBezier.SegmentSurfaceMode : 1
66 ShapeProcess.ToBezier.MinCurveLength : 0.05
68 ShapeProcess.FixShape.Tolerance3d : 1.e-7
69 ShapeProcess.FixShape.MaxTolerance3d : 1
70 ShapeProcess.FixShape.MinTolerance3d : 1.e-7
71 ShapeProcess.FixShape.FixFreeShellMode : -1
72 ShapeProcess.FixShape.FixFreeFaceMode : -1
73 ShapeProcess.FixShape.FixFreeWireMode : -1
74 ShapeProcess.FixShape.FixSameParameterMode : -1
75 ShapeProcess.FixShape.FixSolidMode : -1
76 ShapeProcess.FixShape.FixShellMode : -1
77 ShapeProcess.FixShape.FixFaceMode : -1
78 ShapeProcess.FixShape.FixWireMode : -1
79 ShapeProcess.FixShape.FixOrientationMode : -1
80 ShapeProcess.FixShape.FixMissingSeamMode : -1
81 ShapeProcess.FixShape.FixSmallAreaWireMode : -1
82 ShapeProcess.FixShape.ModifyTopologyMode : 0
83 ShapeProcess.FixShape.ModifyGeometryMode : 1
84 ShapeProcess.FixShape.ClosedWireMode : 1
85 ShapeProcess.FixShape.PreferencePCurveMode : 1
86 ShapeProcess.FixShape.FixReorderMode : -1
87 ShapeProcess.FixShape.FixSmallMode : -1
88 ShapeProcess.FixShape.FixConnectedMode : -1
89 ShapeProcess.FixShape.FixEdgeCurvesMode : -1
90 ShapeProcess.FixShape.FixDegeneratedMode : -1
91 ShapeProcess.FixShape.FixLackingMode : -1
92 ShapeProcess.FixShape.FixSelfIntersectionMode : -1
93 ShapeProcess.FixShape.FixReversed2dMode : -1
94 ShapeProcess.FixShape.FixRemovePCurveMode : -1
95 ShapeProcess.FixShape.FixRemoveCurve3dMode : -1
96 ShapeProcess.FixShape.FixAddPCurveMode : -1
97 ShapeProcess.FixShape.FixAddCurve3dMode : -1
98 ShapeProcess.FixShape.FixSeamMode : -1
99 ShapeProcess.FixShape.FixShiftedMode : -1
100 ShapeProcess.FixShape.FixEdgeSameParameterMode : 0
101 ShapeProcess.FixShape.FixSelfIntersectingEdgeMode : -1
102 ShapeProcess.FixShape.FixIntersectingEdgesMode : -1
103 ShapeProcess.FixShape.FixNonAdjacentIntersectingEdgesMode : -1
104 ShapeProcess.FixShape.FixIntersectingWiresMode : -1
105 ShapeProcess.FixShape.FixLoopWiresMode : -1
106 ShapeProcess.FixShape.CreateOpenSolidMode :0
108 ShapeProcess.SameParameter.Force : 0
109 ShapeProcess.SameParameter.Tolerance3d : 1.e-7
111 !===========================================================================
112 ! Description of parameters for Operations
113 !===========================================================================
114 ! .MaxTolerance : Maximal tolerance for comparing curves, points which is
115 ! used by splitting tools. The tools that are used this
116 ! parameter are the following: SplitAngle, SplitClosedFaces,
117 ! ToBezier. This value should be the same for all tools in
118 ! one sequence. To redefine default value uncomment
119 ! appropriate line in each operator.
120 ! .SegmentSurfaceMode : Mode for limiting surface by UV boundaries of face that
121 ! is based on this surface. If flag is 1 the surface is
122 ! limited. This mode is used by splitting tools (SplitAngle,
123 ! SplitClosedFaces, ToBezier). This value should be the same
124 ! for all tools in one sequence. To redefine default value
125 ! uncomment appropriate line in each operator.
126 ! BSplineRestriction : Approximation of general B-Spline and Bezier with particular B-Spline
127 ! BSplineRestriction.ConvCurve3dMode : Mode of conversion of any 3D curve to BSpline and approximation,
128 ! BSplineRestriction.ConvCurve2dMode : Mode of conversion of any 2D curve to BSpline and approximation,
129 ! BSplineRestriction.PlaneMode : Mode of conversion of Geom_Plane to BSpline surface,
130 ! BSplineRestriction.BezierMode : Mode of conversion of Besier surface to BSpline and approximation,
131 ! BSplineRestriction.SurfaceMode : Mode of approximation of surfaces if restriction is necessary, yes/no
132 ! BSplineRestriction.Curve3dMode : Mode of approximation of 3D curves if restriction is necessary, yes/no
133 ! BSplineRestriction.Curve2dMode : Mode of approximation of 2D curves if restriction is necessary, yes/no
134 ! BSplineRestriction.OffsetSurfaceMode : Mode of conversion of offset surfaces to BSpline surface, yes/no
135 ! : Yes - surface is converted to BSpline surface
136 ! : No - basis surface is processed but offset surface is kept.
137 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
138 ! BSplineRestriction.LinearExtrusionMode: Mode of conversion of linear extrusion surfaces to BSpline surface, yes/no
139 ! : Yes - surface is converted to BSpline surface
140 ! : No - basis curve is processed but extrusion surface is kept.
141 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
142 ! BSplineRestriction.RevolutionMode : Mode of conversion surfaces of revolution to BSpline surface, yes/no
143 ! : Yes - surface is converted to BSpline surface
144 ! : No - basis curve is processed but revolution surface is kept.
145 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
146 ! BSplineRestriction.OffsetCurve3dMode : Mode of conversion of 3d offset curves to BSpline curves, yes/no
147 ! : Yes - curve is converted to BSpline curve
148 ! : No - basis curve is processed but offset curve is kept.
149 ! : This mode acts if BSplineRestriction.Curve3dMode is yes.
150 ! BSplineRestriction.OffsetCurve2dMode : Mode of conversion of 2d offset curves to BSpline curves, yes/no
151 ! : Yes - curve is converted to BSpline curve
152 ! : No - basis curve is processed but offset curve is kept.
153 ! : This mode acts if BSplineRestriction.Curve2dMode is yes.
154 ! BSplineRestriction.Tolerance3d : Tolerance of 3D approximation
155 ! BSplineRestriction.Tolerance2d : Tolerance of 2D approximation
156 ! BSplineRestriction.Continuity3d : Required continuity of 3D geometry
157 ! BSplineRestriction.Continuity2d : Required continuity of 2D geometry
158 ! BSplineRestriction.RequiredDegree : Required degree of B-Spline
159 ! BSplineRestriction.RequiredNbSegments : Required maximum number of segments of B-Spline
160 ! BSplineRestriction.PreferDegree : Preference between requirement to degree and maximum number of segments, true/false
161 ! BSplineRestriction.RationalToPolynomial: Mode of conversion of rational B-Spline to polynomial, yes/no
162 ! BSplineRestriction.MaxDegree : Maximum allowed degree of B-Spline
163 ! BSplineRestriction.MaxNbSegments : Maximum allowed number of segments in a B-Spline
165 ! DirectFaces : Conversion of elementary surface in left-handed coordinate system into right-handed
168 ! ElementaryToRevolution : Conversion of elementary revolutive surface into general surface of revolution
171 ! SameParameter : Conversion of edge to be SameRange and SameParameter
172 ! SameParameter.Force : Mode of forced invoking, true/false
173 ! SameParameter.Tolerance3d : 3D tolerance
175 ! SplitAngle : Split revolutive surface (elementary and general) into several surfaces
176 ! SplitAngle.Angle : Maximum angle of revolution, radian
178 ! SplitClosedFaces : Split faces that have seam-edge or geometrically closed on closed surface.
179 ! SplitClosedFaces.NbSplitPoints : Number of cuttings (number of resulting faces will be NbSplitPoints+1)
180 ! SplitClosedFaces.CloseTolerance : Precision to define geometric closure.
182 ! SplitContinuity : Correction or split shapes to have speicified continuity
183 ! SplitContinuity.Tolerance3d : 3D tolerance for correction of geometry
184 ! SplitContinuity.SurfaceContinuity : Required continuity for surfaces
185 ! SplitContinuity.CurveContinuity : Required continuity for curves
187 ! ToBezier : Conversion of geometry into Bezier
188 ! ToBezier.SurfaceMode : Mode of conversion of surfaces, yes/no
189 ! ToBezier.PlaneMode : Mode of conversion of Planes,yes/no. This mode acts if SurfaceMode is yes.
190 ! ToBezier.RevolutionMode : Mode of conversion of Surfaces of Revolution (generatrix to bezier), yes/no.
191 ! This mode acts if SurfaceMode is yes.
192 ! ToBezier.ExtrusionMode : Mode of conversion of Surfaces of Extrusion (whole surface not only generatrix), yes/no.
193 ! This mode acts if SurfaceMode is yes.
194 ! ToBezier.BSplineMode : Mode of conversion of BSpline Surfaces, yes/no. This mode acts if SurfaceMode is yes.
195 ! ToBezier.EdgeMode : Mode of translation edges (0- Free,1 - Shared,2- Both)
196 ! : .Default - Free. Acts on translation curves 3d .
197 | : If it is 0 (Free) that only free edges are taken into
198 ! : account for translation 3d curves,
199 ! : if it is 1 (Shared) that only shared edges are taken into
200 ! : account for translation 3d curves,
201 ! : if it is 2 (Both) that all edges are taken into
202 ! : account for translation 3d curves,
203 ! ToBezier.Curve3dMode : Mode of conversion 3D curves, yes/no
204 ! ToBezier.Curve2dMode : Mode of conversion 2D curves, yes/no
205 ! ToBezier.Line3dMode : Mode of conversion 3D lines, yes/no
206 ! ToBezier.Circle3dMode : Mode of conversion 3D circles, yes/no
207 ! ToBezier.Conic3dMode : Mode of conversion 3D conics, yes/no
208 ! ToBezier.MinCurveLength : Min length of created curves 3d.( default 0.05)
211 ! FixFaceSize : Removing small faces
212 ! FixFaceSize.Tolerance : Tolerance in 3d
214 ! DropSmallEdges : Eliminate small edges by removing or merging with neighbour
215 ! DropSmallEdges.Tolerance3d : Tolerance (3d)
217 ! DropSmallSolids : Eliminate small solids by a) removing them or b) absorbing them by adjacent larger solids.
218 ! DropSmallSolids.WidthFactorThreshold : Maximum value of 2V/S of a solid where V is volume and S is surface area of the solid.
219 ! DropSmallSolids.VolumeThreshold : Maximum volume of a solid.
220 ! DropSmallSolids.MergeSolids : If false, solids are removed; otherwise, solids are merged to adjacent larger solids.
222 ! FixShape.Tolerance3d : Tolerance (3d) for fixing of shape.
223 ! FixShape.MaxTolerance3d : Maximal possible value of increasing of tolerance during fixing.
224 ! FixShape.MinTolerance3d : Minimal value of tolerance.
225 ! FixShape.FixFreeShellMode : Mode for fixing free shells in the shape (default - -1, yes - 1 , no - 0).
226 ! FixShape.FixFreeFaceMode : Mode for fixing free faces in the shape (default - -1, yes - 1 , no - 0).
227 ! FixShape.FixFreeWireMode : Mode for fixing free wires in the shape (default - -1, yes - 1 , no - 0).
228 ! FixShape.FixSameParameterMode : Mode for fixing same parameter on the whole shape (default - -1, yes - 1 , no - 0).
229 ! FixShape.FixSolidMode : Mode for fixing solids (default - -1, yes - 1 , no - 0).
230 ! FixShape.FixShellMode : Mode for fixing shells (default - -1, yes - 1 , no - 0).
231 ! FixShape.FixFaceMode : Mode for fixing faces (default - -1, yes - 1 , no - 0).
232 ! FixShape.FixWireMode : Mode for fixing wires (default - -1, yes - 1 , no - 0).
233 ! FixShape.FixOrientationMode : Mode for fixing face orientation (default - -1, yes - 1 , no - 0).
234 ! FixShape.FixMissingSeamMode : Mode for fixing face missing seam (default - -1, yes - 1 , no - 0).
235 ! FixShape.FixSmallAreaWireMode : Mode for fixing small area wires (default - -1, yes - 1 , no - 0).
236 ! FixShape.ModifyTopologyMode : Mode allowing of modifing of topology (default - 0, yes - 1 , no - 0).
237 ! FixShape.ModifyGeometryMode : Mode allowing of modifing of geometry (default - 1, yes - 1 , no - 0).
238 ! FixShape.ClosedWireMode : Mode defining whether the wire is to be closed. (default - 1, yes - 1 , no - 0).
239 ! FixShape.PreferencePCurveMode : Mode defining of preference of 2d representation (default - 1, yes - 1 , no - 0).
240 ! FixShape.FixReorderMode : Mode for fixing of order of the edges in the wire (default - -1, yes - 1 , no - 0).
241 ! FixShape.FixSmallMode : Mode for removing of the small edges from the wire in the case when
242 ! : ModifyTopologyMode equaled "yes" (default - -1, yes - 1 , no - 0).
243 ! FixShape.FixConnectedMode : Mode for fixing of connecting of edges in the wire(default - -1, yes - 1 , no - 0).
244 ! FixShape.FixEdgeCurvesMode : Moge for fixing each edge from the wire (default - -1, yes - 1 , no - 0).
245 ! FixShape.FixDegeneratedMode : Moge for fixing cases of degenerate pcurve (default - -1, yes - 1 , no - 0).
246 ! FixShape.FixLackingMode : Moge for fixing cases of lacking edge (default - -1, yes - 1 , no - 0).
247 ! FixShape.FixSelfIntersectionMode : Mode for fixing of cases self-intersection of wire (default - -1, yes - 1 , no - 0).
248 ! FixShape.FixReversed2dMode : Mode for fixing cases when pcurve is opposite curve3d (default - -1, yes - 1 , no - 0).
249 ! FixShape.FixRemovePCurveMode : Mode for removing of pcurves from edges (default - -1, yes - 1 , no - 0).
250 ! FixShape.FixRemoveCurve3dMode : Mode for removing of 3d curves from edges (default - -1, yes - 1 , no - 0).
251 ! FixShape.FixAddPCurveMode : Mode for adding pcurves of the edges if missing (default - -1, yes - 1 , no - 0).
252 ! FixShape.FixAddCurve3dMode : Mode for adding curves 3d of the edges if missing (default - -1, yes - 1 , no - 0).
253 ! FixShape.FixSeamMode : Mode for fixing cases of seam edges.
254 ! FixShape.FixShiftedMode : Mode for fixing cases when pcurves can be shifted on period on the closed surface
255 ! (default - -1, yes - 1 , no - 0).
256 ! FixShape.FixEdgeSameParameterMode : Mode for fixing same parameter for each edge (default - -1, yes - 1 , no - 0).
257 ! FixShape.FixSelfIntersectingEdgeMode : Mode for fixing cases self-intrsection edge (default - -1, yes - 1 , no - 0).
258 ! FixShape.FixIntersectingEdgesMode : Mode for fixing intersection adjacent edges.
259 ! FixShape.FixNonAdjacentIntersectingEdgesMode : Mode for fixing intersection non-adjacent edges.
