8 def __convert__(self,valeur):
9 if type(valeur) == types.StringType: return None
10 if len(valeur) != self.ntuple: return None
14 return "Date : jj/mm/aaaa "
21 def __init__(self,ntuple):
24 def __convert__(self,valeur):
25 if type(valeur) == types.StringType:
27 if len(valeur) != self.ntuple:
32 return "Tuple de %s elements" % self.ntuple
36 JdC = JDC_CATA (code = 'TELEMAC',
39 # ======================================================================
40 # Catalog entry for the MAP function : c_pre_interfaceBody_mesh
41 # ======================================================================
43 # -----------------------------------------------------------------------
44 INITIALIZATION = PROC(nom = "INITIALIZATION",op = None,
45 # -----------------------------------------------------------------------
47 fr = "Initialisation des fichiers d'entrée et de sortie",
48 ang = "Input and Output files initialization",
49 UIinfo = { "groupes" : ( "CACHE", )},
50 #UIinfo = { "groupes" : ( "iiii", )},
52 # ------------------------------------
53 Title = SIMP( statut = 'o',typ = 'TXM',
54 # ------------------------------------
55 fr = 'Titre du cas etudie. Ce titre figurera sur les dessins.',
56 ang = 'Title of the case being considered. This title shall be marked on the drawings.'),
57 #Working_Directory = SIMP( statut='o',typ='Repertoire',defaut='/tmp'),
59 # ------------------------------------
60 Input_Files = FACT(statut='o',
61 # ------------------------------------
63 # Dictionary = SIMP( statut='o', typ = ('Fichier', 'Dico (*.dico);;All Files (*)',),
64 # defaut='telemac2d.dico',
65 # fr='Dictionnaire des mots cles.', ang='Key word dictionary.',),
66 # PN : le mot cle doit etre dans le dictionnaire et repris du catalogue mais n
69 # ------------------------------------
70 Geometry_File_Format = SIMP( statut = 'o', typ = 'TXM',
71 # ------------------------------------
72 into = ['Serafin', 'MED', 'SerafinD'],
74 fr = 'Format du fichier de geometrie. Les valeurs possibles sont : \n \
75 - SERAFIN : format standard simple precision pour Telemac; \n \
76 - SERAFIND: format standard double precision pour Telemac; \n \
77 - MED : format MED base sur HDF5',
78 ang = 'Results file format. Possible values are: \n\
79 - SERAFIN : classical single precision format in Telemac;\n\
80 - SERAFIND: classical double precision format in Telemac;\n\
81 - MED : MED format based on HDF5',) ,
83 # ------------------------------------
84 Geometry_File = SIMP( statut = 'o',
85 # ------------------------------------
86 # PNPNPN Question Soizic --> pourqoi Geo Files
87 # idem pour Bottom_Topography_File
88 typ = ('Fichier', 'Geo Files (*.geo);;All Files (*)',),
89 fr = 'Nom du fichier contenant le maillage du calcul a realiser.',
90 ang = 'Name of the file containing the mesh. \n\
91 This file may also contain the topography and the friction coefficients.'),
93 #Steering_File = SIMP( statut = 'o', typ = ('Fichier', 'Steering Files (*.cas);;All Files (*)',),),
96 # ------------------------------------
97 Fortran_File = SIMP(statut = 'f',
98 # ------------------------------------
99 typ = ('Fichier', 'Fortran files (*.f);;All Files (*)'),
100 fr = 'Nom du fichier a soumettre',
101 ang = 'Name of FORTRAN file to be submitted',),
103 # ------------------------------------
104 Bottom_Topography_File = SIMP( statut = 'f',
105 # ------------------------------------
106 typ = ('Fichier', 'Geo Files (*.geo);;All Files (*)',),
107 fr = "Nom du fichier eventuel contenant la bathymetrie associee au maillage. \
108 Si ce mot-cle est utilise; c'est cette bathymetrie qui sera utilisee pour le calcul.",
109 ang = 'Name of the possible file containing the bathymetric data.\
110 Where this keyword is used, these bathymetric data shall be used in the computation.',
113 # ------------------------------------
114 Bottom_Smoothings = SIMP( statut = 'o',typ = 'I', defaut = 0 ,
115 # ------------------------------------
116 fr = 'Nombre de lissages effectues sur la topographie. chaque lissage, effectue a l aide dune matrice de masse, est conservatif.\n\
117 Utilise lorsque les donnees de bathymetrie donnent des resultats trop irreguliers apres interpolation.',
118 ang = 'Number of smoothings on bottom topography. each smoothing is mass conservative. \n\
119 to be used when interpolation of bathymetry on the mesh gives very rough results.',),
121 # ------------------------------------
122 Boundary_Conditions_File = SIMP( statut = 'o',
123 # ------------------------------------
124 typ = ('Fichier', 'Boundary Condition (*.cli);;All Files (*)',),
125 fr = 'Nom du fichier contenant les types de conditions aux limites. Ce fichier est rempli de facon automatique\n\
126 par le mailleur au moyen de couleurs affectees aux noeuds des frontieres du domaine de calcul.',
127 ang = 'Name of the file containing the types of boundary conditions. This file is filled automatically\n\
128 by the mesh generator through through colours that are assigned to the boundary nodes.',),
131 # ------------------------------------
132 Validation = FACT( statut = 'f',
133 # ------------------------------------
134 #PNPN--> creer le Mot_clef simple Validation si ce fact existe
136 # ------------------------------------
137 Reference_File_Format = SIMP( statut = 'o',
138 # ------------------------------------
140 into = ['Serafin','MED','SerafinD'],
142 fr = 'Format du fichier de resultats. Les valeurs possibles sont : \n\
143 - SERAFIN : format standard simple precision pour Telemac; \n\
144 - SERAFIND: format standard double precision pour Telemac; \n\
145 - MED : format MED base sur HDF5' ,
146 ang = 'Results file format. Possible values are:\n \
147 - SERAFIN : classical single precision format in Telemac;\n\
148 - SERAFIND: classical double precision format in Telemac; \n\
149 - MED : MED format based on HDF5' ,),
151 # ------------------------------------
152 Reference_File = SIMP( statut = 'o',
153 # ------------------------------------
154 typ = ('Fichier', 'Reference File (*.ref);;All Files (*)',),
155 fr = 'Fichier de resultats de reference pour la validation. Les resultats a placer dans ce fichier seront a ecrire sur le canal 22.',
156 ang = 'Binary-coded result file for validation. The results to be entered into this file shall be written on channel 22.',),
158 ), # Fin de Validation
160 # ------------------------------------
161 Formatted_And_Binary_Files = FACT( statut = 'f',
162 # ------------------------------------
164 # ------------------------------------
165 Formatted_Data_File_1 = SIMP( statut = 'f', typ = ('Fichier', 'formated File (*.txt);;All Files (*)',),
166 # ------------------------------------
167 fr = "Fichier de donnees formate mis a la disposition de l''utilisateur. \n\
168 Les donnees de ce fichier seront a lire sur le canal 26.",
169 ang = 'Formatted data file made available to the user.\n\
170 The data in this file shall be read on channel 26.',),
172 # ------------------------------------
173 Formatted_Data_File_2 = SIMP( statut = 'f', typ = ('Fichier', 'formated File (*.txt);;All Files (*)',),
174 # ------------------------------------
175 fr = "Fichier de donnees formate mis a la disposition de l'utilisateur. \n\
176 Les donnees de ce fichier seront a lire sur le canal 27.",
177 ang = "Formatted data file made available to the user.\n\
178 The data in this file shall be read on channel 27.",),
180 # ------------------------------------
181 Binary_Data_File_1 = SIMP( statut = 'f', typ = ('Fichier', 'All Files (*)',),
182 # ------------------------------------
183 fr = 'Fichier de donnees code en binaire mis a la disposition de l utilisateur. \n\
184 Les donnees de ce fichier seront a lire sur le canal 24.',
185 ang = 'Binary-coded data file made available to the user.\n\
186 The data in this file shall be read on channel 24.',),
188 # ------------------------------------
189 Binary_Data_File_2 = SIMP( statut = 'f', typ = ('Fichier', 'All Files (*)',),
190 # ------------------------------------
191 fr = 'Fichier de donnees code en binaire mis a la disposition de l utilisateur.\n\
192 Les donnees de ce fichier seront a lire sur le canal 25.',
193 ang = 'Binary-coded data file made available to the user. \n\
194 The data in this file shall be read on channel 25.',),
196 ), # fin Formatted_And_Binary_Files
198 ), # Fin de InputFile
200 # -----------------------------------------------------------------------
201 Initial_State = FACT(statut='o',
202 # -----------------------------------------------------------------------
204 # ------------------------------------
205 Initial_Conditions = SIMP(statut = 'o',typ = 'TXM',
206 # ------------------------------------
207 into = ['Zero elevation','Constant elevation','Zero depth','Constant depth','Special','TPXO satellite altimetry'],
208 defaut = 'Zero elevation',
209 fr = "Permet de definir les conditions initiales sur les hauteurs d'eau. Les valeurs possibles sont :\n\
210 - COTE NULLE. Initialise la cote de surface libre a 0. \nLes hauteurs d'eau initiales sont alors retrouvees en faisant la difference entre les cotes de surface libre et du fond. \n\
211 - COTE CONSTANTE . Initialise la cote de surface libre a la valeur donnee par le mot-cle COTE INITIALE. Les hauteurs d'eau initiales sont calculees comme precedemment.\n\
212 - HAUTEUR NULLE .Initialise les hauteurs d'eau a 0. \n\
213 - HAUTEUR CONSTANTE. Initialise les hauteurs d'eau a la valeur donnee par le mot-cle HAUTEUR INITIALE. \n\
214 - PARTICULIERES. Les conditions initiales sur la hauteur d'eau doivent etre precisees dans le sous-programme CONDIN. \n\
215 - ALTIMETRIE SATELLITE TPXO. Les conditions initiales sur la hauteur d'eau et les vitesses sont etablies sur \n\
216 la base des donnees satellite TPXO dont les 8 premiers constistuents ont ete extraits et sauves dans le fichier\n\
217 BASE DE DONNEES DE MAREE." ,
218 ang = 'Makes it possible to define the initial conditions with the water depth. The possible values are : \n\
219 - ZERO ELEVATION. Initializes the free surface elevation to 0. \n The initial water depths are then found by computing the difference between the free surface and the bottom. \n\
220 - CONSTANT ELEVATION. Initializes the water elevation to the value given by the keyword \n\
221 - INITIAL ELEVATION. The initial water depths are computed as in the previous case. \n\
222 - ZERO DEPTH. Initializes the water depths to 0. \n\
223 - CONSTANT DEPTH. Initializes the water depths to the value givenby the key-word INITIAL DEPTH. \n\
224 - SPECIAL. The initial conditions with the water depth should be stated in the CONDIN subroutine. \n\
225 - TPXO SATELITE ALTIMETRY. The initial conditions on the free surface and velocities are established from the TPXO satellite program data,\n the harmonic constituents of which are stored in the TIDE DATA BASE file.', ),
227 # ------------------------------------
228 b_initial_elevation = BLOC (condition = "Initial_Conditions == 'Constant elevation'",
229 # ------------------------------------
230 # ------------------------------------
231 Initial_Elevation = SIMP(statut = 'o',typ = 'R',
232 # ------------------------------------
233 fr = 'Valeur utilisee avec l''option : CONDITIONS INITIALES - COTE CONSTANTE',
234 ang = 'Value to be used with the option : INITIAL CONDITIONS -CONSTANT ELEVATION' ),
235 ) , # fin b_initial_elevation
237 # ------------------------------------
238 b_initial_depth = BLOC (condition = "Initial_Conditions == 'Constant depth'",
239 # ------------------------------------
240 # ------------------------------------
241 Initial_Depth = SIMP(statut = 'o',typ = 'R',
242 # ------------------------------------
243 fr = 'Valeur utilisee avec l''option : CONDITIONS INITIALES :-HAUTEUR CONSTANTE-',
244 ang = 'Value to be used along with the option: INITIAL CONDITIONS -CONSTANT DEPTH-' ),
245 ),# fin b_initial_depth
247 # ------------------------------------
248 b_special = BLOC (condition = "Initial_Conditions == 'Special'",
249 # ------------------------------------
250 # ------------------------------------
251 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
252 # ------------------------------------
253 defaut = "The initial conditions with the water depth should be stated in the CONDIN subroutine"),
256 #PNPN il faut changer la condition pour que cela soit dans maree. il faut une position = global_jdc et remonter # cela
257 # ------------------------------------
258 b_initial_TPXO = BLOC (condition = "Initial_Conditions == 'TPXO satellite altimetry'",
259 # ------------------------------------
260 # ------------------------------------
261 Ascii_Database_For_Tide = SIMP( statut = 'o',
262 # ------------------------------------
263 typ = ('Fichier', 'All Files (*)',),
264 fr = 'Base de donnees de constantes harmoniques tirees du fichier du modele de maree',
265 ang = 'Tide data base of harmonic constituents extracted from the tidal model file',),
266 ), # fin b_initial_TPXO
268 ), # fin Initial_State
271 # ------------------------------------
272 Computation_Continued = SIMP( statut = 'o',typ = bool,defaut = False,position = "global_jdc"),
273 # ------------------------------------
275 # ------------------------------------
276 b_comput_con = BLOC(condition = 'Computation_Continued == True',
277 Computation_Continued_Settings = FACT(statut = 'o',
279 # ------------------------------------
280 Previous_Computation_File_Format = SIMP( statut = 'o',typ = 'TXM',
281 # ------------------------------------
282 into = ['Serafin','MED','SerafinD'],
284 fr = 'Format du fichier de resultats du calcul precedent. Les valeurs possibles sont : \n\
285 - SERAFIN : format standard simple precision pour Telemac; \n\
286 - SERAFIND: format standard double precision pour Telemac; \n\
287 - MED : format MED base sur HDF5',
288 ang = 'Previous computation results file format. Possible values are: \n\
289 - SERAFIN : classical single precision format in Telemac; \n\
290 - SERAFIND: classical double precision format in Telemac; \n\
291 - MED : MED format based on HDF5',),
293 # ------------------------------------
294 Previous_Computation_File = SIMP( statut = 'o',
295 # ------------------------------------
296 typ = ('Fichier', 'Computation File (*.res);;All Files (*)',),
297 fr = "Nom d'un fichier contenant les resultats d'un calcul precedent realise sur le meme maillage \n\
298 et dont le dernier pas de temps enregistre va fournir les conditions initiales pour une suite de de calcul.",
299 ang = 'Name of a file containing the results of an earlier computation which was made on the same mesh.\n\
300 The last recorded time step will provid the initial conditions for the new computation.',
302 # ------------------------------------
303 Initial_Time_Set_To_Zero = SIMP(typ = bool, statut = 'o',
304 # ------------------------------------
305 fr = 'Remet le temps a zero en cas de suite de calcul',
306 ang = 'Initial time set to zero in case of restart',
309 # ------------------------------------
310 Record_Number_For_Restart = SIMP(typ = 'I', statut = 'o', defaut = 0,
311 # ------------------------------------
312 fr = "numero de l'enregistrement de depart dans le fichier du calcul precedent. 0 signifie qu'on prend le dernier enregistrement",
313 ang = "record number to start from in the previous computation file, 0 for last record" ),
316 ),# fin BLOC b_comput_con
318 # ------------------------------------
319 Coupling = FACT( statut = 'o',
320 # ------------------------------------
321 # PNPNPN Attention 1 seul choix possible
322 fr = 'Liste des codes avec lesquels on couple Telemac-2D',
323 ang = 'List of codes to be coupled with Telemac-2D',
325 # ------------------------------------
326 Sisyphe = SIMP(statut = 'o',typ = bool,defaut = False ,
327 # ------------------------------------
328 fr = 'couplage interne avec Sisyphe',
329 ang = 'internal coupling with Sisyphe'),
331 # ------------------------------------
332 Tomawac = SIMP(statut = 'o',typ = bool,defaut = False,
333 # ------------------------------------
334 fr = 'couplage interne avec Tomawac',
335 ang = 'internal coupling with Tomawac'),
337 # ------------------------------------
338 Delwacq = SIMP(statut = 'o',typ = bool,defaut = False,
339 # ------------------------------------
340 fr = 'couplage interne avec Delwacq',
341 ang = 'internal coupling with Delwacq'),
342 # PNPNPN Attention : il faut des mots cles si Delwacq. a voir avec Soizic
347 # ------------------------------------
348 Parallel_Computation = SIMP(statut = 'o',typ = 'TXM',
349 # ------------------------------------
350 # Ce mot clef n existe pas dans le dico
351 into = ['Sequentiel','Parallel'],
352 defaut = 'Sequentiel',),
354 # ------------------------------------
355 b_para = BLOC(condition = 'Parallel_Computation == "Parallel"',
356 # ------------------------------------
357 # ------------------------------------
358 Parallel_Processors = SIMP(statut = 'o',typ = 'I',
359 # ------------------------------------
360 val_min = 0,defaut = 1,
361 fr = 'NOMBRE DE PROCESSEURS EN CALCUL PARALLELE \n\
362 0 : 1 machine, compilation sans bibliotheque de parallelisme \n\
363 1 : 1 machine, compilation avec bibliotheque de parallelisme \n\
364 2 : 2 processeurs ou machines en parallele etc... ',
365 ang = 'NUMBER OF PROCESSORS FOR PARALLEL PROCESSING \n\
366 0 : 1 machine, compiling without parallel library \n\
367 1 : 1 machine, compiling with a parallel library \n\
368 2 : 2 processors or machines in parallel'),
373 # -----------------------------------------------------------------------
374 TIDE_PARAMETERS = PROC(nom = "TIDE_PARAMETERS",op = None,
375 # -----------------------------------------------------------------------
376 # ------------------------------------
377 Inputs_Outputs_For_Tide = FACT( statut = 'o',
378 # ------------------------------------
380 # ------------------------------------
381 Harmonic_Constants_File = SIMP( statut = 'o',
382 # ------------------------------------
383 typ = ('Fichier', 'All Files (*)',),
384 fr = 'Constantes harmoniques extraites du fichier du modele de maree',
385 ang = 'Harmonic constants extracted from the tidalmodel file',),
387 # ------------------------------------
388 Tidal_Model_File = SIMP( statut = 'o',
389 # ------------------------------------
390 typ = ('Fichier', 'All Files (*)',),
391 fr = 'Fichier de geometrie du modele dont sont extraites les constantes harmoniques',
392 ang = 'Geometry file of the model from which harmonic constituents are extracted',),
394 ), # Fin Inputs_Outputs_For_Tide
396 # ------------------------------------
397 Location = FACT( statut = 'o',
398 # ------------------------------------
399 # ------------------------------------
400 Geographic_System = SIMP(statut = 'o',typ = 'TXM',
401 # ------------------------------------
402 into = ["Defined by user", "WGS84 longitude/latitude in real degrees", "WGS84 nothern UTM",\
403 "WGS84 southern UTM","Lambert", "Mercator",],
404 defaut = "Defined by user",
405 fr = 'Systeme de coordonnees geographiques dans lequel est construit le modele numerique.',
406 ang = 'Geographic coordinates system in which the numerical model is built.',),
408 # ------------------------------------
409 b_geo_plan = BLOC(condition = "Geographic_System in ['WGS84 nothern UTM','WGS84 southern UTM','Lambert']",
410 # ------------------------------------
412 # ------------------------------------
413 Zone_Number_In_Geographic_System = SIMP(statut = 'f',typ = 'TXM',
414 # ------------------------------------
415 into = [ 'Lambert 1 north', 'Lambert 2 center', 'Lambert 3 south', \
416 'Lambert 4 corsica', 'Lambert 2 extended', 'UTM zone,E.G.'],
417 fr = "Numero de zone (fuseau ou type de projection) lors de l'utilisation d'une projection plane.\n \
418 Indiquer le systeme geographique dans lequel est construit le modele numerique avec le mot-cle SYSTEME GEOGRAPHIQUE",
419 ang = 'Number of zone when using a plane projection. \n\
420 Indicate the geographic system in which the numerical model is built with the keyword GEOGRAPHIC SYSTEM'),
424 # ------------------------------------
425 Physical_Parameters = FACT(statut = 'o',
426 # ------------------------------------
428 # ------------------------------------
429 Tide_Generating_Force = SIMP(statut = 'o',
430 # ------------------------------------
431 typ = bool, defaut = False),
433 # ------------------------------------
434 b_Tide = BLOC(condition = "Tide_Generating_Force == True",
435 # ------------------------------------
436 # ------------------------------------
437 Longitude_Of_Origin_Point = SIMP(typ = 'R',
438 # ------------------------------------
439 statut = 'o', defaut = 48.,
440 fr = 'Fixe la valeur de la longitude du point origine du modele, lors de l utilisation de la force generatrice de la maree.',
441 ang = 'Give the value of the longitude of the origin point of the model, when taking into account of the tide generator force.',),
443 # ------------------------------------
444 Tidal_Data_Base = SIMP(statut = 'o',typ = 'TXM',
445 # ------------------------------------
446 # Soizic . Il faudrait une consigne ? avec des blocs ?
447 # en suspens pour JMJ
448 into = [ "JMJ", "TPXO", "Miscellaneous (LEGOS-NEA, FES20XX, PREVIMER...)",],
449 fr = 'Pour JMJ, renseigner la localisation du fichier bdd_jmj et geofin dans les mots-cles BASE DE DONNEES DE MAREE \n\
450 et FICHIER DU MODELE DE MAREE. Pour TPXO, LEGOS-NEA, FES20XX et PREVIMER, l utilisateur doit telecharger les fichiers \n\
451 de constantes harmoniques sur internet',
452 ang = 'For JMJ, indicate the location of the files bdd_jmj and geofin with keywords TIDE DATA BASE and TIDAL MODEL FILE.\n\
453 For TPXO, LEGOS-NEA, FES20XX and PREVIMER, the user has to download files of harmonic constituents on the internet',),
455 # ------------------------------------
456 b_tpxo = BLOC(condition = "Tidal_Data_Base == 'TPXO'",
457 # ------------------------------------
459 # ------------------------------------
460 Minor_Constituents_Inference = SIMP( statut = 'o',typ = bool,
461 # ------------------------------------
463 fr = 'Interpolation de composantes harmoniques mineures a partir de celles lues dans les \n\
464 fichiers d entrees lies aux mots-cles BASE BINAIRE 1 DE DONNEES DE MAREE et BASE BINAIRE 2 DE DONNEES DE MAREE',
465 ang = 'Inference of minor constituents from the one read in input files linked to \n\
466 keywords BINARY DATABASE 1 FOR TIDE and BINARY DATABASE 2 FOR TIDE',),
470 # ------------------------------------
471 Binary_Database_1_For_Tide = SIMP( statut = 'o',
472 # ------------------------------------
473 typ = ('Fichier', '(All Files (*),)',),
474 fr = 'Base de donnees binaire 1 tiree du fichier du modele de maree.\n\
475 Dans le cas des donnees satellitaires de TPXO, ce fichier correspond aux donnees de niveau d''eau, par exemple h_tpxo7.2',
476 ang = 'Binary database 1 extracted from the tidal model file.\n\
477 In the case of the TPXO satellite altimetry model, this file should be for free surface level, for instance h_tpxo7.2',),
479 # ------------------------------------
480 Binary_Database_2_For_Tide = SIMP( statut = 'o',
481 # ------------------------------------
482 typ = ('Fichier', '(All Files (*),)',),
483 fr= 'Base de donnees binaire 2 tiree du fichier du modele de maree.\n\
484 Dans le cas des donnees satellitaires de TPXO, ce fichier correspond aux donnees de vitesse de marrees, par exemple u_tpxo7.2',
485 ang = 'Binary database 2 extracted from the tidal model file.\n\
486 In the case of the TPXO satellite altimetry model, this file should be for tidal velocities, for instance u_tpxo7.2' ),
488 ),#fin du bloc b_tpxo
489 ), # Fin du Bloc b_Tide
491 # ------------------------------------
492 Option_For_Tidal_Boundary_Conditions = SIMP( statut = 'o',
493 # ------------------------------------
494 typ = 'TXM', defaut = 'No tide',
495 into = ['No tide', 'Real tide (recommended methodology)', 'Astronomical tide', \
496 'Mean spring tide', 'Mean tide', 'Mean neap tide', \
497 'Astronomical neap tide', 'Real tide (methodology before 2010)'],),
499 # ------------------------------------
500 b_Option_B = BLOC(condition = 'Option_For_Tidal_Boundary_Conditions!= "No tide"',
501 # ------------------------------------
502 # ------------------------------------
503 Coefficient_To_Calibrate_Tidal_Range = SIMP(statut = 'o',
504 # ------------------------------------
505 typ = 'R', defaut = 1.,
506 fr = 'Coefficient pour ajuster le marnage de l''onde de maree aux frontieres maritimes',
507 ang = 'Coefficient to calibrate the tidal range of tidal wave at tidal open boundary conditions'),
509 # ------------------------------------
510 Coefficient_To_Calibrate_Tidal_Velocities = SIMP(statut = 'o',
511 # ------------------------------------
512 typ = 'R', defaut = 999999,
513 fr = 'Coefficient pour ajuster les composantes de vitesse de l''onde de maree aux frontieres maritimes.\n\
514 La valeur par defaut 999999. signifie que c''est la racine carree du Coefficient_De_Calage_Du_Marnage qui est prise',
515 ang = 'Coefficient to calibrate the tidal velocities of tidal wave at tidal open boundary conditions.\n\
516 Default value 999999. means that the square root of Coefficient_To_Calibrate_Tidal_Range is taken'),
518 # ------------------------------------
519 Coefficient_To_Calibrate_Sea_Level = SIMP(statut = 'o',typ = 'R',
520 # ------------------------------------
522 fr = 'Coefficient pour ajuster le niveau de mer',
523 ang = 'Coefficient to calibrate the sea level'),
526 ), #fin Physical_Parameters
527 ) # Fin TIDE_PARAMETERS
529 # -----------------------------------------------------------------------
530 BOUNDARY_CONDITIONS = PROC(nom = "BOUNDARY_CONDITIONS",op = None,
531 # -----------------------------------------------------------------------
532 fr = 'On donne un ensemble de conditions par frontiere liquide',
533 ang = 'One condition set per liquid boundary is given',
534 UIinfo = { "groupes" : ( "CACHE", )},
535 #UIinfo = { "groupes" : ( "iiii", )},
536 # Dans l ideal il faut aller regarder selon les groupes dans le fichier med
537 # en sortie il faut aller chercher le .cli qui va bien
538 #Liquid_Boundaries = FACT(statut = 'f',max = '**',
539 # Options = SIMP(statut = 'f',typ = 'I',into = ['classical boundary conditions','Thompson method based on characteristics'])
540 # Prescribed_Flowrates = SIMP(statut = 'f',typ = 'R'),
541 # Prescribed_Elevations = SIMP(statut = 'f',typ = 'R'),
542 # Prescribed_Velocity = SIMP(statut = 'f',typ = 'R'),
545 # Il va falloir une "traduction dans le langage du dico"
546 # Il faut seulement l un des 3
548 # ------------------------------------
549 Liquid_Boundaries = FACT(statut = 'o',max = '**',
550 # ------------------------------------
552 # ------------------------------------
553 Options = SIMP(statut = 'f',typ = 'I',
554 # ------------------------------------
555 into = ['Classical boundary conditions','Thompson method based on characteristics'],
556 fr = 'On donne 1 entier par frontiere liquide',
557 ang = 'One integer per liquid boundary is given',),
559 # ------------------------------------
560 Type_Condition = SIMP(statut = 'o',typ = 'TXM',
561 # On ajoute le type pour rendre l 'ihm plus lisible
562 # mais ce mot-cle n existe pas dans le dico
563 # ------------------------------------
564 into = ['Prescribed Flowrates', 'Prescribed Elevations', 'Prescribed Velocity'],),
566 # ------------------------------------
567 b_Flowrates = BLOC (condition = "Type_Condition == 'Prescribed Flowrates'",
568 # ------------------------------------
569 # ------------------------------------
570 Prescribed_Flowrates = SIMP(statut = 'o',
571 # ------------------------------------
573 fr = ' Valeurs des debits imposes aux frontieres liquides entrantes.\n\
574 Lire la partie du mode d''emploi consacree aux conditions aux limites',
575 ang = 'Values of prescribed flowrates at the inflow boundaries.\n\
576 The section about boundary conditions is to be read in the manual'),
579 # ------------------------------------
580 b_Elevations = BLOC (condition = "Type_Condition == 'Prescribed Elevations'",
581 # ------------------------------------
582 # ------------------------------------
583 Prescribed_Elevations = SIMP(statut = 'o',typ = 'R',
584 # ------------------------------------
585 fr = 'Valeurs des cotes imposees aux frontieres liquides entrantes.\n\
586 Lire la partie du mode d''emploi consacree aux conditions aux limites',
587 ang = 'Values of prescribed elevations at the inflow boundaries.\n\
588 The section about boundary conditions is to be read in the manual'),
589 ), # fin b_Elevations
591 # ------------------------------------
592 b_Velocity = BLOC (condition = "Type_Condition == 'Prescribed Velocity'",
593 # ------------------------------------
594 # ------------------------------------
595 Prescribed_Velocities = SIMP(statut = 'o',typ = 'R',
596 # ------------------------------------
597 fr = 'Valeurs des vitesses imposees aux frontieres liquides entrantes.\n\
598 Lire la partie du mode d''emploi consacree aux conditions aux limites',
599 ang = 'Values of prescribed velocities at the liquid inflow boundaries.\n\
600 Refer to the section dealing with the boundary conditions'),
603 ), # fin des Liquid_Boundaries
605 # ------------------------------------
606 Liquid_Boundaries_File = SIMP( statut = 'f',
607 # ------------------------------------
608 typ = ('Fichier', 'All Files (*)',),
609 fr = 'Fichier de variations en temps des conditions aux limites.\n\
610 Les donnees de ce fichier seront a lire sur le canal 12.',
611 ang = 'Variations in time of boundary conditions. Data of this file are read on channel 12.',
615 #PNPN Attention dans le Dico STAGE-DISCHARGE CURVES
616 #PNPN regarder le document de reference pour changer non programme
617 # ------------------------------------
618 Stage_Discharge_Curves = SIMP(statut = 'f',typ = 'TXM',
619 # ------------------------------------
620 into = ["No one","Z(Q)","Q(Z)"],
621 fr = 'Indique si une courbe de tarage doit etre utilisee pour une frontiere',
622 ang = 'Says if a discharge-elevation curve must be used for a given boundary',),
624 # ------------------------------------
625 b_discharge_curve = BLOC (condition = "Stage_Discharge_Curves != 'no'",
626 # ------------------------------------
627 # ------------------------------------
628 Stage_Discharge_Curves_File = SIMP( statut = 'f',
629 # ------------------------------------
630 typ = ('Fichier', 'All Files (*)',),
631 fr = 'Nom du fichier contenant les courbes de tarage',
632 ang = 'Name of the file containing stage-discharge curves',),
633 ), # fin b_discharge_curve
635 # ------------------------------------
636 Elements_Masked_By_User = SIMP(statut = 'o',typ = bool,
637 # ------------------------------------
639 fr = 'Si oui remplir le sous-programme maskob',
640 ang = 'if yes rewrite subroutine maskob',),
642 # ------------------------------------
643 maskob = BLOC (condition = 'Elements_Masked_By_User == True',
644 # ------------------------------------
645 # ------------------------------------
646 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
647 # ------------------------------------
648 defaut = "Remplir le sous-programme maskob"),
651 ) # fin Boundary_Conditions
653 # -----------------------------------------------------------------------
654 NUMERICAL_PARAMETERS = PROC(nom = "NUMERICAL_PARAMETERS",op = None,
655 # -----------------------------------------------------------------------
657 UIinfo = { "groupes" : ( "CACHE", )},
658 #UIinfo = { "groupes" : ( "iiii", )},
660 # ------------------------------------
661 Equations = SIMP(statut = 'o',typ = 'TXM',
662 # ------------------------------------
663 into = ['Saint-Venant EF','Saint-Venant VF','Boussinesq'],
664 defaut = 'Saint-Venant EF',
665 fr = 'Choix des equations a resoudre',
666 ang = 'Choice of equations to solve',),
668 # ------------------------------------
669 Treatment_Of_The_Linear_System = SIMP(statut = 'o', typ = 'TXM',
670 # ------------------------------------
671 into = ["Coupled", "Wave equation"],
672 defaut = "Coupled",),
674 # ------------------------------------
675 Finite_Volume_Scheme = SIMP( statut = 'o',typ = 'TXM',
676 # ------------------------------------
677 into = [ "Roe scheme", "Kinetic order 1", "Kinetic order 2", "Zokagoa scheme order 1",\
678 "Tchamen scheme order 1", "HLLC scheme order 1", "WAF scheme order 2"],
679 defaut = "Kinetic order 1",),
681 # ------------------------------------
682 Solver_Definition = FACT(statut = 'o',
683 # ------------------------------------
685 # ------------------------------------
686 Solver = SIMP(statut = 'o',typ = 'TXM',
687 # ------------------------------------
688 into = ["Conjugate gradient", "Conjugate residual","Conjugate gradient on a normal equation",\
689 "Minimum error", "CGSTAB", "GMRES", "Direct",],
690 fr = 'Permet de choisir le solveur utilise pour la resolution de l''etape de propagation. \n\
691 Toutes les methodes proposees actuellement s''apparentent au Gradient Conjugue. Ce sont :\n\
692 1 : gradient conjugue 2 : residu conjugue 3 : gradient conjugue sur equation normale \n\
693 4 : erreur minimale 5 : gradient conjugue carre (non programme) 6 : gradient conjugue carre stabilise (cgstab)\n\
694 7 : gmres (voir aussi option du solveur) 8 : direct',
695 ang = 'Makes it possible to select the solver used for solving the propagation step.\n\
696 All the currently available methods are variations of the Conjugate Gradient method. They are as follows: \n\
697 1: conjugate gradient 2: conjugate residual 3: conjugate gradient on a normal equation\n\
698 4: minimum error 5: conjugate gradient squared (not implemented) 6: conjugate gradient squared stabilised (cgstab) \n\
699 7: gmres (see option for solver) 8: direct',),
701 # ------------------------------------
702 b_gmres = BLOC (condition = "Solver == 'GMRES'",
703 # ------------------------------------
704 # ------------------------------------
705 Solver_Option = SIMP(statut = 'o',typ = 'I', defaut = 2, val_min = 2,val_max = 15,
706 # ------------------------------------
707 fr = 'la dimension de l''espace de KRILOV',
708 ang = 'dimension of the KRYLOV space',),
711 # ------------------------------------
712 Solver_Accuracy = SIMP(statut = 'o',typ = 'R', defaut = 1e-4,
713 # ------------------------------------
714 fr = 'Precision demandee pour la resolution de l''etape de propagation (cf. Note de principe).',
715 ang = 'Required accuracy for solving the propagation step (refer to Principle note).',),
717 # ------------------------------------
718 Maximum_Number_Of_Iterations_For_Solver = SIMP(statut = 'o',typ = 'I', defaut = 100,
719 # ------------------------------------
720 fr = 'Les algorithmes utilises pour la resolution de l''etape de propagation etant iteratifs, \n\
721 il est necessaire de limiter le nombre d''iterations autorisees.\n\
722 Remarque : un maximum de 40 iterations par pas de temps semble raisonnable.',
723 ang = 'Since the algorithms used for solving the propagation step are iterative, \
724 the allowed number of iterations should be limited.\n\
725 Note: a maximum number of 40 iterations per time step seems to be reasonable.',),
729 # ------------------------------------
730 Linearity = FACT(statut = 'f',
731 # ------------------------------------
732 # ------------------------------------
733 Continuity_Correction = SIMP(typ = bool, statut = 'o',
734 # ------------------------------------
736 fr = 'Corrige les vitesses sur les points avec hauteur imposee ou l equation de continuite n a pas ete resolue',
737 ang = 'Correction of the velocities on points with a prescribed elevation, where the continuity equation has not been solved',),
741 # ------------------------------------
742 Precondionning_setting = FACT(statut = 'f',
743 # ------------------------------------
745 # ------------------------------------
746 Preconditioning = SIMP(statut = 'o',typ = 'TXM',max="**",
747 # ------------------------------------
748 # PNPN Soizic ? Est ce que c'est une liste
749 # Comment fait-on le into est faux : voir l aide
750 # PN Je propose qu 'on puisse faire +sieurs choix et qu on recalcule en sortie
751 # ou on propose des choix croisés parce que toutes les combinaisons ne sont pas possibles ?
753 into = [ "Diagonal", "No preconditioning", "Diagonal condensee", "Crout", "Gauss-Seidel", ],
754 defaut=("Diagonal",), homo="SansOrdreNiDoublon",
755 fr='Permet de preconditionner le systeme de l etape de propagation afin d accelerer la convergence \n\
756 lors de sa resolution. Certains preconditionnements sont cumulables : (les diagonaux 2 ou 3 avec les autres)\n\
757 Pour cette raison on ne retient que les nombres premiers pour designer les preconditionnements. Si l on souhaite en cumuler\n\
758 plusieurs on formera le produit des options correspondantes.',
759 ang='Choice of the preconditioning in the propagation step linear system that the convergence is speeded up\n\
760 when it is being solved.Some operations (either 2 or 3 diagonal preconditioning) can be performed concurrently with the others.\n\
761 Only prime numbers are therefore kept to denote the preconditioning operations. When several of them are to be performed concurrently,\n\
762 the product of relevant options shall be made.',
764 # ------------------------------------
765 C_U_Preconditioning = SIMP(typ = bool, statut = 'o', defaut=False,
766 # ------------------------------------
767 fr = 'Changement de variable de H en C dans le systeme lineaire final',
768 ang = 'Change of variable from H to C in the final linear system'
771 ),# fin Preconditionnement
773 # ------------------------------------
774 Matrix_Informations = FACT(statut = 'f',
775 # ------------------------------------
776 # ------------------------------------
777 Matrix_Vector_Product = SIMP(statut = 'o',typ = 'TXM',
778 # ------------------------------------
779 into = ["Classic", "Frontal"],
781 fr = 'attention, si frontal, il faut une numerotation speciale des points',
782 ang = 'beware, with option 2, a special numbering of points is required',
784 # ------------------------------------
785 Matrix_Storage = SIMP(statut = 'o',typ = 'TXM',
786 # ------------------------------------
787 into = ["Classical EBE","Edge-based storage",],
788 defaut='Edge-based storage',
790 ),# fin Matrix_Informations
793 # ------------------------------------
794 Advection = FACT(statut = 'o',
795 # ------------------------------------
797 # ------------------------------------
798 Type_Of_Advection = FACT(statut = 'o',
799 # ------------------------------------
802 # Tres differents du dico liste de 4
803 # PNPN eclaircir les choix SVP
804 # soizic. choix 3 et 4 et 13 et 14
805 # Attention recalcul de Type_Of_Advection
806 # ------------------------------------
807 Advection_Of_U_And_V = SIMP(statut = 'o',typ = bool, defaut = True,
808 # ------------------------------------
809 fr = 'Prise en compte ou non de la convection de U et V.',
810 ang = 'The advection of U and V is taken into account or ignored.'),
812 # ------------------------------------
813 b_u_v = BLOC( condition = "Advection_Of_U_And_V == True",
814 # ------------------------------------
815 # ------------------------------------
816 Type_Of_Advection_U_And_V = SIMP(statut = 'o',typ = 'TXM',position = "global",
817 # ------------------------------------
818 into = ["Characteristics", "SUPG", "Conservative N-scheme", 'Conservative N-scheme',\
819 'Conservative PSI-scheme', 'Non conservative PSI scheme', 'Implicit non conservative N scheme',\
820 'Edge-based N-scheme'],
821 defaut = "Characteristics", ),
823 # ------------------------------------
824 b_upwind = BLOC(condition = "Type_Of_Advection_U_And_V == 'SUPG'",
825 # ------------------------------------
826 # ------------------------------------
827 Supg_Option_U_And_V = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
828 # ------------------------------------
829 into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
831 # ------------------------------------
832 Upwind_Coefficients_Of_U_And_V = SIMP(statut = 'o',typ = 'R', defaut = 1.)
833 # ------------------------------------
837 # ------------------------------------
838 Advection_Of_H = SIMP(statut = 'o',typ = bool, defaut = True,
839 # ------------------------------------
840 fr = 'Prise en compte ou non de la convection de H.',
841 ang = 'The advection of H is taken into account or ignored.'),
843 # ------------------------------------
844 b_h = BLOC( condition = "Advection_Of_H == True",
845 # ------------------------------------
846 # ------------------------------------
847 Type_Of_Advection_H = SIMP(statut = 'o',typ = 'TXM',position = "global",
848 # ------------------------------------
849 into = ["characteristics", "SUPG", "conservative N-scheme", 'conservative N-scheme',\
850 'conservative PSI-scheme', 'non conservative PSI scheme', 'implicit non conservative N scheme',\
851 'edge-based N-scheme'],
852 defaut = "conservative PSI-scheme",),
853 # ------------------------------------
854 b_upwind_H = BLOC(condition = "Type_Of_Advection_H == 'SUPG'",
855 # ------------------------------------
856 # ------------------------------------
857 Supg_Option_H = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
858 # ------------------------------------
859 into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
861 # ------------------------------------
862 Upwind_Coefficients_Of_H = SIMP(statut = 'o',typ = 'R', defaut = 1.)
863 # ------------------------------------
867 # ------------------------------------
868 Advection_Of_K_And_Epsilon = SIMP(statut = 'o',typ = bool, defaut = True,
869 # ------------------------------------
870 fr = 'Prise en compte ou non de la convection de Tracer.',
871 ang = 'The advection of Tracer is taken into account or ignored.'),
873 # ------------------------------------
874 b_k = BLOC( condition = "Advection_Of_K_And_Epsilon == True",
875 # ------------------------------------
876 # ------------------------------------
877 Type_Of_Advection_K_And_Epsilon = SIMP(statut = 'o',typ = 'TXM',position = "global",
878 # ------------------------------------
879 into = ["Characteristics", "SUPG", "Conservative N-scheme", 'Conservative N-scheme',\
880 'Conservative PSI-scheme', 'Non conservative PSI scheme', 'Implicit non conservative N scheme',\
881 'Edge-based N-scheme'],
882 defaut = "Characteristics",),
883 # ------------------------------------
884 b_upwind_k = BLOC(condition = "Type_Of_Advection_K_And_Epsilon == 'SUPG'",
885 # ------------------------------------
886 # ------------------------------------
887 Supg_Option_Tracers = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
888 # ------------------------------------
889 into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
891 # ------------------------------------
892 Upwind_Coefficients_Of_K_And_Epsilon = SIMP(statut = 'o',typ = 'R', defaut = 1.)
893 # ------------------------------------
897 # ------------------------------------
898 Advection_Of_Tracers = SIMP(statut = 'o',typ = bool, defaut = True,
899 # ------------------------------------
900 fr = 'Prise en compte ou non de la convection de Tracer.',
901 ang = 'The advection of Tracer is taken into account or ignored.'),
903 # ------------------------------------
904 b_tracers = BLOC( condition = "Advection_Of_Tracers == True",
905 # ------------------------------------
906 # ------------------------------------
907 Type_Of_Advection_Tracers = SIMP(statut = 'o',typ = 'TXM',position = "global",
908 # ------------------------------------
909 into = ["Characteristics", "SUPG", "Conservative N-scheme", 'Conservative N-scheme',\
910 'Conservative PSI-scheme', 'Non conservative PSI scheme', 'Implicit non conservative N scheme',\
911 'Edge-based N-scheme'],),
912 # ------------------------------------
913 b_upwind_Tracers = BLOC(condition = "Type_Of_Advection_Tracers == 'SUPG'",
914 # ------------------------------------
915 # ------------------------------------
916 Supg_Option_K_And_Epsilon = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
917 # ------------------------------------
918 into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
920 # ------------------------------------
921 Upwind_Coefficients_Of_Tracers = SIMP(statut = 'o',typ = 'R', defaut = 1.)
922 # ------------------------------------
923 ), # fin b_upwind_Tracers
926 # ------------------------------------
927 b_max = BLOC( condition = "(Advection_Of_Tracers == True and Type_Of_Advection_Tracers == 'Edge-based N-scheme') or (Advection_Of_K_And_Epsilon == True and Type_Of_Advection_K_And_Epsilon == 'Edge-based N-scheme') or (Advection_Of_U_And_V == True and Type_Of_Advection_U_And_V == 'Edge-based N-scheme') or ( Advection_Of_H == True and Type_Of_Advection_H == 'Edge-based N-scheme')",
928 # ------------------------------------
929 # ------------------------------------
930 Maximum_Number_Of_Iterations_For_Advection_Schemes = SIMP( statut = 'o',typ = 'I', defaut = 10 ,
931 # ------------------------------------
932 fr = 'Seulement pour schemes Edge-based N-scheme',
933 ang = 'Only for Edge-based N-scheme',),
936 # ------------------------------------
937 b_traitement = BLOC( condition = "(Advection_Of_Tracers == True and Type_Of_Advection_Tracers in ['Edge-based N-scheme','SUPG','Conservative N-scheme','Conservative PSI-scheme']) or (Advection_Of_K_And_Epsilon == True and Type_Of_Advection_K_And_Epsilon in ['Edge-based N-scheme','SUPG','Conservative N-scheme','Conservative PSI-scheme']) or (Advection_Of_U_And_V == True and Type_Of_Advection_U_And_V in ['Edge-based N-scheme','SUPG','Conservative N-scheme','Conservative PSI-scheme']) or ( Advection_Of_H == True and Type_Of_Advection_H in ['Edge-based N-scheme','SUPG','Conservative N-scheme','Conservative PSI-scheme'])",
938 # ------------------------------------
940 # ------------------------------------
941 Treatment_Of_Fluxes_At_The_Boundaries = SIMP( statut = 'o',typ = 'TXM',
942 # ------------------------------------
943 into = ["Priority to prescribed values","Priority to fluxes"],
944 fr = 'Utilise pour les schemas SUPG, PSI et N, \n\
945 si Priorité aux flux, on ne retrouve pas exactement les valeurs imposees des traceurs,mais le flux est correct',
946 ang = 'Used so far only with the SUPG, PSI and N schemes.\n\
947 if Priority to fluxes, Dirichlet prescribed values are not obeyed,but the fluxes are correct',),
949 ), # fin b_traitement
950 ), # Fin Type_Of_Advection
954 # recalculer la liste de 4
955 # Attention bloc selon le type de convection
956 # ------------------------------------
957 # SUPG = FACT(statut = 'o',
958 # ------------------------------------
959 # ------------------------------------
960 # Supg_Option_U_And_V = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
961 # ------------------------------------
962 # into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
963 # ------------------------------------
964 # Supg_Option_H = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
965 # ------------------------------------
966 # into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
967 # ------------------------------------
968 # Supg_Option_Tracers = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
969 # ------------------------------------
970 # into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
971 # ------------------------------------
972 # Supg_Option_K_And_Epsilon = SIMP(statut = 'o', defaut = 'Modified SUPG', typ = 'TXM',
973 # ------------------------------------
974 # into = ['No upwinding', 'Classical SUPG','Modified SUPG']),
977 # ------------------------------------
978 Mass_Lumping_On_H = SIMP(statut = 'o',typ = 'R', defaut = 0,
979 # ------------------------------------
980 fr = 'TELEMAC offre la possibilite d''effectuer du mass-lumping sur H ou U.\n\
981 Ceci revient a ramener tout ou partie (suivant la valeur de ce coefficient) des matrices AM1 (h) ou AM2 (U) \n\
982 et AM3 (V) sur leur diagonale. Cette technique permet d''accelerer le code dans des proportions tres\n\
983 importantes et de le rendre egalement beaucoup plus stable. Cependant les solutions obtenues se trouvent lissees.\n\
984 Ce parametre fixe le taux de mass-lumping effectue sur h.',
985 ang = 'TELEMAC provides an opportunity to carry out mass-lumping either on C,H or on the velocity. \n\
986 This is equivalent to bringing the matrices AM1(h) or AM2(U) and AM3(V) wholly or partly, back onto their diagonal.\n\
987 Thanks to that technique, the code can be speeded up to a quite significant extent and it can also be made much \n\
988 more stable. The resulting solutions, however, become artificially smoothed. \n\
989 This parameter sets the extent of mass-lumping that is performed on h.'),
991 # ------------------------------------
992 Mass_Lumping_On_Velocity = SIMP(statut = 'o', typ = 'R', defaut = 0,
993 # ------------------------------------
994 fr = 'Fixe le taux de mass-lumping effectue sur la vitesse.',
995 ang = 'Sets the amount of mass-lumping that is performed on the velocity.'),
997 # ------------------------------------
998 Mass_Lumping_For_Weak_Characteristics = SIMP(statut = 'o',typ = 'R',defaut = 0,
999 # ------------------------------------
1000 fr = 'Applique a la matrice de masse',
1001 ang = 'To be applied to the mass matrix',),
1002 # ------------------------------------
1003 Free_Surface_Gradient_Compatibility = SIMP(statut = 'o',typ = 'R',defaut = 1.,
1004 # ------------------------------------
1005 fr = 'Des valeurs inferieures a 1 suppriment les oscillations parasites',
1006 ang = 'Values less than 1 suppress spurious oscillations'),
1008 # ------------------------------------
1009 Number_Of_Sub_Iterations_For_Non_Linearities = SIMP(statut = 'o',typ = 'I',
1010 # ------------------------------------
1012 fr = 'Permet de reactualiser, pour un meme pas de temps, les champs convecteur et propagateur \n\
1013 au cours de plusieurs sous-iterations.\n\
1014 A la premiere sous-iteration, ces champs sont donnes par C et le champ de vitesses au pas de temps precedent.\n\
1015 Aux iterations suivantes, ils sont pris egaux au champ de vitesse obtenu a la fin de la sous-iteration precedente. \n\
1016 Cette technique permet d''ameliorer la prise en compte des non linearites.',
1017 ang = 'Used for updating, within one time step, the advection and propagation field.\n\
1018 upon the first sub-iteration, \n\
1019 these fields are given by C and the velocity field in the previous time step. At subsequent iterations, \n\
1020 the results of the previous sub-iteration is used to update the advection and propagation field.\n\
1021 The non-linearities can be taken into account through this technique.',),
1026 #PNPNPN Il faut recalculer le MCSIMP Propagation
1027 # ------------------------------------
1028 Propagation = FACT(statut = 'o',
1029 # ------------------------------------
1030 # ------------------------------------
1031 Initial_Guess_For_H = SIMP(statut = 'o',typ = 'TXM',
1032 # ------------------------------------
1033 into = ['Zero', 'Previous', 'Extrapolation'],
1034 defaut = 'Previous',
1035 fr = 'Tir initial du solveur de l etape de propagation. Offre la possibilite de modifier la valeur initiale de DH,\n\
1036 accroissement de H, a chaque iteration, dans l etape de propagation en utilisant les valeurs finales de cette variable \n\
1037 aux pas de temps precedents. Ceci peut permettre daccelerer la vitesse de convergence lors de la resolution du systeme.',
1038 ang = 'Initial guess for the solver in the propagation step. Makes it possible to modify the initial value of H, \n\
1039 upon each iteration in the propagation step, by using the ultimate values this variable had in the earlier time steps.\n\
1040 Thus, the convergence can be speeded up when the system is being solved.',),
1043 # ------------------------------------
1044 Linearized_Propagation = SIMP(statut = 'o',typ = bool,defaut = False,
1045 # ------------------------------------
1046 fr = 'Permet de lineariser l''etape de propagation; \n\
1047 par exemple lors de la realisation de cas tests pour lesquels on dispose d une solution analytique dans le cas linearise.',
1048 ang = 'Provided for linearizing the propagation step; \n\
1049 e.g. when performing test-cases for which an analytical solution in the linearized case is available.' ),
1051 # ------------------------------------
1052 b_linear = BLOC(condition = "Linearized_Propagation == True ",
1053 # ------------------------------------
1054 # ------------------------------------
1055 Mean_Depth_For_Linearization = SIMP(statut = 'o',typ = 'R', defaut = 0.0, val_min = 0,
1056 # ------------------------------------
1057 fr = 'Fixe la hauteur d eau autour de laquelle s effectue la linearisation lorsque l option PROPAGATION LINEARISEE est choisie.',
1058 ang = 'Sets the water depth about which the linearization is made when the LINEARIZED PROPAGATION OPTION is selected.'),
1060 # ------------------------------------
1061 Initial_Guess_For_U = SIMP(statut = 'o',typ = 'TXM',
1062 # ------------------------------------
1063 into = ['Zero', 'Previous', 'Extrapolation'],
1064 defaut = 'Previous',
1065 fr = 'Tir initial du solveur de l etape de propagation. Offre la possibilite de modifier la valeur initiale de DH,\n\
1066 accroissement de U, a chaque iteration, dans l etape de propagation en utilisant les valeurs finales de cette variable \n\
1067 aux pas de temps precedents. Ceci peut permettre daccelerer la vitesse de convergence lors de la resolution du systeme.',
1068 ang = 'Initial guess for the solver in the propagation step. Makes it possible to modify the initial value of U, \n\
1069 upon each iteration in the propagation step, by using the ultimate values this variable had in the earlier time steps.\n\
1070 Thus, the convergence can be speeded up when the system is being solved.',),
1074 ), # fin Propagation
1077 # ------------------------------------
1078 Diffusion = FACT(statut = 'o',
1079 # ------------------------------------
1081 # ------------------------------------
1082 Diffusion_Of_Velocity = SIMP( statut='o',typ=bool,
1083 # ------------------------------------
1085 fr = 'Permet de decider si lon prend ou non en compte la diffusion des vitesses.',
1086 ang= 'Makes it possible to decide whether the diffusion of velocity (i.e. viscosity) is taken into account or not.',
1088 # ------------------------------------
1089 b_Diffu = BLOC(condition = 'Diffusion_Of_Velocity == True',
1090 # ------------------------------------
1091 # ------------------------------------
1092 Implicitation_For_Diffusion_Of_Velocity = SIMP(statut = 'o',typ = 'R',defaut = 0,
1093 # ------------------------------------
1094 fr = 'Fixe la valeur du coefficient d''implicitation sur les termes de diffusion des vitesses',
1095 ang = 'Sets the value of the implicitation coefficient for the diffusion of velocity',),
1097 # ------------------------------------
1098 Option_For_The_Diffusion_Of_Velocities = SIMP( statut='o',typ='TXM',
1099 # ------------------------------------
1101 into=['Diffusion in the form div( nu grad(U))','Diffusion in the form 1/h div ( h nu grad(U) )'],
1102 fr = '1: Diffusion de la forme div( nu grad(U) ) 2: Diffusion de la forme 1/h div ( h nu grad(U) )',
1103 ang= '1: Diffusion in the form div( nu grad(U) ) 2: Diffusion in the form 1/h div ( h nu grad(U) )',),
1107 # ------------------------------------
1108 Discretization_Implicitation = FACT(statut = 'f',
1109 # ------------------------------------
1111 # ------------------------------------
1112 Discretizations_In_Space = SIMP(statut = 'o',typ = 'TXM',
1113 # ------------------------------------
1114 into = ["Linear", "Quasi-bubble", "Quadratic"],
1115 defaut = "Linear",),
1117 # ------------------------------------
1118 Implicitation_For_Depth = SIMP(statut = 'o',typ = 'R',defaut = 0.55,
1119 # ------------------------------------
1120 fr = 'Fixe la valeur du coefficient d''implicitation sur C dans l''etape de propagation (cf. Note de principe).\n\
1121 Les valeurs inferieures a 0.5 donnent un schema instable.',
1122 ang = 'Sets the value of the implicitation coefficient for C (the celerity of waves) in the propagation step (refer to principle note).\n\
1123 Values below 0.5 result in an unstable scheme.'),
1125 # ------------------------------------
1126 Implicitation_For_Velocity = SIMP(statut = 'o',typ = 'R',defaut = 0.55,
1127 # ------------------------------------
1128 fr = 'Fixe la valeur du coefficient d''implicitation sur la vitesse dans l''etape de propagation (cf. Note de principe).\n\
1129 Les valeurs inferieures a 0.5 donnent un schema instable.',
1130 ang = 'Sets the value of the implicitation coefficient for velocity in the propagation step (refer to principle note).\n\
1131 Values below 0.5 result in an unstable condition.'),
1133 ), # fin Discretization_Implicitation
1136 # ------------------------------------
1137 Tidal=FACT(statut='f',
1138 # ------------------------------------
1139 Tidal_Flats = SIMP(statut = 'o',typ = bool,defaut = True,
1140 # ------------------------------------
1141 fr = 'permet de supprimer les tests sur les bancs decouvrants si on est certain qu''il n''y en aura pas, En cas de doute : oui',
1142 ang = 'When no,the specific treatments for tidal flats are by-passed. This spares time, but of course you must be sure that you have no tidal flats'),
1144 # ------------------------------------
1145 b_tidal_flats = BLOC(condition = 'Tidal_Flats == True',
1146 # ------------------------------------
1147 # ------------------------------------
1148 Option_For_The_Treatment_Of_Tidal_Flats = SIMP(statut = 'o',typ = 'TXM',
1149 # ------------------------------------
1150 into = ["Equations solved everywhere with correction on tidal flats", "Dry elements frozen", "1 but with porosity (defina method)",],
1151 defaut="Equations solved everywhere with correction on tidal flats",),
1153 # ------------------------------------
1154 b_option_tidal_flats = BLOC(condition = 'Option_For_The_Treatment_Of_Tidal_Flats == "Equations solved everywhere with correction on tidal flats"',
1155 # ------------------------------------
1156 # ------------------------------------
1157 Treatment_Of_Negative_Depths = SIMP( statut = 'o',typ = 'TXM',
1158 # ------------------------------------
1159 into = [ 'No treatment', 'Smoothing', 'Flux control'],
1160 defaut = 'Smoothing' ,),
1161 ), # fin bloc b_option_tidal_flats
1163 # ------------------------------------
1164 Threshold_For_Negative_Depths = SIMP( statut = 'o',typ = 'R', defaut = 0.0 ,
1165 # ------------------------------------
1166 fr = 'En dessous du seuil, les hauteurs negatives sont lissees',
1167 ang = 'Below the threshold the negative depths are smoothed',),
1169 # ------------------------------------
1170 Threshold_Depth_For_Receding_Procedure = SIMP(statut = 'o',typ = 'R',defaut = 0 ,
1171 # ------------------------------------
1172 fr = 'Si > 0., declenche la procedure de ressuyage qui evite le franchissement parasite des digues mal discretisees',
1173 ang = 'If > 0., will trigger the receding procedure that avoids overwhelming of dykes which are too loosely discretised ',),
1176 # ------------------------------------
1177 H_Clipping = SIMP(statut = 'o',typ = bool,defaut = False,
1178 # ------------------------------------
1179 fr = 'Determine si on desire ou non limiter par valeur inferieure la hauteur d eau H (dans le cas des bancs decouvrants par exemple).',
1180 ang = 'Determines whether limiting the water depth H by a lower value desirable or not. (for instance in the case of tidal flats)\n\
1181 This key-word may have an influence on mass conservation since the truncation of depth is equivalent to adding mass.',),
1183 # ------------------------------------
1184 b_clipping = BLOC(condition = 'H_Clipping == True',
1185 # ------------------------------------
1186 # ------------------------------------
1187 Minimum_Value_Of_Depth = SIMP( statut = 'o',typ = 'R', defaut = 0.0 ,
1188 # ------------------------------------
1189 fr = 'Fixe la valeur minimale de a lorsque loption CLIPPING DE H est activee.',
1190 ang = 'Sets the minimum H value when option H CLIPPING is implemented. Not fully implemented.',),
1192 ), # fin bloc b_tidal_flats
1195 # ------------------------------------
1197 # ------------------------------------
1199 # ------------------------------------
1200 Newmark_Time_Integration_Coefficient = SIMP( statut = 'o',typ = 'TXM',
1201 # ------------------------------------
1202 defaut = "Euler explicite",
1203 into = ["Euler explicite","Order 2 in time"],),
1205 # ------------------------------------
1206 Option_For_Characteristics = SIMP( statut = 'o',typ = 'TXM',
1207 # ------------------------------------
1209 into = ['Strong','Weak',],),
1214 )# fin NUMERICAL_PARAMETERS
1216 # -----------------------------------------------------------------------
1217 PHYSICAL_PARAMETERS = PROC(nom = "PHYSICAL_PARAMETERS",op = None,
1218 # -----------------------------------------------------------------------
1219 UIinfo = { "groupes" : ( "CACHE", )},
1220 # ------------------------------------
1221 Friction_Setting = FACT(statut = 'o',
1222 # ------------------------------------
1223 # ------------------------------------
1224 Friction_Data_File = SIMP( statut = 'o',
1225 # ------------------------------------
1226 typ = ('Fichier', ';;All Files (*)'),
1227 fr = 'fichier de donnees pour le frottement',
1228 ang = 'friction data file',),
1230 # ------------------------------------
1231 Depth_In_Friction_Terms = SIMP( statut = 'o',typ = 'TXM',
1232 # ------------------------------------
1234 into = ("Nodal", "Average"),),
1236 # ------------------------------------
1237 Law_Of_Bottom_Friction = SIMP( statut = 'o',typ = 'TXM',
1238 # ------------------------------------
1239 defaut = 'No friction' ,
1240 into = ('No friction', 'Haaland', 'Chezy', 'Strickler', 'Manning', 'Nikuradse','Log law','Colebrooke_white'),
1241 fr = 'selectionne le type de formulation utilisee pour le calcul du frottement sur le fond.',
1242 ang = 'Selects the type of formulation used for the bottom friction.',),
1244 # ------------------------------------
1245 b_Law_Friction = BLOC(condition = "Law_Of_Bottom_Friction!= 'No friction'",
1246 # ------------------------------------
1247 # ------------------------------------
1248 Friction_Coefficient = SIMP( statut = 'o',typ = 'R',
1249 # ------------------------------------
1251 fr = 'Fixe la valeur du coefficient de frottement pour la formulation choisie. \
1252 Attention, la signification de ce chiffre varie suivant la formule choisie : \
1253 1 : coefficient lineaire 2 : coefficient de Chezy 3 : coefficient de Strickler \
1254 4 : coefficient de Manning 5 : hauteur de rugosite de Nikuradse',
1255 ang = 'Sets the value of the friction coefficient for the selected formulation. \
1256 It is noteworthy that the meaning of this figure changes according to the selected formula (Chezy, Strickler, etc.) : \
1257 1 : linear coefficient 2 : Chezy coefficient 3 : Strickler coefficient 4 : Manning coefficient 5 : Nikuradse grain size',),
1258 ), # Fin b_Law_Friction
1260 # ------------------------------------
1261 b_Colebrooke_White = BLOC(condition = "Law_Of_Bottom_Friction == 'Colebrooke_white'",
1262 # ------------------------------------
1263 # ------------------------------------
1264 Manning_Default_Value_For_Colebrook_White_Law = SIMP( statut = 'o',typ = 'R',
1265 # ------------------------------------
1267 fr = 'valeur par defaut du manning pour la loi de frottement de Colebrook-White ',
1268 ang = 'Manning default value for the friction law of Colebrook-White ',),
1269 ), # Fin b_Colebrooke_White
1271 # ------------------------------------
1272 Non_Submerged_Vegetation_Friction = SIMP( statut = 'o',typ = bool,
1273 # ------------------------------------
1275 fr = 'calcul du frottement du a la vegetation non submergee',
1276 ang = 'friction calculation of the non-submerged vegetation',),
1278 # ------------------------------------
1279 b_Non_Sub = BLOC(condition = ' Non_submerged_Vegetation_Friction == True',
1280 # ------------------------------------
1281 # ------------------------------------
1282 Diameter_Of_Roughness_Elements = SIMP( statut = 'o',typ = 'R',
1283 # ------------------------------------
1285 fr = 'diametre des elements de frottements',
1286 ang = 'diameter of roughness element',),
1288 # ------------------------------------
1289 Spacing_Of_Roughness_Elements = SIMP( statut = 'o',typ = 'R',
1290 # ------------------------------------
1292 fr = 'espacement des elements de frottement',
1293 ang = 'spacing of rouhness element',),
1296 # ------------------------------------
1297 Law_Of_Friction_On_Lateral_Boundaries = SIMP( statut = 'o',typ = 'TXM',
1298 # ------------------------------------
1299 defaut = "No friction" ,
1300 into = ("No friction", "Haaland", "Chezy", "Strickler", "Manning", "Nikuradse", "Log law", "Colebrook-white"),
1301 fr = 'selectionne le type de formulation utilisee pour le calcul du frottement sur les parois laterales.',
1302 ang = 'Selects the type of formulation used for the friction on lateral boundaries.',),
1305 # ------------------------------------
1306 b_Fric = BLOC(condition = 'Law_Of_Friction_On_Lateral_Boundaries != "No friction"',
1307 # ------------------------------------
1309 # PNPNPN soizic ?Ne faut-il pas un bloc sur Law_Of_Friction_On_Lateral_Boundaries
1310 # ------------------------------------
1311 Roughness_Coefficient_Of_Boundaries = SIMP( statut = 'o',typ = 'R',
1312 # ------------------------------------
1314 fr = 'Fixe la valeur du coefficient de frottement sur les frontieres solides avec un regime turbulent rugueux\n\
1315 sur les bords du domaine. meme convention que pour le coefficient de frottement',
1316 ang = 'Sets the value of the friction coefficient of the solid boundary with the bed roughness option. Same meaning than friction coefficient',),
1318 # ------------------------------------
1319 Maximum_Number_Of_Friction_Domains = SIMP( statut = 'o',typ = 'I',
1320 # ------------------------------------
1322 fr = 'nombre maximal de zones pouvant etre definies pour le frottement. Peut etre augmente si necessaire',
1323 ang = 'maximal number of zones defined for the friction. Could be increased if needed',),
1326 # ------------------------------------
1327 Definition_Of_Zones = SIMP(typ = bool, statut = 'o', defaut = False,
1328 # ------------------------------------
1329 fr = 'Declenche l''appel a def_zones, pour donner un numero de zone a chaque point',
1330 ang = 'Triggers the call to def_zones to give a zone number to every point',),
1332 # ------------------------------------
1333 b_def_zone = BLOC (condition = 'Definition_Of_Zones == True',
1334 # ------------------------------------
1335 # ------------------------------------
1336 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM", defaut = "complete DEF_ZONES subroutine"),
1337 # ------------------------------------
1340 ), # Fin du bloc Friction
1341 # ------------------------------------
1342 Meteorology = FACT(statut = 'f',
1343 # ------------------------------------
1345 # ------------------------------------
1346 Wind = SIMP(statut = 'o',typ = bool,defaut = False,
1347 # ------------------------------------
1348 fr = 'Prise en compte ou non des effets du vent.',
1349 ang = 'Determines whether the wind effects are to be taken into account or not.'),
1351 # ------------------------------------
1352 b_Wind = BLOC(condition = "Wind == True",
1353 # ------------------------------------
1354 # ------------------------------------
1355 Wind_Velocity_Along_X = SIMP(statut = 'o',typ = 'R', defaut = 0.,
1356 # ------------------------------------
1357 fr = 'Composante de la vitesse du vent suivant l''axe des x (m/s).',
1358 ang = 'Wind velocity, component along x axis (m/s).',),
1360 # ------------------------------------
1361 Wind_Velocity_Along_Y = SIMP(statut = 'o',typ = 'R',defaut = 0.,
1362 # ------------------------------------
1363 fr = 'Composante de la vitesse du vent suivant l''axe des y (m/s).',
1364 ang = 'Wind velocity, component along y axis (m/s).',),
1366 # ------------------------------------
1367 Threshold_Depth_For_Wind = SIMP(statut = 'o',typ = 'R',defaut = 0.,
1368 # ------------------------------------
1369 fr = 'Retire la force due au vent dans les petites profondeurs',
1370 ang = 'Wind is not taken into account for small depths' ),
1372 # ------------------------------------
1373 Coefficient_Of_Wind_Influence = SIMP( statut = 'o',typ = 'R', defaut = 0.0 ,
1374 # ------------------------------------
1375 fr = 'Fixe la valeur du coefficient d entrainement du vent (cf. Note de principe).',
1376 ang = 'Sets the value of the wind driving coefficient. Refer to principle note.',),
1378 # ------------------------------------
1379 Option_For_Wind = SIMP( statut = 'o',typ = 'TXM', defaut = 0 ,
1380 # ------------------------------------
1381 into = ["No wind","Constant in time and space","Variable in time","Variable in time and space"],
1382 fr = 'donne les options pour introduire le vent',
1383 ang = 'gives option for managing the wind'),
1385 # ------------------------------------
1386 file_For_wind = BLOC (condition = 'Option_For_Wind == "Variable in time" or Option_For_Wind == "Variable in time and space"',
1387 # ------------------------------------
1388 # ------------------------------------
1389 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
1390 # ------------------------------------
1391 defaut = "give formated file 3"),
1392 ), # fin bloc file_For_wind
1394 # ------------------------------------
1395 speed_For_wind = BLOC (condition = 'Option_For_Wind == "Constant in time and space"',
1396 # ------------------------------------
1397 # ------------------------------------
1398 Speed_And_Direction_Of_Wind = SIMP( statut = 'o', defaut = (0.0, 0.0) ,
1399 # ------------------------------------
1400 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1401 fr = 'Donne la vitesse et la direction (en degres de 0 a 360, 0 etant y = 0 et x = +inf) du vent',
1402 ang = 'gives the speed and direction (degre (from 0 to 360), 0 given y = 0 anx x = +infinity)',),
1407 # ------------------------------------
1408 Air_Pressure = SIMP(statut = 'o',typ = bool, defaut = False,
1409 # ------------------------------------
1410 fr = 'Permet de decider si l''on prend ou non en compte l''influence d''un champ de pression.',
1411 ang = 'Provided to decide whether the influence of an atmosphere field is taken into account or not.'),
1413 # ------------------------------------
1414 b_air = BLOC(condition = "Air_Pressure == True",
1415 # ------------------------------------
1416 # ------------------------------------
1417 Value_Of_Atmospheric_Pressure = SIMP( statut = 'o',typ = 'R',
1418 # ------------------------------------
1420 fr = 'donne la valeur de la pression atmospherique lorsquelle est constante en temps et en espace',
1421 ang = 'gives the value of atmospheric pressure when it is contant in time and space',),
1424 # ------------------------------------
1425 Rain_Or_Evaporation = SIMP(statut = 'o',typ = bool,
1426 # ------------------------------------
1428 fr = 'Pour ajouter un apport ou une perte d''eau en surface.',
1429 ang = 'to add or remove water at the free surface. ',),
1431 # -----------------------------------
1432 b_Rain = BLOC(condition = "Rain_Or_Evaporation == True",
1433 # ------------------------------------
1434 # ------------------------------------
1435 Rain_Or_Evaporation_In_Mm_Per_Day = SIMP(statut = 'o',typ = 'I',defaut = 0.),
1436 # ------------------------------------
1439 ), # fin Meteorology
1441 # ------------------------------------
1442 Wave = FACT(statut = 'f',
1443 # ------------------------------------
1445 # ------------------------------------
1446 Wave_Driven_Currents = SIMP(statut = 'o',
1447 # ------------------------------------
1448 typ = bool, defaut = False,
1449 fr = 'Active la prise en compte des courants de houle',
1450 ang = 'Wave driven currents are taken into account.'),
1452 # ------------------------------------
1453 b_Wave = BLOC(condition = "Wave_Driven_Currents == True",
1454 # ------------------------------------
1455 # ------------------------------------
1456 Record_Number_In_Wave_File = SIMP(statut = 'o',typ = 'I', defaut = 1,
1457 # ------------------------------------
1458 fr = 'Numero d enregistrement dans le fichier des courants de houle',
1459 ang = 'Record number to read in the wave driven currents file'),
1465 # ------------------------------------
1466 Parameters_Estimation = FACT(statut = 'f',
1467 # ------------------------------------
1468 # ------------------------------------
1469 Parameter_Estimation = SIMP( statut = 'o',typ = 'TXM', into = ["Friction","Frottement","Steady"],
1470 # ------------------------------------
1471 fr = 'Liste des parametres a estimer',
1472 ang = 'List of parameter to be estimated',),
1474 # ------------------------------------
1475 Identification_Method = SIMP( statut = 'o',typ = 'TXM',
1476 # ------------------------------------
1477 into = ["List of tests", "Gradient simple", "Conj gradient", "Lagrange interp."],
1478 defaut = 'GRadient simple',),
1480 # ------------------------------------
1481 Maximum_Number_Of_Iterations_For_Identification = SIMP(statut = 'o',typ = 'I',defaut = 20,
1482 # ------------------------------------
1483 fr = 'chaque iteration comprend au moins un calcul direct et un calcul adjoint',
1484 ang = 'every iteration implies at least a direct and an adjoint computation', ),
1486 # ------------------------------------
1487 Cost_Function = SIMP(statut = "f",typ = 'TXM',
1488 # ------------------------------------
1489 defaut = 'Computed with h, u , v',
1490 into = ['Computed with h, u , v', 'Computed with c, u , v'],),
1492 # ------------------------------------
1493 Tolerances_For_Identification = FACT( statut = 'o',
1494 # ------------------------------------
1495 # PNPNPN recalculer en liste de 4 reels
1496 # ------------------------------------
1497 Tolerance_For_H = SIMP( statut = 'o',typ = 'R', defaut=1.E-3,
1498 # ------------------------------------
1499 fr = "precision absolue sur H",
1500 ang = "absolute precision on H",),
1501 # ------------------------------------
1502 Tolerance_For_U = SIMP( statut = 'o',typ = 'R', defaut=1.E-3,
1503 # ------------------------------------
1504 fr = "precision absolue sur U",
1505 ang = "absolute precision on U",),
1506 # ------------------------------------
1507 Tolerance_For_V = SIMP( statut = 'o',typ = 'R', defaut=1.E-3,
1508 # ------------------------------------
1509 fr = "precision absolue sur V",
1510 ang = "absolute precision on V",),
1511 # ------------------------------------
1512 Tolerance_For_cout = SIMP( statut = 'o',typ = 'R', defaut=1.E-4,
1513 # ------------------------------------
1514 fr = "precision relative sur la fonction cout",
1515 ang = "relative precision on the cost function",),
1516 ),# fin Tolerances_For_Identification
1518 ), # fin fact Parameters_Estimation
1520 # ------------------------------------
1521 Sources = FACT( statut = 'f',
1522 # ------------------------------------
1523 # ------------------------------------
1524 Number_Of_Sources = SIMP( statut = 'o',typ = 'I', defaut = 0 ,),
1525 # ------------------------------------
1526 # Attention a la sortie a reformatter. voir page 68 du user manuel V7
1528 # ------------------------------------
1529 sources_exists = BLOC(condition = "Number_Of_Sources!= 0",
1530 # ------------------------------------
1532 # ------------------------------------
1533 Sources_File = SIMP( statut = 'o',
1534 # ------------------------------------
1535 typ = ('Fichier', 'All Files (*)',),
1536 fr = 'Nom du fichier contenant les informations variables en temps des sources',
1537 ang = 'Name of the file containing time-dependent information on sources',),
1539 #PNPNPNPN saisir autant de source que le nombre
1540 # ------------------------------------
1541 Source = FACT(statut = 'o',
1542 # ------------------------------------
1544 # ------------------------------------
1545 Abscissae_Of_Sources = SIMP( statut = 'o',
1546 # ------------------------------------
1547 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1548 fr = 'Valeurs des abscisses des sources de debit et de traceur.',
1549 ang = 'abscissae of sources of flowrate and/or tracer',),
1551 # ------------------------------------
1552 Ordinates_Of_Sources = SIMP( statut = 'o',
1553 # ------------------------------------
1554 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1555 fr = 'Valeurs des ordonnees des sources de debit et de traceur.',
1556 ang = 'ordinates of sources of flowrate and/or tracer',),
1558 # ------------------------------------
1559 Water_Discharge_Of_Sources = SIMP( statut = 'o',
1560 # ------------------------------------
1561 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1562 fr = 'Valeurs des debits des sources.',
1563 ang = 'values of water discharge of sources',),
1565 # ------------------------------------
1566 Velocities_Of_The_Sources_Along_X = SIMP( statut = 'f',
1567 # ------------------------------------
1568 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1569 fr = 'Vitesses du courant a chacune des sources. Si elles ne sont pas donnees, on considere que la vitesse est celle du courant',
1570 ang = 'Velocities at the sources. If they are not given, the velocity of the flow at this location is taken',),
1572 # ------------------------------------
1573 Velocities_Of_The_Sources_Along_Y = SIMP( statut = 'f',
1574 # ------------------------------------
1575 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
1576 fr = 'Vitesses du courant a chacune des sources',
1577 ang = 'Velocities at the sources',),
1579 ), # Fin du Fact Source
1581 # ------------------------------------
1582 Type_Of_Sources = SIMP(statut = 'o',typ = 'TXM',into = ["Normal","Dirac"],
1583 # ------------------------------------
1584 fr = 'Source portee par une base elements finis Source portee par une fonction de Dirac',
1585 ang = 'Source term multiplied by a finite element basis, Source term multiplied by a Dirac function',),
1587 ),#fin bloc source - exits
1588 ),#fin MC source - exits
1591 # ------------------------------------
1592 Coriolis_Settings = FACT(statut = 'f',
1593 # ------------------------------------
1594 # ------------------------------------
1595 Coriolis = SIMP( statut='o',typ=bool,
1596 # ------------------------------------
1598 fr = 'Prise en compte ou non de la force de Coriolis.',
1599 ang= 'The Coriolis force is taken into account or ignored.',),
1601 # -------------------------------------------------------
1602 Coriolis_Coefficient = SIMP( statut='o',typ='R',
1603 # -------------------------------------------------------
1605 fr = 'Fixe la valeur du coefficient de la force de Coriolis. Celui-ci doit etre calcule en fonction de la latitude l \n\
1606 par la formule FCOR = 2w sin(l) , w etant la vitesse de rotation de la terre. w = 7.27 10-5 rad/s \n\
1607 Les composantes de la force de Coriolis sont alors : FU = FCOR x V FV = - FCOR x U',
1608 ang= 'Sets the value of the Coriolis force coefficient, in cartesian coordinates. This coefficient,\n\
1609 denoted FCOR in the code, should be equal to 2 w sin(l)d where w denotes the earth angular speed of rotation and l the latitude. \n\
1610 w = 7.27 10-5 rad/sec The Coriolis force components are then: FU = FCOR x V, FV = -FCOR x U In spherical coordinates, the latitudes are known',),
1611 ), #fin Coriolis_Settings
1615 # ------------------------------------
1616 Various = FACT( statut = 'f',
1617 # ------------------------------------
1618 # ------------------------------------
1619 Water_Density = SIMP(statut = 'o',typ = 'R',defaut = 1000.,
1620 # ------------------------------------
1621 fr = 'Fixe la valeur de la masse volumique de l eau.',
1622 ang = 'set the value of water density',
1625 # ------------------------------------
1626 Gravity_Acceleration = SIMP(statut = 'o',typ = 'R',defaut = 9.81,
1627 # ------------------------------------
1628 fr = 'Fixe la valeur de l acceleration de la pesanteur.',
1629 ang = 'Set the value of the acceleration due to gravity.',
1632 # ------------------------------------
1633 Vertical_Structures = SIMP(statut = 'o',typ = bool,defaut = False,
1634 # ------------------------------------
1635 fr = 'Prise en compte de la force de trainee de structures verticales',
1636 ang = 'drag forces from vertical structures are taken into account',),
1638 # ------------------------------------
1639 maskob = BLOC (condition = 'Vertical_Structures == True',
1640 # ------------------------------------
1641 # ------------------------------------
1642 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
1643 # ------------------------------------
1644 defaut = "subroutine DRAGFO must then be implemented"),
1648 # -----------------------------------------------------------------------
1649 Secondary_Currents_Settings = FACT( statut='f',
1650 # -----------------------------------------------------------------------
1651 # -----------------------------------------------------------------------
1652 Secondary_Currents = SIMP( statut='o',typ=bool,
1653 # -----------------------------------------------------------------------
1655 fr = 'Pour prendre en compte les courants secondaires',
1656 ang= 'Using the parametrisation for secondary currents',
1659 # -----------------------------------------------------------------------
1660 b_currents_exists = BLOC(condition = "Secondary_Currents == True",
1661 # -----------------------------------------------------------------------
1662 # -----------------------------------------------------------------------
1663 Production_Coefficient_For_Secondary_Currents = SIMP( statut='o',typ='R',
1664 # -----------------------------------------------------------------------
1666 fr = 'Une constante dans les termes de creation de Omega',
1667 ang= 'A constant in the production terms of Omega',),
1669 # -----------------------------------------------------------------------
1670 Dissipation_Coefficient_For_Secondary_Currents = SIMP( statut='o',typ='R',
1671 # -----------------------------------------------------------------------
1673 fr = 'Coefficient de dissipation de Omega',
1674 ang= 'Coefficient of dissipation term of Omega',),
1676 ), # fin b_currents_exists
1677 ), # fin Secondary_Currents_Settings
1679 # ------------------------------------
1680 Tsunami = FACT(statut = 'f',
1681 # ------------------------------------
1682 # -------------------------------------------------------
1683 Option_For_Tsunami_Generation = SIMP( statut='o',typ='I', defaut=0 ,
1684 # -------------------------------------------------------
1688 # -------------------------------------------------------
1689 Physical_Characteristics_Of_The_Tsunami = SIMP( statut='o',typ='R',
1690 # -------------------------------------------------------
1692 defaut=(100.0, 210000.0, 75000.0, 13.6, 81.0, 41.0, 110.0, 0.0, 0.0, 3.0) ,
1697 )# fin PHYSICAL_PARAMETERS
1699 # -----------------------------------------------------------------------
1700 OUTPUT_FILES = PROC(nom = "OUTPUT_FILES",op = None,
1701 # -----------------------------------------------------------------------
1703 # ------------------------------------
1704 Graphic_And_Listing_Printouts = FACT(statut = 'f',
1705 # ------------------------------------
1706 # ------------------------------------
1707 Variables_For_Graphic_Printouts = SIMP(statut = 'o',max = "**", typ = 'TXM',
1708 # ------------------------------------
1709 into=[ "Velocity along X axis (m/s)", "Velocity along Y axis (m/s)", "Wave celerity (m/s)", "Water depth (m)",
1710 "Free surface elevation (m)", "Bottom elevation (m)", "Froude number ", "Scalar flowrate of fluid (m2/s)",
1711 "Tracer 1 etc. ", "Turbulent kinetic energy in K-Epsilon model (J/kg)", "Dissipation of turbulent energy (W/kg)",
1712 "Turbulent viscosity of K-Epsilon model (m2/s)", "Flowrate along X axis (m2/s)", "Flowrate along Y axis (m2/s)",
1713 "Scalar velocity (m/s)", "Wind along X axis (m/s)", "Wind along Y axis (m/s)", "Air pressure (Pa)",
1714 "Friction coefficient", "Drift along X (m)", "Drift along Y (m)", "Courant number ", "Supplementary variable N ",
1715 "Supplementary variable O ", "Supplementary variable R ", "Supplementary variable Z ", "Maximum elevation",
1716 "Time of maximum elevation ", "Maximum velocity", "Time of maximum velocity", "Friction velocity "],
1718 #homo="SansOrdreNiDoublon"),
1720 # ------------------------------------
1721 Graphic_Printout_Period = SIMP(statut = 'o', typ = 'I',defaut = 1,
1722 # ------------------------------------
1723 fr = 'Determine la periode en nombre de pas de temps d''impression des VARIABLES POUR LES SORTIES GRAPHIQUES \n\
1724 dans le FICHIER DES RESULTATS.',
1725 ang = 'Determines, in number of time steps, the printout period for the VARIABLES FOR GRAPHIC PRINTOUTS in the RESULTS FILE.' ,),
1727 # ------------------------------------
1728 Number_Of_First_Time_Step_For_Graphic_Printouts = SIMP(statut = 'o', typ = 'I',defaut = 1,
1729 # ------------------------------------
1730 fr = 'Determine le nombre de pas de temps a partir duquel debute l''ecriture des resultats dans le listing.',
1731 ang = 'Determines the number of time steps after which the results are first written into the listing.'),
1734 # ------------------------------------
1735 Results_File = SIMP( statut = 'o',
1736 # ------------------------------------
1737 typ = ('Fichier', 'All Files (*)',),
1738 fr = 'Nom du fichier dans lequel sont ecrits les resultats du calcul avec la periodicite donnee PERIODE POUR LES SORTIES GRAPHIQUES.',
1739 ang = 'Name of the file into which the computation results shall be written, the periodicity being given by GRAPHIC PRINTOUT PERIOD.',),
1741 # ------------------------------------
1742 Results_File_Format = SIMP( statut = 'o',typ = 'TXM',into = ['Serafin','MED','SerafinD'], defaut = 'Serafin',
1743 # ------------------------------------
1744 fr = 'Format du fichier de resultats. Les valeurs possibles sont : \n\
1745 - SERAFIN : format standard simple precision pour Telemac; \n\
1746 - SERAFIND: format standard double precision pour Telemac; \n\
1747 - MED : format MED base sur HDF5' ,
1748 ang = 'Results file format. Possible values are:\n \
1749 - SERAFIN : classical single precision format in Telemac;\n\
1750 - SERAFIND: classical double precision format in Telemac; \n\
1751 - MED : MED format based on HDF5' ,
1754 # ------------------------------------
1755 Listing_Printout_Period = SIMP(statut = 'o', typ = 'I',defaut = 1,
1756 # ------------------------------------
1757 fr = 'Determine la periode en nombre de pas de temps d''impression des variables',
1758 ang = 'Determines, in number of time steps, the printout period for the variables',),
1760 # ------------------------------------
1761 Listing_Printout = SIMP( statut='o',typ=bool, defaut=True ,
1762 # ------------------------------------
1763 fr = 'Sortie des resultats sur support papier. Si on met False, le listing ne contient que lentete et la mention FIN NORMALE DU PROGRAMME : La Valeur False est a eviter',
1764 ang= 'Result printout on hard copy. When NO is selected, the listing only includes the heading and the phrase "NORMAL END OF PROGRAM" In addition, the options MASS BALANCE and VALIDATION are inhibited. Value False Not recommended for use.',
1767 # ------------------------------------
1768 Variables_To_Be_Printed = SIMP(statut = 'o',max = "**", typ = 'TXM',
1769 # ------------------------------------
1770 into = [ "Velocity along X axis (m/s)", "Velocity along Y axis (m/s)", "Wave celerity (m/s)", "Water depth (m)",
1771 "Free surface elevation (m)", "Bottom elevation (m)", "Froude number", "Scalar flowrate of fluid (m2/s)",
1772 "Tracer", "Turbulent kinetic energy in K-Epsilon model (J/kg)", "Dissipation of turbulent energy (W/kg)",
1773 "Turbulent viscosity of K-Epsilon model (m2/s)", "Flowrate along x axis (m2/s)", "Flowrate along y axis (m2/s)",
1774 "Scalar velocity (m/s)", "Wind along x axis (m/s)", "Wind along y axis (m/s)", "Air pressure (Pa)",
1775 "Friction coefficient", "Drift along x (m)", "Drift along y (m)", "Courant number",
1776 "Supplementary variable N", "Supplementary variable O", "Supplementary variable R", "Supplementary variable Z"]
1777 ,homo="SansOrdreNiDoublon"),
1779 ),# fin Listing_Graphic_Printouts
1781 # ------------------------------------
1782 Formatted_Results_File = SIMP( statut = 'f',
1783 # ------------------------------------
1784 typ = ('Fichier','All Files (*)',),
1785 fr = 'Fichier de resultats formate mis a la disposition de l utilisateur. \
1786 Les resultats a placer dans ce fichier seront a ecrire sur le canal 29.',
1787 ang = 'Formatted file of results made available to the user. \
1788 The results to be entered into this file shall be written on channel 29.',),
1791 # ------------------------------------
1792 Binary_Results_File = SIMP( statut = 'f',
1793 # ------------------------------------
1794 typ = ('Fichier', ';;All Files (*)',),
1795 fr = "Fichier de resultats code en binaire mis a la disposition de l'utilisateur.\n\
1796 Les resultats a placer dans ce fichier seront a ecrire sur le canal 28.",
1797 ang = "Additional binary-coded result file made available to the user. \n\
1798 The results to be entered into this file shall be written on channel 28.",),
1801 # ------------------------------------
1802 Output_Of_Initial_Conditions = SIMP(typ = bool, statut = 'o',
1803 # ------------------------------------
1805 fr = 'Si Vrai, impression des conditions initiales dans les resultats',
1806 ang = 'If True, output of initial conditions in the results'),
1808 # ------------------------------------
1809 Number_Of_Private_Arrays = SIMP( statut='o',typ='I',
1810 # ------------------------------------
1812 fr = 'Nombre de tableaux mis a disposition de l utilisateur',
1813 ang= 'Number of arrays for own user programming',
1817 # ------------------------------------
1818 Information_About_Solver = SIMP(typ = bool, statut = 'f',
1819 # ------------------------------------
1821 fr = "Si vrai, Donne a chaque pas de temps le nombre d'iterations necessaires a la convergence du solveur de l'etape de propagation.",
1822 ang = "if True, prints the number of iterations that have been necessary to get the solution of the linear system.",),
1824 # ------------------------------------
1825 Mass_Balance = SIMP( statut='o',typ=bool,
1826 # ------------------------------------
1828 fr = 'Determine si l on effectue ou non le bilan de masse sur le domaine. Cette procedure calcule a chaque pas de temps : \n\
1829 - les flux aux entrees et sorties du domaine, - le flux global a travers lensemble des parois du domaine (liquides ou solides) \n\
1830 - l erreur relative sur la masse pour ce pas de temps.\n\
1831 En fin de listing, on trouve l erreur relative sur la masse pour l ensemble du calcul.\n\
1832 Il ne sagit que dun calcul indicatif car il nexiste pas dexpression compatible du debit en formulation c,u,v.',
1834 ang= 'Determines whether a check of the mass-balance over the domain is mader or not.\n\
1835 This procedures computes the following at each time step: the domain inflows and outflows, the overall flow across all the boundaries,\n\
1836 the relative error in the mass for that time step. The relative error in the mass over the whole computation can be found at the end of the listing.',
1839 # ------------------------------------
1840 Controls = FACT( statut='f',
1841 # ------------------------------------
1842 # ------------------------------------
1843 Control_Sections = SIMP(statut = 'f',typ = Tuple(2),validators = VerifTypeTuple(('I','I')),
1844 # ------------------------------------
1845 fr = 'Couples de points (numeros globaux dans le maillage) entre lesquels les debits instantanes et cumules seront donnes.',
1846 ang = 'Couples of points (global numbers in the mesh) defining sections where the instantaneous and cumulated discharges will be given',),
1848 # ------------------------------------
1849 Printing_Cumulated_Flowrates = SIMP( statut = 'o',typ = bool, defaut = False ,
1850 # ------------------------------------
1851 fr = 'impression du flux cumule a travers les sections de controle',
1852 ang = 'printing the cumulated flowrates through control sections',),
1854 # ------------------------------------
1855 Compatible_Computation_Of_Fluxes = SIMP( statut = 'o',typ = bool, defaut = False ,
1856 # ------------------------------------
1857 fr = 'flux a travers les sections de controle, calcul compatible avec l impermeabilite sous forme faible',
1858 ang = 'flowrates through control sections, computation compatible with the weak formulation of no-flux boundary condition',),
1860 # ------------------------------------
1861 Sections_Input_File = SIMP( statut = 'f', typ = ('Fichier', 'All Files (*)'),
1862 # ------------------------------------
1863 fr = 'sections input file, partitioned',
1864 ang = 'sections input file, partitioned',),
1866 # ------------------------------------
1867 Sections_Output_File = SIMP( statut = 'f', typ = ('Fichier', 'All Files (*)'),
1868 # ------------------------------------
1869 fr = 'sections output file, written by the master',
1870 ang = 'sections output file, written by the master',),
1873 # ------------------------------------
1874 Fourier = FACT(statut = 'f',
1875 # ------------------------------------
1876 # ------------------------------------
1877 Fourier_Analysis_Periods = SIMP( statut='o',
1878 # ------------------------------------
1879 max='**', typ = 'R',
1880 fr = 'Liste des periodes que lon veut analyser',
1881 ang= 'List of periods to be analysed',),
1883 # ------------------------------------
1884 Time_Range_For_Fourier_Analysis = SIMP( statut='o',
1885 # ------------------------------------
1886 typ = Tuple(2), validators = VerifTypeTuple(('R','R')),
1888 fr = 'Pour le calcul du marnage et de la phase de la maree',
1889 ang= 'For computing tidal range and phase of tide',
1892 # ------------------------------------
1893 List_Of_Points = SIMP( statut='o',
1894 # ------------------------------------
1895 typ = Tuple(2), validators = VerifTypeTuple(('I','I')),
1896 fr = 'Liste de points remarquables pour les impressions',
1897 ang= 'List of remarkable points for printouts',),
1899 # ------------------------------------
1900 Names_Of_Points = SIMP( statut='o',typ='TXM',
1901 # ------------------------------------
1903 fr = 'Noms des points remarquables pour les impressions',
1904 ang= 'Names of remarkable points for printouts',
1908 ) # FIN OUTPUT_FILES
1911 # -----------------------------------------------------------------------
1912 CONSTRUCTION_WORKS_MODELLING = PROC(nom = "CONSTRUCTION_WORKS_MODELLING",op = None,
1913 # -----------------------------------------------------------------------
1915 # Attention calculer le logique BREACH
1917 # ------------------------------------
1918 Number_Of_Culverts = SIMP( statut = 'o',typ = 'I',
1919 # ------------------------------------
1921 fr = 'Nombre de siphons traites comme des termes sources ou puits. Ces siphons doivent etre decrits comme des sources \
1922 dans le fichier cas. Leurs caracteristiques sont donnees dans le fichier de donnees des siphons (voir la documentation ecrite)',
1923 ang = 'Number of culverts treated as source terms. They must be described as sources in the domain\
1924 and their features are given in the culvert data file (see written documentation)',),
1925 # ------------------------------------
1926 culvert_exists = BLOC(condition = "Number_Of_Culverts!= 0",
1927 # ------------------------------------
1928 # ------------------------------------
1929 Culvert_Data_File = SIMP( statut = 'o',typ = ('Fichier', 'All Files (*)',),
1930 # ------------------------------------
1931 fr = 'Fichier de description des siphons presents dans le modele',
1932 ang = 'Description of culvert existing in the model',),
1933 ), # fin bloc culvert_exists
1935 # ------------------------------------
1936 Number_Of_Tubes = SIMP( statut = 'o',typ = 'I',
1937 # ------------------------------------
1939 fr = 'Nombre de buses ou ponts traites comme des termes sources ou puits. Ces buses doivent etre decrits comme des sources\n\
1940 dans le fichier cas. Leurs caracteristiques sont donnees dans le fichier de donnees des buses (voir la documentation ecrite)',
1941 ang = 'Number of tubes or bridges treated as source terms. They must be described as sources in the domain \n\
1942 and their features are given in the tubes data file (see written documentation)',),
1943 # ------------------------------------
1944 b_Tubes = BLOC(condition = "Number_Of_Tubes!= 0",
1945 # ------------------------------------
1946 # ------------------------------------
1947 Tubes_Data_File = SIMP( statut = 'o',
1948 # ------------------------------------
1949 typ = ('Fichier', 'All Files (*)',),
1950 fr = 'Fichier de description des buses/ponts presents dans le modele',
1951 ang = 'Description of tubes/bridges existing in the model',),
1952 ), # in bloc b_Tubes
1954 # ------------------------------------
1955 Number_Of_Weirs = SIMP(statut = 'o',typ = 'I',defaut = 0,
1956 # ------------------------------------
1957 fr = 'Nombre de seuils qui seront traites par des conditions aux limites. \n\
1958 Ces seuils doivent etre decrits comme des frontieres du domaine de calcul',
1959 ang = 'Number of weirs that will be treated by boundary conditions.',
1961 # ------------------------------------
1962 b_Weirs = BLOC(condition = "Number_Of_Weirs!= 0",
1963 # ------------------------------------
1964 # ------------------------------------
1965 Weirs_Data_File = SIMP( statut = 'o',
1966 # ------------------------------------
1967 typ = ('Fichier', 'All Files (*)',),
1968 fr = 'Fichier de description des seuils presents dans le modele',
1969 ang = 'Description of weirs existing in the model',),
1971 # ------------------------------------
1972 Type_Of_Weirs = SIMP( statut = 'o',typ = 'TXM',
1973 # ------------------------------------
1974 into = ["Horizontal with same number of nodes upstream/downstream (Historical solution with bord)",
1975 "General (New solution with sources points)"],
1976 defaut = "Horizontal with same number of nodes upstream/downstream (Historical solution with bord)",
1977 fr = 'Méthode de traitement des seuils ',
1978 ang = 'Method for treatment of weirs',),
1981 # ------------------------------------
1982 Breach = SIMP(statut = 'o',typ = bool,defaut = False,
1983 # ------------------------------------
1984 fr = 'Prise en compte de breches dans le calcul par modification altimetrique dans le maillage.',
1985 ang = 'Take in account some breaches during the computation by modifying the bottom level of the mesh.',),
1987 # ------------------------------------
1988 b_Breaches = BLOC (condition = 'Breach == True',
1989 # ------------------------------------
1990 # ------------------------------------
1991 Breaches_Data_File = SIMP( statut = 'o',typ = ('Fichier', 'All Files (*)',),
1992 # ------------------------------------
1993 fr = 'Fichier de description des breches',
1994 ang = 'Description of breaches',),
1998 ) # Fin CONSTRUCTION_WORKS_MODELLING
2001 # -----------------------------------------------------------------------
2002 GENERAL_PARAMETERS = PROC(nom = "GENERAL_PARAMETERS",op = None,
2003 # -----------------------------------------------------------------------
2004 UIinfo = { "groupes" : ( "CACHE", )},
2005 # ------------------------------------
2006 Location = FACT(statut = 'o',
2007 # ------------------------------------
2008 # ------------------------------------
2009 Origin_Coordinates = SIMP( statut='o',
2010 # ------------------------------------
2011 typ = Tuple(2),validators = VerifTypeTuple(('I','I')),defaut = (0,0),
2012 fr = 'Valeur en metres, utilise pour eviter les trop grands nombres, transmis dans le format Selafin mais pas d autre traitement pour l instant',
2013 ang= 'Value in metres, used to avoid large real numbers, added in Selafin format, but so far no other treatment',),
2016 # ------------------------------------
2017 Spherical_Coordinates = SIMP(typ = bool,statut = 'o',defaut = False,
2018 # ------------------------------------
2019 fr = 'Choix des coordonnees spheriques pour la realisation du calcul ( pour les grands domaines de calcul).',
2020 ang = 'Selection of spherical coordinates to perform the computation (for large computation domains).'),
2022 # ------------------------------------
2023 b_Spher = BLOC(condition = 'Spherical_Coordinates == True',
2024 # ------------------------------------
2025 # ------------------------------------
2026 Latitude_Of_Origin_Point = SIMP(typ = 'R',statut = 'o',defaut = 48.,
2027 # ------------------------------------
2028 fr = 'Determine l origine utilisee pour le calcul de latitudes lorsque l on effectue un calcul en coordonnees spheriques.',
2029 ang = 'Determines the origin used for computing latitudes when a computation is made in spherical coordinates.this latitude\n\
2030 is in particular used to compute the Coriolis force. In cartesian coordinates, Coriolis coefficient is considered constant.'),
2032 # ------------------------------------
2033 Spatial_Projection_Type = SIMP(statut = 'o',typ = 'TXM',
2034 # ------------------------------------
2035 into = ["Mercator","Latitude longitude"]),
2038 # ------------------------------------
2039 b_Spher_faux = BLOC(condition = 'Spherical_Coordinates == False',
2040 # ------------------------------------
2041 # ------------------------------------
2042 Spatial_Projection_Type = SIMP(statut = 'o',typ = 'TXM',
2043 # ------------------------------------
2044 into = ["Cartesian, not georeferenced","Mercator","Latitude longitude"],
2045 defaut = "Cartesian, not georeferenced",),
2046 ), # fin b_Spher_faux
2048 ), # Fin de Location
2049 # ------------------------------------
2050 Time = FACT(statut = 'o',
2051 # ------------------------------------
2052 regles = (AU_MOINS_UN('Number_Of_Time_Steps','Duration'),
2053 EXCLUS('Number_Of_Time_Steps','Duration'),
2056 # -----------------------------------------------------------------------
2057 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
2058 # -----------------------------------------------------------------------
2059 defaut = "Choose between Keywords 'Number_Of_Time_Steps' or 'Duration'"),
2061 # ------------------------------------
2062 Time_Step = SIMP(statut = 'o',
2063 # ------------------------------------
2064 typ = 'R', defaut = 1,
2065 fr = 'Definit le nombre de pas de temps effectues lors de l''execution du code.',
2066 ang = 'Specifies the number of time steps performed when running the code.'),
2068 # ------------------------------------
2069 Number_Of_Time_Steps = SIMP(statut = 'f',typ = 'I',
2070 # ------------------------------------
2071 fr = 'Definit le nombre de pas de temps effectues lors de l''execution du code.',
2072 ang = 'Specifies the number of time steps performed when running the code.'),
2074 # ------------------------------------
2075 Duration = SIMP(statut = 'f',typ = 'R',
2076 # ------------------------------------
2077 fr = 'duree de la simulation. alternative au parametre nombre de pas de temps. \n\
2078 On en deduit le nombre de pas de temps en prenant l''entier le plus proche de (duree du calcul/pas de temps).\n\
2079 Si le nombre de pas de temps est aussi donne, on prend la plus grande valeur',
2080 ang = 'duration of simulation. May be used instead of the parameter NUMBER OF TIME STEPS. \n\
2081 The nearest integer to (duration/time step) is taken. If NUMBER OF TIME STEPS is also given, the greater value is taken',),
2084 # Attention, on laisse la règle mais il est possible d avoir les 2 en entrées --> attention au convert
2085 # ------------------------------------
2086 Variable_Time_Step = SIMP(statut = 'o',typ = bool, defaut=False,
2087 # ------------------------------------
2088 fr = 'Pas de temps variable pour avoir un nombre de courant souhaite',
2089 ang = 'Variable time-step to get a given Courant number'),
2091 # ------------------------------------
2092 b_var_time = BLOC(condition = "Variable_Time_Step == True" ,
2093 # ------------------------------------
2094 # ------------------------------------
2095 Desired_Courant_Number = SIMP(statut = 'o',typ = 'R',
2096 # ------------------------------------
2097 fr = 'Nombre de Courant souhaite ',
2098 ang = 'Desired Courant number',),
2101 # ------------------------------------
2102 Original_Date_Of_Time = FACT( statut = 'o',
2103 # ------------------------------------
2104 fr = "Permet de fixer la date d'origine des temps du modele lors de la prise en compte de la force generatrice de la maree.",
2105 ang = 'Give the date of the time origin of the model when taking into account the tide generating force.',
2106 Year = SIMP(statut = 'o',typ = 'I',val_min = 1900, defaut = 1900),
2107 Month = SIMP(statut = 'o',typ = 'I',val_min = 1,val_max = 12, defaut = 1),
2108 Day = SIMP(statut = 'o',typ = 'I',val_min = 1,val_max = 31,defaut = 1),),
2110 # ------------------------------------
2111 Original_Hour_Of_Time = FACT( statut = 'o',
2112 # ------------------------------------
2113 fr = "Permet de fixer l'heure d'origine des temps du modele lors de la prise en compte de la force generatrice de la maree.",
2114 ang = 'Give the time of the time origin of the model when taking into account the tide generating force.',
2115 Hour = SIMP(statut = 'o',typ = 'I',val_min = 0,val_max = 24, defaut = 0),
2116 Minute = SIMP(statut = 'o',typ = 'I',val_min = 0,val_max = 60, defaut = 0),
2117 Second = SIMP(statut = 'o',typ = 'I',val_min = 0,val_max = 60, defaut = 0),
2120 # ------------------------------------
2121 Stop_If_A_Steady_State_Is_Reached = SIMP(statut = 'o',
2122 # ------------------------------------
2123 typ = bool,defaut = False),
2125 # ------------------------------------
2126 b_stop = BLOC(condition = "Stop_If_A_Steady_State_Is_Reached == True" ,
2127 # ------------------------------------
2128 # ------------------------------------
2129 Stop_Criteria = SIMP(statut = 'o',typ = Tuple(3),validators = VerifTypeTuple(('R','R','R')),
2130 # ------------------------------------
2131 fr = "Criteres d'arret pour un ecoulement permanent. ces coefficients sont respectivement appliques a\n\
2132 1- U et V 2- H 3- T ",
2133 ang = 'Stop criteria for a steady state These coefficients are applied respectively to\n\
2134 1- U and V 2- H 3- T ',),
2137 # ------------------------------------
2138 Control_Of_Limits = SIMP(statut = 'o',
2139 # ------------------------------------
2140 typ = bool, defaut = False,
2141 fr = 'Le programme s''arrete si les limites sur u,v,h ou t sont depassees',
2142 ang = 'The program is stopped if the limits on u,v,h, or t are trespassed',),
2144 # ------------------------------------
2145 b_limit = BLOC(condition = "Control_Of_Limit == True" ,
2146 Limit_Values = FACT(statut = 'o',
2147 # Attention : 1 seul MC ds Telemac
2148 # ------------------------------------
2149 fr = 'valeurs mini et maxi acceptables min puis max',
2150 ang = 'min and max acceptable values ',
2152 # ------------------------------------
2153 Limit_Values_H = SIMP(statut = 'o',typ = Tuple(2),
2154 # ------------------------------------
2155 validators = VerifTypeTuple(('R','R')), defaut = (-1000,9000)),
2156 # ------------------------------------
2157 Limit_Values_U = SIMP(statut = 'o',typ = Tuple(2),
2158 # ------------------------------------
2159 validators = VerifTypeTuple(('R','R')), defaut = (-1000,1000)),
2160 # ------------------------------------
2161 Limit_Values_V = SIMP(statut = 'o',typ = Tuple(2),
2162 # ------------------------------------
2163 validators = VerifTypeTuple(('R','R')), defaut = (-1000,1000)),
2164 # ------------------------------------
2165 Limit_Values_T = SIMP(statut = 'o',typ = Tuple(2),
2166 # ------------------------------------
2167 validators = VerifTypeTuple(('R','R')), defaut = (-1000,1000)),
2168 ),), # fin Fact et b_limit
2171 # Attention il faut recalculer en sortie : il faut 0 ou 1 et non un boolean
2172 # ------------------------------------
2173 Debugger = SIMP(typ = bool , statut = 'o',
2174 # ------------------------------------
2176 fr= 'Pour imprimer la sequence des appels, mettre 1',
2177 ang = 'If 1, calls of subroutines will be printed in the listing',),
2179 ) # Fin GENERAL_PARAMETERS
2182 # -----------------------------------------------------------------------
2183 TURBULENCE = PROC(nom = "TURBULENCE",op = None,
2184 # -----------------------------------------------------------------------
2186 # -----------------------------------------------------------------------
2187 Turbulence_Model = SIMP( statut = 'o',typ = 'TXM', defaut = "Constant Viscosity",
2188 # -----------------------------------------------------------------------
2189 into = ("Constant Viscosity", "Elder", "K-Epsilon Model", "Smagorinski"),
2190 fr = 'Pour Elder, il faut pas oublier d ajuster les deux valeurs du mot-cle : COEFFICIENTS ADIMENSIONNELS DE DISPERSION\n\
2191 Pour K-Epsilon Model, ce meme parametre doit retrouver sa vraie valeur physique car elle est utilisee comme telle dans le modele de turbulence',
2192 ang = 'When Elder, the two values of key-word : NON-DIMENSIONAL DISPERSION COEFFICIENTS are used \n\
2193 When K-Epsilon Model, this parameter should recover its true physical value, since it is used as such in the turbulence model.',),
2195 # ------------------------------------
2196 b_turbu_const = BLOC(condition = 'Turbulence_Model == "Constant Viscosity"',
2197 # ------------------------------------
2198 # ------------------------------------
2199 Velocity_Diffusivity = SIMP( statut = 'o',typ = 'R',
2200 # ------------------------------------
2202 fr = 'Fixe de facon uniforme pour l ensemble du domaine la valeur du coefficient de diffusion de viscosite globale (dynamique + turbulente).\n\
2203 Cette valeur peut avoir une influence non negligeable sur la forme et la taille des recirculations.',
2204 ang = 'Sets, in an even way for the whole domain, the value of the coefficient of global (dynamic+turbulent) viscosity. \n\
2205 this value may have a significant effect both on the shapes and sizes of recirculation zones.',),
2206 ), # fin b_turbu_const
2208 # ------------------------------------
2209 b_turbu_elder = BLOC(condition = 'Turbulence_Model == "Elder"',
2210 # ------------------------------------
2211 # ------------------------------------
2212 Non_Dimensional_Dispersion_Coefficients = SIMP (statut = 'o',
2213 # ------------------------------------
2214 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),defaut = (6.,0.6),
2215 fr = 'coefficients longitudinal et transversal dans la formule de Elder.',
2216 ang = 'Longitudinal and transversal coefficients in elder s formula. Used only with turbulence model number 2',),
2217 ), # fin bloc b_turbu_elder
2219 # -----------------------------------------------------------------------
2220 Accuracy_Of_K = SIMP( statut = 'o',typ = 'R', defaut = 1e-09 ,
2221 # -----------------------------------------------------------------------
2222 fr = 'Fixe la precision demandee sur k pour le test d arret dans letape de diffusion et termes sources du modele k-epsilon.',
2223 ang = 'Sets the required accuracy for computing k in the diffusion and source terms step of the k-epsilon model.',),
2225 # -----------------------------------------------------------------------
2226 Accuracy_Of_Epsilon = SIMP( statut = 'o',typ = 'R', defaut = 1e-09 ,
2227 # -----------------------------------------------------------------------
2228 fr = 'Fixe la precision demandee sur epsilon pour le test darret dans letape de diffusion et termes sources de k et epsilon.',
2229 ang = 'Sets the required accuracy for computing epsilon in the diffusion and source-terms step of the k-epsilon model.',),
2231 # -----------------------------------------------------------------------
2232 Time_Step_Reduction_For_K_Epsilon_Model = SIMP( statut = 'f',typ = 'R', defaut = 1.0 ,
2233 # -----------------------------------------------------------------------
2234 fr = 'Coefficient reducteur du pas de temps pour le modele k-epsilon (qui est normalement identique a celui du systeme hydrodynamique).\n\
2235 Utilisation deconseillee',
2236 ang = 'Time step reduction coefficient for k-epsilon model (which is normally same the same as that of the hydrodynamic system).\n\
2237 Not recommended for use.',),
2239 # -----------------------------------------------------------------------
2240 Maximum_Number_Of_Iterations_For_K_And_Epsilon = SIMP( statut = 'o',typ = 'I',
2241 # -----------------------------------------------------------------------
2243 fr = 'Fixe le nombre maximum diterations accepte lors de la resolution du systeme diffusion-termes sources du modele k-epsilon.',
2244 ang = 'Sets the maximum number of iterations that are acceptable when solving the diffusion source-terms step of the k-epsilon model.',),
2246 # -----------------------------------------------------------------------
2247 Turbulence_Model_For_Solid_Boundaries = SIMP( statut = 'o',typ = 'TXM',
2248 # -----------------------------------------------------------------------
2250 into = ('Smooth', 'Rough'),
2251 fr = 'Permet de choisir le regime de turbulence aux parois ',
2252 ang = 'Provided for selecting the type of friction on the walls',),
2254 # -----------------------------------------------------------------------
2255 Solver_For_K_Epsilon_Model = SIMP( statut = 'o',typ = 'TXM',
2256 # -----------------------------------------------------------------------
2257 defaut = "Conjugate gradient" ,
2258 into = ("Conjugate gradient", "Conjugate residuals", "Conjugate gradient on normal equation",
2259 "Minimum error", "Conjugate gradient squared", "Conjugate gradient squared stabilised (CGSTAB)",
2261 fr = 'Permet de choisir le solveur utilise pour la resolution du systeme du modele k-epsilon',
2262 ang = 'Makes it possible to select the solver used for solving the system of the k-epsilon model.',),
2264 # -----------------------------------------------------------------------
2265 b_gmres = BLOC(condition = 'Solver_For_K_Epsilon_Model == "GMRES"',
2266 # -----------------------------------------------------------------------
2267 # -----------------------------------------------------------------------
2268 Option_For_The_Solver_For_K_Epsilon_Model = SIMP( statut = 'o',typ = 'I',
2269 # -----------------------------------------------------------------------
2270 defaut = 2 ,val_min = 2,val_max = 15,
2271 fr = 'le mot cle est la dimension de lespace de KRILOV (valeurs conseillees entre 2 et 7)',
2272 ang = 'dimension of the krylov space try values between 2 and 7',),
2273 ), # fin bloc b_gmres
2275 # -----------------------------------------------------------------------
2276 Preconditioning_For_K_Epsilon_Model = SIMP( statut = 'o',typ = 'TXM',
2277 # -----------------------------------------------------------------------
2278 defaut = 'Diagonal' ,
2279 into = ("Diagonal", "No preconditioning", "Diagonal condensed", "Crout", "Diagonal and crout", "Diagonal condensed and crout"),
2280 fr = 'Permet de preconditionner le systeme relatif au modele k-epsilon',
2281 ang = 'Preconditioning of the linear system in the diffusion step of the k-epsilon model.',
2283 # -----------------------------------------------------------------------
2284 Information_About_K_Epsilon_Model = SIMP(statut = 'o',typ = bool,defaut = True,
2285 # -----------------------------------------------------------------------
2286 fr = 'Donne le nombre d iterations du solveur de l etape de diffusion et termes sources du modele k-epsilon.',
2287 ang = 'Gives the number of iterations of the solver in the diffusion and source terms step of the k-epsilon model.',
2294 # -----------------------------------------------------------------------
2295 PARTICLE_TRANSPORT = PROC(nom = "PARTICLE_TRANSPORT",op = None,
2296 # -----------------------------------------------------------------------
2297 # -----------------------------------------------------------------------
2298 Number_Of_Drogues = SIMP(statut = 'o',typ = 'I',defaut = 0,
2299 # -----------------------------------------------------------------------
2300 fr = 'Permet d''effectuer un suivi de flotteurs',
2301 ang = 'Number of drogues in the computation.',),
2303 # -----------------------------------------------------------------------
2304 Algae_Transport_Model = SIMP( statut = 'o',typ = bool, defaut = False ,
2305 # -----------------------------------------------------------------------
2306 fr = 'Si oui, les flotteurs seront des algues',
2307 ang = 'If yes, the floats or particles will be algae',),
2309 # -----------------------------------------------------------------------
2310 algae_exists = BLOC(condition = "Algae_Transport_Model == True",
2311 # -----------------------------------------------------------------------
2312 # -----------------------------------------------------------------------
2313 Algae_Type = SIMP( statut = 'o',typ = 'TXM',
2314 # -----------------------------------------------------------------------
2315 into = ["Sphere", "Iridaea flaccida (close to ulva)", "Pelvetiopsis limitata", "Gigartina leptorhynchos"],
2317 fr = 'Type des algues. Pour sphere les algues seront modelisees comme des spheres, pour les autres choix voir Gaylord et al.(1994)',
2318 ang = 'Algae type. For sphere, the algae particles will be modeled as spheres, for the other choices see Gaylord et al.(1994)',),
2320 # -----------------------------------------------------------------------
2321 Diameter_Of_Algae = SIMP( statut = 'o',typ = 'R', defaut = 0.1 ,
2322 # -----------------------------------------------------------------------
2323 fr = 'Diametre des algues en m',
2324 ang = 'Diametre of algae in m',),
2326 # -----------------------------------------------------------------------
2327 Density_Of_Algae = SIMP( statut = 'o',typ = 'R', defaut = 1050.0 ,
2328 # -----------------------------------------------------------------------
2329 fr = 'Masse volumique des algues en kg/m3',
2330 ang = 'Density of algae in kg/m3',),
2332 # -----------------------------------------------------------------------
2333 Thickness_Of_Algae = SIMP( statut = 'o',typ = 'R', defaut = 0.01 ,
2334 # -----------------------------------------------------------------------
2335 fr = 'Epaisseur des algues en m',
2336 ang = 'Thickness of algae in m',),
2340 # -----------------------------------------------------------------------
2341 Oil_Spill_Model = SIMP( statut = 'o',typ = bool, defaut = False ,
2342 # -----------------------------------------------------------------------
2343 fr = 'pour declencher le modele de derive de nappes, dans ce cas le fichier de commandes migrhycar est necessaire',
2344 ang = 'will trigger the oil spill model, in this case the migrhycar steering file is needed',),
2346 # -----------------------------------------------------------------------
2347 oil_exists = BLOC(condition = "Oil_Spill_Model == True",
2348 # -----------------------------------------------------------------------
2349 # -----------------------------------------------------------------------
2350 Oil_Spill_Steering_File = SIMP( statut = 'o',typ = ('Fichier', 'All Files (*)',),
2351 # -----------------------------------------------------------------------
2352 fr = 'Contient les donnees pour le modele de derive de nappes',
2353 ang = 'Contains data for the oil spill model',),
2356 # -----------------------------------------------------------------------
2357 drogues_exists = BLOC(condition = "Number_Of_Drogues!= 0 or Algae_Transport_Model == True or Oil_Spill_Model == True",
2358 # -----------------------------------------------------------------------
2359 # -----------------------------------------------------------------------
2360 Drogues_File = SIMP( statut = 'o',typ = ('Fichier', 'All Files (*)',),
2361 # -----------------------------------------------------------------------
2362 fr = 'Fichier de resultat avec les positions des flotteurs',
2363 ang = 'Results file with positions of drogues',),
2365 # -----------------------------------------------------------------------
2366 Printout_Period_For_Drogues = SIMP(statut = 'o',typ = 'I',defaut = 1,
2367 # -----------------------------------------------------------------------
2368 fr = 'Nombre de pas de temps entre 2 sorties de positions de flotteurs dans le fichier des resultats binaire supplementaire\n\
2369 N affecte pas la qualite du calcul de la trajectoire',
2370 ang = 'Number of time steps between 2 outputs of drogues positions in the binary file',),
2371 ),#fin drogues ou algae
2374 # -----------------------------------------------------------------------
2375 Stochastic_Diffusion_Model = SIMP( statut = 'o',typ = 'I', defaut = 0 ,
2376 # -----------------------------------------------------------------------
2377 fr = 'Pour les particules : flotteurs, algues, hydrocarbures',
2378 ang = 'Meant for particles: drogues, algae, oil spills',),
2380 # -----------------------------------------------------------------------
2381 Number_Of_Lagrangian_Drifts = SIMP( statut = 'o',typ = 'I', defaut = 0 ,
2382 # -----------------------------------------------------------------------
2383 fr = 'Permet deffectuer simultanement plusieurs calculs de derives lagrangiennes initiees a des pas differents',
2384 ang = 'Provided for performing several computations of lagrangian drifts starting at different times.',),
2386 # -----------------------------------------------------------------------
2387 b_cons = BLOC(condition = "Number_Of_Lagrangian_Drifts != 0",
2388 # -----------------------------------------------------------------------
2389 # -----------------------------------------------------------------------
2390 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
2391 # -----------------------------------------------------------------------
2392 defaut = "Add A and G in the VARIABLES FOR GRAPHIC PRINTOUTS key-word in POST_PROCESSING SECTION"),
2396 # -----------------------------------------------------------------------
2397 TRACERS = PROC(nom = "TRACERS",op = None,
2398 # -----------------------------------------------------------------------
2400 # -----------------------------------------------------------------------
2401 Tracers_Setting = FACT(statut = 'o',
2402 # -----------------------------------------------------------------------
2404 # -----------------------------------------------------------------------
2405 Number_Of_Tracers = SIMP( statut='o',typ='I',
2406 # -----------------------------------------------------------------------
2408 fr = 'Definit le nombre de traceurs.',
2409 ang= 'Defines the number of tracers',),
2410 #PNPNPN Recalculer Names_Of_Tracers et Initial_Values_Of_Tracers comme des listes
2411 # pour Names_Of_Tracers = Names_Of_Tracers+Names_Of_Unit
2412 # il faut faire un validateur (la chaine doit faire 16 caracteres evtuellement complete par des blancs)
2414 # ------------------------------------
2415 Tracer = FACT(statut = 'o', max="**",
2416 # ------------------------------------
2417 # -----------------------------------------------------------------------
2418 Name_Of_Tracer = SIMP( statut='o',typ='TXM',
2419 # -----------------------------------------------------------------------
2420 fr = 'Noms des traceurs en 16 caracteres',
2421 ang= 'Name of tracers in 32 characters',),
2423 # -----------------------------------------------------------------------
2424 Name_Of_Unit = SIMP( statut='o',typ='TXM',
2425 # -----------------------------------------------------------------------
2426 fr = 'Noms de l unité en 16 caracteres',
2427 ang= 'Name of unit in 16 characters',),
2429 b_Computation_Continued = BLOC(condition = 'Computation_Continued == True',
2430 #PNPNPN Attention: global_jdc ne fonctionne pas bien : pas de propagation si chgt de valeur de Computation_Continued
2431 # -----------------------------------------------------------------------
2432 Initial_Values_Of_Tracers = SIMP( statut='o',
2433 # -----------------------------------------------------------------------
2434 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
2436 fr = 'Fixe la valeur initiale du traceur.',
2437 ang= 'Sets the initial value of the tracer.',),
2439 ), # fin b_Computation_Continued
2440 # ------------------------------------
2441 Boundary_Conditions = FACT( statut = 'f',
2442 # ------------------------------------
2443 # -----------------------------------------------------------------------
2444 Prescribed_Tracers_Values = SIMP( statut='o',
2445 # -----------------------------------------------------------------------
2446 typ = Tuple(2),validators = VerifTypeTuple(('R','R')),
2447 fr = 'Valeurs du traceur imposees aux frontieres liquides entrantes. Lire la partie du manuel consacree aux conditions aux limites',
2448 ang= 'Tracer values prescribed at the inflow boundaries. Read the manual section dealing with the boundary conditions',),
2449 ), # fin Boundary_Conditions
2452 # -----------------------------------------------------------------------
2453 Density_Effects = SIMP( statut='o',typ=bool,
2454 # -----------------------------------------------------------------------
2456 fr = 'prise en compte du gradient horizontal de densite le traceur est alors la salinite',
2457 ang= 'the horizontal gradient of density is taken into account the tracer is then the salinity',),
2459 # -----------------------------------------------------------------------
2460 b_Density_Effects = BLOC(condition = 'Density_Effects == True',
2461 # -----------------------------------------------------------------------
2462 # ------------------------------------
2463 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
2464 # ------------------------------------
2465 defaut='the first Tracer must be the salinity expressed in kg/m3'),
2467 # -----------------------------------------------------------------------
2468 Mean_Temperature = SIMP( statut='o',typ='R',
2469 # -----------------------------------------------------------------------
2471 fr = 'temperature de reference pour le calcul des effets de densite ',
2472 ang= 'reference temperature for density effects',),
2474 ), # fin b_Density_Effects
2476 ), # fin b_Tracers_Settings
2477 # -----------------------------------------------------------------------
2478 Solving = FACT( statut='o',
2479 # -----------------------------------------------------------------------
2480 # -----------------------------------------------------------------------
2481 Solver_For_Diffusion_Of_Tracers = SIMP( statut='o',typ='TXM',
2482 # -----------------------------------------------------------------------
2483 defaut='1="conjugate gradient"' ,
2484 into =('1="conjugate gradient"', '2="conjugate residual"', '3="conjugate gradient on a normal equation"',
2485 '4="minimum error"', '5="squared conjugate gradient"', '6="cgstab"', '7="gmres "', '8="direct"'),),
2487 # -----------------------------------------------------------------------
2488 Solver_Option_For_Tracers_Diffusion = SIMP( statut='o',typ='I',
2489 # -----------------------------------------------------------------------
2491 fr = 'si le solveur est GMRES (7) le mot cle est la dimension de lespace de KRILOV (valeurs conseillees entre 2 et 15)',
2492 ang= 'WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE TRY VALUES BETWEEN 2 AND 15',),
2494 # -----------------------------------------------------------------------
2495 Preconditioning_For_Diffusion_Of_Tracers = SIMP( statut='o',typ='TXM',
2496 # -----------------------------------------------------------------------
2497 defaut='2="diagonal"' ,
2498 into =('2="diagonal"', '0="no preconditioning "', '3="diagonal condensed"', '7="crout"', '14="diagonal and crout"', '21="diagonal condensed and crout"'),
2499 fr = 'Permet de preconditionner le systeme relatif au traceur. Memes definition et possibilites que pour le mot-cle PRECONDITIONNEMENT.',
2500 ang= 'Preconditioning of the linear system in the tracer diffusion step. Same definition and possibilities as for the keyword PRECONDITIONING',
2504 # -----------------------------------------------------------------------
2505 Accuracy = FACT( statut='o',
2506 # -----------------------------------------------------------------------
2507 # -----------------------------------------------------------------------
2508 Accuracy_For_Diffusion_Of_Tracers = SIMP( statut='o',typ='R', defaut=1e-06 ,
2509 # -----------------------------------------------------------------------
2510 fr = 'Fixe la precision demandee pour le calcul de la diffusion du traceur.',
2511 ang= 'Sets the required accuracy for computing the tracer diffusion.',),
2513 # -----------------------------------------------------------------------
2514 Maximum_Number_Of_Iterations_For_Diffusion_Of_Tracers = SIMP( statut='o',typ='I', defaut=60 ,
2515 # -----------------------------------------------------------------------
2516 fr = 'Limite le nombre diterations du solveur a chaque pas de temps pour le calcul de la diffusion du traceur.',
2517 ang= 'Limits the number of solver iterations at each time step for the diffusion of tracer.',),
2520 # -----------------------------------------------------------------------
2521 Sources = FACT( statut='o',
2522 # -----------------------------------------------------------------------
2523 # ------------------------------------
2524 Consigne = SIMP(statut = "o",homo = 'information',typ = "TXM",
2525 # ------------------------------------
2526 defaut = "La longueur de la liste doit etre nb de source * nb de tracers"),
2527 # -----------------------------------------------------------------------
2528 Values_Of_The_Tracers_At_The_Sources = SIMP( statut='o',typ='R', max='**' ,
2529 # -----------------------------------------------------------------------
2530 fr = 'Valeurs des traceurs a chacune des sources',
2531 ang= 'Values of the tracers at the sources',),
2533 # -----------------------------------------------------------------------
2534 Metereology = FACT( statut='o',
2535 # -----------------------------------------------------------------------
2536 # en fait, c'est une liste de Tuple de 2. Il faudrait caluler la taille en fonction du Nombre de sources
2537 # -----------------------------------------------------------------------
2538 Values_Of_Tracers_In_The_Rain = SIMP(
2539 # -----------------------------------------------------------------------
2540 statut='o',typ='R',defaut=0, max=2 , fr = '', ang= '',),
2541 ), # fin Metereology
2543 # -----------------------------------------------------------------------
2544 Numerical = FACT( statut='o',
2545 # -----------------------------------------------------------------------
2547 # -----------------------------------------------------------------------
2548 Implicitation_Coefficient_Of_Tracers = SIMP( statut='o',typ='R',
2549 # -----------------------------------------------------------------------
2551 fr = 'Fixe la valeur du coefficient dimplicitation du traceur',
2552 ang= 'Sets the value of the implicitation coefficient for the tracer',),
2554 # -----------------------------------------------------------------------
2555 Diffusion_Of_Tracers = SIMP( statut='o',typ=bool,
2556 # -----------------------------------------------------------------------
2558 fr = 'Prise en compte ou non de la diffusion du traceur passif.',
2559 ang= 'The diffusion of the passive tracer is taken into account or ignored.',),
2561 # ------------------------------------
2562 b_Diffusion_Of_Tracers = BLOC(condition = 'Diffusion_Of_Tracers == True',
2563 # ------------------------------------
2564 # ------------------------------------
2565 Coefficient_For_Diffusion_Of_Tracers = SIMP( statut='o',typ='R',
2566 # ------------------------------------
2568 fr = 'Fixe la valeur du coefficient de diffusion du traceur. Linfluence de ce parametre sur levolution du traceur dans le temps est importante.',
2569 ang= 'Sets the value of the tracer diffusivity.',),
2571 # ------------------------------------
2572 Option_For_The_Diffusion_Of_Tracers = SIMP( statut='o',typ='TXM',
2573 # ------------------------------------
2574 defaut='Diffusion in the form div( nu grad(T))' ,
2575 into=[ 'Diffusion in the form div( nu grad(T))', 'Diffusion in the form 1/h div ( h nu grad(T))',],),
2576 ), # fin b_Diffusion_Of_Tracers
2578 # ------------------------------------
2579 Scheme_For_Advection_Of_Tracers = SIMP( statut='o',typ='TXM',
2580 # ------------------------------------
2581 defaut="CHARACTERISTICS" ,
2582 into =("NO ADVECTION", "CHARACTERISTICS", "EXPLICIT + SUPG", "EXPLICIT LEO POSTMA", "EXPLICIT + MURD SCHEME N",
2583 "EXPLICIT + MURD SCHEME PSI", "LEO POSTMA FOR TIDAL FLATS", "N-SCHEME FOR TIDAL FLATS"),
2584 fr = 'Choix du schema de convection pour les traceurs, remplace FORME DE LA CONVECTION',
2585 ang= 'Choice of the advection scheme for the tracers, replaces TYPE OF ADVECTION',),
2587 # ------------------------------------
2588 Scheme_Option_For_Advection_Of_Tracers = SIMP( statut='o',typ='TXM',
2589 # ------------------------------------
2591 into=['explicit','predictor-corrector for tracers'],
2592 fr = 'Si present remplace et a priorite sur : OPTION POUR LES CARACTERISTIQUES OPTION DE SUPG Si schema PSI : 1=explicite 2=predicteur-correcteur pour les traceurs',
2593 ang= 'If present replaces and has priority over: OPTION FOR CHARACTERISTICS SUPG OPTION IF PSI SCHEME: 1=explicit 2=predictor-corrector for tracers',),
2595 # ------------------------------------
2596 Mass_Lumping_On_Tracers = SIMP ( statut='o',typ='R',
2597 # ------------------------------------
2599 fr = 'Fixe le taux de mass-lumping effectue sur le traceur.',
2600 ang = 'Sets the amount of mass-lumping that is performed on the tracer.',),
2603 # -----------------------------------------------------------------------
2604 Degradation = FACT( statut='o',
2605 # -----------------------------------------------------------------------
2607 # PN Attention, il faut recalculer Law_Of_Tracers_Degradation
2608 # et les coefficients.
2609 # Question : pourquoi 2 et pas selon le nb de tracer
2610 # Est ce que ce $ va sous tracer ?
2611 # -----------------------------------------------------------------------
2612 Law1_Of_Tracers_Degradation = SIMP( statut='o',typ='TXM',
2613 # -----------------------------------------------------------------------
2614 into=["NO DEGRADATION","F(T90) LAW"],
2615 defaut="NO DEGRADATION",
2616 fr = 'Prise en compte dune loi de decroissance des traceurs',
2617 ang= 'Take in account a law for tracers decrease',),
2619 # -----------------------------------------------------------------------
2620 b_Law1 = BLOC(condition = 'Law1_Of_Tracers_Degradation == "F(T90) LAW"',
2621 # -----------------------------------------------------------------------
2622 # -----------------------------------------------------------------------
2623 Coefficient_1_For_Law_Of_Tracers_Degradation = SIMP( statut='o',typ='R',
2624 # -----------------------------------------------------------------------
2625 fr = 'Coefficient 1 de la loi de decroissance des traceurs',
2626 ang= 'Coefficient 1 of law for tracers decrease',),
2629 # -----------------------------------------------------------------------
2630 Law2_Of_Tracers_Degradation = SIMP( statut='o',typ='TXM',
2631 # -----------------------------------------------------------------------
2632 into=["NO DEGRADATION","F(T90) LAW"],
2633 defaut="NO DEGRADATION",
2634 fr = 'Prise en compte dune loi de decroissance des traceurs',
2635 ang= 'Take in account a law for tracers decrease',),
2637 # -----------------------------------------------------------------------
2638 b_Law2 = BLOC(condition = 'Law2_Of_Tracers_Degradation == "F(T90) LAW"',
2639 # -----------------------------------------------------------------------
2640 # -----------------------------------------------------------------------
2641 Coefficient_2_For_Law_Of_Tracers_Degradation = SIMP( statut='o',typ='R',
2642 # -----------------------------------------------------------------------
2643 fr = 'Coefficient 2 de la loi de decroissance des traceurs',
2644 ang= 'Coefficient 2 of law for tracers decrease',),
2646 ), # fin Degradation
2651 Ordre_Des_Commandes = ( 'INITIALIZATION', 'BOUNDARY_CONDITIONS','GENERAL_PARAMETERS', 'PHYSICAL_PARAMETERS', 'NUMERICAL_PARAMETERS',
2652 'TURBULENCE', 'TRACERS', 'PARTICLE_TRANSPORT', 'CONSTRUCTION_WORKS_MODELLING', 'TIDE_PARAMETERS', 'OUTPUT_FILES')