Renaming Fill in Split : Unit tests

[modules/shaper.git] / src / FeaturesPlugin / Test / TestBooleanSplitWithPlane.py

diff --git a/src/FeaturesPlugin/Test/TestBooleanSplitWithPlane.py b/src/FeaturesPlugin/Test/TestBooleanSplitWithPlane.py
new file mode 100644 (file)
index 0000000..4a1f916
--- /dev/null
+++ b/src/FeaturesPlugin/Test/TestBooleanSplitWithPlane.py
@@ -0,0 +1,72 @@
+# Copyright (C) 2014-2019  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+# -*- coding: utf-8 -*-
+
+from GeomAPI import GeomAPI_Pnt
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(50.45430931454487, 141.3050678403047, -211.8625790259634, 141.3050678403047)
+SketchLine_2 = Sketch_1.addLine(-211.8625790259634, 141.3050678403047, -211.8625790259634, -163.3288837233227)
+SketchLine_3 = Sketch_1.addLine(-211.8625790259634, -163.3288837233227, 50.45430931454487, -163.3288837233227)
+SketchLine_4 = Sketch_1.addLine(50.45430931454487, -163.3288837233227, 50.45430931454487, 141.3050678403047)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchLine_5 = Sketch_1.addLine(246.5736143115653, 48.78197815871301, -51.09047583637312, 48.78197815871301)
+SketchLine_6 = Sketch_1.addLine(-51.09047583637312, 48.78197815871301, -51.09047583637312, -104.8260668928192)
+SketchLine_7 = Sketch_1.addLine(-51.09047583637312, -104.8260668928192, 246.5736143115653, -104.8260668928192)
+SketchLine_8 = Sketch_1.addLine(246.5736143115653, -104.8260668928192, 246.5736143115653, 48.78197815871301)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_5.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_7.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_8.result())
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", GeomAPI_Pnt(17.35551764280096, -11.01190794150899, 0))], model.selection(), 100, 0)
+Split_1 = model.addSplit(Part_1_doc, [model.selection("SOLID", GeomAPI_Pnt(-0.3180832609141306, -28.0220443670531, 50.00000000000001))], [model.selection("FACE", "PartSet/YOZ")])
+model.do()
+model.testHaveNamingSubshapes(Split_1, model, Part_1_doc)
+model.end()
+
+from GeomAPI import  GeomAPI_Shape
+
+model.testNbResults(Split_1, 1)
+model.testNbSubResults(Split_1, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.SOLID, [4])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.FACE, [30])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.EDGE, [132])
+model.testNbSubShapes(Split_1, GeomAPI_Shape.VERTEX, [264])
+model.testResultsVolumes(Split_1, [11003613.329450136050581932067871094])
+
+assert(model.checkPythonDump())