+++ /dev/null
-# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# =======================================
-#
-import salome
-salome.salome_init()
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-# Geometry
-# ========
-
-# A twice holed cube build by points, edges, faces and solids
-
-# Values
-# ------
-
-ox = 0
-oy = 0
-oz = 0
-
-longueur = 200
-largeur = 100
-hauteur = 80
-
-cylindre = 50
-
-rayon = 20
-
-# Points
-# ------
-
-piecePoint1 = geompy.MakeVertex(ox , oy, oz)
-piecePoint2 = geompy.MakeVertex(ox+longueur, oy, oz)
-piecePoint3 = geompy.MakeVertex(ox+longueur, oy, oz+largeur)
-piecePoint4 = geompy.MakeVertex(ox , oy, oz+largeur)
-
-cz = oz+largeur/2
-
-cylPoint1 = geompy.MakeVertex(ox+cylindre , oy, cz-rayon)
-cylPoint2 = geompy.MakeVertex(ox+longueur-cylindre, oy, cz-rayon)
-cylPoint3 = geompy.MakeVertex(ox+longueur-cylindre, oy, cz+rayon)
-cylPoint4 = geompy.MakeVertex(ox+cylindre , oy, cz+rayon)
-
-# Edges
-# -----
-
-pieceEdge1 = geompy.MakeEdge(piecePoint1, piecePoint4)
-pieceEdge2 = geompy.MakeEdge(piecePoint1, cylPoint1)
-pieceEdge3 = geompy.MakeEdge(piecePoint4, cylPoint4)
-
-pieceEdge4 = geompy.MakeEdge(piecePoint2, piecePoint3)
-pieceEdge5 = geompy.MakeEdge(piecePoint2, cylPoint2)
-pieceEdge6 = geompy.MakeEdge(piecePoint3, cylPoint3)
-
-pieceEdge7 = geompy.MakeEdge(cylPoint1, cylPoint2)
-pieceEdge8 = geompy.MakeEdge(cylPoint3, cylPoint4)
-
-cylEdge1 = geompy.MakeArc(cylPoint1, geompy.MakeVertex(ox+cylindre-rayon , oy, cz), cylPoint4)
-cylEdge2 = geompy.MakeArc(cylPoint1, geompy.MakeVertex(ox+cylindre+rayon , oy, cz), cylPoint4)
-cylEdge3 = geompy.MakeArc(cylPoint2, geompy.MakeVertex(ox+longueur-cylindre-rayon, oy, cz), cylPoint3)
-cylEdge4 = geompy.MakeArc(cylPoint2, geompy.MakeVertex(ox+longueur-cylindre+rayon, oy, cz), cylPoint3)
-
-# Faces
-# -----
-
-pieceFace1 = geompy.MakeQuad4Vertices(piecePoint1, piecePoint2, cylPoint2 , cylPoint1 )
-pieceFace2 = geompy.MakeQuad (pieceEdge1 , pieceEdge2 , cylEdge1 , pieceEdge3)
-pieceFace3 = geompy.MakeQuad4Vertices(piecePoint3, piecePoint4, cylPoint4 , cylPoint3 )
-pieceFace4 = geompy.MakeQuad (pieceEdge4 , pieceEdge5 , cylEdge4 , pieceEdge6)
-pieceFace5 = geompy.MakeQuad (pieceEdge7 , cylEdge3 , pieceEdge8, cylEdge2 )
-
-# Solids
-# ------
-
-pieceVector = geompy.MakeVectorDXDYDZ(0, 1, 0)
-
-pieceSolid1 = geompy.MakePrismVecH(pieceFace1, pieceVector, hauteur)
-pieceSolid2 = geompy.MakePrismVecH(pieceFace2, pieceVector, hauteur)
-pieceSolid3 = geompy.MakePrismVecH(pieceFace3, pieceVector, hauteur)
-pieceSolid4 = geompy.MakePrismVecH(pieceFace4, pieceVector, hauteur)
-pieceSolid5 = geompy.MakePrismVecH(pieceFace5, pieceVector, hauteur)
-
-# Compound and glue
-# -----------------
-
-c_cpd = geompy.MakeCompound([pieceSolid1, pieceSolid2, pieceSolid3, pieceSolid4, pieceSolid5])
-
-piece = geompy.MakeGlueFaces(c_cpd, 1.e-5)
-
-# Add in study
-# ------------
-
-piece_id = geompy.addToStudy(piece, "ex08_hole2build")
-
-# Meshing
-# =======
-
-# Create a hexahedral mesh
-# ------------------------
-
-hexa = smesh.Mesh(piece, "ex08_hole2build:hexa")
-
-algo = hexa.Segment()
-algo.NumberOfSegments(7)
-
-hexa.Quadrangle()
-
-hexa.Hexahedron()
-
-# Mesh calculus
-# -------------
-
-hexa.Compute()
-
-# Update object browser
-# ---------------------
-
-salome.sg.updateObjBrowser()
