--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(25, -25, -25, -25)
+SketchLine_2 = Sketch_1.addLine(-25, -25, -25, 25)
+SketchLine_3 = Sketch_1.addLine(-25, 25, 25, 25)
+SketchLine_4 = Sketch_1.addLine(25, 25, 25, -25)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_2.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 50)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.result(), 25, True)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_2.result(), 25, True)
+SketchMultiRotation_1_objects = [SketchLine_1.result(), SketchLine_2.result(), SketchLine_3.result(), SketchLine_4.result()]
+SketchMultiRotation_1 = Sketch_1.addRotation(SketchMultiRotation_1_objects, SketchAPI_Point(SketchPoint_1).coordinates(), 45, 2, True)
+[SketchLine_5, SketchLine_6, SketchLine_7, SketchLine_8] = SketchMultiRotation_1.rotated()
+SketchLine_8.setName("SketchLine_14")
+SketchLine_8.result().setName("SketchLine_14")
+SketchLine_7.setName("SketchLine_11")
+SketchLine_7.result().setName("SketchLine_11")
+SketchLine_6.setName("SketchLine_8")
+SketchLine_6.result().setName("SketchLine_8")
+SketchCircle_1 = Sketch_1.addCircle(80, 0, 20)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 20)
+SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
+SketchLine_9 = SketchProjection_2.createdFeature()
+SketchLine_9.setName("SketchLine_9")
+SketchLine_9.result().setName("SketchLine_9")
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_9.result())
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_9).startPoint(), SketchCircle_1.center(), 80, True)
+SketchMultiRotation_2 = Sketch_1.addRotation([SketchCircle_1.results()[1]], SketchAPI_Line(SketchLine_9).startPoint(), 360, 8, True)
+[SketchCircle_2, SketchCircle_3, SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7, SketchCircle_8] = SketchMultiRotation_2.rotated()
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 50, 0)
+Compound_1_objects = [model.selection("COMPSOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5"), model.selection("SOLID", "Extrusion_1_6"), model.selection("SOLID", "Extrusion_1_7"), model.selection("SOLID", "Extrusion_1_8"), model.selection("SOLID", "Extrusion_1_9")]
+Compound_1 = model.addCompound(Part_1_doc, Compound_1_objects)
+Union_1_objects = [model.selection("SOLID", "Compound_1_1_1_1"), model.selection("SOLID", "Compound_1_1_1_2"), model.selection("SOLID", "Compound_1_1_1_3")]
+Union_1 = model.addUnion(Part_1_doc, Union_1_objects)
+
+model.testHaveNamingSubshapes(Union_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Union_1, 1)
+model.testNbSubResults(Union_1, [7])
+model.testNbSubShapes(Union_1, GeomAPI_Shape.SOLID, [7])
+model.testNbSubShapes(Union_1, GeomAPI_Shape.FACE, [46])
+model.testNbSubShapes(Union_1, GeomAPI_Shape.EDGE, [176])
+model.testNbSubShapes(Union_1, GeomAPI_Shape.VERTEX, [352])
+model.testResultsVolumes(Union_1, [146446.6094067262311])
+
+assert(model.checkPythonDump())
