3 ####################################################################################
5 # Created : Thu Dec 18 12:01:00 2002
6 # Author : Vadim SANDLER, Open CASCADE SAS (vadim.sandler@opencascade.com)
8 # Module : Installation Wizard
9 # Copyright : 2002-2006 CEA
11 # This script is the part of the SALOME installation procedure.
13 ####################################################################################
16 export SHRC="salome.sh"
17 export CSHRC="salome.csh"
19 #this function takes several parameters
20 #first parameter contains descriptor of output file
21 #next parameters is command for execution
22 #in case of bad result of execution ask user about furher steps
23 #(user can cancel installation procedure)
29 if [ -n "$INSTALL_WORK" ] ; then errfile=$INSTALL_WORK/errlog; fi
31 if [ "$out" != "1" ] ; then cmd="$cmd >> $out" ; fi
33 if [ "$out" != "1" ] ; then
38 if [ "$?" -ne "0" ] ; then
39 if [ $out != "1" ] ; then
44 # VSR : 10/11/05: disable answer mode ==>
46 #echo -e "NOT DONE !!! => $*"
47 #echo -n "Would you like to continue to install this product: (Y,N) [Y] : "
49 #rep=`echo $rep | tr "[A-Z]" "[a-z]"`
50 #if test -z $rep || [ $rep = "y" ] ; then
53 # VSR : 10/11/05: disable answer mode <==
59 #invoke check_job function
60 #all output will be put into terminal
70 rm -rf "$1" > /dev/null
74 #create environment for sh and csh
77 install_root=$1; shift
79 for i in $SHRC $CSHRC ; do
80 if [ -e ${install_work}/$i ]; then
83 touch ${install_work}/$i
86 if [ $# -eq 3 ] ; then
88 product_env=${install_work}/env_${product_name}.sh
89 (test -e ${product_env} && rm ${product_env} )
91 ### !!! writing salome.sh file !!! -> define INSTALL_ROOT
92 cat >> ${install_work}/$SHRC <<EOF
93 #${DELIM} Setting products installation directory ${DELIM}
94 export INSTALL_ROOT=${install_root}
96 #${DELIM} Environment switch: 0 for SALOME building, 1 for SALOME launching ${DELIM}
97 export ENV_FOR_LAUNCH=1
100 ### !!! The next is for RedHat 9 only !!!
101 if [ -f /etc/redhat-release ] ; then
102 grep -e "Red Hat Linux release 9" /etc/redhat-release > /dev/null
103 if [ $? -eq 0 ] ; then
104 cat >> ${install_work}/$SHRC <<EOF
105 #${DELIM} Force RH9 to use old implementation of threads ${DELIM}
106 export LD_ASSUME_KERNEL=2.4.18
111 ### !!! writing salome.csh file !!! -> set inital variables
112 pre_vars="PATH LD_LIBRARY_PATH LD_RUN_PATH PYTHONPATH TCLLIBPATH"
113 for i in $pre_vars ; do
114 cat >> ${install_work}/$CSHRC <<EOF
115 #${DELIM} setting initial ${i} ${DELIM}
116 if (! (\$?${i}) ) then
123 ### !!! writing salome.(c)sh files !!! -> dump products environment files, changing 'export' by 'setenv(a|p)' where necessary
124 ### Note, that for performance reasons temporary environment files used during installation procedure itself
125 ### are created without using setenv(a|p) aliases.
127 # 1. first dump all environment files into the $SHRC file
128 product_sequence="$2"
129 for i in $product_sequence ; do
130 env_file=${install_work}/env_${i}.sh
131 ( test -e $env_file && cat $env_file >> ${install_work}/$SHRC 2>/dev/null )
134 # 2. writing global functions to _salome.sh file
135 cat >> ${install_work}/_$SHRC <<EOF
136 ##########################################################################
137 # Functions exporta and exportp are used to append/prepend correspondingly
138 # one directory or a set of directories separated by semicolon symbol (':')
139 # to the environment variables like PATH, LD_LIBRARY_PATH, PYTHONPATH,
141 # The main purpose is to replace default setenv command behavior:
142 # exporta, exportp also remove duplicated entries, shortening in that way
143 # the environment variables.
144 # If some directory being added is already included into the variable
145 # nothing is done for it.
146 # Note, that these functions work some slower that setenv command itself.
149 # appends/prepends set of directories (second parameter)
150 # to the another set of directories (first parameter) and
151 # removes duplicated entries;
152 # the third parameter defines the mode: 0 - append, 1 - prepend
154 out_var=\`echo \$1 \$2 | awk -v dir=\$3 '{ \\
155 na = split(\$2,a,":"); \\
159 if(\$1 != "<empty>") { \\
160 nb = split(\$1,b,":"); \\
161 for(i=1;i<=nb;i++) { \\
162 if(!(b[i] in ccc) ) { \\
170 for(i=1;i<=na;i++) { \\
171 if(!(a[i] in ccc)) { \\
178 for(i=1;i<k2;i++) { \\
181 for(i=1;i<k1;i++) { \\
186 for(i=1;i<k1;i++) { \\
189 for(i=1;i<k2;i++) { \\
193 }' | sed -e 's/\(.*\):/\1/g'\`
197 # appends directory or set of directories, separated by ':' (second parameter)
198 # to the variable (first parameter)
200 xenv=\`printenv \$1\`
201 if [ -z "\$xenv" ]; then xenv="<empty>"; fi
202 out_var=\`cleandup \$xenv \$2 0\`
206 # prepends directory or set of directories, separated by ':' (second parameter)
207 # to the variable (first parameter)
209 xenv=\`printenv \$1\`
210 if [ -z "\$xenv" ]; then xenv="<empty>"; fi
211 out_var=\`cleandup \$xenv \$2 1\`
214 ###########################################################################
218 # 3. writing global functions to _salome.csh file
219 cat >> ${install_work}/_$CSHRC <<EOF
221 ###########################################################################
222 # Aliases setenva and setenvp are used to append/prepend correspondingly
223 # one directory or a set of directories separated by semicolon symbol (':')
224 # to the environment variables like PATH, LD_LIBRARY_PATH, PYTHONPATH,
226 # The main purpose is to replace default setenv command behavior:
227 # setenva, setenvp also remove duplicated entries, shortening in that way
228 # the environment variables.
229 # If some directory being added is already included into the variable
230 # nothing is done for it.
231 # Note, that these aliases work some slower that setenv command itself.
234 # appends/prepends set of directories (second parameter)
235 # to the another set of directories (first parameter) and
236 # removes duplicated entries;
237 # the third parameter defines the mode: 0 - append, 1 - prepend
238 alias cleandup "echo \!:1 \!:2 | awk -v dir=\!:3 \\\\
239 '"'{ na = split(\$2,a,":"); \\\\
243 if(\$1 != "<empty>") { \\\\
244 nb = split(\$1,b,":"); \\\\
245 for(i=1;i<=nb;i++) { \\\\
246 if(!(b[i] in ccc) ) { \\\\
254 for(i=1;i<=na;i++) { \\\\
255 if(!(a[i] in ccc)) { \\\\
262 for(i=1;i<k2;i++) { \\\\
265 for(i=1;i<k1;i++) { \\\\
270 for(i=1;i<k1;i++) { \\\\
273 for(i=1;i<k2;i++) { \\\\
277 }'"' | sed -e 's/\(.*\):/\1/g'"
279 # appends directory or set of directories, separated by ':' (second parameter)
280 # to the variable (first parameter)
281 alias setenva 'set a=\!:1 ; set b=\!:2 ; \\
282 set c=\`printenv \$a\` ; \\
283 set b=\`cleandup \$c \$b 0\` ; \\
288 # prepends directory or set of directories, separated by ':' (second parameter)
289 # to the variable (first parameter)
290 alias setenvp 'set a=\!:1 ; set b=\!:2 ; \\
291 set c=\`printenv \$a\` ; \\
292 set b=\`cleandup \$c \$b 1\` ; \\
295 ###########################################################################
298 cat ${install_work}/$CSHRC >> ${install_work}/_$CSHRC
300 # 4. put the contents of salome.sh to _salome.sh replacing export by export(a|p) aliases where necessary
301 sed -e 's%export\([[:blank:]]*\)PATH=\$[{]\?PATH[}]\?:\(.*\)%exporta\1PATH \2%g' -e 's%export\([[:blank:]]*\)PATH=\(.*\):\$[{]\?PATH[}]\?%exportp\1PATH \2%g' ${install_work}/$SHRC > ${INSTALL_WORK}/_tmp1 2>/dev/null
302 sed -e 's%export\([[:blank:]]*\)LD_LIBRARY_PATH=\$[{]\?LD_LIBRARY_PATH[}]\?:\(.*\)%exporta\1LD_LIBRARY_PATH \2%g' -e 's%export\([[:blank:]]*\)LD_LIBRARY_PATH=\(.*\):\$[{]\?LD_LIBRARY_PATH[}]\?%exportp\1LD_LIBRARY_PATH \2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
303 sed -e 's%export\([[:blank:]]*\)PYTHONPATH=\$[{]\?PYTHONPATH[}]\?:\(.*\)%exporta\1PYTHONPATH \2%g' -e 's%export\([[:blank:]]*\)PYTHONPATH=\(.*\):\$[{]\?PYTHONPATH[}]\?%exportp\1PYTHONPATH \2%g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
304 sed -e 's%export\([[:blank:]]*\)LD_RUN_PATH=\$[{]\?LD_RUN_PATH[}]\?:\(.*\)%exporta\1LD_RUN_PATH \2%g' -e 's%export\([[:blank:]]*\)LD_RUN_PATH=\(.*\):\$[{]\?LD_RUN_PATH[}]\?%exportp\1LD_RUN_PATH \2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2
306 # Setting "/usr/X11R6/lib" path in LD_LIBRARY_PATH for the libGL.so.1 file
307 if test `uname -m` = "x86_64" ; then
308 echo '# Setting /usr/X11R6/lib64 path in LD_LIBRARY_PATH for the libGL.so.1 file' >> ${INSTALL_WORK}/_tmp2
309 echo 'export LD_LIBRARY_PATH=/usr/X11R6/lib64:${LD_LIBRARY_PATH}' >> ${INSTALL_WORK}/_tmp2
311 echo '# Setting /usr/X11R6/lib path in LD_LIBRARY_PATH for the libGL.so.1 file' >> ${INSTALL_WORK}/_tmp2
312 echo 'export LD_LIBRARY_PATH=/usr/X11R6/lib:${LD_LIBRARY_PATH}' >> ${INSTALL_WORK}/_tmp2
315 cat ${INSTALL_WORK}/_tmp2 >> ${install_work}/_$SHRC
317 # 5. Create a salome.csh file from salome.sh by replacing export by setenv, etc.
318 sed -e 's%export \([[:alnum:]_[:blank:]]*\)\=%setenv \1 %g' ${install_work}/$SHRC > ${INSTALL_WORK}/_tmp1 2>/dev/null
319 cat ${INSTALL_WORK}/_tmp1 >> ${install_work}/$CSHRC
321 # 6. Create a _salome.csh file from _salome.sh by replacing export by setenv, exporta by setenva, etc.
322 sed -e 's%export \([[:alnum:]_[:blank:]]*\)\=%setenv \1 %g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
323 sed -e 's%exporta \([[:alnum:]_[:blank:]]*\)%setenva \1%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
324 sed -e 's%exportp \([[:alnum:]_[:blank:]]*\)%setenvp \1%g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
325 sed -e 's%if \[ -n "\${ENV_FOR_LAUNCH}" \] ; then%if ( ${?ENV_FOR_LAUNCH} ) then%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
326 sed -e 's%if \[ "\${ENV_FOR_LAUNCH}" == "1" \] ; then%if ( "\${ENV_FOR_LAUNCH}" == "1" ) then%g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
327 sed -e 's%^\([[:blank:]]*\)fi\([[:blank:]]*\)$%\1endif\2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
328 cat ${INSTALL_WORK}/_tmp2 >> ${install_work}/_$CSHRC 2>/dev/null
330 rm -f ${INSTALL_WORK}/_tmp1 ${INSTALL_WORK}/_tmp2
332 if [ $# -eq 4 ] ; then
334 if [ -e ${product_dir} ] ; then
335 cp -f ${install_work}/_$SHRC ${product_dir}/$SHRC
336 cp -f ${install_work}/_$CSHRC ${product_dir}/$CSHRC
339 sed -e 's%setenv ENV_FOR_LAUNCH 1%setenv ENV_FOR_LAUNCH 0%' ${install_work}/_$CSHRC > ${install_root}/env_build.csh
340 sed -e 's%export ENV_FOR_LAUNCH=1%export ENV_FOR_LAUNCH=0%' ${install_work}/_$SHRC > ${install_root}/env_build.sh
342 cp -f ${install_work}/_$CSHRC ${install_root}/env_products.csh
343 cp -f ${install_work}/_$SHRC ${install_root}/env_products.sh
345 rm -f ${install_work}/_$SHRC ${install_work}/_$CSHRC
346 ### !!! copying build.csh script
347 if [ -e ./build.csh ]; then
348 cp -f ./build.csh ${install_root}
350 ### !!! copying release notes
351 for p in `ls ../` ; do
352 export pdf=`echo ${p} | sed s/[.]/" "/g | awk '{print $2}'`
353 if [ "${pdf}" = "pdf" ]; then
355 if [ ! -e ${install_root}/${RN} ]; then
356 cp -f ../${RN} ${install_root}
363 #try use already existing product
366 product_dir=$1; install_root=$2; install_work=$3; product_sequence="$4"; product_type=$5
367 env_file=${product_dir}/env_${product_type}.sh
368 if [ -f ${env_file} ] ; then
369 cp -f ${env_file} ${install_work}
370 make_env ${install_root} ${install_work} "${product_sequence}"
371 source ${install_work}/$SHRC
373 if [ $? -eq 0 ] ; then
374 if [ -d ${product_dir} ] && [ -w ${product_dir} ] ; then
375 #makedir ${product_dir}
380 rm -f ${install_work}/env_${product_type}.sh
381 make_env ${install_root} ${install_work} "${product_sequence}"
387 #check existance of lib passed as first parameter
388 #return 0 if lib exists
389 #if you pass second parameter search will be done in it
390 #otherwise search will be done in $LD_LIBRARY_PATH
391 #you should use : as dilimeter if you are going to pass second parameter
396 whereIs=$LD_LIBRARY_PATH
398 for L in `echo ${whereIs} | sed -e"s%:% %g"` ; do
399 ret=`find $L -name $1 2>/dev/null`
400 if [ -n "$ret" ] ; then
401 #echo "The $1 exists on yours system in a $L folder"
411 for i in `echo ${path} | sed -e"s%:% %g"` ; do
412 ret=`find $i -name $file -maxdepth 1 2>/dev/null`
413 if [ -n "$ret" ] ; then
414 ret=`echo $ret | sed -e"s%/\$file$%%g"`
423 arg1=$1; val1=$2; arg2=$3; val2=$4
424 tmp="^$val1$|^$val1:|:$val1$|:$val1:"
425 #echo $val2 | grep -E "$tmp" >/dev/null 2>&1
426 #if [ $? -eq 0 ] ; then
431 exclude_list="usr lib bin sbin etc"
432 for i in ${exclude_list} ; do
434 echo ${val1} | grep -E "$tmp" >/dev/null 2>&1
435 if [ $? == 0 ] ; then to_tail=0; break; fi
437 if [ $to_tail -eq 0 ] ; then
446 maj_ver=`echo $1 | awk -F. '{if(NF>0) print $1; else print 0}'`
447 min_ver=`echo $1 | awk -F. '{if(NF>1) print $2; else print 0}'`
448 rel_ver=`echo $1 | awk -F. '{if(NF>2) print $3; else print 0}'`
449 let ver=$maj_ver*10000+$min_ver*100+$rel_ver
452 for i in `echo ${PATH}:/usr/bin:/usr/local/bin | sed -e"s%:% %g"` ; do
453 ret=`find $i -name gcc -maxdepth 1 2>/dev/null`
454 if [ -n "$ret" ] ; then
455 maj_ver=`$ret -dumpversion | awk -F. '{if(NF>0) print $1; else print 0}'`
456 min_ver=`$ret -dumpversion | awk -F. '{if(NF>1) print $2; else print 0}'`
457 rel_ver=`$ret -dumpversion | awk -F. '{if(NF>2) print $3; else print 0}'`
458 let ver1=$maj_ver*10000+$min_ver*100+$rel_ver
459 if [ $ver1 -eq $ver ] ; then
460 ret=`echo $ret | sed -e"s%/gcc$%%g"`
464 if [ $ver1 -gt $ver ] && [ $ver1 -gt $newerver ] ; then
466 newer=`echo $ret | sed -e"s%/gcc$%%g"`
470 if [ -n "$newer" ] ; then
478 if test -z "${TCLHOME}"; then
481 tclcfg=`find ${TCLHOME}/lib -name "tclConfig.sh" 2> /dev/null`
485 ver=`cat $f | grep -e "TCL_VERSION=.*" | sed -e "s%TCL_VERSION=[\'|\"]\(.*\)[\'|\"]%\1%g" | awk -F. '{x=0;for(i=1;i<=3;i++){x=x*100;if(i<=NF)x+=$i;}print x;}'`
486 if [ $maxver -lt $ver ]; then
491 if test -n "$file"; then
501 if test -z "${TCLHOME}"; then
504 tclcfg=`find ${TCLHOME}/lib -name "tkConfig.sh" 2> /dev/null`
508 ver=`cat $f | grep -e "TK_VERSION=.*" | sed -e "s%TK_VERSION=[\'|\"]\(.*\)[\'|\"]%\1%g" | awk -F. '{x=0;for(i=1;i<=3;i++){x=x*100;if(i<=NF)x+=$i;}print x;}'`
509 if [ $maxver -lt $ver ]; then
514 if test -n "$file"; then
524 if test -f /usr/X11R6/include/DPS/dpsconfig.h ; then
528 if test -f /usr/include/DPS/dpsconfig.h ; then
537 for d in /usr/X11R6/include /usr/include ; do
538 if [ -d ${d}/GL ] && [ -f ${d}/GL/gl.h ] ; then
548 # first search libGL.la file and check if this file is correct
549 for d in /usr/X11R6/lib64 /usr/lib64 /usr/X11R6/lib /usr/lib ; do
550 if [ -f ${d}/libGL.la ] ; then
551 libdir=`grep "libdir=" ${d}/libGL.la | sed -e "s%libdir='\(.*\)'%\1%"`
552 if [ "`ls $libdir/libGL.so* 2>/dev/null`" ] ; then
558 # then search libGL.so* file
559 for d in /usr/X11R6/lib64 /usr/lib64 /usr/X11R6/lib /usr/lib ; do
560 if [ "`ls ${d}/libGL.so* 2>/dev/null`" ] ; then
571 if [ -z "$ldir" ] || [ ! -d "$ldir" ]; then return 1; fi
575 SALOME_MODULES="`env | awk -F_ '/[[:alnum:]]*_ROOT_DIR/ { print $1 }'`"
579 la_files=`find . -name "*.la"`
581 for l in X ${la_files}; do
582 if [ "$l" != "X" ] ; then
586 # 1. process salome modules dependencies
587 for mod in $SALOME_MODULES; do
588 moddir=`printenv ${mod}_ROOT_DIR`
589 if [ -n "${moddir}" ] ; then
590 #echo $l $mod $moddir
591 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*${mod}[^[:space:]/]*/lib% \1${moddir}/lib%g" $l > $l"_"
595 # 2. process CAS.CADE dependencies
596 casdir=`printenv CASROOT`/lib
597 if [ ! -d ${casdir} ] ; then casdir=`printenv CASROOT`/Linux/lib ; fi
598 if [ ! -d ${casdir} ] ; then casdir=`printenv CASROOT`/lin/lib ; fi
599 if [ -n "${CASROOT}" ] && [ -d "${casdir}" ] ; then
600 # echo $l $CASROOT $casdir
601 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*\(OCT\|CAS\)[^[:space:]/]*/Linux/lib% \1${casdir}%g" \
602 -e "s%[[:space:]]\(-L\)\?[^[:space:]]*\(OCT\|CAS\)[^[:space:]/]*/lin/lib% \1${casdir}%g" \
603 -e "s%[[:space:]]\(-L\)\?[^[:space:]]*\(OCT\|CAS\)[^[:space:]/]*/lib% \1${casdir}%g" $l > $l"_"
606 # 3. process omniORB dependencies
607 omnidir=`printenv OMNIORBDIR`/lib/i586_linux_2.0_glibc2.1
608 if [ ! -d ${omnidir} ] ; then omnidir=`printenv OMNIORBDIR`/lib ; fi
609 if [ -n "${OMNIORBDIR}" ] && [ -d "${omnidir}" ] ; then
610 # echo $l $OMNIORBDIR $omnidir
611 sed -e "s%-L[^[:space:]]*omni[^[:space:]]*%-L${omnidir}%g" $l > $l"_"
614 # 4. process VTK dependencies
615 vtkdir=`printenv VTKHOME`/lib/vtk
616 if [ -n "${VTKHOME}" ] && [ -d "${vtkdir}" ] ; then
617 # echo $l $VTKHOME $vtkdir
618 sed -e "s%-L[^[:space:]]*VTK[^[:space:]]*/lib/vtk%-L${vtkdir}%g" $l > $l"_"
621 # 5. process HDF dependencies
622 hdfdir=`printenv HDF5HOME`/lib
623 if [ -n "${HDF5HOME}" ] && [ -d "${hdfdir}" ] ; then
624 # echo $l $HDF5HOME $hdfdir
625 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*hdf[^[:space:]/]*/lib% \1${hdfdir}%g" $l > $l"_"
628 # 6. process MED dependencies
629 meddir=`printenv MED2HOME`/lib
630 if [ -n "${MED2HOME}" ] && [ -d "${meddir}" ] ; then
631 # echo $l $MED2HOME $meddir
632 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*med[^[:space:]/]*/lib% \1${meddir}%g" $l > $l"_"
635 # 7. process qwt dependencies
636 qwtdir=`find_in_path libqwt.so ${LD_LIBRARY_PATH}`
637 if [ -n "${qwtdir}" ] && [ -d "${qwtdir}" ] ; then
639 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*qwt[^[:space:]/]*/lib% \1${qwtdir}%g" $l > $l"_"
642 # 8. process qt dependencies
643 qtdir=`printenv QTDIR`/lib
644 if [ -n "${QTDIR}" ] && [ -d "${qtdir}" ] ; then
645 # echo $l $QTDIR $qtdir
646 sed -e "s%[[:space:]]\(-L\)\?[^[:space:]]*qt[^[:space:]/]*/lib% \1${qtdir}%g" $l > $l"_"
649 # 9. process python dependencies
650 where_python=`which python` # e.g. /usr/bin/python
651 if [ -n "$where_python" ] ; then
652 where_python=`dirname $where_python` # --> /usr/bin
653 where_python=`dirname $where_python` # --> /usr
654 python_version=`python -c "import sys; print sys.version[:3]"`
655 # echo $l $where_python $python_version
656 sed -e "s%-L[^[:space:]]*python[0-9]\.[0-9]\([^[:space:]]*\)%-L${where_python}/lib/python${python_version}\1%g" $l > $l"_"
659 # 10. process sip dependencies
660 sipdir=`find_in_path sip.so ${LD_LIBRARY_PATH}`
661 if [ -n "${sipdir}" ] && [ -d "${sipdir}" ] ; then
663 sed -e "s%-L[^[:space:]]*sip[^[:space:]]*%-L${sipdir}%g" $l > $l"_"
666 # 11. process PyQt dependencies
667 pyqtdir=`find_in_path qt.so ${LD_LIBRARY_PATH}`
668 if [ -n "${pyqtdir}" ] && [ -d "${pyqtdir}" ] ; then
670 sed -e "s%-L[^[:space:]]*PyQt[^[:space:]]*%-L${pyqtdir}%g" $l > $l"_"
673 # 12. process tcl/tk dependencies
674 tcldir=`printenv TCLHOME`/lib
675 if [ -n "${tcldir}" ] && [ -d "${tcldir}" ] ; then
676 # echo $l $TCLHOME $tcldir
677 sed -e "s%-L[^[:space:]]*tcltk[^[:space:]]*/lib%-L${tcldir}%g" $l > $l"_"
680 # 13. process boost dependencies
681 boostdir=`printenv BOOSTDIR`/lib
682 if [ -n "${boostdir}" ] && [ -d "${boostdir}" ] ; then
683 # echo $l $BOOSTDIR $boostdir
684 sed -e "s%-L[^[:space:]]*boost[^[:space:]]*/lib%-L${boostdir}%g" $l > $l"_"
688 #sed -e "s%^libdir='\(.*\)'%libdir='${PRODUCT_DIR}/lib/salome'%g" $l > $l"_"
689 mod=`basename $ldir | awk -F_ '{print $1}'`
690 moddir=`printenv ${mod}_ROOT_DIR`
691 sed -e "s%^libdir='[^[:space:]]*${mod}[^[:space:]]*/\(lib.*\)'%libdir='${moddir}/\1'%g" $l > $l"_"