]> SALOME platform Git repositories - modules/shaper.git/commitdiff
Salome HOME
Issue #2299: Wrong face support of sketch in script from python dump
authorazv <azv@opencascade.com>
Sun, 26 Nov 2017 10:36:46 +0000 (13:36 +0300)
committerazv <azv@opencascade.com>
Sun, 26 Nov 2017 10:36:46 +0000 (13:36 +0300)
Adjust test cases to fix problems with the edge enumeration.

24 files changed:
src/CollectionPlugin/Test/TestGroup1799.py
src/FeaturesPlugin/Test/Test2197_3.py
src/FeaturesPlugin/Test/Test2197_4.py
src/FeaturesPlugin/Test/Test2240.py
src/FeaturesPlugin/Test/Test2248.py
src/FeaturesPlugin/Test/TestExtrusion.py
src/ModelAPI/Test/Test1064.py
src/ModelAPI/Test/Test1757.py
src/ModelAPI/Test/Test2241.py
src/ModelAPI/Test/TestCustomName_Placement.py
src/PythonAPI/examples/Platine.py
src/SketchPlugin/Test/TestProjectionIntoResult.py
test.API/SHAPER/Primitives/TestBox.py
test.models/CSWA.py
test.models/angle30.py
test.models/bearing_puller.py
test.models/bushing.py
test.models/case24.py
test.models/clothespin.py
test.models/ecran.py
test.models/gear.py
test.models/piece_02.py
test.models/piece_09.py
test.models/piece_12.py

index d048d7b4a0cc199b579191035a9fe4890d9dac21..5d67a8fd40f9ce419f42c2767968094802a515f6 100644 (file)
@@ -116,11 +116,11 @@ SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_2.
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r-SketchLine_5f-SketchLine_6f-SketchLine_9r-SketchLine_10r"), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchCircle_1_2r-SketchLine_7f-SketchLine_9f-SketchLine_12r"), model.selection("FACE", "Sketch_1/Face-SketchLine_4f-SketchCircle_1_2r-SketchLine_8f-SketchLine_11r-SketchLine_12f"), model.selection("FACE", "Sketch_1/Face-SketchLine_2f-SketchLine_3f-SketchCircle_1_2r-SketchLine_10f-SketchLine_11f")], model.selection(), 150, 0)
 Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "Extrusion_1_1/To_Face_1"), model.selection("FACE", "Extrusion_1_1/To_Face_4"), model.selection("FACE", "Extrusion_1_1/To_Face_3"), model.selection("FACE", "Extrusion_1_1/To_Face_2")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 150, True)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_15"), 150, True)
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"), 150, True)
 Partition_1 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_1"), model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("FACE", "Plane_2")])
 Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_7/Modified_Face_2_4"), 110, True)
-Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_3/Modified_Face_3_5"), 380, True)
+Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Partition_1_1_5/Modified_Face_3_4"), 380, True)
 Partition_2 = model.addPartition(Part_1_doc, [model.selection("FACE", "Plane_3"), model.selection("COMPSOLID", "Partition_1_1"), model.selection("FACE", "Plane_4")])
 model.do()
 
index e07e3e154ee3f87c02f12aff1b7b1411e29b7a7a..6ce089431641e386e80f32c1eaaecae588be27e1 100644 (file)
@@ -36,7 +36,7 @@ SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(),
 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), 360, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_4"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Base_Edge_3")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Lateral_Edge_3"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Lateral_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Base_Edge_3")])
 model.end()
 
 # check that resulting group selection is valid
index 9ebe471a7456f689f499c2a5612d1e081190825c..d68bbf00c05ec1336ae72d513fbaf97c13d6e57f 100644 (file)
@@ -52,7 +52,7 @@ SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(),
 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_7")
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), 360, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3&Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_2")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Revolution_1_1/Generated_Face_5&Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4&Revolution_1_1/Generated_Face_3"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3&Revolution_1_1/Generated_Face_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_2"), model.selection("EDGE", "Revolution_1_1/Base_Edge_1"), model.selection("EDGE", "Revolution_1_1/Generated_Face_4"), model.selection("EDGE", "Revolution_1_1/Generated_Face_3")])
 model.end()
 
 # check that resulting group selection is valid
index 5d629f65db7ae99ada5b542b7a80cc3eb40a6b72..bab4cc8ba57f36153a915d809d509ffe1375a3a5 100644 (file)
@@ -106,7 +106,7 @@ Group_2.result().setName("acier")
 Group_2.result().setColor(170, 85, 0)
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0)
-SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Partition_1_1_1/Modified_Edge_15_18&Partition_1_1_1/Modified_Edge_15_17"))
+SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Partition_1_1_1/Modified_Edge_15_15&Partition_1_1_1/Modified_Edge_15_16"))
 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
 SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10)
 SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10)
index 89f15dd57e38564aa82aab891e05d74fbf80111b..20e48f5b9a5f339618c0318eef7cf59d027fd460 100644 (file)
@@ -48,7 +48,7 @@ SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc
 SketchCircle_1 = Sketch_1.addCircle(-13.45056286489504, 169.4770920976776, 150.6703210346195)
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
-Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")])
+Group_1 = model.addGroup(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_2"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_3"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_7"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_4"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_11&Extrusion_1_1/Generated_Face_10"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7")])
 model.end()
 
 # check that resulting group selection is valid
index 4d3daea4479f0bff6399c6796b338396d77185b6..5e44cac127913e038df1dc283cb72ffa9e22fb89 100644 (file)
@@ -250,9 +250,9 @@ anExtrusionFt.selectionList("base").append(
 anExtrusionFt.string("CreationMethod").setValue("ByPlanesAndOffsets")
 anExtrusionFt.real("to_size").setValue(0) #TODO: remove
 anExtrusionFt.real("from_size").setValue(0) #TODO: remove
-anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_2")
+anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_3")
 anExtrusionFt.real("to_offset").setValue(0)
-anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_1")
+anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_4")
 anExtrusionFt.real("from_offset").setValue(0)
 anExtrusionFt.execute()
 aSession.finishOperation()
index d94163a191e231dab4433599a4676e5ada4a8c41..bd2599e08c9ca09a496b8c57848ff9458289c8a2 100644 (file)
@@ -93,7 +93,7 @@ aSession.setActiveDocument(aPartSet)
 aPlane = aPartSet.addFeature("Plane")
 aPlane.string("creation_method").setValue("by_other_plane")
 aPlane.string("by_other_plane_option").setValue("by_distance_from_other")
-aPlane.selection("plane").selectSubShape("face", "Part_1/Extrusion_1_1/Generated_Face_1")
+aPlane.selection("plane").selectSubShape("face", "Part_1/Extrusion_1_1/Generated_Face_2")
 aPlane.real("distance").setValue(0.001)
 aPlane.boolean("reverse").setValue(False)
 aSession.finishOperation()
index 8c300a57886effcf4f02b764f1dc0f22db8030dd..431f7300d10ecd8a6a7ced984063650190976512 100644 (file)
@@ -125,6 +125,6 @@ import ModelAPI
 
 assert(ModelAPI.ModelAPI_Session.get().validators().validate(Sketch_4.feature()))
 assert(ModelAPI.ModelAPI_Session.get().validators().validate(ExtrusionCut_2.feature()))
-assert(Sketch_3.feature().selection("External").namingName() == "Extrusion_1_1/Modfied_6")
+assert(Sketch_3.feature().selection("External").namingName() == "_Extrusion_1_1/Modfied_4")
 
 assert(model.checkPythonDump())
index 89c8a70ee30103648ac52e3d88ca90ab982d5d81..dd5e5f8694c59b07eb34c221463c36216f277c4d 100644 (file)
@@ -99,7 +99,7 @@ Face_3 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-Sketc
 Face_4 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_2_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_3_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_4_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_5_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_7_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_6_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_9_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_8_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_10_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_12_2"), model.selection("EDGE", "Sketch_2/Edge-SketchCircle_11_2"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_9f-SketchLine_10r-SketchArc_2_2f")])
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchLine_11 = Sketch_3.addLine(40, 0, 30, 0)
-SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Face_1_1/Edge_4&Face_1_1/Edge_5"))
+SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "Face_1_1/Edge_6&Face_1_1/Edge_7"))
 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
 SketchLine_12 = Sketch_3.addLine(30, 0, 30, 10)
 SketchLine_13 = Sketch_3.addLine(30, 10, 40, 10)
@@ -121,19 +121,19 @@ model.do()
 Face_5 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_11r-SketchLine_12r-SketchLine_13r-SketchLine_14r")])
 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Face_5_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 Recover_1 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"))
+Translation_1 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_1_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"))
 Translation_1.result().setName("Translation_1_1")
 MultiTranslation_2 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_1_1")], model.selection("EDGE", "PartSet/OX"), "l", 4, model.selection("EDGE", "PartSet/OY"), "l", 2)
 Recover_2 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_8&Face_4_1/Edge_9"))
+Translation_2 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_2_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_2&Face_4_1/Edge_3"))
 Translation_2.result().setName("Translation_2_1")
 MultiTranslation_3 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_2_1")], model.selection("EDGE", "PartSet/OX"), "l", 4)
 Recover_3 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_1"))
+Translation_3 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_3_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Translation_2_1/Translated_Edge_1_4&Translation_2_1/Translated_Edge_1_3"))
 Translation_3.result().setName("Translation_3_1")
 MultiTranslation_4 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_3_1")], model.selection("EDGE", "PartSet/OX"), "l", 3)
 Recover_4 = model.addRecover(Part_1_doc, MultiTranslation_1, [Face_5.result()])
-Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_4&Face_4_1/Edge_5"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_2"))
+Translation_4 = model.addTranslation(Part_1_doc, [model.selection("FACE", "Recover_4_1")], model.selection("VERTEX", "Face_4_1/Edge_6&Face_4_1/Edge_7"), model.selection("VERTEX", "Face_4_1/Edge_1&Face_4_1/Edge_9"))
 Translation_4.result().setName("Translation_4_1")
 MultiTranslation_5 = model.addMultiTranslation(Part_1_doc, [model.selection("FACE", "Translation_4_1")], model.selection("EDGE", "PartSet/OX"), "l", 2)
 Group_1 = model.addGroup(Part_1_doc, [model.selection("FACE", "MultiTranslation_4_1_2"), model.selection("FACE", "MultiTranslation_1_1_8"), model.selection("FACE", "MultiTranslation_1_1_4"), model.selection("FACE", "MultiTranslation_1_1_3"), model.selection("FACE", "MultiTranslation_1_1_6"), model.selection("FACE", "MultiTranslation_1_1_2"), model.selection("FACE", "MultiTranslation_1_1_7"), model.selection("FACE", "MultiTranslation_2_1_3"), model.selection("FACE", "MultiTranslation_3_1_4"), model.selection("FACE", "MultiTranslation_2_1_8"), model.selection("FACE", "MultiTranslation_2_1_4"), model.selection("FACE", "MultiTranslation_2_1_7"), model.selection("FACE", "MultiTranslation_4_1_3"), model.selection("FACE", "MultiTranslation_1_1_1"), model.selection("FACE", "MultiTranslation_5_1_2"), model.selection("FACE", "MultiTranslation_4_1_1"), model.selection("FACE", "MultiTranslation_5_1_1"), model.selection("FACE", "MultiTranslation_3_1_3"), model.selection("FACE", "MultiTranslation_3_1_2"), model.selection("FACE", "MultiTranslation_3_1_1"), model.selection("FACE", "MultiTranslation_2_1_6"), model.selection("FACE", "MultiTranslation_2_1_2"), model.selection("FACE", "MultiTranslation_2_1_5"), model.selection("FACE", "MultiTranslation_2_1_1"), model.selection("FACE", "MultiTranslation_1_1_5")])
index 2d86f757d51dcf73f7c3f90941f269a797620fdb..b8cd116e425e83ba8d5f85ae79fa1b7996053fea 100644 (file)
@@ -46,7 +46,7 @@ Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/
 Extrusion_1.result().setName("prism")
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0)
 Revolution_1.result().setName("spinner")
-Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "spinner")], model.selection("VERTEX", "spinner/Lateral_Edge_1&spinner/Base_Edge_2"), model.selection("FACE", "prism/Generated_Face_1"), False, True)
+Placement_1 = model.addPlacement(Part_1_doc, [model.selection("SOLID", "spinner")], model.selection("VERTEX", "spinner/Lateral_Edge_1&spinner/Base_Edge_1"), model.selection("FACE", "prism/Generated_Face_2"), False, True)
 model.do()
 
 assert(Placement_1.result().name() == Revolution_1.result().name()), "Placement name '{}' != '{}'".format(Placement_1.result().name(), Revolution_1.result().name())
index 32428becf16d9d52d25c50425887f0a3138eecce..800ce0e05fbec009dcfc5543ffc70186ca71dc30 100644 (file)
@@ -132,7 +132,7 @@ def bottom_body():
 
 def body_3():
     # Create XOZ sketch
-    sketch = model.addSketch(part, "Boolean_1_1/Modified_2")
+    sketch = model.addSketch(part, "Boolean_1_1/Modified_3")
 
     # Create base polygon
     H, L, l, r = 28, 40, 8, 12
@@ -170,7 +170,7 @@ def body_3():
     sketch.setRadius(arc, r)
 
     # Binding
-    bottom_e = sketch.addLine("Boolean_1_1/Modified_7&Boolean_1_1/Modified_5")
+    bottom_e = sketch.addLine("Boolean_1_1/Modified_8&Boolean_1_1/Modified_5")
     sketch.setCoincident(bottom_e, bottom.startPoint())
     sketch.setCoincident(bottom_e.startPoint(), bottom.endPoint())
 
@@ -196,7 +196,7 @@ def body_4():
     sketch.setCoincident(bottom_e.endPoint(), bottom.startPoint())
     sketch.setCoincident(bottom_e.startPoint(), left.startPoint())
 
-    left_e = sketch.addLine("Boolean_2_1/Modified_6&Boolean_2_1/Modified_8")
+    left_e = sketch.addLine("Boolean_2_1/Modified_6&Boolean_2_1/Modified_7")
     sketch.setCoincident(left_e.startPoint(), left.endPoint())
 
     model.do()  #!!!
index 6ec5968e51fb9224ed09312732217cb2f2526780..adfd8ebcc316eeaec98e351e605599b44e3e00ae 100644 (file)
@@ -95,19 +95,19 @@ aProjectedList = [("EDGE", "Sketch_1/Edge-SketchCircle_1_2"),
                   ("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"),
                   #
                   ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"),
                   ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/From_Face_1"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"),
                   #
-                  ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"),
                   ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"),
                   #
                   ("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"),
+                  ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"),
                   ("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1"),
-                  ("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1")
+                  ("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1")
                   ]
 
 # Test projection to the same plane
@@ -129,12 +129,12 @@ Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To
 testProjections(Part_1_doc, Sketch_6, aProjectedList, aFailedIDs)
 
 # Test projection to orthogonal side face of the prism
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 aFailedIDs = set([0, 1, 18, 20, 26, 28])
 testProjections(Part_1_doc, Sketch_7, aProjectedList, aFailedIDs)
 
 # Test projection to slope side face of the prism
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
 aFailedIDs = set([0, 1])
 testProjections(Part_1_doc, Sketch_8, aProjectedList, aFailedIDs)
 
index 95e76725ba00f75c8cf3e224bda0ee3e1e059a11..772056c0a4731b86c15ddd631a455f69598adbed 100644 (file)
@@ -82,7 +82,7 @@ Box_12 = model.addBox(Part_1_doc, Point_1, Point_5)
 Box_13 = model.addBox(Part_1_doc, Vertex_3, Point_2)
 Box_14 = model.addBox(Part_1_doc, Point_2, Vertex_3)
 Box_15 = model.addBox(Part_1_doc, model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_4e"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_7s-SketchLine_6e"))
-Box_16 = model.addBox(Part_1_doc, model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
+Box_16 = model.addBox(Part_1_doc, model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), model.selection("VERTEX", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/Generated_Face_2&Extrusion_2_1/To_Face_1"))
 Box_17 = model.addBox(Part_1_doc, model.selection("VERTEX", "Vertex_1_1"), model.selection("VERTEX", "Vertex_2_1"))
 Box_18 = model.addBox(Part_1_doc, "dx", "dy", "dz")
 model.do()
index cc859057daa165dce839162f71b195789ec73864..7029f13964babaeabd6584891ea42243dfeaba2a 100644 (file)
@@ -95,7 +95,7 @@ SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2")
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"))
 SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25)
 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
@@ -104,14 +104,14 @@ model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
-SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
 SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
+SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
 SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001)
@@ -130,7 +130,7 @@ model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1"))
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/To_Face_1"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/To_Face_1"))
 SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center())
 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
@@ -169,13 +169,13 @@ model.do()
 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
 ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3"))
-SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_5"))
+SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7"))
 SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True)
 SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center())
 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
 SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint())
 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
-SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_4"))
+SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_8"))
 SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35)
 SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48)
 SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint())
@@ -201,7 +201,7 @@ ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Ske
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_4"))
 SketchCircle_4 = Sketch_7.addCircle(45, 35, 5)
-SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_4"))
+SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_4"))
 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10)
 SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
 SketchLine_21 = Sketch_7.addLine(35, 35, 45, 35)
@@ -215,7 +215,7 @@ SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result())
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
 SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25)
 SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13)
 SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13)
@@ -234,15 +234,15 @@ SketchConstraintHorizontal_6 = Sketch_8.setHorizontal(SketchLine_24.result())
 SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result())
 SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50)
 SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12)
-SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_2"))
+SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_1"))
 SketchLine_26 = SketchProjection_1.createdFeature()
 SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result())
 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
-SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_8"))
+SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_4"))
 SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result())
 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 model.do()
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
 ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2"))
 SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63)
index 14fbe4b7074a40d2604c8bfbb1449799895d9ec2..8bed73f7c2ca3fc2b5251eecc66efd1c4f38ef93 100644 (file)
@@ -498,18 +498,18 @@ Boolean_5.result().setName("Boolean_5_1")
 Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
 Boolean_6.result().setName("Boolean_6_1")
 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1"))
 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
 SketchLine_54.setName("SketchLine_66")
 SketchLine_54.result().setName("SketchLine_66")
-SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/To_Face_1"))
+SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1"))
 SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70)
 SketchLine_55.setName("SketchLine_57")
 SketchLine_55.result().setName("SketchLine_57")
 SketchLine_55.setAuxiliary(True)
 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result())
 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95")
-SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/To_Face_1"))
+SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1"))
 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result())
 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96")
 SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70)
@@ -521,7 +521,7 @@ SketchLine_57.result().setName("SketchLine_58")
 SketchLine_57.setAuxiliary(True)
 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97")
-SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/From_Face_1"))
+SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1"))
 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result())
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98")
 SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024)
@@ -531,7 +531,7 @@ SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024)
 SketchLine_59.setAuxiliary(True)
 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99")
-SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/From_Face_1"))
+SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1"))
 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100")
 SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -61.32702426187202, -9.237604307034024)
@@ -611,7 +611,7 @@ SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
 SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
 SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
 SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11)
-SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6"))
+SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1"))
 SketchLine_66.setName("SketchLine_69")
 SketchLine_66.result().setName("SketchLine_69")
 SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11)
@@ -620,18 +620,18 @@ SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), Sket
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_5"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3"))
 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 SketchLine_67.setName("SketchLine_79")
 SketchLine_67.result().setName("SketchLine_79")
-SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5"))
+SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3"))
 SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
 SketchLine_68.setName("SketchLine_70")
 SketchLine_68.result().setName("SketchLine_70")
 SketchLine_68.setAuxiliary(True)
 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
-SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
 SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
@@ -643,7 +643,7 @@ SketchLine_70.result().setName("SketchLine_71")
 SketchLine_70.setAuxiliary(True)
 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122")
-SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123")
 SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
@@ -653,7 +653,7 @@ SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366588218793
 SketchLine_72.setAuxiliary(True)
 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
-SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5"))
+SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3"))
 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
 SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
index f5f3a09f5d39e4f2079a5c002915b9300cc84d8c..fc234273f2010e96e3b1491f6c0df56bc22c9f8c 100644 (file)
@@ -100,14 +100,14 @@ SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_5.startPoint(
 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_35")
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_4r-SketchArc_1_2f-SketchArc_2_2f-SketchLine_28r-SketchLine_29r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_2"))
 SketchLine_8 = Sketch_2.addLine(0, 0, 25, 43.30127018922193)
 SketchLine_8.setName("SketchLine_5")
 SketchLine_8.result().setName("SketchLine_5")
 SketchLine_8.setAuxiliary(True)
 SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchPoint_3.result())
-SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5"))
+SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1"))
 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1])
 SketchLine_9 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 15.87711932209923, -2.499977343709401)
 SketchLine_9.setName("SketchLine_10")
@@ -117,7 +117,7 @@ SketchLine_10.setName("SketchLine_6")
 SketchLine_10.result().setName("SketchLine_6")
 SketchLine_10.setAuxiliary(True)
 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result())
-SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_6&Revolution_1_1/Generated_Face_5"))
+SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1"))
 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1])
 SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192)
 SketchLine_12 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
@@ -228,7 +228,7 @@ SketchLine_22.result().setName("SketchLine_19")
 SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPoint_3.coordinates(), 21)
 SketchConstraintDistance_9.setName("SketchConstraintDistance_8")
 model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_2"), 10)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 10)
 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
 Boolean_1.result().setName("Boolean_1_1")
 Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
@@ -565,7 +565,7 @@ SketchLine_99 = Sketch_10.addLine(model.selection("EDGE", "PartSet/OY"))
 SketchConstraintDistance_35 = Sketch_10.setDistance(SketchLine_98.endPoint(), SketchLine_99.result(), "Thickness")
 model.do()
 Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_6r")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"), 360, 0)
-Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1"))
 SketchCircle_14 = Sketch_11.addCircle(0, 0, 8.5)
 SketchCircle_14.setAuxiliary(True)
 SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_6e"))
@@ -607,7 +607,7 @@ SketchConstraintCoincidence_248 = Sketch_12.setCoincident(SketchLine_106.startPo
 SketchConstraintHorizontal_20 = Sketch_12.setHorizontal(SketchLine_107.result())
 SketchConstraintVertical_20 = Sketch_12.setVertical(SketchLine_106.result())
 SketchConstraintAngle_8 = Sketch_12.setAngle(SketchLine_108.result(), SketchLine_107.result(), 30)
-SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"))
+SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"))
 SketchConstraintCoincidence_249 = Sketch_12.setCoincident(SketchLine_108.endPoint(), SketchLine_109.result())
 SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
 SketchLine_110 = SketchProjection_2.createdFeature()
index fa58032322e899abf8136ebfd558cfab0764b312..f095cbb63e47ed54c2132aa19d46cd8d08a99de7 100644 (file)
@@ -583,7 +583,7 @@ SketchLine_379 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_379.result(), 15)
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_8f-SketchLine_9f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_14f")], model.selection("EDGE", "PartSet/OX"), 360, 0)
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchArc_2_2r-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_7"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_1_2r-SketchLine_382f-SketchLine_383f-SketchLine_20f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f-SketchLine_30f-SketchLine_31f-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f-SketchLine_36f-SketchLine_37f-SketchLine_38f-SketchLine_39f-SketchLine_40f-SketchLine_41f-SketchLine_42f-SketchLine_43f-SketchLine_44f-SketchLine_45f-SketchLine_46f-SketchLine_47f-SketchLine_48f-SketchLine_49f-SketchLine_50f-SketchLine_51f-SketchLine_52f-SketchLine_53f-SketchLine_54f-SketchLine_55f-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchLine_59f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchLine_65f-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_69f-SketchLine_70f-SketchLine_71f-SketchLine_72f-SketchLine_73f-SketchLine_74f-SketchLine_75f-SketchLine_76f-SketchLine_77f-SketchLine_78f-SketchLine_79f-SketchLine_80f-SketchLine_81f-SketchLine_82f-SketchLine_83f-SketchLine_84f-SketchLine_85f-SketchLine_86f-SketchLine_87f-SketchLine_88f-SketchLine_89f-SketchLine_90f-SketchLine_91f-SketchLine_92f-SketchLine_93f-SketchLine_94f-SketchLine_95f-SketchLine_96f-SketchLine_97f-SketchLine_98f-SketchLine_99f-SketchLine_100f-SketchLine_101f-SketchLine_102f-SketchLine_103f-SketchLine_104f-SketchLine_105f-SketchLine_106f-SketchLine_107f-SketchLine_108f-SketchLine_109f-SketchLine_110f-SketchLine_111f-SketchLine_112f-SketchLine_113f-SketchLine_114f-SketchLine_115f-SketchLine_116f-SketchLine_117f-SketchLine_118f-SketchLine_119f-SketchLine_120f-SketchLine_121f-SketchLine_122f-SketchLine_123f-SketchLine_124f-SketchLine_125f-SketchLine_126f-SketchLine_127f-SketchLine_128f-SketchLine_129f-SketchLine_130f-SketchLine_131f-SketchLine_132f-SketchLine_133f-SketchLine_134f-SketchLine_135f-SketchLine_136f-SketchLine_137f-SketchLine_138f-SketchLine_139f-SketchLine_140f-SketchLine_141f-SketchLine_142f-SketchLine_143f-SketchLine_144f-SketchLine_145f-SketchLine_146f-SketchLine_147f-SketchLine_148f-SketchLine_149f-SketchLine_150f-SketchLine_151f-SketchLine_152f-SketchLine_153f-SketchLine_154f-SketchLine_155f-SketchLine_156f-SketchLine_157f-SketchLine_158f-SketchLine_159f-SketchLine_160f-SketchLine_161f-SketchLine_162f-SketchLine_163f-SketchLine_164f-SketchLine_165f-SketchLine_166f-SketchLine_167f-SketchLine_168f-SketchLine_169f-SketchLine_170f-SketchLine_171f-SketchLine_172f-SketchLine_173f-SketchLine_174f-SketchLine_175f-SketchLine_176f-SketchLine_177f-SketchLine_178f-SketchLine_179f-SketchLine_180f-SketchLine_181f-SketchLine_182f-SketchLine_183f-SketchLine_184f-SketchLine_185f-SketchLine_186f-SketchLine_187f-SketchLine_188f-SketchLine_189f-SketchLine_190f-SketchLine_191f-SketchLine_192f-SketchLine_193f-SketchLine_194f-SketchLine_195f-SketchLine_196f-SketchLine_197f-SketchLine_198f-SketchLine_199f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2r-SketchArc_5_2r-SketchArc_6_2r-SketchArc_7_2r-SketchArc_8_2r-SketchArc_9_2r-SketchArc_10_2r-SketchArc_11_2r-SketchArc_12_2r-SketchArc_13_2r-SketchArc_14_2r-SketchArc_15_2r-SketchArc_16_2r-SketchArc_17_2r-SketchArc_18_2r-SketchArc_19_2r-SketchArc_20_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_23_2r-SketchArc_24_2r-SketchArc_25_2r-SketchArc_26_2r-SketchArc_27_2r-SketchArc_28_2r-SketchArc_29_2r-SketchArc_30_2r-SketchArc_31_2r-SketchArc_32_2r-SketchArc_33_2r-SketchArc_34_2r-SketchArc_35_2r-SketchArc_36_2r-SketchArc_37_2r-SketchArc_38_2r-SketchArc_39_2r-SketchArc_40_2r-SketchArc_41_2r-SketchArc_42_2r-SketchArc_43_2r-SketchArc_44_2r-SketchArc_45_2r-SketchArc_46_2r-SketchArc_47_2r-SketchArc_48_2r-SketchArc_49_2r-SketchArc_50_2r-SketchArc_51_2r-SketchArc_52_2r-SketchArc_53_2r-SketchArc_54_2r-SketchArc_55_2r-SketchArc_56_2r-SketchArc_57_2r-SketchArc_58_2r-SketchArc_59_2r-SketchArc_60_2r-SketchArc_61_2r-SketchArc_62_2r-SketchArc_63_2r-SketchArc_64_2r-SketchArc_65_2r-SketchArc_66_2r-SketchArc_67_2r-SketchArc_68_2r-SketchArc_69_2r-SketchArc_70_2r-SketchArc_71_2r-SketchArc_72_2r-SketchArc_73_2r-SketchArc_74_2r-SketchArc_75_2r-SketchArc_76_2r-SketchArc_77_2r-SketchArc_78_2r-SketchArc_79_2r-SketchArc_80_2r-SketchArc_81_2r-SketchArc_82_2r-SketchArc_83_2r-SketchArc_84_2r-SketchArc_85_2r-SketchArc_86_2r-SketchArc_87_2r-SketchArc_88_2r-SketchArc_89_2r-SketchArc_90_2r-SketchArc_91_2r-SketchArc_92_2r-SketchArc_93_2r-SketchArc_94_2r-SketchArc_95_2r-SketchArc_96_2r-SketchArc_97_2r-SketchArc_98_2r-SketchArc_99_2r-SketchArc_100_2r-SketchArc_101_2r-SketchArc_102_2r-SketchArc_103_2r-SketchArc_104_2r-SketchArc_105_2r-SketchArc_106_2r-SketchArc_107_2r-SketchArc_108_2r-SketchArc_109_2r-SketchArc_110_2r-SketchArc_111_2r-SketchArc_112_2r-SketchArc_113_2r-SketchArc_114_2r-SketchArc_115_2r-SketchArc_116_2r-SketchArc_117_2r-SketchArc_118_2r-SketchArc_119_2r-SketchArc_120_2r-SketchArc_121_2r-SketchArc_122_2r-SketchArc_123_2r-SketchArc_124_2r-SketchArc_125_2r-SketchArc_126_2r-SketchArc_127_2r-SketchArc_128_2r-SketchArc_129_2r-SketchArc_130_2r-SketchArc_131_2r-SketchArc_132_2r-SketchArc_133_2r-SketchArc_134_2r-SketchArc_135_2r-SketchArc_136_2r-SketchArc_137_2r-SketchArc_138_2r-SketchArc_139_2r-SketchArc_140_2r-SketchArc_141_2r-SketchArc_142_2r-SketchArc_143_2r-SketchArc_144_2r-SketchArc_145_2r-SketchArc_146_2r-SketchArc_147_2r-SketchArc_148_2r-SketchArc_149_2r-SketchArc_150_2r-SketchArc_151_2r-SketchArc_152_2r-SketchArc_153_2r-SketchArc_154_2r-SketchArc_155_2r-SketchArc_156_2r-SketchArc_157_2r-SketchArc_158_2r-SketchArc_159_2r-SketchArc_160_2r-SketchArc_161_2r-SketchArc_162_2r-SketchArc_163_2r-SketchArc_164_2r-SketchArc_165_2r-SketchArc_166_2r-SketchArc_167_2r-SketchArc_168_2r-SketchArc_169_2r-SketchArc_170_2r-SketchArc_171_2r-SketchArc_172_2r-SketchArc_173_2r-SketchArc_174_2r-SketchArc_175_2r-SketchArc_176_2r-SketchArc_177_2r-SketchArc_178_2r-SketchArc_179_2r-SketchArc_180_2r-SketchLine_21f-SketchLine_200f-SketchLine_201f-SketchLine_202f-SketchLine_203f-SketchLine_204f-SketchLine_205f-SketchLine_206f-SketchLine_207f-SketchLine_208f-SketchLine_209f-SketchLine_210f-SketchLine_211f-SketchLine_212f-SketchLine_213f-SketchLine_214f-SketchLine_215f-SketchLine_216f-SketchLine_217f-SketchLine_218f-SketchLine_219f-SketchLine_220f-SketchLine_221f-SketchLine_222f-SketchLine_223f-SketchLine_224f-SketchLine_225f-SketchLine_226f-SketchLine_227f-SketchLine_228f-SketchLine_229f-SketchLine_230f-SketchLine_231f-SketchLine_232f-SketchLine_233f-SketchLine_234f-SketchLine_235f-SketchLine_236f-SketchLine_237f-SketchLine_238f-SketchLine_239f-SketchLine_240f-SketchLine_241f-SketchLine_242f-SketchLine_243f-SketchLine_244f-SketchLine_245f-SketchLine_246f-SketchLine_247f-SketchLine_248f-SketchLine_249f-SketchLine_250f-SketchLine_251f-SketchLine_252f-SketchLine_253f-SketchLine_254f-SketchLine_255f-SketchLine_256f-SketchLine_257f-SketchLine_258f-SketchLine_259f-SketchLine_260f-SketchLine_261f-SketchLine_262f-SketchLine_263f-SketchLine_264f-SketchLine_265f-SketchLine_266f-SketchLine_267f-SketchLine_268f-SketchLine_269f-SketchLine_270f-SketchLine_271f-SketchLine_272f-SketchLine_273f-SketchLine_274f-SketchLine_275f-SketchLine_276f-SketchLine_277f-SketchLine_278f-SketchLine_279f-SketchLine_280f-SketchLine_281f-SketchLine_282f-SketchLine_283f-SketchLine_284f-SketchLine_285f-SketchLine_286f-SketchLine_287f-SketchLine_288f-SketchLine_289f-SketchLine_290f-SketchLine_291f-SketchLine_292f-SketchLine_293f-SketchLine_294f-SketchLine_295f-SketchLine_296f-SketchLine_297f-SketchLine_298f-SketchLine_299f-SketchLine_300f-SketchLine_301f-SketchLine_302f-SketchLine_303f-SketchLine_304f-SketchLine_305f-SketchLine_306f-SketchLine_307f-SketchLine_308f-SketchLine_309f-SketchLine_310f-SketchLine_311f-SketchLine_312f-SketchLine_313f-SketchLine_314f-SketchLine_315f-SketchLine_316f-SketchLine_317f-SketchLine_318f-SketchLine_319f-SketchLine_320f-SketchLine_321f-SketchLine_322f-SketchLine_323f-SketchLine_324f-SketchLine_325f-SketchLine_326f-SketchLine_327f-SketchLine_328f-SketchLine_329f-SketchLine_330f-SketchLine_331f-SketchLine_332f-SketchLine_333f-SketchLine_334f-SketchLine_335f-SketchLine_336f-SketchLine_337f-SketchLine_338f-SketchLine_339f-SketchLine_340f-SketchLine_341f-SketchLine_342f-SketchLine_343f-SketchLine_344f-SketchLine_345f-SketchLine_346f-SketchLine_347f-SketchLine_348f-SketchLine_349f-SketchLine_350f-SketchLine_351f-SketchLine_352f-SketchLine_353f-SketchLine_354f-SketchLine_355f-SketchLine_356f-SketchLine_357f-SketchLine_358f-SketchLine_359f-SketchLine_360f-SketchLine_361f-SketchLine_362f-SketchLine_363f-SketchLine_364f-SketchLine_365f-SketchLine_366f-SketchLine_367f-SketchLine_368f-SketchLine_369f-SketchLine_370f-SketchLine_371f-SketchLine_372f-SketchLine_373f-SketchLine_374f-SketchLine_375f-SketchLine_376f-SketchLine_377f-SketchCircle_3_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_4_2f")], model.selection(), 30, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
index c0d1c6eb329bdf42a3bd1027ece543567293bbc9..c13b9d608f81bc03f353b7ea881d5d03675c07cc 100644 (file)
@@ -129,14 +129,14 @@ SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), Sket
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")])
 ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_5"))
 SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20)
 SketchLine_15.setName("SketchLine_19")
 SketchLine_15.result().setName("SketchLine_19")
 SketchLine_16 = Sketch_3.addLine(-20, 0, 0, 0)
 SketchLine_16.setName("SketchLine_15")
 SketchLine_16.result().setName("SketchLine_15")
-SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_11"))
+SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_6&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/Modfied_2"))
 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchPoint_2.result())
 SketchLine_17 = Sketch_3.addLine(0, 0, 0, -20)
 SketchLine_17.setName("SketchLine_16")
@@ -178,7 +178,7 @@ SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), Sk
 model.do()
 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")])
 RevolutionFuse_1.result().setName("RevolutionFuse_1_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_6"))
 SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20)
 SketchLine_22.setName("SketchLine_26")
 SketchLine_22.result().setName("SketchLine_26")
@@ -439,7 +439,7 @@ SketchLine_54.result().setName("SketchLine_55")
 SketchLine_54.setAuxiliary(True)
 SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint())
 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96")
-SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_10"))
+SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_12&RevolutionFuse_3_1/Modfied_15"))
 SketchLine_55.setName("SketchLine_56")
 SketchLine_55.result().setName("SketchLine_56")
 SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
@@ -656,7 +656,7 @@ Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20)
 SketchLine_77.setName("SketchLine_76")
 SketchLine_77.result().setName("SketchLine_76")
-SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_13&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_4"))
+SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_8&RevolutionFuse_2_1/Modfied_6&RevolutionFuse_3_1/Modfied_10&RevolutionFuse_3_1/Modfied_21"))
 SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result())
 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120")
 SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e"))
@@ -665,10 +665,10 @@ SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121")
 SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20)
 SketchLine_78.setName("SketchLine_77")
 SketchLine_78.result().setName("SketchLine_77")
-SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_9&RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_8"))
+SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_9&RevolutionFuse_1_1/Modfied_4&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_17"))
 SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result())
 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122")
-SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_2&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_1&RevolutionFuse_3_1/Modfied_17"))
+SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_11&RevolutionFuse_1_1/Modfied_9&ExtrusionFuse_2_1/Modfied_12&RevolutionFuse_3_1/Modfied_8"))
 SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result())
 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123")
 SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False)
@@ -691,7 +691,7 @@ SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoin
 SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127")
 SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result())
 SketchConstraintTangent_19.setName("SketchConstraintTangent_24")
-SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_8&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_9"))
+SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_16&RevolutionFuse_3_1/Modfied_17&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_2&RevolutionFuse_3_1/Modfied_1"))
 SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result())
 SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128")
 SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True)
@@ -702,7 +702,7 @@ SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoin
 SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129")
 SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result())
 SketchConstraintTangent_20.setName("SketchConstraintTangent_25")
-SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_4&RevolutionFuse_3_1/Modfied_24&RevolutionFuse_3_1/Modfied_5"))
+SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_20&RevolutionFuse_3_1/Modfied_21&ExtrusionCut_2_1/Modfied_2&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_1"))
 SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result())
 SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130")
 SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871)
index 66761864def3791c24259fab943e984a162b90fb..368df3b77d10c96c80931b4ab85891efcdb35e72 100644 (file)
@@ -147,7 +147,7 @@ SketchLine_14.result().setName("SketchLine_16")
 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_14.result())
 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_3.results()[1], 6)
-SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
 SketchLine_15.setName("SketchLine_17")
 SketchLine_15.result().setName("SketchLine_17")
 SketchConstraintDistance_8 = Sketch_2.setDistance(SketchArc_3.startPoint(), SketchLine_15.result(), 6)
@@ -182,12 +182,12 @@ SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_21.setName("SketchLine_23")
 SketchLine_21.result().setName("SketchLine_23")
 SketchLine_21.setAuxiliary(True)
-SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
 SketchLine_22.setName("SketchLine_24")
 SketchLine_22.result().setName("SketchLine_24")
 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
@@ -305,27 +305,27 @@ SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55")
 SketchConstraintMiddle_2 = Sketch_3.setMiddlePoint(SketchLine_34.result(), SketchPoint_4.coordinates())
 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_21.result())
 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_56")
-SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_35.setName("SketchLine_37")
 SketchLine_35.result().setName("SketchLine_37")
 SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_35.result())
 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_57")
 SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_24.result(), 31)
 SketchConstraintLength_10.setName("SketchConstraintLength_11")
-SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
 SketchLine_36.setName("SketchLine_38")
 SketchLine_36.result().setName("SketchLine_38")
 SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_36.result())
 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result())
 model.do()
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_37.setName("SketchLine_39")
 SketchLine_37.result().setName("SketchLine_39")
-SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_38.setName("SketchLine_40")
 SketchLine_38.result().setName("SketchLine_40")
 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_37.startPoint(), SketchLine_38.result())
@@ -373,7 +373,7 @@ SketchLine_41.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
 SketchPoint_5 = Sketch_5.addPoint(22.00014787857639, -7.5)
@@ -1088,7 +1088,7 @@ SketchLine_120.result().setName("SketchLine_16")
 SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result())
 SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_24")
 SketchConstraintRadius_13 = Sketch_12.setRadius(SketchArc_26.results()[1], 6)
-SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
 SketchLine_121.setName("SketchLine_17")
 SketchLine_121.result().setName("SketchLine_17")
 SketchConstraintDistance_25 = Sketch_12.setDistance(SketchArc_26.startPoint(), SketchLine_121.result(), 6)
@@ -1123,12 +1123,12 @@ SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_10.result().setName("ExtrusionCut_1_1")
-Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_127.setName("SketchLine_23")
 SketchLine_127.result().setName("SketchLine_23")
 SketchLine_127.setAuxiliary(True)
-SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
 SketchLine_128.setName("SketchLine_24")
 SketchLine_128.result().setName("SketchLine_24")
 SketchConstraintCoincidence_200 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result())
@@ -1246,27 +1246,27 @@ SketchConstraintCoincidence_224.setName("SketchConstraintCoincidence_55")
 SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates())
 SketchConstraintCoincidence_225 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result())
 SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_56")
-SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_141.setName("SketchLine_37")
 SketchLine_141.result().setName("SketchLine_37")
 SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result())
 SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_57")
 SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31)
 SketchConstraintLength_27.setName("SketchConstraintLength_11")
-SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
 SketchLine_142.setName("SketchLine_38")
 SketchLine_142.result().setName("SketchLine_38")
 SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result())
 SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result())
 model.do()
-ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_11.result().setName("ExtrusionCut_2_1")
 Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_143.setName("SketchLine_39")
 SketchLine_143.result().setName("SketchLine_39")
-SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_144.setName("SketchLine_40")
 SketchLine_144.result().setName("SketchLine_40")
 SketchConstraintCoincidence_228 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result())
@@ -1314,7 +1314,7 @@ SketchLine_147.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_12.result().setName("ExtrusionCut_3_1")
-Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
 SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
 SketchPoint_29 = Sketch_15.addPoint(22.00014787857639, -7.5)
index 5bd4027865556ebb7986cb883624c5c21129606c..8f5c6417c76764f524391ca60044cb8b6cf8655b 100644 (file)
@@ -118,9 +118,9 @@ model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
 Extrusion_1.setName("Profil")
 Extrusion_1.result().setName("Extrusion_1_1")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
-SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
+SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result())
 SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7)
 SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7)
@@ -150,25 +150,25 @@ SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10)
 SketchConstraintLength_5.setName("SketchConstraintLength_6")
 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299)
 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result())
-SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"))
 SketchPoint_2.setName("SketchPoint_4")
 SketchPoint_2.result().setName("SketchPoint_4")
 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates())
 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.setName("Decoupe_Angle")
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
 SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
 SketchLine_22.setName("SketchLine_29")
 SketchLine_22.result().setName("SketchLine_29")
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchPoint_3.setName("SketchPoint_5")
 SketchPoint_3.result().setName("SketchPoint_5")
 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result())
 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40")
-SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_23.setName("SketchLine_30")
 SketchLine_23.result().setName("SketchLine_30")
 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result())
@@ -207,16 +207,16 @@ Sketch_3.result().setName("Sketch_4")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.setName("Chamfrein_1")
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"))
 SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
 SketchLine_30.setName("SketchLine_35")
 SketchLine_30.result().setName("SketchLine_35")
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_6"))
 SketchPoint_4.setName("SketchPoint_6")
 SketchPoint_4.result().setName("SketchPoint_6")
 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result())
 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
-SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7"))
+SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5"))
 SketchLine_31.setName("SketchLine_36")
 SketchLine_31.result().setName("SketchLine_36")
 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
@@ -291,16 +291,16 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59")
 model.do()
 Sketch_4.setName("Sketch_5")
 Sketch_4.result().setName("Sketch_5")
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"))
 SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
 SketchLine_40.setName("SketchLine_58")
 SketchLine_40.result().setName("SketchLine_58")
 SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702)
 SketchLine_41.setName("SketchLine_57")
 SketchLine_41.result().setName("SketchLine_57")
-SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9"))
+SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_42.setName("SketchLine_46")
 SketchLine_42.result().setName("SketchLine_46")
 SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702)
index e0c52c036a2de0439c1d203770e253291185241b..065a84dbf35bdfd5599268b9730e6e39eef7fda6 100644 (file)
@@ -164,7 +164,7 @@ SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_84.result(), "2*R_fille
 SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_83.result(), "2*R_fillet")
 model.do()
 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0)
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1"))
 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519)
 SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ"))
@@ -196,7 +196,7 @@ SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinate
 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result())
 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
 model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
 RevolutionCut_1.result().setName("RevolutionCut_1_1")
index 92d8e891f89540de33fefe940a9d4f7ca6553cb0..e9a036f831b45550b4701d9a5437b72eb7b4712e 100644 (file)
@@ -72,26 +72,26 @@ SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], Sketch
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0)
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
+SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
 SketchLine_7.setName("SketchLine_8")
 SketchLine_7.result().setName("SketchLine_8")
 SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 SketchLine_8.setName("SketchLine_9")
 SketchLine_8.result().setName("SketchLine_9")
 SketchLine_8.setAuxiliary(True)
-SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
+SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
 SketchLine_9.setName("SketchLine_10")
 SketchLine_9.result().setName("SketchLine_10")
 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
+SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
 SketchLine_10.setName("SketchLine_11")
 SketchLine_10.result().setName("SketchLine_11")
 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
 SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
-SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
+SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
 SketchLine_11.setName("SketchLine_12")
 SketchLine_11.result().setName("SketchLine_12")
 SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
@@ -139,12 +139,12 @@ SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.999
 SketchLine_13.setName("SketchLine_14")
 SketchLine_13.result().setName("SketchLine_14")
 SketchLine_13.setAuxiliary(True)
-SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
+SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
 SketchLine_14.setName("SketchLine_15")
 SketchLine_14.result().setName("SketchLine_15")
 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
-SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_2_1/Modfied_2"))
+SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_2_1/Modfied_2"))
 SketchLine_15.setName("SketchLine_16")
 SketchLine_15.result().setName("SketchLine_16")
 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
@@ -153,7 +153,7 @@ SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 SketchLine_16.setName("SketchLine_17")
 SketchLine_16.result().setName("SketchLine_17")
 SketchLine_16.setAuxiliary(True)
-SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
 SketchLine_17.setName("SketchLine_18")
 SketchLine_17.result().setName("SketchLine_18")
 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
@@ -186,24 +186,24 @@ SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), Sketc
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5"))
-SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_19 = SketchProjection_1.createdFeature()
 SketchLine_19.setName("SketchLine_20")
 SketchLine_19.result().setName("SketchLine_20")
-SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
+SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
 SketchLine_20 = SketchProjection_2.createdFeature()
 SketchLine_20.setName("SketchLine_21")
 SketchLine_20.result().setName("SketchLine_21")
 SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
 SketchLine_21.setName("SketchLine_22")
 SketchLine_21.result().setName("SketchLine_22")
-SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"))
+SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"))
 SketchLine_22.setName("SketchLine_23")
 SketchLine_22.result().setName("SketchLine_23")
 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
-SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
 SketchLine_23.setName("SketchLine_24")
 SketchLine_23.result().setName("SketchLine_24")
 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
@@ -292,19 +292,19 @@ SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result())
 SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
 SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
 SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
-SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
+SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
 SketchLine_32.setName("SketchLine_33")
 SketchLine_32.result().setName("SketchLine_33")
 SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
-SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
+SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
 SketchLine_33.setName("SketchLine_34")
 SketchLine_33.result().setName("SketchLine_34")
 SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
-SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
+SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
 SketchLine_34.setName("SketchLine_35")
 SketchLine_34.result().setName("SketchLine_35")
 SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
-SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
+SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
 SketchLine_35.setName("SketchLine_36")
 SketchLine_35.result().setName("SketchLine_36")
 SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
@@ -430,29 +430,29 @@ SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42)
 SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
 SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
 SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
-SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
 SketchLine_46 = SketchProjection_3.createdFeature()
 SketchLine_46.setName("SketchLine_47")
 SketchLine_46.result().setName("SketchLine_47")
-SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_3"))
+SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_5"))
 SketchLine_47 = SketchProjection_4.createdFeature()
 SketchLine_47.setName("SketchLine_48")
 SketchLine_47.result().setName("SketchLine_48")
-SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
 SketchLine_48 = SketchProjection_5.createdFeature()
 SketchLine_48.setName("SketchLine_49")
 SketchLine_48.result().setName("SketchLine_49")
 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
 SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
 model.do()
-ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
 ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
 SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
 SketchLine_49.setName("SketchLine_50")
 SketchLine_49.result().setName("SketchLine_50")
 SketchLine_49.setAuxiliary(True)
-SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4"))
 SketchLine_50.setName("SketchLine_51")
 SketchLine_50.result().setName("SketchLine_51")
 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
@@ -465,12 +465,12 @@ SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656
 SketchLine_51.setName("SketchLine_52")
 SketchLine_51.result().setName("SketchLine_52")
 SketchLine_51.setAuxiliary(True)
-SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4"))
 SketchLine_52.setName("SketchLine_53")
 SketchLine_52.result().setName("SketchLine_53")
 SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
-SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
 SketchLine_53.setName("SketchLine_54")
 SketchLine_53.result().setName("SketchLine_54")
 SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
@@ -492,7 +492,7 @@ SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Ed
 SketchLine_54 = SketchProjection_6.createdFeature()
 SketchLine_54.setName("SketchLine_55")
 SketchLine_54.result().setName("SketchLine_55")
-SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4"))
 SketchLine_55 = SketchProjection_7.createdFeature()
 SketchLine_55.setName("SketchLine_56")
 SketchLine_55.result().setName("SketchLine_56")
@@ -517,11 +517,11 @@ SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), Sket
 SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
 SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
-SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4"))
 SketchLine_58 = SketchProjection_8.createdFeature()
 SketchLine_58.setName("SketchLine_59")
 SketchLine_58.result().setName("SketchLine_59")
-SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
+SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
 SketchLine_59 = SketchProjection_9.createdFeature()
 SketchLine_59.setName("SketchLine_60")
 SketchLine_59.result().setName("SketchLine_60")
index 7af290633ca584f0a6b72d0f458d2553a4177c17..969bfacd3aa66644f548a112c670f865715b94d6 100644 (file)
@@ -149,11 +149,11 @@ SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.result(), SketchA
 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_10.result(), "d1*coeff")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_7r-SketchLine_8r-SketchArc_5_2r-SketchLine_9r-SketchArc_6_2f-SketchLine_10r-SketchArc_7_2f-SketchLine_11r-SketchArc_8_2r-SketchLine_12r-SketchLine_13r")], model.selection(), "epaisseur_plat*coeff", 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d2*coeff", True)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d2*coeff", True)
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/Generated_Face_13"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), False)
 SketchLine_14 = SketchProjection_1.createdFeature()
-SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/To_Face_1"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/To_Face_1"), False)
 SketchLine_15 = SketchProjection_2.createdFeature()
 SketchLine_16 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -31.24999999999999, -35.00000000000001)
 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_16.startPoint())
@@ -215,9 +215,9 @@ SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), Sk
 #SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_17.startPoint(), SketchLine_23.result(), "(e3-epaisseur_plat)*coeff")
 model.do()
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0)
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_9"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_3"))
 SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001)
-SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_9&Extrusion_2_1/To_Face_1"))
+SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
 #SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_25.result())
 SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001)
 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint())
@@ -245,9 +245,9 @@ SketchConstraintVertical_12 = Sketch_3.setVertical(SketchLine_27.result())
 SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_33.result())
 SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_31.result())
 SketchConstraintAngle_1 = Sketch_3.setAngleComplementary(SketchLine_26.result(), SketchLine_24.result(), "angle")
-SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_8&Extrusion_2_1/Generated_Face_7"))
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/Generated_Face_4"))
 SketchLine_34 = SketchProjection_3.createdFeature()
-SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_11&Extrusion_2_1/Generated_Face_10"))
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_2&Extrusion_2_1/Generated_Face_1"))
 SketchLine_35 = SketchProjection_4.createdFeature()
 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_34.result())
 SketchConstraintDistance_15 = Sketch_3.setDistance(SketchLine_31.result(), SketchLine_33.endPoint(), "(d6-d5)*coeff")
@@ -263,13 +263,13 @@ ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Ske
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d3*coeff", True)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), "d3*coeff", True)
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
-SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_16&Extrusion_1_1/To_Face_1"))
+SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/To_Face_1"))
 SketchLine_36 = SketchProjection_5.createdFeature()
 SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_8&ExtrusionCut_2_1/Modfied_9"))
 SketchLine_37 = SketchProjection_6.createdFeature()
-SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_15&Extrusion_1_1/Generated_Face_14"))
+SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"))
 SketchLine_38 = SketchProjection_7.createdFeature()
 SketchLine_39 = Sketch_4.addLine(-25, -35.00000000000001, -31.24999999999999, -35.00000000000001)
 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_39.startPoint())
@@ -305,23 +305,23 @@ SketchConstraintDistance_19 = Sketch_4.setDistance(SketchLine_41.endPoint(), Ske
 SketchConstraintDistance_20 = Sketch_4.setDistance(SketchLine_41.startPoint(), SketchLine_39.result(), "h2")
 model.do()
 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_39r-SketchArc_13_2f-SketchLine_40r-SketchLine_41r-SketchLine_42r-SketchArc_14_2r-SketchLine_43r-SketchLine_44f")], model.selection(), 0, "e1*coeff")
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
 SketchCircle_1 = Sketch_5.addCircle(70, 17.5, 3.125)
-SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5"))
+SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_4"))
 SketchConstraintDistance_21 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_45.result(), "d9*coeff")
-SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11"))
 SketchLine_46 = SketchProjection_8.createdFeature()
-SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1"))
 SketchLine_47 = SketchProjection_9.createdFeature()
 SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_47.result(), "d1*coeff")
 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou")
 model.do()
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14"))
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_6"))
 SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5)
-SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1"))
-SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_19&Extrusion_1_1/Generated_Face_18"))
+SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
+SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"))
 SketchLine_49 = SketchProjection_10.createdFeature()
 SketchConstraintDistance_23 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_49.result(), "d1*coeff")
 SketchConstraintDistance_23.setName("SketchConstraintDistance_24")
@@ -330,15 +330,15 @@ SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLi
 SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_50.result(), "d_trou")
 SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
 model.do()
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_16"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"))
 SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048)
 SketchLine_51.setAuxiliary(True)
-SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/Generated_Face_11"))
 SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
 SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_52.result())
-SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_12"))
 SketchArc_15 = Sketch_7.addArc(102.5, 7.22841614740048, 110, 7.22841614740048, 104.5, 0, True)
 SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchArc_15.startPoint())
 SketchConstraintTangent_29 = Sketch_7.setTangent(SketchLine_51.result(), SketchArc_15.results()[1])
@@ -355,11 +355,11 @@ SketchConstraintLength_5 = Sketch_7.setLength(SketchLine_54.result(), "5.5*coeff
 SketchLine_56 = Sketch_7.addLine(110, 12.5, 0, 12.5)
 SketchLine_56.setAuxiliary(True)
 SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchLine_56.startPoint(), SketchLine_52.result())
-SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_1"))
 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.result())
 SketchConstraintMiddle_1 = Sketch_7.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_57.result())
 SketchConstraintMiddle_2 = Sketch_7.setMiddlePoint(SketchLine_56.startPoint(), SketchLine_52.result())
-SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_1"))
+SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_2"))
 SketchLine_58 = SketchProjection_11.createdFeature()
 SketchLine_59 = Sketch_7.addLine(55.00000000000002, 0, 55.00000000000002, 25)
 SketchLine_59.setAuxiliary(True)
index 871763ffc462cff2e9e3bc7a9c24405060b9d6fd..f4159d38f069bd1a5ea1572e64cc53f86ceeef3a 100644 (file)
@@ -354,7 +354,7 @@ ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False)
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True)
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
-SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"))
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1"))
 SketchLine_18 = SketchProjection_3.createdFeature()
 SketchLine_18.setName("SketchLine_4")
 SketchLine_18.result().setName("SketchLine_4")
@@ -435,7 +435,7 @@ SketchConstraintDistance_13.setName("SketchConstraintDistance_11")
 SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff")
 SketchConstraintDistance_14.setName("SketchConstraintDistance_12")
 model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
 Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
 Boolean_1.result().setName("Boolean_1_1")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")])
@@ -526,7 +526,7 @@ SketchConstraintDistance_16.setName("SketchConstraintDistance_10")
 SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145)
 SketchConstraintLength_10.setName("SketchConstraintLength_7")
 model.do()
-Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
 Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
 Boolean_2.result().setName("Boolean_2_1")
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")])
@@ -635,12 +635,12 @@ SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*co
 SketchConstraintRadius_13.setName("SketchConstraintRadius_10")
 model.do()
 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0)
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_3"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_1"))
 SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15)
 SketchLine_46.setName("SketchLine_38")
 SketchLine_46.result().setName("SketchLine_38")
 SketchLine_46.setAuxiliary(True)
-SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_3&Extrusion_6_1/To_Face_1"))
+SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_1&Extrusion_6_1/To_Face_1"))
 SketchLine_47.setName("SketchLine_39")
 SketchLine_47.result().setName("SketchLine_39")
 SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result())
@@ -677,19 +677,19 @@ model.do()
 ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
 ExtrusionCut_9.result().setName("ExtrusionCut_9_1")
 ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_2"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_1"))
 SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14)
 SketchLine_50.setName("SketchLine_56")
 SketchLine_50.result().setName("SketchLine_56")
 SketchLine_50.setAuxiliary(True)
-SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_2&Extrusion_6_1/To_Face_1"))
+SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_1&Extrusion_6_1/To_Face_1"))
 SketchLine_51.setName("SketchLine_57")
 SketchLine_51.result().setName("SketchLine_57")
 SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result())
 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81")
 SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result())
 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82")
-SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_2"))
+SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_1"))
 SketchLine_52.setName("SketchLine_58")
 SketchLine_52.result().setName("SketchLine_58")
 SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True)
@@ -733,19 +733,19 @@ SketchArc_22.result().setName("SketchArc_24")
 SketchArc_22.results()[1].setName("SketchArc_24_2")
 model.do()
 ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")])
-Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_3"))
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_1"))
 SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699)
 SketchLine_58.setName("SketchLine_64")
 SketchLine_58.result().setName("SketchLine_64")
 SketchLine_58.setAuxiliary(True)
-SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/Generated_Face_2"))
+SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/Generated_Face_2"))
 SketchLine_59.setName("SketchLine_65")
 SketchLine_59.result().setName("SketchLine_65")
 SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89")
 SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result())
 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90")
-SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/From_Face_1"))
+SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/From_Face_1"))
 SketchLine_60.setName("SketchLine_66")
 SketchLine_60.result().setName("SketchLine_66")
 SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False)