+++ /dev/null
-# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# =======================================
-#
-import salome
-salome.salome_init()
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-import math
-
-# Geometrie
-# =========
-
-# Creer un cylindre ayant a chaque bout un morceau de sphere et le tout troue par un petit cylindrique excentre.
-# Decouper en hexahedre et mailler.
-
-# Donnees
-# -------
-
-# unite: millimetre
-
-g_ox = 0
-g_oy = 0
-g_oz = 0
-
-g_cyl_rayon = 1000
-g_cyl_demiHauteur = 3000
-
-g_trou_rayon = 5
-g_trou_centre = 300
-
-g_sphere_rayon = 3500
-
-g_trim = 15000
-
-# Cylindre
-# --------
-
-c_point = geompy.MakeVertex(g_ox, g_oy, g_oz-g_cyl_demiHauteur)
-c_dir = geompy.MakeVectorDXDYDZ(0, 0, 1)
-c_hauteur = 2*g_cyl_demiHauteur
-
-c_cylindre = geompy.MakeCylinder(c_point, c_dir, g_cyl_rayon, c_hauteur)
-
-# Sphere
-# ------
-
-s_hauteur = math.sqrt(g_sphere_rayon*g_sphere_rayon - g_cyl_rayon*g_cyl_rayon) - g_cyl_demiHauteur
-
-s_sphere = geompy.MakeSphere(g_ox, g_oy, g_oz-s_hauteur, g_sphere_rayon)
-
-# Calottes
-# --------
-
-c_outils = []
-c_outils.append(geompy.MakePlane(geompy.MakeVertex(g_ox, g_oy, g_oz+g_cyl_demiHauteur), geompy.MakeVectorDXDYDZ(0, 0, 1), g_trim))
-
-c_cpd = geompy.MakePartition([s_sphere], c_outils, [], [], geompy.ShapeType["SOLID"])
-c_calotte_haut, c_reste = geompy.SubShapeAllSorted(c_cpd, geompy.ShapeType["SOLID"])
-
-c_plan = geompy.MakePlane(geompy.MakeVertex(g_ox, g_oy, g_oz), geompy.MakeVectorDXDYDZ(0, 0, 1), g_trim)
-c_calotte_bas = geompy.MakeMirrorByPlane(c_calotte_haut, c_plan)
-
-# Fusionner
-# ---------
-
-f_piece1 = geompy.MakeFuse(c_cylindre, c_calotte_haut)
-f_piece = geompy.MakeFuse(f_piece1, c_calotte_bas)
-
-# Trouer
-# ------
-
-t_hauteur = g_sphere_rayon
-t_point = geompy.MakeVertex(g_ox-g_trou_centre, g_oy, g_oz-t_hauteur)
-t_trou = geompy.MakeCylinder(t_point, c_dir, g_trou_rayon, 2*t_hauteur)
-
-t_piece = geompy.MakeCut(f_piece, t_trou)
-
-# Decouper
-# --------
-
-h_outils = []
-h_outils.append(geompy.MakePlane(t_point, geompy.MakeVectorDXDYDZ(1, 0, 0), g_trim))
-h_outils.append(geompy.MakePlane(t_point, geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
-
-h_piece = geompy.MakePartition([t_piece], h_outils, [], [], geompy.ShapeType["SOLID"])
-
-# Reparer
-# -------
-
-piece = geompy.RemoveExtraEdges(h_piece)
-
-# Ajouter la piece dans l'etude
-# -----------------------------
-
-piece_id = geompy.addToStudy(piece, "ex18_dome2")
-
-# Maillage
-# ========
-
-# Maillage hexahedrique
-# ---------------------
-
-hexa = smesh.Mesh(piece, "ex18_dome2:hexa")
-
-algo = hexa.Segment()
-algo.NumberOfSegments(2)
-
-hexa.Quadrangle()
-
-hexa.Hexahedron()
-
-# Calcul du maillage
-# ------------------
-
-hexa.Compute()
-
-# Update object browser
-# ---------------------
-
-salome.sg.updateObjBrowser()
