--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+model.addParameter(Part_1_doc, "angle", "27.5")
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(0, 4, 6.2, 4)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_2 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(6.2, 4, 6.2, 2.5)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
+SketchLine_4 = Sketch_1.addLine(6.2, 2.5, 3.5, 2)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(3.5, 2, 3.5, 0)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_6 = SketchProjection_2.createdFeature()
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.result())
+SketchLine_7 = Sketch_1.addLine(3.5, 0, 0, 0)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_7.endPoint())
+SketchLine_8 = Sketch_1.addLine(0, 4, 0, 0)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_2).startPoint(), SketchLine_8.endPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_3.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 6.2)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_7.result(), 3.5)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), 2)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_3.result(), 1.5)
+SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_8.result(), 4)
+model.do()
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3r-SketchLine_4r-SketchLine_5r-SketchLine_7r-SketchLine_8f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1"))
+SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Revolution_1_1/Generated_Face_2&Revolution_1_1/Generated_Face_1__cc"), False)
+SketchPoint_1 = SketchProjection_3.createdFeature()
+SketchCircle_1 = Sketch_2.addCircle(0, 0, 4.75)
+SketchCircle_1.setAuxiliary(True)
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
+SketchCircle_2 = Sketch_2.addCircle(4.113620667976081, 2.375000000000003, 1.1)
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_2.center())
+SketchCircle_3 = Sketch_2.addCircle(-4.113620667974014, 2.375000000003604, 1.1)
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_3.center())
+SketchCircle_4 = Sketch_2.addCircle(4.163806340121522e-012, -4.75000000000001, 1.1)
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_4.center())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
+SketchConstraintEqual_2 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
+SketchLine_9 = Sketch_2.addLine(0, 0, 4.113620667976081, 2.375000000000003)
+SketchLine_9.setAuxiliary(True)
+SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_9.endPoint())
+SketchLine_10 = Sketch_2.addLine(-4.113620667974014, 2.375000000003604, 0, 0)
+SketchLine_10.setAuxiliary(True)
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_10.endPoint())
+SketchLine_11 = Sketch_2.addLine(4.163806340121522e-012, -4.75000000000001, 0, 0)
+SketchLine_11.setAuxiliary(True)
+SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchCircle_4.center(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_11.endPoint())
+SketchConstraintRadius_1 = Sketch_2.setRadius(SketchCircle_2.results()[1], 1.1)
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), False)
+SketchLine_12 = SketchProjection_4.createdFeature()
+SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_12.result(), 30.00000000000006)
+SketchConstraintAngle_2 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_10.result(), 119.9999999999498)
+SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_10.result(), SketchLine_11.result(), 120.0000000001004)
+SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_9.result(), 4.75)
+SketchCircle_5 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.65)
+SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_5.center())
+SketchCircle_6 = Sketch_2.addCircle(2.552173139647412, 4.006109367611208, 0.8)
+SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_6.center())
+SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchCircle_6.center())
+SketchCircle_7 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.65)
+SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_7.center())
+SketchCircle_8 = Sketch_2.addCircle(4.745479052513824, 0.20719208998535, 0.8)
+SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_8.center())
+SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchCircle_8.center())
+SketchLine_13 = Sketch_2.addLine(0, 0, 2.552173139647412, 4.006109367611208)
+SketchLine_13.setAuxiliary(True)
+SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_13.startPoint())
+SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchCircle_5.center(), SketchLine_13.endPoint())
+SketchLine_14 = Sketch_2.addLine(0, 0, 4.745479052513824, 0.20719208998535)
+SketchLine_14.setAuxiliary(True)
+SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_14.startPoint())
+SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchCircle_7.center(), SketchLine_14.endPoint())
+SketchConstraintEqual_3 = Sketch_2.setEqual(SketchCircle_7.results()[1], SketchCircle_5.results()[1])
+SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_8.results()[1], SketchCircle_6.results()[1])
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_7.results()[1], 0.65)
+SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_8.results()[1], 0.8)
+SketchCircle_9 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.65)
+SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_9.center())
+SketchCircle_10 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.65)
+SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_10.center())
+SketchCircle_11 = Sketch_2.addCircle(-2.552173139482203, 4.006109367717388, 0.8)
+SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_11.center())
+SketchCircle_12 = Sketch_2.addCircle(-4.745479052513825, 0.2071920899853395, 0.8)
+SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchCircle_12.center())
+SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchCircle_11.center())
+SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_6.results()[1], SketchCircle_11.results()[1])
+SketchConstraintEqual_6 = Sketch_2.setEqual(SketchCircle_5.results()[1], SketchCircle_9.results()[1])
+SketchConstraintEqual_7 = Sketch_2.setEqual(SketchCircle_9.results()[1], SketchCircle_10.results()[1])
+SketchConstraintEqual_8 = Sketch_2.setEqual(SketchCircle_11.results()[1], SketchCircle_12.results()[1])
+SketchLine_15 = Sketch_2.addLine(-2.552173139482203, 4.006109367717388, 0, 0)
+SketchLine_15.setAuxiliary(True)
+SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchCircle_9.center(), SketchLine_15.startPoint())
+SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_15.endPoint())
+SketchLine_16 = Sketch_2.addLine(-4.745479052513825, 0.2071920899853395, 0, 0)
+SketchLine_16.setAuxiliary(True)
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_10.center(), SketchLine_16.startPoint())
+SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_16.endPoint())
+SketchCircle_13 = Sketch_2.addCircle(-2.193305912870557, -4.213301457594897, 0.8)
+SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_13.center())
+SketchCircle_14 = Sketch_2.addCircle(2.193305912973027, -4.213301457541542, 0.8)
+SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchCircle_1.results()[1], SketchCircle_14.center())
+SketchConstraintEqual_9 = Sketch_2.setEqual(SketchCircle_14.results()[1], SketchCircle_13.results()[1])
+SketchConstraintEqual_10 = Sketch_2.setEqual(SketchCircle_12.results()[1], SketchCircle_13.results()[1])
+SketchLine_17 = Sketch_2.addLine(0, 0, -2.193305912870557, -4.213301457594897)
+SketchLine_17.setAuxiliary(True)
+SketchConstraintCoincidence_41 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_17.startPoint())
+SketchConstraintCoincidence_42 = Sketch_2.setCoincident(SketchCircle_13.center(), SketchLine_17.endPoint())
+SketchLine_18 = Sketch_2.addLine(0, 0, 2.193305912973027, -4.213301457541542)
+SketchLine_18.setAuxiliary(True)
+SketchConstraintCoincidence_43 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_18.startPoint())
+SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchCircle_14.center(), SketchLine_18.endPoint())
+SketchConstraintAngle_4 = Sketch_2.setAngleBackward(SketchLine_9.result(), SketchLine_14.result(), "angle")
+SketchConstraintAngle_5 = Sketch_2.setAngle(SketchLine_9.result(), SketchLine_13.result(), "angle")
+SketchConstraintAngle_6 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_15.result(), "angle")
+SketchConstraintAngle_7 = Sketch_2.setAngleBackward(SketchLine_16.result(), SketchLine_10.result(), "angle")
+SketchConstraintAngle_8 = Sketch_2.setAngle(SketchLine_17.result(), SketchLine_11.result(), "angle")
+SketchConstraintAngle_9 = Sketch_2.setAngle(SketchLine_11.result(), SketchLine_18.result(), "angle")
+SketchProjection_5 = Sketch_2.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_19 = SketchProjection_5.createdFeature()
+SketchCircle_15 = Sketch_2.addCircle(0, 5, 0.45)
+SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchLine_19.result(), SketchCircle_15.center())
+SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_15.results()[1], 0.45)
+SketchLine_20 = Sketch_2.addLine(0, 0, 4.385635518227006, -2.793957963403483)
+SketchLine_20.setAuxiliary(True)
+SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_20.startPoint())
+SketchCircle_16 = Sketch_2.addCircle(3.373565783251674, -2.149198433387089, 0.3)
+SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchLine_20.result(), SketchCircle_16.center())
+SketchCircle_17 = Sketch_2.addCircle(4.385635518227006, -2.793957963403483, 0.5)
+SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchCircle_17.center())
+SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_16.results()[1], 0.3)
+SketchConstraintRadius_6 = Sketch_2.setRadius(SketchCircle_17.results()[1], 0.5)
+SketchConstraintAngle_10 = Sketch_2.setAngleBackward(SketchLine_14.result(), SketchLine_20.result(), 35.00000000000006)
+SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_15.center(), SketchLine_12.result(), 5, True)
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_16.center(), SketchAPI_Line(SketchLine_19).startPoint(), 4, True)
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Line(SketchLine_19).startPoint(), SketchCircle_17.center(), 5.2, True)
+model.do()
+ExtrusionCut_1_objects_1 = [model.selection("FACE", "Sketch_2/Face-SketchCircle_9_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_17_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_16_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")]
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
+ExtrusionCut_2_objects_1 = [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_12_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_8_2f")]
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Axis_4 = model.addAxis(Part_1_doc, 0, -1, -10)
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_15_2f")], model.selection("EDGE", "Axis_1"), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_3.result().setDeflection(1e-005)
+Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
+SketchLine_21 = Sketch_3.addLine(3.5, 2.508501119175777, 3.5, 4.934853156880259)
+SketchLine_22 = Sketch_3.addLine(3.5, 4.934853156880259, 6.2, 4.934853156880259)
+SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
+SketchLine_23 = Sketch_3.addLine(6.2, 4.934853156880259, 6.2, 3.008501119175777)
+SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
+SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"), False)
+SketchLine_24 = SketchProjection_6.createdFeature()
+SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_24.result())
+SketchLine_25 = Sketch_3.addLine(6.2, 3.008501119175777, 3.5, 2.508501119175777)
+SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.startPoint())
+SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_25.endPoint())
+SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_5"), False)
+SketchLine_26 = SketchProjection_7.createdFeature()
+SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_26.result())
+SketchConstraintCoincidence_55 = Sketch_3.setCoincident(SketchLine_21.endPoint(), SketchLine_26.result())
+SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_22.result())
+SketchConstraintCoincidence_56 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.result())
+SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
+SketchLine_27 = SketchProjection_8.createdFeature()
+SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_25.result(), SketchLine_27.result())
+SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"), False)
+SketchLine_28 = SketchProjection_9.createdFeature()
+SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_28.result(), 0.5, True)
+model.do()
+Revolution_2 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_13_2f"), model.selection("FACE", "Sketch_2/Face-SketchCircle_14_2f")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0)
+Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_3_1")], [model.selection("SOLID", "Common_1_1"), model.selection("SOLID", "Common_1_2")])
+model.do()
+model.testHaveNamingEdges(Cut_1, model, Part_1_doc)
+model.end()
