virtual ~ConstructionAPI_Point();
INTERFACE_25(ConstructionPlugin_Point::ID(),
- point, ConstructionPlugin_Point::point3d(), GeomDataAPI_Point, /** Point attribute */,
- creationMethod, ConstructionPlugin_Point::CREATION_METHOD(),
- ModelAPI_AttributeString, /** Creation method */,
- intersectionType, ConstructionPlugin_Point::INTERSECTION_TYPE(),
- ModelAPI_AttributeString, /** Type of the intersection */,
- intersectionLine1, ConstructionPlugin_Point::INTERSECTION_LINE_1(),
- ModelAPI_AttributeSelection, /** Line for intersection */,
- intersectionLine2, ConstructionPlugin_Point::INTERSECTION_LINE_2(),
- ModelAPI_AttributeSelection, /** Line for intersection */,
- intersectionLine, ConstructionPlugin_Point::INTERSECTION_LINE(),
- ModelAPI_AttributeSelection, /** Line for intersection */,
- intersectionPlane, ConstructionPlugin_Point::INTERSECTION_PLANE(),
- ModelAPI_AttributeSelection, /** Plane for intersection */,
- intersectionPlane1, ConstructionPlugin_Point::INTERSECTION_PLANE_1(),
- ModelAPI_AttributeSelection, /** Plane for intersection */,
- intersectionPlane2, ConstructionPlugin_Point::INTERSECTION_PLANE_2(),
- ModelAPI_AttributeSelection, /** Plane for intersection */,
- intersectionPlane3, ConstructionPlugin_Point::INTERSECTION_PLANE_3(),
- ModelAPI_AttributeSelection, /** Plane for intersection */,
- useOffset, ConstructionPlugin_Point::USE_OFFSET(),
- ModelAPI_AttributeString, /** Use offset */,
- offset, ConstructionPlugin_Point::OFFSET(),
- ModelAPI_AttributeDouble, /** Offset */,
- reverseOffset, ConstructionPlugin_Point::REVERSE_OFFSET(),
- ModelAPI_AttributeBoolean, /** Reverse offset */,
- edge, ConstructionPlugin_Point::EDGE(),
- ModelAPI_AttributeSelection, /** Edge */,
- offsetType, ConstructionPlugin_Point::OFFSET_TYPE(),
- ModelAPI_AttributeString, /** Type of the offset on edge */,
- distance, ConstructionPlugin_Point::DISTANCE(),
- ModelAPI_AttributeDouble, /** Distance */,
- ratio, ConstructionPlugin_Point::RATIO(),
- ModelAPI_AttributeDouble, /** Ratio */,
- reverse, ConstructionPlugin_Point::REVERSE(),
- ModelAPI_AttributeBoolean, /** Reverse */,
- poinToProject, ConstructionPlugin_Point::POINT_TO_PROJECT(),
- ModelAPI_AttributeSelection, /** Point to project*/,
- projectionType, ConstructionPlugin_Point::PROJECTION_TYPE(),
- ModelAPI_AttributeString, /** Type of the point projection */,
- faceForPointProjection, ConstructionPlugin_Point::FACE_FOR_POINT_PROJECTION(),
- ModelAPI_AttributeSelection, /** Face for point projection */,
- edgeForPointProjection, ConstructionPlugin_Point::EDGE_FOR_POINT_PROJECTION(),
- ModelAPI_AttributeSelection, /** Edge for point projection */,
- geometricalPropertyType, ConstructionPlugin_Point::GEOMETRICAL_PROPERTY_TYPE(),
- ModelAPI_AttributeString, /** Type of the geometrical property */,
- objectForCenterOfGravity, ConstructionPlugin_Point::OBJECT_FOR_CENTER_OF_GRAVITY(),
- ModelAPI_AttributeSelection, /** Object for center of gravity */,
- objectForCenterOfCircle, ConstructionPlugin_Point::OBJECT_FOR_CENTER_OF_CIRCLE(),
- ModelAPI_AttributeSelection, /** Object for center of circle */)
+ point, ConstructionPlugin_Point::point3d(), GeomDataAPI_Point, /** Point attribute */,
+ creationMethod, ConstructionPlugin_Point::CREATION_METHOD(), ModelAPI_AttributeString, /** Creation method */,
+ intersectionType, ConstructionPlugin_Point::INTERSECTION_TYPE(), ModelAPI_AttributeString, /** Type of the intersection */,
+ intersectionLine1, ConstructionPlugin_Point::INTERSECTION_LINE_1(), ModelAPI_AttributeSelection, /** Line for intersection */,
+ intersectionLine2, ConstructionPlugin_Point::INTERSECTION_LINE_2(), ModelAPI_AttributeSelection, /** Line for intersection */,
+ intersectionLine, ConstructionPlugin_Point::INTERSECTION_LINE(), ModelAPI_AttributeSelection, /** Line for intersection */,
+ intersectionPlane, ConstructionPlugin_Point::INTERSECTION_PLANE(), ModelAPI_AttributeSelection, /** Plane for intersection */,
+ intersectionPlane1, ConstructionPlugin_Point::INTERSECTION_PLANE_1(), ModelAPI_AttributeSelection, /** Plane for intersection */,
+ intersectionPlane2, ConstructionPlugin_Point::INTERSECTION_PLANE_2(), ModelAPI_AttributeSelection, /** Plane for intersection */,
+ intersectionPlane3, ConstructionPlugin_Point::INTERSECTION_PLANE_3(), ModelAPI_AttributeSelection, /** Plane for intersection */,
+ useOffset, ConstructionPlugin_Point::USE_OFFSET(), ModelAPI_AttributeString, /** Use offset */,
+ offset, ConstructionPlugin_Point::OFFSET(), ModelAPI_AttributeDouble, /** Offset */,
+ reverseOffset, ConstructionPlugin_Point::REVERSE_OFFSET(), ModelAPI_AttributeBoolean, /** Reverse offset */,
+ edge, ConstructionPlugin_Point::EDGE(), ModelAPI_AttributeSelection, /** Edge */,
+ offsetType, ConstructionPlugin_Point::OFFSET_TYPE(), ModelAPI_AttributeString, /** Type of the offset on edge */,
+ distance, ConstructionPlugin_Point::DISTANCE(), ModelAPI_AttributeDouble, /** Distance */,
+ ratio, ConstructionPlugin_Point::RATIO(), ModelAPI_AttributeDouble, /** Ratio */,
+ reverse, ConstructionPlugin_Point::REVERSE(), ModelAPI_AttributeBoolean, /** Reverse */,
+ poinToProject, ConstructionPlugin_Point::POINT_TO_PROJECT(), ModelAPI_AttributeSelection, /** Point to project*/,
+ projectionType, ConstructionPlugin_Point::PROJECTION_TYPE(), ModelAPI_AttributeString, /** Type of the point projection */,
+ faceForPointProjection, ConstructionPlugin_Point::FACE_FOR_POINT_PROJECTION(), ModelAPI_AttributeSelection, /** Face for point projection */,
+ edgeForPointProjection, ConstructionPlugin_Point::EDGE_FOR_POINT_PROJECTION(), ModelAPI_AttributeSelection, /** Edge for point projection */,
+ geometricalPropertyType, ConstructionPlugin_Point::GEOMETRICAL_PROPERTY_TYPE(), ModelAPI_AttributeString, /** Type of the geometrical property */,
+ objectForCenterOfGravity, ConstructionPlugin_Point::OBJECT_FOR_CENTER_OF_GRAVITY(), ModelAPI_AttributeSelection, /** Object for center of gravity */,
+ objectForCenterOfCircle, ConstructionPlugin_Point::OBJECT_FOR_CENTER_OF_CIRCLE(), ModelAPI_AttributeSelection, /** Object for center of circle */)
/// Set point values.
CONSTRUCTIONAPI_EXPORT
END_INIT() \
public:
+//--------------------------------------------------------------------------------------
+#define INTERFACE_25(KIND, \
+ N_0, AN_0, T_0, C_0, \
+ N_1, AN_1, T_1, C_1, \
+ N_2, AN_2, T_2, C_2, \
+ N_3, AN_3, T_3, C_3, \
+ N_4, AN_4, T_4, C_4, \
+ N_5, AN_5, T_5, C_5, \
+ N_6, AN_6, T_6, C_6, \
+ N_7, AN_7, T_7, C_7, \
+ N_8, AN_8, T_8, C_8, \
+ N_9, AN_9, T_9, C_9, \
+ N_10, AN_10, T_10, C_10, \
+ N_11, AN_11, T_11, C_11, \
+ N_12, AN_12, T_12, C_12, \
+ N_13, AN_13, T_13, C_13, \
+ N_14, AN_14, T_14, C_14, \
+ N_15, AN_15, T_15, C_15, \
+ N_16, AN_16, T_16, C_16, \
+ N_17, AN_17, T_17, C_17, \
+ N_18, AN_18, T_18, C_18, \
+ N_19, AN_19, T_19, C_19, \
+ N_20, AN_20, T_20, C_20, \
+ N_21, AN_21, T_21, C_21, \
+ N_22, AN_22, T_22, C_22, \
+ N_23, AN_23, T_23, C_23, \
+ N_24, AN_24, T_24, C_24) \
+ public: \
+ INTERFACE_COMMON(KIND) \
+ DEFINE_ATTRIBUTE(N_0, T_0, C_0) \
+ DEFINE_ATTRIBUTE(N_1, T_1, C_1) \
+ DEFINE_ATTRIBUTE(N_2, T_2, C_2) \
+ DEFINE_ATTRIBUTE(N_3, T_3, C_3) \
+ DEFINE_ATTRIBUTE(N_4, T_4, C_4) \
+ DEFINE_ATTRIBUTE(N_5, T_5, C_5) \
+ DEFINE_ATTRIBUTE(N_6, T_6, C_6) \
+ DEFINE_ATTRIBUTE(N_7, T_7, C_7) \
+ DEFINE_ATTRIBUTE(N_8, T_8, C_8) \
+ DEFINE_ATTRIBUTE(N_9, T_9, C_9) \
+ DEFINE_ATTRIBUTE(N_10, T_10, C_10) \
+ DEFINE_ATTRIBUTE(N_11, T_11, C_11) \
+ DEFINE_ATTRIBUTE(N_12, T_12, C_12) \
+ DEFINE_ATTRIBUTE(N_13, T_13, C_13) \
+ DEFINE_ATTRIBUTE(N_14, T_14, C_14) \
+ DEFINE_ATTRIBUTE(N_15, T_15, C_15) \
+ DEFINE_ATTRIBUTE(N_16, T_16, C_16) \
+ DEFINE_ATTRIBUTE(N_17, T_17, C_17) \
+ DEFINE_ATTRIBUTE(N_18, T_18, C_18) \
+ DEFINE_ATTRIBUTE(N_19, T_19, C_19) \
+ DEFINE_ATTRIBUTE(N_20, T_20, C_20) \
+ DEFINE_ATTRIBUTE(N_21, T_21, C_21) \
+ DEFINE_ATTRIBUTE(N_22, T_22, C_22) \
+ DEFINE_ATTRIBUTE(N_23, T_23, C_23) \
+ DEFINE_ATTRIBUTE(N_24, T_24, C_24) \
+ protected: \
+ START_INIT() \
+ SET_ATTRIBUTE(N_0, T_0, AN_0) \
+ SET_ATTRIBUTE(N_1, T_1, AN_1) \
+ SET_ATTRIBUTE(N_2, T_2, AN_2) \
+ SET_ATTRIBUTE(N_3, T_3, AN_3) \
+ SET_ATTRIBUTE(N_4, T_4, AN_4) \
+ SET_ATTRIBUTE(N_5, T_5, AN_5) \
+ SET_ATTRIBUTE(N_6, T_6, AN_6) \
+ SET_ATTRIBUTE(N_7, T_7, AN_7) \
+ SET_ATTRIBUTE(N_8, T_8, AN_8) \
+ SET_ATTRIBUTE(N_9, T_9, AN_9) \
+ SET_ATTRIBUTE(N_10, T_10, AN_10) \
+ SET_ATTRIBUTE(N_11, T_11, AN_11) \
+ SET_ATTRIBUTE(N_12, T_12, AN_12) \
+ SET_ATTRIBUTE(N_13, T_13, AN_13) \
+ SET_ATTRIBUTE(N_14, T_14, AN_14) \
+ SET_ATTRIBUTE(N_15, T_15, AN_15) \
+ SET_ATTRIBUTE(N_16, T_16, AN_16) \
+ SET_ATTRIBUTE(N_17, T_17, AN_17) \
+ SET_ATTRIBUTE(N_18, T_18, AN_18) \
+ SET_ATTRIBUTE(N_19, T_19, AN_19) \
+ SET_ATTRIBUTE(N_20, T_20, AN_20) \
+ SET_ATTRIBUTE(N_21, T_21, AN_21) \
+ SET_ATTRIBUTE(N_22, T_22, AN_22) \
+ SET_ATTRIBUTE(N_23, T_23, AN_23) \
+ SET_ATTRIBUTE(N_24, T_24, AN_24) \
+ END_INIT() \
+ public:
+
+
//--------------------------------------------------------------------------------------
#define INTERFACE_27(KIND, \
N_0, AN_0, T_0, C_0, \
