3 ####################################################################################
5 # Created : Thu Jan 27 09:50:55 2005
6 # Author : Vadim SANDLER, Open CASCADE SAS (vadim.sandler@opencascade.com)
8 # Module : Installation Wizard
9 # Copyright : 2002-2008 CEA
11 # This script is the part of the SALOME installation procedure.
13 # This script can be used to build and install SALOME modules from sources.
14 # Try build.csh -h for more details about usage.
16 ####################################################################################
18 set is_build_configure=0
24 set modules=(KERNEL GUI GEOM MED SMESH VISU YACS NETGENPLUGIN GHS3DPLUGIN BLSURFPLUGIN HexoticPLUGIN GHS3DPRLPLUGIN COMPONENT PYCALCULATOR CALCULATOR HELLO PYHELLO LIGHT PYLIGHT SIERPINSKY RANDOMIZER)
30 set def_install_dir="/INSTALL"
33 #########################################################
35 #########################################################
37 if ( "$1" == "-b" ) then
38 set is_build_configure=1
40 else if ( "$1" == "-c" ) then
42 else if ( "$1" == "-w" ) then
44 else if ( "$1" == "-d" ) then
46 else if ( "$1" == "-o" ) then
47 set optim="--enable-production=yes --disable-debug"
48 else if ( "$1" == "-v" ) then
51 else if ( "$1" == "-p" ) then
55 else if ( "$1" == "-h" ) then
57 else if ( "$1" == "-t" ) then
60 set ckt=`echo ${modules} | grep -E "\<$1\>"`
61 if ( "$ckt" != "" ) then
62 set params="$params $1"
64 set b_params="$b_params $1"
65 echo "\!\!\! Warning \!\!\! Unknown module: $1."
71 #########################################################
72 # if -h option is given - print help info and exit
73 #########################################################
74 if ( $is_help == 1 ) then
78 echo " Builds given SALOME modules by performing make and make install commands"
81 echo " build.csh [ <option> ] ... [ <module> [ <module> ... ] ]"
83 echo "<module> Modules to build, separated by space(s)."
84 echo " If no modules are given - all SALOME modules are assumed."
85 echo " Note, that modules given in command lines are automatically sorted in such order"
86 echo " to support correct modules dependencies."
89 echo "-b Perform build_configure command for all given modules."
90 echo " This option forces configure (-c) key to be set. Default is off."
92 echo "-c Perform configure command for all given modules. Default is off."
94 echo "-w Add --without-gui key to build_configure and configure commands"
95 echo " to build SALOME module sources without GUI."
96 echo " By default sources are built with GUI."
98 echo "-d Delete build directories before calling configure, to force full rebuild"
99 echo " and reinstall of the module."
100 echo " Use this option carefully."
102 echo "-o Build sources in optimized mode. Default is off that means debug mode."
103 echo " Use this option together with -c or -b."
104 echo " This option can require -d option to be set (to ensure that previously"
105 echo " created build directories are removed to enforce rebuild in optimized mode)."
107 echo "-t Performs make dev_docs step to build TUI documentation for those modules"
108 echo " which support this. Default is off."
110 echo "-p <prefix> Define the directory where to install modules after compilation."
111 echo " By default the directory where compilation is performed is used."
113 echo "-v <level> Verbose level (0-2, default 2): print information on build status:"
114 echo " 0: only 'make' errors"
115 echo " 1: 0 + compiler and other errors (including build_configure, configure)"
116 echo " 2: 1 + compiler and other warnings "
118 echo "-h Prints this help information."
120 echo "Note: If no keys are given script just performs make step."
123 echo " ./build.csh -o -p /home/user/salome -b KERNEL MED GEOM"
125 echo " This will make KERNEL, GEOM and MED modules: build_configure, configure, make"
126 echo " and install procedures will be performed for all specified modules."
127 echo " The modules will be built in the optimized mode"
132 #########################################################
133 # sort modules in proper order according to the dependancies
134 #########################################################
135 if ( "${params}" != "" ) then
137 foreach module (${modules})
138 set ckt=`echo ${params} | grep -E "\<${module}\>"`
139 if ( "$ckt" != "" ) then
140 set xparams="$xparams $module"
143 set modules=($xparams $b_params)
144 else if ( "${b_params}" != "" ) then
145 set modules=($b_params)
148 echo ">>> The following modules will be built:"
151 #########################################################
153 #########################################################
154 set env_script=`dirname $0`/env_build.csh
155 if ( ! -e $env_script ) then
156 set env_script=`dirname $0`/env_products.csh
158 if ( ! -e $env_script ) then
159 set env_script=`dirname $0`/env.sh
161 if ( -e $env_script ) then
162 echo ">>> Setting environment"
165 echo "\!\!\! Warning \!\!\! Environment is not set."
166 echo "No environment file (env_build.sh, env_products.sh, env.sh) is found."
167 echo "Proceed with the current environment."
171 set LOG_DIR=${BUILD_DIR}/LOGS
173 #########################################################
174 # define installation prefix
175 #########################################################
176 if ( "$prefix" == "" ) then
177 echo "\!\!\! Warning \!\!\! Installation directory is not set."
178 echo "All the modules will be installed to the ${BUILD_DIR}${def_install_dir}"
180 set is_absolute=`echo $prefix | grep -e "^/"`
181 if ( "$is_absolute" == "" ) then
182 set prefix=${BUILD_DIR}/$prefix
183 echo "\!\!\! Warning \!\!\! Relative prefix is used."
184 echo "All the modules will be installed to the $prefix"
188 #########################################################
189 # create log directory
190 #########################################################
191 if ( ! -e ${LOG_DIR} ) then
195 echo "==========================================================================="
196 echo "Starting SALOME build at `date`"
197 echo "==========================================================================="
199 #########################################################
200 # loop for all given modules
201 #########################################################
202 foreach module (${modules})
203 echo ">>> Processing ${module} module"
205 set module_src=`printenv ${module}_SRC_DIR`
206 set module_build=${BUILD_DIR}/${module}_BUILD
208 if ( ${module_src} != "" ) then
210 #########################################################
211 # check if sources directory exists
212 #########################################################
213 if ( ! -e ${module_src} ) then
214 echo "\!\!\! Error \!\!\! Can't find sources directory: ${module_src} does not exist."
217 #########################################################
218 # check if configure script exists
219 #########################################################
221 if ( -e ${module_src}/configure ) then
224 #########################################################
225 # perform build_configure if -b flag is given or if
226 # configure script does not exist (first compilation?)
227 #########################################################
228 if ( $is_build_configure == 1 || $cfg_exist == 0 ) then
229 echo "... Performing build_configure"
230 #########################################################
231 # check if build_configure script exists
232 #########################################################
233 if ( ! -e ${module_src}/build_configure ) then
234 echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
236 #########################################################
237 # call build_configure
238 #########################################################
239 set mybuildconf_keys="${BUILDCONF_OPTS}"
240 if ( $inst_with_gui == 0 ) then
241 set mybuildconf_keys="${mybuildconf_keys} --without-gui"
244 ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
245 #########################################################
246 # echo possible errors
247 #########################################################
248 if ( $verbose_level > 0 ) then
249 cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)" >/dev/stderr
253 #########################################################
254 # deleting build directory if -d flag is given
255 #########################################################
256 if ( -e ${module_build} && $is_delete == 1 ) then
257 echo "... Removing ${module_build}"
258 chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
259 if ( "$?" != "0" ) then
260 echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
263 #########################################################
264 # creating build directory if it does not exist
265 #########################################################
266 if ( ! -e ${module_build} ) then
267 mkdir -p ${module_build} >& /dev/null
268 if ( "$?" != "0" ) then
269 echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
274 #########################################################
275 # check if top Makefile exists in build directory, i.e.
276 # is it necessary to run configure script
277 #########################################################
279 if ( -e ${module_build}/Makefile ) then
282 #########################################################
283 # check if configure options are changed from the
285 #########################################################
287 ## if ( -f ${module_build}/config.log ) then
288 ## set old_prefix=`grep -e '^prefix=' ${module_build}/config.log | sed -e "s%^prefix='\(.*\)'%\1%"`
289 ## if ( "$old_prefix" != "$prefix" ) then
290 ## set opts_changed=1
293 #########################################################
294 # define installation directory (by using module's version
295 # number); default is a build directory
296 #########################################################
298 if ( -e ${module_src}/configure.ac ) then
299 set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
300 else if ( -e ${module_src}/configure.in.base ) then
301 set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
302 if ( "$vx" == "" ) then
303 set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
306 if ( "$vx" != "" ) then
309 if ( "$prefix" == "" ) then
310 #set module_root_dir=`printenv ${module}_ROOT_DIR`
311 #if ( "$module_root_dir" != "" ) then
312 # set px=$module_root_dir
314 set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
317 set px=${prefix}/${module}${vx}
319 #########################################################
320 # perform configure if -c flag is given or if
321 # Makefile does not exist (first compilation?)
322 #########################################################
323 if ( $is_configure == 1 || $mkfile_exist == 0 || $opts_changed == 1 ) then
324 echo "... Performing configure"
325 #########################################################
326 # check if configure script exists
327 #########################################################
328 if ( ! -e ${module_src}/configure ) then
329 echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
331 set myconf_keys="${CONF_OPTS}"
332 if ( $inst_with_gui == 0 ) then
333 set myconf_keys="${myconf_keys} --without-gui"
335 if ( "${module}" == "MED" && ($?METISDIR) && ($?SCOTCHDIR) ) then
336 set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METISDIR} --with-scotch=${SCOTCHDIR}"
338 if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
339 set myconf_keys="${myconf_keys} --with-netgen=${NETGENHOME}"
341 ${module_src}/configure --prefix=$px ${optim} ${myconf_keys} >& ${LOG_DIR}/configure_${module}.log
342 #########################################################
343 # echo possible errors
344 #########################################################
345 if ( $verbose_level > 0 ) then
346 cat ${LOG_DIR}/configure_${module}.log | grep ": error:" >/dev/stderr
348 if ( $verbose_level > 1 ) then
349 cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:" >/dev/stderr
353 #########################################################
355 #########################################################
356 echo "... Performing make"
357 #########################################################
358 # first clear dependencies
359 #########################################################
360 find . -name ".dep*" -type f -exec rm -f {} \; >& /dev/null
361 make >& ${LOG_DIR}/make_${module}.log
363 #########################################################
364 # if make step is successful set the ${module}_ROOT_DIR
365 # environment variable
366 #########################################################
367 #if ( $sts == 0 ) then
368 # setenv ${module}_ROOT_DIR ${module_build}
370 #########################################################
372 #########################################################
373 cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error' >/dev/stderr
374 #########################################################
375 # print compiler errors and warnings
376 # Note: here awk is used to concatenate together several lines of single
377 # error or warning message produced by stupid gnu compiler
378 # Actually, instead of that we could use 'fmessage length=n' option of g++...
379 #########################################################
380 if ( $verbose_level > 0 ) then
381 ###cat ${LOG_DIR}/make_${module}.log | grep ": error"
382 cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@ >/dev/stderr
384 if ( $verbose_level > 1 ) then
385 cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@ >/dev/stderr
387 #########################################################
388 # perform make dev_docs step if -t flag is given
389 #########################################################
390 if ( $is_tui == 1 && $sts == 0 && -d ${module_build}/doc ) then
391 cd ${module_build}/doc
392 set dd=`cat Makefile | grep -E "dev_docs[[:space:]]*:"`
393 if ( "$dd" != "" ) then
394 echo "... Performing make dev_docs"
395 make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
396 cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]' >/dev/stderr
400 #########################################################
401 # perform make if -i or -p flags are given
402 #########################################################
403 if ( $is_install == 1 && $sts == 0 || "${module}" == "KERNEL" ) then
404 #########################################################
405 # deleting build directory if -d flag is given
406 #########################################################
407 if ( -e $px && $is_delete == 1 ) then
408 echo "... Removing $px"
409 rm -rf $px >& /dev/null
410 if ( "$?" != "0" ) then
411 echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
414 echo "... Performing make install"
415 make install >& ${LOG_DIR}/make_install_${module}.log
417 #########################################################
418 # if make install step is successful set the
419 # ${module}_ROOT_DIR environment variable
420 #########################################################
421 if ( $sts == 0 ) then
422 setenv ${module}_ROOT_DIR $px
425 echo ">>> Finished ${module} module"
427 echo "\!\!\! Error \!\!\! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
430 #########################################################
432 #########################################################
435 echo "==========================================================================="
436 echo "SALOME build finished at `date`"
437 echo "==========================================================================="