--- /dev/null
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
+#=========================================================================
+# Initialization of the test
+#=========================================================================
+from ModelAPI import *
+from GeomDataAPI import *
+from GeomAlgoAPI import *
+from GeomAPI import *
+import math
+
+__updated__ = "2014-12-16"
+
+aSession = ModelAPI_Session.get()
+aDocument = aSession.moduleDocument()
+
+aSession.startOperation()
+aPartFeature = aDocument.addFeature("Part")
+aSession.finishOperation()
+assert (len(aPartFeature.results()) == 1)
+aPartResult = modelAPI_ResultPart(aPartFeature.firstResult())
+aPart = aPartResult.partDoc()
+
+#=========================================================================
+# Create a sketch to extrude
+#=========================================================================
+aSession.startOperation()
+aSketchFeature = featureToCompositeFeature(aPart.addFeature("Sketch"))
+origin = geomDataAPI_Point(aSketchFeature.attribute("Origin"))
+origin.setValue(0, 0, 0)
+dirx = geomDataAPI_Dir(aSketchFeature.attribute("DirX"))
+dirx.setValue(1, 0, 0)
+norm = geomDataAPI_Dir(aSketchFeature.attribute("Norm"))
+norm.setValue(0, 0, 1)
+aLineA1 = aSketchFeature.addFeature("SketchLine")
+aLineB1 = aSketchFeature.addFeature("SketchLine")
+aLineC1 = aSketchFeature.addFeature("SketchLine")
+aLineD1 = aSketchFeature.addFeature("SketchLine")
+aLineA1StartPoint = geomDataAPI_Point2D(aLineA1.attribute("StartPoint"))
+aLineA1EndPoint = geomDataAPI_Point2D(aLineA1.attribute("EndPoint"))
+aLineB1StartPoint = geomDataAPI_Point2D(aLineB1.attribute("StartPoint"))
+aLineB1EndPoint = geomDataAPI_Point2D(aLineB1.attribute("EndPoint"))
+aLineC1StartPoint = geomDataAPI_Point2D(aLineC1.attribute("StartPoint"))
+aLineC1EndPoint = geomDataAPI_Point2D(aLineC1.attribute("EndPoint"))
+aLineD1StartPoint = geomDataAPI_Point2D(aLineD1.attribute("StartPoint"))
+aLineD1EndPoint = geomDataAPI_Point2D(aLineD1.attribute("EndPoint"))
+aLineA1StartPoint.setValue(-100, 0)
+aLineA1EndPoint.setValue(-50, 0)
+aLineB1StartPoint.setValue(-50, 0)
+aLineB1EndPoint.setValue(-50, 50)
+aLineC1StartPoint.setValue(-50, 50)
+aLineC1EndPoint.setValue(-100, 50)
+aLineD1StartPoint.setValue(-100, 50)
+aLineD1EndPoint.setValue(-100, 0)
+aLineA2 = aSketchFeature.addFeature("SketchLine")
+aLineB2 = aSketchFeature.addFeature("SketchLine")
+aLineC2 = aSketchFeature.addFeature("SketchLine")
+aLineD2 = aSketchFeature.addFeature("SketchLine")
+aLineA2StartPoint = geomDataAPI_Point2D(aLineA2.attribute("StartPoint"))
+aLineA2EndPoint = geomDataAPI_Point2D(aLineA2.attribute("EndPoint"))
+aLineB2StartPoint = geomDataAPI_Point2D(aLineB2.attribute("StartPoint"))
+aLineB2EndPoint = geomDataAPI_Point2D(aLineB2.attribute("EndPoint"))
+aLineC2StartPoint = geomDataAPI_Point2D(aLineC2.attribute("StartPoint"))
+aLineC2EndPoint = geomDataAPI_Point2D(aLineC2.attribute("EndPoint"))
+aLineD2StartPoint = geomDataAPI_Point2D(aLineD2.attribute("StartPoint"))
+aLineD2EndPoint = geomDataAPI_Point2D(aLineD2.attribute("EndPoint"))
+aLineA2StartPoint.setValue(100, 0)
+aLineA2EndPoint.setValue(50, 0)
+aLineB2StartPoint.setValue(50, 0)
+aLineB2EndPoint.setValue(50, 50)
+aLineC2StartPoint.setValue(50, 50)
+aLineC2EndPoint.setValue(100, 50)
+aLineD2StartPoint.setValue(100, 50)
+aLineD2EndPoint.setValue(100, 0)
+aSession.finishOperation()
+
+#=========================================================================
+# Make extrusion
+#=========================================================================
+aSketchResult = modelAPI_ResultConstruction(aSketchFeature.firstResult())
+assert (aSketchResult.facesNum() > 1)
+
+aSession.startOperation()
+anExtrusionFt = aPart.addFeature("Extrusion")
+assert (anExtrusionFt.getKind() == "Extrusion")
+anExtrusionFt.selectionList("base").append(aSketchResult, aSketchResult.face(0))
+anExtrusionFt.selectionList("base").append(aSketchResult, aSketchResult.face(1))
+anExtrusionFt.string("CreationMethod").setValue("BySizes")
+anExtrusionFt.real("to_size").setValue(50)
+anExtrusionFt.real("from_size").setValue(0)
+anExtrusionFt.real("to_offset").setValue(0) #TODO: remove
+anExtrusionFt.real("from_offset").setValue(0) #TODO: remove
+anExtrusionFt.execute()
+aSession.finishOperation()
+assert (anExtrusionFt.real("to_size").value() == 50.0)
+
+# Check extrusion results
+assert (len(anExtrusionFt.results()) > 0)
+anExtrusionResult = modelAPI_ResultBody(anExtrusionFt.firstResult())
+assert (anExtrusionResult is not None)
+
+#=========================================================================
+# Test placement by edge - edge
+#=========================================================================
+aSession.startOperation()
+aPlacementFt = aPart.addFeature("Placement")
+aPlacementFt.selectionList("placement_objects_list").append(anExtrusionResult, anExtrusionResult.shape())
+aPlacementFt.selection("placement_start_shape").selectSubShape("edge", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4][Extrusion_1_1/To_Face]")
+aPlacementFt.selection("placement_end_shape").selectSubShape("edge", "[Extrusion_1_2/Generated_Face&Sketch_1/SketchLine_7][Extrusion_1_2/To_Face]")
+aPlacementFt.boolean("placement_reverse_direction").setValue(False)
+aPlacementFt.boolean("placement_centering").setValue(True)
+aPlacementFt.execute()
+aSession.finishOperation()
+
+# Check placement results
+assert (len(aPlacementFt.results()) > 0)
+aPlacementResult = modelAPI_ResultBody(aPlacementFt.firstResult())
+assert (aPlacementResult is not None)
+aSession.finishOperation()
+
+from salome.shaper import model
+assert(model.checkPythonDump())
