[Code coverage SketchPlugin]: Increase coverage of Arc, Split and Trim features

[modules/shaper.git] / src / SketchPlugin / Test / TestSplitPreview.py

diff --git a/src/SketchPlugin/Test/TestSplitPreview.py b/src/SketchPlugin/Test/TestSplitPreview.py
new file mode 100644 (file)
index 0000000..ac59f96
--- /dev/null
+++ b/src/SketchPlugin/Test/TestSplitPreview.py
@@ -0,0 +1,88 @@
+## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from salome.shaper import model
+
+from ModelAPI import *
+from GeomDataAPI import *
+
+# base sketch
+model.begin()
+partSet = model.moduleDocument()
+Part = model.addPart(partSet)
+Part_doc = Part.document()
+Sketch = model.addSketch(Part_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch.addLine(0, 20, 100, 20)
+SketchLine_2 = Sketch.addLine(20, 0, 20, 40)
+SketchLine_3 = Sketch.addLine(80, 0, 80, 40)
+SketchCircle_1 = Sketch.addCircle(50, 50, 50)
+SketchPoint_1 = Sketch.addPoint(20, 20)
+SketchConstraintCoincidence_1 = Sketch.setCoincident(SketchPoint_1.coordinates(), SketchLine_2.result())
+SketchConstraintCoincidence_2 = Sketch.setCoincident(SketchPoint_1.coordinates(), SketchLine_1.result())
+SketchPoint_2 = Sketch.addPoint(80, 20)
+SketchConstraintCoincidence_3 = Sketch.setCoincident(SketchPoint_2.coordinates(), SketchLine_1.result())
+SketchConstraintCoincidence_4 = Sketch.setCoincident(SketchPoint_2.coordinates(), SketchLine_3.result())
+SketchPoint_3 = Sketch.addPoint(20, 10)
+SketchConstraintCoincidence_5 = Sketch.setCoincident(SketchPoint_3.coordinates(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_6 = Sketch.setCoincident(SketchPoint_3.coordinates(), SketchLine_2.result())
+SketchPoint_4 = Sketch.addPoint(80, 10)
+SketchConstraintCoincidence_7 = Sketch.setCoincident(SketchPoint_4.coordinates(), SketchCircle_1.results()[1])
+SketchConstraintCoincidence_8 = Sketch.setCoincident(SketchPoint_4.coordinates(), SketchLine_3.result())
+model.do()
+model.end()
+
+aSession = ModelAPI_Session.get()
+aSketchFeature = featureToCompositeFeature(Sketch.feature())
+
+# Create Split feature for a line
+aSession.startOperation()
+aSplit = aSketchFeature.addFeature("SketchSplit")
+aSelectedObj = aSplit.reference("SelectedObject")
+aSelectedObj.setValue(SketchLine_1.feature())
+aSelectedPoint = geomDataAPI_Point2D(aSplit.attribute("SelectedPoint"))
+aSelectedPoint.setValue(50, 20)
+aPreviewObj = aSplit.reference("PreviewObject")
+aPreviewObj.setValue(SketchLine_1.feature())
+aPreviewPoint = geomDataAPI_Point2D(aSplit.attribute("PreviewPoint"))
+aPreviewPoint.setValue(aSelectedPoint.pnt())
+aSession.finishOperation()
+
+model.testNbSubFeatures(Sketch, "SketchArc", 0)
+model.testNbSubFeatures(Sketch, "SketchCircle", 1)
+model.testNbSubFeatures(Sketch, "SketchLine", 5)
+model.testNbSubFeatures(Sketch, "SketchConstraintCoincidence", 12)
+
+# Create Split feature for a circle to perform its substitution by an arc
+aSession.startOperation()
+aSplit = aSketchFeature.addFeature("SketchSplit")
+aSelectedObj = aSplit.reference("SelectedObject")
+aSelectedObj.setValue(SketchCircle_1.feature())
+aSelectedPoint = geomDataAPI_Point2D(aSplit.attribute("SelectedPoint"))
+aSelectedPoint.setValue(50, 0)
+aPreviewObj = aSplit.reference("PreviewObject")
+aPreviewObj.setValue(SketchCircle_1.feature())
+aPreviewPoint = geomDataAPI_Point2D(aSplit.attribute("PreviewPoint"))
+aPreviewPoint.setValue(aSelectedPoint.pnt())
+aSession.finishOperation()
+
+model.testNbSubFeatures(Sketch, "SketchArc", 2)
+model.testNbSubFeatures(Sketch, "SketchCircle", 0)
+model.testNbSubFeatures(Sketch, "SketchLine", 5)
+model.testNbSubFeatures(Sketch, "SketchConstraintCoincidence", 16)