--- /dev/null
+# Copyright (C) 2020 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(10.19197853506727, -21.07109716039953, 30.19197853506727, -21.07109716039953)
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchLine_2 = Sketch_1.addLine(30.19197853506727, -21.07109716039953, 30.19197853506727, -6.071097160399531)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchLine_3 = Sketch_1.addLine(30.19197853506727, -6.071097160399531, 20.19197853506727, -6.071097160399531)
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchLine_4 = Sketch_1.addLine(20.19197853506727, -6.071097160399531, 20.19197853506727, 8.928902839600468)
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(20.19197853506727, 8.928902839600468, 30.19197853506727, 8.928902839600468)
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchLine_6 = Sketch_1.addLine(30.19197853506727, 8.928902839600468, 30.19197853506727, 18.92890283960047)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchLine_7 = Sketch_1.addLine(30.19197853506727, 18.92890283960047, 10.19197853506727, 18.92890283960047)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchLine_8 = Sketch_1.addLine(10.19197853506727, 18.92890283960047, 10.19197853506727, -21.07109716039953)
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.endPoint())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
+SketchConstraintVertical_3.setName("SketchConstraintVertical_4")
+SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_2.result(), SketchLine_6.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 20)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_8.result(), 40)
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_2.result(), 15)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_6.result(), 10)
+SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_3.result(), 10)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f")], model.selection(), 10, 0)
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"))
+SketchLine_9 = Sketch_2.addLine(30.19197853506727, 5, 25.19197853506727, 5)
+SketchLine_10 = Sketch_2.addLine(25.19197853506727, 5, 25.19197853506727, 10)
+SketchLine_11 = Sketch_2.addLine(25.19197853506727, 10, 30.19197853506727, 10)
+SketchLine_12 = Sketch_2.addLine(30.19197853506727, 10, 30.19197853506727, 5)
+SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_9.startPoint())
+SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
+SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
+SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_9.result())
+SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_10.result())
+SketchConstraintVertical_4.setName("SketchConstraintVertical_5")
+SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_11.result())
+SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_12.result())
+SketchConstraintVertical_5.setName("SketchConstraintVertical_6")
+SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]"), False)
+SketchPoint_1 = SketchProjection_1.createdFeature()
+SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchPoint_1.result())
+SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_12.result(), SketchLine_11.result())
+SketchConstraintLength_6 = Sketch_2.setLength(SketchLine_12.result(), 5)
+ExtrusionCut_1.setNestedSketch(Sketch_2)
+Defeaturing_1 = model.addDefeaturing(Part_1_doc, [model.selection("FACE", "ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_10"), model.selection("FACE", "ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_9")])
+model.testHaveNamingSubshapes(Defeaturing_1, model, Part_1_doc)
+model.end()
+
+from GeomAPI import *
+
+model.testNbResults(Defeaturing_1, 1)
+model.testNbSubResults(Defeaturing_1, [0])
+model.testNbSubShapes(Defeaturing_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Defeaturing_1, GeomAPI_Shape.FACE, [10])
+model.testNbSubShapes(Defeaturing_1, GeomAPI_Shape.EDGE, [48])
+model.testNbSubShapes(Defeaturing_1, GeomAPI_Shape.VERTEX, [96])
+model.testResultsVolumes(Defeaturing_1, [6500])
+
+assert(model.checkPythonDump())
