1 // Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
2 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
4 // This library is free software; you can redistribute it and/or
5 // modify it under the terms of the GNU Lesser General Public
6 // License as published by the Free Software Foundation; either
7 // version 2.1 of the License.
9 // This library is distributed in the hope that it will be useful
10 // but WITHOUT ANY WARRANTY; without even the implied warranty of
11 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 // Lesser General Public License for more details.
14 // You should have received a copy of the GNU Lesser General Public
15 // License along with this library; if not, write to the Free Software
16 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 // File : GEOM_Gen.idl
21 // Author : Sergey RUIN
26 #include "SALOME_Exception.idl"
27 #include "SALOME_Component.idl"
28 #include "SALOMEDS.idl"
29 #include "SALOMEDS_Attributes.idl"
31 #include "SALOME_GenericObj.idl"
36 * Topological types of shapes (like Open Cascade types)
38 enum shape_type { COMPOUND, COMPSOLID, SOLID, SHELL,
39 FACE, WIRE, EDGE, VERTEX, SHAPE };
43 * State of shape relatively geometrical surface like plane, sphere or cylinder.
44 * Is used in functions GEOM_IShapesOperations.GetShapesOn<xxx>()
48 /*! Shape is on surface */
52 * Shape is in the direction defined by the normal and not on surface.
53 * For plane it means above the plane,
54 * For sphere and cylinder it means outside of volume, bounded by the surface.
59 * Shape is in the direction defined by the normal and on surface.
65 * Complementary to ONOUT.
66 * For plane it means below the plane,
67 * For sphere and cylinder it means inside the volume, bounded by the surface
68 * (beyond axis and surface for cylinder and beyond cented and surface for sphere).
73 * Complementary to OUT.
79 typedef sequence<string> string_array;
80 typedef sequence<short> short_array;
81 typedef sequence<long> ListOfLong;
82 typedef sequence<double> ListOfDouble;
84 interface GEOM_Object;
86 typedef sequence<GEOM_Object> ListOfGO;
89 * GEOM_Object: interface of geometric object
91 interface GEOM_Object : SALOME::GenericObj
95 * Get an entry of the object in GEOM component.
100 * Get ID of study, where the object is created.
105 * Get internal type of the object (POINT, BOX, CYLINDER, EXTRUSION...).
110 * Get a <VAR>shape_type</VAR> of the object value.
112 shape_type GetShapeType();
115 * Set name of the object.
116 * \param theName is a name which will be associated with this object.
118 void SetName (in string theName);
121 * Get name of the object associated with this object.
126 * Set color of the object.
127 * \param theColor is a color of the object.
129 void SetColor(in SALOMEDS::Color theColor);
132 * Get color of the object.
134 SALOMEDS::Color GetColor();
137 * Toggle auto color mode on the object.
138 * \param theAtoColor is a flag which toggles auto color mode.
140 void SetAutoColor(in boolean theAutoColor);
143 * Get flag of object's auto color mode.
145 boolean GetAutoColor();
148 * Set a Study entry where this object was published.
150 void SetStudyEntry (in string theEntry);
153 * Get a Study entry where this object was published.
155 string GetStudyEntry();
158 * Get a list of all GEOM objects on which were the arguments
159 * when this object was constructed and modified.
160 * \note This method is supposed to be used by GUI only.
162 ListOfGO GetDependency();
165 * Get a list of GEOM objects on which the last function that created or modified the object depends.
166 * \note This method is supposed to be used by GUI only.
168 ListOfGO GetLastDependency();
171 * Get the TopoDS_Shape, for colocated case only.
173 long long getShape();
176 ######################################################################
177 * Internal methods (For sub shape identification)
178 ######################################################################
182 * Get geometric shape of the object as a byte stream
184 SALOMEDS::TMPFile GetShapeStream();
187 * Returns True if this object is not a sub shape of another object.
189 boolean IsMainShape();
192 * Get a list of ID's of sub shapes in the main shape.
193 * \note Internal method, suppopsed to be used only by GEOM_Client
195 ListOfLong GetSubShapeIndices();
198 * Get a main shape object to which this object is a sub shape
199 * \note Internal method, suppopsed to be used only by GEOM_Client
201 GEOM_Object GetMainShape();
204 * Return true if geom object representes a shape.
205 * For example, method return false for GEOM_MARKER
212 * GEOM_IOperations: basic methods of all geometric operations
214 interface GEOM_IOperations : SALOME::GenericObj
217 * To know, if the operation was successfully performed
222 * Set the operation error code
223 * \param theErrorID is a string describing the error occured
224 * \note This method is supposed to be used only by interfaces inheriting from IOperations.
226 void SetErrorCode (in string theErrorID);
229 * Get the operation error code
231 string GetErrorCode();
234 * Get ID of study, where the operation is defined
239 * Opens a new transaction
241 void StartOperation();
244 * Closes the previously opened trasaction
246 void FinishOperation();
249 * Aborts the previously opened transaction
251 void AbortOperation();
255 * GEOM_IBasicOperations: interface for basic geometry creation
256 * (Point, Vector, Plane, Marker)
258 interface GEOM_IBasicOperations : GEOM_IOperations
261 * Create point by three coordinates.
262 * \param theX The X coordinate of the point.
263 * \param theY The Y coordinate of the point.
264 * \param theZ The Z coordinate of the point.
265 * \return New GEOM_Object, containing the created point.
267 GEOM_Object MakePointXYZ (in double theX, in double theY, in double theZ);
270 * Create a point, distant from the referenced point
271 * on the given distances along the coordinate axes.
272 * \param theReference The referenced point.
273 * \param theX Displacement from the referenced point along OX axis.
274 * \param theY Displacement from the referenced point along OY axis.
275 * \param theZ Displacement from the referenced point along OZ axis.
276 * \return New GEOM_Object, containing the created point.
278 GEOM_Object MakePointWithReference (in GEOM_Object theReference,
279 in double theX, in double theY, in double theZ);
282 * Create a point, corresponding to the given parameter on the given curve.
283 * \param theRefCurve The referenced curve.
284 * \param theParameter Value of parameter on the referenced curve.
285 * \return New GEOM_Object, containing the created point.
287 GEOM_Object MakePointOnCurve (in GEOM_Object theRefCurve,
288 in double theParameter);
291 * Create a point, on two lines intersection.
292 * \param theRefLine1, theRefLine2 The referenced lines.
293 * \return New GEOM_Object, containing the created point.
295 GEOM_Object MakePointOnLinesIntersection (in GEOM_Object theRefLine1,
296 in GEOM_Object theRefLine2);
299 * Create a vector, corresponding to tangent to the given parameter on the given curve.
300 * \param theRefCurve The referenced curve.
301 * \param theParameter Value of parameter on the referenced curve.This value should be have value
302 * \between 0. and 1.. Value of 0. corresponds first parameter of curve value 1. corresponds
303 * \last parameter of curve.
304 * \return New GEOM_Object, containing the created point.
306 GEOM_Object MakeTangentOnCurve (in GEOM_Object theRefCurve,
307 in double theParameter);
310 * Create a vector with the given components.
311 * \param theDX X component of the vector.
312 * \param theDY Y component of the vector.
313 * \param theDZ Z component of the vector.
314 * \return New GEOM_Object, containing the created vector.
316 GEOM_Object MakeVectorDXDYDZ (in double theDX,
321 * Create a vector between two points.
322 * \param thePnt1 Start point for the vector.
323 * \param thePnt2 End point for the vector.
324 * \return New GEOM_Object, containing the created vector.
326 GEOM_Object MakeVectorTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
329 * Create a line, passing through the given point
330 * and parrallel to the given direction
331 * \param thePnt Point. The resulting line will pass through it.
332 * \param theDir Direction. The resulting line will be parallel to it.
333 * \return New GEOM_Object, containing the created line.
335 GEOM_Object MakeLine (in GEOM_Object thePnt, in GEOM_Object theDir);
338 * Create a line, passing through the given points
339 * \param thePnt1 First of two points, defining the line.
340 * \param thePnt2 Second of two points, defining the line.
341 * \return New GEOM_Object, containing the created line.
343 GEOM_Object MakeLineTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
346 * Create a line, given by two faces intersection.
347 * \param theFace1 First of two faces, defining the line.
348 * \param theFace2 Second of two faces, defining the line.
349 * \return New GEOM_Object, containing the created line.
351 GEOM_Object MakeLineTwoFaces (in GEOM_Object theFace1, in GEOM_Object theFace2);
354 * Create a plane, passing through the three given points
355 * \param thePnt1 First of three points, defining the plane.
356 * \param thePnt2 Second of three points, defining the plane.
357 * \param thePnt3 Fird of three points, defining the plane.
358 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
359 * \return New GEOM_Object, containing the created plane.
361 GEOM_Object MakePlaneThreePnt (in GEOM_Object thePnt1,
362 in GEOM_Object thePnt2,
363 in GEOM_Object thePnt3,
364 in double theTrimSize);
367 * Create a plane, passing through the given point
368 * and normal to the given vector.
369 * \param thePnt Point, the plane has to pass through.
370 * \param theVec Vector, defining the plane normal direction.
371 * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
372 * \return New GEOM_Object, containing the created plane.
374 GEOM_Object MakePlanePntVec (in GEOM_Object thePnt,
375 in GEOM_Object theVec,
376 in double theTrimSize);
379 * Create a plane, similar to the existing one, but with another size of representing face.
380 * \param theFace Referenced plane or LCS(Marker).
381 * \param theTrimSize New half size of a side of quadrangle face, representing the plane.
382 * \return New GEOM_Object, containing the created plane.
384 GEOM_Object MakePlaneFace (in GEOM_Object theFace,
385 in double theTrimSize);
388 * Create a local coordinate system.
389 * \param theOX,theOY,theOZ Three coordinates of coordinate system origin.
390 * \param theXDX,theXDY,theXDZ Three components of OX direction
391 * \param theYDX,theYDY,theYDZ Three components of OY direction
392 * \return New GEOM_Object, containing the created coordinate system.
394 GEOM_Object MakeMarker (in double theOX , in double theOY , in double theOZ,
395 in double theXDX, in double theXDY, in double theXDZ,
396 in double theYDX, in double theYDY, in double theYDZ);
399 * Create a tangent plane to specified face in the point with specified parameters.
400 * Values of parameters should be between 0. and 1.0
401 * \param theFace - face for which tangent plane shuold be built.
402 * \param theParameterU - value of parameter by U
403 * \param theParameterV - value of parameter Vthe
404 * \param theTrimSize - defines sizes of created face
405 * \return New GEOM_Object, containing the face built on tangent plane.
407 GEOM_Object MakeTangentPlaneOnFace(in GEOM_Object theFace,
408 in double theParameterU,
409 in double theParameterV,
410 in double theTrimSize);
413 interface GEOM_ITransformOperations : GEOM_IOperations
416 * Translate the given object along the vector, specified by its end points.
417 * \param theObject The object to be translated.
418 * \param thePoint1 Start point of translation vector.
419 * \param thePoint2 End point of translation vector.
422 GEOM_Object TranslateTwoPoints (in GEOM_Object theObject,
423 in GEOM_Object thePoint1,
424 in GEOM_Object thePoint2);
427 * Translate the given object along the vector, specified
428 * by its end points, creating its copy before the translation.
429 * \param theObject The object to be translated.
430 * \param thePoint1 Start point of translation vector.
431 * \param thePoint2 End point of translation vector.
432 * \return New GEOM_Object, containing the translated object.
434 GEOM_Object TranslateTwoPointsCopy (in GEOM_Object theObject,
435 in GEOM_Object thePoint1,
436 in GEOM_Object thePoint2);
439 * Translate the given object along the vector, specified by its components.
440 * \param theObject The object to be translated.
441 * \param theDX,theDY,theDZ Components of translation vector.
444 GEOM_Object TranslateDXDYDZ (in GEOM_Object theObject,
445 in double theDX, in double theDY, in double theDZ);
448 * Translate the given object along the vector, specified
449 * by its components, creating its copy before the translation.
450 * \param theObject The object to be translated.
451 * \param theDX,theDY,theDZ Components of translation vector.
452 * \return New GEOM_Object, containing the translated object.
454 GEOM_Object TranslateDXDYDZCopy (in GEOM_Object theObject,
455 in double theDX, in double theDY, in double theDZ);
459 * Translate the given object along the given vector.
460 * \param theObject The object to be translated.
461 * \param theVector Translation vector, giving both direction and distance.
464 GEOM_Object TranslateVector (in GEOM_Object theObject,
465 in GEOM_Object theVector);
468 * Translate the given object along the given vector,
469 * creating its copy before the translation.
470 * \param theObject The object to be translated.
471 * \param theVector Translation vector, giving both direction and distance.
472 * \return New GEOM_Object, containing the translated object.
474 GEOM_Object TranslateVectorCopy (in GEOM_Object theObject,
475 in GEOM_Object theVector);
478 * Translate the given object along the given vector on given distance,
479 * creating its copy before the translation.
480 * \param theObject The object to be translated.
481 * \param theVector Translation vector, giving a direction.
482 * \param theDistance Translation distance, giving a distance.
483 * \param theCope Translation copy, creating its copy if true.
484 * \return New GEOM_Object, containing the translated object.
486 GEOM_Object TranslateVectorDistance (in GEOM_Object theObject,
487 in GEOM_Object theVector,
488 in double theDistance,
492 * Translate the given object along the given vector a given number times
493 * \param theObject The object to be translated.
494 * \param theVector Direction of the translation.
495 * \param theStep Distance to translate on.
496 * \param theNbTimes Quantity of translations to be done.
497 * \return New GEOM_Object, containing compound of all
498 * the shapes, obtained after each translation.
500 GEOM_Object MultiTranslate1D (in GEOM_Object theObject,
501 in GEOM_Object theVector,
506 * Conseqently apply two specified translations to theObject specified number of times.
507 * \param theObject The object to be translated.
508 * \param theVector1 Direction of the first translation.
509 * \param theStep1 Step of the first translation.
510 * \param theNbTimes1 Quantity of translations to be done along theVector1.
511 * \param theVector2 Direction of the second translation.
512 * \param theStep2 Step of the second translation.
513 * \param theNbTimes2 Quantity of translations to be done along theVector2.
514 * \return New GEOM_Object, containing compound of all
515 * the shapes, obtained after each translation.
517 GEOM_Object MultiTranslate2D (in GEOM_Object theObject,
518 in GEOM_Object theVector1,
521 in GEOM_Object theVector2,
523 in long theNbTimes2);
526 * Rotate given object around vector perpendicular to plane containing three points.
527 * \param theObject The object to be rotated.
528 * \param theCentPoint central point - the axis is the vector perpendicular to the plane
529 * containing the three points.
530 * \param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
533 GEOM_Object RotateThreePoints (in GEOM_Object theObject,
534 in GEOM_Object theCentPoint,
535 in GEOM_Object thePoint1,
536 in GEOM_Object thePoint2);
540 * Rotate given object around vector perpendicular to plane containing three points.
541 * Creating its copy before the rotatation.
542 * \param theObject The object to be rotated.
543 * \param theCentPoint central point - the axis is the vector perpendicular to the plane
544 * containing the three points.
545 * \param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
546 * \return New GEOM_Object, containing the rotated object.
548 GEOM_Object RotateThreePointsCopy (in GEOM_Object theObject,
549 in GEOM_Object theCentPoint,
550 in GEOM_Object thePoint1,
551 in GEOM_Object thePoint2);
554 * Rotate the given object around the given axis on the given angle.
555 * \param theObject The object to be rotated.
556 * \param theAxis Rotation axis.
557 * \param theAngle Rotation angle in radians.
560 GEOM_Object Rotate (in GEOM_Object theObject,
561 in GEOM_Object theAxis,
566 * Rotate the given object around the given axis
567 * on the given angle, creating its copy before the rotatation.
568 * \param theObject The object to be rotated.
569 * \param theAxis Rotation axis.
570 * \param theAngle Rotation angle in radians.
571 * \return New GEOM_Object, containing the rotated object.
573 GEOM_Object RotateCopy (in GEOM_Object theObject,
574 in GEOM_Object theAxis,
579 * Rotate the given object around the given axis a given number times.
580 * Rotation angle will be 2*PI/theNbTimes.
581 * \param theObject The object to be rotated.
582 * \param theAxis The rotation axis.
583 * \param theNbTimes Quantity of rotations to be done.
584 * \return New GEOM_Object, containing compound of all the
585 * shapes, obtained after each rotation.
587 GEOM_Object MultiRotate1D (in GEOM_Object theObject,
588 in GEOM_Object theAxis,
592 * Rotate the given object around the
593 * given axis on the given angle a given number
594 * times and multi-translate each rotation result.
595 * Translation direction passes through center of gravity
596 * of rotated shape and its projection on the rotation axis.
597 * \param theObject The object to be rotated.
598 * \param theAxis Rotation axis.
599 * \param theAngle Rotation angle in graduces.
600 * \param theNbTimes1 Quantity of rotations to be done.
601 * \param theStep Translation distance.
602 * \param theNbTimes2 Quantity of translations to be done.
603 * \return New GEOM_Object, containing compound of all the
604 * shapes, obtained after each transformation.
606 GEOM_Object MultiRotate2D (in GEOM_Object theObject,
607 in GEOM_Object theAxis,
611 in long theNbTimes2);
614 * Replace the given object by an object,
615 * symmetrical to it relatively the given plane.
616 * \param theObject The object to be mirrored.
617 * \param thePlane Plane of symmetry.
619 GEOM_Object MirrorPlane (in GEOM_Object theObject, in GEOM_Object thePlane);
622 * Create an object, symmetrical
623 * to the given one relatively the given plane.
624 * \param theObject The object to be mirrored.
625 * \param thePlane Plane of symmetry.
626 * \return New GEOM_Object, containing the mirrored shape.
628 GEOM_Object MirrorPlaneCopy (in GEOM_Object theObject, in GEOM_Object thePlane);
631 * Replace the given object by an object,
632 * symmetrical to it relatively the given axis.
633 * \param theObject The object to be mirrored.
634 * \param theAxis Axis of symmetry.
637 GEOM_Object MirrorAxis (in GEOM_Object theObject, in GEOM_Object theAxis);
640 * Create an object, symmetrical
641 * to the given one relatively the given axis.
642 * \param theObject The object to be mirrored.
643 * \param theAxis Axis of symmetry.
644 * \return New GEOM_Object, containing the mirrored object.
646 GEOM_Object MirrorAxisCopy (in GEOM_Object theObject, in GEOM_Object theAxis);
649 * Replace the given object by an object, symmetrical to it relatively the given point.
650 * \param theObject The object to be mirrored.
651 * \param thePoint Point of symmetry.
654 GEOM_Object MirrorPoint (in GEOM_Object theObject, in GEOM_Object thePoint);
657 * Create an object, symmetrical to the given one relatively the given point.
658 * \param theObject The object to be mirrored.
659 * \param thePoint Point of symmetry.
660 * \return New GEOM_Object, containing the mirrored object.
662 GEOM_Object MirrorPointCopy (in GEOM_Object theObject, in GEOM_Object thePoint);
665 * Replace the given object by its offset.
666 * \param theObject The base object for the offset.
667 * \param theOffset Offset value.
670 GEOM_Object OffsetShape (in GEOM_Object theObject, in double theOffset);
673 * Create new object as offset of the given one.
674 * \param theObject The base object for the offset.
675 * \param theOffset Offset value.
676 * \return New GEOM_Object, containing the offset object.
678 GEOM_Object OffsetShapeCopy (in GEOM_Object theObject, in double theOffset);
681 * Scale the given object by the factor.
682 * \param theObject The object to be scaled.
683 * \param thePoint Center point for scaling.
684 * \param theFactor Scaling factor value.
687 GEOM_Object ScaleShape (in GEOM_Object theObject, in GEOM_Object thePoint,
688 in double theFactor);
691 * Scale the given object by the factor, creating its copy before the scaling.
692 * \param theObject The object to be scaled.
693 * \param thePoint Center point for scaling.
694 * \param theFactor Scaling factor value.
695 * \return New GEOM_Object, containing the scaled shape.
697 GEOM_Object ScaleShapeCopy (in GEOM_Object theObject, in GEOM_Object thePoint,
698 in double theFactor);
701 * Modify the Location of the given object by LCS.
702 * \param theObject The object to be displaced.
703 * \param theStartLCS Coordinate system to perform displacement from it.
704 * If \a theStartLCS is NULL, displacement
705 * will be performed from global CS.
706 * If \a theObject itself is used as \a theStartLCS,
707 * its location will be changed to \a theEndLCS.
708 * \param theEndLCS Coordinate system to perform displacement to it.
711 GEOM_Object PositionShape (in GEOM_Object theObject,
712 in GEOM_Object theStartLCS,
713 in GEOM_Object theEndLCS);
716 * Modify the Location of the given object by LCS,
717 * creating its copy before the setting.
718 * \param theObject The object to be displaced.
719 * \param theStartLCS Coordinate system to perform displacement from it.
720 * If \a theStartLCS is NULL, displacement
721 * will be performed from global CS.
722 * If \a theObject itself is used as \a theStartLCS,
723 * its location will be changed to \a theEndLCS.
724 * \param theEndLCS Coordinate system to perform displacement to it.
725 * \return New GEOM_Object, containing the displaced shape.
727 GEOM_Object PositionShapeCopy (in GEOM_Object theObject,
728 in GEOM_Object theStartLCS,
729 in GEOM_Object theEndLCS);
733 * GEOM_I3DPrimOperations: Interface for 3D primitives creation
734 * Box, Cylinder, Cone, Sphere, Prism (extrusion),
735 * Pipe (extrusion along contour), Revolution, Solid (from shell).
737 interface GEOM_I3DPrimOperations : GEOM_IOperations
740 * Create a box with specified dimensions along the coordinate axes
741 * and with edges, parallel to the coordinate axes.
742 * Center of the box will be at point (DX/2, DY/2, DZ/2).
743 * \param theDX Length of Box edges, parallel to OX axis.
744 * \param theDY Length of Box edges, parallel to OY axis.
745 * \param theDZ Length of Box edges, parallel to OZ axis.
746 * \return New GEOM_Object, containing the created box.
748 GEOM_Object MakeBoxDXDYDZ (in double theDX, in double theDY, in double theDZ);
751 * Create a box with two specified opposite vertices,
752 * and with edges, parallel to the coordinate axes
753 * \param thePnt1 First of two opposite vertices.
754 * \param thePnt2 Second of two opposite vertices.
755 * \return New GEOM_Object, containing the created box.
757 GEOM_Object MakeBoxTwoPnt (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
760 * Create a cylinder with given radius and height at
761 * the origin of coordinate system. Axis of the cylinder
762 * will be collinear to the OZ axis of the coordinate system.
763 * \param theR Cylinder radius.
764 * \param theH Cylinder height.
765 * \return New GEOM_Object, containing the created cylinder.
767 GEOM_Object MakeCylinderRH (in double theR, in double theH);
770 * Create a cylinder with given base point, axis, radius and height.
771 * \param thePnt Central point of cylinder base.
772 * \param theAxis Cylinder axis.
773 * \param theR Cylinder radius.
774 * \param theH Cylinder height.
775 * \return New GEOM_Object, containing the created cylinder.
777 GEOM_Object MakeCylinderPntVecRH (in GEOM_Object thePnt,
778 in GEOM_Object theAxis,
783 * Create a cone with given height and radiuses at
784 * the origin of coordinate system. Axis of the cone will
785 * be collinear to the OZ axis of the coordinate system.
786 * \param theR1 Radius of the first cone base.
787 * \param theR2 Radius of the second cone base.
788 * \note If both radiuses are non-zero, the cone will be truncated.
789 * \note If the radiuses are equal, a cylinder will be created instead.
790 * \param theH Cone height.
791 * \return New GEOM_Object, containing the created cone.
793 GEOM_Object MakeConeR1R2H (in double theR1, in double theR2, in double theH);
796 * Create a cone with given base point, axis, height and radiuses.
797 * \param thePnt Central point of the first cone base.
798 * \param theAxis Cone axis.
799 * \param theR1 Radius of the first cone base.
800 * \param theR2 Radius of the second cone base.
801 * \note If both radiuses are non-zero, the cone will be truncated.
802 * \note If the radiuses are equal, a cylinder will be created instead.
803 * \param theH Cone height.
804 * \return New GEOM_Object, containing the created cone.
806 GEOM_Object MakeConePntVecR1R2H (in GEOM_Object thePnt,
807 in GEOM_Object theAxis,
813 * Create a torus with given radiuses at the origin of coordinate system.
814 * \param theRMajor Torus major radius.
815 * \param theRMinor Torus minor radius.
816 * \return New GEOM_Object, containing the created torus.
818 GEOM_Object MakeTorusRR (in double theRMajor,
819 in double theRMinor);
822 * Create a torus with given center, normal vector and radiuses.
823 * \param thePnt Torus central point.
824 * \param theVec Torus axis of symmetry.
825 * \param theRMajor Torus major radius.
826 * \param theRMinor Torus minor radius.
827 * \return New GEOM_Object, containing the created torus.
829 GEOM_Object MakeTorusPntVecRR (in GEOM_Object thePnt,
830 in GEOM_Object theVec,
832 in double theRMinor);
835 * Create a sphere with given radius at the origin of coordinate system.
836 * \param theR Sphere radius.
837 * \return New GEOM_Object, containing the created sphere.
839 GEOM_Object MakeSphereR (in double theR);
842 * Create a sphere with given center and radius.
843 * \param thePnt Sphere center.
844 * \param theR Sphere radius.
845 * \return New GEOM_Object, containing the created .
847 GEOM_Object MakeSpherePntR (in GEOM_Object thePnt, in double theR);
850 * Create a shape by extrusion of the base shape along the vector,
851 * i.e. all the space, transfixed by the base shape during its translation
852 * along the vector on the given distance.
853 * \param theBase Base shape to be extruded.
854 * \param theVec Direction of extrusion.
855 * \param theH Prism dimension along theVec.
856 * \return New GEOM_Object, containing the created prism.
858 GEOM_Object MakePrismVecH (in GEOM_Object theBase,
859 in GEOM_Object theVec,
861 /* The Same Prism but in 2 directions (forward&backward) */
862 GEOM_Object MakePrismVecH2Ways (in GEOM_Object theBase,
863 in GEOM_Object theVec,
867 * Create a shape by extrusion of the base shape along a vector, defined by two points.
868 * \param theBase Base shape to be extruded.
869 * \param thePoint1 First end of extrusion vector.
870 * \param thePoint2 Second end of extrusion vector.
871 * \return New GEOM_Object, containing the created prism.
873 GEOM_Object MakePrismTwoPnt (in GEOM_Object theBase,
874 in GEOM_Object thePoint1,
875 in GEOM_Object thePoint2);
876 /* The same prism but in two directions forward&backward */
877 GEOM_Object MakePrismTwoPnt2Ways (in GEOM_Object theBase,
878 in GEOM_Object thePoint1,
879 in GEOM_Object thePoint2);
882 * Create a shape by extrusion of the base shape along
883 * the path shape. The path shape can be a wire or an edge.
884 * \param theBase Base shape to be extruded.
885 * \param thePath Path shape to extrude the base shape along it.
886 * \return New GEOM_Object, containing the created pipe.
888 GEOM_Object MakePipe (in GEOM_Object theBase, in GEOM_Object thePath);
891 * Create a shape by revolution of the base shape around the axis
892 * on the given angle, i.e. all the space, transfixed by the base
893 * shape during its rotation around the axis on the given angle.
894 * \param theBase Base shape to be rotated.
895 * \param theAxis Rotation axis.
896 * \param theAngle Rotation angle in radians.
897 * \return New GEOM_Object, containing the created revolution.
899 GEOM_Object MakeRevolutionAxisAngle (in GEOM_Object theBase,
900 in GEOM_Object theAxis,
902 /* The Same Revolution but in both ways forward&backward */
903 GEOM_Object MakeRevolutionAxisAngle2Ways (in GEOM_Object theBase,
904 in GEOM_Object theAxis,
908 * Create a filling from the given compound of contours.
909 * \param theMinDeg a minimal degree of BSpline surface to create
910 * \param theMaxDeg a maximal degree of BSpline surface to create
911 * \param theTol2D a 2d tolerance to be reached
912 * \param theTol3D a 3d tolerance to be reached
913 * \param theNbIter a number of iteration of approximation algorithm
914 * \return New GEOM_Object, containing the created filling surface.
916 GEOM_Object MakeFilling (in GEOM_Object theShape,
917 in long theMinDeg, in long theMaxDeg,
918 in double theTol2D, in double theTol3D,
919 in long theNbIter, in boolean theApprox);
922 * Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
923 * \param theSeqSections - set of specified sections.
924 * \param theModeSolid - mode defining building solid or shell
925 * \param thePreci - precision 3D used for smoothing by default 1.e-6
926 * \param theRuled - mode defining type of the result surfaces (ruled or smoothed).
927 * \return New GEOM_Object, containing the created shell or solid.
929 GEOM_Object MakeThruSections(in ListOfGO theSeqSections,
930 in boolean theModeSolid,
932 in boolean theRuled);
935 * Create a shape by extrusion of the profile shape along
936 * the path shape. The path shape can be a wire or an edge.
937 * the several profiles can be specified in the several locations of path.
938 * \param theSeqBases - list of Bases shape to be extruded.
939 * \param theLocations - list of locations on the path corresponding
940 * specified list of the Bases shapes. Number of locations
941 * should be equal to number of bases or list of locations can be empty.
942 * \param thePath - Path shape to extrude the base shape along it.
943 * \param theWithContact - the mode defining that the section is translated to be in
944 * contact with the spine.
945 * \param - WithCorrection - defining that the section is rotated to be
946 * orthogonal to the spine tangent in the correspondent point
947 * \return New GEOM_Object, containing the created pipe.
949 GEOM_Object MakePipeWithDifferentSections (in ListOfGO theSeqBases,
950 in ListOfGO theLocations,
951 in GEOM_Object thePath,
952 in boolean theWithContact ,
953 in boolean theWithCorrection );
956 * Create a shape by extrusion of the profile shape along
957 * the path shape. The path shape can be a shell or a face.
958 * the several profiles can be specified in the several locations of path.
959 * \param theSeqBases - list of Bases shape to be extruded.
960 * \param theSeqSubBases - list of corresponding subshapes of section shapes.
961 * \param theLocations - list of locations on the path corresponding
962 * specified list of the Bases shapes. Number of locations
963 * should be equal to number of bases.
964 * \param thePath - Path shape to extrude the base shape along it.
965 * \param theWithContact - the mode defining that the section is translated to be in
966 * contact with the spine.
967 * \param - WithCorrection - defining that the section is rotated to be
968 * orthogonal to the spine tangent in the correspondent point
969 * \return New GEOM_Object, containing the created pipe.
971 GEOM_Object MakePipeWithShellSections (in ListOfGO theSeqBases,
972 in ListOfGO theSeqSubBases,
973 in ListOfGO theLocations,
974 in GEOM_Object thePath,
975 in boolean theWithContact ,
976 in boolean theWithCorrection );
979 * Create solids between given sections
980 * \param theSeqBases - list of sections (shell or face).
981 * \param theLocations - list of corresponding vertexes
982 * \return New GEOM_Object, containing the created solids.
984 GEOM_Object MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
985 in ListOfGO theLocations);
989 * GEOM_IShapesOperations: Interface for Shapes creation:
990 * Edge from two points, Wire from edges, Face from wire,
991 * Shell from faces, Solid from shells, Compound from shapes
993 interface GEOM_IShapesOperations : GEOM_IOperations
996 * Create a linear edge with specified ends.
997 * \param thePnt1 Point for the first end of edge.
998 * \param thePnt2 Point for the second end of edge.
999 * \return New GEOM_Object, containing the created edge.
1001 GEOM_Object MakeEdge (in GEOM_Object thePnt1, in GEOM_Object thePnt2);
1004 * Create a wire from the set of edges and wires.
1005 * \param theEdgesAndWires List of edge and/or wires.
1006 * \return New GEOM_Object, containing the created wire.
1008 GEOM_Object MakeWire (in ListOfGO theEdgesAndWires);
1011 * Create a face on the given wire.
1012 * \param theWire closed Wire or Edge to build the face on.
1013 * \param isPlanarWanted If TRUE, only planar face will be built.
1014 * If impossible, NULL object will be returned.
1015 * \return New GEOM_Object, containing the created face.
1017 GEOM_Object MakeFace (in GEOM_Object theWire, in boolean isPlanarWanted);
1020 * Create a face on the given wires set.
1021 * \param theWires List of closed wires or edges to build the face on.
1022 * \param isPlanarWanted If TRUE, only planar face will be built.
1023 * If impossible, NULL object will be returned.
1024 * \return New GEOM_Object, containing the created face.
1026 GEOM_Object MakeFaceWires (in ListOfGO theWires, in boolean isPlanarWanted);
1029 * Create a shell from the set of faces and shells.
1030 * \param theFacesAndShells List of faces and/or shells.
1031 * \return New GEOM_Object, containing the created shell.
1033 GEOM_Object MakeShell (in ListOfGO theFacesAndShells);
1036 * Create a solid, bounded by the given shell.
1037 * \param theShell Bounding shell.
1038 * \return New GEOM_Object, containing the created solid.
1040 GEOM_Object MakeSolidShell (in GEOM_Object theShell);
1043 * Create a solid, bounded by the given shells.
1044 * \param theShells Bounding shells.
1045 * \return New GEOM_Object, containing the created solid.
1047 GEOM_Object MakeSolidShells (in ListOfGO theShells);
1050 * Create a compound of the given shapes.
1051 * \param theShapes List of shapes to put in compound.
1052 * \return New GEOM_Object, containing the created compound.
1054 GEOM_Object MakeCompound (in ListOfGO theShapes);
1057 * Replace coincident faces in theShape by one face.
1058 * \param theShape Initial shape.
1059 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1060 * \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
1061 * \return New GEOM_Object, containing a copy of theShape without coincident faces.
1063 GEOM_Object MakeGlueFaces (in GEOM_Object theShape, in double theTolerance, in boolean doKeepNonSolids);
1066 * Find coincident faces in theShape for possible gluing.
1067 * \param theShape Initial shape.
1068 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1071 ListOfGO GetGlueFaces (in GEOM_Object theShape, in double theTolerance);
1074 * Replace coincident faces in theShape by one face
1075 * in compliance with given list of faces
1076 * \param theShape Initial shape.
1077 * \param theTolerance Maximum distance between faces, which can be considered as coincident.
1078 * \param theFaces List of faces for gluing.
1079 * \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
1080 * \return New GEOM_Object, containing a copy of theShape without some faces.
1082 GEOM_Object MakeGlueFacesByList (in GEOM_Object theShape, in double theTolerance,
1083 in ListOfGO theFaces, in boolean doKeepNonSolids);
1086 * Explode a shape on subshapes of a given type.
1087 * \param theShape Shape to be exploded.
1088 * \param theShapeType Type of sub-shapes to be retrieved.
1089 * \param isSorted If this parameter is TRUE, sub-shapes will be
1090 * sorted by coordinates of their gravity centers.
1091 * \return List of sub-shapes of type theShapeType, contained in theShape.
1093 ListOfGO MakeExplode (in GEOM_Object theShape,
1094 in long theShapeType,
1095 in boolean isSorted);
1098 * Explode a shape on subshapes of a given type.
1099 * Does the same, as the above method, but returns IDs of sub-shapes,
1100 * not GEOM_Objects. It works faster.
1101 * \param theShape Shape to be exploded.
1102 * \param theShapeType Type of sub-shapes to be retrieved.
1103 * \param isSorted If this parameter is TRUE, sub-shapes will be
1104 * sorted by coordinates of their gravity centers.
1105 * \return List of IDs of sub-shapes of type theShapeType, contained in theShape.
1107 ListOfLong SubShapeAllIDs (in GEOM_Object theShape,
1108 in long theShapeType,
1109 in boolean isSorted);
1112 * Get a sub shape defined by its unique ID inside \a theMainShape
1113 * \note The sub shape GEOM_Objects can has ONLY ONE function.
1114 * Don't try to apply modification operations on them.
1116 GEOM_Object GetSubShape (in GEOM_Object theMainShape,
1120 * Get global index of \a theSubShape in \a theMainShape.
1121 * \param theMainShape Main shape.
1122 * \param theSubShape Sub-shape of the main shape.
1123 * \return global index of \a theSubShape in \a theMainShape.
1125 long GetSubShapeIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
1128 * Get index of \a theSubShape in \a theMainShape, unique among sub-shapes of the same type.
1129 * Together with method <VAR>GetShapeTypeString()</VAR> it can be used
1130 * to generate automatic names for sub-shapes, when publishing them in a study.
1131 * \param theMainShape Main shape.
1132 * \param theSubShape Sub-shape of the main shape.
1133 * \return index of \a theSubShape in a list of all sub-shapes of \a theMainShape of the same type.
1135 long GetTopologyIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
1138 * \brief Get name of type of \a theShape.
1140 * Use wide type notation, taking into consideration both topology and geometry of the shape.
1141 * Together with method <VAR>GetTopologyIndex()</VAR> it can be used
1142 * to generate automatic names for sub-shapes, when publishing them in a study.
1143 * \param theShape The shape to get a type of.
1144 * \return String, containing a type name of \a theShape.
1146 string GetShapeTypeString (in GEOM_Object theShape);
1149 * Count number of faces in the given shape.
1150 * \param theShape Shape to count faces in.
1151 * \return Number of faces in the given shape.
1153 long NumberOfFaces (in GEOM_Object theShape);
1156 * Count number of edges in the given shape.
1157 * \param theShape Shape to count edges in.
1158 * \return Number of edges in theShape.
1160 long NumberOfEdges (in GEOM_Object theShape);
1163 * Reverses an orientation the given shape.
1164 * \param theShape Shape to be reversed.
1165 * \return The reversed copy of theShape.
1167 GEOM_Object ChangeOrientation (in GEOM_Object theShape);
1170 * Retrieve all free faces from the given shape.
1171 * Free face is a face, which is not shared between two shells of the shape.
1172 * \param theShape Shape to find free faces in.
1173 * \return List of IDs of all free faces, contained in theShape.
1175 ListOfLong GetFreeFacesIDs (in GEOM_Object theShape);
1178 * Get all sub-shapes of theShape1 of the given type, shared with theShape2.
1179 * \param theShape1 Shape to find sub-shapes in.
1180 * \param theShape2 Shape to find shared sub-shapes with.
1181 * \param theShapeType Type of sub-shapes to be retrieved.
1182 * \return List of sub-shapes of theShape1, shared with theShape2.
1184 ListOfGO GetSharedShapes (in GEOM_Object theShape1,
1185 in GEOM_Object theShape2,
1186 in long theShapeType);
1189 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1190 * the specified plane by the certain way, defined through \a theState parameter.
1191 * \param theShape Shape to find sub-shapes of.
1192 * \param theShapeType Type of sub-shapes to be retrieved.
1193 * \param theAx1 Vector (or line, or linear edge), specifying normal
1194 * direction and location of the plane to find shapes on.
1195 * \param theState The state of the subshapes to find.
1196 * \return List of all found sub-shapes.
1198 ListOfGO GetShapesOnPlane (in GEOM_Object theShape,
1199 in long theShapeType,
1200 in GEOM_Object theAx1,
1201 in shape_state theState);
1203 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1204 * the specified plane by the certain way, defined through \a theState parameter.
1205 * \param theShape Shape to find sub-shapes of.
1206 * \param theShapeType Type of sub-shapes to be retrieved.
1207 * \param theAx1 Vector (or line, or linear edge), specifying normal
1208 * direction of the plane to find shapes on.
1209 * \param thePnt Point specifying location of the plane to find shapes on.
1210 * \param theState The state of the subshapes to find.
1211 * \return List of all found sub-shapes.
1213 ListOfGO GetShapesOnPlaneWithLocation (in GEOM_Object theShape,
1214 in long theShapeType,
1215 in GEOM_Object theAx1,
1216 in GEOM_Object thePnt,
1217 in shape_state theState);
1222 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1223 * the specified cylinder by the certain way, defined through \a theState parameter.
1224 * \param theShape Shape to find sub-shapes of.
1225 * \param theShapeType Type of sub-shapes to be retrieved.
1226 * \param theAxis Vector (or line, or linear edge), specifying
1227 * axis of the cylinder to find shapes on.
1228 * \param theRadius Radius of the cylinder to find shapes on.
1229 * \param theState The state of the subshapes to find.
1230 * \return List of all found sub-shapes.
1232 ListOfGO GetShapesOnCylinder (in GEOM_Object theShape,
1233 in long theShapeType,
1234 in GEOM_Object theAxis,
1235 in double theRadius,
1236 in shape_state theState);
1239 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1240 * the specified sphere by the certain way, defined through \a theState parameter.
1241 * \param theShape Shape to find sub-shapes of.
1242 * \param theShapeType Type of sub-shapes to be retrieved.
1243 * \param theCenter Point, specifying center of the sphere to find shapes on.
1244 * \param theRadius Radius of the sphere to find shapes on.
1245 * \param theState The state of the subshapes to find.
1246 * \return List of all found sub-shapes.
1248 ListOfGO GetShapesOnSphere (in GEOM_Object theShape,
1249 in long theShapeType,
1250 in GEOM_Object theCenter,
1251 in double theRadius,
1252 in shape_state theState);
1255 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1256 * the specified quadrangle by the certain way, defined through \a theState parameter.
1257 * \param theShape Shape to find sub-shapes of.
1258 * \param theShapeType Type of sub-shapes to be retrieved.
1259 * \param theTopLeftPoint Top left quadrangle corner
1260 * \param theTopRigthPoint Top right quadrangle corner
1261 * \param theBottomLeftPoint Bottom left quadrangle corner
1262 * \param theBottomRigthPoint Bottom right quadrangle corner
1263 * \param theState The state of the subshapes to find.
1264 * \return List of all found sub-shapes.
1266 ListOfGO GetShapesOnQuadrangle (in GEOM_Object theShape,
1267 in long theShapeType,
1268 in GEOM_Object theTopLeftPoint,
1269 in GEOM_Object theTopRigthPoint,
1270 in GEOM_Object theBottomLeftPoint,
1271 in GEOM_Object theBottomRigthPoint,
1272 in shape_state theState);
1275 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1276 * the specified plane by the certain way, defined through \a theState parameter.
1277 * \param theShape Shape to find sub-shapes of.
1278 * \param theShapeType Type of sub-shapes to be retrieved.
1279 * \param theAx1 Vector (or line, or linear edge), specifying normal
1280 * direction and location of the plane to find shapes on.
1281 * \param theState The state of the subshapes to find.
1282 * \return List of IDs of all found sub-shapes.
1284 ListOfLong GetShapesOnPlaneIDs (in GEOM_Object theShape,
1285 in long theShapeType,
1286 in GEOM_Object theAx1,
1287 in shape_state theState);
1290 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1291 * the specified plane by the certain way, defined through \a theState parameter.
1292 * \param theShape Shape to find sub-shapes of.
1293 * \param theShapeType Type of sub-shapes to be retrieved.
1294 * \param theAx1 Vector (or line, or linear edge), specifying normal
1295 * direction of the plane to find shapes on.
1296 * \param thePnt Point specifying location of the plane to find shapes on.
1297 * \param theState The state of the subshapes to find.
1298 * \return List of IDs of all found sub-shapes.
1300 ListOfLong GetShapesOnPlaneWithLocationIDs (in GEOM_Object theShape,
1301 in long theShapeType,
1302 in GEOM_Object theAx1,
1303 in GEOM_Object thePnt,
1304 in shape_state theState);
1307 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1308 * the specified cylinder by the certain way, defined through \a theState parameter.
1309 * \param theShape Shape to find sub-shapes of.
1310 * \param theShapeType Type of sub-shapes to be retrieved.
1311 * \param theAxis Vector (or line, or linear edge), specifying
1312 * axis of the cylinder to find shapes on.
1313 * \param theRadius Radius of the cylinder to find shapes on.
1314 * \param theState The state of the subshapes to find.
1315 * \return List of IDs of all found sub-shapes.
1317 ListOfLong GetShapesOnCylinderIDs (in GEOM_Object theShape,
1318 in long theShapeType,
1319 in GEOM_Object theAxis,
1320 in double theRadius,
1321 in shape_state theState);
1324 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1325 * the specified sphere by the certain way, defined through \a theState parameter.
1326 * \param theShape Shape to find sub-shapes of.
1327 * \param theShapeType Type of sub-shapes to be retrieved.
1328 * \param theCenter Point, specifying center of the sphere to find shapes on.
1329 * \param theRadius Radius of the sphere to find shapes on.
1330 * \param theState The state of the subshapes to find.
1331 * \return List of IDs of all found sub-shapes.
1333 ListOfLong GetShapesOnSphereIDs (in GEOM_Object theShape,
1334 in long theShapeType,
1335 in GEOM_Object theCenter,
1336 in double theRadius,
1337 in shape_state theState);
1340 * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
1341 * the specified quadrangle by the certain way, defined through \a theState parameter.
1342 * \param theShape Shape to find sub-shapes of.
1343 * \param theShapeType Type of sub-shapes to be retrieved.
1344 * \param theTopLeftPoint Top left quadrangle corner
1345 * \param theTopRigthPoint Top right quadrangle corner
1346 * \param theBottomLeftPoint Bottom left quadrangle corner
1347 * \param theBottomRigthPoint Bottom right quadrangle corner
1348 * \param theState The state of the subshapes to find.
1349 * \return List of IDs of all found sub-shapes.
1351 ListOfLong GetShapesOnQuadrangleIDs (in GEOM_Object theShape,
1352 in long theShapeType,
1353 in GEOM_Object theTopLeftPoint,
1354 in GEOM_Object theTopRigthPoint,
1355 in GEOM_Object theBottomLeftPoint,
1356 in GEOM_Object theBottomRigthPoint,
1357 in shape_state theState);
1360 * \brief Find subshapes complying with given status
1361 * \param theBox - the box to check state of subshapes against
1362 * \param theShape - the shape to explore
1363 * \param theShapeType - type of subshape of theShape
1364 * \param theState - required state
1365 * \return List of IDs of all found sub-shapes.
1367 ListOfLong GetShapesOnBoxIDs (in GEOM_Object theBox,
1368 in GEOM_Object theShape,
1369 in long theShapeType,
1370 in shape_state theState);
1373 * \brief Find subshapes complying with given status
1374 * \param theBox - the box to check state of subshapes against
1375 * \param theShape - the shape to explore
1376 * \param theShapeType - type of subshape of theShape
1377 * \param theState - required state
1378 * \return List of all found sub-shapes.
1380 ListOfGO GetShapesOnBox (in GEOM_Object theBox,
1381 in GEOM_Object theShape,
1382 in long theShapeType,
1383 in shape_state theState);
1386 * \brief Find subshapes complying with given status
1387 * \param theCheckShape - the shape to check state of subshapes against
1388 * \param theShape - the shape to explore
1389 * \param theShapeType - type of subshape of theShape
1390 * \param theState - required state
1391 * \return List of IDs of all found sub-shapes.
1393 ListOfLong GetShapesOnShapeIDs (in GEOM_Object theCheckShape,
1394 in GEOM_Object theShape,
1395 in short theShapeType,
1396 in shape_state theState);
1399 * \brief Find subshapes complying with given status
1400 * \param theCheckShape - the shape to check state of subshapes against
1401 * \param theShape - the shape to explore
1402 * \param theShapeType - type of subshape of theShape
1403 * \param theState - required state
1404 * \return List of all found sub-shapes.
1406 ListOfGO GetShapesOnShape (in GEOM_Object theCheckShape,
1407 in GEOM_Object theShape,
1408 in short theShapeType,
1409 in shape_state theState);
1412 * \brief Find subshapes complying with given status
1413 * \param theCheckShape - the shape to check state of subshapes against
1414 * \param theShape - the shape to explore
1415 * \param theShapeType - type of subshape of theShape
1416 * \param theState - required state
1417 * \return compound includes all found sub-shapes.
1419 GEOM_Object GetShapesOnShapeAsCompound (in GEOM_Object theCheckShape,
1420 in GEOM_Object theShape,
1421 in short theShapeType,
1422 in shape_state theState);
1425 * Get sub-shape(s) of \a theShapeWhere, which are
1426 * coincident with \a theShapeWhat or could be a part of it.
1427 * \param theShapeWhere Shape to find sub-shapes of.
1428 * \param theShapeWhat Shape, specifying what to find.
1429 * \return Group of all found sub-shapes or a single found sub-shape.
1431 GEOM_Object GetInPlace (in GEOM_Object theShapeWhere,
1432 in GEOM_Object theShapeWhat);
1435 * Get sub-shape(s) of \a theShapeWhere, which are
1436 * coincident with \a theShapeWhat or could be a part of it.
1438 * Implementation of this method is based on a saved history of an operation,
1439 * produced \a theShapeWhere. The \a theShapeWhat must be among this operation's
1440 * arguments (an argument shape or a sub-shape of an argument shape).
1441 * The operation could be the Partition or one of boolean operations,
1442 * performed on simple shapes (not on compounds).
1444 * \param theShapeWhere Shape to find sub-shapes of.
1445 * \param theShapeWhat Shape, specifying what to find.
1446 * \return Group of all found sub-shapes or a single found sub-shape.
1448 GEOM_Object GetInPlaceByHistory (in GEOM_Object theShapeWhere,
1449 in GEOM_Object theShapeWhat);
1452 * Get sub-shape of theShapeWhere, which are
1453 * coincident with \a theShapeWhat that can either SOLID, FACE, EDGE or VERTEX.
1454 * \param theShapeWhere Shape to find sub-shapes of.
1455 * \param theShapeWhat Shape, specifying what to find.
1456 * \return found sub-shape.
1458 GEOM_Object GetSame (in GEOM_Object theShapeWhere,
1459 in GEOM_Object theShapeWhat);
1463 * GEOM_IBlocksOperations: Interface for Blocks construction
1464 * Face from points or edges, Block from faces,
1465 * Blocks multi-translation and multi-rotation
1467 interface GEOM_IBlocksOperations : GEOM_IOperations
1470 * Creation of blocks
1474 * Create a quadrangle face from four edges. Order of Edges is not
1475 * important. It is not necessary that edges share the same vertex.
1476 * \param theEdge1,theEdge2,theEdge3,theEdge4 Edges for the face bound.
1477 * \return New GEOM_Object, containing the created face.
1479 GEOM_Object MakeQuad (in GEOM_Object theEdge1,
1480 in GEOM_Object theEdge2,
1481 in GEOM_Object theEdge3,
1482 in GEOM_Object theEdge4);
1485 * Create a quadrangle face on two edges.
1486 * The missing edges will be built by creating the shortest ones.
1487 * \param theEdge1,theEdge2 Two opposite edges for the face.
1488 * \return New GEOM_Object, containing the created face.
1490 GEOM_Object MakeQuad2Edges (in GEOM_Object theEdge1,
1491 in GEOM_Object theEdge2);
1494 * Create a quadrangle face with specified corners.
1495 * The missing edges will be built by creating the shortest ones.
1496 * \param thePnt1,thePnt2,thePnt3,thePnt4 Corner vertices for the face.
1497 * \return New GEOM_Object, containing the created face.
1499 GEOM_Object MakeQuad4Vertices (in GEOM_Object thePnt1,
1500 in GEOM_Object thePnt2,
1501 in GEOM_Object thePnt3,
1502 in GEOM_Object thePnt4);
1505 * Create a hexahedral solid, bounded by the six given faces. Order of
1506 * faces is not important. It is not necessary that Faces share the same edge.
1507 * \param theFace1-theFace6 Faces for the hexahedral solid.
1508 * \return New GEOM_Object, containing the created solid.
1510 GEOM_Object MakeHexa (in GEOM_Object theFace1,
1511 in GEOM_Object theFace2,
1512 in GEOM_Object theFace3,
1513 in GEOM_Object theFace4,
1514 in GEOM_Object theFace5,
1515 in GEOM_Object theFace6);
1518 * Create a hexahedral solid between two given faces.
1519 * The missing faces will be built by creating the smallest ones.
1520 * \param theFace1,theFace2 Two opposite faces for the hexahedral solid.
1521 * \return New GEOM_Object, containing the created solid.
1523 GEOM_Object MakeHexa2Faces (in GEOM_Object theFace1,
1524 in GEOM_Object theFace2);
1527 * Extract elements of blocks and blocks compounds
1531 * Get a vertex, found in the given shape by its coordinates.
1532 * \param theShape Block or a compound of blocks.
1533 * \param theX,theY,theZ Coordinates of the sought vertex.
1534 * \param theEpsilon Maximum allowed distance between the resulting
1535 * vertex and point with the given coordinates.
1536 * \return New GEOM_Object, containing the found vertex.
1538 GEOM_Object GetPoint (in GEOM_Object theShape,
1542 in double theEpsilon);
1545 * Get an edge, found in the given shape by two given vertices.
1546 * \param theShape Block or a compound of blocks.
1547 * \param thePoint1,thePoint2 Points, close to the ends of the desired edge.
1548 * \return New GEOM_Object, containing the found edge.
1550 GEOM_Object GetEdge (in GEOM_Object theShape,
1551 in GEOM_Object thePoint1,
1552 in GEOM_Object thePoint2);
1555 * Find an edge of the given shape, which has minimal distance to the given point.
1556 * \param theShape Block or a compound of blocks.
1557 * \param thePoint Point, close to the desired edge.
1558 * \return New GEOM_Object, containing the found edge.
1560 GEOM_Object GetEdgeNearPoint (in GEOM_Object theShape,
1561 in GEOM_Object thePoint);
1564 * Returns a face, found in the given shape by four given corner vertices.
1565 * \param theShape Block or a compound of blocks.
1566 * \param thePoint1-thePoint4 Points, close to the corners of the desired face.
1567 * \return New GEOM_Object, containing the found face.
1569 GEOM_Object GetFaceByPoints (in GEOM_Object theShape,
1570 in GEOM_Object thePoint1,
1571 in GEOM_Object thePoint2,
1572 in GEOM_Object thePoint3,
1573 in GEOM_Object thePoint4);
1576 * Get a face of block, found in the given shape by two given edges.
1577 * \param theShape Block or a compound of blocks.
1578 * \param theEdge1,theEdge2 Edges, close to the edges of the desired face.
1579 * \return New GEOM_Object, containing the found face.
1581 GEOM_Object GetFaceByEdges (in GEOM_Object theShape,
1582 in GEOM_Object theEdge1,
1583 in GEOM_Object theEdge2);
1586 * Find a face, opposite to the given one in the given block.
1587 * \param theBlock Must be a hexahedral solid.
1588 * \param theFace Face of \a theBlock, opposite to the desired face.
1589 * \return New GEOM_Object, containing the found face.
1591 GEOM_Object GetOppositeFace (in GEOM_Object theBlock,
1592 in GEOM_Object theFace);
1595 * Find a face of the given shape, which has minimal distance to the given point.
1596 * \param theShape Block or a compound of blocks.
1597 * \param thePoint Point, close to the desired face.
1598 * \return New GEOM_Object, containing the found face.
1600 GEOM_Object GetFaceNearPoint (in GEOM_Object theShape,
1601 in GEOM_Object thePoint);
1604 * Find a face of block, whose outside normale has minimal angle with the given vector.
1605 * \param theShape Block or a compound of blocks.
1606 * \param theVector Vector, close to the normale of the desired face.
1607 * \return New GEOM_Object, containing the found face.
1609 GEOM_Object GetFaceByNormale (in GEOM_Object theBlock,
1610 in GEOM_Object theVector);
1613 * Extract blocks from blocks compounds
1617 * Check, if the compound contains only specified blocks.
1618 * \param theCompound The compound to check.
1619 * \param theMinNbFaces If solid has lower number of faces, it is not a block.
1620 * \param theMaxNbFaces If solid has higher number of faces, it is not a block.
1621 * \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
1622 * \return TRUE, if the given compound contains only blocks.
1623 * \return theNbBlocks Number of specified blocks in theCompound.
1625 boolean IsCompoundOfBlocks (in GEOM_Object theCompound,
1626 in long theMinNbFaces,
1627 in long theMaxNbFaces,
1628 out long theNbBlocks);
1631 * Enumeration of Blocks Compound defects.
1635 /* Each element of the compound should be a Block */
1638 /* An element is a potential block, but has degenerated and/or seam edge(s). */
1641 /* A connection between two Blocks should be an entire face or an entire edge */
1644 /* The compound should be connexe */
1647 /* The glue between two quadrangle faces should be applied */
1652 * Description of Blocks Compound defect: type and incriminated sub-shapes.
1657 ListOfLong incriminated;
1661 * Sequence of all Blocks Compound defects.
1663 typedef sequence<BCError> BCErrors;
1666 * Check, if the compound of blocks is given.
1667 * To be considered as a compound of blocks, the
1668 * given shape must satisfy the following conditions:
1669 * - Each element of the compound should be a Block (6 faces and 12 edges).
1670 * - A connection between two Blocks should be an entire quadrangle face or an entire edge.
1671 * - The compound should be connexe.
1672 * - The glue between two quadrangle faces should be applied.
1673 * \note Single block is also accepted as a valid compound of blocks.
1674 * \param theCompound The compound to check.
1675 * \return TRUE, if the given shape is a compound of blocks.
1676 * \return theErrors Structure, containing discovered errors and incriminated sub-shapes.
1678 boolean CheckCompoundOfBlocks (in GEOM_Object theCompound,
1679 out BCErrors theErrors);
1682 * Convert sequence of Blocks Compound errors, returned by
1683 * <VAR>CheckCompoundOfBlocks()</VAR>, into string.
1684 * \param theCompound The bad compound.
1685 * \param theErrors The sequence of \a theCompound errors.
1686 * \return String, describing all the errors in form, suitable for printing.
1688 string PrintBCErrors (in GEOM_Object theCompound,
1689 in BCErrors theErrors);
1692 * Remove all seam and degenerated edges from \a theShape.
1693 * Unite faces and edges, sharing one surface.
1694 * \param theShape The compound or single solid to remove irregular edges from.
1695 * \return Improved shape.
1697 GEOM_Object RemoveExtraEdges (in GEOM_Object theShape);
1700 * Check, if the given shape is a blocks compound.
1701 * Fix all detected errors.
1702 * \note Single block can be also fixed by this method.
1703 * \param theCompound The compound to check and improve.
1704 * \return Improved compound.
1706 GEOM_Object CheckAndImprove (in GEOM_Object theCompound);
1709 * Get all the blocks, contained in the given compound.
1710 * \param theCompound The compound to explode.
1711 * \param theMinNbFaces If solid has lower number of faces, it is not a block.
1712 * \param theMaxNbFaces If solid has higher number of faces, it is not a block.
1713 * \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
1714 * \return List of GEOM_Objects, containing the retrieved blocks.
1716 ListOfGO ExplodeCompoundOfBlocks (in GEOM_Object theCompound,
1717 in long theMinNbFaces,
1718 in long theMaxNbFaces);
1721 * Find block, containing the given point inside its volume or on boundary.
1722 * \param theCompound Compound, to find block in.
1723 * \param thePoint Point, close to the desired block. If the point lays on
1724 * boundary between some blocks, we return block with nearest center.
1725 * \return New GEOM_Object, containing the found block.
1727 GEOM_Object GetBlockNearPoint (in GEOM_Object theCompound,
1728 in GEOM_Object thePoint);
1731 * Find block, containing all the elements, passed as the parts, or maximum quantity of them.
1732 * \param theCompound Compound, to find block in.
1733 * \param theParts List of faces and/or edges and/or vertices to be parts of the found block.
1734 * \return New GEOM_Object, containing the found block.
1736 GEOM_Object GetBlockByParts (in GEOM_Object theCompound,
1737 in ListOfGO theParts);
1740 * Return all blocks, containing all the elements, passed as the parts.
1741 * \param theCompound Compound, to find blocks in.
1742 * \param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
1743 * \return List of GEOM_Objects, containing the found blocks.
1745 ListOfGO GetBlocksByParts (in GEOM_Object theCompound,
1746 in ListOfGO theParts);
1749 * Operations on blocks with gluing of result
1753 * Multi-transformate block and glue the result.
1754 * Transformation is defined so, as to superpose theDirFace1 with theDirFace2.
1755 * \param theBlock Hexahedral solid to be multi-transformed.
1756 * \param theDirFace1 First direction face global index.
1757 * \param theDirFace2 Second direction face global index.
1758 * \param theNbTimes Quantity of transformations to be done.
1759 * \note Global index of sub-shape can be obtained, using method
1760 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
1761 * \return New GEOM_Object, containing the result shape.
1763 GEOM_Object MakeMultiTransformation1D (in GEOM_Object theBlock,
1764 in long theDirFace1,
1765 in long theDirFace2,
1766 in long theNbTimes);
1769 * Multi-transformate block and glue the result.
1770 * \param theBlock Hexahedral solid to be multi-transformed.
1771 * \param theDirFace1U,theDirFace2U Direction faces for the first transformation.
1772 * \param theDirFace1V,theDirFace2V Direction faces for the second transformation.
1773 * \param theNbTimesU,theNbTimesV Quantity of transformations to be done.
1774 * \return New GEOM_Object, containing the result shape.
1776 GEOM_Object MakeMultiTransformation2D (in GEOM_Object theBlock,
1777 in long theDirFace1U,
1778 in long theDirFace2U,
1779 in long theNbTimesU,
1780 in long theDirFace1V,
1781 in long theDirFace2V,
1782 in long theNbTimesV);
1785 * Special operation - propagation
1789 * Build all possible propagation groups.
1790 * Propagation group is a set of all edges, opposite to one (main)
1791 * edge of this group directly or through other opposite edges.
1792 * Notion of Opposite Edge make sence only on quadrangle face.
1793 * \param theShape Shape to build propagation groups on.
1794 * \return List of GEOM_Objects, each of them is a propagation group.
1796 ListOfGO Propagate (in GEOM_Object theShape);
1800 * GEOM_IBooleanOperations: Interface for boolean operations (Cut, Fuse, Common)
1802 interface GEOM_IBooleanOperations : GEOM_IOperations
1805 * Perform one of boolean operations on two given shapes.
1806 * \param theShape1 First argument for boolean operation.
1807 * \param theShape2 Second argument for boolean operation.
1808 * \param theOperation Indicates the operation to be done:
1809 * 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
1810 * \return New GEOM_Object, containing the result shape.
1812 GEOM_Object MakeBoolean (in GEOM_Object theShape1,
1813 in GEOM_Object theShape2,
1814 in long theOperation);
1817 * Perform partition operation.
1818 * \param theShapes Shapes to be intersected.
1819 * \param theTools Shapes to intersect theShapes.
1820 * \note Each compound from ListShapes and ListTools will be exploded in order
1821 * to avoid possible intersection between shapes from this compound.
1822 * \param theLimit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
1823 # \param KeepNonlimitShapes: if this parameter == 0 - only shapes with
1824 # type <= Limit are kept in the result,
1825 # else - shapes with type > Limit are kept
1826 # also (if they exist)
1828 * After implementation new version of PartitionAlgo (October 2006)
1829 * other parameters are ignored by current functionality. They are kept
1830 * in this function only for supporting old versions.
1831 * Ignored parameters:
1832 * \param theKeepInside Shapes, outside which the results will be deleted.
1833 * Each shape from theKeepInside must belong to theShapes also.
1834 * \param theRemoveInside Shapes, inside which the results will be deleted.
1835 * Each shape from theRemoveInside must belong to theShapes also.
1836 * \param theRemoveWebs If TRUE, perform Glue 3D algorithm.
1837 * \param theMaterials Material indices for each shape. Make sence, only if theRemoveWebs is TRUE.
1839 * \return New GEOM_Object, containing the result shapes.
1841 GEOM_Object MakePartition (in ListOfGO theShapes,
1842 in ListOfGO theTools,
1843 in ListOfGO theKeepInside,
1844 in ListOfGO theRemoveInside,
1846 in boolean theRemoveWebs,
1847 in ListOfLong theMaterials,
1848 in short theKeepNonlimitShapes);
1851 * Perform partition operation.
1852 * This method may be usefull if it is needed to make a partition for
1853 * a compound containing nonintersected shapes. Performance will be better
1854 * since intersection between shapes from compound is not performed.
1856 * Description of all parameters as in previous method MakePartition()
1858 * \note Passed compounds (via ListShapes or via ListTools)
1859 * have to consist of nonintersecting shapes.
1861 * \return New GEOM_Object, containing the result shapes.
1863 GEOM_Object MakePartitionNonSelfIntersectedShape (in ListOfGO theShapes,
1864 in ListOfGO theTools,
1865 in ListOfGO theKeepInside,
1866 in ListOfGO theRemoveInside,
1868 in boolean theRemoveWebs,
1869 in ListOfLong theMaterials,
1870 in short theKeepNonlimitShapes);
1873 * Perform partition of the Shape with the Plane
1874 * \param theShape Shape to be intersected.
1875 * \param thePlane Tool shape, to intersect theShape.
1876 * \return New GEOM_Object, containing the result shape.
1878 GEOM_Object MakeHalfPartition (in GEOM_Object theShape,
1879 in GEOM_Object thePlane);
1883 * GEOM_ICurvesOperations: Interface for curves creation.
1884 * Polyline, Circle, Spline (Bezier and Interpolation)
1886 interface GEOM_ICurvesOperations : GEOM_IOperations
1889 * Create a circle with given center, normal vector and radius.
1890 * \param thePnt Circle center.
1891 * \param theVec Vector, normal to the plane of the circle.
1892 * \param theR Circle radius.
1893 * \return New GEOM_Object, containing the created circle.
1895 GEOM_Object MakeCirclePntVecR (in GEOM_Object thePnt,
1896 in GEOM_Object theVec,
1899 * Create a circle, passing through three given points
1900 * \param thePnt1,thePnt2,thePnt3 Points, defining the circle.
1901 * \return New GEOM_Object, containing the created circle.
1903 GEOM_Object MakeCircleThreePnt (in GEOM_Object thePnt1,
1904 in GEOM_Object thePnt2,
1905 in GEOM_Object thePnt3);
1907 * Create a circle with given center, with a radius equals the distance from center to Point1
1908 * and on a plane defined by all of three points.
1909 * \param thePnt1,thePnt2,thePnt3 Points, defining the circle.
1910 * \return New GEOM_Object, containing the created circle.
1912 GEOM_Object MakeCircleCenter2Pnt (in GEOM_Object thePnt1,
1913 in GEOM_Object thePnt2,
1914 in GEOM_Object thePnt3);
1916 * Create an ellipse with given center, normal vector and radiuses.
1917 * \param thePnt Ellipse center.
1918 * \param theVec Vector, normal to the plane of the ellipse.
1919 * \param theRMajor Major ellipse radius.
1920 * \param theRMinor Minor ellipse radius.
1921 * \return New GEOM_Object, containing the created ellipse.
1923 GEOM_Object MakeEllipse (in GEOM_Object thePnt,
1924 in GEOM_Object theVec,
1925 in double theRMajor,
1926 in double theRMinor);
1929 * Create an arc of circle, passing through three given points.
1930 * \param thePnt1 Start point of the arc.
1931 * \param thePnt2 Middle point of the arc.
1932 * \param thePnt3 End point of the arc.
1933 * \return New GEOM_Object, containing the created arc.
1935 GEOM_Object MakeArc (in GEOM_Object thePnt1,
1936 in GEOM_Object thePnt2,
1937 in GEOM_Object thePnt3);
1940 * Create an arc of circle of center C from one point to another
1941 * \param theCenter Center point of the arc.
1942 * \param thePnt1 Start point of the arc.
1943 * \param thePnt2 End point of the arc.
1944 * \param theSense Orientation of the arc
1945 * \return New GEOM_Object, containing the created arc.
1947 GEOM_Object MakeArcCenter (in GEOM_Object theCenter,
1948 in GEOM_Object thePnt1,
1949 in GEOM_Object thePnt2,
1950 in boolean theSense);
1954 * Create a polyline on the set of points.
1955 * \param thePoints Sequence of points for the polyline.
1956 * \return New GEOM_Object, containing the created polyline.
1958 GEOM_Object MakePolyline (in ListOfGO thePoints);
1961 * Create bezier curve on the set of points.
1962 * \param thePoints Sequence of points for the bezier curve.
1963 * \return New GEOM_Object, containing the created bezier curve.
1965 GEOM_Object MakeSplineBezier (in ListOfGO thePoints);
1968 * Create B-Spline curve on the set of points.
1969 * \param thePoints Sequence of points for the B-Spline curve.
1970 * \return New GEOM_Object, containing the created B-Spline curve.
1972 GEOM_Object MakeSplineInterpolation (in ListOfGO thePoints);
1975 * Create a sketcher (wire or face), following the textual description,
1976 * passed through \a theCommand argument. \n
1977 * Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
1978 * Format of the description string have to be the following:
1980 * "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
1983 * - x1, y1 are coordinates of the first sketcher point (zero by default),
1985 * - "R angle" : Set the direction by angle
1986 * - "D dx dy" : Set the direction by DX & DY
1989 * - "TT x y" : Create segment by point at X & Y
1990 * - "T dx dy" : Create segment by point with DX & DY
1991 * - "L length" : Create segment by direction & Length
1992 * - "IX x" : Create segment by direction & Intersect. X
1993 * - "IY y" : Create segment by direction & Intersect. Y
1996 * - "C radius length" : Create arc by direction, radius and length(in degree)
1999 * - "WW" : Close Wire (to finish)
2000 * - "WF" : Close Wire and build face (to finish)
2002 * \param theCommand String, defining the sketcher in local
2003 * coordinates of the working plane.
2004 * \param theWorkingPlane Nine double values, defining origin,
2005 * OZ and OX directions of the working plane.
2006 * \return New GEOM_Object, containing the created wire.
2008 GEOM_Object MakeSketcher (in string theCommand, in ListOfDouble theWorkingPlane);
2011 * Create a sketcher (wire or face), following the textual description,
2012 * passed through \a theCommand argument. \n
2013 * For format of the description string see the previous method.\n
2014 * \param theCommand String, defining the sketcher in local
2015 * coordinates of the working plane.
2016 * \param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
2017 * \return New GEOM_Object, containing the created wire.
2019 GEOM_Object MakeSketcherOnPlane (in string theCommand, in GEOM_Object theWorkingPlane);
2023 * GEOM_ILocalOperations: Interface for fillet and chamfer creation.
2025 interface GEOM_ILocalOperations : GEOM_IOperations
2028 * Perform a fillet on all edges of the given shape.
2029 * \param theShape Shape, to perform fillet on.
2030 * \param theR Fillet radius.
2031 * \return New GEOM_Object, containing the result shape.
2033 GEOM_Object MakeFilletAll (in GEOM_Object theShape,
2037 * Perform a fillet on the specified edges of the given shape
2038 * \param theShape Shape, to perform fillet on.
2039 * \param theR Fillet radius.
2040 * \param theEdges Global indices of edges to perform fillet on.
2041 * \note Global index of sub-shape can be obtained, using method
2042 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2043 * \return New GEOM_Object, containing the result shape.
2045 GEOM_Object MakeFilletEdges (in GEOM_Object theShape,
2047 in ListOfLong theEdges);
2048 GEOM_Object MakeFilletEdgesR1R2 (in GEOM_Object theShape,
2051 in ListOfLong theEdges);
2054 * Perform a fillet on all edges of the specified faces of the given shape.
2055 * \param theShape Shape, to perform fillet on.
2056 * \param theR Fillet radius.
2057 * \param theFaces Global indices of faces to perform fillet on.
2058 * \note Global index of sub-shape can be obtained, using method
2059 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2060 * \return New GEOM_Object, containing the result shape.
2062 GEOM_Object MakeFilletFaces (in GEOM_Object theShape,
2064 in ListOfLong theFaces);
2065 GEOM_Object MakeFilletFacesR1R2 (in GEOM_Object theShape,
2068 in ListOfLong theFaces);
2071 * Perform a symmetric chamfer on all edges of the given shape.
2072 * \param theShape Shape, to perform chamfer on.
2073 * \param theD Chamfer size along each face.
2074 * \return New GEOM_Object, containing the result shape.
2076 GEOM_Object MakeChamferAll (in GEOM_Object theShape,
2080 * Perform a chamfer on edges, common to the specified faces.
2081 * with distance D1 on the Face1
2082 * \param theShape Shape, to perform chamfer on.
2083 * \param theD1 Chamfer size along \a theFace1.
2084 * \param theD2 Chamfer size along \a theFace2.
2085 * \param theFace1,theFace2 Global indices of two faces of \a theShape.
2086 * \note Global index of sub-shape can be obtained, using method
2087 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2088 * \return New GEOM_Object, containing the result shape.
2090 GEOM_Object MakeChamferEdge (in GEOM_Object theShape,
2091 in double theD1, in double theD2,
2092 in long theFace1, in long theFace2);
2094 * The Same but with params theD = Chamfer Lenght
2095 * and theAngle = Chamfer Angle (Angle in radians)
2097 GEOM_Object MakeChamferEdgeAD (in GEOM_Object theShape,
2098 in double theD, in double theAngle,
2099 in long theFace1, in long theFace2);
2102 * Perform a chamfer on all edges of the specified faces.
2103 * with distance D1 on the first specified face (if several for one edge)
2104 * \param theShape Shape, to perform chamfer on.
2105 * \param theD1 Chamfer size along face from \a theFaces. If both faces,
2106 * connected to the edge, are in \a theFaces, \a theD1
2107 * will be get along face, which is nearer to \a theFaces beginning.
2108 * \param theD2 Chamfer size along another of two faces, connected to the edge.
2109 * \param theFaces Sequence of global indices of faces of \a theShape.
2110 * \note Global index of sub-shape can be obtained, using method
2111 * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2112 * \return New GEOM_Object, containing the result shape.
2114 GEOM_Object MakeChamferFaces (in GEOM_Object theShape,
2115 in double theD1, in double theD2,
2116 in ListOfLong theFaces);
2118 * The Same but with params theD = Chamfer Lenght
2119 * and theAngle = Chamfer Angle (Angle in radians)
2121 GEOM_Object MakeChamferFacesAD (in GEOM_Object theShape,
2122 in double theD, in double theAngle,
2123 in ListOfLong theFaces);
2126 * Perform a chamfer on edges,
2127 * with distance D1 on the first specified face (if several for one edge)
2128 * \param theShape Shape, to perform chamfer on.
2129 * \param theD1 theD2 Chamfer size
2130 * \param theEdges Sequence of edges of \a theShape.
2131 * \return New GEOM_Object, containing the result shape.
2133 GEOM_Object MakeChamferEdges (in GEOM_Object theShape,
2134 in double theD1, in double theD2,
2135 in ListOfLong theEdges);
2137 * The Same but with params theD = Chamfer Lenght
2138 * and theAngle = Chamfer Angle (Angle in radians)
2140 GEOM_Object MakeChamferEdgesAD (in GEOM_Object theShape,
2141 in double theD, in double theAngle,
2142 in ListOfLong theEdges);
2145 * Perform an Archimde operation on the given shape with given parameters.
2146 * The object presenting the resulting face is returned
2147 * \param theShape Shape to be put in water.
2148 * \param theWeight Weight og the shape.
2149 * \param theWaterDensity Density of the water.
2150 * \param theMeshDeflection Deflection od the mesh, using to compute the section.
2151 * \return New GEOM_Object, containing a section of \a theShape
2152 * by a plane, corresponding to water level.
2154 GEOM_Object MakeArchimede (in GEOM_Object theShape,
2155 in double theWeight,
2156 in double theWaterDensity,
2157 in double theMeshDeflection);
2160 * Duplicates <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
2161 * Present here only for compatibility.
2163 long GetSubShapeIndex (in GEOM_Object theShape, in GEOM_Object theSubShape);
2167 * GEOM_IHealingOperations: Interface for shape healing operations.
2168 * Shape Processing, SuppressFaces, etc.
2170 interface GEOM_IHealingOperations : GEOM_IOperations
2173 * Apply a sequence of Shape Healing operators to the given object.
2174 * \param theShapes Shape to be processed.
2175 * \param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
2176 * \param theParameters List of names of parameters
2177 * ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
2178 * \param theValues List of values of parameters, in the same order
2179 * as parameters are listed in \a theParameters list.
2180 * \return New GEOM_Object, containing processed shape.
2182 GEOM_Object ProcessShape (in GEOM_Object theShapes,
2183 in string_array theOperators,
2184 in string_array theParameters,
2185 in string_array theValues);
2188 * Get default sequence of operators, their parameters and parameters' values
2189 * of Shape Process operation. In the current implementation the defaults are
2190 * read from the file pointed by CSF_ShHealingDefaults environmental variable.
2191 * \param theOperators Output. Default list of names of operators.
2192 * \param theParameters Output. Default list of names of parameters.
2193 * \param theValues Output. List of default values of parameters, in the same order
2194 * as parameters are listed in \a theParameters list.
2196 void GetShapeProcessParameters (out string_array theOperators,
2197 out string_array theParameters,
2198 out string_array theValues);
2200 * Get parameters and parameters' values for the given Shape Process operation.
2201 * In the current implementation the defaults are
2202 * read from the file pointed by CSF_ShHealingDefaults environmental variable.
2203 * \param theOperator Input. The operator's name.
2204 * \param theParameters Output. Default list of names of parameters.
2205 * \param theValues Output. List of default values of parameters, in the same order
2206 * as parameters are listed in \a theParameters list.
2208 void GetOperatorParameters (in string theOperator,
2209 out string_array theParameters,
2210 out string_array theValues);
2213 * Remove faces from the given object (shape).
2214 * \param theObject Shape to be processed.
2215 * \param theFaces Indices of faces to be removed, if EMPTY then the method
2216 * removes ALL faces of the given object.
2217 * \return New GEOM_Object, containing processed shape.
2219 GEOM_Object SuppressFaces (in GEOM_Object theObject, in short_array theFaces);
2222 * Close an open wire.
2223 * \param theObject Shape to be processed.
2224 * \param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
2225 * if -1, then theObject itself is a wire.
2226 * \param isCommonVertex If TRUE : closure by creation of a common vertex,
2227 * If FALS : closure by creation of an edge between ends.
2228 * \return New GEOM_Object, containing processed shape.
2230 GEOM_Object CloseContour (in GEOM_Object theObject, in short_array theWires,
2231 in boolean isCommonVertex);
2234 * Remove internal wires and edges from the given object (face).
2235 * \param theObject Shape to be processed.
2236 * \param theWires Indices of wires to be removed, if EMPTY then the method
2237 * removes ALL internal wires of the given object.
2238 * \return New GEOM_Object, containing processed shape.
2240 GEOM_Object RemoveIntWires (in GEOM_Object theObject, in short_array theWires);
2243 * Remove internal closed contours (holes) from the given object.
2244 * \param theObject Shape to be processed.
2245 * \param theWires Indices of wires to be removed, if EMPTY then the method
2246 * removes ALL internal holes of the given object
2247 * \return New GEOM_Object, containing processed shape.
2249 GEOM_Object FillHoles (in GEOM_Object theObject, in short_array theWires);
2252 * Sewing of the given object.
2253 * \param theObject Shape to be processed.
2254 * \param theTolerance Required tolerance value.
2255 * \return New GEOM_Object, containing processed shape.
2257 GEOM_Object Sew (in GEOM_Object theObject, in double theTolerance);
2260 * Addition of a point to a given edge object.
2261 * \param theObject Shape to be processed.
2262 * \param theEdgeIndex Index of edge to be divided within theObject's shape,
2263 * if -1, then theObject itself is the edge.
2264 * \param theValue Value of parameter on edge or length parameter,
2265 * depending on \a isByParameter.
2266 * \param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
2267 * if FALSE : \a theValue is treated as a length parameter [0..1]
2268 * \return New GEOM_Object, containing processed shape.
2270 GEOM_Object DivideEdge (in GEOM_Object theObject, in short theEdgeIndex,
2271 in double theValue, in boolean isByParameter);
2274 * Get a list of wires (wrapped in GEOM_Object-s),
2275 * that constitute a free boundary of the given shape.
2276 * \param theObject Shape to get free boundary of.
2277 * \param theClosedWires Output. Closed wires on the free boundary of the given shape.
2278 * \param theOpenWires Output. Open wires on the free boundary of the given shape.
2279 * \return FALSE, if an error(s) occured during the method execution.
2281 boolean GetFreeBoundary (in GEOM_Object theObject,
2282 out ListOfGO theClosedWires,
2283 out ListOfGO theOpenWires);
2286 * Change orientation of the given object.
2287 * \param theObject Shape to be processed.
2288 * \return New GEOM_Object, containing processed shape.
2290 GEOM_Object ChangeOrientation (in GEOM_Object theObject);
2291 GEOM_Object ChangeOrientationCopy (in GEOM_Object theObject);
2296 * GEOM_IInsertOperations: Interface for shape insert operations (like copy, import).
2299 interface GEOM_IInsertOperations : GEOM_IOperations
2302 * Create a copy of the given object
2304 GEOM_Object MakeCopy (in GEOM_Object theOriginal);
2307 * Export the given shape into a file with given name.
2308 * \param theObject Shape to be stored in the file.
2309 * \param theFileName Name of the file to store the given shape in.
2310 * \param theFormatName Specify format for the shape storage.
2311 * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
2313 void Export (in GEOM_Object theObject, in string theFileName, in string theFormatName);
2316 * Import a shape from the BRep or IGES or STEP file
2317 * (depends on given format) with given name.
2318 * \param theFileName The file, containing the shape.
2319 * \param theFormatName Specify format for the file reading.
2320 * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
2321 * \return New GEOM_Object, containing the imported shape.
2323 GEOM_Object Import (in string theFileName, in string theFormatName);
2326 * Get the supported import formats and corresponding patterns for File dialog.
2327 * \param theFormats Output. List of formats, available for import.
2328 * \param thePatterns Output. List of file patterns, corresponding to available formats.
2329 * \return Returns available formats and patterns through the arguments.
2331 void ImportTranslators (out string_array theFormats,
2332 out string_array thePatterns);
2335 * Get the supported export formats and corresponding patterns for File dialog.
2336 * \param theFormats Output. List of formats, available for export.
2337 * \param thePatterns Output. List of file patterns, corresponding to available formats.
2338 * \return Returns available formats and patterns through the arguments.
2340 void ExportTranslators (out string_array theFormats,
2341 out string_array thePatterns);
2345 * GEOM_IKindOfShape: namespace for shape_kind enumeration.
2347 interface GEOM_IKindOfShape
2357 SPHERE, // full sphere
2358 CYLINDER, // cylinder
2359 BOX, // box with faces, parallel to global coordinate planes
2360 ROTATED_BOX, // other box
2361 TORUS, // full torus
2363 POLYHEDRON, // solid, bounded by polygons
2364 SOLID, // other solid
2366 SPHERE2D, // spherical face (closed)
2367 CYLINDER2D, // cylindrical face with defined height
2368 TORUS2D, // toroidal face (closed)
2369 CONE2D, // conical face with defined height
2370 DISK_CIRCLE, // planar, bounded by circle
2371 DISK_ELLIPSE, // planar, bounded by ellipse
2372 POLYGON, // planar, bounded by segments
2373 PLANE, // infinite planar
2374 PLANAR, // other planar
2377 CIRCLE, // full circle
2378 ARC_CIRCLE, // arc of circle
2379 ELLIPSE, // full ellipse
2380 ARC_ELLIPSE, // arc of ellipse
2381 LINE, // infinite segment
2391 * GEOM_IMeasureOperations: Interface for measurement (distance, whatis) and
2392 * properties calculation (like Centre of Mass, Inertia, etc.).
2395 interface GEOM_IMeasureOperations : GEOM_IOperations
2398 * Get kind of theShape.
2399 * \param theShape Shape to get a kind of.
2400 * \param theIntegers Output. Integer and enumerated shape's parameters
2401 * (kind of surface, closed/unclosed, number of edges, etc.)
2402 * \param theDoubles Output. Double shape's parameters (coordinates, dimensions, etc.)
2403 * \note Concrete meaning of each value, returned via \a theIntegers
2404 * or \a theDoubles list depends on the kind of the shape.
2405 * \return Returns a kind of shape in terms of <VAR>GEOM_IKindOfShape.shape_kind</VAR> enumeration.
2407 //short KindOfShape (in GEOM_Object theShape,
2408 GEOM_IKindOfShape::shape_kind KindOfShape (in GEOM_Object theShape,
2409 out ListOfLong theIntegers,
2410 out ListOfDouble theDoubles);
2413 * Get position (LCS) of theShape.
2414 * \param theShape Shape to calculate position of.
2415 * \param Ox,Oy,Oz Output. Coordinates of shape's location origin.
2416 * Origin of the LCS is situated at the shape's center of mass.
2417 * \param Zx,Zy,Zz Output. Coordinates of shape's location normal(main) direction.
2418 * \param Xx,Xy,Xz Output. Coordinates of shape's location X direction.
2419 * Axes of the LCS are obtained from shape's location or,
2420 * if the shape is a planar face, from position of its plane.
2421 * \return Returns position of the shape through the last nine arguments.
2423 void GetPosition (in GEOM_Object theShape,
2424 out double Ox, out double Oy, out double Oz,
2425 out double Zx, out double Zy, out double Zz,
2426 out double Xx, out double Xy, out double Xz);
2429 * Get summarized length of all wires,
2430 * area of surface and volume of the given shape.
2431 * \param theShape Shape to define properties of.
2432 * \param theLength Output. Summarized length of all wires of the given shape.
2433 * \param theSurfArea Output. Area of surface of the given shape.
2434 * \param theVolume Output. Volume of the given shape.
2435 * \return Returns shape properties through the last three arguments.
2437 void GetBasicProperties (in GEOM_Object theShape,
2438 out double theLength,
2439 out double theSurfArea,
2440 out double theVolume);
2443 * Get a point, situated at the centre of mass of theShape.
2444 * \param theShape Shape to define centre of mass of.
2445 * \return New GEOM_Object, containing the created point.
2447 GEOM_Object GetCentreOfMass (in GEOM_Object theShape);
2450 * Get a vector, representing the normal of theFace.
2451 * If the face is not planar, theOptionalPoint is obligatory.
2452 * \param theFace Shape (face) to define the normal of.
2453 * \param theOptionalPoint Shape (point) to define the normal at.
2454 * Can be NULL in case of planar face.
2455 * \return New GEOM_Object, containing the created normal vector.
2457 GEOM_Object GetNormal (in GEOM_Object theFace,
2458 in GEOM_Object theOptionalPoint);
2461 * Get inertia matrix and moments of inertia of theShape.
2462 * \param theShape Shape to calculate inertia of.
2463 * \param I(1-3)(1-3) Output. Components of the inertia matrix of the given shape.
2464 * \param Ix,Iy,Iz Output. Moments of inertia of the given shape.
2465 * \return Returns inertia through the last twelve arguments.
2467 void GetInertia (in GEOM_Object theShape,
2468 out double I11, out double I12, out double I13,
2469 out double I21, out double I22, out double I23,
2470 out double I31, out double I32, out double I33,
2471 out double Ix , out double Iy , out double Iz);
2474 * Get parameters of bounding box of the given shape
2475 * \param theShape Shape to obtain bounding box of.
2476 * \param Xmin,Xmax Output. Limits of shape along OX axis.
2477 * \param Ymin,Ymax Output. Limits of shape along OY axis.
2478 * \param Zmin,Zmax Output. Limits of shape along OZ axis.
2479 * \return Returns parameters of bounding box through the last six arguments.
2481 void GetBoundingBox (in GEOM_Object theShape,
2482 out double Xmin, out double Xmax,
2483 out double Ymin, out double Ymax,
2484 out double Zmin, out double Zmax);
2487 * Get min and max tolerances of sub-shapes of theShape
2488 * \param theShape Shape, to get tolerances of.
2489 * \param FaceMin,FaceMax Output. Min and max tolerances of the faces.
2490 * \param EdgeMin,EdgeMax Output. Min and max tolerances of the edges.
2491 * \param VertMin,VertMax Output. Min and max tolerances of the vertices.
2492 * \return Returns shape tolerances through the last six arguments.
2494 void GetTolerance (in GEOM_Object theShape,
2495 out double FaceMin, out double FaceMax,
2496 out double EdgeMin, out double EdgeMax,
2497 out double VertMin, out double VertMax);
2500 * Check a topology of the given shape.
2501 * \param theShape Shape to check validity of.
2502 * \param theDescription Output. Description of problems in the shape, if they are.
2503 * \return TRUE, if the shape "seems to be valid" from the topological point of view.
2505 boolean CheckShape (in GEOM_Object theShape,
2506 out string theDescription);
2509 * Check a topology and a geometry of the given shape.
2510 * \param theShape Shape to check validity of.
2511 * \param theDescription Output. Description of problems in the shape, if they are.
2512 * \return TRUE, if the shape "seems to be valid".
2514 boolean CheckShapeWithGeometry (in GEOM_Object theShape,
2515 out string theDescription);
2518 * Obtain description of the given shape
2519 * \param theShape Shape to be described.
2520 * \return Description of the given shape.
2522 string WhatIs (in GEOM_Object theShape);
2525 * Get minimal distance between the given shapes.
2526 * \param theShape1,theShape2 Shapes to find minimal distance between.
2527 * \param X1,Y1,Z1 Output. Coordinates of point on theShape1, nearest to theShape2.
2528 * \param X2,Y2,Z2 Output. Coordinates of point on theShape2, nearest to theShape1.
2529 * \return Value of the minimal distance between the given shapes.
2531 double GetMinDistance (in GEOM_Object theShape1, in GEOM_Object theShape2,
2532 out double X1, out double Y1, out double Z1,
2533 out double X2, out double Y2, out double Z2);
2536 * Get angle between the given lines or linear edges.
2537 * \param theShape1,theShape2 Shapes to find angle between. Lines or linear edges.
2538 * \return Value of the angle between the given shapes.
2540 double GetAngle (in GEOM_Object theShape1, in GEOM_Object theShape2);
2543 * Get point coordinates
2545 void PointCoordinates (in GEOM_Object theShape, out double X, out double Y, out double Z);
2550 * GEOM_IGroupOperations: Interface for groups creation.
2552 interface GEOM_IGroupOperations : GEOM_IOperations
2555 * Creates a new group which will store sub shapes of theMainShape
2556 * \param theMainShape is a GEOM object on which the group is selected
2557 * \param theShapeType defines a shape type of the group
2558 * \return a newly created GEOM group
2560 GEOM_Object CreateGroup (in GEOM_Object theMainShape, in long theShapeType);
2563 * Adds a sub object with ID theSubShapeId to the group
2564 * \param theGroup is a GEOM group to which the new sub shape is added
2565 * \param theSubShapeId is a sub shape ID in the main object.
2566 * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
2568 void AddObject (in GEOM_Object theGroup, in long theSubShapeId);
2571 * Removes a sub object with ID \a theSubShapeId from the group
2572 * \param theGroup is a GEOM group from which the sub shape is removed.
2573 * \param theSubShapeId is a sub shape ID in the main object.
2574 * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
2576 void RemoveObject (in GEOM_Object theGroup, in long theSubShapeId);
2579 * Adds to the group all the given shapes. No errors, if some shapes are alredy included.
2580 * \param theGroup is a GEOM group to which the new sub shapes are added.
2581 * \param theSubShapes is a list of sub shapes to be added.
2583 void UnionList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
2586 * Removes from the group all the given shapes. No errors, if some shapes are not included.
2587 * \param theGroup is a GEOM group from which the sub-shapes are removed.
2588 * \param theSubShapes is a list of sub-shapes to be removed.
2590 void DifferenceList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
2593 * Adds to the group all the given shapes. No errors, if some shapes are alredy included.
2594 * \param theGroup is a GEOM group to which the new sub shapes are added.
2595 * \param theSubShapes is a list of IDs of sub shapes to be added.
2597 void UnionIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
2600 * Removes from the group all the given shapes. No errors, if some shapes are not included.
2601 * \param theGroup is a GEOM group from which the sub-shapes are removed.
2602 * \param theSubShapes is a list of IDs of sub-shapes to be removed.
2604 void DifferenceIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
2607 * Returns a type of sub objects stored in the group
2608 * \param theGroup is a GEOM group which type is returned.
2610 long GetType (in GEOM_Object theGroup);
2613 * Returns a main shape associated with the group
2614 * \param theGroup is a GEOM group for which a main shape object is requested
2615 * \return a GEOM object which is a main shape for theGroup
2617 GEOM_Object GetMainShape (in GEOM_Object theGroup);
2620 * Returns a list of sub objects ID stored in the group
2621 * \param theGroup is a GEOM group for which a list of IDs is requested
2623 ListOfLong GetObjects (in GEOM_Object theGroup);
2628 * GEOM_Gen: Interface to access other GEOM interfaces.
2629 * Also contains some methods to access and manage GEOM objects.
2631 interface GEOM_Gen : Engines::Component,SALOMEDS::Driver
2634 * Undo/Redo Management
2637 void Undo (in long theStudyID);
2639 void Redo (in long theStudyID);
2642 * Publishing manangement
2643 * Adds in theStudy a object theObject under with a name theName,
2644 * if theFather is not NULL the object is placed under thFather's SObject.
2645 * Returns a SObject where theObject is placed
2647 SALOMEDS::SObject AddInStudy (in SALOMEDS::Study theStudy,
2648 in GEOM_Object theObject,
2650 in GEOM_Object theFather);
2653 * Methods to access interfaces for objects creation and transformation
2655 GEOM_IBasicOperations GetIBasicOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2656 GEOM_ITransformOperations GetITransformOperations(in long theStudyID) raises (SALOME::SALOME_Exception);
2657 GEOM_I3DPrimOperations GetI3DPrimOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2658 GEOM_IShapesOperations GetIShapesOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2659 GEOM_IBooleanOperations GetIBooleanOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2660 GEOM_ICurvesOperations GetICurvesOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2661 GEOM_ILocalOperations GetILocalOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2662 GEOM_IHealingOperations GetIHealingOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2663 GEOM_IInsertOperations GetIInsertOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2664 GEOM_IMeasureOperations GetIMeasureOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2665 GEOM_IBlocksOperations GetIBlocksOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2666 GEOM_IGroupOperations GetIGroupOperations (in long theStudyID) raises (SALOME::SALOME_Exception);
2669 * Objects Management
2673 * Removes the object from the GEOM component
2674 * \param theObject is a GEOM object to be removed
2676 void RemoveObject (in GEOM_Object theObject);
2679 * Returns an object defined by the study and its entry in the GEOM component
2680 * \param theStudyID is a SALOMEDS Study ID
2681 * \param theEntry is an entry of the requested GEOM object in the GEOM component
2682 * \note if the object has not previously been created a NULL GEOM object is returned
2684 GEOM_Object GetObject (in long theStudyID, in string theEntry);
2687 * Add a sub shape defined by indices in \a theIndices
2688 * (contains unique IDs of sub shapes inside theMainShape)
2689 * \note The sub shape GEOM_Objects can has ONLY ONE function.
2690 * Don't try to apply modification operations on them.
2691 * \note Internal method
2693 GEOM_Object AddSubShape (in GEOM_Object theMainShape, in ListOfLong theIndices);
2696 * GEOM object's IOR Management
2700 * Returns a GEOM Object defined by its IOR
2701 * \param theIOR a string containg an IOR of the requested GEOM object
2703 GEOM_Object GetIORFromString (in string theIOR);
2706 * Returns a string which contains an IOR of the GEOM object
2707 * \param theObject is a GEOM object which IOR is requested
2709 string GetStringFromIOR (in GEOM_Object theObject);
2712 * Returns a name with which a GEOM object was dumped into python script
2713 * \param theStudyEntry is an entry of the GEOM object in the study
2715 string GetDumpName (in string theStudyEntry);
2718 * Returns all names with which a GEOM objects was dumped
2719 * into python script to avoid the same names in SMESH script
2721 string_array GetAllDumpNames();