--- /dev/null
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(0, 0, 30, 0)
+SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "Origin"))
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
+SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "OX"))
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(30, 0, 30, 37.5)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(30, 37.5, 17, 37.5)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(17, 37.5, 17, 15.5)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(17, 15.5, 0, 15.5)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "OY"))
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
+SketchLine_8 = Sketch_1.addLine(0, 15.5, 0, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.endPoint(), SketchLine_8.result(), 30)
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 37.5)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_8.result(), 15.5)
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.coordinates())
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_4.result(), 13)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_1.startPoint())
+model.do()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchLine_9 = Sketch_2.addLine(0, 0, 0, 45.59203984275747)
+SketchLine_9.setAuxiliary(True)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_9.startPoint())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
+SketchLine_10 = Sketch_2.addLine(-2.5, 37.41657386773942, -0.9611800001338426, 34.11656372860793)
+SketchArc_1 = Sketch_2.addArc(0, 34.39248583236681, -0.9611800001338426, 34.11656372860793, 0.9611800001338454, 34.11656372860793, False)
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_1.center(), SketchLine_9.result())
+SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_9.result(), [SketchLine_10.result()])
+[SketchLine_11] = SketchConstraintMirror_1.mirrored()
+SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_9.result(), 204.9999999999999)
+SketchConstraintRadius_1 = Sketch_2.setRadius(SketchArc_1.results()[1], 1)
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_9.result(), 2.5)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchAPI_Line(SketchLine_11).endPoint())
+SketchArc_2 = Sketch_2.addArc(0, 0, -2.5, 37.41657386773942, 2.5, 37.41657386773942, True)
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_2.center(), SketchPoint_2.result())
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchArc_2.startPoint())
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_11).startPoint(), SketchArc_2.endPoint())
+SketchMultiRotation_1_objects = [SketchArc_1.results()[1], SketchLine_10.result(), SketchArc_2.results()[1], SketchLine_11.result()]
+SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchArc_2.center(), 12, 30)
+[SketchArc_3, SketchArc_4, SketchArc_5, SketchArc_6, SketchArc_7, SketchArc_8, SketchArc_9, SketchArc_10, SketchArc_11, SketchArc_12, SketchArc_13, SketchArc_14, SketchArc_15, SketchArc_16, SketchArc_17, SketchArc_18, SketchArc_19, SketchArc_20, SketchArc_21, SketchArc_22, SketchArc_23, SketchArc_24, SketchArc_25, SketchArc_26, SketchArc_27, SketchArc_28, SketchArc_29, SketchArc_30, SketchArc_31, SketchLine_12, SketchLine_13, SketchLine_14, SketchLine_15, SketchLine_16, SketchLine_17, SketchLine_18, SketchLine_19, SketchLine_20, SketchLine_21, SketchLine_22, SketchLine_23, SketchLine_24, SketchLine_25, SketchLine_26, SketchLine_27, SketchLine_28, SketchLine_29, SketchLine_30, SketchLine_31, SketchLine_32, SketchLine_33, SketchLine_34, SketchLine_35, SketchLine_36, SketchLine_37, SketchLine_38, SketchLine_39, SketchLine_40, SketchArc_32, SketchArc_33, SketchArc_34, SketchArc_35, SketchArc_36, SketchArc_37, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_41, SketchArc_42, SketchArc_43, SketchArc_44, SketchArc_45, SketchArc_46, SketchArc_47, SketchArc_48, SketchArc_49, SketchArc_50, SketchArc_51, SketchArc_52, SketchArc_53, SketchArc_54, SketchArc_55, SketchArc_56, SketchArc_57, SketchArc_58, SketchArc_59, SketchArc_60, SketchLine_11, SketchLine_41, SketchLine_42, SketchLine_43, SketchLine_44, SketchLine_45, SketchLine_46, SketchLine_47, SketchLine_48, SketchLine_49, SketchLine_50, SketchLine_51, SketchLine_52, SketchLine_53, SketchLine_54, SketchLine_55, SketchLine_56, SketchLine_57, SketchLine_58, SketchLine_59, SketchLine_60, SketchLine_61, SketchLine_62, SketchLine_63, SketchLine_64, SketchLine_65, SketchLine_66, SketchLine_67, SketchLine_68, SketchLine_69] = SketchMultiRotation_1.rotated()
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 37.5)
+model.do()
+Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_70 = Sketch_3.addLine(0, 0, 30, 0)
+SketchLine_70.setAuxiliary(True)
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_70.startPoint(), SketchPoint_3.result())
+SketchLine_71 = Sketch_3.addLine(30, 0, 30, 37.5)
+SketchLine_71.setAuxiliary(True)
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
+SketchLine_72 = Sketch_3.addLine(30, 37.5, 17, 37.5)
+SketchLine_72.setAuxiliary(True)
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
+SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_72.result())
+SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_70.result())
+SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_71.result())
+SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_70.result(), 30)
+SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_71.result(), 37.5)
+SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_72.result(), 13)
+SketchLine_73 = Sketch_3.addLine(29, 37.49999999999999, 30, 36.49999999999999)
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_72.result())
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_71.result())
+SketchLine_74 = Sketch_3.addLine(17, 37.5, 17, 36.5)
+SketchLine_75 = Sketch_3.addLine(17, 36.5, 17.99999999999994, 37.5)
+SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
+SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_72.result())
+SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_74.startPoint())
+SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_74.result())
+SketchConstraintLength_7 = Sketch_3.setLength(SketchLine_74.result(), 1)
+SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_75.endPoint(), SketchLine_74.result(), 1)
+SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_73.startPoint(), SketchLine_71.result(), 1)
+SketchConstraintDistance_5 = Sketch_3.setDistance(SketchLine_73.endPoint(), SketchLine_72.result(), 1)
+SketchLine_76 = Sketch_3.addLine(17, 37.5, 17.99999999999994, 37.5)
+SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_76.startPoint())
+SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_74.startPoint(), SketchLine_76.startPoint())
+SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_76.endPoint())
+SketchLine_77 = Sketch_3.addLine(29, 37.49999999999999, 30, 37.5)
+SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_77.startPoint())
+SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_77.endPoint())
+SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_77.endPoint())
+SketchLine_78 = Sketch_3.addLine(30, 37.5, 30, 36.49999999999999)
+SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_34 = Sketch_3.setCoincident(SketchLine_77.endPoint(), SketchLine_78.startPoint())
+SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_78.endPoint())
+SketchLine_79 = Sketch_3.addLine(0, 0, 0, 15)
+SketchLine_79.setAuxiliary(True)
+SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_79.startPoint(), SketchPoint_3.result())
+SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_79.result())
+SketchConstraintLength_8 = Sketch_3.setLength(SketchLine_79.result(), 15)
+SketchLine_80 = Sketch_3.addLine(0, 15, 0.5, 15)
+SketchLine_80.setAuxiliary(True)
+SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_80.startPoint())
+SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_80.result())
+SketchArc_61 = Sketch_3.addArc(0.5, 15, 0, 15, 0.4999999999999999, 15.5, True)
+SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchArc_61.center())
+SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchArc_61.startPoint())
+SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchArc_61.startPoint())
+SketchLine_81 = Sketch_3.addLine(0.5, 15, 0.5, 15.66051714754979)
+SketchLine_81.setAuxiliary(True)
+SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchLine_81.startPoint())
+SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchArc_61.center(), SketchLine_81.startPoint())
+SketchConstraintVertical_8 = Sketch_3.setVertical(SketchLine_81.result())
+SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_81.result())
+SketchConstraintRadius_3 = Sketch_3.setRadius(SketchArc_61.results()[1], 0.5)
+SketchLine_82 = Sketch_3.addLine(0.4999999999999999, 15.5, 0.4988301186899768, 15.74914940994379)
+SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_82.startPoint())
+SketchLine_83 = Sketch_3.addLine(0.4988301186899768, 15.74914940994379, -0.3081878496471824, 15.75231418629021)
+SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchLine_82.endPoint(), SketchLine_83.startPoint())
+SketchLine_84 = Sketch_3.addLine(-0.3081878496471824, 15.75231418629021, -0.3081878496471824, 14.99276786314936)
+SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchLine_83.endPoint(), SketchLine_84.startPoint())
+SketchLine_85 = Sketch_3.addLine(-0.3081878496471824, 14.99276786314936, 0, 15)
+SketchConstraintCoincidence_47 = Sketch_3.setCoincident(SketchLine_84.endPoint(), SketchLine_85.startPoint())
+SketchConstraintCoincidence_48 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_85.endPoint())
+SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchLine_85.endPoint())
+SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchArc_61.startPoint(), SketchLine_85.endPoint())
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0)
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
+SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519)
+SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ"))
+SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_86.startPoint(), SketchLine_87.result())
+SketchLine_88 = Sketch_4.addLine(3.1, -13.49999999999519, 3.1, -10.55414610473955)
+SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_86.endPoint(), SketchLine_88.startPoint())
+SketchLine_89 = Sketch_4.addLine(0, -10.5290802744499, 0, 12.80434395246332)
+SketchLine_89.setAuxiliary(True)
+SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_89.startPoint(), SketchLine_87.result())
+SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_89.result())
+SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_86.result())
+SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_88.result())
+SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_86.result(), 3.1)
+SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_87.result(), [SketchLine_86.result(), SketchLine_88.result()])
+[SketchLine_90, SketchLine_91] = SketchConstraintMirror_2.mirrored()
+SketchArc_62 = Sketch_4.addArc(0, 0, 3.1, -10.55414610473955, -3.100000000000001, -10.55414610473344, False)
+SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchArc_62.center())
+SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_87.startPoint(), SketchArc_62.center())
+SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchLine_88.result())
+SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchArc_62.endPoint(), SketchLine_91.result())
+SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_62.results()[1], 11)
+SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchArc_62.startPoint())
+SketchPoint_5 = Sketch_4.addPoint(3.1, -10.55414610473955)
+SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchPoint_5.coordinates())
+SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchPoint_5.coordinates())
+SketchPoint_6 = Sketch_4.addPoint(0, 11.00000000000481)
+SketchPoint_6.setAuxiliary(True)
+SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchArc_62.results()[1])
+SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result())
+SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
+model.do()
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
+RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
+model.do()
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(RevolutionCut_1, 1)
+model.testNbSubResults(RevolutionCut_1, [0])
+model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.FACE, [188])
+model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.EDGE, [1104])
+model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.VERTEX, [2208])
+model.testResultsVolumes(RevolutionCut_1, [65202.414301669727137777954339981])
+
+assert(model.checkPythonDump())
