Issue #2299: Wrong face support of sketch in script from python dump

[modules/shaper.git] / test.models / ecran.py

diff --git a/test.models/ecran.py b/test.models/ecran.py
index 5bd4027865556ebb7986cb883624c5c21129606c..8f5c6417c76764f524391ca60044cb8b6cf8655b 100644 (file)
--- a/test.models/ecran.py
+++ b/test.models/ecran.py
@@ -118,9 +118,9 @@ model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
 Extrusion_1.setName("Profil")
 Extrusion_1.result().setName("Extrusion_1_1")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
-SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
+SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result())
 SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7)
 SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7)
@@ -150,25 +150,25 @@ SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10)
 SketchConstraintLength_5.setName("SketchConstraintLength_6")
 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299)
 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result())
-SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"))
 SketchPoint_2.setName("SketchPoint_4")
 SketchPoint_2.result().setName("SketchPoint_4")
 SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates())
 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.setName("Decoupe_Angle")
 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
 SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
 SketchLine_22.setName("SketchLine_29")
 SketchLine_22.result().setName("SketchLine_29")
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchPoint_3.setName("SketchPoint_5")
 SketchPoint_3.result().setName("SketchPoint_5")
 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result())
 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40")
-SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_23.setName("SketchLine_30")
 SketchLine_23.result().setName("SketchLine_30")
 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result())
@@ -207,16 +207,16 @@ Sketch_3.result().setName("Sketch_4")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.setName("Chamfrein_1")
 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"))
 SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
 SketchLine_30.setName("SketchLine_35")
 SketchLine_30.result().setName("SketchLine_35")
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5&ExtrusionCut_1_1/Modfied_6"))
 SketchPoint_4.setName("SketchPoint_6")
 SketchPoint_4.result().setName("SketchPoint_6")
 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result())
 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
-SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7"))
+SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_5"))
 SketchLine_31.setName("SketchLine_36")
 SketchLine_31.result().setName("SketchLine_36")
 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
@@ -291,16 +291,16 @@ SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59")
 model.do()
 Sketch_4.setName("Sketch_5")
 Sketch_4.result().setName("Sketch_5")
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"))
 SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
 SketchLine_40.setName("SketchLine_58")
 SketchLine_40.result().setName("SketchLine_58")
 SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702)
 SketchLine_41.setName("SketchLine_57")
 SketchLine_41.result().setName("SketchLine_57")
-SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9"))
+SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_42.setName("SketchLine_46")
 SketchLine_42.result().setName("SketchLine_46")
 SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702)