SalomeCALCULATORConfig.cmake.in

   1 # Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
   2 #
   3 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   4 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
   5 #
   6 # This library is free software; you can redistribute it and/or
   7 # modify it under the terms of the GNU Lesser General Public
   8 # License as published by the Free Software Foundation; either
   9 # version 2.1 of the License, or (at your option) any later version.
  10 #
  11 # This library is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14 # Lesser General Public License for more details.
  15 #
  16 # You should have received a copy of the GNU Lesser General Public
  17 # License along with this library; if not, write to the Free Software
  18 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  19 #
  20 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  21 #
  22
  23 # - Config file for the @PROJECT_NAME@ package
  24 # It defines the following variables.
  25 # Specific to the pacakge @PROJECT_NAME@ itself:
  26 #  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
  27 #
  28
  29 ### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
  30 @PACKAGE_INIT@
  31
  32 # Load the dependencies for the libraries of @PROJECT_NAME@
  33 # (contains definitions for IMPORTED targets). This is only
  34 # imported if we are not built as a subproject (in this case targets are already there)
  35 IF(NOT TARGET CALCULATOREngine AND NOT @PROJECT_NAME@_BINARY_DIR)
  36   INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
  37 ENDIF()
  38
  39 # Package root dir:
  40 SET_AND_CHECK(CALCULATOR_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
  41
  42 # Include directories
  43 SET_AND_CHECK(CALCULATOR_INCLUDE_DIRS "${CALCULATOR_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
  44 SET(CALCULATOR_INCLUDE_DIRS "${CALCULATOR_INCLUDE_DIRS};@_SalomeCALCULATOR_EXTRA_HEADERS@")
  45 SET(CALCULATOR_DEFINITIONS "@MED_DEFINITIONS@")
  46
  47 # Package specific environment variables
  48 @_SalomeCALCULATOR_EXTRA_ENV_FULL@
  49
  50 #### Now the specificities
  51
  52 # Options exported by the package:
  53 SET(SALOME_CALCULATOR_BUILD_TESTS @SALOME_BUILD_TESTS@)
  54 SET(SALOME_CALCULATOR_BUILD_DOC   @SALOME_BUILD_DOC@)
  55
  56 # Level 1 prerequisites:
  57 SET_AND_CHECK(MED_ROOT_DIR_EXP  "@PACKAGE_MED_ROOT_DIR@")
  58
  59 # For all prerequisites, load the corresponding targets if the package was used
  60 # in CONFIG mode. This ensures dependent projects link correctly
  61 # without having to set LD_LIBRARY_PATH:
  62 SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
  63 SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
  64 SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
  65 LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
  66 IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
  67   # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
  68   MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
  69   FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
  70     LIST(GET _PREREQ_@PROJECT_NAME@            ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@    )
  71     LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
  72     LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
  73     IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
  74       MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
  75       IF(NOT _pkg_compo_@PROJECT_NAME@)
  76         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
  77             PATHS "${_pkg_dir_@PROJECT_NAME@}"
  78             NO_DEFAULT_PATH)
  79       ELSE()
  80         STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
  81         MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
  82         FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
  83             COMPONENTS ${_compo_lst_@PROJECT_NAME@}
  84             PATHS "${_pkg_dir_@PROJECT_NAME@}"
  85             NO_DEFAULT_PATH)
  86       ENDIF()
  87     ENDIF()
  88   ENDFOREACH()
  89 ENDIF()
  90
  91 # Installation directories
  92 SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
  93 SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
  94 SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
  95 SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
  96 SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
  97 SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
  98 SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
  99 SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
 100 SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
 101 SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
 102 SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
 103 SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
 104 SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
 105 SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
 106 SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
 107
 108 # Include MED targets if they were not already loaded:
 109 IF(NOT (TARGET medcalculator))
 110   INCLUDE("${MED_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeMEDTargets.cmake")
 111 ENDIF()
 112
 113 # Exposed CALCULATOR targets:
 114 SET(CALCULATOR_CALCULATOREngine CALCULATOREngine)
 115 SET(CALCULATOR_SalomeIDLCALCULATOR SalomeIDLCALCULATOR)