Issue #2024: Redesign of circle and arc of circle

[modules/shaper.git] / src / SketchAPI / SketchAPI_MacroArc.cpp

diff --git a/src/SketchAPI/SketchAPI_MacroArc.cpp b/src/SketchAPI/SketchAPI_MacroArc.cpp
new file mode 100644 (file)
index 0000000..2fa73d5
--- /dev/null
+++ b/src/SketchAPI/SketchAPI_MacroArc.cpp
@@ -0,0 +1,190 @@
+// Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
+
+// File:        SketchAPI_MacroArc.cpp
+// Created:     09 June 2016
+// Author:      Dmitry Bobylev
+
+#include "SketchAPI_MacroArc.h"
+
+#include <GeomAPI_Pnt2d.h>
+
+#include <ModelHighAPI_Double.h>
+#include <ModelHighAPI_Dumper.h>
+#include <ModelHighAPI_Selection.h>
+#include <ModelHighAPI_Tools.h>
+
+#include <SketchPlugin_ConstraintCoincidence.h>
+#include <SketchPlugin_ConstraintTangent.h>
+
+/// Obtain constraints prepared by tangent arc
+static std::list<FeaturePtr> tangentArcConstraints(const FeaturePtr& theArc);
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature> & theFeature)
+: SketchAPI_SketchEntity(theFeature)
+{
+  initialize();
+}
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             double theCenterX, double theCenterY,
+                             double theStartX, double theStartY,
+                             double theEndX, double theEndY,
+                             bool theInversed)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if(initialize()) {
+    setByCenterStartEnd(theCenterX, theCenterY, theStartX,
+                        theStartY, theEndX, theEndY, theInversed);
+  }
+}
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                             bool theInversed)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if(initialize()) {
+    setByCenterStartEnd(theCenter, theStart, theEnd, theInversed);
+  }
+}
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             double theStartX, double theStartY,
+                             double theEndX, double theEndY,
+                             double thePassedX, double thePassedY)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if (initialize()) {
+    setByStartEndPassed(theStartX, theStartY, theEndX, theEndY, thePassedX, thePassedY);
+  }
+}
+
+//===============================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if (initialize()) {
+    setByStartEndPassed(theStart, theEnd, thePassed);
+  }
+}
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             const ModelHighAPI_RefAttr& theTangentPoint,
+                             double theEndX, double theEndY,
+                             bool theInversed)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if (initialize()) {
+    setByTangent(theTangentPoint, theEndX, theEndY, theInversed);
+  }
+}
+
+//================================================================================================
+SketchAPI_MacroArc::SketchAPI_MacroArc(const std::shared_ptr<ModelAPI_Feature>& theFeature,
+                             const ModelHighAPI_RefAttr& theTangentPoint,
+                             const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                             bool theInversed)
+: SketchAPI_SketchEntity(theFeature)
+{
+  if (initialize()) {
+    setByTangent(theTangentPoint, theEnd, theInversed);
+  }
+}
+
+//================================================================================================
+SketchAPI_MacroArc::~SketchAPI_MacroArc()
+{
+
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByCenterStartEnd(double theCenterX, double theCenterY,
+                                        double theStartX, double theStartY,
+                                        double theEndX, double theEndY,
+                                        bool theInversed)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_CENTER_AND_POINTS(), myarcType);
+  fillAttribute(center(), theCenterX, theCenterY);
+  fillAttribute(startPoint1(), theStartX, theStartY);
+  fillAttribute(endPoint1(), theEndX, theEndY);
+  fillAttribute(theInversed, myreversed);
+
+  execute();
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByCenterStartEnd(const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
+                                        const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
+                                        const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                                        bool theInversed)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_CENTER_AND_POINTS(), myarcType);
+  fillAttribute(theCenter, mycenter);
+  fillAttribute(theStart, mystartPoint1);
+  fillAttribute(theEnd, myendPoint1);
+  fillAttribute(theInversed, myreversed);
+
+  execute();
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByStartEndPassed(double theStartX, double theStartY,
+                                        double theEndX, double theEndY,
+                                        double thePassedX, double thePassedY)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_THREE_POINTS(), myarcType);
+  fillAttribute(startPoint2(), theStartX, theStartY);
+  fillAttribute(endPoint2(), theEndX, theEndY);
+  fillAttribute(passedPoint(), thePassedX, thePassedY);
+
+  execute();
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByStartEndPassed(const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
+                                        const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                                        const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_THREE_POINTS(), myarcType);
+  fillAttribute(theStart, mystartPoint2);
+  fillAttribute(theEnd, myendPoint2);
+  fillAttribute(thePassed, mypassedPoint);
+
+  execute();
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByTangent(const ModelHighAPI_RefAttr& theTangentPoint,
+                                 double theEndX, double theEndY,
+                                 bool theInversed)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_TANGENT_EDGE(), myarcType);
+  fillAttribute(theTangentPoint, mytangentPoint);
+  fillAttribute(endPoint3(), theEndX, theEndY);
+  fillAttribute(theInversed, myreversed);
+
+  execute();
+}
+
+//================================================================================================
+void SketchAPI_MacroArc::setByTangent(const ModelHighAPI_RefAttr& theTangentPoint,
+                                 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
+                                 bool theInversed)
+{
+  fillAttribute(SketchPlugin_MacroArc::ARC_TYPE_BY_TANGENT_EDGE(), myarcType);
+  fillAttribute(theTangentPoint, mytangentPoint);
+  fillAttribute(theEnd, myendPoint3);
+  fillAttribute(theInversed, myreversed);
+
+  execute();
+}