2 !--------------------------------------------------------------------
3 ! Parameters for Shape Healing
4 !--------------------------------------------------------------------
6 ShapeProcess.exec.op : FixShape,FixFaceSize,DropSmallEdges,SameParameter
8 ShapeProcess.SplitAngle.Angle : 3.1415928
9 ShapeProcess.SplitAngle.MaxTolerance : 0.1
10 ShapeProcess.SplitAngle.SegmentSurfaceMode : 1
12 ShapeProcess.SplitClosedFaces.NbSplitPoints : 1
13 ShapeProcess.SplitClosedFaces.CloseTolerance : 0.05
14 ShapeProcess.SplitClosedFaces.MaxTolerance : 0.1
15 ShapeProcess.SplitClosedFaces.SegmentSurfaceMode : 1
17 ShapeProcess.FixFaceSize.Tolerance : 0.05
19 ShapeProcess.DropSmallEdges.Tolerance3d : 0.05
21 ShapeProcess.BSplineRestriction.SurfaceMode : 1
22 ShapeProcess.BSplineRestriction.Curve3dMode : 1
23 ShapeProcess.BSplineRestriction.Curve2dMode : 1
24 ShapeProcess.BSplineRestriction.OffsetSurfaceMode : 1
25 ShapeProcess.BSplineRestriction.OffsetCurve3dMode : 1
26 ShapeProcess.BSplineRestriction.OffsetCurve2dMode : 1
27 ShapeProcess.BSplineRestriction.LinearExtrusionMode : 1
28 ShapeProcess.BSplineRestriction.RevolutionMode : 1
29 ShapeProcess.BSplineRestriction.Tolerance3d : 1e-3
30 ShapeProcess.BSplineRestriction.Tolerance2d : 1e-5
31 ShapeProcess.BSplineRestriction.Continuity3d : C1
32 ShapeProcess.BSplineRestriction.Continuity2d : C1
33 ShapeProcess.BSplineRestriction.RequiredDegree : 15
34 ShapeProcess.BSplineRestriction.RequiredNbSegments : 100
35 ShapeProcess.BSplineRestriction.PreferDegree : 1
36 ShapeProcess.BSplineRestriction.RationalToPolynomial : 1
37 ShapeProcess.BSplineRestriction.MaxDegree : 15
38 ShapeProcess.BSplineRestriction.MaxNbSegments : 10000
39 ShapeProcess.BSplineRestriction.SegmentSurfaceMode : 1
40 ShapeProcess.BSplineRestriction.ConvCurve3dMode : 0
41 ShapeProcess.BSplineRestriction.ConvCurve2dMode : 0
42 ShapeProcess.BSplineRestriction.PlaneMode : 0
43 ShapeProcess.BSplineRestriction.BezierMode : 0
45 ShapeProcess.SplitContinuity.Tolerance3d :1.e-3
46 ShapeProcess.SplitContinuity.SurfaceContinuity :C0
47 ShapeProcess.SplitContinuity.CurveContinuity :C1
49 ShapeProcess.ToBezier.EdgeMode : 0
50 ShapeProcess.ToBezier.SurfaceMode : 0
51 ShapeProcess.ToBezier.PlaneMode : 1
52 ShapeProcess.ToBezier.RevolutionMode : 1
53 ShapeProcess.ToBezier.ExtrusionMode : 1
54 ShapeProcess.ToBezier.BSplineMode : 1
55 ShapeProcess.ToBezier.Curve3dMode : 1
56 ShapeProcess.ToBezier.Curve2dMode : 1
57 ShapeProcess.ToBezier.Line3dMode : 1
58 ShapeProcess.ToBezier.Circle3dMode : 1
59 ShapeProcess.ToBezier.Conic3dMode : 1
60 ShapeProcess.ToBezier.MaxTolerance : 0.1
61 ShapeProcess.ToBezier.SegmentSurfaceMode : 1
62 ShapeProcess.ToBezier.MinCurveLength : 0.05
64 ShapeProcess.FixShape.Tolerance3d : 1.e-7
65 ShapeProcess.FixShape.MaxTolerance3d : 1
66 ShapeProcess.FixShape.MinTolerance3d : 1.e-7
67 ShapeProcess.FixShape.FixFreeShellMode : -1
68 ShapeProcess.FixShape.FixFreeFaceMode : -1
69 ShapeProcess.FixShape.FixFreeWireMode : -1
70 ShapeProcess.FixShape.FixSameParameterMode : -1
71 ShapeProcess.FixShape.FixSolidMode : -1
72 ShapeProcess.FixShape.FixShellMode : -1
73 ShapeProcess.FixShape.FixFaceMode : -1
74 ShapeProcess.FixShape.FixWireMode : -1
75 ShapeProcess.FixShape.FixOrientationMode : -1
76 ShapeProcess.FixShape.FixMissingSeamMode : -1
77 ShapeProcess.FixShape.FixSmallAreaWireMode : -1
78 ShapeProcess.FixShape.ModifyTopologyMode : 0
79 ShapeProcess.FixShape.ModifyGeometryMode : 1
80 ShapeProcess.FixShape.ClosedWireMode : 1
81 ShapeProcess.FixShape.PreferencePCurveMode : 1
82 ShapeProcess.FixShape.FixReorderMode : -1
83 ShapeProcess.FixShape.FixSmallMode : -1
84 ShapeProcess.FixShape.FixConnectedMode : -1
85 ShapeProcess.FixShape.FixEdgeCurvesMode : -1
86 ShapeProcess.FixShape.FixDegeneratedMode : -1
87 ShapeProcess.FixShape.FixLackingMode : -1
88 ShapeProcess.FixShape.FixSelfIntersectionMode : -1
89 ShapeProcess.FixShape.FixReversed2dMode : -1
90 ShapeProcess.FixShape.FixRemovePCurveMode : -1
91 ShapeProcess.FixShape.FixRemoveCurve3dMode : -1
92 ShapeProcess.FixShape.FixAddPCurveMode : -1
93 ShapeProcess.FixShape.FixAddCurve3dMode : -1
94 ShapeProcess.FixShape.FixSeamMode : -1
95 ShapeProcess.FixShape.FixShiftedMode : -1
96 ShapeProcess.FixShape.FixEdgeSameParameterMode : 0
97 ShapeProcess.FixShape.FixSelfIntersectingEdgeMode : -1
98 ShapeProcess.FixShape.FixIntersectingEdgesMode : -1
99 ShapeProcess.FixShape.FixNonAdjacentIntersectingEdgesMode : -1
100 ShapeProcess.FixShape.FixIntersectingWiresMode : -1
101 ShapeProcess.FixShape.FixLoopWiresMode : -1
102 ShapeProcess.FixShape.CreateOpenSolidMode :0
104 ShapeProcess.SameParameter.Force : 0
105 ShapeProcess.SameParameter.Tolerance3d : 1.e-7
107 !===========================================================================
108 ! Description of parameters for Operations
109 !===========================================================================
110 ! .MaxTolerance : Maximal tolerance for comparing curves, points which is
111 ! used by splitting tools. The tools that are used this
112 ! parameter are the following: SplitAngle, SplitClosedFaces,
113 ! ToBezier. This value should be the same for all tools in
114 ! one sequence. To redefine default value uncomment
115 ! appropriate line in each operator.
116 ! .SegmentSurfaceMode : Mode for limiting surface by UV boundaries of face that
117 ! is based on this surface. If flag is 1 the surface is
118 ! limited. This mode is used by splitting tools (SplitAngle,
119 ! SplitClosedFaces, ToBezier). This value should be the same
120 ! for all tools in one sequence. To redefine default value
121 ! uncomment appropriate line in each operator.
122 ! BSplineRestriction : Approximation of general B-Spline and Bezier with particular B-Spline
123 ! BSplineRestriction.ConvCurve3dMode : Mode of conversion of any 3D curve to BSpline and approximation,
124 ! BSplineRestriction.ConvCurve2dMode : Mode of conversion of any 2D curve to BSpline and approximation,
125 ! BSplineRestriction.PlaneMode : Mode of conversion of Geom_Plane to BSpline surface,
126 ! BSplineRestriction.BezierMode : Mode of conversion of Besier surface to BSpline and approximation,
127 ! BSplineRestriction.SurfaceMode : Mode of approximation of surfaces if restriction is necessary, yes/no
128 ! BSplineRestriction.Curve3dMode : Mode of approximation of 3D curves if restriction is necessary, yes/no
129 ! BSplineRestriction.Curve2dMode : Mode of approximation of 2D curves if restriction is necessary, yes/no
130 ! BSplineRestriction.OffsetSurfaceMode : Mode of conversion of offset surfaces to BSpline surface, yes/no
131 ! : Yes - surface is converted to BSpline surface
132 ! : No - basis surface is processed but offset surface is kept.
133 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
134 ! BSplineRestriction.LinearExtrusionMode: Mode of conversion of linear extrusion surfaces to BSpline surface, yes/no
135 ! : Yes - surface is converted to BSpline surface
136 ! : No - basis curve is processed but extrusion surface is kept.
137 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
138 ! BSplineRestriction.RevolutionMode : Mode of conversion surfaces of revolution to BSpline surface, yes/no
139 ! : Yes - surface is converted to BSpline surface
140 ! : No - basis curve is processed but revolution surface is kept.
141 ! : This mode acts if BSplineRestriction.SurfaceMode is yes.
142 ! BSplineRestriction.OffsetCurve3dMode : Mode of conversion of 3d offset curves to BSpline curves, yes/no
143 ! : Yes - curve is converted to BSpline curve
144 ! : No - basis curve is processed but offset curve is kept.
145 ! : This mode acts if BSplineRestriction.Curve3dMode is yes.
146 ! BSplineRestriction.OffsetCurve2dMode : Mode of conversion of 2d offset curves to BSpline curves, yes/no
147 ! : Yes - curve is converted to BSpline curve
148 ! : No - basis curve is processed but offset curve is kept.
149 ! : This mode acts if BSplineRestriction.Curve2dMode is yes.
150 ! BSplineRestriction.Tolerance3d : Tolerance of 3D approximation
151 ! BSplineRestriction.Tolerance2d : Tolerance of 2D approximation
152 ! BSplineRestriction.Continuity3d : Required continuity of 3D geometry
153 ! BSplineRestriction.Continuity2d : Required continuity of 2D geometry
154 ! BSplineRestriction.RequiredDegree : Required degree of B-Spline
155 ! BSplineRestriction.RequiredNbSegments : Required maximum number of segments of B-Spline
156 ! BSplineRestriction.PreferDegree : Preference between requirement to degree and maximum number of segments, true/false
157 ! BSplineRestriction.RationalToPolynomial: Mode of conversion of rational B-Spline to polynomial, yes/no
158 ! BSplineRestriction.MaxDegree : Maximum allowed degree of B-Spline
159 ! BSplineRestriction.MaxNbSegments : Maximum allowed number of segments in a B-Spline
161 ! DirectFaces : Conversion of elementary surface in left-handed coordinate system into right-handed
164 ! ElementaryToRevolution : Conversion of elementary revolutive surface into general surface of revolution
167 ! SameParameter : Conversion of edge to be SameRange and SameParameter
168 ! SameParameter.Force : Mode of forced invoking, true/false
169 ! SameParameter.Tolerance3d : 3D tolerance
171 ! SplitAngle : Split revolutive surface (elementary and general) into several surfaces
172 ! SplitAngle.Angle : Maximum angle of revolution, radian
174 ! SplitClosedFaces : Split faces that have seam-edge or geometrically closed on closed surface.
175 ! SplitClosedFaces.NbSplitPoints : Number of cuttings (number of resulting faces will be NbSplitPoints+1)
176 ! SplitClosedFaces.CloseTolerance : Precision to define geometric closure.
178 ! SplitContinuity : Correction or split shapes to have speicified continuity
179 ! SplitContinuity.Tolerance3d : 3D tolerance for correction of geometry
180 ! SplitContinuity.SurfaceContinuity : Required continuity for surfaces
181 ! SplitContinuity.CurveContinuity : Required continuity for curves
183 ! ToBezier : Conversion of geometry into Bezier
184 ! ToBezier.SurfaceMode : Mode of conversion of surfaces, yes/no
185 ! ToBezier.PlaneMode : Mode of conversion of Planes,yes/no. This mode acts if SurfaceMode is yes.
186 ! ToBezier.RevolutionMode : Mode of conversion of Surfaces of Revolution (generatrix to bezier), yes/no.
187 ! This mode acts if SurfaceMode is yes.
188 ! ToBezier.ExtrusionMode : Mode of conversion of Surfaces of Extrusion (whole surface not only generatrix), yes/no.
189 ! This mode acts if SurfaceMode is yes.
190 ! ToBezier.BSplineMode : Mode of conversion of BSpline Surfaces, yes/no. This mode acts if SurfaceMode is yes.
191 ! ToBezier.EdgeMode : Mode of translation edges (0- Free,1 - Shared,2- Both)
192 ! : .Default - Free. Acts on translation curves 3d .
193 | : If it is 0 (Free) that only free edges are taken into
194 ! : account for translation 3d curves,
195 ! : if it is 1 (Shared) that only shared edges are taken into
196 ! : account for translation 3d curves,
197 ! : if it is 2 (Both) that all edges are taken into
198 ! : account for translation 3d curves,
199 ! ToBezier.Curve3dMode : Mode of conversion 3D curves, yes/no
200 ! ToBezier.Curve2dMode : Mode of conversion 2D curves, yes/no
201 ! ToBezier.Line3dMode : Mode of conversion 3D lines, yes/no
202 ! ToBezier.Circle3dMode : Mode of conversion 3D circles, yes/no
203 ! ToBezier.Conic3dMode : Mode of conversion 3D conics, yes/no
204 ! ToBezier.MinCurveLength : Min length of created curves 3d.( default 0.05)
207 ! FixFaceSize : Removing small faces
208 ! FixFaceSize.Tolerance : Tolerance in 3d
210 ! DropSmallEdges : Eliminate small edges by removing or merging with neighbour
211 ! DropSmallEdges.Tolerance3d : Tolerance (3d)
213 ! FixShape.Tolerance3d : Tolerance (3d) for fixing of shape.
214 ! FixShape.MaxTolerance3d : Maximal possible value of increasing of tolerance during fixing.
215 ! FixShape.MinTolerance3d : Minimal value of tolerance.
216 ! FixShape.FixFreeShellMode : Mode for fixing free shells in the shape (default - -1, yes - 1 , no - 0).
217 ! FixShape.FixFreeFaceMode : Mode for fixing free faces in the shape (default - -1, yes - 1 , no - 0).
218 ! FixShape.FixFreeWireMode : Mode for fixing free wires in the shape (default - -1, yes - 1 , no - 0).
219 ! FixShape.FixSameParameterMode : Mode for fixing same parameter on the whole shape (default - -1, yes - 1 , no - 0).
220 ! FixShape.FixSolidMode : Mode for fixing solids (default - -1, yes - 1 , no - 0).
221 ! FixShape.FixShellMode : Mode for fixing shells (default - -1, yes - 1 , no - 0).
222 ! FixShape.FixFaceMode : Mode for fixing faces (default - -1, yes - 1 , no - 0).
223 ! FixShape.FixWireMode : Mode for fixing wires (default - -1, yes - 1 , no - 0).
224 ! FixShape.FixOrientationMode : Mode for fixing face orientation (default - -1, yes - 1 , no - 0).
225 ! FixShape.FixMissingSeamMode : Mode for fixing face missing seam (default - -1, yes - 1 , no - 0).
226 ! FixShape.FixSmallAreaWireMode : Mode for fixing small area wires (default - -1, yes - 1 , no - 0).
227 ! FixShape.ModifyTopologyMode : Mode allowing of modifing of topology (default - 0, yes - 1 , no - 0).
228 ! FixShape.ModifyGeometryMode : Mode allowing of modifing of geometry (default - 1, yes - 1 , no - 0).
229 ! FixShape.ClosedWireMode : Mode defining whether the wire is to be closed. (default - 1, yes - 1 , no - 0).
230 ! FixShape.PreferencePCurveMode : Mode defining of preference of 2d representation (default - 1, yes - 1 , no - 0).
231 ! FixShape.FixReorderMode : Mode for fixing of order of the edges in the wire (default - -1, yes - 1 , no - 0).
232 ! FixShape.FixSmallMode : Mode for removing of the small edges from the wire in the case when
233 ! : ModifyTopologyMode equaled "yes" (default - -1, yes - 1 , no - 0).
234 ! FixShape.FixConnectedMode : Mode for fixing of connecting of edges in the wire(default - -1, yes - 1 , no - 0).
235 ! FixShape.FixEdgeCurvesMode : Moge for fixing each edge from the wire (default - -1, yes - 1 , no - 0).
236 ! FixShape.FixDegeneratedMode : Moge for fixing cases of degenerate pcurve (default - -1, yes - 1 , no - 0).
237 ! FixShape.FixLackingMode : Moge for fixing cases of lacking edge (default - -1, yes - 1 , no - 0).
238 ! FixShape.FixSelfIntersectionMode : Mode for fixing of cases self-intersection of wire (default - -1, yes - 1 , no - 0).
239 ! FixShape.FixReversed2dMode : Mode for fixing cases when pcurve is opposite curve3d (default - -1, yes - 1 , no - 0).
240 ! FixShape.FixRemovePCurveMode : Mode for removing of pcurves from edges (default - -1, yes - 1 , no - 0).
241 ! FixShape.FixRemoveCurve3dMode : Mode for removing of 3d curves from edges (default - -1, yes - 1 , no - 0).
242 ! FixShape.FixAddPCurveMode : Mode for adding pcurves of the edges if missing (default - -1, yes - 1 , no - 0).
243 ! FixShape.FixAddCurve3dMode : Mode for adding curves 3d of the edges if missing (default - -1, yes - 1 , no - 0).
244 ! FixShape.FixSeamMode : Mode for fixing cases of seam edges.
245 ! FixShape.FixShiftedMode : Mode for fixing cases when pcurves can be shifted on period on the closed surface
246 ! (default - -1, yes - 1 , no - 0).
247 ! FixShape.FixEdgeSameParameterMode : Mode for fixing same parameter for each edge (default - -1, yes - 1 , no - 0).
248 ! FixShape.FixSelfIntersectingEdgeMode : Mode for fixing cases self-intrsection edge (default - -1, yes - 1 , no - 0).
249 ! FixShape.FixIntersectingEdgesMode : Mode for fixing intersection adjacent edges.
250 ! FixShape.FixNonAdjacentIntersectingEdgesMode : Mode for fixing intersection non-adjacent edges.
