Traducteur/traduitV7V8.py

   1 #!/usr/bin/env python
   2 # -*- coding: utf-8 -*-
   3 """
   4 """
   5 usage="""usage: %prog [options]
   6 Typical use is:
   7   python traduitV7V8.py --infile=xxxx --outfile=yyyy
   8 """
   9
  10 import sys
  11 import log
  12 import optparse
  13
  14 from load   import getJDC
  15 from mocles import parseKeywords
  16 from removemocle  import *
  17 from renamemocle  import *
  18 from renamemocle  import *
  19 from inseremocle  import *
  20 from changeValeur import *
  21 from movemocle    import *
  22 from dictErreurs  import GenereErreurPourCommande,GenereErreurMotCleInFact
  23
  24 import calcG
  25
  26 atraiter=( "IMPR_GENE","CALC_FONCTION", "DEFI_MATERIAU","STAT_NON_LINE",
  27           "CALC_G_LOCAL_T","CALC_G_THETA_T","CALC_G","AFFE_CHAR_MECA",
  28           "AFFE_CHAR_THER_F","IMPR_CO","DEFI_SQUELETTE","DEFI_FONCTION",
  29           "CALC_THETA","AFFE_MODELE","DYNA_NON_LINE","CALC_ELEM",
  30           "CALC_NO","EXTR_MODE","CALC_META","IMPR_RESU","TEST_RESU",
  31           "DEFI_THER_JOULE","DYNA_TRAN_EXPLI","DEBUT","CALC_CHAM_ELEM",
  32           "AFFE_CHAR_THER", "MACR_LIGN_COUPE","POST_RCCM","PROJ_MESU_MODAL",
  33           "CREA_RESU","CREA_CHAMP","DIST_LIGN_3D","MODI_MAILLAGE","LIRE_TABLE",
  34           "POST_SIMPLIFIE","AFFE_MATERIAU","DEFI_MAILLAGE","DEPL_INTERNE",
  35           "POST_DYNA_ALEA","RECU_FONCTION","DYNA_TRAN_MODAL","DEFI_INTERF_DYNA",
  36           "CALC_PRECONT","DEFI_TEXTURE","TEST_RESU","COMB_CHAM_NO","COMB_CHAM_ELEM",
  37           "CALC_FATIGUE","IMPR_OAR", "AFFE_CHAR_MECA_F",
  38            "MACR_ASCOUF_CALC","MACR_ASPIC_CALC","MACR_CABRI_CALC",
  39            "MACR_ADAP_MAIL","IMPR_FICO_HOMARD","DEFI_PART_FETI"
  40         )
  41
  42 dict_erreurs={
  43 #STA8
  44               "DIST_LIGN_3D": "la commande DIST_LIGN_3D a ete supprimee",
  45               "DEFI_THER_JOULE": "la commande DIST_LIGN_3D a ete supprimee",
  46               "DIST_LIGN_3D": "la commande DIST_LIGN_3D a ete supprimee",
  47               "AFFE_MODELE_AFFE": "Les modelisations APPUI_REP, ASSE_GRIL et 3D_JOINT_CT ont ete supprimees",
  48               "AFFE_CHAR_MECA_CONTACT_FROTTEMENT": "Suppression d un mot clef FROTTEMENT",
  49               "AFFE_CHAR_MECA_SECH_CALCULEE": "le sechage est maintenant une variable de commande",
  50               "AFFE_CHAR_MECA_HYDR_CALCULEE": "l'hydratation est maintenant une variable de commande",
  51               "AFFE_CHAR_MECA_EPSA_CALCULEE":"EPSA est maintenant une variable de commande",
  52               "AFFE_CHAR_MECA_PRESSION_CALCULEE":"PRESSION_CALCULEE est remplace par EVOL_CHAR",
  53               "MACR_LIGN_COUPE" : "MACR_LIGN_COUPE demande un traitement manuel",
  54               "POST_RCCM" : "POST_RCCM demande un traitement manuel",
  55               "DEFI_MATERIAU_CHABOCHE" : "remplacer la valeur CINx_CHAB",
  56               "DEFI_MATERIAU_POLY_CFC" : "le materiau POLY_CFC est remplace par le comportement POLYCRISTAL",
  57               "DEFI_MATERIAU_ECOU_PLAS1" : "le materiau ECOU_PLAS1 est supprime",
  58               "DEFI_MATERIAU_COMP_THM_ELAS_THM" : "le materiau ELAS_THM a ete supprime",
  59               "DEFI_MATERIAU_COMP_THM_SURF_ETAT_SATU" : "le materiau SURF_ETAT_SATU a ete supprime",
  60               "DEFI_MATERIAU_COMP_THM_SURF_ETAT_NSAT" : "le materiau SURF_ETAT_NSAT a ete supprime",
  61               "DEFI_MATERIAU_COMP_THM_CAM_CLAY_THM" : "le materiau CAM_CLAY_THM a ete supprime",
  62               "DEFI_MATERIAU_COMP_THM_LIQU_SATU_GAT" : "le materiau LIQU_SATU_GAT a ete supprime",
  63               "DEFI_MATERIAU_COMP_THM_LIQU_NSAT_GAT" : "le materiau LIQU_NSAT_GAT a ete supprime",
  64               "DEFI_MATERIAU_GLRC" : "le materiau GLRC a ete remplace par GLRC_DAMAGE",
  65               "DEFI_MATERIAU_GLRC_FO" : "le materiau GLRC_FO a ete remplace par GLRC_DAMAGE",
  66               "DEFI_MATERIAU_OHNO" : "le materiau OHNO a ete remplace par TAHERI",
  67               "DEFI_MATERIAU_OHNO_FO" : "le materiau OHNO a ete remplace par TAHERI",
  68               "CALC_CHAM_ELEM":"reecrire la partie SOUR_ELGA_ELEC",
  69               "CALC_G_THETA_T_OPTION_VALEUR":"verifier la valeur d OPTION",
  70               "CALC_G_THETA_T_OPTION_DEFAUT":"verifier la valeur d OPTION donnee a la place du defaut",
  71               "CALC_G_MODELE":"Mot Clef MODELE supprimé sous CALC_G",
  72               "CALC_G_DEPL":"Mot Clef DEPL supprimé sous CALC_G",
  73               "CALC_G_CHAM_MATER":"Mot Clef CHAM_MATER supprimé sous CALC_G",
  74               "CALC_G_CARA_ELEM":"Mot Clef CARA_ELEM supprimé sous CALC_G",
  75               "CALC_G_RESULTAT=XXX,":"Mot Clef RESULTAT à completer sous CALC_G",
  76               "AFFE_MODELE_AFFE_MODELISATION_VALEUR":"verifier la valeur de MODELISATION",
  77               "STAT_NON_LINE_COMP_INCR_RELATION_VALEUR":"verifier la valeur de RELATION",
  78               "STAT_NON_LINE_COMP_INCR_RELATION_KIT_VALEUR":"verifier la valeur de RELATION_KIT",
  79               "STAT_NON_LINE_VARI_COMM":"suppression des variables de commande",
  80               "STAT_NON_LINE_INCREMENT_SUBD_PAS":"Si SUBD_PAS=1 il n'y a pas subdivision : le mot est clef est ote du STAT_NON_LINE",
  81               "DYNA_NON_LINE_COMP_INCR_RELATION_VALEUR":"verifier la valeur de RELATION",
  82               "DYNA_NON_LINE_COMP_INCR_RELATION_KIT_VALEUR":"verifier la valeur de RELATION_KIT",
  83               "DYNA_NON_LINE_VARI_COMM":"suppression des variables de commande",
  84               "DYNA_NON_LINE_INCREMENT_SUBD_PAS":"Si SUBD_PAS=1 il n'y a pas subdivision : le mot est clef est ote du DYNA_NON_LINE",
  85               "CALC_PRECONT_SUBD_PAS":"Si SUBD_PAS=1 il n'y a pas subdivision : le mot est clef est ote du CALC_PRECONT",
  86               "TEST_RESU_UNITE":"suppression du mot clef UNITE dans TEST_RESU",
  87               "POST_SIMPLIFIE":"commande POST_SIMPLIFIE supprimee",
  88               "POST_DYNA_ALEA_GAUSS":"la methode GAUSS a ete supprimee de POST_DYNA_ALEA",
  89               "POST_DYNA_ALEA_VANMARCKE":"la methode VANMARCKE a ete supprimee de POST_DYNA_ALEA",
  90               "POST_DYNA_ALEA_DEPASSEMENT":"la methode DEPASSEMENT a ete supprimee de POST_DYNA_ALEA",
  91               "POST_DYNA_ALEA_RAYLEIGH":"la methode RAYLEIGH a ete supprimee de POST_DYNA_ALEA",
  92               "DYNA_TRAN_MODAL_EXCIT_NUME_MODE":"le numero du mode utilise pour EXCIT DYNA_TRAN_MODAL est le numero d'ORDRE",
  93               "DEFI_INTERF_DYNA_INTERFACE_DDL_ACTIF":"DDL_ACTIF supprime de DEFI_INTERF_DYNA; utiliser MASQUE",
  94               "DEFI_TEXTURE":"le materiau POLY_CFC est remplace par le comportement POLYCRISTAL",
  95               "CREA_RESU_NOM_CHAM_VALEUR":"HYDR_ELGA est remplace par HYDR_ELNO_ELGA et HYDR_NOEU_ELGA",
  96               "COMB_CHAM_NO":"COMB_CHAM_NO est remplace par CREA_CHAMP",
  97               "COMB_CHAM_ELEM":"COMB_CHAM_ELEM est remplace par CREA_CHAMP",
  98               "IMPR_OAR":"IMPR_OAR demande un traitement manuel",
  99               "IMPR_FICO_HOMARD":"IMPR_FICO_HOMARD a ete integre dans MACR_ADPA_MAIL",
 100              }
 101
 102 sys.dict_erreurs=dict_erreurs
 103
 104 #atraiter=( "MACR_ADAP_MAIL",)
 105
 106 def traduc(infile,outfile,flog=None):
 107
 108     hdlr=log.initialise(flog)
 109     jdc=getJDC(infile,atraiter)
 110     root=jdc.root
 111
 112     #Parse les mocles des commandes
 113     parseKeywords(root)
 114
 115     ####################### traitement erreurs ########################
 116     GenereErreurPourCommande(jdc,("DEBUT","POST_RCCM","DIST_LIGN_3D","IMPR_OAR","COMB_CHAM_NO","COMB_CHAM_ELEM"))
 117
 118     ####################### traitement CALC_META     #######################
 119     renameMotCleInFact(jdc,"CALC_META","ETAT_INIT","META_INIT","META_INIT_ELNO")
 120
 121     ####################### traitement CALC_FONCTION #######################
 122     removeMotCleSiRegle(jdc,"CALC_FONCTION","NOM_PARA",((("MAX"),"existeMCFParmi"),))
 123     renameCommandeSiRegle(jdc,"CALC_FONCTION","INFO_FONCTION", ((("RMS","MAX","NOCI_SEISME","NORME","ECART-TYPE"),"existeMCFParmi"),))
 124     renameMotCleInFact(jdc,"CALC_FONCTION","LISS_ENVELOP","FONCTION","NAPPE")
 125
 126     ####################### traitement IMPR_GENE     #######################
 127     moveMotCleFromFactToFather(jdc,"IMPR_GENE","GENE","UNITE")
 128     moveMotCleFromFactToFather(jdc,"IMPR_GENE","GENE","FORMAT")
 129
 130     ####################### traitement STAT/DYNA_NON_LINE #######################
 131     moveMotCleFromFactToFactMulti(jdc,"STAT_NON_LINE","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 132     moveMotCleFromFactToFactMulti(jdc,"STAT_NON_LINE","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 133     moveMotCleFromFactToFactMulti(jdc,"STAT_NON_LINE","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 134     moveMotCleFromFactToFactMulti(jdc,"STAT_NON_LINE","CONVERGENCE","RESO_INTE",("COMP_INCR","COMP_ELAS"))
 135     removeMotCleAvecErreur(jdc,"STAT_NON_LINE","VARI_COMM")
 136     moveMotCleFromFactToFactMulti(jdc,"DYNA_NON_LINE","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 137     moveMotCleFromFactToFactMulti(jdc,"DYNA_NON_LINE","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 138     moveMotCleFromFactToFactMulti(jdc,"DYNA_NON_LINE","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 139     moveMotCleFromFactToFactMulti(jdc,"DYNA_NON_LINE","CONVERGENCE","RESO_INTE",("COMP_INCR","COMP_ELAS"))
 140     removeMotCleAvecErreur(jdc,"DYNA_NON_LINE","VARI_COMM")
 141
 142     dStatNonLine={"ELAS":"ELAS_THER"}
 143     lavertit=("ELAS")
 144     ChangementValeurDsMCFAvecAvertissement(jdc,"STAT_NON_LINE","COMP_INCR","RELATION_KIT",dStatNonLine,lavertit)
 145
 146     lavertit=("CHABOCHE","ASSE_COMBU","OHNO","GLRC")
 147     dchaboche={"CHABOCHE":"VMIS_CIN1_CHAB","ASSE_COMBU":"XXX_IRA","OHNO":"VISC_TAHERI","GLRC":"GLRC_DAMAGE"}
 148     ChangementValeurDsMCFAvecAvertissement(jdc,"STAT_NON_LINE","COMP_INCR","RELATION",dchaboche,lavertit)
 149     ChangementValeurDsMCFAvecAvertissement(jdc,"DYNA_NON_LINE","COMP_INCR","RELATION",dchaboche,lavertit)
 150
 151     removeMotCleInFactSiRegle(jdc,"STAT_NON_LINE","INCREMENT","SUBD_PAS_MINI",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 152     removeMotCleInFactSiRegle(jdc,"STAT_NON_LINE","INCREMENT","COEF_SUBD_PAS_1",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 153     removeMotCleInFactSiRegleAvecErreur(jdc,"STAT_NON_LINE","INCREMENT","SUBD_PAS",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 154     AjouteMotClefDansFacteurSiRegle(jdc,"STAT_NON_LINE","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 155     renameMotCleInFact(jdc,"STAT_NON_LINE","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 156     removeMotCleInFactSiRegle(jdc,"DYNA_NON_LINE","INCREMENT","SUBD_PAS_MINI",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 157     removeMotCleInFactSiRegle(jdc,"DYNA_NON_LINE","INCREMENT","COEF_SUBD_PAS_1",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 158     removeMotCleInFactSiRegleAvecErreur(jdc,"DYNA_NON_LINE","INCREMENT","SUBD_PAS",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 159     AjouteMotClefDansFacteurSiRegle(jdc,"DYNA_NON_LINE","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 160     renameMotCleInFact(jdc,"DYNA_NON_LINE","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 161
 162     moveMotClefInOperToFact(jdc,"STAT_NON_LINE","PARM_THETA","COMP_INCR")
 163     moveMotClefInOperToFact(jdc,"DYNA_NON_LINE","PARM_THETA","COMP_INCR")
 164     moveMotClefInOperToFact(jdc,"DYNA_TRAN_EXPLI","PARM_THETA","COMP_INCR")
 165
 166     ####################### traitement DEFI_MATERIAU #######################
 167     renameMotCle(jdc,"DEFI_MATERIAU","LEMAITRE","LEMAITRE_IRRA")
 168     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","FLU_IRRA","QSR_K",("LEMAITRE_IRRA",))
 169     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","FLU_IRRA","BETA",("LEMAITRE_IRRA",))
 170     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","FLU_IRRA","PHI_ZERO",("LEMAITRE_IRRA",))
 171     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","FLU_IRRA","L",("LEMAITRE_IRRA",))
 172     removeMotCle(jdc,"DEFI_MATERIAU","FLU_IRRA")
 173     renameMotCleAvecErreur(jdc,"DEFI_MATERIAU","CHABOCHE","CINx_CHAB")
 174     renameMotCleAvecErreur(jdc,"DEFI_MATERIAU","OHNO","TAHERI")
 175     renameMotCleAvecErreur(jdc,"DEFI_MATERIAU","OHNO_FO","TAHERI_FO")
 176     renameMotCleAvecErreur(jdc,"DEFI_MATERIAU","GLRC","GLRC_DAMAGE")
 177     renameMotCleAvecErreur(jdc,"DEFI_MATERIAU","GLRC_FO","GLRC_DAMAGE")
 178
 179     renameMotCleInFact(jdc,"DEFI_MATERIAU","GRAN_IRRA","A","GRAN_A")
 180     renameMotCleInFact(jdc,"DEFI_MATERIAU","GRAN_IRRA","B","GRAN_B")
 181     renameMotCleInFact(jdc,"DEFI_MATERIAU","GRAN_IRRA","S","GRAN_S")
 182     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","GRAN_IRRA","GRAN_A",("LEMAITRE_IRRA",))
 183     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","GRAN_IRRA","GRAN_B",("LEMAITRE_IRRA",))
 184     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","GRAN_IRRA","GRAN_S",("LEMAITRE_IRRA",))
 185     removeMotCle(jdc,"DEFI_MATERIAU","GRAN_IRRA")
 186
 187     chercheOperInsereFacteurSiRegle(jdc,"DEFI_MATERIAU","ELAS",((("CABLE",),"existe"),))
 188     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","CABLE","E",  ("ELAS",))
 189     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","CABLE","NU", ("ELAS",))
 190     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","CABLE","RHO",("ELAS",))
 191     moveMotCleFromFactToFactMulti(jdc,"DEFI_MATERIAU","CABLE","ALPHA",("ELAS",))
 192     AjouteMotClefDansFacteurSiRegle(jdc,"DEFI_MATERIAU","ELAS","NU=0.,",((("ELAS","NU"),"nexistepasMCsousMCF"),))
 193
 194     removeMotCleAvecErreur(jdc,"DEFI_MATERIAU","POLY_CFC")
 195     removeMotCleAvecErreur(jdc,"DEFI_MATERIAU","ECOU_PLAS1")
 196
 197     lavertit=("ELAS_THM","SURF_ETAT_SATU","SURF_ETAT_NSAT","CAM_CLAY_THM","LIQU_SATU_GAT","LIQU_NSAT_GAT")
 198     dTHM={"ELAS_THM":"xxx", "SURF_ETAT_SATU":"xxx", "SURF_ETAT_NSAT":"xxx","CAM_CLAY_THM":"xxx","LIQU_SATU_GAT":"xxx","LIQU_NSAT_GAT":"xxx"}
 199     ChangementValeurAvecAvertissement(jdc,"DEFI_MATERIAU","COMP_THM",dTHM,lavertit)
 200
 201     dfatigue={"MATAKE":"MATAKE_MODI_AC", "DOMM_MAXI":"MATAKE_MODI_AV", "FATEMI_SOCIE":"FATESOCI_MODI_AV"}
 202     ChangementValeurDsMCF(jdc,"DEFI_MATERIAU","CISA_PLAN_CRIT","CRITERE",dfatigue)
 203
 204     ####################### traitement IMPR_CO       #######################
 205     chercheOperInsereFacteurSiRegle(jdc,"IMPR_CO","CONCEPT",((("CO",),"existe"),))
 206     moveMotClefInOperToFact(jdc,"IMPR_CO","CO","CONCEPT")
 207     renameMotCleInFact(jdc,"IMPR_CO","CONCEPT","CO","NOM")
 208
 209     ####################### traitement DEFI_SQUELETTE #######################
 210     chercheOperInsereFacteurSiRegle(jdc,"DEFI_SQUELETTE","CYCLIQUE",((("MODE_CYCL",),"existe"),))
 211     moveMotClefInOperToFact(jdc,"DEFI_SQUELETTE","MODE_CYCL","CYCLIQUE")
 212
 213     ####################### traitement AFFE_CHAR_*   #######################
 214     removeMotCle(jdc,"AFFE_CHAR_MECA","VERI_DDL")
 215     removeMotCle(jdc,"AFFE_CHAR_MECA","SECH_CALCULEE")
 216     removeMotCle(jdc,"AFFE_CHAR_MECA","HYDR_CALCULEE")
 217     removeMotCle(jdc,"AFFE_CHAR_MECA","PRESSION_CALCULEE")
 218     removeMotCleAvecErreur(jdc,"AFFE_CHAR_MECA","EPSA_CALCULEE")
 219     removeMotCle(jdc,"AFFE_CHAR_THER_F","VERI_DDL")
 220     removeMotCle(jdc,"AFFE_CHAR_THER","VERI_DDL")
 221
 222     ####################### traitement AFFE_CHAR_MECA (CONTACT)   #######################
 223     renameMotCleInFact(jdc,"AFFE_CHAR_MECA","CONTACT","COEF_MULT_ESCL","COEF_MULT")
 224     renameMotCleInFact(jdc,"AFFE_CHAR_MECA","CONTACT","NOM_CHAM","NOM_CMP")
 225     renameMotCleInFactSiRegle(jdc,"AFFE_CHAR_MECA","CONTACT","GROUP_MA_ESCL","GROUP_MA",((("CONTACT","NOM_CMP"),"existeMCsousMCF"),))
 226     renameMotCleSiRegle(jdc,"AFFE_CHAR_MECA","CONTACT","LIAISON_UNILATER",((("CONTACT","NOM_CMP"),"existeMCsousMCF"),))
 227     removeMotCleInFact(jdc,"AFFE_CHAR_MECA","LIAISON_UNILATER","APPARIEMENT")
 228
 229     ####################### traitement AFFE_CHAR_MECA_F (CONTACT)   #######################
 230     renameMotCleInFact(jdc,"AFFE_CHAR_MECA_F","CONTACT","COEF_MULT_ESCL","COEF_MULT")
 231     renameMotCleInFact(jdc,"AFFE_CHAR_MECA_F","CONTACT","NOM_CHAM","NOM_CMP")
 232     renameMotCleInFactSiRegle(jdc,"AFFE_CHAR_MECA_F","CONTACT","GROUP_MA_ESCL","GROUP_MA",((("CONTACT","NOM_CMP"),"existeMCsousMCF"),))
 233     renameMotCleSiRegle(jdc,"AFFE_CHAR_MECA_F","CONTACT","LIAISON_UNILATER",((("CONTACT","NOM_CMP"),"existeMCsousMCF"),))
 234     removeMotCleInFact(jdc,"AFFE_CHAR_MECA_F","LIAISON_UNILATER","APPARIEMENT")
 235
 236     ####################### traitement CALC_G   #######################
 237     chercheOperInsereFacteurSiRegle(jdc,"CALC_G_LOCAL_T","LISSAGE",((("LISSAGE_G","LISSAGE_THETA","DEGRE"),"existeMCFParmi"),))
 238     moveMotClefInOperToFact(jdc,"CALC_G_LOCAL_T","LISSAGE_THETA","LISSAGE")
 239     moveMotClefInOperToFact(jdc,"CALC_G_LOCAL_T","LISSAGE_G","LISSAGE")
 240     moveMotClefInOperToFact(jdc,"CALC_G_LOCAL_T","DEGRE","LISSAGE")
 241
 242     dlocal={"CALC_G_LGLO":"G_LAGR", "G_BILINEAIRE":"G_BILI", "CALC_G_MAX":"G_MAX"}
 243     ChangementValeur(jdc,"CALC_G_LOCAL_T","OPTION",dlocal)
 244     #
 245     dtheta={"CALC_G_LAGR":"G_LAGR_GLOB", "G_BILINEAIRE":"G_BILI_GLOB", "CALC_G_MAX":"G_MAX_GLOB","CALC_G":"CALC_G_GLOB"}
 246     # Attention si le defaut doit generer un avertissement Il faut le mettre comme dernier mot de la liste
 247     lavertit=("CALC_G_LAGR","CALC_G","defaut")
 248     ChangementValeurAvecAvertissement(jdc,"CALC_G_THETA_T","OPTION",dtheta,lavertit)
 249     renameOper(jdc,"CALC_G_LOCAL_T","CALC_G")
 250     renameOper(jdc,"CALC_G_THETA_T","CALC_G")
 251
 252     # Attention cela necessite un traitement particulier et ne peut pas etre generalise tel quel
 253     # Attention egalement doit etre fait avant le regroupement dans THETA
 254     calcG.traitementRayon(jdc)
 255     renameMotCle(jdc,"CALC_G","THETA","THETA_OLD")
 256     chercheOperInsereFacteur(jdc,"CALC_G","THETA")
 257     moveMotClefInOperToFact(jdc,"CALC_G","THETA_OLD","THETA")
 258     renameMotCleInFact(jdc,"CALC_G","THETA","THETA_OLD","THETA")
 259
 260     moveMotClefInOperToFact(jdc,"CALC_G","FOND_FISS","THETA")
 261     moveMotClefInOperToFact(jdc,"CALC_G","R_INF_FO","THETA")
 262     moveMotClefInOperToFact(jdc,"CALC_G","R_SUP_FO","THETA")
 263     moveMotClefInOperToFact(jdc,"CALC_G","R_INF","THETA")
 264     moveMotClefInOperToFact(jdc,"CALC_G","R_SUP","THETA")
 265     moveMotClefInOperToFact(jdc,"CALC_G","FISSURE","THETA")
 266     renameMotCleInFactSiRegle(jdc,"CALC_G","THETA","THETA","THETA_LAGR",((("THETA","R_INF"),"existeMCsousMCF"),))
 267     renameMotCleInFactSiRegle(jdc,"CALC_G","THETA","THETA","THETA_LAGR",((("THETA","R_SUP"),"existeMCsousMCF"),))
 268     moveMotCleFromFactToFather(jdc,"CALC_G","THETA","THETA_LAGR")
 269     removeMotCleAvecErreur(jdc,"CALC_G","MODELE")
 270     removeMotCleAvecErreur(jdc,"CALC_G","DEPL")
 271     removeMotCleAvecErreur(jdc,"CALC_G","CHAM_MATER")
 272     removeMotCleAvecErreur(jdc,"CALC_G","CARA_ELEM")
 273     chercheOperInsereFacteurSiRegleAvecAvertissement(jdc,"CALC_G","RESULTAT=XXX,",((("THETA_LAGR",),"existeMCFParmi"),),0)
 274
 275     ####################### traitement AFFE_MODELE   #######################
 276     daffeModele={"PLAN_FISSURE":"PLAN_JOINT", "AXIS_FISSURE":"AXIS_JOINT"}
 277     ChangementValeurDsMCF(jdc,"AFFE_MODELE","AFFE","MODELISATION",daffeModele)
 278     removeMotCleSiRegleAvecErreur(jdc,"AFFE_MODELE","AFFE",((("AFFE","MODELISATION","APPUI_REP",jdc),"MCsousMCFaPourValeur"),))
 279     removeMotCleSiRegleAvecErreur(jdc,"AFFE_MODELE","AFFE",((("AFFE","MODELISATION","ASSE_GRIL",jdc),"MCsousMCFaPourValeur"),))
 280     removeMotCleSiRegleAvecErreur(jdc,"AFFE_MODELE","AFFE",((("AFFE","MODELISATION","3D_JOINT_CT",jdc),"MCsousMCFaPourValeur"),))
 281     renameMotCleInFact(jdc,"AFFE_MODELE","AFFE_SOUS_STRUC","MAILLE","SUPER_MAILLE")
 282
 283     ####################### traitement PROJ_MESU_MODAL #######################
 284     removeMotCleInFact(jdc,"PROJ_MESU_MODAL","MODELE_MESURE","NOM_PARA")
 285     removeMotCleInFactSiRegleAvecErreur(jdc,"AFFE_CHAR_MECA","CONTACT","FROTTEMENT",((("CONTACT","METHODE","CONTRAINTE",jdc),"MCsousMCFaPourValeur"),))
 286
 287     ####################### traitement CALC_ELEM / CALC_NO #######################
 288     dcalcelemno={"ERRE_ELGA_NORE":"ERRE_ELEM_SIGM","ERRE_ELEM_NOZ1":"ERZ1_ELEM_SIGM","ERRE_ELEM_NOZ2":"ERZ2_ELEM_SIGM","ERRE_ELNO_ELGA":"ERRE_ELNO_ELEM","ERRE_NOEU_ELGA":"ERRE_NOEU_ELEM","ERTH_ELEM_TEMP":"ERRE_ELEM_TEMP","ERTH_ELNO_ELEM":"ERRE_ELNO_ELEM","EPGR_ELNO":"EPFP_ELNO","EPGR_ELGA":"EPFP_ELGA","DURT_ELGA_TEMP":"DURT_ELNO_TEMP"}
 289     ChangementValeur(jdc,"CALC_ELEM","OPTION",dcalcelemno)
 290     ChangementValeur(jdc,"CALC_NO","OPTION",dcalcelemno)
 291     ChangementValeurDsMCF(jdc,"IMPR_RESU","RESU","NOM_CHAM",dcalcelemno)
 292     ChangementValeur(jdc,"TEST_RESU","RESU",dcalcelemno)
 293     removeMotCleAvecErreur(jdc,"TEST_RESU","UNITE")
 294
 295     chercheOperInsereFacteurSiRegle(jdc,"CALC_ELEM","REPE_COQUE",((("NUME_COUCHE","NIVE_COUCHE","ANGLE","PLAN"),"existeMCFParmi"),))
 296     moveMotClefInOperToFact(jdc,"CALC_ELEM","NIVE_COUCHE","REPE_COQUE")
 297     moveMotClefInOperToFact(jdc,"CALC_ELEM","NUME_COUCHE","REPE_COQUE")
 298     moveMotClefInOperToFact(jdc,"CALC_ELEM","ANGLE","REPE_COQUE")
 299     moveMotClefInOperToFact(jdc,"CALC_ELEM","PLAN","REPE_COQUE")
 300
 301
 302     ####################### traitement EXTR_MODE #######################
 303     AjouteMotClefDansFacteurSiRegle(jdc,"EXTR_MODE","FILTRE_MODE","SEUIL=1.E-3", ((("FILTRE_MODE","CRIT_EXTR",),"existeMCsousMCF"),(("FILTRE_MODE","SEUIL",),"nexistepasMCsousMCF")))
 304
 305     ####################### traitement DYNA_TRAN_EXPLI #######################
 306     removeMotCle(jdc,"DYNA_TRAN_EXPLI","NEWMARK")
 307     removeMotCle(jdc,"DYNA_TRAN_EXPLI","HHT")
 308     chercheOperInsereFacteur(jdc,"DYNA_TRAN_EXPLI","DIFF_CENT")
 309
 310     ####################### traitement CREA_RESU #######################
 311     dcrearesu={"HYDR_ELGA":"HYDR_NOEU_ELGA"}
 312     lavertit=("HYDR_ELGA",)
 313     ChangementValeur(jdc,"CREA_RESU","NOM_CHAM",dcrearesu,lavertit)
 314
 315     ####################### traitement CREA_CHAMP #######################
 316     dcrearesu={"HYDR_ELGA":"HYDR_ELNO_ELGA"}
 317     lavertit=("HYDR_ELGA",)
 318     ChangementValeur(jdc,"CREA_CHAMP","NOM_CHAM",dcrearesu,lavertit)
 319     ChangementValeur(jdc,"CREA_CHAMP","TYPE_CHAM",dcrearesu,lavertit)
 320
 321     ####################### traitement TEST_RESU #######################
 322     dcrearesu={"HYDR_ELGA":"HYDR_NOEU_ELGA"}
 323     lavertit=("HYDR_ELGA",)
 324     ChangementValeurDsMCFAvecAvertissement(jdc,"TEST_RESU","RESU","NOM_CHAM",dcrearesu,lavertit)
 325
 326     ####################### traitement DEBUT #######################
 327     removeMotCleSiRegle(jdc,"DEBUT","BASE",((("BASE","FICHIER","LOCALE",jdc),"MCsousMCFaPourValeur"),))
 328
 329     ####################### traitement DEFI_THER_JOULE #######################
 330     removeCommande(jdc,"DEFI_THER_JOULE")
 331
 332     ####################### traitement CALC_CHAM_ELEM #######################
 333     removeCommandeSiRegleAvecErreur(jdc,"CALC_CHAM_ELEM",((("OPTION","SOUR_ELGA_ELEC",jdc),"MCaPourValeur"),))
 334
 335     ####################### traitement MACR_LIGNE_COUPE #######################
 336     AppelleMacroSelonValeurConcept(jdc,"MACR_LIGN_COUPE",("LIGN_COUPE","TABLE"))
 337     removeMotCleInFact(jdc,"MACR_LIGN_COUPE","LIGN_COUPE","TABLE")
 338
 339     ####################### traitement MODI_MAILLAGE #######################
 340     removeMotCle(jdc,"MODI_MAILLAGE","MODELE")
 341
 342     ####################### traitement LIRE_TABLE #######################
 343     removeMotCle(jdc,"LIRE_TABLE","TYPE_TABLE")
 344
 345     ####################### traitement POST_SIMPLIFIE #######################
 346     removeCommande(jdc,"POST_SIMPLIFIE")
 347
 348     ####################### traitement AFFE_MATERIAU #######################
 349     removeMotCleInFact(jdc,"AFFE_MATERIAU","AFFE","SECH_REF")
 350
 351     ####################### traitement DEFI_MAILLAGE #######################
 352     renameMotCleInFact(jdc,"DEFI_MAILLAGE","DEFI_MAILLE","MAILLE","SUPER_MAILLE")
 353     renameMotCle(jdc,"DEFI_MAILLAGE","DEFI_MAILLE","DEFI_SUPER_MAILLE")
 354     renameMotCleInFact(jdc,"DEFI_MAILLAGE","RECO_GLOBAL","MAILLE","SUPER_MAILLE")
 355     renameMotCleInFact(jdc,"DEFI_MAILLAGE","RECO_MAILLE","MAILLE","SUPER_MAILLE")
 356     renameMotCle(jdc,"DEFI_MAILLAGE","RECO_MAILLE","RECO_SUPER_MAILLE")
 357     renameMotCleInFact(jdc,"DEFI_MAILLAGE","DEFI_NOEUD","MAILLE","SUPER_MAILLE")
 358     renameMotCleInFact(jdc,"DEFI_MAILLAGE","DEFI_GROUP_NO","MAILLE","SUPER_MAILLE")
 359
 360     ####################### traitement DEPL_INTERNE #######################
 361     renameMotCle(jdc,"DEPL_INTERNE","MAILLE","SUPER_MAILLE")
 362
 363
 364     ####################### traitement POST_DYNA_ALEA #######################
 365     removeMotCleAvecErreur(jdc,"POST_DYNA_ALEA","GAUSS")
 366     removeMotCleAvecErreur(jdc,"POST_DYNA_ALEA","RAYLEIGH")
 367     removeMotCleAvecErreur(jdc,"POST_DYNA_ALEA","DEPASSEMENT")
 368     removeMotCleAvecErreur(jdc,"POST_DYNA_ALEA","VANMARCKE")
 369
 370     ####################### traitement RECU_FONCTION #######################
 371 # il faut aussi ajouter la regle suivante :
 372 # s'il existe TYPE_RESU='FONCTION_C', renommer NOM_PARA_TABL='FONCTION_C'
 373     removeMotCleSiRegle(jdc,"RECU_FONCTION","NOM_PARA_TABL",((("TYPE_RESU","FONCTION_C",jdc),"MCaPourValeur"),))
 374     chercheOperInsereFacteurSiRegle(jdc,"RECU_FONCTION","NOM_PARA_TABL='FONCTION_C',",((("TYPE_RESU","FONCTION_C",jdc),"MCaPourValeur"),),estunFacteur=0)
 375     removeMotCle(jdc,"RECU_FONCTION","TYPE_RESU")
 376     chercheOperInsereFacteurSiRegle(jdc,"RECU_FONCTION","NOM_PARA_TABL='FONCTION',",((("OBSTACLE",),"existe"),),estunFacteur=0)
 377     chercheOperInsereFacteurSiRegle(jdc,"RECU_FONCTION","FILTRE",((("OBSTACLE",),"existe"),))
 378     AjouteMotClefDansFacteurSiRegle(jdc,"RECU_FONCTION","FILTRE","NOM_PARA='LIEU',",((("OBSTACLE",),"existe"),))
 379     AjouteMotClefDansFacteurSiRegle(jdc,"RECU_FONCTION","FILTRE","VALE_K='DEFIOBST',",((("OBSTACLE",),"existe"),))
 380     renameMotCle(jdc,"RECU_FONCTION","OBSTACLE","TABLE")
 381
 382     ####################### traitement DYNA_TRAN_MODAL #######################
 383     renameMotCleInFact(jdc,"DYNA_TRAN_MODAL","EXCIT","NUME_MODE","NUME_ORDRE",erreur=1)
 384
 385     ####################### traitement DEFI_INTERF_DYNA #######################
 386     removeMotCleInFact(jdc,"DEFI_INTERF_DYNA","INTERFACE","DDL_ACTIF",erreur=1)
 387
 388
 389     ####################### traitement CALC_PRECONT #######################
 390     removeMotCleInFactSiRegle(jdc,"CALC_PRECONT","INCREMENT","SUBD_PAS_MINI",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 391     removeMotCleInFactSiRegle(jdc,"CALC_PRECONT","INCREMENT","COEF_SUBD_PAS_1",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 392     removeMotCleInFactSiRegleAvecErreur(jdc,"CALC_PRECONT","INCREMENT","SUBD_PAS",((("INCREMENT","SUBD_PAS","1",jdc),"MCsousMCFaPourValeur"),))
 393     AjouteMotClefDansFacteurSiRegle(jdc,"CALC_PRECONT","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 394     moveMotCleFromFactToFactMulti(jdc,"CALC_PRECONT","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 395     moveMotCleFromFactToFactMulti(jdc,"CALC_PRECONT","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 396     moveMotCleFromFactToFactMulti(jdc,"CALC_PRECONT","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 397     moveMotCleFromFactToFactMulti(jdc,"CALC_PRECONT","CONVERGENCE","RESO_INTE",("COMP_INCR","COMP_ELAS"))
 398     renameMotCleInFact(jdc,"CALC_PRECONT","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 399
 400
 401     ####################### traitement DEFI_TEXTURE #######################
 402     removeCommande(jdc,"DEFI_TEXTURE")
 403
 404
 405     ####################### traitement COMB_CHAM_NO #######################
 406     renameMotCleInFact(jdc,"COMB_CHAM_NO","COMB_C","CHAM_NO","CHAM_GD")
 407     chercheOperInsereFacteur(jdc,"COMB_CHAM_NO","TYPE_CHAM='xxx',",estunFacteur=0,erreur=1)
 408     chercheOperInsereFacteur(jdc,"COMB_CHAM_NO","MODELE=xxx,",estunFacteur=0,erreur=1)
 409     chercheOperInsereFacteur(jdc,"COMB_CHAM_NO","OPERATION='ASSE',",estunFacteur=0,erreur=1)
 410     renameMotCle(jdc,"COMB_CHAM_NO","COMB_C","ASSE")
 411     AjouteMotClefDansFacteur(jdc,"COMB_CHAM_NO","ASSE","CUMUL='NON',")
 412     AjouteMotClefDansFacteur(jdc,"COMB_CHAM_NO","ASSE","TOUT='OUI',")
 413     renameOper(jdc,"COMB_CHAM_NO","CREA_CHAMP")
 414
 415
 416     ####################### traitement MACR_ASCOUF_CALC #######################
 417     AjouteMotClefDansFacteurSiRegle(jdc,"MACR_ASCOUF_CALC","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 418     renameMotCleInFact(jdc,"MACR_ASCOUF_CALC","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 419     moveMotCleFromFactToFactMulti(jdc,"MACR_ASCOUF_CALC","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 420     moveMotCleFromFactToFactMulti(jdc,"MACR_ASCOUF_CALC","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 421     moveMotCleFromFactToFactMulti(jdc,"MACR_ASCOUF_CALC","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 422     moveMotCleFromFactToFactMulti(jdc,"MACR_ASCOUF_CALC","CONVERGENCE","RESO_INTE",("COMP_INCR","COMP_ELAS"))
 423
 424
 425     ####################### traitement MACR_ASPIC_CALC #######################
 426     AjouteMotClefDansFacteurSiRegle(jdc,"MACR_ASPIC_CALC","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 427     renameMotCleInFact(jdc,"MACR_ASPIC_CALC","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 428     moveMotCleFromFactToFactMulti(jdc,"MACR_ASPIC_CALC","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 429     moveMotCleFromFactToFactMulti(jdc,"MACR_ASPIC_CALC","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 430     moveMotCleFromFactToFactMulti(jdc,"MACR_ASPIC_CALC","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 431
 432
 433     ####################### traitement MACR_CABRI_CALC #######################
 434     AjouteMotClefDansFacteurSiRegle(jdc,"MACR_CABRI_CALC","INCREMENT","SUBD_METHODE='UNIFORME',",((("INCREMENT","SUBD_PAS"),"existeMCsousMCF"),))
 435     renameMotCleInFact(jdc,"MACR_CABRI_CALC","INCREMENT","COEF_SUBD_PAS_1","SUBD_COEF_PAS_1")
 436     moveMotCleFromFactToFactMulti(jdc,"MACR_CABRI_CALC","CONVERGENCE","RESI_INTE_RELA",("COMP_INCR","COMP_ELAS"))
 437     moveMotCleFromFactToFactMulti(jdc,"MACR_CABRI_CALC","CONVERGENCE","ITER_INTE_MAXI",("COMP_INCR","COMP_ELAS"))
 438     moveMotCleFromFactToFactMulti(jdc,"MACR_CABRI_CALC","CONVERGENCE","ITER_INTE_PAS",("COMP_INCR","COMP_ELAS"))
 439
 440
 441     ####################### traitement CALC_FATIGUE #######################
 442     dfatigue={"MATAKE":"MATAKE_MODI_AC", "DOMM_MAXI":"MATAKE_MODI_AV", "FATEMI_SOCIE":"FATESOCI_MODI_AV"}
 443     ChangementValeur(jdc,"CALC_FATIGUE","CRITERE",dfatigue)
 444
 445     ####################### traitement DEFI_PART_FETI #######################
 446     removeMotCleSiRegle(jdc,"DEFI_PART_FETI","MAILLAGE", ((("MODELE",),"existeMCFParmi"),(("MAILLAGE",),"existeMCFParmi")))
 447
 448     ####################### traitement MACR_ADAP_MAIL #######################
 449     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","MAILLAGE_N")
 450     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","MAILLAGE_NP1")
 451     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","RESULTAT_N")
 452     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","INDICATEUR")
 453     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","NOM_CMP_INDICA")
 454     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_RAFF_PE")
 455     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_RAFF_ABS")
 456     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_RAFF_REL")
 457     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_DERA_PE")
 458     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_DERA_ABS")
 459     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRIT_DERA_REL")
 460     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","NIVE_MAX")
 461     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","INST")
 462     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","PRECISION")
 463     moveMotCleFromFactToFather(jdc,"MACR_ADAP_MAIL","ADAPTATION","CRITERE")
 464     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='RAFFINEMENT',",((("ADAPTATION","LIBRE","RAFFINEMENT",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 465     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='DERAFFINEMENT',",((("ADAPTATION","LIBRE","DERAFFINEMENT",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 466     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='RAFF_DERA',",((("ADAPTATION","LIBRE","RAFF_DERA",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 467     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='RAFFINEMENT_UNIFORME',",((("ADAPTATION","UNIFORME","RAFFINEMENT",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 468     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='DERAFFINEMENT_UNIFORME',",((("ADAPTATION","UNIFORME","DERAFFINEMENT",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 469     chercheOperInsereFacteurSiRegle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW='RIEN',",((("ADAPTATION","UNIFORME","RIEN",jdc),"MCsousMCFaPourValeur"),),estunFacteur=0)
 470     removeMotCle(jdc,"MACR_ADAP_MAIL","ADAPTATION")
 471     renameMotCle(jdc,"MACR_ADAP_MAIL","ADAPTATIONEW","ADAPTATION")
 472     dcalcelemno={"ERRE_ELGA_NORE":"ERRE_ELEM_SIGM","ERRE_ELEM_NOZ1":"ERZ1_ELEM_SIGM","ERRE_ELEM_NOZ2":"ERZ2_ELEM_SIGM","ERRE_ELNO_ELGA":"ERRE_ELNO_ELEM","ERRE_NOEU_ELGA":"ERRE_NOEU_ELEM","ERTH_ELEM_TEMP":"ERRE_ELEM_TEMP","ERTH_ELNO_ELEM":"ERRE_ELNO_ELEM","EPGR_ELNO":"EPFP_ELNO","EPGR_ELGA":"EPFP_ELGA","DURT_ELGA_TEMP":"DURT_ELNO_TEMP"}
 473     ChangementValeur(jdc,"MACR_ADAP_MAIL","ADAPTATION",dcalcelemno)
 474
 475
 476     ####################### traitement IMPR_FICO_HOMARD #######################
 477     removeCommande(jdc,"IMPR_FICO_HOMARD")
 478
 479
 480     #########################################################################
 481
 482
 483     f=open(outfile,'w')
 484     f.write(jdc.getSource())
 485     f.close()
 486
 487     log.ferme(hdlr)
 488
 489 def main():
 490     parser = optparse.OptionParser(usage=usage)
 491
 492     parser.add_option('-i','--infile', dest="infile", default='toto.comm',
 493         help="Le fichier à traduire")
 494     parser.add_option('-o','--outfile', dest="outfile", default='tutu.comm',
 495         help="Le fichier traduit")
 496
 497     options, args = parser.parse_args()
 498     traduc(options.infile,options.outfile)
 499
 500 if __name__ == '__main__':
 501     main()
 502