1 // Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
3 // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
4 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
6 // This library is free software; you can redistribute it and/or
7 // modify it under the terms of the GNU Lesser General Public
8 // License as published by the Free Software Foundation; either
9 // version 2.1 of the License.
11 // This library is distributed in the hope that it will be useful,
12 // but WITHOUT ANY WARRANTY; without even the implied warranty of
13 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 // Lesser General Public License for more details.
16 // You should have received a copy of the GNU Lesser General Public
17 // License along with this library; if not, write to the Free Software
18 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
22 // File : GEOM_Gen.idl
23 // Author : Sergey RUIN
28 #include "SALOME_Exception.idl"
29 #include "SALOME_Component.idl"
30 #include "SALOMEDS.idl"
31 #include "SALOMEDS_Attributes.idl"
33 #include "SALOME_GenericObj.idl"
38 * \brief Topological types of shapes (like Open Cascade types)
44 /*! A collection of solids */
46 /*! A part of 3D space bound by a shell */
48 /*! A collection of faces connected by some edges of their wire boundaries */
50 /*! Part of a plane (in 2D geometry) or a surface (in 3D geometry) bounded by a close wire */
52 /*! A sequence of edges connected by their vertices */
54 /*! Edge, a shape corresponding to a curve, and bound by a vertex at each extremity */
56 /*! A zero-dimensional shape corresponding to a point in geometry */
64 enum marker_type { MT_NONE, MT_POINT, MT_PLUS, MT_STAR, MT_O, MT_X, MT_O_POINT, MT_O_PLUS,
65 MT_O_STAR, MT_O_X, MT_BALL, MT_RING1, MT_RING2, MT_RING3, MT_USER };
70 enum marker_size { MS_NONE, MS_10, MS_15, MS_20, MS_25, MS_30, MS_35,
71 MS_40, MS_45, MS_50, MS_55, MS_60, MS_65, MS_70 };
74 * \brief State of shape relatively geometrical surface like plane, sphere or cylinder.
76 * Is used in functions GEOM_IShapesOperations.GetShapesOn<xxx>()
80 /*! Shape is on surface */
84 * Shape is in the direction defined by the normal and not on surface.
85 * For plane it means above the plane,
86 * For sphere and cylinder it means outside of volume, bounded by the surface.
91 * Shape is in the direction defined by the normal and on surface.
97 * Complementary to ONOUT.
98 * For plane it means below the plane,
99 * For sphere and cylinder it means inside the volume, bounded by the surface
100 * (beyond axis and surface for cylinder and beyond cented and surface for sphere).
105 * Complementary to OUT.
112 * \brief Kind of method to find inside one main shape some sub-shapes,
113 * corresponding to other given shape (its argument)
115 * Is used in functions GEOM_Gen.RestoreSubShapesO(), GEOM_Gen.RestoreSubShapesSO()
117 enum find_shape_method
119 /*! Use GetInPlace functionality. Suits all cases, except transformations */
122 /*! To be used only for transformation result, to find sub-shapes of argument.
123 * Only this method can be used after transformation.
127 /*! To find only shared sub-shapes, not modified by the operation */
130 /*! Use GetShapesOnShape method (can work only on solids) */
131 FSM_GetShapesOnShape,
133 /*! Use GetInPlaceByHistory method (can work only after Partition) */
134 FSM_GetInPlaceByHistory,
136 /*! To be used only for multi-transformation result.
137 * Only this method can be used after multi-transformation.
143 * \brief Kind of method to perform filling operation
145 * Is used in functions GEOM_I3DPrimOperations.MakeFilling()
147 enum filling_oper_method
149 /*! Default (standard behaviour) */
152 /*! Use edges orientation - orientation of edges is used: if the edge is
153 * reversed, the curve from this edge is reversed before using it in
154 * the filling algorithm.
158 /*! Auto-correct edges orientation - changes the orientation of the curves
159 * using minimization of sum of distances between the end points of the edges.
165 * \brief Kind of the curves.
167 * Used in the functions GEOM_ICurvesOperations.MakeCurveParametric(), GEOM_ICurvesOperations.MakeCurveParametricNew()
170 /*! Polyline curve */
176 /*! Interpolation, curve */
181 * \brief Pattern for block division of the disk
183 * Used in the functions GEOM_IAdvancedOperations.MakeDividedDisk(), GEOM_ICurvesOperations.MakeDividedDiskPntVecR()
194 typedef sequence<string> string_array;
195 typedef sequence<short> short_array;
196 typedef sequence<boolean> ListOfBool;
197 typedef sequence<long> ListOfLong;
198 typedef sequence<double> ListOfDouble;
200 interface GEOM_Object;
202 typedef sequence<GEOM_Object> ListOfGO;
206 * \brief Interface of geometric object
208 interface GEOM_Object : SALOME::GenericObj
212 * \brief Get internal (unique) entry of the object in the GEOM component's data tree.
213 * \note This is not an entry of the data object in SALOME study.
214 * This is internal function of GEOM component, though it can be used outside it for
215 appropriate reason (e.g. for unique identification of geometry object).
220 * \brief Get ID of study, where the object is created.
225 * \brief Get internal type of the object (POINT, BOX, CYLINDER, EXTRUSION...).
230 * \brief Get a <VAR>shape_type</VAR> of the object value.
232 shape_type GetShapeType();
235 * \brief Get the topology type of the object value.
237 * In contrast to the shape type, this function returns type of the most
238 * top-level sub-shape of the COMPOUND or COMPSOLID, if there is only one
242 shape_type GetTopologyType();
245 * \brief Get a minimal type of the top-level shapes contained in the object.
247 * This function is useful for the compounds only; for simple shapes it
248 * exactly the same value as GetShapeType().
249 * Note, that compounds are procesed recursively.
251 * \sa GetShapeType(), GetTopologyType(), GetMaxShapeType()
253 shape_type GetMinShapeType();
256 * \brief Get a maximal type of the top-level shapes contained in the object.
258 * This function is useful for the compounds only; for simple shapes it
259 * exactly the same value as GetShapeType().
260 * Note, that compounds are procesed recursively.
262 * \sa GetShapeType(), GetTopologyType(), GetMinShapeType()
264 shape_type GetMaxShapeType();
267 * \brief Set name of the object.
269 * \param theName is a name which will be associated with this object.
271 void SetName (in string theName);
274 * \brief Get name of the object associated with this object.
279 * \brief Set color of the object.
281 * \param theColor is a color of the object.
283 void SetColor(in SALOMEDS::Color theColor);
286 * Get color of the object.
288 SALOMEDS::Color GetColor();
291 * Toggle auto color mode on the object.
292 * \param theAutoColor is a flag which toggles auto color mode.
294 void SetAutoColor(in boolean theAutoColor);
297 * \brief Get flag of object's auto color mode.
299 boolean GetAutoColor();
302 * \brief Set standard point marker for the object
303 * \param theType standard marker type
304 * \param theSize marker relative size
306 void SetMarkerStd(in marker_type theType, in marker_size theSize );
309 * \brief Set custom point marker for the object.
311 * The texture can be added by LoadTexture() or AddTexture() functions.
312 * \param theTextureId texture ID
314 void SetMarkerTexture(in long theTextureId);
317 * \brief Get type of the point marker assigned to the object
318 * \return current marker type (MT_NONE if no marker is set)
320 marker_type GetMarkerType();
323 * \brief Get size of the point marker assigned to the object
324 * \return current marker relative size (MS_NONE if no marker is set)
326 marker_size GetMarkerSize();
329 * \brief Get texture idenifier of the point marker assigned to the object
330 * \return marker texture ID (0 if no marker set)
332 long GetMarkerTexture();
335 * \brief Set a Study entry where this object was published.
337 void SetStudyEntry (in string theEntry);
340 * \brief Get a Study entry where this object was published.
342 string GetStudyEntry();
345 * \brief Get a list of all GEOM_Object on which were the arguments
346 * when this object was constructed and modified.
347 * \note This method is supposed to be used by GUI only.
349 ListOfGO GetDependency();
352 * \brief Get a list of GEOM_Object on which the last function that created or modified the object depends.
353 * \note This method is supposed to be used by GUI only.
355 ListOfGO GetLastDependency();
358 * \brief Get the TopoDS_Shape, for colocated case only.
360 long long getShape();
362 // ######################################################################
363 // # Internal methods (For sub-shape identification)
364 // ######################################################################
366 * \brief Get geometric shape of the object as a byte stream in BRep format
367 * \note GEOM_IInsertOperations::RestoreShape() method can be used to restore shape from a BRep stream.
369 SALOMEDS::TMPFile GetShapeStream();
372 * \brief Returns True if this object is not a sub-shape of another object.
374 boolean IsMainShape();
377 * \brief Get a list of ID's of sub-shapes in the main shape.
378 * \note Internal method, suppopsed to be used only by GEOM_Client
380 ListOfLong GetSubShapeIndices();
383 * \brief Get a main shape object to which this object is a sub-shape
384 * \note Internal method, suppopsed to be used only by GEOM_Client
386 GEOM_Object GetMainShape();
389 * \brief Return true if geom object representes a shape.
391 * For example, method return false for GEOM_MARKER
396 * \brief Return true if passed object is identical to this object
398 * \param other object being compared with this one
400 boolean IsSame(in GEOM_Object other);
403 * Set list of parameters
404 * \param theParameters is a string containing the notebook variables separated by ":" symbol,
405 * used for object creation
407 void SetParameters (in string theParameters);
410 * \brief Return list of notebook variables used for object creation separated by ":" symbol
412 string GetParameters();
415 // # GEOM_IOperations:
417 * \brief Basic methods of all geometric operations
419 interface GEOM_IOperations : SALOME::GenericObj
422 * \brief To know, if the operation was successfully performed
427 * \brief Set the operation error code
428 * \param theErrorID is a string describing the error occured
429 * \note This method is supposed to be used only by interfaces inheriting from IOperations.
431 void SetErrorCode (in string theErrorID);
434 * \brief Get the operation error code
436 string GetErrorCode();
439 * \brief Get ID of study, where the operation is defined
444 * \brief Opens a new transaction
446 void StartOperation();
449 * \brief Closes the previously opened trasaction
451 void FinishOperation();
454 * \brief Aborts the previously opened transaction
456 void AbortOperation();
458 //# GEOM_IBasicOperations:
460 * \brief Interface for basic geometry creation
462 * (Point, Vector, Plane, Marker)
464 interface GEOM_IBasicOperations : GEOM_IOperations
467 * \brief Create point by three coordinates.
468 * \param theX The X coordinate of the point.
469 * \param theY The Y coordinate of the point.
470 * \param theZ The Z coordinate of the point.
471 * \return New GEOM_Object, containing the created point.
473 GEOM_Object MakePointXYZ (in double theX, in double theY, in double theZ);
476 * \brief Create a point, distant from the referenced point
477 * on the given distances along the coordinate axes.
478 * \param theReference The referenced point.
479 * \param theX Displacement from the referenced point along OX axis.
480 * \param theY Displacement from the referenced point along OY axis.
481 * \param theZ Displacement from the referenced point along OZ axis.
482 * \return New GEOM_Object, containing the created point.
484 GEOM_Object MakePointWithReference (in GEOM_Object theReference,
485 in double theX, in double theY, in double theZ);
488 * Create a point, corresponding to the given parameter on the given curve.
489 * \param theRefCurve The referenced curve.
490 * \param theParameter Value of parameter on the referenced curve.
491 * \return New GEOM_Object, containing the created point.
493 GEOM_Object MakePointOnCurve (in GEOM_Object theRefCurve,
494 in double theParameter);
497 * \brief Create a point, corresponding to the given length on the given curve.
498 * \param theRefCurve The referenced curve.
499 * \param theLength Length on the referenced curve. It can be negative.
500 * \param theStartPoint Any vertex close to one of edge's
501 * ends to select start point among them.
502 * If NULL, fist vertex is used.
503 * \return New GEOM_Object, containing the created point.
505 GEOM_Object MakePointOnCurveByLength (in GEOM_Object theRefCurve,
507 in GEOM_Object theStartPoint);
510 * \brief Create a point on the given curve, projecting given point
511 * \param theRefCurve The referenced curve.
512 * \param theXParameter X co-ordinate of point to project on curve
513 * \param theYParameter Y co-ordinate of point to project on curve
514 * \param theZParameter Z co-ordinate of point to project on curve
515 * \return New GEOM_Object, containing the created point.
517 GEOM_Object MakePointOnCurveByCoord (in GEOM_Object theRefCurve,
518 in double theXParameter,
519 in double theYParameter,
520 in double theZParameter);
523 * \brief Create a point, corresponding to the given parameters on the
525 * \param theRefSurf The referenced surface.
526 * \param theUParameter Value of U-parameter on the referenced surface.
527 * \param theVParameter Value of V-parameter on the referenced surface.
528 * \return New GEOM_Object, containing the created point.
530 GEOM_Object MakePointOnSurface (in GEOM_Object theRefSurf,
531 in double theUParameter,
532 in double theVParameter);
535 * \brief Create a point on the given surface, projecting given point
536 * \param theRefSurf The referenced surface.
537 * \param theXParameter X co-ordinate of point to project on curve
538 * \param theYParameter Y co-ordinate of point to project on curve
539 * \param theZParameter Z co-ordinate of point to project on curve
540 * \return New GEOM_Object, containing the created point.
542 GEOM_Object MakePointOnSurfaceByCoord (in GEOM_Object theRefSurf,
543 in double theXParameter,
544 in double theYParameter,
545 in double theZParameter);
548 * \brief Create a point, which lays on the given face.
549 * The point will lay in arbitrary place of the face.
550 * The only condition on it is a non-zero distance to the face boundary.
551 * Such point can be used to uniquely identify the face inside any
552 * shape in case, when the shape does not contain overlapped faces.
553 * \param theFace The referenced face.
554 * \return New GEOM_Object, containing the created point.
556 GEOM_Object MakePointOnFace (in GEOM_Object theFace);
559 * \brief Create a point, on two lines intersection.
560 * \param theRefLine1, theRefLine2 The referenced lines.
561 * \return New GEOM_Object, containing the created point.
563 GEOM_Object MakePointOnLinesIntersection (in GEOM_Object theRefLine1,
564 in GEOM_Object theRefLine2);
567 * \brief Create a vector, corresponding to tangent to the given parameter on the given curve.
568 * \param theRefCurve The referenced curve.
569 * \param theParameter Value of parameter on the referenced curve.This value should be have value
570 * between 0. and 1.. Value of 0. corresponds first parameter of curve; value
571 * 1. corresponds last parameter of curve.
572 * \return New GEOM_Object, containing the created point.
574 GEOM_Object MakeTangentOnCurve (in GEOM_Object theRefCurve,
575 in double theParameter);
578 * \brief Create a vector with the given components.
579 * \param theDX X component of the vector.
580 * \param theDY Y component of the vector.
581 * \param theDZ Z component of the vector.
582 * \return New GEOM_Object, containing the created vector.
584 GEOM_Object MakeVectorDXDYDZ (in double theDX,
589 * \brief Create a vector between two points.
590 * \param thePnt1 Start point for the vector.
591 * \param thePnt2 End point for the vector.
592 * \return New GEOM_Object, containing the created vector.
594 GEOM_Object MakeVectorTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
597 * C\brief reate a line, passing through the given point
598 * and parrallel to the given direction
599 * \param thePnt Point. The resulting line will pass through it.
600 * \param theDir Direction. The resulting line will be parallel to it.
601 * \return New GEOM_Object, containing the created line.
603 GEOM_Object MakeLine (in GEOM_Object thePnt, in GEOM_Object theDir);
606 * \brief Create a line, passing through the given points
607 * \param thePnt1 First of two points, defining the line.
608 * \param thePnt2 Second of two points, defining the line.
609 * \return New GEOM_Object, containing the created line.
611 GEOM_Object MakeLineTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
614 * \brief Create a line, given by two faces intersection.
615 * \param theFace1 First of two faces, defining the line.
616 * \param theFace2 Second of two faces, defining the line.
617 * \return New GEOM_Object, containing the created line.
619 GEOM_Object MakeLineTwoFaces (in GEOM_Object theFace1, in GEOM_Object theFace2);
622 * \brief Create a plane, passing through the three given points
623 * \param thePnt1 First of three points, defining the plane.
624 * \param thePnt2 Second of three points, defining the plane.
625 * \param thePnt3 Fird of three points, defining the plane.
626 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
627 * \return New GEOM_Object, containing the created plane.
629 GEOM_Object MakePlaneThreePnt (in GEOM_Object thePnt1,
630 in GEOM_Object thePnt2,
631 in GEOM_Object thePnt3,
632 in double theTrimSize);
635 * \brief Create a plane, passing through the given point
636 * and normal to the given vector.
637 * \param thePnt Point, the plane has to pass through.
638 * \param theVec Vector, defining the plane normal direction.
639 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
640 * \return New GEOM_Object, containing the created plane.
642 GEOM_Object MakePlanePntVec (in GEOM_Object thePnt,
643 in GEOM_Object theVec,
644 in double theTrimSize);
647 * \brief Create a plane, similar to the existing one, but with another size of representing face.
648 * \param theFace Referenced plane or LCS(Marker).
649 * \param theTrimSize New half size of a side of quadrangle face, representing the plane.
650 * \return New GEOM_Object, containing the created plane.
652 GEOM_Object MakePlaneFace (in GEOM_Object theFace,
653 in double theTrimSize);
656 * \brief Create a plane, by two vectors.
657 * \param theVec1 Vector1, the plane has to pass through first point of this vector.
658 * \param theVec2 Vector2, defining the plane normal direction.
659 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
660 * \return New GEOM_Object, containing the created plane.
662 GEOM_Object MakePlane2Vec (in GEOM_Object theVec1,
663 in GEOM_Object theVec2,
664 in double theTrimSize);
667 * \brief Create a plane, defined by local coordinate system.
668 * \param theLCS Referenced LCS(Marker).
669 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
670 * \param theOrientation OXY, OYZ or OZX orientation = (1, 2 or 3).
671 * \return New GEOM_Object, containing the created plane.
673 GEOM_Object MakePlaneLCS (in GEOM_Object theLCS,
674 in double theTrimSize,
675 in double theOrientation);
678 * \brief Create a local coordinate system.
679 * \param theOX,theOY,theOZ Three coordinates of coordinate system origin.
680 * \param theXDX,theXDY,theXDZ Three components of OX direction
681 * \param theYDX,theYDY,theYDZ Three components of OY direction
682 * \return New GEOM_Object, containing the created coordinate system.
684 GEOM_Object MakeMarker (in double theOX , in double theOY , in double theOZ,
685 in double theXDX, in double theXDY, in double theXDZ,
686 in double theYDX, in double theYDY, in double theYDZ);
689 * \brief Create a local coordinate system from shape.
690 * \param theShape The initial shape to detect the coordinate system.
691 * \return New GEOM_Object, containing the created coordinate system.
693 GEOM_Object MakeMarkerFromShape (in GEOM_Object theShape);
696 * \brief Create a local coordinate system from point and two vectors (DX, DY).
697 * \param theOrigin Point of coordinate system origin.
698 * \param theXVec Vector of X direction.
699 * \param theYVec Vector of Y direction.
700 * \return New GEOM_Object, containing the created coordinate system.
702 GEOM_Object MakeMarkerPntTwoVec (in GEOM_Object theOrigin,
703 in GEOM_Object theXVec, in GEOM_Object theYVec);
706 * \brief Create a tangent plane to specified face in the point with specified parameters.
708 * Values of parameters should be between 0. and 1.0
709 * \param theFace - face for which tangent plane shuold be built.
710 * \param theParameterU - value of parameter by U
711 * \param theParameterV - value of parameter Vthe
712 * \param theTrimSize - defines sizes of created face
713 * \return New GEOM_Object, containing the face built on tangent plane.
715 GEOM_Object MakeTangentPlaneOnFace(in GEOM_Object theFace,
716 in double theParameterU,
717 in double theParameterV,
718 in double theTrimSize);
722 * \brief Interface for shapes transforming.
724 * Translation, rotation, scaling, mirroring, offset, projection, recomputing.
726 interface GEOM_ITransformOperations : GEOM_IOperations
729 * \brief Translate the given object along the vector, specified by its end points.
730 * \param theObject The object to be translated.
731 * \param thePoint1 Start point of translation vector.
732 * \param thePoint2 End point of translation vector.
735 GEOM_Object TranslateTwoPoints (in GEOM_Object theObject,
736 in GEOM_Object thePoint1,
737 in GEOM_Object thePoint2);
740 * \brief Translate the given object along the vector, specified
741 * by its end points, creating its copy before the translation.
742 * \param theObject The object to be translated.
743 * \param thePoint1 Start point of translation vector.
744 * \param thePoint2 End point of translation vector.
745 * \return New GEOM_Object, containing the translated object.
747 GEOM_Object TranslateTwoPointsCopy (in GEOM_Object theObject,
748 in GEOM_Object thePoint1,
749 in GEOM_Object thePoint2);
752 * \brief Translate the given object along the vector, specified by its components.
753 * \param theObject The object to be translated.
754 * \param theDX,theDY,theDZ Components of translation vector.
757 GEOM_Object TranslateDXDYDZ (in GEOM_Object theObject,
758 in double theDX, in double theDY, in double theDZ);
761 * \brief Translate the given object along the vector, specified
762 * by its components, creating its copy before the translation.
763 * \param theObject The object to be translated.
764 * \param theDX,theDY,theDZ Components of translation vector.
765 * \return New GEOM_Object, containing the translated object.
767 GEOM_Object TranslateDXDYDZCopy (in GEOM_Object theObject,
768 in double theDX, in double theDY, in double theDZ);
772 * \brief Translate the given object along the given vector.
773 * \param theObject The object to be translated.
774 * \param theVector Translation vector, giving both direction and distance.
777 GEOM_Object TranslateVector (in GEOM_Object theObject,
778 in GEOM_Object theVector);
781 * \brief Translate the given object along the given vector,
782 * creating its copy before the translation.
783 * \param theObject The object to be translated.
784 * \param theVector Translation vector, giving both direction and distance.
785 * \return New GEOM_Object, containing the translated object.
787 GEOM_Object TranslateVectorCopy (in GEOM_Object theObject,
788 in GEOM_Object theVector);
791 * \brief Translate the given object along the given vector on given distance,
792 * creating its copy before the translation.
793 * \param theObject The object to be translated.
794 * \param theVector Translation vector, giving a direction.
795 * \param theDistance Translation distance, giving a distance.
796 * \param theCopy Translation copy, creating its copy if true.
797 * \return New GEOM_Object, containing the translated object.
799 GEOM_Object TranslateVectorDistance (in GEOM_Object theObject,
800 in GEOM_Object theVector,
801 in double theDistance,
805 * \brief Translate the given object along the given vector a given number times
806 * \param theObject The object to be translated.
807 * \param theVector Direction of the translation. DX if None.
808 * \param theStep Distance to translate on.
809 * \param theNbTimes Quantity of translations to be done.
810 * \return New GEOM_Object, containing compound of all
811 * the shapes, obtained after each translation.
813 GEOM_Object MultiTranslate1D (in GEOM_Object theObject,
814 in GEOM_Object theVector,
819 * \brief Conseqently apply two specified translations to theObject specified number of times.
820 * \param theObject The object to be translated.
821 * \param theVector1 Direction of the first translation. DX if None.
822 * \param theStep1 Step of the first translation.
823 * \param theNbTimes1 Quantity of translations to be done along theVector1.
824 * \param theVector2 Direction of the second translation. DY if None.
825 * \param theStep2 Step of the second translation.
826 * \param theNbTimes2 Quantity of translations to be done along theVector2.
827 * \return New GEOM_Object, containing compound of all
828 * the shapes, obtained after each translation.
830 GEOM_Object MultiTranslate2D (in GEOM_Object theObject,
831 in GEOM_Object theVector1,
834 in GEOM_Object theVector2,
836 in long theNbTimes2);
839 * \brief Rotate given object around vector perpendicular to plane containing three points.
840 * \param theObject The object to be rotated.
841 * \param theCentPoint central point - the axis is the vector perpendicular to the plane
842 * containing the three points.
843 * \param thePoint1,thePoint2 - in a perpendicular plan of the axis.
846 GEOM_Object RotateThreePoints (in GEOM_Object theObject,
847 in GEOM_Object theCentPoint,
848 in GEOM_Object thePoint1,
849 in GEOM_Object thePoint2);
853 * \brief Rotate given object around vector perpendicular to plane containing three points.
855 * Creating its copy before the rotatation.
856 * \param theObject The object to be rotated.
857 * \param theCentPoint central point - the axis is the vector perpendicular to the plane
858 * containing the three points.
859 * \param thePoint1,thePoint2 - in a perpendicular plan of the axis.
860 * \return New GEOM_Object, containing the rotated object.
862 GEOM_Object RotateThreePointsCopy (in GEOM_Object theObject,
863 in GEOM_Object theCentPoint,
864 in GEOM_Object thePoint1,
865 in GEOM_Object thePoint2);
868 * \brief Rotate the given object around the given axis on the given angle.
869 * \param theObject The object to be rotated.
870 * \param theAxis Rotation axis.
871 * \param theAngle Rotation angle in radians.
874 GEOM_Object Rotate (in GEOM_Object theObject,
875 in GEOM_Object theAxis,
880 * Rotate the given object around the given axis
881 * on the given angle, creating its copy before the rotatation.
882 * \param theObject The object to be rotated.
883 * \param theAxis Rotation axis.
884 * \param theAngle Rotation angle in radians.
885 * \return New GEOM_Object, containing the rotated object.
887 GEOM_Object RotateCopy (in GEOM_Object theObject,
888 in GEOM_Object theAxis,
892 * \brief Rotate the given object around the given axis a given number times.
894 * Rotation angle will be 2*PI/theNbObjects.
895 * \param theObject The object to be rotated.
896 * \param theAxis The rotation axis. DZ if None.
897 * \param theNbObjects Quantity of rotations to be done.
898 * \return New GEOM_Object, containing compound of all the
899 * shapes, obtained after each rotation.
901 GEOM_Object MultiRotate1D (in GEOM_Object theObject,
902 in GEOM_Object theAxis,
903 in long theNbObjects);
906 * \brief Rotate the given object around the given axis
907 * a given number times on the given angle.
909 * \param theObject The object to be rotated.
910 * \param theAxis The rotation axis. DZ if None.
911 * \param theAngleStep Rotation angle in radians.
912 * \param theNbSteps Quantity of rotations to be done.
913 * \return New GEOM_Object, containing compound of all the
914 * shapes, obtained after each rotation.
916 GEOM_Object MultiRotate1DByStep (in GEOM_Object theObject,
917 in GEOM_Object theAxis,
918 in double theAngleStep,
922 * \brief Rotate the given object around the given axis
923 * a given number times and multi-translate each rotation result.
925 * Rotation angle will be 2*PI/theNbObjects.
926 * Translation direction passes through center of gravity
927 * of rotated shape and its projection on the rotation axis.
928 * \param theObject The object to be rotated.
929 * \param theAxis Rotation axis. DZ if None.
930 * \param theNbObjects Quantity of rotations to be done.
931 * \param theRadialStep Translation distance.
932 * \param theNbSteps Quantity of translations to be done.
933 * \return New GEOM_Object, containing compound of all the
934 * shapes, obtained after each transformation.
936 GEOM_Object MultiRotate2DNbTimes (in GEOM_Object theObject,
937 in GEOM_Object theAxis,
938 in long theNbObjects,
939 in double theRadialStep,
943 * \brief Rotate the given object around the
944 * given axis on the given angle a given number
945 * times and multi-translate each rotation result.
947 * Translation direction passes through center of gravity
948 * of rotated shape and its projection on the rotation axis.
949 * \param theObject The object to be rotated.
950 * \param theAxis Rotation axis. DZ if None.
951 * \param theAngleStep Rotation angle in radians.
952 * \param theNbSteps1 Quantity of rotations to be done.
953 * \param theRadialStep Translation distance.
954 * \param theNbSteps2 Quantity of translations to be done.
955 * \return New GEOM_Object, containing compound of all the
956 * shapes, obtained after each transformation.
958 GEOM_Object MultiRotate2DByStep (in GEOM_Object theObject,
959 in GEOM_Object theAxis,
960 in double theAngleStep,
962 in double theRadialStep,
963 in long theNbSteps2);
966 * \brief Rotate the given object around the
967 * given axis on the given angle a given number
968 * times and multi-translate each rotation result.
970 * Translation direction passes through center of gravity
971 * of rotated shape and its projection on the rotation axis.
972 * \param theObject The object to be rotated.
973 * \param theAxis Rotation axis. DZ if None.
974 * \param theAngleStep Rotation angle in degrees.
975 * \param theNbSteps1 Quantity of rotations to be done.
976 * \param theRadialStep Translation distance.
977 * \param theNbSteps2 Quantity of translations to be done.
978 * \return New GEOM_Object, containing compound of all the
979 * shapes, obtained after each transformation.
981 GEOM_Object MultiRotate2D (in GEOM_Object theObject,
982 in GEOM_Object theAxis,
983 in double theAngleStep,
985 in double theRadialStep,
986 in long theNbSteps2);
989 * \brief Replace the given object by an object,
990 * symmetrical to it relatively the given plane.
991 * \param theObject The object to be mirrored.
992 * \param thePlane Plane of symmetry.
994 GEOM_Object MirrorPlane (in GEOM_Object theObject, in GEOM_Object thePlane);
997 * \brief Create an object, symmetrical
998 * to the given one relatively the given plane.
999 * \param theObject The object to be mirrored.
1000 * \param thePlane Plane of symmetry.
1001 * \return New GEOM_Object, containing the mirrored shape.
1003 GEOM_Object MirrorPlaneCopy (in GEOM_Object theObject, in GEOM_Object thePlane);
1006 * \brief Replace the given object by an object,
1007 * symmetrical to it relatively the given axis.
1008 * \param theObject The object to be mirrored.
1009 * \param theAxis Axis of symmetry.
1010 * \return theObject.
1012 GEOM_Object MirrorAxis (in GEOM_Object theObject, in GEOM_Object theAxis);
1015 * \brief Create an object, symmetrical
1016 * to the given one relatively the given axis.
1017 * \param theObject The object to be mirrored.
1018 * \param theAxis Axis of symmetry.
1019 * \return New GEOM_Object, containing the mirrored object.
1021 GEOM_Object MirrorAxisCopy (in GEOM_Object theObject, in GEOM_Object theAxis);
1024 * \brief Replace the given object by an object, symmetrical to it relatively the given point.
1025 * \param theObject The object to be mirrored.
1026 * \param thePoint Point of symmetry.
1027 * \return theObject.
1029 GEOM_Object MirrorPoint (in GEOM_Object theObject, in GEOM_Object thePoint);
1032 * \brief Create an object, symmetrical to the given one relatively the given point.
1033 * \param theObject The object to be mirrored.
1034 * \param thePoint Point of symmetry.
1035 * \return New GEOM_Object, containing the mirrored object.
1037 GEOM_Object MirrorPointCopy (in GEOM_Object theObject, in GEOM_Object thePoint);
1040 * \brief Replace the given object by its offset.
1041 * \param theObject The base object for the offset.
1042 * \param theOffset Offset value.
1043 * \return theObject.
1045 GEOM_Object OffsetShape (in GEOM_Object theObject, in double theOffset);
1048 * \brief Create new object as offset of the given one.
1049 * \param theObject The base object for the offset.
1050 * \param theOffset Offset value.
1051 * \return New GEOM_Object, containing the offset object.
1053 GEOM_Object OffsetShapeCopy (in GEOM_Object theObject, in double theOffset);
1056 * \brief Create new object as projection of the given one on a 2D surface.
1057 * \param theSource The source object for the projection. It can be a point, edge or wire.
1058 * \param theTarget The target object. It can be planar or cylindrical face.
1059 * \return New GEOM_Object, containing the projection.
1061 GEOM_Object ProjectShapeCopy (in GEOM_Object theSource, in GEOM_Object theTarget);
1064 * \brief Scale the given object by the factor.
1065 * \param theObject The object to be scaled.
1066 * \param thePoint Center point for scaling.
1067 * \param theFactor Scaling factor value.
1068 * \return theObject.
1070 GEOM_Object ScaleShape (in GEOM_Object theObject, in GEOM_Object thePoint,
1071 in double theFactor);
1074 * \brief Scale the given object by the factor, creating its copy before the scaling.
1075 * \param theObject The object to be scaled.
1076 * \param thePoint Center point for scaling.
1077 * \param theFactor Scaling factor value.
1078 * \return New GEOM_Object, containing the scaled shape.
1080 GEOM_Object ScaleShapeCopy (in GEOM_Object theObject, in GEOM_Object thePoint,
1081 in double theFactor);
1084 * \brief Scale the given object by different factors along coordinate axes.
1085 * \param theObject The object to be scaled.
1086 * \param thePoint Center point for scaling.
1087 * \param theFactorX,theFactorY,theFactorZ Scaling factors along each axis.
1088 * \return theObject.
1090 GEOM_Object ScaleShapeAlongAxes (in GEOM_Object theObject,
1091 in GEOM_Object thePoint,
1092 in double theFactorX,
1093 in double theFactorY,
1094 in double theFactorZ);
1097 * \brief Scale the given object by different factors along coordinate axes,
1098 * creating its copy before the scaling.
1099 * \param theObject The object to be scaled.
1100 * \param thePoint Center point for scaling.
1101 * \param theFactorX,theFactorY,theFactorZ Scaling factors along each axis.
1102 * \return New GEOM_Object, containing the scaled shape.
1104 GEOM_Object ScaleShapeAlongAxesCopy (in GEOM_Object theObject,
1105 in GEOM_Object thePoint,
1106 in double theFactorX,
1107 in double theFactorY,
1108 in double theFactorZ);
1111 * \brief Modify the Location of the given object by LCS.
1112 * \param theObject The object to be displaced.
1113 * \param theStartLCS Coordinate system to perform displacement from it.
1114 * If \a theStartLCS is NULL, displacement
1115 * will be performed from global CS.
1116 * If \a theObject itself is used as \a theStartLCS,
1117 * its location will be changed to \a theEndLCS.
1118 * \param theEndLCS Coordinate system to perform displacement to it.
1119 * \return theObject.
1121 GEOM_Object PositionShape (in GEOM_Object theObject,
1122 in GEOM_Object theStartLCS,
1123 in GEOM_Object theEndLCS);
1126 * \brief Modify the Location of the given object by LCS,
1127 * creating its copy before the setting.
1128 * \param theObject The object to be displaced.
1129 * \param theStartLCS Coordinate system to perform displacement from it.
1130 * If \a theStartLCS is NULL, displacement
1131 * will be performed from global CS.
1132 * If \a theObject itself is used as \a theStartLCS,
1133 * its location will be changed to \a theEndLCS.
1134 * \param theEndLCS Coordinate system to perform displacement to it.
1135 * \return New GEOM_Object, containing the displaced shape.
1137 GEOM_Object PositionShapeCopy (in GEOM_Object theObject,
1138 in GEOM_Object theStartLCS,
1139 in GEOM_Object theEndLCS);
1142 * \brief Modify the Location of the given object by Path,
1143 * \param theObject The object to be displaced.
1144 * \param thePath Wire or Edge along that the object will be translated.
1145 * \param theDistance progress of Path (0 = actual location, 1 = end of path location).
1146 * \param theCopy is a true or false parameter. true is to create a copy, false to move the object.
1147 * \param theReverse is a true or false parameter. True is to reverse
1148 * direction, false is to move normal direction.
1149 * \return New GEOM_Object, containing the displaced shape.
1151 GEOM_Object PositionAlongPath (in GEOM_Object theObject,
1152 in GEOM_Object thePath,
1153 in double theDistance,
1155 in boolean theReverse);
1158 * \brief Recompute the shape from its arguments.
1159 * \param theObject The object to be recomputed.
1160 * \return theObject.
1162 GEOM_Object RecomputeObject (in GEOM_Object theObject);
1166 * \brief Interface for 3D primitives creation
1168 * Box, Cylinder, Cone, Sphere, Prism (extrusion),
1169 * Pipe (extrusion along contour), Revolution, Solid (from shell).
1171 interface GEOM_I3DPrimOperations : GEOM_IOperations
1174 * \brief Create a box with specified dimensions along the coordinate axes
1175 * and with edges, parallel to the coordinate axes.
1177 * Center of the box will be at point (DX/2, DY/2, DZ/2).
1178 * \param theDX Length of Box edges, parallel to OX axis.
1179 * \param theDY Length of Box edges, parallel to OY axis.
1180 * \param theDZ Length of Box edges, parallel to OZ axis.
1181 * \return New GEOM_Object, containing the created box.
1183 GEOM_Object MakeBoxDXDYDZ (in double theDX, in double theDY, in double theDZ);
1186 * \brief Create a box with two specified opposite vertices,
1187 * and with edges, parallel to the coordinate axes
1188 * \param thePnt1 First of two opposite vertices.
1189 * \param thePnt2 Second of two opposite vertices.
1190 * \return New GEOM_Object, containing the created box.
1192 GEOM_Object MakeBoxTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
1195 * \brief Create a face specified dimensions along OX-OY coordinate axes,
1196 * with edges parallel to the coordinate axes.
1198 * Center of the face will be at point (0, 0, 0).
1199 * \param theH Height of the Face.
1200 * \param theW Width of the Face.
1201 * \param theOrientation Orientation belong axis OXY OYZ OZX
1202 * \return New GEOM_Object, containing the created face.
1204 GEOM_Object MakeFaceHW (in double theH, in double theW, in short theOrientation);
1206 * \brief Create a face by normale vector or edge and two specified sizes,
1207 * vertical (H) and horisontal (W).
1208 * \param theObj defines plane.
1209 * \param theH vertical size (height).
1210 * \param theW horisontal size (width).
1211 * \return New GEOM_Object, containing the created face.
1213 GEOM_Object MakeFaceObjHW (in GEOM_Object theObj, in double theH, in double theW);
1215 * \brief Create a Disk (circular face) with given center, normal vector and radius.
1216 * \param thePnt disk center.
1217 * \param theVec Vector, normal to the plane of the disk.
1218 * \param theR Disk radius.
1219 * \return New GEOM_Object, containing the created disk.
1221 GEOM_Object MakeDiskPntVecR (in GEOM_Object thePnt,
1222 in GEOM_Object theVec,
1225 * \brief Create a disk (circular face), passing through three given points
1226 * \param thePnt1, thePnt2, thePnt3 Points, defining the disk.
1227 * \return New GEOM_Object, containing the created disk.
1229 GEOM_Object MakeDiskThreePnt (in GEOM_Object thePnt1,
1230 in GEOM_Object thePnt2,
1231 in GEOM_Object thePnt3);
1234 * \brief Create a disk specified dimensions along OX-OY coordinate axes.
1236 * Center of the disk at point (0, 0, 0).
1237 * \param theR of the Disk.
1238 * \param theOrientation Orientation belong axis OXY OYZ OZX
1239 * \return New GEOM_Object, containing the created disk.
1241 GEOM_Object MakeDiskR (in double theR, in short theOrientation);
1244 * \brief Create a cylinder with given radius and height at
1245 * the origin of coordinate system.
1247 * Axis of the cylinder will be collinear to the OZ axis of the coordinate system.
1248 * \param theR Cylinder radius.
1249 * \param theH Cylinder height.
1250 * \return New GEOM_Object, containing the created cylinder.
1252 GEOM_Object MakeCylinderRH (in double theR, in double theH);
1255 * \brief Create a cylinder with given base point, axis, radius and height.
1256 * \param thePnt Central point of cylinder base.
1257 * \param theAxis Cylinder axis.
1258 * \param theR Cylinder radius.
1259 * \param theH Cylinder height.
1260 * \return New GEOM_Object, containing the created cylinder.
1262 GEOM_Object MakeCylinderPntVecRH (in GEOM_Object thePnt,
1263 in GEOM_Object theAxis,
1268 * \brief Create a cone with given height and radiuses at
1269 * the origin of coordinate system.
1271 * Axis of the cone will be collinear to the OZ axis of the coordinate system.
1272 * \param theR1 Radius of the first cone base.
1273 * \param theR2 Radius of the second cone base.
1274 * \note If both radiuses are non-zero, the cone will be truncated.
1275 * \note If the radiuses are equal, a cylinder will be created instead.
1276 * \param theH Cone height.
1277 * \return New GEOM_Object, containing the created cone.
1279 GEOM_Object MakeConeR1R2H (in double theR1, in double theR2, in double theH);
1282 * \brief Create a cone with given base point, axis, height and radiuses.
1283 * \param thePnt Central point of the first cone base.
1284 * \param theAxis Cone axis.
1285 * \param theR1 Radius of the first cone base.
1286 * \param theR2 Radius of the second cone base.
1287 * \note If both radiuses are non-zero, the cone will be truncated.
1288 * \note If the radiuses are equal, a cylinder will be created instead.
1289 * \param theH Cone height.
1290 * \return New GEOM_Object, containing the created cone.
1292 GEOM_Object MakeConePntVecR1R2H (in GEOM_Object thePnt,
1293 in GEOM_Object theAxis,
1299 * \brief Create a torus with given radiuses at the origin of coordinate system.
1300 * \param theRMajor Torus major radius.
1301 * \param theRMinor Torus minor radius.
1302 * \return New GEOM_Object, containing the created torus.
1304 GEOM_Object MakeTorusRR (in double theRMajor,
1305 in double theRMinor);
1308 * \brief Create a torus with given center, normal vector and radiuses.
1309 * \param thePnt Torus central point.
1310 * \param theVec Torus axis of symmetry.
1311 * \param theRMajor Torus major radius.
1312 * \param theRMinor Torus minor radius.
1313 * \return New GEOM_Object, containing the created torus.
1315 GEOM_Object MakeTorusPntVecRR (in GEOM_Object thePnt,
1316 in GEOM_Object theVec,
1317 in double theRMajor,
1318 in double theRMinor);
1321 * \brief Create a sphere with given radius at the origin of coordinate system.
1322 * \param theR Sphere radius.
1323 * \return New GEOM_Object, containing the created sphere.
1325 GEOM_Object MakeSphereR (in double theR);
1328 * \brief Create a sphere with given center and radius.
1329 * \param thePnt Sphere center.
1330 * \param theR Sphere radius.
1331 * \return New GEOM_Object, containing the created .
1333 GEOM_Object MakeSpherePntR (in GEOM_Object thePnt, in double theR);
1336 * \brief Create a shape by extrusion of the base shape along the vector
1338 * All the space, transfixed by the base shape during its translation
1339 * along the vector on the given distance.
1340 * \param theBase Base shape to be extruded.
1341 * \param theVec Direction of extrusion.
1342 * \param theH Prism dimension along theVec.
1343 * \return New GEOM_Object, containing the created prism.
1345 GEOM_Object MakePrismVecH (in GEOM_Object theBase,
1346 in GEOM_Object theVec,
1348 /* \brief The Same Prism but in 2 directions (forward&backward) */
1349 GEOM_Object MakePrismVecH2Ways (in GEOM_Object theBase,
1350 in GEOM_Object theVec,
1352 /* \brief The Same as MakePrismVecH but with scaling */
1353 GEOM_Object MakePrismVecHWithScaling (in GEOM_Object theBase,
1354 in GEOM_Object theVec,
1356 in double theScaleFactor);
1359 * \brief Create a shape by extrusion of the base shape along a vector, defined by two points.
1360 * \param theBase Base shape to be extruded.
1361 * \param thePoint1 First end of extrusion vector.
1362 * \param thePoint2 Second end of extrusion vector.
1363 * \return New GEOM_Object, containing the created prism.
1365 GEOM_Object MakePrismTwoPnt (in GEOM_Object theBase,
1366 in GEOM_Object thePoint1,
1367 in GEOM_Object thePoint2);
1368 /* \brief The same prism but in two directions forward&backward */
1369 GEOM_Object MakePrismTwoPnt2Ways (in GEOM_Object theBase,
1370 in GEOM_Object thePoint1,
1371 in GEOM_Object thePoint2);
1372 /* \brief The Same as MakePrismTwoPnt but with scaling */
1373 GEOM_Object MakePrismTwoPntWithScaling (in GEOM_Object theBase,
1374 in GEOM_Object thePoint1,
1375 in GEOM_Object thePoint2,
1376 in double theScaleFactor);
1379 * \brief Create a shape by extrusion of the base shape along a vector, defined by DX DY DZ.
1380 * \param theBase Base shape to be extruded.
1381 * \param theDX, theDY, theDZ end of extrusion vector.
1382 * \return New GEOM_Object, containing the created prism.
1384 GEOM_Object MakePrismDXDYDZ (in GEOM_Object theBase,
1385 in double theDX, in double theDY, in double theDZ);
1386 /* \brief The same prism but in two directions forward&backward */
1387 GEOM_Object MakePrismDXDYDZ2Ways (in GEOM_Object theBase,
1388 in double theDX, in double theDY, in double theDZ);
1389 /* \brief The Same as MakePrismDXDYDZ but with scaling */
1390 GEOM_Object MakePrismDXDYDZWithScaling (in GEOM_Object theBase,
1391 in double theDX, in double theDY, in double theDZ,
1392 in double theScaleFactor);
1396 * \brief Add / Remove material to / from a solid by extrusion of the base shape on the given distance.
1397 * \param theInitShape Initial shape on which to perform the feature.It has to be a solid or
1398 * a compound made of a single solid
1399 * \param theBase Edge or wire defining the base shape to be extruded.
1400 * \param theHeight Prism dimension along the normal of the face.
1401 * \param theAngle Draft angel in degrees
1402 * \param theFuse If true material is added else material is removed
1403 * \return New GEOM_Object, containing the modified shape
1405 GEOM_Object MakeDraftPrism (in GEOM_Object theInitShape,
1406 in GEOM_Object theBase,
1407 in double theHeight,
1409 in boolean theFuse);
1412 * \brief Create a shape by extrusion of the base shape along
1413 * the path shape. The path shape can be a wire or an edge.
1414 * \param theBase Base shape to be extruded.
1415 * \param thePath Path shape to extrude the base shape along it.
1416 * \return New GEOM_Object, containing the created pipe.
1418 GEOM_Object MakePipe (in GEOM_Object theBase, in GEOM_Object thePath);
1421 * \brief Create a shape by revolution of the base shape around the axis
1422 * on the given angle.
1424 * All the space, transfixed by the base
1425 * shape during its rotation around the axis on the given angle.
1426 * \param theBase Base shape to be rotated.
1427 * \param theAxis Rotation axis.
1428 * \param theAngle Rotation angle in radians.
1429 * \return New GEOM_Object, containing the created revolution.
1431 GEOM_Object MakeRevolutionAxisAngle (in GEOM_Object theBase,
1432 in GEOM_Object theAxis,
1433 in double theAngle);
1434 /* The Same Revolution but in both ways forward&backward */
1435 GEOM_Object MakeRevolutionAxisAngle2Ways (in GEOM_Object theBase,
1436 in GEOM_Object theAxis,
1437 in double theAngle);
1440 * \brief Create a filling from the given compound of contours.
1441 * \param theShape Initial shape on which to perform the feature.
1442 * \param theMinDeg a minimal degree of BSpline surface to create
1443 * \param theMaxDeg a maximal degree of BSpline surface to create
1444 * \param theTol2D a 2d tolerance to be reached
1445 * \param theTol3D a 3d tolerance to be reached
1446 * \param theNbIter a number of iteration of approximation algorithm
1447 * \param theMethod Kind of method to perform filling operation.
1448 * \param theApprox Boolean indicating if result should be approximated
1449 * \return New GEOM_Object, containing the created filling surface.
1451 GEOM_Object MakeFilling (in GEOM_Object theShape,
1452 in long theMinDeg, in long theMaxDeg,
1453 in double theTol2D, in double theTol3D,
1455 in filling_oper_method theMethod,
1456 in boolean theApprox);
1459 * \brief Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
1460 * \param theSeqSections - set of specified sections.
1461 * \param theModeSolid - mode defining building solid or shell
1462 * \param thePreci - precision 3D used for smoothing by default 1.e-6
1463 * \param theRuled - mode defining type of the result surfaces (ruled or smoothed).
1464 * \return New GEOM_Object, containing the created shell or solid.
1466 GEOM_Object MakeThruSections(in ListOfGO theSeqSections,
1467 in boolean theModeSolid,
1469 in boolean theRuled);
1472 * \brief Create a shape by extrusion of the profile shape along
1475 * The path shape can be a wire or an edge.
1476 * the several profiles can be specified in the several locations of path.
1477 * \param theSeqBases - list of Bases shape to be extruded.
1478 * \param theLocations - list of locations on the path corresponding
1479 * specified list of the Bases shapes. Number of locations
1480 * should be equal to number of bases or list of locations can be empty.
1481 * \param thePath - Path shape to extrude the base shape along it.
1482 * \param theWithContact - the mode defining that the section is translated to be in
1483 * contact with the spine.
1484 * \param theWithCorrection - defining that the section is rotated to be
1485 * orthogonal to the spine tangent in the correspondent point
1486 * \return New GEOM_Object, containing the created pipe.
1488 GEOM_Object MakePipeWithDifferentSections (in ListOfGO theSeqBases,
1489 in ListOfGO theLocations,
1490 in GEOM_Object thePath,
1491 in boolean theWithContact ,
1492 in boolean theWithCorrection );
1495 * \brief Create a shape by extrusion of the profile shape along
1498 * The path shape can be a shell or a face.
1499 * the several profiles can be specified in the several locations of path.
1500 * \param theSeqBases - list of Bases shape to be extruded.
1501 * \param theSeqSubBases - list of corresponding sub-shapes of section shapes.
1502 * \param theLocations - list of locations on the path corresponding
1503 * specified list of the Bases shapes. Number of locations
1504 * should be equal to number of bases.
1505 * \param thePath - Path shape to extrude the base shape along it.
1506 * \param theWithContact - the mode defining that the section is translated to be in
1507 * contact with the spine.
1508 * \param theWithCorrection - defining that the section is rotated to be
1509 * orthogonal to the spine tangent in the correspondent point
1510 * \return New GEOM_Object, containing the created pipe.
1512 GEOM_Object MakePipeWithShellSections (in ListOfGO theSeqBases,
1513 in ListOfGO theSeqSubBases,
1514 in ListOfGO theLocations,
1515 in GEOM_Object thePath,
1516 in boolean theWithContact ,
1517 in boolean theWithCorrection );
1520 * \brief Create solids between given sections
1521 * \param theSeqBases - list of sections (shell or face).
1522 * \param theLocations - list of corresponding vertexes
1523 * \return New GEOM_Object, containing the created solids.
1525 GEOM_Object MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
1526 in ListOfGO theLocations);
1529 * \brief Create a shape by extrusion of the base shape along
1530 * the path shape with constant bi-normal direction along the given vector.
1532 * The path shape can be a wire or an edge.
1533 * \param theBase Base shape to be extruded.
1534 * \param thePath Path shape to extrude the base shape along it.
1535 * \param theVec Vector defines a constant binormal direction to keep the
1536 * same angle beetween the Direction and the sections
1537 * along the sweep surface.
1538 * \return New GEOM_Object, containing the created pipe.
1540 GEOM_Object MakePipeBiNormalAlongVector (in GEOM_Object theBase,
1541 in GEOM_Object thePath,
1542 in GEOM_Object theVec);
1545 * \brief Build a middle path of a pipe-like shape.
1547 * The path shape can be a wire or an edge.
1548 * \param theShape It can be closed or unclosed pipe-like shell
1549 * or a pipe-like solid.
1550 * \param theBase1, theBase2 Two bases of the supposed pipe. This
1551 * should be wires or faces of \a theShape.
1552 * \note It is not assumed that exact or approximate copy of \a theShape
1553 * can be obtained by applying existing Pipe operation on the
1554 * resulting "Path" wire taking \a theBase1 as the base - it is not
1555 * always possible; though in some particular cases it might work
1556 * it is not guaranteed. Thus, RestorePath function should not be
1557 * considered as an exact reverse operation of the Pipe.
1558 * \return New GEOM_Object, containing an edge or wire that represent
1559 * source pipe's "path".
1561 GEOM_Object RestorePath (in GEOM_Object theShape,
1562 in GEOM_Object theBase1,
1563 in GEOM_Object theBase2);
1566 * \brief Build a middle path of a pipe-like shape.
1568 * The path shape can be a wire or an edge.
1569 * \param theShape It can be closed or unclosed pipe-like shell
1570 * or a pipe-like solid.
1571 * \param theBase1, theBase2 Two bases of the supposed pipe. This
1572 * should be lists of edges of \a theShape.
1573 * \note It is not assumed that exact or approximate copy of \a theShape
1574 * can be obtained by applying existing Pipe operation on the
1575 * resulting "Path" wire taking \a theBase1 as the base - it is not
1576 * always possible; though in some particular cases it might work
1577 * it is not guaranteed. Thus, RestorePath function should not be
1578 * considered as an exact reverse operation of the Pipe.
1579 * \return New GEOM_Object, containing an edge or wire that represent
1580 * source pipe's "path".
1582 GEOM_Object RestorePathEdges (in GEOM_Object theShape,
1583 in ListOfGO theBase1,
1584 in ListOfGO theBase2);
1588 * \brief Interface for Shapes creation:
1590 * Edge from two points, Wire from edges, Face from wire,
1591 * Shell from faces, Solid from shells, Compound from shapes
1593 interface GEOM_IShapesOperations : GEOM_IOperations
1596 * \brief Create a linear edge with specified ends.
1597 * \param thePnt1 Point for the first end of edge.
1598 * \param thePnt2 Point for the second end of edge.
1599 * \return New GEOM_Object, containing the created edge.
1601 GEOM_Object MakeEdge (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
1604 * \brief Create an edge on another edge, corresponding to the given length on the given edge.
1605 * \param theRefCurve The referenced edge.
1606 * \param theLength Length on the referenced edge. It can be
1607 * negative for extrapolation on base curve.
1608 * \param theStartPoint Any vertex close to one of edge's
1609 * ends to select start point among them.
1610 * If NULL, fist vertex is used.
1611 * \return New GEOM_Object, containing the created edge.
1613 GEOM_Object MakeEdgeOnCurveByLength (in GEOM_Object theRefCurve,
1614 in double theLength,
1615 in GEOM_Object theStartPoint);
1618 * \brief Create an edge from specified wire.
1619 * \param theWire source Wire.
1620 * \param theLinearTolerance linear tolerance value
1621 * \param theAngularTolerance angular tolerance value
1622 * \return New GEOM_Object, containing the created edge.
1624 GEOM_Object MakeEdgeWire (in GEOM_Object theWire,
1625 in double theLinearTolerance,
1626 in double theAngularTolerance);
1629 * \brief Create a wire from the set of edges and wires.
1630 * \param theEdgesAndWires List of edge and/or wires.
1631 * \param theTolerance Maximum distance between vertices, that will be merged.
1632 * Values less than 1e-07 are equivalent to 1e-07 (Precision::Confusion()).
1633 * \return New GEOM_Object, containing the created wire.
1635 GEOM_Object MakeWire (in ListOfGO theEdgesAndWires,
1636 in double theTolerance);
1639 * \brief Create a face on the given wire.
1640 * \param theWire closed Wire or Edge to build the face on.
1641 * \param isPlanarWanted If TRUE, only planar face will be built.
1642 * If impossible, NULL object will be returned.
1643 * \return New GEOM_Object, containing the created face.
1645 GEOM_Object MakeFace (in GEOM_Object theWire, in boolean isPlanarWanted);
1648 * \brief Create a face on the given wires set.
1649 * \param theWires List of closed wires or edges to build the face on.
1650 * \param isPlanarWanted If TRUE, only planar face will be built.
1651 * If impossible, NULL object will be returned.
1652 * \return New GEOM_Object, containing the created face.
1654 GEOM_Object MakeFaceWires (in ListOfGO theWires, in boolean isPlanarWanted);
1657 * \brief Create a shell from the set of faces and shells.
1658 * \param theFacesAndShells List of faces and/or shells.
1659 * \return New GEOM_Object, containing the created shell.
1661 GEOM_Object MakeShell (in ListOfGO theFacesAndShells);
1664 * \brief Create a solid, bounded by the given shell.
1665 * \param theShell Bounding shell.
1666 * \return New GEOM_Object, containing the created solid.
1668 GEOM_Object MakeSolidShell (in GEOM_Object theShell);
1671 * \brief Create a solid, bounded by the given shells.
1672 * \param theShells Bounding shells.
1673 * \return New GEOM_Object, containing the created solid.
1675 GEOM_Object MakeSolidShells (in ListOfGO theShells);
1678 * \brief Create a compound of the given shapes.
1679 * \param theShapes List of shapes to put in compound.
1680 * \return New GEOM_Object, containing the created compound.
1682 GEOM_Object MakeCompound (in ListOfGO theShapes);
1685 * \brief Replace coincident faces in theShape by one face.
1686 * \param theShape Initial shape.
1687 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1688 * \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
1689 * \return New GEOM_Object, containing a copy of theShape without coincident faces.
1691 GEOM_Object MakeGlueFaces (in GEOM_Object theShape, in double theTolerance, in boolean doKeepNonSolids);
1694 * Find coincident faces in theShape for possible gluing.
1695 * \param theShape Initial shape.
1696 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1699 ListOfGO GetGlueFaces (in GEOM_Object theShape, in double theTolerance);
1702 * \brief Replace coincident faces in theShape by one face
1703 * in compliance with given list of faces
1704 * \param theShape Initial shape.
1705 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1706 * \param theFaces List of faces for gluing.
1707 * \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
1708 * \param doGlueAllEdges If TRUE, all coincident edges of <VAR>theShape</VAR>
1709 * will be glued, otherwise only the edges,
1710 * belonging to <VAR>theFaces</VAR>.
1711 * \return New GEOM_Object, containing a copy of theShape without some faces.
1713 GEOM_Object MakeGlueFacesByList (in GEOM_Object theShape, in double theTolerance,
1714 in ListOfGO theFaces, in boolean doKeepNonSolids,
1715 in boolean doGlueAllEdges);
1718 * \brief Replace coincident edges in theShape by one edge.
1719 * \param theShape Initial shape.
1720 * \param theTolerance Maximum distance between edges, which can be considered as coincident.
1721 * \return New GEOM_Object, containing a copy of theShape without coincident edges.
1723 GEOM_Object MakeGlueEdges (in GEOM_Object theShape, in double theTolerance);
1726 * Find coincident edges in theShape for possible gluing.
1727 * \param theShape Initial shape.
1728 * \param theTolerance Maximum distance between edges, which can be considered as coincident.
1731 ListOfGO GetGlueEdges (in GEOM_Object theShape, in double theTolerance);
1734 * \brief Replace coincident edges in theShape by one edge
1735 * in compliance with given list of edges
1736 * \param theShape Initial shape.
1737 * \param theTolerance Maximum distance between edges, which can be considered as coincident.
1738 * \param theEdges List of edges for gluing.
1739 * \return New GEOM_Object, containing a copy of theShape without some edges.
1741 GEOM_Object MakeGlueEdgesByList (in GEOM_Object theShape,
1742 in double theTolerance,
1743 in ListOfGO theEdges);
1746 * \brief Get all sub-shapes and groups of \a theShape,
1747 * that were created already by any other methods.
1748 * \param theShape Any shape.
1749 * \param theGroupsOnly If this parameter is TRUE, only groups will be
1750 * returned, else all found sub-shapes and groups.
1751 * \return List of existing sub-objects of \a theShape.
1753 ListOfGO GetExistingSubObjects (in GEOM_Object theShape,
1754 in boolean theGroupsOnly);
1757 * \brief Deprecated method.
1759 * Use MakeAllSubShapes() instead.
1761 ListOfGO MakeExplode (in GEOM_Object theShape,
1762 in long theShapeType,
1763 in boolean isSorted);
1766 * \brief Explode a shape on sub-shapes of a given type.
1768 * If the shape itself has the given type, it is also returned.
1769 * \param theShape Shape to be exploded.
1770 * \param theShapeType Type of sub-shapes to be retrieved.
1771 * \param isSorted If this parameter is TRUE, sub-shapes will be
1772 * sorted by coordinates of their gravity centers.
1773 * \return List of sub-shapes of type theShapeType, contained in theShape.
1775 ListOfGO MakeAllSubShapes (in GEOM_Object theShape,
1776 in long theShapeType,
1777 in boolean isSorted);
1780 * \brief Extract all sub-shapes of the given type from
1781 * the given shape, excluding the shape itself.
1782 * \param theShape Shape to be exploded.
1783 * \param theShapeType Type of sub-shapes to be retrieved.
1784 * \param isSorted If this parameter is TRUE, sub-shapes will be
1785 * sorted by coordinates of their gravity centers.
1786 * \return List of sub-shapes of type theShapeType, contained in theShape.
1788 ListOfGO ExtractSubShapes (in GEOM_Object theShape,
1789 in long theShapeType,
1790 in boolean isSorted);
1793 * \brief Deprecated method. Use GetAllSubShapesIDs() instead.
1795 ListOfLong SubShapeAllIDs (in GEOM_Object theShape,
1796 in long theShapeType,
1797 in boolean isSorted);
1800 * \brief Explode a shape on sub-shapes of a given type.
1802 * Does the same, as MakeAllSubShapes, but returns IDs of
1803 * sub-shapes, not GEOM_Object. It works faster.
1804 * \param theShape Shape to be exploded.
1805 * \param theShapeType Type of sub-shapes to be retrieved.
1806 * \param isSorted If this parameter is TRUE, sub-shapes will be
1807 * sorted by coordinates of their gravity centers.
1808 * \return List of IDs of sub-shapes of type theShapeType, contained in theShape.
1810 ListOfLong GetAllSubShapesIDs (in GEOM_Object theShape,
1811 in long theShapeType,
1812 in boolean isSorted);
1815 * \brief Get a sub-shape defined by its unique ID inside \a theMainShape
1816 * \param theMainShape Main shape.
1817 * \param theID Unique ID of sub-shape inside \a theMainShape.
1818 * \return GEOM_Object, corresponding to found sub-shape.
1819 * \note The sub-shape GEOM_Object can has ONLY ONE function.
1820 * Don't try to apply modification operations (without copy) on them.
1822 GEOM_Object GetSubShape (in GEOM_Object theMainShape,
1826 * \brief Get a set of sub-shapes defined by their unique IDs inside \a theMainShape
1827 * \param theMainShape Main shape.
1828 * \param theIndices List of unique IDs of sub-shapes inside \a theMainShape.
1829 * \return List of GEOM_Object, corresponding to found sub-shapes.
1830 * \note The sub-shape GEOM_Object can has ONLY ONE function.
1831 * Don't try to apply modification operations (without copy) on them.
1833 ListOfGO MakeSubShapes (in GEOM_Object theMainShape,
1834 in ListOfLong theIndices);
1837 * Get global index of \a theSubShape in \a theMainShape.
1838 * \param theMainShape Main shape.
1839 * \param theSubShape Sub-shape of the main shape.
1840 * \return global index of \a theSubShape in \a theMainShape.
1842 long GetSubShapeIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
1845 * Get global indices of \a theSubShapes in \a theMainShape.
1846 * \param theMainShape Main shape.
1847 * \param theSubShapes List of sub-shapes of the main shape.
1848 * \return list of global indices of \a theSubShapes in \a theMainShape.
1850 ListOfLong GetSubShapesIndices (in GEOM_Object theMainShape, in ListOfGO theSubShapes);
1853 * \brief Get index of \a theSubShape in \a theMainShape, unique among sub-shapes of the same type.
1855 * Together with method <VAR>GetShapeTypeString()</VAR> it can be used
1856 * to generate automatic names for sub-shapes, when publishing them in a study.
1857 * \param theMainShape Main shape.
1858 * \param theSubShape Sub-shape of the main shape.
1859 * \return index of \a theSubShape in a list of all sub-shapes of \a theMainShape of the same type.
1861 long GetTopologyIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
1864 * \brief Get name of type of \a theShape.
1866 * Use wide type notation, taking into consideration both topology and geometry of the shape.
1867 * Together with method <VAR>GetTopologyIndex()</VAR> it can be used
1868 * to generate automatic names for sub-shapes, when publishing them in a study.
1869 * \param theShape The shape to get a type of.
1870 * \return String, containing a type name of \a theShape.
1872 string GetShapeTypeString (in GEOM_Object theShape);
1875 * \brief Count number of faces in the given shape.
1876 * \param theShape Shape to count faces in.
1877 * \return Number of faces in the given shape.
1879 long NumberOfFaces (in GEOM_Object theShape);
1882 * \brief Count number of edges in the given shape.
1883 * \param theShape Shape to count edges in.
1884 * \return Number of edges in theShape.
1886 long NumberOfEdges (in GEOM_Object theShape);
1889 * \brief Count number of sub-shapes of type \a theShapeType in the given shape.
1890 * \param theShape Shape to count sub-shapes in.
1891 * \param theShapeType The type of sub-shapes to count.
1892 * \return Number of sub-shapes of type \a theShapeType in \a theShape.
1894 long NumberOfSubShapes (in GEOM_Object theShape,
1895 in long theShapeType);
1898 * Reverses an orientation the given shape.
1899 * \param theShape Shape to be reversed.
1900 * \return The reversed copy of theShape.
1902 GEOM_Object ChangeOrientation (in GEOM_Object theShape);
1905 * \brief Retrieve all free faces from the given shape.
1907 * Free face is a face, which is not shared between two shells of the shape.
1908 * \param theShape Shape to find free faces in.
1909 * \return List of IDs of all free faces, contained in theShape.
1911 ListOfLong GetFreeFacesIDs (in GEOM_Object theShape);
1914 * \brief Get all sub-shapes of theShape1 of the given type, shared with theShape2.
1915 * \param theShape1 Shape to find sub-shapes in.
1916 * \param theShape2 Shape to find shared sub-shapes with.
1917 * \param theShapeType Type of sub-shapes to be retrieved.
1918 * \return List of sub-shapes of theShape1, shared with theShape2.
1920 ListOfGO GetSharedShapes (in GEOM_Object theShape1,
1921 in GEOM_Object theShape2,
1922 in long theShapeType);
1925 * \brief Get all sub-shapes, shared by all shapes in the list \a theShapes.
1926 * \param theShapes Shapes to find common sub-shapes of.
1927 * \param theShapeType Type of sub-shapes to be retrieved.
1928 * \return List of objects, that are sub-shapes of all given shapes.
1930 ListOfGO GetSharedShapesMulti (in ListOfGO theShapes,
1931 in long theShapeType);
1934 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1935 * the specified plane by the certain way, defined through \a theState parameter.
1936 * \param theShape Shape to find sub-shapes of.
1937 * \param theShapeType Type of sub-shapes to be retrieved.
1938 * \param theAx1 Vector (or line, or linear edge), specifying normal
1939 * direction and location of the plane to find shapes on.
1940 * \param theState The state of the sub-shapes to find.
1941 * \return List of all found sub-shapes.
1943 ListOfGO GetShapesOnPlane (in GEOM_Object theShape,
1944 in long theShapeType,
1945 in GEOM_Object theAx1,
1946 in shape_state theState);
1948 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1949 * the specified plane by the certain way, defined through \a theState parameter.
1950 * \param theShape Shape to find sub-shapes of.
1951 * \param theShapeType Type of sub-shapes to be retrieved.
1952 * \param theAx1 Vector (or line, or linear edge), specifying normal
1953 * direction of the plane to find shapes on.
1954 * \param thePnt Point specifying location of the plane to find shapes on.
1955 * \param theState The state of the sub-shapes to find.
1956 * \return List of all found sub-shapes.
1958 ListOfGO GetShapesOnPlaneWithLocation (in GEOM_Object theShape,
1959 in long theShapeType,
1960 in GEOM_Object theAx1,
1961 in GEOM_Object thePnt,
1962 in shape_state theState);
1967 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1968 * the specified cylinder by the certain way, defined through \a theState parameter.
1969 * \param theShape Shape to find sub-shapes of.
1970 * \param theShapeType Type of sub-shapes to be retrieved.
1971 * \param theAxis Vector (or line, or linear edge), specifying
1972 * axis of the cylinder to find shapes on.
1973 * \param theRadius Radius of the cylinder to find shapes on.
1974 * \param theState The state of the sub-shapes to find.
1975 * \return List of all found sub-shapes.
1977 ListOfGO GetShapesOnCylinder (in GEOM_Object theShape,
1978 in long theShapeType,
1979 in GEOM_Object theAxis,
1980 in double theRadius,
1981 in shape_state theState);
1984 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1985 * the specified cylinder by the certain way, defined through \a theState parameter.
1986 * \param theShape Shape to find sub-shapes of.
1987 * \param theShapeType Type of sub-shapes to be retrieved.
1988 * \param theAxis Vector (or line, or linear edge), specifying
1989 * axis of the cylinder to find shapes on.
1990 * \param thePnt Point specifying location of the bottom of the cylinder.
1991 * \param theRadius Radius of the cylinder to find shapes on.
1992 * \param theState The state of the sub-shapes to find.
1993 * \return List of all found sub-shapes.
1995 ListOfGO GetShapesOnCylinderWithLocation (in GEOM_Object theShape,
1996 in long theShapeType,
1997 in GEOM_Object theAxis,
1998 in GEOM_Object thePnt,
1999 in double theRadius,
2000 in shape_state theState);
2003 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2004 * the specified sphere by the certain way, defined through \a theState parameter.
2005 * \param theShape Shape to find sub-shapes of.
2006 * \param theShapeType Type of sub-shapes to be retrieved.
2007 * \param theCenter Point, specifying center of the sphere to find shapes on.
2008 * \param theRadius Radius of the sphere to find shapes on.
2009 * \param theState The state of the sub-shapes to find.
2010 * \return List of all found sub-shapes.
2012 ListOfGO GetShapesOnSphere (in GEOM_Object theShape,
2013 in long theShapeType,
2014 in GEOM_Object theCenter,
2015 in double theRadius,
2016 in shape_state theState);
2019 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2020 * the specified quadrangle by the certain way, defined through \a theState parameter.
2021 * \param theShape Shape to find sub-shapes of.
2022 * \param theShapeType Type of sub-shapes to be retrieved.
2023 * \param theTopLeftPoint Top left quadrangle corner
2024 * \param theTopRigthPoint Top right quadrangle corner
2025 * \param theBottomLeftPoint Bottom left quadrangle corner
2026 * \param theBottomRigthPoint Bottom right quadrangle corner
2027 * \param theState The state of the sub-shapes to find.
2028 * \return List of all found sub-shapes.
2030 ListOfGO GetShapesOnQuadrangle (in GEOM_Object theShape,
2031 in long theShapeType,
2032 in GEOM_Object theTopLeftPoint,
2033 in GEOM_Object theTopRigthPoint,
2034 in GEOM_Object theBottomLeftPoint,
2035 in GEOM_Object theBottomRigthPoint,
2036 in shape_state theState);
2039 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2040 * the specified plane by the certain way, defined through \a theState parameter.
2041 * \param theShape Shape to find sub-shapes of.
2042 * \param theShapeType Type of sub-shapes to be retrieved.
2043 * \param theAx1 Vector (or line, or linear edge), specifying normal
2044 * direction and location of the plane to find shapes on.
2045 * \param theState The state of the sub-shapes to find.
2046 * \return List of IDs of all found sub-shapes.
2048 ListOfLong GetShapesOnPlaneIDs (in GEOM_Object theShape,
2049 in long theShapeType,
2050 in GEOM_Object theAx1,
2051 in shape_state theState);
2054 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2055 * the specified plane by the certain way, defined through \a theState parameter.
2056 * \param theShape Shape to find sub-shapes of.
2057 * \param theShapeType Type of sub-shapes to be retrieved.
2058 * \param theAx1 Vector (or line, or linear edge), specifying normal
2059 * direction of the plane to find shapes on.
2060 * \param thePnt Point specifying location of the plane to find shapes on.
2061 * \param theState The state of the sub-shapes to find.
2062 * \return List of IDs of all found sub-shapes.
2064 ListOfLong GetShapesOnPlaneWithLocationIDs (in GEOM_Object theShape,
2065 in long theShapeType,
2066 in GEOM_Object theAx1,
2067 in GEOM_Object thePnt,
2068 in shape_state theState);
2071 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2072 * the specified cylinder by the certain way, defined through \a theState parameter.
2073 * \param theShape Shape to find sub-shapes of.
2074 * \param theShapeType Type of sub-shapes to be retrieved.
2075 * \param theAxis Vector (or line, or linear edge), specifying
2076 * axis of the cylinder to find shapes on.
2077 * \param theRadius Radius of the cylinder to find shapes on.
2078 * \param theState The state of the sub-shapes to find.
2079 * \return List of IDs of all found sub-shapes.
2081 ListOfLong GetShapesOnCylinderIDs (in GEOM_Object theShape,
2082 in long theShapeType,
2083 in GEOM_Object theAxis,
2084 in double theRadius,
2085 in shape_state theState);
2088 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2089 * the specified cylinder by the certain way, defined through \a theState parameter.
2090 * \param theShape Shape to find sub-shapes of.
2091 * \param theShapeType Type of sub-shapes to be retrieved.
2092 * \param theAxis Vector (or line, or linear edge), specifying
2093 * axis of the cylinder to find shapes on.
2094 * \param thePnt Point specifying location of the bottom of the cylinder.
2095 * \param theRadius Radius of the cylinder to find shapes on.
2096 * \param theState The state of the sub-shapes to find.
2097 * \return List of IDs all found sub-shapes.
2099 ListOfLong GetShapesOnCylinderWithLocationIDs (in GEOM_Object theShape,
2100 in long theShapeType,
2101 in GEOM_Object theAxis,
2102 in GEOM_Object thePnt,
2103 in double theRadius,
2104 in shape_state theState);
2107 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2108 * the specified sphere by the certain way, defined through \a theState parameter.
2109 * \param theShape Shape to find sub-shapes of.
2110 * \param theShapeType Type of sub-shapes to be retrieved.
2111 * \param theCenter Point, specifying center of the sphere to find shapes on.
2112 * \param theRadius Radius of the sphere to find shapes on.
2113 * \param theState The state of the sub-shapes to find.
2114 * \return List of IDs of all found sub-shapes.
2116 ListOfLong GetShapesOnSphereIDs (in GEOM_Object theShape,
2117 in long theShapeType,
2118 in GEOM_Object theCenter,
2119 in double theRadius,
2120 in shape_state theState);
2123 * \brief Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
2124 * the specified quadrangle by the certain way, defined through \a theState parameter.
2125 * \param theShape Shape to find sub-shapes of.
2126 * \param theShapeType Type of sub-shapes to be retrieved.
2127 * \param theTopLeftPoint Top left quadrangle corner
2128 * \param theTopRigthPoint Top right quadrangle corner
2129 * \param theBottomLeftPoint Bottom left quadrangle corner
2130 * \param theBottomRigthPoint Bottom right quadrangle corner
2131 * \param theState The state of the sub-shapes to find.
2132 * \return List of IDs of all found sub-shapes.
2134 ListOfLong GetShapesOnQuadrangleIDs (in GEOM_Object theShape,
2135 in long theShapeType,
2136 in GEOM_Object theTopLeftPoint,
2137 in GEOM_Object theTopRigthPoint,
2138 in GEOM_Object theBottomLeftPoint,
2139 in GEOM_Object theBottomRigthPoint,
2140 in shape_state theState);
2143 * \brief Find sub-shapes complying with given status
2144 * \param theBox - the box to check state of sub-shapes against
2145 * \param theShape - the shape to explore
2146 * \param theShapeType - type of sub-shape of theShape
2147 * \param theState - required state
2148 * \return List of IDs of all found sub-shapes.
2150 ListOfLong GetShapesOnBoxIDs (in GEOM_Object theBox,
2151 in GEOM_Object theShape,
2152 in long theShapeType,
2153 in shape_state theState);
2156 * \brief Find sub-shapes complying with given status
2157 * \param theBox - the box to check state of sub-shapes against
2158 * \param theShape - the shape to explore
2159 * \param theShapeType - type of sub-shape of theShape
2160 * \param theState - required state
2161 * \return List of all found sub-shapes.
2163 ListOfGO GetShapesOnBox (in GEOM_Object theBox,
2164 in GEOM_Object theShape,
2165 in long theShapeType,
2166 in shape_state theState);
2169 * \brief Find sub-shapes complying with given status
2170 * \param theCheckShape - the shape to check state of sub-shapes against. It must be a solid.
2171 * \param theShape - the shape to explore
2172 * \param theShapeType - type of sub-shape of theShape
2173 * \param theState - required state
2174 * \return List of IDs of all found sub-shapes.
2176 ListOfLong GetShapesOnShapeIDs (in GEOM_Object theCheckShape,
2177 in GEOM_Object theShape,
2178 in short theShapeType,
2179 in shape_state theState);
2182 * \brief Find sub-shapes complying with given status
2183 * \param theCheckShape - the shape to check state of sub-shapes against. It must be a solid.
2184 * \param theShape - the shape to explore
2185 * \param theShapeType - type of sub-shape of theShape
2186 * \param theState - required state
2187 * \return List of all found sub-shapes.
2189 ListOfGO GetShapesOnShape (in GEOM_Object theCheckShape,
2190 in GEOM_Object theShape,
2191 in short theShapeType,
2192 in shape_state theState);
2195 * \brief Find sub-shapes complying with given status
2196 * \param theCheckShape - the shape to check state of sub-shapes against. It must be a solid.
2197 * \param theShape - the shape to explore
2198 * \param theShapeType - type of sub-shape of theShape
2199 * \param theState - required state
2200 * \return compound includes all found sub-shapes.
2202 GEOM_Object GetShapesOnShapeAsCompound (in GEOM_Object theCheckShape,
2203 in GEOM_Object theShape,
2204 in short theShapeType,
2205 in shape_state theState);
2208 * \brief Get sub-shape(s) of \a theShapeWhere, which are
2209 * coincident with \a theShapeWhat or could be a part of it.
2210 * \param theShapeWhere Shape to find sub-shapes of.
2211 * \param theShapeWhat Shape, specifying what to find.
2212 * \return Group of all found sub-shapes or a single found sub-shape.
2214 GEOM_Object GetInPlace (in GEOM_Object theShapeWhere,
2215 in GEOM_Object theShapeWhat);
2218 * Old implementation of GetInPlace functionality, based on shape properties.
2220 GEOM_Object GetInPlaceOld (in GEOM_Object theShapeWhere,
2221 in GEOM_Object theShapeWhat);
2224 * \brief Get sub-shape(s) of \a theShapeWhere, which are
2225 * coincident with \a theShapeWhat or could be a part of it.
2227 * Implementation of this method is based on a saved history of an operation,
2228 * produced \a theShapeWhere. The \a theShapeWhat must be among this operation's
2229 * arguments (an argument shape or a sub-shape of an argument shape).
2230 * The operation could be the Partition or one of boolean operations,
2231 * performed on simple shapes (not on compounds).
2233 * \param theShapeWhere Shape to find sub-shapes of.
2234 * \param theShapeWhat Shape, specifying what to find.
2235 * \return Group of all found sub-shapes or a single found sub-shape.
2237 GEOM_Object GetInPlaceByHistory (in GEOM_Object theShapeWhere,
2238 in GEOM_Object theShapeWhat);
2241 * \brief Get sub-shape of theShapeWhere, which are
2242 * coincident with \a theShapeWhat that can either SOLID, FACE, EDGE or VERTEX.
2243 * \param theShapeWhere Shape to find sub-shapes of.
2244 * \param theShapeWhat Shape, specifying what to find.
2245 * \return found sub-shape.
2247 GEOM_Object GetSame (in GEOM_Object theShapeWhere,
2248 in GEOM_Object theShapeWhat);
2251 * \brief Get sub-shape Ids of theShapeWhere, which are
2252 * coincident with \a theShapeWhat that can either SOLID, FACE, EDGE or VERTEX.
2253 * \param theShapeWhere Shape to find sub-shapes of.
2254 * \param theShapeWhat Shape, specifying what to find.
2255 * \return found sub-shape Ids.
2257 ListOfLong GetSameIDs (in GEOM_Object theShapeWhere,
2258 in GEOM_Object theShapeWhat);
2262 // # GEOM_IBlocksOperations:
2264 * \brief Interface for Blocks construction
2265 * Face from points or edges, Block from faces,
2266 * Blocks multi-translation and multi-rotation
2268 interface GEOM_IBlocksOperations : GEOM_IOperations
2271 // # Creation of blocks
2274 * \brief Create a quadrangle face from four edges. Order of Edges is not
2275 * important. It is not necessary that edges share the same vertex.
2276 * \param theEdge1,theEdge2,theEdge3,theEdge4 Edges for the face bound.
2277 * \return New GEOM_Object, containing the created face.
2279 GEOM_Object MakeQuad (in GEOM_Object theEdge1,
2280 in GEOM_Object theEdge2,
2281 in GEOM_Object theEdge3,
2282 in GEOM_Object theEdge4);
2285 * \brief Create a quadrangle face on two edges.
2287 * The missing edges will be built by creating the shortest ones.
2288 * \param theEdge1,theEdge2 Two opposite edges for the face.
2289 * \return New GEOM_Object, containing the created face.
2291 GEOM_Object MakeQuad2Edges (in GEOM_Object theEdge1,
2292 in GEOM_Object theEdge2);
2295 * \brief Create a quadrangle face with specified corners.
2297 * The missing edges will be built by creating the shortest ones.
2298 * \param thePnt1,thePnt2,thePnt3,thePnt4 Corner vertices for the face.
2299 * \return New GEOM_Object, containing the created face.
2301 GEOM_Object MakeQuad4Vertices (in GEOM_Object thePnt1,
2302 in GEOM_Object thePnt2,
2303 in GEOM_Object thePnt3,
2304 in GEOM_Object thePnt4);
2307 * \brief Create a hexahedral solid, bounded by the six given faces. Order of
2308 * faces is not important.
2310 * It is not necessary that Faces share the same edge.
2311 * \param theFace1,theFace2,theFace3,theFace4,theFace5,theFace6 Faces for the hexahedral solid.
2312 * \return New GEOM_Object, containing the created solid.
2314 GEOM_Object MakeHexa (in GEOM_Object theFace1,
2315 in GEOM_Object theFace2,
2316 in GEOM_Object theFace3,
2317 in GEOM_Object theFace4,
2318 in GEOM_Object theFace5,
2319 in GEOM_Object theFace6);
2322 * \brief Create a hexahedral solid between two given faces.
2324 * The missing faces will be built by creating the smallest ones.
2325 * \param theFace1,theFace2 Two opposite faces for the hexahedral solid.
2326 * \return New GEOM_Object, containing the created solid.
2328 GEOM_Object MakeHexa2Faces (in GEOM_Object theFace1,
2329 in GEOM_Object theFace2);
2332 // # Extract elements of blocks and blocks compounds
2336 * \brief Get a vertex, found in the given shape by its coordinates.
2337 * \param theShape Block or a compound of blocks.
2338 * \param theX,theY,theZ Coordinates of the sought vertex.
2339 * \param theEpsilon Maximum allowed distance between the resulting
2340 * vertex and point with the given coordinates.
2341 * \return New GEOM_Object, containing the found vertex.
2343 GEOM_Object GetPoint (in GEOM_Object theShape,
2347 in double theEpsilon);
2350 * \brief Find a vertex of the given shape, which has minimal distance to the given point.
2351 * \param theShape Any shape.
2352 * \param thePoint Point, close to the desired vertex.
2353 * \return New GEOM_Object, containing the found vertex.
2355 GEOM_Object GetVertexNearPoint (in GEOM_Object theShape,
2356 in GEOM_Object thePoint);
2359 * \brief Get an edge, found in the given shape by two given vertices.
2360 * \param theShape Block or a compound of blocks.
2361 * \param thePoint1,thePoint2 Points, close to the ends of the desired edge.
2362 * \return New GEOM_Object, containing the found edge.
2364 GEOM_Object GetEdge (in GEOM_Object theShape,
2365 in GEOM_Object thePoint1,
2366 in GEOM_Object thePoint2);
2369 * \brief Find an edge of the given shape, which has minimal distance to the given point.
2370 * \param theShape Block or a compound of blocks.
2371 * \param thePoint Point, close to the desired edge.
2372 * \return New GEOM_Object, containing the found edge.
2374 GEOM_Object GetEdgeNearPoint (in GEOM_Object theShape,
2375 in GEOM_Object thePoint);
2378 * \brief Returns a face, found in the given shape by four given corner vertices.
2379 * \param theShape Block or a compound of blocks.
2380 * \param thePoint1,thePoint2,thePoint3,thePoint4 Points, close to the corners of the desired face.
2381 * \return New GEOM_Object, containing the found face.
2383 GEOM_Object GetFaceByPoints (in GEOM_Object theShape,
2384 in GEOM_Object thePoint1,
2385 in GEOM_Object thePoint2,
2386 in GEOM_Object thePoint3,
2387 in GEOM_Object thePoint4);
2390 * \brief Get a face of block, found in the given shape by two given edges.
2391 * \param theShape Block or a compound of blocks.
2392 * \param theEdge1,theEdge2 Edges, close to the edges of the desired face.
2393 * \return New GEOM_Object, containing the found face.
2395 GEOM_Object GetFaceByEdges (in GEOM_Object theShape,
2396 in GEOM_Object theEdge1,
2397 in GEOM_Object theEdge2);
2400 * \brief Find a face, opposite to the given one in the given block.
2401 * \param theBlock Must be a hexahedral solid.
2402 * \param theFace Face of \a theBlock, opposite to the desired face.
2403 * \return New GEOM_Object, containing the found face.
2405 GEOM_Object GetOppositeFace (in GEOM_Object theBlock,
2406 in GEOM_Object theFace);
2409 * \brief Find a face of the given shape, which has minimal distance to the given point.
2410 * \param theShape Block or a compound of blocks.
2411 * \param thePoint Point, close to the desired face.
2412 * \return New GEOM_Object, containing the found face.
2414 GEOM_Object GetFaceNearPoint (in GEOM_Object theShape,
2415 in GEOM_Object thePoint);
2418 * \brief Find a face of block, whose outside normale has minimal angle with the given vector.
2419 * \param theBlock Block or a compound of blocks.
2420 * \param theVector Vector, close to the normale of the desired face.
2421 * \return New GEOM_Object, containing the found face.
2423 GEOM_Object GetFaceByNormale (in GEOM_Object theBlock,
2424 in GEOM_Object theVector);
2427 * \brief Find all sub-shapes of type \a theShapeType of the given shape,
2428 * which have minimal distance to the given point.
2429 * \param theShape Any shape.
2430 * \param thePoint Point, close to the desired shape.
2431 * \param theShapeType Defines what kind of sub-shapes is searched.
2432 * \param theTolerance The tolerance for distances comparison. All shapes
2433 * with distances to the given point in interval
2434 * [minimal_distance, minimal_distance + theTolerance] will be gathered.
2435 * \return New GEOM_Object, containing a group of all found shapes.
2437 GEOM_Object GetShapesNearPoint (in GEOM_Object theShape,
2438 in GEOM_Object thePoint,
2439 in long theShapeType,
2440 in double theTolerance);
2442 // # Extract blocks from blocks compounds
2446 * \brief Check, if the compound contains only specified blocks.
2447 * \param theCompound The compound to check.
2448 * \param theMinNbFaces If solid has lower number of faces, it is not a block.
2449 * \param theMaxNbFaces If solid has higher number of faces, it is not a block.
2450 * \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
2451 * \param theNbBlocks Number of specified blocks in theCompound.
2452 * \return TRUE, if the given compound contains only blocks.
2454 boolean IsCompoundOfBlocks (in GEOM_Object theCompound,
2455 in long theMinNbFaces,
2456 in long theMaxNbFaces,
2457 out long theNbBlocks);
2460 * \brief Enumeration of Blocks Compound defects.
2464 /* Each element of the compound should be a Block */
2467 /* An element is a potential block, but has degenerated and/or seam edge(s). */
2470 /* A connection between two Blocks should be an entire face or an entire edge */
2473 /* The compound should be connexe */
2476 /* The glue between two quadrangle faces should be applied */
2481 * \brief Description of Blocks Compound defect: type and incriminated sub-shapes.
2486 ListOfLong incriminated;
2490 * \brief Sequence of all Blocks Compound defects.
2492 typedef sequence<BCError> BCErrors;
2495 * \brief Check, if the compound of blocks is given.
2497 * To be considered as a compound of blocks, the
2498 * given shape must satisfy the following conditions:
2499 * - Each element of the compound should be a Block (6 faces and 12 edges).
2500 * - A connection between two Blocks should be an entire quadrangle face or an entire edge.
2501 * - The compound should be connexe.
2502 * - The glue between two quadrangle faces should be applied.
2503 * \note Single block is also accepted as a valid compound of blocks.
2504 * \param theCompound The compound to check.
2505 * \param theErrors Structure, containing discovered errors and incriminated sub-shapes.
2506 * \return TRUE, if the given shape is a compound of blocks.
2508 boolean CheckCompoundOfBlocks (in GEOM_Object theCompound,
2509 out BCErrors theErrors);
2512 * \brief Convert sequence of Blocks Compound errors, returned by
2513 * <VAR>CheckCompoundOfBlocks()</VAR>, into string.
2514 * \param theCompound The bad compound.
2515 * \param theErrors The sequence of \a theCompound errors.
2516 * \return String, describing all the errors in form, suitable for printing.
2518 string PrintBCErrors (in GEOM_Object theCompound,
2519 in BCErrors theErrors);
2522 * \brief Retrieve all non blocks solids and faces from a shape.
2524 * \param theShape The shape to explore.
2525 * \param theNonQuads Output parameter. Group of all non quadrangular faces.
2527 * \return Group of all non block solids (= not 6 faces, or with 6
2528 * faces, but with the presence of non-quadrangular faces).
2530 GEOM_Object GetNonBlocks (in GEOM_Object theShape, out GEOM_Object theNonQuads);
2533 * \brief Remove all seam and degenerated edges from \a theShape.
2535 * Unite faces and edges, sharing one surface.
2536 * \param theShape The compound or single solid to remove irregular edges from.
2537 * \param theOptimumNbFaces If more than zero, unite faces only for those solids,
2538 * that have more than theOptimumNbFaces faces. If zero, unite faces always,
2539 * regardsless their quantity in the solid. If negative, do not unite faces at all.
2540 * For blocks repairing recommended value is 6.
2541 * \return Improved shape.
2543 GEOM_Object RemoveExtraEdges (in GEOM_Object theShape,
2544 in long theOptimumNbFaces);
2547 * \brief Check, if the given shape is a blocks compound.
2549 * Fix all detected errors.
2550 * \note Single block can be also fixed by this method.
2551 * \param theCompound The compound to check and improve.
2552 * \return Improved compound.
2554 GEOM_Object CheckAndImprove (in GEOM_Object theCompound);
2557 * \brief Get all the blocks, contained in the given compound.
2559 * \param theCompound The compound to explode.
2560 * \param theMinNbFaces If solid has lower number of faces, it is not a block.
2561 * \param theMaxNbFaces If solid has higher number of faces, it is not a block.
2562 * \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
2563 * \return List of GEOM_Object, containing the retrieved blocks.
2565 ListOfGO ExplodeCompoundOfBlocks (in GEOM_Object theCompound,
2566 in long theMinNbFaces,
2567 in long theMaxNbFaces);
2570 * \brief Find block, containing the given point inside its volume or on boundary.
2571 * \param theCompound Compound, to find block in.
2572 * \param thePoint Point, close to the desired block. If the point lays on
2573 * boundary between some blocks, we return block with nearest center.
2574 * \return New GEOM_Object, containing the found block.
2576 GEOM_Object GetBlockNearPoint (in GEOM_Object theCompound,
2577 in GEOM_Object thePoint);
2580 * \brief Find block, containing all the elements, passed as the parts, or maximum quantity of them.
2581 * \param theCompound Compound, to find block in.
2582 * \param theParts List of faces and/or edges and/or vertices to be parts of the found block.
2583 * \return New GEOM_Object, containing the found block.
2585 GEOM_Object GetBlockByParts (in GEOM_Object theCompound,
2586 in ListOfGO theParts);
2589 * \brief Return all blocks, containing all the elements, passed as the parts.
2590 * \param theCompound Compound, to find blocks in.
2591 * \param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
2592 * \return List of GEOM_Object, containing the found blocks.
2594 ListOfGO GetBlocksByParts (in GEOM_Object theCompound,
2595 in ListOfGO theParts);
2597 // # Operations on blocks with gluing of result
2600 * \brief Multi-transformate block and glue the result.
2602 * Transformation is defined so, as to superpose theDirFace1 with theDirFace2.
2603 * \param theBlock Hexahedral solid to be multi-transformed.
2604 * \param theDirFace1 First direction face global index.
2605 * \param theDirFace2 Second direction face global index.
2606 * \param theNbTimes Quantity of transformations to be done.
2607 * \note Global index of sub-shape can be obtained, using method
2608 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2609 * \return New GEOM_Object, containing the result shape.
2611 GEOM_Object MakeMultiTransformation1D (in GEOM_Object theBlock,
2612 in long theDirFace1,
2613 in long theDirFace2,
2614 in long theNbTimes);
2617 * \brief Multi-transformate block and glue the result.
2618 * \param theBlock Hexahedral solid to be multi-transformed.
2619 * \param theDirFace1U,theDirFace2U Direction faces for the first transformation.
2620 * \param theDirFace1V,theDirFace2V Direction faces for the second transformation.
2621 * \param theNbTimesU,theNbTimesV Quantity of transformations to be done.
2622 * \return New GEOM_Object, containing the result shape.
2624 GEOM_Object MakeMultiTransformation2D (in GEOM_Object theBlock,
2625 in long theDirFace1U,
2626 in long theDirFace2U,
2627 in long theNbTimesU,
2628 in long theDirFace1V,
2629 in long theDirFace2V,
2630 in long theNbTimesV);
2632 // # Special operation - propagation
2636 * \brief Build all possible propagation groups.
2638 * Propagation group is a set of all edges, opposite to one (main)
2639 * edge of this group directly or through other opposite edges.
2640 * Notion of Opposite Edge make sence only on quadrangle face.
2641 * \param theShape Shape to build propagation groups on.
2642 * \return List of GEOM_Object, each of them is a propagation group.
2644 ListOfGO Propagate (in GEOM_Object theShape);
2647 // # GEOM_IBooleanOperations
2649 * \brief Interface for boolean operations (Cut, Fuse, Common)
2651 interface GEOM_IBooleanOperations : GEOM_IOperations
2654 * \brief Perform one of boolean operations on two given shapes.
2655 * \param theShape1 First argument for boolean operation.
2656 * \param theShape2 Second argument for boolean operation.
2657 * \param theOperation Indicates the operation to be done:
2658 * 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
2659 * \return New GEOM_Object, containing the result shape.
2661 GEOM_Object MakeBoolean (in GEOM_Object theShape1,
2662 in GEOM_Object theShape2,
2663 in long theOperation);
2666 * \brief Perform partition operation.
2668 * \param theShapes Shapes to be intersected.
2669 * \param theTools Shapes to intersect theShapes.
2670 * \note Each compound from ListShapes and ListTools will be exploded in order
2671 * to avoid possible intersection between shapes from this compound.
2672 * \param theLimit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
2673 * \param theKeepNonlimitShapes: if this parameter == 0, then only shapes of
2674 * target type (equal to Limit) are kept in the result,
2675 * else standalone shapes of lower dimension
2676 * are kept also (if they exist).
2678 * After implementation new version of PartitionAlgo (October 2006)
2679 * other parameters are ignored by current functionality. They are kept
2680 * in this function only for supporting old versions.
2681 * Ignored parameters:
2682 * \param theKeepInside Shapes, outside which the results will be deleted.
2683 * Each shape from theKeepInside must belong to theShapes also.
2684 * \param theRemoveInside Shapes, inside which the results will be deleted.
2685 * Each shape from theRemoveInside must belong to theShapes also.
2686 * \param theRemoveWebs If TRUE, perform Glue 3D algorithm.
2687 * \param theMaterials Material indices for each shape. Make sence, only if theRemoveWebs is TRUE.
2689 * \return New GEOM_Object, containing the result shapes.
2691 GEOM_Object MakePartition (in ListOfGO theShapes,
2692 in ListOfGO theTools,
2693 in ListOfGO theKeepInside,
2694 in ListOfGO theRemoveInside,
2696 in boolean theRemoveWebs,
2697 in ListOfLong theMaterials,
2698 in short theKeepNonlimitShapes);
2701 * \brief Perform partition operation.
2703 * This method may be usefull if it is needed to make a partition for
2704 * a compound containing nonintersected shapes. Performance will be better
2705 * since intersection between shapes from compound is not performed.
2707 * Description of all parameters as in previous method MakePartition()
2709 * \note Passed compounds (via ListShapes or via ListTools)
2710 * have to consist of nonintersecting shapes.
2712 * \return New GEOM_Object, containing the result shapes.
2714 GEOM_Object MakePartitionNonSelfIntersectedShape (in ListOfGO theShapes,
2715 in ListOfGO theTools,
2716 in ListOfGO theKeepInside,
2717 in ListOfGO theRemoveInside,
2719 in boolean theRemoveWebs,
2720 in ListOfLong theMaterials,
2721 in short theKeepNonlimitShapes);
2724 * \brief Perform partition of the Shape with the Plane
2725 * \param theShape Shape to be intersected.
2726 * \param thePlane Tool shape, to intersect theShape.
2727 * \return New GEOM_Object, containing the result shape.
2729 GEOM_Object MakeHalfPartition (in GEOM_Object theShape,
2730 in GEOM_Object thePlane);
2733 // # GEOM_ICurvesOperations:
2735 * \brief Interface for curves creation.
2737 * Polyline, Circle, Spline (Bezier and Interpolation)
2739 interface GEOM_ICurvesOperations : GEOM_IOperations
2742 * \brief Create a circle with given center, normal vector and radius.
2743 * \param thePnt Circle center.
2744 * \param theVec Vector, normal to the plane of the circle.
2745 * \param theR Circle radius.
2746 * \return New GEOM_Object, containing the created circle.
2748 GEOM_Object MakeCirclePntVecR (in GEOM_Object thePnt,
2749 in GEOM_Object theVec,
2752 * \brief Create a circle, passing through three given points
2753 * \param thePnt1,thePnt2,thePnt3 Points, defining the circle.
2754 * \return New GEOM_Object, containing the created circle.
2756 GEOM_Object MakeCircleThreePnt (in GEOM_Object thePnt1,
2757 in GEOM_Object thePnt2,
2758 in GEOM_Object thePnt3);
2760 * \brief Create a circle with given center, with a radius equals the distance from center to Point1
2761 * and on a plane defined by all of three points.
2762 * \param thePnt1,thePnt2,thePnt3 Points, defining the circle.
2763 * \return New GEOM_Object, containing the created circle.
2765 GEOM_Object MakeCircleCenter2Pnt (in GEOM_Object thePnt1,
2766 in GEOM_Object thePnt2,
2767 in GEOM_Object thePnt3);
2769 * \brief Create an ellipse with given center, normal vector and radiuses.
2770 * \param thePnt Ellipse center.
2771 * \param theVec Vector, normal to the plane of the ellipse.
2772 * \param theRMajor Major ellipse radius.
2773 * \param theRMinor Minor ellipse radius.
2774 * \return New GEOM_Object, containing the created ellipse.
2776 GEOM_Object MakeEllipse (in GEOM_Object thePnt,
2777 in GEOM_Object theVec,
2778 in double theRMajor,
2779 in double theRMinor);
2782 * \brief Create an ellipse with given center, normal vector, main axis vector and radiuses.
2783 * \param thePnt Ellipse center.
2784 * \param theVec Vector, normal to the plane of the ellipse.
2785 * \param theRMajor Major ellipse radius.
2786 * \param theRMinor Minor ellipse radius.
2787 * \param theVecMaj Vector, direction of the ellipse's main axis.
2788 * \return New GEOM_Object, containing the created ellipse.
2790 GEOM_Object MakeEllipseVec (in GEOM_Object thePnt,
2791 in GEOM_Object theVec,
2792 in double theRMajor,
2793 in double theRMinor,
2794 in GEOM_Object theVecMaj);
2797 * \brief Create an arc of circle, passing through three given points.
2798 * \param thePnt1 Start point of the arc.
2799 * \param thePnt2 Middle point of the arc.
2800 * \param thePnt3 End point of the arc.
2801 * \return New GEOM_Object, containing the created arc.
2803 GEOM_Object MakeArc (in GEOM_Object thePnt1,
2804 in GEOM_Object thePnt2,
2805 in GEOM_Object thePnt3);
2808 * \brief Create an arc of circle of center C from one point to another
2809 * \param theCenter Center point of the arc.
2810 * \param thePnt1 Start point of the arc.
2811 * \param thePnt2 End point of the arc.
2812 * \param theSense Orientation of the arc
2813 * \return New GEOM_Object, containing the created arc.
2815 GEOM_Object MakeArcCenter (in GEOM_Object theCenter,
2816 in GEOM_Object thePnt1,
2817 in GEOM_Object thePnt2,
2818 in boolean theSense);
2821 * \brief Create an arc of ellipse of center C and two points P1 P2.
2822 * \param theCenter Center point of the arc.
2823 * \param thePnt1 Major radius is distance from center to Pnt1.
2824 * \param thePnt2 define a plane and Minor radius as a shortest
2825 * distance from Pnt2 to vector Center->Pnt1.
2826 * \return New GEOM_Object, containing the created arc.
2828 GEOM_Object MakeArcOfEllipse (in GEOM_Object theCenter,
2829 in GEOM_Object thePnt1,
2830 in GEOM_Object thePnt2);
2834 * \brief Create a polyline on the set of points.
2835 * \param thePoints Sequence of points for the polyline.
2836 * \param theIsClosed If TRUE, build a closed wire.
2837 * \return New GEOM_Object, containing the created polyline.
2839 GEOM_Object MakePolyline (in ListOfGO thePoints,
2840 in boolean theIsClosed);
2843 * \brief Create bezier curve on the set of points.
2844 * \param thePoints Sequence of points for the bezier curve.
2845 * \param theIsClosed If TRUE, build a closed curve.
2846 * \return New GEOM_Object, containing the created bezier curve.
2848 GEOM_Object MakeSplineBezier (in ListOfGO thePoints,
2849 in boolean theIsClosed);
2852 * \brief Create B-Spline curve on the set of points.
2853 * \param thePoints Sequence of points for the B-Spline curve.
2854 * \param theIsClosed If TRUE, build a closed curve.
2855 * \param theDoReordering If TRUE, the algo does not follow the order of
2856 * \a thePoints but searches for the closest vertex.
2857 * \return New GEOM_Object, containing the created B-Spline curve.
2859 GEOM_Object MakeSplineInterpolation (in ListOfGO thePoints,
2860 in boolean theIsClosed,
2861 in boolean theDoReordering);
2864 * \brief Create B-Spline curve on the set of points.
2865 * \param thePoints Sequence of points for the B-Spline curve.
2866 * \param theFirstVec Vector object, defining the curve direction at its first point.
2867 * \param theLastVec Vector object, defining the curve direction at its last point.
2868 * \return New GEOM_Object, containing the created B-Spline curve.
2870 GEOM_Object MakeSplineInterpolWithTangents (in ListOfGO thePoints,
2871 in GEOM_Object theFirstVec,
2872 in GEOM_Object theLastVec);
2875 * \brief Creates a curve using the parametric definition of the basic points.
2876 * \param thexExpr parametric equation of the coordinates X.
2877 * \param theyExpr parametric equation of the coordinates Y.
2878 * \param thezExpr parametric equation of the coordinates Z.
2879 * \param theParamMin the minimal value of the parameter.
2880 * \param theParamMax the maximum value of the parameter.
2881 * \param theParamStep the step of the parameter.
2882 * \param theCurveType the type of the curve.
2883 * \return New GEOM_Object, containing the created curve.
2885 GEOM_Object MakeCurveParametric(in string thexExpr,
2888 in double theParamMin,
2889 in double theParamMax,
2890 in double theParamStep,
2891 in curve_type theCurveType);
2894 * \brief Creates a curve using the parametric definition of the basic points.
2895 * \param thexExpr parametric equation of the coordinates X.
2896 * \param theyExpr parametric equation of the coordinates Y.
2897 * \param thezExpr parametric equation of the coordinates Z.
2898 * \param theParamMin the minimal value of the parameter.
2899 * \param theParamMax the maximum value of the parameter.
2900 * \param theParamNbStep the number of steps of the parameter discretization.
2901 * \param theCurveType the type of the curve.
2902 * \return New GEOM_Object, containing the created curve.
2904 GEOM_Object MakeCurveParametricNew(in string thexExpr,
2907 in double theParamMin,
2908 in double theParamMax,
2909 in long theParamNbStep,
2910 in curve_type theCurveType);
2913 * \brief Create a sketcher (wire or face), following the textual description,
2914 * passed through \a theCommand argument.
2916 * Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
2917 * Format of the description string has to be the following:
2919 * "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
2922 * - x1, y1 are coordinates of the first sketcher point (zero by default),
2924 * - "R angle" : Set the direction by angle
2925 * - "D dx dy" : Set the direction by DX & DY
2928 * - "TT x y" : Create segment by point at X & Y
2929 * - "T dx dy" : Create segment by point with DX & DY
2930 * - "L length" : Create segment by direction & Length
2931 * - "IX x" : Create segment by direction & Intersect. X
2932 * - "IY y" : Create segment by direction & Intersect. Y
2935 * - "C radius length" : Create arc by direction, radius and length(in degree)
2938 * - "WW" : Close Wire (to finish)
2939 * - "WF" : Close Wire and build face (to finish)
2941 * \param theCommand String, defining the sketcher in local
2942 * coordinates of the working plane.
2943 * \param theWorkingPlane Nine double values, defining origin,
2944 * OZ and OX directions of the working plane.
2945 * \return New GEOM_Object, containing the created wire or face.
2947 GEOM_Object MakeSketcher (in string theCommand, in ListOfDouble theWorkingPlane);
2950 * \brief Create a sketcher (wire or face), following the textual description,
2951 * passed through \a theCommand argument.
2953 * For format of the description string see the previous method.\n
2955 * \param theCommand String, defining the sketcher in local
2956 * coordinates of the working plane.
2957 * \param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
2958 * \return New GEOM_Object, containing the created wire or face.
2960 GEOM_Object MakeSketcherOnPlane (in string theCommand, in GEOM_Object theWorkingPlane);
2963 * \brief Create a 3D sketcher, following the textual description,
2964 * passed through \a theCommand argument.
2966 * Format of the description string has to be the following:
2968 * "3DSketcher:CMD[:CMD[:CMD...]]"
2970 * Where CMD is one of
2971 * - "TT x y z" : Create segment by point at X & Y or set the first point
2972 * - "T dx dy dz" : Create segment by point with DX & DY
2975 * - "OXY angleX angle2 length" : Create segment by two angles and length
2976 * - "OYZ angleY angle2 length" : Create segment by two angles and length
2977 * - "OXZ angleX angle2 length" : Create segment by two angles and length
2980 * - "WW" : Close Wire (to finish)
2982 * \param theCommand String, defining the sketcher in local
2983 * coordinates of the working plane.
2984 * \return New GEOM_Object, containing the created wire.
2986 GEOM_Object Make3DSketcherCommand (in string theCommand);
2989 * \brief Create a 3D sketcher, made of a straight segments, joining points
2990 * with coordinates passed through \a theCoordinates argument.
2992 * Order of coordinates has to be the following:
2993 * x1, y1, z1, x2, y2, z2, ..., xN, yN, zN
2995 * \param theCoordinates List of double values.
2996 * \return New GEOM_Object, containing the created wire.
2998 GEOM_Object Make3DSketcher (in ListOfDouble theCoordinates);
3001 // # GEOM_ILocalOperations:
3003 * \brief Interface for fillet and chamfer creation.
3005 interface GEOM_ILocalOperations : GEOM_IOperations
3008 * \brief Perform a fillet on all edges of the given shape.
3009 * \param theShape Shape, to perform fillet on.
3010 * \param theR Fillet radius.
3011 * \return New GEOM_Object, containing the result shape.
3013 GEOM_Object MakeFilletAll (in GEOM_Object theShape,
3017 * \brief Perform a fillet on the specified edges of the given shape
3018 * \param theShape Shape, to perform fillet on.
3019 * \param theR Fillet radius.
3020 * \param theEdges Global indices of edges to perform fillet on.
3021 * \note Global index of sub-shape can be obtained, using method
3022 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3023 * \return New GEOM_Object, containing the result shape.
3025 GEOM_Object MakeFilletEdges (in GEOM_Object theShape,
3027 in ListOfLong theEdges);
3028 GEOM_Object MakeFilletEdgesR1R2 (in GEOM_Object theShape,
3031 in ListOfLong theEdges);
3034 * \brief Perform a fillet on all edges of the specified faces of the given shape.
3035 * \param theShape Shape, to perform fillet on.
3036 * \param theR Fillet radius.
3037 * \param theFaces Global indices of faces to perform fillet on.
3038 * \note Global index of sub-shape can be obtained, using method
3039 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3040 * \return New GEOM_Object, containing the result shape.
3042 GEOM_Object MakeFilletFaces (in GEOM_Object theShape,
3044 in ListOfLong theFaces);
3046 GEOM_Object MakeFilletFacesR1R2 (in GEOM_Object theShape,
3049 in ListOfLong theFaces);
3052 * \brief Perform a fillet on a face or a shell at the specified vertexes.
3053 * \param theShape Shape, to perform fillet on.
3054 * \param theR Fillet radius.
3055 * \param theVertexes Global indices of vertexes to perform fillet on.
3056 * \note Global index of sub-shape can be obtained, using method
3057 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3058 * \return New GEOM_Object, containing the result shape.
3060 GEOM_Object MakeFillet2D (in GEOM_Object theShape,
3062 in ListOfLong theVertexes);
3065 * \brief Perform a fillet on edges of the specified vertexes of the given wire.
3066 * \param theShape Shape, to perform fillet on.
3067 * \param theR Fillet radius.
3068 * \param theVertexes Global indices of vertexes to perform fillet on.
3069 * \note Global index of sub-shape can be obtained, using method
3070 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3071 * \note The list of vertices coudl be empty, in this case fillet fill be done
3072 * at all vertices in given wire
3073 * \param doIgnoreSecantVertices If FALSE, fillet radius is always limited
3074 * by the length of the edges, nearest to the fillet vertex.
3075 * But sometimes the next edge is C1 continuous with the one, nearest to
3076 * the fillet point, and such two (or more) edges can be united to allow
3077 * bigger radius. Set this flag to TRUE to allow collinear edges union,
3078 * thus ignoring the secant vertex (vertices).
3079 * \return New GEOM_Object, containing the result shape.
3081 GEOM_Object MakeFillet1D (in GEOM_Object theShape,
3083 in ListOfLong theVertexes,
3084 in boolean doIgnoreSecantVertices);
3087 * \brief Perform a symmetric chamfer on all edges of the given shape.
3088 * \param theShape Shape, to perform chamfer on.
3089 * \param theD Chamfer size along each face.
3090 * \return New GEOM_Object, containing the result shape.
3092 GEOM_Object MakeChamferAll (in GEOM_Object theShape,
3096 * \brief Perform a chamfer on edges, common to the specified faces.
3097 * with distance D1 on the Face1
3098 * \param theShape Shape, to perform chamfer on.
3099 * \param theD1 Chamfer size along \a theFace1.
3100 * \param theD2 Chamfer size along \a theFace2.
3101 * \param theFace1,theFace2 Global indices of two faces of \a theShape.
3102 * \note Global index of sub-shape can be obtained, using method
3103 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3104 * \return New GEOM_Object, containing the result shape.
3106 GEOM_Object MakeChamferEdge (in GEOM_Object theShape,
3107 in double theD1, in double theD2,
3108 in long theFace1, in long theFace2);
3110 * \brief The Same but with params theD = Chamfer Lenght
3111 * and theAngle = Chamfer Angle (Angle in radians)
3113 GEOM_Object MakeChamferEdgeAD (in GEOM_Object theShape,
3114 in double theD, in double theAngle,
3115 in long theFace1, in long theFace2);
3118 * \brief Perform a chamfer on all edges of the specified faces.
3119 * with distance D1 on the first specified face (if several for one edge)
3120 * \param theShape Shape, to perform chamfer on.
3121 * \param theD1 Chamfer size along face from \a theFaces. If both faces,
3122 * connected to the edge, are in \a theFaces, \a theD1
3123 * will be get along face, which is nearer to \a theFaces beginning.
3124 * \param theD2 Chamfer size along another of two faces, connected to the edge.
3125 * \param theFaces Sequence of global indices of faces of \a theShape.
3126 * \note Global index of sub-shape can be obtained, using method
3127 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3128 * \return New GEOM_Object, containing the result shape.
3130 GEOM_Object MakeChamferFaces (in GEOM_Object theShape,
3131 in double theD1, in double theD2,
3132 in ListOfLong theFaces);
3134 * The Same but with params theD = Chamfer Lenght
3135 * and theAngle = Chamfer Angle (Angle in radians)
3137 GEOM_Object MakeChamferFacesAD (in GEOM_Object theShape,
3138 in double theD, in double theAngle,
3139 in ListOfLong theFaces);
3142 * \brief Perform a chamfer on edges,
3143 * with distance D1 on the first specified face (if several for one edge)
3144 * \param theShape Shape, to perform chamfer on.
3145 * \param theD1,theD2 Chamfer size
3146 * \param theEdges Sequence of edges of \a theShape.
3147 * \return New GEOM_Object, containing the result shape.
3149 GEOM_Object MakeChamferEdges (in GEOM_Object theShape,
3150 in double theD1, in double theD2,
3151 in ListOfLong theEdges);
3153 * The Same but with params theD = Chamfer Lenght
3154 * and theAngle = Chamfer Angle (Angle in radians)
3156 GEOM_Object MakeChamferEdgesAD (in GEOM_Object theShape,
3157 in double theD, in double theAngle,
3158 in ListOfLong theEdges);
3161 * \brief Perform an Archimde operation on the given shape with given parameters.
3162 * The object presenting the resulting face is returned
3163 * \param theShape Shape to be put in water.
3164 * \param theWeight Weight og the shape.
3165 * \param theWaterDensity Density of the water.
3166 * \param theMeshDeflection Deflection od the mesh, using to compute the section.
3167 * \return New GEOM_Object, containing a section of \a theShape
3168 * by a plane, corresponding to water level.
3170 GEOM_Object MakeArchimede (in GEOM_Object theShape,
3171 in double theWeight,
3172 in double theWaterDensity,
3173 in double theMeshDeflection);
3176 * \brief Duplicates <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
3178 * Present here only for compatibility.
3180 long GetSubShapeIndex (in GEOM_Object theShape, in GEOM_Object theSubShape);
3183 // # GEOM_IHealingOperations:
3185 * \brief Interface for shape healing operations
3187 * Shape Processing, SuppressFaces, etc.
3189 interface GEOM_IHealingOperations : GEOM_IOperations
3192 * \brief Apply a sequence of Shape Healing operators to the given object.
3193 * \param theShapes Shape to be processed.
3194 * \param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
3195 * \param theParameters List of names of parameters
3196 * ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
3197 * \param theValues List of values of parameters, in the same order
3198 * as parameters are listed in \a theParameters list.
3199 * \return New GEOM_Object, containing processed shape.
3201 GEOM_Object ProcessShape (in GEOM_Object theShapes,
3202 in string_array theOperators,
3203 in string_array theParameters,
3204 in string_array theValues);
3207 * \brief Get default sequence of operators, their parameters and parameters' values
3208 * of Shape Process operation.
3210 * In the current implementation the defaults are
3211 * read from the file pointed by CSF_ShHealingDefaults environmental variable.
3212 * \param theOperators Output. Default list of names of operators.
3213 * \param theParameters Output. Default list of names of parameters.
3214 * \param theValues Output. List of default values of parameters, in the same order
3215 * as parameters are listed in \a theParameters list.
3217 void GetShapeProcessParameters (out string_array theOperators,
3218 out string_array theParameters,
3219 out string_array theValues);
3221 * \brief Get parameters and parameters' values for the given Shape Process operation.
3223 * In the current implementation the defaults are
3224 * read from the file pointed by CSF_ShHealingDefaults environmental variable.
3225 * \param theOperator Input. The operator's name.
3226 * \param theParameters Output. Default list of names of parameters.
3227 * \param theValues Output. List of default values of parameters, in the same order
3228 * as parameters are listed in \a theParameters list.
3230 void GetOperatorParameters (in string theOperator,
3231 out string_array theParameters,
3232 out string_array theValues);
3235 * \brief Remove faces from the given object (shape).
3236 * \param theObject Shape to be processed.
3237 * \param theFaces Indices of faces to be removed, if EMPTY then the method
3238 * removes ALL faces of the given object.
3239 * \return New GEOM_Object, containing processed shape.
3241 GEOM_Object SuppressFaces (in GEOM_Object theObject, in short_array theFaces);
3244 * \brief Close an open wire.
3245 * \param theObject Shape to be processed.
3246 * \param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
3247 * if -1, then theObject itself is a wire.
3248 * \param isCommonVertex If TRUE : closure by creation of a common vertex,
3249 * If FALS : closure by creation of an edge between ends.
3250 * \return New GEOM_Object, containing processed shape.
3252 GEOM_Object CloseContour (in GEOM_Object theObject, in short_array theWires,
3253 in boolean isCommonVertex);
3256 * \brief Remove internal wires and edges from the given object (face).
3257 * \param theObject Shape to be processed.
3258 * \param theWires Indices of wires to be removed, if EMPTY then the method
3259 * removes ALL internal wires of the given object.
3260 * \return New GEOM_Object, containing processed shape.
3262 GEOM_Object RemoveIntWires (in GEOM_Object theObject, in short_array theWires);
3265 * \brief Remove internal closed contours (holes) from the given object.
3266 * \param theObject Shape to be processed.
3267 * \param theWires Indices of wires to be removed, if EMPTY then the method
3268 * removes ALL internal holes of the given object
3269 * \return New GEOM_Object, containing processed shape.
3271 GEOM_Object FillHoles (in GEOM_Object theObject, in short_array theWires);
3274 * Sewing of the given object.
3275 * \param theObject Shape to be processed.
3276 * \param theTolerance Required tolerance value.
3277 * \return New GEOM_Object, containing processed shape.
3279 GEOM_Object Sew (in GEOM_Object theObject, in double theTolerance);
3282 * \brief Addition of a point to a given edge object.
3283 * \param theObject Shape to be processed.
3284 * \param theEdgeIndex Index of edge to be divided within theObject's shape,
3285 * if -1, then theObject itself is the edge.
3286 * \param theValue Value of parameter on edge or length parameter,
3287 * depending on \a isByParameter.
3288 * \param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
3289 * if FALSE : \a theValue is treated as a length parameter [0..1]
3290 * \return New GEOM_Object, containing processed shape.
3292 GEOM_Object DivideEdge (in GEOM_Object theObject, in short theEdgeIndex,
3293 in double theValue, in boolean isByParameter);
3296 * \brief Suppress the vertices in the wire in case if adjacent edges are C1 continuous.
3297 * \param theWire Wire to minimize the number of C1 continuous edges in.
3298 * \param theVertices A list of vertices to suppress. If the list
3299 * is empty, all vertices in a wire will be assumed.
3300 * \return New GEOM_Object with modified wire.
3302 GEOM_Object FuseCollinearEdgesWithinWire (in GEOM_Object theWire,
3303 in ListOfGO theVertices);
3306 * \brief Get a list of wires (wrapped in GEOM_Object-s),
3307 * that constitute a free boundary of the given shape.
3308 * \param theObject Shape to get free boundary of.
3309 * \param theClosedWires Output. Closed wires on the free boundary of the given shape.
3310 * \param theOpenWires Output. Open wires on the free boundary of the given shape.
3311 * \return FALSE, if an error(s) occured during the method execution.
3313 boolean GetFreeBoundary (in GEOM_Object theObject,
3314 out ListOfGO theClosedWires,
3315 out ListOfGO theOpenWires);
3318 * \brief Change orientation of the given object.
3319 * \param theObject Shape to be processed.
3320 * \return New GEOM_Object, containing processed shape.
3322 GEOM_Object ChangeOrientation (in GEOM_Object theObject);
3323 GEOM_Object ChangeOrientationCopy (in GEOM_Object theObject);
3326 * \brief Try to limit tolerance of the given object by value \a theTolerance.
3327 * \param theObject Shape to be processed.
3328 * \param theTolerance Required tolerance value.
3329 * \return New GEOM_Object, containing processed shape.
3331 GEOM_Object LimitTolerance (in GEOM_Object theObject, in double theTolerance);
3335 // # GEOM_IInsertOperations:
3337 * \brief Interface for shape insert operations (like copy, import).
3340 interface GEOM_IInsertOperations : GEOM_IOperations
3343 * \brief Create a copy of the given object
3345 GEOM_Object MakeCopy (in GEOM_Object theOriginal);
3348 * \brief Export the given shape into a file with given name.
3349 * \param theObject Shape to be stored in the file.
3350 * \param theFileName Name of the file to store the given shape in.
3351 * \param theFormatName Specify format for the shape storage.
3352 * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
3354 void Export (in GEOM_Object theObject, in string theFileName, in string theFormatName);
3357 * \brief Import a shape from the BRep or IGES or STEP file
3358 * (depends on given format) with given name.
3359 * \param theFileName The file, containing the shape.
3360 * \param theFormatName Specify format for the file reading.
3361 * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
3362 * If format 'IGES_SCALE' is used instead of 'IGES' or
3363 * format 'STEP_SCALE' is used instead of 'STEP',
3364 * file length unit will be ignored (set to 'meter') and result model will be scaled.
3365 * \return New GEOM_Object, containing the imported shape.
3367 GEOM_Object ImportFile (in string theFileName, in string theFormatName);
3370 * \brief Read a value of parameter from a file, containing a shape.
3371 * \param theFileName The file, containing the shape.
3372 * \param theFormatName Specify format for the file reading.
3373 * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
3374 * \param theParameterName Specify the parameter. For example, pass "LEN_UNITS"
3375 * to obtain length units, in which the file is written.
3376 * \return Value of requested parameter in form of text string.
3378 string ReadValue (in string theFileName, in string theFormatName, in string theParameterName);
3381 * \brief Get the supported import formats and corresponding patterns for File dialog.
3382 * \param theFormats Output. List of formats, available for import.
3383 * \param thePatterns Output. List of file patterns, corresponding to available formats.
3384 * \return Returns available formats and patterns through the arguments.
3386 void ImportTranslators (out string_array theFormats,
3387 out string_array thePatterns);
3390 * \brief Get the supported export formats and corresponding patterns for File dialog.
3391 * \param theFormats Output. List of formats, available for export.
3392 * \param thePatterns Output. List of file patterns, corresponding to available formats.
3393 * \return Returns available formats and patterns through the arguments.
3395 void ExportTranslators (out string_array theFormats,
3396 out string_array thePatterns);
3399 * \brief Read a shape from the binary stream, containing its bounding representation (BRep).
3400 * \note GEOM_Object::GetShapeStream() method can be used to obtain the shape's BRep stream.
3401 * \param theStream The BRep binary stream.
3402 * \return New GEOM_Object, containing the shape, read from theStream.
3404 GEOM_Object RestoreShape (in SALOMEDS::TMPFile theStream);
3407 * \brief Load texture from file
3408 * \param theTextureFile texture file name
3409 * \return unique texture identifier
3411 long LoadTexture(in string theTextureFile);
3414 * \brief Add texture to the study
3415 * \param theWidth texture width in pixels
3416 * \param theHeight texture height in pixels
3417 * \param theTexture texture byte array
3418 * \return unique texture identifier
3420 long AddTexture(in long theWidth, in long theHeight, in SALOMEDS::TMPFile theTexture);
3423 * \brief Get previously loaded texture data
3424 * \param theID texture identifier
3425 * \param theWidth texture width in pixels
3426 * \param theHeight texture height in pixels
3427 * \return texture byte array
3429 SALOMEDS::TMPFile GetTexture(in long theID, out long theWidth, out long theHeight);
3432 * \brief Get list of all avaiable texture IDs
3433 * \return list of all texture IDs avaiable for the current study
3435 ListOfLong GetAllTextures();
3438 // # GEOM_IKindOfShape:
3440 * \brief Interface for shape_kind enumeration.
3442 interface GEOM_IKindOfShape
3456 /*! box with faces, parallel to global coordinate planes */
3464 /*! solid, bounded by polygons */
3469 /*! spherical face (closed) */
3471 /*! cylindrical face with defined height */
3473 /*! toroidal face (closed) */
3475 /*! conical face with defined height */
3477 /*! planar, bounded by circle */
3479 /*! planar, bounded by ellipse */
3481 /*! planar, bounded by segments */
3483 /*! infinite planar */
3492 /*! arc of circle */
3496 /*! arc of ellipse */
3498 /*! infinite segment */
3507 /*! all advanced shapes (temporary implementation) */
3512 // # GEOM_IMeasureOperations:
3514 * \brief Interface for measurement (distance, whatis) and
3515 * properties calculation (like Centre of Mass, Inertia, etc.).
3518 interface GEOM_IMeasureOperations : GEOM_IOperations
3521 * \brief Get kind of theShape.
3522 * \param theShape Shape to get a kind of.
3523 * \param theIntegers Output. Integer and enumerated shape's parameters
3524 * (kind of surface, closed/unclosed, number of edges, etc.)
3525 * \param theDoubles Output. Double shape's parameters (coordinates, dimensions, etc.)
3526 * \note Concrete meaning of each value, returned via \a theIntegers
3527 * or \a theDoubles list depends on the kind of the shape.
3528 * \return Returns a kind of shape in terms of <VAR>GEOM_IKindOfShape.shape_kind</VAR> enumeration.
3530 //short KindOfShape (in GEOM_Object theShape,
3531 GEOM_IKindOfShape::shape_kind KindOfShape (in GEOM_Object theShape,
3532 out ListOfLong theIntegers,
3533 out ListOfDouble theDoubles);
3536 * \brief Get position (LCS) of theShape.
3537 * \param theShape Shape to calculate position of.
3538 * \param Ox,Oy,Oz Output. Coordinates of shape's location origin.
3539 * Origin of the LCS is situated at the shape's center of mass.
3540 * \param Zx,Zy,Zz Output. Coordinates of shape's location normal(main) direction.
3541 * \param Xx,Xy,Xz Output. Coordinates of shape's location X direction.
3542 * Axes of the LCS are obtained from shape's location or,
3543 * if the shape is a planar face, from position of its plane.
3544 * \return Returns position of the shape through the last nine arguments.
3546 void GetPosition (in GEOM_Object theShape,
3547 out double Ox, out double Oy, out double Oz,
3548 out double Zx, out double Zy, out double Zz,
3549 out double Xx, out double Xy, out double Xz);
3552 * \brief Get summarized length of all wires,
3553 * area of surface and volume of the given shape.
3554 * \param theShape Shape to define properties of.
3555 * \param theLength Output. Summarized length of all wires of the given shape.
3556 * \param theSurfArea Output. Area of surface of the given shape.
3557 * \param theVolume Output. Volume of the given shape.
3558 * \return Returns shape properties through the last three arguments.
3560 void GetBasicProperties (in GEOM_Object theShape,
3561 out double theLength,
3562 out double theSurfArea,
3563 out double theVolume);
3566 * \brief Get a point, situated at the centre of mass of theShape.
3567 * \param theShape Shape to define centre of mass of.
3568 * \return New GEOM_Object, containing the created point.
3570 GEOM_Object GetCentreOfMass (in GEOM_Object theShape);
3573 * Get the vertex by index for 1D objects depends the edge/wire orientation
3574 * \param theShape Shape (wire or edge) to find the vertex on it
3575 * \param theIndex Index of vertex sub-shape
3576 * \return New GEOM_Object, vertex.
3578 GEOM_Object GetVertexByIndex( in GEOM_Object theShape, in long index );
3581 * \brief Get a vector, representing the normal of theFace.
3582 * If the face is not planar, theOptionalPoint is obligatory.
3583 * \param theFace Shape (face) to define the normal of.
3584 * \param theOptionalPoint Shape (point) to define the normal at.
3585 * Can be NULL in case of planar face.
3586 * \return New GEOM_Object, containing the created normal vector.
3588 GEOM_Object GetNormal (in GEOM_Object theFace,
3589 in GEOM_Object theOptionalPoint);
3592 * \brief Get inertia matrix and moments of inertia of theShape.
3593 * \param theShape Shape to calculate inertia of.
3594 * \param I11,I12,I13,I21,I22,I23,I31,I32,I33 Output. Components of the inertia matrix of the given shape.
3595 * \param Ix,Iy,Iz Output. Moments of inertia of the given shape.
3596 * \return Returns inertia through the last twelve arguments.
3598 void GetInertia (in GEOM_Object theShape,
3599 out double I11, out double I12, out double I13,
3600 out double I21, out double I22, out double I23,
3601 out double I31, out double I32, out double I33,
3602 out double Ix , out double Iy , out double Iz);
3605 * \brief Get parameters of bounding box of the given shape
3606 * \param theShape Shape to obtain bounding box of.
3607 * \param Xmin,Xmax Output. Limits of shape along OX axis.
3608 * \param Ymin,Ymax Output. Limits of shape along OY axis.
3609 * \param Zmin,Zmax Output. Limits of shape along OZ axis.
3610 * \return Returns parameters of bounding box through the last six arguments.
3612 void GetBoundingBox (in GEOM_Object theShape,
3613 out double Xmin, out double Xmax,
3614 out double Ymin, out double Ymax,
3615 out double Zmin, out double Zmax);
3618 * \brief Get bounding box of the given shape
3619 * \param theShape Shape to obtain bounding box of.
3620 * \return New GEOM_Object, containing the created bounding box.
3622 GEOM_Object MakeBoundingBox (in GEOM_Object theShape);
3625 * \brief Get min and max tolerances of sub-shapes of theShape
3626 * \param theShape Shape, to get tolerances of.
3627 * \param FaceMin,FaceMax Output. Min and max tolerances of the faces.
3628 * \param EdgeMin,EdgeMax Output. Min and max tolerances of the edges.
3629 * \param VertMin,VertMax Output. Min and max tolerances of the vertices.
3630 * \return Returns shape tolerances through the last six arguments.
3632 void GetTolerance (in GEOM_Object theShape,
3633 out double FaceMin, out double FaceMax,
3634 out double EdgeMin, out double EdgeMax,
3635 out double VertMin, out double VertMax);
3638 * \brief Check a topology of the given shape.
3639 * \param theShape Shape to check validity of.
3640 * \param theDescription Output. Description of problems in the shape, if they are.
3641 * \return TRUE, if the shape "seems to be valid" from the topological point of view.
3643 boolean CheckShape (in GEOM_Object theShape,
3644 out string theDescription);
3647 * \brief Check a topology and a geometry of the given shape.
3648 * \param theShape Shape to check validity of.
3649 * \param theDescription Output. Description of problems in the shape, if they are.
3650 * \return TRUE, if the shape "seems to be valid".
3652 boolean CheckShapeWithGeometry (in GEOM_Object theShape,
3653 out string theDescription);
3656 * \brief Check a topology of the given shape on self-intersections presence.
3657 * \param theShape Shape to check validity of.
3658 * \param theIntersections Output. List of intersected sub-shapes IDs, it contains pairs of IDs.
3659 * \return TRUE, if the shape does not have any self-intersections.
3661 boolean CheckSelfIntersections (in GEOM_Object theShape,
3662 out ListOfLong theIntersections);
3665 * \brief Check if the given shape can be an argument for MakeSolid operation
3666 * \param theShape Shape to be described.
3667 * \return Empty string if a solid can be made on this shape, error code otherwise.
3669 string IsGoodForSolid (in GEOM_Object theShape);
3672 * O\brief btain description of the given shape
3673 * \param theShape Shape to be described.
3674 * \return Description of the given shape.
3676 string WhatIs (in GEOM_Object theShape);
3679 * \brief Check if points defined by coords = [x1, y1, z1, x2, y2, z2, ...] are inside or on
3680 * the shape theShape.
3681 * \param theShape Shape to check.
3682 * \param coords list of coordinates.
3683 * \param tolerance tolerance.
3684 * \return list of boolean.
3686 ListOfBool AreCoordsInside(in GEOM_Object theShape, in ListOfDouble coords, in double tolerance);
3689 * \brief Get minimal distance between the given shapes.
3690 * \param theShape1,theShape2 Shapes to find minimal distance between.
3691 * \param X1,Y1,Z1 Output. Coordinates of point on theShape1, nearest to theShape2.
3692 * \param X2,Y2,Z2 Output. Coordinates of point on theShape2, nearest to theShape1.
3693 * \return Value of the minimal distance between the given shapes.
3695 double GetMinDistance (in GEOM_Object theShape1, in GEOM_Object theShape2,
3696 out double X1, out double Y1, out double Z1,
3697 out double X2, out double Y2, out double Z2);
3700 * \brief Get closest points of the given shapes.
3701 * \param theShape1,theShape2 Shapes to find closest points of.
3702 * \param theCoords Output. List of (X, Y, Z) coordinates for all couples of points.
3703 * \return The number of found solutions (-1 in case of infinite number of solutions).
3705 long ClosestPoints (in GEOM_Object theShape1,
3706 in GEOM_Object theShape2,
3707 out ListOfDouble theCoords);
3710 * \brief Get angle between the given lines or linear edges.
3711 * \param theShape1,theShape2 Shapes to find angle between. Lines or linear edges.
3712 * \return Value of the angle between the given shapes.
3714 double GetAngle (in GEOM_Object theShape1, in GEOM_Object theShape2);
3717 * \brief Get angle between the given vectors.
3718 * \param theShape1,theShape2 Vectors to find angle between.
3719 * \return Value of the angle between the given vectors.
3721 double GetAngleBtwVectors (in GEOM_Object theShape1, in GEOM_Object theShape2);
3724 * \brief Get point coordinates
3726 void PointCoordinates (in GEOM_Object theShape, out double X, out double Y, out double Z);
3729 * \brief Get radius of curvature of curve in the point determinated by param
3730 * \param theShape - curve.
3731 * \param theParam - parameter on curve
3732 * \return Value of curvature.
3734 double CurveCurvatureByParam (in GEOM_Object theShape, in double theParam);
3737 * \brief Get radius of curvature of curve in the given point
3738 * \param theShape - curve.
3739 * \param thePoint - point
3740 * \return Value of curvature.
3742 double CurveCurvatureByPoint (in GEOM_Object theShape, in GEOM_Object thePoint);
3745 * \brief Get max radius of curvature of surface in the point determinated by params
3746 * \param theShape - surface.
3747 * \param theUParam - U-parameter on surface
3748 * \param theVParam - V-parameter on surface
3749 * \return Value of curvature.
3751 double MaxSurfaceCurvatureByParam (in GEOM_Object theShape, in double theUParam,
3752 in double theVParam);
3755 * \brief Get max radius of curvature of surface in the given point
3756 * \param theShape - surface.
3757 * \param thePoint - point
3758 * \return Value of curvature.
3760 double MaxSurfaceCurvatureByPoint (in GEOM_Object theShape, in GEOM_Object thePoint);
3763 * \brief Get min radius of curvature of surface in the point determinated by params
3764 * \param theShape - surface.
3765 * \param theUParam - U-parameter on surface
3766 * \param theVParam - V-parameter on surface
3767 * \return Value of curvature.
3769 double MinSurfaceCurvatureByParam (in GEOM_Object theShape, in double theUParam,
3770 in double theVParam);
3773 * \brief Get min radius of curvature of surface in the given point
3774 * \param theShape - surface.
3775 * \param thePoint - point
3776 * \return Value of curvature.
3778 double MinSurfaceCurvatureByPoint (in GEOM_Object theShape, in GEOM_Object thePoint);
3782 // # GEOM_IGroupOperations:
3784 * \brief Interface for groups creation.
3786 interface GEOM_IGroupOperations : GEOM_IOperations
3789 * \brief Creates a new group which will store sub-shapes of theMainShape
3790 * \param theMainShape is a GEOM_Object on which the group is selected
3791 * \param theShapeType defines a shape type of the group
3792 * \return a newly created GEOM group
3794 GEOM_Object CreateGroup (in GEOM_Object theMainShape, in long theShapeType);
3797 * \brief Adds a sub-object with ID theSubShapeId to the group
3798 * \param theGroup is a GEOM group to which the new sub-shape is added
3799 * \param theSubShapeId is a sub-shape ID in the main object.
3800 * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub-shape
3802 void AddObject (in GEOM_Object theGroup, in long theSubShapeId);
3805 * \brief Removes a sub-object with ID \a theSubShapeId from the group
3806 * \param theGroup is a GEOM group from which the sub-shape is removed.
3807 * \param theSubShapeId is a sub-shape ID in the main object.
3808 * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub-shape
3810 void RemoveObject (in GEOM_Object theGroup, in long theSubShapeId);
3813 * \brief Adds to the group all the given shapes. No errors, if some shapes are alredy included.
3814 * \param theGroup is a GEOM group to which the new sub-shapes are added.
3815 * \param theSubShapes is a list of sub-shapes to be added.
3817 void UnionList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
3820 * \brief Removes from the group all the given shapes. No errors, if some shapes are not included.
3821 * \param theGroup is a GEOM group from which the sub-shapes are removed.
3822 * \param theSubShapes is a list of sub-shapes to be removed.
3824 void DifferenceList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
3827 * \brief Adds to the group all the given shapes. No errors, if some shapes are alredy included.
3828 * \param theGroup is a GEOM group to which the new sub-shapes are added.
3829 * \param theSubShapes is a list of IDs of sub-shapes to be added.
3831 void UnionIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
3834 * \brief Removes from the group all the given shapes. No errors, if some shapes are not included.
3835 * \param theGroup is a GEOM group from which the sub-shapes are removed.
3836 * \param theSubShapes is a list of IDs of sub-shapes to be removed.
3838 void DifferenceIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
3841 * \brief Union of two groups.
3842 * New group is created. It will contain all entities
3843 * which are present in groups theGroup1 and theGroup2.
3844 * \param theGroup1, theGroup2 are the initial GEOM groups
3845 * to create the united group from.
3846 * \return a newly created GEOM group.
3848 GEOM_Object UnionGroups (in GEOM_Object theGroup1, in GEOM_Object theGroup2);
3851 * \brief Intersection of two groups.
3852 * New group is created. It will contain only those entities
3853 * which are present in both groups theGroup1 and theGroup2.
3854 * \param theGroup1, theGroup2 are the initial GEOM groups to get common part of.
3855 * \return a newly created GEOM group.
3857 GEOM_Object IntersectGroups (in GEOM_Object theGroup1, in GEOM_Object theGroup2);
3860 * \brief Cut of two groups.
3861 * New group is created. It will contain entities which are
3862 * present in group theGroup1 but are not present in group theGroup2.
3863 * \param theGroup1 is a GEOM group to include elements of.
3864 * \param theGroup2 is a GEOM group to exclude elements of.
3865 * \return a newly created GEOM group.
3867 GEOM_Object CutGroups (in GEOM_Object theGroup1, in GEOM_Object theGroup2);
3870 * \brief Union of list of groups.
3871 * New group is created. It will contain all entities that are
3872 * present in groups listed in theGList.
3873 * \param theGList is a list of GEOM groups to create the united group from.
3874 * \return a newly created GEOM group.
3876 GEOM_Object UnionListOfGroups (in ListOfGO theGList);
3879 * \brief Intersection of list of groups.
3880 * New group is created. It will contain only entities
3881 * which are simultaneously present in the groups listed in theGList.
3882 * \param theGList is a list of GEOM groups to get common part of.
3883 * \return a newly created GEOM group.
3885 GEOM_Object IntersectListOfGroups (in ListOfGO theGList);
3888 * \brief Cut of lists of groups.
3889 * New group is created. It will contain only entities
3890 * which are present in groups listed in theGList1 but
3891 * are not present in groups from theGList2.
3892 * \param theGList1 is a list of GEOM groups to include elements of.
3893 * \param theGList2 is a list of GEOM groups to exclude elements of.
3894 * \return a newly created GEOM group.
3896 GEOM_Object CutListOfGroups (in ListOfGO theGList1,
3897 in ListOfGO theGList2);
3900 * \brief Returns a type of sub-objects stored in the group
3901 * \param theGroup is a GEOM group which type is returned.
3903 long GetType (in GEOM_Object theGroup);
3906 * \brief Returns a main shape associated with the group
3907 * \param theGroup is a GEOM group for which a main shape object is requested
3908 * \return a GEOM_Object which is a main shape for theGroup
3910 GEOM_Object GetMainShape (in GEOM_Object theGroup);
3913 * \brief Returns a list of sub-objects ID stored in the group
3914 * \param theGroup is a GEOM group for which a list of IDs is requested
3916 ListOfLong GetObjects (in GEOM_Object theGroup);
3919 // # GEOM_IAdvancedOperations:
3921 * \brief Interface for advanced modeling functions.
3923 interface GEOM_IAdvancedOperations : GEOM_IOperations
3926 * \brief Create a T-shape object with specified caracteristics for the main and
3927 * the incident pipes (radius, width, half-length).
3929 * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
3930 * \param theR1 Internal radius of main pipe
3931 * \param theW1 Width of main pipe
3932 * \param theL1 Half-length of main pipe
3933 * \param theR2 Internal radius of incident pipe (R2 < R1)
3934 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
3935 * \param theL2 Half-length of incident pipe
3936 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
3937 * \return List of GEOM_Object, containing the created shape and propagation groups.
3939 ListOfGO MakePipeTShape (in double theR1, in double theW1, in double theL1,
3940 in double theR2, in double theW2, in double theL2,
3941 in boolean theHexMesh);
3943 * \brief Create a T-shape object with specified caracteristics for the main and
3944 * the incident pipes (radius, width, half-length).
3946 * The extremities of the main pipe are located on junctions points P1 and P2.
3947 * The extremity of the incident pipe is located on junction point P3.
3948 * \param theR1 Internal radius of main pipe
3949 * \param theW1 Width of main pipe
3950 * \param theL1 Half-length of main pipe
3951 * \param theR2 Internal radius of incident pipe (R2 < R1)
3952 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
3953 * \param theL2 Half-length of incident pipe
3954 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
3955 * \param theP1 1st junction point of main pipe
3956 * \param theP2 2nd junction point of main pipe
3957 * \param theP3 Junction point of incident pipe
3958 * \return List of GEOM_Object, containing the created shape and propagation groups.
3960 ListOfGO MakePipeTShapeWithPosition (in double theR1, in double theW1, in double theL1,
3961 in double theR2, in double theW2, in double theL2,
3962 in boolean theHexMesh,
3963 in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
3965 * \brief Create a T-shape object with specified caracteristics for the main and
3966 * the incident pipes (radius, width, half-length). A chamfer is created
3967 * on the junction of the pipes.
3969 * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
3970 * \param theR1 Internal radius of main pipe
3971 * \param theW1 Width of main pipe
3972 * \param theL1 Half-length of main pipe
3973 * \param theR2 Internal radius of incident pipe (R2 < R1)
3974 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
3975 * \param theL2 Half-length of incident pipe
3976 * \param theH Height of the chamfer.
3977 * \param theW Width of the chamfer.
3978 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
3979 * \return List of GEOM_Object, containing the created shape and propagation groups.
3981 ListOfGO MakePipeTShapeChamfer (in double theR1, in double theW1, in double theL1,
3982 in double theR2, in double theW2, in double theL2,
3983 in double theH, in double theW, in boolean theHexMesh);
3985 * \brief Create a T-shape object with specified caracteristics for the main and
3986 * the incident pipes (radius, width, half-length).
3988 * A chamfer is created on the junction of the pipes.
3989 * The extremities of the main pipe are located on junctions points P1 and P2.
3990 * The extremity of the incident pipe is located on junction point P3.
3991 * \param theR1 Internal radius of main pipe
3992 * \param theW1 Width of main pipe
3993 * \param theL1 Half-length of main pipe
3994 * \param theR2 Internal radius of incident pipe (R2 < R1)
3995 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
3996 * \param theL2 Half-length of incident pipe
3997 * \param theH Height of the chamfer.
3998 * \param theW Width of the chamfer.
3999 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
4000 * \param theP1 1st junction point of main pipe
4001 * \param theP2 2nd junction point of main pipe
4002 * \param theP3 Junction point of incident pipe
4003 * \return List of GEOM_Object, containing the created shape and propagation groups.
4005 ListOfGO MakePipeTShapeChamferWithPosition (in double theR1, in double theW1, in double theL1,
4006 in double theR2, in double theW2, in double theL2,
4007 in double theH, in double theW, in boolean theHexMesh,
4008 in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
4010 * \brief Create a T-shape object with specified caracteristics for the main and
4011 * the incident pipes (radius, width, half-length).
4013 * A fillet is created on the junction of the pipes.
4014 * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
4015 * \param theR1 Internal radius of main pipe
4016 * \param theW1 Width of main pipe
4017 * \param theL1 Half-length of main pipe
4018 * \param theR2 Internal radius of incident pipe (R2 < R1)
4019 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
4020 * \param theL2 Half-length of incident pipe
4021 * \param theRF Radius of curvature of fillet.
4022 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
4023 * \return List of GEOM_Object, containing the created shape and propagation groups.
4025 ListOfGO MakePipeTShapeFillet (in double theR1, in double theW1, in double theL1,
4026 in double theR2, in double theW2, in double theL2,
4027 in double theRF, in boolean theHexMesh);
4029 * \brief Create a T-shape object with specified caracteristics for the main and
4030 * the incident pipes (radius, width, half-length).
4032 * A fillet is created on the junction of the pipes.
4033 * The extremities of the main pipe are located on junctions points P1 and P2.
4034 * The extremity of the incident pipe is located on junction point P3.
4035 * \param theR1 Internal radius of main pipe
4036 * \param theW1 Width of main pipe
4037 * \param theL1 Half-length of main pipe
4038 * \param theR2 Internal radius of incident pipe (R2 < R1)
4039 * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
4040 * \param theL2 Half-length of incident pipe
4041 * \param theRF Radius of curvature of fillet.
4042 * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
4043 * \param theP1 1st junction point of main pipe
4044 * \param theP2 2nd junction point of main pipe
4045 * \param theP3 Junction point of incident pipe
4046 * \return List of GEOM_Object, containing the created shape and propagation groups.
4048 ListOfGO MakePipeTShapeFilletWithPosition (in double theR1, in double theW1, in double theL1,
4049 in double theR2, in double theW2, in double theL2,
4050 in double theRF, in boolean theHexMesh,
4051 in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
4053 * This function allows to create a disk already divided into blocks. It
4054 * can be use to create divided pipes for later meshing in hexaedra.
4055 * \param theR Radius of the disk
4056 * \param theRatio Relative size of the central square diagonal against the disk diameter
4057 * \param theOrientation Plane on which the disk will be built
4058 * \return New GEOM_Object, containing the created shape.
4060 GEOM_Object MakeDividedDisk (in double theR,
4062 in short theOrientation,
4063 in pattern thePattern);
4066 * \brief Create a Disk prepared for hexa meshing with given center, normal vector and radius.
4067 * \param thePnt disk center.
4068 * \param theVec Vector, normal to the plane of the disk.
4069 * \param theR Disk radius.
4070 * \param theRatio Relative size of the central square diagonal against the disk diameter
4071 * \return New GEOM_Object, containing the created disk.
4073 GEOM_Object MakeDividedDiskPntVecR ( in GEOM_Object thePnt,
4074 in GEOM_Object theVec,
4077 in pattern thePattern);
4080 * Builds a cylinder prepared for hexa meshes
4081 * \param theR Radius of the cylinder
4082 * \param theH Height of the cylinder
4083 * \return New GEOM_Object, containing the created shape.
4085 GEOM_Object MakeDividedCylinder (in double theR,
4087 in pattern thePattern );
4089 /*@@ insert new functions before this line @@ do not remove this line @@*/
4094 * \brief Interface to access other GEOM interfaces.
4096 * Also contains some methods to access and manage GEOM_Object.
4098 interface GEOM_Gen : Engines::EngineComponent,SALOMEDS::Driver
4101 * \brief Undo/Redo Management
4104 void Undo (in long theStudyID);
4106 void Redo (in long theStudyID);
4109 * \brief Publishing management
4111 * Adds in theStudy a object theObject under with a name theName,
4112 * if theFather is not NULL the object is placed under thFather's SObject.
4113 * Returns a SObject where theObject is placed
4115 SALOMEDS::SObject AddInStudy (in SALOMEDS::Study theStudy,
4116 in GEOM_Object theObject,
4118 in GEOM_Object theFather);
4121 * \brief Publish sub-shapes, standing for arguments and sub-shapes of arguments
4123 * To be used from python scripts out of geompy.addToStudy (non-default usage)
4124 * \param theStudy the study, in which theObject is published already,
4125 * and in which the arguments will be published
4126 * \param theObject published GEOM_Object, arguments of which will be published
4127 * \param theArgs list of GEOM_Object, operation arguments to be published.
4128 * If this list is empty, all operation arguments will be published
4129 * \param theFindMethod method to search sub-shapes, corresponding to arguments and
4130 * their sub-shapes. Value from enumeration GEOM::find_shape_method.
4131 * \param theInheritFirstArg set properties of the first argument for \a theObject.
4132 * Do not publish sub-shapes in place of arguments, but only
4133 * in place of sub-shapes of the first argument,
4134 * because the whole shape corresponds to the first argument.
4135 * Mainly to be used after transformations, but it also can be
4136 * usefull after partition with one object shape, and some other
4137 * operations, where only the first argument has to be considered.
4138 * If theObject has only one argument shape, this flag is automatically
4139 * considered as True, not regarding really passed value.
4140 * \param theAddPrefix add prefix "from_" to names of restored sub-shapes,
4141 * and prefix "from_subshapes_of_" to names of partially restored sub-shapes.
4142 * \return list of published sub-shapes
4144 ListOfGO RestoreSubShapesO (in SALOMEDS::Study theStudy,
4145 in GEOM_Object theObject,
4146 in ListOfGO theArgs,
4147 in find_shape_method theFindMethod,
4148 in boolean theInheritFirstArg,
4149 in boolean theAddPrefix);
4152 * \brief Publish sub-shapes, standing for arguments and sub-shapes of arguments
4154 * To be used from python scripts out of geompy.addToStudy (non-default usage)
4155 * \param theStudy the study, in which theObject is published already,
4156 * and in which the arguments will be published
4157 * \param theObject published GEOM_Object, arguments of which will be published
4158 * \param theArgs list of GEOM_Object, operation arguments to be published.
4159 * If this list is empty, all operation arguments will be published
4160 * \param theFindMethod method to search sub-shapes, corresponding to arguments and
4161 * their sub-shapes. Value from enumeration GEOM::find_shape_method.
4162 * \param theInheritFirstArg set properties of the first argument for \a theObject.
4163 * Do not publish sub-shapes in place of arguments, but only
4164 * in place of sub-shapes of the first argument,
4165 * because the whole shape corresponds to the first argument.
4166 * Mainly to be used after transformations, but it also can be
4167 * usefull after partition with one object shape, and some other
4168 * operations, where only the first argument has to be considered.
4169 * If theObject has only one argument shape, this flag is automatically
4170 * considered as True, not regarding really passed value.
4171 * \param theAddPrefix add prefix "from_" to names of restored sub-shapes,
4172 * and prefix "from_subshapes_of_" to names of partially restored sub-shapes.
4173 * \return list of published sub-shapes
4175 ListOfGO RestoreGivenSubShapesO (in SALOMEDS::Study theStudy,
4176 in GEOM_Object theObject,
4177 in ListOfGO theArgs,
4178 in find_shape_method theFindMethod,
4179 in boolean theInheritFirstArg,
4180 in boolean theAddPrefix);
4183 * \brief Publish sub-shapes, standing for arguments and sub-shapes of arguments
4185 * To be used from GUI and from geompy.addToStudy.
4186 * Work like the above method, but accepts study object theSObject instead of GEOM_Object.
4187 * \param theStudy the study, in which theObject is published already,
4188 * and in which the arguments will be published
4189 * \param theSObject study object, referencing GEOM_Object, arguments of which will be published
4190 * \param theArgs list of GEOM_Object, operation arguments to be published.
4191 * If this list is empty, all operation arguments will be published
4192 * \param theFindMethod method to search sub-shapes, corresponding to arguments and
4193 * their sub-shapes. Value from enumeration GEOM::find_shape_method.
4194 * \param theInheritFirstArg set properties of the first argument for \a theObject.
4195 * Do not publish sub-shapes in place of arguments, but only
4196 * in place of sub-shapes of the first argument,
4197 * because the whole shape corresponds to the first argument.
4198 * Mainly to be used after transformations, but it also can be
4199 * usefull after partition with one object shape, and some other
4200 * operations, where only the first argument has to be considered.
4201 * If theObject has only one argument shape, this flag is automatically
4202 * considered as True, not regarding really passed value.
4203 * \param theAddPrefix add prefix "from_" to names of restored sub-shapes,
4204 * and prefix "from_subshapes_of_" to names of partially restored sub-shapes.
4206 ListOfGO RestoreSubShapesSO (in SALOMEDS::Study theStudy,
4207 in SALOMEDS::SObject theSObject,
4208 in ListOfGO theArgs,
4209 in find_shape_method theFindMethod,
4210 in boolean theInheritFirstArg,
4211 in boolean theAddPrefix);
4213 // # Methods to access interfaces for objects creation and transformation
4215 GEOM_IBasicOperations GetIBasicOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4216 GEOM_ITransformOperations GetITransformOperations(in long theStudyID) raises (SALOME::SALOME_Exception);
4217 GEOM_I3DPrimOperations GetI3DPrimOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4218 GEOM_IShapesOperations GetIShapesOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4219 GEOM_IBooleanOperations GetIBooleanOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4220 GEOM_ICurvesOperations GetICurvesOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4221 GEOM_ILocalOperations GetILocalOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4222 GEOM_IHealingOperations GetIHealingOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4223 GEOM_IInsertOperations GetIInsertOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4224 GEOM_IMeasureOperations GetIMeasureOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4225 GEOM_IBlocksOperations GetIBlocksOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4226 GEOM_IGroupOperations GetIGroupOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4227 GEOM_IAdvancedOperations GetIAdvancedOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
4229 // # Objects Management
4233 * \brief Removes the object from the GEOM component
4234 * \param theObject is a GEOM_Object to be removed
4236 void RemoveObject (in GEOM_Object theObject);
4239 * \brief Returns an object defined by the study and its entry in the GEOM component
4240 * \param theStudyID is a SALOMEDS Study ID
4241 * \param theEntry is an entry of the requested GEOM_Object in the GEOM component
4242 * \note if the object has not previously been created a NULL GEOM_Object is returned
4244 GEOM_Object GetObject (in long theStudyID, in string theEntry);
4247 * \brief Add a sub-shape defined by indices in \a theIndices
4248 * (contains unique IDs of sub-shapes inside \a theMainShape)
4249 * \note The sub-shape GEOM_Object can has ONLY ONE function.
4250 * Don't try to apply modification operations on them.
4251 * \note Internal method
4253 GEOM_Object AddSubShape (in GEOM_Object theMainShape, in ListOfLong theIndices);
4255 // # GEOM_Objects IOR Management
4258 * \brief Returns a GEOM_Object defined by its IOR
4259 * \param theIOR a string containg an IOR of the requested GEOM_Object
4261 GEOM_Object GetIORFromString (in string theIOR);
4264 * \brief Returns a string which contains an IOR of the GEOM_Object
4265 * \param theObject is a GEOM_Object which IOR is requested
4267 string GetStringFromIOR (in GEOM_Object theObject);
4270 * \brief Returns a name with which a GEOM_Object was dumped into python script
4271 * \param theStudyEntry is an entry of the GEOM_Object in the study
4273 string GetDumpName (in string theStudyEntry);
4276 * \brief Returns all names with which a GEOM_Object was dumped
4277 * into python script to avoid the same names in SMESH script
4279 string_array GetAllDumpNames();
4282 * \brief Publishes the named sub-shapes of given object in the study.
4283 * \param theStudy The study in which the object is published
4284 * \param theObject The object which named sub-shapes are published
4286 ListOfGO PublishNamedShapesInStudy(in SALOMEDS::Study theStudy,
4287 //in SObject theSObject,
4288 in Object theObject);