Update "big models"

[modules/shaper.git] / test.models / ecran.py

diff --git a/test.models/ecran.py b/test.models/ecran.py
index 47effa5004651642e146ac0703d8208ae31abcaf..726b5099f25cc98eaf227f02717dd535fed9fdde 100644 (file)
--- a/test.models/ecran.py
+++ b/test.models/ecran.py
@@ -117,6 +117,7 @@ SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), S
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
 Extrusion_1.setName("Profil")
+Extrusion_1.result().setName("Extrusion_1_1")
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
@@ -157,6 +158,7 @@ SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1.setName("Decoupe_Angle")
+ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
 SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
 SketchLine_22.setName("SketchLine_29")
@@ -204,6 +206,7 @@ Sketch_3.setName("Sketch_4")
 Sketch_3.result().setName("Sketch_4")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 ExtrusionCut_2.setName("Chamfrein_1")
+ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"))
 SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
 SketchLine_30.setName("SketchLine_35")
@@ -372,11 +375,11 @@ SketchConstraintLength_8.setName("SketchConstraintLength_9")
 SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8)
 SketchConstraintLength_9.setName("SketchConstraintLength_10")
 SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result())
-SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707)
+SketchPoint_5 = Sketch_5.addPoint(153.5, -28.85)
 SketchPoint_5.setName("SketchPoint_7")
 SketchPoint_5.result().setName("SketchPoint_7")
 SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result())
-SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707)
+SketchLine_55 = Sketch_5.addLine(153.5, -28.85, -153.5, -28.85)
 SketchLine_55.setName("SketchLine_54")
 SketchLine_55.result().setName("SketchLine_54")
 SketchLine_55.setAuxiliary(True)
@@ -508,28 +511,28 @@ Sketch_5.setName("Sketch_6")
 Sketch_5.result().setName("Sketch_6")
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
-SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False)
-SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False)
-SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False)
+SketchArc_11 = Sketch_6.addArc(44.89, -23.55, 43.89, -23.55, 44.89, -22.55, False)
+SketchArc_12 = Sketch_6.addArc(44.89, -13.55, 44.89, -14.55, 43.89, -13.55, False)
+SketchArc_13 = Sketch_6.addArc(5.89, -13.55, 6.89, -13.55, 5.89, -14.55, False)
 SketchArc_13.setName("SketchArc_14")
 SketchArc_13.result().setName("SketchArc_14")
 SketchArc_13.results()[1].setName("SketchArc_14_2")
-SketchLine_76 = Sketch_6.addLine(6.89, -23.54999053274703, 43.89, -23.54999053274703)
+SketchLine_76 = Sketch_6.addLine(6.89, -23.55, 43.89, -23.55)
 SketchLine_76.setName("SketchLine_81")
 SketchLine_76.result().setName("SketchLine_81")
 SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint())
 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
-SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.89, -13.54999053274703)
+SketchLine_77 = Sketch_6.addLine(6.89, -13.55, 43.89, -13.55)
 SketchLine_77.setName("SketchLine_82")
 SketchLine_77.result().setName("SketchLine_82")
 SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint())
 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
-SketchLine_78 = Sketch_6.addLine(44.89, -22.54999053274703, 44.89, -14.54999053274703)
+SketchLine_78 = Sketch_6.addLine(44.89, -22.55, 44.89, -14.55)
 SketchLine_78.setName("SketchLine_83")
 SketchLine_78.result().setName("SketchLine_83")
 SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint())
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
-SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703)
+SketchLine_79 = Sketch_6.addLine(5.89, -22.55, 5.89, -14.55)
 SketchLine_79.setName("SketchLine_84")
 SketchLine_79.result().setName("SketchLine_84")
 SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint())
@@ -568,7 +571,7 @@ SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLi
 SketchLine_81.setName("SketchLine_86")
 SketchLine_81.result().setName("SketchLine_86")
 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3)
-SketchArc_14 = Sketch_6.addArc(5.89, -23.54999053274703, 5.89, -22.54999053274703, 6.89, -23.54999053274703, False)
+SketchArc_14 = Sketch_6.addArc(5.89, -23.55, 5.89, -22.55, 6.89, -23.55, False)
 SketchArc_14.setName("SketchArc_15")
 SketchArc_14.result().setName("SketchArc_15")
 SketchArc_14.results()[1].setName("SketchArc_15_2")
@@ -582,13 +585,13 @@ SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchArc_14.center(),
 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114")
 SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1])
 SketchConstraintEqual_10.setName("SketchConstraintEqual_11")
-SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704)
+SketchPoint_6 = Sketch_6.addPoint(0, -28.85)
 SketchPoint_6.setName("SketchPoint_8")
 SketchPoint_6.result().setName("SketchPoint_8")
-SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703)
+SketchPoint_7 = Sketch_6.addPoint(50.77, -28.85)
 SketchPoint_7.setName("SketchPoint_9")
 SketchPoint_7.result().setName("SketchPoint_9")
-SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702)
+SketchPoint_8 = Sketch_6.addPoint(101.54, -28.85)
 SketchPoint_8.setName("SketchPoint_10")
 SketchPoint_8.result().setName("SketchPoint_10")
 SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates())
@@ -710,7 +713,7 @@ SketchArc_24.results()[1].setName("SketchArc_25_2")
 SketchArc_23.setName("SketchArc_24")
 SketchArc_23.result().setName("SketchArc_24")
 SketchArc_23.results()[1].setName("SketchArc_24_2")
-SketchPoint_9 = Sketch_6.addPoint(0, -49.84999053274704)
+SketchPoint_9 = Sketch_6.addPoint(0, -49.85)
 SketchPoint_9.setName("SketchPoint_11")
 SketchPoint_9.result().setName("SketchPoint_11")
 SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result())
@@ -844,28 +847,28 @@ Sketch_6.setName("Sketch_7")
 Sketch_6.result().setName("Sketch_7")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
-SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
+SketchLine_126 = Sketch_7.addLine(-153.5, -37.05, -152.3, -37.05)
 SketchLine_126.setName("SketchLine_135")
 SketchLine_126.result().setName("SketchLine_135")
-SketchLine_127 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -43.54999111476925)
+SketchLine_127 = Sketch_7.addLine(-150.8, -38.55, -150.8, -43.55)
 SketchLine_127.setName("SketchLine_138")
 SketchLine_127.result().setName("SketchLine_138")
 SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e"))
 SketchPoint_10.setName("SketchPoint_12")
 SketchPoint_10.result().setName("SketchPoint_12")
-SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734)
+SketchLine_128 = Sketch_7.addLine(-150.8, -45.05, -153.5, -45.05)
 SketchLine_128.setName("SketchLine_131")
 SketchLine_128.result().setName("SketchLine_131")
 SketchLine_128.setAuxiliary(True)
 SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result())
 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120")
-SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747)
+SketchLine_129 = Sketch_7.addLine(-153.5, -45.05, -153.5, -37.05)
 SketchLine_129.setName("SketchLine_132")
 SketchLine_129.result().setName("SketchLine_132")
-SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734)
+SketchLine_130 = Sketch_7.addLine(-152.3, -45.05, -153.5, -45.05)
 SketchLine_130.setName("SketchLine_137")
 SketchLine_130.result().setName("SketchLine_137")
-SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747)
+SketchLine_131 = Sketch_7.addLine(-150.8, -37.05, -150.8, -45.05)
 SketchLine_131.setName("SketchLine_134")
 SketchLine_131.result().setName("SketchLine_134")
 SketchLine_131.setAuxiliary(True)
@@ -873,7 +876,7 @@ SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_131.endPoint
 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121")
 SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint())
 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122")
-SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745)
+SketchLine_132 = Sketch_7.addLine(-153.5, -37.05, -150.8, -37.05)
 SketchLine_132.setName("SketchLine_133")
 SketchLine_132.result().setName("SketchLine_133")
 SketchLine_132.setAuxiliary(True)
@@ -890,11 +893,11 @@ SketchPoint_11.setName("SketchPoint_13")
 SketchPoint_11.result().setName("SketchPoint_13")
 SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125")
-SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.8, -38.54999290880026, -152.3000099350335, -37.0499905327475, False)
+SketchArc_59 = Sketch_7.addArc(-152.3, -38.55, -150.8, -38.55, -152.3000099350335, -37.05, False)
 SketchArc_59.setName("SketchArc_60")
 SketchArc_59.result().setName("SketchArc_60")
 SketchArc_59.results()[1].setName("SketchArc_60_2")
-SketchLine_133 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -45.049990532747)
+SketchLine_133 = Sketch_7.addLine(-150.8, -38.55, -150.8, -45.05)
 SketchLine_133.setName("SketchLine_136")
 SketchLine_133.result().setName("SketchLine_136")
 SketchLine_133.setAuxiliary(True)
@@ -912,7 +915,7 @@ SketchConstraintCoincidence_123 = Sketch_7.setCoincident(SketchLine_126.endPoint
 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130")
 SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result())
 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131")
-SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False)
+SketchArc_60 = Sketch_7.addArc(-152.3, -43.55, -152.3, -45.05, -150.8, -43.55, False)
 SketchArc_60.setName("SketchArc_61")
 SketchArc_60.result().setName("SketchArc_61")
 SketchArc_60.results()[1].setName("SketchArc_61_2")