2 # -*- coding: latin-1 -*-
9 def __convert__(self,valeur):
10 if type(valeur) == types.StringType: return None
11 if len(valeur) != self.ntuple: return None
15 return "Date : jj/mm/aaaa "
25 def __init__(self,ntuple):
28 def __convert__(self,valeur):
29 if type(valeur) == types.StringType:
31 if len(valeur) != self.ntuple:
36 return "Tuple de %s elements" % self.ntuple
40 JdC = JDC_CATA (code = 'TELEMAC2D',
43 # =======================================================================
44 # Catalog entry for the MAP function : c_pre_interfaceBody_mesh
45 # =======================================================================
47 VERSION_CATALOGUE="TRUNK"
48 # -----------------------------------------------------------------------
49 COMPUTATION_ENVIRONMENT = PROC(nom= "COMPUTATION_ENVIRONMENT",op = None,
50 # -----------------------------------------------------------------------
51 UIinfo = {"groupes": ("CACHE")},
52 # -----------------------------------
53 INITIALIZATION = FACT(statut='o',
54 # -----------------------------------
55 # -----------------------------------
56 TITLE = SIMP(statut ='o',
57 # -----------------------------------
60 fr = """Titre du cas etudie. Ce titre figurera sur les dessins.""",
61 ang = """Title of the case being considered. This title shall be marked on the
64 # -----------------------------------
65 INITIAL_CONDITIONS = SIMP(statut ='o',
66 # -----------------------------------
68 into = ['ZERO ELEVATION','CONSTANT ELEVATION','ZERO DEPTH','CONSTANT DEPTH','SPECIAL','PARTICULIERES','PARTICULAR','TPXO SATELLITE ALTIMETRY'],
69 defaut = 'ZERO ELEVATION',
70 fr = """Permet de definir les conditions initiales sur
72 Les valeurs possibles sont :
73 - COTE NULLE. Initialise la cote de surface libre a 0.
74 Les hauteurs d''eau initiales sont alors retrouvees en
75 faisant la difference entre les cotes de surface libre
77 - COTE CONSTANTE .Initialise la cote de surface libre a la
78 valeur donnee par le mot-cle COTE INITIALE. Les hauteurs
79 d''eau initiales sont calculees comme precedemment.
80 - HAUTEUR NULLE .Initialise les hauteurs d''eau a 0.
81 - HAUTEUR CONSTANTE. Initialise les hauteurs d''eau a la valeur
82 donnee par le mot-cle HAUTEUR INITIALE.
83 - PARTICULIERES. Les conditions initiales sur la hauteur d''eau
84 doivent etre precisees dans le sous-programme CONDIN.
85 - ALTIMETRIE SATELLITE TPXO. Les conditions initiales sur la hauteur
86 d''eau et les vitesses sont etiblies sur la base des donnees
87 satellite TPXO dont les 8 premiers constistuents
89 et sauves dans le fichier BASE DE DONNEES DE MAREE.""",
90 ang = """Makes it possible to define the initial conditions with
92 The possible values are as follows:
93 - ZERO ELEVATION-. Initializes the free surface elevation to 0.
94 The initial water depths are then found by computing the difference
95 between the free surface and the bottom.
96 - CONSTANT ELEVATION-. Initializes the water elevation to the value
97 given by the keyword -INITIAL ELEVATION-. The initial water depths
98 are computed as in the previous case.
99 - ZERO DEPTH-. Initializes the water depths to 0.
100 - CONSTANT DEPTH-. Initializes the water depths to the value given
101 by the key-word -INITIAL DEPTH-.
102 - SPECIAL-. The initial conditions with the water depth should be
103 stated in the CONDIN subroutine.
104 - TPXO SATELITE ALTIMETRY. The initial conditions on the
106 velocities are established from the TPXO satellite program data,
108 constituents of which are stored in the TIDE DATA BASE file.""",
110 # -----------------------------------
111 b_INITIAL_CONDITIONSG = BLOC(condition="INITIAL_CONDITIONS == 'CONSTANT ELEVATION'",
112 # -----------------------------------
113 # -----------------------------------
114 INITIAL_ELEVATION = SIMP(statut ='o',
115 # -----------------------------------
118 fr = """Valeur utilisee avec l''option :
119 CONDITIONS INITIALES - COTE CONSTANTE""",
120 ang = """Value to be used with the option :
121 INITIAL CONDITIONS -CONSTANT ELEVATION""",
124 # -----------------------------------
125 b_INITIAL_CONDITIONSH = BLOC(condition="INITIAL_CONDITIONS == 'CONSTANT DEPTH'",
126 # -----------------------------------
127 # -----------------------------------
128 INITIAL_DEPTH = SIMP(statut ='o',
129 # -----------------------------------
132 fr = """Valeur utilisee avec l''option :
133 CONDITIONS INITIALES :-HAUTEUR CONSTANTE-""",
134 ang = """Value to be used along with the option:
135 INITIAL CONDITIONS -CONSTANT DEPTH-""",
138 # -----------------------------------
139 BINARY_DATA_FILE_1_FORMAT = SIMP(statut ='f',
140 # -----------------------------------
142 into = ['BIN','SERAFIN','SERAFIND','MED'],
144 fr = """Format du fichier de geometrie.
145 Les valeurs possibles sont :
146 - BIN : format binaire standard
147 - SERAFIN : format standard simple precision pour Telemac;
148 - SERAFIND: format standard double precision pour Telemac;
149 - MED : format MED base sur HDF5""",
150 ang = """Geometry file format.
152 - BIN : Standard binary format
153 - SERAFIN : classical single precision format in Telemac;
154 - SERAFIND: classical double precision format in Telemac;
155 - MED : MED format based on HDF5""",
157 # -----------------------------------
158 BINARY_DATA_FILE_1 = SIMP(statut ='f',
159 # -----------------------------------
160 typ = ('Fichier','All Files (*)'),
162 fr = """Fichier de donnees code en binaire mis a la disposition
164 Les donnees de ce fichier seront a lire sur le canal 24.""",
165 ang = """Binary-coded data file made available to the user.
166 The data in this file shall be read on channel 24.""",
168 # -----------------------------------
169 BINARY_DATA_FILE_2_FORMAT = SIMP(statut ='f',
170 # -----------------------------------
172 into = ['BIN','SERAFIN','SERAFIND','MED'],
174 fr = """Format du fichier de geometrie.
175 Les valeurs possibles sont :
176 - BIN : format binaire standard
177 - SERAFIN : format standard simple precision pour Telemac;
178 - SERAFIND: format standard double precision pour Telemac;
179 - MED : format MED base sur HDF5""",
180 ang = """Geometry file format.
182 - BIN : Standard binary format
183 - SERAFIN : classical single precision format in Telemac;
184 - SERAFIND: classical double precision format in Telemac;
185 - MED : MED format based on HDF5""",
187 # -----------------------------------
188 BINARY_DATA_FILE_2 = SIMP(statut ='f',
189 # -----------------------------------
190 typ = ('Fichier','All Files (*)'),
192 fr = """Fichier de donnees code en binaire mis a la disposition
194 Les donnees de ce fichier seront a lire sur le canal 25.""",
195 ang = """Binary-coded data file made available to the user.
196 The data in this file shall be read on channel 25.""",
198 # -----------------------------------
199 FORMATTED_DATA_FILE_1 = SIMP(statut ='f',
200 # -----------------------------------
201 typ = ('Fichier','All Files (*)'),
203 fr = """Fichier de donnees formate mis a la disposition de
205 Les donnees de ce fichier seront a lire sur le canal 26.""",
206 ang = """Formatted data file made available to the user.
207 The data in this file shall be read on channel 26.""",
209 # -----------------------------------
210 FORMATTED_DATA_FILE_2 = SIMP(statut ='f',
211 # -----------------------------------
212 typ = ('Fichier','All Files (*)'),
214 fr = """Fichier de donnees formate mis a la disposition de
216 Les donnees de ce fichier seront a lire sur le canal 27.""",
217 ang = """Formatted data file made available to the user.
218 The data in this file shall be read on channel 27.""",
220 # -----------------------------------
221 INPUT_FILES = FACT(statut='o',
222 # -----------------------------------
223 # -----------------------------------
224 GEOMETRY_FILE_FORMAT = SIMP(statut ='o',
225 # -----------------------------------
227 into = ['SERAFIN','SERAFIND','MED'],
229 fr = """Format du fichier de geometrie.
230 Les valeurs possibles sont :
231 - SERAFIN : format standard simple precision pour Telemac;
232 - SERAFIND: format standard double precision pour Telemac;
233 - MED : format MED base sur HDF5""",
234 ang = """Geometry file format.
236 - SERAFIN : classical single precision format in Telemac;
237 - SERAFIND: classical double precision format in Telemac;
238 - MED : MED format based on HDF5""",
240 # -----------------------------------
241 GEOMETRY_FILE = SIMP(statut ='o',
242 # -----------------------------------
243 typ = ('Fichier','All Files (*)'),
244 fr = """Nom du fichier contenant le maillage du calcul a realiser.""",
245 ang = """Name of the file containing the mesh. This file may also
246 contain the topography and the friction coefficients.""",
248 # -----------------------------------
249 FORTRAN_FILE = SIMP(statut ='f',
250 # -----------------------------------
251 typ = 'FichierOuRepertoire',
253 fr = """Nom du fichier FORTRAN a soumettre.""",
254 ang = """Name of FORTRAN file to be submitted.""",
256 # -----------------------------------
257 BOTTOM_TOPOGRAPHY_FILE = SIMP(statut ='f',
258 # -----------------------------------
259 typ = ('Fichier','All Files (*)'),
261 fr = """Nom du fichier eventuel contenant la bathymetrie associee au
263 Si ce mot-cle est utilise; c''est cette bathymetrie qui sera utilisee
265 ang = """Name of the possible file containing the bathymetric data.
266 Where this keyword is used, these bathymetric data shall be used in
269 # -----------------------------------
270 BOTTOM_SMOOTHINGS = SIMP(statut ='o',
271 # -----------------------------------
274 fr = """Nombre de lissages effectues sur la topographie.
275 chaque lissage, effectue a l''aide d''une matrice de masse,
277 Utilise lorsque les donnees de bathymetrie donnent des resultats
278 trop irreguliers apres interpolation.""",
279 ang = """Number of smoothings on bottom topography.
280 each smoothing is mass conservative.
281 to be used when interpolation of bathymetry on the mesh gives
282 very rough results.""",
284 # -----------------------------------
285 BOUNDARY_CONDITIONS_FILE = SIMP(statut ='o',
286 # -----------------------------------
287 typ = ('Fichier','All Files (*)'),
288 fr = """Nom du fichier contenant les types de conditions aux limites.
289 Ce fichier est rempli de facon automatique par le mailleur au moyen de
290 couleurs affectees aux noeuds des frontieres du domaine de calcul.""",
291 ang = """Name of the file containing the types of boundary conditions.
292 This file is filled automatically by the mesh generator through
293 through colours that are assigned to the boundary nodes.""",
295 # -----------------------------------
296 VALIDATION = SIMP(statut ='f',
297 # -----------------------------------
300 fr = """Option utilisee principalement pour le dossier de validation. Le
301 fichier des resultats du calcul precedent est alors considere comme une
302 reference a laquelle on va comparer le calcul. La comparaison est
303 effectuee par le sous-programme VALIDA qui peut etre une comparaison
304 avec une solution exacte par exemple.""",
305 ang = """This option is primarily used for the validation documents. The
306 PREVIOUS COMPUTATION FILE is then considered as a reference which the
307 computation is going to be compared with. The comparison is made by the
308 subroutine VALIDA, which can be modified as to so as to include, for
309 example,a comparison with an exact solution.""",
311 # -----------------------------------
312 REFERENCE_FILE_FORMAT = SIMP(statut ='f',
313 # -----------------------------------
315 into = ['SERAFIN','SERAFIND','MED'],
317 fr = """Format du fichier de resultats du calcul precedent.
318 Les valeurs possibles sont :
319 - SERAFIN : format standard simple precision pour Telemac;
320 - SERAFIND: format standard double precision pour Telemac;
321 - MED : format MED base sur HDF5""",
322 ang = """Previous computation results file format.
324 - SERAFIN : classical single precision format in Telemac;
325 - SERAFIND: classical double precision format in Telemac;
326 - MED : MED format based on HDF5""",
328 # -----------------------------------
329 REFERENCE_FILE = SIMP(statut ='f',
330 # -----------------------------------
331 typ = ('Fichier','All Files (*)'),
333 fr = """Fichier de resultats de reference pour la validation. Les resultats a
334 placer dans ce fichier seront a ecrire sur le canal 22.""",
335 ang = """Binary-coded result file for validation. The results to be entered
336 into this file shall be written on channel 22.""",
339 # -----------------------------------
340 GLOBAL = FACT(statut='o',
341 # -----------------------------------
342 # -----------------------------------
343 PARALLEL_PROCESSORS = SIMP(statut ='f',
344 # -----------------------------------
347 fr = """NOMBRE DE PROCESSEURS EN CALCUL PARALLELE
348 0 : 1 machine, compilation sans bibliotheque de parallelisme
349 1 : 1 machine, compilation avec bibliotheque de parallelisme
350 2 : 2 processeurs ou machines en parallele
352 ang = """NUMBER OF PROCESSORS FOR PARALLEL PROCESSING
353 0 : 1 machine, compiling without parallel library
354 1 : 1 machine, compiling with a parallel library
355 2 : 2 processors or machines in parallel
358 # -----------------------------------
359 CHECKING_THE_MESH = SIMP(statut ='o',
360 # -----------------------------------
363 fr = """Si oui on appelle le sous-programme checkmesh qui verifie
364 la coherence du maillage, points superposes, etc.""",
365 ang = """if this key word is equal to yes, a call to subroutine
366 checkmesh will look for errors in the mesh, superimposed points, etc.""",
368 # -----------------------------------
369 MAXIMUM_NUMBER_OF_BOUNDARIES = SIMP(statut ='f',
370 # -----------------------------------
373 fr = """nombre maximal de frontieres differentes dans le maillage.
374 Sert au dimensionnement de la memoire, a augmenter si necessaire""",
375 ang = """maximal number of boundaries in the mesh.
376 Used for dimensioning arrays. Can be increased if needed""",
378 # -----------------------------------
379 MAXIMUM_NUMBER_OF_SOURCES = SIMP(statut ='f',
380 # -----------------------------------
383 fr = """nombre maximal de points sources dans le maillage.
384 Sert au dimensionnement de la memoire, a augmenter si necessaire""",
385 ang = """maximal number of punctual sources in the mesh.
386 Used for dimensioning arrays. Can be increased if needed""",
388 # -----------------------------------
389 MAXIMUM_NUMBER_OF_TRACERS = SIMP(statut ='f',
390 # -----------------------------------
393 fr = """nombre maximal de traceurs.
394 Sert au dimensionnement de la memoire, a augmenter si necessaire""",
395 ang = """maximal number of tracers.
396 Used for dimensioning arrays. Can be increased if needed""",
398 # -----------------------------------
399 VECTOR_LENGTH = SIMP(statut ='f',
400 # -----------------------------------
403 fr = """LONGUEUR DU VECTEUR POUR LES MACHINES VECTORIELLES""",
404 ang = """VECTOR LENGTH ON VECTOR MACHINES""",
408 # -----------------------------------
409 RESTART = FACT(statut='o',
410 # -----------------------------------
411 # -----------------------------------
412 COMPUTATION_CONTINUED = SIMP(statut ='o',
413 # -----------------------------------
416 fr = """Determine si le calcul en cours est independant de tout autre
417 resultat ou est une reprise effectuee a partir du resultat d''un calcul
419 NON : Il s''agit du premier passage pour ce calcul et il est necessaire
420 de definir un jeu complet de conditions initiales
421 OUI : Il s''agit d''une reprise de calcul :
422 les conditions initiales sont constituees par le dernier pas de
423 temps du ''FICHIER DU CALCUL PRECEDENT'' du fichier des parametres
424 utilise pour soumettre le calcul.
425 Par contre, l''ensemble des donnees du fichier des parametres
426 peuvent etre redefinies ; ce qui offre la possibilite de changer
427 par exemple, le pas de temps, le modele de turbulence, le
428 frottement, d''ajouter ou retirer un traceur ...
429 De meme, il est necessaire de definir des conditions aux limites
430 (sous-programme BORD ou valeurs placees dans le fichier des
431 parametres), qui peuvent egalement etre modifiees.""",
432 ang = """Determines whether the computation under way is independent
433 result or is following an earlier result.
434 NO: It is the first run for this computation and a whole set of
435 initial conditions should be defined.
436 YES: It follows a former computation:
437 the initial conditions consist in the last time step of the
438 PREVIOUS COMPUTATION FILE in the steering file used for submitting
440 All the data from the steering file may be defined once again, which
441 provides an opportunity to change, for example, the time step,
442 the turbulence model, the friction, to add or remove a tracer...
443 It is also possible to define new boundary conditions.""",
445 # -----------------------------------
446 b_COMPUTATION_CONTINUEDG = BLOC(condition="COMPUTATION_CONTINUED == True",
447 # -----------------------------------
448 # -----------------------------------
449 PREVIOUS_COMPUTATION_FILE_FORMAT = SIMP(statut ='o',
450 # -----------------------------------
452 into = ['SERAFIN','SERAFIND','MED'],
454 fr = """Format du fichier de resultats du calcul precedent.
455 Les valeurs possibles sont :
456 - SERAFIN : format standard simple precision pour Telemac;
457 - SERAFIND: format standard double precision pour Telemac;
458 - MED : format MED base sur HDF5""",
459 ang = """Previous computation results file format.
461 - SERAFIN : classical single precision format in Telemac;
462 - SERAFIND: classical double precision format in Telemac;
463 - MED : MED format based on HDF5""",
465 # -----------------------------------
466 PREVIOUS_COMPUTATION_FILE = SIMP(statut ='o',
467 # -----------------------------------
468 typ = ('Fichier','All Files (*)'),
470 fr = """Nom d''un fichier contenant les resultats d''un calcul
471 precedent realise sur le meme maillage et dont le dernier pas de temps
472 enregistre va fournir les conditions initiales pour une suite de de
474 ang = """Name of a file containing the results of an earlier
475 computation which was made on the same mesh. The last recorded time
476 step will provid the initial conditions for the new computation.""",
478 # -----------------------------------
479 RECORD_NUMBER_FOR_RESTART = SIMP(statut ='o',
480 # -----------------------------------
483 fr = """En cas de suite de calcul, numero de l''enregistrement
484 de depart dans le fichier du calcul precedent. 0 signifie
485 qu''on prend le dernier enregistrement""",
486 ang = """In case of COMPUTATION CONTINUED, record number to
487 start from in the PREVIOUS COMPUTATION FILE""",
490 # -----------------------------------
491 INITIAL_TIME_SET_TO_ZERO = SIMP(statut ='o',
492 # -----------------------------------
495 fr = """Remet le temps a zero en cas de suite de calcul""",
496 ang = """Initial time set to zero in case of restart""",
499 # -----------------------------------
500 OUTPUT_FILES = FACT(statut='o',
501 # -----------------------------------
502 # -----------------------------------
503 RESULTS_FILES = FACT(statut='o',
504 # -----------------------------------
505 # -----------------------------------
506 NUMBER_OF_FIRST_TIME_STEP_FOR_GRAPHIC_PRINTOUTS = SIMP(statut ='o',
507 # -----------------------------------
510 fr = """Determine le nombre de pas de temps a partir duquel debute
511 l''ecriture des resultats dans le FICHIER DES RESULTATS.""",
512 ang = """Determines the number of time steps after which the results
513 are first written into the RESULTS FILE.""",
515 # -----------------------------------
516 GRAPHIC_PRINTOUT_PERIOD = SIMP(statut ='o',
517 # -----------------------------------
520 fr = """ Determine la periode en nombre de pas de temps d''impression des
521 VARIABLES POUR LES SORTIES GRAPHIQUES (voir ce mot-cle) dans le FICHIER
523 ang = """ Determines, in number of time steps, the printout period for the
524 VARIABLES FOR GRAPHIC PRINTOUTS in the RESULTS FILE.""",
526 # -----------------------------------
527 VARIABLES_FOR_GRAPHIC_PRINTOUTS = SIMP(statut ='o',
528 # -----------------------------------
529 typ = 'TXM', min=0, max='**',
530 into = ["velocity along x axis (m/s)","velocity along y axis (m/s)","wave celerity (m/s)","water depth (m)","free surface elevation (m)","bottom elevation (m)","Froude number","scalar flowrate of fluid (m2/s)","tracer 1 etc.","All the tracers 1 to 9.","All the tracers 10 to 19.","turbulent kinetic energy in k-epsilon model (J/kg)","dissipation of turbulent energy (W/kg)","turbulent viscosity (m2/s)","flowrate along x axis (m2/s)","flowrate along y axis (m2/s)","scalar velocity (m/s)","wind along x axis (m/s)","wind along y axis (m/s)","air pressure (Pa)","friction coefficient","drift along x (m)","drift along y (m)","Courant number ","supplementary variable N","supplementary variable O","supplementary variable R","supplementary variable Z","maximum elevation","time of maximum elevation","maximum velocity","time of maximum velocity","friction velocity","gradient 1, etc. "],
531 defaut = ["velocity along x axis (m/s)","velocity along y axis (m/s)","water depth (m)","bottom elevation (m)"],
532 fr = """ Noms des variables que l''utilisateur veut ecrire dans le fichier des
533 resultats. Chaque variable est representee par une lettre. Le choix des
534 separateurs est libre. Les possibilites offertes sont les suivantes :
535 - U : vitesse suivant l''axe des x (m/s),
536 - V : vitesse suivant l''axe des y (m/s),
537 - C : celerite des ondes (m/s),
538 - H : hauteur d''eau (m),
539 - S : cote de surface libre (m),
540 - B : cote du fond (m),
541 - F : nombre de Froude,
542 - Q : debit scalaire du fluide (m2/s),
543 - Tn: traceur, avec n le numero du traceur,
544 - K : energie turbulente du modele k-epsilon (J/kg),
545 - E : dissipation de l''energie turbulente (W/kg),
546 - D : viscosite turbulente du modele k-epsilon (m2/s),
547 - I : debit suivant l''axe des x (m2/s),
548 - J : debit suivant l''axe des y (m2/s),
549 - M : vitesse scalaire (m/s),
550 - X : vent suivant l''axe des x (m/s),
551 - Y : vent suivant l''axe des y (m/s),
552 - P : pression atmospherique (Pa),
553 - W : coefficient de frottement sur le fond,
554 - A : derive en x (m),
555 - G : derive en y (m),
556 - L : coefficient de frottement sur le fond,
557 - Gn: gradient differencie, avec n le numero de reference du gradient.
558 L''utilisateur dispose egalement de 4 champs libres, qu''il peut
559 utiliser pour ecrire dans le fichier des resultats des variables qu''il
560 cree lui-meme. Ces variables propres a l''utlisateur doivent etre
561 calculees dans le sous-programme PRERES et le nom que l''on desire leur
562 donner doit etre ecrit dans le sous-programme NOMVAR. Ces 7 champs sont
564 - N, O, R, Z qui correspondent aux tableaux PRIVE(1,1), PRIVE(1,2),
565 PRIVE(1,3), PRIVE(1,4).
566 A la difference des variables precedentes, celles-ci sont conservees
567 dans tout le programme, et peuvent donc etre reutilisees. Dans ce
568 dernier cas ne pas oublier de donner une taille suffisante au tableau
569 PRIVE (dans le programme principal). Il est ainsi possible de limiter,
570 par exemple, la taille des fichiers de resultats pour de tres gros
571 calculs. Cependant, il faut etre conscient du fait que, dans
572 l''eventualite d''une reprise de calcul, le code doit disposer, dans le
573 fichier des resultats, des informations necessaires a sa poursuite, a
575 - les vitesses U et V,
576 - les hauteurs d''eau H,
577 - les cotes du fond B.
578 Toutefois, TELEMAC peut recalculer certaines de ces variables a
579 partir d''autres qui lui seront fournies (par exemple, il recalculera H
580 a partir de S et B).""",
581 ang = """ Names of variables the user wants to write into the results file. Each
582 variable is represented by a letter. The separators can be freely
583 selected. The available capabilities are as follows:
584 - U : velocity along x axis (m/s),
585 - V : velocity along y axis (m/s),
586 - C : wave celerity (m/s),
587 - H : water depth (m),
588 - S : free surface elevation (m),
589 - B : bottom elevation (m),
591 - Q : scalar flowrate of fluid (m2/s),
592 - Tn : tracer, with n the tracer number,
593 - K : turbulent kinetic energy in k-epsilon model (J/kg),
594 - E : dissipation of turbulent energy (W/kg),
595 - D : turbulent viscosity of k-epsilon model (m2/s),
596 - I : flowrate along x axis (m2/s),
597 - J : flowrate along y axis (m2/s),
598 - M : scalar velocity (m/s),
599 - X : wind along x axis (m/s) Y : wind along y axis (m/s),
600 - P : air pressure (Pa),
601 - W : friction coefficient ,
604 - L : nombre de courant,
605 - Gn : differentiated gradient, with n the gradient reference number.
606 Four other variables are also made available to the
607 user who may use them for writing into the file the results of variables
608 he creates himself. These user-specific variables should be computed in
609 the subroutine PRERES and their desired name should be written into the
610 subroutine NOMVAR. These seven variables are as follows:
612 which correspond to arrays PRIVE(1,1) up to PRIVE(1, Unlike the
613 preceding variables, they are preserved throughout the program, so that
614 they can be used again.
615 In the latter case, do not forget to provide the
616 array PRIVE with sufficiently large dimensions (in FORTRAN file). With
617 this key-word, one can limit the size of the RESULTS FILE. It should be
618 kept in mind, however, that if a computation has to be continued, the
619 RESULTS FILE should contain the appropriate information for running the
621 - velocities U and V,
623 - bottom elevations B.
624 TELEMAC, however, can compute some of these variables from others for
625 example, it will compute H from S and B.""",
627 # -----------------------------------
628 NUMBER_OF_PRIVATE_ARRAYS = SIMP(statut ='o',
629 # -----------------------------------
632 fr = """Nombre de tableaux mis a disposition de l utilisateur""",
633 ang = """Number of arrays for own user programming""",
635 # -----------------------------------
636 NAMES_OF_PRIVATE_VARIABLES = SIMP(statut ='f',
637 # -----------------------------------
638 typ = 'TXM', min=0, max='**',
639 fr = """Noms des variables privees en 32 caracteres, 16 pour le nom
640 16 pour l''unite. Elles correspondent au bloc PRIVE
641 et peuvent etre lues dans le fichier de geometrie si elles
642 y sont presentes avec leur nom""",
643 ang = """Name of private variables in 32 characters, 16 for the name,
644 16 for the unit. They are stored in the block PRIVE and
645 can be read in the geometry file if they are here with their
648 # -----------------------------------
649 RESULTS_FILE_FORMAT = SIMP(statut ='o',
650 # -----------------------------------
652 into = ['SERAFIN','SERAFIND','MED'],
654 fr = """Format du fichier de resultats.
655 Les valeurs possibles sont :
656 - SERAFIN : format standard simple precision pour Telemac;
657 - SERAFIND: format standard double precision pour Telemac;
658 - MED : format MED base sur HDF5""",
659 ang = """Results file format. Possible values are:
660 - SERAFIN : classical single precision format in Telemac;
661 - SERAFIND: classical double precision format in Telemac;
662 - MED : MED format based on HDF5""",
664 # -----------------------------------
665 RESULTS_FILE = SIMP(statut ='o',
666 # -----------------------------------
667 typ = ('Fichier','All Files (*)','Sauvegarde'),
669 fr = """Nom du fichier dans lequel seront ecrits les resultats du
670 calcul avec la periodicite donnee par le mot cle ''PERIODE POUR LES
671 SORTIES GRAPHIQUES''.""",
672 ang = """Name of the file into which the computation results shall be
674 the periodicity being given by the key-word:
675 GRAPHIC PRINTOUT PERIOD.""",
677 # -----------------------------------
678 BINARY_RESULTS_FILE_FORMAT = SIMP(statut ='f',
679 # -----------------------------------
681 into = ['BIN','SERAFIN','SERAFIND','MED'],
683 fr = """Format du fichier de geometrie.
684 Les valeurs possibles sont :
685 - SERAFIN : format standard simple precision pour Telemac;
686 - SERAFIND: format standard double precision pour Telemac;
687 - MED : format MED base sur HDF5""",
688 ang = """Geometry file format.
690 - SERAFIN : classical single precision format in Telemac;
691 - SERAFIND: classical double precision format in Telemac;
692 - MED : MED format based on HDF5""",
694 # -----------------------------------
695 BINARY_RESULTS_FILE = SIMP(statut ='f',
696 # -----------------------------------
697 typ = ('Fichier','All Files (*)','Sauvegarde'),
699 fr = """Fichier de resultats code en binaire mis a la disposition
700 de l''utilisateur. Les resultats a placer dans ce fichier seront a
701 ecrire sur le canal 28.""",
702 ang = """Additional binary-coded result file made available
703 to the user. The results to be entered into this file shall be written
706 # -----------------------------------
707 FORMATTED_RESULTS_FILE = SIMP(statut ='f',
708 # -----------------------------------
709 typ = ('Fichier','All Files (*)','Sauvegarde'),
711 fr = """Fichier de resultats formate mis a la disposition de
713 Les resultats a placer dans ce fichier seront a ecrire sur
715 ang = """Formatted file of results made available to the user.
716 The results to be entered into this file shall be written
720 # -----------------------------------
721 CONTROL_SECTION = FACT(statut='f',
722 # -----------------------------------
723 # -----------------------------------
724 CONTROL_SECTIONS = SIMP(statut ='f',
725 # -----------------------------------
726 typ = 'I', min=0, max='**',
727 fr = """Couples de points (numeros globaux dans le maillage) entre
728 lesquels les debits instantanes et cumules seront donnes.""",
729 ang = """Couples of points (global numbers
730 in the mesh) defining sections
731 where the instantaneous and cumulated discharges will be given""",
733 # -----------------------------------
734 PRINTING_CUMULATED_FLOWRATES = SIMP(statut ='o',
735 # -----------------------------------
738 fr = """IMPRESSION DU FLUX CUMULE A TRAVERS LES SECTIONS DE CONTROLE""",
739 ang = """PRINTING THE CUMULATED FLOWRATES THROUGH CONTROL SECTIONS""",
741 # -----------------------------------
742 COMPATIBLE_COMPUTATION_OF_FLUXES = SIMP(statut ='o',
743 # -----------------------------------
746 fr = """FLUX A TRAVERS LES SECTIONS DE CONTROLE, CALCUL COMPATIBLE
747 AVEC L''IMPERMEABILITE SOUS FORME FAIBLE""",
748 ang = """FLOWRATES THROUGH CONTROL SECTIONS, COMPUTATION COMPATIBLE
749 WITH THE WEAK FORMULATION OF NO-FLUX BOUNDARY CONDITION""",
751 # -----------------------------------
752 SECTIONS_INPUT_FILE = SIMP(statut ='f',
753 # -----------------------------------
754 typ = ('Fichier','All Files (*)'),
756 fr = """sections input file, partitioned""",
757 ang = """sections input file, partitioned""",
759 # -----------------------------------
760 SECTIONS_OUTPUT_FILE = SIMP(statut ='f',
761 # -----------------------------------
762 typ = ('Fichier','All Files (*)','Sauvegarde'),
764 fr = """sections output file, written by the master""",
765 ang = """sections output file, written by the master""",
767 # -----------------------------------
768 FLUXLINE = SIMP(statut ='f',
769 # -----------------------------------
773 ang = """Use Fluxline to compute flux over lines""",
775 # -----------------------------------
776 FLUXLINE_INPUT_FILE = SIMP(statut ='f',
777 # -----------------------------------
778 typ = ('Fichier','All Files (*)'),
780 fr = """Nom du fichier de fluxline, avec des donnees sur les sections""",
781 ang = """Name of the Fluxline file, with data on cross-sections""",
784 # -----------------------------------
785 LISTING = FACT(statut='o',
786 # -----------------------------------
787 # -----------------------------------
788 NUMBER_OF_FIRST_TIME_STEP_FOR_LISTING_PRINTOUTS = SIMP(statut ='f',
789 # -----------------------------------
792 fr = """Determine le nombre de pas de temps a partir duquel debute
793 l''ecriture des resultats dans le listing.""",
794 ang = """Determines the number of time steps after which the results
795 are first written into the listing.""",
797 # -----------------------------------
798 LISTING_PRINTOUT_PERIOD = SIMP(statut ='o',
799 # -----------------------------------
802 fr = """ Determine la periode en nombre de pas de temps d''impression des
803 VARIABLES A IMPRIMER (voir ce mot-cle) Pour la mise au point, il faut
804 savoir que la sortie des resultats est effectuee systematiquement sur le
805 fichier de retour d''execution du code (actuellement accessible par le
806 menu 3.f de SPF sur IBM, et dans le fichier !CAS.SORTIE sur station de
808 ang = """ Determines, in number of time steps, the printout period of the
809 VARIABLES TO BE PRINTED The results are systematically printed out on
810 the listing file (file CAS.SORTIE at the workstation).""",
812 # -----------------------------------
813 LISTING_FOR_PRINTOUT_PERIOD = SIMP(statut ='f',
814 # -----------------------------------
817 fr = """Determine la periode en nombre de pas de temps d''impression
818 des VARIABLES A IMPRIMER (voir ce mot-cle) Pour la mise au point,
819 il faut savoir que la sortie des resultats est effectuee
820 systematiquement sur le fichier de retour d''execution du code
821 (actuellement accessible par le menu 3.f de SPF sur IBM, et dans
822 le fichier !CAS.SORTIE sur station de travail)""",
823 ang = """Determines, in number of time steps, the printout period of
824 the VARIABLES TO BE PRINTED
825 The results are systematically printed out on the listing file
826 (file CAS.SORTIE at the workstation).""",
828 # -----------------------------------
829 LISTING_PRINTOUT = SIMP(statut ='o',
830 # -----------------------------------
833 fr = """Sortie des resultats sur support papier.
834 Si l''on met NON le listing ne contient que l''entete et la mention
835 FIN NORMALE DU PROGRAMME
836 Commande a eviter""",
837 ang = """Result printout on hard copy.
838 When NO is selected, the listing only includes the heading and the
839 phrase "NORMAL END OF PROGRAM"
840 In addition, the options MASS BALANCE and VALIDATION are inhibited.
841 Not recommended for use.""",
843 # -----------------------------------
844 VARIABLES_TO_BE_PRINTED = SIMP(statut ='f',
845 # -----------------------------------
846 typ = 'TXM', min=0, max='**',
847 intoSug = ["velocity along x axis (m/s)","velocity along y axis (m/s)","wave celerity (m/s)","water depth (m)","free surface elevation (m)","bottom elevation (m)","Froude number","scalar flowrate of fluid (m2/s)","tracer 1, etc.","turbulent kinetic energy in k-epsilon model (J/kg)","dissipation of turbulent energy (W/kg)","turbulent viscosity of k-epsilon model (m2/s)","flowrate along x axis (m2/s)","flowrate along y axis (m2/s)","scalar velocity (m/s)","wind along x axis (m/s)","wind along y axis (m/s)","air pressure (Pa)","friction coefficient","drift along x (m)","drift along y (m)","nombre de courants ","supplementary variable N","supplementary variable O","supplementary variable R","supplementary variable Z","gradient 1, etc."],
849 fr = """Nom des variables que l''utilisateur desire ecrire a l''ecran. Meme
850 possibilites que pour les sorties graphiques.""",
851 ang = """Name of the variables that the user wants printed on screen.
852 Same values available as graphical outputs""",
854 # -----------------------------------
855 MASS_BALANCE = SIMP(statut ='o',
856 # -----------------------------------
859 fr = """Determine si l''on effectue ou non le bilan de masse
861 Cette procedure calcule a chaque pas de temps :
862 - les flux aux entrees et sorties du domaine;
863 - le flux global a travers l''ensemble des parois du domaine (liquides
865 - l''erreur relative sur la masse pour ce pas de temps.
866 En fin de listing, on trouve l''erreur relative sur la masse pour
867 l''ensemble du calcul.
868 Il ne s''agit que d''un calcul indicatif car il n''existe pas
869 d''expression compatible du debit en formulation c,u,v.""",
870 ang = """Determines whether a check of the mass-balance over
871 the domain is mader or not.
872 This procedures computes the following at each time step:
873 the domain inflows and outflows,
874 the overall flow across all the boundaries,
875 the relative error in the mass for that time step.
876 The relative error in the mass over the whole computation can be found
877 at the end of the listing.""",
879 # -----------------------------------
880 INFORMATION_ABOUT_SOLVER = SIMP(statut ='f',
881 # -----------------------------------
884 fr = """Donne a chaque pas de temps le nombre d''iterations necessaires
885 a la convergence du solveur de l''etape de propagation.""",
886 ang = """if YES, prints the number of iterations
887 that have been necessar
888 to get the solution of the linear system.""",
890 # -----------------------------------
891 LIST_OF_POINTS = SIMP(statut ='f',
892 # -----------------------------------
893 typ = 'I', min=0, max='**',
894 fr = """Liste de points remarquables pour les impressions""",
895 ang = """List of remarkable points for printouts""",
897 # -----------------------------------
898 NAMES_OF_POINTS = SIMP(statut ='f',
899 # -----------------------------------
900 typ = 'TXM', min=0, max='**',
901 fr = """Noms des points remarquables pour les impressions""",
902 ang = """Names of remarkable points for printouts""",
905 # -----------------------------------
906 FOURIER = FACT(statut='f',
907 # -----------------------------------
908 # -----------------------------------
909 FOURIER_ANALYSIS_PERIODS = SIMP(statut ='o',
910 # -----------------------------------
911 typ = 'R', min=0, max='**',
912 fr = """Liste des periodes que l''on veut analyser""",
913 ang = """List of periods to be analysed""",
915 # -----------------------------------
916 TIME_RANGE_FOR_FOURIER_ANALYSIS = SIMP(statut ='o',
917 # -----------------------------------
918 typ = 'R', min= 2, max= 2,
920 fr = """Pour le calcul du marnage et de la phase de la maree""",
921 ang = """For computing tidal range and phase of tide""",
926 # -----------------------------------------------------------------------
927 HYDRO = PROC(nom= "HYDRO",op = None,
928 # -----------------------------------------------------------------------
929 UIinfo = {"groupes": ("CACHE")},
930 # -----------------------------------
931 BOUNDARY_CONDITIONS = FACT(statut='o',
932 # -----------------------------------
933 # -----------------------------------
934 PRESCRIBED_ELEVATIONS = SIMP(statut ='f',
935 # -----------------------------------
937 fr = """Valeurs des cotes imposees aux frontieres liquides entrantes.
938 Lire la partie du mode d''emploi consacree aux conditions aux limites""",
939 ang = """Values of prescribed elevations at the inflow boundaries.
940 The section about boundary conditions is to be read in the manual""",
942 # -----------------------------------
943 PRESCRIBED_FLOWRATES = SIMP(statut ='f',
944 # -----------------------------------
946 fr = """Valeurs des debits imposes aux frontieres liquides entrantes.
947 Lire la partie du mode d''emploi consacree aux conditions aux limites""",
948 ang = """Values of prescribed flowrates at the inflow boundaries.
949 The section about boundary conditions is to be read in the manual""",
951 # -----------------------------------
952 PRESCRIBED_VELOCITIES = SIMP(statut ='f',
953 # -----------------------------------
955 fr = """Valeurs des vitesses imposees aux frontieres liquides entrantes.
956 Lire la partie du mode d''emploi consacree aux conditions aux limites""",
957 ang = """Values of prescribed velocities at the liquid inflow boundaries.
958 Refer to the section dealing with the boundary conditions""",
961 # -----------------------------------
962 BOUNDARY_CONDITIONS_OTHERS = FACT(statut='o',
963 # -----------------------------------
964 # -----------------------------------
965 STAGE_DISCHARGE_CURVES = SIMP(statut ='f',
966 # -----------------------------------
967 typ = 'TXM', max='**',
968 into = ["no","Z(Q)","Q(Z) not programmed"],
969 fr = """Indique si une courbe de tarage doit etre utilisee pour une frontiere
970 0:non 1:Z(Q) 2: Q(Z) (2 non programme)""",
971 ang = """Says if a discharge-elevation curve must be used for a given boundary
972 0:NO 1:Z(Q) 2: Q(Z) (2 not programmed)""",
974 # -----------------------------------
975 b_STAGE_DISCHARGE_CURVESG = BLOC(condition="STAGE_DISCHARGE_CURVES != 'no'",
976 # -----------------------------------
977 # -----------------------------------
978 STAGE_DISCHARGE_CURVES_FILE = SIMP(statut ='f',
979 # -----------------------------------
980 typ = ('Fichier','All Files (*)'),
982 fr = """Nom du fichier contenant les courbes de tarage""",
983 ang = """Name of the file containing stage-discharge curves""",
986 # -----------------------------------
987 VELOCITY_PROFILES = SIMP(statut ='f',
988 # -----------------------------------
989 typ = 'TXM', min=0, max='**',
990 into = ["constant normal profile","u and v given in the conlim file","normal velocity given in ubor in the conlim file","velocity proportional to square root of depth","velocity proportional to square root of depth, variant"],
991 fr = """1:profil normal constant 2:u et v
992 donnes dans le fichier conlim
993 3:vitesse normale donnee dans ubor dans le fichier conlim
994 4:profil en racine de la profondeur
995 5:profil en racine de la profondeur, variante""",
996 ang = """1:constant normal profile 2:u and v given in the conlim file
997 3:normal velocity given in ubor in the conlim file
998 4:sqrt(depth) profile
999 5:sqrt(depth) profile, variant""",
1001 # -----------------------------------
1002 OPTION_FOR_LIQUID_BOUNDARIES = SIMP(statut ='f',
1003 # -----------------------------------
1004 typ = 'TXM', max='**',
1005 into = ["classical","Thompson method based on characteristics"],
1006 fr = """On donne 1 entier par frontiere liquide
1007 1 : conditions aux limites classiques
1008 2 : methode de Thompson avec calcul de caracteristiques""",
1009 ang = """One integer per liquid boundary is given
1010 1 : classical boundary conditions
1011 2 : Thompson method based on characteristics""",
1013 # -----------------------------------
1014 LIQUID_BOUNDARIES_FILE = SIMP(statut ='f',
1015 # -----------------------------------
1016 typ = ('Fichier','All Files (*)'),
1018 fr = """Fichier de variations en temps des conditions aux limites.
1019 Les donnees de ce fichier seront a lire sur le canal 12.""",
1020 ang = """Variations in time of boundary conditions.
1021 Data of this file are read
1024 # -----------------------------------
1025 ELEMENTS_MASKED_BY_USER = SIMP(statut ='o',
1026 # -----------------------------------
1029 fr = """SI OUI REMPLIR LE SOUS-PROGRAMME MASKOB""",
1030 ang = """IF YES REWRITE SUBROUTINE MASKOB""",
1032 # -----------------------------------
1033 b_ELEMENTS_MASKED_BY_USERG = BLOC(condition="ELEMENTS_MASKED_BY_USER == True",
1034 # -----------------------------------
1035 # -----------------------------------
1036 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
1037 # -----------------------------------
1038 defaut = "Rewrite subroutine maskob"),
1041 # -----------------------------------
1042 PHYSICAL_PARAMETERS_HYDRO = FACT(statut='o',
1043 # -----------------------------------
1044 # -----------------------------------
1045 FRICTION = FACT(statut='o',
1046 # -----------------------------------
1047 # -----------------------------------
1048 MAXIMUM_NUMBER_OF_FRICTION_DOMAINS = SIMP(statut ='o',
1049 # -----------------------------------
1052 fr = """nombre maximal de zones pouvant etre definies pour le
1053 frottement. Peut etre augmente si necessaire""",
1054 ang = """maximal number of zones defined for the friction.
1055 Could be increased if needed""",
1057 # -----------------------------------
1058 FRICTION_DATA = SIMP(statut ='f',
1059 # -----------------------------------
1062 fr = """Lois de frottements definies par zone""",
1063 ang = """Friction law defined by area""",
1065 # -----------------------------------
1066 FRICTION_DATA_FILE = SIMP(statut ='f',
1067 # -----------------------------------
1068 typ = ('Fichier','All Files (*)'),
1070 fr = """fichier de donnees pour le frottement""",
1071 ang = """friction data file""",
1073 # -----------------------------------
1074 LAW_OF_BOTTOM_FRICTION = SIMP(statut ='o',
1075 # -----------------------------------
1077 into = ["NO FRICTION","HAALAND","CHEZY","STRICKLER","MANNING","NIKURADSE"],
1078 fr = """ selectionne le type de formulation utilisee pour le calcul du
1079 frottement sur le fond. Les lois possibles sont les suivantes (cf. Note
1080 de principe) : - 0 : pas de frottement sur le fond; 1 : formule de
1081 Haaland 2 : formule de Chezy 3 : formule de STRICKLER 4 : formule de
1082 MANNING 5 : formule de NIKURADSE""",
1083 ang = """ Selects the type of formulation used for the bottom friction. The
1084 possible laws are as follows (refer to the Principle note): 0: no
1085 friction against bottom, 1: Haaland''s formula 2: CHEZY''s formula 3:
1086 STRICKLER''s formula 4: MANNING''s formula 5: NIKURADSE''s formula""",
1088 # -----------------------------------
1089 b_LAW_OF_BOTTOM_FRICTIONG = BLOC(condition="LAW_OF_BOTTOM_FRICTION != 'NO FRICTION'",
1090 # -----------------------------------
1091 # -----------------------------------
1092 FRICTION_COEFFICIENT = SIMP(statut ='o',
1093 # -----------------------------------
1096 fr = """Fixe la valeur du coefficient de frottement pour la
1097 formulation choisie.
1098 Attention; la signification de ce chiffre varie suivant la formule
1100 1 : coefficient lineaire
1101 2 : coefficient de Chezy
1102 3 : coefficient de Strickler
1103 4 : coefficient de Manning
1104 5 : hauteur de rugosite de Nikuradse""",
1105 ang = """Sets the value of the friction coefficient for the selected
1106 formulation. It is noteworthy that the meaning of this figure changes
1107 according to the selected formula (Chezy, Strickler, etc.) :
1108 1 : linear coefficient
1109 2 : Chezy coefficient
1110 3 : Strickler coefficient
1111 4 : Manning coefficient
1112 5 : Nikuradse grain size""",
1115 # -----------------------------------
1116 MANNING_DEFAULT_VALUE_FOR_COLEBROOK_WHITE_LAW = SIMP(statut ='o',
1117 # -----------------------------------
1120 fr = """valeur par defaut du manning pour la loi de frottement de
1121 Colebrook-White (loi numero 7)""",
1122 ang = """Manning default value for the friction law of Colebrook-White
1125 # -----------------------------------
1126 DEPTH_IN_FRICTION_TERMS = SIMP(statut ='o',
1127 # -----------------------------------
1129 into = ["nodal","average"],
1131 fr = """1 : nodale 2 : moyenne""",
1132 ang = """1: nodal 2: average""",
1134 # -----------------------------------
1135 NON_SUBMERGED_VEGETATION_FRICTION = SIMP(statut ='o',
1136 # -----------------------------------
1139 fr = """calcul du frottement du a la vegetation non submergee""",
1140 ang = """friction calculation of the non-submerged vegetation""",
1142 # -----------------------------------
1143 b_NON_SUBMERGED_VEGETATION_FRICTIONG = BLOC(condition="NON_SUBMERGED_VEGETATION_FRICTION == True",
1144 # -----------------------------------
1145 # -----------------------------------
1146 DIAMETER_OF_ROUGHNESS_ELEMENTS = SIMP(statut ='o',
1147 # -----------------------------------
1150 fr = """diametre des elements de frottements""",
1151 ang = """diameter of roughness element""",
1153 # -----------------------------------
1154 SPACING_OF_ROUGHNESS_ELEMENTS = SIMP(statut ='o',
1155 # -----------------------------------
1158 fr = """espacement des elements de frottement""",
1159 ang = """spacing of rouhness element""",
1162 # -----------------------------------
1163 LAW_OF_FRICTION_ON_LATERAL_BOUNDARIES = SIMP(statut ='o',
1164 # -----------------------------------
1166 into = ["NO FRICTION","HAALAND","CHEZY","STRICKLER","MANNING","NIKURADSE","LOG LAW","COLEBROOK-WHITE"],
1167 defaut = "NO FRICTION",
1168 fr = """selectionne le type de formulation utilisee pour le calcul
1169 du frottement sur les parois laterales.
1170 Les lois possibles sont les suivantes (cf. Note de principe) :
1171 0 : pas de frottement
1176 5 : formule de NIKURADSE
1178 7 : Colebrook-White""",
1179 ang = """Selects the type of formulation used
1180 for the friction on lateral boundaries.
1181 The possible laws are as follows (refer to the Principle note):
1187 5: NIKURADSE''s formula
1189 7 : Colebrook-White""",
1191 # -----------------------------------
1192 b_LAW_OF_FRICTION_ON_LATERAL_BOUNDARIESG = BLOC(condition="LAW_OF_FRICTION_ON_LATERAL_BOUNDARIES != 'NO FRICTION'",
1193 # -----------------------------------
1194 # -----------------------------------
1195 ROUGHNESS_COEFFICIENT_OF_BOUNDARIES = SIMP(statut ='o',
1196 # -----------------------------------
1199 fr = """Fixe la valeur du coefficient de frottement sur les frontieres
1200 solides avec un regime turbulent rugueux sur les bords du domaine.
1201 meme convention que pour le coefficient de frottement:
1203 2 : coefficient de Chezy
1204 3 : coefficient de Strickler
1205 4 : coefficient de Manning
1206 5 : hauteur de rugosite de Nikuradse""",
1207 ang = """Sets the value of the friction coefficient of the solid
1208 boundary with the bed roughness option. Same meaning than friction
1212 # -----------------------------------
1213 DEFINITION_OF_ZONES = SIMP(statut ='o',
1214 # -----------------------------------
1217 fr = """Declenche l''appel a def\_zones, pour donner
1218 un numero de zone a chaque point""",
1219 ang = """Triggers the call to def\_zones to give a zone number to every point""",
1221 # -----------------------------------
1222 b_DEFINITION_OF_ZONESG = BLOC(condition="DEFINITION_OF_ZONES == True",
1223 # -----------------------------------
1224 # -----------------------------------
1225 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
1226 # -----------------------------------
1227 defaut = "Rewrite subroutine def_zones"),
1229 # -----------------------------------
1230 ZONES_FILE = SIMP(statut ='f',
1231 # -----------------------------------
1232 typ = ('Fichier','All Files (*)'),
1234 fr = """Fichier des zones avec sur chaque ligne
1235 numero de point numero de zone""",
1236 ang = """Zones file, with on every line:
1237 point number zone number""",
1240 # -----------------------------------
1241 METEOROLOGY = FACT(statut='f',
1242 # -----------------------------------
1243 # -----------------------------------
1244 WIND = SIMP(statut ='o',
1245 # -----------------------------------
1248 fr = """Prise en compte ou non des effets du vent.""",
1249 ang = """Determines whether the wind effects are to be taken into
1252 # -----------------------------------
1253 b_WINDG = BLOC(condition="WIND == True",
1254 # -----------------------------------
1255 # -----------------------------------
1256 WIND_VELOCITY_ALONG_X = SIMP(statut ='o',
1257 # -----------------------------------
1260 fr = """Composante de la vitesse du vent suivant l''axe des x (m/s).""",
1261 ang = """Wind velocity, component along x axis (m/s).""",
1263 # -----------------------------------
1264 WIND_VELOCITY_ALONG_Y = SIMP(statut ='o',
1265 # -----------------------------------
1268 fr = """Composante de la vitesse du vent suivant l''axe des y (m/s).""",
1269 ang = """Wind velocity, component along y axis (m/s).""",
1271 # -----------------------------------
1272 THRESHOLD_DEPTH_FOR_WIND = SIMP(statut ='o',
1273 # -----------------------------------
1276 fr = """Retire la force due au vent dans les petites profondeurs""",
1277 ang = """Wind is not taken into account for small depths""",
1279 # -----------------------------------
1280 COEFFICIENT_OF_WIND_INFLUENCE = SIMP(statut ='o',
1281 # -----------------------------------
1284 fr = """Fixe la valeur du coefficient d''entrainement du vent (cf.
1285 Note de principe).""",
1286 ang = """Sets the value of the wind driving coefficient.
1287 Refer to principle note.""",
1289 # -----------------------------------
1290 OPTION_FOR_WIND = SIMP(statut ='o',
1291 # -----------------------------------
1293 into = ["constant in time and space","variable in time given by formated file","variable in time and space given by formated file"],
1294 defaut = "constant in time and space",
1295 fr = """donne les options pour introduire le vent:
1296 1: constant en temps et en espace (donne par le mot cle
1297 VITESSE ET DIRECTION DU VENT)
1298 2: variable en temps donne par fichier formate
1299 3: variable en temps et en espace donne par fichier formate
1300 ou un fichier binaire serafin""",
1301 ang = """gives option for managing the wind:
1302 1: constant in time and space, given by keyword SPEED AND
1304 2: variable in time and (constant in space), given by formated file
1305 3: variable in time and space , given by formated file or by
1306 a binary serafin file""",
1308 # -----------------------------------
1309 b_OPTION_FOR_WINDG = BLOC(condition="OPTION_FOR_WIND == 'constant in time and space'",
1310 # -----------------------------------
1311 # -----------------------------------
1312 SPEED_AND_DIRECTION_OF_WIND = SIMP(statut ='o',
1313 # -----------------------------------
1314 typ = 'R', min= 2, max= 2,
1316 fr = """Donne la vitesse et la direction (en degres de 0 a 360,
1317 0 etant y=0 et x=+inf) du vent lorsqu ils sont consant en temps et
1318 en espace (mot cle OPTION DU VENT = 1)""",
1319 ang = """gives the speed and direction (degre (from 0 to 360),
1320 0 given y=0 anx x=+infinity) when they are constant in time and space
1321 (keyword OPTION FOR WIND = 1)""",
1324 # -----------------------------------
1325 b_OPTION_FOR_WINDH = BLOC(condition="OPTION_FOR_WIND == 'variable in time given by formated file' or OPTION_FOR_WIND == 'variable in time and space given by formated file'",
1326 # -----------------------------------
1327 # -----------------------------------
1328 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
1329 # -----------------------------------
1330 defaut = "Give the formatted file 3"),
1333 # -----------------------------------
1334 AIR_PRESSURE = SIMP(statut ='o',
1335 # -----------------------------------
1338 fr = """Permet de decider si l''on prend ou non en compte l''influence
1339 d''un champ de pression.""",
1340 ang = """Provided to decide whether the influence of
1342 is taken into account or not.""",
1344 # -----------------------------------
1345 b_AIR_PRESSUREG = BLOC(condition="AIR_PRESSURE == True",
1346 # -----------------------------------
1347 # -----------------------------------
1348 VALUE_OF_ATMOSPHERIC_PRESSURE = SIMP(statut ='o',
1349 # -----------------------------------
1352 fr = """donne la valeur de la pression atmospherique lorsquelle est
1353 constante en temps et en espace""",
1354 ang = """gives the value of atmospheric pressure when it is contant
1355 in time and space""",
1358 # -----------------------------------
1359 RAIN_OR_EVAPORATION = SIMP(statut ='o',
1360 # -----------------------------------
1363 fr = """Pour ajouter un apport ou une perte d''eau en surface.
1364 Voir le mot-cle PLUIE OU EVAPORATION EN MM PAR JOUR""",
1365 ang = """to add or remove water at the free surface. See the key-word
1366 RAIN OR EVAPORATION IN MM PER DAY""",
1368 # -----------------------------------
1369 b_RAIN_OR_EVAPORATIONG = BLOC(condition="RAIN_OR_EVAPORATION == True",
1370 # -----------------------------------
1371 # -----------------------------------
1372 RAIN_OR_EVAPORATION_IN_MM_PER_DAY = SIMP(statut ='o',
1373 # -----------------------------------
1376 fr = """Pour ajouter un apport ou une perte d''eau en surface""",
1377 ang = """to add or remove water at the free surface""",
1380 # -----------------------------------
1381 RAINFALL_RUNOFF_MODEL = SIMP(statut ='f',
1382 # -----------------------------------
1384 into = ["No infiltration","CN runoff model"],
1385 defaut = "No infiltration",
1386 fr = """Option pour modele pluie-debit. Les options disponibles sont:
1387 0 : Pas d infiltration (fonction de base)
1388 1 : Modele CN (Curve Number du SCS)""",
1389 ang = """Option for the rainfall-runoff model. Available options are:
1391 1 : CN runoff model (Curve Number method of the SCS)""",
1393 # -----------------------------------
1394 ANTECEDENT_MOISTURE_CONDITIONS = SIMP(statut ='f',
1395 # -----------------------------------
1398 fr = """Donne les conditions d humidite precedant un episode de pluie pour
1399 le modele CN du SCS. Les options disponibles sont:
1400 1 : conditions precedentes seches
1401 2 : conditions precedentes normales
1402 3 : conditions prcedentes mouillees
1403 ce mot cle est uniquement utile pour le modele pluie-debit 1 (CN)""",
1404 ang = """Gives the antecedent moisture conditions before a rainfall
1405 event for the SCS CN runoff model. Available options are:
1406 1 : dry antecedent conditions
1407 2 : normal antecedent conditions
1408 3 : wet antecedent conditions
1409 This keyword is only usefull for runoff model 1 (SCS CN model)""",
1411 # -----------------------------------
1412 DURATION_OF_RAIN_OR_EVAPORATION_IN_HOURS = SIMP(statut ='f',
1413 # -----------------------------------
1416 fr = """Donne la duree de la pluie en heure, par defaut pluie infinie""",
1417 ang = """Gives the duration of the rain in hour,
1418 default value is infinite""",
1420 # -----------------------------------
1421 ASCII_ATMOSPHERIC_DATA_FILE = SIMP(statut ='f',
1422 # -----------------------------------
1423 typ = ('Fichier','All Files (*)'),
1425 fr = """Fichier de donnees en ascii contenant les informations
1426 atmospheriques variables en temps""",
1427 ang = """Ascii data file containing the atmospheric data varying in
1430 # -----------------------------------
1431 BINARY_ATMOSPHERIC_DATA_FILE = SIMP(statut ='f',
1432 # -----------------------------------
1433 typ = ('Fichier','All Files (*)'),
1435 fr = """Fichier de donnees code en binaire contenant les informations
1436 atmospheriques variables en temps et en espace sur le maillage""",
1437 ang = """Binary-coded data file containing the atmospheric data varying in
1438 time and space on the mesh""",
1440 # -----------------------------------
1441 BINARY_ATMOSPHERIC_DATA_FILE_FORMAT = SIMP(statut ='f',
1442 # -----------------------------------
1444 into = ['SERAFIN','SERAFIND','MED'],
1446 fr = """Format du fichier binaire de donn\E9es atmospheriques.
1447 Les valeurs possibles sont :
1448 - SERAFIN : format standard simple precision pour Telemac;
1449 - SERAFIND: format standard double precision pour Telemac;
1450 - MED : format MED base sur HDF5""",
1451 ang = """Binary atmospheric file format.
1452 Possible values are:
1453 - SERAFIN : classical single precision format in Telemac;
1454 - SERAFIND: classical double precision format in Telemac;
1455 - MED : MED format based on HDF5""",
1457 # -----------------------------------
1458 OPTION_FOR_INITIAL_ABSTRACTION_RATIO = SIMP(statut ='f',
1459 # -----------------------------------
1462 fr = """Donne le ratio entre pertes initiales IA et la retention potenti
1463 maximale S pour le modele pluie-debit SCS CN. Les options disponibles so
1464 1 : IA/S = 0.2 (methode standard)
1465 2 : IA/S = 0.05 (methode revisee, cf. Woodward, Hawkins et al. 2003. A
1466 cette option les coefficients CN fournis en entree sont alors
1467 automatiquement corriges, cf. manuel utilisateur).
1468 Ce mot cle est uniquement utile pour le modele pluie-d�bit 1 (CN)""",
1469 ang = """Gives the ratio for Initial Abstraction to Maximal Potential
1470 Retention S for the SCS CN runoff model. Available options are:
1471 1 : IA/S = 0.2 (standard method)
1472 2 : IA/S = 0.05 (revised method, see Woodward, Hawkins et al. 2003. Wi
1473 this option the CN values given in input are automatically convers
1475 This keyword is only useful for runoff model 1 (SCS CN model)""",
1478 # -----------------------------------
1479 WAVE = FACT(statut='f',
1480 # -----------------------------------
1481 # -----------------------------------
1482 WAVE_DRIVEN_CURRENTS = SIMP(statut ='o',
1483 # -----------------------------------
1486 fr = """Active la prise en compte des courants de houle""",
1487 ang = """Wave driven currents are taken into account.""",
1489 # -----------------------------------
1490 b_WAVE_DRIVEN_CURRENTSG = BLOC(condition="WAVE_DRIVEN_CURRENTS == True",
1491 # -----------------------------------
1492 # -----------------------------------
1493 RECORD_NUMBER_IN_WAVE_FILE = SIMP(statut ='o',
1494 # -----------------------------------
1497 fr = """Numero d enregistrement dans le fichier des courants de houle""",
1498 ang = """Record number to read in the wave driven currents file""",
1501 # -----------------------------------
1502 WAVE_ENHANCED_FRICTION_FACTOR = SIMP(statut ='f',
1503 # -----------------------------------
1506 fr = """Active la prise en compte des interactions non-lineaires entre la
1507 houle et les courant pour le calcul du courant de houle (cf OConnor and
1508 Yoo, 1988, Coast Eng.12.)""",
1509 ang = """Wave friction enhancement for the calculation of the wave generated
1510 longshore current (cf OConnor and Yoo, 1988, Coast Eng.12.)""",
1513 # -----------------------------------
1514 ESTIMATION = FACT(statut='f',
1515 # -----------------------------------
1516 # -----------------------------------
1517 PARAMETER_ESTIMATION = SIMP(statut ='o',
1518 # -----------------------------------
1520 into = ['','FRICTION','FRICTION, STEADY'],
1522 fr = """Liste des parametres a estimer, choix : FROTTEMENT
1523 ou FROTTEMENT, PERMANENT""",
1524 ang = """List of parameter to be estimated, choice : FRICTION
1525 or FRICTION, STEADY""",
1527 # -----------------------------------
1528 COST_FUNCTION = SIMP(statut ='f',
1529 # -----------------------------------
1531 into = ["Computed with h,u,v","Computed with c,u,v"],
1532 defaut = "Computed with h,u,v",
1533 fr = """1 : calculee sur h, u , v 2 : calculee avec c, u , v""",
1534 ang = """1: computed with h, u , v 2: computed with c, u , v""",
1536 # -----------------------------------
1537 IDENTIFICATION_METHOD = SIMP(statut ='o',
1538 # -----------------------------------
1540 into = ["list of tests","gradient simple","conj gradient","Lagrange interp."],
1541 defaut = "gradient simple",
1542 fr = """0 : plan d''experience
1545 3 : interp. de Lagrange""",
1546 ang = """0 : list of tests
1549 3 : lagrange interp.""",
1551 # -----------------------------------
1552 TOLERANCES_FOR_IDENTIFICATION = SIMP(statut ='o',
1553 # -----------------------------------
1554 typ = 'R', min= 4, max= 4,
1555 defaut = [1.E-3,1.E-3,1.E-3,1.E-4],
1556 fr = """4 nombres : precision absolue sur H, U, V,
1557 et precision relative sur la fonction cout""",
1558 ang = """4 numbers: absolute precision on H, U V,
1559 and relative precision on the cost function""",
1561 # -----------------------------------
1562 MAXIMUM_NUMBER_OF_ITERATIONS_FOR_IDENTIFICATION = SIMP(statut ='o',
1563 # -----------------------------------
1566 fr = """chaque iteration comprend au moins un
1567 calcul direct et un calcul adjoint""",
1568 ang = """every iteration implies at least a direct and
1569 an adjoint computation""",
1572 # -----------------------------------
1573 SOURCES = FACT(statut='f',
1574 # -----------------------------------
1575 # -----------------------------------
1576 ABSCISSAE_OF_SOURCES = SIMP(statut ='f',
1577 # -----------------------------------
1578 typ = 'R', min=0, max='**',
1579 fr = """Valeurs des abscisses des sources de debit et de traceur.""",
1580 ang = """abscissae of sources of flowrate and/or tracer""",
1582 # -----------------------------------
1583 ORDINATES_OF_SOURCES = SIMP(statut ='f',
1584 # -----------------------------------
1585 typ = 'R', min=0, max='**',
1586 fr = """Valeurs des ordonnees des sources de debit et de traceur.""",
1587 ang = """ordinates of sources of flowrate and/or tracer""",
1589 # -----------------------------------
1590 WATER_DISCHARGE_OF_SOURCES = SIMP(statut ='f',
1591 # -----------------------------------
1592 typ = 'R', min=0, max='**',
1593 fr = """Valeurs des debits des sources.""",
1594 ang = """values of water discharge of sources""",
1596 # -----------------------------------
1597 VELOCITIES_OF_THE_SOURCES_ALONG_X = SIMP(statut ='f',
1598 # -----------------------------------
1599 typ = 'R', min=0, max='**',
1600 fr = """Vitesses du courant a chacune des sources. Si elles ne sont pas
1601 donnees, on considere que la vitesse est celle du courant""",
1602 ang = """Velocities at the sources. If they are not given, the velocity
1603 of the flow at this location is taken""",
1605 # -----------------------------------
1606 VELOCITIES_OF_THE_SOURCES_ALONG_Y = SIMP(statut ='f',
1607 # -----------------------------------
1608 typ = 'R', min=0, max='**',
1609 fr = """Vitesses du courant a chacune des sources""",
1610 ang = """Velocities at the sources""",
1612 # -----------------------------------
1613 TYPE_OF_SOURCES = SIMP(statut ='o',
1614 # -----------------------------------
1616 into = ["Normal","Dirac"],
1618 fr = """1: Source portee par une base elements finis
1619 2: Source portee par une fonction de Dirac""",
1620 ang = """1: Source term multiplied by a finite element basis
1621 2: Source term multiplied by a Dirac function""",
1623 # -----------------------------------
1624 SOURCES_FILE = SIMP(statut ='f',
1625 # -----------------------------------
1626 typ = ('Fichier','All Files (*)'),
1628 fr = """Nom du fichier contenant les informations variables
1629 en temps des sources""",
1630 ang = """Name of the file containing time-dependent
1631 information on sources""",
1633 # -----------------------------------
1634 BLOBAL_NUMBERS_OF_SOURCE_NODES = SIMP(statut ='f',
1635 # -----------------------------------
1636 typ = 'I', min=0, max='**',
1637 fr = """ Numeros globaux des noeuds du maillage sur lequels sont affectes des
1639 ang = """ Global numbers of nodes in the mesh that correspond to source point
1643 # -----------------------------------
1644 WATER_QUALITY_INFO = FACT(statut='f',
1645 # -----------------------------------
1646 # -----------------------------------
1647 WATER_QUALITY_PROCESS = SIMP(statut ='f',
1648 # -----------------------------------
1651 fr = """donne le numero du processus waq (1 ou 2 ou 3
1653 0- RIEN, 1-O2, 2-BIOMASS, 3-EUTRO 4-MICROPOL 5-THERMIC)""",
1654 ang = """gives the waq process number (from 1 to 5)
1655 0-NOTHING, 1-O2, 2-BIOMASS, 3-EUTRO 4-MICROPOL 5-THERMIC)""",
1658 # -----------------------------------
1659 ADVANCED_PHY = FACT(statut='f',
1660 # -----------------------------------
1661 # -----------------------------------
1662 WATER_DENSITY = SIMP(statut ='o',
1663 # -----------------------------------
1666 fr = """Fixe la valeur de la masse volumique de l''eau.""",
1667 ang = """set the value of water density""",
1669 # -----------------------------------
1670 GRAVITY_ACCELERATION = SIMP(statut ='o',
1671 # -----------------------------------
1674 fr = """Fixe la valeur de l''acceleration de la pesanteur.""",
1675 ang = """Set the value of the acceleration due to gravity.""",
1677 # -----------------------------------
1678 VERTICAL_STRUCTURES = SIMP(statut ='o',
1679 # -----------------------------------
1682 fr = """Prise en compte de la force de trainee de structures verticales
1683 (il faut alors remplir la subroutine DRAGFO)""",
1684 ang = """drag forces from vertical structures are taken into account.
1685 (subroutine DRAGFO must then be implemented)""",
1687 # -----------------------------------
1688 b_VERTICAL_STRUCTURESG = BLOC(condition="VERTICAL_STRUCTURES == True",
1689 # -----------------------------------
1690 # -----------------------------------
1691 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
1692 # -----------------------------------
1693 defaut = "Fill the subroutine DRAGFO"),
1697 # -----------------------------------
1698 NUMERICAL_PARAMETERS_HYDRO = FACT(statut='o',
1699 # -----------------------------------
1700 # -----------------------------------
1701 EQUATIONS = SIMP(statut ='o',
1702 # -----------------------------------
1704 into = ['SAINT-VENANT FE','SAINT-VENANT FV','BOUSSINESQ'],
1705 defaut = 'SAINT-VENANT FE',
1706 fr = """CHOIX DES EQUATIONS A RESOUDRE : SAINT-VENANT ELEMENTS FINIS,
1707 SAINT-VENANT VOLUMES FINIS OU BOUSSINESQ 20 CARACTERES""",
1708 ang = """CHOICE OF EQUATIONS TO SOLVE : SAINT-VENANT FINITE ELEMENTS,
1709 SAINT-VENANT FINITE VOLUMES OR BOUSSINESQ 20 CHARACTERS""",
1711 # -----------------------------------
1712 b_EQUATIONSG = BLOC(condition="EQUATIONS == 'SAINT-VENANT FV'",
1713 # -----------------------------------
1714 # -----------------------------------
1715 FINITE_VOLUME_SCHEME = SIMP(statut ='o',
1716 # -----------------------------------
1718 into = ["Roe scheme","kinetic order 1","kinetic order 2","Zokagoa scheme order 1","Tchamen scheme order 1","HLLC scheme order 1","WAF scheme order 2"],
1719 defaut = "kinetic order 1",
1720 fr = """0 : schema de Roe 1 : cinetique ordre 1 2 : cinetique ordre 2
1721 3 : schema de Zokagoa 4 : schema de Tchamen 5 : HLLC ordre 1
1723 ang = """0: Roe scheme 1: kinetic order 1 2: kinetic order 2
1724 3 : Zokagoa scheme 4 : Tchamen scheme 5 : HLLC order 1
1728 # -----------------------------------
1729 TREATMENT_OF_THE_LINEAR_SYSTEM = SIMP(statut ='o',
1730 # -----------------------------------
1732 into = ["coupled","Wave equation"],
1734 fr = """1 : Traitement couple 2 : equation d onde""",
1735 ang = """1 : Coupled 2 : wave equation""",
1738 # -----------------------------------
1739 FLUID = FACT(statut='f',
1740 # -----------------------------------
1741 # -----------------------------------
1742 CORIOLIS_EFFECT = FACT(statut='f',
1743 # -----------------------------------
1744 # -----------------------------------
1745 CORIOLIS = SIMP(statut ='o',
1746 # -----------------------------------
1749 fr = """Prise en compte ou non de la force de Coriolis.""",
1750 ang = """The Coriolis force is taken into account or ignored.""",
1752 # -----------------------------------
1753 CORIOLIS_COEFFICIENT = SIMP(statut ='o',
1754 # -----------------------------------
1757 fr = """Fixe la valeur du coefficient de la force de Coriolis.
1758 Celui-ci doit etre calcule en fonction de la latitude l par la formule
1759 FCOR = 2w sin(l) , w etant la vitesse de rotation de la terre.
1760 w = 7.2921 10-5 rad/s
1761 Les composantes de la force de Coriolis sont alors :
1764 ang = """Sets the value of the Coriolis force coefficient, in cartesian
1766 This coefficient, denoted FCOR in the code, should be equal to
1767 2 w sin(l)d where w denotes the earth angular speed of rotation
1768 and l the latitude. w = 7.27 10-5 rad/sec
1769 The Coriolis force components are then:
1772 In spherical coordinates, the latitudes are known""",
1775 # -----------------------------------
1776 TSUNAMI = FACT(statut='f',
1777 # -----------------------------------
1778 # -----------------------------------
1779 OPTION_FOR_TSUNAMI_GENERATION = SIMP(statut ='o',
1780 # -----------------------------------
1782 into = ["No Tsunami","Tsunami generated on the basis of the Okada model 1992"],
1783 defaut = "No Tsunami",
1787 # -----------------------------------
1788 PHYSICAL_CHARACTERISTICS_OF_THE_TSUNAMI = SIMP(statut ='o',
1789 # -----------------------------------
1790 typ = 'R', min=10, max=10,
1791 defaut = [100.,210000.,75000.,13.6,81.,41.,110.,0.,0.,3.],
1796 # -----------------------------------
1797 SECONDARY_CURRENTS_INFO = FACT(statut='f',
1798 # -----------------------------------
1799 # -----------------------------------
1800 SECONDARY_CURRENTS = SIMP(statut ='o',
1801 # -----------------------------------
1804 fr = """Pour prendre en compte les courants secondaires""",
1805 ang = """Using the parametrisation for secondary currents""",
1807 # -----------------------------------
1808 b_SECONDARY_CURRENTSG = BLOC(condition="SECONDARY_CURRENTS == True",
1809 # -----------------------------------
1810 # -----------------------------------
1811 PRODUCTION_COEFFICIENT_FOR_SECONDARY_CURRENTS = SIMP(statut ='o',
1812 # -----------------------------------
1815 fr = """Une constante dans les termes de creation de Omega""",
1816 ang = """A constant in the production terms of Omega""",
1818 # -----------------------------------
1819 DISSIPATION_COEFFICIENT_FOR_SECONDARY_CURRENTS = SIMP(statut ='o',
1820 # -----------------------------------
1823 fr = """Coefficient de dissipation de Omega""",
1824 ang = """Coefficient of dissipation term of Omega""",
1830 # -----------------------------------------------------------------------
1831 GENERAL_PARAMETERS = PROC(nom= "GENERAL_PARAMETERS",op = None,
1832 # -----------------------------------------------------------------------
1833 UIinfo = {"groupes": ("CACHE")},
1834 # -----------------------------------
1835 DEBUGGER = SIMP(statut ='o',
1836 # -----------------------------------
1839 fr = """Pour imprimer la sequence des appels, mettre 1""",
1840 ang = """If 1, calls of subroutines will be printed in the listing""",
1842 # -----------------------------------
1843 TIME = FACT(statut='o',
1844 # -----------------------------------
1845 # -----------------------------------
1846 TIME_STEP = SIMP(statut ='o',
1847 # -----------------------------------
1850 fr = """Definit le pas de temps en secondes. Remarque : Pour une bonne
1851 precision; il est souhaitable de choisir le pas de temps de telle sorte
1852 que le nombre de Courant de propagation soit inferieur a 2 ; voir 3.
1853 Ceci peut etre realisable en hydraulique fluviale ; mais ne l''est
1854 pratiquement jamais en hydraulique maritime ou l''on peut atteindre des
1856 ang = """Specifies the time step in seconds.""",
1858 # -----------------------------------
1859 NUMBER_OF_TIME_STEPS = SIMP(statut ='f',
1860 # -----------------------------------
1863 fr = """ Definit le nombre de pas de temps effectues lors de l''execution du
1865 ang = """ Specifies the number of time steps performed when running the code.""",
1867 # -----------------------------------
1868 DURATION = SIMP(statut ='f',
1869 # -----------------------------------
1872 fr = """Duree de la simulation. alternative au parametre nombre de pas
1873 de temps. On en deduit le nombre de pas de temps en prenant l''entier le
1874 plus proche de (duree du calcul/pas de temps). Si le nombre de pas de
1875 temps est aussi donne, on prend la plus grande valeur""",
1876 ang = """Duration of simulation. May be used instead of the parameter
1877 NUMBER OF TIME STEPS. The nearest integer to (duration/time step) is
1879 If NUMBER OF TIME STEPS is also given, the greater value is taken""",
1881 # -----------------------------------
1882 ORIGINAL_DATE_OF_TIME = SIMP(statut ='o',
1883 # -----------------------------------
1884 typ = 'I', min= 3, max= 3,
1885 defaut = [1900,1,1],
1886 fr = """Permet de fixer la date d''origine des temps du modele lors
1887 de la prise en compte de la force generatrice de la maree.""",
1888 ang = """Give the date of the time origin of the model when taking into
1889 account the tide generating force.""",
1891 # -----------------------------------
1892 ORIGINAL_HOUR_OF_TIME = SIMP(statut ='o',
1893 # -----------------------------------
1894 typ = 'I', min= 3, max= 3,
1896 fr = """ Permet de fixer l''heure d''origine des temps du modele lors de la
1897 prise en compte de la force generatrice de la maree.""",
1898 ang = """ Give the time of the time origin of the model when taking into account
1899 of the tide generator force.""",
1901 # -----------------------------------
1902 STOP_IF_A_STEADY_STATE_IS_REACHED = SIMP(statut ='o',
1903 # -----------------------------------
1906 fr = """A UTILISER AVEC LE MOT-CLE : CRITERES D''ARRET""",
1907 ang = """TO BE USED WITH THE KEY-WORD: STOP CRITERIA""",
1909 # -----------------------------------
1910 b_STOP_IF_A_STEADY_STATE_IS_REACHEDG = BLOC(condition="STOP_IF_A_STEADY_STATE_IS_REACHED == True",
1911 # -----------------------------------
1912 # -----------------------------------
1913 STOP_CRITERIA = SIMP(statut ='o',
1914 # -----------------------------------
1915 typ = 'R', min= 3, max= 3,
1916 defaut = [1.E-4,1.E-4,1.E-4],
1917 fr = """Criteres d''arret pour un ecoulement permanent
1918 ces coefficients sont respectivement appliques a
1922 A utiliser avec le mot-cle : ARRET SI UN ETAT PERMANENT EST ATTEINT""",
1923 ang = """Stop criteria for a steady state
1924 These coefficients are applied respectively to
1928 To be used with the key-word: STOP IF A STEADY STATE IS REACHED""",
1931 # -----------------------------------
1932 CONTROL_OF_LIMITS = SIMP(statut ='o',
1933 # -----------------------------------
1936 fr = """Utiliser avec le mot-cle : valeurs limites, le programme
1937 s''arrete si les limites sur u,v,h ou t sont depassees""",
1938 ang = """Use with the key-word : limit values,
1939 the program is stopped if
1940 the limits on u,v,h, or t are trespassed""",
1942 # -----------------------------------
1943 b_CONTROL_OF_LIMITSG = BLOC(condition="CONTROL_OF_LIMITS == True",
1944 # -----------------------------------
1945 # -----------------------------------
1946 LIMIT_VALUES = SIMP(statut ='o',
1947 # -----------------------------------
1948 typ = 'R', min= 8, max= 8,
1949 defaut = [-1000.,9000.,-1000.,1000.,-1000.,1000.,-1000.,1000.],
1950 fr = """Utilise avec le mot-cle CONTROLE DES LIMITES
1951 valeurs mini et maxi acceptables pour H,U,V et T dans l''ordre
1952 suivant : min(H) max(H) min(U) max(U)
1953 min(V) max(V) min(T) max(T)""",
1954 ang = """To be used with the key-word CONTROL OF LIMITS
1955 min and max acceptable values for H,U,V et T in the following
1956 order : min(H) max(H) min(U) max(U)
1957 min(V) max(V) min(T) max(T)""",
1960 # -----------------------------------
1961 VARIABLE_TIME_STEP = SIMP(statut ='o',
1962 # -----------------------------------
1965 fr = """ Pas de temps variable pour avoir un nombre de courant souhaite""",
1966 ang = """ Variable time-step to get a given Courant number""",
1968 # -----------------------------------
1969 b_VARIABLE_TIME_STEPG = BLOC(condition="VARIABLE_TIME_STEP == True",
1970 # -----------------------------------
1971 # -----------------------------------
1972 DESIRED_COURANT_NUMBER = SIMP(statut ='o',
1973 # -----------------------------------
1976 fr = """Nombre de Courant souhaite en cas de pas de temps variable""",
1977 ang = """Desired Courant number when VARIABLE TIME-STEP is set to YES""",
1981 # -----------------------------------
1982 LOCATION = FACT(statut='o',
1983 # -----------------------------------
1984 # -----------------------------------
1985 ORIGIN_COORDINATES = SIMP(statut ='o',
1986 # -----------------------------------
1987 typ = 'I', min= 2, max= 2,
1989 fr = """Valeur en metres, utilise
1990 pour eviter les trops grands nombres, transmis
1991 dans le format Selafin mais pas d''autre traitement pour l''instant""",
1992 ang = """Value in metres, used to avoid large real numbers,
1993 added in Selafin format, but so far no other treatment""",
1995 # -----------------------------------
1996 SPHERICAL_COORDINATES = SIMP(statut ='o',
1997 # -----------------------------------
2000 fr = """Choix des coordonnees spheriques pour la realisation du calcul
2001 ( pour les grands domaines de calcul).
2002 Attention : cette option est etroitement liee au
2003 maillage qui doit avoir
2004 ete saisi sur une carte marine en projection de Mercator.
2005 Il faut de plus relever sur la carte la LATITUDE DU POINT ORIGINE
2006 (autre mot-cle) qui correspond dans le maillage a l''ordonnee y = 0.""",
2007 ang = """Selection of spherical coordinates to perform the computation
2008 (for large computation domains).
2009 Warning: this option is closely related to the mesh that should have
2010 been entered onto a nautical chart drawn as per Mercator projection
2011 The LATITUDE OF ORIGIN POINT (another keyword), which corresponds to
2012 ordinate y=0 in the mesh, must moreover be given.""",
2014 # -----------------------------------
2015 b_SPHERICAL_COORDINATESG = BLOC(condition="SPHERICAL_COORDINATES == True",
2016 # -----------------------------------
2017 # -----------------------------------
2018 LATITUDE_OF_ORIGIN_POINT = SIMP(statut ='o',
2019 # -----------------------------------
2022 fr = """Determine l''origine utilisee pour le calcul de latitudes
2023 lorsque l''on effectue un calcul en coordonnees spheriques.""",
2024 ang = """Determines the origin used for computing latitudes when
2025 a computation is made in spherical coordinates.
2026 this latitude is in particular used to compute the Coriolis force.
2027 In cartesian coordinates, Coriolis coefficient is considered constant.""",
2030 # -----------------------------------
2031 LONGITUDE_OF_ORIGIN_POINT = SIMP(statut ='o',
2032 # -----------------------------------
2035 fr = """Fixe la valeur de la longitude du point origine du modele,
2036 lors de l''utilisation de la force generatrice de la maree.""",
2037 ang = """Give the value of the longitude of the origin point
2038 of the model, when taking into account of the tide generator force.""",
2040 # -----------------------------------
2041 NORTH = SIMP(statut ='f',
2042 # -----------------------------------
2045 fr = """Direction du nord en degres, par rapport a l''axe des y
2046 dans le sens trigonometrique. Notation decimale 10.5 signifie 10 degres
2047 et trente minutes.""",
2048 ang = """Angle of the North with the y axis, in degrees. 10.5 means
2049 10 degrees and 30 minutes.""",
2051 # -----------------------------------
2052 SPATIAL_PROJECTION_TYPE = SIMP(statut ='o',
2053 # -----------------------------------
2055 into = ["CARTESIAN, NOT GEOREFERENCED","MERCATOR","LATITUDE LONGITUDE"],
2056 defaut = "CARTESIAN, NOT GEOREFERENCED",
2057 fr = """Option 2 ou 3 obligatoire pour les coordonnees spheriques
2058 Option 3 : latitude et longitude en degres !""",
2059 ang = """Option 2 or 3 mandatory for spherical coordinates
2060 Option 3: latitude and longitude in degrees!""",
2064 # -----------------------------------------------------------------------
2065 NUMERICAL_PARAMETERS = PROC(nom= "NUMERICAL_PARAMETERS",op = None,
2066 # -----------------------------------------------------------------------
2067 UIinfo = {"groupes": ("CACHE")},
2068 # -----------------------------------
2069 SOLVER_INFO = FACT(statut='o',
2070 # -----------------------------------
2071 # -----------------------------------
2072 SOLVER = SIMP(statut ='o',
2073 # -----------------------------------
2075 into = ["conjugate gradient on a normal equation","conjugate gradient","conjugate residual","minimum error","cgstab","gmres","direct"],
2076 defaut = "conjugate gradient on a normal equation",
2077 fr = """Permet de choisir le solveur utilise pour la resolution de
2078 l''etape de propagation. Toutes les methodes proposees actuellement
2079 s''apparentent au Gradient Conjugue. Ce sont :
2080 1 : gradient conjugue
2082 3 : gradient conjugue sur equation normale
2084 5 : gradient conjugue carre (non programme)
2085 6 : gradient conjugue carre stabilise (cgstab)
2086 7 : gmres (voir aussi option du solveur)
2088 ang = """Makes it possible to select the solver used for solving the
2089 propagation step. All the currently available methods are variations
2090 of the Conjugate Gradient method. They are as follows:
2091 1: conjugate gradient
2092 2: conjugate residual
2093 3: conjugate gradient on a normal equation
2095 5: conjugate gradient squared (not implemented)
2096 6: conjugate gradient squared stabilised (cgstab)
2097 7: gmres (see option for solver)
2100 # -----------------------------------
2101 b_SOLVERG = BLOC(condition="SOLVER == 'gmres'",
2102 # -----------------------------------
2103 # -----------------------------------
2104 SOLVER_OPTION = SIMP(statut ='o',
2105 # -----------------------------------
2108 fr = """si le solveur est GMRES (7) le mot cle est la dimension de
2109 l''espace de KRYLOV (valeurs conseillees entre 2 et 15)""",
2110 ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
2111 TRY VALUES BETWEEN 2 AND 15""",
2114 # -----------------------------------
2115 SOLVER_ACCURACY = SIMP(statut ='o',
2116 # -----------------------------------
2119 fr = """Precision demandee pour la resolution de l''etape de propagation
2120 (cf. Note de principe).""",
2121 ang = """Required accuracy for solving the propagation step
2122 (refer to Principle note).""",
2124 # -----------------------------------
2125 MAXIMUM_NUMBER_OF_ITERATIONS_FOR_SOLVER = SIMP(statut ='o',
2126 # -----------------------------------
2129 fr = """Les algorithmes utilises pour la resolution de l''etape de
2130 propagation etant iteratifs; il est necessaire de limiter le nombre
2131 d''iterations autorisees.
2132 Remarque : un maximum de 40 iterations par pas de temps semble
2134 ang = """Since the algorithms used for solving the propagation step are
2135 iterative, the allowed number of iterations should be limited.
2136 NOTE: a maximum number of 40 iterations per time step seems to be
2139 # -----------------------------------
2140 CONTINUITY_CORRECTION = SIMP(statut ='o',
2141 # -----------------------------------
2144 fr = """Corrige les vitesses sur les points avec hauteur imposee ou
2145 l''equation de continuite n''a pas ete resolue""",
2146 ang = """Correction of the velocities on points with a prescribed
2147 elevation, where the continuity equation has not been solved""",
2149 # -----------------------------------
2150 PRECONDITIONING = SIMP(statut ='o',
2151 # -----------------------------------
2153 into = ["diagonal","no preconditioning","block-diagonal (4-9 matrices)","absolute value of diagonal","crout","gauss-seidel","diagonal and crout"],
2154 defaut = "diagonal",
2155 fr = """Permet de preconditionner le systeme de l''etape de propagation
2156 afin d''accelerer la convergence lors de sa resolution.
2157 - 0 : pas de preconditionnement;
2158 - 2 : preconditionnement diagonal.
2159 - 3 : preconditionnement diagonal-bloc
2160 - 7 : preconditionnement de Crout par element ou segment
2161 -11 : preconditionnement de Gauss-Seidel par element ou segment
2162 Certains preconditionnements sont cumulables
2163 (les diagonaux 2 ou 3 avec les autres)
2164 Pour cette raison on ne retient que les nombres premiers pour
2165 designer les preconditionnements. Si l''on souhaite en cumuler
2166 plusieurs on formera le produit des options correspondantes.""",
2167 ang = """Choice of the preconditioning in the propagation step linear
2168 system that the convergence is speeded up when it is being solved.
2169 0: no preconditioning
2170 2: diagonal preconditioning
2171 3: block-diagonal preconditioning (systemes a 4 ou 9 matrices)
2172 7: Crout''s preconditioning per element or segment
2173 11: Gauss-Seidel''s preconditioning per element or segment
2174 Some operations (either 2 or 3 diagonal preconditioning) can be
2175 performed concurrently with the others.
2176 Only prime numbers are therefore kept to denote the preconditioning
2177 operations. When several of them are to be performed concurrently,
2178 the product of relevant options shall be made.""",
2180 # -----------------------------------
2181 C_U_PRECONDITIONING = SIMP(statut ='o',
2182 # -----------------------------------
2185 fr = """Changement de variable de H en C dans le systeme lineaire final""",
2186 ang = """Change of variable from H to C in the final linear system""",
2189 # -----------------------------------
2190 DISCRETISATIONS_IMPLICITATION = FACT(statut='o',
2191 # -----------------------------------
2192 # -----------------------------------
2193 IMPLICITATION_FOR_DEPTH = SIMP(statut ='o',
2194 # -----------------------------------
2197 fr = """Fixe la valeur du coefficient d''implicitation sur C dans l''etape de
2198 propagation (cf. Note de principe). Les valeurs inferieures a 0.5
2199 donnent un schema instable.""",
2200 ang = """Sets the value of the implicitation coefficient for C (the celerity of
2201 waves) in the propagation step (refer to principle note). Values below
2202 0.5 result in an unstable scheme.""",
2204 # -----------------------------------
2205 IMPLICITATION_FOR_VELOCITY = SIMP(statut ='o',
2206 # -----------------------------------
2209 fr = """Fixe la valeur du coefficient d''implicitation sur la vitesse dans
2210 l''etape de propagation (cf. Note de principe). Les valeurs inferieures
2211 a 0.5 donnent un schema instable.""",
2212 ang = """Sets the value of the implicitation coefficient for velocity in the
2213 propagation step (refer to principle note). Values below 0.5 result in
2214 an unstable condition.""",
2216 # -----------------------------------
2217 DISCRETIZATIONS_IN_SPACE = SIMP(statut ='f',
2218 # -----------------------------------
2219 typ = 'TXM', max='**',
2220 into = ["linear","quasi-bubble","quadratic"],
2221 defaut = ["linear","linear","linear","linear"],
2222 fr = """ Choix de la discretisation pour chaque variable ces coefficients sont
2223 respectivement appliques a 1) U et V 2) H 3) T 4) K ET EPSILON (NON
2224 PROGRAMME) 11 : lineaire 12 : quasi-bulle 13 : quadratique""",
2225 ang = """ Choice of space discretisation for every variable These coefficients
2226 are applied respectively to 1) U and V 2) H 3) T 4) K and EPSILON (NOT
2227 IMPLEMENTED) 11: linear 12: quasi-bubble 13: quadratic""",
2229 # -----------------------------------
2230 b_DISCRETIZATIONS_IN_SPACEG = BLOC(condition="DISCRETIZATIONS_IN_SPACE != None",
2231 # -----------------------------------
2232 # -----------------------------------
2233 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
2234 # -----------------------------------
2235 defaut = "Choice of space discretisation for every variable. These coefficients are applied respectively to 1) U and V 2) H 3) T 4) K and EPSILON"),
2238 # -----------------------------------
2239 PROPAGATION_INFO = FACT(statut='o',
2240 # -----------------------------------
2241 # -----------------------------------
2242 PROPAGATION = SIMP(statut ='o',
2243 # -----------------------------------
2246 fr = """Prise en compte ou non de la propagation de la vitesse et de la
2248 La diffusion etant contenue dans cette etape sera supprimee aussi.""",
2249 ang = """Determines whether the propagation step is taken into account
2251 The diffusion being included in that step will be deleted as well.""",
2253 # -----------------------------------
2254 b_PROPAGATIONG = BLOC(condition="PROPAGATION == True",
2255 # -----------------------------------
2256 # -----------------------------------
2257 MEAN_DEPTH_FOR_LINEARIZATION = SIMP(statut ='o',
2258 # -----------------------------------
2261 fr = """Fixe la hauteur d''eau autour de laquelle s''effectue la
2262 linearisation lorsque l''option PROPAGATION LINEARISEE est choisie.""",
2263 ang = """Sets the water depth about which the linearization is made
2264 when the LINEARIZED PROPAGATION OPTION is selected.""",
2266 # -----------------------------------
2267 INITIAL_GUESS_FOR_U = SIMP(statut ='o',
2268 # -----------------------------------
2270 into = ["zero","previous","extrapolation"],
2271 defaut = "previous",
2272 fr = """Tir initial du solveur de l''etape de propagation.
2273 Offre la possibilite de modifier la valeur initiale de U, a chaque
2274 iteration, dans l''etape de propagation en utilisant les valeurs
2275 finales de cette variable aux pas de temps precedents. Ceci peut
2276 permettre d''accelerer la vitesse de convergence lors de la resolution
2277 du systeme. Trois possibilites sont offertes :
2280 2 : U = 2 U(n)- U(n-1) (extrapolation)""",
2281 ang = """Initial guess for the solver in the propagation step.
2282 Makes it possible to modify the initial value of U, upon each
2283 iteration in the propagation step, by using the ultimate values this
2284 variable had in the earlier time steps. Thus, the convergence can be
2285 speeded up when the system is being solved. 3 options are available:
2288 2 : U = 2 U(n)- U(n-1) (extrapolation)""",
2291 # -----------------------------------
2292 INITIAL_GUESS_FOR_H = SIMP(statut ='o',
2293 # -----------------------------------
2295 into = ["previous","zero","extrapolation"],
2296 defaut = "previous",
2297 fr = """ Tir initial du solveur de l''etape de propagation. Offre la
2298 possibilite de modifier la valeur initiale de DH, accroissement de H, a
2299 chaque iteration, dans l''etape de propagation en utilisant les valeurs
2300 finales de cette variable aux pas de temps precedents. Ceci peut
2301 permettre d''accelerer la vitesse de convergence lors de la resolution
2302 du systeme. Trois possibilites sont offertes :
2304 1 : DH = DHn (valeur finale de DH au pas de temps precedent),
2305 2 : DH = 2DHn - DHn-1 (extrapolation).""",
2306 ang = """Initial guess for the solver in the propagation step.
2307 Makes it possible to modify the initial value of C, upon each
2308 iteration in the propagation step, by using the ultimate values this
2309 variable had in the earlier time steps. Thus, the convergence can be
2310 speeded up when the system is being solved. 3 options are available:
2312 1: DH = DHn (ultimate DH value in the next previous time step)
2313 2: DH = 2DHn - DHn-1 (extrapolation)""",
2315 # -----------------------------------
2316 LINEARIZED_PROPAGATION = SIMP(statut ='o',
2317 # -----------------------------------
2320 fr = """Permet de lineariser l''etape de propagation;
2321 par exemple lors de la realisation de cas tests
2322 pour lesquels on dispose
2323 d''une solution analytique dans le cas linearise.""",
2324 ang = """Provided for linearizing the propagation step, e.g. when
2325 performing test-cases for which an analytical
2326 solution in the linearized
2327 case is available.""",
2330 # -----------------------------------
2331 ADVECTION_INFO = FACT(statut='o',
2332 # -----------------------------------
2333 # -----------------------------------
2334 ADVECTION = SIMP(statut ='o',
2335 # -----------------------------------
2338 fr = """Prise en compte ou non des termes de convection.
2339 En cas de reponse positive;
2340 on peut encore supprimer certains termes de convection avec
2341 les mots-cles CONVECTION DE ...""",
2342 ang = """Are the advection terms taken into account or not?
2343 If YES, some advection terms can still be deleted using the keywords
2344 -ADVECTION OF ..-""",
2346 # -----------------------------------
2347 ADVECTION_OF_H = SIMP(statut ='o',
2348 # -----------------------------------
2351 fr = """Prise en compte ou non de la convection de H.
2352 Il s''agit en fait dans la version 2.0 de la convection de C""",
2353 ang = """The advection of H is taken into account or ignored.
2354 Actually, in version 2.0, the matter is about C advection.""",
2356 # -----------------------------------
2357 ADVECTION_OF_U_AND_V = SIMP(statut ='f',
2358 # -----------------------------------
2361 fr = """Prise en compte ou non de la convection de U et V.""",
2362 ang = """The advection of U and V is taken into account or ignored.""",
2364 # -----------------------------------
2365 b_ADVECTION_OF_U_AND_VG = BLOC(condition="ADVECTION_OF_U_AND_V == True",
2366 # -----------------------------------
2367 # -----------------------------------
2368 SCHEME_FOR_ADVECTION_OF_VELOCITIES = SIMP(statut ='o',
2369 # -----------------------------------
2371 into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","N-SCHEME FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME"],
2372 defaut = "CHARACTERISTICS",
2373 fr = """Choix du schema de convection pour les vitesses,
2374 remplace FORME DE LA CONVECTION""",
2375 ang = """Choice of the advection scheme for the velocities,
2376 replaces TYPE OF ADVECTION""",
2379 # -----------------------------------
2380 TYPE_OF_ADVECTION = SIMP(statut ='f',
2381 # -----------------------------------
2382 typ = 'TXM', max='**',
2383 into = ["CHARACTERISTICS","SUPG","CONSERVATIVE N-SCHEME LP","CONSERVATIVE N-SCHEME","CONSERVATIVE PSI-SCHEME","EDGE-BASED N-SCHEME LP","EDGE-BASED N-SCHEME","ERIA SCHEME"],
2384 defaut = ["CHARACTERISTICS","CONSERVATIVE PSI-SCHEME","CHARACTERISTICS","CHARACTERISTICS"],
2385 fr = """Choix du schema de convection pour chaque variable
2386 ces coefficients sont respectivement appliques a
2387 1) U et V 2) H 3) T 4) K ET EPSILON
2388 1 : caracteristiques sur h
2390 3 : Schema N conservatif
2391 4 : Schema N conservatif
2392 5 : Schema PSI conservatif
2393 13 : Schema N par segment
2394 14 : Schema N par segment
2396 Second integer must be 5""",
2397 ang = """Choice of advection schemes for every variable
2398 These coefficients are applied respectively to
2399 1) U et V 2) H 3) T 4) K and EPSILON
2402 3: Conservative N-scheme
2403 4: Conservative N-scheme
2404 5: Conservative PSI-scheme
2405 13 : Edge-based N-scheme
2406 14 : Edge-based N-scheme
2408 Second integer must be 5""",
2410 # -----------------------------------
2411 b_TYPE_OF_ADVECTIONG = BLOC(condition="TYPE_OF_ADVECTION != None",
2412 # -----------------------------------
2413 # -----------------------------------
2414 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
2415 # -----------------------------------
2416 defaut = "Choice of space discretisation for every variable. These coefficients are applied respectively to 1) U and V 2) H 3) T 4) K and EPSILON"),
2418 # -----------------------------------
2419 OPTION_FOR_CHARACTERISTICS = SIMP(statut ='o',
2420 # -----------------------------------
2422 into = ["strong","weak"],
2424 fr = """1: forme forte 2: forme faible""",
2425 ang = """1: strong form 2: weak form""",
2427 # -----------------------------------
2428 SUPG_OPTION = SIMP(statut ='o',
2429 # -----------------------------------
2430 typ = 'I', min=0, max='**',
2432 fr = """0:pas de decentrement SUPG 1:SUPG classique 2:SUPG modifiee
2433 ces coefficients sont respectivement appliques a
2434 1) U et V 2) H 3) T 4) K ET EPSILON""",
2435 ang = """0:no upwinding 1: classical SUPG 2:modified SUPG
2436 These coefficients are applied respectively to
2437 1) U et V 2) H 3) T 4) K and EPSILON""",
2439 # -----------------------------------
2440 NUMBER_OF_GAUSS_POINTS_FOR_WEAK_CHARACTERISTICS = SIMP(statut ='f',
2441 # -----------------------------------
2444 fr = """Voir les release notes 6.3""",
2445 ang = """See release notes 6.3""",
2447 # -----------------------------------
2448 MASS_LUMPING_FOR_WEAK_CHARACTERISTICS = SIMP(statut ='o',
2449 # -----------------------------------
2452 fr = """Applique a la matrice de masse""",
2453 ang = """To be applied to the mass matrix""",
2455 # -----------------------------------
2456 b_MAXIMUM_NUMBER_OF_ITERATIONS_FOR_ADVECTION_SCHEMESF = BLOC(condition="(ADVECTION_OF_TRACERS == True and SCHEME_FOR_ADVECTION_OF_TRACERS == 'EDGE-BASED N-SCHEME') or (ADVECTION_OF_K_AND_EPSILON == True and SCHEME_FOR_ADVECTION_OF_K_EPSILON == 'EDGE-BASED N-SCHEME') or (ADVECTION_OF_U_AND_V == True and SCHEME_FOR_ADVECTION_OF_VELOCITIES == 'EDGE-BASED N-SCHEME')",
2457 # -----------------------------------
2459 # -----------------------------------
2460 MAXIMUM_NUMBER_OF_ITERATIONS_FOR_ADVECTION_SCHEMES = SIMP(statut ='o',
2461 # -----------------------------------
2464 fr = """Seulement pour schemes 13 et 14""",
2465 ang = """Only for schemes 13 and 14""",
2467 # -----------------------------------
2468 UPWIND_COEFFICIENTS = SIMP(statut ='o',
2469 # -----------------------------------
2470 typ = 'R', min= 4, max= 4,
2471 defaut = [1.,1.,1.,1],
2472 fr = """Coefficients utilises par la methode S.U.P.G.
2473 ces coefficients sont respectivement appliques a
2478 ang = """Upwind coefficients used by the S.U.P.G. method
2479 These coefficients are applied respectively to
2483 4) K and epsilon""",
2485 # -----------------------------------
2486 MASS_LUMPING_ON_H = SIMP(statut ='o',
2487 # -----------------------------------
2490 fr = """TELEMAC offre la possibilite d''effectuer du mass-lumping
2492 Ceci revient a ramener tout ou partie (suivant la valeur de ce
2493 coefficient) des matrices AM1 (h) ou AM2 (U) et AM3 (V) sur
2495 Cette technique permet d''accelerer le code dans des proportions tres
2496 importantes et de le rendre egalement beaucoup plus stable. Cependant
2497 les solutions obtenues se trouvent lissees.
2498 Ce parametre fixe le taux de mass-lumping effectue sur h.""",
2499 ang = """TELEMAC provides an opportunity to carry out mass-lumping
2500 either on C,H or on the velocity.
2501 This is equivalent to bringing the matrices AM1 (h) or AM2 (U) and
2502 AM3 (V) wholly or partly, back onto their diagonal.
2503 Thanks to that technique, the code can be speeded up to a quite
2504 significant extent and it can also be made much more stable. The
2505 resulting solutions, however, become artificially smoothed.
2506 This parameter sets the extent of mass-lumping that is performed on h.""",
2508 # -----------------------------------
2509 MASS_LUMPING_ON_VELOCITY = SIMP(statut ='o',
2510 # -----------------------------------
2513 fr = """Fixe le taux de mass-lumping effectue sur la vitesse.""",
2514 ang = """Sets the amount of mass-lumping that is performed on the velocity.""",
2516 # -----------------------------------
2517 SCHEME_OPTION_FOR_ADVECTION_OF_VELOCITIES = SIMP(statut ='f',
2518 # -----------------------------------
2521 fr = """Si present remplace et a priorite sur :
2522 OPTION POUR LES CARACTERISTIQUES
2524 Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
2525 3=predicteur-correcteur deuxieme ordre en temps
2527 ang = """If present replaces and has priority over:
2528 OPTION FOR CHARACTERISTICS
2530 if N or PSI SCHEME: 1=explicit 2=predictor-corrector
2531 3= predictor-corrector second-order in time 4= implicit""",
2533 # -----------------------------------
2534 FREE_SURFACE_GRADIENT_COMPATIBILITY = SIMP(statut ='o',
2535 # -----------------------------------
2538 fr = """Des valeurs inferieures a 1 suppriment les oscillations
2540 ang = """Values less than 1 suppress spurious oscillations""",
2542 # -----------------------------------
2543 NUMBER_OF_SUB_ITERATIONS_FOR_NON_LINEARITIES = SIMP(statut ='o',
2544 # -----------------------------------
2547 fr = """Permet de reactualiser, pour un meme pas de temps, les champs
2548 convecteur et propagateur au cours de plusieurs sous-iterations. A la
2549 premiere sous-iteration, ces champs sont donnes par C et le champ de
2550 vitesses au pas de temps precedent. Aux iterations suivantes, ils sont
2551 pris egaux au champ de vitesse obtenu a la fin de la sous-iteration
2552 precedente. Cette technique permet d''ameliorer la prise en compte des
2554 ang = """Used for updating, within one time step, the advection and
2556 upon the first sub-iteration, these fields are given by
2557 C and the velocity field in the previous time step. At subsequent
2558 iterations, the results of the previous sub-iteration is used to
2559 update the advection and propagation field.
2560 The non-linearities can be taken into account through this technique.""",
2562 # -----------------------------------
2563 b_TREATMENT_OF_FLUXES_AT_THE_BOUNDARIESF = BLOC(condition="(ADVECTION_OF_TRACERS == True and SCHEME_FOR_ADVECTION_OF_TRACERS in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME']) or (ADVECTION_OF_K_AND_EPSILON == True and SCHEME_FOR_ADVECTION_OF_K_EPSILON in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME']) or (ADVECTION_OF_U_AND_V == True and SCHEME_FOR_ADVECTION_OF_VELOCITIES in ['EDGE-BASED N-SCHEME','SUPG','CONSERVATIVE N-SCHEME','CONSERVATIVE PSI-SCHEME'])",
2564 # -----------------------------------
2566 # -----------------------------------
2567 TREATMENT_OF_FLUXES_AT_THE_BOUNDARIES = SIMP(statut ='o',
2568 # -----------------------------------
2569 typ = 'TXM', min=0, max='**',
2570 into = ["Priority to prescribed values","Priority to fluxes"],
2571 defaut = ["Priority to prescribed values","Priority to prescribed values"],
2572 fr = """Utilise pour les schemas SUPG, PSI et N, avec option 2, on ne retrouve
2573 pas exactement les valeurs imposees des traceurs, mais le flux est
2575 ang = """Used so far only with the SUPG, PSI and N schemes. With option 2,
2576 Dirichlet prescribed values are not obeyed, but the fluxes are correct""",
2578 # -----------------------------------
2579 NUMBER_OF_CORRECTIONS_OF_DISTRIBUTIVE_SCHEMES = SIMP(statut ='f',
2580 # -----------------------------------
2583 fr = """Pour les options avec predicteur-correcteur""",
2584 ang = """For predictor-corrector options""",
2586 # -----------------------------------
2587 NUMBER_OF_SUB_STEPS_OF_DISTRIBUTIVE_SCHEMES = SIMP(statut ='f',
2588 # -----------------------------------
2591 fr = """ Pour les options predicteur-correcteur avec schema localement
2593 ang = """ Only for implicit scheme with predictor-corrector""",
2595 # -----------------------------------
2596 PSI_SCHEME_OPTION = SIMP(statut ='f',
2597 # -----------------------------------
2599 into = ["explicit","predictor-corrector"],
2600 defaut = "explicit",
2601 fr = """ 1: explicite 2: predicteur-correcteur""",
2602 ang = """ 1: explicit 2: predictor-corrector""",
2605 # -----------------------------------
2606 DIFFUSION = FACT(statut='o',
2607 # -----------------------------------
2608 # -----------------------------------
2609 DIFFUSION_OF_VELOCITY = SIMP(statut ='o',
2610 # -----------------------------------
2613 fr = """Permet de decider si l''on prend ou non en compte la diffusion
2615 ang = """Makes it possible to decide whether the diffusion of velocity
2616 (i.e. viscosity) is taken into account or not.""",
2618 # -----------------------------------
2619 b_DIFFUSION_OF_VELOCITYG = BLOC(condition="DIFFUSION_OF_VELOCITY == True",
2620 # -----------------------------------
2621 # -----------------------------------
2622 IMPLICITATION_FOR_DIFFUSION_OF_VELOCITY = SIMP(statut ='o',
2623 # -----------------------------------
2626 fr = """Fixe la valeur du coefficient d''implicitation sur les termes de
2627 diffusion des vitesses""",
2628 ang = """Sets the value of the implicitation coefficient for the diffusion of
2631 # -----------------------------------
2632 OPTION_FOR_THE_DIFFUSION_OF_VELOCITIES = SIMP(statut ='o',
2633 # -----------------------------------
2635 into = ["div( nu grad(U) )","1/h div ( h nu grad(U)"],
2636 defaut = "div( nu grad(U) )",
2637 fr = """1: Diffusion de la forme div( nu grad(U) )
2638 2: Diffusion de la forme 1/h div ( h nu grad(U) )""",
2639 ang = """1: Diffusion in the form div( nu grad(U) )
2640 2: Diffusion in the form 1/h div ( h nu grad(U) )""",
2644 # -----------------------------------
2645 AUTOMATIC_DIFFERENTIATION = FACT(statut='o',
2646 # -----------------------------------
2647 # -----------------------------------
2648 AD_NUMBER_OF_DERIVATIVES = SIMP(statut ='o',
2649 # -----------------------------------
2652 fr = """Definit le nombre de derivees utilisateurs, dans le cadre
2653 de la differentiation algorithmique.""",
2654 ang = """Defines the number of user derivatives, within the framework
2655 of the algorithmic differentiation.""",
2657 # -----------------------------------
2658 AD_NAMES_OF_DERIVATIVES = SIMP(statut ='f',
2659 # -----------------------------------
2660 typ = 'TXM', min= 2, max= 2,
2661 fr = """Noms des differentiateurs utilisateurs en 32 caracteres,
2662 16 pour le nom, 16 pour l''unite""",
2663 ang = """Name of user differentiators in 32 characters,
2664 16 for the name, 16 for the unit.""",
2667 # -----------------------------------
2668 ADVANCED = FACT(statut='o',
2669 # -----------------------------------
2670 # -----------------------------------
2671 MATRIX_STORAGE = SIMP(statut ='o',
2672 # -----------------------------------
2674 into = ["classical EBE","Edge-based storage"],
2675 defaut = "Edge-based storage",
2676 fr = """1 : EBE classique 3 : Stockage par segments""",
2677 ang = """1 : classical EBE 3 : Edge-based storage""",
2679 # -----------------------------------
2680 MATRIX_VECTOR_PRODUCT = SIMP(statut ='o',
2681 # -----------------------------------
2684 fr = """1 : classique 2 : frontal
2685 attention, avec 2, il faut une numerotation speciale des points""",
2686 ang = """1 : classic 2 : frontal
2687 beware, with option 2, a special numbering of points is required""",
2689 # -----------------------------------
2690 NEWMARK_TIME_INTEGRATION_COEFFICIENT = SIMP(statut ='o',
2691 # -----------------------------------
2694 fr = """1. : Euler explicite 0.5 : ordre 2 en temps""",
2695 ang = """1. : Euler explicit 0.5 : order 2 in time""",
2697 # -----------------------------------
2698 ZERO = SIMP(statut ='f',
2699 # -----------------------------------
2702 fr = """Non active pour l''instant.""",
2703 ang = """Not yet implemented""",
2705 # -----------------------------------
2706 PROPAGATION_OPTION = SIMP(statut ='f',
2707 # -----------------------------------
2710 fr = """Non active pour l''instant.""",
2711 ang = """Not yet implemented.""",
2713 # -----------------------------------
2714 OPTION_OF_THE_HYDROSTATIC_RECONSTRUCTION = SIMP(statut ='f',
2715 # -----------------------------------
2718 fr = """donne l option de la reconstruction hydrostatique
2719 (option utile uniquement pour les volumes finis):
2720 1: option d Audusse, 2: option de Noelle""",
2721 ang = """gives the option for hydrostatic reconstruction
2722 (used only for finite volumes):
2723 1: option of Audusse, 2: option of Noelle""",
2727 # -----------------------------------------------------------------------
2728 TURBULENCE = PROC(nom= "TURBULENCE",op = None,
2729 # -----------------------------------------------------------------------
2730 UIinfo = {"groupes": ("CACHE")},
2731 # -----------------------------------
2732 VELOCITY_DIFFUSIVITY = SIMP(statut ='o',
2733 # -----------------------------------
2736 fr = """Fixe de facon uniforme pour l''ensemble du domaine;
2737 la valeur du coefficient de diffusion de viscosite globale (dynamique +
2738 turbulente). Cette valeur peut avoir une influence non negligeable sur
2739 la forme et la taille des recirculations.""",
2740 ang = """Sets, in an even way for the whole domain, the value of the
2741 coefficient of global (dynamic+turbulent) viscosity. this value may
2742 have a significant effect both on the shapes and sizes of
2743 recirculation zones.""",
2745 # -----------------------------------
2746 TURBULENCE_MODEL = SIMP(statut ='o',
2747 # -----------------------------------
2749 into = ["CONSTANT VISCOSITY","ELDER","K-EPSILON MODEL","SMAGORINSKI","MIXING LENGTH","SPALART-ALLMARAS"],
2750 defaut = "CONSTANT VISCOSITY",
2751 fr = """3 choix sont possibles actuellement : viscosite constante (1)
2752 modele de Elder (2) ou modele k-epsilon (3).
2753 Attention : si on choisit l''option 1
2754 il ne faut pas oublier d''ajuster la valeur du mot-cle COEFFICIENT DE
2755 DIFFUSION DES VITESSES.
2756 si on choisit l''option 2
2757 il ne faut pas oublier d''ajuster les deux valeurs du mot-cle :
2758 COEFFICIENTS ADIMENSIONNELS DE DISPERSION
2759 Si on choisit l''option 3;
2760 ce meme parametre doit retrouver sa vraie valeur physique car elle est
2761 utilisee comme telle dans le modele de turbulence""",
2762 ang = """The current alternatives are as follows: constant viscosity (1)
2763 elder''s model (2) or k-epsilon model (3).
2764 NOTE: when option 1 is chosen, it should be kept in mind that the
2765 value of the keyword VELOCITY DIFFUSIVITY has to be ajusted.
2766 When option 2 is chosen, the two values of key-word :
2767 NON-DIMENSIONAL DISPERSION COEFFICIENTS are used
2768 When option 3 is chosen, this parameter should recover its true
2769 physical value, since it is used as such in the turbulence model.""",
2771 # -----------------------------------
2772 b_TURBULENCE_MODELG = BLOC(condition="TURBULENCE_MODEL == 'CONSTANT VISCOSITY'",
2773 # -----------------------------------
2775 # -----------------------------------
2776 b_TURBULENCE_MODELH = BLOC(condition="TURBULENCE_MODEL == 'Elder'",
2777 # -----------------------------------
2778 # -----------------------------------
2779 NON_DIMENSIONAL_DISPERSION_COEFFICIENTS = SIMP(statut ='o',
2780 # -----------------------------------
2781 typ = 'R', min= 2, max= 2,
2783 fr = """Coefficients longitudinal et transversal dans la formule de
2784 Elder. Utilises uniquement avec le modele de turbulence 2""",
2785 ang = """Longitudinal and transversal coefficients in elder s formula.
2786 Used only with turbulence model number 2""",
2789 # -----------------------------------
2790 SOLVER_INFO = FACT(statut='o',
2791 # -----------------------------------
2792 # -----------------------------------
2793 SOLVER_FOR_K_EPSILON_MODEL = SIMP(statut ='o',
2794 # -----------------------------------
2796 into = ["conjugate gradient","conjugate residuals","conjugate gradient on normal equation","minimum error","conjugate gradient squared","conjugate gradient squared stabilised (cgstab)","gmres (see option for the solver for k-epsilon model)","direct"],
2797 defaut = "conjugate gradient",
2798 fr = """Permet de choisir le solveur utilise pour la resolution
2799 du systeme du modele k-epsilon :
2800 1 : gradient conjugue
2802 3 : gradient conjugue sur equation normale
2804 5 : gradient conjugue carre
2805 6 : gradient conjugue carre stabilise (cgstab)
2806 7 : gmres (voir aussi option du solveur pour le modele k-epsilon)
2808 ang = """Makes it possible to select the solver used for solving
2809 the system of the k-epsilon model.
2810 1: conjugate gradient
2811 2: conjugate residuals
2812 3: conjugate gradient on normal equation
2814 5: conjugate gradient squared
2815 6: conjugate gradient squared stabilised (cgstab)
2816 7: gmres (see option for the solver for k-epsilon model)
2819 # -----------------------------------
2820 OPTION_FOR_THE_SOLVER_FOR_K_EPSILON_MODEL = SIMP(statut ='o',
2821 # -----------------------------------
2824 fr = """si le solveur est GMRES (7) le mot cle est la dimension de
2825 l''espace de KRILOV (valeurs conseillees entre 2 et 15)""",
2826 ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
2827 TRY VALUES BETWEEN 2 AND 15""",
2829 # -----------------------------------
2830 PRECONDITIONING_FOR_K_EPSILON_MODEL = SIMP(statut ='o',
2831 # -----------------------------------
2833 into = ["diagonal","no preconditioning","crout","diagonal and crout"],
2834 defaut = "diagonal",
2835 fr = """Permet de preconditionner le systeme relatif au
2837 0 : pas de preconditionnement;
2838 2 : preconditionnement diagonal.
2839 7 : preconditionnement de Crout par element.""",
2840 ang = """Preconditioning of the linear system in the diffusion step of
2841 the k-epsilon model.
2842 0: no preconditioning
2843 2: diagonal preconditioning
2844 7: Crout''s preconditioning per element""",
2847 # -----------------------------------
2848 ADVANCED = FACT(statut='o',
2849 # -----------------------------------
2850 # -----------------------------------
2851 TURBULENCE_REGIME_FOR_SOLID_BOUNDARIES = SIMP(statut ='f',
2852 # -----------------------------------
2854 into = ["smooth","rough"],
2856 fr = """ Permet de choisir le regime de turbulence aux parois 1 : regime
2857 turbulent lisse. 2 : regime turbulent rugueux.""",
2858 ang = """ Provided for selecting the type of friction on the walls 1: smooth 2:
2861 # -----------------------------------
2862 INFORMATION_ABOUT_K_EPSILON_MODEL = SIMP(statut ='o',
2863 # -----------------------------------
2866 fr = """Donne le nombre d''iterations du solveur de l''etape de
2867 diffusion et termes sources du modele k-epsilon.""",
2868 ang = """Gives the number of iterations of the solver in the diffusion
2869 and source terms step of the k-epsilon model.""",
2871 # -----------------------------------
2872 ADVECTION_OF_K_AND_EPSILON = SIMP(statut ='o',
2873 # -----------------------------------
2876 fr = """Prise en compte ou non de la convection de k et epsilon.""",
2877 ang = """The k and epsilon advection is taken into account or ignored.""",
2879 # -----------------------------------
2880 b_ADVECTION_OF_K_AND_EPSILONG = BLOC(condition="ADVECTION_OF_K_AND_EPSILON == True",
2881 # -----------------------------------
2882 # -----------------------------------
2883 SCHEME_FOR_ADVECTION_OF_K_EPSILON = SIMP(statut ='f',
2884 # -----------------------------------
2886 into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","LEO POSTMA FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME FOR TIDAL FLATS"],
2887 defaut = "CHARACTERISTICS",
2888 fr = """Choix du schema de convection pour k et epsilon,
2889 remplace FORME DE LA CONVECTION""",
2890 ang = """Choice of the advection scheme for k and epsilon,
2891 replaces TYPE OF ADVECTION""",
2894 # -----------------------------------
2895 SCHEME_OPTION_FOR_ADVECTION_OF_K_EPSILON = SIMP(statut ='f',
2896 # -----------------------------------
2899 fr = """Si present remplace et a priorite sur :
2900 OPTION POUR LES CARACTERISTIQUES
2902 Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
2903 3=predicteur-correcteur deuxieme ordre en temps
2905 ang = """If present replaces and has priority over:
2906 OPTION FOR CHARACTERISTICS
2908 if N or PSI SCHEME: 1=explicit 2=predictor-corrector
2909 3= predictor-corrector second-order in time 4= implicit""",
2911 # -----------------------------------
2912 TIME_STEP_REDUCTION_FOR_K_EPSILON_MODEL = SIMP(statut ='f',
2913 # -----------------------------------
2916 fr = """Coefficient reducteur du pas de temps pour le modele k-epsilon (qui
2917 est normalement identique a celui du systeme hydrodynamique).
2918 Utilisation deconseillee""",
2919 ang = """Time step reduction coefficient for k-epsilon model (which is normally
2920 same the same as that of the hydrodynamic system) Not recommended for
2924 # -----------------------------------
2925 ACCURACY = FACT(statut='o',
2926 # -----------------------------------
2927 # -----------------------------------
2928 ACCURACY_OF_K = SIMP(statut ='o',
2929 # -----------------------------------
2932 fr = """Fixe la precision demandee sur k pour le test d''arret dans
2933 l''etape de diffusion et termes sources du modele k-epsilon.""",
2934 ang = """Sets the required accuracy for computing k in the diffusion
2935 and source terms step of the k-epsilon model.""",
2937 # -----------------------------------
2938 ACCURACY_OF_EPSILON = SIMP(statut ='o',
2939 # -----------------------------------
2942 fr = """Fixe la precision demandee sur epsilon pour le test d''arret
2943 dans l''etape de diffusion et termes sources de k et epsilon.""",
2944 ang = """Sets the required accuracy for computing epsilon in
2945 the diffusion and source-terms step of the k-epsilon model.""",
2947 # -----------------------------------
2948 MAXIMUM_NUMBER_OF_ITERATIONS_FOR_K_AND_EPSILON = SIMP(statut ='o',
2949 # -----------------------------------
2952 fr = """Fixe le nombre maximum d''iterations accepte lors de la
2953 resolution du systeme diffusion-termes sources du modele k-epsilon.""",
2954 ang = """Sets the maximum number of iterations that are acceptable when
2955 solving the diffusion source-terms step of the k-epsilon model.""",
2959 # -----------------------------------------------------------------------
2960 TIDAL_FLATS_INFO = PROC(nom= "TIDAL_FLATS_INFO",op = None,
2961 # -----------------------------------------------------------------------
2962 # -----------------------------------
2963 TIDAL_FLATS = SIMP(statut ='o',
2964 # -----------------------------------
2967 fr = """permet de supprimer les tests sur les bancs decouvrants, dans
2968 les cas ou l''on est certain qu''il n''y en aura pas.
2969 En cas de doute : oui""",
2970 ang = """When no, the specific
2971 treatments for tidal flats are by-passed.
2972 This spares time, but of course you must be sure that you have no
2975 # -----------------------------------
2976 b_TIDAL_FLATSG = BLOC(condition="TIDAL_FLATS == True",
2977 # -----------------------------------
2978 # -----------------------------------
2979 OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATS = SIMP(statut ='o',
2980 # -----------------------------------
2982 into = ["EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS","DRY ELEMENTS FROZEN","LIKE 1 BUT WITH POROSITY (DEFINA METHOD)"],
2983 defaut = "EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS",
2984 fr = """Utilise si BANCS DECOUVRANTS est vrai
2985 1 : EQUATIONS RESOLUES PARTOUT AVEC
2986 CORRECTION SUR LES BANCS DECOUVRANTS
2987 2 : GEL DES ELEMENTS DECOUVRANTS
2988 3 : COMME 1 MAIS AVEC POROSITE (METHODE DEFINA)""",
2989 ang = """Used if TIDAL FLATS is true
2990 1 : EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS
2991 2 : DRY ELEMENTS FROZEN
2992 3 : LIKE 1 BUT WITH POROSITY (DEFINA METHOD)""",
2994 # -----------------------------------
2995 b_OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATSG = BLOC(condition="OPTION_FOR_THE_TREATMENT_OF_TIDAL_FLATS == 'EQUATIONS SOLVED EVERYWHERE WITH CORRECTION ON TIDAL FLATS'",
2996 # -----------------------------------
2997 # -----------------------------------
2998 TREATMENT_OF_NEGATIVE_DEPTHS = SIMP(statut ='o',
2999 # -----------------------------------
3001 into = ["SMOOTHING","FLUX CONTROL","FLUX CONTROL (ERIA)"],
3002 defaut = "SMOOTHING",
3003 fr = """Seulement avec OPTION DE TRAITEMENT DES BANCS DECOUVRANTS = 1
3004 0 : pas de traitement
3006 2 : limitation des flux, approche par segment
3007 3 : limitation des flux, approche par triangle""",
3008 ang = """Only with OPTION FOR THE TREATMENT OF TIDAL FLATS=1
3011 2:flux control, by segment
3012 3:flux control, by element""",
3015 # -----------------------------------
3016 THRESHOLD_FOR_NEGATIVE_DEPTHS = SIMP(statut ='o',
3017 # -----------------------------------
3020 fr = """En dessous du seuil, les hauteurs negatives sont lissees""",
3021 ang = """Below the threshold the negative depths are smoothed""",
3023 # -----------------------------------
3024 THRESHOLD_DEPTH_FOR_RECEDING_PROCEDURE = SIMP(statut ='o',
3025 # -----------------------------------
3028 fr = """Si > 0., declenche la procedure de ressuyage qui evite le
3029 franchissement parasite des digues mal discretisees""",
3030 ang = """If > 0., will trigger the receding procedure that avoids overwhelming
3031 of dykes which are too loosely discretised""",
3033 # -----------------------------------
3034 H_CLIPPING = SIMP(statut ='o',
3035 # -----------------------------------
3038 fr = """Determine si l''on desire ou non limiter par valeur inferieure
3039 la hauteur d''eau H (dans le cas des bancs decouvrants par exemple).""",
3040 ang = """Determines whether limiting the water depth H by a lower value
3041 desirable or not. (for instance in the case of tidal flats)
3042 This key-word may have an influence on mass conservation since
3043 the truncation of depth is equivalent to adding mass.""",
3045 # -----------------------------------
3046 b_H_CLIPPINGG = BLOC(condition="H_CLIPPING == True",
3047 # -----------------------------------
3048 # -----------------------------------
3049 MINIMUM_VALUE_OF_DEPTH = SIMP(statut ='o',
3050 # -----------------------------------
3053 fr = """Fixe la valeur minimale de a lorsque l''option CLIPPING DE H est
3055 ang = """Sets the minimum H value when option H CLIPPING is implemented. Not
3056 fully implemented.""",
3061 # -----------------------------------------------------------------------
3062 TRACERS = PROC(nom= "TRACERS",op = None,
3063 # -----------------------------------------------------------------------
3064 # -----------------------------------
3065 BOUNDARY_CONDITIONS_FOR_TRACERS = FACT(statut='f',
3066 # -----------------------------------
3067 # -----------------------------------
3068 PRESCRIBED_TRACERS_VALUES = SIMP(statut ='o',
3069 # -----------------------------------
3070 typ = 'R', max='**',
3071 fr = """Valeurs du traceur imposees aux frontieres liquides entrantes.
3072 Lire la partie du mode d''emploi consacree aux conditions aux limites""",
3073 ang = """Tracer values prescribed at the inflow boundaries.
3074 Read the usermanual section dealing with the boundary conditions""",
3077 # -----------------------------------
3078 SETTING = FACT(statut='o',
3079 # -----------------------------------
3080 # -----------------------------------
3081 NUMBER_OF_TRACERS = SIMP(statut ='o',
3082 # -----------------------------------
3085 fr = """Definit le nombre de traceurs.""",
3086 ang = """Defines the number of tracers""",
3088 # -----------------------------------
3089 NAMES_OF_TRACERS = SIMP(statut ='o',
3090 # -----------------------------------
3091 typ = 'TXM', min=0, max='**',
3092 fr = """Noms des traceurs en 32 caracteres, 16 pour le nom 16 pour l''unite""",
3093 ang = """Name of tracers in 32 characters, 16 for the name, 16 for the unit.""",
3095 # -----------------------------------
3096 INITIAL_VALUES_OF_TRACERS = SIMP(statut ='o',
3097 # -----------------------------------
3098 typ = 'R', min=0, max='**',
3100 fr = """Fixe la valeur initiale du traceur.""",
3101 ang = """Sets the initial value of the tracer.""",
3103 # -----------------------------------
3104 DENSITY_EFFECTS = SIMP(statut ='o',
3105 # -----------------------------------
3108 fr = """PRISE EN COMPTE DU GRADIENT HORIZONTAL DE DENSITE
3109 LE TRACEUR EST ALORS LA SALINITE""",
3110 ang = """THE HORIZONTAL GRADIENT OF DENSITY IS TAKEN INTO ACCOUNT
3111 THE TRACER IS THEN THE SALINITY""",
3113 # -----------------------------------
3114 b_DENSITY_EFFECTSG = BLOC(condition="DENSITY_EFFECTS == True",
3115 # -----------------------------------
3116 # -----------------------------------
3117 MEAN_TEMPERATURE = SIMP(statut ='o',
3118 # -----------------------------------
3121 fr = """TEMPERATURE DE REFERENCE POUR LE CALCUL DES EFFETS DE DENSITE
3122 A UTILISER AVEC LE MOT-CLE EFFETS DE DENSITE""",
3123 ang = """REFERENCE TEMPERATURE FOR DENSITY EFFECTS
3124 TO BE USED WITH THE KEY-WORD DENSITY EFFECTS""",
3127 # -----------------------------------
3128 b_DENSITY_EFFECTSH = BLOC(condition="DENSITY_EFFECTS == True",
3129 # -----------------------------------
3130 # -----------------------------------
3131 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
3132 # -----------------------------------
3133 defaut = "The first tracer must be the salinity in kg/m3"),
3136 # -----------------------------------
3137 SOLVER_TRA = FACT(statut='o',
3138 # -----------------------------------
3139 # -----------------------------------
3140 SOLVER_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3141 # -----------------------------------
3142 typ = 'TXM', min=0, max='**',
3143 into = ["conjugate gradient","conjugate residual","conjugate gradient on a normal equation","minimum error","squared conjugate gradient","cgstab","gmres (see option for the solver for tracer diffusion)","direct"],
3144 defaut = ["conjugate gradient","conjugate gradient"],
3145 fr = """ 1 : gradient conjugue 2 : residu conjugue 3 : gradient conjugue sur
3146 equation normale 4 : erreur minimale 5 : gradient conjugue carre""",
3147 ang = """ 1 : conjugate gradient 2 : conjugate gradient 3 : conjugate gradient
3148 on a normal equation 4 : minimum error 5 : squared conjugate gradient 6
3149 : cgstab 7 : gmres (see option for the solver for tracer diffusion) 8 :
3152 # -----------------------------------
3153 SOLVER_OPTION_FOR_TRACERS_DIFFUSION = SIMP(statut ='o',
3154 # -----------------------------------
3155 typ = 'I', min=0, max='**',
3157 fr = """si le solveur est GMRES (7) le mot cle est la dimension de
3158 l''espace de KRILOV (valeurs conseillees entre 2 et 15)""",
3159 ang = """WHEN GMRES (7) IS CHOSEN, DIMENSION OF THE KRYLOV SPACE
3160 TRY VALUES BETWEEN 2 AND 15""",
3162 # -----------------------------------
3163 PRECONDITIONING_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3164 # -----------------------------------
3165 typ = 'TXM', min=0, max='**',
3166 into = ["no preconditioning ","diagonal","crout","diagonal and crout"],
3167 defaut = ["diagonal"],
3168 fr = """Permet de preconditionner le systeme relatif au traceur.
3169 Memes definition et possibilites que pour le mot-cle
3171 0 : pas de preconditionnement;
3172 2 : preconditionnement diagonal.
3173 7 : Crout par element""",
3174 ang = """Preconditioning of the linear system in the tracer diffusion
3176 Same definition and possibilities as for the keyword PRECONDITIONING
3177 0: no preconditioning
3178 2: diagonal preconditioning
3179 7: Crout''s preconditioning per element.""",
3182 # -----------------------------------
3183 ACCURACY_TRA = FACT(statut='o',
3184 # -----------------------------------
3185 # -----------------------------------
3186 ACCURACY_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3187 # -----------------------------------
3190 fr = """Fixe la precision demandee pour le calcul de la diffusion
3192 ang = """Sets the required accuracy for computing the tracer
3195 # -----------------------------------
3196 MAXIMUM_NUMBER_OF_ITERATIONS_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3197 # -----------------------------------
3200 fr = """ Limite le nombre d''iterations du solveur a chaque pas de temps pour
3201 le calcul de la diffusion du traceur.""",
3202 ang = """Limits the number of solver iterations at each time step for
3203 the diffusion of tracer.""",
3206 # -----------------------------------
3207 SOURCES_TRA = FACT(statut='f',
3208 # -----------------------------------
3209 # -----------------------------------
3210 VALUES_OF_THE_TRACERS_AT_THE_SOURCES = SIMP(statut ='o',
3211 # -----------------------------------
3212 typ = 'R', min=0, max='**',
3213 fr = """Valeurs des traceurs a chacune des sources""",
3214 ang = """Values of the tracers at the sources""",
3217 # -----------------------------------
3218 METEOROLOGY_TRA = FACT(statut='f',
3219 # -----------------------------------
3220 # -----------------------------------
3221 VALUES_OF_TRACERS_IN_THE_RAIN = SIMP(statut ='o',
3222 # -----------------------------------
3223 typ = 'R', min=0, max='**',
3224 fr = """generalement ce traceur est la temperature, dans ce cas
3225 cette valeur est a modifier, sinon la valeur 0 est raisonnable""",
3226 ang = """most often, this tracer is temperature, in this case
3227 this value should be modified, otherwise, default value of 0 seems
3231 # -----------------------------------
3232 NUMERICAL = FACT(statut='o',
3233 # -----------------------------------
3234 # -----------------------------------
3235 ADVECTION_OF_TRACERS = SIMP(statut ='o',
3236 # -----------------------------------
3239 fr = """Prise en compte ou non de la convection du traceur passif.""",
3240 ang = """The advection of the passive tracer is taken into account
3243 # -----------------------------------
3244 b_ADVECTION_OF_TRACERSG = BLOC(condition="ADVECTION_OF_TRACERS == True",
3245 # -----------------------------------
3246 # -----------------------------------
3247 SCHEME_FOR_ADVECTION_OF_TRACERS = SIMP(statut ='f',
3248 # -----------------------------------
3249 typ = 'TXM', min=0, max='**',
3250 into = ["NO ADVECTION","CHARACTERISTICS","EXPLICIT + SUPG","EXPLICIT LEO POSTMA","EXPLICIT + MURD SCHEME N","EXPLICIT + MURD SCHEME PSI","LEO POSTMA FOR TIDAL FLATS","N-SCHEME FOR TIDAL FLATS","ERIA SCHEME FOR TIDAL FLATS"],
3251 defaut = ["CHARACTERISTICS"],
3252 fr = """Choix du schema de convection pour les traceurs,
3253 remplace FORME DE LA CONVECTION""",
3254 ang = """Choice of the advection scheme for the tracers,
3255 replaces TYPE OF ADVECTION""",
3258 # -----------------------------------
3259 IMPLICITATION_COEFFICIENT_OF_TRACERS = SIMP(statut ='o',
3260 # -----------------------------------
3263 fr = """Fixe la valeur du coefficient d''implicitation du traceur""",
3264 ang = """Sets the value of the implicitation coefficient
3267 # -----------------------------------
3268 DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3269 # -----------------------------------
3272 fr = """Prise en compte ou non de la diffusion du traceur passif.""",
3273 ang = """The diffusion of the passive tracer is taken into account
3276 # -----------------------------------
3277 b_DIFFUSION_OF_TRACERSG = BLOC(condition="DIFFUSION_OF_TRACERS == True",
3278 # -----------------------------------
3279 # -----------------------------------
3280 COEFFICIENT_FOR_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3281 # -----------------------------------
3282 typ = 'R', min=0, max='**',
3284 fr = """Fixe la valeur du coefficient de diffusion du traceur.
3285 L''influence de ce parametre sur l''evolution du traceur dans
3286 le temps est importante.""",
3287 ang = """Sets the value of the tracer diffusivity.""",
3290 # -----------------------------------
3291 OPTION_FOR_THE_DIFFUSION_OF_TRACERS = SIMP(statut ='o',
3292 # -----------------------------------
3293 typ = 'TXM', min=0, max='**',
3294 into = ["div( nu grad(T) )","1/h div ( h nu grad(T)"],
3295 defaut = ["div( nu grad(T) )"],
3296 fr = """1: Diffusion de la forme div( nu grad(T) )
3297 2: Diffusion de la forme 1/h div ( h nu grad(T) )""",
3298 ang = """1: Diffusion in the form div( nu grad(T) )
3299 2: Diffusion in the form 1/h div ( h nu grad(T) )""",
3301 # -----------------------------------
3302 SCHEME_OPTION_FOR_ADVECTION_OF_TRACERS = SIMP(statut ='o',
3303 # -----------------------------------
3304 typ = 'I', min=0, max='**',
3306 fr = """Si present remplace et a priorite sur :
3307 OPTION POUR LES CARACTERISTIQUES
3309 Si schema PSI ou N : 1=explicite 2=predicteur-correcteur
3310 3=predicteur-correcteur deuxieme ordre en temps
3312 ang = """If present replaces and has priority over:
3313 OPTION FOR CHARACTERISTICS
3315 if N or PSI SCHEME: 1=explicit 2=predictor-corrector
3316 3= predictor-corrector second-order in time 4= implicit""",
3318 # -----------------------------------
3319 MASS_LUMPING_ON_TRACERS = SIMP(statut ='o',
3320 # -----------------------------------
3323 fr = """Fixe le taux de mass-lumping effectue sur le traceur.""",
3324 ang = """Sets the amount of mass-lumping that is performed on
3328 # -----------------------------------
3329 DEGRADATION = FACT(statut='o',
3330 # -----------------------------------
3331 # -----------------------------------
3332 LAW_OF_TRACERS_DEGRADATION = SIMP(statut ='o',
3333 # -----------------------------------
3334 typ = 'TXM', min=0, max='**',
3335 into = ["NO DEGRADATION","F(T90) LAW"],
3336 defaut = ["NO DEGRADATION","NO DEGRADATION"],
3337 fr = """Prise en compte d''une loi de decroissance des traceurs""",
3338 ang = """Take in account a law for tracers decrease""",
3340 # -----------------------------------
3341 b_LAW_OF_TRACERS_DEGRADATIONG = BLOC(condition="'F(T90) LAW' in LAW_OF_TRACERS_DEGRADATION",
3342 # -----------------------------------
3343 # -----------------------------------
3344 COEFFICIENT_1_FOR_LAW_OF_TRACERS_DEGRADATION = SIMP(statut ='o',
3345 # -----------------------------------
3346 typ = 'R', min=0, max='**',
3347 fr = """Coefficient 1 de la loi de decroissance des traceurs""",
3348 ang = """Coefficient 1 of law for tracers decrease""",
3353 # -----------------------------------------------------------------------
3354 PARTICLE_TRANSPORT = PROC(nom= "PARTICLE_TRANSPORT",op = None,
3355 # -----------------------------------------------------------------------
3356 # -----------------------------------
3357 DROGUES = FACT(statut='f',
3358 # -----------------------------------
3359 # -----------------------------------
3360 NUMBER_OF_DROGUES = SIMP(statut ='o',
3361 # -----------------------------------
3364 fr = """Permet d''effectuer un suivi de flotteurs""",
3365 ang = """Number of drogues in the computation.
3366 The user must then fill the subroutine FLOT specifying
3367 the coordinates of the starting points, their departure
3369 The trajectory of drogues is recorded in the BINARY RESULTS
3370 FILE that must be given in the steering file""",
3372 # -----------------------------------
3373 b_NUMBER_OF_DROGUESG = BLOC(condition="NUMBER_OF_DROGUES != 0",
3374 # -----------------------------------
3375 # -----------------------------------
3376 DROGUES_FILE = SIMP(statut ='o',
3377 # -----------------------------------
3378 typ = ('Fichier','All Files (*)','Sauvegarde'),
3380 fr = """Fichier de resultat avec les positions des flotteurs""",
3381 ang = """Results file with positions of drogues""",
3383 # -----------------------------------
3384 PRINTOUT_PERIOD_FOR_DROGUES = SIMP(statut ='o',
3385 # -----------------------------------
3388 fr = """Nombre de pas de temps entre 2 sorties de positions de
3389 flotteurs dans le fichier des resultats binaire supplementaire
3390 N affecte pas la qualite du calcul de la trajectoire""",
3391 ang = """Number of time steps between 2 outputs of drogues
3392 positions in the binary file""",
3396 # -----------------------------------
3397 ALGAES = FACT(statut='f',
3398 # -----------------------------------
3399 # -----------------------------------
3400 ALGAE_TRANSPORT_MODEL = SIMP(statut ='o',
3401 # -----------------------------------
3404 fr = """Si oui, les flotteurs seront des algues""",
3405 ang = """If yes, the floats or particles will be algae""",
3407 # -----------------------------------
3408 b_ALGAE_TRANSPORT_MODELG = BLOC(condition="ALGAE_TRANSPORT_MODEL == True",
3409 # -----------------------------------
3410 # -----------------------------------
3411 ALGAE_TYPE = SIMP(statut ='o',
3412 # -----------------------------------
3414 into = ["SPHERE","IRIDAEA FLACCIDA (CLOSE TO ULVA)","PELVETIOPSIS LIMITATA","GIGARTINA LEPTORHYNCHOS"],
3416 fr = """Type des algues. Pour le choix 1 les algues seront
3417 modelisees comme des spheres, pour les autres choix voir Gaylord
3419 ang = """Algae type. For choice 1 the algae particles will be
3420 modeled as spheres, and for the other choices see Gaylord et
3423 # -----------------------------------
3424 DIAMETRE_OF_ALGAE = SIMP(statut ='o',
3425 # -----------------------------------
3428 fr = """Diametre des algues en m""",
3429 ang = """Diametre of algae in m""",
3431 # -----------------------------------
3432 DENSITY_OF_ALGAE = SIMP(statut ='o',
3433 # -----------------------------------
3436 fr = """Masse volumique des algues en kg/m3""",
3437 ang = """Density of algae in kg/m3""",
3439 # -----------------------------------
3440 THICKNESS_OF_ALGAE = SIMP(statut ='o',
3441 # -----------------------------------
3444 fr = """Epaisseur des algues en m""",
3445 ang = """Thickness of algae in m""",
3449 # -----------------------------------
3450 OIL_SPILL = FACT(statut='f',
3451 # -----------------------------------
3452 # -----------------------------------
3453 OIL_SPILL_MODEL = SIMP(statut ='o',
3454 # -----------------------------------
3457 fr = """POUR DECLENCHER LE MODELE DE DERIVE DE NAPPES, DANS
3458 CE CAS LE FICHIER DE COMMANDES MIGRHYCAR EST NECESSAIRE""",
3459 ang = """WILL TRIGGER THE OIL SPILL MODEL, IN THIS CASE
3460 THE MIGRHYCAR STEERING FILE IS NEEDED""",
3462 # -----------------------------------
3463 b_OIL_SPILL_MODELG = BLOC(condition="OIL_SPILL_MODEL == True",
3464 # -----------------------------------
3465 # -----------------------------------
3466 OIL_SPILL_STEERING_FILE = SIMP(statut ='o',
3467 # -----------------------------------
3468 typ = ('Fichier','All Files (*)'),
3470 fr = """Contient les donnees pour le modele de derive de nappes""",
3471 ang = """Contains data for the oil spill model""",
3475 # -----------------------------------
3476 BROWNIAN_MOTION = FACT(statut='f',
3477 # -----------------------------------
3478 # -----------------------------------
3479 STOCHASTIC_DIFFUSION_MODEL = SIMP(statut ='o',
3480 # -----------------------------------
3482 into = ["No model","brownian movement"],
3483 defaut = "No model",
3484 fr = """Pour les particules : flotteurs, hydrocarbures""",
3485 ang = """Meant for particles: drogues, oil spills""",
3488 # -----------------------------------
3489 LAGRANGIAN_DRIFTS = FACT(statut='f',
3490 # -----------------------------------
3491 # -----------------------------------
3492 NUMBER_OF_LAGRANGIAN_DRIFTS = SIMP(statut ='o',
3493 # -----------------------------------
3496 fr = """Permet d''effectuer simultanement plusieurs calculs de derives
3497 lagrangiennes initiees a des pas differents""",
3498 ang = """Provided for performing several computations of lagrangian
3499 drifts starting at different times.
3500 Add A and G in the VARIABLES FOR GRAPHIC PRINTOUTS key-word""",
3502 # -----------------------------------
3503 b_NUMBER_OF_LAGRANGIAN_DRIFTSG = BLOC(condition="NUMBER_OF_LAGRANGIAN_DRIFS != 0",
3504 # -----------------------------------
3505 # -----------------------------------
3506 Consigne = SIMP(statut ="o", homo="information", typ="TXM",
3507 # -----------------------------------
3508 defaut = "Add 'drift along x (m)' and 'drift along y (m)' in VARIABLES FOR GRAPHIC PRINTOUTS"),
3512 # -----------------------------------------------------------------------
3513 HYDRAULIC_STRUCTURES = PROC(nom= "HYDRAULIC_STRUCTURES",op = None,
3514 # -----------------------------------------------------------------------
3515 # -----------------------------------
3516 WEIRS = FACT(statut='f',
3517 # -----------------------------------
3518 # -----------------------------------
3519 NUMBER_OF_WEIRS = SIMP(statut ='o',
3520 # -----------------------------------
3523 fr = """Nombre de seuils qui seront traites par des conditions aux
3524 limites. Ces seuils doivent etre decrits comme des frontieres du
3525 domaine de calcul, et leurs caracteristiques sont donnees dans le
3526 fichier de donnees des seuils (voir la documentation ecrite)""",
3527 ang = """Number of weirs that will be treated by boundary conditions.
3528 They must be described as boundaries of the domain and their features
3529 are given in the weir data file (see written documentation)""",
3531 # -----------------------------------
3532 b_NUMBER_OF_WEIRSG = BLOC(condition="NUMBER_OF_WEIRS != 0",
3533 # -----------------------------------
3534 # -----------------------------------
3535 WEIRS_DATA_FILE = SIMP(statut ='o',
3536 # -----------------------------------
3537 typ = ('Fichier','All Files (*)'),
3539 fr = """Fichier de description des seuils presents dans le modele""",
3540 ang = """Description of weirs existing in the model""",
3542 # -----------------------------------
3543 TYPE_OF_WEIRS = SIMP(statut ='o',
3544 # -----------------------------------
3546 into = ["HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM","GENERAL"],
3547 defaut = "HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM",
3548 fr = """Methode de traitement des seuils. Deux Solutions:
3549 - HORIZONTAL AVEC MEME NOMBRE DE NOEUDS AMONT/AVAL (Solution historique
3551 - GENERALE (Nouvelle solution avec pts sources)""",
3552 ang = """Method for treatment of weirs. Two options:
3553 - HORIZONTAL WITH SAME NUMBER OF NODES UPSTREAM/DOWNSTREAM (Historical
3555 - GENERAL (New solution with sources points""",
3559 # -----------------------------------
3560 SIPHONS = FACT(statut='f',
3561 # -----------------------------------
3562 # -----------------------------------
3563 NUMBER_OF_SIPHONS = SIMP(statut ='f',
3564 # -----------------------------------
3567 fr = """Nombre de siphons traites comme des termes sources ou
3568 puits. Ces siphons doivent etre decrits comme des sources dans le
3569 fichier cas. Leurs caracteristiques sont donnees dans le
3570 fichier de donnees des siphons (voir la documentation ecrite)""",
3571 ang = """Number of siphons treated as source terms.
3572 They must be described as sources in the domain and their features
3573 are given in the culvert data file (see written documentation)""",
3575 # -----------------------------------
3576 b_NUMBER_OF_SIPHONSG = BLOC(condition="NUMBER_OF_SIPHONS != 0",
3577 # -----------------------------------
3578 # -----------------------------------
3579 SIPHONS_DATA_FILE = SIMP(statut ='o',
3580 # -----------------------------------
3581 typ = ('Fichier','All Files (*)'),
3583 fr = """Fichier de description des siphons presents dans le modele""",
3584 ang = """Description of culvert existing in the model""",
3588 # -----------------------------------
3589 CULVERTS = FACT(statut='f',
3590 # -----------------------------------
3591 # -----------------------------------
3592 NUMBER_OF_CULVERTS = SIMP(statut ='o',
3593 # -----------------------------------
3596 fr = """Nombre de buses ou ponts traites comme des termes sources ou
3597 puits. Ces buses doivent etre decrits comme des sources dans le
3598 fichier cas. Leurs caracteristiques sont donnees dans le
3599 fichier de donnees des buses (voir la documentation ecrite)""",
3600 ang = """Number of culverts, tubes or bridges treated as source terms.
3601 They must be described as sources in the domain and their features
3602 are given in the culverts data file (see written documentation)""",
3604 # -----------------------------------
3605 b_NUMBER_OF_CULVERTSG = BLOC(condition="NUMBER_OF_CULVERTS != 0",
3606 # -----------------------------------
3607 # -----------------------------------
3608 CULVERTS_DATA_FILE = SIMP(statut ='o',
3609 # -----------------------------------
3610 typ = ('Fichier','All Files (*)'),
3612 fr = """Fichier de description des buses/ponts presents dans le modele""",
3613 ang = """Description of culverts/tubes/bridges existing in the model""",
3616 # -----------------------------------
3617 OPTION_FOR_CULVERTS = SIMP(statut ='f',
3618 # -----------------------------------
3621 fr = """Option pour le traitement des buses. Il existe deux formulations
3623 ang = """Option for the treatment of culverts. There are two options in
3627 # -----------------------------------
3628 BREACHES = FACT(statut='f',
3629 # -----------------------------------
3630 # -----------------------------------
3631 BREACH = SIMP(statut ='o',
3632 # -----------------------------------
3635 fr = """Prise en compte de breches dans le calcul par
3636 modification altimetrique dans le maillage. La description
3637 des breches se fait avec le fichier de donnees des breches.""",
3638 ang = """Take in account some breaches during the computation
3639 by modifying the bottom level of the mesh. Brech description
3640 is done with the breaches data file.""",
3642 # -----------------------------------
3643 b_BREACHG = BLOC(condition="BREACH == True",
3644 # -----------------------------------
3645 # -----------------------------------
3646 BREACHES_DATA_FILE = SIMP(statut ='o',
3647 # -----------------------------------
3648 typ = ('Fichier','All Files (*)'),
3650 fr = """Fichier de description des breches""",
3651 ang = """Description of breaches""",
3656 # -----------------------------------------------------------------------
3657 TIDES = PROC(nom= "TIDES",op = None,
3658 # -----------------------------------------------------------------------
3659 # -----------------------------------
3660 BOUNDARY_CONDITIONS = FACT(statut='o',
3661 # -----------------------------------
3662 # -----------------------------------
3663 TIDAL_DATA_BASE = SIMP(statut ='o',
3664 # -----------------------------------
3666 into = ["NO DEFAULT VALUE","JMJ","TPXO","MISCELLANEOUS (LEGOS-NEA, FES20XX, PREVIMER...)"],
3667 defaut = "NO DEFAULT VALUE",
3668 fr = """Pour JMJ, renseigner la localisation du fichier bdd\_jmj et geofin
3669 dans les mots-cles BASE DE DONNEES DE MAREE et FICHIER DU MODELE DE
3670 MAREE. Pour TPXO, LEGOS-NEA, FES20XX et PREVIMER, l''utilisateur doit
3671 telecharger les fichiers de constantes harmoniques sur internet""",
3672 ang = """For JMJ, indicate the location of the files bdd\_jmj and geofin with
3673 keywords TIDE DATA BASE and TIDAL MODEL FILE. For TPXO, LEGOS-NEA,
3674 FES20XX and PREVIMER, the user has to download files of harmonic
3675 constituents on the internet""",
3677 # -----------------------------------
3678 b_TIDAL_DATA_BASEG = BLOC(condition="TIDAL_DATA_BASE == 'TPXO'",
3679 # -----------------------------------
3680 # -----------------------------------
3681 MINOR_CONSTITUENTS_INFERENCE = SIMP(statut ='f',
3682 # -----------------------------------
3685 fr = """Pour la base de donnees TPXO uniquement.
3686 Interpolation de composantes harmoniques mineures
3687 a partir de celles lues dans les fichiers d''entree
3688 lies aux mots-cles BASE BINAIRE 1 DE DONNEES DE MAREE
3689 et BASE BINAIRE 2 DE DONNEES DE MAREE""",
3690 ang = """For TPXO tidal data base only.
3691 Inference of minor constituents from the one read in input files
3692 linked to keywords BINARY DATABASE 1 FOR TIDE
3693 and BINARY DATABASE 2 FOR TIDE""",
3695 # -----------------------------------
3696 BINARY_DATABASE_1_FOR_TIDE = SIMP(statut ='f',
3697 # -----------------------------------
3698 typ = ('Fichier','All Files (*)'),
3700 fr = """Base de donnees binaire 1 tiree du fichier du modele de maree.
3701 Dans le cas des donnees satellitaires de TPXO, ce fichier correspond
3702 aux donnees de niveau d''eau, par exemple h\_tpxo7.2""",
3703 ang = """Binary database 1 extracted from the tidal model file.
3704 In the case of the TPXO satellite altimetry model, this file should
3705 be for free surface level, for instance h\_tpxo7.2""",
3707 # -----------------------------------
3708 BINARY_DATABASE_2_FOR_TIDE = SIMP(statut ='f',
3709 # -----------------------------------
3710 typ = ('Fichier','All Files (*)'),
3712 fr = """Base de donnees binaire 2 tiree du fichier du modele de maree.
3713 Dans le cas des donnees satellitaires de TPXO, ce fichier correspond
3714 aux donnees de vitesse de marrees, par exemple u\_tpxo7.2""",
3715 ang = """Binary database 2 extracted from the tidal model file.
3716 In the case of the TPXO satellite altimetry model, this file should
3717 be for tidal velocities, for instance u\_tpxo7.2""",
3720 # -----------------------------------
3721 TIDAL_MODEL_FILE = SIMP(statut ='f',
3722 # -----------------------------------
3723 typ = ('Fichier','All Files (*)'),
3725 fr = """Fichier de geometrie du modele dont sont extraites
3726 les constantes harmoniques""",
3727 ang = """Geometry file of the model from which harmonic constituents
3730 # -----------------------------------
3731 ASCII_DATABASE_FOR_TIDE = SIMP(statut ='f',
3732 # -----------------------------------
3733 typ = ('Fichier','All Files (*)'),
3735 fr = """Base de donnees de constantes harmoniques
3736 tirees du fichier du modele de maree.
3737 Ancien nom en version 6.1 : BASE DE DONNEES DE MAREE""",
3738 ang = """Tide data base of harmonic constituents
3739 extracted from the tidal model file.
3740 Old name in 6.1 version: TIDE DATA BASE""",
3742 # -----------------------------------
3743 HARMONIC_CONSTANTS_FILE = SIMP(statut ='f',
3744 # -----------------------------------
3745 typ = ('Fichier','All Files (*)'),
3747 fr = """Constantes harmoniques extraites du fichier du modele de maree""",
3748 ang = """Harmonic constants extracted from the tidalmodel file""",
3751 # -----------------------------------
3752 PHYSICAL_PARAMETERS = FACT(statut='o',
3753 # -----------------------------------
3754 # -----------------------------------
3755 TIDE_GENERATING_FORCE = SIMP(statut ='o',
3756 # -----------------------------------
3759 fr = """Active la prise en compte de la force generatrice de la maree""",
3760 ang = """The tide generating force is taken into account.""",
3762 # -----------------------------------
3763 b_TIDE_GENERATING_FORCEG = BLOC(condition="TIDE_GENERATING_FORCE == True",
3764 # -----------------------------------
3766 # -----------------------------------
3767 OPTION_FOR_TIDAL_BOUNDARY_CONDITIONS = SIMP(statut ='o',
3768 # -----------------------------------
3769 typ = 'TXM', max='**',
3770 into = ["No tide","Real tide (recommended methodology)","Astronomical tide","Mean spring tide","Mean tide","Mean neap tide","Astronomical neap tide","Real tide (methodology before 2010)"],
3771 fr = """Option pour les conditions aux limites de maree. Pour des marees
3772 reelles, l option 1 est recommandee. Depuis la version 7.1, ce mot-cle
3773 est un tableau avec une valeur donnee par frontiere liquide, separee par
3774 point-virgules. Ceci permet d''avoir des conditions de maree (ou pas)
3775 calculees sur des frontieres liquides avec vitesses ou hauteur d eau
3776 imposees. Ca evite un conflit lors de l utilisation de seuils dans le
3777 domaine. 0 est le code pour des conditions autres que des conditions de
3778 maree. ATTENTION depuis la version 7.1 ! Les anciens modeles doivent
3779 etre changes si la frontiere de maree n a pas le numero 1. Dans ce cas,
3780 le mot-cle doit etre change et plus de valeurs doivent etre donnees.
3781 Calage possible par les mots-cles COEFFICIENT POUR CALAGE EN MARNAGE et
3782 COEFFICIENT POUR CALAGE EN NIVEAU.""",
3783 ang = """Option for tidal boundary conditions. For real tides, option 1 is
3784 recommended. This keyword has been an array with a value given per
3785 liquid boundary, separated by semicolons, since version 7.1. This
3786 enables to have tidal conditions (or not) computed on liquid boundaries
3787 with prescribed velocities or depths, avoiding a clash when using weirs
3788 in the domain. 0 codes for conditions other than tidal. BEWARE since
3789 version 7.1! Old models must be changed if their tidal boundary is not
3790 number 1. In that case this keyword must be changed and more values
3791 given. Possible calibration with the keywords COEFFICIENT TO ADJUST
3792 TIDAL RANGE, COEFFICENT TO CALIBRATE TIDAL VELOCITIES, and COEFFICIENT
3793 TO ADJUST SEA LEVEL.""",
3796 # -----------------------------------
3797 CALIBRATION = FACT(statut='o',
3798 # -----------------------------------
3799 # -----------------------------------
3800 GEOGRAPHIC_SYSTEM = SIMP(statut ='o',
3801 # -----------------------------------
3803 into = ["NO DEFAULT VALUE","DEFINED BY USER","WGS84 LONGITUDE/LATITUDE IN REAL DEGREES","WGS84 NORTHERN UTM","WGS84 SOUTHERN UTM","LAMBERT","MERCATOR FOR TELEMAC"],
3804 defaut = "NO DEFAULT VALUE",
3805 fr = """Systeme de coordonnees geographiques dans lequel est construit le
3806 modele numerique. Indiquer la zone correspondante avec le mot-cle""",
3807 ang = """Geographic coordinates system in which the numerical model is built.
3808 Indicate the corresponding zone with the keyword""",
3810 # -----------------------------------
3811 b_GEOGRAPHIC_SYSTEMG = BLOC(condition="GEOGRAPHIC_SYSTEM in ['WGS84 NOTHERN UTM','WGS84 SOUTHERN UTM','LAMBERT']",
3812 # -----------------------------------
3813 # -----------------------------------
3814 ZONE_NUMBER_IN_GEOGRAPHIC_SYSTEM = SIMP(statut ='f',
3815 # -----------------------------------
3817 into = ["NO DEFAULT VALUE","LAMBERT 1 NORTH","LAMBERT 2 CENTER","LAMBERT 3 SOUTH","LAMBERT 4 CORSICA","LAMBERT 2 EXTENDED","UTM ZONE, E.G."],
3818 defaut = "NO DEFAULT VALUE",
3819 fr = """Numero de zone (fuseau ou type de projection) lors de l''utilisation
3820 d''une projection plane. Indiquer le systeme geographique dans lequel
3821 est construit le modele numerique avec le mot-cle SYSTEME GEOGRAPHIQUE""",
3822 ang = """Number of zone when using a plane projection. Indicate the geographic
3823 system in which the numerical model is built with the keyword GEOGRAPHIC
3827 # -----------------------------------
3828 COEFFICIENT_TO_CALIBRATE_SEA_LEVEL = SIMP(statut ='o',
3829 # -----------------------------------
3832 fr = """Coefficient pour ajuster le niveau de mer""",
3833 ang = """Coefficient to calibrate the sea level""",
3835 # -----------------------------------
3836 COEFFICIENT_TO_CALIBRATE_TIDAL_RANGE = SIMP(statut ='o',
3837 # -----------------------------------
3840 fr = """Coefficient pour ajuster le marnage de l''onde de maree
3841 aux frontieres maritimes""",
3842 ang = """Coefficient to calibrate the tidal range of tidal wave
3843 at tidal open boundary conditions""",
3845 # -----------------------------------
3846 COEFFICIENT_TO_CALIBRATE_TIDAL_VELOCITIES = SIMP(statut ='o',
3847 # -----------------------------------
3850 fr = """Coefficient pour ajuster les composantes de vitesse
3851 de l''onde de maree aux frontieres maritimes.
3852 La valeur par defaut 999999. signifie que c''est la racine carree
3853 du COEFFICIENT DE CALAGE DU MARNAGE qui est prise""",
3854 ang = """Coefficient to calibrate the tidal velocities of tidal wave
3855 at tidal open boundary conditions.
3856 Default value 999999. means that the square root of
3857 COEFFICIENT TO CALIBRATE TIDAL RANGE is taken""",
3859 # -----------------------------------
3860 LOCAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER = SIMP(statut ='f',
3861 # -----------------------------------
3864 fr = """Numero local du point entre 1 et le nombre de points de frontiere
3865 maritime (du FICHIER DES CONSTANTES HARMONIQUES) ou les conditions aux
3866 limites de maree sont calculees avec les bases de donnees JMJ, NEA, FES,
3867 PREVIMER (sauf les bases de type TPXO). Les ondes de maree sont
3868 dephasees par rapport a ce point pour debuter le calcul par une pleine
3869 mer (en marees schematiques seulement).""",
3870 ang = """Local number between 1 and the number of tidal boundary points (of the
3871 HARMONIC CONSTANTS FILE) where the tidal boundary conditions are
3872 computed with JMJ, NEA, FES, PREVIMER databases (except TPXO-type
3873 databases). The tidal constituents have their phase shifted with respect
3874 to this point to start the simulation with a high water (for schematic
3877 # -----------------------------------
3878 GLOBAL_NUMBER_OF_THE_POINT_TO_CALIBRATE_HIGH_WATER = SIMP(statut ='f',
3879 # -----------------------------------
3882 fr = """Numero global du point par rapport auquel les ondes de maree sont
3883 dephasees pour debuter le calcul par une pleine mer (en marees
3884 schematiques seulement). Ne concerne que les bases de constantes
3885 harmoniques de type TPXO.""",
3886 ang = """Global number of the point with respect to which the tidal
3887 constituents have their phase shifted to start the calculation with a
3888 high water (for schematic tides only). Only harmonic constants databases
3889 like TPXO are concerned.""",
3893 # -----------------------------------------------------------------------
3894 COUPLING = PROC(nom= "COUPLING",op = None,
3895 # -----------------------------------------------------------------------
3896 # -----------------------------------
3897 COUPLING_WITH = SIMP(statut ='o',
3898 # -----------------------------------
3900 into = ['SISYPHE','TOMAWAC','DELWAQ'],
3902 fr = """Liste des codes avec lesquels on couple Telemac-2D
3903 SISYPHE : couplage interne avec Sisyphe
3904 TOMAWAC : couplage interne avec Tomawac
3905 DELWAQ : sortie de fichiers de resultats pour Delwaq""",
3906 ang = """List of codes to be coupled with Telemac-2D
3907 SISYPHE : internal coupling with Sisyphe
3908 TOMAWAC : internal coupling with Tomawac
3909 DELWAQ: will yield results file for Delwaq""",
3911 # -----------------------------------
3912 NAMES_OF_CLANDESTINE_VARIABLES = SIMP(statut ='f',
3913 # -----------------------------------
3914 typ = 'TXM', min= 2, max= 2,
3915 fr = """Noms de variables qui ne sont pas utilisees par TELEMAC;
3916 mais qui doivent etre conservees lors de son execution.
3917 Ceci peut etre utilise entre autres lors du couplage de TELEMAC
3919 Les variables clandestines sont alors des variables propres a l''autre
3920 code et sont rendues dans le fichier de resultats.""",
3921 ang = """Names of variables that are not used by TELEMAC, but should be
3922 preserved when it is being run. This keyword may be used, for instance
3923 when it if TELEMAC is coupled with another code. Thus, the clandestine
3924 variables belong to the other code and are given back in the results
3927 # -----------------------------------
3928 DELWAQ = FACT(statut='o',
3929 # -----------------------------------
3930 # -----------------------------------
3931 COUPLING_DIRECTORY = SIMP(statut ='f',
3932 # -----------------------------------
3935 fr = """Nom complet du dossier d echange des fichiers
3936 pour couplage de codes""",
3937 ang = """Name with full path of the directory where the files will
3938 be exchanged for coupling""",
3940 # -----------------------------------
3941 DELWAQ_PRINTOUT_PERIOD = SIMP(statut ='f',
3942 # -----------------------------------
3945 fr = """Periode de sortie des resultats pour Delwaq""",
3946 ang = """Printout period for Delwaq file""",
3948 # -----------------------------------
3949 VOLUMES_DELWAQ_FILE = SIMP(statut ='f',
3950 # -----------------------------------
3951 typ = ('Fichier','All Files (*)','Sauvegarde'),
3953 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3954 ang = """Results file for coupling with Delwaq""",
3956 # -----------------------------------
3957 EXCHANGE_AREAS_DELWAQ_FILE = SIMP(statut ='f',
3958 # -----------------------------------
3959 typ = ('Fichier','All Files (*)','Sauvegarde'),
3961 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3962 ang = """Results file for coupling with Delwaq""",
3964 # -----------------------------------
3965 VERTICAL_FLUXES_DELWAQ_FILE = SIMP(statut ='f',
3966 # -----------------------------------
3967 typ = ('Fichier','All Files (*)','Sauvegarde'),
3969 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3970 ang = """Results file for coupling with Delwaq""",
3972 # -----------------------------------
3973 SALINITY_DELWAQ_FILE = SIMP(statut ='f',
3974 # -----------------------------------
3975 typ = ('Fichier','All Files (*)','Sauvegarde'),
3977 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3978 ang = """Results file for coupling with Delwaq""",
3980 # -----------------------------------
3981 BOTTOM_SURFACES_DELWAQ_FILE = SIMP(statut ='f',
3982 # -----------------------------------
3983 typ = ('Fichier','All Files (*)','Sauvegarde'),
3985 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3986 ang = """Results file for coupling with Delwaq""",
3988 # -----------------------------------
3989 EXCHANGES_BETWEEN_NODES_DELWAQ_FILE = SIMP(statut ='f',
3990 # -----------------------------------
3991 typ = ('Fichier','All Files (*)','Sauvegarde'),
3993 fr = """Fichier de resultats pour le couplage avec Delwaq""",
3994 ang = """Results file for coupling with Delwaq""",
3996 # -----------------------------------
3997 NODES_DISTANCES_DELWAQ_FILE = SIMP(statut ='f',
3998 # -----------------------------------
3999 typ = ('Fichier','All Files (*)','Sauvegarde'),
4001 fr = """Fichier de resultats pour le couplage avec Delwaq""",
4002 ang = """Results file for coupling with Delwaq""",
4004 # -----------------------------------
4005 TEMPERATURE_DELWAQ_FILE = SIMP(statut ='f',
4006 # -----------------------------------
4007 typ = ('Fichier','All Files (*)','Sauvegarde'),
4009 fr = """Fichier de resultats pour le couplage avec Delwaq""",
4010 ang = """Results file for coupling with Delwaq""",
4012 # -----------------------------------
4013 VELOCITY_DELWAQ_FILE = SIMP(statut ='f',
4014 # -----------------------------------
4015 typ = ('Fichier','All Files (*)','Sauvegarde'),
4017 fr = """Fichier de resultats pour le couplage avec Delwaq""",
4018 ang = """Results file for coupling with Delwaq""",
4020 # -----------------------------------
4021 DIFFUSIVITY_DELWAQ_FILE = SIMP(statut ='f',
4022 # -----------------------------------
4023 typ = ('Fichier','All Files (*)','Sauvegarde'),
4025 fr = """Fichier de resultats pour le couplage avec Delwaq""",
4026 ang = """Results file for coupling with Delwaq""",
4028 # -----------------------------------
4029 DELWAQ_STEERING_FILE = SIMP(statut ='f',
4030 # -----------------------------------
4031 typ = ('Fichier','All Files (*)','Sauvegarde'),
4033 fr = """Fichier de resultats pour le couplage avec Delwaq""",
4034 ang = """Results file for coupling with Delwaq""",
4036 # -----------------------------------
4037 SALINITY_FOR_DELWAQ = SIMP(statut ='f',
4038 # -----------------------------------
4041 fr = """Decide de la sortie de la salinite pour Delwaq""",
4042 ang = """Triggers output of salinity for Delwaq""",
4044 # -----------------------------------
4045 TEMPERATURE_FOR_DELWAQ = SIMP(statut ='f',
4046 # -----------------------------------
4049 fr = """Decide de la sortie de la temperature pour Delwaq""",
4050 ang = """Triggers output of temperature for Delwaq""",
4052 # -----------------------------------
4053 VELOCITY_FOR_DELWAQ = SIMP(statut ='f',
4054 # -----------------------------------
4057 fr = """Decide de la sortie de la vitesse pour Delwaq""",
4058 ang = """Triggers output of velocity for Delwaq""",
4060 # -----------------------------------
4061 DIFFUSIVITY_FOR_DELWAQ = SIMP(statut ='f',
4062 # -----------------------------------
4065 fr = """Decide de la sortie du coefficient de diffusion pour Delwaq""",
4066 ang = """Triggers output of diffusion for Delwaq""",
4069 # -----------------------------------
4070 SISYPHE = FACT(statut='o',
4071 # -----------------------------------
4072 # -----------------------------------
4073 SISYPHE_STEERING_FILE = SIMP(statut ='f',
4074 # -----------------------------------
4077 fr = """Fichier des parametres de Sisyphe en cas de couplage interne""",
4078 ang = """Sisyphe parameter file in case of internal coupling""",
4080 # -----------------------------------
4081 COUPLING_PERIOD_FOR_SISYPHE = SIMP(statut ='f',
4082 # -----------------------------------
4085 fr = """pour eviter de faire le couplage a chaque pas de temps""",
4086 ang = """to avoid coupling at every time-step""",
4089 # -----------------------------------
4090 TOMAWAC = FACT(statut='o',
4091 # -----------------------------------
4092 # -----------------------------------
4093 TOMAWAC_STEERING_FILE = SIMP(statut ='f',
4094 # -----------------------------------
4097 fr = """Fichier des parametres de Tomawac en cas de couplage interne""",
4098 ang = """Tomawac parameter file in case of internal coupling""",
4100 # -----------------------------------
4101 COUPLING_PERIOD_FOR_TOMAWAC = SIMP(statut ='f',
4102 # -----------------------------------
4105 fr = """pour eviter de faire le couplage a chaque pas de temps""",
4106 ang = """to avoid coupling at every time-step""",
4109 # -----------------------------------
4110 WAQTEL = FACT(statut='o',
4111 # -----------------------------------
4112 # -----------------------------------
4113 WAQTEL_STEERING_FILE = SIMP(statut ='f',
4114 # -----------------------------------
4117 fr = """fichier des parametres physiques pour les processus de qualite d eau
4118 (internes non ceux de DELWAQ)""",
4119 ang = """file for physical parameters of waq processes (local ones of
4120 Telemac-tracer not those of DELWAQ)""",
4124 # -----------------------------------------------------------------------
4125 INTERNAL = PROC(nom= "INTERNAL",op = None,
4126 # -----------------------------------------------------------------------
4127 # -----------------------------------
4128 LANGUAGE = SIMP(statut ='f',
4129 # -----------------------------------
4131 into = ["FRANCAIS","ANGLAIS"],
4133 fr = """1 : FRANCAIS 2 : ANGLAIS""",
4134 ang = """1: FRENCH 2: ENGLISH""",
4136 # -----------------------------------
4137 STEERING_FILE = SIMP(statut ='f',
4138 # -----------------------------------
4139 typ = ('Fichier','All Files (*)'),
4141 fr = """Nom du fichier contenant les parametres du calcul a realiser.""",
4142 ang = """Name of the file containing the parameters of the computation
4143 Written by the user.""",
4145 # -----------------------------------
4146 DICTIONARY = SIMP(statut ='f',
4147 # -----------------------------------
4148 typ = ('Fichier','All Files (*)'),
4149 defaut = 'telemac2d.dico',
4150 fr = """Dictionnaire des mots cles.""",
4151 ang = """Key word dictionary.""",
4153 # -----------------------------------
4154 PARTITIONING_TOOL = SIMP(statut ='f',
4155 # -----------------------------------
4157 into = ['METIS','SCOTCH','PARMETIS','PTSCOTCH'],
4159 fr = """CHOIX DU PARTITIONNEUR
4165 ang = """PARTITIONING TOOL SELECTION
4172 # -----------------------------------
4173 RELEASE = SIMP(statut ='f',
4174 # -----------------------------------
4177 fr = """Numero de version des bibliotheques utilisees par TELEMAC.
4178 SUR UNE STATION DE TRAVAIL
4179 5 versions sont donnees correspondant a :
4180 TELEMAC,DAMO,UTILE,BIEF,HP""",
4181 ang = """version number of the libraries used by TELEMAC.
4183 5 numbers are given, corresponding to the libraries called:
4184 TELEMAC,DAMO,UTILE,BIEF,HP""",
4186 # -----------------------------------
4187 LIST_OF_FILES = SIMP(statut ='f',
4188 # -----------------------------------
4189 typ = 'TXM', min=47, max=47,
4190 defaut = 'STEERING FILE;DICTIONARY;FORTRAN FILE;GEOMETRY FILE;BOUNDARY CONDITIONS FILE;RESULTS FILE;PREVIOUS COMPUTATION FILE;BOTTOM TOPOGRAPHY FILE;BINARY DATA FILE 1;BINARY DATA FILE 2;FORMATTED DATA FILE 1;FORMATTED DATA FILE 2;BINARY RESULTS FILE;FORMATTED RESULTS FILE;REFERENCE FILE;LIQUID BOUNDARIES FILE;FRICTION DATA FILE;VOLUMES DELWAQ FILE;EXCHANGE AREAS DELWAQ FILE;VERTICAL FLUXES DELWAQ FILE;SALINITY DELWAQ FILE;VELOCITY DELWAQ FILE;DIFFUSIVITY DELWAQ FILE;BOTTOM SURFACES DELWAQ FILE;EXCHANGES BETWEEN NODES DELWAQ FILE;NODES DISTANCES DELWAQ FILE;TEMPERATURE DELWAQ FILE;DELWAQ STEERING FILE;STAGE-DISCHARGE CURVES FILE;SOURCES FILE;SECTIONS INPUT FILE;SECTIONS OUTPUT FILE;OIL SPILL STEERING FILE;HARMONIC CONSTANTS FILE;TIDAL MODEL FILE;ASCII DATABASE FOR TIDE;BINARY DATABASE 1 FOR TIDE;BINARY DATABASE 2 FOR TIDE;WEIRS DATA FILE;SIPHONS DATA FILE;CULVERTS DATA FILE;BREACHES DATA FILE;DROGUES FILE;ZONES FILE;FLUXLINE INPUT FILE;ASCII ATMOSPHERIC DATA FILE;BINARY ATMOSPHERIC DATA FILE',
4191 fr = """Noms des fichiers exploites par le code""",
4192 ang = """File names of the used files""",
4194 # -----------------------------------
4195 DESCRIPTION_OF_LIBRARIES = SIMP(statut ='f',
4196 # -----------------------------------
4197 typ = 'TXM', min=11, max=11,
4198 defaut = 'builds|PPP|lib|telemac2dMMMVVV.LLL;builds|PPP|lib|sisypheMMMVVV.LLL;builds|PPP|lib|tomawacMMMVVV.LLL;builds|PPP|lib|nestorMMMVVV.LLL;builds|PPP|lib|waqtelMMMVVV.LLL;builds|PPP|lib|stbtelMMMVVV.LLL;builds|PPP|lib|biefMMMVVV.LLL;builds|PPP|lib|hermesMMMVVV.LLL;builds|PPP|lib|damoMMMVVV.LLL;builds|PPP|lib|parallelMMMVVV.LLL;builds|PPP|lib|specialMMMVVV.LLL',
4199 fr = """Description des librairies de T2D""",
4200 ang = """LIBRARIES description""",
4202 # -----------------------------------
4203 DEFAULT_EXECUTABLE = SIMP(statut ='f',
4204 # -----------------------------------
4206 defaut = 'builds|PPP|bin|telemac2dMMMVVV.exe',
4207 fr = """Executable par defaut de T2D""",
4208 ang = """Default executable for T2D""",
4210 # -----------------------------------
4211 DEFAULT_PARALLEL_EXECUTABLE = SIMP(statut ='f',
4212 # -----------------------------------
4214 defaut = 'builds|PPP|bin|telemac2dMMMVVV.exe',
4215 fr = """Executable parallele par defaut de T2D""",
4216 ang = """Default parallel executable for T2D""",
4219 Ordre_Des_Commandes = (
4220 'COMPUTATION_ENVIRONMENT',
4222 'GENERAL_PARAMETERS',
4223 'NUMERICAL_PARAMETERS',
4227 'PARTICLE_TRANSPORT',
4228 'HYDRAULIC_STRUCTURES',
4232 Classement_Commandes_Ds_Arbre = (
4233 'COMPUTATION_ENVIRONMENT',
4235 'GENERAL_PARAMETERS',
4236 'NUMERICAL_PARAMETERS',
4240 'PARTICLE_TRANSPORT',
4241 'HYDRAULIC_STRUCTURES',