--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+ParamR = model.addParameter(Part_1_doc, "R", "50")
+ParamFrom = model.addParameter(Part_1_doc, "offsetFrom", "0")
+ParamTo = model.addParameter(Part_1_doc, "offsetTo", "0")
+Cone_1 = model.addCone(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), "R", "R/5", "R")
+Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Cone_1_1"), model.selection("FACE", "PartSet/XOZ")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOZ"), 20, False)
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), model.selection("EDGE", "PartSet/OZ"), 330)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
+SketchLine_1 = Sketch_1.addLine(10, 8.819660112501044, 10, 30)
+SketchLine_2 = Sketch_1.addLine(10, 30, -11.18033988749895, 30)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
+SketchArc_1 = Sketch_1.addArc(0, 20, -11.18033988749895, 30, 10, 8.819660112501044, False)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_1.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
+SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_1.result(), SketchLine_2.result())
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_1.result(), 10, True)
+SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 15)
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_3 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_3.result())
+SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Line(SketchLine_3).startPoint(), SketchArc_1.center(), 20)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchArc_1_2f")], model.selection(), model.selection("FACE", "Partition_1_1_2/Modified_Face&Cone_1_1/Face_1"), "offsetTo", model.selection("FACE", "Plane_2"), "offsetFrom")
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [5])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [20])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [40])
+model.testResultsVolumes(Extrusion_1, [31363.4963946])
+
+# change radius of sphere and check failure
+ParamR.setValue(10)
+model.do()
+assert(Extrusion_1.feature().error() != "")
+
+# revert failure, check the intersected boundaries are processed well
+ParamR.setValue(40)
+model.do()
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [5])
+model.testResultsVolumes(Extrusion_1, [25645.0102138])
+
+# change offsetting "To" face and check failure
+ParamTo.setValue(-20)
+model.do()
+assert(Extrusion_1.feature().error() != "")
+
+# revert failure
+ParamTo.setValue(8)
+model.do()
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [5])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [20])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [40])
+model.testResultsVolumes(Extrusion_1, [31501.9671234])
+
+# offset "From" face
+ParamFrom.setValue(-20)
+model.do()
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [5])
+model.testResultsVolumes(Extrusion_1, [18737.752452])
+
+ParamFrom.setValue(20)
+model.do()
+model.testNbResults(Extrusion_1, 1)
+model.testNbSubResults(Extrusion_1, [0])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [5])
+model.testResultsVolumes(Extrusion_1, [44266.1817647])
+
+model.testHaveNamingSubshapes(Extrusion_1, model, Part_1_doc)
+
+model.end()
+
+assert(model.checkPythonDump())
