SalomeHEXABLOCKConfig.cmake.in

   1 # - Config file for the @PROJECT_NAME@ package
   2 # It defines the following variables.
   3 # Specific to the pacakge @PROJECT_NAME@ itself:
   4 #  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
   5 #
   6
   7 ###############################################################
   8 #  Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
   9 #
  10 #  Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
  11 #  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
  12 #
  13 #  This library is free software; you can redistribute it and/or
  14 #  modify it under the terms of the GNU Lesser General Public
  15 #  License as published by the Free Software Foundation; either
  16 #  version 2.1 of the License.
  17 #
  18 #  This library is distributed in the hope that it will be useful,
  19 #  but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  21 #  Lesser General Public License for more details.
  22 #
  23 #  You should have received a copy of the GNU Lesser General Public
  24 #  License along with this library; if not, write to the Free Software
  25 #  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  26 #
  27 #  See http://www.salome-platform.org/ or
  28 #  email : webmaster.salome@opencascade.com
  29 ###############################################################
  30
  31 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  32 @PACKAGE_INIT@
  33
  34 # Load the dependencies for the libraries of @PROJECT_NAME@
  35 # (contains definitions for IMPORTED targets). This is only
  36 # imported if we are not built as a subproject (in this case targets are already there)
  37 IF(NOT TARGET HEXABLOCKEngine AND NOT @PROJECT_NAME@_BINARY_DIR)
  38   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
  39 ENDIF()
  40
  41 # Package root dir:
  42 SET_AND_CHECK(HEXABLOCK_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  43
  44 # Include directories
  45 SET_AND_CHECK(HEXABLOCK_INCLUDE_DIRS "${HEXABLOCK_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  46 SET(HEXABLOCK_INCLUDE_DIRS "${HEXABLOCK_INCLUDE_DIRS};@_SalomeHEXABLOCK_EXTRA_HEADERS@")
  47 SET(HEXABLOCK_DEFINITIONS "@GEOM_DEFINITIONS@")
  48
  49 # Package specific environment variables
  50 @_SalomeHEXABLOCK_EXTRA_ENV_FULL@
  51
  52 #### Now the specificities
  53
  54 # Options exported by the package:
  55 SET(SALOME_HEXABLOCK_BUILD_TESTS @SALOME_BUILD_TESTS@)
  56 SET(SALOME_HEXABLOCK_BUILD_DOC   @SALOME_BUILD_DOC@)
  57
  58 # Advanced options
  59 SET(SALOME_HEXABLOCK_BUILD_GUI   @SALOME_BUILD_GUI@)
  60
  61 # Level 1 prerequisites:
  62 SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_GEOM_ROOT_DIR@")
  63
  64 # For all prerequisites, load the corresponding targets if the package was used
  65 # in CONFIG mode. This ensures dependent projects link correctly
  66 # without having to set LD_LIBRARY_PATH:
  67 SET(_PREREQ @_PREREQ_LIST@)
  68 SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
  69 SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
  70 LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
  71 IF(NOT _list_len EQUAL 0)
  72   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
  73   MATH(EXPR _range "${_list_len}-1")
  74   FOREACH(_p RANGE ${_range})
  75     LIST(GET _PREREQ            ${_p} _pkg    )
  76     LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
  77     LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
  78     MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
  79     IF(NOT _pkg_compo)
  80       FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
  81           PATHS "${_pkg_dir}"
  82           NO_DEFAULT_PATH)
  83     ELSE()
  84       STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
  85       MESSAGE(STATUS "===> (components: ${_pkg_compo})")
  86       FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
  87           COMPONENTS ${_compo_lst}
  88           PATHS "${_pkg_dir}"
  89           NO_DEFAULT_PATH)
  90     ENDIF()
  91   ENDFOREACH()
  92 ENDIF()
  93
  94 # Installation directories
  95 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
  96 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
  97 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
  98 SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
  99 SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
 100 SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
 101 SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
 102 SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
 103 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
 104 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
 105 SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
 106 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 107 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 108 SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
 109
 110 # Include GEOM targets if they were not already loaded:
 111 IF(NOT (TARGET GEOMbasic))
 112   INCLUDE("${GEOM_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeGEOMTargets.cmake")
 113 ENDIF()
 114
 115 # Exposed HEXABLOCK targets:
 116 SET(HEXABLOCK_HEXABLOCKEngine HEXABLOCKEngine)
 117 SET(HEXABLOCK_HEXABLOCK HEXABLOCK)
 118 SET(HEXABLOCK__hexablock_swig _hexablock_swig)
 119 SET(HEXABLOCK_MyDlgRef MyDlgRef)