--- /dev/null
+## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+from GeomAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(50, -50, -50, -50)
+SketchLine_2 = Sketch_1.addLine(-50, -50, -50, 50)
+SketchLine_3 = Sketch_1.addLine(-50, 50, 50, 50)
+SketchLine_4 = Sketch_1.addLine(50, 50, 50, -50)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r")], model.selection(), 100, 0)
+Extrusion_1.result().setName("Cube")
+
+Edge_1_objects = [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"),
+ model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"),
+ model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"),
+ model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"),
+ model.selection("EDGE", "Cube/Generated_Face_2&Cube/Generated_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_2&Cube/From_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_2&Cube/To_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_3&Cube/Generated_Face_2"),
+ model.selection("EDGE", "Cube/Generated_Face_1&Cube/From_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_3&Cube/To_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_3&Cube/From_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_1&Cube/To_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_4&Cube/Generated_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_4&Cube/From_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_4&Cube/To_Face_1"),
+ model.selection("EDGE", "Cube/Generated_Face_4&Cube/Generated_Face_3")]
+Edge_1 = model.addEdge(Part_1_doc, Edge_1_objects)
+# check all the names of Edge_1 results are different
+names = set()
+for res in Edge_1.results():
+ names.add(res.name())
+assert(len(names) == len(Edge_1.results())), "Some edges have equal name"
+
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchCircle_1 = Sketch_2.addCircle(200, 0, 50)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection("EDGE", "Cube"), 10, 0)
+model.do()
+# check Extrusion_2
+model.testNbResults(Extrusion_2, 1)
+model.testNbSubResults(Extrusion_2, [0])
+model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.FACE, [3])
+model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.EDGE, [6])
+model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.VERTEX, [12])
+model.testResultsVolumes(Extrusion_2, [78539.81633974483])
+
+model.end()
+
+assert(model.checkPythonDump())
