config_files/common.sh

   1 #!/bin/sh
   2 #
   3 # This script installs a subset of products necessary for SALOME application
   4 #
   5 # Usage: install <target-directory> [all]
   6 #        install <target-directory> <product> ... <product>
   7 #
   8 # Type 'install --help' to get more information
   9 #
  10 # Important note:
  11 #   <target-directory> must be an absolute path
  12 #
  13 # The script is the part of the SALOME PRO installation procedure.
  14 #
  15 # Copyright : 2003 CEA/DEN, EDF R&D
  16 ####################################################################################
  17
  18 export DELIM="------"
  19 export SHRC="salome.sh"
  20 export CSHRC="salome.csh"
  21 export DEBUG=1
  22
  23 #this function takes several parameters
  24 #first parameter contains descriptor of output file
  25 #next parameters is command for execution
  26 #in case of bad result of execution ask user about furher steps
  27 #(user can cancel installation procedure)
  28 check_job()
  29 {
  30   out=$1
  31   shift
  32   echo -e "`pwd` -> $* >> $out"
  33   if [ $DEBUG == 0 ] ; then
  34     $* | tee $out
  35   else
  36     if [ $out == "1" ] ; then
  37       $*
  38     else
  39       $* >> $out 2>&1
  40     fi
  41   fi
  42   if [ "$?" -ne "0" ] ; then
  43     if [ $out != "1" ] ; then
  44       cat $out
  45     fi
  46     # VSR : 10/11/05: disable answer mode ==>
  47     #echo -n " " >&2
  48     #echo -e "NOT DONE !!! => $*"
  49     #echo -n "Would you like to continue to install this product: (Y,N) [Y] : "
  50     #read rep;
  51     #rep=`echo $rep  | tr "[A-Z]" "[a-z]"`
  52     #if test -z $rep || [ $rep = "y" ] ; then
  53     #  return 1
  54     #fi
  55     # VSR : 10/11/05: disable answer mode <==
  56     exit 1
  57   fi
  58   return 0
  59 }
  60
  61 #invoke check_job function
  62 #all output will be put into terminal
  63 check_jb()
  64 {
  65   check_job 1 $*
  66   return
  67 }
  68
  69 # make directory
  70 makedir()
  71 {
  72   rm -rf "$1" > /dev/null
  73   mkdir -p "$1"
  74 }
  75
  76 #create environment for sh and csh
  77 make_env()
  78 {
  79 install_root=$1;  shift
  80 install_work=$1;
  81 for i in $SHRC $CSHRC ; do
  82     if [ -e ${install_work}/$i ]; then
  83         rm ${install_work}/$i
  84     fi
  85     touch ${install_work}/$i
  86 done
  87
  88 if [ $# -eq 3 ] ; then
  89     product_name=$3;
  90     product_env=${install_work}/env_${product_name}.sh
  91     (test -e ${product_env} && rm ${product_env} )
  92 fi
  93 ### !!! writing salome.sh file !!!  -> define INSTALL_ROOT
  94 cat >> ${install_work}/$SHRC <<EOF
  95 #${DELIM} Setting products installation directory ${DELIM}
  96 export INSTALL_ROOT=${install_root}
  97
  98 #${DELIM} Environment switch: 0 for SALOME building, 1 for SALOME launching ${DELIM}
  99 export ENV_FOR_LAUNCH=1
 100
 101 EOF
 102 ### !!! The next is for RedHat 9 only !!!
 103 if [ -f /etc/redhat-release ] ; then
 104   grep -e "Red Hat Linux release 9" /etc/redhat-release > /dev/null
 105   if [ $? -eq 0 ] ; then
 106     cat >> ${install_work}/$SHRC <<EOF
 107 #${DELIM} Force RH9 to use old implementation of threads ${DELIM}
 108 export LD_ASSUME_KERNEL=2.4.18
 109
 110 EOF
 111   fi
 112 fi
 113 ### !!! writing salome.csh file !!! -> set inital variables
 114 pre_vars="PATH LD_LIBRARY_PATH LD_RUN_PATH PYTHONPATH TCLLIBPATH"
 115 for i in $pre_vars ; do
 116 cat >> ${install_work}/$CSHRC <<EOF
 117 #${DELIM} setting initial ${i} ${DELIM}
 118 if (! (\$?${i}) ) then
 119   setenv $i
 120 endif
 121
 122 EOF
 123 done
 124
 125 ### !!! writing salome.(c)sh files !!! -> dump products environment files, changing 'export' by 'setenv(a|p)' where necessary
 126 ### Note, that for performance reasons temporary environment files used during installation procedure itself
 127 ### are created without using setenv(a|p) aliases.
 128
 129 # 1. first dump all environment files into the $SHRC file
 130 product_sequence="$2"
 131 for i in $product_sequence ; do
 132     cat ${install_work}/env_${i}.sh >> ${install_work}/$SHRC 2>/dev/null
 133 done
 134
 135 # 2. writing global functions to _salome.sh file
 136 cat >> ${install_work}/_$SHRC <<EOF
 137 ##########################################################################
 138 # Functions exporta and exportp are used to append/prepend correspondingly
 139 # one directory or a set of directories separated by semicolon symbol (':')
 140 # to the environment variables like PATH, LD_LIBRARY_PATH, PYTHONPATH,
 141 # LD_RUN_PATH etc.
 142 # The main purpose is to replace default setenv command behavior:
 143 # exporta, exportp also remove duplicated entries, shortening in that way
 144 # the environment variables.
 145 # If some directory being added is already included into the variable
 146 # nothing is done for it.
 147 # Note, that these functions work some slower that setenv command itself.
 148 #
 149 #### cleandup ###
 150 # appends/prepends set of directories (second parameter)
 151 # to the another set of directories (first parameter) and
 152 # removes duplicated entries;
 153 # the third parameter defines the mode: 0 - append, 1 - prepend
 154 cleandup() {
 155 out_var=\`echo \$1 \$2 | awk -v dir=\$3 '{                   \\
 156     na = split(\$2,a,":");                                \\
 157     if ( \$1 == "<empty>") nb = split("",b,":");          \\
 158     else nb = split(\$1,b,":");                           \\
 159     s = "" ;                                             \\
 160     for(i=1;i<=nb;i++) {                                 \\
 161         if(!(b[i] in ccc)) {                             \\
 162             if(length(s)!=0)                             \\
 163                 s = sprintf("%s:",s);                    \\
 164             s = sprintf("%s%s",s,b[i]);                  \\
 165             ccc[b[i]];                                   \\
 166         };                                               \\
 167     };                                                   \\
 168     s1 = "";                                             \\
 169     for(i=1;i<=na;i++) {                                 \\
 170         if(!(a[i] in ccc)) {                             \\
 171             if(length(s1)!=0)                            \\
 172                 s1 = sprintf("%s:",s1);                  \\
 173             s1 = sprintf("%s%s",s1,a[i]);                \\
 174             ccc[a[i]];                                   \\
 175         };                                               \\
 176     };                                                   \\
 177     if(dir)                                              \\
 178         s = length(s) == 0 ? s1 : sprintf("%s:%s",s1,s); \\
 179     else                                                 \\
 180         s = length(s1) == 0 ? s : sprintf("%s:%s",s,s1); \\
 181     printf("%s\n",s);                                    \\
 182     }'\`
 183 echo \$out_var
 184 }
 185 ### exporta ###
 186 # appends directory or set of directories, separated by ':' (second parameter)
 187 # to the variable (first parameter)
 188 exporta () {
 189 xenv=\`printenv \$1\`
 190 if [ -z "\$xenv" ]; then xenv="<empty>"; fi
 191 out_var=\`cleandup \$xenv \$2 0\`
 192 export \$1=\$out_var
 193 }
 194 ### exportp ###
 195 # prepends directory or set of directories, separated by ':' (second parameter)
 196 # to the variable (first parameter)
 197 exportp () {
 198 xenv=\`printenv \$1\`
 199 if [ -z "\$xenv" ]; then xenv="<empty>"; fi
 200 out_var=\`cleandup \$xenv \$2 1\`
 201 export \$1=\$out_var
 202 }
 203 ###########################################################################
 204
 205 EOF
 206
 207 # 3. writing global functions to _salome.csh file
 208 cat >> ${install_work}/_$CSHRC <<EOF
 209 ###########################################################################
 210 # Aliases setenva and setenvp are used to append/prepend correspondingly
 211 # one directory or a set of directories separated by semicolon symbol (':')
 212 # to the environment variables like PATH, LD_LIBRARY_PATH, PYTHONPATH,
 213 # LD_RUN_PATH etc.
 214 # The main purpose is to replace default setenv command behavior:
 215 # setenva, setenvp also remove duplicated entries, shortening in that way
 216 # the environment variables.
 217 # If some directory being added is already included into the variable
 218 # nothing is done for it.
 219 # Note, that these aliases work some slower that setenv command itself.
 220 #
 221 #### cleandup ###
 222 # appends/prepends set of directories (second parameter)
 223 # to the another set of directories (first parameter) and
 224 # removes duplicated entries;
 225 # the third parameter defines the mode: 0 - append, 1 - prepend
 226 alias cleandup "echo \!:1 \!:2 | awk -v dir=\!:3         \\\\
 227 '"'{ na = split(\$2,a,":");                               \\\\
 228      nb = split(\$1,b,":");                               \\\\
 229      s = "" ;                                            \\\\
 230      for(i=1;i<=nb;i++) {                                \\\\
 231         if(!(b[i] in ccc)) {                             \\\\
 232             if(length(s)!=0)                             \\\\
 233                 s = sprintf("%s:",s);                    \\\\
 234             s = sprintf("%s%s",s,b[i]);                  \\\\
 235             ccc[b[i]];                                   \\\\
 236         };                                               \\\\
 237     };                                                   \\\\
 238     s1 = "";                                             \\\\
 239     for(i=1;i<=na;i++) {                                 \\\\
 240         if(!(a[i] in ccc)) {                             \\\\
 241             if(length(s1)!=0)                            \\\\
 242                 s1 = sprintf("%s:",s1);                  \\\\
 243             s1 = sprintf("%s%s",s1,a[i]);                \\\\
 244             ccc[a[i]];                                   \\\\
 245         };                                               \\\\
 246     };                                                   \\\\
 247     if(dir)                                              \\\\
 248         s = length(s) == 0 ? s1 : sprintf("%s:%s",s1,s); \\\\
 249     else                                                 \\\\
 250         s = length(s1) == 0 ? s : sprintf("%s:%s",s,s1); \\\\
 251     printf("%s\n",s);                                    \\\\
 252     }'"'"
 253 ### setenva ###
 254 # appends directory or set of directories, separated by ':' (second parameter)
 255 # to the variable (first parameter)
 256 alias setenva 'set a=\!:1 ; set b=\!:2 ;  \\
 257                set c=\`printenv \$a\` ;      \\
 258                set b=\`cleandup \$c \$b 0\` ; \\
 259                setenv \$a \$b ;             \\
 260                unset a, b, c'
 261
 262 ### setenvp ###
 263 # prepends directory or set of directories, separated by ':' (second parameter)
 264 # to the variable (first parameter)
 265 alias setenvp 'set a=\!:1 ; set b=\!:2 ;  \\
 266                set c=\`printenv \$a\` ;      \\
 267                set b=\`cleandup \$c \$b 1\` ; \\
 268                setenv \$a \$b ;             \\
 269                unset a, b, c'
 270 ###########################################################################
 271
 272 EOF
 273 cat ${install_work}/$CSHRC >> ${install_work}/_$CSHRC
 274
 275 # 4. put the contents of salome.sh to _salome.sh replacing export by export(a|p) aliases where necessary
 276 sed -e 's%export\([[:blank:]]*\)PATH=\$[{]\?PATH[}]\?:\(.*\)%exporta\1PATH \2%g' -e 's%export\([[:blank:]]*\)PATH=\(.*\):\$[{]\?PATH[}]\?%exportp\1PATH \2%g' ${install_work}/$SHRC > ${INSTALL_WORK}/_tmp1 2>/dev/null
 277 sed -e 's%export\([[:blank:]]*\)LD_LIBRARY_PATH=\$[{]\?LD_LIBRARY_PATH[}]\?:\(.*\)%exporta\1LD_LIBRARY_PATH \2%g' -e 's%export\([[:blank:]]*\)LD_LIBRARY_PATH=\(.*\):\$[{]\?LD_LIBRARY_PATH[}]\?%exportp\1LD_LIBRARY_PATH \2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
 278 sed -e 's%export\([[:blank:]]*\)PYTHONPATH=\$[{]\?PYTHONPATH[}]\?:\(.*\)%exporta\1PYTHONPATH \2%g' -e 's%export\([[:blank:]]*\)PYTHONPATH=\(.*\):\$[{]\?PYTHONPATH[}]\?%exportp\1PYTHONPATH \2%g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
 279 sed -e 's%export\([[:blank:]]*\)LD_RUN_PATH=\$[{]\?LD_RUN_PATH[}]\?:\(.*\)%exporta\1LD_RUN_PATH \2%g' -e 's%export\([[:blank:]]*\)LD_RUN_PATH=\(.*\):\$[{]\?LD_RUN_PATH[}]\?%exportp\1LD_RUN_PATH \2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2
 280 cat ${INSTALL_WORK}/_tmp2 >> ${install_work}/_$SHRC
 281
 282 # 5. Create a salome.csh file from salome.sh by replacing export by setenv, etc.
 283 sed -e 's%export \([[:alnum:]_[:blank:]]*\)\=%setenv \1 %g' ${install_work}/$SHRC > ${INSTALL_WORK}/_tmp1 2>/dev/null
 284 cat ${INSTALL_WORK}/_tmp1 >> ${install_work}/$CSHRC
 285
 286 # 6. Create a _salome.csh file from _salome.sh by replacing export by setenv, exporta by setenva, etc.
 287 sed -e 's%export \([[:alnum:]_[:blank:]]*\)\=%setenv \1 %g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
 288 sed -e 's%exporta \([[:alnum:]_[:blank:]]*\)%setenva \1%g'  ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
 289 sed -e 's%exportp \([[:alnum:]_[:blank:]]*\)%setenvp \1%g'  ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
 290 sed -e 's%if \[ -n "\${ENV_FOR_LAUNCH}" \] ; then%if ( ${?ENV_FOR_LAUNCH} ) then%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
 291 sed -e 's%if \[ "\${ENV_FOR_LAUNCH}" == "1" \] ; then%if ( "\${ENV_FOR_LAUNCH}" == "1" ) then%g' ${INSTALL_WORK}/_tmp2 > ${INSTALL_WORK}/_tmp1 2>/dev/null
 292 sed -e 's%^\([[:blank:]]*\)fi\([[:blank:]]*\)$%\1endif\2%g' ${INSTALL_WORK}/_tmp1 > ${INSTALL_WORK}/_tmp2 2>/dev/null
 293 cat ${INSTALL_WORK}/_tmp2 >> ${install_work}/_$CSHRC 2>/dev/null
 294
 295 rm -f ${INSTALL_WORK}/_tmp1 ${INSTALL_WORK}/_tmp2
 296
 297 if [ $# -eq 4 ] ; then
 298     product_dir=$4
 299     if [ -e ${product_dir} ] ; then
 300         cp -f ${install_work}/_$SHRC  ${product_dir}/$SHRC
 301         cp -f ${install_work}/_$CSHRC ${product_dir}/$CSHRC
 302     fi
 303 fi
 304 sed -e 's%setenv ENV_FOR_LAUNCH 1%setenv ENV_FOR_LAUNCH 0%' ${install_work}/_$CSHRC > ${install_root}/env_build.csh
 305 sed -e 's%export ENV_FOR_LAUNCH=1%export ENV_FOR_LAUNCH=0%' ${install_work}/_$SHRC  > ${install_root}/env_build.sh
 306 cp -f ${install_work}/_$CSHRC ${install_root}/env_products.csh
 307 cp -f ${install_work}/_$SHRC  ${install_root}/env_products.sh
 308 rm -f ${install_work}/_$SHRC ${install_work}/_$CSHRC
 309 ### !!! copying build.csh script
 310 if [ -e ./build.csh ]; then
 311     cp -f ./build.csh ${install_root}
 312 fi
 313 }
 314
 315 #try use already existing product
 316 try_existing()
 317 {
 318 product_dir=$1;  install_root=$2;  install_work=$3;  product_sequence="$4";  product_type=$5
 319 env_file=${product_dir}/env_${product_type}.sh
 320 if [ -f ${env_file} ] ; then
 321     cp -f ${env_file} ${install_work}
 322     make_env ${install_root} ${install_work} "${product_sequence}"
 323     source ${install_work}/$SHRC
 324     check_version
 325     if [ $? -eq 0 ] ; then
 326         if [ -d ${product_dir} ] && [ -w ${product_dir} ] ; then
 327             #makedir ${product_dir}
 328             print_env
 329             return 0
 330         fi
 331     fi
 332 fi
 333 return 1;
 334 }
 335
 336 #check existance of lib passed as first parameter
 337 #return 0 if lib exists
 338 #if you pass second parameter search will be done in it
 339 #otherwise search will be done in $LD_LIBRARY_PATH
 340 #you should use : as dilimeter if you are going to pass second parameter
 341 check_lib_version(){
 342 if [ -n "$2" ]; then
 343    whereIs=$2
 344 else
 345    whereIs=$LD_LIBRARY_PATH
 346 fi
 347 for L in `echo ${whereIs} | sed -e"s%:% %g"` ;  do
 348     ret=`find $L -name $1 2>/dev/null`
 349     if [ -n "$ret" ] ; then
 350         #echo "The $1 exists on yours system in a $L folder"
 351         return 0
 352     fi
 353 done
 354 return 1
 355 }
 356
 357 find_in_path(){
 358 file=$1;  shift;
 359 path=$*
 360 for i in `echo ${path} | sed -e"s%:% %g"` ; do
 361     ret=`find $i -name $file 2>/dev/null`
 362     if [ -n "$ret" ] ; then
 363         ret=`echo $ret | sed -e"s%/\$file$%%g"`
 364         echo $ret
 365         return 0
 366     fi
 367 done
 368 return 1
 369 }
 370
 371 sort_path(){
 372 arg1=$1;  val1=$2;  arg2=$3;  val2=$4
 373 tmp="^$val1$|^$val1:|:$val1$|:$val1:"
 374 #echo $val2 | grep -E "$tmp" >/dev/null 2>&1
 375 #if [ $? -eq 0 ] ; then
 376 #    echo "$arg2"
 377 #    return
 378 #fi
 379 to_tail=1
 380 exclude_list="usr lib bin sbin etc"
 381 for i in ${exclude_list} ; do
 382     tmp="^/$i/|^/$i\$"
 383     echo ${val1} | grep -E "$tmp" >/dev/null 2>&1
 384     if [ $? == 0 ] ; then to_tail=0; break; fi
 385 done
 386 if [ $to_tail -eq 0 ] ; then
 387     echo $arg2:$arg1
 388 else
 389     echo $arg1:$arg2
 390 fi
 391 return $to_tail
 392 }
 393
 394 where_tcl(){
 395 if test -z "${TCLHOME}"; then
 396     TCLHOME=/usr
 397 fi
 398 tclcfg=`find ${TCLHOME}/lib -name "tclConfig.sh" 2> /dev/null`
 399 file=""
 400 maxver=0
 401 for f in $tclcfg; do
 402     ver=`cat $f | grep -e "TCL_VERSION=.*" | sed -e "s%TCL_VERSION=[\'|\"]\(.*\)[\'|\"]%\1%g" | awk -F. '{x=0;for(i=1;i<=3;i++){x=x*100;if(i<=NF)x+=$i;}print x;}'`
 403     if [ $maxver -lt $ver ]; then
 404         maxver=$ver
 405         file=$f
 406     fi
 407 done
 408 if test -n "$file"; then
 409     echo `dirname $file`
 410     return 0
 411 else
 412     echo ""
 413     return 1
 414 fi
 415 }
 416
 417 where_tk(){
 418 if test -z "${TCLHOME}"; then
 419     TCLHOME=/usr
 420 fi
 421 tclcfg=`find ${TCLHOME}/lib -name "tkConfig.sh" 2> /dev/null`
 422 file=""
 423 maxver=0
 424 for f in $tclcfg; do
 425     ver=`cat $f | grep -e "TK_VERSION=.*" | sed -e "s%TK_VERSION=[\'|\"]\(.*\)[\'|\"]%\1%g" | awk -F. '{x=0;for(i=1;i<=3;i++){x=x*100;if(i<=NF)x+=$i;}print x;}'`
 426     if [ $maxver -lt $ver ]; then
 427         maxver=$ver
 428         file=$f
 429     fi
 430 done
 431 if test -n "$file"; then
 432     echo `dirname $file`
 433     return 0
 434 else
 435     echo ""
 436     return 1
 437 fi
 438 }
 439
 440 modif_la_files(){
 441 ldir=$1
 442 if [ -z "$ldir" ] || [ ! -d "$ldir" ]; then return 1; fi
 443
 444 srcdir=`pwd`
 445
 446 SALOME_MODULES="`env | awk -F_ '/[[:alnum:]]*_ROOT_DIR/ { print $1 }'`"
 447
 448 cd $ldir
 449 la_files=`find . -name "*.la" -maxdepth 1`
 450
 451 for l in X ${la_files}; do
 452 if [ "$l" != "X" ] ; then
 453     l=`basename $l`
 454     # 1. process salome modules dependencies
 455     for mod in $SALOME_MODULES; do
 456         moddir=`printenv ${mod}_ROOT_DIR`
 457         if [ -n "${moddir}" ] ; then
 458             #echo $l $mod $moddir
 459             sed -e "s%-L[^[:space:]]*${mod}[^[:space:]]*/lib/salome%-L${moddir}/lib/salome%g" $l > _$l
 460             mv -f _$l $l
 461         fi
 462     done
 463     # 2. process CAS.CADE dependencies
 464     casdir=`printenv CASROOT`/lib
 465     if [ ! -d ${casdir} ] ; then casdir=`printenv CASROOT`/Linux/lib ; fi
 466     if [ ! -d ${casdir} ] ; then casdir=`printenv CASROOT`/lin/lib ; fi
 467     if [ -n "${CASROOT}" ] && [ -d "${casdir}" ] ; then
 468         # echo $l $CASROOT $casdir
 469         sed -e "s%-L[^[:space:]]*\(OCT\|CAS\)[^[:space:]]*%-L${casdir}%g" $l > _$l
 470         mv -f _$l $l
 471     fi
 472     # 3. process omniORB dependencies
 473     omnidir=`printenv OMNIORBDIR`/lib/i586_linux_2.0_glibc2.1
 474     if [ ! -d ${omnidir} ] ; then omnidir=`printenv OMNIORBDIR`/lib ; fi
 475     if [ -n "${OMNIORBDIR}" ] && [ -d "${omnidir}" ] ; then
 476         # echo $l $OMNIORBDIR $omnidir
 477         sed -e "s%-L[^[:space:]]*omni[^[:space:]]*%-L${omnidir}%g" $l > _$l
 478         mv -f _$l $l
 479     fi
 480     # 4. process VTK dependencies
 481     vtkdir=`printenv VTKHOME`/lib/vtk
 482     if [ -n "${VTKHOME}" ] && [ -d "${vtkdir}" ] ; then
 483         # echo $l $VTKHOME $vtkdir
 484         sed -e "s%-L[^[:space:]]*VTK[^[:space:]]*/lib/vtk%-L${vtkdir}%g" $l > _$l
 485         mv -f _$l $l
 486     fi
 487     # 5. process HDF dependencies
 488     hdfdir=`printenv HDF5HOME`/lib
 489     if [ -n "${HDF5HOME}" ] && [ -d "${hdfdir}" ] ; then
 490         # echo $l $HDF5HOME $hdfdir
 491         sed -e "s%-L[^[:space:]]*hdf[^[:space:]]*/lib%-L${hdfdir}%g" $l > _$l
 492         mv -f _$l $l
 493     fi
 494     # 6. process MED dependencies
 495     meddir=`printenv MED2HOME`/lib
 496     if [ -n "${MED2HOME}" ] && [ -d "${meddir}" ] ; then
 497         # echo $l $MED2HOME $meddir
 498         sed -e "s%-L[^[:space:]]*med[^[:space:]]*/lib%-L${meddir}%g" $l > _$l
 499         mv -f _$l $l
 500     fi
 501     # 7. process qwt dependencies
 502     qwtdir=`printenv QWTHOME`/lib
 503     if [ -n "${QWTHOME}" ] && [ -d "${qwtdir}" ] ; then
 504         # echo $l $QWTHOME $qwtdir
 505         sed -e "s%-L[^[:space:]]*qwt[^[:space:]]*/lib%-L${qwtdir}%g" $l > _$l
 506         mv -f _$l $l
 507     fi
 508     # 8. process qt dependencies
 509     qtdir=`printenv QTDIR`/lib
 510     if [ -n "${QTDIR}" ] && [ -d "${qtdir}" ] ; then
 511         # echo $l $QTDIR $qtdir
 512         sed -e "s%-L[^[:space:]]*qt[^[:space:]]*/lib%-L${qtdir}%g" $l > _$l
 513         mv -f _$l $l
 514     fi
 515     # 9. process python dependencies
 516     where_python=`which python`                 # e.g. /usr/bin/python
 517     if [ -n "$where_python" ] ; then
 518         where_python=`dirname $where_python`    # --> /usr/bin
 519         where_python=`dirname $where_python`    # --> /usr
 520         python_version=`python -c "import sys; print sys.version[:3]"`
 521         # echo $l $where_python $python_version
 522         sed -e "s%-L[^[:space:]]*python[0-9]\.[0-9]\([^[:space:]]*\)%-L${where_python}/lib/python${python_version}\1%g" $l > _$l
 523         mv -f _$l $l
 524     fi
 525     # 10. process sip dependencies
 526     sipdir=`find_in_path sip.so ${LD_LIBRARY_PATH}`
 527     if [ -n "${sipdir}" ] && [ -d "${sipdir}" ] ; then
 528         # echo $l $sipdir
 529         sed -e "s%-L[^[:space:]]*sip[^[:space:]]*%-L${sipdir}%g" $l > _$l
 530         mv -f _$l $l
 531     fi
 532     # 11. process PyQt dependencies
 533     pyqtdir=`find_in_path qt.so ${LD_LIBRARY_PATH}`
 534     if [ -n "${pyqtdir}" ] && [ -d "${pyqtdir}" ] ; then
 535         # echo $l $pyqtdir
 536         sed -e "s%-L[^[:space:]]*PyQt[^[:space:]]*%-L${pyqtdir}%g" $l > _$l
 537         mv -f _$l $l
 538     fi
 539     # 12. process tcl/tk dependencies
 540     tcldir=`printenv TCLHOME`/lib
 541     if [ -n "${tcldir}" ] && [ -d "${tcldir}" ] ; then
 542         # echo $l $TCLHOME $tcldir
 543         sed -e "s%-L[^[:space:]]*tcltk[^[:space:]]*/lib%-L${tcldir}%g" $l > _$l
 544         mv -f _$l $l
 545     fi
 546     # 13. modify libdir
 547     sed -e "s%^libdir='\(.*\)'%libdir='${PRODUCT_DIR}/lib/salome'%g" $l > _$l
 548     mv -f _$l $l
 549 fi
 550 done
 551
 552 cd $srcdir
 553 return 0
 554 }