--- /dev/null
+# -*- coding: iso-8859-1 -*-
+# Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
+#
+# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# =======================================
+#
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New()
+
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New()
+
+# Geometry
+# ========
+
+# A twice holed cube build by points, edges, faces and solids
+
+# Values
+# ------
+
+ox = 0
+oy = 0
+oz = 0
+
+longueur = 200
+largeur = 100
+hauteur = 80
+
+cylindre = 50
+
+rayon = 20
+
+# Points
+# ------
+
+piecePoint1 = geompy.MakeVertex(ox , oy, oz)
+piecePoint2 = geompy.MakeVertex(ox+longueur, oy, oz)
+piecePoint3 = geompy.MakeVertex(ox+longueur, oy, oz+largeur)
+piecePoint4 = geompy.MakeVertex(ox , oy, oz+largeur)
+
+cz = oz+largeur/2
+
+cylPoint1 = geompy.MakeVertex(ox+cylindre , oy, cz-rayon)
+cylPoint2 = geompy.MakeVertex(ox+longueur-cylindre, oy, cz-rayon)
+cylPoint3 = geompy.MakeVertex(ox+longueur-cylindre, oy, cz+rayon)
+cylPoint4 = geompy.MakeVertex(ox+cylindre , oy, cz+rayon)
+
+# Edges
+# -----
+
+pieceEdge1 = geompy.MakeEdge(piecePoint1, piecePoint4)
+pieceEdge2 = geompy.MakeEdge(piecePoint1, cylPoint1)
+pieceEdge3 = geompy.MakeEdge(piecePoint4, cylPoint4)
+
+pieceEdge4 = geompy.MakeEdge(piecePoint2, piecePoint3)
+pieceEdge5 = geompy.MakeEdge(piecePoint2, cylPoint2)
+pieceEdge6 = geompy.MakeEdge(piecePoint3, cylPoint3)
+
+pieceEdge7 = geompy.MakeEdge(cylPoint1, cylPoint2)
+pieceEdge8 = geompy.MakeEdge(cylPoint3, cylPoint4)
+
+cylEdge1 = geompy.MakeArc(cylPoint1, geompy.MakeVertex(ox+cylindre-rayon , oy, cz), cylPoint4)
+cylEdge2 = geompy.MakeArc(cylPoint1, geompy.MakeVertex(ox+cylindre+rayon , oy, cz), cylPoint4)
+cylEdge3 = geompy.MakeArc(cylPoint2, geompy.MakeVertex(ox+longueur-cylindre-rayon, oy, cz), cylPoint3)
+cylEdge4 = geompy.MakeArc(cylPoint2, geompy.MakeVertex(ox+longueur-cylindre+rayon, oy, cz), cylPoint3)
+
+# Faces
+# -----
+
+pieceFace1 = geompy.MakeQuad4Vertices(piecePoint1, piecePoint2, cylPoint2 , cylPoint1 )
+pieceFace2 = geompy.MakeQuad (pieceEdge1 , pieceEdge2 , cylEdge1 , pieceEdge3)
+pieceFace3 = geompy.MakeQuad4Vertices(piecePoint3, piecePoint4, cylPoint4 , cylPoint3 )
+pieceFace4 = geompy.MakeQuad (pieceEdge4 , pieceEdge5 , cylEdge4 , pieceEdge6)
+pieceFace5 = geompy.MakeQuad (pieceEdge7 , cylEdge3 , pieceEdge8, cylEdge2 )
+
+# Solids
+# ------
+
+pieceVector = geompy.MakeVectorDXDYDZ(0, 1, 0)
+
+pieceSolid1 = geompy.MakePrismVecH(pieceFace1, pieceVector, hauteur)
+pieceSolid2 = geompy.MakePrismVecH(pieceFace2, pieceVector, hauteur)
+pieceSolid3 = geompy.MakePrismVecH(pieceFace3, pieceVector, hauteur)
+pieceSolid4 = geompy.MakePrismVecH(pieceFace4, pieceVector, hauteur)
+pieceSolid5 = geompy.MakePrismVecH(pieceFace5, pieceVector, hauteur)
+
+# Compound and glue
+# -----------------
+
+c_cpd = geompy.MakeCompound([pieceSolid1, pieceSolid2, pieceSolid3, pieceSolid4, pieceSolid5])
+
+piece = geompy.MakeGlueFaces(c_cpd, 1.e-5)
+
+# Add in study
+# ------------
+
+piece_id = geompy.addToStudy(piece, "ex08_hole2build")
+
+# Meshing
+# =======
+
+# Create a hexahedral mesh
+# ------------------------
+
+hexa = smesh.Mesh(piece, "ex08_hole2build:hexa")
+
+algo = hexa.Segment()
+algo.NumberOfSegments(7)
+
+hexa.Quadrangle()
+
+hexa.Hexahedron()
+
+# Mesh calculus
+# -------------
+
+hexa.Compute()
+
+# Update object browser
+# ---------------------
+
+salome.sg.updateObjBrowser()
