--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_1 = SketchProjection_1.createdFeature()
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"), False)
+SketchLine_2 = SketchProjection_2.createdFeature()
+SketchArc_1 = Sketch_1.addArc(0, 0, 20, 0, 0, 20, False)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.result(), SketchArc_1.endPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.center(), SketchAPI_Line(SketchLine_2).startPoint())
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 20)
+SketchLine_3 = Sketch_1.addLine(0, 32.83768482493814, 29.63380351263586, 0)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_2.result())
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
+SketchLine_4 = Sketch_1.addLine(29.63380351263586, 0, 62.471488337574, 29.63380351263586)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchLine_5 = Sketch_1.addLine(62.471488337574, 29.63380351263586, 32.83768482493814, 62.471488337574)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchLine_6 = Sketch_1.addLine(32.83768482493814, 62.471488337574, 0, 32.83768482493814)
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_6.endPoint())
+SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_3.result(), SketchLine_4.result())
+SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_3.result(), SketchLine_5.result())
+SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_4.result(), SketchLine_6.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_3.result(), 22, True)
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_4.result())
+SketchLine_7 = Sketch_1.addLine(0, 20, 0, 0)
+SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_7.endPoint())
+SketchLine_8 = Sketch_1.addLine(0, 0, 20, 0)
+SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_1).startPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_8.endPoint())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f"), model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_7f-SketchLine_8f")], model.selection(), 30, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchCircle_1 = Sketch_2.addCircle(28.24714778717828, 31.38901581881253, 10)
+SketchProjection_3 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"), False)
+SketchLine_9 = SketchProjection_3.createdFeature()
+SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_9.result(), 20, True)
+SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"), False)
+SketchLine_10 = SketchProjection_4.createdFeature()
+SketchConstraintDistance_3 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_10.result(), 20, True)
+SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 10)
+model.do()
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r_wire")], model.selection(), 10, 0)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), 0, 10)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2r")], model.selection(), -10, 20)
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 10)
+Translation_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], 50, 10, 10)
+Filters = model.filters(Part_1_doc, [model.addFilter(name = "RelativeToSolid", args = [model.selection("SOLID", "Extrusion_1_1"), "not_out"])])
+model.end()
+
+Solid1 = Extrusion_1.results()[0].resultSubShapePair()[0]
+Solid2 = Extrusion_1.results()[1].resultSubShapePair()[0]
+Solid3 = Extrusion_2.result().resultSubShapePair()[0]
+Solid4 = Extrusion_3.result().resultSubShapePair()[0]
+Solid5 = Extrusion_4.result().resultSubShapePair()[0]
+Solid6 = Translation_1.result().resultSubShapePair()[0]
+
+from GeomAPI import GeomAPI_Shape
+emptyShape = GeomAPI_Shape()
+
+Reference = {
+ # Solids
+ model.selection(Solid1, emptyShape): True,
+ model.selection(Solid2, emptyShape): False,
+ model.selection(Solid3, emptyShape): False,
+ model.selection(Solid4, emptyShape): True,
+ model.selection(Solid5, emptyShape): True,
+ model.selection(Solid6, emptyShape): False,
+
+ # Faces of solid 1
+ model.selection("FACE", "Extrusion_1_1/To_Face"): True,
+ model.selection("FACE", "Extrusion_1_1/From_Face"): True,
+ model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"): True,
+ model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"): True,
+ model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"): True,
+ model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"): True,
+ # Faces of solid 2
+ model.selection("FACE", "Extrusion_1_2/To_Face"): False,
+ model.selection("FACE", "Extrusion_1_2/From_Face"): False,
+ model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7"): False,
+ model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8"): False,
+ model.selection("FACE", "Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2"): False,
+ # Faces of solid 3
+ model.selection("FACE", "Extrusion_2_1/To_Face"): False,
+ model.selection("FACE", "Extrusion_2_1/From_Face"): True,
+ model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2"): False,
+ # Faces of solid 4
+ model.selection("FACE", "Extrusion_3_1/To_Face"): True,
+ model.selection("FACE", "Extrusion_3_1/From_Face"): True,
+ model.selection("FACE", "Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2"): True,
+ # Faces of solid 5
+ model.selection("FACE", "Extrusion_4_1/To_Face"): True,
+ model.selection("FACE", "Extrusion_4_1/From_Face"): True,
+ model.selection("FACE", "Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2"): True,
+ # Faces of solid 6
+ model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_1"): False,
+ model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_2"): False,
+ model.selection("FACE", "Translation_1_1/MF:Translated&Cylinder_1_1/Face_3"): False,
+
+ # Edges of solid 1
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/From_Face]"): True,
+ model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"): True,
+ # Edges of solid 2
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/To_Face]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/From_Face]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/From_Face]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/To_Face]"): False,
+ model.selection("EDGE", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): False,
+ # Edges of solid 3
+ model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face]"): False,
+ model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face]"): True,
+ model.selection("EDGE", "([Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face])([Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face])"): False,
+ # Edges of solid 4
+ model.selection("EDGE", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face]"): True,
+ model.selection("EDGE", "([Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face])([Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face])"): True,
+ # Edges of solid 5
+ model.selection("EDGE", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face]"): True,
+ model.selection("EDGE", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face]"): True,
+ model.selection("EDGE", "([Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face])([Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face])"): True,
+ # Edges of solid 6
+ model.selection("EDGE", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2]"): False,
+ model.selection("EDGE", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3]"): False,
+ model.selection("EDGE", "([Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2])([Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3])"): False,
+
+ # Vertices of solid 1
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/From_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/From_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/From_Face]"): True,
+ # Vertices of solid 2
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/To_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/To_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_2/From_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/From_Face]"): False,
+ # Vertices of solid 3
+ model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/To_Face]"): False,
+ model.selection("VERTEX", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_2_1/From_Face]"): True,
+ # Vertices of solid 4
+ model.selection("VERTEX", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_3_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_3_1/From_Face]"): True,
+ # Vertices of solid 5
+ model.selection("VERTEX", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/To_Face]"): True,
+ model.selection("VERTEX", "[Extrusion_4_1/Generated_Face&Sketch_2/SketchCircle_1_2][Extrusion_4_1/From_Face]"): True,
+ # Vertices of solid 6
+ model.selection("VERTEX", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_2]"): False,
+ model.selection("VERTEX", "[Translation_1_1/MF:Translated&Cylinder_1_1/Face_1][Translation_1_1/MF:Translated&Cylinder_1_1/Face_3]"): False,
+}
+model.checkFilter(Part_1_doc, model, Filters, Reference)
