--- /dev/null
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+from SketchAPI import *
+
+from salome.shaper import model
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 20)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Cylinder_1_1")], model.selection("EDGE", "PartSet/OX"), 40, 2)
+LinearCopy_2 = model.addMultiTranslation(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+LinearCopy_2.result().subResult(0).subResult(0).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(0).subResult(1).setColor(255, 170, 0)
+LinearCopy_2.result().subResult(1).subResult(0).setColor(0, 0, 255)
+LinearCopy_2.result().subResult(1).subResult(1).setColor(0, 0, 255)
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
+SketchLine_1 = Sketch_1.addLine(7, 0, -7, 0)
+SketchLine_2 = Sketch_1.addLine(-7, 0, -7, 5)
+SketchLine_3 = Sketch_1.addLine(-7, 5, 7, 5)
+SketchLine_4 = Sketch_1.addLine(7, 5, 7, 0)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"), False)
+SketchLine_5 = SketchProjection_1.createdFeature()
+SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_5.result(), 7, True)
+SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_5).startPoint(), SketchLine_1.result())
+SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14)
+SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 5)
+SketchLine_6 = Sketch_1.addLine(5, 12, -5, 12)
+SketchLine_7 = Sketch_1.addLine(-5, 12, -5, 15)
+SketchLine_8 = Sketch_1.addLine(-5, 15, 5, 15)
+SketchLine_9 = Sketch_1.addLine(5, 15, 5, 12)
+SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
+SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
+SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
+SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
+SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
+SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
+SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
+SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_7.result(), 3)
+SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), 10)
+SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_5.result(), 5, True)
+SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), 7, True)
+model.do()
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), 60, 20)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_9r-SketchLine_8r-SketchLine_7r-SketchLine_6r")], model.selection(), 55, 15)
+LinearCopy_3 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], model.selection("EDGE", "PartSet/OY"), 40, 2)
+AngularCopy_1 = model.addMultiRotation(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], model.selection("EDGE", "PartSet/OZ"), 90, 2)
+Compound_1 = model.addCompound(Part_1_doc, [model.selection("COMPOUND", "LinearCopy_3_1"), model.selection("COMPOUND", "AngularCopy_1_1")])
+Compound_1.result().subResult(0).subResult(0).setColor(0, 170, 0)
+Compound_1.result().subResult(0).subResult(1).setColor(0, 170, 0)
+Compound_1.result().subResult(1).subResult(0).setColor(0, 255, 0)
+Compound_1.result().subResult(1).subResult(1).setColor(0, 255, 0)
+Fuse_1_objects_1 = [model.selection("SOLID", "LinearCopy_2_1_1_1"), model.selection("SOLID", "Compound_1_1_1_1"), model.selection("COMPOUND", "Compound_1_1_2")]
+Fuse_1 = model.addFuse(Part_1_doc, Fuse_1_objects_1, False, 20190506)
+
+model.testHaveNamingSubshapes(Fuse_1, model, Part_1_doc)
+
+model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Fuse_1, 1)
+model.testNbSubResults(Fuse_1, [4])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.SOLID, [5])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.FACE, [50])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.EDGE, [208])
+model.testNbSubShapes(Fuse_1, GeomAPI_Shape.VERTEX, [416])
+model.testResultsVolumes(Fuse_1, [38109.5099691938])
+
+assert(model.checkPythonDump())
