-# This is an automation of the cylinder-box object, defined with the coordinates of its center, its radius, and the box's
+# This is an automation of the cylinder-box object, defined with the coordinates of its center, its radius, and the box's
# boundary size.
# The pitch ratio is calculated automatically from the minimum of the box dimensions on x and y.
# This functions can take a groups input containing the group names of 4 sides in addition to the internal circular boundary
from MacObject import *
import Config, GenFunctions
-def Cylinder (X0 , Y0 , D , DX , DY , LocalMeshing , **args) :
- if args.__contains__('DLocal') : DLocal = float(args['DLocal'])
- else : DLocal = float(min(DX,DY))
-
- # K is the pitch ratio
- K = float(D)/(DLocal-D)
- print "A local pitch ratio of K =", K ," will be used. "
- NumCuts = 2*GenFunctions.QuarCylParam(K)
- InternalMeshing = int(math.ceil(math.pi*D/(4*NumCuts*LocalMeshing)))
- if InternalMeshing == 0 : InternalMeshing = 1 # This sets a minimum meshing condition in order to avoid an error. The user is notified of the value considered for the local meshing
- print "Possible Local meshing is :", math.pi*D/(4*NumCuts*InternalMeshing), "\nThis value is returned by this function for your convenience.\n"
- if args.__contains__('groups') :
- GroupNames = args['groups']
- else : GroupNames = [None, None, None, None, None]
-
- if DY == DLocal :
- if DX == DLocal:
- GN1 = [None,GroupNames[1],None,GroupNames[3],GroupNames[4]]
- GN2 = [None,GroupNames[1],GroupNames[2],None,GroupNames[4]]
- GN3 = [GroupNames[0],None,GroupNames[2],None,GroupNames[4]]
- GN4 = [GroupNames[0],None,None,GroupNames[3],GroupNames[4]]
- else :
- GN1 = [None,GroupNames[1],None,None,GroupNames[4]]
- GN2 = [None,GroupNames[1],None,None,GroupNames[4]]
- GN3 = [GroupNames[0],None,None,None,GroupNames[4]]
- GN4 = [GroupNames[0],None,None,None,GroupNames[4]]
-
- GN5 = [GroupNames[0],GroupNames[1],None,GroupNames[3]]
- GN6 = [GroupNames[0],GroupNames[1],GroupNames[2],None]
+def Cylinder (X0 , Y0 , D , DX , DY , LocalMeshing , **args) :
+ if args.__contains__('DLocal') : DLocal = float(args['DLocal'])
+ else : DLocal = float(min(DX,DY))
+
+ # K is the pitch ratio
+ K = float(D)/(DLocal-D)
+ print "A local pitch ratio of K =", K ," will be used. "
+ NumCuts = 2*GenFunctions.QuarCylParam(K)
+ InternalMeshing = int(math.ceil(math.pi*D/(4*NumCuts*LocalMeshing)))
+ if InternalMeshing == 0 : InternalMeshing = 1 # This sets a minimum meshing condition in order to avoid an error. The user is notified of the value considered for the local meshing
+ print "Possible Local meshing is :", math.pi*D/(4*NumCuts*InternalMeshing), "\nThis value is returned by this function for your convenience.\n"
+ if args.__contains__('groups') :
+ GroupNames = args['groups']
+ else : GroupNames = [None, None, None, None, None]
+
+ if DY == DLocal :
+ if DX == DLocal:
+ GN1 = [None,GroupNames[1],None,GroupNames[3],GroupNames[4]]
+ GN2 = [None,GroupNames[1],GroupNames[2],None,GroupNames[4]]
+ GN3 = [GroupNames[0],None,GroupNames[2],None,GroupNames[4]]
+ GN4 = [GroupNames[0],None,None,GroupNames[3],GroupNames[4]]
+ else :
+ GN1 = [None,GroupNames[1],None,None,GroupNames[4]]
+ GN2 = [None,GroupNames[1],None,None,GroupNames[4]]
+ GN3 = [GroupNames[0],None,None,None,GroupNames[4]]
+ GN4 = [GroupNames[0],None,None,None,GroupNames[4]]
+
+ GN5 = [GroupNames[0],GroupNames[1],None,GroupNames[3]]
+ GN6 = [GroupNames[0],GroupNames[1],GroupNames[2],None]
+ else :
+ if DX == DLocal:
+ GN1 = [None,None,None,GroupNames[3],GroupNames[4]]
+ GN2 = [None,None,GroupNames[2],None,GroupNames[4]]
+ GN3 = [None,None,GroupNames[2],None,GroupNames[4]]
+ GN4 = [None,None,None,GroupNames[3],GroupNames[4]]
+ GN7 = [GroupNames[0],None,GroupNames[2],GroupNames[3]]
+ GN8 = [None,GroupNames[1],GroupNames[2],GroupNames[3]]
else :
- if DX == DLocal:
- GN1 = [None,None,None,GroupNames[3],GroupNames[4]]
- GN2 = [None,None,GroupNames[2],None,GroupNames[4]]
- GN3 = [None,None,GroupNames[2],None,GroupNames[4]]
- GN4 = [None,None,None,GroupNames[3],GroupNames[4]]
- GN7 = [GroupNames[0],None,GroupNames[2],GroupNames[3]]
- GN8 = [None,GroupNames[1],GroupNames[2],GroupNames[3]]
- else :
- GN1 = [None,None,None,None,GroupNames[4]]
- GN2 = [None,None,None,None,GroupNames[4]]
- GN3 = [None,None,None,None,GroupNames[4]]
- GN4 = [None,None,None,None,GroupNames[4]]
-
- GN5 = [None,None,None,GroupNames[3]]
- GN6 = [None,None,GroupNames[2],None]
-
- GN9 = [GroupNames[0],None,None,GroupNames[3]]
- GN10 = [GroupNames[0],None,None,None]
- GN11 = [GroupNames[0],None,GroupNames[2],None]
-
- GN12 = [None,GroupNames[1],None,GroupNames[3]]
- GN13 = [None,GroupNames[1],None,None]
- GN14 = [None,GroupNames[1],GroupNames[2],None]
-
- Obj = []
-
- Obj.append(MacObject('QuartCyl',[(X0+DLocal/4.,Y0+DLocal/4.),(DLocal/2.,DLocal/2.)],[InternalMeshing,'NE',K], groups = GN1))
- Obj.append(MacObject('QuartCyl',[(X0-DLocal/4.,Y0+DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','NW',K], groups = GN2))
- Obj.append(MacObject('QuartCyl',[(X0-DLocal/4.,Y0-DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','SW',K], groups = GN3))
- Obj.append(MacObject('QuartCyl',[(X0+DLocal/4.,Y0-DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','SE',K], groups = GN4))
-
- if DX > DLocal :
- dX = (DX - DLocal)/2.
- Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0),(dX,DLocal)],['auto'], groups = GN5))
- Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0),(dX,DLocal)],['auto'], groups = GN6))
-
- if DY > DLocal :
- dY = (DY - DLocal)/2.
- if DX > DLocal :
- Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0-DLocal/2.-dY/2.),(dX,dY)],['auto'], groups = GN9))
- Obj.append(MacObject('CompBoxF',[(X0,Y0-DLocal/2.-dY/2.),(DLocal,dY)],['auto'], groups = GN10))
- Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0-DLocal/2.-dY/2.),(dX,dY)],['auto'], groups = GN11))
- Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0+DLocal/2.+dY/2.),(dX,dY)],['auto'], groups = GN12))
- Obj.append(MacObject('CompBoxF',[(X0,Y0+DLocal/2.+dY/2.),(DLocal,dY)],['auto'], groups = GN13))
- Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0+DLocal/2.+dY/2.),(dX,dY)],['auto'], groups = GN14))
- else:
- Obj.append(MacObject('CompBoxF',[(X0,Y0-DLocal/2.-dY/2.),(DLocal,dY)],['auto'], groups = GN7))
- Obj.append(MacObject('CompBoxF',[(X0,Y0+DLocal/2.+dY/2.),(DLocal,dY)],['auto'], groups = GN8))
-
- return Obj
+ GN1 = [None,None,None,None,GroupNames[4]]
+ GN2 = [None,None,None,None,GroupNames[4]]
+ GN3 = [None,None,None,None,GroupNames[4]]
+ GN4 = [None,None,None,None,GroupNames[4]]
+
+ GN5 = [None,None,None,GroupNames[3]]
+ GN6 = [None,None,GroupNames[2],None]
+
+ GN9 = [GroupNames[0],None,None,GroupNames[3]]
+ GN10 = [GroupNames[0],None,None,None]
+ GN11 = [GroupNames[0],None,GroupNames[2],None]
+
+ GN12 = [None,GroupNames[1],None,GroupNames[3]]
+ GN13 = [None,GroupNames[1],None,None]
+ GN14 = [None,GroupNames[1],GroupNames[2],None]
+
+ Obj = []
+
+ Obj.append(MacObject('QuartCyl',[(X0+DLocal/4.,Y0+DLocal/4.),(DLocal/2.,DLocal/2.)],[InternalMeshing,'NE',K], groups = GN1))
+ Obj.append(MacObject('QuartCyl',[(X0-DLocal/4.,Y0+DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','NW',K], groups = GN2))
+ Obj.append(MacObject('QuartCyl',[(X0-DLocal/4.,Y0-DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','SW',K], groups = GN3))
+ Obj.append(MacObject('QuartCyl',[(X0+DLocal/4.,Y0-DLocal/4.),(DLocal/2.,DLocal/2.)],['auto','SE',K], groups = GN4))
+
+ if DX > DLocal :
+ dX = (DX - DLocal)/2.
+ Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0),(dX,DLocal)],['auto'], groups = GN5))
+ Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0),(dX,DLocal)],['auto'], groups = GN6))
+
+ if DY > DLocal :
+ dY = (DY - DLocal)/2.
+ if DX > DLocal :
+ Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0-DLocal/2.-dY/2.),(dX,dY)],['auto'], groups = GN9))
+ Obj.append(MacObject('CompBoxF',[(X0,Y0-DLocal/2.-dY/2.),(DLocal,dY)],['auto'], groups = GN10))
+ Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0-DLocal/2.-dY/2.),(dX,dY)],['auto'], groups = GN11))
+ Obj.append(MacObject('CompBoxF',[(X0+DLocal/2.+dX/2.,Y0+DLocal/2.+dY/2.),(dX,dY)],['auto'], groups = GN12))
+ Obj.append(MacObject('CompBoxF',[(X0,Y0+DLocal/2.+dY/2.),(DLocal,dY)],['auto'], groups = GN13))
+ Obj.append(MacObject('CompBoxF',[(X0-DLocal/2.-dX/2.,Y0+DLocal/2.+dY/2.),(dX,dY)],['auto'], groups = GN14))
+ else:
+ Obj.append(MacObject('CompBoxF',[(X0,Y0-DLocal/2.-dY/2.),(DLocal,dY)],['auto'], groups = GN7))
+ Obj.append(MacObject('CompBoxF',[(X0,Y0+DLocal/2.+dY/2.),(DLocal,dY)],['auto'], groups = GN8))
+
+ return Obj
