+++ /dev/null
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="${_dollar}{ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in \
- $(top_srcdir)/adm_local/unix/make_common_starter.am \
- $(top_srcdir)/configure \
- $(top_srcdir)/doc/static/header.html.in AUTHORS COPYING \
- ChangeLog INSTALL NEWS
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = doc/static/header.html
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CORBA_CXXFLAGS = @CORBA_CXXFLAGS@
-CORBA_INCLUDES = @CORBA_INCLUDES@
-CORBA_IN_GUI = @CORBA_IN_GUI@
-CORBA_LIBS = @CORBA_LIBS@
-CORBA_ROOT = @CORBA_ROOT@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOT = @DOT@
-DOXYGEN = @DOXYGEN@
-DOXYGEN_PYTHON_EXTENSION = @DOXYGEN_PYTHON_EXTENSION@
-DOXYGEN_SUPPORT_STL = @DOXYGEN_SUPPORT_STL@
-DOXYGEN_WITH_PYTHON = @DOXYGEN_WITH_PYTHON@
-DOXYGEN_WITH_STL = @DOXYGEN_WITH_STL@
-DVIPS = @DVIPS@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GLOBAL_INSTALL = @GLOBAL_INSTALL@
-GREP = @GREP@
-GUI_CXXFLAGS = @GUI_CXXFLAGS@
-GUI_LDFLAGS = @GUI_LDFLAGS@
-GUI_ROOT_DIR = @GUI_ROOT_DIR@
-IDL = @IDL@
-IDLCXXFLAGS = @IDLCXXFLAGS@
-IDLPYFLAGS = @IDLPYFLAGS@
-IDL_CLN_CXX = @IDL_CLN_CXX@
-IDL_CLN_H = @IDL_CLN_H@
-IDL_CLN_OBJ = @IDL_CLN_OBJ@
-IDL_SRV_CXX = @IDL_SRV_CXX@
-IDL_SRV_H = @IDL_SRV_H@
-IDL_SRV_OBJ = @IDL_SRV_OBJ@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-KERNEL_CXXFLAGS = @KERNEL_CXXFLAGS@
-KERNEL_LDFLAGS = @KERNEL_LDFLAGS@
-KERNEL_ROOT_DIR = @KERNEL_ROOT_DIR@
-KERNEL_SITE_DIR = @KERNEL_SITE_DIR@
-LATEX = @LATEX@
-LDEXPDYNFLAGS = @LDEXPDYNFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIB_LOCATION_SUFFIX = @LIB_LOCATION_SUFFIX@
-LN_S = @LN_S@
-LRELEASE = @LRELEASE@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MOC = @MOC@
-MODULE_NAME = @MODULE_NAME@
-OBJEXT = @OBJEXT@
-OGL_INCLUDES = @OGL_INCLUDES@
-OGL_LIBS = @OGL_LIBS@
-OMNIORB_CXXFLAGS = @OMNIORB_CXXFLAGS@
-OMNIORB_IDL = @OMNIORB_IDL@
-OMNIORB_IDLCXXFLAGS = @OMNIORB_IDLCXXFLAGS@
-OMNIORB_IDLPYFLAGS = @OMNIORB_IDLPYFLAGS@
-OMNIORB_IDL_CLN_CXX = @OMNIORB_IDL_CLN_CXX@
-OMNIORB_IDL_CLN_H = @OMNIORB_IDL_CLN_H@
-OMNIORB_IDL_CLN_OBJ = @OMNIORB_IDL_CLN_OBJ@
-OMNIORB_IDL_SRV_CXX = @OMNIORB_IDL_SRV_CXX@
-OMNIORB_IDL_SRV_H = @OMNIORB_IDL_SRV_H@
-OMNIORB_IDL_SRV_OBJ = @OMNIORB_IDL_SRV_OBJ@
-OMNIORB_IDL_TIE_CXX = @OMNIORB_IDL_TIE_CXX@
-OMNIORB_IDL_TIE_H = @OMNIORB_IDL_TIE_H@
-OMNIORB_INCLUDES = @OMNIORB_INCLUDES@
-OMNIORB_LIBS = @OMNIORB_LIBS@
-OMNIORB_PACOIDLCXXFLAGS = @OMNIORB_PACOIDLCXXFLAGS@
-OMNIORB_ROOT = @OMNIORB_ROOT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PACOIDLCXXFLAGS = @PACOIDLCXXFLAGS@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PDFLATEX = @PDFLATEX@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-PYTHON = @PYTHON@
-PYTHONHOME = @PYTHONHOME@
-PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
-PYTHON_INCLUDES = @PYTHON_INCLUDES@
-PYTHON_LIBS = @PYTHON_LIBS@
-PYTHON_PLATFORM = @PYTHON_PLATFORM@
-PYTHON_PREFIX = @PYTHON_PREFIX@
-PYTHON_SITE = @PYTHON_SITE@
-PYTHON_SITE_EXEC = @PYTHON_SITE_EXEC@
-PYTHON_SITE_INSTALL = @PYTHON_SITE_INSTALL@
-PYTHON_SITE_PACKAGE = @PYTHON_SITE_PACKAGE@
-PYTHON_VERSION = @PYTHON_VERSION@
-QRCC = @QRCC@
-QTDIR = @QTDIR@
-QT_ASSISTANT_INCLUDES = @QT_ASSISTANT_INCLUDES@
-QT_ASSISTANT_LIBS = @QT_ASSISTANT_LIBS@
-QT_CORE_LIBS = @QT_CORE_LIBS@
-QT_GUI_LIBS = @QT_GUI_LIBS@
-QT_INCLUDES = @QT_INCLUDES@
-QT_LIBS = @QT_LIBS@
-QT_LIB_DIR = @QT_LIB_DIR@
-QT_MT_INCLUDES = @QT_MT_INCLUDES@
-QT_MT_LIBS = @QT_MT_LIBS@
-QT_OTHER_LIBS = @QT_OTHER_LIBS@
-QT_ROOT = @QT_ROOT@
-QT_VERSION = @QT_VERSION@
-QT_VERSION_ID = @QT_VERSION_ID@
-RANLIB = @RANLIB@
-ROOT_BUILDDIR = @ROOT_BUILDDIR@
-ROOT_SRCDIR = @ROOT_SRCDIR@
-RST2HTML = @RST2HTML@
-SETX = @SETX@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STDLIB = @STDLIB@
-STRIP = @STRIP@
-TEMP = @TEMP@
-UIC = @UIC@
-VERSION = @VERSION@
-XVERSION = @XVERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-acx_pthread_config = @acx_pthread_config@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = $(prefix)/bin/salome
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-
-# Documentation directory
-docdir = $(datadir)/doc/salome
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = $(prefix)/lib@LIB_LOCATION_SUFFIX@/salome
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pkgpyexecdir = @pkgpyexecdir@
-pkgpythondir = @pkgpythondir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pyexecdir = @pyexecdir@
-pythondir = @pythondir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-
-# ============================================================
-# The following is to avoid PACKAGE_... env variable
-# redefinition compilation warnings
-# ============================================================
-#
-AM_CXXFLAGS = @KERNEL_CXXFLAGS@ -include SALOMEconfig.h
-AM_CPPFLAGS = @KERNEL_CXXFLAGS@ -include SALOMEconfig.h
-
-# ============================================================
-# This file defines the common definitions used in several
-# Makefile. This file must be included, if needed, by the file
-# Makefile.am.
-# ============================================================
-# Standard directory for installation
-#
-salomeincludedir = $(includedir)/salome
-salomescriptdir = $(bindir)
-salomepythondir = $(pythondir)/salome
-salomepyexecdir = $(pyexecdir)/salome
-
-# Directory for installing idl files
-salomeidldir = $(prefix)/idl/salome
-
-# Directory for installing resource files
-salomeresdir = $(prefix)/share/salome/resources/@MODULE_NAME@
-
-# Directories for installing admin files
-admlocaldir = $(prefix)/adm_local
-admlocalunixdir = $(admlocaldir)/unix
-admlocalm4dir = $(admlocaldir)/unix/config_files
-
-# Shared modules installation directory
-sharedpkgpythondir = $(salomepythondir)/shared_modules
-
-# extra distributed files
-EXTRA_DIST = $(MOC_FILES:%_moc.cxx=%.h) $(QRC_FILES:qrc_%.cxx=%.qrc) \
- $(UIC_FILES:ui_%.h=%.ui) $(nodist_salomeres_DATA:%.qm=%.ts) \
- build_configure clean_configure
-
-# -* Makefile *-
-# Author : Patrick GOLDBRONN (CEA)
-# Date : 28/06/2001
-# Modified by : Alexander BORODIN (OCN) - autotools usage
-# $Header:
-#
-ACLOCAL_AMFLAGS = -I adm_local/unix/config_files \
- -I ${KERNEL_ROOT_DIR}/salome_adm/unix/config_files \
- -I ${GUI_ROOT_DIR}/adm_local/unix/config_files
-
-SUBDIRS = idl adm_local resources src bin doc
-DISTCLEANFILES = a.out aclocal.m4 configure local-install.sh hack_libtool
-all: all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/adm_local/unix/make_common_starter.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *${_dollar}dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-doc/static/header.html: $(top_builddir)/config.status $(top_srcdir)/doc/static/header.html.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x ${_dollar}MAKEFLAGS; do \
- case ${_dollar}f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in ${_dollar}list; do \
- echo "Making ${_dollar}target in ${_dollar}subdir"; \
- if test "${_dollar}subdir" = "."; then \
- dot_seen=yes; \
- local_target="${_dollar}target-am"; \
- else \
- local_target="${_dollar}target"; \
- fi; \
- (cd ${_dollar}subdir && $(MAKE) $(AM_MAKEFLAGS) ${_dollar}local_target) \
- || eval ${_dollar}failcom; \
- done; \
- if test "${_dollar}dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "${_dollar}target-am" || exit 1; \
- fi; test -z "${_dollar}fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
- for f in x ${_dollar}MAKEFLAGS; do \
- case ${_dollar}f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in ${_dollar}list; do \
- if test "${_dollar}subdir" = "."; then :; else \
- rev="${_dollar}subdir ${_dollar}rev"; \
- fi; \
- done; \
- rev="${_dollar}rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in ${_dollar}rev; do \
- echo "Making ${_dollar}target in ${_dollar}subdir"; \
- if test "${_dollar}subdir" = "."; then \
- local_target="${_dollar}target-am"; \
- else \
- local_target="${_dollar}target"; \
- fi; \
- (cd ${_dollar}subdir && $(MAKE) $(AM_MAKEFLAGS) ${_dollar}local_target) \
- || eval ${_dollar}failcom; \
- done && test -z "${_dollar}fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in ${_dollar}list; do \
- test "${_dollar}subdir" = . || (cd ${_dollar}subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in ${_dollar}list; do \
- test "${_dollar}subdir" = . || (cd ${_dollar}subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in ${_dollar}list; do \
- if test -f "${_dollar}i"; then echo ${_dollar}i; else echo $(srcdir)/${_dollar}i; fi; \
- done | \
- $(AWK) ' { files[${_dollar}0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID ${_dollar}unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in ${_dollar}list; do \
- if test "${_dollar}subdir" = .; then :; else \
- test ! -f ${_dollar}subdir/TAGS || \
- tags="${_dollar}tags ${_dollar}include_option=${_dollar}here/${_dollar}subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in ${_dollar}list; do \
- if test -f "${_dollar}i"; then echo ${_dollar}i; else echo $(srcdir)/${_dollar}i; fi; \
- done | \
- $(AWK) ' { files[${_dollar}0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)${_dollar}tags${_dollar}unique"; then :; else \
- test -n "${_dollar}unique" || unique=${_dollar}empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- ${_dollar}tags ${_dollar}unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in ${_dollar}list; do \
- if test -f "${_dollar}i"; then echo ${_dollar}i; else echo $(srcdir)/${_dollar}i; fi; \
- done | \
- $(AWK) ' { files[${_dollar}0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)${_dollar}tags${_dollar}unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- ${_dollar}tags ${_dollar}unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) ${_dollar}here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^${_dollar}\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^${_dollar}\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in ${_dollar}list; do echo ${_dollar}file; done | \
- sed -e "s|^${_dollar}srcdirstrip/||;t" \
- -e "s|^${_dollar}topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case ${_dollar}dist_files in \
- */*) $(MKDIR_P) `echo "${_dollar}dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*${_dollar},,' | \
- sort -u` ;; \
- esac; \
- for file in ${_dollar}dist_files; do \
- if test -f ${_dollar}file || test -d ${_dollar}file; then d=.; else d=$(srcdir); fi; \
- if test -d ${_dollar}d/${_dollar}file; then \
- dir=`echo "/${_dollar}file" | sed -e 's,/[^/]*${_dollar},,'`; \
- if test -d $(srcdir)/${_dollar}file && test ${_dollar}d != $(srcdir); then \
- cp -pR $(srcdir)/${_dollar}file $(distdir)${_dollar}dir || exit 1; \
- fi; \
- cp -pR ${_dollar}d/${_dollar}file $(distdir)${_dollar}dir || exit 1; \
- else \
- test -f $(distdir)/${_dollar}file \
- || cp -p ${_dollar}d/${_dollar}file $(distdir)/${_dollar}file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in ${_dollar}list; do \
- if test "${_dollar}subdir" = .; then :; else \
- test -d "$(distdir)/${_dollar}subdir" \
- || $(MKDIR_P) "$(distdir)/${_dollar}subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd ${_dollar}subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="${_dollar}top_distdir" \
- distdir="${_dollar}distdir/${_dollar}subdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="${_dollar}{TMPDIR-/tmp}/am-dc-${_dollar}${_dollar}/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="${_dollar}dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="${_dollar}dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "${_dollar}dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "${_dollar}dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="${_dollar}dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="${_dollar}dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="${_dollar}dc_destdir" \
- distuninstallcheck_dir="${_dollar}dc_destdir" distuninstallcheck; \
- } || { rm -rf "${_dollar}dc_destdir"; exit 1; }) \
- && rm -rf "${_dollar}dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in ${_dollar}list; do echo ${_dollar}i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '${_dollar}p' -e '${_dollar}x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool \
- distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
- mostlyclean-local
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
- install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-generic \
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
- dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-generic distclean-libtool distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
- tags-recursive uninstall uninstall-am
-
-
-# common rules
-
-# meta object implementation files generation (moc)
-%_moc.cxx: %.h
- $(MOC) $< -o $@
-
-# translation (*.qm) files generation (lrelease)
-%.qm: %.ts
- $(LRELEASE) $< -qm $@
-
-# resource files generation (qrcc)
-qrc_%.cxx: %.qrc
- $(QRCC) $< -o $@ -name $(*F)
-
-# qt forms files generation (uic)
-ui_%.h: %.ui
- $(UIC) -o $@ $<
-
-# customize clean operation
-mostlyclean-local:
- rm -f @builddir@/*_moc.cxx
- rm -f @builddir@/*.qm
- rm -f @builddir@/ui_*.h
- rm -f @builddir@/qrc_*.cxx
-
-# tests
-tests: unittest
-
-unittest: $(UNIT_TEST_PROG)
- @if test "x$(UNIT_TEST_PROG)" != "x"; then \
- $(UNIT_TEST_PROG); \
- fi;
-
-dist-hook:
- rm -rf `find $(distdir) -name CVS`
-
-usr_docs:
- (cd doc && $(MAKE) $(AM_MAKEFLAGS) usr_docs)
-
-docs: usr_docs
-
-dev_docs:
- (cd doc && $(MAKE) $(AM_MAKEFLAGS) dev_docs)
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
