--- /dev/null
+diff -Naur netgen-5.3.1_SRC_orig/Makefile.am netgen-5.3.1_SRC_modif/Makefile.am
+--- netgen-5.3.1_SRC_orig/Makefile.am 2014-08-29 13:55:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/Makefile.am 2019-11-14 16:56:26.946325231 +0300
+@@ -2,7 +2,7 @@
+
+ METASOURCES = AUTO
+
+-SUBDIRS = libsrc ng tutorials doc windows nglib
++SUBDIRS = libsrc nglib #tutorials doc windows nglib
+
+ # TESTS = ng/netgen -batchmode
+
+diff -Naur netgen-5.3.1_SRC_orig/Makefile.in netgen-5.3.1_SRC_modif/Makefile.in
+--- netgen-5.3.1_SRC_orig/Makefile.in 2014-10-06 15:04:37.000000000 +0400
++++ netgen-5.3.1_SRC_modif/Makefile.in 2019-11-14 16:56:20.582503364 +0300
+@@ -280,7 +280,7 @@
+ top_srcdir = @top_srcdir@
+ ACLOCAL_AMFLAGS = -I m4
+ METASOURCES = AUTO
+-SUBDIRS = libsrc ng tutorials doc windows nglib
++SUBDIRS = libsrc nglib #tutorials doc windows nglib
+ all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+diff -Naur netgen-5.3.1_SRC_orig/configure.ac netgen-5.3.1_SRC_modif/configure.ac
+--- netgen-5.3.1_SRC_orig/configure.ac 2014-10-06 15:00:17.000000000 +0400
++++ netgen-5.3.1_SRC_modif/configure.ac 2019-11-14 16:56:25.406368338 +0300
+@@ -20,7 +20,7 @@
+ CXXFLAGS="$CXXFLAGS $OPENMP_CXXFLAGS"
+ # LDFLAGS="$LDFLAGS $OPENMP_CXXFLAGS"
+
+-AM_PROG_AR
++m4_ifdef([AM_PROG_AR], [AM_PROG_AR])
+ AC_PROG_LIBTOOL
+ LT_INIT
+
+@@ -42,8 +42,8 @@
+
+ if test a$occon = atrue ; then
+
+- AC_SUBST([OCCFLAGS], ["-DOCCGEOMETRY -I$occdir/inc -I/usr/include/opencascade"])
+- AC_SUBST([OCCLIBS], ["-L$occdir/lib -lTKernel -lTKGeomBase -lTKMath -lTKG2d -lTKG3d -lTKXSBase -lTKOffset -lTKFillet -lTKShHealing -lTKMesh -lTKMeshVS -lTKTopAlgo -lTKGeomAlgo -lTKBool -lTKPrim -lTKBO -lTKIGES -lTKBRep -lTKSTEPBase -lTKSTEP -lTKSTL -lTKSTEPAttr -lTKSTEP209 -lTKXDESTEP -lTKXDEIGES -lTKXCAF -lTKLCAF -lFWOSPlugin"])
++ AC_SUBST([OCCFLAGS], ["-DOCCGEOMETRY -I$occdir/include/opencascade"])
++ AC_SUBST([OCCLIBS], ["-L$occdir/lib -lTKernel -lTKGeomBase -lTKMath -lTKG2d -lTKG3d -lTKXSBase -lTKOffset -lTKFillet -lTKShHealing -lTKMesh -lTKMeshVS -lTKTopAlgo -lTKGeomAlgo -lTKBool -lTKPrim -lTKBO -lTKIGES -lTKBRep -lTKSTEPBase -lTKSTEP -lTKSTL -lTKSTEPAttr -lTKSTEP209 -lTKXDESTEP -lTKXDEIGES -lTKXCAF -lTKLCAF"])
+
+ # -lTKDCAF
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/csg/Makefile.am netgen-5.3.1_SRC_modif/libsrc/csg/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/csg/Makefile.am 2014-08-29 13:54:06.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/csg/Makefile.am 2019-11-14 16:56:23.050434285 +0300
+@@ -8,7 +8,7 @@
+ AM_CPPFLAGS = -I$(top_srcdir)/libsrc/include $(TCL_INCLUDES)
+ METASOURCES = AUTO
+
+-lib_LTLIBRARIES = libcsg.la
++noinst_LTLIBRARIES = libcsg.la
+
+
+ libcsg_la_SOURCES = algprim.cpp brick.cpp \
+@@ -17,12 +17,9 @@
+ manifold.cpp meshsurf.cpp polyhedra.cpp revolution.cpp singularref.cpp \
+ solid.cpp specpoin.cpp spline3d.cpp surface.cpp triapprox.cpp
+
+-libcsg_la_LIBADD = $(top_builddir)/libsrc/meshing/libmesh.la
+-
+-
+
+ if NGGUI
+-lib_LTLIBRARIES += libcsgvis.la
++lib_LTLIBRARIES = libcsgvis.la
+
+ libcsgvis_la_SOURCES = vscsg.cpp csgpkg.cpp
+ libcsgvis_la_LIBADD = libcsg.la
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/general/parthreads.cpp netgen-5.3.1_SRC_modif/libsrc/general/parthreads.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/general/parthreads.cpp 2014-08-29 13:54:06.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/general/parthreads.cpp 2019-11-14 16:56:21.462478733 +0300
+@@ -1,40 +1,40 @@
+-/**************************************************************************/\r
+-/* File: parthreads.cpp */\r
+-/* Author: Joachim Schoeberl */\r
+-/* Date: 01. Jun. 95 */\r
+-/**************************************************************************/\r
+-\r
+-\r
+-#include <mystdlib.h>\r
+-#include <myadt.hpp>\r
+-\r
+-/*\r
+-\r
+-namespace netgen\r
+-{\r
+- using namespace netgen;\r
+-\r
+-#ifdef WIN32\r
+-\r
+- NgLock :: NgLock (NgMutex & mut)\r
+- : sl(&mut.cs)\r
+- {\r
+- ;\r
+- }\r
+-\r
+- void NgLock :: Lock ()\r
+- {\r
+- sl.Lock();\r
+- }\r
+- void NgLock :: UnLock ()\r
+- {\r
+- sl.Unlock();\r
+- }\r
+-\r
+-\r
+-#else\r
+-\r
+-#endif\r
+-}\r
+-\r
+-*/\r
++/**************************************************************************/
++/* File: parthreads.cpp */
++/* Author: Joachim Schoeberl */
++/* Date: 01. Jun. 95 */
++/**************************************************************************/
++
++
++#include <mystdlib.h>
++#include <myadt.hpp>
++
++/*
++
++namespace netgen
++{
++ using namespace netgen;
++
++#ifdef WIN32
++
++ NgLock :: NgLock (NgMutex & mut)
++ : sl(&mut.cs)
++ {
++ ;
++ }
++
++ void NgLock :: Lock ()
++ {
++ sl.Lock();
++ }
++ void NgLock :: UnLock ()
++ {
++ sl.Unlock();
++ }
++
++
++#else
++
++#endif
++}
++
++*/
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/geom2d/Makefile.am netgen-5.3.1_SRC_modif/libsrc/geom2d/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/geom2d/Makefile.am 2014-08-29 13:54:06.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/geom2d/Makefile.am 2019-11-14 16:56:22.570447721 +0300
+@@ -4,16 +4,15 @@
+
+ METASOURCES = AUTO
+
+-lib_LTLIBRARIES = libgeom2d.la
++noinst_LTLIBRARIES = libgeom2d.la
+
+ if NGGUI
+-lib_LTLIBRARIES += libgeom2dvis.la
++lib_LTLIBRARIES = libgeom2dvis.la
+ endif
+
+
+
+ libgeom2d_la_SOURCES = genmesh2d.cpp geom2dmesh.cpp geometry2d.cpp
+-libgeom2d_la_LIBADD = $(top_builddir)/libsrc/meshing/libmesh.la
+
+ libgeom2dvis_la_SOURCES = geom2dpkg.cpp vsgeom2d.cpp
+ libgeom2dvis_la_LIBADD = libgeom2d.la
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/interface/Makefile.am netgen-5.3.1_SRC_modif/libsrc/interface/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/interface/Makefile.am 2014-08-29 13:54:02.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/interface/Makefile.am 2019-11-14 16:56:23.298427343 +0300
+@@ -2,14 +2,11 @@
+
+ AM_CPPFLAGS = -I$(top_srcdir)/libsrc/include -I$(top_srcdir)/libsrc/interface $(MPI_INCLUDES) $(TCL_INCLUDES) -DOPENGL
+ METASOURCES = AUTO
+-lib_LTLIBRARIES = libinterface.la
++noinst_LTLIBRARIES = libinterface.la
+ libinterface_la_SOURCES = nginterface.cpp nginterface_v2.cpp \
+ read_fnf_mesh.cpp readtetmesh.cpp readuser.cpp writeabaqus.cpp writediffpack.cpp \
+ writedolfin.cpp writeelmer.cpp writefeap.cpp writefluent.cpp writegmsh.cpp writejcm.cpp \
+ writepermas.cpp writetecplot.cpp writetet.cpp writetochnog.cpp writeuser.cpp \
+ wuchemnitz.cpp writegmsh2.cpp writeOpenFOAM15x.cpp
+
+-
+-libinterface_la_LIBADD = $(top_builddir)/libsrc/meshing/libmesh.la
+-
+ # libinterface_la_LDFLAGS = -rdynamic
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/interface/writeOpenFOAM15x.cpp netgen-5.3.1_SRC_modif/libsrc/interface/writeOpenFOAM15x.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/interface/writeOpenFOAM15x.cpp 2014-08-29 13:54:02.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/interface/writeOpenFOAM15x.cpp 2019-11-14 16:56:23.286427679 +0300
+@@ -1,811 +1,811 @@
+-/*! \file writeOpenFOAM15x.cpp\r
+-* \brief Export Netgen Mesh in the OpenFOAM 1.5+ File format\r
+-* \author Philippose Rajan\r
+-* \date 25 October 2009\r
+-*\r
+-* This function extends the export capabilities of\r
+-* Netgen to include the OpenFOAM 1.5+ File Format.\r
+-*\r
+-* The OpenFOAM 1.5+ mesh format consists of a set of 5 files \r
+-* which together define the mesh points, faces, cells and \r
+-* boundary conditions. \r
+-*\r
+-* The files are:\r
+-* 1. points -> A list of the point co-ordinates\r
+-* 2. faces -> A list of the faces with format <n>(pnt_ind1 pnt_ind2 .... pnt_ind<n>)\r
+-* 3. owner -> The owner cell of each face \r
+-* 4. neighbour -> The neighbour cell of each face\r
+-* 5. boundary -> The set of boundaries with name, start face, and num. of faces\r
+-*\r
+-* For a detailed description of the format, refer to the following link:\r
+-* http://openfoamwiki.net/index.php/Write_OpenFOAM_meshes\r
+-*\r
+-*/\r
+-\r
+-#include <mystdlib.h>\r
+-\r
+-#include <myadt.hpp>\r
+-#include <linalg.hpp>\r
+-#include <csg.hpp>\r
+-#include <meshing.hpp>\r
+-#include <sys/stat.h>\r
+-\r
+-\r
+-namespace netgen\r
+-{\r
+-#include "writeuser.hpp"\r
+-\r
+- // Global arrays used to maintain the owner, neighbour and face lists \r
+- // so that they are accessible across functions\r
+- static Array<int> owner_facelist;\r
+- static Array<int> owner_celllist;\r
+- static Array<int> neighbour_celllist;\r
+- static Array<int> surfelem_bclist;\r
+- static Array<INDEX_2> surfelem_lists;\r
+-\r
+-\r
+-\r
+- static void WriteOpenFOAM15xBanner(ostream * outfile)\r
+- {\r
+- static char FOAMversion[4] = "1.5";\r
+- static char spaces[40];\r
+-\r
+- memset(spaces, ' ', 40);\r
+- spaces[38 - strlen(FOAMversion)] = '\0';\r
+- \r
+- *outfile << \r
+- "/*--------------------------------*- C++ -*----------------------------------*\\\n";\r
+-\r
+- *outfile <<\r
+- "| ========= | |\n"\r
+- "| \\\\ / F ield | OpenFOAM: The Open Source CFD Toolbox |\n"\r
+- "| \\\\ / O peration | Version: " << FOAMversion << spaces << "|\n"\r
+- "| \\\\ / A nd | Web: http://www.OpenFOAM.org |\n"\r
+- "| \\\\/ M anipulation | |\n"\r
+- "\\*---------------------------------------------------------------------------*/\n";\r
+-\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteOpenFOAM15xDividerStart(ostream * outfile)\r
+- {\r
+- *outfile <<\r
+- "// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //\n";\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteOpenFOAM15xDividerEnd(ostream * outfile)\r
+- {\r
+- *outfile <<\r
+- "// ************************************************************************* //\n";\r
+- }\r
+-\r
+-\r
+-\r
+- static bool BuildOwnerNeighbourLists (const Mesh & mesh)\r
+- {\r
+- // Clear all the arrays\r
+- owner_facelist.DeleteAll();\r
+- owner_celllist.DeleteAll();\r
+- neighbour_celllist.DeleteAll();\r
+- surfelem_bclist.DeleteAll();\r
+- surfelem_lists.DeleteAll();\r
+-\r
+- const MeshTopology& meshtopo = mesh.GetTopology();\r
+- \r
+- // Update the mesh topology structures\r
+- const_cast<MeshTopology&> (meshtopo).SetBuildEdges(true);\r
+- const_cast<MeshTopology&> (meshtopo).SetBuildFaces(true);\r
+- const_cast<MeshTopology&> (meshtopo).Update();\r
+-\r
+- // Extract important mesh metrics\r
+- int ne = mesh.GetNE();\r
+- int nse = mesh.GetNSE();\r
+- int totfaces = meshtopo.GetNFaces();\r
+-\r
+- // Preset the size of the arrays to speed up future operations\r
+- // Number of internal faces = total faces - num. of surface faces\r
+- owner_facelist.SetSize(totfaces - nse);\r
+- owner_celllist.SetSize(totfaces - nse);\r
+- neighbour_celllist.SetSize(totfaces - nse);\r
+- surfelem_bclist.SetSize(nse);\r
+- surfelem_lists.SetSize(nse);\r
+-\r
+- // Initialise arrays to zero if required\r
+- neighbour_celllist = 0;\r
+-\r
+- // Array used to keep track of Faces which have already been \r
+- // processed and added to the Owner list... In addition, also the \r
+- // location where the face appears in the Owner list is also stored \r
+- // to speed up creation of the Neighbour list\r
+- Array<int> ownerfaces(totfaces);\r
+- ownerfaces = 0;\r
+-\r
+- // Array to hold the set of local faces of each volume element \r
+- // while running through the set of volume elements\r
+- // NOTE: The size is set automatically by the Netgen topology function\r
+- Array<int> locfaces;\r
+-\r
+- // Secondary indices used to independently advance the owner \r
+- // and boundary condition arrays within the main loop\r
+- int owner_ind = 1;\r
+- int bc_ind = 1;\r
+-\r
+- // Loop through all the volume elements\r
+- for(int elind = 1; elind <= ne; elind++)\r
+- {\r
+- // Extract the current volume element\r
+- // const Element & el = mesh.VolumeElement(elind);\r
+-\r
+- // Get the face numbers of the faces of the current volume element\r
+- // The values returned are given a sign depending on the orientation \r
+- // of the faces. This is used while writing the faces file, to \r
+- // determine whether or not to invert the face triangle before writing \r
+- // it to file\r
+- meshtopo.GetElementFaces(elind,locfaces,true);\r
+-\r
+- // Loop through the faces\r
+- for(int i = 1; i <= locfaces.Size(); i++)\r
+- {\r
+- // The absolute value of a face number (because the faces \r
+- // returned by the GetElementFaces function prepend it \r
+- // with a sign depending on the face orientation)\r
+- int absfacenr = abs(locfaces.Elem(i));\r
+-\r
+- // If the face already exists in the owner list, add \r
+- // the current cell into the neighbour list, in the \r
+- // same location where the face appears in the owner list\r
+- int owner_face = ownerfaces.Elem(absfacenr);\r
+- if(owner_face)\r
+- {\r
+- neighbour_celllist.Elem(owner_face) = elind;\r
+-\r
+- // From this point on, the code within this "if" block \r
+- // basically sorts the order of the the Neighbour cells (along \r
+- // with the faces list) in ascending order.\r
+- // The approach used is..... to traverse the owner and neighbour cell lists\r
+- // up and down, and sort the neighbour cells of a given owner cell \r
+- // as the list evolves.\r
+- // NOTE: A value of "zero" in the neighbour list implies that \r
+- // the neighbour has not been found yet, so the "zero" locations need \r
+- // to be skipped while sorting in ascending order\r
+- int curr_owner = owner_celllist.Elem(owner_face);\r
+-\r
+- int peek_loc = owner_face - 1;\r
+- int new_loc = owner_face;\r
+-\r
+- // Traversing upwards in the list\r
+- while((owner_celllist.Elem(peek_loc) == curr_owner) && (peek_loc >= 1))\r
+- {\r
+- if((neighbour_celllist.Elem(peek_loc) != 0) \r
+- && (neighbour_celllist.Elem(new_loc) < neighbour_celllist.Elem(peek_loc)))\r
+- {\r
+- Swap(neighbour_celllist.Elem(new_loc),neighbour_celllist.Elem(peek_loc));\r
+- Swap(owner_facelist.Elem(new_loc),owner_facelist.Elem(peek_loc));\r
+- new_loc = peek_loc;\r
+- }\r
+-\r
+- peek_loc--;\r
+- }\r
+-\r
+- peek_loc = owner_face + 1;\r
+-\r
+- // Traversing downwards in the list\r
+- while((owner_celllist.Elem(peek_loc) == curr_owner) && (peek_loc <= owner_ind))\r
+- {\r
+- if((neighbour_celllist.Elem(peek_loc) != 0) \r
+- && (neighbour_celllist.Elem(new_loc) > neighbour_celllist.Elem(peek_loc)))\r
+- {\r
+- Swap(neighbour_celllist.Elem(new_loc),neighbour_celllist.Elem(peek_loc));\r
+- Swap(owner_facelist.Elem(new_loc),owner_facelist.Elem(peek_loc));\r
+- new_loc = peek_loc;\r
+- }\r
+-\r
+- peek_loc++;\r
+- }\r
+-\r
+- continue;\r
+- }\r
+-\r
+- // Check if the face is a surface element (boundary face)\r
+- // if not, add the current volume element and the corresponding face into \r
+- // the owner list\r
+- int surfelem = meshtopo.GetFace2SurfaceElement(absfacenr);\r
+- if(!surfelem)\r
+- {\r
+- // If it is a new face which has not been listed before, \r
+- // add the current cell into the owner list, and save \r
+- // the index location to be used later by the neighbour list\r
+- owner_celllist.Elem(owner_ind) = elind;\r
+- owner_facelist.Elem(owner_ind) = locfaces.Elem(i);\r
+- // Update the array to indicate that the face is already processed\r
+- ownerfaces.Elem(absfacenr) = owner_ind;\r
+-\r
+- owner_ind++;\r
+- }\r
+- // If the face is a boundary face, extract the boundary condition number of the \r
+- // face, and append that along with the face number and the current cell \r
+- // into the various surface elements lists\r
+- else\r
+- {\r
+- Element2d sel = mesh.SurfaceElement(surfelem);\r
+- surfelem_bclist.Elem(bc_ind) = mesh.GetFaceDescriptor(sel.GetIndex()).BCProperty();\r
+- surfelem_lists.Elem(bc_ind) = INDEX_2(locfaces.Elem(i),elind);\r
+-\r
+- bc_ind++;\r
+- }\r
+- }\r
+- }\r
+-\r
+- // This correction is required in cases where the mesh has been "uniform refined".... for \r
+- // some reason, the number of faces reported by Netgen is higher than the actual number \r
+- // of faces in the mesh\r
+- owner_facelist.SetSize(owner_ind-1);\r
+- owner_celllist.SetSize(owner_ind-1);\r
+- neighbour_celllist.SetSize(owner_ind-1);\r
+-\r
+-\r
+- // Sort the list of surface elements in ascending order of boundary condition number\r
+- // also sort the cell list in the same manner\r
+- QuickSort(surfelem_bclist,surfelem_lists);\r
+-\r
+-/* \r
+- // Debugging output to a file \r
+- ofstream dbg("OpenFOAMDebug.log");\r
+-\r
+- dbg << " ------- Boundary List -------- \n";\r
+-\r
+- for(int i = 1; i <= surfelem_bclist.Size(); i++)\r
+- {\r
+- dbg << "bc = " << surfelem_bclist.Elem(i) \r
+- << " : face = " << surfelem_lists.Elem(i).I1()\r
+- << " : cell = " << surfelem_lists.Elem(i).I2() << "\n";\r
+- }\r
+-\r
+- dbg << "\n ------- Owner / Face / Neighbour List ------- \n";\r
+-\r
+- for(int i = 1; i <= owner_celllist.Size(); i++)\r
+- {\r
+- dbg << "Ind:" << i << " :: (" \r
+- << owner_celllist.Elem(i) << " "\r
+- << owner_facelist.Elem(i) << " "\r
+- << neighbour_celllist.Elem(i) << ")\n";\r
+- }\r
+-\r
+- dbg.close();\r
+-*/\r
+- return(false);\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteNeighbourFile (ostream * outfile)\r
+- {\r
+- // Write the OpenFOAM standard banner and dividers, etc...\r
+- WriteOpenFOAM15xBanner(outfile);\r
+- *outfile << "FoamFile \n"\r
+- << "{ \n"\r
+- << " version 2.0; \n"\r
+- << " format ascii; \n"\r
+- << " class labelList; \n"\r
+- << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"\r
+- << " location \"constant\\polyMesh\"; \n"\r
+- << " object neighbour; \n"\r
+- << "} \n";\r
+- WriteOpenFOAM15xDividerStart(outfile);\r
+-\r
+- *outfile << "\n\n";\r
+-\r
+- int nneighbours = neighbour_celllist.Size();\r
+-\r
+- *outfile << nneighbours << "\n";\r
+-\r
+- *outfile << "(\n";\r
+-\r
+- // Write the neighbour cells to file\r
+- for(int i = 1; i <= neighbour_celllist.Size(); i++)\r
+- {\r
+- *outfile << neighbour_celllist.Elem(i) - 1 << "\n";\r
+- }\r
+- *outfile << ")\n\n";\r
+- WriteOpenFOAM15xDividerEnd(outfile);\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteOwnerFile (ostream * outfile)\r
+- {\r
+- // Write the OpenFOAM standard banner and dividers, etc...\r
+- WriteOpenFOAM15xBanner(outfile);\r
+- *outfile << "FoamFile \n"\r
+- << "{ \n"\r
+- << " version 2.0; \n"\r
+- << " format ascii; \n"\r
+- << " class labelList; \n"\r
+- << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"\r
+- << " location \"constant\\polyMesh\"; \n"\r
+- << " object owner; \n"\r
+- << "} \n";\r
+- WriteOpenFOAM15xDividerStart(outfile);\r
+-\r
+- *outfile << "\n\n";\r
+-\r
+- int nowners = owner_celllist.Size() + surfelem_lists.Size();\r
+-\r
+- *outfile << nowners << "\n";\r
+-\r
+- *outfile << "(\n";\r
+-\r
+- // Write the owners of the internal cells to file\r
+- for(int i = 1; i <= owner_celllist.Size(); i++)\r
+- {\r
+- *outfile << owner_celllist.Elem(i) - 1 << "\n";\r
+- }\r
+-\r
+- // Write the owners of the boundary cells to file\r
+- // (Written in order of ascending boundary condition numbers)\r
+- for(int i = 1; i <= surfelem_lists.Size(); i++)\r
+- {\r
+- *outfile << surfelem_lists.Elem(i).I2() - 1 << "\n";\r
+- }\r
+- *outfile << ")\n\n";\r
+- WriteOpenFOAM15xDividerEnd(outfile);\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteFacesFile (ostream * outfile, const Mesh & mesh)\r
+- {\r
+- const MeshTopology& meshtopo = mesh.GetTopology();\r
+-\r
+- // Write the OpenFOAM standard banner and dividers, etc...\r
+- WriteOpenFOAM15xBanner(outfile);\r
+- *outfile << "FoamFile \n"\r
+- << "{ \n"\r
+- << " version 2.0; \n"\r
+- << " format ascii; \n"\r
+- << " class faceList; \n"\r
+- << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"\r
+- << " location \"constant\\polyMesh\"; \n"\r
+- << " object faces; \n"\r
+- << "} \n";\r
+- WriteOpenFOAM15xDividerStart(outfile);\r
+-\r
+- *outfile << "\n\n";\r
+-\r
+- int nfaces = owner_facelist.Size() + surfelem_lists.Size();\r
+-\r
+- *outfile << nfaces << "\n";\r
+-\r
+- *outfile << "(\n";\r
+-\r
+- // Array to hold the indices of the points of each face to \r
+- // flip if required \r
+- Array<int> facepnts;\r
+-\r
+- // Write the faces in the order specified in the owners lists of the \r
+- // internal cells and the boundary cells\r
+- for(int i = 1; i <= owner_facelist.Size(); i++)\r
+- {\r
+- int face_w_orientation = owner_facelist.Elem(i);\r
+- int facenr = abs(face_w_orientation);\r
+-\r
+- meshtopo.GetFaceVertices(facenr,facepnts);\r
+-\r
+- // Get the orientation of the face, and invert it if required\r
+- // Since the faces already have the orientation "embedded" into \r
+- // them by means of the prepended sign, only this needs to be \r
+- // checked for...\r
+- if(face_w_orientation > 0)\r
+- {\r
+- int tmppnts = 0;\r
+-\r
+- if(facepnts.Size() == 4)\r
+- {\r
+- tmppnts = facepnts.Elem(1);\r
+- facepnts.Elem(1) = facepnts.Elem(2);\r
+- facepnts.Elem(2) = tmppnts;\r
+- \r
+- tmppnts = facepnts.Elem(3);\r
+- facepnts.Elem(3) = facepnts.Elem(4);\r
+- facepnts.Elem(4) = tmppnts;\r
+- }\r
+- else if(facepnts.Size() == 3)\r
+- {\r
+- tmppnts = facepnts.Elem(1);\r
+- facepnts.Elem(1) = facepnts.Elem(3);\r
+- facepnts.Elem(3) = tmppnts;\r
+- }\r
+- }\r
+-\r
+- *outfile << facepnts.Size();\r
+- *outfile << "(";\r
+- for(int j = 1; j <= facepnts.Size(); j++)\r
+- {\r
+- *outfile << facepnts.Elem(j)-1;\r
+- if(j != facepnts.Size()) *outfile << " ";\r
+- }\r
+- *outfile << ")\n";\r
+- }\r
+-\r
+- // Now append the faces of the surface elements (written in \r
+- // ascending order of boundary condition number) also into \r
+- // the faces file\r
+- for(int i = 1; i <= surfelem_lists.Size(); i++)\r
+- {\r
+- int face_w_orientation = surfelem_lists.Elem(i).I1();\r
+- int facenr = abs(face_w_orientation);\r
+-\r
+- meshtopo.GetFaceVertices(facenr,facepnts);\r
+-\r
+- // Get the orientation of the face, and invert it if required\r
+- if(face_w_orientation > 0)\r
+- {\r
+- int tmppnts = 0;\r
+-\r
+- if(facepnts.Size() == 4)\r
+- {\r
+- tmppnts = facepnts.Elem(1);\r
+- facepnts.Elem(1) = facepnts.Elem(2);\r
+- facepnts.Elem(2) = tmppnts;\r
+- \r
+- tmppnts = facepnts.Elem(3);\r
+- facepnts.Elem(3) = facepnts.Elem(4);\r
+- facepnts.Elem(4) = tmppnts;\r
+- }\r
+- else if(facepnts.Size() == 3)\r
+- {\r
+- tmppnts = facepnts.Elem(1);\r
+- facepnts.Elem(1) = facepnts.Elem(3);\r
+- facepnts.Elem(3) = tmppnts;\r
+- }\r
+- }\r
+-\r
+- *outfile << facepnts.Size();\r
+- *outfile << "(";\r
+- for(int j = 1; j <= facepnts.Size(); j++)\r
+- {\r
+- *outfile << facepnts.Elem(j)-1;\r
+- if(j != facepnts.Size()) *outfile << " ";\r
+- }\r
+- *outfile << ")\n";\r
+- }\r
+-\r
+- *outfile << ")\n\n";\r
+- WriteOpenFOAM15xDividerEnd(outfile);\r
+- }\r
+-\r
+-\r
+- \r
+- static void WritePointsFile (ostream * outfile, const Mesh & mesh)\r
+- {\r
+- int np = mesh.GetNP();\r
+-\r
+- // Write the OpenFOAM standard banner and dividers, etc...\r
+- WriteOpenFOAM15xBanner(outfile);\r
+- *outfile << "FoamFile \n"\r
+- << "{ \n"\r
+- << " version 2.0; \n"\r
+- << " format ascii; \n"\r
+- << " class vectorField; \n"\r
+- << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"\r
+- << " location \"constant\\polyMesh\"; \n"\r
+- << " object points; \n"\r
+- << "} \n";\r
+- WriteOpenFOAM15xDividerStart(outfile);\r
+-\r
+- *outfile << "\n\n";\r
+-\r
+- // Number of points in the following list\r
+- *outfile << np << "\n";\r
+-\r
+- outfile->precision(6);\r
+- outfile->setf (ios::fixed, ios::floatfield);\r
+- outfile->setf (ios::showpoint);\r
+-\r
+- // Coordinate list starts here\r
+- *outfile << "(\n";\r
+-\r
+- for(int i = 1; i <= np; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+-\r
+- // Write coordinates to file\r
+- *outfile << "(";\r
+- *outfile << p.X() << " ";\r
+- *outfile << p.Y() << " ";\r
+- *outfile << p.Z();\r
+- *outfile << ")\n";\r
+- }\r
+- *outfile << ")\n\n";\r
+- WriteOpenFOAM15xDividerEnd(outfile);\r
+- }\r
+-\r
+-\r
+-\r
+- static void WriteBoundaryFile (ostream * outfile)\r
+- {\r
+- // Write the OpenFOAM standard banner and dividers, etc...\r
+- WriteOpenFOAM15xBanner(outfile);\r
+- *outfile << "FoamFile \n"\r
+- << "{ \n"\r
+- << " version 2.0; \n"\r
+- << " format ascii; \n"\r
+- << " class polyBoundaryMesh; \n"\r
+- << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"\r
+- << " location \"constant\\polyMesh\"; \n"\r
+- << " object boundary; \n"\r
+- << "} \n";\r
+- WriteOpenFOAM15xDividerStart(outfile);\r
+-\r
+- *outfile << "\n";\r
+-\r
+-\r
+- Array<INDEX_3> bcarray;\r
+- int ind = 1;\r
+-\r
+- // Since the boundary conditions are already sorted in ascending \r
+- // order, the last element will give the maximum number of possible \r
+- // boundary condition entries\r
+- int bcmax = surfelem_bclist.Elem(surfelem_bclist.Size());\r
+-\r
+- bcarray.SetSize(bcmax+1);\r
+-\r
+- bcarray.Elem(ind) = INDEX_3(surfelem_bclist.Elem(1),1,0);\r
+- \r
+- for(int i = 2; i <= surfelem_bclist.Size(); i++)\r
+- {\r
+- if(surfelem_bclist.Elem(i) == bcarray.Elem(ind).I1())\r
+- {\r
+- bcarray.Elem(ind).I2() = bcarray.Elem(ind).I2()+1;\r
+- }\r
+- else\r
+- {\r
+- ind++;\r
+- bcarray.Elem(ind) = INDEX_3(surfelem_bclist.Elem(i),1,i-1);\r
+- }\r
+- }\r
+-\r
+- bcarray.SetSize(ind);\r
+-\r
+- *outfile << bcarray.Size() << "\n";\r
+- *outfile << "(\n";\r
+-\r
+- int startface = 0;\r
+-\r
+- for(int i = 1; i <= bcarray.Size(); i++)\r
+- {\r
+- startface = owner_celllist.Size() + bcarray.Elem(i).I3();\r
+-\r
+- *outfile << " patch" << bcarray.Elem(i).I1() << "\n"\r
+- << " {\n"\r
+- << " type patch;\n"\r
+- << " physicalType patch;\n"\r
+- << " nFaces " << bcarray.Elem(i).I2() << ";\n"\r
+- << " startFace " << startface << ";\n"\r
+- << " }\n";\r
+- }\r
+-\r
+- *outfile << ")\n\n";\r
+- WriteOpenFOAM15xDividerEnd(outfile);\r
+- }\r
+-\r
+-\r
+-\r
+- void WriteOpenFOAM15xFormat (const Mesh & mesh, const string & casename, const bool compressed)\r
+- {\r
+- bool error = false;\r
+- char casefiles[256];\r
+-\r
+- // Make sure that the mesh data has been updated\r
+- const_cast<Mesh&> (mesh).Compress();\r
+- const_cast<Mesh&> (mesh).CalcSurfacesOfNode();\r
+- const_cast<Mesh&> (mesh).RebuildSurfaceElementLists();\r
+- const_cast<Mesh&> (mesh).BuildElementSearchTree();\r
+-\r
+-\r
+- int np = mesh.GetNP();\r
+- int nse = mesh.GetNSE();\r
+- int ne = mesh.GetNE();\r
+-\r
+- cout << "Write OpenFOAM 1.5+ Mesh Files....\n";\r
+-\r
+- // Abort if there are no points, surface elements or volume elements\r
+- if((np <= 0) || (ne <= 0) || (nse <= 0))\r
+- {\r
+- cout << "Export Error: Invalid mesh.... Aborting!\n";\r
+- return;\r
+- }\r
+-\r
+- // OpenFOAM only supports linear meshes!\r
+- if(mparam.secondorder || mesh.GetCurvedElements().IsHighOrder())\r
+- {\r
+- cout << "Export Error: OpenFOAM 1.5+ does not support non-linear elements.... Aborting!\n";\r
+- return;\r
+- }\r
+-\r
+- if(( (mesh.SurfaceElement(nse/2).GetType() != TRIG) \r
+- && (mesh.SurfaceElement(nse/2).GetType() != QUAD) )\r
+- || (mesh.VolumeElement(ne/2).GetType() == TET10)\r
+- || (mesh.VolumeElement(ne/2).GetType() == PRISM12))\r
+- {\r
+- cout << "Export Error: OpenFOAM 1.5+ does not support non-linear elements.... Aborting!\n";\r
+- return;\r
+- }\r
+-\r
+-\r
+- cout << "Writing OpenFOAM 1.5+ Mesh files to case: " << casename << "\n";\r
+-\r
+- // Create the case directory if it does not already exist\r
+- // NOTE: This needs to be improved for the Linux variant....!!!\r
+- #ifdef WIN32\r
+- char casedir[256];\r
+- sprintf(casedir, "mkdir %s\\constant\\polyMesh", casename.c_str());\r
+- system(casedir);\r
+- #else\r
+- char casedir[256];\r
+- mkdir(casename.c_str(), S_IRWXU|S_IRWXG);\r
+- sprintf(casedir, "%s/constant", casename.c_str());\r
+- mkdir(casedir, S_IRWXU|S_IRWXG);\r
+- sprintf(casedir, "%s/constant/polyMesh", casename.c_str());\r
+- mkdir(casedir, S_IRWXU|S_IRWXG);\r
+- #endif\r
+-\r
+- // Open handles to the five required mesh files\r
+- // points\r
+- // faces\r
+- // owner\r
+- // neighbour\r
+- // boundary\r
+- ostream *outfile_pnts;\r
+- ostream *outfile_faces;\r
+- ostream *outfile_own;\r
+- ostream *outfile_nei;\r
+- ostream *outfile_bnd;\r
+-\r
+- if(compressed)\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/points.gz", casename.c_str());\r
+- outfile_pnts = new ogzstream(casefiles);\r
+- }\r
+- else\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/points", casename.c_str());\r
+- outfile_pnts = new ofstream(casefiles);\r
+- }\r
+-\r
+- if(compressed)\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/faces.gz", casename.c_str());\r
+- outfile_faces = new ogzstream(casefiles);\r
+- }\r
+- else\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/faces", casename.c_str());\r
+- outfile_faces = new ofstream(casefiles);\r
+- }\r
+-\r
+- if(compressed)\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/owner.gz", casename.c_str()); \r
+- outfile_own = new ogzstream(casefiles);\r
+- }\r
+- else\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/owner", casename.c_str()); \r
+- outfile_own = new ofstream(casefiles);\r
+- }\r
+-\r
+- if(compressed)\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/neighbour.gz", casename.c_str());\r
+- outfile_nei = new ogzstream(casefiles);\r
+- }\r
+- else\r
+- {\r
+- sprintf(casefiles, "%s/constant/polyMesh/neighbour", casename.c_str());\r
+- outfile_nei = new ofstream(casefiles);\r
+- }\r
+-\r
+- // Note... the boundary file is not compressed\r
+- sprintf(casefiles, "%s/constant/polyMesh/boundary", casename.c_str()); \r
+- outfile_bnd = new ofstream(casefiles);\r
+-\r
+- ResetTime();\r
+-\r
+- // Build the owner, neighbour, faces and boundary lists \r
+- // from the Netgen mesh\r
+- cout << "\nBuilding Owner, Neighbour and Face Lists: ";\r
+-\r
+- error = BuildOwnerNeighbourLists(mesh);\r
+-\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+-\r
+-\r
+- // Write the "owner" file\r
+- if(outfile_own->good() && !error)\r
+- {\r
+- cout << "Writing the owner file: ";\r
+- WriteOwnerFile(outfile_own);\r
+- delete outfile_own;\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Export Error: Error creating file: owner.... Aborting\n";\r
+- error = true;\r
+- }\r
+-\r
+-\r
+- // Write the "neighbour" file\r
+- if(outfile_nei->good() && !error)\r
+- {\r
+- cout << "Writing the neighbour file: ";\r
+- WriteNeighbourFile(outfile_nei);\r
+- delete outfile_nei;\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Export Error: Error creating file: neighbour.... Aborting\n";\r
+- error = true;\r
+- }\r
+-\r
+-\r
+- // Write the "faces" file\r
+- if(outfile_faces->good() && !error)\r
+- {\r
+- cout << "Writing the faces file: ";\r
+- WriteFacesFile(outfile_faces, mesh);\r
+- delete outfile_faces;\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Export Error: Error creating file: faces.... Aborting\n";\r
+- error = true;\r
+- }\r
+-\r
+-\r
+- // Write the "points" file\r
+- if(outfile_pnts->good() && !error)\r
+- {\r
+- cout << "Writing the points file: ";\r
+- WritePointsFile(outfile_pnts,mesh);\r
+- delete outfile_pnts;\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Export Error: Error creating file: points.... Aborting\n";\r
+- error = true;\r
+- }\r
+-\r
+-\r
+- // Write the "boundary" file\r
+- if(outfile_bnd->good() && !error)\r
+- {\r
+- cout << "Writing the boundary file: ";\r
+- WriteBoundaryFile(outfile_bnd);\r
+- delete outfile_bnd;\r
+- cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Export Error: Error creating file: boundary.... Aborting\n";\r
+- error = true;\r
+- }\r
+-\r
+- if(!error)\r
+- {\r
+- cout << "OpenFOAM 1.5+ Export successfully completed (Time elapsed = " << GetTime() << " sec) !\n";\r
+- }\r
+- else\r
+- {\r
+- cout << "Error in OpenFOAM 1.5+ Export.... Aborted!\n";\r
+- }\r
+- }\r
+-}\r
+-\r
++/*! \file writeOpenFOAM15x.cpp
++* \brief Export Netgen Mesh in the OpenFOAM 1.5+ File format
++* \author Philippose Rajan
++* \date 25 October 2009
++*
++* This function extends the export capabilities of
++* Netgen to include the OpenFOAM 1.5+ File Format.
++*
++* The OpenFOAM 1.5+ mesh format consists of a set of 5 files
++* which together define the mesh points, faces, cells and
++* boundary conditions.
++*
++* The files are:
++* 1. points -> A list of the point co-ordinates
++* 2. faces -> A list of the faces with format <n>(pnt_ind1 pnt_ind2 .... pnt_ind<n>)
++* 3. owner -> The owner cell of each face
++* 4. neighbour -> The neighbour cell of each face
++* 5. boundary -> The set of boundaries with name, start face, and num. of faces
++*
++* For a detailed description of the format, refer to the following link:
++* http://openfoamwiki.net/index.php/Write_OpenFOAM_meshes
++*
++*/
++
++#include <mystdlib.h>
++
++#include <myadt.hpp>
++#include <linalg.hpp>
++#include <csg.hpp>
++#include <meshing.hpp>
++#include <sys/stat.h>
++
++
++namespace netgen
++{
++#include "writeuser.hpp"
++
++ // Global arrays used to maintain the owner, neighbour and face lists
++ // so that they are accessible across functions
++ static Array<int> owner_facelist;
++ static Array<int> owner_celllist;
++ static Array<int> neighbour_celllist;
++ static Array<int> surfelem_bclist;
++ static Array<INDEX_2> surfelem_lists;
++
++
++
++ static void WriteOpenFOAM15xBanner(ostream * outfile)
++ {
++ static char FOAMversion[4] = "1.5";
++ static char spaces[40];
++
++ memset(spaces, ' ', 40);
++ spaces[38 - strlen(FOAMversion)] = '\0';
++
++ *outfile <<
++ "/*--------------------------------*- C++ -*----------------------------------*\\\n";
++
++ *outfile <<
++ "| ========= | |\n"
++ "| \\\\ / F ield | OpenFOAM: The Open Source CFD Toolbox |\n"
++ "| \\\\ / O peration | Version: " << FOAMversion << spaces << "|\n"
++ "| \\\\ / A nd | Web: http://www.OpenFOAM.org |\n"
++ "| \\\\/ M anipulation | |\n"
++ "\\*---------------------------------------------------------------------------*/\n";
++
++ }
++
++
++
++ static void WriteOpenFOAM15xDividerStart(ostream * outfile)
++ {
++ *outfile <<
++ "// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //\n";
++ }
++
++
++
++ static void WriteOpenFOAM15xDividerEnd(ostream * outfile)
++ {
++ *outfile <<
++ "// ************************************************************************* //\n";
++ }
++
++
++
++ static bool BuildOwnerNeighbourLists (const Mesh & mesh)
++ {
++ // Clear all the arrays
++ owner_facelist.DeleteAll();
++ owner_celllist.DeleteAll();
++ neighbour_celllist.DeleteAll();
++ surfelem_bclist.DeleteAll();
++ surfelem_lists.DeleteAll();
++
++ const MeshTopology& meshtopo = mesh.GetTopology();
++
++ // Update the mesh topology structures
++ const_cast<MeshTopology&> (meshtopo).SetBuildEdges(true);
++ const_cast<MeshTopology&> (meshtopo).SetBuildFaces(true);
++ const_cast<MeshTopology&> (meshtopo).Update();
++
++ // Extract important mesh metrics
++ int ne = mesh.GetNE();
++ int nse = mesh.GetNSE();
++ int totfaces = meshtopo.GetNFaces();
++
++ // Preset the size of the arrays to speed up future operations
++ // Number of internal faces = total faces - num. of surface faces
++ owner_facelist.SetSize(totfaces - nse);
++ owner_celllist.SetSize(totfaces - nse);
++ neighbour_celllist.SetSize(totfaces - nse);
++ surfelem_bclist.SetSize(nse);
++ surfelem_lists.SetSize(nse);
++
++ // Initialise arrays to zero if required
++ neighbour_celllist = 0;
++
++ // Array used to keep track of Faces which have already been
++ // processed and added to the Owner list... In addition, also the
++ // location where the face appears in the Owner list is also stored
++ // to speed up creation of the Neighbour list
++ Array<int> ownerfaces(totfaces);
++ ownerfaces = 0;
++
++ // Array to hold the set of local faces of each volume element
++ // while running through the set of volume elements
++ // NOTE: The size is set automatically by the Netgen topology function
++ Array<int> locfaces;
++
++ // Secondary indices used to independently advance the owner
++ // and boundary condition arrays within the main loop
++ int owner_ind = 1;
++ int bc_ind = 1;
++
++ // Loop through all the volume elements
++ for(int elind = 1; elind <= ne; elind++)
++ {
++ // Extract the current volume element
++ // const Element & el = mesh.VolumeElement(elind);
++
++ // Get the face numbers of the faces of the current volume element
++ // The values returned are given a sign depending on the orientation
++ // of the faces. This is used while writing the faces file, to
++ // determine whether or not to invert the face triangle before writing
++ // it to file
++ meshtopo.GetElementFaces(elind,locfaces,true);
++
++ // Loop through the faces
++ for(int i = 1; i <= locfaces.Size(); i++)
++ {
++ // The absolute value of a face number (because the faces
++ // returned by the GetElementFaces function prepend it
++ // with a sign depending on the face orientation)
++ int absfacenr = abs(locfaces.Elem(i));
++
++ // If the face already exists in the owner list, add
++ // the current cell into the neighbour list, in the
++ // same location where the face appears in the owner list
++ int owner_face = ownerfaces.Elem(absfacenr);
++ if(owner_face)
++ {
++ neighbour_celllist.Elem(owner_face) = elind;
++
++ // From this point on, the code within this "if" block
++ // basically sorts the order of the the Neighbour cells (along
++ // with the faces list) in ascending order.
++ // The approach used is..... to traverse the owner and neighbour cell lists
++ // up and down, and sort the neighbour cells of a given owner cell
++ // as the list evolves.
++ // NOTE: A value of "zero" in the neighbour list implies that
++ // the neighbour has not been found yet, so the "zero" locations need
++ // to be skipped while sorting in ascending order
++ int curr_owner = owner_celllist.Elem(owner_face);
++
++ int peek_loc = owner_face - 1;
++ int new_loc = owner_face;
++
++ // Traversing upwards in the list
++ while((owner_celllist.Elem(peek_loc) == curr_owner) && (peek_loc >= 1))
++ {
++ if((neighbour_celllist.Elem(peek_loc) != 0)
++ && (neighbour_celllist.Elem(new_loc) < neighbour_celllist.Elem(peek_loc)))
++ {
++ Swap(neighbour_celllist.Elem(new_loc),neighbour_celllist.Elem(peek_loc));
++ Swap(owner_facelist.Elem(new_loc),owner_facelist.Elem(peek_loc));
++ new_loc = peek_loc;
++ }
++
++ peek_loc--;
++ }
++
++ peek_loc = owner_face + 1;
++
++ // Traversing downwards in the list
++ while((owner_celllist.Elem(peek_loc) == curr_owner) && (peek_loc <= owner_ind))
++ {
++ if((neighbour_celllist.Elem(peek_loc) != 0)
++ && (neighbour_celllist.Elem(new_loc) > neighbour_celllist.Elem(peek_loc)))
++ {
++ Swap(neighbour_celllist.Elem(new_loc),neighbour_celllist.Elem(peek_loc));
++ Swap(owner_facelist.Elem(new_loc),owner_facelist.Elem(peek_loc));
++ new_loc = peek_loc;
++ }
++
++ peek_loc++;
++ }
++
++ continue;
++ }
++
++ // Check if the face is a surface element (boundary face)
++ // if not, add the current volume element and the corresponding face into
++ // the owner list
++ int surfelem = meshtopo.GetFace2SurfaceElement(absfacenr);
++ if(!surfelem)
++ {
++ // If it is a new face which has not been listed before,
++ // add the current cell into the owner list, and save
++ // the index location to be used later by the neighbour list
++ owner_celllist.Elem(owner_ind) = elind;
++ owner_facelist.Elem(owner_ind) = locfaces.Elem(i);
++ // Update the array to indicate that the face is already processed
++ ownerfaces.Elem(absfacenr) = owner_ind;
++
++ owner_ind++;
++ }
++ // If the face is a boundary face, extract the boundary condition number of the
++ // face, and append that along with the face number and the current cell
++ // into the various surface elements lists
++ else
++ {
++ Element2d sel = mesh.SurfaceElement(surfelem);
++ surfelem_bclist.Elem(bc_ind) = mesh.GetFaceDescriptor(sel.GetIndex()).BCProperty();
++ surfelem_lists.Elem(bc_ind) = INDEX_2(locfaces.Elem(i),elind);
++
++ bc_ind++;
++ }
++ }
++ }
++
++ // This correction is required in cases where the mesh has been "uniform refined".... for
++ // some reason, the number of faces reported by Netgen is higher than the actual number
++ // of faces in the mesh
++ owner_facelist.SetSize(owner_ind-1);
++ owner_celllist.SetSize(owner_ind-1);
++ neighbour_celllist.SetSize(owner_ind-1);
++
++
++ // Sort the list of surface elements in ascending order of boundary condition number
++ // also sort the cell list in the same manner
++ QuickSort(surfelem_bclist,surfelem_lists);
++
++/*
++ // Debugging output to a file
++ ofstream dbg("OpenFOAMDebug.log");
++
++ dbg << " ------- Boundary List -------- \n";
++
++ for(int i = 1; i <= surfelem_bclist.Size(); i++)
++ {
++ dbg << "bc = " << surfelem_bclist.Elem(i)
++ << " : face = " << surfelem_lists.Elem(i).I1()
++ << " : cell = " << surfelem_lists.Elem(i).I2() << "\n";
++ }
++
++ dbg << "\n ------- Owner / Face / Neighbour List ------- \n";
++
++ for(int i = 1; i <= owner_celllist.Size(); i++)
++ {
++ dbg << "Ind:" << i << " :: ("
++ << owner_celllist.Elem(i) << " "
++ << owner_facelist.Elem(i) << " "
++ << neighbour_celllist.Elem(i) << ")\n";
++ }
++
++ dbg.close();
++*/
++ return(false);
++ }
++
++
++
++ static void WriteNeighbourFile (ostream * outfile)
++ {
++ // Write the OpenFOAM standard banner and dividers, etc...
++ WriteOpenFOAM15xBanner(outfile);
++ *outfile << "FoamFile \n"
++ << "{ \n"
++ << " version 2.0; \n"
++ << " format ascii; \n"
++ << " class labelList; \n"
++ << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"
++ << " location \"constant\\polyMesh\"; \n"
++ << " object neighbour; \n"
++ << "} \n";
++ WriteOpenFOAM15xDividerStart(outfile);
++
++ *outfile << "\n\n";
++
++ int nneighbours = neighbour_celllist.Size();
++
++ *outfile << nneighbours << "\n";
++
++ *outfile << "(\n";
++
++ // Write the neighbour cells to file
++ for(int i = 1; i <= neighbour_celllist.Size(); i++)
++ {
++ *outfile << neighbour_celllist.Elem(i) - 1 << "\n";
++ }
++ *outfile << ")\n\n";
++ WriteOpenFOAM15xDividerEnd(outfile);
++ }
++
++
++
++ static void WriteOwnerFile (ostream * outfile)
++ {
++ // Write the OpenFOAM standard banner and dividers, etc...
++ WriteOpenFOAM15xBanner(outfile);
++ *outfile << "FoamFile \n"
++ << "{ \n"
++ << " version 2.0; \n"
++ << " format ascii; \n"
++ << " class labelList; \n"
++ << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"
++ << " location \"constant\\polyMesh\"; \n"
++ << " object owner; \n"
++ << "} \n";
++ WriteOpenFOAM15xDividerStart(outfile);
++
++ *outfile << "\n\n";
++
++ int nowners = owner_celllist.Size() + surfelem_lists.Size();
++
++ *outfile << nowners << "\n";
++
++ *outfile << "(\n";
++
++ // Write the owners of the internal cells to file
++ for(int i = 1; i <= owner_celllist.Size(); i++)
++ {
++ *outfile << owner_celllist.Elem(i) - 1 << "\n";
++ }
++
++ // Write the owners of the boundary cells to file
++ // (Written in order of ascending boundary condition numbers)
++ for(int i = 1; i <= surfelem_lists.Size(); i++)
++ {
++ *outfile << surfelem_lists.Elem(i).I2() - 1 << "\n";
++ }
++ *outfile << ")\n\n";
++ WriteOpenFOAM15xDividerEnd(outfile);
++ }
++
++
++
++ static void WriteFacesFile (ostream * outfile, const Mesh & mesh)
++ {
++ const MeshTopology& meshtopo = mesh.GetTopology();
++
++ // Write the OpenFOAM standard banner and dividers, etc...
++ WriteOpenFOAM15xBanner(outfile);
++ *outfile << "FoamFile \n"
++ << "{ \n"
++ << " version 2.0; \n"
++ << " format ascii; \n"
++ << " class faceList; \n"
++ << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"
++ << " location \"constant\\polyMesh\"; \n"
++ << " object faces; \n"
++ << "} \n";
++ WriteOpenFOAM15xDividerStart(outfile);
++
++ *outfile << "\n\n";
++
++ int nfaces = owner_facelist.Size() + surfelem_lists.Size();
++
++ *outfile << nfaces << "\n";
++
++ *outfile << "(\n";
++
++ // Array to hold the indices of the points of each face to
++ // flip if required
++ Array<int> facepnts;
++
++ // Write the faces in the order specified in the owners lists of the
++ // internal cells and the boundary cells
++ for(int i = 1; i <= owner_facelist.Size(); i++)
++ {
++ int face_w_orientation = owner_facelist.Elem(i);
++ int facenr = abs(face_w_orientation);
++
++ meshtopo.GetFaceVertices(facenr,facepnts);
++
++ // Get the orientation of the face, and invert it if required
++ // Since the faces already have the orientation "embedded" into
++ // them by means of the prepended sign, only this needs to be
++ // checked for...
++ if(face_w_orientation > 0)
++ {
++ int tmppnts = 0;
++
++ if(facepnts.Size() == 4)
++ {
++ tmppnts = facepnts.Elem(1);
++ facepnts.Elem(1) = facepnts.Elem(2);
++ facepnts.Elem(2) = tmppnts;
++
++ tmppnts = facepnts.Elem(3);
++ facepnts.Elem(3) = facepnts.Elem(4);
++ facepnts.Elem(4) = tmppnts;
++ }
++ else if(facepnts.Size() == 3)
++ {
++ tmppnts = facepnts.Elem(1);
++ facepnts.Elem(1) = facepnts.Elem(3);
++ facepnts.Elem(3) = tmppnts;
++ }
++ }
++
++ *outfile << facepnts.Size();
++ *outfile << "(";
++ for(int j = 1; j <= facepnts.Size(); j++)
++ {
++ *outfile << facepnts.Elem(j)-1;
++ if(j != facepnts.Size()) *outfile << " ";
++ }
++ *outfile << ")\n";
++ }
++
++ // Now append the faces of the surface elements (written in
++ // ascending order of boundary condition number) also into
++ // the faces file
++ for(int i = 1; i <= surfelem_lists.Size(); i++)
++ {
++ int face_w_orientation = surfelem_lists.Elem(i).I1();
++ int facenr = abs(face_w_orientation);
++
++ meshtopo.GetFaceVertices(facenr,facepnts);
++
++ // Get the orientation of the face, and invert it if required
++ if(face_w_orientation > 0)
++ {
++ int tmppnts = 0;
++
++ if(facepnts.Size() == 4)
++ {
++ tmppnts = facepnts.Elem(1);
++ facepnts.Elem(1) = facepnts.Elem(2);
++ facepnts.Elem(2) = tmppnts;
++
++ tmppnts = facepnts.Elem(3);
++ facepnts.Elem(3) = facepnts.Elem(4);
++ facepnts.Elem(4) = tmppnts;
++ }
++ else if(facepnts.Size() == 3)
++ {
++ tmppnts = facepnts.Elem(1);
++ facepnts.Elem(1) = facepnts.Elem(3);
++ facepnts.Elem(3) = tmppnts;
++ }
++ }
++
++ *outfile << facepnts.Size();
++ *outfile << "(";
++ for(int j = 1; j <= facepnts.Size(); j++)
++ {
++ *outfile << facepnts.Elem(j)-1;
++ if(j != facepnts.Size()) *outfile << " ";
++ }
++ *outfile << ")\n";
++ }
++
++ *outfile << ")\n\n";
++ WriteOpenFOAM15xDividerEnd(outfile);
++ }
++
++
++
++ static void WritePointsFile (ostream * outfile, const Mesh & mesh)
++ {
++ int np = mesh.GetNP();
++
++ // Write the OpenFOAM standard banner and dividers, etc...
++ WriteOpenFOAM15xBanner(outfile);
++ *outfile << "FoamFile \n"
++ << "{ \n"
++ << " version 2.0; \n"
++ << " format ascii; \n"
++ << " class vectorField; \n"
++ << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"
++ << " location \"constant\\polyMesh\"; \n"
++ << " object points; \n"
++ << "} \n";
++ WriteOpenFOAM15xDividerStart(outfile);
++
++ *outfile << "\n\n";
++
++ // Number of points in the following list
++ *outfile << np << "\n";
++
++ outfile->precision(6);
++ outfile->setf (ios::fixed, ios::floatfield);
++ outfile->setf (ios::showpoint);
++
++ // Coordinate list starts here
++ *outfile << "(\n";
++
++ for(int i = 1; i <= np; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++
++ // Write coordinates to file
++ *outfile << "(";
++ *outfile << p.X() << " ";
++ *outfile << p.Y() << " ";
++ *outfile << p.Z();
++ *outfile << ")\n";
++ }
++ *outfile << ")\n\n";
++ WriteOpenFOAM15xDividerEnd(outfile);
++ }
++
++
++
++ static void WriteBoundaryFile (ostream * outfile)
++ {
++ // Write the OpenFOAM standard banner and dividers, etc...
++ WriteOpenFOAM15xBanner(outfile);
++ *outfile << "FoamFile \n"
++ << "{ \n"
++ << " version 2.0; \n"
++ << " format ascii; \n"
++ << " class polyBoundaryMesh; \n"
++ << " note \"Mesh generated and converted using NETGEN-" << PACKAGE_VERSION << "\"; \n"
++ << " location \"constant\\polyMesh\"; \n"
++ << " object boundary; \n"
++ << "} \n";
++ WriteOpenFOAM15xDividerStart(outfile);
++
++ *outfile << "\n";
++
++
++ Array<INDEX_3> bcarray;
++ int ind = 1;
++
++ // Since the boundary conditions are already sorted in ascending
++ // order, the last element will give the maximum number of possible
++ // boundary condition entries
++ int bcmax = surfelem_bclist.Elem(surfelem_bclist.Size());
++
++ bcarray.SetSize(bcmax+1);
++
++ bcarray.Elem(ind) = INDEX_3(surfelem_bclist.Elem(1),1,0);
++
++ for(int i = 2; i <= surfelem_bclist.Size(); i++)
++ {
++ if(surfelem_bclist.Elem(i) == bcarray.Elem(ind).I1())
++ {
++ bcarray.Elem(ind).I2() = bcarray.Elem(ind).I2()+1;
++ }
++ else
++ {
++ ind++;
++ bcarray.Elem(ind) = INDEX_3(surfelem_bclist.Elem(i),1,i-1);
++ }
++ }
++
++ bcarray.SetSize(ind);
++
++ *outfile << bcarray.Size() << "\n";
++ *outfile << "(\n";
++
++ int startface = 0;
++
++ for(int i = 1; i <= bcarray.Size(); i++)
++ {
++ startface = owner_celllist.Size() + bcarray.Elem(i).I3();
++
++ *outfile << " patch" << bcarray.Elem(i).I1() << "\n"
++ << " {\n"
++ << " type patch;\n"
++ << " physicalType patch;\n"
++ << " nFaces " << bcarray.Elem(i).I2() << ";\n"
++ << " startFace " << startface << ";\n"
++ << " }\n";
++ }
++
++ *outfile << ")\n\n";
++ WriteOpenFOAM15xDividerEnd(outfile);
++ }
++
++
++
++ void WriteOpenFOAM15xFormat (const Mesh & mesh, const string & casename, const bool compressed)
++ {
++ bool error = false;
++ char casefiles[256];
++
++ // Make sure that the mesh data has been updated
++ const_cast<Mesh&> (mesh).Compress();
++ const_cast<Mesh&> (mesh).CalcSurfacesOfNode();
++ const_cast<Mesh&> (mesh).RebuildSurfaceElementLists();
++ const_cast<Mesh&> (mesh).BuildElementSearchTree();
++
++
++ int np = mesh.GetNP();
++ int nse = mesh.GetNSE();
++ int ne = mesh.GetNE();
++
++ cout << "Write OpenFOAM 1.5+ Mesh Files....\n";
++
++ // Abort if there are no points, surface elements or volume elements
++ if((np <= 0) || (ne <= 0) || (nse <= 0))
++ {
++ cout << "Export Error: Invalid mesh.... Aborting!\n";
++ return;
++ }
++
++ // OpenFOAM only supports linear meshes!
++ if(mparam.secondorder || mesh.GetCurvedElements().IsHighOrder())
++ {
++ cout << "Export Error: OpenFOAM 1.5+ does not support non-linear elements.... Aborting!\n";
++ return;
++ }
++
++ if(( (mesh.SurfaceElement(nse/2).GetType() != TRIG)
++ && (mesh.SurfaceElement(nse/2).GetType() != QUAD) )
++ || (mesh.VolumeElement(ne/2).GetType() == TET10)
++ || (mesh.VolumeElement(ne/2).GetType() == PRISM12))
++ {
++ cout << "Export Error: OpenFOAM 1.5+ does not support non-linear elements.... Aborting!\n";
++ return;
++ }
++
++
++ cout << "Writing OpenFOAM 1.5+ Mesh files to case: " << casename << "\n";
++
++ // Create the case directory if it does not already exist
++ // NOTE: This needs to be improved for the Linux variant....!!!
++ #ifdef WIN32
++ char casedir[256];
++ sprintf(casedir, "mkdir %s\\constant\\polyMesh", casename.c_str());
++ system(casedir);
++ #else
++ char casedir[256];
++ mkdir(casename.c_str(), S_IRWXU|S_IRWXG);
++ sprintf(casedir, "%s/constant", casename.c_str());
++ mkdir(casedir, S_IRWXU|S_IRWXG);
++ sprintf(casedir, "%s/constant/polyMesh", casename.c_str());
++ mkdir(casedir, S_IRWXU|S_IRWXG);
++ #endif
++
++ // Open handles to the five required mesh files
++ // points
++ // faces
++ // owner
++ // neighbour
++ // boundary
++ ostream *outfile_pnts;
++ ostream *outfile_faces;
++ ostream *outfile_own;
++ ostream *outfile_nei;
++ ostream *outfile_bnd;
++
++ if(compressed)
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/points.gz", casename.c_str());
++ outfile_pnts = new ogzstream(casefiles);
++ }
++ else
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/points", casename.c_str());
++ outfile_pnts = new ofstream(casefiles);
++ }
++
++ if(compressed)
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/faces.gz", casename.c_str());
++ outfile_faces = new ogzstream(casefiles);
++ }
++ else
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/faces", casename.c_str());
++ outfile_faces = new ofstream(casefiles);
++ }
++
++ if(compressed)
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/owner.gz", casename.c_str());
++ outfile_own = new ogzstream(casefiles);
++ }
++ else
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/owner", casename.c_str());
++ outfile_own = new ofstream(casefiles);
++ }
++
++ if(compressed)
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/neighbour.gz", casename.c_str());
++ outfile_nei = new ogzstream(casefiles);
++ }
++ else
++ {
++ sprintf(casefiles, "%s/constant/polyMesh/neighbour", casename.c_str());
++ outfile_nei = new ofstream(casefiles);
++ }
++
++ // Note... the boundary file is not compressed
++ sprintf(casefiles, "%s/constant/polyMesh/boundary", casename.c_str());
++ outfile_bnd = new ofstream(casefiles);
++
++ ResetTime();
++
++ // Build the owner, neighbour, faces and boundary lists
++ // from the Netgen mesh
++ cout << "\nBuilding Owner, Neighbour and Face Lists: ";
++
++ error = BuildOwnerNeighbourLists(mesh);
++
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++
++
++ // Write the "owner" file
++ if(outfile_own->good() && !error)
++ {
++ cout << "Writing the owner file: ";
++ WriteOwnerFile(outfile_own);
++ delete outfile_own;
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++ }
++ else
++ {
++ cout << "Export Error: Error creating file: owner.... Aborting\n";
++ error = true;
++ }
++
++
++ // Write the "neighbour" file
++ if(outfile_nei->good() && !error)
++ {
++ cout << "Writing the neighbour file: ";
++ WriteNeighbourFile(outfile_nei);
++ delete outfile_nei;
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++ }
++ else
++ {
++ cout << "Export Error: Error creating file: neighbour.... Aborting\n";
++ error = true;
++ }
++
++
++ // Write the "faces" file
++ if(outfile_faces->good() && !error)
++ {
++ cout << "Writing the faces file: ";
++ WriteFacesFile(outfile_faces, mesh);
++ delete outfile_faces;
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++ }
++ else
++ {
++ cout << "Export Error: Error creating file: faces.... Aborting\n";
++ error = true;
++ }
++
++
++ // Write the "points" file
++ if(outfile_pnts->good() && !error)
++ {
++ cout << "Writing the points file: ";
++ WritePointsFile(outfile_pnts,mesh);
++ delete outfile_pnts;
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++ }
++ else
++ {
++ cout << "Export Error: Error creating file: points.... Aborting\n";
++ error = true;
++ }
++
++
++ // Write the "boundary" file
++ if(outfile_bnd->good() && !error)
++ {
++ cout << "Writing the boundary file: ";
++ WriteBoundaryFile(outfile_bnd);
++ delete outfile_bnd;
++ cout << "Done! (Time Elapsed = " << GetTime() << " sec)\n";
++ }
++ else
++ {
++ cout << "Export Error: Error creating file: boundary.... Aborting\n";
++ error = true;
++ }
++
++ if(!error)
++ {
++ cout << "OpenFOAM 1.5+ Export successfully completed (Time elapsed = " << GetTime() << " sec) !\n";
++ }
++ else
++ {
++ cout << "Error in OpenFOAM 1.5+ Export.... Aborted!\n";
++ }
++ }
++}
++
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/interface/writeuser.cpp netgen-5.3.1_SRC_modif/libsrc/interface/writeuser.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/interface/writeuser.cpp 2014-08-29 13:54:02.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/interface/writeuser.cpp 2019-11-14 16:56:23.170430926 +0300
+@@ -1,1040 +1,1040 @@
+-//\r
+-// Write user dependent output file\r
+-//\r
+-\r
+-#include <mystdlib.h>\r
+-\r
+-#include <myadt.hpp>\r
+-#include <linalg.hpp>\r
+-#include <csg.hpp>\r
+-#include <geometry2d.hpp>\r
+-#include <meshing.hpp>\r
+-\r
+-namespace netgen\r
+-{\r
+-#include "writeuser.hpp"\r
+-\r
+-\r
+- void RegisterUserFormats (Array<const char*> & names,\r
+- Array<const char*> & extensions)\r
+- \r
+-{\r
+- const char *types[] =\r
+- {\r
+- "Neutral Format", ".mesh",\r
+- "Surface Mesh Format", ".mesh" ,\r
+- "DIFFPACK Format", ".mesh",\r
+- "TecPlot Format", ".mesh",\r
+- "Tochnog Format", ".mesh",\r
+- "Abaqus Format", ".mesh",\r
+- "Fluent Format", ".mesh",\r
+- "Permas Format", ".mesh",\r
+- "FEAP Format", ".mesh",\r
+- "Elmer Format", "*",\r
+- "STL Format", ".stl",\r
+- "STL Extended Format", ".stl",\r
+- "VRML Format", ".*",\r
+- "Gmsh Format", ".gmsh",\r
+- "Gmsh2 Format", ".gmsh2",\r
+- "OpenFOAM 1.5+ Format", "*",\r
+- "OpenFOAM 1.5+ Compressed", "*",\r
+- "JCMwave Format", ".jcm",\r
+- "TET Format", ".tet",\r
+- // { "Chemnitz Format" },\r
+- 0\r
+- };\r
+- \r
+- for (int i = 0; types[2*i]; i++)\r
+- {\r
+- names.Append (types[2*i]);\r
+- extensions.Append (types[2*i+1]);\r
+- }\r
+-}\r
+- \r
+-\r
+-\r
+-bool WriteUserFormat (const string & format,\r
+- const Mesh & mesh,\r
+- const NetgenGeometry & hgeom,\r
+- const string & filename)\r
+-{\r
+- const CSGeometry & geom = *dynamic_cast<const CSGeometry*> (&hgeom);\r
+-\r
+- PrintMessage (1, "Export mesh to file ", filename,\r
+- ", format is ", format);\r
+-\r
+- if (format == "Neutral Format")\r
+- WriteNeutralFormat (mesh, geom, filename);\r
+-\r
+- else if (format == "Surface Mesh Format")\r
+- WriteSurfaceFormat (mesh, filename);\r
+-\r
+- else if (format == "DIFFPACK Format")\r
+- WriteDiffPackFormat (mesh, geom, filename);\r
+-\r
+- else if (format == "Tochnog Format")\r
+- WriteTochnogFormat (mesh, filename);\r
+-\r
+- else if (format == "TecPlot Format")\r
+- cerr << "ERROR: TecPlot format currently out of order" << endl;\r
+- // WriteTecPlotFormat (mesh, geom, filename);\r
+-\r
+- else if (format == "Abaqus Format")\r
+- WriteAbaqusFormat (mesh, filename);\r
+-\r
+- else if (format == "Fluent Format")\r
+- WriteFluentFormat (mesh, filename);\r
+-\r
+- else if (format == "Permas Format")\r
+- WritePermasFormat (mesh, filename);\r
+-\r
+- else if (format == "FEAP Format")\r
+- WriteFEAPFormat (mesh, filename);\r
+-\r
+- else if (format == "Elmer Format")\r
+- WriteElmerFormat (mesh, filename);\r
+-\r
+- else if (format == "STL Format")\r
+- WriteSTLFormat (mesh, filename);\r
+-\r
+- // Philippose - 16 August 2010\r
+- // Added additional STL Export in which\r
+- // each face of the geometry is treated\r
+- // as a separate "solid" entity\r
+- else if (format == "STL Extended Format")\r
+- WriteSTLExtFormat (mesh, filename);\r
+-\r
+- else if (format == "VRML Format")\r
+- WriteVRMLFormat (mesh, 1, filename);\r
+-\r
+- else if (format == "Fepp Format")\r
+- WriteFEPPFormat (mesh, geom, filename);\r
+-\r
+- else if (format == "EdgeElement Format")\r
+- WriteEdgeElementFormat (mesh, geom, filename);\r
+-\r
+- else if (format == "Chemnitz Format")\r
+- WriteUserChemnitz (mesh, filename);\r
+-\r
+- else if (format == "Gmsh Format")\r
+- WriteGmshFormat (mesh, geom, filename);\r
+-\r
+- // Philippose - 29/01/2009\r
+- // Added Gmsh v2.xx Mesh export capability\r
+- else if (format == "Gmsh2 Format")\r
+- WriteGmsh2Format (mesh, geom, filename);\r
+-\r
+- // Philippose - 25/10/2009\r
+- // Added OpenFOAM 1.5+ Mesh export capability\r
+- else if (format == "OpenFOAM 1.5+ Format")\r
+- WriteOpenFOAM15xFormat (mesh, filename, false);\r
+-\r
+- else if (format == "OpenFOAM 1.5+ Compressed")\r
+- WriteOpenFOAM15xFormat (mesh, filename, true);\r
+-\r
+- else if (format == "JCMwave Format")\r
+- WriteJCMFormat (mesh, geom, filename);\r
+-\r
+-#ifdef OLIVER\r
+- else if (format == "TET Format")\r
+- WriteTETFormat( mesh, filename);//, "High Frequency" );\r
+-#endif\r
+-\r
+- else\r
+- {\r
+- return 1;\r
+- }\r
+-\r
+- return 0;\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- * Neutral mesh format\r
+- * points, elements, surface elements\r
+- */\r
+-\r
+-void WriteNeutralFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename)\r
+-{\r
+- cout << "write neutral, new" << endl;\r
+- int np = mesh.GetNP();\r
+- int ne = mesh.GetNE();\r
+- int nse = mesh.GetNSE();\r
+- int nseg = mesh.GetNSeg();\r
+- int i, j;\r
+-\r
+- int inverttets = mparam.inverttets;\r
+- int invertsurf = mparam.inverttrigs;\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- outfile.precision(6);\r
+- outfile.setf (ios::fixed, ios::floatfield);\r
+- outfile.setf (ios::showpoint);\r
+-\r
+- outfile << np << "\n";\r
+-\r
+- for (i = 1; i <= np; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+-\r
+- outfile.width(10);\r
+- outfile << p.X() << " ";\r
+- outfile.width(9);\r
+- outfile << p.Y() << " ";\r
+- if (mesh.GetDimension() == 3)\r
+- {\r
+- outfile.width(9);\r
+- outfile << p.Z();\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+- if (mesh.GetDimension() == 3)\r
+- {\r
+- outfile << ne << "\n";\r
+- for (i = 1; i <= ne; i++)\r
+- {\r
+- Element el = mesh.VolumeElement(i);\r
+- if (inverttets)\r
+- el.Invert();\r
+- outfile.width(4);\r
+- outfile << el.GetIndex() << " ";\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+- outfile << "\n";\r
+- }\r
+- }\r
+-\r
+- outfile << nse << "\n";\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- Element2d el = mesh.SurfaceElement(i);\r
+- if (invertsurf)\r
+- el.Invert();\r
+- outfile.width(4);\r
+- outfile << mesh.GetFaceDescriptor (el.GetIndex()).BCProperty() << " ";\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+-\r
+- if (mesh.GetDimension() == 2)\r
+- {\r
+- outfile << nseg << "\n";\r
+- for (i = 1; i <= nseg; i++)\r
+- {\r
+- const Segment & seg = mesh.LineSegment(i);\r
+- outfile.width(4);\r
+- outfile << seg.si << " ";\r
+-\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << seg[0];\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << seg[1];\r
+-\r
+- outfile << "\n";\r
+- }\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-void WriteSurfaceFormat (const Mesh & mesh,\r
+- const string & filename)\r
+-{\r
+- // surface mesh\r
+- int i, j;\r
+-\r
+- cout << "Write Surface Mesh" << endl;\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- outfile << "surfacemesh" << endl;\r
+-\r
+- outfile << mesh.GetNP() << endl;\r
+- for (i = 1; i <= mesh.GetNP(); i++)\r
+- {\r
+- for (j = 0; j < 3; j++)\r
+- {\r
+- outfile.width(10);\r
+- outfile << mesh.Point(i)(j) << " ";\r
+- }\r
+- outfile << endl;\r
+- }\r
+- outfile << mesh.GetNSE() << endl;\r
+- for (i = 1; i <= mesh.GetNSE(); i++)\r
+- {\r
+- for (j = 1; j <= 3; j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << mesh.SurfaceElement(i).PNum(j);\r
+- }\r
+- outfile << endl;\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- * save surface mesh as STL file\r
+- */\r
+-\r
+-void WriteSTLFormat (const Mesh & mesh,\r
+- const string & filename)\r
+-{\r
+- cout << "\nWrite STL Surface Mesh" << endl;\r
+-\r
+- ostream *outfile;\r
+-\r
+- if(filename.substr(filename.length()-3,3) == ".gz")\r
+- outfile = new ogzstream(filename.c_str());\r
+- else\r
+- outfile = new ofstream(filename.c_str());\r
+-\r
+- int i;\r
+-\r
+- outfile->precision(10);\r
+-\r
+- *outfile << "solid" << endl;\r
+-\r
+- for (i = 1; i <= mesh.GetNSE(); i++)\r
+- {\r
+- *outfile << "facet normal ";\r
+- const Point3d& p1 = mesh.Point(mesh.SurfaceElement(i).PNum(1));\r
+- const Point3d& p2 = mesh.Point(mesh.SurfaceElement(i).PNum(2));\r
+- const Point3d& p3 = mesh.Point(mesh.SurfaceElement(i).PNum(3));\r
+-\r
+- Vec3d normal = Cross(p2-p1,p3-p1);\r
+- if (normal.Length() != 0)\r
+- {\r
+- normal /= (normal.Length());\r
+- }\r
+-\r
+- *outfile << normal.X() << " " << normal.Y() << " " << normal.Z() << "\n";\r
+- *outfile << "outer loop\n";\r
+-\r
+- *outfile << "vertex " << p1.X() << " " << p1.Y() << " " << p1.Z() << "\n";\r
+- *outfile << "vertex " << p2.X() << " " << p2.Y() << " " << p2.Z() << "\n";\r
+- *outfile << "vertex " << p3.X() << " " << p3.Y() << " " << p3.Z() << "\n";\r
+-\r
+- *outfile << "endloop\n";\r
+- *outfile << "endfacet\n";\r
+- }\r
+- *outfile << "endsolid" << endl;\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- * Philippose - 16 August 2010\r
+- * Save surface mesh as STL file\r
+- * with a separate solid definition\r
+- * for each face\r
+- * - This helps in splitting up the\r
+- * STL into named boundary faces\r
+- * when using a third-party mesher\r
+- */\r
+-void WriteSTLExtFormat (const Mesh & mesh,\r
+- const string & filename)\r
+-{\r
+- cout << "\nWrite STL Surface Mesh (with separated boundary faces)" << endl;\r
+-\r
+- ostream *outfile;\r
+-\r
+- if(filename.substr(filename.length()-3,3) == ".gz")\r
+- outfile = new ogzstream(filename.c_str());\r
+- else\r
+- outfile = new ofstream(filename.c_str());\r
+-\r
+- outfile->precision(10);\r
+-\r
+- int numBCs = 0;\r
+-\r
+- Array<int> faceBCs;\r
+- TABLE<int> faceBCMapping;\r
+-\r
+- faceBCs.SetSize(mesh.GetNFD());\r
+- faceBCMapping.SetSize(mesh.GetNFD());\r
+-\r
+- faceBCs = -1;\r
+-\r
+- // Collect the BC numbers used in the mesh\r
+- for(int faceNr = 1; faceNr <= mesh.GetNFD(); faceNr++)\r
+- {\r
+- int bcNum = mesh.GetFaceDescriptor(faceNr).BCProperty();\r
+-\r
+- if(faceBCs.Pos(bcNum) < 0)\r
+- {\r
+- numBCs++;\r
+- faceBCs.Set(numBCs,bcNum);\r
+- faceBCMapping.Add1(numBCs,faceNr); \r
+- }\r
+- else\r
+- {\r
+- faceBCMapping.Add1(faceBCs.Pos(bcNum)+1,faceNr);\r
+- }\r
+- }\r
+-\r
+- faceBCs.SetSize(numBCs);\r
+- faceBCMapping.ChangeSize(numBCs);\r
+-\r
+- // Now actually write the data to file\r
+- for(int bcInd = 1; bcInd <= faceBCs.Size(); bcInd++)\r
+- {\r
+- *outfile << "solid Boundary_" << faceBCs.Elem(bcInd) << "\n";\r
+-\r
+- for(int faceNr = 1;faceNr <= faceBCMapping.EntrySize(bcInd); faceNr++)\r
+- {\r
+- Array<SurfaceElementIndex> faceSei;\r
+- mesh.GetSurfaceElementsOfFace(faceBCMapping.Get(bcInd,faceNr),faceSei);\r
+-\r
+- for (int i = 0; i < faceSei.Size(); i++)\r
+- {\r
+- *outfile << "facet normal ";\r
+- const Point3d& p1 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(1));\r
+- const Point3d& p2 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(2));\r
+- const Point3d& p3 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(3));\r
+-\r
+- Vec3d normal = Cross(p2-p1,p3-p1);\r
+- if (normal.Length() != 0)\r
+- {\r
+- normal /= (normal.Length());\r
+- }\r
+-\r
+- *outfile << normal.X() << " " << normal.Y() << " " << normal.Z() << "\n";\r
+- *outfile << "outer loop\n";\r
+-\r
+- *outfile << "vertex " << p1.X() << " " << p1.Y() << " " << p1.Z() << "\n";\r
+- *outfile << "vertex " << p2.X() << " " << p2.Y() << " " << p2.Z() << "\n";\r
+- *outfile << "vertex " << p3.X() << " " << p3.Y() << " " << p3.Z() << "\n";\r
+-\r
+- *outfile << "endloop\n";\r
+- *outfile << "endfacet\n";\r
+- }\r
+- }\r
+- *outfile << "endsolid Boundary_" << faceBCs.Elem(bcInd) << "\n";\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- *\r
+- * write surface mesh as VRML file\r
+- *\r
+- */\r
+-\r
+-void WriteVRMLFormat (const Mesh & mesh,\r
+- bool faces,\r
+- const string & filename)\r
+-{\r
+-\r
+- if (faces)\r
+-\r
+- {\r
+- // Output in VRML, IndexedFaceSet is used\r
+- // Bartosz Sawicki <sawickib@ee.pw.edu.pl>\r
+-\r
+- int np = mesh.GetNP();\r
+- int nse = mesh.GetNSE();\r
+- int i, j;\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- outfile.precision(6);\r
+- outfile.setf (ios::fixed, ios::floatfield);\r
+- outfile.setf (ios::showpoint);\r
+-\r
+- outfile << "#VRML V2.0 utf8 \n"\r
+- "Background {\n"\r
+- " skyColor [1 1 1]\n"\r
+- " groundColor [1 1 1]\n"\r
+- "}\n"\r
+- "Group{ children [\n"\r
+- "Shape{ \n"\r
+- "appearance Appearance { material Material { }} \n"\r
+- "geometry IndexedFaceSet { \n"\r
+- "coord Coordinate { point [ \n";\r
+-\r
+-\r
+- for (i = 1; i <= np; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+- outfile.width(10);\r
+- outfile << p.X() << " ";\r
+- outfile << p.Y() << " ";\r
+- outfile << p.Z() << " \n";\r
+- }\r
+-\r
+- outfile << " ] } \n"\r
+- "coordIndex [ \n";\r
+-\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- const Element2d & el = mesh.SurfaceElement(i);\r
+-\r
+- for (j = 1; j <= 3; j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << el.PNum(j)-1;\r
+- }\r
+- outfile << " -1 \n";\r
+- }\r
+-\r
+- outfile << " ] \n";\r
+-\r
+- //define number and RGB definitions of colors\r
+- outfile << "color Color { color [1 0 0, 0 1 0, 0 0 1, 1 1 0]} \n"\r
+- "colorIndex [\n";\r
+-\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- outfile << mesh.GetFaceDescriptor(mesh.SurfaceElement(i).GetIndex ()).BCProperty();\r
+- outfile << endl;\r
+- }\r
+-\r
+- outfile << " ] \n"\r
+- "colorPerVertex FALSE \n"\r
+- "creaseAngle 0 \n"\r
+- "solid FALSE \n"\r
+- "ccw FALSE \n"\r
+- "convex TRUE \n"\r
+- "} } # end of Shape\n"\r
+- "] }\n";\r
+-\r
+- } /* end of VRMLFACES */\r
+-\r
+-\r
+- else\r
+-\r
+- {\r
+- // Output in VRML, IndexedLineSet is used\r
+- // Bartosz Sawicki <sawickib@ee.pw.edu.pl>\r
+-\r
+- int np = mesh.GetNP();\r
+- int nse = mesh.GetNSE();\r
+- int i, j;\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- outfile.precision(6);\r
+- outfile.setf (ios::fixed, ios::floatfield);\r
+- outfile.setf (ios::showpoint);\r
+-\r
+- outfile << "#VRML V2.0 utf8 \n"\r
+- "Background {\n"\r
+- " skyColor [1 1 1]\n"\r
+- " groundColor [1 1 1]\n"\r
+- "}\n"\r
+- "Group{ children [\n"\r
+- "Shape{ \n"\r
+- "appearance Appearance { material Material { }} \n"\r
+- "geometry IndexedLineSet { \n"\r
+- "coord Coordinate { point [ \n";\r
+-\r
+-\r
+- for (i = 1; i <= np; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+- outfile.width(10);\r
+- outfile << p.X() << " ";\r
+- outfile << p.Y() << " ";\r
+- outfile << p.Z() << " \n";\r
+- }\r
+-\r
+- outfile << " ] } \n"\r
+- "coordIndex [ \n";\r
+-\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- const Element2d & el = mesh.SurfaceElement(i);\r
+-\r
+- for (j = 1; j <= 3; j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << el.PNum(j)-1;\r
+- }\r
+- outfile.width(8);\r
+- outfile << el.PNum(1)-1;\r
+- outfile << " -1 \n";\r
+- }\r
+-\r
+- outfile << " ] \n";\r
+-\r
+-/* Uncomment if you want color mesh\r
+- outfile << "color Color { color [1 1 1, 0 1 0, 0 0 1, 1 1 0]} \n"\r
+- "colorIndex [\n";\r
+-\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- outfile << mesh.GetFaceDescriptor(mesh.SurfaceElement(i).GetIndex ()).BCProperty();\r
+- outfile << endl;\r
+- }\r
+-\r
+- outfile << " ] \n"\r
+-*/\r
+- outfile << "colorPerVertex FALSE \n"\r
+- "} } #end of Shape\n"\r
+- "] } \n";\r
+-\r
+- }\r
+-\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- * FEPP .. a finite element package developed at University Linz, Austria\r
+- */\r
+-void WriteFEPPFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename)\r
+-{\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- if (mesh.GetDimension() == 3)\r
+-\r
+- {\r
+-\r
+- // output for FEPP\r
+-\r
+- int np = mesh.GetNP();\r
+- int ne = mesh.GetNE();\r
+- int nse = mesh.GetNSE();\r
+- int ns = mesh.GetNFD();\r
+- int i, j;\r
+-\r
+- outfile.precision(5);\r
+- outfile.setf (ios::fixed, ios::floatfield);\r
+- outfile.setf (ios::showpoint);\r
+-\r
+- outfile << "volumemesh4" << endl;\r
+- outfile << nse << endl;\r
+- for (i = 1; i <= nse; i++)\r
+- {\r
+- const Element2d & el = mesh.SurfaceElement(i);\r
+-\r
+- // int facenr = mesh.facedecoding.Get(el.GetIndex()).surfnr;\r
+- outfile.width(4);\r
+- outfile << el.GetIndex() << " ";\r
+- outfile.width(4);\r
+- // outfile << mesh.GetFaceDescriptor(el.GetIndex()).BCProperty() << " ";\r
+- outfile << mesh.GetFaceDescriptor(el.GetIndex()).BCProperty() << " ";\r
+- outfile.width(4);\r
+- outfile << el.GetNP() << " ";\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+-\r
+- outfile << ne << "\n";\r
+- for (i = 1; i <= ne; i++)\r
+- {\r
+- const Element & el = mesh.VolumeElement(i);\r
+- outfile.width(4);\r
+- outfile << el.GetIndex() << " ";\r
+- outfile.width(4);\r
+- outfile << el.GetNP() << " ";\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+- outfile << np << "\n";\r
+- for (i = 1; i <= np; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+-\r
+- outfile.width(10);\r
+- outfile << p.X() << " ";\r
+- outfile.width(9);\r
+- outfile << p.Y() << " ";\r
+- outfile.width(9);\r
+- outfile << p.Z() << "\n";\r
+- }\r
+-\r
+- /*\r
+- if (typ == WRITE_FEPPML)\r
+- {\r
+- int nbn = mesh.mlbetweennodes.Size();\r
+- outfile << nbn << "\n";\r
+- for (i = 1; i <= nbn; i++)\r
+- outfile << mesh.mlbetweennodes.Get(i).I1() << " "\r
+- << mesh.mlbetweennodes.Get(i).I2() << "\n";\r
+-\r
+-\r
+- // int ncon = mesh.connectedtonode.Size();\r
+- // outfile << ncon << "\n";\r
+- // for (i = 1; i <= ncon; i++)\r
+- // outfile << i << " " << mesh.connectedtonode.Get(i) << endl;\r
+- }\r
+- */\r
+-\r
+-\r
+- // write CSG surfaces\r
+- if (&geom && geom.GetNSurf() >= ns)\r
+- {\r
+- outfile << ns << endl;\r
+- for (i = 1; i <= ns; i++)\r
+- geom.GetSurface(mesh.GetFaceDescriptor(i).SurfNr())->Print(outfile);\r
+- }\r
+- else\r
+- outfile << "0" << endl;\r
+- }\r
+-\r
+-\r
+- else\r
+-\r
+- { // 2D fepp format\r
+-\r
+- ;\r
+- /*\r
+- extern SplineGeometry2d * geometry2d;\r
+- if (geometry2d)\r
+- Save2DMesh (mesh, &geometry2d->GetSplines(), outfile);\r
+- else\r
+- Save2DMesh (mesh, 0, outfile);\r
+- */\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-/*\r
+- * Edge element mesh format\r
+- * points, elements, edges\r
+- */\r
+-\r
+-void WriteEdgeElementFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename)\r
+-{\r
+- cout << "write edge element format" << endl;\r
+-\r
+- const MeshTopology * top = &mesh.GetTopology();\r
+- int npoints = mesh.GetNP();\r
+- int nelements = mesh.GetNE();\r
+- int nsurfelem = mesh.GetNSE();\r
+- int nedges = top->GetNEdges();\r
+- int i, j;\r
+-\r
+- int inverttets = mparam.inverttets;\r
+- int invertsurf = mparam.inverttrigs;\r
+- Array<int> edges;\r
+-\r
+- ofstream outfile (filename.c_str());\r
+-\r
+- outfile.precision(6);\r
+- outfile.setf (ios::fixed, ios::floatfield);\r
+- outfile.setf (ios::showpoint);\r
+-\r
+-\r
+- // vertices with coordinates\r
+- outfile << npoints << "\n";\r
+- for (i = 1; i <= npoints; i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+-\r
+- outfile.width(10);\r
+- outfile << p.X() << " ";\r
+- outfile.width(9);\r
+- outfile << p.Y() << " ";\r
+- outfile.width(9);\r
+- outfile << p.Z() << "\n";\r
+- }\r
+-\r
+- // element - edge - list\r
+- outfile << nelements << " " << nedges << "\n";\r
+- for (i = 1; i <= nelements; i++)\r
+- {\r
+- Element el = mesh.VolumeElement(i);\r
+- if (inverttets)\r
+- el.Invert();\r
+- outfile.width(4);\r
+- outfile << el.GetIndex() << " ";\r
+- outfile.width(8);\r
+- outfile << el.GetNP();\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+-\r
+- top->GetElementEdges(i,edges);\r
+- outfile << endl << " ";\r
+- outfile.width(8);\r
+- outfile << edges.Size();\r
+- for (j=1; j <= edges.Size(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << edges[j-1];\r
+- }\r
+- outfile << "\n";\r
+-\r
+- // orientation:\r
+- top->GetElementEdgeOrientations(i,edges);\r
+- outfile << " ";\r
+- for (j=1; j <= edges.Size(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << edges[j-1];\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+- // surface element - edge - list (with boundary conditions)\r
+- outfile << nsurfelem << "\n";\r
+- for (i = 1; i <= nsurfelem; i++)\r
+- {\r
+- Element2d el = mesh.SurfaceElement(i);\r
+- if (invertsurf)\r
+- el.Invert();\r
+- outfile.width(4);\r
+- outfile << mesh.GetFaceDescriptor (el.GetIndex()).BCProperty() << " ";\r
+- outfile.width(8);\r
+- outfile << el.GetNP();\r
+- for (j = 1; j <= el.GetNP(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+-\r
+- top->GetSurfaceElementEdges(i,edges);\r
+- outfile << endl << " ";\r
+- outfile.width(8);\r
+- outfile << edges.Size();\r
+- for (j=1; j <= edges.Size(); j++)\r
+- {\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << edges[j-1];\r
+- }\r
+- outfile << "\n";\r
+- }\r
+-\r
+-\r
+- int v1, v2;\r
+- // edge - vertex - list\r
+- outfile << nedges << "\n";\r
+- for (i=1; i <= nedges; i++)\r
+- {\r
+- top->GetEdgeVertices(i,v1,v2);\r
+- outfile.width(4);\r
+- outfile << v1;\r
+- outfile << " ";\r
+- outfile.width(8);\r
+- outfile << v2 << endl;\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-#ifdef OLDSTYLE_WRITE\r
+-\r
+-\r
+-void WriteFile (int typ,\r
+- const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const char * filename,\r
+- const char * geomfile,\r
+- double h)\r
+-{\r
+-\r
+-\r
+- int inverttets = mparam.inverttets;\r
+- int invertsurf = mparam.inverttrigs;\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+- if (typ == WRITE_EDGEELEMENT)\r
+- {\r
+- // write edge element file\r
+- // Peter Harscher, ETHZ\r
+-\r
+- cout << "Write Edge-Element Format" << endl;\r
+-\r
+- ofstream outfile (filename);\r
+-\r
+- int i, j;\r
+- int ned;\r
+-\r
+- // hash table representing edges;\r
+- INDEX_2_HASHTABLE<int> edgeht(mesh.GetNP());\r
+-\r
+- // list of edges\r
+- Array<INDEX_2> edgelist;\r
+-\r
+- // edge (point) on boundary ?\r
+- BitArray bedge, bpoint(mesh.GetNP());\r
+-\r
+- static int eledges[6][2] = { { 1, 2 } , { 1, 3 } , { 1, 4 },\r
+- { 2, 3 } , { 2, 4 } , { 3, 4 } };\r
+-\r
+- // fill hashtable (point1, point2) ----> edgenr\r
+- for (i = 1; i <= mesh.GetNE(); i++)\r
+- {\r
+- const Element & el = mesh.VolumeElement (i);\r
+- INDEX_2 edge;\r
+- for (j = 1; j <= 6; j++)\r
+- {\r
+- edge.I1() = el.PNum (eledges[j-1][0]);\r
+- edge.I2() = el.PNum (eledges[j-1][1]);\r
+- edge.Sort();\r
+-\r
+- if (!edgeht.Used (edge))\r
+- {\r
+- edgelist.Append (edge);\r
+- edgeht.Set (edge, edgelist.Size());\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- // set bedges, bpoints\r
+- bedge.SetSize (edgelist.Size());\r
+- bedge.Clear();\r
+- bpoint.Clear();\r
+-\r
+- for (i = 1; i <= mesh.GetNSE(); i++)\r
+- {\r
+- const Element2d & sel = mesh.SurfaceElement(i);\r
+- for (j = 1; j <= 3; j++)\r
+- {\r
+- bpoint.Set (sel.PNum(j));\r
+-\r
+- INDEX_2 edge;\r
+- edge.I1() = sel.PNum(j);\r
+- edge.I2() = sel.PNum(j%3+1);\r
+- edge.Sort();\r
+-\r
+- bedge.Set (edgeht.Get (edge));\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- outfile << mesh.GetNE() << endl;\r
+- // write element ---> point\r
+- for (i = 1; i <= mesh.GetNE(); i++)\r
+- {\r
+- const Element & el = mesh.VolumeElement(i);\r
+-\r
+- outfile.width(8);\r
+- outfile << i;\r
+- for (j = 1; j <= 4; j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << el.PNum(j);\r
+- }\r
+- outfile << endl;\r
+- }\r
+-\r
+- // write element ---> edge\r
+- for (i = 1; i <= mesh.GetNE(); i++)\r
+- {\r
+- const Element & el = mesh.VolumeElement (i);\r
+- INDEX_2 edge;\r
+- for (j = 1; j <= 6; j++)\r
+- {\r
+- edge.I1() = el.PNum (eledges[j-1][0]);\r
+- edge.I2() = el.PNum (eledges[j-1][1]);\r
+- edge.Sort();\r
+-\r
+- outfile.width(8);\r
+- outfile << edgeht.Get (edge);\r
+- }\r
+- outfile << endl;\r
+- }\r
+-\r
+- // write points\r
+- outfile << mesh.GetNP() << endl;\r
+- outfile.precision (6);\r
+- for (i = 1; i <= mesh.GetNP(); i++)\r
+- {\r
+- const Point3d & p = mesh.Point(i);\r
+-\r
+- for (j = 1; j <= 3; j++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << p.X(j);\r
+- }\r
+- outfile << " "\r
+- << (bpoint.Test(i) ? "1" : 0) << endl;\r
+- }\r
+-\r
+- // write edges\r
+- outfile << edgelist.Size() << endl;\r
+- for (i = 1; i <= edgelist.Size(); i++)\r
+- {\r
+- outfile.width(8);\r
+- outfile << edgelist.Get(i).I1();\r
+- outfile.width(8);\r
+- outfile << edgelist.Get(i).I2();\r
+- outfile << " "\r
+- << (bedge.Test(i) ? "1" : "0") << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-}\r
+-#endif\r
+-}\r
+-\r
++//
++// Write user dependent output file
++//
++
++#include <mystdlib.h>
++
++#include <myadt.hpp>
++#include <linalg.hpp>
++#include <csg.hpp>
++#include <geometry2d.hpp>
++#include <meshing.hpp>
++
++namespace netgen
++{
++#include "writeuser.hpp"
++
++
++ void RegisterUserFormats (Array<const char*> & names,
++ Array<const char*> & extensions)
++
++{
++ const char *types[] =
++ {
++ "Neutral Format", ".mesh",
++ "Surface Mesh Format", ".mesh" ,
++ "DIFFPACK Format", ".mesh",
++ "TecPlot Format", ".mesh",
++ "Tochnog Format", ".mesh",
++ "Abaqus Format", ".mesh",
++ "Fluent Format", ".mesh",
++ "Permas Format", ".mesh",
++ "FEAP Format", ".mesh",
++ "Elmer Format", "*",
++ "STL Format", ".stl",
++ "STL Extended Format", ".stl",
++ "VRML Format", ".*",
++ "Gmsh Format", ".gmsh",
++ "Gmsh2 Format", ".gmsh2",
++ "OpenFOAM 1.5+ Format", "*",
++ "OpenFOAM 1.5+ Compressed", "*",
++ "JCMwave Format", ".jcm",
++ "TET Format", ".tet",
++ // { "Chemnitz Format" },
++ 0
++ };
++
++ for (int i = 0; types[2*i]; i++)
++ {
++ names.Append (types[2*i]);
++ extensions.Append (types[2*i+1]);
++ }
++}
++
++
++
++bool WriteUserFormat (const string & format,
++ const Mesh & mesh,
++ const NetgenGeometry & hgeom,
++ const string & filename)
++{
++ const CSGeometry & geom = *dynamic_cast<const CSGeometry*> (&hgeom);
++
++ PrintMessage (1, "Export mesh to file ", filename,
++ ", format is ", format);
++
++ if (format == "Neutral Format")
++ WriteNeutralFormat (mesh, geom, filename);
++
++ else if (format == "Surface Mesh Format")
++ WriteSurfaceFormat (mesh, filename);
++
++ else if (format == "DIFFPACK Format")
++ WriteDiffPackFormat (mesh, geom, filename);
++
++ else if (format == "Tochnog Format")
++ WriteTochnogFormat (mesh, filename);
++
++ else if (format == "TecPlot Format")
++ cerr << "ERROR: TecPlot format currently out of order" << endl;
++ // WriteTecPlotFormat (mesh, geom, filename);
++
++ else if (format == "Abaqus Format")
++ WriteAbaqusFormat (mesh, filename);
++
++ else if (format == "Fluent Format")
++ WriteFluentFormat (mesh, filename);
++
++ else if (format == "Permas Format")
++ WritePermasFormat (mesh, filename);
++
++ else if (format == "FEAP Format")
++ WriteFEAPFormat (mesh, filename);
++
++ else if (format == "Elmer Format")
++ WriteElmerFormat (mesh, filename);
++
++ else if (format == "STL Format")
++ WriteSTLFormat (mesh, filename);
++
++ // Philippose - 16 August 2010
++ // Added additional STL Export in which
++ // each face of the geometry is treated
++ // as a separate "solid" entity
++ else if (format == "STL Extended Format")
++ WriteSTLExtFormat (mesh, filename);
++
++ else if (format == "VRML Format")
++ WriteVRMLFormat (mesh, 1, filename);
++
++ else if (format == "Fepp Format")
++ WriteFEPPFormat (mesh, geom, filename);
++
++ else if (format == "EdgeElement Format")
++ WriteEdgeElementFormat (mesh, geom, filename);
++
++ else if (format == "Chemnitz Format")
++ WriteUserChemnitz (mesh, filename);
++
++ else if (format == "Gmsh Format")
++ WriteGmshFormat (mesh, geom, filename);
++
++ // Philippose - 29/01/2009
++ // Added Gmsh v2.xx Mesh export capability
++ else if (format == "Gmsh2 Format")
++ WriteGmsh2Format (mesh, geom, filename);
++
++ // Philippose - 25/10/2009
++ // Added OpenFOAM 1.5+ Mesh export capability
++ else if (format == "OpenFOAM 1.5+ Format")
++ WriteOpenFOAM15xFormat (mesh, filename, false);
++
++ else if (format == "OpenFOAM 1.5+ Compressed")
++ WriteOpenFOAM15xFormat (mesh, filename, true);
++
++ else if (format == "JCMwave Format")
++ WriteJCMFormat (mesh, geom, filename);
++
++#ifdef OLIVER
++ else if (format == "TET Format")
++ WriteTETFormat( mesh, filename);//, "High Frequency" );
++#endif
++
++ else
++ {
++ return 1;
++ }
++
++ return 0;
++}
++
++
++
++
++/*
++ * Neutral mesh format
++ * points, elements, surface elements
++ */
++
++void WriteNeutralFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename)
++{
++ cout << "write neutral, new" << endl;
++ int np = mesh.GetNP();
++ int ne = mesh.GetNE();
++ int nse = mesh.GetNSE();
++ int nseg = mesh.GetNSeg();
++ int i, j;
++
++ int inverttets = mparam.inverttets;
++ int invertsurf = mparam.inverttrigs;
++
++ ofstream outfile (filename.c_str());
++
++ outfile.precision(6);
++ outfile.setf (ios::fixed, ios::floatfield);
++ outfile.setf (ios::showpoint);
++
++ outfile << np << "\n";
++
++ for (i = 1; i <= np; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++
++ outfile.width(10);
++ outfile << p.X() << " ";
++ outfile.width(9);
++ outfile << p.Y() << " ";
++ if (mesh.GetDimension() == 3)
++ {
++ outfile.width(9);
++ outfile << p.Z();
++ }
++ outfile << "\n";
++ }
++
++ if (mesh.GetDimension() == 3)
++ {
++ outfile << ne << "\n";
++ for (i = 1; i <= ne; i++)
++ {
++ Element el = mesh.VolumeElement(i);
++ if (inverttets)
++ el.Invert();
++ outfile.width(4);
++ outfile << el.GetIndex() << " ";
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++ outfile << "\n";
++ }
++ }
++
++ outfile << nse << "\n";
++ for (i = 1; i <= nse; i++)
++ {
++ Element2d el = mesh.SurfaceElement(i);
++ if (invertsurf)
++ el.Invert();
++ outfile.width(4);
++ outfile << mesh.GetFaceDescriptor (el.GetIndex()).BCProperty() << " ";
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++ outfile << "\n";
++ }
++
++
++ if (mesh.GetDimension() == 2)
++ {
++ outfile << nseg << "\n";
++ for (i = 1; i <= nseg; i++)
++ {
++ const Segment & seg = mesh.LineSegment(i);
++ outfile.width(4);
++ outfile << seg.si << " ";
++
++ outfile << " ";
++ outfile.width(8);
++ outfile << seg[0];
++ outfile << " ";
++ outfile.width(8);
++ outfile << seg[1];
++
++ outfile << "\n";
++ }
++ }
++}
++
++
++
++
++
++
++
++
++
++void WriteSurfaceFormat (const Mesh & mesh,
++ const string & filename)
++{
++ // surface mesh
++ int i, j;
++
++ cout << "Write Surface Mesh" << endl;
++
++ ofstream outfile (filename.c_str());
++
++ outfile << "surfacemesh" << endl;
++
++ outfile << mesh.GetNP() << endl;
++ for (i = 1; i <= mesh.GetNP(); i++)
++ {
++ for (j = 0; j < 3; j++)
++ {
++ outfile.width(10);
++ outfile << mesh.Point(i)(j) << " ";
++ }
++ outfile << endl;
++ }
++ outfile << mesh.GetNSE() << endl;
++ for (i = 1; i <= mesh.GetNSE(); i++)
++ {
++ for (j = 1; j <= 3; j++)
++ {
++ outfile.width(8);
++ outfile << mesh.SurfaceElement(i).PNum(j);
++ }
++ outfile << endl;
++ }
++}
++
++
++
++
++
++/*
++ * save surface mesh as STL file
++ */
++
++void WriteSTLFormat (const Mesh & mesh,
++ const string & filename)
++{
++ cout << "\nWrite STL Surface Mesh" << endl;
++
++ ostream *outfile;
++
++ if(filename.substr(filename.length()-3,3) == ".gz")
++ outfile = new ogzstream(filename.c_str());
++ else
++ outfile = new ofstream(filename.c_str());
++
++ int i;
++
++ outfile->precision(10);
++
++ *outfile << "solid" << endl;
++
++ for (i = 1; i <= mesh.GetNSE(); i++)
++ {
++ *outfile << "facet normal ";
++ const Point3d& p1 = mesh.Point(mesh.SurfaceElement(i).PNum(1));
++ const Point3d& p2 = mesh.Point(mesh.SurfaceElement(i).PNum(2));
++ const Point3d& p3 = mesh.Point(mesh.SurfaceElement(i).PNum(3));
++
++ Vec3d normal = Cross(p2-p1,p3-p1);
++ if (normal.Length() != 0)
++ {
++ normal /= (normal.Length());
++ }
++
++ *outfile << normal.X() << " " << normal.Y() << " " << normal.Z() << "\n";
++ *outfile << "outer loop\n";
++
++ *outfile << "vertex " << p1.X() << " " << p1.Y() << " " << p1.Z() << "\n";
++ *outfile << "vertex " << p2.X() << " " << p2.Y() << " " << p2.Z() << "\n";
++ *outfile << "vertex " << p3.X() << " " << p3.Y() << " " << p3.Z() << "\n";
++
++ *outfile << "endloop\n";
++ *outfile << "endfacet\n";
++ }
++ *outfile << "endsolid" << endl;
++}
++
++
++
++
++
++/*
++ * Philippose - 16 August 2010
++ * Save surface mesh as STL file
++ * with a separate solid definition
++ * for each face
++ * - This helps in splitting up the
++ * STL into named boundary faces
++ * when using a third-party mesher
++ */
++void WriteSTLExtFormat (const Mesh & mesh,
++ const string & filename)
++{
++ cout << "\nWrite STL Surface Mesh (with separated boundary faces)" << endl;
++
++ ostream *outfile;
++
++ if(filename.substr(filename.length()-3,3) == ".gz")
++ outfile = new ogzstream(filename.c_str());
++ else
++ outfile = new ofstream(filename.c_str());
++
++ outfile->precision(10);
++
++ int numBCs = 0;
++
++ Array<int> faceBCs;
++ TABLE<int> faceBCMapping;
++
++ faceBCs.SetSize(mesh.GetNFD());
++ faceBCMapping.SetSize(mesh.GetNFD());
++
++ faceBCs = -1;
++
++ // Collect the BC numbers used in the mesh
++ for(int faceNr = 1; faceNr <= mesh.GetNFD(); faceNr++)
++ {
++ int bcNum = mesh.GetFaceDescriptor(faceNr).BCProperty();
++
++ if(faceBCs.Pos(bcNum) < 0)
++ {
++ numBCs++;
++ faceBCs.Set(numBCs,bcNum);
++ faceBCMapping.Add1(numBCs,faceNr);
++ }
++ else
++ {
++ faceBCMapping.Add1(faceBCs.Pos(bcNum)+1,faceNr);
++ }
++ }
++
++ faceBCs.SetSize(numBCs);
++ faceBCMapping.ChangeSize(numBCs);
++
++ // Now actually write the data to file
++ for(int bcInd = 1; bcInd <= faceBCs.Size(); bcInd++)
++ {
++ *outfile << "solid Boundary_" << faceBCs.Elem(bcInd) << "\n";
++
++ for(int faceNr = 1;faceNr <= faceBCMapping.EntrySize(bcInd); faceNr++)
++ {
++ Array<SurfaceElementIndex> faceSei;
++ mesh.GetSurfaceElementsOfFace(faceBCMapping.Get(bcInd,faceNr),faceSei);
++
++ for (int i = 0; i < faceSei.Size(); i++)
++ {
++ *outfile << "facet normal ";
++ const Point3d& p1 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(1));
++ const Point3d& p2 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(2));
++ const Point3d& p3 = mesh.Point(mesh.SurfaceElement(faceSei[i]).PNum(3));
++
++ Vec3d normal = Cross(p2-p1,p3-p1);
++ if (normal.Length() != 0)
++ {
++ normal /= (normal.Length());
++ }
++
++ *outfile << normal.X() << " " << normal.Y() << " " << normal.Z() << "\n";
++ *outfile << "outer loop\n";
++
++ *outfile << "vertex " << p1.X() << " " << p1.Y() << " " << p1.Z() << "\n";
++ *outfile << "vertex " << p2.X() << " " << p2.Y() << " " << p2.Z() << "\n";
++ *outfile << "vertex " << p3.X() << " " << p3.Y() << " " << p3.Z() << "\n";
++
++ *outfile << "endloop\n";
++ *outfile << "endfacet\n";
++ }
++ }
++ *outfile << "endsolid Boundary_" << faceBCs.Elem(bcInd) << "\n";
++ }
++}
++
++
++
++
++/*
++ *
++ * write surface mesh as VRML file
++ *
++ */
++
++void WriteVRMLFormat (const Mesh & mesh,
++ bool faces,
++ const string & filename)
++{
++
++ if (faces)
++
++ {
++ // Output in VRML, IndexedFaceSet is used
++ // Bartosz Sawicki <sawickib@ee.pw.edu.pl>
++
++ int np = mesh.GetNP();
++ int nse = mesh.GetNSE();
++ int i, j;
++
++ ofstream outfile (filename.c_str());
++
++ outfile.precision(6);
++ outfile.setf (ios::fixed, ios::floatfield);
++ outfile.setf (ios::showpoint);
++
++ outfile << "#VRML V2.0 utf8 \n"
++ "Background {\n"
++ " skyColor [1 1 1]\n"
++ " groundColor [1 1 1]\n"
++ "}\n"
++ "Group{ children [\n"
++ "Shape{ \n"
++ "appearance Appearance { material Material { }} \n"
++ "geometry IndexedFaceSet { \n"
++ "coord Coordinate { point [ \n";
++
++
++ for (i = 1; i <= np; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++ outfile.width(10);
++ outfile << p.X() << " ";
++ outfile << p.Y() << " ";
++ outfile << p.Z() << " \n";
++ }
++
++ outfile << " ] } \n"
++ "coordIndex [ \n";
++
++ for (i = 1; i <= nse; i++)
++ {
++ const Element2d & el = mesh.SurfaceElement(i);
++
++ for (j = 1; j <= 3; j++)
++ {
++ outfile.width(8);
++ outfile << el.PNum(j)-1;
++ }
++ outfile << " -1 \n";
++ }
++
++ outfile << " ] \n";
++
++ //define number and RGB definitions of colors
++ outfile << "color Color { color [1 0 0, 0 1 0, 0 0 1, 1 1 0]} \n"
++ "colorIndex [\n";
++
++ for (i = 1; i <= nse; i++)
++ {
++ outfile << mesh.GetFaceDescriptor(mesh.SurfaceElement(i).GetIndex ()).BCProperty();
++ outfile << endl;
++ }
++
++ outfile << " ] \n"
++ "colorPerVertex FALSE \n"
++ "creaseAngle 0 \n"
++ "solid FALSE \n"
++ "ccw FALSE \n"
++ "convex TRUE \n"
++ "} } # end of Shape\n"
++ "] }\n";
++
++ } /* end of VRMLFACES */
++
++
++ else
++
++ {
++ // Output in VRML, IndexedLineSet is used
++ // Bartosz Sawicki <sawickib@ee.pw.edu.pl>
++
++ int np = mesh.GetNP();
++ int nse = mesh.GetNSE();
++ int i, j;
++
++ ofstream outfile (filename.c_str());
++
++ outfile.precision(6);
++ outfile.setf (ios::fixed, ios::floatfield);
++ outfile.setf (ios::showpoint);
++
++ outfile << "#VRML V2.0 utf8 \n"
++ "Background {\n"
++ " skyColor [1 1 1]\n"
++ " groundColor [1 1 1]\n"
++ "}\n"
++ "Group{ children [\n"
++ "Shape{ \n"
++ "appearance Appearance { material Material { }} \n"
++ "geometry IndexedLineSet { \n"
++ "coord Coordinate { point [ \n";
++
++
++ for (i = 1; i <= np; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++ outfile.width(10);
++ outfile << p.X() << " ";
++ outfile << p.Y() << " ";
++ outfile << p.Z() << " \n";
++ }
++
++ outfile << " ] } \n"
++ "coordIndex [ \n";
++
++ for (i = 1; i <= nse; i++)
++ {
++ const Element2d & el = mesh.SurfaceElement(i);
++
++ for (j = 1; j <= 3; j++)
++ {
++ outfile.width(8);
++ outfile << el.PNum(j)-1;
++ }
++ outfile.width(8);
++ outfile << el.PNum(1)-1;
++ outfile << " -1 \n";
++ }
++
++ outfile << " ] \n";
++
++/* Uncomment if you want color mesh
++ outfile << "color Color { color [1 1 1, 0 1 0, 0 0 1, 1 1 0]} \n"
++ "colorIndex [\n";
++
++ for (i = 1; i <= nse; i++)
++ {
++ outfile << mesh.GetFaceDescriptor(mesh.SurfaceElement(i).GetIndex ()).BCProperty();
++ outfile << endl;
++ }
++
++ outfile << " ] \n"
++*/
++ outfile << "colorPerVertex FALSE \n"
++ "} } #end of Shape\n"
++ "] } \n";
++
++ }
++
++}
++
++
++
++
++
++
++/*
++ * FEPP .. a finite element package developed at University Linz, Austria
++ */
++void WriteFEPPFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename)
++{
++
++ ofstream outfile (filename.c_str());
++
++ if (mesh.GetDimension() == 3)
++
++ {
++
++ // output for FEPP
++
++ int np = mesh.GetNP();
++ int ne = mesh.GetNE();
++ int nse = mesh.GetNSE();
++ int ns = mesh.GetNFD();
++ int i, j;
++
++ outfile.precision(5);
++ outfile.setf (ios::fixed, ios::floatfield);
++ outfile.setf (ios::showpoint);
++
++ outfile << "volumemesh4" << endl;
++ outfile << nse << endl;
++ for (i = 1; i <= nse; i++)
++ {
++ const Element2d & el = mesh.SurfaceElement(i);
++
++ // int facenr = mesh.facedecoding.Get(el.GetIndex()).surfnr;
++ outfile.width(4);
++ outfile << el.GetIndex() << " ";
++ outfile.width(4);
++ // outfile << mesh.GetFaceDescriptor(el.GetIndex()).BCProperty() << " ";
++ outfile << mesh.GetFaceDescriptor(el.GetIndex()).BCProperty() << " ";
++ outfile.width(4);
++ outfile << el.GetNP() << " ";
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++ outfile << "\n";
++ }
++
++
++ outfile << ne << "\n";
++ for (i = 1; i <= ne; i++)
++ {
++ const Element & el = mesh.VolumeElement(i);
++ outfile.width(4);
++ outfile << el.GetIndex() << " ";
++ outfile.width(4);
++ outfile << el.GetNP() << " ";
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++ outfile << "\n";
++ }
++
++ outfile << np << "\n";
++ for (i = 1; i <= np; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++
++ outfile.width(10);
++ outfile << p.X() << " ";
++ outfile.width(9);
++ outfile << p.Y() << " ";
++ outfile.width(9);
++ outfile << p.Z() << "\n";
++ }
++
++ /*
++ if (typ == WRITE_FEPPML)
++ {
++ int nbn = mesh.mlbetweennodes.Size();
++ outfile << nbn << "\n";
++ for (i = 1; i <= nbn; i++)
++ outfile << mesh.mlbetweennodes.Get(i).I1() << " "
++ << mesh.mlbetweennodes.Get(i).I2() << "\n";
++
++
++ // int ncon = mesh.connectedtonode.Size();
++ // outfile << ncon << "\n";
++ // for (i = 1; i <= ncon; i++)
++ // outfile << i << " " << mesh.connectedtonode.Get(i) << endl;
++ }
++ */
++
++
++ // write CSG surfaces
++ if (&geom && geom.GetNSurf() >= ns)
++ {
++ outfile << ns << endl;
++ for (i = 1; i <= ns; i++)
++ geom.GetSurface(mesh.GetFaceDescriptor(i).SurfNr())->Print(outfile);
++ }
++ else
++ outfile << "0" << endl;
++ }
++
++
++ else
++
++ { // 2D fepp format
++
++ ;
++ /*
++ extern SplineGeometry2d * geometry2d;
++ if (geometry2d)
++ Save2DMesh (mesh, &geometry2d->GetSplines(), outfile);
++ else
++ Save2DMesh (mesh, 0, outfile);
++ */
++ }
++}
++
++
++
++
++
++
++/*
++ * Edge element mesh format
++ * points, elements, edges
++ */
++
++void WriteEdgeElementFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename)
++{
++ cout << "write edge element format" << endl;
++
++ const MeshTopology * top = &mesh.GetTopology();
++ int npoints = mesh.GetNP();
++ int nelements = mesh.GetNE();
++ int nsurfelem = mesh.GetNSE();
++ int nedges = top->GetNEdges();
++ int i, j;
++
++ int inverttets = mparam.inverttets;
++ int invertsurf = mparam.inverttrigs;
++ Array<int> edges;
++
++ ofstream outfile (filename.c_str());
++
++ outfile.precision(6);
++ outfile.setf (ios::fixed, ios::floatfield);
++ outfile.setf (ios::showpoint);
++
++
++ // vertices with coordinates
++ outfile << npoints << "\n";
++ for (i = 1; i <= npoints; i++)
++ {
++ const Point3d & p = mesh.Point(i);
++
++ outfile.width(10);
++ outfile << p.X() << " ";
++ outfile.width(9);
++ outfile << p.Y() << " ";
++ outfile.width(9);
++ outfile << p.Z() << "\n";
++ }
++
++ // element - edge - list
++ outfile << nelements << " " << nedges << "\n";
++ for (i = 1; i <= nelements; i++)
++ {
++ Element el = mesh.VolumeElement(i);
++ if (inverttets)
++ el.Invert();
++ outfile.width(4);
++ outfile << el.GetIndex() << " ";
++ outfile.width(8);
++ outfile << el.GetNP();
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++
++ top->GetElementEdges(i,edges);
++ outfile << endl << " ";
++ outfile.width(8);
++ outfile << edges.Size();
++ for (j=1; j <= edges.Size(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << edges[j-1];
++ }
++ outfile << "\n";
++
++ // orientation:
++ top->GetElementEdgeOrientations(i,edges);
++ outfile << " ";
++ for (j=1; j <= edges.Size(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << edges[j-1];
++ }
++ outfile << "\n";
++ }
++
++ // surface element - edge - list (with boundary conditions)
++ outfile << nsurfelem << "\n";
++ for (i = 1; i <= nsurfelem; i++)
++ {
++ Element2d el = mesh.SurfaceElement(i);
++ if (invertsurf)
++ el.Invert();
++ outfile.width(4);
++ outfile << mesh.GetFaceDescriptor (el.GetIndex()).BCProperty() << " ";
++ outfile.width(8);
++ outfile << el.GetNP();
++ for (j = 1; j <= el.GetNP(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++
++ top->GetSurfaceElementEdges(i,edges);
++ outfile << endl << " ";
++ outfile.width(8);
++ outfile << edges.Size();
++ for (j=1; j <= edges.Size(); j++)
++ {
++ outfile << " ";
++ outfile.width(8);
++ outfile << edges[j-1];
++ }
++ outfile << "\n";
++ }
++
++
++ int v1, v2;
++ // edge - vertex - list
++ outfile << nedges << "\n";
++ for (i=1; i <= nedges; i++)
++ {
++ top->GetEdgeVertices(i,v1,v2);
++ outfile.width(4);
++ outfile << v1;
++ outfile << " ";
++ outfile.width(8);
++ outfile << v2 << endl;
++ }
++}
++
++
++
++
++
++
++
++
++
++#ifdef OLDSTYLE_WRITE
++
++
++void WriteFile (int typ,
++ const Mesh & mesh,
++ const CSGeometry & geom,
++ const char * filename,
++ const char * geomfile,
++ double h)
++{
++
++
++ int inverttets = mparam.inverttets;
++ int invertsurf = mparam.inverttrigs;
++
++
++
++
++
++
++
++
++ if (typ == WRITE_EDGEELEMENT)
++ {
++ // write edge element file
++ // Peter Harscher, ETHZ
++
++ cout << "Write Edge-Element Format" << endl;
++
++ ofstream outfile (filename);
++
++ int i, j;
++ int ned;
++
++ // hash table representing edges;
++ INDEX_2_HASHTABLE<int> edgeht(mesh.GetNP());
++
++ // list of edges
++ Array<INDEX_2> edgelist;
++
++ // edge (point) on boundary ?
++ BitArray bedge, bpoint(mesh.GetNP());
++
++ static int eledges[6][2] = { { 1, 2 } , { 1, 3 } , { 1, 4 },
++ { 2, 3 } , { 2, 4 } , { 3, 4 } };
++
++ // fill hashtable (point1, point2) ----> edgenr
++ for (i = 1; i <= mesh.GetNE(); i++)
++ {
++ const Element & el = mesh.VolumeElement (i);
++ INDEX_2 edge;
++ for (j = 1; j <= 6; j++)
++ {
++ edge.I1() = el.PNum (eledges[j-1][0]);
++ edge.I2() = el.PNum (eledges[j-1][1]);
++ edge.Sort();
++
++ if (!edgeht.Used (edge))
++ {
++ edgelist.Append (edge);
++ edgeht.Set (edge, edgelist.Size());
++ }
++ }
++ }
++
++
++ // set bedges, bpoints
++ bedge.SetSize (edgelist.Size());
++ bedge.Clear();
++ bpoint.Clear();
++
++ for (i = 1; i <= mesh.GetNSE(); i++)
++ {
++ const Element2d & sel = mesh.SurfaceElement(i);
++ for (j = 1; j <= 3; j++)
++ {
++ bpoint.Set (sel.PNum(j));
++
++ INDEX_2 edge;
++ edge.I1() = sel.PNum(j);
++ edge.I2() = sel.PNum(j%3+1);
++ edge.Sort();
++
++ bedge.Set (edgeht.Get (edge));
++ }
++ }
++
++
++
++ outfile << mesh.GetNE() << endl;
++ // write element ---> point
++ for (i = 1; i <= mesh.GetNE(); i++)
++ {
++ const Element & el = mesh.VolumeElement(i);
++
++ outfile.width(8);
++ outfile << i;
++ for (j = 1; j <= 4; j++)
++ {
++ outfile.width(8);
++ outfile << el.PNum(j);
++ }
++ outfile << endl;
++ }
++
++ // write element ---> edge
++ for (i = 1; i <= mesh.GetNE(); i++)
++ {
++ const Element & el = mesh.VolumeElement (i);
++ INDEX_2 edge;
++ for (j = 1; j <= 6; j++)
++ {
++ edge.I1() = el.PNum (eledges[j-1][0]);
++ edge.I2() = el.PNum (eledges[j-1][1]);
++ edge.Sort();
++
++ outfile.width(8);
++ outfile << edgeht.Get (edge);
++ }
++ outfile << endl;
++ }
++
++ // write points
++ outfile << mesh.GetNP() << endl;
++ outfile.precision (6);
++ for (i = 1; i <= mesh.GetNP(); i++)
++ {
++ const Point3d & p = mesh.Point(i);
++
++ for (j = 1; j <= 3; j++)
++ {
++ outfile.width(8);
++ outfile << p.X(j);
++ }
++ outfile << " "
++ << (bpoint.Test(i) ? "1" : 0) << endl;
++ }
++
++ // write edges
++ outfile << edgelist.Size() << endl;
++ for (i = 1; i <= edgelist.Size(); i++)
++ {
++ outfile.width(8);
++ outfile << edgelist.Get(i).I1();
++ outfile.width(8);
++ outfile << edgelist.Get(i).I2();
++ outfile << " "
++ << (bedge.Test(i) ? "1" : "0") << endl;
++ }
++ }
++
++
++
++
++}
++#endif
++}
++
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/interface/writeuser.hpp netgen-5.3.1_SRC_modif/libsrc/interface/writeuser.hpp
+--- netgen-5.3.1_SRC_orig/libsrc/interface/writeuser.hpp 2014-08-29 13:54:02.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/interface/writeuser.hpp 2019-11-14 16:56:23.222429470 +0300
+@@ -1,166 +1,166 @@
+-#ifndef WRITEUSER\r
+-#define WRITEUSER\r
+-\r
+-/**************************************************************************/\r
+-/* File: writeuser.hh */\r
+-/* Authors: many */\r
+-/* Date: 10. Dec. 97 */\r
+-/**************************************************************************/\r
+-\r
+-\r
+-extern\r
+-void WriteFile (int typ,\r
+- const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const char * filename,\r
+- const char * geomfile = NULL,\r
+- double h = 0);\r
+-\r
+-\r
+-\r
+-extern\r
+-void ReadFile (Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-extern\r
+-void WriteNeutralFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteSurfaceFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteSTLFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-// Philippose - 16 August 2010\r
+-// Added the STL Extended format in which\r
+-// each face of the geometry is treated as\r
+-// a separate "solid" entity in the STL file\r
+-extern\r
+-void WriteSTLExtFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-extern\r
+-void WriteVRMLFormat (const Mesh & mesh,\r
+- bool faces,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteFEPPFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteGmshFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-\r
+-// Philippose - 29/01/2009\r
+-// Added GMSH v2.xx Mesh Export support\r
+-void WriteGmsh2Format (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-\r
+-// Philippose - 25/10/2009\r
+-// Added OpenFOAM 1.5+ Mesh Export support\r
+-extern \r
+-void WriteOpenFOAM15xFormat (const Mesh & mesh, \r
+- const string & casename,\r
+- const bool compressed);\r
+-\r
+-\r
+-extern\r
+-void WriteUserChemnitz (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteJCMFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-\r
+-extern\r
+-void WriteDiffPackFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteTochnogFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteTecPlotFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteAbaqusFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteFluentFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WritePermasFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteFEAPFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-extern\r
+-void WriteElmerFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-extern\r
+-void WriteEdgeElementFormat (const Mesh & mesh,\r
+- const CSGeometry & geom,\r
+- const string & filename);\r
+-\r
+-\r
+-\r
+-#ifdef OLIVER\r
+-extern\r
+-void WriteTETFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-#endif\r
+-\r
+-extern void ReadTETFormat (Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-extern void ReadFNFFormat (Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-\r
+-void WriteDolfinFormat (const Mesh & mesh,\r
+- const string & filename);\r
+-\r
+-\r
+-extern void RegisterUserFormats (Array<const char*> & names,\r
+- Array<const char*> & extensions);\r
+-\r
+-\r
+-extern bool WriteUserFormat (const string & format,\r
+- const Mesh & mesh,\r
+- const NetgenGeometry & geom,\r
+- const string & filename);\r
+-\r
+-#endif\r
+-\r
++#ifndef WRITEUSER
++#define WRITEUSER
++
++/**************************************************************************/
++/* File: writeuser.hh */
++/* Authors: many */
++/* Date: 10. Dec. 97 */
++/**************************************************************************/
++
++
++extern
++void WriteFile (int typ,
++ const Mesh & mesh,
++ const CSGeometry & geom,
++ const char * filename,
++ const char * geomfile = NULL,
++ double h = 0);
++
++
++
++extern
++void ReadFile (Mesh & mesh,
++ const string & filename);
++
++
++
++
++
++
++extern
++void WriteNeutralFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++extern
++void WriteSurfaceFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteSTLFormat (const Mesh & mesh,
++ const string & filename);
++
++
++// Philippose - 16 August 2010
++// Added the STL Extended format in which
++// each face of the geometry is treated as
++// a separate "solid" entity in the STL file
++extern
++void WriteSTLExtFormat (const Mesh & mesh,
++ const string & filename);
++
++
++extern
++void WriteVRMLFormat (const Mesh & mesh,
++ bool faces,
++ const string & filename);
++
++extern
++void WriteFEPPFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++extern
++void WriteGmshFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++
++// Philippose - 29/01/2009
++// Added GMSH v2.xx Mesh Export support
++void WriteGmsh2Format (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++
++// Philippose - 25/10/2009
++// Added OpenFOAM 1.5+ Mesh Export support
++extern
++void WriteOpenFOAM15xFormat (const Mesh & mesh,
++ const string & casename,
++ const bool compressed);
++
++
++extern
++void WriteUserChemnitz (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteJCMFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++
++extern
++void WriteDiffPackFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++extern
++void WriteTochnogFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteTecPlotFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++extern
++void WriteAbaqusFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteFluentFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WritePermasFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteFEAPFormat (const Mesh & mesh,
++ const string & filename);
++
++extern
++void WriteElmerFormat (const Mesh & mesh,
++ const string & filename);
++
++
++extern
++void WriteEdgeElementFormat (const Mesh & mesh,
++ const CSGeometry & geom,
++ const string & filename);
++
++
++
++#ifdef OLIVER
++extern
++void WriteTETFormat (const Mesh & mesh,
++ const string & filename);
++
++#endif
++
++extern void ReadTETFormat (Mesh & mesh,
++ const string & filename);
++
++
++extern void ReadFNFFormat (Mesh & mesh,
++ const string & filename);
++
++
++
++void WriteDolfinFormat (const Mesh & mesh,
++ const string & filename);
++
++
++extern void RegisterUserFormats (Array<const char*> & names,
++ Array<const char*> & extensions);
++
++
++extern bool WriteUserFormat (const string & format,
++ const Mesh & mesh,
++ const NetgenGeometry & geom,
++ const string & filename);
++
++#endif
++
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/meshing/Makefile.am netgen-5.3.1_SRC_modif/libsrc/meshing/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/meshing/Makefile.am 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/meshing/Makefile.am 2019-11-14 16:56:25.162375168 +0300
+@@ -15,7 +15,7 @@
+
+ METASOURCES = AUTO
+
+-lib_LTLIBRARIES = libmesh.la
++noinst_LTLIBRARIES = libmesh.la
+
+ libmesh_la_SOURCES = adfront2.cpp adfront3.cpp bisect.cpp boundarylayer.cpp \
+ clusters.cpp curvedelems.cpp delaunay.cpp delaunay2d.cpp \
+@@ -30,8 +30,5 @@
+ topology.cpp triarls.cpp validate.cpp zrefine.cpp bcfunctions.cpp \
+ parallelmesh.cpp paralleltop.cpp paralleltop.hpp basegeom.cpp
+
+-libmesh_la_LIBADD = $(top_builddir)/libsrc/linalg/libla.la \
+- $(top_builddir)/libsrc/gprim/libgprim.la \
+- $(top_builddir)/libsrc/general/libgen.la \
+- -lz
++libmesh_la_LIBADD = -lz
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/meshing/findip.hpp netgen-5.3.1_SRC_modif/libsrc/meshing/findip.hpp
+--- netgen-5.3.1_SRC_orig/libsrc/meshing/findip.hpp 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/meshing/findip.hpp 2019-11-14 16:56:24.618390395 +0300
+@@ -75,6 +75,9 @@
+ static int timer = NgProfiler::CreateTimer ("FindInnerPoint");
+ NgProfiler::RegionTimer reg (timer);
+
++ if ( points.Size() < 3 )
++ return 0;
++
+ Array<Vec3d> a;
+ Array<double> c;
+ Mat<3> m, inv;
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/meshing/improve3.cpp netgen-5.3.1_SRC_modif/libsrc/meshing/improve3.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/meshing/improve3.cpp 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/meshing/improve3.cpp 2019-11-14 16:56:24.510393419 +0300
+@@ -1219,6 +1219,7 @@
+
+ tetused = 0;
+ tetused[0] = 1;
++ int nbtetused = 0;
+
+ for (int l = 2; l < nsuround; l++)
+ {
+@@ -1239,10 +1240,12 @@
+
+ tetused[k] = 1;
+ suroundpts[l] = newpi;
++ ++nbtetused;
+ }
+ }
+ }
+-
++ if ( nbtetused < nsuround )
++ continue;
+
+ bad1 = 0;
+ for (int k = 0; k < nsuround; k++)
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/meshing/meshtype.cpp netgen-5.3.1_SRC_modif/libsrc/meshing/meshtype.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/meshing/meshtype.cpp 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/meshing/meshtype.cpp 2019-11-14 16:56:24.906382333 +0300
+@@ -1,4 +1,5 @@
+ #include <mystdlib.h>
++#include <float.h> // to get DBL_MIN defined
+
+ #include "meshing.hpp"
+
+@@ -666,7 +667,8 @@
+
+ double det = trans.Det();
+
+- if (det <= 0)
++ // if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ err += 1e12;
+ else
+ err += frob * frob / det;
+@@ -722,7 +724,8 @@
+
+ double det = trans(0,0)*trans(1,1)-trans(1,0)*trans(0,1);
+
+- if (det <= 0)
++ // if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ {
+ dd = 0;
+ return 1e12;
+@@ -806,7 +809,8 @@
+ = dtrans(0,0) * trans(1,1) - trans(0,1) * dtrans(1,0)
+ + trans(0,0) * dtrans(1,1) - dtrans(0,1) * trans(1,0);
+
+- if (det <= 0)
++ // if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ err += 1e12;
+ else
+ {
+@@ -856,7 +860,8 @@
+ frob /= 2;
+
+ double det = trans.Det();
+- if (det <= 0)
++ //if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ err += 1e12;
+ else
+ err += frob * frob / det;
+@@ -1864,7 +1869,8 @@
+ case PYRAMID:
+ {
+ double noz = 1-p(2);
+- if (noz == 0.0) noz = 1e-10;
++ //if (noz == 0.0) noz = 1e-10;
++ if (noz <= DBL_MIN) noz = 1e-10; // avoid FPE
+
+ double xi = p(0) / noz;
+ double eta = p(1) / noz;
+@@ -2030,7 +2036,8 @@
+
+ double det = -trans.Det();
+
+- if (det <= 0)
++ //if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ err += 1e12;
+ else
+ err += frob * frob * frob / det;
+@@ -2102,7 +2109,8 @@
+ ddet *= -1;
+
+
+- if (det <= 0)
++ //if (det <= 0)
++ if (det <= DBL_MIN) // avoid FPE
+ err += 1e12;
+ else
+ {
+@@ -2184,7 +2192,7 @@
+
+ det *= -1;
+
+- if (det <= 0)
++ if (det <= DBL_MIN)
+ err += 1e12;
+ else
+ {
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/meshing/meshtype.hpp netgen-5.3.1_SRC_modif/libsrc/meshing/meshtype.hpp
+--- netgen-5.3.1_SRC_orig/libsrc/meshing/meshtype.hpp 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/meshing/meshtype.hpp 2019-11-14 16:56:24.310399017 +0300
+@@ -15,6 +15,7 @@
+ Classes for NETGEN
+ */
+
++class Mesh; // added due to compilation errors on some platforms
+
+
+ enum ELEMENT_TYPE {
+@@ -360,7 +361,7 @@
+ {
+ #ifdef DEBUG
+ if (typ != QUAD && typ != QUAD6 && typ != QUAD8)
+- PrintSysError ("element2d::GetNV not implemented for typ", typ)
++ PrintSysError ("element2d::GetNV not implemented for typ", typ);
+ #endif
+ return 4;
+ }
+@@ -618,7 +619,7 @@
+ return 8;
+ default:
+ #ifdef DEBUG
+- PrintSysError ("Element3d::GetNV not implemented for typ ", typ)
++ PrintSysError ("Element3d::GetNV not implemented for typ ", typ);
+ #endif
+ ;
+ }
+@@ -682,7 +683,7 @@
+ case PRISM12: return 5;
+ default:
+ #ifdef DEBUG
+- PrintSysError ("element3d::GetNFaces not implemented for typ", typ)
++ PrintSysError ("element3d::GetNFaces not implemented for typ", typ);
+ #endif
+ ;
+ }
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Makefile.am netgen-5.3.1_SRC_modif/libsrc/occ/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Makefile.am 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Makefile.am 2019-11-14 16:56:24.298399352 +0300
+@@ -14,10 +14,10 @@
+
+ METASOURCES = AUTO
+
+-lib_LTLIBRARIES = libocc.la
++noinst_LTLIBRARIES = libocc.la
+
+ if NGGUI
+-lib_LTLIBRARIES += liboccvis.la
++lib_LTLIBRARIES = liboccvis.la
+ endif
+
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter2d.cxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter2d.cxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter2d.cxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter2d.cxx 2019-11-14 16:56:23.574419617 +0300
+@@ -47,9 +47,7 @@
+ #include <TopOpeBRep_EdgesIntersector.hxx>
+ #include <TopOpeBRep_Point2d.hxx>
+ #include <TopTools_ListIteratorOfListOfShape.hxx>
+-#include <TopTools_ListOfShape.hxx>
+ #include <TopTools_MapIteratorOfMapOfShape.hxx>
+-#include <TopTools_MapOfShape.hxx>
+ #include <TopoDS.hxx>
+ #include <TopoDS_Edge.hxx>
+ #include <TopoDS_Vertex.hxx>
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter2d.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter2d.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter2d.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter2d.hxx 2019-11-14 16:56:24.278399912 +0300
+@@ -27,7 +27,9 @@
+ #ifndef _Partition_Inter2d_HeaderFile
+ #define _Partition_Inter2d_HeaderFile
+
+-#ifndef _Handle_BRepAlgo_AsDes_HeaderFile
++#include <Standard_Version.hxx>
++
++#if OCC_VERSION_MAJOR < 7
+ #include <Handle_BRepAlgo_AsDes.hxx>
+ #endif
+ #ifndef _Standard_Real_HeaderFile
+@@ -36,11 +38,13 @@
+ #ifndef _Standard_Boolean_HeaderFile
+ #include <Standard_Boolean.hxx>
+ #endif
++
++#include <TopTools_MapOfShape.hxx>
++#include <TopTools_ListOfShape.hxx>
++
+ class BRepAlgo_AsDes;
+ class TopoDS_Face;
+-class TopTools_MapOfShape;
+ class TopoDS_Vertex;
+-class TopTools_ListOfShape;
+ class TopoDS_Edge;
+
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter3d.cxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter3d.cxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter3d.cxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter3d.cxx 2019-11-14 16:56:23.426423760 +0300
+@@ -48,7 +48,6 @@
+ #include <TopOpeBRepTool_BoxSort.hxx>
+ #include <TopTools_DataMapIteratorOfDataMapOfShapeListOfShape.hxx>
+ #include <TopTools_ListIteratorOfListOfShape.hxx>
+-#include <TopTools_ListOfShape.hxx>
+ #include <TopoDS.hxx>
+ #include <TopoDS_Compound.hxx>
+ #include <TopoDS_Edge.hxx>
+@@ -206,7 +205,7 @@
+ Handle (Geom_Surface) S = BRep_Tool::Surface(F,L);
+
+ if (S->IsKind(STANDARD_TYPE(Geom_RectangularTrimmedSurface))) {
+- S = (*(Handle_Geom_RectangularTrimmedSurface*)&S)->BasisSurface();
++ S = Handle(Geom_RectangularTrimmedSurface)::DownCast (S)->BasisSurface();
+ }
+ if (!S->IsUPeriodic() && !S->IsVPeriodic())
+ return;
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter3d.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter3d.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Inter3d.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Inter3d.hxx 2019-11-14 16:56:23.542420513 +0300
+@@ -27,7 +27,9 @@
+ #ifndef _Partition_Inter3d_HeaderFile
+ #define _Partition_Inter3d_HeaderFile
+
+-#ifndef _Handle_BRepAlgo_AsDes_HeaderFile
++#include <Standard_Version.hxx>
++
++#if OCC_VERSION_MAJOR < 7
+ #include <Handle_BRepAlgo_AsDes.hxx>
+ #endif
+ #ifndef _TopTools_DataMapOfShapeListOfShape_HeaderFile
+@@ -36,6 +38,9 @@
+ #ifndef _TopTools_MapOfShape_HeaderFile
+ #include <TopTools_MapOfShape.hxx>
+ #endif
++#ifndef _TopTools_ListOfShape_HeaderFile
++#include <TopTools_ListOfShape.hxx>
++#endif
+ #ifndef _TopTools_DataMapOfShapeShape_HeaderFile
+ #include <TopTools_DataMapOfShapeShape.hxx>
+ #endif
+@@ -43,10 +48,7 @@
+ #include <Standard_Boolean.hxx>
+ #endif
+ class BRepAlgo_AsDes;
+-class TopTools_ListOfShape;
+-class TopTools_DataMapOfShapeShape;
+ class TopoDS_Face;
+-class TopTools_MapOfShape;
+ class TopoDS_Shape;
+ class TopoDS_Vertex;
+ class TopoDS_Edge;
+@@ -83,13 +85,13 @@
+ void FacesPartition(const TopoDS_Face& F1,const TopoDS_Face& F2) ;
+ Standard_Boolean IsDone(const TopoDS_Face& F1,const TopoDS_Face& F2) const;
+ TopTools_MapOfShape& TouchedFaces() ;
+- Handle_BRepAlgo_AsDes AsDes() const;
++ Handle(BRepAlgo_AsDes) AsDes() const;
+ TopTools_MapOfShape& NewEdges() ;
+ Standard_Boolean HasSameDomainF(const TopoDS_Shape& F) const;
+ Standard_Boolean IsSameDomainF(const TopoDS_Shape& F1,const TopoDS_Shape& F2) const;
+ const TopTools_ListOfShape& SameDomain(const TopoDS_Face& F) const;
+ TopoDS_Vertex ReplaceSameDomainV(const TopoDS_Vertex& V,const TopoDS_Edge& E) const;
+- Handle_BRepAlgo_AsDes SectionEdgesAD() const;
++ Handle(BRepAlgo_AsDes) SectionEdgesAD() const;
+ Standard_Boolean IsSectionEdge(const TopoDS_Edge& E) const;
+ Standard_Boolean HasSectionEdge(const TopoDS_Face& F) const;
+ Standard_Boolean IsSplitOn(const TopoDS_Edge& NewE,const TopoDS_Edge& OldE,const TopoDS_Face& F) const;
+@@ -121,11 +123,11 @@
+
+ // Fields PRIVATE
+ //
+- Handle_BRepAlgo_AsDes myAsDes;
++ Handle(BRepAlgo_AsDes) myAsDes;
+ TopTools_DataMapOfShapeListOfShape myDone;
+ TopTools_MapOfShape myTouched;
+ TopTools_MapOfShape myNewEdges;
+- Handle_BRepAlgo_AsDes mySectionEdgesAD;
++ Handle(BRepAlgo_AsDes) mySectionEdgesAD;
+ TopTools_DataMapOfShapeListOfShape mySameDomainFM;
+ TopTools_DataMapOfShapeShape mySameDomainVM;
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop.hxx 2019-11-14 16:56:23.458422865 +0300
+@@ -38,8 +38,6 @@
+ #endif
+ class TopoDS_Face;
+ class TopoDS_Edge;
+-class TopTools_ListOfShape;
+-
+
+ #ifndef _Standard_HeaderFile
+ #include <Standard.hxx>
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop2d.cxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop2d.cxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop2d.cxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop2d.cxx 2019-11-14 16:56:24.290399576 +0300
+@@ -210,7 +210,7 @@
+ Cc->D1(uc, PC, CTg1);
+ if (!isForward) CTg1.Reverse();
+
+- Standard_Real anglemin = 3 * PI, tolAng = 1.e-8;
++ Standard_Real anglemin = 3 * M_PI, tolAng = 1.e-8;
+
+ // select an edge whose first derivative is most left of CTg1
+ // ie an angle between Tg1 and CTg1 is least
+@@ -234,7 +234,7 @@
+ // -PI < angle < PI
+ Standard_Real angle = Tg1.Angle(CTg1);
+
+- if (PI - Abs(angle) <= tolAng)
++ if (M_PI - Abs(angle) <= tolAng)
+ {
+ // an angle is too close to PI; assure that an angle sign really
+ // reflects an edge position: +PI - an edge is worst,
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop2d.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop2d.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop2d.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop2d.hxx 2019-11-14 16:56:23.382424992 +0300
+@@ -24,7 +24,6 @@
+ #endif
+ class TopoDS_Face;
+ class TopoDS_Edge;
+-class TopTools_ListOfShape;
+ class BRepAlgo_Image;
+
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop3d.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop3d.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Loop3d.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Loop3d.hxx 2019-11-14 16:56:23.562419954 +0300
+@@ -13,6 +13,9 @@
+ #ifndef _TopTools_ListOfShape_HeaderFile
+ #include <TopTools_ListOfShape.hxx>
+ #endif
++#ifndef _TopTools_MapOfOrientedShape_HeaderFile
++#include <TopTools_MapOfOrientedShape.hxx>
++#endif
+ #ifndef _TopTools_IndexedDataMapOfShapeListOfShape_HeaderFile
+ #include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
+ #endif
+@@ -23,8 +26,6 @@
+ #include <Standard_Real.hxx>
+ #endif
+ class TopoDS_Shape;
+-class TopTools_ListOfShape;
+-class TopTools_MapOfOrientedShape;
+ class TopoDS_Edge;
+ class TopoDS_Face;
+ class gp_Vec;
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Spliter.cxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Spliter.cxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Spliter.cxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Spliter.cxx 2019-11-14 16:56:23.814412900 +0300
+@@ -48,7 +48,6 @@
+ #include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
+ #include <TopTools_IndexedMapOfShape.hxx>
+ #include <TopTools_ListIteratorOfListOfShape.hxx>
+-#include <TopTools_ListOfShape.hxx>
+ #include <TopTools_MapIteratorOfMapOfShape.hxx>
+ #include <TopTools_SequenceOfShape.hxx>
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Spliter.hxx netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Spliter.hxx
+--- netgen-5.3.1_SRC_orig/libsrc/occ/Partition_Spliter.hxx 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/Partition_Spliter.hxx 2019-11-14 16:56:23.802413236 +0300
+@@ -28,9 +28,6 @@
+ #ifndef _TopTools_DataMapOfShapeShape_HeaderFile
+ #include <TopTools_DataMapOfShapeShape.hxx>
+ #endif
+-#ifndef _Handle_BRepAlgo_AsDes_HeaderFile
+-#include <Handle_BRepAlgo_AsDes.hxx>
+-#endif
+ #ifndef _BRepAlgo_Image_HeaderFile
+ #include <BRepAlgo_Image.hxx>
+ #endif
+@@ -45,7 +42,6 @@
+ #endif
+ class BRepAlgo_AsDes;
+ class TopoDS_Shape;
+-class TopTools_ListOfShape;
+ class TopoDS_Edge;
+
+
+@@ -129,7 +125,7 @@
+ TopTools_DataMapOfShapeShape myFaceShapeMap;
+ TopTools_DataMapOfShapeShape myInternalFaces;
+ TopTools_DataMapOfShapeShape myIntNotClFaces;
+- Handle_BRepAlgo_AsDes myAsDes;
++ Handle(BRepAlgo_AsDes) myAsDes;
+ BRepAlgo_Image myImagesFaces;
+ BRepAlgo_Image myImagesEdges;
+ BRepAlgo_Image myImageShape;
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occconstruction.cpp netgen-5.3.1_SRC_modif/libsrc/occ/occconstruction.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occconstruction.cpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occconstruction.cpp 2019-11-14 16:56:23.822412676 +0300
+@@ -28,7 +28,7 @@
+ #include <BRepAlgoAPI_Common.hxx>
+ #include <BRepAlgoAPI_Fuse.hxx>
+ #include <BRepAlgoAPI_Section.hxx>
+-#include <BRepOffsetAPI_Sewing.hxx>
++//#include <BRepOffsetAPI_Sewing.hxx>
+ //#include <BRepAlgo_Sewing.hxx>
+ #include <BRepOffsetAPI_MakeOffsetShape.hxx>
+ #include <ShapeFix_Shape.hxx>
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occgenmesh.cpp netgen-5.3.1_SRC_modif/libsrc/occ/occgenmesh.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occgenmesh.cpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occgenmesh.cpp 2019-11-14 16:56:23.482422193 +0300
+@@ -1,1467 +1,1570 @@
+-#ifdef OCCGEOMETRY\r
+-\r
+-#include <mystdlib.h>\r
+-#include <occgeom.hpp>\r
+-#include <meshing.hpp>\r
+-\r
+-\r
+-namespace netgen\r
+-{\r
+-\r
+-#include "occmeshsurf.hpp"\r
+-\r
+-#define TCL_OK 0\r
+-#define TCL_ERROR 1\r
+-\r
+-#define DIVIDEEDGESECTIONS 1000\r
+-#define IGNORECURVELENGTH 1e-4\r
+-#define VSMALL 1e-10\r
+-\r
+-\r
+- bool merge_solids = 1;\r
+-\r
+-\r
+- // can you please explain what you intend to compute here (JS) !!!\r
+- double Line :: Dist (Line l)\r
+- {\r
+- Vec<3> n = p1-p0;\r
+- Vec<3> q = l.p1-l.p0;\r
+- double nq = n*q;\r
+-\r
+- Point<3> p = p0 + 0.5*n;\r
+- double lambda = (p-l.p0)*n / (nq + VSMALL);\r
+-\r
+- if (lambda >= 0 && lambda <= 1)\r
+- {\r
+- double d = (p-l.p0-lambda*q).Length();\r
+- // if (d < 1e-3) d = 1e99;\r
+- return d;\r
+- }\r
+- else\r
+- return 1e99;\r
+- }\r
+-\r
+-\r
+-\r
+- double Line :: Length ()\r
+- {\r
+- return (p1-p0).Length();\r
+- }\r
+-\r
+-\r
+-\r
+- inline Point<3> occ2ng (const gp_Pnt & p)\r
+- {\r
+- return Point<3> (p.X(), p.Y(), p.Z());\r
+- }\r
+-\r
+-\r
+-\r
+- double ComputeH (double kappa)\r
+- {\r
+- double hret;\r
+- kappa *= mparam.curvaturesafety;\r
+-\r
+- if (mparam.maxh * kappa < 1)\r
+- hret = mparam.maxh;\r
+- else\r
+- hret = 1 / (kappa + VSMALL);\r
+-\r
+- if (mparam.maxh < hret)\r
+- hret = mparam.maxh;\r
+-\r
+- return (hret);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void RestrictHTriangle (gp_Pnt2d & par0, gp_Pnt2d & par1, gp_Pnt2d & par2,\r
+- BRepLProp_SLProps * prop, Mesh & mesh, int depth, double h = 0)\r
+- {\r
+- int ls = -1;\r
+-\r
+- gp_Pnt pnt0,pnt1,pnt2;\r
+-\r
+- prop->SetParameters (par0.X(), par0.Y());\r
+- pnt0 = prop->Value();\r
+-\r
+- prop->SetParameters (par1.X(), par1.Y());\r
+- pnt1 = prop->Value();\r
+-\r
+- prop->SetParameters (par2.X(), par2.Y());\r
+- pnt2 = prop->Value();\r
+-\r
+- double aux;\r
+- double maxside = pnt0.Distance(pnt1);\r
+- ls = 2;\r
+- aux = pnt1.Distance(pnt2);\r
+- if(aux > maxside)\r
+- {\r
+- maxside = aux;\r
+- ls = 0;\r
+- }\r
+- aux = pnt2.Distance(pnt0);\r
+- if(aux > maxside)\r
+- {\r
+- maxside = aux;\r
+- ls = 1;\r
+- }\r
+-\r
+-\r
+-\r
+- gp_Pnt2d parmid;\r
+-\r
+- parmid.SetX( (par0.X()+par1.X()+par2.X()) / 3 );\r
+- parmid.SetY( (par0.Y()+par1.Y()+par2.Y()) / 3 );\r
+-\r
+- if (depth%3 == 0)\r
+- {\r
+- double curvature = 0;\r
+-\r
+- prop->SetParameters (parmid.X(), parmid.Y());\r
+- if (!prop->IsCurvatureDefined())\r
+- {\r
+- (*testout) << "curvature not defined!" << endl;\r
+- return;\r
+- }\r
+- curvature = max(fabs(prop->MinCurvature()),\r
+- fabs(prop->MaxCurvature()));\r
+-\r
+- prop->SetParameters (par0.X(), par0.Y());\r
+- if (!prop->IsCurvatureDefined())\r
+- {\r
+- (*testout) << "curvature not defined!" << endl;\r
+- return;\r
+- }\r
+- curvature = max(curvature,max(fabs(prop->MinCurvature()),\r
+- fabs(prop->MaxCurvature())));\r
+-\r
+- prop->SetParameters (par1.X(), par1.Y());\r
+- if (!prop->IsCurvatureDefined())\r
+- {\r
+- (*testout) << "curvature not defined!" << endl;\r
+- return;\r
+- }\r
+- curvature = max(curvature,max(fabs(prop->MinCurvature()),\r
+- fabs(prop->MaxCurvature())));\r
+-\r
+- prop->SetParameters (par2.X(), par2.Y());\r
+- if (!prop->IsCurvatureDefined())\r
+- {\r
+- (*testout) << "curvature not defined!" << endl;\r
+- return;\r
+- }\r
+- curvature = max(curvature,max(fabs(prop->MinCurvature()),\r
+- fabs(prop->MaxCurvature())));\r
+-\r
+- //(*testout) << "curvature " << curvature << endl;\r
+-\r
+- if (curvature < 1e-3)\r
+- {\r
+- //(*testout) << "curvature too small (" << curvature << ")!" << endl;\r
+- return;\r
+- // return war bis 10.2.05 auskommentiert\r
+- }\r
+-\r
+-\r
+-\r
+- h = ComputeH (curvature+1e-10);\r
+-\r
+- if(h < 1e-4*maxside)\r
+- return;\r
+-\r
+-\r
+- if (h > 30) return;\r
+- }\r
+-\r
+- if (h < maxside && depth < 10)\r
+- {\r
+- //cout << "\r h " << h << flush;\r
+- gp_Pnt2d pm;\r
+-\r
+- //cout << "h " << h << " maxside " << maxside << " depth " << depth << endl;\r
+- //cout << "par0 " << par0.X() << " " << par0.Y()\r
+- //<< " par1 " << par1.X() << " " << par1.Y()\r
+- // << " par2 " << par2.X() << " " << par2.Y()<< endl;\r
+-\r
+- if(ls == 0)\r
+- {\r
+- pm.SetX(0.5*(par1.X()+par2.X())); pm.SetY(0.5*(par1.Y()+par2.Y()));\r
+- RestrictHTriangle(pm, par2, par0, prop, mesh, depth+1, h);\r
+- RestrictHTriangle(pm, par0, par1, prop, mesh, depth+1, h);\r
+- }\r
+- else if(ls == 1)\r
+- {\r
+- pm.SetX(0.5*(par0.X()+par2.X())); pm.SetY(0.5*(par0.Y()+par2.Y()));\r
+- RestrictHTriangle(pm, par1, par2, prop, mesh, depth+1, h);\r
+- RestrictHTriangle(pm, par0, par1, prop, mesh, depth+1, h);\r
+- }\r
+- else if(ls == 2)\r
+- {\r
+- pm.SetX(0.5*(par0.X()+par1.X())); pm.SetY(0.5*(par0.Y()+par1.Y()));\r
+- RestrictHTriangle(pm, par1, par2, prop, mesh, depth+1, h);\r
+- RestrictHTriangle(pm, par2, par0, prop, mesh, depth+1, h);\r
+- }\r
+-\r
+- }\r
+- else\r
+- {\r
+- gp_Pnt pnt;\r
+- Point3d p3d;\r
+-\r
+- prop->SetParameters (parmid.X(), parmid.Y());\r
+- pnt = prop->Value();\r
+- p3d = Point3d(pnt.X(), pnt.Y(), pnt.Z());\r
+- mesh.RestrictLocalH (p3d, h);\r
+-\r
+- p3d = Point3d(pnt0.X(), pnt0.Y(), pnt0.Z());\r
+- mesh.RestrictLocalH (p3d, h);\r
+-\r
+- p3d = Point3d(pnt1.X(), pnt1.Y(), pnt1.Z());\r
+- mesh.RestrictLocalH (p3d, h);\r
+-\r
+- p3d = Point3d(pnt2.X(), pnt2.Y(), pnt2.Z());\r
+- mesh.RestrictLocalH (p3d, h);\r
+-\r
+- //(*testout) << "p = " << p3d << ", h = " << h << ", maxside = " << maxside << endl;\r
+-\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- void DivideEdge (TopoDS_Edge & edge, Array<MeshPoint> & ps,\r
+- Array<double> & params, Mesh & mesh)\r
+- {\r
+- double s0, s1;\r
+- double maxh = mparam.maxh;\r
+- int nsubedges = 1;\r
+- gp_Pnt pnt, oldpnt;\r
+- double svalue[DIVIDEEDGESECTIONS];\r
+-\r
+- GProp_GProps system;\r
+- BRepGProp::LinearProperties(edge, system);\r
+- double L = system.Mass();\r
+-\r
+- Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);\r
+-\r
+- double hvalue[DIVIDEEDGESECTIONS+1];\r
+- hvalue[0] = 0;\r
+- pnt = c->Value(s0);\r
+-\r
+- double olddist = 0;\r
+- double dist = 0;\r
+-\r
+- int tmpVal = (int)(DIVIDEEDGESECTIONS);\r
+-\r
+- for (int i = 1; i <= tmpVal; i++)\r
+- {\r
+- oldpnt = pnt;\r
+- pnt = c->Value(s0+(i/double(DIVIDEEDGESECTIONS))*(s1-s0));\r
+- hvalue[i] = hvalue[i-1] +\r
+- 1.0/mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z()))*\r
+- pnt.Distance(oldpnt);\r
+-\r
+- //(*testout) << "mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z())) " << mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z()))\r
+- // << " pnt.Distance(oldpnt) " << pnt.Distance(oldpnt) << endl;\r
+-\r
+- olddist = dist;\r
+- dist = pnt.Distance(oldpnt);\r
+- }\r
+-\r
+- // nsubedges = int(ceil(hvalue[DIVIDEEDGESECTIONS]));\r
+- nsubedges = max (1, int(floor(hvalue[DIVIDEEDGESECTIONS]+0.5)));\r
+-\r
+- ps.SetSize(nsubedges-1);\r
+- params.SetSize(nsubedges+1);\r
+-\r
+- int i = 1;\r
+- int i1 = 0;\r
+- do\r
+- {\r
+- if (hvalue[i1]/hvalue[DIVIDEEDGESECTIONS]*nsubedges >= i)\r
+- {\r
+- params[i] = s0+(i1/double(DIVIDEEDGESECTIONS))*(s1-s0);\r
+- pnt = c->Value(params[i]);\r
+- ps[i-1] = MeshPoint (Point3d(pnt.X(), pnt.Y(), pnt.Z()));\r
+- i++;\r
+- }\r
+- i1++;\r
+- if (i1 > DIVIDEEDGESECTIONS)\r
+- {\r
+- nsubedges = i;\r
+- ps.SetSize(nsubedges-1);\r
+- params.SetSize(nsubedges+1);\r
+- cout << "divide edge: local h too small" << endl;\r
+- }\r
+- } while (i < nsubedges);\r
+-\r
+- params[0] = s0;\r
+- params[nsubedges] = s1;\r
+-\r
+- if (params[nsubedges] <= params[nsubedges-1])\r
+- {\r
+- cout << "CORRECTED" << endl;\r
+- ps.SetSize (nsubedges-2);\r
+- params.SetSize (nsubedges);\r
+- params[nsubedges] = s1;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCFindEdges (OCCGeometry & geom, Mesh & mesh)\r
+- {\r
+- const char * savetask = multithread.task;\r
+- multithread.task = "Edge meshing";\r
+-\r
+- (*testout) << "edge meshing" << endl;\r
+-\r
+- int nvertices = geom.vmap.Extent();\r
+- int nedges = geom.emap.Extent();\r
+-\r
+- (*testout) << "nvertices = " << nvertices << endl;\r
+- (*testout) << "nedges = " << nedges << endl;\r
+-\r
+- double eps = 1e-6 * geom.GetBoundingBox().Diam();\r
+-\r
+- for (int i = 1; i <= nvertices; i++)\r
+- {\r
+- gp_Pnt pnt = BRep_Tool::Pnt (TopoDS::Vertex(geom.vmap(i)));\r
+- MeshPoint mp( Point<3>(pnt.X(), pnt.Y(), pnt.Z()) );\r
+-\r
+- bool exists = 0;\r
+- if (merge_solids)\r
+- for (PointIndex pi = 1; pi <= mesh.GetNP(); pi++)\r
+- if ( Dist2 (mesh[pi], Point<3>(mp)) < eps*eps)\r
+- {\r
+- exists = 1;\r
+- break;\r
+- }\r
+-\r
+- if (!exists)\r
+- mesh.AddPoint (mp);\r
+- }\r
+-\r
+- (*testout) << "different vertices = " << mesh.GetNP() << endl;\r
+-\r
+-\r
+- int first_ep = mesh.GetNP()+1;\r
+-\r
+- Array<int> face2solid[2];\r
+- for (int i = 0; i<2; i++)\r
+- {\r
+- face2solid[i].SetSize (geom.fmap.Extent());\r
+- face2solid[i] = 0;\r
+- }\r
+-\r
+- int solidnr = 0;\r
+- for (TopExp_Explorer exp0(geom.shape, TopAbs_SOLID); exp0.More(); exp0.Next())\r
+- {\r
+- solidnr++;\r
+- for (TopExp_Explorer exp1(exp0.Current(), TopAbs_FACE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp1.Current());\r
+- int facenr = geom.fmap.FindIndex(face);\r
+-\r
+- if (face2solid[0][facenr-1] == 0)\r
+- face2solid[0][facenr-1] = solidnr;\r
+- else\r
+- face2solid[1][facenr-1] = solidnr;\r
+- }\r
+- }\r
+-\r
+-\r
+- int total = 0;\r
+- for (int i3 = 1; i3 <= geom.fmap.Extent(); i3++)\r
+- for (TopExp_Explorer exp2(geom.fmap(i3), TopAbs_WIRE); exp2.More(); exp2.Next())\r
+- for (TopExp_Explorer exp3(exp2.Current(), TopAbs_EDGE); exp3.More(); exp3.Next())\r
+- total++;\r
+-\r
+-\r
+- int facenr = 0;\r
+- int edgenr = 0;\r
+-\r
+-\r
+- (*testout) << "faces = " << geom.fmap.Extent() << endl;\r
+- int curr = 0;\r
+-\r
+- for (int i3 = 1; i3 <= geom.fmap.Extent(); i3++)\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(geom.fmap(i3));\r
+- facenr = geom.fmap.FindIndex (face); // sollte doch immer == i3 sein ??? JS\r
+-\r
+- int solidnr0 = face2solid[0][i3-1];\r
+- int solidnr1 = face2solid[1][i3-1];\r
+-\r
+- /* auskommentiert am 3.3.05 von robert\r
+- for (exp2.Init (geom.somap(solidnr0), TopAbs_FACE); exp2.More(); exp2.Next())\r
+- {\r
+- TopoDS_Face face2 = TopoDS::Face(exp2.Current());\r
+- if (geom.fmap.FindIndex(face2) == facenr)\r
+- {\r
+- // if (face.Orientation() != face2.Orientation()) swap (solidnr0, solidnr1);\r
+- }\r
+- }\r
+- */\r
+-\r
+- mesh.AddFaceDescriptor (FaceDescriptor(facenr, solidnr0, solidnr1, 0));\r
+-\r
+- // Philippose - 06/07/2009\r
+- // Add the face colour to the mesh data\r
+- Quantity_Color face_colour;\r
+-\r
+- if(!(geom.face_colours.IsNull())\r
+- && (geom.face_colours->GetColor(face,XCAFDoc_ColorSurf,face_colour)))\r
+- {\r
+- mesh.GetFaceDescriptor(facenr).SetSurfColour(Vec3d(face_colour.Red(),face_colour.Green(),face_colour.Blue()));\r
+- }\r
+- else\r
+- {\r
+- mesh.GetFaceDescriptor(facenr).SetSurfColour(Vec3d(0.0,1.0,0.0));\r
+- }\r
+- // ACHTUNG! STIMMT NICHT ALLGEMEIN (RG)\r
+-\r
+-\r
+- Handle(Geom_Surface) occface = BRep_Tool::Surface(face);\r
+-\r
+- for (TopExp_Explorer exp2 (face, TopAbs_WIRE); exp2.More(); exp2.Next())\r
+- {\r
+- TopoDS_Shape wire = exp2.Current();\r
+-\r
+- for (TopExp_Explorer exp3 (wire, TopAbs_EDGE); exp3.More(); exp3.Next())\r
+- {\r
+- curr++;\r
+- (*testout) << "edge nr " << curr << endl;\r
+-\r
+- multithread.percent = 100 * curr / double (total);\r
+- if (multithread.terminate) return;\r
+-\r
+- TopoDS_Edge edge = TopoDS::Edge (exp3.Current());\r
+- if (BRep_Tool::Degenerated(edge))\r
+- {\r
+- //(*testout) << "ignoring degenerated edge" << endl;\r
+- continue;\r
+- }\r
+-\r
+- if (geom.vmap.FindIndex(TopExp::FirstVertex (edge)) ==\r
+- geom.vmap.FindIndex(TopExp::LastVertex (edge)))\r
+- {\r
+- GProp_GProps system;\r
+- BRepGProp::LinearProperties(edge, system);\r
+-\r
+- if (system.Mass() < eps)\r
+- {\r
+- cout << "ignoring edge " << geom.emap.FindIndex (edge)\r
+- << ". closed edge with length < " << eps << endl;\r
+- continue;\r
+- }\r
+- }\r
+-\r
+-\r
+- Handle(Geom2d_Curve) cof;\r
+- double s0, s1;\r
+- cof = BRep_Tool::CurveOnSurface (edge, face, s0, s1);\r
+-\r
+- int geomedgenr = geom.emap.FindIndex(edge);\r
+-\r
+- Array <MeshPoint> mp;\r
+- Array <double> params;\r
+-\r
+- DivideEdge (edge, mp, params, mesh);\r
+- \r
+- Array <int> pnums;\r
+- pnums.SetSize (mp.Size()+2);\r
+-\r
+- if (!merge_solids)\r
+- {\r
+- pnums[0] = geom.vmap.FindIndex (TopExp::FirstVertex (edge));\r
+- pnums[pnums.Size()-1] = geom.vmap.FindIndex (TopExp::LastVertex (edge));\r
+- }\r
+- else\r
+- {\r
+- Point<3> fp = occ2ng (BRep_Tool::Pnt (TopExp::FirstVertex (edge)));\r
+- Point<3> lp = occ2ng (BRep_Tool::Pnt (TopExp::LastVertex (edge)));\r
+-\r
+- pnums[0] = -1;\r
+- pnums.Last() = -1;\r
+- for (PointIndex pi = 1; pi < first_ep; pi++)\r
+- {\r
+- if (Dist2 (mesh[pi], fp) < eps*eps) pnums[0] = pi;\r
+- if (Dist2 (mesh[pi], lp) < eps*eps) pnums.Last() = pi;\r
+- }\r
+- }\r
+-\r
+-\r
+- for (int i = 1; i <= mp.Size(); i++)\r
+- {\r
+- bool exists = 0;\r
+- int j;\r
+- for (j = first_ep; j <= mesh.GetNP(); j++)\r
+- if ((mesh.Point(j)-Point<3>(mp[i-1])).Length() < eps)\r
+- {\r
+- exists = 1;\r
+- break;\r
+- }\r
+-\r
+- if (exists)\r
+- pnums[i] = j;\r
+- else\r
+- {\r
+- mesh.AddPoint (mp[i-1]);\r
+- (*testout) << "add meshpoint " << mp[i-1] << endl;\r
+- pnums[i] = mesh.GetNP();\r
+- }\r
+- }\r
+- (*testout) << "NP = " << mesh.GetNP() << endl;\r
+-\r
+- //(*testout) << pnums[pnums.Size()-1] << endl;\r
+-\r
+- for (int i = 1; i <= mp.Size()+1; i++)\r
+- {\r
+- edgenr++;\r
+- Segment seg;\r
+-\r
+- seg[0] = pnums[i-1];\r
+- seg[1] = pnums[i];\r
+- seg.edgenr = edgenr;\r
+- seg.si = facenr;\r
+- seg.epgeominfo[0].dist = params[i-1];\r
+- seg.epgeominfo[1].dist = params[i];\r
+- seg.epgeominfo[0].edgenr = geomedgenr;\r
+- seg.epgeominfo[1].edgenr = geomedgenr;\r
+-\r
+- gp_Pnt2d p2d;\r
+- p2d = cof->Value(params[i-1]);\r
+- // if (i == 1) p2d = cof->Value(s0);\r
+- seg.epgeominfo[0].u = p2d.X();\r
+- seg.epgeominfo[0].v = p2d.Y();\r
+- p2d = cof->Value(params[i]);\r
+- // if (i == mp.Size()+1) p2d = cof -> Value(s1);\r
+- seg.epgeominfo[1].u = p2d.X();\r
+- seg.epgeominfo[1].v = p2d.Y();\r
+-\r
+- /*\r
+- if (occface->IsUPeriodic())\r
+- {\r
+- cout << "U Periodic" << endl;\r
+- if (fabs(seg.epgeominfo[1].u-seg.epgeominfo[0].u) >\r
+- fabs(seg.epgeominfo[1].u-\r
+- (seg.epgeominfo[0].u-occface->UPeriod())))\r
+- seg.epgeominfo[0].u = p2d.X()+occface->UPeriod();\r
+-\r
+- if (fabs(seg.epgeominfo[1].u-seg.epgeominfo[0].u) >\r
+- fabs(seg.epgeominfo[1].u-\r
+- (seg.epgeominfo[0].u+occface->UPeriod())))\r
+- seg.epgeominfo[0].u = p2d.X()-occface->UPeriod();\r
+- }\r
+-\r
+- if (occface->IsVPeriodic())\r
+- {\r
+- cout << "V Periodic" << endl;\r
+- if (fabs(seg.epgeominfo[1].v-seg.epgeominfo[0].v) >\r
+- fabs(seg.epgeominfo[1].v-\r
+- (seg.epgeominfo[0].v-occface->VPeriod())))\r
+- seg.epgeominfo[0].v = p2d.Y()+occface->VPeriod();\r
+-\r
+- if (fabs(seg.epgeominfo[1].v-seg.epgeominfo[0].v) >\r
+- fabs(seg.epgeominfo[1].v-\r
+- (seg.epgeominfo[0].v+occface->VPeriod())))\r
+- seg.epgeominfo[0].v = p2d.Y()-occface->VPeriod();\r
+- }\r
+- */\r
+-\r
+- if (edge.Orientation() == TopAbs_REVERSED)\r
+- {\r
+- swap (seg[0], seg[1]);\r
+- swap (seg.epgeominfo[0].dist, seg.epgeominfo[1].dist);\r
+- swap (seg.epgeominfo[0].u, seg.epgeominfo[1].u);\r
+- swap (seg.epgeominfo[0].v, seg.epgeominfo[1].v);\r
+- }\r
+-\r
+- mesh.AddSegment (seg);\r
+-\r
+- //edgesegments[geomedgenr-1]->Append(mesh.GetNSeg());\r
+-\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+- // for(i=1; i<=mesh.GetNSeg(); i++)\r
+- // (*testout) << "edge " << mesh.LineSegment(i).edgenr << " face " << mesh.LineSegment(i).si\r
+- // << " p1 " << mesh.LineSegment(i)[0] << " p2 " << mesh.LineSegment(i)[1] << endl;\r
+- // exit(10);\r
+-\r
+- mesh.CalcSurfacesOfNode();\r
+- multithread.task = savetask;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCMeshSurface (OCCGeometry & geom, Mesh & mesh, int perfstepsend)\r
+- {\r
+- int i, j, k;\r
+- int changed;\r
+-\r
+- const char * savetask = multithread.task;\r
+- multithread.task = "Surface meshing";\r
+-\r
+- geom.facemeshstatus = 0;\r
+-\r
+- int noldp = mesh.GetNP();\r
+-\r
+- double starttime = GetTime();\r
+-\r
+- Array<int> glob2loc(noldp);\r
+-\r
+- //int projecttype = PARAMETERSPACE;\r
+-\r
+- int projecttype = PARAMETERSPACE;\r
+-\r
+- int notrys = 1;\r
+-\r
+- int surfmesherror = 0;\r
+-\r
+- for (k = 1; k <= mesh.GetNFD(); k++)\r
+- {\r
+- if(1==0 && !geom.fvispar[k-1].IsDrawable())\r
+- {\r
+- (*testout) << "ignoring face " << k << endl;\r
+- cout << "ignoring face " << k << endl;\r
+- continue;\r
+- }\r
+-\r
+- (*testout) << "mesh face " << k << endl;\r
+- multithread.percent = 100 * k / (mesh.GetNFD() + VSMALL);\r
+- geom.facemeshstatus[k-1] = -1;\r
+-\r
+-\r
+- /*\r
+- if (k != 42)\r
+- {\r
+- cout << "skipped" << endl;\r
+- continue;\r
+- }\r
+- */\r
+-\r
+-\r
+- FaceDescriptor & fd = mesh.GetFaceDescriptor(k);\r
+-\r
+- int oldnf = mesh.GetNSE();\r
+-\r
+- Box<3> bb = geom.GetBoundingBox();\r
+-\r
+- // int projecttype = PLANESPACE;\r
+-\r
+- Meshing2OCCSurfaces meshing(TopoDS::Face(geom.fmap(k)), bb, projecttype);\r
+-\r
+- if (meshing.GetProjectionType() == PLANESPACE)\r
+- PrintMessage (2, "Face ", k, " / ", mesh.GetNFD(), " (plane space projection)");\r
+- else\r
+- PrintMessage (2, "Face ", k, " / ", mesh.GetNFD(), " (parameter space projection)");\r
+-\r
+- if (surfmesherror)\r
+- cout << "Surface meshing error occured before (in " << surfmesherror << " faces)" << endl;\r
+-\r
+- // Meshing2OCCSurfaces meshing(f2, bb);\r
+- meshing.SetStartTime (starttime);\r
+-\r
+- //(*testout) << "Face " << k << endl << endl;\r
+-\r
+-\r
+- if (meshing.GetProjectionType() == PLANESPACE)\r
+- {\r
+- int cntp = 0;\r
+- glob2loc = 0;\r
+- for (i = 1; i <= mesh.GetNSeg(); i++)\r
+- {\r
+- Segment & seg = mesh.LineSegment(i);\r
+- if (seg.si == k)\r
+- {\r
+- for (j = 1; j <= 2; j++)\r
+- {\r
+- int pi = (j == 1) ? seg[0] : seg[1];\r
+- if (!glob2loc.Get(pi))\r
+- {\r
+- meshing.AddPoint (mesh.Point(pi), pi);\r
+- cntp++;\r
+- glob2loc.Elem(pi) = cntp;\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+- for (i = 1; i <= mesh.GetNSeg(); i++)\r
+- {\r
+- Segment & seg = mesh.LineSegment(i);\r
+- if (seg.si == k)\r
+- {\r
+- PointGeomInfo gi0, gi1;\r
+- gi0.trignum = gi1.trignum = k;\r
+- gi0.u = seg.epgeominfo[0].u;\r
+- gi0.v = seg.epgeominfo[0].v;\r
+- gi1.u = seg.epgeominfo[1].u;\r
+- gi1.v = seg.epgeominfo[1].v;\r
+-\r
+- meshing.AddBoundaryElement (glob2loc.Get(seg[0]), glob2loc.Get(seg[1]), gi0, gi1);\r
+- //(*testout) << gi0.u << " " << gi0.v << endl;\r
+- //(*testout) << gi1.u << " " << gi1.v << endl;\r
+- }\r
+- }\r
+- }\r
+- else\r
+- {\r
+- int cntp = 0;\r
+-\r
+- for (i = 1; i <= mesh.GetNSeg(); i++)\r
+- if (mesh.LineSegment(i).si == k)\r
+- cntp+=2;\r
+-\r
+-\r
+- Array< PointGeomInfo > gis;\r
+-\r
+- gis.SetAllocSize (cntp);\r
+- gis.SetSize (0);\r
+-\r
+- for (i = 1; i <= mesh.GetNSeg(); i++)\r
+- {\r
+- Segment & seg = mesh.LineSegment(i);\r
+- if (seg.si == k)\r
+- {\r
+- PointGeomInfo gi0, gi1;\r
+- gi0.trignum = gi1.trignum = k;\r
+- gi0.u = seg.epgeominfo[0].u;\r
+- gi0.v = seg.epgeominfo[0].v;\r
+- gi1.u = seg.epgeominfo[1].u;\r
+- gi1.v = seg.epgeominfo[1].v;\r
+-\r
+- int locpnum[2] = {0, 0};\r
+-\r
+- for (j = 0; j < 2; j++)\r
+- {\r
+- PointGeomInfo gi = (j == 0) ? gi0 : gi1;\r
+-\r
+- int l;\r
+- for (l = 0; l < gis.Size() && locpnum[j] == 0; l++)\r
+- {\r
+- double dist = sqr (gis[l].u-gi.u)+sqr(gis[l].v-gi.v);\r
+-\r
+- if (dist < 1e-10)\r
+- locpnum[j] = l+1;\r
+- }\r
+-\r
+- if (locpnum[j] == 0)\r
+- {\r
+- int pi = (j == 0) ? seg[0] : seg[1];\r
+- meshing.AddPoint (mesh.Point(pi), pi);\r
+-\r
+- gis.SetSize (gis.Size()+1);\r
+- gis[l] = gi;\r
+- locpnum[j] = l+1;\r
+- }\r
+- }\r
+-\r
+- meshing.AddBoundaryElement (locpnum[0], locpnum[1], gi0, gi1);\r
+- //(*testout) << gi0.u << " " << gi0.v << endl;\r
+- //(*testout) << gi1.u << " " << gi1.v << endl;\r
+-\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+- // Philippose - 15/01/2009\r
+- double maxh = geom.face_maxh[k-1];\r
+- //double maxh = mparam.maxh;\r
+- mparam.checkoverlap = 0;\r
+- // int noldpoints = mesh->GetNP();\r
+- int noldsurfel = mesh.GetNSE();\r
+-\r
+- GProp_GProps sprops;\r
+- BRepGProp::SurfaceProperties(TopoDS::Face(geom.fmap(k)),sprops);\r
+- meshing.SetMaxArea(2.*sprops.Mass());\r
+-\r
+- MESHING2_RESULT res;\r
+-\r
+- try {\r
+- res = meshing.GenerateMesh (mesh, mparam, maxh, k);\r
+- }\r
+-\r
+- catch (SingularMatrixException)\r
+- {\r
+- (*myerr) << "Singular Matrix" << endl;\r
+- res = MESHING2_GIVEUP;\r
+- }\r
+-\r
+- catch (UVBoundsException)\r
+- {\r
+- (*myerr) << "UV bounds exceeded" << endl;\r
+- res = MESHING2_GIVEUP;\r
+- }\r
+-\r
+- projecttype = PARAMETERSPACE;\r
+-\r
+- if (res != MESHING2_OK)\r
+- {\r
+- if (notrys == 1)\r
+- {\r
+- for (int i = noldsurfel+1; i <= mesh.GetNSE(); i++)\r
+- mesh.DeleteSurfaceElement (i);\r
+-\r
+- mesh.Compress();\r
+-\r
+- cout << "retry Surface " << k << endl;\r
+-\r
+- k--;\r
+- projecttype*=-1;\r
+- notrys++;\r
+- continue;\r
+- }\r
+- else\r
+- {\r
+- geom.facemeshstatus[k-1] = -1;\r
+- PrintError ("Problem in Surface mesh generation");\r
+- surfmesherror++;\r
+- // throw NgException ("Problem in Surface mesh generation");\r
+- }\r
+- }\r
+- else\r
+- {\r
+- geom.facemeshstatus[k-1] = 1;\r
+- }\r
+-\r
+- notrys = 1;\r
+-\r
+- for (i = oldnf+1; i <= mesh.GetNSE(); i++)\r
+- mesh.SurfaceElement(i).SetIndex (k);\r
+-\r
+- }\r
+-\r
+-// ofstream problemfile("occmesh.rep");\r
+-\r
+-// problemfile << "SURFACEMESHING" << endl << endl;\r
+-\r
+- if (surfmesherror)\r
+- {\r
+- cout << "WARNING! NOT ALL FACES HAVE BEEN MESHED" << endl;\r
+- cout << "SURFACE MESHING ERROR OCCURED IN " << surfmesherror << " FACES:" << endl;\r
+- for (int i = 1; i <= geom.fmap.Extent(); i++)\r
+- if (geom.facemeshstatus[i-1] == -1)\r
+- {\r
+- cout << "Face " << i << endl;\r
+-// problemfile << "problem with face " << i << endl;\r
+-// problemfile << "vertices: " << endl;\r
+- TopExp_Explorer exp0,exp1,exp2;\r
+- for ( exp0.Init(TopoDS::Face (geom.fmap(i)), TopAbs_WIRE); exp0.More(); exp0.Next() )\r
+- {\r
+- TopoDS_Wire wire = TopoDS::Wire(exp0.Current());\r
+- for ( exp1.Init(wire,TopAbs_EDGE); exp1.More(); exp1.Next() )\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- for ( exp2.Init(edge,TopAbs_VERTEX); exp2.More(); exp2.Next() )\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp2.Current());\r
+- gp_Pnt point = BRep_Tool::Pnt(vertex);\r
+-// problemfile << point.X() << " " << point.Y() << " " << point.Z() << endl;\r
+- }\r
+- }\r
+- }\r
+-// problemfile << endl;\r
+-\r
+- }\r
+- cout << endl << endl;\r
+- cout << "for more information open IGES/STEP Topology Explorer" << endl;\r
+-// problemfile.close();\r
+- throw NgException ("Problem in Surface mesh generation");\r
+- }\r
+- else\r
+- {\r
+-// problemfile << "OK" << endl << endl;\r
+-// problemfile.close();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- if (multithread.terminate || perfstepsend < MESHCONST_OPTSURFACE)\r
+- return;\r
+-\r
+- multithread.task = "Optimizing surface";\r
+-\r
+- static int timer_opt2d = NgProfiler::CreateTimer ("Optimization 2D");\r
+- NgProfiler::StartTimer (timer_opt2d);\r
+-\r
+- for (k = 1; k <= mesh.GetNFD(); k++)\r
+- {\r
+- // if (k != 42) continue;\r
+- // if (k != 36) continue;\r
+-\r
+- // (*testout) << "optimize face " << k << endl;\r
+- multithread.percent = 100 * k / (mesh.GetNFD() + VSMALL);\r
+-\r
+- FaceDescriptor & fd = mesh.GetFaceDescriptor(k);\r
+-\r
+- PrintMessage (1, "Optimize Surface ", k);\r
+- for (i = 1; i <= mparam.optsteps2d; i++)\r
+- {\r
+- // (*testout) << "optstep " << i << endl;\r
+- if (multithread.terminate) return;\r
+-\r
+- {\r
+- MeshOptimize2dOCCSurfaces meshopt(geom);\r
+- meshopt.SetFaceIndex (k);\r
+- meshopt.SetImproveEdges (0);\r
+- meshopt.SetMetricWeight (mparam.elsizeweight);\r
+- //meshopt.SetMetricWeight (0.2);\r
+- meshopt.SetWriteStatus (0);\r
+-\r
+- // (*testout) << "EdgeSwapping (mesh, (i > mparam.optsteps2d/2))" << endl;\r
+- meshopt.EdgeSwapping (mesh, (i > mparam.optsteps2d/2));\r
+- }\r
+-\r
+- if (multithread.terminate) return;\r
+- {\r
+- MeshOptimize2dOCCSurfaces meshopt(geom);\r
+- meshopt.SetFaceIndex (k);\r
+- meshopt.SetImproveEdges (0);\r
+- //meshopt.SetMetricWeight (0.2);\r
+- meshopt.SetMetricWeight (mparam.elsizeweight);\r
+- meshopt.SetWriteStatus (0);\r
+-\r
+- // (*testout) << "ImproveMesh (mesh)" << endl;\r
+- meshopt.ImproveMesh (mesh, mparam);\r
+- }\r
+-\r
+- {\r
+- MeshOptimize2dOCCSurfaces meshopt(geom);\r
+- meshopt.SetFaceIndex (k);\r
+- meshopt.SetImproveEdges (0);\r
+- //meshopt.SetMetricWeight (0.2);\r
+- meshopt.SetMetricWeight (mparam.elsizeweight);\r
+- meshopt.SetWriteStatus (0);\r
+-\r
+- // (*testout) << "CombineImprove (mesh)" << endl;\r
+- meshopt.CombineImprove (mesh);\r
+- }\r
+-\r
+- if (multithread.terminate) return;\r
+- {\r
+- MeshOptimize2dOCCSurfaces meshopt(geom);\r
+- meshopt.SetFaceIndex (k);\r
+- meshopt.SetImproveEdges (0);\r
+- //meshopt.SetMetricWeight (0.2);\r
+- meshopt.SetMetricWeight (mparam.elsizeweight);\r
+- meshopt.SetWriteStatus (0);\r
+-\r
+- // (*testout) << "ImproveMesh (mesh)" << endl;\r
+- meshopt.ImproveMesh (mesh, mparam);\r
+- }\r
+- }\r
+-\r
+- }\r
+-\r
+-\r
+- mesh.CalcSurfacesOfNode();\r
+- mesh.Compress();\r
+-\r
+- NgProfiler::StopTimer (timer_opt2d);\r
+-\r
+- multithread.task = savetask;\r
+- }\r
+-\r
+-\r
+-\r
+- void OCCSetLocalMeshSize(OCCGeometry & geom, Mesh & mesh)\r
+- {\r
+- mesh.SetGlobalH (mparam.maxh);\r
+- mesh.SetMinimalH (mparam.minh);\r
+-\r
+- Array<double> maxhdom;\r
+- maxhdom.SetSize (geom.NrSolids());\r
+- maxhdom = mparam.maxh;\r
+-\r
+- mesh.SetMaxHDomain (maxhdom);\r
+-\r
+- Box<3> bb = geom.GetBoundingBox();\r
+- bb.Increase (bb.Diam()/10);\r
+-\r
+- mesh.SetLocalH (bb.PMin(), bb.PMax(), 0.5);\r
+-\r
+- if (mparam.uselocalh)\r
+- {\r
+- const char * savetask = multithread.task;\r
+- multithread.percent = 0;\r
+-\r
+- mesh.SetLocalH (bb.PMin(), bb.PMax(), mparam.grading);\r
+-\r
+- int nedges = geom.emap.Extent();\r
+-\r
+- double mincurvelength = IGNORECURVELENGTH;\r
+- double maxedgelen = 0;\r
+- double minedgelen = 1e99;\r
+-\r
+- if(occparam.resthminedgelenenable) \r
+- {\r
+- mincurvelength = occparam.resthminedgelen;\r
+- if(mincurvelength < IGNORECURVELENGTH) mincurvelength = IGNORECURVELENGTH;\r
+- }\r
+-\r
+- multithread.task = "Setting local mesh size (elements per edge)";\r
+-\r
+- // setting elements per edge\r
+-\r
+- for (int i = 1; i <= nedges && !multithread.terminate; i++)\r
+- {\r
+- TopoDS_Edge e = TopoDS::Edge (geom.emap(i));\r
+- multithread.percent = 100 * (i-1)/double(nedges);\r
+- if (BRep_Tool::Degenerated(e)) continue;\r
+-\r
+- GProp_GProps system;\r
+- BRepGProp::LinearProperties(e, system);\r
+- double len = system.Mass();\r
+-\r
+- if (len < mincurvelength)\r
+- {\r
+- (*testout) << "ignored" << endl;\r
+- continue;\r
+- }\r
+-\r
+- double localh = len/mparam.segmentsperedge;\r
+- double s0, s1;\r
+-\r
+- // Philippose - 23/01/2009\r
+- // Find all the parent faces of a given edge\r
+- // and limit the mesh size of the edge based on the\r
+- // mesh size limit of the face\r
+- TopTools_IndexedDataMapOfShapeListOfShape edge_face_map;\r
+- edge_face_map.Clear();\r
+-\r
+- TopExp::MapShapesAndAncestors(geom.shape, TopAbs_EDGE, TopAbs_FACE, edge_face_map);\r
+- const TopTools_ListOfShape& parent_faces = edge_face_map.FindFromKey(e);\r
+-\r
+- TopTools_ListIteratorOfListOfShape parent_face_list;\r
+-\r
+- for(parent_face_list.Initialize(parent_faces); parent_face_list.More(); parent_face_list.Next())\r
+- {\r
+- TopoDS_Face parent_face = TopoDS::Face(parent_face_list.Value());\r
+-\r
+- int face_index = geom.fmap.FindIndex(parent_face);\r
+-\r
+- if(face_index >= 1) localh = min(localh,geom.face_maxh[face_index - 1]);\r
+- }\r
+-\r
+- Handle(Geom_Curve) c = BRep_Tool::Curve(e, s0, s1);\r
+-\r
+- maxedgelen = max (maxedgelen, len);\r
+- minedgelen = min (minedgelen, len);\r
+-\r
+- // Philippose - 23/01/2009\r
+- // Modified the calculation of maxj, because the\r
+- // method used so far always results in maxj = 2,\r
+- // which causes the localh to be set only at the\r
+- // starting, mid and end of the edge.\r
+- // Old Algorithm:\r
+- // int maxj = 2 * (int) ceil (localh/len);\r
+- int maxj = max((int) ceil(len/localh), 2);\r
+-\r
+- for (int j = 0; j <= maxj; j++)\r
+- {\r
+- gp_Pnt pnt = c->Value (s0+double(j)/maxj*(s1-s0));\r
+- mesh.RestrictLocalH (Point3d(pnt.X(), pnt.Y(), pnt.Z()), localh);\r
+- }\r
+- }\r
+-\r
+- multithread.task = "Setting local mesh size (edge curvature)";\r
+-\r
+- // setting edge curvature\r
+-\r
+- int nsections = 20;\r
+-\r
+- for (int i = 1; i <= nedges && !multithread.terminate; i++)\r
+- {\r
+- double maxcur = 0;\r
+- multithread.percent = 100 * (i-1)/double(nedges);\r
+- TopoDS_Edge edge = TopoDS::Edge (geom.emap(i));\r
+- if (BRep_Tool::Degenerated(edge)) continue;\r
+- double s0, s1;\r
+- Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);\r
+- BRepAdaptor_Curve brepc(edge);\r
+- BRepLProp_CLProps prop(brepc, 2, 1e-5);\r
+-\r
+- for (int j = 1; j <= nsections; j++)\r
+- {\r
+- double s = s0 + j/(double) nsections * (s1-s0);\r
+- prop.SetParameter (s);\r
+- double curvature = prop.Curvature();\r
+- if(curvature> maxcur) maxcur = curvature;\r
+-\r
+- if (curvature >= 1e99)\r
+- continue;\r
+-\r
+- gp_Pnt pnt = c->Value (s);\r
+-\r
+- mesh.RestrictLocalH (Point3d(pnt.X(), pnt.Y(), pnt.Z()), ComputeH (fabs(curvature)));\r
+- }\r
+- // (*testout) << "edge " << i << " max. curvature: " << maxcur << endl;\r
+- }\r
+-\r
+- multithread.task = "Setting local mesh size (face curvature)";\r
+-\r
+- // setting face curvature\r
+-\r
+- int nfaces = geom.fmap.Extent();\r
+-\r
+- for (int i = 1; i <= nfaces && !multithread.terminate; i++)\r
+- {\r
+- multithread.percent = 100 * (i-1)/double(nfaces);\r
+- TopoDS_Face face = TopoDS::Face(geom.fmap(i));\r
+- TopLoc_Location loc;\r
+- Handle(Geom_Surface) surf = BRep_Tool::Surface (face);\r
+- Handle(Poly_Triangulation) triangulation = BRep_Tool::Triangulation (face, loc);\r
+-\r
+- if (triangulation.IsNull()) continue;\r
+-\r
+- BRepAdaptor_Surface sf(face, Standard_True);\r
+- BRepLProp_SLProps prop(sf, 2, 1e-5);\r
+-\r
+- int ntriangles = triangulation -> NbTriangles();\r
+- for (int j = 1; j <= ntriangles; j++)\r
+- {\r
+- gp_Pnt p[3];\r
+- gp_Pnt2d par[3];\r
+-\r
+- for (int k = 1; k <=3; k++)\r
+- {\r
+- int n = triangulation->Triangles()(j)(k);\r
+- p[k-1] = triangulation->Nodes()(n).Transformed(loc);\r
+- par[k-1] = triangulation->UVNodes()(n);\r
+- }\r
+-\r
+- //double maxside = 0;\r
+- //maxside = max (maxside, p[0].Distance(p[1]));\r
+- //maxside = max (maxside, p[0].Distance(p[2]));\r
+- //maxside = max (maxside, p[1].Distance(p[2]));\r
+- //cout << "\rFace " << i << " pos11 ntriangles " << ntriangles << " maxside " << maxside << flush;\r
+-\r
+- RestrictHTriangle (par[0], par[1], par[2], &prop, mesh, 0);\r
+- //cout << "\rFace " << i << " pos12 ntriangles " << ntriangles << flush;\r
+- }\r
+- }\r
+-\r
+- // setting close edges\r
+-\r
+- if (occparam.resthcloseedgeenable)\r
+- {\r
+- multithread.task = "Setting local mesh size (close edges)";\r
+-\r
+- int sections = 100;\r
+-\r
+- Array<Line> lines(sections*nedges);\r
+-\r
+- Box3dTree* searchtree =\r
+- new Box3dTree (bb.PMin(), bb.PMax());\r
+-\r
+- int nlines = 0;\r
+- for (int i = 1; i <= nedges && !multithread.terminate; i++)\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge (geom.emap(i));\r
+- if (BRep_Tool::Degenerated(edge)) continue;\r
+-\r
+- double s0, s1;\r
+- Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);\r
+- BRepAdaptor_Curve brepc(edge);\r
+- BRepLProp_CLProps prop(brepc, 1, 1e-5);\r
+- prop.SetParameter (s0);\r
+-\r
+- gp_Vec d0 = prop.D1().Normalized();\r
+- double s_start = s0;\r
+- int count = 0;\r
+- for (int j = 1; j <= sections; j++)\r
+- {\r
+- double s = s0 + (s1-s0)*(double)j/(double)sections;\r
+- prop.SetParameter (s);\r
+- gp_Vec d1 = prop.D1().Normalized();\r
+- double cosalpha = fabs(d0*d1);\r
+- if ((j == sections) || (cosalpha < cos(10.0/180.0*M_PI)))\r
+- {\r
+- count++;\r
+- gp_Pnt p0 = c->Value (s_start);\r
+- gp_Pnt p1 = c->Value (s);\r
+- lines[nlines].p0 = Point<3> (p0.X(), p0.Y(), p0.Z());\r
+- lines[nlines].p1 = Point<3> (p1.X(), p1.Y(), p1.Z());\r
+-\r
+- Box3d box;\r
+- box.SetPoint (Point3d(lines[nlines].p0));\r
+- box.AddPoint (Point3d(lines[nlines].p1));\r
+-\r
+- searchtree->Insert (box.PMin(), box.PMax(), nlines+1);\r
+- nlines++;\r
+-\r
+- s_start = s;\r
+- d0 = d1;\r
+- }\r
+- }\r
+- }\r
+-\r
+- Array<int> linenums;\r
+-\r
+- for (int i = 0; i < nlines; i++)\r
+- {\r
+- multithread.percent = (100*i)/double(nlines);\r
+- Line & line = lines[i];\r
+-\r
+- Box3d box;\r
+- box.SetPoint (Point3d(line.p0));\r
+- box.AddPoint (Point3d(line.p1));\r
+- double maxhline = max (mesh.GetH(box.PMin()),\r
+- mesh.GetH(box.PMax()));\r
+- box.Increase(maxhline);\r
+-\r
+- double mindist = 1e99;\r
+- linenums.SetSize(0);\r
+- searchtree->GetIntersecting(box.PMin(),box.PMax(),linenums);\r
+-\r
+- for (int j = 0; j < linenums.Size(); j++)\r
+- {\r
+- int num = linenums[j]-1;\r
+- if (i == num) continue;\r
+- if ((line.p0-lines[num].p0).Length2() < 1e-15) continue;\r
+- if ((line.p0-lines[num].p1).Length2() < 1e-15) continue;\r
+- if ((line.p1-lines[num].p0).Length2() < 1e-15) continue;\r
+- if ((line.p1-lines[num].p1).Length2() < 1e-15) continue;\r
+- mindist = min (mindist, line.Dist(lines[num]));\r
+- }\r
+-\r
+- mindist /= (occparam.resthcloseedgefac + VSMALL);\r
+-\r
+- if (mindist < 1e-3)\r
+- {\r
+- (*testout) << "extremely small local h: " << mindist\r
+- << " --> setting to 1e-3" << endl;\r
+- (*testout) << "somewhere near " << line.p0 << " - " << line.p1 << endl;\r
+- mindist = 1e-3;\r
+- }\r
+-\r
+- mesh.RestrictLocalHLine(line.p0, line.p1, mindist);\r
+- }\r
+- }\r
+-\r
+- multithread.task = savetask;\r
+-\r
+- }\r
+-\r
+- // Philippose - 09/03/2009\r
+- // Added the capability to load the mesh size from a \r
+- // file also for OpenCascade Geometry\r
+- // Note: \r
+- // ** If the "uselocalh" option is ticked in \r
+- // the "mesh options...insider" menu, the mesh \r
+- // size will be further modified by the topology \r
+- // analysis routines.\r
+- // ** To use the mesh size file as the sole source \r
+- // for defining the mesh size, uncheck the "uselocalh"\r
+- // option.\r
+- mesh.LoadLocalMeshSize (mparam.meshsizefilename);\r
+- }\r
+-\r
+-\r
+-\r
+- int OCCGenerateMesh (OCCGeometry & geom, Mesh *& mesh, MeshingParameters & mparam,\r
+- int perfstepsstart, int perfstepsend)\r
+- {\r
+- multithread.percent = 0;\r
+-\r
+- if (perfstepsstart <= MESHCONST_ANALYSE)\r
+- {\r
+- delete mesh;\r
+- mesh = new Mesh();\r
+- mesh->geomtype = Mesh::GEOM_OCC;\r
+-\r
+- OCCSetLocalMeshSize(geom,*mesh);\r
+- }\r
+-\r
+- if (multithread.terminate || perfstepsend <= MESHCONST_ANALYSE)\r
+- return TCL_OK;\r
+-\r
+- if (perfstepsstart <= MESHCONST_MESHEDGES)\r
+- {\r
+- OCCFindEdges (geom, *mesh);\r
+-\r
+- /*\r
+- cout << "Removing redundant points" << endl;\r
+-\r
+- int i, j;\r
+- int np = mesh->GetNP();\r
+- Array<int> equalto;\r
+-\r
+- equalto.SetSize (np);\r
+- equalto = 0;\r
+-\r
+- for (i = 1; i <= np; i++)\r
+- {\r
+- for (j = i+1; j <= np; j++)\r
+- {\r
+- if (!equalto[j-1] && (Dist2 (mesh->Point(i), mesh->Point(j)) < 1e-12))\r
+- equalto[j-1] = i;\r
+- }\r
+- }\r
+-\r
+- for (i = 1; i <= np; i++)\r
+- if (equalto[i-1])\r
+- {\r
+- cout << "Point " << i << " is equal to Point " << equalto[i-1] << endl;\r
+- for (j = 1; j <= mesh->GetNSeg(); j++)\r
+- {\r
+- Segment & seg = mesh->LineSegment(j);\r
+- if (seg[0] == i) seg[0] = equalto[i-1];\r
+- if (seg[1] == i) seg[1] = equalto[i-1];\r
+- }\r
+- }\r
+-\r
+- cout << "Removing degenerated segments" << endl;\r
+- for (j = 1; j <= mesh->GetNSeg(); j++)\r
+- {\r
+- Segment & seg = mesh->LineSegment(j);\r
+- if (seg[0] == seg[1])\r
+- {\r
+- mesh->DeleteSegment(j);\r
+- cout << "Deleting Segment " << j << endl;\r
+- }\r
+- }\r
+-\r
+- mesh->Compress();\r
+- */\r
+-\r
+- /*\r
+- for (int i = 1; i <= geom.fmap.Extent(); i++)\r
+- {\r
+- Handle(Geom_Surface) hf1 =\r
+- BRep_Tool::Surface(TopoDS::Face(geom.fmap(i)));\r
+- for (int j = i+1; j <= geom.fmap.Extent(); j++)\r
+- {\r
+- Handle(Geom_Surface) hf2 =\r
+- BRep_Tool::Surface(TopoDS::Face(geom.fmap(j)));\r
+- if (hf1 == hf2) cout << "face " << i << " and face " << j << " lie on same surface" << endl;\r
+- }\r
+- }\r
+- */\r
+-\r
+-#ifdef LOG_STREAM\r
+- (*logout) << "Edges meshed" << endl\r
+- << "time = " << GetTime() << " sec" << endl\r
+- << "points: " << mesh->GetNP() << endl;\r
+-#endif\r
+- }\r
+-\r
+- if (multithread.terminate || perfstepsend <= MESHCONST_MESHEDGES)\r
+- return TCL_OK;\r
+-\r
+- if (perfstepsstart <= MESHCONST_MESHSURFACE)\r
+- {\r
+- OCCMeshSurface (geom, *mesh, perfstepsend);\r
+- if (multithread.terminate) return TCL_OK;\r
+-\r
+-#ifdef LOG_STREAM\r
+- (*logout) << "Surfaces meshed" << endl\r
+- << "time = " << GetTime() << " sec" << endl\r
+- << "points: " << mesh->GetNP() << endl;\r
+-#endif\r
+-\r
+-#ifdef STAT_STREAM\r
+- (*statout) << mesh->GetNSeg() << " & "\r
+- << mesh->GetNSE() << " & - &"\r
+- << GetTime() << " & " << endl;\r
+-#endif\r
+-\r
+- // MeshQuality2d (*mesh);\r
+- mesh->CalcSurfacesOfNode();\r
+- }\r
+-\r
+- if (multithread.terminate || perfstepsend <= MESHCONST_OPTSURFACE)\r
+- return TCL_OK;\r
+-\r
+- if (perfstepsstart <= MESHCONST_MESHVOLUME)\r
+- {\r
+- multithread.task = "Volume meshing";\r
+-\r
+- MESHING3_RESULT res = MeshVolume (mparam, *mesh);\r
+-\r
+-/*\r
+- ofstream problemfile("occmesh.rep",ios_base::app);\r
+-\r
+- problemfile << "VOLUMEMESHING" << endl << endl;\r
+- if(res != MESHING3_OK)\r
+- problemfile << "ERROR" << endl << endl;\r
+- else\r
+- problemfile << "OK" << endl\r
+- << mesh->GetNE() << " elements" << endl << endl;\r
+-\r
+- problemfile.close();\r
+-*/\r
+-\r
+- if (res != MESHING3_OK) return TCL_ERROR;\r
+-\r
+- if (multithread.terminate) return TCL_OK;\r
+-\r
+- RemoveIllegalElements (*mesh);\r
+- if (multithread.terminate) return TCL_OK;\r
+-\r
+- MeshQuality3d (*mesh);\r
+-\r
+-#ifdef STAT_STREAM\r
+- (*statout) << GetTime() << " & ";\r
+-#endif\r
+-\r
+-#ifdef LOG_STREAM\r
+- (*logout) << "Volume meshed" << endl\r
+- << "time = " << GetTime() << " sec" << endl\r
+- << "points: " << mesh->GetNP() << endl;\r
+-#endif\r
+- }\r
+-\r
+- if (multithread.terminate || perfstepsend <= MESHCONST_MESHVOLUME)\r
+- return TCL_OK;\r
+-\r
+- if (perfstepsstart <= MESHCONST_OPTVOLUME)\r
+- {\r
+- multithread.task = "Volume optimization";\r
+-\r
+- OptimizeVolume (mparam, *mesh);\r
+- if (multithread.terminate) return TCL_OK;\r
+-\r
+-#ifdef STAT_STREAM\r
+- (*statout) << GetTime() << " & "\r
+- << mesh->GetNE() << " & "\r
+- << mesh->GetNP() << " " << '\\' << '\\' << " \\" << "hline" << endl;\r
+-#endif\r
+-\r
+-#ifdef LOG_STREAM\r
+- (*logout) << "Volume optimized" << endl\r
+- << "time = " << GetTime() << " sec" << endl\r
+- << "points: " << mesh->GetNP() << endl;\r
+-#endif\r
+-\r
+- // cout << "Optimization complete" << endl;\r
+-\r
+- }\r
+-\r
+- (*testout) << "NP: " << mesh->GetNP() << endl;\r
+- for (int i = 1; i <= mesh->GetNP(); i++)\r
+- (*testout) << mesh->Point(i) << endl;\r
+-\r
+- (*testout) << endl << "NSegments: " << mesh->GetNSeg() << endl;\r
+- for (int i = 1; i <= mesh->GetNSeg(); i++)\r
+- (*testout) << mesh->LineSegment(i) << endl;\r
+-\r
+- return TCL_OK;\r
+- }\r
+-}\r
+-\r
+-#endif\r
++#ifdef OCCGEOMETRY
++
++#include <mystdlib.h>
++#include <occgeom.hpp>
++#include <meshing.hpp>
++
++
++namespace netgen
++{
++
++#include "occmeshsurf.hpp"
++
++#define TCL_OK 0
++#define TCL_ERROR 1
++
++#define DIVIDEEDGESECTIONS 1000
++#define IGNORECURVELENGTH 1e-4
++#define VSMALL 1e-10
++
++
++ bool merge_solids = 1;
++
++
++ // can you please explain what you intend to compute here (JS) !!!
++ double Line :: Dist (Line l)
++ {
++ Vec<3> n = p1-p0;
++ Vec<3> q = l.p1-l.p0;
++ double nq = n*q;
++
++ Point<3> p = p0 + 0.5*n;
++ double lambda = (p-l.p0)*n / (nq + VSMALL);
++
++ if (lambda >= 0 && lambda <= 1)
++ {
++ double d = (p-l.p0-lambda*q).Length();
++ // if (d < 1e-3) d = 1e99;
++ return d;
++ }
++ else
++ return 1e99;
++ }
++
++
++
++ double Line :: Length ()
++ {
++ return (p1-p0).Length();
++ }
++
++
++
++ inline Point<3> occ2ng (const gp_Pnt & p)
++ {
++ return Point<3> (p.X(), p.Y(), p.Z());
++ }
++
++
++
++ double ComputeH (double kappa)
++ {
++ double hret;
++ kappa *= mparam.curvaturesafety;
++
++ if (mparam.maxh * kappa < 1)
++ hret = mparam.maxh;
++ else
++ hret = 1 / (kappa + VSMALL);
++
++ if (mparam.maxh < hret)
++ hret = mparam.maxh;
++
++ return (hret);
++ }
++
++
++
++
++ void RestrictHTriangle (gp_Pnt2d & par0, gp_Pnt2d & par1, gp_Pnt2d & par2,
++ BRepLProp_SLProps * prop, Mesh & mesh, int depth, double h = 0)
++ {
++ int ls = -1;
++
++ gp_Pnt pnt0,pnt1,pnt2;
++
++ prop->SetParameters (par0.X(), par0.Y());
++ pnt0 = prop->Value();
++
++ prop->SetParameters (par1.X(), par1.Y());
++ pnt1 = prop->Value();
++
++ prop->SetParameters (par2.X(), par2.Y());
++ pnt2 = prop->Value();
++
++ double aux;
++ double maxside = pnt0.Distance(pnt1);
++ ls = 2;
++ aux = pnt1.Distance(pnt2);
++ if(aux > maxside)
++ {
++ maxside = aux;
++ ls = 0;
++ }
++ aux = pnt2.Distance(pnt0);
++ if(aux > maxside)
++ {
++ maxside = aux;
++ ls = 1;
++ }
++
++
++
++ gp_Pnt2d parmid;
++
++ parmid.SetX( (par0.X()+par1.X()+par2.X()) / 3 );
++ parmid.SetY( (par0.Y()+par1.Y()+par2.Y()) / 3 );
++
++ if (depth%3 == 0)
++ {
++ double curvature = 0;
++
++ prop->SetParameters (parmid.X(), parmid.Y());
++ if (!prop->IsCurvatureDefined())
++ {
++ (*testout) << "curvature not defined!" << endl;
++ return;
++ }
++ curvature = max(fabs(prop->MinCurvature()),
++ fabs(prop->MaxCurvature()));
++
++ prop->SetParameters (par0.X(), par0.Y());
++ if (!prop->IsCurvatureDefined())
++ {
++ (*testout) << "curvature not defined!" << endl;
++ return;
++ }
++ curvature = max(curvature,max(fabs(prop->MinCurvature()),
++ fabs(prop->MaxCurvature())));
++
++ prop->SetParameters (par1.X(), par1.Y());
++ if (!prop->IsCurvatureDefined())
++ {
++ (*testout) << "curvature not defined!" << endl;
++ return;
++ }
++ curvature = max(curvature,max(fabs(prop->MinCurvature()),
++ fabs(prop->MaxCurvature())));
++
++ prop->SetParameters (par2.X(), par2.Y());
++ if (!prop->IsCurvatureDefined())
++ {
++ (*testout) << "curvature not defined!" << endl;
++ return;
++ }
++ curvature = max(curvature,max(fabs(prop->MinCurvature()),
++ fabs(prop->MaxCurvature())));
++
++ //(*testout) << "curvature " << curvature << endl;
++
++ if (curvature < 1e-3)
++ {
++ //(*testout) << "curvature too small (" << curvature << ")!" << endl;
++ return;
++ // return war bis 10.2.05 auskommentiert
++ }
++
++
++
++ h = ComputeH (curvature+1e-10);
++
++ if(h < 1e-4*maxside)
++ return;
++
++ // commented to restrict H on a large sphere for example
++ //if (h > 30) return;
++ }
++
++ if (h < maxside && depth < 10)
++ {
++ //cout << "\r h " << h << flush;
++ gp_Pnt2d pm;
++
++ //cout << "h " << h << " maxside " << maxside << " depth " << depth << endl;
++ //cout << "par0 " << par0.X() << " " << par0.Y()
++ //<< " par1 " << par1.X() << " " << par1.Y()
++ // << " par2 " << par2.X() << " " << par2.Y()<< endl;
++
++ if(ls == 0)
++ {
++ pm.SetX(0.5*(par1.X()+par2.X())); pm.SetY(0.5*(par1.Y()+par2.Y()));
++ RestrictHTriangle(pm, par2, par0, prop, mesh, depth+1, h);
++ RestrictHTriangle(pm, par0, par1, prop, mesh, depth+1, h);
++ }
++ else if(ls == 1)
++ {
++ pm.SetX(0.5*(par0.X()+par2.X())); pm.SetY(0.5*(par0.Y()+par2.Y()));
++ RestrictHTriangle(pm, par1, par2, prop, mesh, depth+1, h);
++ RestrictHTriangle(pm, par0, par1, prop, mesh, depth+1, h);
++ }
++ else if(ls == 2)
++ {
++ pm.SetX(0.5*(par0.X()+par1.X())); pm.SetY(0.5*(par0.Y()+par1.Y()));
++ RestrictHTriangle(pm, par1, par2, prop, mesh, depth+1, h);
++ RestrictHTriangle(pm, par2, par0, prop, mesh, depth+1, h);
++ }
++
++ }
++ else
++ {
++ gp_Pnt pnt;
++ Point3d p3d;
++
++ prop->SetParameters (parmid.X(), parmid.Y());
++ pnt = prop->Value();
++ p3d = Point3d(pnt.X(), pnt.Y(), pnt.Z());
++ mesh.RestrictLocalH (p3d, h);
++
++ p3d = Point3d(pnt0.X(), pnt0.Y(), pnt0.Z());
++ mesh.RestrictLocalH (p3d, h);
++
++ p3d = Point3d(pnt1.X(), pnt1.Y(), pnt1.Z());
++ mesh.RestrictLocalH (p3d, h);
++
++ p3d = Point3d(pnt2.X(), pnt2.Y(), pnt2.Z());
++ mesh.RestrictLocalH (p3d, h);
++
++ //(*testout) << "p = " << p3d << ", h = " << h << ", maxside = " << maxside << endl;
++
++ }
++ }
++
++
++
++ void DivideEdge (TopoDS_Edge & edge, Array<MeshPoint> & ps,
++ Array<double> & params, Mesh & mesh)
++ {
++ double s0, s1;
++ double maxh = mparam.maxh;
++ int nsubedges = 1;
++ gp_Pnt pnt, oldpnt;
++ double svalue[DIVIDEEDGESECTIONS];
++
++ GProp_GProps system;
++ BRepGProp::LinearProperties(edge, system);
++ double L = system.Mass();
++
++ Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);
++
++ double hvalue[DIVIDEEDGESECTIONS+1];
++ hvalue[0] = 0;
++ pnt = c->Value(s0);
++
++ //double olddist = 0; -- useless variables
++ //double dist = 0;
++
++ int tmpVal = (int)(DIVIDEEDGESECTIONS);
++
++ for (int i = 1; i <= tmpVal; i++)
++ {
++ oldpnt = pnt;
++ pnt = c->Value(s0+(i/double(DIVIDEEDGESECTIONS))*(s1-s0));
++ // -- no more than 1 segment per <edge length>/DIVIDEEDGESECTIONS
++ hvalue[i] = hvalue[i-1] +
++ // 1.0/mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z()))*
++ // pnt.Distance(oldpnt);
++ min( 1.0,
++ 1.0/mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z()))*
++ pnt.Distance(oldpnt));
++
++ //(*testout) << "mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z())) " << mesh.GetH(Point3d(pnt.X(), pnt.Y(), pnt.Z()))
++ // << " pnt.Distance(oldpnt) " << pnt.Distance(oldpnt) << endl;
++
++ //olddist = dist; -- useless variables
++ //dist = pnt.Distance(oldpnt);
++ }
++
++ // nsubedges = int(ceil(hvalue[DIVIDEEDGESECTIONS]));
++ nsubedges = max (1, int(floor(hvalue[DIVIDEEDGESECTIONS]+0.5)));
++
++ ps.SetSize(nsubedges-1);
++ params.SetSize(nsubedges+1);
++
++ int i = 1;
++ int i1 = 0;
++ do
++ {
++ if (hvalue[i1]/hvalue[DIVIDEEDGESECTIONS]*nsubedges >= i)
++ {
++ // -- for nsubedges comparable to DIVIDEEDGESECTIONS
++ //params[i] = s0+(i1/double(DIVIDEEDGESECTIONS))*(s1-s0);
++ double d1 = i1 - (hvalue[i1] - i*hvalue[DIVIDEEDGESECTIONS]/nsubedges)/(hvalue[i1]-hvalue[i1-1]);
++ params[i] = s0+(d1/double(DIVIDEEDGESECTIONS))*(s1-s0);
++ pnt = c->Value(params[i]);
++ ps[i-1] = MeshPoint (Point3d(pnt.X(), pnt.Y(), pnt.Z()));
++ i++;
++ }
++ i1++;
++ if (i1 > DIVIDEEDGESECTIONS)
++ {
++ nsubedges = i;
++ ps.SetSize(nsubedges-1);
++ params.SetSize(nsubedges+1);
++ cout << "divide edge: local h too small" << endl;
++ }
++ } while (i < nsubedges);
++
++ params[0] = s0;
++ params[nsubedges] = s1;
++
++ if (params[nsubedges] <= params[nsubedges-1])
++ {
++ cout << "CORRECTED" << endl;
++ ps.SetSize (nsubedges-2);
++ params.SetSize (nsubedges);
++ params[nsubedges] = s1;
++ }
++ }
++
++
++
++
++ void OCCFindEdges (OCCGeometry & geom, Mesh & mesh)
++ {
++ const char * savetask = multithread.task;
++ multithread.task = "Edge meshing";
++
++ (*testout) << "edge meshing" << endl;
++
++ int nvertices = geom.vmap.Extent();
++ int nedges = geom.emap.Extent();
++
++ (*testout) << "nvertices = " << nvertices << endl;
++ (*testout) << "nedges = " << nedges << endl;
++
++ double eps = 1e-6 * geom.GetBoundingBox().Diam();
++ const double eps2 = eps * eps; // -- small optimization
++
++ int first_vp = mesh.GetNP()+1; // -- to support SALOME sub-meshes
++
++ for (int i = 1; i <= nvertices; i++)
++ {
++ gp_Pnt pnt = BRep_Tool::Pnt (TopoDS::Vertex(geom.vmap(i)));
++ MeshPoint mp( Point<3>(pnt.X(), pnt.Y(), pnt.Z()) );
++
++ bool exists = 0;
++ if (merge_solids)
++ for (PointIndex pi = 1; pi <= mesh.GetNP(); pi++)
++ //if ( Dist2 (mesh[pi], Point<3>(mp)) < eps*eps)
++ if ( Dist2 (mesh[pi], Point<3>(mp)) < eps2 ) // -- small optimization
++ {
++ exists = 1;
++ break;
++ }
++
++ if (!exists)
++ mesh.AddPoint (mp);
++ }
++
++ (*testout) << "different vertices = " << mesh.GetNP() << endl;
++
++
++ int first_ep = mesh.GetNP()+1;
++
++ Array<int> face2solid[2];
++ for (int i = 0; i<2; i++)
++ {
++ face2solid[i].SetSize (geom.fmap.Extent());
++ face2solid[i] = 0;
++ }
++
++ int solidnr = 0;
++ for (TopExp_Explorer exp0(geom.shape, TopAbs_SOLID); exp0.More(); exp0.Next())
++ {
++ solidnr++;
++ for (TopExp_Explorer exp1(exp0.Current(), TopAbs_FACE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp1.Current());
++ int facenr = geom.fmap.FindIndex(face);
++ if ( facenr < 1 ) continue; // -- to support SALOME sub-meshes
++
++ if (face2solid[0][facenr-1] == 0)
++ face2solid[0][facenr-1] = solidnr;
++ else
++ face2solid[1][facenr-1] = solidnr;
++ }
++ }
++
++
++ int total = 0;
++ for (int i3 = 1; i3 <= geom.fmap.Extent(); i3++)
++ for (TopExp_Explorer exp2(geom.fmap(i3), TopAbs_WIRE); exp2.More(); exp2.Next())
++ for (TopExp_Explorer exp3(exp2.Current(), TopAbs_EDGE); exp3.More(); exp3.Next())
++ total++;
++
++
++ int facenr = 0;
++ int edgenr = 0;
++
++ edgenr = mesh.GetNSeg(); // to support SALOME sub-meshes
++
++ (*testout) << "faces = " << geom.fmap.Extent() << endl;
++ int curr = 0;
++
++ for (int i3 = 1; i3 <= geom.fmap.Extent(); i3++)
++ {
++ TopoDS_Face face = TopoDS::Face(geom.fmap(i3));
++ facenr = geom.fmap.FindIndex (face); // sollte doch immer == i3 sein ??? JS
++
++ int solidnr0 = face2solid[0][i3-1];
++ int solidnr1 = face2solid[1][i3-1];
++
++ /* auskommentiert am 3.3.05 von robert
++ for (exp2.Init (geom.somap(solidnr0), TopAbs_FACE); exp2.More(); exp2.Next())
++ {
++ TopoDS_Face face2 = TopoDS::Face(exp2.Current());
++ if (geom.fmap.FindIndex(face2) == facenr)
++ {
++ // if (face.Orientation() != face2.Orientation()) swap (solidnr0, solidnr1);
++ }
++ }
++ */
++
++ mesh.AddFaceDescriptor (FaceDescriptor(facenr, solidnr0, solidnr1, 0));
++
++ // Philippose - 06/07/2009
++ // Add the face colour to the mesh data
++ Quantity_Color face_colour;
++
++ if(!(geom.face_colours.IsNull())
++ && (geom.face_colours->GetColor(face,XCAFDoc_ColorSurf,face_colour)))
++ {
++ mesh.GetFaceDescriptor(facenr).SetSurfColour(Vec3d(face_colour.Red(),face_colour.Green(),face_colour.Blue()));
++ }
++ else
++ {
++ mesh.GetFaceDescriptor(facenr).SetSurfColour(Vec3d(0.0,1.0,0.0));
++ }
++ // ACHTUNG! STIMMT NICHT ALLGEMEIN (RG)
++
++
++ Handle(Geom_Surface) occface = BRep_Tool::Surface(face);
++
++ for (TopExp_Explorer exp2 (face, TopAbs_WIRE); exp2.More(); exp2.Next())
++ {
++ TopoDS_Shape wire = exp2.Current();
++
++ for (TopExp_Explorer exp3 (wire, TopAbs_EDGE); exp3.More(); exp3.Next())
++ {
++ curr++;
++ (*testout) << "edge nr " << curr << endl;
++
++ multithread.percent = 100 * curr / double (total);
++ if (multithread.terminate) return;
++
++ TopoDS_Edge edge = TopoDS::Edge (exp3.Current());
++ if (BRep_Tool::Degenerated(edge))
++ {
++ //(*testout) << "ignoring degenerated edge" << endl;
++ continue;
++ }
++ if ( geom.emap.FindIndex(edge) < 1 ) continue; // to support SALOME sub-meshes
++
++ if (geom.vmap.FindIndex(TopExp::FirstVertex (edge)) ==
++ geom.vmap.FindIndex(TopExp::LastVertex (edge)))
++ {
++ GProp_GProps system;
++ BRepGProp::LinearProperties(edge, system);
++
++ if (system.Mass() < eps)
++ {
++ cout << "ignoring edge " << geom.emap.FindIndex (edge)
++ << ". closed edge with length < " << eps << endl;
++ continue;
++ }
++ }
++
++
++ Handle(Geom2d_Curve) cof;
++ double s0, s1;
++ cof = BRep_Tool::CurveOnSurface (edge, face, s0, s1);
++
++ int geomedgenr = geom.emap.FindIndex(edge);
++
++ Array <MeshPoint> mp;
++ Array <double> params;
++
++ DivideEdge (edge, mp, params, mesh);
++
++ Array <int> pnums;
++ pnums.SetSize (mp.Size()+2);
++
++ if (!merge_solids)
++ {
++ //pnums[0] = geom.vmap.FindIndex (TopExp::FirstVertex (edge));
++ //pnums[pnums.Size()-1] = geom.vmap.FindIndex (TopExp::LastVertex (edge));
++ MeshPoint dfltP ( Point<3> ( 0, 0, 0 ) );
++ int *ipp[] = { &pnums[0], &pnums[pnums.Size()-1] };
++ TopoDS_Iterator vIt( edge, false );
++ TopoDS_Vertex v[2];
++ v[0] = TopoDS::Vertex( vIt.Value() ); vIt.Next();
++ v[1] = TopoDS::Vertex( vIt.Value() );
++ if ( v[0].Orientation() == TopAbs_REVERSED )
++ std::swap( v[0], v[1] );
++ for ( int i = 0; i < 2; ++i)
++ {
++ int &ip = *ipp[i];
++ ip = geom.vmap.FindIndex ( v[i] );
++ if ( ip == 0 || ip > nvertices )
++ {
++ int iv = ip;
++ if ( ip == 0 )
++ ip = iv = geom.vmap.Add( v[i] );
++ gp_Pnt pnt = BRep_Tool::Pnt( v[i] );
++ MeshPoint mp( Point<3>(pnt.X(), pnt.Y(), pnt.Z()) );
++ for (PointIndex pi = 1; pi < first_vp; pi++)
++ if ( Dist2 (mesh.Point(pi), Point<3>(mp)) < 1e-100 )
++ {
++ ip = pi;
++ if ( mesh.Point(ip).GetLayer() != dfltP.GetLayer() && mesh.Point(ip).GetLayer() != iv )
++ continue;
++ if ( mesh.Point(ip).GetLayer() == dfltP.GetLayer())
++ mesh.Point(ip) = MeshPoint( mesh.Point(ip), iv );
++ break;
++ }
++ }
++ else
++ {
++ ip += first_vp - 1;
++ }
++ }
++ }
++ else
++ {
++ TopoDS_Iterator vIt( edge, false );
++ TopoDS_Vertex v1 = TopoDS::Vertex( vIt.Value() ); vIt.Next();
++ TopoDS_Vertex v2 = TopoDS::Vertex( vIt.Value() );
++ if ( v1.Orientation() == TopAbs_REVERSED )
++ std::swap( v1, v2 );
++ const bool isClosedEdge = v1.IsSame( v2 );
++
++ Point<3> fp = occ2ng (BRep_Tool::Pnt (v1));
++ Point<3> lp = occ2ng (BRep_Tool::Pnt (v2));
++ double tol2 = std::min( eps*eps, 1e-6 * Dist2( fp, lp ));
++ if ( isClosedEdge )
++ tol2 = BRep_Tool::Tolerance( v1 ) * BRep_Tool::Tolerance( v1 );
++
++ pnums[0] = -1;
++ pnums.Last() = -1;
++ for (PointIndex pi = 1; pi < first_ep; pi++)
++ {
++ if (Dist2 (mesh[pi], fp) < tol2) pnums[0] = pi;
++ if (Dist2 (mesh[pi], lp) < tol2) pnums.Last() = pi;
++ }
++ if (( isClosedEdge && pnums[0] != pnums.Last() ) ||
++ ( !isClosedEdge && pnums[0] == pnums.Last() ))
++ pnums[0] = pnums.Last() = -1;
++ if ( pnums[0] == -1 || pnums.Last() == -1 )
++ {
++ // take into account a possible large gap between a vertex and an edge curve
++ // end and a large vertex tolerance covering the whole edge
++ if ( pnums[0] == -1 )
++ {
++ double tol = BRep_Tool::Tolerance( v1 );
++ for (PointIndex pi = 1; pi < first_ep; pi++)
++ if (pi != pnums.Last() && Dist2 (mesh[pi], fp) < 2*tol*tol)
++ pnums[0] = pi;
++
++ if ( pnums[0] == -1 )
++ pnums[0] = first_ep-1- nvertices + geom.vmap.FindIndex ( v1 );
++ }
++ if ( isClosedEdge )
++ {
++ pnums.Last() = pnums[0];
++ }
++ else
++ {
++ if ( pnums.Last() == -1 )
++ {
++ double tol = BRep_Tool::Tolerance( v2 );
++ for (PointIndex pi = 1; pi < first_ep; pi++)
++ if (pi != pnums[0] && Dist2 (mesh[pi], lp) < 2*tol*tol)
++ pnums.Last() = pi;
++
++ if ( pnums.Last() == -1 )
++ pnums.Last() = first_ep-1-nvertices + geom.vmap.FindIndex ( v2 );
++ }
++
++ if ( Dist2( fp, mesh[PointIndex(pnums[0])]) >
++ Dist2( lp, mesh[PointIndex(pnums.Last())]))
++ std::swap( pnums[0], pnums.Last() );
++ }
++ }
++ }
++
++
++ for (int i = 1; i <= mp.Size(); i++)
++ {
++ bool exists = 0;
++ int j;
++ for (j = first_ep; j <= mesh.GetNP(); j++)
++ {
++ if (!merge_solids && mesh.Point(j).GetLayer() != geomedgenr ) continue; // to support SALOME fuse edges
++ if ((mesh.Point(j)-Point<3>(mp[i-1])).Length() < eps)
++ {
++ exists = 1;
++ break;
++ }
++ }
++
++ if (exists)
++ pnums[i] = j;
++ else
++ {
++ mesh.AddPoint (mp[i-1], geomedgenr); // to support SALOME fuse edges
++ (*testout) << "add meshpoint " << mp[i-1] << endl;
++ pnums[i] = mesh.GetNP();
++ }
++ }
++ (*testout) << "NP = " << mesh.GetNP() << endl;
++
++ //(*testout) << pnums[pnums.Size()-1] << endl;
++
++ for (int i = 1; i <= mp.Size()+1; i++)
++ {
++ edgenr++;
++ Segment seg;
++
++ seg[0] = pnums[i-1];
++ seg[1] = pnums[i];
++ seg.edgenr = edgenr;
++ seg.si = facenr;
++ seg.epgeominfo[0].dist = params[i-1];
++ seg.epgeominfo[1].dist = params[i];
++ seg.epgeominfo[0].edgenr = geomedgenr;
++ seg.epgeominfo[1].edgenr = geomedgenr;
++
++ gp_Pnt2d p2d;
++ p2d = cof->Value(params[i-1]);
++ // if (i == 1) p2d = cof->Value(s0);
++ seg.epgeominfo[0].u = p2d.X();
++ seg.epgeominfo[0].v = p2d.Y();
++ p2d = cof->Value(params[i]);
++ // if (i == mp.Size()+1) p2d = cof -> Value(s1);
++ seg.epgeominfo[1].u = p2d.X();
++ seg.epgeominfo[1].v = p2d.Y();
++
++ /*
++ if (occface->IsUPeriodic())
++ {
++ cout << "U Periodic" << endl;
++ if (fabs(seg.epgeominfo[1].u-seg.epgeominfo[0].u) >
++ fabs(seg.epgeominfo[1].u-
++ (seg.epgeominfo[0].u-occface->UPeriod())))
++ seg.epgeominfo[0].u = p2d.X()+occface->UPeriod();
++
++ if (fabs(seg.epgeominfo[1].u-seg.epgeominfo[0].u) >
++ fabs(seg.epgeominfo[1].u-
++ (seg.epgeominfo[0].u+occface->UPeriod())))
++ seg.epgeominfo[0].u = p2d.X()-occface->UPeriod();
++ }
++
++ if (occface->IsVPeriodic())
++ {
++ cout << "V Periodic" << endl;
++ if (fabs(seg.epgeominfo[1].v-seg.epgeominfo[0].v) >
++ fabs(seg.epgeominfo[1].v-
++ (seg.epgeominfo[0].v-occface->VPeriod())))
++ seg.epgeominfo[0].v = p2d.Y()+occface->VPeriod();
++
++ if (fabs(seg.epgeominfo[1].v-seg.epgeominfo[0].v) >
++ fabs(seg.epgeominfo[1].v-
++ (seg.epgeominfo[0].v+occface->VPeriod())))
++ seg.epgeominfo[0].v = p2d.Y()-occface->VPeriod();
++ }
++ */
++
++ if (edge.Orientation() == TopAbs_REVERSED)
++ {
++ swap (seg[0], seg[1]);
++ swap (seg.epgeominfo[0].dist, seg.epgeominfo[1].dist);
++ swap (seg.epgeominfo[0].u, seg.epgeominfo[1].u);
++ swap (seg.epgeominfo[0].v, seg.epgeominfo[1].v);
++ }
++
++ mesh.AddSegment (seg);
++
++ //edgesegments[geomedgenr-1]->Append(mesh.GetNSeg());
++
++ }
++ }
++ }
++ }
++
++ // for(i=1; i<=mesh.GetNSeg(); i++)
++ // (*testout) << "edge " << mesh.LineSegment(i).edgenr << " face " << mesh.LineSegment(i).si
++ // << " p1 " << mesh.LineSegment(i)[0] << " p2 " << mesh.LineSegment(i)[1] << endl;
++ // exit(10);
++ for (int j = 1; j <= mesh.GetNP(); j++) // to support SALOME fuse edges: set level to zero
++ mesh.Point(j) = MeshPoint( (Point<3>&) mesh.Point(j) );
++
++ mesh.CalcSurfacesOfNode();
++ multithread.task = savetask;
++ }
++
++
++
++
++ void OCCMeshSurface (OCCGeometry & geom, Mesh & mesh, int perfstepsend)
++ {
++ int i, j, k;
++ int changed;
++
++ const char * savetask = multithread.task;
++ multithread.task = "Surface meshing";
++
++ geom.facemeshstatus = 0;
++
++ int noldp = mesh.GetNP();
++
++ double starttime = GetTime();
++
++ Array<int> glob2loc(noldp);
++
++ //int projecttype = PARAMETERSPACE;
++
++ int projecttype = PARAMETERSPACE;
++
++ int notrys = 1;
++
++ int surfmesherror = 0;
++
++ for (k = 1; k <= mesh.GetNFD(); k++)
++ {
++ if(1==0 && !geom.fvispar[k-1].IsDrawable())
++ {
++ (*testout) << "ignoring face " << k << endl;
++ cout << "ignoring face " << k << endl;
++ continue;
++ }
++
++ (*testout) << "mesh face " << k << endl;
++ multithread.percent = 100 * k / (mesh.GetNFD() + VSMALL);
++ geom.facemeshstatus[k-1] = -1;
++
++
++ /*
++ if (k != 42)
++ {
++ cout << "skipped" << endl;
++ continue;
++ }
++ */
++
++
++ FaceDescriptor & fd = mesh.GetFaceDescriptor(k);
++
++ int oldnf = mesh.GetNSE();
++
++ Box<3> bb = geom.GetBoundingBox();
++
++ // int projecttype = PLANESPACE;
++
++ Meshing2OCCSurfaces meshing(TopoDS::Face(geom.fmap(k)), bb, projecttype);
++
++ if (meshing.GetProjectionType() == PLANESPACE)
++ PrintMessage (2, "Face ", k, " / ", mesh.GetNFD(), " (plane space projection)");
++ else
++ PrintMessage (2, "Face ", k, " / ", mesh.GetNFD(), " (parameter space projection)");
++
++ if (surfmesherror)
++ cout << "Surface meshing error occured before (in " << surfmesherror << " faces)" << endl;
++
++ // Meshing2OCCSurfaces meshing(f2, bb);
++ meshing.SetStartTime (starttime);
++
++ //(*testout) << "Face " << k << endl << endl;
++
++
++ if (meshing.GetProjectionType() == PLANESPACE)
++ {
++ int cntp = 0;
++ glob2loc = 0;
++ for (i = 1; i <= mesh.GetNSeg(); i++)
++ {
++ Segment & seg = mesh.LineSegment(i);
++ if (seg.si == k)
++ {
++ for (j = 1; j <= 2; j++)
++ {
++ int pi = (j == 1) ? seg[0] : seg[1];
++ if (!glob2loc.Get(pi))
++ {
++ meshing.AddPoint (mesh.Point(pi), pi);
++ cntp++;
++ glob2loc.Elem(pi) = cntp;
++ }
++ }
++ }
++ }
++
++ for (i = 1; i <= mesh.GetNSeg(); i++)
++ {
++ Segment & seg = mesh.LineSegment(i);
++ if (seg.si == k)
++ {
++ PointGeomInfo gi0, gi1;
++ gi0.trignum = gi1.trignum = k;
++ gi0.u = seg.epgeominfo[0].u;
++ gi0.v = seg.epgeominfo[0].v;
++ gi1.u = seg.epgeominfo[1].u;
++ gi1.v = seg.epgeominfo[1].v;
++
++ meshing.AddBoundaryElement (glob2loc.Get(seg[0]), glob2loc.Get(seg[1]), gi0, gi1);
++ //(*testout) << gi0.u << " " << gi0.v << endl;
++ //(*testout) << gi1.u << " " << gi1.v << endl;
++ }
++ }
++ }
++ else
++ {
++ int cntp = 0;
++
++ for (i = 1; i <= mesh.GetNSeg(); i++)
++ if (mesh.LineSegment(i).si == k)
++ cntp+=2;
++
++
++ Array< PointGeomInfo > gis;
++
++ gis.SetAllocSize (cntp);
++ gis.SetSize (0);
++
++ for (i = 1; i <= mesh.GetNSeg(); i++)
++ {
++ Segment & seg = mesh.LineSegment(i);
++ if (seg.si == k)
++ {
++ PointGeomInfo gi0, gi1;
++ gi0.trignum = gi1.trignum = k;
++ gi0.u = seg.epgeominfo[0].u;
++ gi0.v = seg.epgeominfo[0].v;
++ gi1.u = seg.epgeominfo[1].u;
++ gi1.v = seg.epgeominfo[1].v;
++
++ int locpnum[2] = {0, 0};
++
++ for (j = 0; j < 2; j++)
++ {
++ PointGeomInfo gi = (j == 0) ? gi0 : gi1;
++
++ int l;
++ for (l = 0; l < gis.Size() && locpnum[j] == 0; l++)
++ {
++ double dist = sqr (gis[l].u-gi.u)+sqr(gis[l].v-gi.v);
++
++ if (dist < 1e-10)
++ locpnum[j] = l+1;
++ }
++
++ if (locpnum[j] == 0)
++ {
++ int pi = (j == 0) ? seg[0] : seg[1];
++ meshing.AddPoint (mesh.Point(pi), pi);
++
++ gis.SetSize (gis.Size()+1);
++ gis[l] = gi;
++ locpnum[j] = l+1;
++ }
++ }
++
++ meshing.AddBoundaryElement (locpnum[0], locpnum[1], gi0, gi1);
++ //(*testout) << gi0.u << " " << gi0.v << endl;
++ //(*testout) << gi1.u << " " << gi1.v << endl;
++
++ }
++ }
++ }
++
++
++
++
++
++ // Philippose - 15/01/2009
++ double maxh = geom.face_maxh[k-1];
++ //double maxh = mparam.maxh;
++ mparam.checkoverlap = 0;
++ // int noldpoints = mesh->GetNP();
++ int noldsurfel = mesh.GetNSE();
++
++ GProp_GProps sprops;
++ BRepGProp::SurfaceProperties(TopoDS::Face(geom.fmap(k)),sprops);
++ meshing.SetMaxArea(2.*sprops.Mass());
++
++ MESHING2_RESULT res;
++
++ try {
++ res = meshing.GenerateMesh (mesh, mparam, maxh, k);
++ }
++
++ catch (SingularMatrixException)
++ {
++ (*myerr) << "Singular Matrix" << endl;
++ res = MESHING2_GIVEUP;
++ }
++
++ catch (UVBoundsException)
++ {
++ (*myerr) << "UV bounds exceeded" << endl;
++ res = MESHING2_GIVEUP;
++ }
++
++ projecttype = PARAMETERSPACE;
++
++ if (res != MESHING2_OK)
++ {
++ if (notrys == 1)
++ {
++ for (int i = noldsurfel+1; i <= mesh.GetNSE(); i++)
++ mesh.DeleteSurfaceElement (i);
++
++ mesh.Compress();
++
++ cout << "retry Surface " << k << endl;
++
++ k--;
++ projecttype*=-1;
++ notrys++;
++ continue;
++ }
++ else
++ {
++ geom.facemeshstatus[k-1] = -1;
++ PrintError ("Problem in Surface mesh generation");
++ surfmesherror++;
++ // throw NgException ("Problem in Surface mesh generation");
++ }
++ }
++ else
++ {
++ geom.facemeshstatus[k-1] = 1;
++ }
++
++ notrys = 1;
++
++ for (i = oldnf+1; i <= mesh.GetNSE(); i++)
++ mesh.SurfaceElement(i).SetIndex (k);
++
++ }
++
++// ofstream problemfile("occmesh.rep");
++
++// problemfile << "SURFACEMESHING" << endl << endl;
++
++ if (surfmesherror)
++ {
++ cout << "WARNING! NOT ALL FACES HAVE BEEN MESHED" << endl;
++ cout << "SURFACE MESHING ERROR OCCURED IN " << surfmesherror << " FACES:" << endl;
++ for (int i = 1; i <= geom.fmap.Extent(); i++)
++ if (geom.facemeshstatus[i-1] == -1)
++ {
++ cout << "Face " << i << endl;
++// problemfile << "problem with face " << i << endl;
++// problemfile << "vertices: " << endl;
++ TopExp_Explorer exp0,exp1,exp2;
++ for ( exp0.Init(TopoDS::Face (geom.fmap(i)), TopAbs_WIRE); exp0.More(); exp0.Next() )
++ {
++ TopoDS_Wire wire = TopoDS::Wire(exp0.Current());
++ for ( exp1.Init(wire,TopAbs_EDGE); exp1.More(); exp1.Next() )
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ for ( exp2.Init(edge,TopAbs_VERTEX); exp2.More(); exp2.Next() )
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp2.Current());
++ gp_Pnt point = BRep_Tool::Pnt(vertex);
++// problemfile << point.X() << " " << point.Y() << " " << point.Z() << endl;
++ }
++ }
++ }
++// problemfile << endl;
++
++ }
++ cout << endl << endl;
++ cout << "for more information open IGES/STEP Topology Explorer" << endl;
++// problemfile.close();
++ throw NgException ("Problem in Surface mesh generation");
++ }
++ else
++ {
++// problemfile << "OK" << endl << endl;
++// problemfile.close();
++ }
++
++
++
++
++ if (multithread.terminate || perfstepsend < MESHCONST_OPTSURFACE)
++ return;
++
++ multithread.task = "Optimizing surface";
++
++ static int timer_opt2d = NgProfiler::CreateTimer ("Optimization 2D");
++ NgProfiler::StartTimer (timer_opt2d);
++
++ for (k = 1; k <= mesh.GetNFD(); k++)
++ {
++ // if (k != 42) continue;
++ // if (k != 36) continue;
++
++ // (*testout) << "optimize face " << k << endl;
++ multithread.percent = 100 * k / (mesh.GetNFD() + VSMALL);
++
++ FaceDescriptor & fd = mesh.GetFaceDescriptor(k);
++
++ PrintMessage (1, "Optimize Surface ", k);
++ for (i = 1; i <= mparam.optsteps2d; i++)
++ {
++ // (*testout) << "optstep " << i << endl;
++ if (multithread.terminate) return;
++
++ {
++ MeshOptimize2dOCCSurfaces meshopt(geom);
++ meshopt.SetFaceIndex (k);
++ meshopt.SetImproveEdges (0);
++ meshopt.SetMetricWeight (mparam.elsizeweight);
++ //meshopt.SetMetricWeight (0.2);
++ meshopt.SetWriteStatus (0);
++
++ // (*testout) << "EdgeSwapping (mesh, (i > mparam.optsteps2d/2))" << endl;
++ meshopt.EdgeSwapping (mesh, (i > mparam.optsteps2d/2));
++ }
++
++ if (multithread.terminate) return;
++ {
++ MeshOptimize2dOCCSurfaces meshopt(geom);
++ meshopt.SetFaceIndex (k);
++ meshopt.SetImproveEdges (0);
++ //meshopt.SetMetricWeight (0.2);
++ meshopt.SetMetricWeight (mparam.elsizeweight);
++ meshopt.SetWriteStatus (0);
++
++ // (*testout) << "ImproveMesh (mesh)" << endl;
++ meshopt.ImproveMesh (mesh, mparam);
++ }
++
++ {
++ MeshOptimize2dOCCSurfaces meshopt(geom);
++ meshopt.SetFaceIndex (k);
++ meshopt.SetImproveEdges (0);
++ //meshopt.SetMetricWeight (0.2);
++ meshopt.SetMetricWeight (mparam.elsizeweight);
++ meshopt.SetWriteStatus (0);
++
++ // (*testout) << "CombineImprove (mesh)" << endl;
++ meshopt.CombineImprove (mesh);
++ }
++
++ if (multithread.terminate) return;
++ {
++ MeshOptimize2dOCCSurfaces meshopt(geom);
++ meshopt.SetFaceIndex (k);
++ meshopt.SetImproveEdges (0);
++ //meshopt.SetMetricWeight (0.2);
++ meshopt.SetMetricWeight (mparam.elsizeweight);
++ meshopt.SetWriteStatus (0);
++
++ // (*testout) << "ImproveMesh (mesh)" << endl;
++ meshopt.ImproveMesh (mesh, mparam);
++ }
++ }
++
++ }
++
++
++ mesh.CalcSurfacesOfNode();
++ mesh.Compress();
++
++ NgProfiler::StopTimer (timer_opt2d);
++
++ multithread.task = savetask;
++ }
++
++
++
++ void OCCSetLocalMeshSize(OCCGeometry & geom, Mesh & mesh)
++ {
++ mesh.SetGlobalH (mparam.maxh);
++ mesh.SetMinimalH (mparam.minh);
++
++ Array<double> maxhdom;
++ maxhdom.SetSize (geom.NrSolids());
++ maxhdom = mparam.maxh;
++
++ mesh.SetMaxHDomain (maxhdom);
++
++ Box<3> bb = geom.GetBoundingBox();
++ bb.Increase (bb.Diam()/10);
++
++ mesh.SetLocalH (bb.PMin(), bb.PMax(), 0.5);
++
++ if (mparam.uselocalh)
++ {
++ const char * savetask = multithread.task;
++ multithread.percent = 0;
++
++ mesh.SetLocalH (bb.PMin(), bb.PMax(), mparam.grading);
++
++ int nedges = geom.emap.Extent();
++
++ double mincurvelength = IGNORECURVELENGTH;
++ double maxedgelen = 0;
++ double minedgelen = 1e99;
++
++ if(occparam.resthminedgelenenable)
++ {
++ mincurvelength = occparam.resthminedgelen;
++ if(mincurvelength < IGNORECURVELENGTH) mincurvelength = IGNORECURVELENGTH;
++ }
++
++ multithread.task = "Setting local mesh size (elements per edge)";
++
++ // setting elements per edge
++
++ for (int i = 1; i <= nedges && !multithread.terminate; i++)
++ {
++ TopoDS_Edge e = TopoDS::Edge (geom.emap(i));
++ multithread.percent = 100 * (i-1)/double(nedges);
++ if (BRep_Tool::Degenerated(e)) continue;
++
++ GProp_GProps system;
++ BRepGProp::LinearProperties(e, system);
++ double len = system.Mass();
++
++ if (len < mincurvelength)
++ {
++ (*testout) << "ignored" << endl;
++ continue;
++ }
++
++ double localh = len/mparam.segmentsperedge;
++ double s0, s1;
++
++ // Philippose - 23/01/2009
++ // Find all the parent faces of a given edge
++ // and limit the mesh size of the edge based on the
++ // mesh size limit of the face
++ TopTools_IndexedDataMapOfShapeListOfShape edge_face_map;
++ edge_face_map.Clear();
++
++ TopExp::MapShapesAndAncestors(geom.shape, TopAbs_EDGE, TopAbs_FACE, edge_face_map);
++ const TopTools_ListOfShape& parent_faces = edge_face_map.FindFromKey(e);
++
++ TopTools_ListIteratorOfListOfShape parent_face_list;
++
++ for(parent_face_list.Initialize(parent_faces); parent_face_list.More(); parent_face_list.Next())
++ {
++ TopoDS_Face parent_face = TopoDS::Face(parent_face_list.Value());
++
++ int face_index = geom.fmap.FindIndex(parent_face);
++
++ if(face_index >= 1) localh = min(localh,geom.face_maxh[face_index - 1]);
++ }
++
++ Handle(Geom_Curve) c = BRep_Tool::Curve(e, s0, s1);
++
++ maxedgelen = max (maxedgelen, len);
++ minedgelen = min (minedgelen, len);
++
++ // Philippose - 23/01/2009
++ // Modified the calculation of maxj, because the
++ // method used so far always results in maxj = 2,
++ // which causes the localh to be set only at the
++ // starting, mid and end of the edge.
++ // Old Algorithm:
++ // int maxj = 2 * (int) ceil (localh/len);
++ int maxj = max((int) ceil(len/localh), 2);
++
++ for (int j = 0; j <= maxj; j++)
++ {
++ gp_Pnt pnt = c->Value (s0+double(j)/maxj*(s1-s0));
++ mesh.RestrictLocalH (Point3d(pnt.X(), pnt.Y(), pnt.Z()), localh);
++ }
++ }
++
++ multithread.task = "Setting local mesh size (edge curvature)";
++
++ // setting edge curvature
++
++ int nsections = 20;
++
++ for (int i = 1; i <= nedges && !multithread.terminate; i++)
++ {
++ double maxcur = 0;
++ multithread.percent = 100 * (i-1)/double(nedges);
++ TopoDS_Edge edge = TopoDS::Edge (geom.emap(i));
++ if (BRep_Tool::Degenerated(edge)) continue;
++ double s0, s1;
++ Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);
++ BRepAdaptor_Curve brepc(edge);
++ BRepLProp_CLProps prop(brepc, 2, 1e-5);
++
++ for (int j = 1; j <= nsections; j++)
++ {
++ double s = s0 + j/(double) nsections * (s1-s0);
++ prop.SetParameter (s);
++ double curvature = prop.Curvature();
++ if(curvature> maxcur) maxcur = curvature;
++
++ if (curvature >= 1e99)
++ continue;
++
++ gp_Pnt pnt = c->Value (s);
++
++ mesh.RestrictLocalH (Point3d(pnt.X(), pnt.Y(), pnt.Z()), ComputeH (fabs(curvature)));
++ }
++ // (*testout) << "edge " << i << " max. curvature: " << maxcur << endl;
++ }
++
++ multithread.task = "Setting local mesh size (face curvature)";
++
++ // setting face curvature
++
++ int nfaces = geom.fmap.Extent();
++
++ for (int i = 1; i <= nfaces && !multithread.terminate; i++)
++ {
++ multithread.percent = 100 * (i-1)/double(nfaces);
++ TopoDS_Face face = TopoDS::Face(geom.fmap(i));
++ TopLoc_Location loc;
++ Handle(Geom_Surface) surf = BRep_Tool::Surface (face);
++ Handle(Poly_Triangulation) triangulation = BRep_Tool::Triangulation (face, loc);
++
++ if (triangulation.IsNull()) continue;
++
++ BRepAdaptor_Surface sf(face, Standard_True);
++ BRepLProp_SLProps prop(sf, 2, 1e-5);
++
++ int ntriangles = triangulation -> NbTriangles();
++ for (int j = 1; j <= ntriangles; j++)
++ {
++ gp_Pnt p[3];
++ gp_Pnt2d par[3];
++
++ for (int k = 1; k <=3; k++)
++ {
++ int n = triangulation->Triangles()(j)(k);
++ p[k-1] = triangulation->Nodes()(n).Transformed(loc);
++ par[k-1] = triangulation->UVNodes()(n);
++ }
++
++ //double maxside = 0;
++ //maxside = max (maxside, p[0].Distance(p[1]));
++ //maxside = max (maxside, p[0].Distance(p[2]));
++ //maxside = max (maxside, p[1].Distance(p[2]));
++ //cout << "\rFace " << i << " pos11 ntriangles " << ntriangles << " maxside " << maxside << flush;
++
++ RestrictHTriangle (par[0], par[1], par[2], &prop, mesh, 0);
++ //cout << "\rFace " << i << " pos12 ntriangles " << ntriangles << flush;
++ }
++ }
++
++ // setting close edges
++
++ if (occparam.resthcloseedgeenable)
++ {
++ multithread.task = "Setting local mesh size (close edges)";
++
++ int sections = 100;
++
++ Array<Line> lines(sections*nedges);
++
++ Box3dTree* searchtree =
++ new Box3dTree (bb.PMin(), bb.PMax());
++
++ int nlines = 0;
++ for (int i = 1; i <= nedges && !multithread.terminate; i++)
++ {
++ TopoDS_Edge edge = TopoDS::Edge (geom.emap(i));
++ if (BRep_Tool::Degenerated(edge)) continue;
++
++ double s0, s1;
++ Handle(Geom_Curve) c = BRep_Tool::Curve(edge, s0, s1);
++ BRepAdaptor_Curve brepc(edge);
++ BRepLProp_CLProps prop(brepc, 1, 1e-5);
++ prop.SetParameter (s0);
++
++ gp_Vec d0 = prop.D1().Normalized();
++ double s_start = s0;
++ int count = 0;
++ for (int j = 1; j <= sections; j++)
++ {
++ double s = s0 + (s1-s0)*(double)j/(double)sections;
++ prop.SetParameter (s);
++ gp_Vec d1 = prop.D1().Normalized();
++ double cosalpha = fabs(d0*d1);
++ if ((j == sections) || (cosalpha < cos(10.0/180.0*M_PI)))
++ {
++ count++;
++ gp_Pnt p0 = c->Value (s_start);
++ gp_Pnt p1 = c->Value (s);
++ lines[nlines].p0 = Point<3> (p0.X(), p0.Y(), p0.Z());
++ lines[nlines].p1 = Point<3> (p1.X(), p1.Y(), p1.Z());
++
++ Box3d box;
++ box.SetPoint (Point3d(lines[nlines].p0));
++ box.AddPoint (Point3d(lines[nlines].p1));
++
++ searchtree->Insert (box.PMin(), box.PMax(), nlines+1);
++ nlines++;
++
++ s_start = s;
++ d0 = d1;
++ }
++ }
++ }
++
++ Array<int> linenums;
++
++ for (int i = 0; i < nlines; i++)
++ {
++ multithread.percent = (100*i)/double(nlines);
++ Line & line = lines[i];
++
++ Box3d box;
++ box.SetPoint (Point3d(line.p0));
++ box.AddPoint (Point3d(line.p1));
++ double maxhline = max (mesh.GetH(box.PMin()),
++ mesh.GetH(box.PMax()));
++ box.Increase(maxhline);
++
++ double mindist = 1e99;
++ linenums.SetSize(0);
++ searchtree->GetIntersecting(box.PMin(),box.PMax(),linenums);
++
++ for (int j = 0; j < linenums.Size(); j++)
++ {
++ int num = linenums[j]-1;
++ if (i == num) continue;
++ if ((line.p0-lines[num].p0).Length2() < 1e-15) continue;
++ if ((line.p0-lines[num].p1).Length2() < 1e-15) continue;
++ if ((line.p1-lines[num].p0).Length2() < 1e-15) continue;
++ if ((line.p1-lines[num].p1).Length2() < 1e-15) continue;
++ mindist = min (mindist, line.Dist(lines[num]));
++ }
++
++ mindist /= (occparam.resthcloseedgefac + VSMALL);
++
++ if (mindist < 1e-3)
++ {
++ (*testout) << "extremely small local h: " << mindist
++ << " --> setting to 1e-3" << endl;
++ (*testout) << "somewhere near " << line.p0 << " - " << line.p1 << endl;
++ mindist = 1e-3;
++ }
++
++ mesh.RestrictLocalHLine(line.p0, line.p1, mindist);
++ }
++ }
++
++ multithread.task = savetask;
++
++ }
++
++ // Philippose - 09/03/2009
++ // Added the capability to load the mesh size from a
++ // file also for OpenCascade Geometry
++ // Note:
++ // ** If the "uselocalh" option is ticked in
++ // the "mesh options...insider" menu, the mesh
++ // size will be further modified by the topology
++ // analysis routines.
++ // ** To use the mesh size file as the sole source
++ // for defining the mesh size, uncheck the "uselocalh"
++ // option.
++ mesh.LoadLocalMeshSize (mparam.meshsizefilename);
++ }
++
++
++
++ int OCCGenerateMesh (OCCGeometry & geom, Mesh *& mesh, MeshingParameters & mparam,
++ int perfstepsstart, int perfstepsend)
++ {
++ multithread.percent = 0;
++
++ if (perfstepsstart <= MESHCONST_ANALYSE)
++ {
++ delete mesh;
++ mesh = new Mesh();
++ mesh->geomtype = Mesh::GEOM_OCC;
++
++ OCCSetLocalMeshSize(geom,*mesh);
++ }
++
++ if (multithread.terminate || perfstepsend <= MESHCONST_ANALYSE)
++ return TCL_OK;
++
++ if (perfstepsstart <= MESHCONST_MESHEDGES)
++ {
++ OCCFindEdges (geom, *mesh);
++
++ /*
++ cout << "Removing redundant points" << endl;
++
++ int i, j;
++ int np = mesh->GetNP();
++ Array<int> equalto;
++
++ equalto.SetSize (np);
++ equalto = 0;
++
++ for (i = 1; i <= np; i++)
++ {
++ for (j = i+1; j <= np; j++)
++ {
++ if (!equalto[j-1] && (Dist2 (mesh->Point(i), mesh->Point(j)) < 1e-12))
++ equalto[j-1] = i;
++ }
++ }
++
++ for (i = 1; i <= np; i++)
++ if (equalto[i-1])
++ {
++ cout << "Point " << i << " is equal to Point " << equalto[i-1] << endl;
++ for (j = 1; j <= mesh->GetNSeg(); j++)
++ {
++ Segment & seg = mesh->LineSegment(j);
++ if (seg[0] == i) seg[0] = equalto[i-1];
++ if (seg[1] == i) seg[1] = equalto[i-1];
++ }
++ }
++
++ cout << "Removing degenerated segments" << endl;
++ for (j = 1; j <= mesh->GetNSeg(); j++)
++ {
++ Segment & seg = mesh->LineSegment(j);
++ if (seg[0] == seg[1])
++ {
++ mesh->DeleteSegment(j);
++ cout << "Deleting Segment " << j << endl;
++ }
++ }
++
++ mesh->Compress();
++ */
++
++ /*
++ for (int i = 1; i <= geom.fmap.Extent(); i++)
++ {
++ Handle(Geom_Surface) hf1 =
++ BRep_Tool::Surface(TopoDS::Face(geom.fmap(i)));
++ for (int j = i+1; j <= geom.fmap.Extent(); j++)
++ {
++ Handle(Geom_Surface) hf2 =
++ BRep_Tool::Surface(TopoDS::Face(geom.fmap(j)));
++ if (hf1 == hf2) cout << "face " << i << " and face " << j << " lie on same surface" << endl;
++ }
++ }
++ */
++
++#ifdef LOG_STREAM
++ (*logout) << "Edges meshed" << endl
++ << "time = " << GetTime() << " sec" << endl
++ << "points: " << mesh->GetNP() << endl;
++#endif
++ }
++
++ if (multithread.terminate || perfstepsend <= MESHCONST_MESHEDGES)
++ return TCL_OK;
++
++ if (perfstepsstart <= MESHCONST_MESHSURFACE)
++ {
++ OCCMeshSurface (geom, *mesh, perfstepsend);
++ if (multithread.terminate) return TCL_OK;
++
++#ifdef LOG_STREAM
++ (*logout) << "Surfaces meshed" << endl
++ << "time = " << GetTime() << " sec" << endl
++ << "points: " << mesh->GetNP() << endl;
++#endif
++
++#ifdef STAT_STREAM
++ (*statout) << mesh->GetNSeg() << " & "
++ << mesh->GetNSE() << " & - &"
++ << GetTime() << " & " << endl;
++#endif
++
++ // MeshQuality2d (*mesh);
++ mesh->CalcSurfacesOfNode();
++ }
++
++ if (multithread.terminate || perfstepsend <= MESHCONST_OPTSURFACE)
++ return TCL_OK;
++
++ if (perfstepsstart <= MESHCONST_MESHVOLUME)
++ {
++ multithread.task = "Volume meshing";
++
++ MESHING3_RESULT res = MeshVolume (mparam, *mesh);
++
++/*
++ ofstream problemfile("occmesh.rep",ios_base::app);
++
++ problemfile << "VOLUMEMESHING" << endl << endl;
++ if(res != MESHING3_OK)
++ problemfile << "ERROR" << endl << endl;
++ else
++ problemfile << "OK" << endl
++ << mesh->GetNE() << " elements" << endl << endl;
++
++ problemfile.close();
++*/
++
++ if (res != MESHING3_OK) return TCL_ERROR;
++
++ if (multithread.terminate) return TCL_OK;
++
++ RemoveIllegalElements (*mesh);
++ if (multithread.terminate) return TCL_OK;
++
++ MeshQuality3d (*mesh);
++
++#ifdef STAT_STREAM
++ (*statout) << GetTime() << " & ";
++#endif
++
++#ifdef LOG_STREAM
++ (*logout) << "Volume meshed" << endl
++ << "time = " << GetTime() << " sec" << endl
++ << "points: " << mesh->GetNP() << endl;
++#endif
++ }
++
++ if (multithread.terminate || perfstepsend <= MESHCONST_MESHVOLUME)
++ return TCL_OK;
++
++ if (perfstepsstart <= MESHCONST_OPTVOLUME)
++ {
++ multithread.task = "Volume optimization";
++
++ OptimizeVolume (mparam, *mesh);
++ if (multithread.terminate) return TCL_OK;
++
++#ifdef STAT_STREAM
++ (*statout) << GetTime() << " & "
++ << mesh->GetNE() << " & "
++ << mesh->GetNP() << " " << '\\' << '\\' << " \\" << "hline" << endl;
++#endif
++
++#ifdef LOG_STREAM
++ (*logout) << "Volume optimized" << endl
++ << "time = " << GetTime() << " sec" << endl
++ << "points: " << mesh->GetNP() << endl;
++#endif
++
++ // cout << "Optimization complete" << endl;
++
++ }
++
++ (*testout) << "NP: " << mesh->GetNP() << endl;
++ for (int i = 1; i <= mesh->GetNP(); i++)
++ (*testout) << mesh->Point(i) << endl;
++
++ (*testout) << endl << "NSegments: " << mesh->GetNSeg() << endl;
++ for (int i = 1; i <= mesh->GetNSeg(); i++)
++ (*testout) << mesh->LineSegment(i) << endl;
++
++ return TCL_OK;
++ }
++}
++
++#endif
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occgeom.cpp netgen-5.3.1_SRC_modif/libsrc/occ/occgeom.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occgeom.cpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occgeom.cpp 2019-11-14 16:56:23.366425439 +0300
+@@ -1,1612 +1,1669 @@
+-\r
+-#ifdef OCCGEOMETRY\r
+-\r
+-#include <mystdlib.h>\r
+-#include <occgeom.hpp>\r
+-#include "ShapeAnalysis_ShapeTolerance.hxx"\r
+-#include "ShapeAnalysis_ShapeContents.hxx"\r
+-#include "ShapeAnalysis_CheckSmallFace.hxx"\r
+-#include "ShapeAnalysis_DataMapOfShapeListOfReal.hxx"\r
+-#include "ShapeAnalysis_Surface.hxx"\r
+-#include "BRepAlgoAPI_Fuse.hxx"\r
+-#include "BRepCheck_Analyzer.hxx"\r
+-#include "BRepLib.hxx"\r
+-#include "ShapeBuild_ReShape.hxx"\r
+-#include "ShapeFix.hxx"\r
+-#include "ShapeFix_FixSmallFace.hxx"\r
+-#include "Partition_Spliter.hxx"\r
+-\r
+-\r
+-namespace netgen\r
+-{\r
+- void OCCGeometry :: PrintNrShapes ()\r
+- {\r
+- TopExp_Explorer e;\r
+- int count = 0;\r
+- for (e.Init(shape, TopAbs_COMPSOLID); e.More(); e.Next()) count++;\r
+- cout << "CompSolids: " << count << endl;\r
+-\r
+- cout << "Solids : " << somap.Extent() << endl;\r
+- cout << "Shells : " << shmap.Extent() << endl;\r
+- cout << "Faces : " << fmap.Extent() << endl;\r
+- cout << "Edges : " << emap.Extent() << endl;\r
+- cout << "Vertices : " << vmap.Extent() << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void PrintContents (OCCGeometry * geom)\r
+- {\r
+- ShapeAnalysis_ShapeContents cont;\r
+- cont.Clear();\r
+- cont.Perform(geom->shape);\r
+-\r
+- (*testout) << "OCC CONTENTS" << endl;\r
+- (*testout) << "============" << endl;\r
+- (*testout) << "SOLIDS : " << cont.NbSolids() << endl;\r
+- (*testout) << "SHELLS : " << cont.NbShells() << endl;\r
+- (*testout) << "FACES : " << cont.NbFaces() << endl;\r
+- (*testout) << "WIRES : " << cont.NbWires() << endl;\r
+- (*testout) << "EDGES : " << cont.NbEdges() << endl;\r
+- (*testout) << "VERTICES : " << cont.NbVertices() << endl;\r
+-\r
+- TopExp_Explorer e;\r
+- int count = 0;\r
+- for (e.Init(geom->shape, TopAbs_COMPOUND); e.More(); e.Next())\r
+- count++;\r
+- (*testout) << "Compounds: " << count << endl;\r
+-\r
+- count = 0;\r
+- for (e.Init(geom->shape, TopAbs_COMPSOLID); e.More(); e.Next())\r
+- count++;\r
+- (*testout) << "CompSolids: " << count << endl;\r
+-\r
+- (*testout) << endl;\r
+-\r
+- cout << "Highest entry in topology hierarchy: " << endl;\r
+- if (count)\r
+- cout << count << " composite solid(s)" << endl;\r
+- else\r
+- if (geom->somap.Extent())\r
+- cout << geom->somap.Extent() << " solid(s)" << endl;\r
+- else\r
+- if (geom->shmap.Extent())\r
+- cout << geom->shmap.Extent() << " shells(s)" << endl;\r
+- else\r
+- if (geom->fmap.Extent())\r
+- cout << geom->fmap.Extent() << " face(s)" << endl;\r
+- else\r
+- if (geom->wmap.Extent())\r
+- cout << geom->wmap.Extent() << " wire(s)" << endl;\r
+- else\r
+- if (geom->emap.Extent())\r
+- cout << geom->emap.Extent() << " edge(s)" << endl;\r
+- else\r
+- if (geom->vmap.Extent())\r
+- cout << geom->vmap.Extent() << " vertices(s)" << endl;\r
+- else\r
+- cout << "no entities" << endl;\r
+-\r
+- }\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: HealGeometry ()\r
+- {\r
+- int nrc = 0, nrcs = 0,\r
+- nrso = somap.Extent(),\r
+- nrsh = shmap.Extent(),\r
+- nrf = fmap.Extent(),\r
+- nrw = wmap.Extent(),\r
+- nre = emap.Extent(),\r
+- nrv = vmap.Extent();\r
+-\r
+- TopExp_Explorer exp0;\r
+- TopExp_Explorer exp1;\r
+-\r
+-\r
+- for (exp0.Init(shape, TopAbs_COMPOUND); exp0.More(); exp0.Next()) nrc++;\r
+- for (exp0.Init(shape, TopAbs_COMPSOLID); exp0.More(); exp0.Next()) nrcs++;\r
+-\r
+- double surfacecont = 0;\r
+-\r
+- {\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- rebuild->Remove(edge, false);\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+- }\r
+-\r
+- BuildFMap();\r
+-\r
+-\r
+- for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp0.Current());\r
+-\r
+- GProp_GProps system;\r
+- BRepGProp::SurfaceProperties(face, system);\r
+- surfacecont += system.Mass();\r
+- }\r
+-\r
+-\r
+- cout << "Starting geometry healing procedure (tolerance: " << tolerance << ")" << endl\r
+- << "-----------------------------------" << endl;\r
+-\r
+- {\r
+- cout << endl << "- repairing faces" << endl;\r
+-\r
+- Handle(ShapeFix_Face) sff;\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+-\r
+-\r
+- for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())\r
+- {\r
+- // Variable to hold the colour (if there exists one) of \r
+- // the current face being processed\r
+- Quantity_Color face_colour;\r
+-\r
+- TopoDS_Face face = TopoDS::Face (exp0.Current());\r
+-\r
+- if(face_colours.IsNull()\r
+- || (!(face_colours->GetColor(face,XCAFDoc_ColorSurf,face_colour))))\r
+- {\r
+- // Set the default face colour to green (Netgen Standard)\r
+- // if no colour has been defined for the face\r
+- face_colour = Quantity_Color(0.0,1.0,0.0,Quantity_TOC_RGB);\r
+- }\r
+-\r
+- sff = new ShapeFix_Face (face);\r
+- sff->FixAddNaturalBoundMode() = Standard_True;\r
+- sff->FixSmallAreaWireMode() = Standard_True;\r
+- sff->Perform();\r
+-\r
+- if(sff->Status(ShapeExtend_DONE1) ||\r
+- sff->Status(ShapeExtend_DONE2) ||\r
+- sff->Status(ShapeExtend_DONE3) ||\r
+- sff->Status(ShapeExtend_DONE4) ||\r
+- sff->Status(ShapeExtend_DONE5))\r
+- {\r
+- cout << "repaired face " << fmap.FindIndex(face) << " ";\r
+- if(sff->Status(ShapeExtend_DONE1))\r
+- cout << "(some wires are fixed)" <<endl;\r
+- else if(sff->Status(ShapeExtend_DONE2))\r
+- cout << "(orientation of wires fixed)" <<endl;\r
+- else if(sff->Status(ShapeExtend_DONE3))\r
+- cout << "(missing seam added)" <<endl;\r
+- else if(sff->Status(ShapeExtend_DONE4))\r
+- cout << "(small area wire removed)" <<endl;\r
+- else if(sff->Status(ShapeExtend_DONE5))\r
+- cout << "(natural bounds added)" <<endl;\r
+- TopoDS_Face newface = sff->Face();\r
+-\r
+- rebuild->Replace(face, newface, Standard_False);\r
+- }\r
+-\r
+- // Set the original colour of the face to the newly created \r
+- // face (after the healing process)\r
+- face = TopoDS::Face (exp0.Current());\r
+- face_colours->SetColor(face,face_colour,XCAFDoc_ColorSurf);\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+- }\r
+-\r
+-\r
+- {\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- rebuild->Remove(edge, false);\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+- }\r
+-\r
+-\r
+- if (fixsmalledges)\r
+- {\r
+- cout << endl << "- fixing small edges" << endl;\r
+-\r
+- Handle(ShapeFix_Wire) sfw;\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+-\r
+-\r
+- for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp0.Current());\r
+-\r
+- for (exp1.Init (face, TopAbs_WIRE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Wire oldwire = TopoDS::Wire(exp1.Current());\r
+- sfw = new ShapeFix_Wire (oldwire, face ,tolerance);\r
+- sfw->ModifyTopologyMode() = Standard_True;\r
+-\r
+- sfw->ClosedWireMode() = Standard_True;\r
+-\r
+- bool replace = false;\r
+-\r
+- replace = sfw->FixReorder() || replace;\r
+-\r
+- replace = sfw->FixConnected() || replace;\r
+-\r
+-\r
+-\r
+- if (sfw->FixSmall (Standard_False, tolerance) && ! (sfw->StatusSmall(ShapeExtend_FAIL1) ||\r
+- sfw->StatusSmall(ShapeExtend_FAIL2) ||\r
+- sfw->StatusSmall(ShapeExtend_FAIL3)))\r
+- {\r
+- cout << "Fixed small edge in wire " << wmap.FindIndex (oldwire) << endl;\r
+- replace = true;\r
+-\r
+- }\r
+- else if (sfw->StatusSmall(ShapeExtend_FAIL1))\r
+- cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)\r
+- << ", edge cannot be checked (no 3d curve and no pcurve)" << endl;\r
+- else if (sfw->StatusSmall(ShapeExtend_FAIL2))\r
+- cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)\r
+- << ", edge is null-length and has different vertives at begin and end, and lockvtx is True or ModifiyTopologyMode is False" << endl;\r
+- else if (sfw->StatusSmall(ShapeExtend_FAIL3))\r
+- cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)\r
+- << ", CheckConnected has failed" << endl;\r
+-\r
+- replace = sfw->FixEdgeCurves() || replace;\r
+-\r
+- replace = sfw->FixDegenerated() || replace;\r
+-\r
+- replace = sfw->FixSelfIntersection() || replace;\r
+-\r
+- replace = sfw->FixLacking(Standard_True) || replace;\r
+-\r
+- if(replace)\r
+- {\r
+- TopoDS_Wire newwire = sfw->Wire();\r
+- rebuild->Replace(oldwire, newwire, Standard_False);\r
+- }\r
+-\r
+- //delete sfw; sfw = NULL;\r
+-\r
+- }\r
+- }\r
+-\r
+- shape = rebuild->Apply(shape);\r
+-\r
+-\r
+-\r
+- {\r
+- BuildFMap();\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+-\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if (vmap.FindIndex(TopExp::FirstVertex (edge)) ==\r
+- vmap.FindIndex(TopExp::LastVertex (edge)))\r
+- {\r
+- GProp_GProps system;\r
+- BRepGProp::LinearProperties(edge, system);\r
+- if (system.Mass() < tolerance)\r
+- {\r
+- cout << "removing degenerated edge " << emap.FindIndex(edge)\r
+- << " from vertex " << vmap.FindIndex(TopExp::FirstVertex (edge))\r
+- << " to vertex " << vmap.FindIndex(TopExp::LastVertex (edge)) << endl;\r
+- rebuild->Remove(edge, false);\r
+- }\r
+- }\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+-\r
+- //delete rebuild; rebuild = NULL;\r
+- }\r
+-\r
+-\r
+-\r
+- {\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- rebuild->Remove(edge, false);\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- Handle(ShapeFix_Wireframe) sfwf = new ShapeFix_Wireframe;\r
+- sfwf->SetPrecision(tolerance);\r
+- sfwf->Load (shape);\r
+- sfwf->ModeDropSmallEdges() = Standard_True;\r
+-\r
+- sfwf->SetPrecision(boundingbox.Diam());\r
+-\r
+- if (sfwf->FixWireGaps())\r
+- {\r
+- cout << endl << "- fixing wire gaps" << endl;\r
+- if (sfwf->StatusWireGaps(ShapeExtend_OK)) cout << "no gaps found" << endl;\r
+- if (sfwf->StatusWireGaps(ShapeExtend_DONE1)) cout << "some 2D gaps fixed" << endl;\r
+- if (sfwf->StatusWireGaps(ShapeExtend_DONE2)) cout << "some 3D gaps fixed" << endl;\r
+- if (sfwf->StatusWireGaps(ShapeExtend_FAIL1)) cout << "failed to fix some 2D gaps" << endl;\r
+- if (sfwf->StatusWireGaps(ShapeExtend_FAIL2)) cout << "failed to fix some 3D gaps" << endl;\r
+- }\r
+-\r
+- sfwf->SetPrecision(tolerance);\r
+-\r
+-\r
+- {\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- cout << "degenerated edge at position 4" << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- if (sfwf->FixSmallEdges())\r
+- {\r
+- cout << endl << "- fixing wire frames" << endl;\r
+- if (sfwf->StatusSmallEdges(ShapeExtend_OK)) cout << "no small edges found" << endl;\r
+- if (sfwf->StatusSmallEdges(ShapeExtend_DONE1)) cout << "some small edges fixed" << endl;\r
+- if (sfwf->StatusSmallEdges(ShapeExtend_FAIL1)) cout << "failed to fix some small edges" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+- shape = sfwf->Shape();\r
+-\r
+- //delete sfwf; sfwf = NULL;\r
+- //delete rebuild; rebuild = NULL;\r
+-\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+- {\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- cout << "degenerated edge at position 5" << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- if (fixspotstripfaces)\r
+- {\r
+-\r
+- cout << endl << "- fixing spot and strip faces" << endl;\r
+- Handle(ShapeFix_FixSmallFace) sffsm = new ShapeFix_FixSmallFace();\r
+- sffsm -> Init (shape);\r
+- sffsm -> SetPrecision (tolerance);\r
+- sffsm -> Perform();\r
+-\r
+- shape = sffsm -> FixShape();\r
+- //delete sffsm; sffsm = NULL;\r
+- }\r
+-\r
+-\r
+- {\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- cout << "degenerated edge at position 6" << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- if (sewfaces)\r
+- {\r
+- cout << endl << "- sewing faces" << endl;\r
+-\r
+- BRepOffsetAPI_Sewing sewedObj(tolerance);\r
+-\r
+- for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face (exp0.Current());\r
+- sewedObj.Add (face);\r
+- }\r
+-\r
+- sewedObj.Perform();\r
+-\r
+- if (!sewedObj.SewedShape().IsNull())\r
+- shape = sewedObj.SewedShape();\r
+- else\r
+- cout << " not possible";\r
+- }\r
+-\r
+-\r
+-\r
+- {\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(shape);\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- rebuild->Remove(edge, false);\r
+- }\r
+- shape = rebuild->Apply(shape);\r
+- }\r
+-\r
+-\r
+- if (makesolids)\r
+- {\r
+- cout << endl << "- making solids" << endl;\r
+-\r
+- BRepBuilderAPI_MakeSolid ms;\r
+- int count = 0;\r
+- for (exp0.Init(shape, TopAbs_SHELL); exp0.More(); exp0.Next())\r
+- {\r
+- count++;\r
+- ms.Add (TopoDS::Shell(exp0.Current()));\r
+- }\r
+-\r
+- if (!count)\r
+- {\r
+- cout << " not possible (no shells)" << endl;\r
+- }\r
+- else\r
+- {\r
+- BRepCheck_Analyzer ba(ms);\r
+- if (ba.IsValid ())\r
+- {\r
+- Handle(ShapeFix_Shape) sfs = new ShapeFix_Shape;\r
+- sfs->Init (ms);\r
+- sfs->SetPrecision(tolerance);\r
+- sfs->SetMaxTolerance(tolerance);\r
+- sfs->Perform();\r
+- shape = sfs->Shape();\r
+-\r
+- for (exp0.Init(shape, TopAbs_SOLID); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Solid solid = TopoDS::Solid(exp0.Current());\r
+- TopoDS_Solid newsolid = solid;\r
+- BRepLib::OrientClosedSolid (newsolid);\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- // rebuild->Apply(shape);\r
+- rebuild->Replace(solid, newsolid, Standard_False);\r
+- TopoDS_Shape newshape = rebuild->Apply(shape, TopAbs_COMPSOLID);//, 1);\r
+- // TopoDS_Shape newshape = rebuild->Apply(shape);\r
+- shape = newshape;\r
+- }\r
+-\r
+- //delete sfs; sfs = NULL;\r
+- }\r
+- else\r
+- cout << " not possible" << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- if (splitpartitions)\r
+- {\r
+- cout << "- running SALOME partition splitter" << endl;\r
+-\r
+- TopExp_Explorer e2;\r
+- Partition_Spliter ps;\r
+- int count = 0;\r
+-\r
+- for (e2.Init (shape, TopAbs_SOLID);\r
+- e2.More(); e2.Next())\r
+- {\r
+- count++;\r
+- ps.AddShape (e2.Current());\r
+- }\r
+-\r
+- ps.Compute();\r
+- shape = ps.Shape();\r
+-\r
+- cout << " before: " << count << " solids" << endl;\r
+-\r
+- count = 0;\r
+- for (e2.Init (shape, TopAbs_SOLID);\r
+- e2.More(); e2.Next()) count++;\r
+-\r
+- cout << " after : " << count << " solids" << endl;\r
+- }\r
+-\r
+- BuildFMap();\r
+-\r
+-\r
+-\r
+- {\r
+- for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp1.Current());\r
+- if ( BRep_Tool::Degenerated(edge) )\r
+- cout << "degenerated edge at position 8" << endl;\r
+- }\r
+- }\r
+-\r
+-\r
+- double newsurfacecont = 0;\r
+-\r
+-\r
+- for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp0.Current());\r
+- GProp_GProps system;\r
+- BRepGProp::SurfaceProperties(face, system);\r
+- newsurfacecont += system.Mass();\r
+- }\r
+-\r
+-\r
+- int nnrc = 0, nnrcs = 0,\r
+- nnrso = somap.Extent(),\r
+- nnrsh = shmap.Extent(),\r
+- nnrf = fmap.Extent(),\r
+- nnrw = wmap.Extent(),\r
+- nnre = emap.Extent(),\r
+- nnrv = vmap.Extent();\r
+-\r
+- for (exp0.Init(shape, TopAbs_COMPOUND); exp0.More(); exp0.Next()) nnrc++;\r
+- for (exp0.Init(shape, TopAbs_COMPSOLID); exp0.More(); exp0.Next()) nnrcs++;\r
+-\r
+- cout << "-----------------------------------" << endl;\r
+- cout << "Compounds : " << nnrc << " (" << nrc << ")" << endl;\r
+- cout << "Composite solids: " << nnrcs << " (" << nrcs << ")" << endl;\r
+- cout << "Solids : " << nnrso << " (" << nrso << ")" << endl;\r
+- cout << "Shells : " << nnrsh << " (" << nrsh << ")" << endl;\r
+- cout << "Wires : " << nnrw << " (" << nrw << ")" << endl;\r
+- cout << "Faces : " << nnrf << " (" << nrf << ")" << endl;\r
+- cout << "Edges : " << nnre << " (" << nre << ")" << endl;\r
+- cout << "Vertices : " << nnrv << " (" << nrv << ")" << endl;\r
+- cout << endl;\r
+- cout << "Totol surface area : " << newsurfacecont << " (" << surfacecont << ")" << endl;\r
+- cout << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: BuildFMap()\r
+- {\r
+- somap.Clear();\r
+- shmap.Clear();\r
+- fmap.Clear();\r
+- wmap.Clear();\r
+- emap.Clear();\r
+- vmap.Clear();\r
+-\r
+- TopExp_Explorer exp0, exp1, exp2, exp3, exp4, exp5;\r
+-\r
+- for (exp0.Init(shape, TopAbs_COMPOUND);\r
+- exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Compound compound = TopoDS::Compound (exp0.Current());\r
+- (*testout) << "compound" << endl;\r
+- int i = 0;\r
+- for (exp1.Init(compound, TopAbs_SHELL);\r
+- exp1.More(); exp1.Next())\r
+- {\r
+- (*testout) << "shell " << ++i << endl;\r
+- }\r
+- }\r
+-\r
+- for (exp0.Init(shape, TopAbs_SOLID);\r
+- exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Solid solid = TopoDS::Solid (exp0.Current());\r
+-\r
+- if (somap.FindIndex(solid) < 1)\r
+- {\r
+- somap.Add (solid);\r
+-\r
+- for (exp1.Init(solid, TopAbs_SHELL);\r
+- exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Shell shell = TopoDS::Shell (exp1.Current());\r
+- if (shmap.FindIndex(shell) < 1)\r
+- {\r
+- shmap.Add (shell);\r
+-\r
+- for (exp2.Init(shell, TopAbs_FACE);\r
+- exp2.More(); exp2.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp2.Current());\r
+- if (fmap.FindIndex(face) < 1)\r
+- {\r
+- fmap.Add (face);\r
+- (*testout) << "face " << fmap.FindIndex(face) << " ";\r
+- (*testout) << ((face.Orientation() == TopAbs_REVERSED) ? "-" : "+") << ", ";\r
+- (*testout) << ((exp2.Current().Orientation() == TopAbs_REVERSED) ? "-" : "+") << endl;\r
+- for (exp3.Init(exp2.Current(), TopAbs_WIRE);\r
+- exp3.More(); exp3.Next())\r
+- {\r
+- TopoDS_Wire wire = TopoDS::Wire (exp3.Current());\r
+- if (wmap.FindIndex(wire) < 1)\r
+- {\r
+- wmap.Add (wire);\r
+-\r
+- for (exp4.Init(exp3.Current(), TopAbs_EDGE);\r
+- exp4.More(); exp4.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp4.Current());\r
+- if (emap.FindIndex(edge) < 1)\r
+- {\r
+- emap.Add (edge);\r
+- for (exp5.Init(exp4.Current(), TopAbs_VERTEX);\r
+- exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+- // Free Shells\r
+- for (exp1.Init(shape, TopAbs_SHELL, TopAbs_SOLID); exp1.More(); exp1.Next())\r
+- {\r
+- TopoDS_Shell shell = TopoDS::Shell(exp1.Current());\r
+- if (shmap.FindIndex(shell) < 1)\r
+- {\r
+- shmap.Add (shell);\r
+-\r
+- (*testout) << "shell " << shmap.FindIndex(shell) << " ";\r
+- (*testout) << ((shell.Orientation() == TopAbs_REVERSED) ? "-" : "+") << ", ";\r
+- (*testout) << ((exp1.Current().Orientation() == TopAbs_REVERSED) ? "-" : "+") << endl;\r
+-\r
+- for (exp2.Init(shell, TopAbs_FACE); exp2.More(); exp2.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp2.Current());\r
+- if (fmap.FindIndex(face) < 1)\r
+- {\r
+- fmap.Add (face);\r
+-\r
+- for (exp3.Init(face, TopAbs_WIRE); exp3.More(); exp3.Next())\r
+- {\r
+- TopoDS_Wire wire = TopoDS::Wire (exp3.Current());\r
+- if (wmap.FindIndex(wire) < 1)\r
+- {\r
+- wmap.Add (wire);\r
+-\r
+- for (exp4.Init(wire, TopAbs_EDGE); exp4.More(); exp4.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp4.Current());\r
+- if (emap.FindIndex(edge) < 1)\r
+- {\r
+- emap.Add (edge);\r
+- for (exp5.Init(edge, TopAbs_VERTEX); exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- // Free Faces\r
+-\r
+- for (exp2.Init(shape, TopAbs_FACE, TopAbs_SHELL); exp2.More(); exp2.Next())\r
+- {\r
+- TopoDS_Face face = TopoDS::Face(exp2.Current());\r
+- if (fmap.FindIndex(face) < 1)\r
+- {\r
+- fmap.Add (face);\r
+-\r
+- for (exp3.Init(exp2.Current(), TopAbs_WIRE); exp3.More(); exp3.Next())\r
+- {\r
+- TopoDS_Wire wire = TopoDS::Wire (exp3.Current());\r
+- if (wmap.FindIndex(wire) < 1)\r
+- {\r
+- wmap.Add (wire);\r
+-\r
+- for (exp4.Init(exp3.Current(), TopAbs_EDGE); exp4.More(); exp4.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp4.Current());\r
+- if (emap.FindIndex(edge) < 1)\r
+- {\r
+- emap.Add (edge);\r
+- for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- // Free Wires\r
+-\r
+- for (exp3.Init(shape, TopAbs_WIRE, TopAbs_FACE); exp3.More(); exp3.Next())\r
+- {\r
+- TopoDS_Wire wire = TopoDS::Wire (exp3.Current());\r
+- if (wmap.FindIndex(wire) < 1)\r
+- {\r
+- wmap.Add (wire);\r
+-\r
+- for (exp4.Init(exp3.Current(), TopAbs_EDGE); exp4.More(); exp4.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp4.Current());\r
+- if (emap.FindIndex(edge) < 1)\r
+- {\r
+- emap.Add (edge);\r
+- for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+- }\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- // Free Edges\r
+-\r
+- for (exp4.Init(shape, TopAbs_EDGE, TopAbs_WIRE); exp4.More(); exp4.Next())\r
+- {\r
+- TopoDS_Edge edge = TopoDS::Edge(exp4.Current());\r
+- if (emap.FindIndex(edge) < 1)\r
+- {\r
+- emap.Add (edge);\r
+- for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- // Free Vertices\r
+-\r
+- for (exp5.Init(shape, TopAbs_VERTEX, TopAbs_EDGE); exp5.More(); exp5.Next())\r
+- {\r
+- TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());\r
+- if (vmap.FindIndex(vertex) < 1)\r
+- vmap.Add (vertex);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- facemeshstatus.DeleteAll();\r
+- facemeshstatus.SetSize (fmap.Extent());\r
+- facemeshstatus = 0;\r
+-\r
+- // Philippose - 15/01/2009\r
+- face_maxh.DeleteAll();\r
+- face_maxh.SetSize (fmap.Extent());\r
+- face_maxh = mparam.maxh;\r
+-\r
+- // Philippose - 15/01/2010 \r
+- face_maxh_modified.DeleteAll(); \r
+- face_maxh_modified.SetSize(fmap.Extent()); \r
+- face_maxh_modified = 0;\r
+- \r
+-\r
+- // Philippose - 17/01/2009\r
+- face_sel_status.DeleteAll();\r
+- face_sel_status.SetSize (fmap.Extent());\r
+- face_sel_status = 0;\r
+-\r
+- fvispar.SetSize (fmap.Extent());\r
+- evispar.SetSize (emap.Extent());\r
+- vvispar.SetSize (vmap.Extent());\r
+-\r
+- fsingular.SetSize (fmap.Extent());\r
+- esingular.SetSize (emap.Extent());\r
+- vsingular.SetSize (vmap.Extent());\r
+-\r
+- fsingular = esingular = vsingular = false;\r
+- }\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: SewFaces ()\r
+- {\r
+- (*testout) << "Trying to sew faces ..." << endl;\r
+- cout << "Trying to sew faces ..." << flush;\r
+-\r
+- BRepOffsetAPI_Sewing sewedObj(1);\r
+- \r
+- for (int i = 1; i <= fmap.Extent(); i++)\r
+- {\r
+- TopoDS_Face face = TopoDS::Face (fmap(i));\r
+- sewedObj.Add (face);\r
+- }\r
+-\r
+- sewedObj.Perform();\r
+-\r
+- if (!sewedObj.SewedShape().IsNull())\r
+- {\r
+- shape = sewedObj.SewedShape();\r
+- cout << " done" << endl;\r
+- }\r
+- else\r
+- cout << " not possible";\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: MakeSolid ()\r
+- {\r
+- TopExp_Explorer exp0;\r
+-\r
+- (*testout) << "Trying to build solids ..." << endl;\r
+- cout << "Trying to build solids ..." << flush;\r
+-\r
+- BRepBuilderAPI_MakeSolid ms;\r
+- int count = 0;\r
+- for (exp0.Init(shape, TopAbs_SHELL); exp0.More(); exp0.Next())\r
+- {\r
+- count++;\r
+- ms.Add (TopoDS::Shell(exp0.Current()));\r
+- }\r
+-\r
+- if (!count)\r
+- {\r
+- cout << " not possible (no shells)" << endl;\r
+- return;\r
+- }\r
+-\r
+- BRepCheck_Analyzer ba(ms);\r
+- if (ba.IsValid ())\r
+- {\r
+- Handle(ShapeFix_Shape) sfs = new ShapeFix_Shape;\r
+- sfs->Init (ms);\r
+-\r
+- sfs->SetPrecision(1e-5);\r
+- sfs->SetMaxTolerance(1e-5);\r
+-\r
+- sfs->Perform();\r
+-\r
+- shape = sfs->Shape();\r
+-\r
+- for (exp0.Init(shape, TopAbs_SOLID); exp0.More(); exp0.Next())\r
+- {\r
+- TopoDS_Solid solid = TopoDS::Solid(exp0.Current());\r
+- TopoDS_Solid newsolid = solid;\r
+- BRepLib::OrientClosedSolid (newsolid);\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Replace(solid, newsolid, Standard_False);\r
+-\r
+- TopoDS_Shape newshape = rebuild->Apply(shape, TopAbs_SHAPE, 1);\r
+- shape = newshape;\r
+- }\r
+-\r
+- cout << " done" << endl;\r
+- }\r
+- else\r
+- cout << " not possible" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: BuildVisualizationMesh (double deflection)\r
+- {\r
+- cout << "Preparing visualization (deflection = " << deflection << ") ... " << flush;\r
+-\r
+- BRepTools::Clean (shape);\r
+- // BRepMesh_IncrementalMesh::\r
+- BRepMesh_IncrementalMesh (shape, deflection, true);\r
+- cout << "done" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: CalcBoundingBox ()\r
+- {\r
+- Bnd_Box bb;\r
+- BRepBndLib::Add (shape, bb);\r
+-\r
+- double x1,y1,z1,x2,y2,z2;\r
+- bb.Get (x1,y1,z1,x2,y2,z2);\r
+- Point<3> p1 = Point<3> (x1,y1,z1);\r
+- Point<3> p2 = Point<3> (x2,y2,z2);\r
+-\r
+- (*testout) << "Bounding Box = [" << p1 << " - " << p2 << "]" << endl;\r
+- boundingbox = Box<3> (p1,p2);\r
+- SetCenter();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: Project (int surfi, Point<3> & p) const\r
+- {\r
+- static int cnt = 0;\r
+- if (++cnt % 1000 == 0) cout << "Project cnt = " << cnt << endl;\r
+-\r
+- gp_Pnt pnt(p(0), p(1), p(2));\r
+-\r
+- double u,v;\r
+- Handle( Geom_Surface ) thesurf = BRep_Tool::Surface(TopoDS::Face(fmap(surfi)));\r
+- Handle( ShapeAnalysis_Surface ) su = new ShapeAnalysis_Surface( thesurf );\r
+- gp_Pnt2d suval = su->ValueOfUV ( pnt, BRep_Tool::Tolerance( TopoDS::Face(fmap(surfi)) ) );\r
+- suval.Coord( u, v);\r
+- pnt = thesurf->Value( u, v );\r
+-\r
+-\r
+- p = Point<3> (pnt.X(), pnt.Y(), pnt.Z());\r
+-\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- bool OCCGeometry :: FastProject (int surfi, Point<3> & ap, double& u, double& v) const\r
+- {\r
+- gp_Pnt p(ap(0), ap(1), ap(2));\r
+-\r
+- Handle(Geom_Surface) surface = BRep_Tool::Surface(TopoDS::Face(fmap(surfi)));\r
+-\r
+- gp_Pnt x = surface->Value (u,v);\r
+-\r
+- if (p.SquareDistance(x) <= sqr(PROJECTION_TOLERANCE)) return true;\r
+-\r
+- gp_Vec du, dv;\r
+-\r
+- surface->D1(u,v,x,du,dv);\r
+-\r
+- int count = 0;\r
+-\r
+- gp_Pnt xold;\r
+- gp_Vec n;\r
+- double det, lambda, mu;\r
+-\r
+- do {\r
+- count++;\r
+-\r
+- n = du^dv;\r
+-\r
+- det = Det3 (n.X(), du.X(), dv.X(),\r
+- n.Y(), du.Y(), dv.Y(),\r
+- n.Z(), du.Z(), dv.Z());\r
+-\r
+- if (det < 1e-15) return false;\r
+-\r
+- lambda = Det3 (n.X(), p.X()-x.X(), dv.X(),\r
+- n.Y(), p.Y()-x.Y(), dv.Y(),\r
+- n.Z(), p.Z()-x.Z(), dv.Z())/det;\r
+-\r
+- mu = Det3 (n.X(), du.X(), p.X()-x.X(),\r
+- n.Y(), du.Y(), p.Y()-x.Y(),\r
+- n.Z(), du.Z(), p.Z()-x.Z())/det;\r
+-\r
+- u += lambda;\r
+- v += mu;\r
+-\r
+- xold = x;\r
+- surface->D1(u,v,x,du,dv);\r
+-\r
+- } while (xold.SquareDistance(x) > sqr(PROJECTION_TOLERANCE) && count < 50);\r
+-\r
+- // (*testout) << "FastProject count: " << count << endl;\r
+-\r
+- if (count == 50) return false;\r
+-\r
+- ap = Point<3> (x.X(), x.Y(), x.Z());\r
+-\r
+- return true;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: WriteOCC_STL(char * filename)\r
+- {\r
+- cout << "writing stl..."; cout.flush();\r
+- StlAPI_Writer writer;\r
+- writer.RelativeMode() = Standard_False;\r
+-\r
+- writer.SetDeflection(0.02);\r
+- writer.Write(shape,filename);\r
+-\r
+- cout << "done" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+- // Philippose - 23/02/2009\r
+- /* Special IGES File load function including the ability\r
+- to extract individual surface colours via the extended\r
+- OpenCascade XDE and XCAF Feature set.\r
+- */\r
+- OCCGeometry *LoadOCC_IGES(const char *filename)\r
+- {\r
+- OCCGeometry *occgeo;\r
+- occgeo = new OCCGeometry;\r
+-\r
+- // Initiate a dummy XCAF Application to handle the IGES XCAF Document\r
+- static Handle_XCAFApp_Application dummy_app = XCAFApp_Application::GetApplication();\r
+-\r
+- // Create an XCAF Document to contain the IGES file itself\r
+- Handle_TDocStd_Document iges_doc;\r
+-\r
+- // Check if a IGES File is already open under this handle, if so, close it to prevent\r
+- // Segmentation Faults when trying to create a new document\r
+- if(dummy_app->NbDocuments() > 0)\r
+- {\r
+- dummy_app->GetDocument(1,iges_doc);\r
+- dummy_app->Close(iges_doc);\r
+- }\r
+- dummy_app->NewDocument ("IGES-XCAF",iges_doc);\r
+-\r
+- IGESCAFControl_Reader reader;\r
+-\r
+- Standard_Integer stat = reader.ReadFile((char*)filename);\r
+-\r
+- if(stat != IFSelect_RetDone)\r
+- {\r
+- delete occgeo;\r
+- return NULL;\r
+- }\r
+-\r
+- // Enable transfer of colours\r
+- reader.SetColorMode(Standard_True);\r
+-\r
+- reader.Transfer(iges_doc);\r
+-\r
+- // Read in the shape(s) and the colours present in the IGES File\r
+- Handle_XCAFDoc_ShapeTool iges_shape_contents = XCAFDoc_DocumentTool::ShapeTool(iges_doc->Main());\r
+- Handle_XCAFDoc_ColorTool iges_colour_contents = XCAFDoc_DocumentTool::ColorTool(iges_doc->Main());\r
+-\r
+- TDF_LabelSequence iges_shapes;\r
+- iges_shape_contents->GetShapes(iges_shapes);\r
+-\r
+- // List out the available colours in the IGES File as Colour Names\r
+- TDF_LabelSequence all_colours;\r
+- iges_colour_contents->GetColors(all_colours);\r
+- PrintMessage(1,"Number of colours in IGES File: ",all_colours.Length());\r
+- for(int i = 1; i <= all_colours.Length(); i++)\r
+- {\r
+- Quantity_Color col;\r
+- stringstream col_rgb;\r
+- iges_colour_contents->GetColor(all_colours.Value(i),col);\r
+- col_rgb << " : (" << col.Red() << "," << col.Green() << "," << col.Blue() << ")";\r
+- PrintMessage(1, "Colour [", i, "] = ",col.StringName(col.Name()),col_rgb.str());\r
+- }\r
+-\r
+-\r
+- // For the IGES Reader, all the shapes can be exported as one compund shape \r
+- // using the "OneShape" member\r
+- occgeo->shape = reader.OneShape();\r
+- occgeo->face_colours = iges_colour_contents;\r
+- occgeo->changed = 1;\r
+- occgeo->BuildFMap();\r
+-\r
+- occgeo->CalcBoundingBox();\r
+- PrintContents (occgeo);\r
+-\r
+- return occgeo;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+- // Philippose - 29/01/2009\r
+- /* Special STEP File load function including the ability\r
+- to extract individual surface colours via the extended\r
+- OpenCascade XDE and XCAF Feature set.\r
+- */\r
+- OCCGeometry * LoadOCC_STEP (const char * filename)\r
+- {\r
+- OCCGeometry * occgeo;\r
+- occgeo = new OCCGeometry;\r
+-\r
+- // Initiate a dummy XCAF Application to handle the STEP XCAF Document\r
+- static Handle_XCAFApp_Application dummy_app = XCAFApp_Application::GetApplication();\r
+-\r
+- // Create an XCAF Document to contain the STEP file itself\r
+- Handle_TDocStd_Document step_doc;\r
+-\r
+- // Check if a STEP File is already open under this handle, if so, close it to prevent\r
+- // Segmentation Faults when trying to create a new document\r
+- if(dummy_app->NbDocuments() > 0)\r
+- {\r
+- dummy_app->GetDocument(1,step_doc);\r
+- dummy_app->Close(step_doc);\r
+- }\r
+- dummy_app->NewDocument ("STEP-XCAF",step_doc);\r
+-\r
+- STEPCAFControl_Reader reader;\r
+-\r
+- // Enable transfer of colours\r
+- reader.SetColorMode(Standard_True);\r
+-\r
+- Standard_Integer stat = reader.ReadFile((char*)filename);\r
+-\r
+- if(stat != IFSelect_RetDone)\r
+- {\r
+- delete occgeo;\r
+- return NULL;\r
+- }\r
+-\r
+- reader.Transfer(step_doc);\r
+-\r
+- // Read in the shape(s) and the colours present in the STEP File\r
+- Handle_XCAFDoc_ShapeTool step_shape_contents = XCAFDoc_DocumentTool::ShapeTool(step_doc->Main());\r
+- Handle_XCAFDoc_ColorTool step_colour_contents = XCAFDoc_DocumentTool::ColorTool(step_doc->Main());\r
+-\r
+- TDF_LabelSequence step_shapes;\r
+- step_shape_contents->GetShapes(step_shapes);\r
+-\r
+- // List out the available colours in the STEP File as Colour Names\r
+- TDF_LabelSequence all_colours;\r
+- step_colour_contents->GetColors(all_colours);\r
+- PrintMessage(1,"Number of colours in STEP File: ",all_colours.Length());\r
+- for(int i = 1; i <= all_colours.Length(); i++)\r
+- {\r
+- Quantity_Color col;\r
+- stringstream col_rgb;\r
+- step_colour_contents->GetColor(all_colours.Value(i),col);\r
+- col_rgb << " : (" << col.Red() << "," << col.Green() << "," << col.Blue() << ")";\r
+- PrintMessage(1, "Colour [", i, "] = ",col.StringName(col.Name()),col_rgb.str());\r
+- }\r
+-\r
+-\r
+- // For the STEP File Reader in OCC, the 1st Shape contains the entire \r
+- // compound geometry as one shape\r
+- occgeo->shape = step_shape_contents->GetShape(step_shapes.Value(1));\r
+- occgeo->face_colours = step_colour_contents;\r
+- occgeo->changed = 1;\r
+- occgeo->BuildFMap();\r
+-\r
+- occgeo->CalcBoundingBox();\r
+- PrintContents (occgeo);\r
+-\r
+- return occgeo;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- OCCGeometry *LoadOCC_BREP (const char *filename)\r
+- {\r
+- OCCGeometry * occgeo;\r
+- occgeo = new OCCGeometry;\r
+-\r
+- BRep_Builder aBuilder;\r
+- Standard_Boolean result = BRepTools::Read(occgeo->shape, const_cast<char*> (filename),aBuilder);\r
+-\r
+- if(!result)\r
+- {\r
+- delete occgeo;\r
+- return NULL;\r
+- }\r
+-\r
+- // Philippose - 23/02/2009\r
+- // Fixed a bug in the OpenCascade XDE Colour handling when \r
+- // opening BREP Files, since BREP Files have no colour data.\r
+- // Hence, the face_colours Handle needs to be created as a NULL handle.\r
+- occgeo->face_colours = Handle_XCAFDoc_ColorTool();\r
+- occgeo->face_colours.Nullify();\r
+- occgeo->changed = 1;\r
+- occgeo->BuildFMap();\r
+-\r
+- occgeo->CalcBoundingBox();\r
+- PrintContents (occgeo);\r
+-\r
+- return occgeo;\r
+- }\r
+-\r
+-\r
+- void OCCGeometry :: Save (string sfilename) const\r
+- {\r
+- const char * filename = sfilename.c_str();\r
+- if (strlen(filename) < 4) \r
+- throw NgException ("illegal filename");\r
+- \r
+- if (strcmp (&filename[strlen(filename)-3], "igs") == 0)\r
+- {\r
+- IGESControl_Writer writer("millimeters", 1);\r
+- writer.AddShape (shape);\r
+- writer.Write (filename);\r
+- }\r
+- else if (strcmp (&filename[strlen(filename)-3], "stp") == 0)\r
+- {\r
+- STEPControl_Writer writer;\r
+- writer.Transfer (shape, STEPControl_AsIs);\r
+- writer.Write (filename);\r
+- }\r
+- else if (strcmp (&filename[strlen(filename)-3], "stl") == 0)\r
+- {\r
+- StlAPI_Writer writer;\r
+- writer.ASCIIMode() = Standard_True;\r
+- writer.Write (shape, filename);\r
+- }\r
+- else if (strcmp (&filename[strlen(filename)-4], "stlb") == 0)\r
+- {\r
+- StlAPI_Writer writer;\r
+- writer.ASCIIMode() = Standard_False;\r
+- writer.Write (shape, filename);\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- const char * shapesname[] =\r
+- {" ", "CompSolids", "Solids", "Shells",\r
+-\r
+- "Faces", "Wires", "Edges", "Vertices"};\r
+-\r
+- const char * shapename[] =\r
+- {" ", "CompSolid", "Solid", "Shell",\r
+- "Face", "Wire", "Edge", "Vertex"};\r
+-\r
+- const char * orientationstring[] =\r
+- {"+", "-"};\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: RecursiveTopologyTree (const TopoDS_Shape & sh,\r
+- stringstream & str,\r
+- TopAbs_ShapeEnum l,\r
+- bool isfree,\r
+- const char * lname)\r
+- {\r
+- if (l > TopAbs_VERTEX) return;\r
+-\r
+- TopExp_Explorer e;\r
+- int count = 0;\r
+- int count2 = 0;\r
+-\r
+- if (isfree)\r
+- e.Init(sh, l, TopAbs_ShapeEnum(l-1));\r
+- else\r
+- e.Init(sh, l);\r
+-\r
+- for (; e.More(); e.Next())\r
+- {\r
+- count++;\r
+-\r
+- stringstream lname2;\r
+- lname2 << lname << "/" << shapename[l] << count;\r
+- str << lname2.str() << " ";\r
+-\r
+- switch (e.Current().ShapeType())\r
+- {\r
+- case TopAbs_SOLID:\r
+- count2 = somap.FindIndex(TopoDS::Solid(e.Current())); break;\r
+- case TopAbs_SHELL:\r
+- count2 = shmap.FindIndex(TopoDS::Shell(e.Current())); break;\r
+- case TopAbs_FACE:\r
+- count2 = fmap.FindIndex(TopoDS::Face(e.Current())); break;\r
+- case TopAbs_WIRE:\r
+- count2 = wmap.FindIndex(TopoDS::Wire(e.Current())); break;\r
+- case TopAbs_EDGE:\r
+- count2 = emap.FindIndex(TopoDS::Edge(e.Current())); break;\r
+- case TopAbs_VERTEX:\r
+- count2 = vmap.FindIndex(TopoDS::Vertex(e.Current())); break;\r
+- default:\r
+- cout << "RecursiveTopologyTree: Case " << e.Current().ShapeType() << " not handeled" << endl;\r
+- }\r
+-\r
+- int nrsubshapes = 0;\r
+-\r
+- if (l <= TopAbs_WIRE)\r
+- {\r
+- TopExp_Explorer e2;\r
+- for (e2.Init (e.Current(), TopAbs_ShapeEnum (l+1));\r
+- e2.More(); e2.Next())\r
+- nrsubshapes++;\r
+- }\r
+-\r
+- str << "{" << shapename[l] << " " << count2;\r
+-\r
+- if (l <= TopAbs_EDGE)\r
+- {\r
+- str << " (" << orientationstring[e.Current().Orientation()];\r
+- if (nrsubshapes != 0) str << ", " << nrsubshapes;\r
+- str << ") } ";\r
+- }\r
+- else\r
+- str << " } ";\r
+-\r
+- RecursiveTopologyTree (e.Current(), str, TopAbs_ShapeEnum (l+1),\r
+- false, (char*)lname2.str().c_str());\r
+-\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: GetTopologyTree (stringstream & str)\r
+- {\r
+- cout << "Building topology tree ... " << flush;\r
+- RecursiveTopologyTree (shape, str, TopAbs_COMPSOLID, false, "CompSolids");\r
+- RecursiveTopologyTree (shape, str, TopAbs_SOLID, true, "FreeSolids");\r
+- RecursiveTopologyTree (shape, str, TopAbs_SHELL, true, "FreeShells");\r
+- RecursiveTopologyTree (shape, str, TopAbs_FACE, true, "FreeFaces");\r
+- RecursiveTopologyTree (shape, str, TopAbs_WIRE, true, "FreeWires");\r
+- RecursiveTopologyTree (shape, str, TopAbs_EDGE, true, "FreeEdges");\r
+- RecursiveTopologyTree (shape, str, TopAbs_VERTEX, true, "FreeVertices");\r
+- str << flush;\r
+- // cout << "done" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: CheckIrregularEntities(stringstream & str)\r
+- {\r
+- ShapeAnalysis_CheckSmallFace csm;\r
+-\r
+- csm.SetTolerance (1e-6);\r
+-\r
+- TopTools_DataMapOfShapeListOfShape mapEdges;\r
+- ShapeAnalysis_DataMapOfShapeListOfReal mapParam;\r
+- TopoDS_Compound theAllVert;\r
+-\r
+- int spotfaces = 0;\r
+- int stripsupportfaces = 0;\r
+- int singlestripfaces = 0;\r
+- int stripfaces = 0;\r
+- int facessplitbyvertices = 0;\r
+- int stretchedpinfaces = 0;\r
+- int smoothpinfaces = 0;\r
+- int twistedfaces = 0;\r
+- // int edgessamebutnotidentified = 0;\r
+-\r
+- cout << "checking faces ... " << flush;\r
+-\r
+- int i;\r
+- for (i = 1; i <= fmap.Extent(); i++)\r
+- {\r
+- TopoDS_Face face = TopoDS::Face (fmap(i));\r
+- TopoDS_Edge e1, e2;\r
+-\r
+- if (csm.CheckSpotFace (face))\r
+- {\r
+- if (!spotfaces++)\r
+- str << "SpotFace {Spot face} ";\r
+-\r
+- (*testout) << "Face " << i << " is a spot face" << endl;\r
+- str << "SpotFace/Face" << i << " ";\r
+- str << "{Face " << i << " } ";\r
+- }\r
+-\r
+- if (csm.IsStripSupport (face))\r
+- {\r
+- if (!stripsupportfaces++)\r
+- str << "StripSupportFace {Strip support face} ";\r
+-\r
+- (*testout) << "Face " << i << " has strip support" << endl;\r
+- str << "StripSupportFace/Face" << i << " ";\r
+- str << "{Face " << i << " } ";\r
+- }\r
+-\r
+- if (csm.CheckSingleStrip(face, e1, e2))\r
+- {\r
+- if (!singlestripfaces++)\r
+- str << "SingleStripFace {Single strip face} ";\r
+-\r
+- (*testout) << "Face " << i << " is a single strip (edge " << emap.FindIndex(e1)\r
+- << " and edge " << emap.FindIndex(e2) << " are identical)" << endl;\r
+- str << "SingleStripFace/Face" << i << " ";\r
+- str << "{Face " << i << " (edge " << emap.FindIndex(e1)\r
+- << " and edge " << emap.FindIndex(e2) << " are identical)} ";\r
+- }\r
+-\r
+- if (csm.CheckStripFace(face, e1, e2))\r
+- {\r
+- if (!stripfaces++)\r
+- str << "StripFace {Strip face} ";\r
+-\r
+- (*testout) << "Face " << i << " is a strip (edge " << emap.FindIndex(e1)\r
+- << " and edge " << emap.FindIndex(e2)\r
+- << " are identical)" << endl;\r
+- str << "StripFace/Face" << i << " ";\r
+- str << "{Face " << i << " (edge " << emap.FindIndex(e1)\r
+- << " and edge " << emap.FindIndex(e2) << " are identical)} ";\r
+- }\r
+-\r
+- if (int count = csm.CheckSplittingVertices(face, mapEdges, mapParam, theAllVert))\r
+- {\r
+- if (!facessplitbyvertices++)\r
+- str << "FaceSplitByVertices {Face split by vertices} ";\r
+-\r
+- (*testout) << "Face " << i << " is split by " << count\r
+- << " vertex/vertices " << endl;\r
+- str << "FaceSplitByVertices/Face" << i << " ";\r
+- str << "{Face " << i << " (split by " << count << "vertex/vertices)} ";\r
+- }\r
+-\r
+- int whatrow, sens;\r
+- if (int type = csm.CheckPin (face, whatrow, sens))\r
+- {\r
+- if (type == 1)\r
+- {\r
+- if (!smoothpinfaces++)\r
+- str << "SmoothPinFace {Smooth pin face} ";\r
+-\r
+- (*testout) << "Face " << i << " is a smooth pin" << endl;\r
+- str << "SmoothPinFace/Face" << i << " ";\r
+- str << "{Face " << i << " } ";\r
+- }\r
+- else\r
+- {\r
+- if (!stretchedpinfaces++)\r
+- str << "StretchedPinFace {Stretched pin face} ";\r
+-\r
+- (*testout) << "Face " << i << " is a streched pin" << endl;\r
+- str << "StretchedPinFace/Face" << i << " ";\r
+- str << "{Face " << i << " } ";\r
+- }\r
+- }\r
+-\r
+- double paramu, paramv;\r
+- if (csm.CheckTwisted (face, paramu, paramv))\r
+- {\r
+- if (!twistedfaces++)\r
+- str << "TwistedFace {Twisted face} ";\r
+-\r
+- (*testout) << "Face " << i << " is twisted" << endl;\r
+- str << "TwistedFace/Face" << i << " ";\r
+- str << "{Face " << i << " } ";\r
+- }\r
+- }\r
+-\r
+- cout << "done" << endl;\r
+- cout << "checking edges ... " << flush;\r
+-\r
+- // double dmax;\r
+- // int cnt = 0;\r
+- Array <double> edgeLengths;\r
+- Array <int> order;\r
+- edgeLengths.SetSize (emap.Extent());\r
+- order.SetSize (emap.Extent());\r
+-\r
+- for (i = 1; i <= emap.Extent(); i++)\r
+- {\r
+- TopoDS_Edge edge1 = TopoDS::Edge (emap(i));\r
+- GProp_GProps system;\r
+- BRepGProp::LinearProperties(edge1, system);\r
+- edgeLengths[i-1] = system.Mass();\r
+- }\r
+-\r
+- Sort (edgeLengths, order);\r
+-\r
+- str << "ShortestEdges {Shortest edges} ";\r
+- for (i = 1; i <= min(20, emap.Extent()); i++)\r
+- {\r
+- str << "ShortestEdges/Edge" << i;\r
+- str << " {Edge " << order[i-1] << " (L=" << edgeLengths[order[i-1]-1] << ")} ";\r
+- }\r
+-\r
+- str << flush;\r
+-\r
+- cout << "done" << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: GetUnmeshedFaceInfo (stringstream & str)\r
+- {\r
+- for (int i = 1; i <= fmap.Extent(); i++)\r
+- {\r
+- if (facemeshstatus[i-1] == -1)\r
+- str << "Face" << i << " {Face " << i << " } ";\r
+- }\r
+- str << flush;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCGeometry :: GetNotDrawableFaces (stringstream & str)\r
+- {\r
+- for (int i = 1; i <= fmap.Extent(); i++)\r
+- {\r
+- if (!fvispar[i-1].IsDrawable())\r
+- str << "Face" << i << " {Face " << i << " } ";\r
+- }\r
+- str << flush;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- bool OCCGeometry :: ErrorInSurfaceMeshing ()\r
+- {\r
+- for (int i = 1; i <= fmap.Extent(); i++)\r
+- if (facemeshstatus[i-1] == -1)\r
+- return true;\r
+-\r
+- return false;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- int OCCGeometry :: GenerateMesh (Mesh*& mesh, MeshingParameters & mparam,\r
+- int perfstepsstart, int perfstepsend)\r
+- {\r
+- return OCCGenerateMesh (*this, mesh, mparam, perfstepsstart, perfstepsend);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- const Refinement & OCCGeometry :: GetRefinement () const\r
+- {\r
+- return * new OCCRefinementSurfaces (*this);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- OCCParameters :: OCCParameters()\r
+- {\r
+- resthcloseedgefac = 1;\r
+- resthcloseedgeenable = 1;\r
+- resthminedgelen = 0.001;\r
+- resthminedgelenenable = 1;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void OCCParameters :: Print(ostream & ost) const\r
+- {\r
+- ost << "OCC Parameters:" << endl\r
+- << "close edges: " << resthcloseedgeenable\r
+- << ", fac = " << resthcloseedgefac << endl\r
+- << "minimum edge length: " << resthminedgelenenable\r
+- << ", min len = " << resthminedgelen << endl;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- OCCParameters occparam;\r
+-\r
+-}\r
+-\r
+-\r
+-#endif\r
++
++#ifdef OCCGEOMETRY
++
++#include <mystdlib.h>
++#include <occgeom.hpp>
++#include "ShapeAnalysis_ShapeTolerance.hxx"
++#include "ShapeAnalysis_ShapeContents.hxx"
++#include "ShapeAnalysis_CheckSmallFace.hxx"
++#include "ShapeAnalysis_DataMapOfShapeListOfReal.hxx"
++#include "ShapeAnalysis_Surface.hxx"
++#include <BRepTopAdaptor_FClass2d.hxx> // -- to optimize Project() and FastProject()
++#include <TopAbs_State.hxx>
++#include "BRepAlgoAPI_Fuse.hxx"
++#include "BRepCheck_Analyzer.hxx"
++#include "BRepLib.hxx"
++#include "ShapeBuild_ReShape.hxx"
++#include "ShapeFix.hxx"
++#include "ShapeFix_FixSmallFace.hxx"
++#include "Partition_Spliter.hxx"
++
++namespace netgen
++{
++ // free data used to optimize Project() and FastProject()
++ OCCGeometry::~OCCGeometry()
++ {
++ NCollection_DataMap<int,BRepTopAdaptor_FClass2d*>::Iterator it(fclsmap);
++ for (; it.More(); it.Next())
++ delete it.Value();
++ }
++
++ void OCCGeometry :: PrintNrShapes ()
++ {
++ TopExp_Explorer e;
++ int count = 0;
++ for (e.Init(shape, TopAbs_COMPSOLID); e.More(); e.Next()) count++;
++ cout << "CompSolids: " << count << endl;
++
++ cout << "Solids : " << somap.Extent() << endl;
++ cout << "Shells : " << shmap.Extent() << endl;
++ cout << "Faces : " << fmap.Extent() << endl;
++ cout << "Edges : " << emap.Extent() << endl;
++ cout << "Vertices : " << vmap.Extent() << endl;
++ }
++
++
++
++
++ void PrintContents (OCCGeometry * geom)
++ {
++ ShapeAnalysis_ShapeContents cont;
++ cont.Clear();
++ cont.Perform(geom->shape);
++
++ (*testout) << "OCC CONTENTS" << endl;
++ (*testout) << "============" << endl;
++ (*testout) << "SOLIDS : " << cont.NbSolids() << endl;
++ (*testout) << "SHELLS : " << cont.NbShells() << endl;
++ (*testout) << "FACES : " << cont.NbFaces() << endl;
++ (*testout) << "WIRES : " << cont.NbWires() << endl;
++ (*testout) << "EDGES : " << cont.NbEdges() << endl;
++ (*testout) << "VERTICES : " << cont.NbVertices() << endl;
++
++ TopExp_Explorer e;
++ int count = 0;
++ for (e.Init(geom->shape, TopAbs_COMPOUND); e.More(); e.Next())
++ count++;
++ (*testout) << "Compounds: " << count << endl;
++
++ count = 0;
++ for (e.Init(geom->shape, TopAbs_COMPSOLID); e.More(); e.Next())
++ count++;
++ (*testout) << "CompSolids: " << count << endl;
++
++ (*testout) << endl;
++
++ cout << "Highest entry in topology hierarchy: " << endl;
++ if (count)
++ cout << count << " composite solid(s)" << endl;
++ else
++ if (geom->somap.Extent())
++ cout << geom->somap.Extent() << " solid(s)" << endl;
++ else
++ if (geom->shmap.Extent())
++ cout << geom->shmap.Extent() << " shells(s)" << endl;
++ else
++ if (geom->fmap.Extent())
++ cout << geom->fmap.Extent() << " face(s)" << endl;
++ else
++ if (geom->wmap.Extent())
++ cout << geom->wmap.Extent() << " wire(s)" << endl;
++ else
++ if (geom->emap.Extent())
++ cout << geom->emap.Extent() << " edge(s)" << endl;
++ else
++ if (geom->vmap.Extent())
++ cout << geom->vmap.Extent() << " vertices(s)" << endl;
++ else
++ cout << "no entities" << endl;
++
++ }
++
++
++
++ void OCCGeometry :: HealGeometry ()
++ {
++ int nrc = 0, nrcs = 0,
++ nrso = somap.Extent(),
++ nrsh = shmap.Extent(),
++ nrf = fmap.Extent(),
++ nrw = wmap.Extent(),
++ nre = emap.Extent(),
++ nrv = vmap.Extent();
++
++ TopExp_Explorer exp0;
++ TopExp_Explorer exp1;
++
++
++ for (exp0.Init(shape, TopAbs_COMPOUND); exp0.More(); exp0.Next()) nrc++;
++ for (exp0.Init(shape, TopAbs_COMPSOLID); exp0.More(); exp0.Next()) nrcs++;
++
++ double surfacecont = 0;
++
++ {
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ rebuild->Remove(edge);
++ }
++ shape = rebuild->Apply(shape);
++ }
++
++ BuildFMap();
++
++
++ for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp0.Current());
++
++ GProp_GProps system;
++ BRepGProp::SurfaceProperties(face, system);
++ surfacecont += system.Mass();
++ }
++
++
++ cout << "Starting geometry healing procedure (tolerance: " << tolerance << ")" << endl
++ << "-----------------------------------" << endl;
++
++ {
++ cout << endl << "- repairing faces" << endl;
++
++ Handle(ShapeFix_Face) sff;
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++
++
++ for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())
++ {
++ // Variable to hold the colour (if there exists one) of
++ // the current face being processed
++ Quantity_Color face_colour;
++
++ TopoDS_Face face = TopoDS::Face (exp0.Current());
++
++ if(face_colours.IsNull()
++ || (!(face_colours->GetColor(face,XCAFDoc_ColorSurf,face_colour))))
++ {
++ // Set the default face colour to green (Netgen Standard)
++ // if no colour has been defined for the face
++ face_colour = Quantity_Color(0.0,1.0,0.0,Quantity_TOC_RGB);
++ }
++
++ sff = new ShapeFix_Face (face);
++ sff->FixAddNaturalBoundMode() = Standard_True;
++ sff->FixSmallAreaWireMode() = Standard_True;
++ sff->Perform();
++
++ if(sff->Status(ShapeExtend_DONE1) ||
++ sff->Status(ShapeExtend_DONE2) ||
++ sff->Status(ShapeExtend_DONE3) ||
++ sff->Status(ShapeExtend_DONE4) ||
++ sff->Status(ShapeExtend_DONE5))
++ {
++ cout << "repaired face " << fmap.FindIndex(face) << " ";
++ if(sff->Status(ShapeExtend_DONE1))
++ cout << "(some wires are fixed)" <<endl;
++ else if(sff->Status(ShapeExtend_DONE2))
++ cout << "(orientation of wires fixed)" <<endl;
++ else if(sff->Status(ShapeExtend_DONE3))
++ cout << "(missing seam added)" <<endl;
++ else if(sff->Status(ShapeExtend_DONE4))
++ cout << "(small area wire removed)" <<endl;
++ else if(sff->Status(ShapeExtend_DONE5))
++ cout << "(natural bounds added)" <<endl;
++ TopoDS_Face newface = sff->Face();
++
++ rebuild->Replace(face, newface);
++ }
++
++ // Set the original colour of the face to the newly created
++ // face (after the healing process)
++ face = TopoDS::Face (exp0.Current());
++ face_colours->SetColor(face,face_colour,XCAFDoc_ColorSurf);
++ }
++ shape = rebuild->Apply(shape);
++ }
++
++
++ {
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ rebuild->Remove(edge);
++ }
++ shape = rebuild->Apply(shape);
++ }
++
++
++ if (fixsmalledges)
++ {
++ cout << endl << "- fixing small edges" << endl;
++
++ Handle(ShapeFix_Wire) sfw;
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++
++
++ for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp0.Current());
++
++ for (exp1.Init (face, TopAbs_WIRE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Wire oldwire = TopoDS::Wire(exp1.Current());
++ sfw = new ShapeFix_Wire (oldwire, face ,tolerance);
++ sfw->ModifyTopologyMode() = Standard_True;
++
++ sfw->ClosedWireMode() = Standard_True;
++
++ bool replace = false;
++
++ replace = sfw->FixReorder() || replace;
++
++ replace = sfw->FixConnected() || replace;
++
++
++
++ if (sfw->FixSmall (Standard_False, tolerance) && ! (sfw->StatusSmall(ShapeExtend_FAIL1) ||
++ sfw->StatusSmall(ShapeExtend_FAIL2) ||
++ sfw->StatusSmall(ShapeExtend_FAIL3)))
++ {
++ cout << "Fixed small edge in wire " << wmap.FindIndex (oldwire) << endl;
++ replace = true;
++
++ }
++ else if (sfw->StatusSmall(ShapeExtend_FAIL1))
++ cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)
++ << ", edge cannot be checked (no 3d curve and no pcurve)" << endl;
++ else if (sfw->StatusSmall(ShapeExtend_FAIL2))
++ cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)
++ << ", edge is null-length and has different vertives at begin and end, and lockvtx is True or ModifiyTopologyMode is False" << endl;
++ else if (sfw->StatusSmall(ShapeExtend_FAIL3))
++ cerr << "Failed to fix small edge in wire " << wmap.FindIndex (oldwire)
++ << ", CheckConnected has failed" << endl;
++
++ replace = sfw->FixEdgeCurves() || replace;
++
++ replace = sfw->FixDegenerated() || replace;
++
++ replace = sfw->FixSelfIntersection() || replace;
++
++ replace = sfw->FixLacking(Standard_True) || replace;
++
++ if(replace)
++ {
++ TopoDS_Wire newwire = sfw->Wire();
++ rebuild->Replace(oldwire, newwire);
++ }
++
++ //delete sfw; sfw = NULL;
++
++ }
++ }
++
++ shape = rebuild->Apply(shape);
++
++
++
++ {
++ BuildFMap();
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if (vmap.FindIndex(TopExp::FirstVertex (edge)) ==
++ vmap.FindIndex(TopExp::LastVertex (edge)))
++ {
++ GProp_GProps system;
++ BRepGProp::LinearProperties(edge, system);
++ if (system.Mass() < tolerance)
++ {
++ cout << "removing degenerated edge " << emap.FindIndex(edge)
++ << " from vertex " << vmap.FindIndex(TopExp::FirstVertex (edge))
++ << " to vertex " << vmap.FindIndex(TopExp::LastVertex (edge)) << endl;
++ rebuild->Remove(edge);
++ }
++ }
++ }
++ shape = rebuild->Apply(shape);
++
++ //delete rebuild; rebuild = NULL;
++ }
++
++
++
++ {
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ rebuild->Remove(edge);
++ }
++ shape = rebuild->Apply(shape);
++ }
++
++
++
++
++ Handle(ShapeFix_Wireframe) sfwf = new ShapeFix_Wireframe;
++ sfwf->SetPrecision(tolerance);
++ sfwf->Load (shape);
++ sfwf->ModeDropSmallEdges() = Standard_True;
++
++ sfwf->SetPrecision(boundingbox.Diam());
++
++ if (sfwf->FixWireGaps())
++ {
++ cout << endl << "- fixing wire gaps" << endl;
++ if (sfwf->StatusWireGaps(ShapeExtend_OK)) cout << "no gaps found" << endl;
++ if (sfwf->StatusWireGaps(ShapeExtend_DONE1)) cout << "some 2D gaps fixed" << endl;
++ if (sfwf->StatusWireGaps(ShapeExtend_DONE2)) cout << "some 3D gaps fixed" << endl;
++ if (sfwf->StatusWireGaps(ShapeExtend_FAIL1)) cout << "failed to fix some 2D gaps" << endl;
++ if (sfwf->StatusWireGaps(ShapeExtend_FAIL2)) cout << "failed to fix some 3D gaps" << endl;
++ }
++
++ sfwf->SetPrecision(tolerance);
++
++
++ {
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ cout << "degenerated edge at position 4" << endl;
++ }
++ }
++
++
++
++ if (sfwf->FixSmallEdges())
++ {
++ cout << endl << "- fixing wire frames" << endl;
++ if (sfwf->StatusSmallEdges(ShapeExtend_OK)) cout << "no small edges found" << endl;
++ if (sfwf->StatusSmallEdges(ShapeExtend_DONE1)) cout << "some small edges fixed" << endl;
++ if (sfwf->StatusSmallEdges(ShapeExtend_FAIL1)) cout << "failed to fix some small edges" << endl;
++ }
++
++
++
++ shape = sfwf->Shape();
++
++ //delete sfwf; sfwf = NULL;
++ //delete rebuild; rebuild = NULL;
++
++ }
++
++
++
++
++
++ {
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ cout << "degenerated edge at position 5" << endl;
++ }
++ }
++
++
++
++
++ if (fixspotstripfaces)
++ {
++
++ cout << endl << "- fixing spot and strip faces" << endl;
++ Handle(ShapeFix_FixSmallFace) sffsm = new ShapeFix_FixSmallFace();
++ sffsm -> Init (shape);
++ sffsm -> SetPrecision (tolerance);
++ sffsm -> Perform();
++
++ shape = sffsm -> FixShape();
++ //delete sffsm; sffsm = NULL;
++ }
++
++
++ {
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ cout << "degenerated edge at position 6" << endl;
++ }
++ }
++
++
++
++ if (sewfaces)
++ {
++ cout << endl << "- sewing faces" << endl;
++
++ BRepOffsetAPI_Sewing sewedObj(tolerance);
++
++ for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())
++ {
++ TopoDS_Face face = TopoDS::Face (exp0.Current());
++ sewedObj.Add (face);
++ }
++
++ sewedObj.Perform();
++
++ if (!sewedObj.SewedShape().IsNull())
++ shape = sewedObj.SewedShape();
++ else
++ cout << " not possible";
++ }
++
++
++
++ {
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(shape);
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ rebuild->Remove(edge);
++ }
++ shape = rebuild->Apply(shape);
++ }
++
++
++ if (makesolids)
++ {
++ cout << endl << "- making solids" << endl;
++
++ BRepBuilderAPI_MakeSolid ms;
++ int count = 0;
++ for (exp0.Init(shape, TopAbs_SHELL); exp0.More(); exp0.Next())
++ {
++ count++;
++ ms.Add (TopoDS::Shell(exp0.Current()));
++ }
++
++ if (!count)
++ {
++ cout << " not possible (no shells)" << endl;
++ }
++ else
++ {
++ BRepCheck_Analyzer ba(ms);
++ if (ba.IsValid ())
++ {
++ Handle(ShapeFix_Shape) sfs = new ShapeFix_Shape;
++ sfs->Init (ms);
++ sfs->SetPrecision(tolerance);
++ sfs->SetMaxTolerance(tolerance);
++ sfs->Perform();
++ shape = sfs->Shape();
++
++ for (exp0.Init(shape, TopAbs_SOLID); exp0.More(); exp0.Next())
++ {
++ TopoDS_Solid solid = TopoDS::Solid(exp0.Current());
++ TopoDS_Solid newsolid = solid;
++ BRepLib::OrientClosedSolid (newsolid);
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ // rebuild->Apply(shape);
++ rebuild->Replace(solid, newsolid);
++ TopoDS_Shape newshape = rebuild->Apply(shape, TopAbs_COMPSOLID);//, 1);
++ // TopoDS_Shape newshape = rebuild->Apply(shape);
++ shape = newshape;
++ }
++
++ //delete sfs; sfs = NULL;
++ }
++ else
++ cout << " not possible" << endl;
++ }
++ }
++
++
++
++ if (splitpartitions)
++ {
++ cout << "- running SALOME partition splitter" << endl;
++
++ TopExp_Explorer e2;
++ Partition_Spliter ps;
++ int count = 0;
++
++ for (e2.Init (shape, TopAbs_SOLID);
++ e2.More(); e2.Next())
++ {
++ count++;
++ ps.AddShape (e2.Current());
++ }
++
++ ps.Compute();
++ shape = ps.Shape();
++
++ cout << " before: " << count << " solids" << endl;
++
++ count = 0;
++ for (e2.Init (shape, TopAbs_SOLID);
++ e2.More(); e2.Next()) count++;
++
++ cout << " after : " << count << " solids" << endl;
++ }
++
++ BuildFMap();
++
++
++
++ {
++ for (exp1.Init (shape, TopAbs_EDGE); exp1.More(); exp1.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp1.Current());
++ if ( BRep_Tool::Degenerated(edge) )
++ cout << "degenerated edge at position 8" << endl;
++ }
++ }
++
++
++ double newsurfacecont = 0;
++
++
++ for (exp0.Init (shape, TopAbs_FACE); exp0.More(); exp0.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp0.Current());
++ GProp_GProps system;
++ BRepGProp::SurfaceProperties(face, system);
++ newsurfacecont += system.Mass();
++ }
++
++
++ int nnrc = 0, nnrcs = 0,
++ nnrso = somap.Extent(),
++ nnrsh = shmap.Extent(),
++ nnrf = fmap.Extent(),
++ nnrw = wmap.Extent(),
++ nnre = emap.Extent(),
++ nnrv = vmap.Extent();
++
++ for (exp0.Init(shape, TopAbs_COMPOUND); exp0.More(); exp0.Next()) nnrc++;
++ for (exp0.Init(shape, TopAbs_COMPSOLID); exp0.More(); exp0.Next()) nnrcs++;
++
++ cout << "-----------------------------------" << endl;
++ cout << "Compounds : " << nnrc << " (" << nrc << ")" << endl;
++ cout << "Composite solids: " << nnrcs << " (" << nrcs << ")" << endl;
++ cout << "Solids : " << nnrso << " (" << nrso << ")" << endl;
++ cout << "Shells : " << nnrsh << " (" << nrsh << ")" << endl;
++ cout << "Wires : " << nnrw << " (" << nrw << ")" << endl;
++ cout << "Faces : " << nnrf << " (" << nrf << ")" << endl;
++ cout << "Edges : " << nnre << " (" << nre << ")" << endl;
++ cout << "Vertices : " << nnrv << " (" << nrv << ")" << endl;
++ cout << endl;
++ cout << "Totol surface area : " << newsurfacecont << " (" << surfacecont << ")" << endl;
++ cout << endl;
++ }
++
++
++
++
++ void OCCGeometry :: BuildFMap()
++ {
++ somap.Clear();
++ shmap.Clear();
++ fmap.Clear();
++ wmap.Clear();
++ emap.Clear();
++ vmap.Clear();
++
++ TopExp_Explorer exp0, exp1, exp2, exp3, exp4, exp5;
++
++ for (exp0.Init(shape, TopAbs_COMPOUND);
++ exp0.More(); exp0.Next())
++ {
++ TopoDS_Compound compound = TopoDS::Compound (exp0.Current());
++ (*testout) << "compound" << endl;
++ int i = 0;
++ for (exp1.Init(compound, TopAbs_SHELL);
++ exp1.More(); exp1.Next())
++ {
++ (*testout) << "shell " << ++i << endl;
++ }
++ }
++
++ for (exp0.Init(shape, TopAbs_SOLID);
++ exp0.More(); exp0.Next())
++ {
++ TopoDS_Solid solid = TopoDS::Solid (exp0.Current());
++
++ if (somap.FindIndex(solid) < 1)
++ {
++ somap.Add (solid);
++
++ for (exp1.Init(solid, TopAbs_SHELL);
++ exp1.More(); exp1.Next())
++ {
++ TopoDS_Shell shell = TopoDS::Shell (exp1.Current());
++ if (shmap.FindIndex(shell) < 1)
++ {
++ shmap.Add (shell);
++
++ for (exp2.Init(shell, TopAbs_FACE);
++ exp2.More(); exp2.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp2.Current());
++ if (fmap.FindIndex(face) < 1)
++ {
++ fmap.Add (face);
++ (*testout) << "face " << fmap.FindIndex(face) << " ";
++ (*testout) << ((face.Orientation() == TopAbs_REVERSED) ? "-" : "+") << ", ";
++ (*testout) << ((exp2.Current().Orientation() == TopAbs_REVERSED) ? "-" : "+") << endl;
++ for (exp3.Init(exp2.Current(), TopAbs_WIRE);
++ exp3.More(); exp3.Next())
++ {
++ TopoDS_Wire wire = TopoDS::Wire (exp3.Current());
++ if (wmap.FindIndex(wire) < 1)
++ {
++ wmap.Add (wire);
++
++ for (exp4.Init(exp3.Current(), TopAbs_EDGE);
++ exp4.More(); exp4.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp4.Current());
++ if (emap.FindIndex(edge) < 1)
++ {
++ emap.Add (edge);
++ for (exp5.Init(exp4.Current(), TopAbs_VERTEX);
++ exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++
++ // Free Shells
++ for (exp1.Init(shape, TopAbs_SHELL, TopAbs_SOLID); exp1.More(); exp1.Next())
++ {
++ TopoDS_Shell shell = TopoDS::Shell(exp1.Current());
++ if (shmap.FindIndex(shell) < 1)
++ {
++ shmap.Add (shell);
++
++ (*testout) << "shell " << shmap.FindIndex(shell) << " ";
++ (*testout) << ((shell.Orientation() == TopAbs_REVERSED) ? "-" : "+") << ", ";
++ (*testout) << ((exp1.Current().Orientation() == TopAbs_REVERSED) ? "-" : "+") << endl;
++
++ for (exp2.Init(shell, TopAbs_FACE); exp2.More(); exp2.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp2.Current());
++ if (fmap.FindIndex(face) < 1)
++ {
++ fmap.Add (face);
++
++ for (exp3.Init(face, TopAbs_WIRE); exp3.More(); exp3.Next())
++ {
++ TopoDS_Wire wire = TopoDS::Wire (exp3.Current());
++ if (wmap.FindIndex(wire) < 1)
++ {
++ wmap.Add (wire);
++
++ for (exp4.Init(wire, TopAbs_EDGE); exp4.More(); exp4.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp4.Current());
++ if (emap.FindIndex(edge) < 1)
++ {
++ emap.Add (edge);
++ for (exp5.Init(edge, TopAbs_VERTEX); exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++
++
++ // Free Faces
++
++ for (exp2.Init(shape, TopAbs_FACE, TopAbs_SHELL); exp2.More(); exp2.Next())
++ {
++ TopoDS_Face face = TopoDS::Face(exp2.Current());
++ if (fmap.FindIndex(face) < 1)
++ {
++ fmap.Add (face);
++
++ for (exp3.Init(exp2.Current(), TopAbs_WIRE); exp3.More(); exp3.Next())
++ {
++ TopoDS_Wire wire = TopoDS::Wire (exp3.Current());
++ if (wmap.FindIndex(wire) < 1)
++ {
++ wmap.Add (wire);
++
++ for (exp4.Init(exp3.Current(), TopAbs_EDGE); exp4.More(); exp4.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp4.Current());
++ if (emap.FindIndex(edge) < 1)
++ {
++ emap.Add (edge);
++ for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++ }
++ }
++ }
++ }
++ }
++ }
++
++
++ // Free Wires
++
++ for (exp3.Init(shape, TopAbs_WIRE, TopAbs_FACE); exp3.More(); exp3.Next())
++ {
++ TopoDS_Wire wire = TopoDS::Wire (exp3.Current());
++ if (wmap.FindIndex(wire) < 1)
++ {
++ wmap.Add (wire);
++
++ for (exp4.Init(exp3.Current(), TopAbs_EDGE); exp4.More(); exp4.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp4.Current());
++ if (emap.FindIndex(edge) < 1)
++ {
++ emap.Add (edge);
++ for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++ }
++ }
++ }
++ }
++
++
++ // Free Edges
++
++ for (exp4.Init(shape, TopAbs_EDGE, TopAbs_WIRE); exp4.More(); exp4.Next())
++ {
++ TopoDS_Edge edge = TopoDS::Edge(exp4.Current());
++ if (emap.FindIndex(edge) < 1)
++ {
++ emap.Add (edge);
++ for (exp5.Init(exp4.Current(), TopAbs_VERTEX); exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++ }
++ }
++
++
++ // Free Vertices
++
++ for (exp5.Init(shape, TopAbs_VERTEX, TopAbs_EDGE); exp5.More(); exp5.Next())
++ {
++ TopoDS_Vertex vertex = TopoDS::Vertex(exp5.Current());
++ if (vmap.FindIndex(vertex) < 1)
++ vmap.Add (vertex);
++ }
++
++
++
++
++ facemeshstatus.DeleteAll();
++ facemeshstatus.SetSize (fmap.Extent());
++ facemeshstatus = 0;
++
++ // Philippose - 15/01/2009
++ face_maxh.DeleteAll();
++ face_maxh.SetSize (fmap.Extent());
++ face_maxh = mparam.maxh;
++
++ // Philippose - 15/01/2010
++ face_maxh_modified.DeleteAll();
++ face_maxh_modified.SetSize(fmap.Extent());
++ face_maxh_modified = 0;
++
++
++ // Philippose - 17/01/2009
++ face_sel_status.DeleteAll();
++ face_sel_status.SetSize (fmap.Extent());
++ face_sel_status = 0;
++
++ fvispar.SetSize (fmap.Extent());
++ evispar.SetSize (emap.Extent());
++ vvispar.SetSize (vmap.Extent());
++
++ fsingular.SetSize (fmap.Extent());
++ esingular.SetSize (emap.Extent());
++ vsingular.SetSize (vmap.Extent());
++
++ fsingular = esingular = vsingular = false;
++ }
++
++
++
++ void OCCGeometry :: SewFaces ()
++ {
++ (*testout) << "Trying to sew faces ..." << endl;
++ cout << "Trying to sew faces ..." << flush;
++
++ BRepOffsetAPI_Sewing sewedObj(1);
++
++ for (int i = 1; i <= fmap.Extent(); i++)
++ {
++ TopoDS_Face face = TopoDS::Face (fmap(i));
++ sewedObj.Add (face);
++ }
++
++ sewedObj.Perform();
++
++ if (!sewedObj.SewedShape().IsNull())
++ {
++ shape = sewedObj.SewedShape();
++ cout << " done" << endl;
++ }
++ else
++ cout << " not possible";
++ }
++
++
++
++
++
++ void OCCGeometry :: MakeSolid ()
++ {
++ TopExp_Explorer exp0;
++
++ (*testout) << "Trying to build solids ..." << endl;
++ cout << "Trying to build solids ..." << flush;
++
++ BRepBuilderAPI_MakeSolid ms;
++ int count = 0;
++ for (exp0.Init(shape, TopAbs_SHELL); exp0.More(); exp0.Next())
++ {
++ count++;
++ ms.Add (TopoDS::Shell(exp0.Current()));
++ }
++
++ if (!count)
++ {
++ cout << " not possible (no shells)" << endl;
++ return;
++ }
++
++ BRepCheck_Analyzer ba(ms);
++ if (ba.IsValid ())
++ {
++ Handle(ShapeFix_Shape) sfs = new ShapeFix_Shape;
++ sfs->Init (ms);
++
++ sfs->SetPrecision(1e-5);
++ sfs->SetMaxTolerance(1e-5);
++
++ sfs->Perform();
++
++ shape = sfs->Shape();
++
++ for (exp0.Init(shape, TopAbs_SOLID); exp0.More(); exp0.Next())
++ {
++ TopoDS_Solid solid = TopoDS::Solid(exp0.Current());
++ TopoDS_Solid newsolid = solid;
++ BRepLib::OrientClosedSolid (newsolid);
++ Handle(ShapeBuild_ReShape) rebuild = new ShapeBuild_ReShape;
++ rebuild->Replace(solid, newsolid);
++
++ TopoDS_Shape newshape = rebuild->Apply(shape, TopAbs_SHAPE, 1);
++ shape = newshape;
++ }
++
++ cout << " done" << endl;
++ }
++ else
++ cout << " not possible" << endl;
++ }
++
++
++
++
++ void OCCGeometry :: BuildVisualizationMesh (double deflection)
++ {
++ cout << "Preparing visualization (deflection = " << deflection << ") ... " << flush;
++
++ BRepTools::Clean (shape);
++ // BRepMesh_IncrementalMesh::
++ BRepMesh_IncrementalMesh (shape, deflection, true);
++ cout << "done" << endl;
++ }
++
++
++
++
++ void OCCGeometry :: CalcBoundingBox ()
++ {
++ Bnd_Box bb;
++ BRepBndLib::Add (shape, bb);
++
++ double x1,y1,z1,x2,y2,z2;
++ bb.Get (x1,y1,z1,x2,y2,z2);
++ Point<3> p1 = Point<3> (x1,y1,z1);
++ Point<3> p2 = Point<3> (x2,y2,z2);
++
++ (*testout) << "Bounding Box = [" << p1 << " - " << p2 << "]" << endl;
++ boundingbox = Box<3> (p1,p2);
++ SetCenter();
++ }
++
++
++ // returns a projector and a classifier for the given surface
++ void OCCGeometry::GetFaceTools(int surfi, Handle(ShapeAnalysis_Surface)& proj,
++ BRepTopAdaptor_FClass2d*& cls) const
++ {
++ //MSV: organize caching projector in the map
++ if (fprjmap.IsBound(surfi))
++ {
++ proj = fprjmap.Find(surfi);
++ cls = fclsmap.Find(surfi);
++ }
++ else
++ {
++ const TopoDS_Face& aFace = TopoDS::Face(fmap(surfi));
++ Handle(Geom_Surface) aSurf = BRep_Tool::Surface(aFace);
++ proj = new ShapeAnalysis_Surface(aSurf);
++ fprjmap.Bind(surfi, proj);
++ cls = new BRepTopAdaptor_FClass2d(aFace,Precision::Confusion());
++ fclsmap.Bind(surfi, cls);
++ }
++ }
++
++ // void OCCGeometry :: Project (int surfi, Point<3> & p) const
++ bool OCCGeometry :: Project (int surfi, Point<3> & p, double& u, double& v) const
++ {
++ static int cnt = 0;
++ if (++cnt % 1000 == 0) cout << "Project cnt = " << cnt << endl;
++
++ gp_Pnt pnt(p(0), p(1), p(2));
++
++ // -- Optimization: use cached projector and classifier
++ // double u,v;
++ // Handle( Geom_Surface ) thesurf = BRep_Tool::Surface(TopoDS::Face(fmap(surfi)));
++ // Handle( ShapeAnalysis_Surface ) su = new ShapeAnalysis_Surface( thesurf );
++ // gp_Pnt2d suval = su->ValueOfUV ( pnt, BRep_Tool::Tolerance( TopoDS::Face(fmap(surfi)) ) );
++ // suval.Coord( u, v);
++ // pnt = thesurf->Value( u, v );
++
++ Handle(ShapeAnalysis_Surface) proj;
++ BRepTopAdaptor_FClass2d *cls;
++ GetFaceTools(surfi, proj, cls);
++
++ gp_Pnt2d p2d = proj->ValueOfUV(pnt, Precision::Confusion());
++ if (cls->Perform(p2d) == TopAbs_OUT)
++ {
++ return false;
++ }
++ pnt = proj->Value(p2d);
++ p2d.Coord(u, v);
++
++ p = Point<3> (pnt.X(), pnt.Y(), pnt.Z());
++
++ return true;
++ }
++
++
++
++
++ bool OCCGeometry :: FastProject (int surfi, Point<3> & ap, double& u, double& v) const
++ {
++ gp_Pnt p(ap(0), ap(1), ap(2));
++
++ // -- Optimization: use cached projector and classifier
++ // Handle(Geom_Surface) surface = BRep_Tool::Surface(TopoDS::Face(fmap(surfi)));
++ //
++ // gp_Pnt x = surface->Value (u,v);
++ //
++ // if (p.SquareDistance(x) <= sqr(PROJECTION_TOLERANCE)) return true;
++ //
++ // gp_Vec du, dv;
++ //
++ // surface->D1(u,v,x,du,dv);
++ //
++ // int count = 0;
++ //
++ // gp_Pnt xold;
++ // gp_Vec n;
++ // double det, lambda, mu;
++ //
++ // do {
++ // count++;
++ //
++ // n = du^dv;
++ //
++ // det = Det3 (n.X(), du.X(), dv.X(),
++ // n.Y(), du.Y(), dv.Y(),
++ // n.Z(), du.Z(), dv.Z());
++ //
++ // if (det < 1e-15) return false;
++ //
++ // lambda = Det3 (n.X(), p.X()-x.X(), dv.X(),
++ // n.Y(), p.Y()-x.Y(), dv.Y(),
++ // n.Z(), p.Z()-x.Z(), dv.Z())/det;
++ //
++ // mu = Det3 (n.X(), du.X(), p.X()-x.X(),
++ // n.Y(), du.Y(), p.Y()-x.Y(),
++ // n.Z(), du.Z(), p.Z()-x.Z())/det;
++ //
++ // u += lambda;
++ // v += mu;
++ //
++ // xold = x;
++ // surface->D1(u,v,x,du,dv);
++ //
++ // } while (xold.SquareDistance(x) > sqr(PROJECTION_TOLERANCE) && count < 50);
++ //
++ // // (*testout) << "FastProject count: " << count << endl;
++ //
++ // if (count == 50) return false;
++ //
++ // ap = Point<3> (x.X(), x.Y(), x.Z());
++ Handle(ShapeAnalysis_Surface) proj;
++ BRepTopAdaptor_FClass2d *cls;
++ GetFaceTools(surfi, proj, cls);
++
++ gp_Pnt2d p2d = proj->NextValueOfUV(gp_Pnt2d(u,v), p, Precision::Confusion());
++ if (cls->Perform(p2d) == TopAbs_OUT)
++ {
++ //cout << "Projection fails" << endl;
++ return false;
++ }
++
++ p = proj->Value(p2d);
++ p2d.Coord(u, v);
++ ap = Point<3> (p.X(), p.Y(), p.Z());
++
++ return true;
++ }
++
++
++
++
++ void OCCGeometry :: WriteOCC_STL(char * filename)
++ {
++ cout << "writing stl..."; cout.flush();
++ StlAPI_Writer writer;
++ //writer.RelativeMode() = Standard_False;
++
++ //writer.SetDeflection(0.02);
++ writer.Write(shape,filename);
++
++ cout << "done" << endl;
++ }
++
++
++
++ // Philippose - 23/02/2009
++ /* Special IGES File load function including the ability
++ to extract individual surface colours via the extended
++ OpenCascade XDE and XCAF Feature set.
++ */
++ OCCGeometry *LoadOCC_IGES(const char *filename)
++ {
++ OCCGeometry *occgeo;
++ occgeo = new OCCGeometry;
++
++ // Initiate a dummy XCAF Application to handle the IGES XCAF Document
++ static Handle(XCAFApp_Application) dummy_app = XCAFApp_Application::GetApplication();
++
++ // Create an XCAF Document to contain the IGES file itself
++ Handle(TDocStd_Document) iges_doc;
++
++ // Check if a IGES File is already open under this handle, if so, close it to prevent
++ // Segmentation Faults when trying to create a new document
++ if(dummy_app->NbDocuments() > 0)
++ {
++ dummy_app->GetDocument(1,iges_doc);
++ dummy_app->Close(iges_doc);
++ }
++ dummy_app->NewDocument ("IGES-XCAF",iges_doc);
++
++ IGESCAFControl_Reader reader;
++
++ Standard_Integer stat = reader.ReadFile((char*)filename);
++
++ if(stat != IFSelect_RetDone)
++ {
++ delete occgeo;
++ return NULL;
++ }
++
++ // Enable transfer of colours
++ reader.SetColorMode(Standard_True);
++
++ reader.Transfer(iges_doc);
++
++ // Read in the shape(s) and the colours present in the IGES File
++ Handle(XCAFDoc_ShapeTool) iges_shape_contents = XCAFDoc_DocumentTool::ShapeTool(iges_doc->Main());
++ Handle(XCAFDoc_ColorTool) iges_colour_contents = XCAFDoc_DocumentTool::ColorTool(iges_doc->Main());
++
++ TDF_LabelSequence iges_shapes;
++ iges_shape_contents->GetShapes(iges_shapes);
++
++ // List out the available colours in the IGES File as Colour Names
++ TDF_LabelSequence all_colours;
++ iges_colour_contents->GetColors(all_colours);
++ PrintMessage(1,"Number of colours in IGES File: ",all_colours.Length());
++ for(int i = 1; i <= all_colours.Length(); i++)
++ {
++ Quantity_Color col;
++ stringstream col_rgb;
++ iges_colour_contents->GetColor(all_colours.Value(i),col);
++ col_rgb << " : (" << col.Red() << "," << col.Green() << "," << col.Blue() << ")";
++ PrintMessage(1, "Colour [", i, "] = ",col.StringName(col.Name()),col_rgb.str());
++ }
++
++
++ // For the IGES Reader, all the shapes can be exported as one compund shape
++ // using the "OneShape" member
++ occgeo->shape = reader.OneShape();
++ occgeo->face_colours = iges_colour_contents;
++ occgeo->changed = 1;
++ occgeo->BuildFMap();
++
++ occgeo->CalcBoundingBox();
++ PrintContents (occgeo);
++
++ return occgeo;
++ }
++
++
++
++
++
++ // Philippose - 29/01/2009
++ /* Special STEP File load function including the ability
++ to extract individual surface colours via the extended
++ OpenCascade XDE and XCAF Feature set.
++ */
++ OCCGeometry * LoadOCC_STEP (const char * filename)
++ {
++ OCCGeometry * occgeo;
++ occgeo = new OCCGeometry;
++
++ // Initiate a dummy XCAF Application to handle the STEP XCAF Document
++ static Handle(XCAFApp_Application) dummy_app = XCAFApp_Application::GetApplication();
++
++ // Create an XCAF Document to contain the STEP file itself
++ Handle(TDocStd_Document) step_doc;
++
++ // Check if a STEP File is already open under this handle, if so, close it to prevent
++ // Segmentation Faults when trying to create a new document
++ if(dummy_app->NbDocuments() > 0)
++ {
++ dummy_app->GetDocument(1,step_doc);
++ dummy_app->Close(step_doc);
++ }
++ dummy_app->NewDocument ("STEP-XCAF",step_doc);
++
++ STEPCAFControl_Reader reader;
++
++ // Enable transfer of colours
++ reader.SetColorMode(Standard_True);
++
++ Standard_Integer stat = reader.ReadFile((char*)filename);
++
++ if(stat != IFSelect_RetDone)
++ {
++ delete occgeo;
++ return NULL;
++ }
++
++ reader.Transfer(step_doc);
++
++ // Read in the shape(s) and the colours present in the STEP File
++ Handle(XCAFDoc_ShapeTool) step_shape_contents = XCAFDoc_DocumentTool::ShapeTool(step_doc->Main());
++ Handle(XCAFDoc_ColorTool) step_colour_contents = XCAFDoc_DocumentTool::ColorTool(step_doc->Main());
++
++ TDF_LabelSequence step_shapes;
++ step_shape_contents->GetShapes(step_shapes);
++
++ // List out the available colours in the STEP File as Colour Names
++ TDF_LabelSequence all_colours;
++ step_colour_contents->GetColors(all_colours);
++ PrintMessage(1,"Number of colours in STEP File: ",all_colours.Length());
++ for(int i = 1; i <= all_colours.Length(); i++)
++ {
++ Quantity_Color col;
++ stringstream col_rgb;
++ step_colour_contents->GetColor(all_colours.Value(i),col);
++ col_rgb << " : (" << col.Red() << "," << col.Green() << "," << col.Blue() << ")";
++ PrintMessage(1, "Colour [", i, "] = ",col.StringName(col.Name()),col_rgb.str());
++ }
++
++
++ // For the STEP File Reader in OCC, the 1st Shape contains the entire
++ // compound geometry as one shape
++ occgeo->shape = step_shape_contents->GetShape(step_shapes.Value(1));
++ occgeo->face_colours = step_colour_contents;
++ occgeo->changed = 1;
++ occgeo->BuildFMap();
++
++ occgeo->CalcBoundingBox();
++ PrintContents (occgeo);
++
++ return occgeo;
++ }
++
++
++
++
++ OCCGeometry *LoadOCC_BREP (const char *filename)
++ {
++ OCCGeometry * occgeo;
++ occgeo = new OCCGeometry;
++
++ BRep_Builder aBuilder;
++ Standard_Boolean result = BRepTools::Read(occgeo->shape, const_cast<char*> (filename),aBuilder);
++
++ if(!result)
++ {
++ delete occgeo;
++ return NULL;
++ }
++
++ // Philippose - 23/02/2009
++ // Fixed a bug in the OpenCascade XDE Colour handling when
++ // opening BREP Files, since BREP Files have no colour data.
++ // Hence, the face_colours Handle needs to be created as a NULL handle.
++ occgeo->face_colours = Handle(XCAFDoc_ColorTool)();
++ occgeo->face_colours.Nullify();
++ occgeo->changed = 1;
++ occgeo->BuildFMap();
++
++ occgeo->CalcBoundingBox();
++ PrintContents (occgeo);
++
++ return occgeo;
++ }
++
++
++ void OCCGeometry :: Save (string sfilename) const
++ {
++ const char * filename = sfilename.c_str();
++ if (strlen(filename) < 4)
++ throw NgException ("illegal filename");
++
++ if (strcmp (&filename[strlen(filename)-3], "igs") == 0)
++ {
++ IGESControl_Writer writer("millimeters", 1);
++ writer.AddShape (shape);
++ writer.Write (filename);
++ }
++ else if (strcmp (&filename[strlen(filename)-3], "stp") == 0)
++ {
++ STEPControl_Writer writer;
++ writer.Transfer (shape, STEPControl_AsIs);
++ writer.Write (filename);
++ }
++ else if (strcmp (&filename[strlen(filename)-3], "stl") == 0)
++ {
++ StlAPI_Writer writer;
++ writer.ASCIIMode() = Standard_True;
++ writer.Write (shape, filename);
++ }
++ else if (strcmp (&filename[strlen(filename)-4], "stlb") == 0)
++ {
++ StlAPI_Writer writer;
++ writer.ASCIIMode() = Standard_False;
++ writer.Write (shape, filename);
++ }
++ }
++
++
++
++ const char * shapesname[] =
++ {" ", "CompSolids", "Solids", "Shells",
++
++ "Faces", "Wires", "Edges", "Vertices"};
++
++ const char * shapename[] =
++ {" ", "CompSolid", "Solid", "Shell",
++ "Face", "Wire", "Edge", "Vertex"};
++
++ const char * orientationstring[] =
++ {"+", "-"};
++
++
++
++
++ void OCCGeometry :: RecursiveTopologyTree (const TopoDS_Shape & sh,
++ stringstream & str,
++ TopAbs_ShapeEnum l,
++ bool isfree,
++ const char * lname)
++ {
++ if (l > TopAbs_VERTEX) return;
++
++ TopExp_Explorer e;
++ int count = 0;
++ int count2 = 0;
++
++ if (isfree)
++ e.Init(sh, l, TopAbs_ShapeEnum(l-1));
++ else
++ e.Init(sh, l);
++
++ for (; e.More(); e.Next())
++ {
++ count++;
++
++ stringstream lname2;
++ lname2 << lname << "/" << shapename[l] << count;
++ str << lname2.str() << " ";
++
++ switch (e.Current().ShapeType())
++ {
++ case TopAbs_SOLID:
++ count2 = somap.FindIndex(TopoDS::Solid(e.Current())); break;
++ case TopAbs_SHELL:
++ count2 = shmap.FindIndex(TopoDS::Shell(e.Current())); break;
++ case TopAbs_FACE:
++ count2 = fmap.FindIndex(TopoDS::Face(e.Current())); break;
++ case TopAbs_WIRE:
++ count2 = wmap.FindIndex(TopoDS::Wire(e.Current())); break;
++ case TopAbs_EDGE:
++ count2 = emap.FindIndex(TopoDS::Edge(e.Current())); break;
++ case TopAbs_VERTEX:
++ count2 = vmap.FindIndex(TopoDS::Vertex(e.Current())); break;
++ default:
++ cout << "RecursiveTopologyTree: Case " << e.Current().ShapeType() << " not handeled" << endl;
++ }
++
++ int nrsubshapes = 0;
++
++ if (l <= TopAbs_WIRE)
++ {
++ TopExp_Explorer e2;
++ for (e2.Init (e.Current(), TopAbs_ShapeEnum (l+1));
++ e2.More(); e2.Next())
++ nrsubshapes++;
++ }
++
++ str << "{" << shapename[l] << " " << count2;
++
++ if (l <= TopAbs_EDGE)
++ {
++ str << " (" << orientationstring[e.Current().Orientation()];
++ if (nrsubshapes != 0) str << ", " << nrsubshapes;
++ str << ") } ";
++ }
++ else
++ str << " } ";
++
++ RecursiveTopologyTree (e.Current(), str, TopAbs_ShapeEnum (l+1),
++ false, (char*)lname2.str().c_str());
++
++ }
++ }
++
++
++
++
++ void OCCGeometry :: GetTopologyTree (stringstream & str)
++ {
++ cout << "Building topology tree ... " << flush;
++ RecursiveTopologyTree (shape, str, TopAbs_COMPSOLID, false, "CompSolids");
++ RecursiveTopologyTree (shape, str, TopAbs_SOLID, true, "FreeSolids");
++ RecursiveTopologyTree (shape, str, TopAbs_SHELL, true, "FreeShells");
++ RecursiveTopologyTree (shape, str, TopAbs_FACE, true, "FreeFaces");
++ RecursiveTopologyTree (shape, str, TopAbs_WIRE, true, "FreeWires");
++ RecursiveTopologyTree (shape, str, TopAbs_EDGE, true, "FreeEdges");
++ RecursiveTopologyTree (shape, str, TopAbs_VERTEX, true, "FreeVertices");
++ str << flush;
++ // cout << "done" << endl;
++ }
++
++
++
++
++ void OCCGeometry :: CheckIrregularEntities(stringstream & str)
++ {
++ ShapeAnalysis_CheckSmallFace csm;
++
++ csm.SetTolerance (1e-6);
++
++ TopTools_DataMapOfShapeListOfShape mapEdges;
++ ShapeAnalysis_DataMapOfShapeListOfReal mapParam;
++ TopoDS_Compound theAllVert;
++
++ int spotfaces = 0;
++ int stripsupportfaces = 0;
++ int singlestripfaces = 0;
++ int stripfaces = 0;
++ int facessplitbyvertices = 0;
++ int stretchedpinfaces = 0;
++ int smoothpinfaces = 0;
++ int twistedfaces = 0;
++ // int edgessamebutnotidentified = 0;
++
++ cout << "checking faces ... " << flush;
++
++ int i;
++ for (i = 1; i <= fmap.Extent(); i++)
++ {
++ TopoDS_Face face = TopoDS::Face (fmap(i));
++ TopoDS_Edge e1, e2;
++
++ if (csm.CheckSpotFace (face))
++ {
++ if (!spotfaces++)
++ str << "SpotFace {Spot face} ";
++
++ (*testout) << "Face " << i << " is a spot face" << endl;
++ str << "SpotFace/Face" << i << " ";
++ str << "{Face " << i << " } ";
++ }
++
++ if (csm.IsStripSupport (face))
++ {
++ if (!stripsupportfaces++)
++ str << "StripSupportFace {Strip support face} ";
++
++ (*testout) << "Face " << i << " has strip support" << endl;
++ str << "StripSupportFace/Face" << i << " ";
++ str << "{Face " << i << " } ";
++ }
++
++ if (csm.CheckSingleStrip(face, e1, e2))
++ {
++ if (!singlestripfaces++)
++ str << "SingleStripFace {Single strip face} ";
++
++ (*testout) << "Face " << i << " is a single strip (edge " << emap.FindIndex(e1)
++ << " and edge " << emap.FindIndex(e2) << " are identical)" << endl;
++ str << "SingleStripFace/Face" << i << " ";
++ str << "{Face " << i << " (edge " << emap.FindIndex(e1)
++ << " and edge " << emap.FindIndex(e2) << " are identical)} ";
++ }
++
++ if (csm.CheckStripFace(face, e1, e2))
++ {
++ if (!stripfaces++)
++ str << "StripFace {Strip face} ";
++
++ (*testout) << "Face " << i << " is a strip (edge " << emap.FindIndex(e1)
++ << " and edge " << emap.FindIndex(e2)
++ << " are identical)" << endl;
++ str << "StripFace/Face" << i << " ";
++ str << "{Face " << i << " (edge " << emap.FindIndex(e1)
++ << " and edge " << emap.FindIndex(e2) << " are identical)} ";
++ }
++
++ if (int count = csm.CheckSplittingVertices(face, mapEdges, mapParam, theAllVert))
++ {
++ if (!facessplitbyvertices++)
++ str << "FaceSplitByVertices {Face split by vertices} ";
++
++ (*testout) << "Face " << i << " is split by " << count
++ << " vertex/vertices " << endl;
++ str << "FaceSplitByVertices/Face" << i << " ";
++ str << "{Face " << i << " (split by " << count << "vertex/vertices)} ";
++ }
++
++ int whatrow, sens;
++ if (int type = csm.CheckPin (face, whatrow, sens))
++ {
++ if (type == 1)
++ {
++ if (!smoothpinfaces++)
++ str << "SmoothPinFace {Smooth pin face} ";
++
++ (*testout) << "Face " << i << " is a smooth pin" << endl;
++ str << "SmoothPinFace/Face" << i << " ";
++ str << "{Face " << i << " } ";
++ }
++ else
++ {
++ if (!stretchedpinfaces++)
++ str << "StretchedPinFace {Stretched pin face} ";
++
++ (*testout) << "Face " << i << " is a streched pin" << endl;
++ str << "StretchedPinFace/Face" << i << " ";
++ str << "{Face " << i << " } ";
++ }
++ }
++
++ double paramu, paramv;
++ if (csm.CheckTwisted (face, paramu, paramv))
++ {
++ if (!twistedfaces++)
++ str << "TwistedFace {Twisted face} ";
++
++ (*testout) << "Face " << i << " is twisted" << endl;
++ str << "TwistedFace/Face" << i << " ";
++ str << "{Face " << i << " } ";
++ }
++ }
++
++ cout << "done" << endl;
++ cout << "checking edges ... " << flush;
++
++ // double dmax;
++ // int cnt = 0;
++ Array <double> edgeLengths;
++ Array <int> order;
++ edgeLengths.SetSize (emap.Extent());
++ order.SetSize (emap.Extent());
++
++ for (i = 1; i <= emap.Extent(); i++)
++ {
++ TopoDS_Edge edge1 = TopoDS::Edge (emap(i));
++ GProp_GProps system;
++ BRepGProp::LinearProperties(edge1, system);
++ edgeLengths[i-1] = system.Mass();
++ }
++
++ Sort (edgeLengths, order);
++
++ str << "ShortestEdges {Shortest edges} ";
++ for (i = 1; i <= min(20, emap.Extent()); i++)
++ {
++ str << "ShortestEdges/Edge" << i;
++ str << " {Edge " << order[i-1] << " (L=" << edgeLengths[order[i-1]-1] << ")} ";
++ }
++
++ str << flush;
++
++ cout << "done" << endl;
++ }
++
++
++
++
++ void OCCGeometry :: GetUnmeshedFaceInfo (stringstream & str)
++ {
++ for (int i = 1; i <= fmap.Extent(); i++)
++ {
++ if (facemeshstatus[i-1] == -1)
++ str << "Face" << i << " {Face " << i << " } ";
++ }
++ str << flush;
++ }
++
++
++
++
++ void OCCGeometry :: GetNotDrawableFaces (stringstream & str)
++ {
++ for (int i = 1; i <= fmap.Extent(); i++)
++ {
++ if (!fvispar[i-1].IsDrawable())
++ str << "Face" << i << " {Face " << i << " } ";
++ }
++ str << flush;
++ }
++
++
++
++
++ bool OCCGeometry :: ErrorInSurfaceMeshing ()
++ {
++ for (int i = 1; i <= fmap.Extent(); i++)
++ if (facemeshstatus[i-1] == -1)
++ return true;
++
++ return false;
++ }
++
++
++
++
++ int OCCGeometry :: GenerateMesh (Mesh*& mesh, MeshingParameters & mparam,
++ int perfstepsstart, int perfstepsend)
++ {
++ return OCCGenerateMesh (*this, mesh, mparam, perfstepsstart, perfstepsend);
++ }
++
++
++
++
++ const Refinement & OCCGeometry :: GetRefinement () const
++ {
++ return * new OCCRefinementSurfaces (*this);
++ }
++
++
++
++
++ OCCParameters :: OCCParameters()
++ {
++ resthcloseedgefac = 1;
++ resthcloseedgeenable = 1;
++ resthminedgelen = 0.001;
++ resthminedgelenenable = 1;
++ }
++
++
++
++
++ void OCCParameters :: Print(ostream & ost) const
++ {
++ ost << "OCC Parameters:" << endl
++ << "close edges: " << resthcloseedgeenable
++ << ", fac = " << resthcloseedgefac << endl
++ << "minimum edge length: " << resthminedgelenenable
++ << ", min len = " << resthminedgelen << endl;
++ }
++
++
++
++
++ OCCParameters occparam;
++
++}
++
++
++#endif
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occgeom.hpp netgen-5.3.1_SRC_modif/libsrc/occ/occgeom.hpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occgeom.hpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occgeom.hpp 2019-11-14 16:56:23.322426671 +0300
+@@ -1,457 +1,475 @@
+-#ifndef FILE_OCCGEOM\r
+-#define FILE_OCCGEOM\r
+-\r
+-/* *************************************************************************/\r
+-/* File: occgeom.hpp */\r
+-/* Author: Robert Gaisbauer */\r
+-/* Date: 26. May 03 */\r
+-/* *************************************************************************/\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-\r
+-#include <meshing.hpp>\r
+-\r
+-#include "BRep_Tool.hxx"\r
+-#include "Geom_Curve.hxx"\r
+-#include "Geom2d_Curve.hxx"\r
+-#include "Geom_Surface.hxx"\r
+-#include "GeomAPI_ProjectPointOnSurf.hxx"\r
+-#include "GeomAPI_ProjectPointOnCurve.hxx"\r
+-#include "BRepTools.hxx"\r
+-#include "TopExp.hxx"\r
+-#include "BRepBuilderAPI_MakeVertex.hxx"\r
+-#include "BRepBuilderAPI_MakeShell.hxx"\r
+-#include "BRepBuilderAPI_MakeSolid.hxx"\r
+-#include "BRepOffsetAPI_Sewing.hxx"\r
+-#include "BRepLProp_SLProps.hxx"\r
+-#include "BRepAdaptor_Surface.hxx"\r
+-#include "Poly_Triangulation.hxx"\r
+-#include "Poly_Array1OfTriangle.hxx"\r
+-#include "TColgp_Array1OfPnt2d.hxx"\r
+-#include "Poly_Triangle.hxx"\r
+-#include "GProp_GProps.hxx"\r
+-#include "BRepGProp.hxx"\r
+-#include "Geom_Surface.hxx"\r
+-#include "TopExp.hxx"\r
+-#include "gp_Pnt.hxx"\r
+-#include "TopoDS.hxx"\r
+-#include "TopoDS_Solid.hxx"\r
+-#include "TopExp_Explorer.hxx"\r
+-#include "TopTools_ListIteratorOfListOfShape.hxx"\r
+-#include "BRep_Tool.hxx"\r
+-#include "Geom_Curve.hxx"\r
+-#include "Geom2d_Curve.hxx"\r
+-#include "Geom_Surface.hxx"\r
+-#include "GeomAPI_ProjectPointOnSurf.hxx"\r
+-#include "GeomAPI_ProjectPointOnCurve.hxx"\r
+-#include "TopoDS_Wire.hxx"\r
+-#include "BRepTools_WireExplorer.hxx"\r
+-#include "BRepTools.hxx"\r
+-#include "TopTools_IndexedMapOfShape.hxx"\r
+-#include "TopExp.hxx"\r
+-#include "BRepBuilderAPI_MakeVertex.hxx"\r
+-#include "BRepBuilderAPI_MakeShell.hxx"\r
+-#include "BRepBuilderAPI_MakeSolid.hxx"\r
+-#include "BRepOffsetAPI_Sewing.hxx"\r
+-#include "BRepLProp_CLProps.hxx"\r
+-#include "BRepLProp_SLProps.hxx"\r
+-#include "BRepAdaptor_Surface.hxx"\r
+-#include "BRepAdaptor_Curve.hxx"\r
+-#include "Poly_Triangulation.hxx"\r
+-#include "Poly_Array1OfTriangle.hxx"\r
+-#include "TColgp_Array1OfPnt2d.hxx"\r
+-#include "Poly_Triangle.hxx"\r
+-#include "GProp_GProps.hxx"\r
+-#include "BRepGProp.hxx"\r
+-#include "TopoDS_Shape.hxx"\r
+-#include "TopoDS_Face.hxx"\r
+-#include "IGESToBRep_Reader.hxx"\r
+-#include "Interface_Static.hxx"\r
+-#include "GeomAPI_ExtremaCurveCurve.hxx"\r
+-#include "Standard_ErrorHandler.hxx"\r
+-#include "Standard_Failure.hxx"\r
+-#include "ShapeUpgrade_ShellSewing.hxx"\r
+-#include "ShapeFix_Shape.hxx"\r
+-#include "ShapeFix_Wireframe.hxx"\r
+-#include "BRepMesh.hxx"\r
+-#include "BRepMesh_IncrementalMesh.hxx"\r
+-#include "BRepBndLib.hxx"\r
+-#include "Bnd_Box.hxx"\r
+-#include "ShapeAnalysis.hxx"\r
+-#include "ShapeBuild_ReShape.hxx"\r
+-\r
+-\r
+-// Philippose - 29/01/2009\r
+-// OpenCascade XDE Support\r
+-// Include support for OpenCascade XDE Features\r
+-#include "TDocStd_Document.hxx"\r
+-#include "Quantity_Color.hxx"\r
+-#include "XCAFApp_Application.hxx"\r
+-#include "XCAFDoc_ShapeTool.hxx"\r
+-#include "XCAFDoc_Color.hxx"\r
+-#include "XCAFDoc_ColorTool.hxx"\r
+-#include "XCAFDoc_ColorType.hxx"\r
+-#include "XCAFDoc_LayerTool.hxx"\r
+-#include "XCAFDoc_DimTolTool.hxx"\r
+-#include "XCAFDoc_MaterialTool.hxx"\r
+-#include "XCAFDoc_DocumentTool.hxx"\r
+-#include "TDF_Label.hxx"\r
+-#include "TDF_LabelSequence.hxx"\r
+-#include "STEPCAFControl_Reader.hxx"\r
+-#include "STEPCAFControl_Writer.hxx"\r
+-#include "IGESCAFControl_Reader.hxx"\r
+-#include "IGESCAFControl_Writer.hxx"\r
+-\r
+-#include "IGESControl_Reader.hxx"\r
+-#include "STEPControl_Reader.hxx"\r
+-#include "IGESControl_Writer.hxx"\r
+-#include "STEPControl_Writer.hxx"\r
+-\r
+-#include "StlAPI_Writer.hxx"\r
+-#include "STEPControl_StepModelType.hxx"\r
+-\r
+-namespace netgen\r
+-{\r
+-#include "occmeshsurf.hpp"\r
+-\r
+- extern DLL_HEADER MeshingParameters mparam;\r
+-\r
+-#define PROJECTION_TOLERANCE 1e-10\r
+-\r
+-#define ENTITYISVISIBLE 1\r
+-#define ENTITYISHIGHLIGHTED 2\r
+-#define ENTITYISDRAWABLE 4\r
+-\r
+-#define OCCGEOMETRYVISUALIZATIONNOCHANGE 0\r
+-#define OCCGEOMETRYVISUALIZATIONFULLCHANGE 1 // Compute transformation matrices and redraw\r
+-#define OCCGEOMETRYVISUALIZATIONHALFCHANGE 2 // Redraw\r
+-\r
+-\r
+-\r
+- class EntityVisualizationCode\r
+- {\r
+- int code;\r
+-\r
+- public:\r
+-\r
+- EntityVisualizationCode()\r
+- { code = ENTITYISVISIBLE + !ENTITYISHIGHLIGHTED + ENTITYISDRAWABLE;}\r
+-\r
+- int IsVisible ()\r
+- { return code & ENTITYISVISIBLE;}\r
+-\r
+- int IsHighlighted ()\r
+- { return code & ENTITYISHIGHLIGHTED;}\r
+-\r
+- int IsDrawable ()\r
+- { return code & ENTITYISDRAWABLE;}\r
+-\r
+- void Show ()\r
+- { code |= ENTITYISVISIBLE;}\r
+-\r
+- void Hide ()\r
+- { code &= ~ENTITYISVISIBLE;}\r
+-\r
+- void Highlight ()\r
+- { code |= ENTITYISHIGHLIGHTED;}\r
+-\r
+- void Lowlight ()\r
+- { code &= ~ENTITYISHIGHLIGHTED;}\r
+-\r
+- void SetDrawable ()\r
+- { code |= ENTITYISDRAWABLE;}\r
+-\r
+- void SetNotDrawable ()\r
+- { code &= ~ENTITYISDRAWABLE;}\r
+- };\r
+-\r
+-\r
+-\r
+- class Line\r
+- {\r
+- public:\r
+- Point<3> p0, p1;\r
+-\r
+- double Dist (Line l);\r
+-\r
+- double Length ();\r
+- };\r
+-\r
+-\r
+-\r
+- inline double Det3 (double a00, double a01, double a02,\r
+- double a10, double a11, double a12,\r
+- double a20, double a21, double a22)\r
+- {\r
+- return a00*a11*a22 + a01*a12*a20 + a10*a21*a02 - a20*a11*a02 - a10*a01*a22 - a21*a12*a00;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- class OCCGeometry : public NetgenGeometry\r
+- {\r
+- Point<3> center;\r
+-\r
+- public:\r
+- TopoDS_Shape shape;\r
+- TopTools_IndexedMapOfShape fmap, emap, vmap, somap, shmap, wmap;\r
+- Array<bool> fsingular, esingular, vsingular;\r
+- Box<3> boundingbox;\r
+-\r
+- // Philippose - 29/01/2009\r
+- // OpenCascade XDE Support\r
+- // XCAF Handle to make the face colours available to the rest of\r
+- // the system\r
+- Handle_XCAFDoc_ColorTool face_colours;\r
+-\r
+- mutable int changed;\r
+- Array<int> facemeshstatus;\r
+-\r
+- // Philippose - 15/01/2009\r
+- // Maximum mesh size for a given face\r
+- // (Used to explicitly define mesh size limits on individual faces)\r
+- Array<double> face_maxh;\r
+- \r
+- // Philippose - 14/01/2010\r
+- // Boolean array to detect whether a face has been explicitly modified \r
+- // by the user or not\r
+- Array<bool> face_maxh_modified;\r
+-\r
+- // Philippose - 15/01/2009\r
+- // Indicates which faces have been selected by the user in geometry mode\r
+- // (Currently handles only selection of one face at a time, but an array would\r
+- // help to extend this to multiple faces)\r
+- Array<bool> face_sel_status;\r
+-\r
+- Array<EntityVisualizationCode> fvispar, evispar, vvispar;\r
+-\r
+- double tolerance;\r
+- bool fixsmalledges;\r
+- bool fixspotstripfaces;\r
+- bool sewfaces;\r
+- bool makesolids;\r
+- bool splitpartitions;\r
+-\r
+- OCCGeometry()\r
+- {\r
+- somap.Clear();\r
+- shmap.Clear();\r
+- fmap.Clear();\r
+- wmap.Clear();\r
+- emap.Clear();\r
+- vmap.Clear();\r
+- }\r
+-\r
+-\r
+- virtual void Save (string filename) const;\r
+-\r
+-\r
+- void BuildFMap();\r
+-\r
+- Box<3> GetBoundingBox()\r
+- { return boundingbox;}\r
+-\r
+- int NrSolids()\r
+- { return somap.Extent();}\r
+-\r
+- // Philippose - 17/01/2009\r
+- // Total number of faces in the geometry\r
+- int NrFaces()\r
+- { return fmap.Extent();}\r
+-\r
+- void SetCenter()\r
+- { center = boundingbox.Center();}\r
+-\r
+- Point<3> Center()\r
+- { return center;}\r
+-\r
+- void Project (int surfi, Point<3> & p) const;\r
+- bool FastProject (int surfi, Point<3> & ap, double& u, double& v) const;\r
+-\r
+- OCCSurface GetSurface (int surfi)\r
+- {\r
+- cout << "OCCGeometry::GetSurface using PLANESPACE" << endl;\r
+- return OCCSurface (TopoDS::Face(fmap(surfi)), PLANESPACE);\r
+- }\r
+-\r
+- void CalcBoundingBox ();\r
+- void BuildVisualizationMesh (double deflection);\r
+-\r
+- void RecursiveTopologyTree (const TopoDS_Shape & sh,\r
+- stringstream & str,\r
+- TopAbs_ShapeEnum l,\r
+- bool free,\r
+- const char * lname);\r
+-\r
+- void GetTopologyTree (stringstream & str);\r
+-\r
+- void PrintNrShapes ();\r
+-\r
+- void CheckIrregularEntities (stringstream & str);\r
+-\r
+- void SewFaces();\r
+-\r
+- void MakeSolid();\r
+-\r
+- void HealGeometry();\r
+-\r
+- // Philippose - 15/01/2009\r
+- // Sets the maximum mesh size for a given face\r
+- // (Note: Local mesh size limited by the global max mesh size)\r
+- void SetFaceMaxH(int facenr, double faceh)\r
+- {\r
+- if((facenr> 0) && (facenr <= fmap.Extent()))\r
+- {\r
+- face_maxh[facenr-1] = min(mparam.maxh,faceh);\r
+- \r
+- // Philippose - 14/01/2010\r
+- // If the face maxh is greater than or equal to the \r
+- // current global maximum, then identify the face as \r
+- // not explicitly controlled by the user any more\r
+- if(faceh >= mparam.maxh)\r
+- {\r
+- face_maxh_modified[facenr-1] = 0;\r
+- }\r
+- else\r
+- {\r
+- face_maxh_modified[facenr-1] = 1;\r
+- }\r
+- }\r
+- }\r
+-\r
+- // Philippose - 15/01/2009\r
+- // Returns the local mesh size of a given face\r
+- double GetFaceMaxH(int facenr)\r
+- {\r
+- if((facenr> 0) && (facenr <= fmap.Extent()))\r
+- {\r
+- return face_maxh[facenr-1];\r
+- }\r
+- else\r
+- {\r
+- return 0.0;\r
+- }\r
+- }\r
+- \r
+- // Philippose - 14/01/2010\r
+- // Returns the flag whether the given face \r
+- // has a mesh size controlled by the user or not\r
+- bool GetFaceMaxhModified(int facenr)\r
+- {\r
+- return face_maxh_modified[facenr-1];\r
+- }\r
+- \r
+- // Philippose - 17/01/2009\r
+- // Returns the index of the currently selected face\r
+- int SelectedFace()\r
+- {\r
+- int i;\r
+-\r
+- for(i = 1; i <= fmap.Extent(); i++)\r
+- {\r
+- if(face_sel_status[i-1])\r
+- {\r
+- return i;\r
+- }\r
+- }\r
+-\r
+- return 0;\r
+- }\r
+-\r
+- // Philippose - 17/01/2009\r
+- // Sets the currently selected face\r
+- void SetSelectedFace(int facenr)\r
+- {\r
+- face_sel_status = 0;\r
+-\r
+- if((facenr >= 1) && (facenr <= fmap.Extent()))\r
+- {\r
+- face_sel_status[facenr-1] = 1;\r
+- }\r
+- }\r
+-\r
+- void LowLightAll()\r
+- {\r
+- for (int i = 1; i <= fmap.Extent(); i++)\r
+- fvispar[i-1].Lowlight();\r
+- for (int i = 1; i <= emap.Extent(); i++)\r
+- evispar[i-1].Lowlight();\r
+- for (int i = 1; i <= vmap.Extent(); i++)\r
+- vvispar[i-1].Lowlight();\r
+- }\r
+-\r
+- void GetUnmeshedFaceInfo (stringstream & str);\r
+- void GetNotDrawableFaces (stringstream & str);\r
+- bool ErrorInSurfaceMeshing ();\r
+-\r
+- void WriteOCC_STL(char * filename);\r
+-\r
+- virtual int GenerateMesh (Mesh*& mesh, MeshingParameters & mparam, \r
+- int perfstepsstart, int perfstepsend);\r
+-\r
+- virtual const Refinement & GetRefinement () const;\r
+- };\r
+-\r
+-\r
+-\r
+- class OCCParameters\r
+- {\r
+- public:\r
+-\r
+- /// Factor for meshing close edges \r
+- double resthcloseedgefac;\r
+-\r
+-\r
+- /// Enable / Disable detection of close edges\r
+- int resthcloseedgeenable;\r
+-\r
+-\r
+- /// Minimum edge length to be used for dividing edges to mesh points\r
+- double resthminedgelen;\r
+-\r
+-\r
+- /// Enable / Disable use of the minimum edge length (by default use 1e-4)\r
+- int resthminedgelenenable;\r
+-\r
+- /*!\r
+- Default Constructor for the OpenCascade\r
+- Mesh generation parameter set\r
+- */\r
+- OCCParameters();\r
+-\r
+-\r
+- /*!\r
+- Dump all the OpenCascade specific meshing parameters \r
+- to console\r
+- */\r
+- void Print (ostream & ost) const;\r
+- };\r
+- \r
+-\r
+- void PrintContents (OCCGeometry * geom);\r
+-\r
+- OCCGeometry * LoadOCC_IGES (const char * filename);\r
+- OCCGeometry * LoadOCC_STEP (const char * filename);\r
+- OCCGeometry * LoadOCC_BREP (const char * filename);\r
+-\r
+- extern OCCParameters occparam;\r
+-\r
+-\r
+- // Philippose - 31.09.2009\r
+- // External access to the mesh generation functions within the OCC\r
+- // subsystem (Not sure if this is the best way to implement this....!!)\r
+- extern int OCCGenerateMesh (OCCGeometry & occgeometry, Mesh*& mesh,\r
+- MeshingParameters & mparam,\r
+- int perfstepsstart, int perfstepsend);\r
+-\r
+- extern void OCCSetLocalMeshSize(OCCGeometry & geom, Mesh & mesh);\r
+-\r
+- extern void OCCMeshSurface (OCCGeometry & geom, Mesh & mesh, int perfstepsend);\r
+-\r
+- extern void OCCFindEdges (OCCGeometry & geom, Mesh & mesh);\r
+-}\r
+-\r
+-#endif\r
+-\r
+-#endif\r
++#ifndef FILE_OCCGEOM
++#define FILE_OCCGEOM
++
++/* *************************************************************************/
++/* File: occgeom.hpp */
++/* Author: Robert Gaisbauer */
++/* Date: 26. May 03 */
++/* *************************************************************************/
++
++#ifdef OCCGEOMETRY
++
++#include <meshing.hpp>
++
++#include "BRep_Tool.hxx"
++#include "Geom_Curve.hxx"
++#include "Geom2d_Curve.hxx"
++#include "Geom_Surface.hxx"
++// #include "GeomAPI_ProjectPointOnSurf.hxx"
++// #include "GeomAPI_ProjectPointOnCurve.hxx"
++#include "BRepTools.hxx"
++#include "TopExp.hxx"
++#include "BRepBuilderAPI_MakeVertex.hxx"
++#include "BRepBuilderAPI_MakeShell.hxx"
++#include "BRepBuilderAPI_MakeSolid.hxx"
++#include "BRepOffsetAPI_Sewing.hxx"
++#include "BRepLProp_SLProps.hxx"
++#include "BRepAdaptor_Surface.hxx"
++#include "Poly_Triangulation.hxx"
++#include "Poly_Array1OfTriangle.hxx"
++#include "TColgp_Array1OfPnt2d.hxx"
++#include "Poly_Triangle.hxx"
++#include "GProp_GProps.hxx"
++#include "BRepGProp.hxx"
++#include "Geom_Surface.hxx"
++#include "TopExp.hxx"
++#include "gp_Pnt.hxx"
++#include "TopoDS.hxx"
++#include "TopoDS_Solid.hxx"
++#include "TopExp_Explorer.hxx"
++#include "TopTools_ListIteratorOfListOfShape.hxx"
++#include "BRep_Tool.hxx"
++#include "Geom_Curve.hxx"
++#include "Geom2d_Curve.hxx"
++#include "Geom_Surface.hxx"
++// #include "GeomAPI_ProjectPointOnSurf.hxx"
++// #include "GeomAPI_ProjectPointOnCurve.hxx"
++#include "TopoDS_Wire.hxx"
++#include "BRepTools_WireExplorer.hxx"
++#include "BRepTools.hxx"
++#include "TopTools_IndexedMapOfShape.hxx"
++#include "TopExp.hxx"
++#include "BRepBuilderAPI_MakeVertex.hxx"
++#include "BRepBuilderAPI_MakeShell.hxx"
++#include "BRepBuilderAPI_MakeSolid.hxx"
++#include "BRepOffsetAPI_Sewing.hxx"
++#include "BRepLProp_CLProps.hxx"
++#include "BRepLProp_SLProps.hxx"
++#include "BRepAdaptor_Surface.hxx"
++#include "BRepAdaptor_Curve.hxx"
++#include "Poly_Triangulation.hxx"
++#include "Poly_Array1OfTriangle.hxx"
++#include "TColgp_Array1OfPnt2d.hxx"
++#include "Poly_Triangle.hxx"
++#include "GProp_GProps.hxx"
++#include "BRepGProp.hxx"
++#include "TopoDS_Shape.hxx"
++#include "TopoDS_Face.hxx"
++#include "IGESToBRep_Reader.hxx"
++#include "Interface_Static.hxx"
++#include "GeomAPI_ExtremaCurveCurve.hxx"
++//#include "Standard_ErrorHandler.hxx"
++#include "Standard_Failure.hxx"
++#include "ShapeUpgrade_ShellSewing.hxx"
++#include "ShapeFix_Shape.hxx"
++#include "ShapeFix_Wireframe.hxx"
++#include <Standard_Version.hxx>
++#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) <= 0x060702
++// porting to OCCT6.7.3
++#include "BRepMesh.hxx"
++#endif
++#include "BRepMesh_IncrementalMesh.hxx"
++#include "BRepBndLib.hxx"
++#include "Bnd_Box.hxx"
++#include "ShapeAnalysis.hxx"
++#include "ShapeBuild_ReShape.hxx"
++
++// -- Optimization: to use cached projector and classifier
++#include <NCollection_DataMap.hxx>
++class ShapeAnalysis_Surface;
++class BRepTopAdaptor_FClass2d;
++
++// Philippose - 29/01/2009
++// OpenCascade XDE Support
++// Include support for OpenCascade XDE Features
++#include "TDocStd_Document.hxx"
++#include "Quantity_Color.hxx"
++#include "XCAFApp_Application.hxx"
++#include "XCAFDoc_ShapeTool.hxx"
++#include "XCAFDoc_Color.hxx"
++#include "XCAFDoc_ColorTool.hxx"
++#include "XCAFDoc_ColorType.hxx"
++#include "XCAFDoc_LayerTool.hxx"
++#include "XCAFDoc_DimTolTool.hxx"
++#include "XCAFDoc_MaterialTool.hxx"
++#include "XCAFDoc_DocumentTool.hxx"
++#include "TDF_Label.hxx"
++#include "TDF_LabelSequence.hxx"
++#include "STEPCAFControl_Reader.hxx"
++#include "STEPCAFControl_Writer.hxx"
++#include "IGESCAFControl_Reader.hxx"
++#include "IGESCAFControl_Writer.hxx"
++
++#include "IGESControl_Reader.hxx"
++#include "STEPControl_Reader.hxx"
++#include "IGESControl_Writer.hxx"
++#include "STEPControl_Writer.hxx"
++
++#include "StlAPI_Writer.hxx"
++#include "STEPControl_StepModelType.hxx"
++
++namespace netgen
++{
++#include "occmeshsurf.hpp"
++
++ extern DLL_HEADER MeshingParameters mparam;
++
++#define PROJECTION_TOLERANCE 1e-10
++
++#define ENTITYISVISIBLE 1
++#define ENTITYISHIGHLIGHTED 2
++#define ENTITYISDRAWABLE 4
++
++#define OCCGEOMETRYVISUALIZATIONNOCHANGE 0
++#define OCCGEOMETRYVISUALIZATIONFULLCHANGE 1 // Compute transformation matrices and redraw
++#define OCCGEOMETRYVISUALIZATIONHALFCHANGE 2 // Redraw
++
++
++
++ class EntityVisualizationCode
++ {
++ int code;
++
++ public:
++
++ EntityVisualizationCode()
++ { code = ENTITYISVISIBLE + !ENTITYISHIGHLIGHTED + ENTITYISDRAWABLE;}
++
++ int IsVisible ()
++ { return code & ENTITYISVISIBLE;}
++
++ int IsHighlighted ()
++ { return code & ENTITYISHIGHLIGHTED;}
++
++ int IsDrawable ()
++ { return code & ENTITYISDRAWABLE;}
++
++ void Show ()
++ { code |= ENTITYISVISIBLE;}
++
++ void Hide ()
++ { code &= ~ENTITYISVISIBLE;}
++
++ void Highlight ()
++ { code |= ENTITYISHIGHLIGHTED;}
++
++ void Lowlight ()
++ { code &= ~ENTITYISHIGHLIGHTED;}
++
++ void SetDrawable ()
++ { code |= ENTITYISDRAWABLE;}
++
++ void SetNotDrawable ()
++ { code &= ~ENTITYISDRAWABLE;}
++ };
++
++
++
++ class Line
++ {
++ public:
++ Point<3> p0, p1;
++
++ double Dist (Line l);
++
++ double Length ();
++ };
++
++
++
++ inline double Det3 (double a00, double a01, double a02,
++ double a10, double a11, double a12,
++ double a20, double a21, double a22)
++ {
++ return a00*a11*a22 + a01*a12*a20 + a10*a21*a02 - a20*a11*a02 - a10*a01*a22 - a21*a12*a00;
++ }
++
++
++
++
++ class OCCGeometry : public NetgenGeometry
++ {
++ Point<3> center;
++ // -- Optimization: to use cached projector and classifier
++ mutable NCollection_DataMap<int,Handle(ShapeAnalysis_Surface)> fprjmap;
++ mutable NCollection_DataMap<int,BRepTopAdaptor_FClass2d*> fclsmap;
++
++ public:
++ TopoDS_Shape shape;
++ TopTools_IndexedMapOfShape fmap, emap, vmap, somap, shmap, wmap;
++ Array<bool> fsingular, esingular, vsingular;
++ Box<3> boundingbox;
++
++ // Philippose - 29/01/2009
++ // OpenCascade XDE Support
++ // XCAF Handle to make the face colours available to the rest of
++ // the system
++ Handle(XCAFDoc_ColorTool) face_colours;
++
++ mutable int changed;
++ Array<int> facemeshstatus;
++
++ // Philippose - 15/01/2009
++ // Maximum mesh size for a given face
++ // (Used to explicitly define mesh size limits on individual faces)
++ Array<double> face_maxh;
++
++ // Philippose - 14/01/2010
++ // Boolean array to detect whether a face has been explicitly modified
++ // by the user or not
++ Array<bool> face_maxh_modified;
++
++ // Philippose - 15/01/2009
++ // Indicates which faces have been selected by the user in geometry mode
++ // (Currently handles only selection of one face at a time, but an array would
++ // help to extend this to multiple faces)
++ Array<bool> face_sel_status;
++
++ Array<EntityVisualizationCode> fvispar, evispar, vvispar;
++
++ double tolerance;
++ bool fixsmalledges;
++ bool fixspotstripfaces;
++ bool sewfaces;
++ bool makesolids;
++ bool splitpartitions;
++
++ OCCGeometry()
++ {
++ somap.Clear();
++ shmap.Clear();
++ fmap.Clear();
++ wmap.Clear();
++ emap.Clear();
++ vmap.Clear();
++ }
++
++
++ virtual void Save (string filename) const;
++
++
++ ~OCCGeometry(); // -- to free cached projector and classifier
++
++ void BuildFMap();
++
++ Box<3> GetBoundingBox()
++ { return boundingbox;}
++
++ int NrSolids()
++ { return somap.Extent();}
++
++ // Philippose - 17/01/2009
++ // Total number of faces in the geometry
++ int NrFaces()
++ { return fmap.Extent();}
++
++ void SetCenter()
++ { center = boundingbox.Center();}
++
++ Point<3> Center()
++ { return center;}
++
++ // void Project (int surfi, Point<3> & p) const; -- optimization
++ bool Project (int surfi, Point<3> & p, double& u, double& v) const;
++ bool FastProject (int surfi, Point<3> & ap, double& u, double& v) const;
++
++ // -- Optimization: to use cached projector and classifier
++ void GetFaceTools(int surfi, Handle(ShapeAnalysis_Surface)& proj,
++ BRepTopAdaptor_FClass2d*& cls) const;
++
++ OCCSurface GetSurface (int surfi)
++ {
++ cout << "OCCGeometry::GetSurface using PLANESPACE" << endl;
++ return OCCSurface (TopoDS::Face(fmap(surfi)), PLANESPACE);
++ }
++
++ void CalcBoundingBox ();
++ void BuildVisualizationMesh (double deflection);
++
++ void RecursiveTopologyTree (const TopoDS_Shape & sh,
++ stringstream & str,
++ TopAbs_ShapeEnum l,
++ bool free,
++ const char * lname);
++
++ void GetTopologyTree (stringstream & str);
++
++ void PrintNrShapes ();
++
++ void CheckIrregularEntities (stringstream & str);
++
++ void SewFaces();
++
++ void MakeSolid();
++
++ void HealGeometry();
++
++ // Philippose - 15/01/2009
++ // Sets the maximum mesh size for a given face
++ // (Note: Local mesh size limited by the global max mesh size)
++ void SetFaceMaxH(int facenr, double faceh)
++ {
++ if((facenr> 0) && (facenr <= fmap.Extent()))
++ {
++ face_maxh[facenr-1] = min(mparam.maxh,faceh);
++
++ // Philippose - 14/01/2010
++ // If the face maxh is greater than or equal to the
++ // current global maximum, then identify the face as
++ // not explicitly controlled by the user any more
++ if(faceh >= mparam.maxh)
++ {
++ face_maxh_modified[facenr-1] = 0;
++ }
++ else
++ {
++ face_maxh_modified[facenr-1] = 1;
++ }
++ }
++ }
++
++ // Philippose - 15/01/2009
++ // Returns the local mesh size of a given face
++ double GetFaceMaxH(int facenr)
++ {
++ if((facenr> 0) && (facenr <= fmap.Extent()))
++ {
++ return face_maxh[facenr-1];
++ }
++ else
++ {
++ return 0.0;
++ }
++ }
++
++ // Philippose - 14/01/2010
++ // Returns the flag whether the given face
++ // has a mesh size controlled by the user or not
++ bool GetFaceMaxhModified(int facenr)
++ {
++ return face_maxh_modified[facenr-1];
++ }
++
++ // Philippose - 17/01/2009
++ // Returns the index of the currently selected face
++ int SelectedFace()
++ {
++ int i;
++
++ for(i = 1; i <= fmap.Extent(); i++)
++ {
++ if(face_sel_status[i-1])
++ {
++ return i;
++ }
++ }
++
++ return 0;
++ }
++
++ // Philippose - 17/01/2009
++ // Sets the currently selected face
++ void SetSelectedFace(int facenr)
++ {
++ face_sel_status = 0;
++
++ if((facenr >= 1) && (facenr <= fmap.Extent()))
++ {
++ face_sel_status[facenr-1] = 1;
++ }
++ }
++
++ void LowLightAll()
++ {
++ for (int i = 1; i <= fmap.Extent(); i++)
++ fvispar[i-1].Lowlight();
++ for (int i = 1; i <= emap.Extent(); i++)
++ evispar[i-1].Lowlight();
++ for (int i = 1; i <= vmap.Extent(); i++)
++ vvispar[i-1].Lowlight();
++ }
++
++ void GetUnmeshedFaceInfo (stringstream & str);
++ void GetNotDrawableFaces (stringstream & str);
++ bool ErrorInSurfaceMeshing ();
++
++ void WriteOCC_STL(char * filename);
++
++ virtual int GenerateMesh (Mesh*& mesh, MeshingParameters & mparam,
++ int perfstepsstart, int perfstepsend);
++
++ virtual const Refinement & GetRefinement () const;
++ };
++
++
++
++ class OCCParameters
++ {
++ public:
++
++ /// Factor for meshing close edges
++ double resthcloseedgefac;
++
++
++ /// Enable / Disable detection of close edges
++ int resthcloseedgeenable;
++
++
++ /// Minimum edge length to be used for dividing edges to mesh points
++ double resthminedgelen;
++
++
++ /// Enable / Disable use of the minimum edge length (by default use 1e-4)
++ int resthminedgelenenable;
++
++ /*!
++ Default Constructor for the OpenCascade
++ Mesh generation parameter set
++ */
++ OCCParameters();
++
++
++ /*!
++ Dump all the OpenCascade specific meshing parameters
++ to console
++ */
++ void Print (ostream & ost) const;
++ };
++
++
++ void PrintContents (OCCGeometry * geom);
++
++ OCCGeometry * LoadOCC_IGES (const char * filename);
++ OCCGeometry * LoadOCC_STEP (const char * filename);
++ OCCGeometry * LoadOCC_BREP (const char * filename);
++
++ extern OCCParameters occparam;
++
++
++ // Philippose - 31.09.2009
++ // External access to the mesh generation functions within the OCC
++ // subsystem (Not sure if this is the best way to implement this....!!)
++ extern int OCCGenerateMesh (OCCGeometry & occgeometry, Mesh*& mesh,
++ MeshingParameters & mparam,
++ int perfstepsstart, int perfstepsend);
++
++ extern void OCCSetLocalMeshSize(OCCGeometry & geom, Mesh & mesh);
++
++ extern void OCCMeshSurface (OCCGeometry & geom, Mesh & mesh, int perfstepsend);
++
++ extern void OCCFindEdges (OCCGeometry & geom, Mesh & mesh);
++}
++
++#endif
++
++#endif
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occmeshsurf.cpp netgen-5.3.1_SRC_modif/libsrc/occ/occmeshsurf.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occmeshsurf.cpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occmeshsurf.cpp 2019-11-14 16:56:24.270400136 +0300
+@@ -6,6 +6,7 @@
+ #include <meshing.hpp>
+ #include <GeomLProp_SLProps.hxx>
+ #include <ShapeAnalysis_Surface.hxx>
++#include <GeomAPI_ProjectPointOnCurve.hxx> // -- moved here from occgeom.hpp
+
+
+ namespace netgen
+@@ -96,13 +97,16 @@
+
+ n.Normalize();
+ }
+- else
++ else if ( lprop.IsNormalDefined() )
+ {
+ n(0)=lprop.Normal().X();
+ n(1)=lprop.Normal().Y();
+ n(2)=lprop.Normal().Z();
+ }
+-
++ else
++ {
++ n = 0;
++ }
+ if(glob_testout)
+ {
+ (*testout) << "u " << geominfo.u << " v " << geominfo.v
+@@ -434,23 +438,33 @@
+
+ void MeshOptimize2dOCCSurfaces :: ProjectPoint (INDEX surfind, Point<3> & p) const
+ {
+- geometry.Project (surfind, p);
++ // geometry.Project (surfind, p); -- signature of Project() changed for optimization
++ double u, v;
++ geometry.Project (surfind, p, u, v);
+ }
+
+
+ int MeshOptimize2dOCCSurfaces :: ProjectPointGI (INDEX surfind, Point<3> & p, PointGeomInfo & gi) const
+ {
+- double u = gi.u;
+- double v = gi.v;
++ //double u = gi.u;
++ //double v = gi.v;
+
+ Point<3> hp = p;
+- if (geometry.FastProject (surfind, hp, u, v))
+- {
++ // -- u and v are computed by FastProject() and Project(), no need to call CalcPointGeomInfo()
++ // if (geometry.FastProject (surfind, hp, u, v))
++ // {
++ // p = hp;
++ // return 1;
++ // }
++ // ProjectPoint (surfind, p);
++ // return CalcPointGeomInfo (surfind, gi, p);
++ bool ok;
++ if (gi.trignum > 0)
++ ok = geometry.FastProject (surfind, hp, gi.u, gi.v);
++ else
++ ok = geometry.Project (surfind, hp, gi.u, gi.v);
+ p = hp;
+- return 1;
+- }
+- ProjectPoint (surfind, p);
+- return CalcPointGeomInfo (surfind, gi, p);
++ return ok;
+ }
+
+
+@@ -680,7 +694,8 @@
+ if (!geometry.FastProject (surfi, hnewp, u, v))
+ {
+ // cout << "Fast projection to surface fails! Using OCC projection" << endl;
+- geometry.Project (surfi, hnewp);
++ // geometry.Project (surfi, hnewp); -- Project() changed for optimization
++ geometry.Project (surfi, hnewp, u, v);
+ }
+
+ newgi.trignum = 1;
+@@ -689,7 +704,7 @@
+ }
+
+ newp = hnewp;
+- }
++ }//; -- to compile with -Wall -pedantic
+
+
+ void OCCRefinementSurfaces ::
+@@ -708,14 +723,18 @@
+ hnewp = Point<3> (pnt.X(), pnt.Y(), pnt.Z());
+ newp = hnewp;
+ newgi = ap1;
+- };
++ }//; -- to compile with -Wall -pedantic
+
+
+ void OCCRefinementSurfaces :: ProjectToSurface (Point<3> & p, int surfi) const
+ {
+ if (surfi > 0)
+- geometry.Project (surfi, p);
+- };
++ //geometry.Project (surfi, p);
++ {
++ double u, v;
++ geometry.Project (surfi, p, u, v);
++ }
++ }//; -- to compile with -Wall -pedantic
+
+ void OCCRefinementSurfaces :: ProjectToSurface (Point<3> & p, int surfi, PointGeomInfo & gi) const
+ {
+@@ -723,9 +742,10 @@
+ if (!geometry.FastProject (surfi, p, gi.u, gi.v))
+ {
+ cout << "Fast projection to surface fails! Using OCC projection" << endl;
+- geometry.Project (surfi, p);
++ double u, v;
++ geometry.Project (surfi, p, u, v);
++ }
+ }
+- };
+
+
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/occpkg.cpp netgen-5.3.1_SRC_modif/libsrc/occ/occpkg.cpp
+--- netgen-5.3.1_SRC_orig/libsrc/occ/occpkg.cpp 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/occpkg.cpp 2019-11-14 16:56:23.554420177 +0300
+@@ -1,1024 +1,1024 @@
+-#ifdef OCCGEOMETRY\r
+-\r
+-#include <mystdlib.h>\r
+-#include <myadt.hpp>\r
+-#include <linalg.hpp>\r
+-#include <csg.hpp>\r
+-#include <occgeom.hpp>\r
+-\r
+-\r
+-#include <incvis.hpp>\r
+-#include <visual.hpp>\r
+-\r
+-#include "../meshing/bcfunctions.hpp"\r
+-\r
+-#include "vsocc.hpp"\r
+-\r
+-\r
+-extern "C" int Ng_occ_Init (Tcl_Interp * interp);\r
+-\r
+-\r
+-\r
+-namespace netgen\r
+-{\r
+- extern AutoPtr<NetgenGeometry> ng_geometry;\r
+- extern AutoPtr<Mesh> mesh;\r
+- \r
+- char * err_needsoccgeometry = (char*) "This operation needs an OCC geometry";\r
+- extern char * err_needsmesh;\r
+- extern char * err_jobrunning;\r
+-\r
+-\r
+-\r
+- \r
+- class OCCGeometryRegister : public GeometryRegister\r
+- {\r
+- public:\r
+- virtual NetgenGeometry * Load (string filename) const;\r
+- virtual VisualScene * GetVisualScene (const NetgenGeometry * geom) const;\r
+-\r
+- virtual void SetParameters (Tcl_Interp * interp) \r
+- {\r
+- occparam.resthcloseedgefac =\r
+- atof (Tcl_GetVar (interp, "::stloptions.resthcloseedgefac", 0));\r
+- occparam.resthcloseedgeenable =\r
+- atoi (Tcl_GetVar (interp, "::stloptions.resthcloseedgeenable", 0));\r
+- occparam.resthminedgelen = \r
+- atof (Tcl_GetVar (interp, "::stloptions.resthminedgelen", 0));\r
+- occparam.resthminedgelenenable = \r
+- atoi (Tcl_GetVar (interp, "::stloptions.resthminedgelenenable", 0));\r
+- }\r
+- };\r
+-\r
+-\r
+-\r
+-\r
+- int Ng_SetOCCVisParameters (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+-#ifdef OCCGEOMETRY\r
+- int showvolume;\r
+- OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());\r
+-\r
+- showvolume = atoi (Tcl_GetVar (interp, "::occoptions.showvolumenr", 0));\r
+-\r
+- if (occgeometry)\r
+- if (showvolume != vispar.occshowvolumenr)\r
+- {\r
+- if (showvolume < 0 || showvolume > occgeometry->NrSolids())\r
+- {\r
+- char buf[20];\r
+- sprintf (buf, "%5i", vispar.occshowvolumenr);\r
+- Tcl_SetVar (interp, "::occoptions.showvolumenr", buf, 0);\r
+- }\r
+- else\r
+- {\r
+- vispar.occshowvolumenr = showvolume;\r
+- if (occgeometry)\r
+- occgeometry -> changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- }\r
+- \r
+- int temp;\r
+-\r
+- temp = atoi (Tcl_GetVar (interp, "::occoptions.visproblemfaces", 0));\r
+-\r
+- if ((bool) temp != vispar.occvisproblemfaces)\r
+- {\r
+- vispar.occvisproblemfaces = temp;\r
+- if (occgeometry)\r
+- occgeometry -> changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+-\r
+- vispar.occshowsurfaces = atoi (Tcl_GetVar (interp, "::occoptions.showsurfaces", 0));\r
+- vispar.occshowedges = atoi (Tcl_GetVar (interp, "::occoptions.showedges", 0));\r
+- vispar.occzoomtohighlightedentity = atoi (Tcl_GetVar (interp, "::occoptions.zoomtohighlightedentity", 0));\r
+- vispar.occdeflection = pow(10.0,-1-atof (Tcl_GetVar (interp, "::occoptions.deflection", 0)));\r
+-\r
+-#endif\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-#ifdef ACIS\r
+- vispar.ACISshowfaces = atoi (Tcl_GetVar (interp, "::occoptions.showsurfaces", 0));\r
+- vispar.ACISshowedges = atoi (Tcl_GetVar (interp, "::occoptions.showedges", 0));\r
+- vispar.ACISshowsolidnr = atoi (Tcl_GetVar (interp, "::occoptions.showsolidnr", 0));\r
+- vispar.ACISshowsolidnr2 = atoi (Tcl_GetVar (interp, "::occoptions.showsolidnr2", 0));\r
+-\r
+-#endif\r
+-\r
+-\r
+-\r
+- return TCL_OK;\r
+- } \r
+-\r
+-\r
+-\r
+-\r
+- int Ng_GetOCCData (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+-#ifdef OCCGEOMETRY\r
+- OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());\r
+-\r
+- static char buf[1000];\r
+- buf[0] = 0;\r
+- stringstream str;\r
+-\r
+- if (argc >= 2)\r
+- {\r
+- if (strcmp (argv[1], "getentities") == 0)\r
+- {\r
+- if (occgeometry)\r
+- {\r
+- occgeometry->GetTopologyTree(str);\r
+- }\r
+- }\r
+- }\r
+-\r
+- Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);\r
+-\r
+-#endif\r
+- return TCL_OK;\r
+- }\r
+-\r
+- \r
+-\r
+- int Ng_OCCCommand (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+-#ifdef OCCGEOMETRY\r
+- OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());\r
+-\r
+- stringstream str;\r
+- if (argc >= 2)\r
+- {\r
+- if (strcmp (argv[1], "isoccgeometryloaded") == 0)\r
+- {\r
+- if (occgeometry)\r
+- str << "1 " << flush;\r
+- else str << "0 " << flush;\r
+-\r
+- Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);\r
+- }\r
+- if (occgeometry)\r
+- {\r
+- if (strcmp (argv[1], "buildvisualizationmesh") == 0)\r
+- {\r
+- occgeometry->BuildVisualizationMesh(vispar.occdeflection);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[1], "mesherror") == 0)\r
+- {\r
+- if (occgeometry->ErrorInSurfaceMeshing())\r
+- str << 1;\r
+- else\r
+- str << 0;\r
+- }\r
+- if (strcmp (argv[1], "sewfaces") == 0)\r
+- {\r
+- cout << "Before operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->SewFaces();\r
+- occgeometry->BuildFMap();\r
+- cout << endl << "After operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->BuildVisualizationMesh(vispar.occdeflection);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[1], "makesolid") == 0)\r
+- {\r
+- cout << "Before operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->MakeSolid();\r
+- occgeometry->BuildFMap();\r
+- cout << endl << "After operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->BuildVisualizationMesh(vispar.occdeflection);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[1], "upgradetopology") == 0)\r
+- {\r
+- cout << "Before operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->SewFaces();\r
+- occgeometry->MakeSolid();\r
+- occgeometry->BuildFMap();\r
+- cout << endl << "After operation:" << endl;\r
+- occgeometry->PrintNrShapes();\r
+- occgeometry->BuildVisualizationMesh(vispar.occdeflection);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[1], "shapehealing") == 0)\r
+- {\r
+- occgeometry->tolerance =\r
+- atof (Tcl_GetVar (interp, "::occoptions.tolerance", 0));\r
+- occgeometry->fixsmalledges =\r
+- atoi (Tcl_GetVar (interp, "::occoptions.fixsmalledges", 0));\r
+- occgeometry->fixspotstripfaces =\r
+- atoi (Tcl_GetVar (interp, "::occoptions.fixspotstripfaces", 0));\r
+- occgeometry->sewfaces =\r
+- atoi (Tcl_GetVar (interp, "::occoptions.sewfaces", 0));\r
+- occgeometry->makesolids =\r
+- atoi (Tcl_GetVar (interp, "::occoptions.makesolids", 0));\r
+- occgeometry->splitpartitions =\r
+- atoi (Tcl_GetVar (interp, "::occoptions.splitpartitions", 0));\r
+-\r
+- // cout << "Before operation:" << endl;\r
+- // occgeometry->PrintNrShapes();\r
+- occgeometry->HealGeometry();\r
+- occgeometry->BuildFMap();\r
+- // cout << endl << "After operation:" << endl;\r
+- // occgeometry->PrintNrShapes();\r
+- occgeometry->BuildVisualizationMesh(vispar.occdeflection);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+-\r
+-\r
+- if (strcmp (argv[1], "highlightentity") == 0)\r
+- {\r
+- if (strcmp (argv[2], "Face") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- occgeometry->fvispar[nr-1].Highlight();\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[2], "Shell") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Highlight();\r
+- }\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[2], "Solid") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Highlight();\r
+- }\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- /*\r
+- if (strcmp (argv[2], "CompSolid") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->cmap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Highlight();\r
+- }\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- */\r
+-\r
+- if (strcmp (argv[2], "Edge") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- occgeometry->evispar[nr-1].Highlight();\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- if (strcmp (argv[2], "Wire") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));\r
+- occgeometry->evispar[i-1].Highlight();\r
+- }\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+-\r
+- if (strcmp (argv[2], "Vertex") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->LowLightAll();\r
+-\r
+- occgeometry->vvispar[nr-1].Highlight();\r
+- if (vispar.occzoomtohighlightedentity)\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;\r
+- else\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+-\r
+- }\r
+-\r
+-\r
+-\r
+- if (strcmp (argv[1], "show") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+-\r
+- if (strcmp (argv[2], "Face") == 0)\r
+- {\r
+- occgeometry->fvispar[nr-1].Show();\r
+- }\r
+- if (strcmp (argv[2], "Shell") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Show();\r
+- }\r
+- }\r
+- if (strcmp (argv[2], "Solid") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Show();\r
+- }\r
+- }\r
+- if (strcmp (argv[2], "Edge") == 0)\r
+- {\r
+- occgeometry->evispar[nr-1].Show();\r
+- }\r
+- if (strcmp (argv[2], "Wire") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));\r
+- occgeometry->evispar[i-1].Show();\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+- if (strcmp (argv[1], "hide") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+-\r
+- if (strcmp (argv[2], "Face") == 0)\r
+- {\r
+- occgeometry->fvispar[nr-1].Hide();\r
+- }\r
+- if (strcmp (argv[2], "Shell") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Hide();\r
+- }\r
+- }\r
+- if (strcmp (argv[2], "Solid") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));\r
+- occgeometry->fvispar[i-1].Hide();\r
+- }\r
+- }\r
+- if (strcmp (argv[2], "Edge") == 0)\r
+- {\r
+- occgeometry->evispar[nr-1].Hide();\r
+- }\r
+- if (strcmp (argv[2], "Wire") == 0)\r
+- {\r
+- TopExp_Explorer exp;\r
+- for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);\r
+- exp.More(); exp.Next())\r
+- {\r
+- int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));\r
+- occgeometry->evispar[i-1].Hide();\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- if (strcmp (argv[1], "findsmallentities") == 0)\r
+- {\r
+- stringstream str("");\r
+- occgeometry->CheckIrregularEntities(str);\r
+- Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);\r
+- }\r
+- if (strcmp (argv[1], "getunmeshedfaceinfo") == 0)\r
+- {\r
+- occgeometry->GetUnmeshedFaceInfo(str);\r
+- Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);\r
+- }\r
+- if (strcmp (argv[1], "getnotdrawablefaces") == 0)\r
+- {\r
+- occgeometry->GetNotDrawableFaces(str);\r
+- Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);\r
+- }\r
+- if (strcmp (argv[1], "redrawstatus") == 0)\r
+- {\r
+- int i = atoi (argv[2]);\r
+- occgeometry->changed = i;\r
+- }\r
+- if (strcmp (argv[1], "swaporientation") == 0)\r
+- {\r
+- IGESControl_Writer writer("millimeters", 1);\r
+- writer.AddShape (occgeometry->shape);\r
+- writer.Write ("1.igs");\r
+- /*\r
+- int nr = atoi (argv[3]);\r
+-\r
+- // const_cast<TopoDS_Shape&> (occgeometry->fmap(nr)).Reverse();\r
+-\r
+- Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;\r
+- rebuild->Apply(occgeometry->shape);\r
+-\r
+- TopoDS_Shape sh;\r
+-\r
+- // if (strcmp (argv[2], "CompSolid") == 0) sh = occgeometry->cmap(nr);\r
+- if (strcmp (argv[2], "Solid") == 0) sh = occgeometry->somap(nr);\r
+- if (strcmp (argv[2], "Shell") == 0) sh = occgeometry->shmap(nr);\r
+- if (strcmp (argv[2], "Face") == 0) sh = occgeometry->fmap(nr);\r
+- if (strcmp (argv[2], "Wire") == 0) sh = occgeometry->wmap(nr);\r
+- if (strcmp (argv[2], "Edge") == 0) sh = occgeometry->emap(nr);\r
+-\r
+- rebuild->Replace(sh, sh.Reversed(), Standard_False);\r
+-\r
+- TopoDS_Shape newshape = rebuild->Apply(occgeometry->shape, TopAbs_SHELL, 1);\r
+- occgeometry->shape = newshape;\r
+-\r
+- occgeometry->BuildFMap();\r
+- occgeometry->BuildVisualizationMesh();\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- */\r
+- }\r
+- if (strcmp (argv[1], "marksingular") == 0)\r
+- {\r
+- int nr = atoi (argv[3]);\r
+- cout << "marking " << argv[2] << " " << nr << endl;\r
+- char buf[2]; buf[0] = '0'; buf[1] = 0;\r
+- bool sing = false;\r
+- if (strcmp (argv[2], "Face") == 0)\r
+- sing = occgeometry->fsingular[nr-1] = !occgeometry->fsingular[nr-1];\r
+- if (strcmp (argv[2], "Edge") == 0)\r
+- sing = occgeometry->esingular[nr-1] = !occgeometry->esingular[nr-1];\r
+- if (strcmp (argv[2], "Vertex") == 0)\r
+- sing = occgeometry->vsingular[nr-1] = !occgeometry->vsingular[nr-1];\r
+-\r
+- if (sing) buf[0] = '1';\r
+-\r
+- Tcl_SetVar (interp, "::ismarkedsingular", buf, 0);\r
+-\r
+- stringstream str;\r
+- occgeometry->GetTopologyTree (str);\r
+-\r
+- char* cstr = (char*)str.str().c_str();\r
+-\r
+- (*testout) << cstr << endl;\r
+-\r
+- char helpstr[1000];\r
+-\r
+- while (strchr (cstr, '}'))\r
+- {\r
+- strncpy (helpstr, cstr+2, strlen(strchr(cstr+2, '}')));\r
+- (*testout) << "***" << cstr << "***" << endl;\r
+- cstr = strchr (cstr, '}');\r
+- } \r
+- }\r
+- }\r
+- }\r
+-\r
+-#endif\r
+- return TCL_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-#ifdef OCCGEOMETRY\r
+- /*\r
+- void OCCConstructGeometry (OCCGeometry & geom);\r
+-\r
+- int Ng_OCCConstruction (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+- if (occgeometry)\r
+- OCCConstructGeometry (*occgeometry);\r
+- return TCL_OK;\r
+- }\r
+- */\r
+-#endif\r
+-\r
+-\r
+-\r
+-\r
+- // Philippose - 30/01/2009\r
+- // TCL interface function for the Local Face Mesh size\r
+- // definition functionality\r
+- int Ng_SurfaceMeshSize (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+-#ifdef OCCGEOMETRY\r
+-\r
+- static char buf[100];\r
+-\r
+- if (argc < 2)\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize needs arguments", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());\r
+- if (!occgeometry)\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize currently supports only OCC (STEP/IGES) Files", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- // Update the face mesh sizes to reflect the global maximum mesh size\r
+- for(int i = 1; i <= occgeometry->NrFaces(); i++)\r
+- {\r
+- if(!occgeometry->GetFaceMaxhModified(i))\r
+- {\r
+- occgeometry->SetFaceMaxH(i, mparam.maxh);\r
+- } \r
+- }\r
+-\r
+- if (strcmp (argv[1], "setsurfms") == 0)\r
+- {\r
+- int facenr = atoi (argv[2]);\r
+- double surfms = atof (argv[3]);\r
+- if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())\r
+- occgeometry->SetFaceMaxH(facenr, surfms);\r
+-\r
+- }\r
+-\r
+- if (strcmp (argv[1], "setall") == 0)\r
+- {\r
+- double surfms = atof (argv[2]);\r
+- if (occgeometry)\r
+- {\r
+- int nrFaces = occgeometry->NrFaces();\r
+- for (int i = 1; i <= nrFaces; i++)\r
+- occgeometry->SetFaceMaxH(i, surfms);\r
+- }\r
+- }\r
+-\r
+- if (strcmp (argv[1], "getsurfms") == 0)\r
+- {\r
+- int facenr = atoi (argv[2]);\r
+- if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())\r
+- {\r
+- sprintf (buf, "%5.2f", occgeometry->GetFaceMaxH(facenr));\r
+- }\r
+- else\r
+- {\r
+- sprintf (buf, "%5.2f", mparam.maxh);\r
+- }\r
+- Tcl_SetResult (interp, buf, TCL_STATIC);\r
+- }\r
+-\r
+- if (strcmp (argv[1], "getactive") == 0)\r
+- {\r
+- sprintf (buf, "%d", occgeometry->SelectedFace());\r
+- Tcl_SetResult (interp, buf, TCL_STATIC);\r
+- }\r
+-\r
+- if (strcmp (argv[1], "setactive") == 0)\r
+- {\r
+- int facenr = atoi (argv[2]);\r
+- if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())\r
+- {\r
+- occgeometry->SetSelectedFace (facenr);\r
+-\r
+- occgeometry->LowLightAll();\r
+- occgeometry->fvispar[facenr-1].Highlight();\r
+- occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;\r
+- }\r
+- }\r
+-\r
+- if (strcmp (argv[1], "getnfd") == 0)\r
+- {\r
+- if (occgeometry)\r
+- sprintf (buf, "%d", occgeometry->NrFaces());\r
+- else\r
+- sprintf (buf, "0");\r
+- Tcl_SetResult (interp, buf, TCL_STATIC);\r
+- }\r
+- return TCL_OK;\r
+-#else // No OCCGEOMETRY \r
+-\r
+- Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize currently supports only OCC (STEP/IGES) Files", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- \r
+-#endif // OCCGEOMETRY\r
+- }\r
+-\r
+-\r
+-\r
+- // Philippose - 25/07/2010\r
+- // TCL interface function for extracting and eventually \r
+- // setting or editing the current colours present in the mesh\r
+- int Ng_CurrentFaceColours (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+- if(argc < 1)\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_GetCurrentFaceColours needs arguments", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- if(!mesh.Ptr())\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_GetCurrentFaceColours: Valid netgen mesh required...please mesh the Geometry first", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- if(strcmp(argv[1], "getcolours") == 0)\r
+- {\r
+- stringstream outVar;\r
+- Array<Vec3d> face_colours;\r
+- GetFaceColours(*mesh, face_colours);\r
+-\r
+- for(int i = 0; i < face_colours.Size();i++)\r
+- {\r
+- outVar << "{ " << face_colours[i].X(1)\r
+- << " " << face_colours[i].X(2)\r
+- << " " << face_colours[i].X(3)\r
+- << " } ";\r
+- }\r
+-\r
+- tcl_const char * valuevar = argv[2];\r
+- Tcl_SetVar (interp, valuevar, (char*)outVar.str().c_str(), 0);\r
+- }\r
+-\r
+- if(strcmp(argv[1], "showalso") == 0)\r
+- {\r
+- Array<Vec3d> face_colours;\r
+- GetFaceColours(*mesh,face_colours);\r
+-\r
+- int colourind = atoi (argv[2]);\r
+-\r
+- for(int i = 1; i <= mesh->GetNFD(); i++)\r
+- {\r
+- Array<SurfaceElementIndex> surfElems;\r
+- mesh->GetSurfaceElementsOfFace(i,surfElems);\r
+-\r
+- if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(1);\r
+- }\r
+- }\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- if(strcmp(argv[1], "hidealso") == 0)\r
+- {\r
+- Array<Vec3d> face_colours;\r
+- GetFaceColours(*mesh,face_colours);\r
+-\r
+- int colourind = atoi (argv[2]);\r
+-\r
+- for(int i = 1; i <= mesh->GetNFD(); i++)\r
+- {\r
+- Array<SurfaceElementIndex> surfElems;\r
+- mesh->GetSurfaceElementsOfFace(i,surfElems);\r
+-\r
+- if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(0);\r
+- }\r
+- }\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- if(strcmp(argv[1], "showonly") == 0)\r
+- {\r
+- Array<Vec3d> face_colours;\r
+- GetFaceColours(*mesh,face_colours);\r
+-\r
+- int colourind = atoi (argv[2]);\r
+-\r
+- for(int i = 1; i <= mesh->GetNFD(); i++)\r
+- {\r
+- Array<SurfaceElementIndex> surfElems;\r
+- mesh->GetSurfaceElementsOfFace(i,surfElems);\r
+-\r
+- if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(1);\r
+- }\r
+- }\r
+- else\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(0);\r
+- }\r
+- }\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- if(strcmp(argv[1], "hideonly") == 0)\r
+- {\r
+- Array<Vec3d> face_colours;\r
+- GetFaceColours(*mesh,face_colours);\r
+-\r
+- int colourind = atoi (argv[2]);\r
+-\r
+- for(int i = 1; i <= mesh->GetNFD(); i++)\r
+- {\r
+- Array<SurfaceElementIndex> surfElems;\r
+- mesh->GetSurfaceElementsOfFace(i,surfElems);\r
+-\r
+- if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(0);\r
+- }\r
+- }\r
+- else\r
+- {\r
+- for(int j = 0; j < surfElems.Size(); j++)\r
+- {\r
+- mesh->SurfaceElement(surfElems[j]).Visible(1);\r
+- }\r
+- }\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- if(strcmp(argv[1], "showall") == 0)\r
+- {\r
+- for(int i = 1; i <= mesh->GetNSE(); i++)\r
+- {\r
+- mesh->SurfaceElement(i).Visible(1);\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- if(strcmp(argv[1], "hideall") == 0)\r
+- {\r
+- for(int i = 1; i <= mesh->GetNSE(); i++)\r
+- {\r
+- mesh->SurfaceElement(i).Visible(0);\r
+- }\r
+-\r
+- mesh->SetNextTimeStamp();\r
+- }\r
+-\r
+- return TCL_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Philippose - 10/03/2009\r
+- // TCL interface function for the Automatic Colour-based\r
+- // definition of boundary conditions for OCC Geometry\r
+- int Ng_AutoColourBcProps (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+- if(argc < 1)\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_AutoColourBcProps needs arguments", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- if(!mesh.Ptr())\r
+- {\r
+- Tcl_SetResult (interp, (char *)"Ng_AutoColourBcProps: Valid netgen mesh required...please mesh the Geometry first", TCL_STATIC);\r
+- return TCL_ERROR;\r
+- }\r
+-\r
+- if(strcmp(argv[1], "auto") == 0)\r
+- {\r
+- AutoColourBcProps(*mesh, 0);\r
+- }\r
+-\r
+- if(strcmp(argv[1], "profile") == 0)\r
+- {\r
+- AutoColourBcProps(*mesh, argv[2]);\r
+- }\r
+-\r
+- return TCL_OK;\r
+- }\r
+-\r
+-\r
+- int Ng_SetOCCParameters (ClientData clientData,\r
+- Tcl_Interp * interp,\r
+- int argc, tcl_const char *argv[])\r
+- {\r
+- OCCGeometryRegister reg;\r
+- reg.SetParameters (interp);\r
+- /*\r
+- occparam.resthcloseedgefac =\r
+- atof (Tcl_GetVar (interp, "::stloptions.resthcloseedgefac", 0));\r
+-\r
+- occparam.resthcloseedgeenable =\r
+- atoi (Tcl_GetVar (interp, "::stloptions.resthcloseedgeenable", 0));\r
+- */\r
+- return TCL_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- NetgenGeometry * OCCGeometryRegister :: Load (string filename) const\r
+- {\r
+- const char * lgfilename = filename.c_str();\r
+-\r
+-\r
+- /*\r
+- if (strcmp (&cfilename[strlen(cfilename)-3], "geo") == 0)\r
+- {\r
+- PrintMessage (1, "Load OCCG geometry file ", cfilename);\r
+- \r
+- extern OCCGeometry * ParseOCCG (istream & istr);\r
+-\r
+- ifstream infile(cfilename);\r
+-\r
+- OCCGeometry * hgeom = ParseOCCG (infile);\r
+- if (!hgeom)\r
+- throw NgException ("geo-file should start with 'algebraic3d'");\r
+-\r
+- hgeom -> FindIdenticSurfaces(1e-8 * hgeom->MaxSize()); \r
+- return hgeom;\r
+- }\r
+- */\r
+-\r
+-\r
+- if ((strcmp (&lgfilename[strlen(lgfilename)-4], "iges") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-3], "igs") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-3], "IGS") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-4], "IGES") == 0))\r
+- {\r
+- PrintMessage (1, "Load IGES geometry file ", lgfilename);\r
+- OCCGeometry * occgeometry = LoadOCC_IGES (lgfilename);\r
+- return occgeometry;\r
+- }\r
+-\r
+- else if ((strcmp (&lgfilename[strlen(lgfilename)-4], "step") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-3], "stp") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-3], "STP") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-4], "STEP") == 0))\r
+- {\r
+- PrintMessage (1, "Load STEP geometry file ", lgfilename);\r
+- OCCGeometry * occgeometry = LoadOCC_STEP (lgfilename);\r
+- return occgeometry; \r
+- }\r
+- else if ((strcmp (&lgfilename[strlen(lgfilename)-4], "brep") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-4], "Brep") == 0) ||\r
+- (strcmp (&lgfilename[strlen(lgfilename)-4], "BREP") == 0))\r
+- {\r
+- PrintMessage (1, "Load BREP geometry file ", lgfilename);\r
+- OCCGeometry * occgeometry = LoadOCC_BREP (lgfilename);\r
+- return occgeometry;\r
+- }\r
+- \r
+- return NULL;\r
+- }\r
+-\r
+-\r
+- static VisualSceneOCCGeometry vsoccgeom;\r
+-\r
+- VisualScene * OCCGeometryRegister :: GetVisualScene (const NetgenGeometry * geom) const\r
+- {\r
+- OCCGeometry * geometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());\r
+- if (geometry)\r
+- {\r
+- vsoccgeom.SetGeometry (geometry);\r
+- return &vsoccgeom;\r
+- }\r
+- return NULL;\r
+- }\r
+-\r
+-\r
+-\r
+-}\r
+-\r
+-\r
+-\r
+-using namespace netgen;\r
+-\r
+-int Ng_occ_Init (Tcl_Interp * interp)\r
+-{\r
+- geometryregister.Append (new OCCGeometryRegister);\r
+-\r
+-\r
+- Tcl_CreateCommand (interp, "Ng_SetOCCVisParameters",\r
+- Ng_SetOCCVisParameters,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+- Tcl_CreateCommand (interp, "Ng_GetOCCData",\r
+- Ng_GetOCCData,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+- /*\r
+-#ifdef OCCGEOMETRY\r
+- Tcl_CreateCommand (interp, "Ng_OCCConstruction",\r
+- Ng_OCCConstruction,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-#endif\r
+- */\r
+-\r
+- Tcl_CreateCommand (interp, "Ng_OCCCommand",\r
+- Ng_OCCCommand,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+-\r
+- Tcl_CreateCommand (interp, "Ng_SetOCCParameters", Ng_SetOCCParameters,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+-\r
+-\r
+- // Philippose - 30/01/2009\r
+- // Register the TCL Interface Command for local face mesh size\r
+- // definition\r
+- Tcl_CreateCommand (interp, "Ng_SurfaceMeshSize", Ng_SurfaceMeshSize,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+- Tcl_CreateCommand (interp, "Ng_AutoColourBcProps", Ng_AutoColourBcProps,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+- // Philippose - 25/07/2010\r
+- // Register the TCL Interface Command for handling the face colours \r
+- // present in the mesh\r
+- Tcl_CreateCommand(interp, "Ng_CurrentFaceColours", Ng_CurrentFaceColours,\r
+- (ClientData)NULL,\r
+- (Tcl_CmdDeleteProc*) NULL);\r
+-\r
+-\r
+- return TCL_OK;\r
+-}\r
+-\r
+-#endif\r
+-\r
++#ifdef OCCGEOMETRY
++
++#include <mystdlib.h>
++#include <myadt.hpp>
++#include <linalg.hpp>
++#include <csg.hpp>
++#include <occgeom.hpp>
++
++
++#include <incvis.hpp>
++#include <visual.hpp>
++
++#include "../meshing/bcfunctions.hpp"
++
++#include "vsocc.hpp"
++
++
++extern "C" int Ng_occ_Init (Tcl_Interp * interp);
++
++
++
++namespace netgen
++{
++ extern AutoPtr<NetgenGeometry> ng_geometry;
++ extern AutoPtr<Mesh> mesh;
++
++ char * err_needsoccgeometry = (char*) "This operation needs an OCC geometry";
++ extern char * err_needsmesh;
++ extern char * err_jobrunning;
++
++
++
++
++ class OCCGeometryRegister : public GeometryRegister
++ {
++ public:
++ virtual NetgenGeometry * Load (string filename) const;
++ virtual VisualScene * GetVisualScene (const NetgenGeometry * geom) const;
++
++ virtual void SetParameters (Tcl_Interp * interp)
++ {
++ occparam.resthcloseedgefac =
++ atof (Tcl_GetVar (interp, "::stloptions.resthcloseedgefac", 0));
++ occparam.resthcloseedgeenable =
++ atoi (Tcl_GetVar (interp, "::stloptions.resthcloseedgeenable", 0));
++ occparam.resthminedgelen =
++ atof (Tcl_GetVar (interp, "::stloptions.resthminedgelen", 0));
++ occparam.resthminedgelenenable =
++ atoi (Tcl_GetVar (interp, "::stloptions.resthminedgelenenable", 0));
++ }
++ };
++
++
++
++
++ int Ng_SetOCCVisParameters (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++#ifdef OCCGEOMETRY
++ int showvolume;
++ OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());
++
++ showvolume = atoi (Tcl_GetVar (interp, "::occoptions.showvolumenr", 0));
++
++ if (occgeometry)
++ if (showvolume != vispar.occshowvolumenr)
++ {
++ if (showvolume < 0 || showvolume > occgeometry->NrSolids())
++ {
++ char buf[20];
++ sprintf (buf, "%5i", vispar.occshowvolumenr);
++ Tcl_SetVar (interp, "::occoptions.showvolumenr", buf, 0);
++ }
++ else
++ {
++ vispar.occshowvolumenr = showvolume;
++ if (occgeometry)
++ occgeometry -> changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ }
++
++ int temp;
++
++ temp = atoi (Tcl_GetVar (interp, "::occoptions.visproblemfaces", 0));
++
++ if ((bool) temp != vispar.occvisproblemfaces)
++ {
++ vispar.occvisproblemfaces = temp;
++ if (occgeometry)
++ occgeometry -> changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++
++ vispar.occshowsurfaces = atoi (Tcl_GetVar (interp, "::occoptions.showsurfaces", 0));
++ vispar.occshowedges = atoi (Tcl_GetVar (interp, "::occoptions.showedges", 0));
++ vispar.occzoomtohighlightedentity = atoi (Tcl_GetVar (interp, "::occoptions.zoomtohighlightedentity", 0));
++ vispar.occdeflection = pow(10.0,-1-atof (Tcl_GetVar (interp, "::occoptions.deflection", 0)));
++
++#endif
++
++
++
++
++
++#ifdef ACIS
++ vispar.ACISshowfaces = atoi (Tcl_GetVar (interp, "::occoptions.showsurfaces", 0));
++ vispar.ACISshowedges = atoi (Tcl_GetVar (interp, "::occoptions.showedges", 0));
++ vispar.ACISshowsolidnr = atoi (Tcl_GetVar (interp, "::occoptions.showsolidnr", 0));
++ vispar.ACISshowsolidnr2 = atoi (Tcl_GetVar (interp, "::occoptions.showsolidnr2", 0));
++
++#endif
++
++
++
++ return TCL_OK;
++ }
++
++
++
++
++ int Ng_GetOCCData (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++#ifdef OCCGEOMETRY
++ OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());
++
++ static char buf[1000];
++ buf[0] = 0;
++ stringstream str;
++
++ if (argc >= 2)
++ {
++ if (strcmp (argv[1], "getentities") == 0)
++ {
++ if (occgeometry)
++ {
++ occgeometry->GetTopologyTree(str);
++ }
++ }
++ }
++
++ Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);
++
++#endif
++ return TCL_OK;
++ }
++
++
++
++ int Ng_OCCCommand (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++#ifdef OCCGEOMETRY
++ OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());
++
++ stringstream str;
++ if (argc >= 2)
++ {
++ if (strcmp (argv[1], "isoccgeometryloaded") == 0)
++ {
++ if (occgeometry)
++ str << "1 " << flush;
++ else str << "0 " << flush;
++
++ Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);
++ }
++ if (occgeometry)
++ {
++ if (strcmp (argv[1], "buildvisualizationmesh") == 0)
++ {
++ occgeometry->BuildVisualizationMesh(vispar.occdeflection);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[1], "mesherror") == 0)
++ {
++ if (occgeometry->ErrorInSurfaceMeshing())
++ str << 1;
++ else
++ str << 0;
++ }
++ if (strcmp (argv[1], "sewfaces") == 0)
++ {
++ cout << "Before operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->SewFaces();
++ occgeometry->BuildFMap();
++ cout << endl << "After operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->BuildVisualizationMesh(vispar.occdeflection);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[1], "makesolid") == 0)
++ {
++ cout << "Before operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->MakeSolid();
++ occgeometry->BuildFMap();
++ cout << endl << "After operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->BuildVisualizationMesh(vispar.occdeflection);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[1], "upgradetopology") == 0)
++ {
++ cout << "Before operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->SewFaces();
++ occgeometry->MakeSolid();
++ occgeometry->BuildFMap();
++ cout << endl << "After operation:" << endl;
++ occgeometry->PrintNrShapes();
++ occgeometry->BuildVisualizationMesh(vispar.occdeflection);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[1], "shapehealing") == 0)
++ {
++ occgeometry->tolerance =
++ atof (Tcl_GetVar (interp, "::occoptions.tolerance", 0));
++ occgeometry->fixsmalledges =
++ atoi (Tcl_GetVar (interp, "::occoptions.fixsmalledges", 0));
++ occgeometry->fixspotstripfaces =
++ atoi (Tcl_GetVar (interp, "::occoptions.fixspotstripfaces", 0));
++ occgeometry->sewfaces =
++ atoi (Tcl_GetVar (interp, "::occoptions.sewfaces", 0));
++ occgeometry->makesolids =
++ atoi (Tcl_GetVar (interp, "::occoptions.makesolids", 0));
++ occgeometry->splitpartitions =
++ atoi (Tcl_GetVar (interp, "::occoptions.splitpartitions", 0));
++
++ // cout << "Before operation:" << endl;
++ // occgeometry->PrintNrShapes();
++ occgeometry->HealGeometry();
++ occgeometry->BuildFMap();
++ // cout << endl << "After operation:" << endl;
++ // occgeometry->PrintNrShapes();
++ occgeometry->BuildVisualizationMesh(vispar.occdeflection);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++
++
++ if (strcmp (argv[1], "highlightentity") == 0)
++ {
++ if (strcmp (argv[2], "Face") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ occgeometry->fvispar[nr-1].Highlight();
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[2], "Shell") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Highlight();
++ }
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[2], "Solid") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Highlight();
++ }
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ /*
++ if (strcmp (argv[2], "CompSolid") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->cmap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Highlight();
++ }
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ */
++
++ if (strcmp (argv[2], "Edge") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ occgeometry->evispar[nr-1].Highlight();
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ if (strcmp (argv[2], "Wire") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));
++ occgeometry->evispar[i-1].Highlight();
++ }
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++
++ if (strcmp (argv[2], "Vertex") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->LowLightAll();
++
++ occgeometry->vvispar[nr-1].Highlight();
++ if (vispar.occzoomtohighlightedentity)
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONFULLCHANGE;
++ else
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++
++ }
++
++
++
++ if (strcmp (argv[1], "show") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++
++ if (strcmp (argv[2], "Face") == 0)
++ {
++ occgeometry->fvispar[nr-1].Show();
++ }
++ if (strcmp (argv[2], "Shell") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Show();
++ }
++ }
++ if (strcmp (argv[2], "Solid") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Show();
++ }
++ }
++ if (strcmp (argv[2], "Edge") == 0)
++ {
++ occgeometry->evispar[nr-1].Show();
++ }
++ if (strcmp (argv[2], "Wire") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));
++ occgeometry->evispar[i-1].Show();
++ }
++ }
++ }
++
++
++ if (strcmp (argv[1], "hide") == 0)
++ {
++ int nr = atoi (argv[3]);
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++
++ if (strcmp (argv[2], "Face") == 0)
++ {
++ occgeometry->fvispar[nr-1].Hide();
++ }
++ if (strcmp (argv[2], "Shell") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->shmap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Hide();
++ }
++ }
++ if (strcmp (argv[2], "Solid") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->somap(nr), TopAbs_FACE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->fmap.FindIndex (TopoDS::Face(exp.Current()));
++ occgeometry->fvispar[i-1].Hide();
++ }
++ }
++ if (strcmp (argv[2], "Edge") == 0)
++ {
++ occgeometry->evispar[nr-1].Hide();
++ }
++ if (strcmp (argv[2], "Wire") == 0)
++ {
++ TopExp_Explorer exp;
++ for (exp.Init (occgeometry->wmap(nr), TopAbs_EDGE);
++ exp.More(); exp.Next())
++ {
++ int i = occgeometry->emap.FindIndex (TopoDS::Edge(exp.Current()));
++ occgeometry->evispar[i-1].Hide();
++ }
++ }
++ }
++
++
++
++ if (strcmp (argv[1], "findsmallentities") == 0)
++ {
++ stringstream str("");
++ occgeometry->CheckIrregularEntities(str);
++ Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);
++ }
++ if (strcmp (argv[1], "getunmeshedfaceinfo") == 0)
++ {
++ occgeometry->GetUnmeshedFaceInfo(str);
++ Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);
++ }
++ if (strcmp (argv[1], "getnotdrawablefaces") == 0)
++ {
++ occgeometry->GetNotDrawableFaces(str);
++ Tcl_SetResult (interp, (char*)str.str().c_str(), TCL_VOLATILE);
++ }
++ if (strcmp (argv[1], "redrawstatus") == 0)
++ {
++ int i = atoi (argv[2]);
++ occgeometry->changed = i;
++ }
++ if (strcmp (argv[1], "swaporientation") == 0)
++ {
++ IGESControl_Writer writer("millimeters", 1);
++ writer.AddShape (occgeometry->shape);
++ writer.Write ("1.igs");
++ /*
++ int nr = atoi (argv[3]);
++
++ // const_cast<TopoDS_Shape&> (occgeometry->fmap(nr)).Reverse();
++
++ Handle_ShapeBuild_ReShape rebuild = new ShapeBuild_ReShape;
++ rebuild->Apply(occgeometry->shape);
++
++ TopoDS_Shape sh;
++
++ // if (strcmp (argv[2], "CompSolid") == 0) sh = occgeometry->cmap(nr);
++ if (strcmp (argv[2], "Solid") == 0) sh = occgeometry->somap(nr);
++ if (strcmp (argv[2], "Shell") == 0) sh = occgeometry->shmap(nr);
++ if (strcmp (argv[2], "Face") == 0) sh = occgeometry->fmap(nr);
++ if (strcmp (argv[2], "Wire") == 0) sh = occgeometry->wmap(nr);
++ if (strcmp (argv[2], "Edge") == 0) sh = occgeometry->emap(nr);
++
++ rebuild->Replace(sh, sh.Reversed());
++
++ TopoDS_Shape newshape = rebuild->Apply(occgeometry->shape, TopAbs_SHELL, 1);
++ occgeometry->shape = newshape;
++
++ occgeometry->BuildFMap();
++ occgeometry->BuildVisualizationMesh();
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ */
++ }
++ if (strcmp (argv[1], "marksingular") == 0)
++ {
++ int nr = atoi (argv[3]);
++ cout << "marking " << argv[2] << " " << nr << endl;
++ char buf[2]; buf[0] = '0'; buf[1] = 0;
++ bool sing = false;
++ if (strcmp (argv[2], "Face") == 0)
++ sing = occgeometry->fsingular[nr-1] = !occgeometry->fsingular[nr-1];
++ if (strcmp (argv[2], "Edge") == 0)
++ sing = occgeometry->esingular[nr-1] = !occgeometry->esingular[nr-1];
++ if (strcmp (argv[2], "Vertex") == 0)
++ sing = occgeometry->vsingular[nr-1] = !occgeometry->vsingular[nr-1];
++
++ if (sing) buf[0] = '1';
++
++ Tcl_SetVar (interp, "::ismarkedsingular", buf, 0);
++
++ stringstream str;
++ occgeometry->GetTopologyTree (str);
++
++ char* cstr = (char*)str.str().c_str();
++
++ (*testout) << cstr << endl;
++
++ char helpstr[1000];
++
++ while (strchr (cstr, '}'))
++ {
++ strncpy (helpstr, cstr+2, strlen(strchr(cstr+2, '}')));
++ (*testout) << "***" << cstr << "***" << endl;
++ cstr = strchr (cstr, '}');
++ }
++ }
++ }
++ }
++
++#endif
++ return TCL_OK;
++ }
++
++
++
++#ifdef OCCGEOMETRY
++ /*
++ void OCCConstructGeometry (OCCGeometry & geom);
++
++ int Ng_OCCConstruction (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++ if (occgeometry)
++ OCCConstructGeometry (*occgeometry);
++ return TCL_OK;
++ }
++ */
++#endif
++
++
++
++
++ // Philippose - 30/01/2009
++ // TCL interface function for the Local Face Mesh size
++ // definition functionality
++ int Ng_SurfaceMeshSize (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++#ifdef OCCGEOMETRY
++
++ static char buf[100];
++
++ if (argc < 2)
++ {
++ Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize needs arguments", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ OCCGeometry * occgeometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());
++ if (!occgeometry)
++ {
++ Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize currently supports only OCC (STEP/IGES) Files", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ // Update the face mesh sizes to reflect the global maximum mesh size
++ for(int i = 1; i <= occgeometry->NrFaces(); i++)
++ {
++ if(!occgeometry->GetFaceMaxhModified(i))
++ {
++ occgeometry->SetFaceMaxH(i, mparam.maxh);
++ }
++ }
++
++ if (strcmp (argv[1], "setsurfms") == 0)
++ {
++ int facenr = atoi (argv[2]);
++ double surfms = atof (argv[3]);
++ if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())
++ occgeometry->SetFaceMaxH(facenr, surfms);
++
++ }
++
++ if (strcmp (argv[1], "setall") == 0)
++ {
++ double surfms = atof (argv[2]);
++ if (occgeometry)
++ {
++ int nrFaces = occgeometry->NrFaces();
++ for (int i = 1; i <= nrFaces; i++)
++ occgeometry->SetFaceMaxH(i, surfms);
++ }
++ }
++
++ if (strcmp (argv[1], "getsurfms") == 0)
++ {
++ int facenr = atoi (argv[2]);
++ if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())
++ {
++ sprintf (buf, "%5.2f", occgeometry->GetFaceMaxH(facenr));
++ }
++ else
++ {
++ sprintf (buf, "%5.2f", mparam.maxh);
++ }
++ Tcl_SetResult (interp, buf, TCL_STATIC);
++ }
++
++ if (strcmp (argv[1], "getactive") == 0)
++ {
++ sprintf (buf, "%d", occgeometry->SelectedFace());
++ Tcl_SetResult (interp, buf, TCL_STATIC);
++ }
++
++ if (strcmp (argv[1], "setactive") == 0)
++ {
++ int facenr = atoi (argv[2]);
++ if (occgeometry && facenr >= 1 && facenr <= occgeometry->NrFaces())
++ {
++ occgeometry->SetSelectedFace (facenr);
++
++ occgeometry->LowLightAll();
++ occgeometry->fvispar[facenr-1].Highlight();
++ occgeometry->changed = OCCGEOMETRYVISUALIZATIONHALFCHANGE;
++ }
++ }
++
++ if (strcmp (argv[1], "getnfd") == 0)
++ {
++ if (occgeometry)
++ sprintf (buf, "%d", occgeometry->NrFaces());
++ else
++ sprintf (buf, "0");
++ Tcl_SetResult (interp, buf, TCL_STATIC);
++ }
++ return TCL_OK;
++#else // No OCCGEOMETRY
++
++ Tcl_SetResult (interp, (char *)"Ng_SurfaceMeshSize currently supports only OCC (STEP/IGES) Files", TCL_STATIC);
++ return TCL_ERROR;
++
++#endif // OCCGEOMETRY
++ }
++
++
++
++ // Philippose - 25/07/2010
++ // TCL interface function for extracting and eventually
++ // setting or editing the current colours present in the mesh
++ int Ng_CurrentFaceColours (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++ if(argc < 1)
++ {
++ Tcl_SetResult (interp, (char *)"Ng_GetCurrentFaceColours needs arguments", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ if(!mesh.Ptr())
++ {
++ Tcl_SetResult (interp, (char *)"Ng_GetCurrentFaceColours: Valid netgen mesh required...please mesh the Geometry first", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ if(strcmp(argv[1], "getcolours") == 0)
++ {
++ stringstream outVar;
++ Array<Vec3d> face_colours;
++ GetFaceColours(*mesh, face_colours);
++
++ for(int i = 0; i < face_colours.Size();i++)
++ {
++ outVar << "{ " << face_colours[i].X(1)
++ << " " << face_colours[i].X(2)
++ << " " << face_colours[i].X(3)
++ << " } ";
++ }
++
++ tcl_const char * valuevar = argv[2];
++ Tcl_SetVar (interp, valuevar, (char*)outVar.str().c_str(), 0);
++ }
++
++ if(strcmp(argv[1], "showalso") == 0)
++ {
++ Array<Vec3d> face_colours;
++ GetFaceColours(*mesh,face_colours);
++
++ int colourind = atoi (argv[2]);
++
++ for(int i = 1; i <= mesh->GetNFD(); i++)
++ {
++ Array<SurfaceElementIndex> surfElems;
++ mesh->GetSurfaceElementsOfFace(i,surfElems);
++
++ if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(1);
++ }
++ }
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ if(strcmp(argv[1], "hidealso") == 0)
++ {
++ Array<Vec3d> face_colours;
++ GetFaceColours(*mesh,face_colours);
++
++ int colourind = atoi (argv[2]);
++
++ for(int i = 1; i <= mesh->GetNFD(); i++)
++ {
++ Array<SurfaceElementIndex> surfElems;
++ mesh->GetSurfaceElementsOfFace(i,surfElems);
++
++ if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(0);
++ }
++ }
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ if(strcmp(argv[1], "showonly") == 0)
++ {
++ Array<Vec3d> face_colours;
++ GetFaceColours(*mesh,face_colours);
++
++ int colourind = atoi (argv[2]);
++
++ for(int i = 1; i <= mesh->GetNFD(); i++)
++ {
++ Array<SurfaceElementIndex> surfElems;
++ mesh->GetSurfaceElementsOfFace(i,surfElems);
++
++ if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(1);
++ }
++ }
++ else
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(0);
++ }
++ }
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ if(strcmp(argv[1], "hideonly") == 0)
++ {
++ Array<Vec3d> face_colours;
++ GetFaceColours(*mesh,face_colours);
++
++ int colourind = atoi (argv[2]);
++
++ for(int i = 1; i <= mesh->GetNFD(); i++)
++ {
++ Array<SurfaceElementIndex> surfElems;
++ mesh->GetSurfaceElementsOfFace(i,surfElems);
++
++ if(ColourMatch(face_colours[colourind],mesh->GetFaceDescriptor(i).SurfColour()))
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(0);
++ }
++ }
++ else
++ {
++ for(int j = 0; j < surfElems.Size(); j++)
++ {
++ mesh->SurfaceElement(surfElems[j]).Visible(1);
++ }
++ }
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ if(strcmp(argv[1], "showall") == 0)
++ {
++ for(int i = 1; i <= mesh->GetNSE(); i++)
++ {
++ mesh->SurfaceElement(i).Visible(1);
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ if(strcmp(argv[1], "hideall") == 0)
++ {
++ for(int i = 1; i <= mesh->GetNSE(); i++)
++ {
++ mesh->SurfaceElement(i).Visible(0);
++ }
++
++ mesh->SetNextTimeStamp();
++ }
++
++ return TCL_OK;
++ }
++
++
++
++
++ // Philippose - 10/03/2009
++ // TCL interface function for the Automatic Colour-based
++ // definition of boundary conditions for OCC Geometry
++ int Ng_AutoColourBcProps (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++ if(argc < 1)
++ {
++ Tcl_SetResult (interp, (char *)"Ng_AutoColourBcProps needs arguments", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ if(!mesh.Ptr())
++ {
++ Tcl_SetResult (interp, (char *)"Ng_AutoColourBcProps: Valid netgen mesh required...please mesh the Geometry first", TCL_STATIC);
++ return TCL_ERROR;
++ }
++
++ if(strcmp(argv[1], "auto") == 0)
++ {
++ AutoColourBcProps(*mesh, 0);
++ }
++
++ if(strcmp(argv[1], "profile") == 0)
++ {
++ AutoColourBcProps(*mesh, argv[2]);
++ }
++
++ return TCL_OK;
++ }
++
++
++ int Ng_SetOCCParameters (ClientData clientData,
++ Tcl_Interp * interp,
++ int argc, tcl_const char *argv[])
++ {
++ OCCGeometryRegister reg;
++ reg.SetParameters (interp);
++ /*
++ occparam.resthcloseedgefac =
++ atof (Tcl_GetVar (interp, "::stloptions.resthcloseedgefac", 0));
++
++ occparam.resthcloseedgeenable =
++ atoi (Tcl_GetVar (interp, "::stloptions.resthcloseedgeenable", 0));
++ */
++ return TCL_OK;
++ }
++
++
++
++
++ NetgenGeometry * OCCGeometryRegister :: Load (string filename) const
++ {
++ const char * lgfilename = filename.c_str();
++
++
++ /*
++ if (strcmp (&cfilename[strlen(cfilename)-3], "geo") == 0)
++ {
++ PrintMessage (1, "Load OCCG geometry file ", cfilename);
++
++ extern OCCGeometry * ParseOCCG (istream & istr);
++
++ ifstream infile(cfilename);
++
++ OCCGeometry * hgeom = ParseOCCG (infile);
++ if (!hgeom)
++ throw NgException ("geo-file should start with 'algebraic3d'");
++
++ hgeom -> FindIdenticSurfaces(1e-8 * hgeom->MaxSize());
++ return hgeom;
++ }
++ */
++
++
++ if ((strcmp (&lgfilename[strlen(lgfilename)-4], "iges") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-3], "igs") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-3], "IGS") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-4], "IGES") == 0))
++ {
++ PrintMessage (1, "Load IGES geometry file ", lgfilename);
++ OCCGeometry * occgeometry = LoadOCC_IGES (lgfilename);
++ return occgeometry;
++ }
++
++ else if ((strcmp (&lgfilename[strlen(lgfilename)-4], "step") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-3], "stp") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-3], "STP") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-4], "STEP") == 0))
++ {
++ PrintMessage (1, "Load STEP geometry file ", lgfilename);
++ OCCGeometry * occgeometry = LoadOCC_STEP (lgfilename);
++ return occgeometry;
++ }
++ else if ((strcmp (&lgfilename[strlen(lgfilename)-4], "brep") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-4], "Brep") == 0) ||
++ (strcmp (&lgfilename[strlen(lgfilename)-4], "BREP") == 0))
++ {
++ PrintMessage (1, "Load BREP geometry file ", lgfilename);
++ OCCGeometry * occgeometry = LoadOCC_BREP (lgfilename);
++ return occgeometry;
++ }
++
++ return NULL;
++ }
++
++
++ static VisualSceneOCCGeometry vsoccgeom;
++
++ VisualScene * OCCGeometryRegister :: GetVisualScene (const NetgenGeometry * geom) const
++ {
++ OCCGeometry * geometry = dynamic_cast<OCCGeometry*> (ng_geometry.Ptr());
++ if (geometry)
++ {
++ vsoccgeom.SetGeometry (geometry);
++ return &vsoccgeom;
++ }
++ return NULL;
++ }
++
++
++
++}
++
++
++
++using namespace netgen;
++
++int Ng_occ_Init (Tcl_Interp * interp)
++{
++ geometryregister.Append (new OCCGeometryRegister);
++
++
++ Tcl_CreateCommand (interp, "Ng_SetOCCVisParameters",
++ Ng_SetOCCVisParameters,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++ Tcl_CreateCommand (interp, "Ng_GetOCCData",
++ Ng_GetOCCData,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++ /*
++#ifdef OCCGEOMETRY
++ Tcl_CreateCommand (interp, "Ng_OCCConstruction",
++ Ng_OCCConstruction,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++#endif
++ */
++
++ Tcl_CreateCommand (interp, "Ng_OCCCommand",
++ Ng_OCCCommand,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++
++ Tcl_CreateCommand (interp, "Ng_SetOCCParameters", Ng_SetOCCParameters,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++
++
++ // Philippose - 30/01/2009
++ // Register the TCL Interface Command for local face mesh size
++ // definition
++ Tcl_CreateCommand (interp, "Ng_SurfaceMeshSize", Ng_SurfaceMeshSize,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++ Tcl_CreateCommand (interp, "Ng_AutoColourBcProps", Ng_AutoColourBcProps,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++ // Philippose - 25/07/2010
++ // Register the TCL Interface Command for handling the face colours
++ // present in the mesh
++ Tcl_CreateCommand(interp, "Ng_CurrentFaceColours", Ng_CurrentFaceColours,
++ (ClientData)NULL,
++ (Tcl_CmdDeleteProc*) NULL);
++
++
++ return TCL_OK;
++}
++
++#endif
++
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/occ/utilities.h netgen-5.3.1_SRC_modif/libsrc/occ/utilities.h
+--- netgen-5.3.1_SRC_orig/libsrc/occ/utilities.h 2014-08-29 13:54:03.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/occ/utilities.h 2019-11-14 16:56:23.394424656 +0300
+@@ -33,6 +33,7 @@
+
+ #include <string>
+ #include <iostream>
++#include <iomanip>
+ #include <cstdlib>
+ // #include "SALOME_Log.hxx"
+
+diff -Naur netgen-5.3.1_SRC_orig/libsrc/stlgeom/Makefile.am netgen-5.3.1_SRC_modif/libsrc/stlgeom/Makefile.am
+--- netgen-5.3.1_SRC_orig/libsrc/stlgeom/Makefile.am 2014-08-29 13:54:05.000000000 +0400
++++ netgen-5.3.1_SRC_modif/libsrc/stlgeom/Makefile.am 2019-11-14 16:56:21.230485226 +0300
+@@ -4,10 +4,10 @@
+ AM_CPPFLAGS = -I$(top_srcdir)/libsrc/include $(TCL_INCLUDES)
+ METASOURCES = AUTO
+
+-lib_LTLIBRARIES = libstl.la
++noinst_LTLIBRARIES = libstl.la
+
+ if NGGUI
+-lib_LTLIBRARIES += libstlvis.la
++lib_LTLIBRARIES = libstlvis.la
+ endif
+
+ libstl_la_SOURCES = meshstlsurface.cpp stlgeom.cpp stlgeomchart.cpp \
+@@ -16,6 +16,5 @@
+
+ libstlvis_la_SOURCES = stlpkg.cpp vsstl.cpp
+ libstlvis_la_LIBADD = libstl.la
+-libstl_la_LIBADD = $(top_builddir)/libsrc/meshing/libmesh.la
+ # libstlvis_la_LIBADD = libstl.la $(top_builddir)/libsrc/linalg/libla.la
+
+diff -Naur netgen-5.3.1_SRC_orig/ng/menustat.tcl netgen-5.3.1_SRC_modif/ng/menustat.tcl
+--- netgen-5.3.1_SRC_orig/ng/menustat.tcl 2014-08-29 13:54:01.000000000 +0400
++++ netgen-5.3.1_SRC_modif/ng/menustat.tcl 2019-11-14 16:56:26.574335643 +0300
+@@ -1,1123 +1,1123 @@
+-# netgen menus:\r
+-\r
+-menu .ngmenu -tearoff 0 -relief raised -bd 2\r
+-. configure -menu .ngmenu\r
+-\r
+-.ngmenu add cascade -label "File" -menu .ngmenu.file -underline 0\r
+-.ngmenu add cascade -label "Geometry" -menu .ngmenu.geometry -underline 0\r
+-.ngmenu add cascade -label "Mesh" -menu .ngmenu.mesh -underline 0\r
+-.ngmenu add cascade -label "View" -menu .ngmenu.view -underline 0\r
+-.ngmenu add cascade -label "Refinement" -menu .ngmenu.meshsize -underline 5\r
+-\r
+-if { $userlevel == 3} {\r
+- .ngmenu add cascade -label "Special" -menu .ngmenu.special -underline 3\r
+-}\r
+-\r
+-.ngmenu add cascade -label "Help" -menu .ngmenu.help -underline 0\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu File #\r
+-# #\r
+-#####################################################\r
+-\r
+-menu .ngmenu.file\r
+-\r
+-.ngmenu.file add command -label "Load Geometry..." -accelerator "<l><g>" \\r
+- -command { \r
+- set types {\r
+- {"All Geometry types" { .stl .stlb .step .stp .geo .in2d .igs .iges .brep .sat} }\r
+- {"IGES Geometry" {.igs .iges} }\r
+- {"BREP OpenCascade Geometry" {.brep} }\r
+- {"STL Geometry" {.stl} }\r
+- {"Binary STL Geometry" {.stlb} }\r
+- {"STEP Geometry" {.step .stp} }\r
+- {"Geometry file" {.geo} }\r
+- {"2D Geometry" {.in2d } } \r
+- } \r
+-\r
+- set ACISavailable [Ng_ACISCommand isACISavailable]\r
+- if {$ACISavailable == "yes" } {\r
+- lappend types {"ACIS Geometry" {.sat} }\r
+- }\r
+-\r
+- if {[catch {\r
+- set file [tk_getOpenFile -filetypes $types -initialdir $dirname -typevariable loadgeomtypevar]\r
+- }]} {\r
+- set file [tk_getOpenFile -filetypes $types -initialdir $dirname]\r
+- }\r
+-\r
+- if {$file != ""} {\r
+- AddRecentFile $file\r
+- Ng_LoadGeometry $file \r
+- Ng_ParseGeometry\r
+-# if { [Ng_STLInfo status]=="ERROR" } {\r
+-# tk_messageBox -message "STL ERROR: \n [Ng_STLInfo statustext]" -type ok\r
+-# }\r
+- set selectvisual geometry\r
+- Ng_SetVisParameters\r
+- redraw\r
+- wm title . [concat "$progname - " $file]\r
+- set dirname [file dirname $file]\r
+- set basefilename [file tail [file rootname $file]]\r
+-\r
+- if { $hasocc == "yes" } {\r
+- rebuildoccdialog\r
+- }\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-.ngmenu.file add command -label "Save Geometry..." \\r
+- -command { \r
+- set occgeometryloaded [Ng_OCCCommand isoccgeometryloaded]\r
+- puts $occgeometryloaded\r
+- if {$occgeometryloaded == 1 } {\r
+- set types {\r
+- {"IGES Geometry file" {.igs} } \r
+- {"STEP Geometry file" {.stp} } \r
+- {"STL Geometry file" {.stl} } \r
+- {"STL BIN Geometry file" {.stlb} } \r
+- }\r
+- } {\r
+- set types {\r
+- {"STL Geometry file" {.stl} } \r
+- {"STL BIN Geometry file" {.stlb} } \r
+- }\r
+- }\r
+-\r
+- set ACISavailable [Ng_ACISCommand isACISavailable]\r
+- puts $ACISavailable\r
+- if {$ACISavailable == "yes" } {\r
+- lappend types {"ACIS Geometry" {.sat} }\r
+- }\r
+-\r
+- set file [tk_getSaveFile -filetypes $types -initialdir $dirname -initialfile $basefilename ]\r
+- if {$file != ""} {\r
+- Ng_SaveGeometry $file \r
+- }\r
+- }\r
+- \r
+-\r
+-\r
+-.ngmenu.file add cascade -label "Recent Files" -menu .ngmenu.file.recent \r
+-menu .ngmenu.file.recent\r
+-\r
+-\r
+-proc AddRecentFile { filename } {\r
+- global progname\r
+- global dirname\r
+- catch { [.ngmenu.file.recent delete $filename] }\r
+- .ngmenu.file.recent insert 0 command -label $filename \\r
+- -command "AddRecentFile {$filename}; \r
+- Ng_LoadGeometry {$filename}; \r
+- Ng_ParseGeometry;\r
+- set selectvisual geometry;\r
+- Ng_SetVisParameters;\r
+- redraw;\r
+- wm title . [concat \" $progname - $filename \"];\r
+- set dirname {[file dirname $filename]};\r
+- set basefilename {[file tail [file rootname $filename]]};\r
+- rebuildoccdialog;"\r
+-\r
+- \r
+- if { [.ngmenu.file.recent index last] >= 6 } {\r
+- .ngmenu.file.recent delete last }\r
+- \r
+- saveinifile;\r
+- }\r
+-loadinifile;\r
+-\r
+-.ngmenu.file add separator\r
+-\r
+-\r
+-.ngmenu.file add command -label "Load Mesh..." -accelerator "<l><m>" \\r
+- -command {\r
+- set types {\r
+- {"Mesh file" {.vol .vol.gz} } }\r
+- set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]\r
+- if {$file != ""} {\r
+- AddRecentMeshFile $file;\r
+- Ng_LoadMesh $file; \r
+- set selectvisual mesh\r
+- Ng_SetVisParameters\r
+- redraw\r
+- Ng_ReadStatus; \r
+-# Ng_MeshSizeFromSurfaceMesh\r
+- wm title . [concat "$progname - " $file] \r
+- set dirname [file dirname $file]\r
+- set basefilename [file tail [file rootname $file]]\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-# astrid\r
+-.ngmenu.file add cascade -label "Recent Meshes" -menu .ngmenu.file.recentmesh \r
+-menu .ngmenu.file.recentmesh\r
+-\r
+-\r
+-proc AddRecentMeshFile { filename } {\r
+- global progname\r
+- global dirname\r
+- catch { [.ngmenu.file.recentmesh delete $filename] }\r
+- .ngmenu.file.recentmesh insert 0 command -label $filename \\r
+- -command "AddRecentMeshFile {$filename}; \r
+- Ng_LoadMesh {$filename};\r
+- set selectvisual mesh;\r
+- Ng_SetVisParameters;\r
+- redraw;\r
+- wm title . [concat \" $progname - $filename \"];\r
+- set dirname {[file dirname $filename]};\r
+- set basefilename {[file tail [file rootname $filename]]};\r
+- rebuildoccdialog;"\r
+- \r
+- if { [.ngmenu.file.recentmesh index last] >= 6 } {\r
+- .ngmenu.file.recentmesh delete last }\r
+- \r
+- savemeshinifile;\r
+- }\r
+-loadmeshinifile;\r
+-\r
+-# astrid ende\r
+-\r
+-\r
+-.ngmenu.file add command -label "Save Mesh..." -accelerator "<s><m>" \\r
+- -command {\r
+- set types {\r
+- {"Mesh file" {.vol .vol.gz} } }\r
+-\r
+- set file [tk_getSaveFile -filetypes $types -defaultextension ".vol.gz" -initialfile $basefilename -initialdir $dirname ]\r
+- if {$file != ""} {\r
+- Ng_SaveMesh $file }\r
+- AddRecentMeshFile $file;\r
+-\r
+- }\r
+-\r
+-.ngmenu.file add command -label "Merge Mesh..." \\r
+- -command {\r
+- set types {\r
+- {"Mesh file" {.vol} } }\r
+- set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]\r
+- if {$file != ""} {\r
+- Ng_MergeMesh $file; \r
+- set selectvisual mesh\r
+- Ng_SetVisParameters\r
+- redraw\r
+- Ng_ReadStatus; \r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-.ngmenu.file add command -label "Import Mesh..." \\r
+- -command { \r
+- set types {\r
+- {"Neutral format" {.mesh .emt} }\r
+- {"Surface mesh format" {.surf} }\r
+- {"Universal format" {.unv} }\r
+- {"Olaf format" {.emt} }\r
+- {"TET format" {.tet} }\r
+- {"Pro/ENGINEER neutral format" {.fnf} }\r
+- }\r
+- set file [tk_getOpenFile -filetypes $types ]\r
+- if {$file != ""} {\r
+- Ng_ImportMesh $file \r
+- set selectvisual mesh\r
+- Ng_SetVisParameters\r
+- redraw\r
+- Ng_ReadStatus; \r
+- }\r
+- }\r
+-\r
+-\r
+-.ngmenu.file add command -label "Export Mesh..." \\r
+- -command {\r
+-\r
+-# global meshexportformats\r
+- foreach exportformat $meshexportformats {\r
+- if { [lindex $exportformat 0] == $exportfiletype } {\r
+- set extension [lindex $exportformat 1]\r
+- }\r
+- }\r
+-\r
+- if { $exportfiletype == "Elmer Format"} {\r
+- set file [file nativename [tk_chooseDirectory -title "Elmer Mesh Export - Select Directory"]]\r
+- } elseif { $exportfiletype == "OpenFOAM 1.5+ Format"} {\r
+- set file [file nativename [tk_chooseDirectory -title "OpenFOAM 1.5+ Mesh Export - Select Case Directory"]]\r
+- } elseif { $exportfiletype == "OpenFOAM 1.5+ Compressed"} {\r
+- set file [file nativename [tk_chooseDirectory -title "OpenFOAM 1.5+ Mesh Export - Select Case Directory"]]\r
+- } else {\r
+-# set file [tk_getSaveFile -filetypes "{ \"$exportfiletype\" {$extension} }" ]\r
+- set file [tk_getSaveFile -filetypes "{ \"$exportfiletype\" {*}}" ]\r
+- }\r
+-\r
+- if {$file != ""} {\r
+- Ng_ExportMesh $file $exportfiletype \r
+- }\r
+- }\r
+-\r
+-.ngmenu.file add cascade -label "Export Filetype" -menu .ngmenu.file.filetype \r
+-\r
+-menu .ngmenu.file.filetype \r
+-\r
+-\r
+-.ngmenu.file add separator\r
+-\r
+-\r
+-.ngmenu.file add command -label "Save Solution..." \\r
+- -command { \r
+- set types { \r
+- {"Solution File" {.sol} } \r
+- {"VTK File" {.vtk} } \r
+- }\r
+- set file [tk_getSaveFile -filetypes $types ]\r
+- if {$file != ""} {\r
+- Ng_SaveSolution $file \r
+- }\r
+- }\r
+-#-defaultextension ".sol" ]\r
+-\r
+-.ngmenu.file add command -label "Import Solution..." \\r
+- -command { \r
+- set types { {"Solution File" {.sol} } }\r
+- set file [tk_getOpenFile -filetypes $types -defaultextension ".sol" ]\r
+- if {$file != ""} {\r
+- Ng_ImportSolution $file \r
+- set selectvisual solution\r
+- Ng_SetVisParameters\r
+- redraw\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-set demostarttime [clock clicks -millisecond]\r
+-set stopdemo 0\r
+-proc demoredraw { } {\r
+- global demostarttime\r
+- global stopdemo\r
+- set curtime [clock clicks -millisecond]\r
+- set result [ Ng_DemoSetTime [expr $curtime - $demostarttime] ]\r
+- redraw\r
+- global videoactive\r
+- if { $videoactive == 1 } {\r
+- puts "addframe"\r
+- .ndraw Ng_VideoClip addframe\r
+- }\r
+- if { $result == 0 && $stopdemo == 0 } {\r
+- after 1 { demoredraw }\r
+- }\r
+-}\r
+-.ngmenu.file add command -label "Show Demo..." \\r
+- -command {\r
+- set types { {"Demo File" {.dem} } }\r
+- set file [tk_getOpenFile -filetypes $types -defaultextension ".dem" ]\r
+- if {$file != ""} {\r
+- Ng_ShowDemo $file \r
+- set demostarttime [clock clicks -millisecond]\r
+- set stopdemo 0\r
+- demoredraw\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-.ngmenu.file add separator\r
+-\r
+-.ngmenu.file add command -label "Snapshot..." \\r
+- -command { \r
+- set types { \r
+- {"JPG file" {.jpg} } \r
+- {"GIF file" {.gif} } \r
+- {"PPM file" {.ppm} } \r
+- }\r
+- set file [tk_getSaveFile -filetypes $types]\r
+-# -defaultextension ".ppm"]\r
+- if {$file != ""} {\r
+- .ndraw Ng_SnapShot $file }\r
+- }\r
+-\r
+-\r
+-.ngmenu.file add cascade -label "Video clip" -menu .ngmenu.file.video\r
+-menu .ngmenu.file.video\r
+-\r
+-set videoactive 0\r
+-.ngmenu.file.video add command -label "start..." \\r
+- -command { \r
+- set types { \r
+- {"MPG file" {.mpg} } \r
+- }\r
+- set file [tk_getSaveFile -filetypes $types]\r
+- if {$file != ""} {\r
+- .ndraw Ng_VideoClip init $file \r
+- global videoactive\r
+- set videoactive 1\r
+- }\r
+- }\r
+-\r
+-.ngmenu.file.video add command -label "add frame..." \\r
+- -command {.ndraw Ng_VideoClip addframe }\r
+-\r
+-.ngmenu.file.video add command -label "one cycle" \\r
+- -command {\r
+- set visoptions.redrawperiodic 1\r
+- for { set j 0 } { $j < 100 } { incr j } {\r
+- puts "j = $j"\r
+- Ng_Vis_Set time [expr (1000 * $j / 100)]\r
+- redraw\r
+- .ndraw Ng_VideoClip addframe \r
+- after 200\r
+- }\r
+- }\r
+-\r
+-.ngmenu.file.video add command -label "finalize..." \\r
+- -command {\r
+- .ndraw Ng_VideoClip finalize \r
+- global videoactive\r
+- set videoactive 0\r
+- }\r
+-\r
+-\r
+-\r
+-.ngmenu.file add command -label "Save Options" \\r
+- -command { saveoptions }\r
+-\r
+-\r
+- \r
+-\r
+-.ngmenu.file add separator\r
+-\r
+-\r
+-## herbert tcl load menue\r
+-# .ngmenu.file add command -label "Run tests ..." \\r
+-\# -command { runtestdialog }\r
+-##\r
+-# .ngmenu.file add separator\r
+-\r
+-.ngmenu.file add command -label "Quit" -accelerator "<q>" \\r
+- -command { \r
+- puts "Thank you for using $progname"; \r
+-\r
+- if { [catch { unload libngsolve[info sharedlibextension] ngsolve } result ] } {\r
+- # puts "cannot unload ngsolve" \r
+- # puts "error: $result"\r
+- } \r
+-\r
+- Ng_Exit; \r
+- destroy . \r
+- }\r
+-# exit\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu Mesh #\r
+-# #\r
+-#####################################################\r
+-\r
+-menu .ngmenu.mesh\r
+-.ngmenu.mesh add command -label "Generate Mesh" -accelerator "<g><m>" \\r
+- -command { \r
+- set selectvisual mesh\r
+- Ng_SetVisParameters\r
+- Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}\r
+- Ng_ReadStatus\r
+- redraw\r
+- }\r
+-\r
+-.ngmenu.mesh add command -label "Stop Meshing" \\r
+- -command { Ng_StopMeshing }\r
+-\r
+-.ngmenu.mesh add command -label "Meshing Options..." \\r
+- -command meshingoptionsdialog\r
+-\r
+-\r
+-.ngmenu.mesh add separator\r
+-\r
+-.ngmenu.mesh add command -label "Delete Mesh" \\r
+- -command { Ng_New mesh; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.mesh add command -label "Delete Vol Mesh" \\r
+- -command { Ng_DeleteVolMesh; Ng_ReadStatus; redraw }\r
+-\r
+-\r
+-.ngmenu.mesh add command -label "Mesh Info" \\r
+- -command {\r
+- set dim [Ng_MeshInfo dim]\r
+- set np [Ng_MeshInfo np]\r
+- set ne [Ng_MeshInfo ne]\r
+- set nse [Ng_MeshInfo nse]\r
+- set nseg [Ng_MeshInfo nseg]\r
+- set bbox [Ng_MeshInfo bbox]\r
+- tk_messageBox -message "Dimension: $dim\nPoints: $np\nElements: $ne\nSurface Els: $nse\nSegments: $nseg\nxmin [lindex $bbox 0] xmax [lindex $bbox 1]\nymin [lindex $bbox 2] ymax [lindex $bbox 3]\nzmin [lindex $bbox 4] zmax [lindex $bbox 5]"\r
+- }\r
+-\r
+-\r
+-.ngmenu.mesh add command -label "Mesh Quality" \\r
+- -command {\r
+- set inplanemin 0\r
+- set inplanemax 0\r
+- set betplanemin 0\r
+- set betplanemax 0\r
+- Ng_MeshQuality inplanemin inplanemax betplanemin betplanemax\r
+- puts "Triangle angles : $inplanemin - $inplanemax"\r
+- puts "Tet angles : $betplanemin - $betplanemax"\r
+- tk_messageBox -message "Triangle angles : $inplanemin - $inplanemax \n Tet angles : $betplanemin - $betplanemax"\r
+- }\r
+-\r
+-# .ngmenu.mesh add command -label "Quality Plot" \\r
+-# -command { qualityviewdialog 1 }\r
+-\r
+-\r
+-\r
+-\r
+-.ngmenu.mesh add command -label "Check Surface Mesh" \\r
+- -command { Ng_CheckSurfaceMesh }\r
+-.ngmenu.mesh add command -label "Check Volume Mesh" \\r
+- -command { Ng_CheckVolumeMesh }\r
+-\r
+-.ngmenu.mesh add command -label "Edit Boundary Conditions..." \\r
+- -command { bcpropdialog }\r
+-\r
+-if { $userlevel == 3 } {\r
+- .ngmenu.mesh add command -label "Mesh Doctor..." \\r
+- -command { meshdoctordialog }\r
+-}\r
+-\r
+-.ngmenu.mesh add command -label "METIS Mesh Partitioning..." \\r
+- -command { METISdialog }\r
+-\r
+-.ngmenu.mesh add separator\r
+-\r
+-.ngmenu.mesh add command -label "Analyze Geometry" \\r
+- -command { Ng_GenerateMesh ag ag; Ng_ReadStatus; redraw }\r
+-.ngmenu.mesh add command -label "Mesh Edges" \\r
+- -command { Ng_GenerateMesh me me; Ng_ReadStatus; redraw }\r
+-.ngmenu.mesh add command -label "Mesh Surface" \\r
+- -command { set selectvisual mesh; Ng_SetVisParameters; \\r
+- Ng_GenerateMesh ms ms; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.mesh add command -label "Optimize Surface" \\r
+- -command { Ng_GenerateMesh os os cmsmSm; redraw }\r
+-\r
+-.ngmenu.mesh add cascade -label "Surface Optim. Step" -menu .ngmenu.mesh.surfoptstep \r
+-\r
+-menu .ngmenu.mesh.surfoptstep \r
+-.ngmenu.mesh.surfoptstep add command -label "Mesh Smoothing" \\r
+- -command { Ng_GenerateMesh os os m; redraw}\r
+-.ngmenu.mesh.surfoptstep add command -label "Edge swapping (topologic)" \\r
+- -command { Ng_GenerateMesh os os s; redraw}\r
+-.ngmenu.mesh.surfoptstep add command -label "Edge swapping (metric)" \\r
+- -command { Ng_GenerateMesh os os S; redraw}\r
+-.ngmenu.mesh.surfoptstep add command -label "Combine points" \\r
+- -command { Ng_GenerateMesh os os c; redraw}\r
+-\r
+-\r
+-.ngmenu.mesh add separator\r
+-.ngmenu.mesh add command -label "Mesh Volume" \\r
+- -command { Ng_GenerateMesh mv mv; Ng_ReadStatus }\r
+-.ngmenu.mesh add command -label "Optimize Volume" \\r
+- -command { Ng_GenerateMesh ov ov; Ng_ReadStatus }\r
+-.ngmenu.mesh add command -label "Smooth Opt Volume" \\r
+- -command { Ng_GenerateMesh ov ov m; Ng_ReadStatus }\r
+-.ngmenu.mesh add command -label "Smooth Opt Volume Jacobian" \\r
+- -command { Ng_GenerateMesh ov ov j; Ng_ReadStatus }\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu Geometry #\r
+-# #\r
+-#####################################################\r
+-\r
+-menu .ngmenu.geometry\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu View #\r
+-# #\r
+-#####################################################\r
+-\r
+-menu .ngmenu.view\r
+-.ngmenu.view add command -label "Zoom all" \\r
+- -command { Ng_ZoomAll; redraw }\r
+-.ngmenu.view add command -label "Center" \\r
+- -command { Ng_Center; redraw }\r
+-\r
+-.ngmenu.view add command -label "x-y plane" \\r
+- -command { Ng_StandardRotation xy; redraw }\r
+-.ngmenu.view add command -label "y-x plane" \\r
+- -command { Ng_StandardRotation yx; redraw }\r
+-.ngmenu.view add command -label "x-z plane" \\r
+- -command { Ng_StandardRotation xz; redraw }\r
+-.ngmenu.view add command -label "z-x plane" \\r
+- -command { Ng_StandardRotation zx; redraw }\r
+-.ngmenu.view add command -label "y-z plane" \\r
+- -command { Ng_StandardRotation yz; redraw }\r
+-.ngmenu.view add command -label "z-y plane" \\r
+- -command { Ng_StandardRotation zy; redraw }\r
+-\r
+-.ngmenu.view add command -label "Viewing Options..." \\r
+- -command { viewingoptionsdialog; redraw }\r
+-.ngmenu.view add command -label "Clipping Plane..." \\r
+- -command { clippingdialog; redraw }\r
+-.ngmenu.view add command -label "Solution Data..." \\r
+- -command { visual_dialog; redraw }\r
+-.ngmenu.view add checkbutton -variable viewqualityplot \\r
+- -label "Quality Plot" \\r
+- -command { qualityviewdialog $viewqualityplot }\r
+-.ngmenu.view add checkbutton -variable memuseplot \\r
+- -label "Memory Usage" \\r
+- -command { memusedialog $memuseplot }\r
+-\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu Refinement #\r
+-# #\r
+-#####################################################\r
+-#\r
+-# Mesh size menu\r
+-#\r
+-menu .ngmenu.meshsize\r
+-.ngmenu.meshsize add command -label "Refine uniform" \\r
+- -command { Ng_Refine; Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.meshsize add command -label "Second Order" \\r
+- -command { Ng_SecondOrder; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.meshsize add command -label "Validate Second Order" \\r
+- -command { Ng_ValidateSecondOrder; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.meshsize add command -label "High Order" \\r
+- -command { Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.meshsize add separator\r
+-\r
+-.ngmenu.meshsize add command -label "Refinement Dialog..." \\r
+- -command { refinementdialog }\r
+-.ngmenu.meshsize add command -label "Load Meshsize..." \\r
+- -command {\r
+- set types {\r
+- {"Meshsize file" {.msz} } }\r
+- set file [tk_getOpenFile -filetypes $types]\r
+- if {$file != ""} {\r
+- Ng_LoadMeshSize $file; \r
+- }\r
+- }\r
+-.ngmenu.meshsize add command -label "MS from Surf Mesh" \\r
+- -command { Ng_MeshSizeFromSurfaceMesh }\r
+-\r
+-\r
+-if { $userlevel == 3 } {\r
+-.ngmenu.meshsize add command -label "Singular point ms" \\r
+- -command { Ng_SingularPointMS; }\r
+-\r
+-.ngmenu.meshsize add command -label "Singular edge ms" \\r
+- -command { Ng_SingularEdgeMS; }\r
+-\r
+-.ngmenu.meshsize add separator\r
+-\r
+-set bisectfilename "";\r
+-\r
+-.ngmenu.meshsize add command -label "Bisection" \\r
+- -command { Ng_ReadStatus; set oldnp 0; set newnp $status_np; \r
+-# Ng_BisectCopyMesh; \r
+-# Ng_Split2Tets;\r
+- Ng_ReadStatus;\r
+- \r
+- while { $oldnp < $newnp } {\r
+-# if { $level == 0 } {\r
+-# Ng_ExportMesh feppmesh.vol fepp;\r
+-# } {\r
+-# Ng_ExportMesh feppmesh$level feppml \r
+-# }\r
+- set level [expr $level+1]\r
+- if { $bisectfilename == ""} {\r
+- Ng_Bisect;\r
+- } else {\r
+- Ng_Bisect $bisectfilename;\r
+- }\r
+-# Ng_HighOrder ${options.elementorder} "noparallel"\r
+-# Ng_Split2Tets;\r
+- Ng_ReadStatus;\r
+- redraw; \r
+- \r
+- if { $bisectfilename == ""} {\r
+- set oldnp $newnp;\r
+- set newnp $status_np;\r
+- puts "oldnp $oldnp newnp $newnp";\r
+- } else {\r
+- set oldnp $newnp;\r
+- }\r
+- }\r
+- }\r
+-# -command { Ng_Bisect; Ng_ReadStatus; redraw }\r
+-# -command { exec netgen abc >outfile 2>errfile; Ng_ReadStatus; redraw }\r
+-\r
+-}\r
+-\r
+-.ngmenu.meshsize add command -label "Load Refinement Info..." \\r
+- -command {\r
+- set types {\r
+- {"Refinement info" {.refine} }}\r
+- set bisectfilename [tk_getOpenFile -filetypes $types]\r
+- }\r
+-\r
+-.ngmenu.meshsize add command -label "Z-Refinement" \\r
+- -command { Ng_ZRefinement 2; Ng_ReadStatus; redraw }\r
+-\r
+-\r
+-# .ngmenu.meshsize add command -label "hp-Refinement" \\r
+-\# -command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }\r
+-\r
+-.ngmenu.meshsize add cascade -label "hp-Refinement" -menu .ngmenu.meshsize.hpref\r
+-menu .ngmenu.meshsize.hpref\r
+-.ngmenu.meshsize.hpref add command -label "1 Level" \\r
+- -command { Ng_HPRefinement 1; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "2 Levels" \\r
+- -command { Ng_HPRefinement 2; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "3 Levels" \\r
+- -command { Ng_HPRefinement 3; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "4 Levels" \\r
+- -command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "5 Levels" \\r
+- -command { Ng_HPRefinement 5; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "6 Levels" \\r
+- -command { Ng_HPRefinement 6; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "7 Levels" \\r
+- -command { Ng_HPRefinement 7; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "8 Levels" \\r
+- -command { Ng_HPRefinement 8; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "9 Levels" \\r
+- -command { Ng_HPRefinement 9; Ng_ReadStatus; redraw }\r
+-.ngmenu.meshsize.hpref add command -label "10 Levels" \\r
+- -command { Ng_HPRefinement 10; Ng_ReadStatus; redraw }\r
+-\r
+-\r
+-.ngmenu.meshsize add command -label "Split to Tets" \\r
+- -command { Ng_Split2Tets; Ng_ReadStatus; redraw }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu Special #\r
+-# #\r
+-#####################################################\r
+-\r
+-menu .ngmenu.special\r
+-.ngmenu.special add command -label "Prismatic Boundary Layer" \\r
+- -command { Ng_GenerateBoundaryLayer; redraw }\r
+-.ngmenu.special add command -label "Insert virtual boundary layer" \\r
+- -command { Ng_InsertVirtualBL; redraw }\r
+-.ngmenu.special add command -label "Cut off and combine with other" \\r
+- -command { \r
+- set types { {"Mesh file" {.vol} } }\r
+- set file [tk_getOpenFile -filetypes $types]\r
+- if {$file != ""} {\r
+- Ng_CutOffAndCombine $file; }\r
+- redraw \r
+- }\r
+-.ngmenu.special add command -label "Helmholtz Mesh grading" \\r
+- -command { Ng_HelmholtzMesh; }\r
+-.ngmenu.special add cascade -label "Colour-based boundary conditions" -menu .ngmenu.special.colbndcond\r
+-\r
+-menu .ngmenu.special.colbndcond \r
+- .ngmenu.special.colbndcond add command -label "Inspect Colours in mesh" \\r
+- -command { currmeshcoloursdialog }\r
+- \r
+- .ngmenu.special.colbndcond add separator \r
+- \r
+- .ngmenu.special.colbndcond add command -label "Automatic Assignment" \\r
+- -command { Ng_AutoColourBcProps auto; redraw }\r
+- \r
+- .ngmenu.special.colbndcond add separator \r
+-\r
+- set ocffile [file join ${ngdir} netgen.ocf];\r
+- \r
+- .ngmenu.special.colbndcond add command -label "Select Colour Profile file" \\r
+- -command {\r
+- set types { {"Colour Profile file" {.ocf} } }\r
+- set ocffile [tk_getOpenFile -filetypes $types]\r
+- if {$ocffile == ""} {\r
+- set ocffile [file join ${ngdir} netgen.ocf]; }\r
+- } \r
+- .ngmenu.special.colbndcond add command -label "Profile based Assignment" \\r
+- -command { Ng_AutoColourBcProps profile ${ocffile}; redraw }\r
+-\r
+-\r
+-# menu .mbar.stl.menu\r
+-# .mbar.stl.menu add command -label "STL options" \\r
+-# -command { stloptionsdialog; }\r
+-#.mbar.stl.menu add command -label "STL Doctor" \\r
+-# -command { stldoctordialog; }\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Menu Help #\r
+-# #\r
+-#####################################################\r
+-\r
+-\r
+-\r
+-\r
+-menu .ngmenu.help\r
+-# .ngmenu.help add command -label "Ng Help..." \\r
+-\# -command { help_main }\r
+-# .ngmenu.view add checkbutton -variable showsensitivehelp \\r
+-# -label "Sensitve Help" \\r
+-# -command { sensitivehelpdialog $showsensitivehelp }\r
+-.ngmenu.view add checkbutton -label "Help Line" -variable showhelpline \\r
+- -command {\r
+- if { $showhelpline == 1} {\r
+- pack .helpline -before .statbar -side bottom -fill x -padx 3p\r
+- } {\r
+- pack forget .helpline \r
+- }\r
+-} \r
+-\r
+-.ngmenu.help add command -label "About..." \\r
+- -command {\r
+-tk_messageBox -message "This is NETGEN \nmainly written by \nJoachim Schoeberl \nthanks to \nRobert Gaisbauer, Johannes Gerstmayr, Philippose Rajan"\r
+-}\r
+-\r
+-# tk_menuBar .mbar .mbar.file .mbar.mesh .mbar.test .mbar.help\r
+-# focus .mbar\r
+-\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Button bar #\r
+-# #\r
+-#####################################################\r
+-\r
+-frame .bubar -relief raised -bd 2\r
+-pack .bubar -side top -fill x\r
+-\r
+-button .bubar.testb -text "Test" -command { Ng_SaveGeometry }\r
+-button .bubar.surfm -text "Generate Mesh" -command \\r
+- { \r
+- .ngmenu.mesh invoke "Generate Mesh"; \r
+-# set selectvisual mesh; \r
+-# Ng_SetVisParameters;\r
+-# Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}\r
+-# redraw \r
+- }\r
+-button .bubar.stopm -text "Stop" -command \\r
+- { \r
+- # Ng_StopMeshing; \r
+- set multithread_terminate 1;\r
+- set stopdemo 1;\r
+- }\r
+-button .bubar.exitb -text "Quit" \\r
+- -command { \r
+- set ans [tk_messageBox -title "Quit Netgen?" -message "Do you really want to quit Netgen?" -type yesno -default "no" -icon question]\r
+- if { $ans == "yes" } {\r
+- .ngmenu.file invoke "Quit"; \r
+- } \r
+- }\r
+-pack .bubar.exitb .bubar.surfm .bubar.stopm -side left\r
+-\r
+-#button .bubar.scan -text "Scan" \\r
+-# -command { Ng_ParseGeometry; set selectvisual geometry; Ng_SetVisParameters; redraw }\r
+-\r
+-button .bubar.zoomall -text "Zoom All" \\r
+- -command { Ng_ZoomAll; redraw }\r
+-\r
+-button .bubar.center -text "Center" \\r
+- -command { Ng_Center; redraw }\r
+-\r
+-# tk_optionMenu .bubar.modesel drawmode "rotate" "move " "zoom "\r
+-tixOptionMenu .bubar.modesel \\r
+- -options {\r
+- label.width 0\r
+- label.anchor e\r
+- menubutton.width 6\r
+- } \\r
+- -variable drawmode\r
+-\r
+-.bubar.modesel add command rotate -label Rotate\r
+-.bubar.modesel add command move -label Move\r
+-.bubar.modesel add command zoom -label Zoom\r
+-\r
+-\r
+-\r
+-set viewvals { geometry specpoints mesh solution}\r
+-if { $userlevel == 3} {\r
+- set viewvals { geometry mesh specpoints surfmeshing modelview solution}\r
+-}\r
+-\r
+-set viewvallabs(cross) "Cross" \r
+-set viewvallabs(geometry) "Geometry" \r
+-set viewvallabs(mesh) "Mesh" \r
+-set viewvallabs(specpoints) "Edges" \r
+-set viewvallabs(surfmeshing) "Mesh Gen" \r
+-set viewvallabs(modelview) "Modeller" \r
+-set viewvallabs(solution) "Solution" \r
+-\r
+-tixOptionMenu .bubar.selview \\r
+- -options {\r
+- label.width 0\r
+- label.anchor e\r
+- menubutton.width 10\r
+- } \\r
+-\r
+-foreach viewv $viewvals {\r
+- .bubar.selview add command $viewv -label $viewvallabs($viewv)\r
+-}\r
+-\r
+-\r
+-\r
+-.bubar.selview config -variable selectvisual\r
+-.bubar.selview config -command { Ng_SetVisParameters; redraw }\r
+-\r
+-\r
+-pack .bubar.modesel -side right\r
+-pack forget .bubar.modesel\r
+-pack .bubar.center .bubar.zoomall .bubar.selview -side right\r
+-\r
+-.ngmenu.view add checkbutton -variable viewrotatebutton \\r
+- -label "Enable LeftButton Selection" \\r
+- -command { \r
+- if { $viewrotatebutton } {\r
+- pack .bubar.modesel -side right\r
+- } {\r
+- pack forget .bubar.modesel\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-#####################################################\r
+-# #\r
+-# Status bar #\r
+-# #\r
+-#####################################################\r
+-\r
+-label .helpline -text "None"\r
+-pack forget .helpline -side bottom -fill x\r
+-\r
+-frame .statbar -relief flat -bd 2\r
+-pack .statbar -side bottom -fill x\r
+-\r
+-label .statbar.ptslabel -text "Points: "\r
+-label .statbar.ptsval -textvariable status_np\r
+-label .statbar.elslabel -text " Elements: "\r
+-label .statbar.elsval -textvariable status_ne\r
+-label .statbar.selslabel -text " Surf Elements: "\r
+-label .statbar.selsval -textvariable status_nse\r
+-# label .statbar.memlabel -text " Mem: "\r
+-# label .statbar.memval -textvariable mem_moveable\r
+-label .statbar.task -textvariable status_task\r
+-\r
+-pack .statbar.ptslabel .statbar.ptsval -side left -ipady 3p \r
+-pack .statbar.elslabel .statbar.elsval -side left -ipady 3p \r
+-pack .statbar.selslabel .statbar.selsval -side left -ipady 3p\r
+-\r
+-# if { $userlevel == 3 } {\r
+-# pack .statbar.memlabel .statbar.memval -side left -ipady 3p\r
+-# }\r
+-\r
+-\r
+-tixMeter .statbar.per -value 0 -text 0%\r
+-.statbar.per configure -fillcolor blue\r
+-\r
+-pack .statbar.per -side right\r
+-pack .statbar.task -side right -ipady 4\r
+-\r
+-set qualbaraxis(0) 0\r
+-set qualbar(0) 0\r
+-set qualbarnull(0) 0\r
+-\r
+-\r
+-\r
+-proc timer2 { } {\r
+- global status_np\r
+- global status_ne\r
+- global status_nse\r
+- global multithread_running\r
+- global multithread_redraw\r
+- global status_working\r
+- global status_task\r
+- global status_percent\r
+- global status_tetqualclasses\r
+- \r
+-\r
+- Ng_ReadStatus \r
+-\r
+- if { $multithread_redraw == 1 } {\r
+- set multithread_redraw 0;\r
+- redraw;\r
+- \r
+- global videoactive\r
+- if { $videoactive == 1 } {\r
+- puts "addframe"\r
+- .ndraw Ng_VideoClip addframe\r
+- }\r
+- }\r
+-\r
+- # global mem_moveable\r
+- # set mem_moveable [Ng_MemInfo moveable]\r
+-\r
+-\r
+- .statbar.per config -value [expr $status_percent/100] -text [format %2.1f [expr 0.1*int(10*$status_percent)]]%\r
+-\r
+-\r
+- if { $multithread_running } {\r
+- pack .statbar.per -side right -before .statbar.task -padx 6\r
+- } { \r
+- pack forget .statbar.per\r
+- }\r
+- \r
+-\r
+-\r
+- # tet quality\r
+- if {[winfo exists .qualityview_dlg] == 1} {\r
+- \r
+- global qualbar\r
+- global qualbarnull\r
+- global qualbaraxis\r
+-\r
+- set maxval 0\r
+- for {set i 0} {$i < 20} {incr i} {\r
+- if {[lindex $status_tetqualclasses $i] > $maxval} {\r
+- set maxval [lindex $status_tetqualclasses $i]\r
+- }\r
+- } \r
+-\r
+- set ubound 1\r
+- while { $ubound < $maxval } {\r
+- set ubound [expr {10 * $ubound}]\r
+- }\r
+- if { $ubound/5 > $maxval } {\r
+- set ubound [expr $ubound/5]\r
+- }\r
+- if { $ubound/2 > $maxval } {\r
+- set ubound [expr $ubound/2]\r
+- }\r
+-\r
+-\r
+- \r
+- for {set i 1} {$i <= 5} {incr i} {\r
+- # global qualbaraxis($i)\r
+-\r
+- set value [expr { $i * $ubound / 5 }]\r
+- .qualityview_dlg.c dchars $qualbaraxis($i) 0 end\r
+- .qualityview_dlg.c insert $qualbaraxis($i) end $value \r
+- }\r
+-\r
+- \r
+- for {set i 0} {$i < 20} {incr i} {\r
+- set x1 [expr {100 + ($i*15) + 2}]\r
+- set x2 [expr {$x1+10}]\r
+- \r
+- set nbrs [lindex $status_tetqualclasses $i]\r
+- set y [expr (249 - (200 * $nbrs / $ubound ) )]\r
+- \r
+- # global qualbar($i)\r
+- .qualityview_dlg.c coords $qualbar($i) $x1 250 $x2 $y\r
+-\r
+-# global qualbarnull($i)\r
+- if { $nbrs == 0 } {\r
+- .qualityview_dlg.c itemconfigure $qualbarnull($i) -text 0\r
+- } {\r
+- .qualityview_dlg.c itemconfigure $qualbarnull($i) -text "" \r
+- } \r
+- }\r
+- \r
+- }\r
+-\r
+-\r
+- if {[winfo exists .memuse_dlg] == 1} { \r
+- \r
+- global memmark\r
+- set usemb [Ng_MemInfo usedmb]\r
+- for {set i 0} {$i < [string length $usemb] } {incr i} {\r
+- if { [string index $usemb $i] == 0 } {\r
+- .memuse_dlg.c coords $memmark($i) [expr 50+$i] 68 [expr 50+$i] 70\r
+- } {\r
+- .memuse_dlg.c coords $memmark($i) [expr 50+$i] 50 [expr 50+$i] 70\r
+- }\r
+- }\r
+-\r
+- }\r
+- after 30 { timer2 }\r
+-}\r
+-# after 1000 { timer2 }\r
+-timer2\r
+-\r
+-\r
+-\r
+-\r
+-proc bgerror { error } {\r
+- global errorInfo userlevel\r
+- if { $userlevel == 3} {\r
+- puts "ERROR: $error" \r
+- puts "errinfo: $errorInfo"\r
+- }\r
+- tk_messageBox -title "Error Message" -message $error -type ok \r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-proc smh2 { menuitem } {\r
+- if {[catch {$menuitem entrycget active -label} name]} {\r
+- set name " "\r
+- } \r
+- show_menu_help $name \r
+- update idletasks\r
+-}\r
+-\r
+-bind .ngmenu <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.file <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.geometry <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.mesh <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.view <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.meshsize <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.special <<MenuSelect>> { smh2 %W }\r
+-bind .ngmenu.help <<MenuSelect>> { smh2 %W }\r
+-\r
+-\r
+-# command bindings \r
+-bind . <q> { .ngmenu.file invoke "Quit" }\r
+-bind . <l><g> { .ngmenu.file invoke "Load Geometry..." } ; \r
+-bind . <l><m> { .ngmenu.file invoke "Load Mesh..." } ;\r
+-bind . <s><m> { .ngmenu.file invoke "Save Mesh..." } ;\r
+-bind . <r><f> { .ngmenu.file activate "Recent Files" } ;\r
+-bind . <n><p> { newprimitivedialog } ; # \r
+-bind . <e><p> { editprimitivedialog }\r
+-bind . <e><s> { newsoliddialog }\r
+-bind . <g><m> { .ngmenu.mesh invoke "Generate Mesh" } ;\r
+-\r
+-\r
+-\r
+-\r
+-\r
++# netgen menus:
++
++menu .ngmenu -tearoff 0 -relief raised -bd 2
++. configure -menu .ngmenu
++
++.ngmenu add cascade -label "File" -menu .ngmenu.file -underline 0
++.ngmenu add cascade -label "Geometry" -menu .ngmenu.geometry -underline 0
++.ngmenu add cascade -label "Mesh" -menu .ngmenu.mesh -underline 0
++.ngmenu add cascade -label "View" -menu .ngmenu.view -underline 0
++.ngmenu add cascade -label "Refinement" -menu .ngmenu.meshsize -underline 5
++
++if { $userlevel == 3} {
++ .ngmenu add cascade -label "Special" -menu .ngmenu.special -underline 3
++}
++
++.ngmenu add cascade -label "Help" -menu .ngmenu.help -underline 0
++
++
++#####################################################
++# #
++# Menu File #
++# #
++#####################################################
++
++menu .ngmenu.file
++
++.ngmenu.file add command -label "Load Geometry..." -accelerator "<l><g>" \
++ -command {
++ set types {
++ {"All Geometry types" { .stl .stlb .step .stp .geo .in2d .igs .iges .brep .sat} }
++ {"IGES Geometry" {.igs .iges} }
++ {"BREP OpenCascade Geometry" {.brep} }
++ {"STL Geometry" {.stl} }
++ {"Binary STL Geometry" {.stlb} }
++ {"STEP Geometry" {.step .stp} }
++ {"Geometry file" {.geo} }
++ {"2D Geometry" {.in2d } }
++ }
++
++ set ACISavailable [Ng_ACISCommand isACISavailable]
++ if {$ACISavailable == "yes" } {
++ lappend types {"ACIS Geometry" {.sat} }
++ }
++
++ if {[catch {
++ set file [tk_getOpenFile -filetypes $types -initialdir $dirname -typevariable loadgeomtypevar]
++ }]} {
++ set file [tk_getOpenFile -filetypes $types -initialdir $dirname]
++ }
++
++ if {$file != ""} {
++ AddRecentFile $file
++ Ng_LoadGeometry $file
++ Ng_ParseGeometry
++# if { [Ng_STLInfo status]=="ERROR" } {
++# tk_messageBox -message "STL ERROR: \n [Ng_STLInfo statustext]" -type ok
++# }
++ set selectvisual geometry
++ Ng_SetVisParameters
++ redraw
++ wm title . [concat "$progname - " $file]
++ set dirname [file dirname $file]
++ set basefilename [file tail [file rootname $file]]
++
++ if { $hasocc == "yes" } {
++ rebuildoccdialog
++ }
++ }
++ }
++
++
++
++.ngmenu.file add command -label "Save Geometry..." \
++ -command {
++ set occgeometryloaded [Ng_OCCCommand isoccgeometryloaded]
++ puts $occgeometryloaded
++ if {$occgeometryloaded == 1 } {
++ set types {
++ {"IGES Geometry file" {.igs} }
++ {"STEP Geometry file" {.stp} }
++ {"STL Geometry file" {.stl} }
++ {"STL BIN Geometry file" {.stlb} }
++ }
++ } {
++ set types {
++ {"STL Geometry file" {.stl} }
++ {"STL BIN Geometry file" {.stlb} }
++ }
++ }
++
++ set ACISavailable [Ng_ACISCommand isACISavailable]
++ puts $ACISavailable
++ if {$ACISavailable == "yes" } {
++ lappend types {"ACIS Geometry" {.sat} }
++ }
++
++ set file [tk_getSaveFile -filetypes $types -initialdir $dirname -initialfile $basefilename ]
++ if {$file != ""} {
++ Ng_SaveGeometry $file
++ }
++ }
++
++
++
++.ngmenu.file add cascade -label "Recent Files" -menu .ngmenu.file.recent
++menu .ngmenu.file.recent
++
++
++proc AddRecentFile { filename } {
++ global progname
++ global dirname
++ catch { [.ngmenu.file.recent delete $filename] }
++ .ngmenu.file.recent insert 0 command -label $filename \
++ -command "AddRecentFile {$filename};
++ Ng_LoadGeometry {$filename};
++ Ng_ParseGeometry;
++ set selectvisual geometry;
++ Ng_SetVisParameters;
++ redraw;
++ wm title . [concat \" $progname - $filename \"];
++ set dirname {[file dirname $filename]};
++ set basefilename {[file tail [file rootname $filename]]};
++ rebuildoccdialog;"
++
++
++ if { [.ngmenu.file.recent index last] >= 6 } {
++ .ngmenu.file.recent delete last }
++
++ saveinifile;
++ }
++loadinifile;
++
++.ngmenu.file add separator
++
++
++.ngmenu.file add command -label "Load Mesh..." -accelerator "<l><m>" \
++ -command {
++ set types {
++ {"Mesh file" {.vol .vol.gz} } }
++ set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]
++ if {$file != ""} {
++ AddRecentMeshFile $file;
++ Ng_LoadMesh $file;
++ set selectvisual mesh
++ Ng_SetVisParameters
++ redraw
++ Ng_ReadStatus;
++# Ng_MeshSizeFromSurfaceMesh
++ wm title . [concat "$progname - " $file]
++ set dirname [file dirname $file]
++ set basefilename [file tail [file rootname $file]]
++ }
++ }
++
++
++
++# astrid
++.ngmenu.file add cascade -label "Recent Meshes" -menu .ngmenu.file.recentmesh
++menu .ngmenu.file.recentmesh
++
++
++proc AddRecentMeshFile { filename } {
++ global progname
++ global dirname
++ catch { [.ngmenu.file.recentmesh delete $filename] }
++ .ngmenu.file.recentmesh insert 0 command -label $filename \
++ -command "AddRecentMeshFile {$filename};
++ Ng_LoadMesh {$filename};
++ set selectvisual mesh;
++ Ng_SetVisParameters;
++ redraw;
++ wm title . [concat \" $progname - $filename \"];
++ set dirname {[file dirname $filename]};
++ set basefilename {[file tail [file rootname $filename]]};
++ rebuildoccdialog;"
++
++ if { [.ngmenu.file.recentmesh index last] >= 6 } {
++ .ngmenu.file.recentmesh delete last }
++
++ savemeshinifile;
++ }
++loadmeshinifile;
++
++# astrid ende
++
++
++.ngmenu.file add command -label "Save Mesh..." -accelerator "<s><m>" \
++ -command {
++ set types {
++ {"Mesh file" {.vol .vol.gz} } }
++
++ set file [tk_getSaveFile -filetypes $types -defaultextension ".vol.gz" -initialfile $basefilename -initialdir $dirname ]
++ if {$file != ""} {
++ Ng_SaveMesh $file }
++ AddRecentMeshFile $file;
++
++ }
++
++.ngmenu.file add command -label "Merge Mesh..." \
++ -command {
++ set types {
++ {"Mesh file" {.vol} } }
++ set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]
++ if {$file != ""} {
++ Ng_MergeMesh $file;
++ set selectvisual mesh
++ Ng_SetVisParameters
++ redraw
++ Ng_ReadStatus;
++ }
++ }
++
++
++
++
++
++.ngmenu.file add command -label "Import Mesh..." \
++ -command {
++ set types {
++ {"Neutral format" {.mesh .emt} }
++ {"Surface mesh format" {.surf} }
++ {"Universal format" {.unv} }
++ {"Olaf format" {.emt} }
++ {"TET format" {.tet} }
++ {"Pro/ENGINEER neutral format" {.fnf} }
++ }
++ set file [tk_getOpenFile -filetypes $types ]
++ if {$file != ""} {
++ Ng_ImportMesh $file
++ set selectvisual mesh
++ Ng_SetVisParameters
++ redraw
++ Ng_ReadStatus;
++ }
++ }
++
++
++.ngmenu.file add command -label "Export Mesh..." \
++ -command {
++
++# global meshexportformats
++ foreach exportformat $meshexportformats {
++ if { [lindex $exportformat 0] == $exportfiletype } {
++ set extension [lindex $exportformat 1]
++ }
++ }
++
++ if { $exportfiletype == "Elmer Format"} {
++ set file [file nativename [tk_chooseDirectory -title "Elmer Mesh Export - Select Directory"]]
++ } elseif { $exportfiletype == "OpenFOAM 1.5+ Format"} {
++ set file [file nativename [tk_chooseDirectory -title "OpenFOAM 1.5+ Mesh Export - Select Case Directory"]]
++ } elseif { $exportfiletype == "OpenFOAM 1.5+ Compressed"} {
++ set file [file nativename [tk_chooseDirectory -title "OpenFOAM 1.5+ Mesh Export - Select Case Directory"]]
++ } else {
++# set file [tk_getSaveFile -filetypes "{ \"$exportfiletype\" {$extension} }" ]
++ set file [tk_getSaveFile -filetypes "{ \"$exportfiletype\" {*}}" ]
++ }
++
++ if {$file != ""} {
++ Ng_ExportMesh $file $exportfiletype
++ }
++ }
++
++.ngmenu.file add cascade -label "Export Filetype" -menu .ngmenu.file.filetype
++
++menu .ngmenu.file.filetype
++
++
++.ngmenu.file add separator
++
++
++.ngmenu.file add command -label "Save Solution..." \
++ -command {
++ set types {
++ {"Solution File" {.sol} }
++ {"VTK File" {.vtk} }
++ }
++ set file [tk_getSaveFile -filetypes $types ]
++ if {$file != ""} {
++ Ng_SaveSolution $file
++ }
++ }
++#-defaultextension ".sol" ]
++
++.ngmenu.file add command -label "Import Solution..." \
++ -command {
++ set types { {"Solution File" {.sol} } }
++ set file [tk_getOpenFile -filetypes $types -defaultextension ".sol" ]
++ if {$file != ""} {
++ Ng_ImportSolution $file
++ set selectvisual solution
++ Ng_SetVisParameters
++ redraw
++ }
++ }
++
++
++
++
++
++
++set demostarttime [clock clicks -millisecond]
++set stopdemo 0
++proc demoredraw { } {
++ global demostarttime
++ global stopdemo
++ set curtime [clock clicks -millisecond]
++ set result [ Ng_DemoSetTime [expr $curtime - $demostarttime] ]
++ redraw
++ global videoactive
++ if { $videoactive == 1 } {
++ puts "addframe"
++ .ndraw Ng_VideoClip addframe
++ }
++ if { $result == 0 && $stopdemo == 0 } {
++ after 1 { demoredraw }
++ }
++}
++.ngmenu.file add command -label "Show Demo..." \
++ -command {
++ set types { {"Demo File" {.dem} } }
++ set file [tk_getOpenFile -filetypes $types -defaultextension ".dem" ]
++ if {$file != ""} {
++ Ng_ShowDemo $file
++ set demostarttime [clock clicks -millisecond]
++ set stopdemo 0
++ demoredraw
++ }
++ }
++
++
++
++
++.ngmenu.file add separator
++
++.ngmenu.file add command -label "Snapshot..." \
++ -command {
++ set types {
++ {"JPG file" {.jpg} }
++ {"GIF file" {.gif} }
++ {"PPM file" {.ppm} }
++ }
++ set file [tk_getSaveFile -filetypes $types]
++# -defaultextension ".ppm"]
++ if {$file != ""} {
++ .ndraw Ng_SnapShot $file }
++ }
++
++
++.ngmenu.file add cascade -label "Video clip" -menu .ngmenu.file.video
++menu .ngmenu.file.video
++
++set videoactive 0
++.ngmenu.file.video add command -label "start..." \
++ -command {
++ set types {
++ {"MPG file" {.mpg} }
++ }
++ set file [tk_getSaveFile -filetypes $types]
++ if {$file != ""} {
++ .ndraw Ng_VideoClip init $file
++ global videoactive
++ set videoactive 1
++ }
++ }
++
++.ngmenu.file.video add command -label "add frame..." \
++ -command {.ndraw Ng_VideoClip addframe }
++
++.ngmenu.file.video add command -label "one cycle" \
++ -command {
++ set visoptions.redrawperiodic 1
++ for { set j 0 } { $j < 100 } { incr j } {
++ puts "j = $j"
++ Ng_Vis_Set time [expr (1000 * $j / 100)]
++ redraw
++ .ndraw Ng_VideoClip addframe
++ after 200
++ }
++ }
++
++.ngmenu.file.video add command -label "finalize..." \
++ -command {
++ .ndraw Ng_VideoClip finalize
++ global videoactive
++ set videoactive 0
++ }
++
++
++
++.ngmenu.file add command -label "Save Options" \
++ -command { saveoptions }
++
++
++
++
++.ngmenu.file add separator
++
++
++## herbert tcl load menue
++# .ngmenu.file add command -label "Run tests ..." \
++\# -command { runtestdialog }
++##
++# .ngmenu.file add separator
++
++.ngmenu.file add command -label "Quit" -accelerator "<q>" \
++ -command {
++ puts "Thank you for using $progname";
++
++ if { [catch { unload libngsolve[info sharedlibextension] ngsolve } result ] } {
++ # puts "cannot unload ngsolve"
++ # puts "error: $result"
++ }
++
++ Ng_Exit;
++ destroy .
++ }
++# exit
++
++
++#####################################################
++# #
++# Menu Mesh #
++# #
++#####################################################
++
++menu .ngmenu.mesh
++.ngmenu.mesh add command -label "Generate Mesh" -accelerator "<g><m>" \
++ -command {
++ set selectvisual mesh
++ Ng_SetVisParameters
++ Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}
++ Ng_ReadStatus
++ redraw
++ }
++
++.ngmenu.mesh add command -label "Stop Meshing" \
++ -command { Ng_StopMeshing }
++
++.ngmenu.mesh add command -label "Meshing Options..." \
++ -command meshingoptionsdialog
++
++
++.ngmenu.mesh add separator
++
++.ngmenu.mesh add command -label "Delete Mesh" \
++ -command { Ng_New mesh; Ng_ReadStatus; redraw }
++
++.ngmenu.mesh add command -label "Delete Vol Mesh" \
++ -command { Ng_DeleteVolMesh; Ng_ReadStatus; redraw }
++
++
++.ngmenu.mesh add command -label "Mesh Info" \
++ -command {
++ set dim [Ng_MeshInfo dim]
++ set np [Ng_MeshInfo np]
++ set ne [Ng_MeshInfo ne]
++ set nse [Ng_MeshInfo nse]
++ set nseg [Ng_MeshInfo nseg]
++ set bbox [Ng_MeshInfo bbox]
++ tk_messageBox -message "Dimension: $dim\nPoints: $np\nElements: $ne\nSurface Els: $nse\nSegments: $nseg\nxmin [lindex $bbox 0] xmax [lindex $bbox 1]\nymin [lindex $bbox 2] ymax [lindex $bbox 3]\nzmin [lindex $bbox 4] zmax [lindex $bbox 5]"
++ }
++
++
++.ngmenu.mesh add command -label "Mesh Quality" \
++ -command {
++ set inplanemin 0
++ set inplanemax 0
++ set betplanemin 0
++ set betplanemax 0
++ Ng_MeshQuality inplanemin inplanemax betplanemin betplanemax
++ puts "Triangle angles : $inplanemin - $inplanemax"
++ puts "Tet angles : $betplanemin - $betplanemax"
++ tk_messageBox -message "Triangle angles : $inplanemin - $inplanemax \n Tet angles : $betplanemin - $betplanemax"
++ }
++
++# .ngmenu.mesh add command -label "Quality Plot" \
++# -command { qualityviewdialog 1 }
++
++
++
++
++.ngmenu.mesh add command -label "Check Surface Mesh" \
++ -command { Ng_CheckSurfaceMesh }
++.ngmenu.mesh add command -label "Check Volume Mesh" \
++ -command { Ng_CheckVolumeMesh }
++
++.ngmenu.mesh add command -label "Edit Boundary Conditions..." \
++ -command { bcpropdialog }
++
++if { $userlevel == 3 } {
++ .ngmenu.mesh add command -label "Mesh Doctor..." \
++ -command { meshdoctordialog }
++}
++
++.ngmenu.mesh add command -label "METIS Mesh Partitioning..." \
++ -command { METISdialog }
++
++.ngmenu.mesh add separator
++
++.ngmenu.mesh add command -label "Analyze Geometry" \
++ -command { Ng_GenerateMesh ag ag; Ng_ReadStatus; redraw }
++.ngmenu.mesh add command -label "Mesh Edges" \
++ -command { Ng_GenerateMesh me me; Ng_ReadStatus; redraw }
++.ngmenu.mesh add command -label "Mesh Surface" \
++ -command { set selectvisual mesh; Ng_SetVisParameters; \
++ Ng_GenerateMesh ms ms; Ng_ReadStatus; redraw }
++
++.ngmenu.mesh add command -label "Optimize Surface" \
++ -command { Ng_GenerateMesh os os cmsmSm; redraw }
++
++.ngmenu.mesh add cascade -label "Surface Optim. Step" -menu .ngmenu.mesh.surfoptstep
++
++menu .ngmenu.mesh.surfoptstep
++.ngmenu.mesh.surfoptstep add command -label "Mesh Smoothing" \
++ -command { Ng_GenerateMesh os os m; redraw}
++.ngmenu.mesh.surfoptstep add command -label "Edge swapping (topologic)" \
++ -command { Ng_GenerateMesh os os s; redraw}
++.ngmenu.mesh.surfoptstep add command -label "Edge swapping (metric)" \
++ -command { Ng_GenerateMesh os os S; redraw}
++.ngmenu.mesh.surfoptstep add command -label "Combine points" \
++ -command { Ng_GenerateMesh os os c; redraw}
++
++
++.ngmenu.mesh add separator
++.ngmenu.mesh add command -label "Mesh Volume" \
++ -command { Ng_GenerateMesh mv mv; Ng_ReadStatus }
++.ngmenu.mesh add command -label "Optimize Volume" \
++ -command { Ng_GenerateMesh ov ov; Ng_ReadStatus }
++.ngmenu.mesh add command -label "Smooth Opt Volume" \
++ -command { Ng_GenerateMesh ov ov m; Ng_ReadStatus }
++.ngmenu.mesh add command -label "Smooth Opt Volume Jacobian" \
++ -command { Ng_GenerateMesh ov ov j; Ng_ReadStatus }
++
++
++
++#####################################################
++# #
++# Menu Geometry #
++# #
++#####################################################
++
++menu .ngmenu.geometry
++
++
++
++
++
++
++
++#####################################################
++# #
++# Menu View #
++# #
++#####################################################
++
++menu .ngmenu.view
++.ngmenu.view add command -label "Zoom all" \
++ -command { Ng_ZoomAll; redraw }
++.ngmenu.view add command -label "Center" \
++ -command { Ng_Center; redraw }
++
++.ngmenu.view add command -label "x-y plane" \
++ -command { Ng_StandardRotation xy; redraw }
++.ngmenu.view add command -label "y-x plane" \
++ -command { Ng_StandardRotation yx; redraw }
++.ngmenu.view add command -label "x-z plane" \
++ -command { Ng_StandardRotation xz; redraw }
++.ngmenu.view add command -label "z-x plane" \
++ -command { Ng_StandardRotation zx; redraw }
++.ngmenu.view add command -label "y-z plane" \
++ -command { Ng_StandardRotation yz; redraw }
++.ngmenu.view add command -label "z-y plane" \
++ -command { Ng_StandardRotation zy; redraw }
++
++.ngmenu.view add command -label "Viewing Options..." \
++ -command { viewingoptionsdialog; redraw }
++.ngmenu.view add command -label "Clipping Plane..." \
++ -command { clippingdialog; redraw }
++.ngmenu.view add command -label "Solution Data..." \
++ -command { visual_dialog; redraw }
++.ngmenu.view add checkbutton -variable viewqualityplot \
++ -label "Quality Plot" \
++ -command { qualityviewdialog $viewqualityplot }
++.ngmenu.view add checkbutton -variable memuseplot \
++ -label "Memory Usage" \
++ -command { memusedialog $memuseplot }
++
++
++
++
++#####################################################
++# #
++# Menu Refinement #
++# #
++#####################################################
++#
++# Mesh size menu
++#
++menu .ngmenu.meshsize
++.ngmenu.meshsize add command -label "Refine uniform" \
++ -command { Ng_Refine; Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }
++
++.ngmenu.meshsize add command -label "Second Order" \
++ -command { Ng_SecondOrder; Ng_ReadStatus; redraw }
++
++.ngmenu.meshsize add command -label "Validate Second Order" \
++ -command { Ng_ValidateSecondOrder; Ng_ReadStatus; redraw }
++
++.ngmenu.meshsize add command -label "High Order" \
++ -command { Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }
++
++.ngmenu.meshsize add separator
++
++.ngmenu.meshsize add command -label "Refinement Dialog..." \
++ -command { refinementdialog }
++.ngmenu.meshsize add command -label "Load Meshsize..." \
++ -command {
++ set types {
++ {"Meshsize file" {.msz} } }
++ set file [tk_getOpenFile -filetypes $types]
++ if {$file != ""} {
++ Ng_LoadMeshSize $file;
++ }
++ }
++.ngmenu.meshsize add command -label "MS from Surf Mesh" \
++ -command { Ng_MeshSizeFromSurfaceMesh }
++
++
++if { $userlevel == 3 } {
++.ngmenu.meshsize add command -label "Singular point ms" \
++ -command { Ng_SingularPointMS; }
++
++.ngmenu.meshsize add command -label "Singular edge ms" \
++ -command { Ng_SingularEdgeMS; }
++
++.ngmenu.meshsize add separator
++
++set bisectfilename "";
++
++.ngmenu.meshsize add command -label "Bisection" \
++ -command { Ng_ReadStatus; set oldnp 0; set newnp $status_np;
++# Ng_BisectCopyMesh;
++# Ng_Split2Tets;
++ Ng_ReadStatus;
++
++ while { $oldnp < $newnp } {
++# if { $level == 0 } {
++# Ng_ExportMesh feppmesh.vol fepp;
++# } {
++# Ng_ExportMesh feppmesh$level feppml
++# }
++ set level [expr $level+1]
++ if { $bisectfilename == ""} {
++ Ng_Bisect;
++ } else {
++ Ng_Bisect $bisectfilename;
++ }
++# Ng_HighOrder ${options.elementorder} "noparallel"
++# Ng_Split2Tets;
++ Ng_ReadStatus;
++ redraw;
++
++ if { $bisectfilename == ""} {
++ set oldnp $newnp;
++ set newnp $status_np;
++ puts "oldnp $oldnp newnp $newnp";
++ } else {
++ set oldnp $newnp;
++ }
++ }
++ }
++# -command { Ng_Bisect; Ng_ReadStatus; redraw }
++# -command { exec netgen abc >outfile 2>errfile; Ng_ReadStatus; redraw }
++
++}
++
++.ngmenu.meshsize add command -label "Load Refinement Info..." \
++ -command {
++ set types {
++ {"Refinement info" {.refine} }}
++ set bisectfilename [tk_getOpenFile -filetypes $types]
++ }
++
++.ngmenu.meshsize add command -label "Z-Refinement" \
++ -command { Ng_ZRefinement 2; Ng_ReadStatus; redraw }
++
++
++# .ngmenu.meshsize add command -label "hp-Refinement" \
++\# -command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }
++
++.ngmenu.meshsize add cascade -label "hp-Refinement" -menu .ngmenu.meshsize.hpref
++menu .ngmenu.meshsize.hpref
++.ngmenu.meshsize.hpref add command -label "1 Level" \
++ -command { Ng_HPRefinement 1; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "2 Levels" \
++ -command { Ng_HPRefinement 2; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "3 Levels" \
++ -command { Ng_HPRefinement 3; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "4 Levels" \
++ -command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "5 Levels" \
++ -command { Ng_HPRefinement 5; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "6 Levels" \
++ -command { Ng_HPRefinement 6; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "7 Levels" \
++ -command { Ng_HPRefinement 7; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "8 Levels" \
++ -command { Ng_HPRefinement 8; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "9 Levels" \
++ -command { Ng_HPRefinement 9; Ng_ReadStatus; redraw }
++.ngmenu.meshsize.hpref add command -label "10 Levels" \
++ -command { Ng_HPRefinement 10; Ng_ReadStatus; redraw }
++
++
++.ngmenu.meshsize add command -label "Split to Tets" \
++ -command { Ng_Split2Tets; Ng_ReadStatus; redraw }
++
++
++
++
++
++#####################################################
++# #
++# Menu Special #
++# #
++#####################################################
++
++menu .ngmenu.special
++.ngmenu.special add command -label "Prismatic Boundary Layer" \
++ -command { Ng_GenerateBoundaryLayer; redraw }
++.ngmenu.special add command -label "Insert virtual boundary layer" \
++ -command { Ng_InsertVirtualBL; redraw }
++.ngmenu.special add command -label "Cut off and combine with other" \
++ -command {
++ set types { {"Mesh file" {.vol} } }
++ set file [tk_getOpenFile -filetypes $types]
++ if {$file != ""} {
++ Ng_CutOffAndCombine $file; }
++ redraw
++ }
++.ngmenu.special add command -label "Helmholtz Mesh grading" \
++ -command { Ng_HelmholtzMesh; }
++.ngmenu.special add cascade -label "Colour-based boundary conditions" -menu .ngmenu.special.colbndcond
++
++menu .ngmenu.special.colbndcond
++ .ngmenu.special.colbndcond add command -label "Inspect Colours in mesh" \
++ -command { currmeshcoloursdialog }
++
++ .ngmenu.special.colbndcond add separator
++
++ .ngmenu.special.colbndcond add command -label "Automatic Assignment" \
++ -command { Ng_AutoColourBcProps auto; redraw }
++
++ .ngmenu.special.colbndcond add separator
++
++ set ocffile [file join ${ngdir} netgen.ocf];
++
++ .ngmenu.special.colbndcond add command -label "Select Colour Profile file" \
++ -command {
++ set types { {"Colour Profile file" {.ocf} } }
++ set ocffile [tk_getOpenFile -filetypes $types]
++ if {$ocffile == ""} {
++ set ocffile [file join ${ngdir} netgen.ocf]; }
++ }
++ .ngmenu.special.colbndcond add command -label "Profile based Assignment" \
++ -command { Ng_AutoColourBcProps profile ${ocffile}; redraw }
++
++
++# menu .mbar.stl.menu
++# .mbar.stl.menu add command -label "STL options" \
++# -command { stloptionsdialog; }
++#.mbar.stl.menu add command -label "STL Doctor" \
++# -command { stldoctordialog; }
++
++
++#####################################################
++# #
++# Menu Help #
++# #
++#####################################################
++
++
++
++
++menu .ngmenu.help
++# .ngmenu.help add command -label "Ng Help..." \
++\# -command { help_main }
++# .ngmenu.view add checkbutton -variable showsensitivehelp \
++# -label "Sensitve Help" \
++# -command { sensitivehelpdialog $showsensitivehelp }
++.ngmenu.view add checkbutton -label "Help Line" -variable showhelpline \
++ -command {
++ if { $showhelpline == 1} {
++ pack .helpline -before .statbar -side bottom -fill x -padx 3p
++ } {
++ pack forget .helpline
++ }
++}
++
++.ngmenu.help add command -label "About..." \
++ -command {
++tk_messageBox -message "This is NETGEN \nmainly written by \nJoachim Schoeberl \nthanks to \nRobert Gaisbauer, Johannes Gerstmayr, Philippose Rajan"
++}
++
++# tk_menuBar .mbar .mbar.file .mbar.mesh .mbar.test .mbar.help
++# focus .mbar
++
++
++
++
++#####################################################
++# #
++# Button bar #
++# #
++#####################################################
++
++frame .bubar -relief raised -bd 2
++pack .bubar -side top -fill x
++
++button .bubar.testb -text "Test" -command { Ng_SaveGeometry }
++button .bubar.surfm -text "Generate Mesh" -command \
++ {
++ .ngmenu.mesh invoke "Generate Mesh";
++# set selectvisual mesh;
++# Ng_SetVisParameters;
++# Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}
++# redraw
++ }
++button .bubar.stopm -text "Stop" -command \
++ {
++ # Ng_StopMeshing;
++ set multithread_terminate 1;
++ set stopdemo 1;
++ }
++button .bubar.exitb -text "Quit" \
++ -command {
++ set ans [tk_messageBox -title "Quit Netgen?" -message "Do you really want to quit Netgen?" -type yesno -default "no" -icon question]
++ if { $ans == "yes" } {
++ .ngmenu.file invoke "Quit";
++ }
++ }
++pack .bubar.exitb .bubar.surfm .bubar.stopm -side left
++
++#button .bubar.scan -text "Scan" \
++# -command { Ng_ParseGeometry; set selectvisual geometry; Ng_SetVisParameters; redraw }
++
++button .bubar.zoomall -text "Zoom All" \
++ -command { Ng_ZoomAll; redraw }
++
++button .bubar.center -text "Center" \
++ -command { Ng_Center; redraw }
++
++# tk_optionMenu .bubar.modesel drawmode "rotate" "move " "zoom "
++tixOptionMenu .bubar.modesel \
++ -options {
++ label.width 0
++ label.anchor e
++ menubutton.width 6
++ } \
++ -variable drawmode
++
++.bubar.modesel add command rotate -label Rotate
++.bubar.modesel add command move -label Move
++.bubar.modesel add command zoom -label Zoom
++
++
++
++set viewvals { geometry specpoints mesh solution}
++if { $userlevel == 3} {
++ set viewvals { geometry mesh specpoints surfmeshing modelview solution}
++}
++
++set viewvallabs(cross) "Cross"
++set viewvallabs(geometry) "Geometry"
++set viewvallabs(mesh) "Mesh"
++set viewvallabs(specpoints) "Edges"
++set viewvallabs(surfmeshing) "Mesh Gen"
++set viewvallabs(modelview) "Modeller"
++set viewvallabs(solution) "Solution"
++
++tixOptionMenu .bubar.selview \
++ -options {
++ label.width 0
++ label.anchor e
++ menubutton.width 10
++ } \
++
++foreach viewv $viewvals {
++ .bubar.selview add command $viewv -label $viewvallabs($viewv)
++}
++
++
++
++.bubar.selview config -variable selectvisual
++.bubar.selview config -command { Ng_SetVisParameters; redraw }
++
++
++pack .bubar.modesel -side right
++pack forget .bubar.modesel
++pack .bubar.center .bubar.zoomall .bubar.selview -side right
++
++.ngmenu.view add checkbutton -variable viewrotatebutton \
++ -label "Enable LeftButton Selection" \
++ -command {
++ if { $viewrotatebutton } {
++ pack .bubar.modesel -side right
++ } {
++ pack forget .bubar.modesel
++ }
++ }
++
++
++
++
++#####################################################
++# #
++# Status bar #
++# #
++#####################################################
++
++label .helpline -text "None"
++pack forget .helpline -side bottom -fill x
++
++frame .statbar -relief flat -bd 2
++pack .statbar -side bottom -fill x
++
++label .statbar.ptslabel -text "Points: "
++label .statbar.ptsval -textvariable status_np
++label .statbar.elslabel -text " Elements: "
++label .statbar.elsval -textvariable status_ne
++label .statbar.selslabel -text " Surf Elements: "
++label .statbar.selsval -textvariable status_nse
++# label .statbar.memlabel -text " Mem: "
++# label .statbar.memval -textvariable mem_moveable
++label .statbar.task -textvariable status_task
++
++pack .statbar.ptslabel .statbar.ptsval -side left -ipady 3p
++pack .statbar.elslabel .statbar.elsval -side left -ipady 3p
++pack .statbar.selslabel .statbar.selsval -side left -ipady 3p
++
++# if { $userlevel == 3 } {
++# pack .statbar.memlabel .statbar.memval -side left -ipady 3p
++# }
++
++
++tixMeter .statbar.per -value 0 -text 0%
++.statbar.per configure -fillcolor blue
++
++pack .statbar.per -side right
++pack .statbar.task -side right -ipady 4
++
++set qualbaraxis(0) 0
++set qualbar(0) 0
++set qualbarnull(0) 0
++
++
++
++proc timer2 { } {
++ global status_np
++ global status_ne
++ global status_nse
++ global multithread_running
++ global multithread_redraw
++ global status_working
++ global status_task
++ global status_percent
++ global status_tetqualclasses
++
++
++ Ng_ReadStatus
++
++ if { $multithread_redraw == 1 } {
++ set multithread_redraw 0;
++ redraw;
++
++ global videoactive
++ if { $videoactive == 1 } {
++ puts "addframe"
++ .ndraw Ng_VideoClip addframe
++ }
++ }
++
++ # global mem_moveable
++ # set mem_moveable [Ng_MemInfo moveable]
++
++
++ .statbar.per config -value [expr $status_percent/100] -text [format %2.1f [expr 0.1*int(10*$status_percent)]]%
++
++
++ if { $multithread_running } {
++ pack .statbar.per -side right -before .statbar.task -padx 6
++ } {
++ pack forget .statbar.per
++ }
++
++
++
++ # tet quality
++ if {[winfo exists .qualityview_dlg] == 1} {
++
++ global qualbar
++ global qualbarnull
++ global qualbaraxis
++
++ set maxval 0
++ for {set i 0} {$i < 20} {incr i} {
++ if {[lindex $status_tetqualclasses $i] > $maxval} {
++ set maxval [lindex $status_tetqualclasses $i]
++ }
++ }
++
++ set ubound 1
++ while { $ubound < $maxval } {
++ set ubound [expr {10 * $ubound}]
++ }
++ if { $ubound/5 > $maxval } {
++ set ubound [expr $ubound/5]
++ }
++ if { $ubound/2 > $maxval } {
++ set ubound [expr $ubound/2]
++ }
++
++
++
++ for {set i 1} {$i <= 5} {incr i} {
++ # global qualbaraxis($i)
++
++ set value [expr { $i * $ubound / 5 }]
++ .qualityview_dlg.c dchars $qualbaraxis($i) 0 end
++ .qualityview_dlg.c insert $qualbaraxis($i) end $value
++ }
++
++
++ for {set i 0} {$i < 20} {incr i} {
++ set x1 [expr {100 + ($i*15) + 2}]
++ set x2 [expr {$x1+10}]
++
++ set nbrs [lindex $status_tetqualclasses $i]
++ set y [expr (249 - (200 * $nbrs / $ubound ) )]
++
++ # global qualbar($i)
++ .qualityview_dlg.c coords $qualbar($i) $x1 250 $x2 $y
++
++# global qualbarnull($i)
++ if { $nbrs == 0 } {
++ .qualityview_dlg.c itemconfigure $qualbarnull($i) -text 0
++ } {
++ .qualityview_dlg.c itemconfigure $qualbarnull($i) -text ""
++ }
++ }
++
++ }
++
++
++ if {[winfo exists .memuse_dlg] == 1} {
++
++ global memmark
++ set usemb [Ng_MemInfo usedmb]
++ for {set i 0} {$i < [string length $usemb] } {incr i} {
++ if { [string index $usemb $i] == 0 } {
++ .memuse_dlg.c coords $memmark($i) [expr 50+$i] 68 [expr 50+$i] 70
++ } {
++ .memuse_dlg.c coords $memmark($i) [expr 50+$i] 50 [expr 50+$i] 70
++ }
++ }
++
++ }
++ after 30 { timer2 }
++}
++# after 1000 { timer2 }
++timer2
++
++
++
++
++proc bgerror { error } {
++ global errorInfo userlevel
++ if { $userlevel == 3} {
++ puts "ERROR: $error"
++ puts "errinfo: $errorInfo"
++ }
++ tk_messageBox -title "Error Message" -message $error -type ok
++}
++
++
++
++
++
++
++proc smh2 { menuitem } {
++ if {[catch {$menuitem entrycget active -label} name]} {
++ set name " "
++ }
++ show_menu_help $name
++ update idletasks
++}
++
++bind .ngmenu <<MenuSelect>> { smh2 %W }
++bind .ngmenu.file <<MenuSelect>> { smh2 %W }
++bind .ngmenu.geometry <<MenuSelect>> { smh2 %W }
++bind .ngmenu.mesh <<MenuSelect>> { smh2 %W }
++bind .ngmenu.view <<MenuSelect>> { smh2 %W }
++bind .ngmenu.meshsize <<MenuSelect>> { smh2 %W }
++bind .ngmenu.special <<MenuSelect>> { smh2 %W }
++bind .ngmenu.help <<MenuSelect>> { smh2 %W }
++
++
++# command bindings
++bind . <q> { .ngmenu.file invoke "Quit" }
++bind . <l><g> { .ngmenu.file invoke "Load Geometry..." } ;
++bind . <l><m> { .ngmenu.file invoke "Load Mesh..." } ;
++bind . <s><m> { .ngmenu.file invoke "Save Mesh..." } ;
++bind . <r><f> { .ngmenu.file activate "Recent Files" } ;
++bind . <n><p> { newprimitivedialog } ; #
++bind . <e><p> { editprimitivedialog }
++bind . <e><s> { newsoliddialog }
++bind . <g><m> { .ngmenu.mesh invoke "Generate Mesh" } ;
++
++
++
++
++
+diff -Naur netgen-5.3.1_SRC_orig/ng/netgen.ocf netgen-5.3.1_SRC_modif/ng/netgen.ocf
+--- netgen-5.3.1_SRC_orig/ng/netgen.ocf 2014-08-29 13:54:01.000000000 +0400
++++ netgen-5.3.1_SRC_modif/ng/netgen.ocf 2019-11-14 16:56:26.630334076 +0300
+@@ -1,32 +1,32 @@
+-# Netgen Mesher\r
+-# Boundary Condition Colour Profile\r
+-#\r
+-# Name: netgen.ocf\r
+-#\r
+-# Description: Netgen default colour \r
+-# profile file for colour based automatic \r
+-# assignment of boundary condition numbers\r
+-#\r
+-# Format: \r
+-# [boundary_colours] (mandatory keyword)\r
+-# <num of entries>\r
+-# <bc_num1> <R> <G> <B>\r
+-# <bc_num2> <R> <G> <B>\r
+-# ....\r
+-# ....\r
+-# NOTE: \r
+-# * Currently, the default Boundary \r
+-# Condition number assigned to faces without \r
+-# any colour defined is "1"\r
+-# * Boundary Condition number "0" is invalid, \r
+-# and should not be used\r
+-\r
+-boundary_colours\r
+-7\r
+-2 0.0000 0.0000 0.0000\r
+-3 1.0000 0.0000 0.0000\r
+-4 0.0000 0.0000 1.0000\r
+-5 1.0000 1.0000 0.0000\r
+-6 0.0000 1.0000 1.0000\r
+-7 1.0000 0.0000 1.0000\r
+-8 1.0000 1.0000 1.0000\r
++# Netgen Mesher
++# Boundary Condition Colour Profile
++#
++# Name: netgen.ocf
++#
++# Description: Netgen default colour
++# profile file for colour based automatic
++# assignment of boundary condition numbers
++#
++# Format:
++# [boundary_colours] (mandatory keyword)
++# <num of entries>
++# <bc_num1> <R> <G> <B>
++# <bc_num2> <R> <G> <B>
++# ....
++# ....
++# NOTE:
++# * Currently, the default Boundary
++# Condition number assigned to faces without
++# any colour defined is "1"
++# * Boundary Condition number "0" is invalid,
++# and should not be used
++
++boundary_colours
++7
++2 0.0000 0.0000 0.0000
++3 1.0000 0.0000 0.0000
++4 0.0000 0.0000 1.0000
++5 1.0000 1.0000 0.0000
++6 0.0000 1.0000 1.0000
++7 1.0000 0.0000 1.0000
++8 1.0000 1.0000 1.0000
+diff -Naur netgen-5.3.1_SRC_orig/ng/parameters.tcl netgen-5.3.1_SRC_modif/ng/parameters.tcl
+--- netgen-5.3.1_SRC_orig/ng/parameters.tcl 2014-08-29 13:54:01.000000000 +0400
++++ netgen-5.3.1_SRC_modif/ng/parameters.tcl 2019-11-14 16:56:26.658333292 +0300
+@@ -1,50 +1,50 @@
+-proc setgranularity { gran } {\r
+-#\r
+-# puts "set granularity $gran"\r
+-#\r
+- if {$gran == 6} { return }\r
+- set gran [expr $gran - 1]\r
+-#\r
+- global options.curvaturesafety\r
+- set surfcurvlist { 1 1.5 2 3 5 }\r
+- set options.curvaturesafety [lindex $surfcurvlist $gran]\r
+-\r
+- global options.segmentsperedge\r
+- set spelist { 0.3 0.5 1 2 3 }\r
+- set options.segmentsperedge [lindex $spelist $gran]\r
+- \r
+- global stloptions.resthsurfcurvfac\r
+- set surfcurvfaclist { 0.25 0.5 1 1.5 3 }\r
+- set stloptions.resthsurfcurvfac [lindex $surfcurvfaclist $gran]\r
+-\r
+- global stloptions.resthchartdistfac\r
+- set chartdistfaclist { 0.8 1 1.5 2 5 }\r
+- set stloptions.resthchartdistfac [lindex $chartdistfaclist $gran]\r
+-\r
+- global stloptions.resthlinelengthfac\r
+- set linelengthfaclist { 0.2 0.35 0.5 1.5 3 }\r
+- set stloptions.resthlinelengthfac [lindex $linelengthfaclist $gran]\r
+-\r
+- global stloptions.resthcloseedgefac\r
+- set closeedgefaclist { 0.5 1 2 3.5 5 }\r
+- set stloptions.resthcloseedgefac [lindex $closeedgefaclist $gran]\r
+-\r
+- global stloptions.resthminedgelen\r
+- set minedgelenlist { 0.002 0.02 0.2 1.0 2.0 5.0 10.0 }\r
+- set stloptions.resthminedgelen [lindex $minedgelenlist $gran]\r
+- \r
+- global stloptions.resthedgeanglefac\r
+- set edgeanglefaclist { 0.25 0.5 1 1.5 3 }\r
+- set stloptions.resthedgeanglefac [lindex $edgeanglefaclist $gran]\r
+-\r
+-\r
+- global stloptions.resthsurfmeshcurvfac \r
+- set surfmeshcurvlist { 1 1.5 2 3 5 }\r
+- set stloptions.resthsurfmeshcurvfac [lindex $surfmeshcurvlist $gran]\r
+-\r
+-\r
+- global options.grading\r
+- set gradinglist { 0.7 0.5 0.3 0.2 0.1 }\r
+- set options.grading [lindex $gradinglist $gran]\r
+- \r
+-}\r
++proc setgranularity { gran } {
++#
++# puts "set granularity $gran"
++#
++ if {$gran == 6} { return }
++ set gran [expr $gran - 1]
++#
++ global options.curvaturesafety
++ set surfcurvlist { 1 1.5 2 3 5 }
++ set options.curvaturesafety [lindex $surfcurvlist $gran]
++
++ global options.segmentsperedge
++ set spelist { 0.3 0.5 1 2 3 }
++ set options.segmentsperedge [lindex $spelist $gran]
++
++ global stloptions.resthsurfcurvfac
++ set surfcurvfaclist { 0.25 0.5 1 1.5 3 }
++ set stloptions.resthsurfcurvfac [lindex $surfcurvfaclist $gran]
++
++ global stloptions.resthchartdistfac
++ set chartdistfaclist { 0.8 1 1.5 2 5 }
++ set stloptions.resthchartdistfac [lindex $chartdistfaclist $gran]
++
++ global stloptions.resthlinelengthfac
++ set linelengthfaclist { 0.2 0.35 0.5 1.5 3 }
++ set stloptions.resthlinelengthfac [lindex $linelengthfaclist $gran]
++
++ global stloptions.resthcloseedgefac
++ set closeedgefaclist { 0.5 1 2 3.5 5 }
++ set stloptions.resthcloseedgefac [lindex $closeedgefaclist $gran]
++
++ global stloptions.resthminedgelen
++ set minedgelenlist { 0.002 0.02 0.2 1.0 2.0 5.0 10.0 }
++ set stloptions.resthminedgelen [lindex $minedgelenlist $gran]
++
++ global stloptions.resthedgeanglefac
++ set edgeanglefaclist { 0.25 0.5 1 1.5 3 }
++ set stloptions.resthedgeanglefac [lindex $edgeanglefaclist $gran]
++
++
++ global stloptions.resthsurfmeshcurvfac
++ set surfmeshcurvlist { 1 1.5 2 3 5 }
++ set stloptions.resthsurfmeshcurvfac [lindex $surfmeshcurvlist $gran]
++
++
++ global options.grading
++ set gradinglist { 0.7 0.5 0.3 0.2 0.1 }
++ set options.grading [lindex $gradinglist $gran]
++
++}
+diff -Naur netgen-5.3.1_SRC_orig/ng/variables.tcl netgen-5.3.1_SRC_modif/ng/variables.tcl
+--- netgen-5.3.1_SRC_orig/ng/variables.tcl 2014-08-29 13:54:01.000000000 +0400
++++ netgen-5.3.1_SRC_modif/ng/variables.tcl 2019-11-14 16:56:26.674332844 +0300
+@@ -1,706 +1,706 @@
+-# netgen global tcl-variables\r
+-\r
+-set drawmode rotate\r
+-set selectvisual geometry\r
+-\r
+-set dirname .\r
+-set loadgeomtypevar "All Geometry types"\r
+-\r
+-set basefilename filename\r
+-\r
+-set meshoptions.fineness 3\r
+-set meshoptions.firststep ag\r
+-set meshoptions.laststep ov\r
+-set options.memory 0\r
+-\r
+-set options.localh 1\r
+-set options.delaunay 1\r
+-set options.checkoverlap 1\r
+-set options.checkoverlappingboundary 0\r
+-set options.checkchartboundary 1\r
+-set options.startinsurface 0\r
+-set options.blockfill 1\r
+-set options.debugmode 0\r
+-set options.dooptimize 1\r
+-set options.parthread 1\r
+-set options.elsizeweight 0.2\r
+-set options.secondorder 0\r
+-set options.elementorder 1\r
+-set options.quad 0\r
+-set options.inverttets 0\r
+-set options.inverttrigs 0\r
+-set options.autozrefine 0\r
+-\r
+-\r
+-set options.meshsize 1000\r
+-set options.minmeshsize 0\r
+-\r
+-set options.curvaturesafety 2\r
+-set options.segmentsperedge 2\r
+-set options.meshsizefilename ""\r
+-set options.badellimit 175\r
+-set options.optsteps2d 3\r
+-set options.optsteps3d 5\r
+-set options.opterrpow 2\r
+-\r
+-set options.grading 0.5\r
+-set options.printmsg 2\r
+-\r
+-set debug.slowchecks 0\r
+-set debug.debugoutput 0\r
+-set debug.haltexistingline 0\r
+-set debug.haltoverlap 0\r
+-set debug.haltsuccess 0\r
+-set debug.haltnosuccess 0\r
+-set debug.haltlargequalclass 0\r
+-set debug.haltsegment 0\r
+-set debug.haltnode 0\r
+-set debug.haltface 0\r
+-set debug.haltfacenr 0\r
+-set debug.haltsegmentp1 0\r
+-set debug.haltsegmentp2 0\r
+-\r
+-set geooptions.drawcsg 1\r
+-set geooptions.detail 0.001\r
+-set geooptions.accuracy 1e-6\r
+-set geooptions.facets 20\r
+-set geooptions.minx -1000\r
+-set geooptions.miny -1000\r
+-set geooptions.minz -1000\r
+-set geooptions.maxx 1000\r
+-set geooptions.maxy 1000\r
+-set geooptions.maxz 1000\r
+-\r
+-set viewqualityplot 0\r
+-set memuseplot 0\r
+-set viewrotatebutton 0\r
+-set showsensitivehelp 0\r
+-set showhelpline 0\r
+-\r
+-set viewoptions.specpointvlen 0.3\r
+-set viewoptions.light.amb 0.3\r
+-set viewoptions.light.diff 0.7\r
+-set viewoptions.light.spec 1\r
+-set viewoptions.light.locviewer 0\r
+-set viewoptions.mat.shininess 50\r
+-set viewoptions.mat.transp 0.3\r
+-set viewoptions.colormeshsize 0\r
+-set viewoptions.whitebackground 1\r
+-set viewoptions.drawcoordinatecross 1\r
+-set viewoptions.drawcolorbar 1\r
+-set viewoptions.drawnetgenlogo 1\r
+-set viewoptions.stereo 0\r
+-set viewoptions.shrink 1\r
+-\r
+-set viewoptions.drawfilledtrigs 1\r
+-set viewoptions.drawedges 0\r
+-set viewoptions.drawbadels 0\r
+-set viewoptions.centerpoint 0\r
+-set viewoptions.drawelement 0\r
+-set viewoptions.drawoutline 1\r
+-set viewoptions.drawtets 0\r
+-set viewoptions.drawtetsdomain 0\r
+-set viewoptions.drawprisms 0\r
+-set viewoptions.drawpyramids 0\r
+-set viewoptions.drawhexes 0\r
+-set viewoptions.drawidentified 0\r
+-set viewoptions.drawpointnumbers 0\r
+-set viewoptions.drawedgenumbers 0\r
+-set viewoptions.drawfacenumbers 0\r
+-set viewoptions.drawelementnumbers 0\r
+-set viewoptions.drawdomainsurf 0\r
+-\r
+-set viewoptions.drawededges 1\r
+-set viewoptions.drawedpoints 1\r
+-set viewoptions.drawedpointnrs 0\r
+-set viewoptions.drawedtangents 0\r
+-set viewoptions.drawededgenrs 0\r
+-set viewoptions.drawmetispartition 0\r
+-\r
+-set viewoptions.drawcurveproj 0\r
+-set viewoptions.drawcurveprojedge 1\r
+-\r
+-set viewoptions.clipping.nx 0\r
+-set viewoptions.clipping.ny 1\r
+-set viewoptions.clipping.nz 0\r
+-set viewoptions.clipping.dist 0\r
+-set viewoptions.clipping.dist2 0\r
+-set viewoptions.clipping.enable 0\r
+-set viewoptions.clipping.onlydomain 0\r
+-set viewoptions.clipping.notdomain 0\r
+-\r
+-set viewoptions.usecentercoords 0\r
+-set viewoptions.centerx 0\r
+-set viewoptions.centery 0\r
+-set viewoptions.centerz 0\r
+-\r
+-set viewoptions.drawspecpoint 0\r
+-set viewoptions.specpointx 0\r
+-set viewoptions.specpointy 0\r
+-set viewoptions.specpointz 0\r
+-\r
+-\r
+-set stloptions.showtrias 0\r
+-set stloptions.showfilledtrias 1\r
+-set stloptions.showedges 1\r
+-set stloptions.showmarktrias 0\r
+-set stloptions.showactivechart 0\r
+-set stloptions.yangle 30\r
+-set stloptions.contyangle 20\r
+-set stloptions.edgecornerangle 60\r
+-set stloptions.chartangle 15\r
+-set stloptions.outerchartangle 70\r
+-set stloptions.usesearchtree 0\r
+-set stloptions.chartnumber 1\r
+-set stloptions.charttrignumber 1\r
+-set stloptions.chartnumberoffset 0\r
+-\r
+-set stloptions.atlasminh 0.1\r
+-set stloptions.resthsurfcurvfac 2\r
+-set stloptions.resthsurfcurvenable 0\r
+-set stloptions.resthatlasfac 2\r
+-set stloptions.resthatlasenable 1\r
+-set stloptions.resthchartdistfac 1.2\r
+-set stloptions.resthchartdistenable 1\r
+-set stloptions.resthlinelengthfac 0.5\r
+-set stloptions.resthlinelengthenable 1\r
+-set stloptions.resthcloseedgefac 1\r
+-set stloptions.resthcloseedgeenable 1\r
+-set stloptions.resthminedgelen 0.01\r
+-set stloptions.resthminedgelenenable 1\r
+-set stloptions.resthedgeanglefac 1\r
+-set stloptions.resthedgeangleenable 0\r
+-set stloptions.resthsurfmeshcurvfac 1\r
+-set stloptions.resthsurfmeshcurvenable 0\r
+-set stloptions.recalchopt 1\r
+-\r
+-set stldoctor.drawmeshededges 1\r
+-set stldoctor.geom_tol_fact 0.000001\r
+-set stldoctor.useexternaledges 0\r
+-set stldoctor.showfaces 0\r
+-set stldoctor.conecheck 1\r
+-set stldoctor.spiralcheck 1\r
+-set stldoctor.selecttrig 0\r
+-set stldoctor.selectmode 1\r
+-set stldoctor.longlinefact 0\r
+-set stldoctor.showexcluded 1\r
+-set stldoctor.edgeselectmode 0\r
+-set stldoctor.nodeofseltrig 1\r
+-set stldoctor.showtouchedtrigchart 0\r
+-set stldoctor.showedgecornerpoints 0\r
+-set stldoctor.showmarkedtrigs 1\r
+-set stldoctor.dirtytrigfact 0.01\r
+-set stldoctor.smoothangle 90\r
+-set stldoctor.selectwithmouse 1\r
+-set stldoctor.showvicinity 0\r
+-set stldoctor.vicinity 50\r
+-set stldoctor.smoothnormalsweight 0.2\r
+-\r
+-set occoptions.showvolumenr 0\r
+-set occoptions.showsurfaces 1\r
+-set occoptions.showedges 1\r
+-set occoptions.showsolidnr 0\r
+-set occoptions.showsolidnr2 0\r
+-set occoptions.visproblemfaces 0\r
+-set occoptions.zoomtohighlightedentity 0\r
+-set occoptions.deflection 1\r
+-set occoptions.tolerance 1e-3\r
+-set occoptions.fixsmalledges 1\r
+-set occoptions.fixspotstripfaces 1\r
+-set occoptions.sewfaces 1\r
+-set occoptions.makesolids 1\r
+-set occoptions.splitpartitions 0\r
+-\r
+-set meshdoctor.active 0\r
+-set meshdoctor.markedgedist 1\r
+-\r
+-\r
+-# variablenname mit punkt problematisch!\r
+-set status_np 0\r
+-set status_ne 0\r
+-set status_nse 0\r
+-set status_working " "\r
+-set status_task " "\r
+-set status_percent 0\r
+-set status_filename 0\r
+-set status_tetqualclasses "10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40"\r
+-\r
+-set exportfiletype "Neutral Format"\r
+-\r
+-set preproc.facenr 0\r
+-set preproc.selectmode query\r
+-set preproc.numtrig 0\r
+-\r
+-set mem_moveable 0\r
+-\r
+-\r
+-set multithread_pause 0\r
+-set multithread_testmode 0\r
+-set multithread_redraw 0\r
+-set multithread_drawing 0\r
+-set multithread_terminate 0\r
+-set multithread_running 0\r
+-\r
+-set level 0\r
+-\r
+-\r
+-set tablesforoutput {}\r
+-\r
+-\r
+-\r
+-set optlist {\r
+- options.localh \r
+- options.delaunay \r
+- options.checkoverlap \r
+- options.startinsurface \r
+- options.blockfill \r
+- options.dooptimize \r
+- options.elsizeweight \r
+- options.meshsize \r
+- options.minmeshsize \r
+- options.curvaturesafety \r
+- options.optsteps2d \r
+- options.optsteps3d \r
+- options.secondorder\r
+-}\r
+-\r
+-\r
+-set visoptions.usetexture 1\r
+-set visoptions.invcolor 0\r
+-set visoptions.imaginary 0\r
+-set visoptions.lineartexture 0\r
+-set visoptions.numtexturecols 16\r
+-set visoptions.showclipsolution 1\r
+-set visoptions.showsurfacesolution 0\r
+-set visoptions.drawfieldlines 0\r
+-set visoptions.drawpointcurves 1\r
+-set visoptions.numfieldlines 100\r
+-set visoptions.fieldlinesrandomstart 0\r
+-set visoptions.fieldlinesstartarea box\r
+-set visoptions.fieldlinesstartareap1x 1\r
+-set visoptions.fieldlinesstartareap1y 1\r
+-set visoptions.fieldlinesstartareap1z 1\r
+-set visoptions.fieldlinesstartareap2x 0\r
+-set visoptions.fieldlinesstartareap2y 0\r
+-set visoptions.fieldlinesstartareap2z 0\r
+-set visoptions.fieldlinesstartface -1\r
+-set visoptions.fieldlinesfilename none\r
+-set visoptions.fieldlinestolerance 0.0005\r
+-set visoptions.fieldlinesrktype crungekutta\r
+-set visoptions.fieldlineslength 0.5\r
+-set visoptions.fieldlinesmaxpoints 500\r
+-set visoptions.fieldlinesthickness 0.0015\r
+-set visoptions.fieldlinesvecfunction none\r
+-set visoptions.fieldlinesphase 0\r
+-set visoptions.fieldlinesonlyonephase 1\r
+-\r
+-\r
+-set visoptions.lineplotfile empty\r
+-set visoptions.lineplotsource file\r
+-set visoptions.lineplotusingx 0\r
+-set visoptions.lineplotusingy 1\r
+-set visoptions.lineplotautoscale 1\r
+-set visoptions.lineplotxmin 0\r
+-set visoptions.lineplotxmax 1\r
+-set visoptions.lineplotymin 0\r
+-set visoptions.lineplotymax 1\r
+-set visoptions.lineplotcurrentnum -1\r
+-set visoptions.lineplotinfos ""\r
+-set visoptions.lineplotselected none\r
+-set visoptions.lineplotselector ""\r
+-set visoptions.lineplotcolor red\r
+-set visoptions.lineplotsizex 500\r
+-set visoptions.lineplotsizey 400\r
+-set visoptions.lineplotselectedeval 0\r
+-set visoptions.lineplotdatadescr "column1 column2 column3"\r
+-set visoptions.lineplotxcoordselector ""\r
+-set visoptions.lineplotycoordselector ""\r
+-set visoptions.evaluatefilenames none\r
+-set visoptions.evaluatefiledescriptions none\r
+-\r
+-\r
+-set visoptions.clipsolution none\r
+-set visoptions.scalfunction none\r
+-set visoptions.vecfunction none\r
+-set visoptions.evaluate abs\r
+-set visoptions.gridsize 20\r
+-set visoptions.xoffset 0\r
+-set visoptions.yoffset 0\r
+-set visoptions.autoscale 1\r
+-set visoptions.redrawperiodic 0\r
+-set visoptions.logscale 0\r
+-set visoptions.mminval 0\r
+-set visoptions.mmaxval 1\r
+-set visoptions.isolines 0\r
+-set visoptions.isosurf 0\r
+-set visoptions.subdivisions 1\r
+-set visoptions.numiso 10\r
+-set visoptions.autoredraw 0\r
+-set visoptions.autoredrawtime 2\r
+-set visoptions.simulationtime 0\r
+-set visoptions.multidimcomponent 0\r
+-\r
+-# deform by vector function\r
+-set visoptions.deformation 0\r
+-set visoptions.scaledeform1 1\r
+-set visoptions.scaledeform2 1\r
+-\r
+-set parallel_netgen 0\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-set optfilename [file join $nguserdir ng.opt]\r
+-set inifilename [file join $nguserdir ng.ini]\r
+-set meshinifilename [file join $nguserdir ngmesh.ini]\r
+-\r
+-global env\r
+-if { [llength [array names env NG_OPT]] == 1 } {\r
+- if { [string length $env(NG_OPT)] > 0 } {\r
+- set optfilename $env(NG_OPT) \r
+- }\r
+-}\r
+-\r
+-if { [file exists $optfilename] == 1 } {\r
+- set datei [open $optfilename r]\r
+- while { [gets $datei line] >= 0 } {\r
+- set [lindex $line 0] [lindex $line 1]\r
+- }\r
+- close $datei\r
+-} {\r
+- puts "optfile $optfilename does not exist - using default values"\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-proc saveoptions { } {\r
+- uplevel 1 {\r
+- set file $optfilename\r
+- \r
+- if {$file != ""} {\r
+- set datei [open $file w]\r
+- puts $datei "dirname ${dirname}"\r
+- puts $datei "loadgeomtypevar \"${loadgeomtypevar}\""\r
+- puts $datei "exportfiletype \"${exportfiletype}\""\r
+- puts $datei "meshoptions.fineness ${meshoptions.fineness}"\r
+- puts $datei "meshoptions.firststep ${meshoptions.firststep}"\r
+- puts $datei "meshoptions.laststep ${meshoptions.laststep}" \r
+- puts $datei "options.localh ${options.localh}"\r
+- puts $datei "options.delaunay ${options.delaunay}"\r
+- puts $datei "options.checkoverlap ${options.checkoverlap}"\r
+- puts $datei "options.checkchartboundary ${options.checkchartboundary}"\r
+- puts $datei "options.startinsurface ${options.startinsurface}" \r
+- puts $datei "options.blockfill ${options.blockfill}" \r
+- puts $datei "options.debugmode ${options.debugmode}" \r
+- puts $datei "options.dooptimize ${options.dooptimize}" \r
+- puts $datei "options.parthread ${options.parthread}" \r
+- puts $datei "options.elsizeweight ${options.elsizeweight}" \r
+- puts $datei "options.secondorder ${options.secondorder}" \r
+- puts $datei "options.elementorder ${options.elementorder}" \r
+-# puts $datei "options.memory ${options.memory}" \r
+- puts $datei "options.quad ${options.quad}" \r
+- puts $datei "options.inverttets ${options.inverttets}" \r
+- puts $datei "options.inverttrigs ${options.inverttrigs}" \r
+- puts $datei "options.autozrefine ${options.autozrefine}" \r
+- puts $datei "options.meshsize ${options.meshsize}" \r
+- puts $datei "options.minmeshsize ${options.minmeshsize}" \r
+- puts $datei "options.curvaturesafety ${options.curvaturesafety}" \r
+- puts $datei "options.segmentsperedge ${options.segmentsperedge}" \r
+- puts $datei "options.meshsizefilename ${options.meshsizefilename}" \r
+- puts $datei "options.badellimit ${options.badellimit}" \r
+- puts $datei "options.optsteps2d ${options.optsteps2d}" \r
+- puts $datei "options.optsteps3d ${options.optsteps3d}" \r
+- puts $datei "options.opterrpow ${options.opterrpow}" \r
+- puts $datei "options.grading ${options.grading}" \r
+- puts $datei "options.printmsg ${options.printmsg}" \r
+- puts $datei "geooptions.drawcsg ${geooptions.drawcsg}" \r
+- puts $datei "geooptions.detail ${geooptions.detail}" \r
+- puts $datei "geooptions.accuracy ${geooptions.accuracy}" \r
+- puts $datei "geooptions.facets ${geooptions.facets}" \r
+- puts $datei "geooptions.minx ${geooptions.minx}" \r
+- puts $datei "geooptions.miny ${geooptions.miny}" \r
+- puts $datei "geooptions.minz ${geooptions.minz}" \r
+- puts $datei "geooptions.maxx ${geooptions.maxx}" \r
+- puts $datei "geooptions.maxy ${geooptions.maxy}" \r
+- puts $datei "geooptions.maxz ${geooptions.maxz}" \r
+- puts $datei "viewoptions.specpointvlen ${viewoptions.specpointvlen}" \r
+- puts $datei "viewoptions.light.amb ${viewoptions.light.amb}" \r
+- puts $datei "viewoptions.light.diff ${viewoptions.light.diff}"\r
+- puts $datei "viewoptions.light.spec ${viewoptions.light.spec}"\r
+- puts $datei "viewoptions.light.locviewer ${viewoptions.light.locviewer}"\r
+- puts $datei "viewoptions.mat.shininess ${viewoptions.mat.shininess}" \r
+- puts $datei "viewoptions.mat.transp ${viewoptions.mat.transp}" \r
+- puts $datei "viewoptions.colormeshsize ${viewoptions.colormeshsize}"\r
+- puts $datei "viewoptions.whitebackground ${viewoptions.whitebackground}" \r
+- puts $datei "viewoptions.drawcolorbar ${viewoptions.drawcolorbar}" \r
+- puts $datei "viewoptions.drawcoordinatecross ${viewoptions.drawcoordinatecross}" \r
+- puts $datei "viewoptions.drawnetgenlogo ${viewoptions.drawnetgenlogo}" \r
+- puts $datei "viewoptions.stereo ${viewoptions.stereo}" \r
+- puts $datei "viewoptions.drawfilledtrigs ${viewoptions.drawfilledtrigs}" \r
+- puts $datei "viewoptions.drawedges ${viewoptions.drawedges}" \r
+- puts $datei "viewoptions.drawbadels ${viewoptions.drawbadels}" \r
+- puts $datei "viewoptions.centerpoint ${viewoptions.centerpoint}" \r
+- puts $datei "viewoptions.drawelement ${viewoptions.drawelement}" \r
+- puts $datei "viewoptions.drawoutline ${viewoptions.drawoutline}" \r
+- puts $datei "viewoptions.drawtets ${viewoptions.drawtets}"\r
+- puts $datei "viewoptions.drawprisms ${viewoptions.drawprisms}"\r
+- puts $datei "viewoptions.drawpyramids ${viewoptions.drawpyramids}" \r
+- puts $datei "viewoptions.drawhexes ${viewoptions.drawhexes}" \r
+- puts $datei "viewoptions.drawidentified ${viewoptions.drawidentified}" \r
+- puts $datei "viewoptions.drawpointnumbers ${viewoptions.drawpointnumbers}" \r
+- \r
+- puts $datei "viewoptions.drawededges ${viewoptions.drawededges}" \r
+- puts $datei "viewoptions.drawedpoints ${viewoptions.drawedpoints}" \r
+- puts $datei "viewoptions.drawedpointnrs ${viewoptions.drawedpointnrs}" \r
+- puts $datei "viewoptions.drawedtangents ${viewoptions.drawedtangents}" \r
+- puts $datei "viewoptions.shrink ${viewoptions.shrink}" \r
+- \r
+- puts $datei "stloptions.showtrias ${stloptions.showtrias}" \r
+- puts $datei "stloptions.showfilledtrias ${stloptions.showfilledtrias}" \r
+- puts $datei "stloptions.showedges ${stloptions.showedges}" \r
+- puts $datei "stloptions.showmarktrias ${stloptions.showmarktrias}" \r
+- puts $datei "stloptions.showactivechart ${stloptions.showactivechart}" \r
+- puts $datei "stloptions.yangle ${stloptions.yangle}" \r
+- puts $datei "stloptions.contyangle ${stloptions.contyangle}" \r
+- puts $datei "stloptions.edgecornerangle ${stloptions.edgecornerangle}" \r
+- puts $datei "stloptions.chartangle ${stloptions.chartangle}" \r
+- puts $datei "stloptions.outerchartangle ${stloptions.outerchartangle}" \r
+- puts $datei "stloptions.usesearchtree ${stloptions.usesearchtree}" \r
+- puts $datei "stloptions.chartnumber ${stloptions.chartnumber}" \r
+- puts $datei "stloptions.charttrignumber ${stloptions.charttrignumber}" \r
+- puts $datei "stloptions.chartnumberoffset ${stloptions.chartnumberoffset}" \r
+- puts $datei "stloptions.atlasminh ${stloptions.atlasminh}" \r
+- puts $datei "stloptions.resthsurfcurvfac ${stloptions.resthsurfcurvfac}" \r
+- puts $datei "stloptions.resthsurfcurvenable ${stloptions.resthsurfcurvenable}" \r
+- puts $datei "stloptions.resthatlasfac ${stloptions.resthatlasfac}" \r
+- puts $datei "stloptions.resthatlasenable ${stloptions.resthatlasenable}" \r
+- puts $datei "stloptions.resthchartdistfac ${stloptions.resthchartdistfac}" \r
+- puts $datei "stloptions.resthchartdistenable ${stloptions.resthchartdistenable}" \r
+- puts $datei "stloptions.resthlinelengthfac ${stloptions.resthlinelengthfac}" \r
+- puts $datei "stloptions.resthlinelengthenable ${stloptions.resthlinelengthenable}" \r
+- puts $datei "stloptions.resthminedgelen ${stloptions.resthminedgelen}"\r
+- puts $datei "stloptions.resthminedgelenenable ${stloptions.resthminedgelenenable}"\r
+- puts $datei "stloptions.resthcloseedgefac ${stloptions.resthcloseedgefac}" \r
+- puts $datei "stloptions.resthcloseedgeenable ${stloptions.resthcloseedgeenable}" \r
+- puts $datei "stloptions.resthedgeanglefac ${stloptions.resthedgeanglefac}" \r
+- puts $datei "stloptions.resthedgeangleenable ${stloptions.resthedgeangleenable}" \r
+- puts $datei "stloptions.resthsurfmeshcurvfac ${stloptions.resthsurfmeshcurvfac}" \r
+- puts $datei "stloptions.resthsurfmeshcurvenable ${stloptions.resthsurfmeshcurvenable}" \r
+- puts $datei "stloptions.recalchopt ${stloptions.recalchopt}" \r
+- \r
+- puts $datei "visoptions.subdivisions ${visoptions.subdivisions}"\r
+- puts $datei "visoptions.autoredraw ${visoptions.autoredraw}"\r
+- puts $datei "visoptions.autoredrawtime ${visoptions.autoredrawtime}"\r
+-\r
+-\r
+- # trafo options \r
+- # if exist trafooptions then ...\r
+- if { [info exists trafooptions.solver] == 1 } {\r
+- puts $datei "trafooptions.solver ${trafooptions.solver}" \r
+- puts $datei "trafooptions.levels ${trafooptions.levels}" \r
+- puts $datei "trafooptions.linits ${trafooptions.linits}" \r
+- puts $datei "trafooptions.nonlinits ${trafooptions.nonlinits}" \r
+- puts $datei "trafooptions.stabcurrent ${trafooptions.stabcurrent}" \r
+- puts $datei "trafooptions.checkcond ${trafooptions.checkcond}" \r
+- puts $datei "trafooptions.maxdirect ${trafooptions.maxdirect}" \r
+- puts $datei "trafooptions.secondorder ${trafooptions.secondorder}" \r
+- puts $datei "trafooptions.homogenizedcore ${trafooptions.homogenizedcore}" \r
+- puts $datei "trafooptions.ordercore ${trafooptions.ordercore}" \r
+- puts $datei "trafooptions.simplecurrents ${trafooptions.simplecurrents}" \r
+- puts $datei "trafooptions.assemblecomplexmatrix ${trafooptions.assemblecomplexmatrix}" \r
+-\r
+- puts $datei "trafooptions.meshcasing ${trafooptions.meshcasing}" \r
+- puts $datei "trafooptions.meshcore ${trafooptions.meshcore}" \r
+- puts $datei "trafooptions.meshclumps ${trafooptions.meshclumps}" \r
+- puts $datei "trafooptions.meshshields ${trafooptions.meshshields}" \r
+- puts $datei "trafooptions.meshcoils ${trafooptions.meshcoils}" \r
+- puts $datei "trafooptions.bcmdirectory ${trafooptions.bcmdirectory}" \r
+- puts $datei "trafooptions.lossdensityfile ${trafooptions.lossdensityfile}" \r
+- }\r
+-\r
+- if { [info exists smalltrafomodell.tankheight] == 1 } {\r
+- puts $datei "smalltrafomodell.tankheight ${smalltrafomodell.tankheight}"\r
+- puts $datei "smalltrafomodell.tankwidth ${smalltrafomodell.tankwidth}"\r
+- puts $datei "smalltrafomodell.tanklength ${smalltrafomodell.tanklength}"\r
+- puts $datei "smalltrafomodell.corewidth ${smalltrafomodell.corewidth}"\r
+- puts $datei "smalltrafomodell.windowheight ${smalltrafomodell.windowheight}"\r
+- puts $datei "smalltrafomodell.limbdistance ${smalltrafomodell.limbdistance}"\r
+- puts $datei "smalltrafomodell.xposcore ${smalltrafomodell.xposcore}"\r
+- puts $datei "smalltrafomodell.yposcore ${smalltrafomodell.yposcore}"\r
+- puts $datei "smalltrafomodell.zposcore ${smalltrafomodell.zposcore}"\r
+- puts $datei "smalltrafomodell.leakagefluxguidethickness ${smalltrafomodell.leakagefluxguidethickness}"\r
+- puts $datei "smalltrafomodell.leakagefluxguidewidth ${smalltrafomodell.leakagefluxguidewidth}"\r
+- puts $datei "smalltrafomodell.leakagefluxguidezposition ${smalltrafomodell.leakagefluxguidezposition}"\r
+- puts $datei "smalltrafomodell.limbcoil.1 ${smalltrafomodell.limbcoil.1}"\r
+- puts $datei "smalltrafomodell.ricoil.1 ${smalltrafomodell.ricoil.1}"\r
+- puts $datei "smalltrafomodell.rocoil.1 ${smalltrafomodell.rocoil.1}"\r
+- puts $datei "smalltrafomodell.zposcoil.1 ${smalltrafomodell.zposcoil.1}"\r
+- puts $datei "smalltrafomodell.heightcoil.1 ${smalltrafomodell.heightcoil.1}"\r
+- puts $datei "smalltrafomodell.currentcoil.1 ${smalltrafomodell.currentcoil.1}"\r
+- puts $datei "smalltrafomodell.nturnscoil.1 ${smalltrafomodell.nturnscoil.1}"\r
+- puts $datei "smalltrafomodell.limbcoil.2 ${smalltrafomodell.limbcoil.2}"\r
+- puts $datei "smalltrafomodell.ricoil.2 ${smalltrafomodell.ricoil.2}"\r
+- puts $datei "smalltrafomodell.rocoil.2 ${smalltrafomodell.rocoil.2}"\r
+- puts $datei "smalltrafomodell.zposcoil.2 ${smalltrafomodell.zposcoil.2}"\r
+- puts $datei "smalltrafomodell.heightcoil.2 ${smalltrafomodell.heightcoil.2}"\r
+- puts $datei "smalltrafomodell.currentcoil.2 ${smalltrafomodell.currentcoil.2}"\r
+- puts $datei "smalltrafomodell.nturnscoil.2 ${smalltrafomodell.nturnscoil.2}"\r
+- puts $datei "smalltrafomodell.limbcoil.3 ${smalltrafomodell.limbcoil.3}"\r
+- puts $datei "smalltrafomodell.ricoil.3 ${smalltrafomodell.ricoil.3}"\r
+- puts $datei "smalltrafomodell.rocoil.3 ${smalltrafomodell.rocoil.3}"\r
+- puts $datei "smalltrafomodell.zposcoil.3 ${smalltrafomodell.zposcoil.3}"\r
+- puts $datei "smalltrafomodell.heightcoil.3 ${smalltrafomodell.heightcoil.3}"\r
+- puts $datei "smalltrafomodell.currentcoil.3 ${smalltrafomodell.currentcoil.3}"\r
+- puts $datei "smalltrafomodell.nturnscoil.3 ${smalltrafomodell.nturnscoil.3}"\r
+- puts $datei "smalltrafomodell.limbcoil.4 ${smalltrafomodell.limbcoil.4}"\r
+- puts $datei "smalltrafomodell.ricoil.4 ${smalltrafomodell.ricoil.4}"\r
+- puts $datei "smalltrafomodell.rocoil.4 ${smalltrafomodell.rocoil.4}"\r
+- puts $datei "smalltrafomodell.zposcoil.4 ${smalltrafomodell.zposcoil.4}"\r
+- puts $datei "smalltrafomodell.heightcoil.4 ${smalltrafomodell.heightcoil.4}"\r
+- puts $datei "smalltrafomodell.currentcoil.4 ${smalltrafomodell.currentcoil.4}"\r
+- puts $datei "smalltrafomodell.nturnscoil.4 ${smalltrafomodell.nturnscoil.4}"\r
+- puts $datei "smalltrafomodell.limbcoil.5 ${smalltrafomodell.limbcoil.5}"\r
+- puts $datei "smalltrafomodell.ricoil.5 ${smalltrafomodell.ricoil.5}"\r
+- puts $datei "smalltrafomodell.rocoil.5 ${smalltrafomodell.rocoil.5}"\r
+- puts $datei "smalltrafomodell.zposcoil.5 ${smalltrafomodell.zposcoil.5}"\r
+- puts $datei "smalltrafomodell.heightcoil.5 ${smalltrafomodell.heightcoil.5}"\r
+- puts $datei "smalltrafomodell.currentcoil.5 ${smalltrafomodell.currentcoil.5}"\r
+- puts $datei "smalltrafomodell.nturnscoil.5 ${smalltrafomodell.nturnscoil.5}"\r
+- puts $datei "smalltrafomodell.limbcoil.6 ${smalltrafomodell.limbcoil.6}"\r
+- puts $datei "smalltrafomodell.ricoil.6 ${smalltrafomodell.ricoil.6}"\r
+- puts $datei "smalltrafomodell.rocoil.6 ${smalltrafomodell.rocoil.6}"\r
+- puts $datei "smalltrafomodell.zposcoil.6 ${smalltrafomodell.zposcoil.6}"\r
+- puts $datei "smalltrafomodell.heightcoil.6 ${smalltrafomodell.heightcoil.6}"\r
+- puts $datei "smalltrafomodell.currentcoil.6 ${smalltrafomodell.currentcoil.6}"\r
+- puts $datei "smalltrafomodell.nturnscoil.6 ${smalltrafomodell.nturnscoil.6}"\r
+- puts $datei "smalltrafomodell.limbtest.1 ${smalltrafomodell.limbtest.1}"\r
+- puts $datei "smalltrafomodell.heighttest.1 ${smalltrafomodell.heighttest.1}"\r
+- puts $datei "smalltrafomodell.widthtest.1 ${smalltrafomodell.widthtest.1}"\r
+- puts $datei "smalltrafomodell.rtest.1 ${smalltrafomodell.rtest.1}"\r
+- puts $datei "smalltrafomodell.zpostest.1 ${smalltrafomodell.zpostest.1}"\r
+- puts $datei "smalltrafomodell.edgeradiustest.1 ${smalltrafomodell.edgeradiustest.1}"\r
+- puts $datei "smalltrafomodell.finetest.1 ${smalltrafomodell.finetest.1}"\r
+- puts $datei "smalltrafomodell.conductivetest.1 ${smalltrafomodell.conductivetest.1}"\r
+- puts $datei "smalltrafomodell.limbtest.2 ${smalltrafomodell.limbtest.2}"\r
+- puts $datei "smalltrafomodell.heighttest.2 ${smalltrafomodell.heighttest.2}"\r
+- puts $datei "smalltrafomodell.widthtest.2 ${smalltrafomodell.widthtest.2}"\r
+- puts $datei "smalltrafomodell.rtest.2 ${smalltrafomodell.rtest.2}"\r
+- puts $datei "smalltrafomodell.zpostest.2 ${smalltrafomodell.zpostest.2}"\r
+- puts $datei "smalltrafomodell.edgeradiustest.2 ${smalltrafomodell.edgeradiustest.2}"\r
+- puts $datei "smalltrafomodell.finetest.2 ${smalltrafomodell.finetest.2}"\r
+- puts $datei "smalltrafomodell.conductivetest.2 ${smalltrafomodell.conductivetest.2}"\r
+- puts $datei "smalltrafomodell.limbtest.3 ${smalltrafomodell.limbtest.3}"\r
+- puts $datei "smalltrafomodell.heighttest.3 ${smalltrafomodell.heighttest.3}"\r
+- puts $datei "smalltrafomodell.widthtest.3 ${smalltrafomodell.widthtest.3}"\r
+- puts $datei "smalltrafomodell.rtest.3 ${smalltrafomodell.rtest.3}"\r
+- puts $datei "smalltrafomodell.zpostest.3 ${smalltrafomodell.zpostest.3}"\r
+- puts $datei "smalltrafomodell.edgeradiustest.3 ${smalltrafomodell.edgeradiustest.3}"\r
+- puts $datei "smalltrafomodell.finetest.3 ${smalltrafomodell.finetest.3}"\r
+- puts $datei "smalltrafomodell.conductivetest.3 ${smalltrafomodell.conductivetest.3}"\r
+- puts $datei "smalltrafomodell.limbtest.4 ${smalltrafomodell.limbtest.4}"\r
+- puts $datei "smalltrafomodell.heighttest.4 ${smalltrafomodell.heighttest.4}"\r
+- puts $datei "smalltrafomodell.widthtest.4 ${smalltrafomodell.widthtest.4}"\r
+- puts $datei "smalltrafomodell.rtest.4 ${smalltrafomodell.rtest.4}"\r
+- puts $datei "smalltrafomodell.zpostest.4 ${smalltrafomodell.zpostest.4}"\r
+- puts $datei "smalltrafomodell.edgeradiustest.4 ${smalltrafomodell.edgeradiustest.4}"\r
+- puts $datei "smalltrafomodell.finetest.4 ${smalltrafomodell.finetest.4}"\r
+- puts $datei "smalltrafomodell.conductivetest.4 ${smalltrafomodell.conductivetest.4}"\r
+- puts $datei "smalltrafomodell.nperitest ${smalltrafomodell.nperitest}"\r
+- puts $datei "smalltrafomodell.filename ${smalltrafomodell.filename}"\r
+- puts $datei "smalltrafomodell.murlfguide ${smalltrafomodell.murlfguide}"\r
+- puts $datei "smalltrafomodell.murtestwire ${smalltrafomodell.murtestwire}"\r
+- puts $datei "smalltrafomodell.murcore ${smalltrafomodell.murcore}"\r
+- puts $datei "smalltrafomodell.kappalfguide ${smalltrafomodell.kappalfguide}"\r
+- puts $datei "smalltrafomodell.kappatestwire ${smalltrafomodell.kappatestwire}"\r
+- puts $datei "smalltrafomodell.kappacore ${smalltrafomodell.kappacore}"\r
+- }\r
+- \r
+- \r
+- close $datei\r
+- }\r
+- }\r
+-}\r
+-\r
+-\r
+-\r
+-\r
+-# the ini file is saved on demand :\r
+-proc saveinifile { } {\r
+- global inifilename\r
+- if {[catch { set datei [open $inifilename w] } result ]} {\r
+- puts "cannot write file $inifilename"\r
+- } {\r
+- for { set i [.ngmenu.file.recent index last] } { $i >= 1 } { incr i -1 } {\r
+- puts $datei "recentfile \"[.ngmenu.file.recent entrycget $i -label]\""\r
+- }\r
+- close $datei\r
+- } \r
+-}\r
+-\r
+-\r
+-proc savemeshinifile { } {\r
+- global meshinifilename \r
+- if {[catch { set datei [open $meshinifilename w] } result ]} {\r
+- puts "cannot write file $meshinifilename"\r
+- } {\r
+- for { set i [.ngmenu.file.recentmesh index last] } { $i >= 1 } { incr i -1 } {\r
+- puts $datei "recentfile \"[.ngmenu.file.recentmesh entrycget $i -label]\""\r
+- }\r
+- close $datei\r
+- } \r
+-}\r
+-\r
+-\r
+-\r
+-proc loadinifile { } { \r
+- global inifilename\r
+- if { [file exists $inifilename] == 1 } {\r
+- set datei [open $inifilename r]\r
+- while { [gets $datei line] >= 0 } {\r
+- if {[lindex $line 0] == "recentfile"} {\r
+- set filename [lindex $line 1]\r
+- if { [file exists $filename] == 1 } {\r
+- AddRecentFile $filename\r
+- } \r
+- }\r
+- }\r
+- close $datei\r
+- }\r
+-}\r
+-\r
+-\r
+-proc loadmeshinifile { } {\r
+- global meshinifilename\r
+- if { [file exists $meshinifilename] == 1 } {\r
+- set datei [open $meshinifilename r]\r
+- while { [gets $datei line] >= 0 } {\r
+- if {[lindex $line 0] == "recentfile"} {\r
+- set filename [lindex $line 1]\r
+- if { [file exists $filename] == 1 } {\r
+- AddRecentMeshFile $filename\r
+- } \r
+- }\r
+- }\r
+- close $datei\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-\r
+-set cmdindex {}\r
+-set hlpindex {}\r
+-set secindex {}\r
++# netgen global tcl-variables
++
++set drawmode rotate
++set selectvisual geometry
++
++set dirname .
++set loadgeomtypevar "All Geometry types"
++
++set basefilename filename
++
++set meshoptions.fineness 3
++set meshoptions.firststep ag
++set meshoptions.laststep ov
++set options.memory 0
++
++set options.localh 1
++set options.delaunay 1
++set options.checkoverlap 1
++set options.checkoverlappingboundary 0
++set options.checkchartboundary 1
++set options.startinsurface 0
++set options.blockfill 1
++set options.debugmode 0
++set options.dooptimize 1
++set options.parthread 1
++set options.elsizeweight 0.2
++set options.secondorder 0
++set options.elementorder 1
++set options.quad 0
++set options.inverttets 0
++set options.inverttrigs 0
++set options.autozrefine 0
++
++
++set options.meshsize 1000
++set options.minmeshsize 0
++
++set options.curvaturesafety 2
++set options.segmentsperedge 2
++set options.meshsizefilename ""
++set options.badellimit 175
++set options.optsteps2d 3
++set options.optsteps3d 5
++set options.opterrpow 2
++
++set options.grading 0.5
++set options.printmsg 2
++
++set debug.slowchecks 0
++set debug.debugoutput 0
++set debug.haltexistingline 0
++set debug.haltoverlap 0
++set debug.haltsuccess 0
++set debug.haltnosuccess 0
++set debug.haltlargequalclass 0
++set debug.haltsegment 0
++set debug.haltnode 0
++set debug.haltface 0
++set debug.haltfacenr 0
++set debug.haltsegmentp1 0
++set debug.haltsegmentp2 0
++
++set geooptions.drawcsg 1
++set geooptions.detail 0.001
++set geooptions.accuracy 1e-6
++set geooptions.facets 20
++set geooptions.minx -1000
++set geooptions.miny -1000
++set geooptions.minz -1000
++set geooptions.maxx 1000
++set geooptions.maxy 1000
++set geooptions.maxz 1000
++
++set viewqualityplot 0
++set memuseplot 0
++set viewrotatebutton 0
++set showsensitivehelp 0
++set showhelpline 0
++
++set viewoptions.specpointvlen 0.3
++set viewoptions.light.amb 0.3
++set viewoptions.light.diff 0.7
++set viewoptions.light.spec 1
++set viewoptions.light.locviewer 0
++set viewoptions.mat.shininess 50
++set viewoptions.mat.transp 0.3
++set viewoptions.colormeshsize 0
++set viewoptions.whitebackground 1
++set viewoptions.drawcoordinatecross 1
++set viewoptions.drawcolorbar 1
++set viewoptions.drawnetgenlogo 1
++set viewoptions.stereo 0
++set viewoptions.shrink 1
++
++set viewoptions.drawfilledtrigs 1
++set viewoptions.drawedges 0
++set viewoptions.drawbadels 0
++set viewoptions.centerpoint 0
++set viewoptions.drawelement 0
++set viewoptions.drawoutline 1
++set viewoptions.drawtets 0
++set viewoptions.drawtetsdomain 0
++set viewoptions.drawprisms 0
++set viewoptions.drawpyramids 0
++set viewoptions.drawhexes 0
++set viewoptions.drawidentified 0
++set viewoptions.drawpointnumbers 0
++set viewoptions.drawedgenumbers 0
++set viewoptions.drawfacenumbers 0
++set viewoptions.drawelementnumbers 0
++set viewoptions.drawdomainsurf 0
++
++set viewoptions.drawededges 1
++set viewoptions.drawedpoints 1
++set viewoptions.drawedpointnrs 0
++set viewoptions.drawedtangents 0
++set viewoptions.drawededgenrs 0
++set viewoptions.drawmetispartition 0
++
++set viewoptions.drawcurveproj 0
++set viewoptions.drawcurveprojedge 1
++
++set viewoptions.clipping.nx 0
++set viewoptions.clipping.ny 1
++set viewoptions.clipping.nz 0
++set viewoptions.clipping.dist 0
++set viewoptions.clipping.dist2 0
++set viewoptions.clipping.enable 0
++set viewoptions.clipping.onlydomain 0
++set viewoptions.clipping.notdomain 0
++
++set viewoptions.usecentercoords 0
++set viewoptions.centerx 0
++set viewoptions.centery 0
++set viewoptions.centerz 0
++
++set viewoptions.drawspecpoint 0
++set viewoptions.specpointx 0
++set viewoptions.specpointy 0
++set viewoptions.specpointz 0
++
++
++set stloptions.showtrias 0
++set stloptions.showfilledtrias 1
++set stloptions.showedges 1
++set stloptions.showmarktrias 0
++set stloptions.showactivechart 0
++set stloptions.yangle 30
++set stloptions.contyangle 20
++set stloptions.edgecornerangle 60
++set stloptions.chartangle 15
++set stloptions.outerchartangle 70
++set stloptions.usesearchtree 0
++set stloptions.chartnumber 1
++set stloptions.charttrignumber 1
++set stloptions.chartnumberoffset 0
++
++set stloptions.atlasminh 0.1
++set stloptions.resthsurfcurvfac 2
++set stloptions.resthsurfcurvenable 0
++set stloptions.resthatlasfac 2
++set stloptions.resthatlasenable 1
++set stloptions.resthchartdistfac 1.2
++set stloptions.resthchartdistenable 1
++set stloptions.resthlinelengthfac 0.5
++set stloptions.resthlinelengthenable 1
++set stloptions.resthcloseedgefac 1
++set stloptions.resthcloseedgeenable 1
++set stloptions.resthminedgelen 0.01
++set stloptions.resthminedgelenenable 1
++set stloptions.resthedgeanglefac 1
++set stloptions.resthedgeangleenable 0
++set stloptions.resthsurfmeshcurvfac 1
++set stloptions.resthsurfmeshcurvenable 0
++set stloptions.recalchopt 1
++
++set stldoctor.drawmeshededges 1
++set stldoctor.geom_tol_fact 0.000001
++set stldoctor.useexternaledges 0
++set stldoctor.showfaces 0
++set stldoctor.conecheck 1
++set stldoctor.spiralcheck 1
++set stldoctor.selecttrig 0
++set stldoctor.selectmode 1
++set stldoctor.longlinefact 0
++set stldoctor.showexcluded 1
++set stldoctor.edgeselectmode 0
++set stldoctor.nodeofseltrig 1
++set stldoctor.showtouchedtrigchart 0
++set stldoctor.showedgecornerpoints 0
++set stldoctor.showmarkedtrigs 1
++set stldoctor.dirtytrigfact 0.01
++set stldoctor.smoothangle 90
++set stldoctor.selectwithmouse 1
++set stldoctor.showvicinity 0
++set stldoctor.vicinity 50
++set stldoctor.smoothnormalsweight 0.2
++
++set occoptions.showvolumenr 0
++set occoptions.showsurfaces 1
++set occoptions.showedges 1
++set occoptions.showsolidnr 0
++set occoptions.showsolidnr2 0
++set occoptions.visproblemfaces 0
++set occoptions.zoomtohighlightedentity 0
++set occoptions.deflection 1
++set occoptions.tolerance 1e-3
++set occoptions.fixsmalledges 1
++set occoptions.fixspotstripfaces 1
++set occoptions.sewfaces 1
++set occoptions.makesolids 1
++set occoptions.splitpartitions 0
++
++set meshdoctor.active 0
++set meshdoctor.markedgedist 1
++
++
++# variablenname mit punkt problematisch!
++set status_np 0
++set status_ne 0
++set status_nse 0
++set status_working " "
++set status_task " "
++set status_percent 0
++set status_filename 0
++set status_tetqualclasses "10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40"
++
++set exportfiletype "Neutral Format"
++
++set preproc.facenr 0
++set preproc.selectmode query
++set preproc.numtrig 0
++
++set mem_moveable 0
++
++
++set multithread_pause 0
++set multithread_testmode 0
++set multithread_redraw 0
++set multithread_drawing 0
++set multithread_terminate 0
++set multithread_running 0
++
++set level 0
++
++
++set tablesforoutput {}
++
++
++
++set optlist {
++ options.localh
++ options.delaunay
++ options.checkoverlap
++ options.startinsurface
++ options.blockfill
++ options.dooptimize
++ options.elsizeweight
++ options.meshsize
++ options.minmeshsize
++ options.curvaturesafety
++ options.optsteps2d
++ options.optsteps3d
++ options.secondorder
++}
++
++
++set visoptions.usetexture 1
++set visoptions.invcolor 0
++set visoptions.imaginary 0
++set visoptions.lineartexture 0
++set visoptions.numtexturecols 16
++set visoptions.showclipsolution 1
++set visoptions.showsurfacesolution 0
++set visoptions.drawfieldlines 0
++set visoptions.drawpointcurves 1
++set visoptions.numfieldlines 100
++set visoptions.fieldlinesrandomstart 0
++set visoptions.fieldlinesstartarea box
++set visoptions.fieldlinesstartareap1x 1
++set visoptions.fieldlinesstartareap1y 1
++set visoptions.fieldlinesstartareap1z 1
++set visoptions.fieldlinesstartareap2x 0
++set visoptions.fieldlinesstartareap2y 0
++set visoptions.fieldlinesstartareap2z 0
++set visoptions.fieldlinesstartface -1
++set visoptions.fieldlinesfilename none
++set visoptions.fieldlinestolerance 0.0005
++set visoptions.fieldlinesrktype crungekutta
++set visoptions.fieldlineslength 0.5
++set visoptions.fieldlinesmaxpoints 500
++set visoptions.fieldlinesthickness 0.0015
++set visoptions.fieldlinesvecfunction none
++set visoptions.fieldlinesphase 0
++set visoptions.fieldlinesonlyonephase 1
++
++
++set visoptions.lineplotfile empty
++set visoptions.lineplotsource file
++set visoptions.lineplotusingx 0
++set visoptions.lineplotusingy 1
++set visoptions.lineplotautoscale 1
++set visoptions.lineplotxmin 0
++set visoptions.lineplotxmax 1
++set visoptions.lineplotymin 0
++set visoptions.lineplotymax 1
++set visoptions.lineplotcurrentnum -1
++set visoptions.lineplotinfos ""
++set visoptions.lineplotselected none
++set visoptions.lineplotselector ""
++set visoptions.lineplotcolor red
++set visoptions.lineplotsizex 500
++set visoptions.lineplotsizey 400
++set visoptions.lineplotselectedeval 0
++set visoptions.lineplotdatadescr "column1 column2 column3"
++set visoptions.lineplotxcoordselector ""
++set visoptions.lineplotycoordselector ""
++set visoptions.evaluatefilenames none
++set visoptions.evaluatefiledescriptions none
++
++
++set visoptions.clipsolution none
++set visoptions.scalfunction none
++set visoptions.vecfunction none
++set visoptions.evaluate abs
++set visoptions.gridsize 20
++set visoptions.xoffset 0
++set visoptions.yoffset 0
++set visoptions.autoscale 1
++set visoptions.redrawperiodic 0
++set visoptions.logscale 0
++set visoptions.mminval 0
++set visoptions.mmaxval 1
++set visoptions.isolines 0
++set visoptions.isosurf 0
++set visoptions.subdivisions 1
++set visoptions.numiso 10
++set visoptions.autoredraw 0
++set visoptions.autoredrawtime 2
++set visoptions.simulationtime 0
++set visoptions.multidimcomponent 0
++
++# deform by vector function
++set visoptions.deformation 0
++set visoptions.scaledeform1 1
++set visoptions.scaledeform2 1
++
++set parallel_netgen 0
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++set optfilename [file join $nguserdir ng.opt]
++set inifilename [file join $nguserdir ng.ini]
++set meshinifilename [file join $nguserdir ngmesh.ini]
++
++global env
++if { [llength [array names env NG_OPT]] == 1 } {
++ if { [string length $env(NG_OPT)] > 0 } {
++ set optfilename $env(NG_OPT)
++ }
++}
++
++if { [file exists $optfilename] == 1 } {
++ set datei [open $optfilename r]
++ while { [gets $datei line] >= 0 } {
++ set [lindex $line 0] [lindex $line 1]
++ }
++ close $datei
++} {
++ puts "optfile $optfilename does not exist - using default values"
++}
++
++
++
++
++proc saveoptions { } {
++ uplevel 1 {
++ set file $optfilename
++
++ if {$file != ""} {
++ set datei [open $file w]
++ puts $datei "dirname ${dirname}"
++ puts $datei "loadgeomtypevar \"${loadgeomtypevar}\""
++ puts $datei "exportfiletype \"${exportfiletype}\""
++ puts $datei "meshoptions.fineness ${meshoptions.fineness}"
++ puts $datei "meshoptions.firststep ${meshoptions.firststep}"
++ puts $datei "meshoptions.laststep ${meshoptions.laststep}"
++ puts $datei "options.localh ${options.localh}"
++ puts $datei "options.delaunay ${options.delaunay}"
++ puts $datei "options.checkoverlap ${options.checkoverlap}"
++ puts $datei "options.checkchartboundary ${options.checkchartboundary}"
++ puts $datei "options.startinsurface ${options.startinsurface}"
++ puts $datei "options.blockfill ${options.blockfill}"
++ puts $datei "options.debugmode ${options.debugmode}"
++ puts $datei "options.dooptimize ${options.dooptimize}"
++ puts $datei "options.parthread ${options.parthread}"
++ puts $datei "options.elsizeweight ${options.elsizeweight}"
++ puts $datei "options.secondorder ${options.secondorder}"
++ puts $datei "options.elementorder ${options.elementorder}"
++# puts $datei "options.memory ${options.memory}"
++ puts $datei "options.quad ${options.quad}"
++ puts $datei "options.inverttets ${options.inverttets}"
++ puts $datei "options.inverttrigs ${options.inverttrigs}"
++ puts $datei "options.autozrefine ${options.autozrefine}"
++ puts $datei "options.meshsize ${options.meshsize}"
++ puts $datei "options.minmeshsize ${options.minmeshsize}"
++ puts $datei "options.curvaturesafety ${options.curvaturesafety}"
++ puts $datei "options.segmentsperedge ${options.segmentsperedge}"
++ puts $datei "options.meshsizefilename ${options.meshsizefilename}"
++ puts $datei "options.badellimit ${options.badellimit}"
++ puts $datei "options.optsteps2d ${options.optsteps2d}"
++ puts $datei "options.optsteps3d ${options.optsteps3d}"
++ puts $datei "options.opterrpow ${options.opterrpow}"
++ puts $datei "options.grading ${options.grading}"
++ puts $datei "options.printmsg ${options.printmsg}"
++ puts $datei "geooptions.drawcsg ${geooptions.drawcsg}"
++ puts $datei "geooptions.detail ${geooptions.detail}"
++ puts $datei "geooptions.accuracy ${geooptions.accuracy}"
++ puts $datei "geooptions.facets ${geooptions.facets}"
++ puts $datei "geooptions.minx ${geooptions.minx}"
++ puts $datei "geooptions.miny ${geooptions.miny}"
++ puts $datei "geooptions.minz ${geooptions.minz}"
++ puts $datei "geooptions.maxx ${geooptions.maxx}"
++ puts $datei "geooptions.maxy ${geooptions.maxy}"
++ puts $datei "geooptions.maxz ${geooptions.maxz}"
++ puts $datei "viewoptions.specpointvlen ${viewoptions.specpointvlen}"
++ puts $datei "viewoptions.light.amb ${viewoptions.light.amb}"
++ puts $datei "viewoptions.light.diff ${viewoptions.light.diff}"
++ puts $datei "viewoptions.light.spec ${viewoptions.light.spec}"
++ puts $datei "viewoptions.light.locviewer ${viewoptions.light.locviewer}"
++ puts $datei "viewoptions.mat.shininess ${viewoptions.mat.shininess}"
++ puts $datei "viewoptions.mat.transp ${viewoptions.mat.transp}"
++ puts $datei "viewoptions.colormeshsize ${viewoptions.colormeshsize}"
++ puts $datei "viewoptions.whitebackground ${viewoptions.whitebackground}"
++ puts $datei "viewoptions.drawcolorbar ${viewoptions.drawcolorbar}"
++ puts $datei "viewoptions.drawcoordinatecross ${viewoptions.drawcoordinatecross}"
++ puts $datei "viewoptions.drawnetgenlogo ${viewoptions.drawnetgenlogo}"
++ puts $datei "viewoptions.stereo ${viewoptions.stereo}"
++ puts $datei "viewoptions.drawfilledtrigs ${viewoptions.drawfilledtrigs}"
++ puts $datei "viewoptions.drawedges ${viewoptions.drawedges}"
++ puts $datei "viewoptions.drawbadels ${viewoptions.drawbadels}"
++ puts $datei "viewoptions.centerpoint ${viewoptions.centerpoint}"
++ puts $datei "viewoptions.drawelement ${viewoptions.drawelement}"
++ puts $datei "viewoptions.drawoutline ${viewoptions.drawoutline}"
++ puts $datei "viewoptions.drawtets ${viewoptions.drawtets}"
++ puts $datei "viewoptions.drawprisms ${viewoptions.drawprisms}"
++ puts $datei "viewoptions.drawpyramids ${viewoptions.drawpyramids}"
++ puts $datei "viewoptions.drawhexes ${viewoptions.drawhexes}"
++ puts $datei "viewoptions.drawidentified ${viewoptions.drawidentified}"
++ puts $datei "viewoptions.drawpointnumbers ${viewoptions.drawpointnumbers}"
++
++ puts $datei "viewoptions.drawededges ${viewoptions.drawededges}"
++ puts $datei "viewoptions.drawedpoints ${viewoptions.drawedpoints}"
++ puts $datei "viewoptions.drawedpointnrs ${viewoptions.drawedpointnrs}"
++ puts $datei "viewoptions.drawedtangents ${viewoptions.drawedtangents}"
++ puts $datei "viewoptions.shrink ${viewoptions.shrink}"
++
++ puts $datei "stloptions.showtrias ${stloptions.showtrias}"
++ puts $datei "stloptions.showfilledtrias ${stloptions.showfilledtrias}"
++ puts $datei "stloptions.showedges ${stloptions.showedges}"
++ puts $datei "stloptions.showmarktrias ${stloptions.showmarktrias}"
++ puts $datei "stloptions.showactivechart ${stloptions.showactivechart}"
++ puts $datei "stloptions.yangle ${stloptions.yangle}"
++ puts $datei "stloptions.contyangle ${stloptions.contyangle}"
++ puts $datei "stloptions.edgecornerangle ${stloptions.edgecornerangle}"
++ puts $datei "stloptions.chartangle ${stloptions.chartangle}"
++ puts $datei "stloptions.outerchartangle ${stloptions.outerchartangle}"
++ puts $datei "stloptions.usesearchtree ${stloptions.usesearchtree}"
++ puts $datei "stloptions.chartnumber ${stloptions.chartnumber}"
++ puts $datei "stloptions.charttrignumber ${stloptions.charttrignumber}"
++ puts $datei "stloptions.chartnumberoffset ${stloptions.chartnumberoffset}"
++ puts $datei "stloptions.atlasminh ${stloptions.atlasminh}"
++ puts $datei "stloptions.resthsurfcurvfac ${stloptions.resthsurfcurvfac}"
++ puts $datei "stloptions.resthsurfcurvenable ${stloptions.resthsurfcurvenable}"
++ puts $datei "stloptions.resthatlasfac ${stloptions.resthatlasfac}"
++ puts $datei "stloptions.resthatlasenable ${stloptions.resthatlasenable}"
++ puts $datei "stloptions.resthchartdistfac ${stloptions.resthchartdistfac}"
++ puts $datei "stloptions.resthchartdistenable ${stloptions.resthchartdistenable}"
++ puts $datei "stloptions.resthlinelengthfac ${stloptions.resthlinelengthfac}"
++ puts $datei "stloptions.resthlinelengthenable ${stloptions.resthlinelengthenable}"
++ puts $datei "stloptions.resthminedgelen ${stloptions.resthminedgelen}"
++ puts $datei "stloptions.resthminedgelenenable ${stloptions.resthminedgelenenable}"
++ puts $datei "stloptions.resthcloseedgefac ${stloptions.resthcloseedgefac}"
++ puts $datei "stloptions.resthcloseedgeenable ${stloptions.resthcloseedgeenable}"
++ puts $datei "stloptions.resthedgeanglefac ${stloptions.resthedgeanglefac}"
++ puts $datei "stloptions.resthedgeangleenable ${stloptions.resthedgeangleenable}"
++ puts $datei "stloptions.resthsurfmeshcurvfac ${stloptions.resthsurfmeshcurvfac}"
++ puts $datei "stloptions.resthsurfmeshcurvenable ${stloptions.resthsurfmeshcurvenable}"
++ puts $datei "stloptions.recalchopt ${stloptions.recalchopt}"
++
++ puts $datei "visoptions.subdivisions ${visoptions.subdivisions}"
++ puts $datei "visoptions.autoredraw ${visoptions.autoredraw}"
++ puts $datei "visoptions.autoredrawtime ${visoptions.autoredrawtime}"
++
++
++ # trafo options
++ # if exist trafooptions then ...
++ if { [info exists trafooptions.solver] == 1 } {
++ puts $datei "trafooptions.solver ${trafooptions.solver}"
++ puts $datei "trafooptions.levels ${trafooptions.levels}"
++ puts $datei "trafooptions.linits ${trafooptions.linits}"
++ puts $datei "trafooptions.nonlinits ${trafooptions.nonlinits}"
++ puts $datei "trafooptions.stabcurrent ${trafooptions.stabcurrent}"
++ puts $datei "trafooptions.checkcond ${trafooptions.checkcond}"
++ puts $datei "trafooptions.maxdirect ${trafooptions.maxdirect}"
++ puts $datei "trafooptions.secondorder ${trafooptions.secondorder}"
++ puts $datei "trafooptions.homogenizedcore ${trafooptions.homogenizedcore}"
++ puts $datei "trafooptions.ordercore ${trafooptions.ordercore}"
++ puts $datei "trafooptions.simplecurrents ${trafooptions.simplecurrents}"
++ puts $datei "trafooptions.assemblecomplexmatrix ${trafooptions.assemblecomplexmatrix}"
++
++ puts $datei "trafooptions.meshcasing ${trafooptions.meshcasing}"
++ puts $datei "trafooptions.meshcore ${trafooptions.meshcore}"
++ puts $datei "trafooptions.meshclumps ${trafooptions.meshclumps}"
++ puts $datei "trafooptions.meshshields ${trafooptions.meshshields}"
++ puts $datei "trafooptions.meshcoils ${trafooptions.meshcoils}"
++ puts $datei "trafooptions.bcmdirectory ${trafooptions.bcmdirectory}"
++ puts $datei "trafooptions.lossdensityfile ${trafooptions.lossdensityfile}"
++ }
++
++ if { [info exists smalltrafomodell.tankheight] == 1 } {
++ puts $datei "smalltrafomodell.tankheight ${smalltrafomodell.tankheight}"
++ puts $datei "smalltrafomodell.tankwidth ${smalltrafomodell.tankwidth}"
++ puts $datei "smalltrafomodell.tanklength ${smalltrafomodell.tanklength}"
++ puts $datei "smalltrafomodell.corewidth ${smalltrafomodell.corewidth}"
++ puts $datei "smalltrafomodell.windowheight ${smalltrafomodell.windowheight}"
++ puts $datei "smalltrafomodell.limbdistance ${smalltrafomodell.limbdistance}"
++ puts $datei "smalltrafomodell.xposcore ${smalltrafomodell.xposcore}"
++ puts $datei "smalltrafomodell.yposcore ${smalltrafomodell.yposcore}"
++ puts $datei "smalltrafomodell.zposcore ${smalltrafomodell.zposcore}"
++ puts $datei "smalltrafomodell.leakagefluxguidethickness ${smalltrafomodell.leakagefluxguidethickness}"
++ puts $datei "smalltrafomodell.leakagefluxguidewidth ${smalltrafomodell.leakagefluxguidewidth}"
++ puts $datei "smalltrafomodell.leakagefluxguidezposition ${smalltrafomodell.leakagefluxguidezposition}"
++ puts $datei "smalltrafomodell.limbcoil.1 ${smalltrafomodell.limbcoil.1}"
++ puts $datei "smalltrafomodell.ricoil.1 ${smalltrafomodell.ricoil.1}"
++ puts $datei "smalltrafomodell.rocoil.1 ${smalltrafomodell.rocoil.1}"
++ puts $datei "smalltrafomodell.zposcoil.1 ${smalltrafomodell.zposcoil.1}"
++ puts $datei "smalltrafomodell.heightcoil.1 ${smalltrafomodell.heightcoil.1}"
++ puts $datei "smalltrafomodell.currentcoil.1 ${smalltrafomodell.currentcoil.1}"
++ puts $datei "smalltrafomodell.nturnscoil.1 ${smalltrafomodell.nturnscoil.1}"
++ puts $datei "smalltrafomodell.limbcoil.2 ${smalltrafomodell.limbcoil.2}"
++ puts $datei "smalltrafomodell.ricoil.2 ${smalltrafomodell.ricoil.2}"
++ puts $datei "smalltrafomodell.rocoil.2 ${smalltrafomodell.rocoil.2}"
++ puts $datei "smalltrafomodell.zposcoil.2 ${smalltrafomodell.zposcoil.2}"
++ puts $datei "smalltrafomodell.heightcoil.2 ${smalltrafomodell.heightcoil.2}"
++ puts $datei "smalltrafomodell.currentcoil.2 ${smalltrafomodell.currentcoil.2}"
++ puts $datei "smalltrafomodell.nturnscoil.2 ${smalltrafomodell.nturnscoil.2}"
++ puts $datei "smalltrafomodell.limbcoil.3 ${smalltrafomodell.limbcoil.3}"
++ puts $datei "smalltrafomodell.ricoil.3 ${smalltrafomodell.ricoil.3}"
++ puts $datei "smalltrafomodell.rocoil.3 ${smalltrafomodell.rocoil.3}"
++ puts $datei "smalltrafomodell.zposcoil.3 ${smalltrafomodell.zposcoil.3}"
++ puts $datei "smalltrafomodell.heightcoil.3 ${smalltrafomodell.heightcoil.3}"
++ puts $datei "smalltrafomodell.currentcoil.3 ${smalltrafomodell.currentcoil.3}"
++ puts $datei "smalltrafomodell.nturnscoil.3 ${smalltrafomodell.nturnscoil.3}"
++ puts $datei "smalltrafomodell.limbcoil.4 ${smalltrafomodell.limbcoil.4}"
++ puts $datei "smalltrafomodell.ricoil.4 ${smalltrafomodell.ricoil.4}"
++ puts $datei "smalltrafomodell.rocoil.4 ${smalltrafomodell.rocoil.4}"
++ puts $datei "smalltrafomodell.zposcoil.4 ${smalltrafomodell.zposcoil.4}"
++ puts $datei "smalltrafomodell.heightcoil.4 ${smalltrafomodell.heightcoil.4}"
++ puts $datei "smalltrafomodell.currentcoil.4 ${smalltrafomodell.currentcoil.4}"
++ puts $datei "smalltrafomodell.nturnscoil.4 ${smalltrafomodell.nturnscoil.4}"
++ puts $datei "smalltrafomodell.limbcoil.5 ${smalltrafomodell.limbcoil.5}"
++ puts $datei "smalltrafomodell.ricoil.5 ${smalltrafomodell.ricoil.5}"
++ puts $datei "smalltrafomodell.rocoil.5 ${smalltrafomodell.rocoil.5}"
++ puts $datei "smalltrafomodell.zposcoil.5 ${smalltrafomodell.zposcoil.5}"
++ puts $datei "smalltrafomodell.heightcoil.5 ${smalltrafomodell.heightcoil.5}"
++ puts $datei "smalltrafomodell.currentcoil.5 ${smalltrafomodell.currentcoil.5}"
++ puts $datei "smalltrafomodell.nturnscoil.5 ${smalltrafomodell.nturnscoil.5}"
++ puts $datei "smalltrafomodell.limbcoil.6 ${smalltrafomodell.limbcoil.6}"
++ puts $datei "smalltrafomodell.ricoil.6 ${smalltrafomodell.ricoil.6}"
++ puts $datei "smalltrafomodell.rocoil.6 ${smalltrafomodell.rocoil.6}"
++ puts $datei "smalltrafomodell.zposcoil.6 ${smalltrafomodell.zposcoil.6}"
++ puts $datei "smalltrafomodell.heightcoil.6 ${smalltrafomodell.heightcoil.6}"
++ puts $datei "smalltrafomodell.currentcoil.6 ${smalltrafomodell.currentcoil.6}"
++ puts $datei "smalltrafomodell.nturnscoil.6 ${smalltrafomodell.nturnscoil.6}"
++ puts $datei "smalltrafomodell.limbtest.1 ${smalltrafomodell.limbtest.1}"
++ puts $datei "smalltrafomodell.heighttest.1 ${smalltrafomodell.heighttest.1}"
++ puts $datei "smalltrafomodell.widthtest.1 ${smalltrafomodell.widthtest.1}"
++ puts $datei "smalltrafomodell.rtest.1 ${smalltrafomodell.rtest.1}"
++ puts $datei "smalltrafomodell.zpostest.1 ${smalltrafomodell.zpostest.1}"
++ puts $datei "smalltrafomodell.edgeradiustest.1 ${smalltrafomodell.edgeradiustest.1}"
++ puts $datei "smalltrafomodell.finetest.1 ${smalltrafomodell.finetest.1}"
++ puts $datei "smalltrafomodell.conductivetest.1 ${smalltrafomodell.conductivetest.1}"
++ puts $datei "smalltrafomodell.limbtest.2 ${smalltrafomodell.limbtest.2}"
++ puts $datei "smalltrafomodell.heighttest.2 ${smalltrafomodell.heighttest.2}"
++ puts $datei "smalltrafomodell.widthtest.2 ${smalltrafomodell.widthtest.2}"
++ puts $datei "smalltrafomodell.rtest.2 ${smalltrafomodell.rtest.2}"
++ puts $datei "smalltrafomodell.zpostest.2 ${smalltrafomodell.zpostest.2}"
++ puts $datei "smalltrafomodell.edgeradiustest.2 ${smalltrafomodell.edgeradiustest.2}"
++ puts $datei "smalltrafomodell.finetest.2 ${smalltrafomodell.finetest.2}"
++ puts $datei "smalltrafomodell.conductivetest.2 ${smalltrafomodell.conductivetest.2}"
++ puts $datei "smalltrafomodell.limbtest.3 ${smalltrafomodell.limbtest.3}"
++ puts $datei "smalltrafomodell.heighttest.3 ${smalltrafomodell.heighttest.3}"
++ puts $datei "smalltrafomodell.widthtest.3 ${smalltrafomodell.widthtest.3}"
++ puts $datei "smalltrafomodell.rtest.3 ${smalltrafomodell.rtest.3}"
++ puts $datei "smalltrafomodell.zpostest.3 ${smalltrafomodell.zpostest.3}"
++ puts $datei "smalltrafomodell.edgeradiustest.3 ${smalltrafomodell.edgeradiustest.3}"
++ puts $datei "smalltrafomodell.finetest.3 ${smalltrafomodell.finetest.3}"
++ puts $datei "smalltrafomodell.conductivetest.3 ${smalltrafomodell.conductivetest.3}"
++ puts $datei "smalltrafomodell.limbtest.4 ${smalltrafomodell.limbtest.4}"
++ puts $datei "smalltrafomodell.heighttest.4 ${smalltrafomodell.heighttest.4}"
++ puts $datei "smalltrafomodell.widthtest.4 ${smalltrafomodell.widthtest.4}"
++ puts $datei "smalltrafomodell.rtest.4 ${smalltrafomodell.rtest.4}"
++ puts $datei "smalltrafomodell.zpostest.4 ${smalltrafomodell.zpostest.4}"
++ puts $datei "smalltrafomodell.edgeradiustest.4 ${smalltrafomodell.edgeradiustest.4}"
++ puts $datei "smalltrafomodell.finetest.4 ${smalltrafomodell.finetest.4}"
++ puts $datei "smalltrafomodell.conductivetest.4 ${smalltrafomodell.conductivetest.4}"
++ puts $datei "smalltrafomodell.nperitest ${smalltrafomodell.nperitest}"
++ puts $datei "smalltrafomodell.filename ${smalltrafomodell.filename}"
++ puts $datei "smalltrafomodell.murlfguide ${smalltrafomodell.murlfguide}"
++ puts $datei "smalltrafomodell.murtestwire ${smalltrafomodell.murtestwire}"
++ puts $datei "smalltrafomodell.murcore ${smalltrafomodell.murcore}"
++ puts $datei "smalltrafomodell.kappalfguide ${smalltrafomodell.kappalfguide}"
++ puts $datei "smalltrafomodell.kappatestwire ${smalltrafomodell.kappatestwire}"
++ puts $datei "smalltrafomodell.kappacore ${smalltrafomodell.kappacore}"
++ }
++
++
++ close $datei
++ }
++ }
++}
++
++
++
++
++# the ini file is saved on demand :
++proc saveinifile { } {
++ global inifilename
++ if {[catch { set datei [open $inifilename w] } result ]} {
++ puts "cannot write file $inifilename"
++ } {
++ for { set i [.ngmenu.file.recent index last] } { $i >= 1 } { incr i -1 } {
++ puts $datei "recentfile \"[.ngmenu.file.recent entrycget $i -label]\""
++ }
++ close $datei
++ }
++}
++
++
++proc savemeshinifile { } {
++ global meshinifilename
++ if {[catch { set datei [open $meshinifilename w] } result ]} {
++ puts "cannot write file $meshinifilename"
++ } {
++ for { set i [.ngmenu.file.recentmesh index last] } { $i >= 1 } { incr i -1 } {
++ puts $datei "recentfile \"[.ngmenu.file.recentmesh entrycget $i -label]\""
++ }
++ close $datei
++ }
++}
++
++
++
++proc loadinifile { } {
++ global inifilename
++ if { [file exists $inifilename] == 1 } {
++ set datei [open $inifilename r]
++ while { [gets $datei line] >= 0 } {
++ if {[lindex $line 0] == "recentfile"} {
++ set filename [lindex $line 1]
++ if { [file exists $filename] == 1 } {
++ AddRecentFile $filename
++ }
++ }
++ }
++ close $datei
++ }
++}
++
++
++proc loadmeshinifile { } {
++ global meshinifilename
++ if { [file exists $meshinifilename] == 1 } {
++ set datei [open $meshinifilename r]
++ while { [gets $datei line] >= 0 } {
++ if {[lindex $line 0] == "recentfile"} {
++ set filename [lindex $line 1]
++ if { [file exists $filename] == 1 } {
++ AddRecentMeshFile $filename
++ }
++ }
++ }
++ close $datei
++ }
++ }
++
++
++
++
++
++set cmdindex {}
++set hlpindex {}
++set secindex {}
+diff -Naur netgen-5.3.1_SRC_orig/nglib/Makefile.am netgen-5.3.1_SRC_modif/nglib/Makefile.am
+--- netgen-5.3.1_SRC_orig/nglib/Makefile.am 2014-08-29 13:54:00.000000000 +0400
++++ netgen-5.3.1_SRC_modif/nglib/Makefile.am 2019-11-14 16:56:25.398368562 +0300
+@@ -14,6 +14,9 @@
+ $(top_builddir)/libsrc/stlgeom/libstl.la \
+ $(top_builddir)/libsrc/occ/libocc.la \
+ $(top_builddir)/libsrc/meshing/libmesh.la \
++ $(top_builddir)/libsrc/general/libgen.la \
++ $(top_builddir)/libsrc/gprim/libgprim.la \
++ $(top_builddir)/libsrc/linalg/libla.la
+ $(OCCLIBS) $(MPI_LIBS)
+
+ libnglib_la_LDFLAGS = -avoid-version
+diff -Naur netgen-5.3.1_SRC_orig/nglib/nglib.cpp netgen-5.3.1_SRC_modif/nglib/nglib.cpp
+--- netgen-5.3.1_SRC_orig/nglib/nglib.cpp 2014-08-29 13:54:00.000000000 +0400
++++ netgen-5.3.1_SRC_modif/nglib/nglib.cpp 2019-11-14 16:56:25.386368898 +0300
+@@ -1,1242 +1,1242 @@
+-/**************************************************************************/\r
+-/* File: nglib.cpp */\r
+-/* Author: Joachim Schoeberl */\r
+-/* Date: 7. May. 2000 */\r
+-/**************************************************************************/\r
+-\r
+-/*\r
+- \r
+- Interface to the netgen meshing kernel\r
+- \r
+-*/\r
+-#include <mystdlib.h>\r
+-#include <myadt.hpp>\r
+-\r
+-#include <linalg.hpp>\r
+-#include <csg.hpp>\r
+-#include <stlgeom.hpp>\r
+-#include <geometry2d.hpp>\r
+-#include <meshing.hpp>\r
+-#include <../visualization/soldata.hpp>\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-#include <occgeom.hpp>\r
+-#endif\r
+-\r
+-#include <nginterface.h>\r
+-\r
+-\r
+-namespace netgen {\r
+- extern void MeshFromSpline2D (SplineGeometry2d & geometry,\r
+- Mesh *& mesh, \r
+- MeshingParameters & mp);\r
+-}\r
+-\r
+-\r
+-\r
+-#ifdef PARALLEL\r
+-#include <mpi.h>\r
+-\r
+-namespace netgen\r
+-{\r
+- // int id = 0, ntasks = 1;\r
+- MPI_Comm mesh_comm;\r
+-}\r
+-#endif\r
+-\r
+-\r
+-namespace netgen\r
+-{\r
+- int id = 0, ntasks = 1;\r
+-}\r
+-\r
+-\r
+-\r
+-/*\r
+-// should not be needed (occ currently requires it)\r
+-namespace netgen {\r
+-#include "../libsrc/visualization/vispar.hpp"\r
+- VisualizationParameters vispar;\r
+- VisualizationParameters :: VisualizationParameters() { ; }\r
+-}\r
+-*/\r
+-\r
+-\r
+-namespace nglib {\r
+-#include "nglib.h"\r
+-}\r
+-\r
+-using namespace netgen;\r
+-\r
+-// constants and types:\r
+-\r
+-namespace nglib\r
+-{\r
+- // initialize, deconstruct Netgen library:\r
+- DLL_HEADER void Ng_Init ()\r
+- {\r
+- mycout = &cout;\r
+- myerr = &cerr;\r
+- // netgen::testout->SetOutStream (new ofstream ("test.out"));\r
+- testout = new ofstream ("test.out");\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Clean-up functions before ending usage of nglib\r
+- DLL_HEADER void Ng_Exit ()\r
+- {\r
+- ;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Create a new netgen mesh object\r
+- DLL_HEADER Ng_Mesh * Ng_NewMesh ()\r
+- {\r
+- Mesh * mesh = new Mesh; \r
+- mesh->AddFaceDescriptor (FaceDescriptor (1, 1, 0, 1));\r
+- return (Ng_Mesh*)(void*)mesh;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Delete an existing netgen mesh object\r
+- DLL_HEADER void Ng_DeleteMesh (Ng_Mesh * mesh)\r
+- {\r
+- if(mesh != NULL)\r
+- {\r
+- // Delete the Mesh structures\r
+- ((Mesh*)mesh)->DeleteMesh();\r
+-\r
+- // Now delete the Mesh class itself\r
+- delete (Mesh*)mesh;\r
+-\r
+- // Set the Ng_Mesh pointer to NULL\r
+- mesh = NULL;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Save a netgen mesh in the native VOL format \r
+- DLL_HEADER void Ng_SaveMesh(Ng_Mesh * mesh, const char* filename)\r
+- {\r
+- ((Mesh*)mesh)->Save(filename);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Load a netgen native VOL mesh from a given file\r
+- DLL_HEADER Ng_Mesh * Ng_LoadMesh(const char* filename)\r
+- {\r
+- Mesh * mesh = new Mesh;\r
+- mesh->Load(filename);\r
+- return ( (Ng_Mesh*)mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Merge another mesh file into the currently loaded one\r
+- DLL_HEADER Ng_Result Ng_MergeMesh( Ng_Mesh* mesh, const char* filename)\r
+- {\r
+- Ng_Result status = NG_OK;\r
+-\r
+- ifstream infile(filename);\r
+- Mesh * m = (Mesh*)mesh;\r
+-\r
+- if(!infile.good())\r
+- {\r
+- status = NG_FILE_NOT_FOUND;\r
+- }\r
+-\r
+- if(!m)\r
+- {\r
+- status = NG_ERROR;\r
+- }\r
+-\r
+- if(status == NG_OK)\r
+- {\r
+- const int num_pts = m->GetNP();\r
+- const int face_offset = m->GetNFD();\r
+-\r
+- m->Merge(infile, face_offset);\r
+-\r
+- if(m->GetNP() > num_pts)\r
+- {\r
+- status = NG_OK;\r
+- }\r
+- else\r
+- {\r
+- status = NG_ERROR;\r
+- }\r
+- }\r
+-\r
+- return status;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Merge another mesh file into the currently loaded one\r
+- DLL_HEADER Ng_Result Ng_MergeMesh( Ng_Mesh* mesh1, Ng_Mesh* mesh2)\r
+- {\r
+- return NG_ERROR;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Manually add a point to an existing mesh object\r
+- DLL_HEADER void Ng_AddPoint (Ng_Mesh * mesh, double * x)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- m->AddPoint (Point3d (x[0], x[1], x[2]));\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Manually add a surface element of a given type to an existing mesh object\r
+- DLL_HEADER void Ng_AddSurfaceElement (Ng_Mesh * mesh, Ng_Surface_Element_Type et,\r
+- int * pi)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- Element2d el (3);\r
+- el.SetIndex (1);\r
+- el.PNum(1) = pi[0];\r
+- el.PNum(2) = pi[1];\r
+- el.PNum(3) = pi[2];\r
+- m->AddSurfaceElement (el);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Manually add a volume element of a given type to an existing mesh object\r
+- DLL_HEADER void Ng_AddVolumeElement (Ng_Mesh * mesh, Ng_Volume_Element_Type et,\r
+- int * pi)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- Element el (4);\r
+- el.SetIndex (1);\r
+- el.PNum(1) = pi[0];\r
+- el.PNum(2) = pi[1];\r
+- el.PNum(3) = pi[2];\r
+- el.PNum(4) = pi[3];\r
+- m->AddVolumeElement (el);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Obtain the number of points in the mesh\r
+- DLL_HEADER int Ng_GetNP (Ng_Mesh * mesh)\r
+- {\r
+- return ((Mesh*)mesh) -> GetNP();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Obtain the number of surface elements in the mesh\r
+- DLL_HEADER int Ng_GetNSE (Ng_Mesh * mesh)\r
+- {\r
+- return ((Mesh*)mesh) -> GetNSE();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Obtain the number of volume elements in the mesh\r
+- DLL_HEADER int Ng_GetNE (Ng_Mesh * mesh)\r
+- {\r
+- return ((Mesh*)mesh) -> GetNE();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Return point coordinates of a given point index in the mesh\r
+- DLL_HEADER void Ng_GetPoint (Ng_Mesh * mesh, int num, double * x)\r
+- {\r
+- const Point3d & p = ((Mesh*)mesh)->Point(num);\r
+- x[0] = p.X();\r
+- x[1] = p.Y();\r
+- x[2] = p.Z();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Return the surface element at a given index "pi"\r
+- DLL_HEADER Ng_Surface_Element_Type \r
+- Ng_GetSurfaceElement (Ng_Mesh * mesh, int num, int * pi)\r
+- {\r
+- const Element2d & el = ((Mesh*)mesh)->SurfaceElement(num);\r
+- for (int i = 1; i <= el.GetNP(); i++)\r
+- pi[i-1] = el.PNum(i);\r
+- Ng_Surface_Element_Type et;\r
+- switch (el.GetNP())\r
+- {\r
+- case 3: et = NG_TRIG; break;\r
+- case 4: et = NG_QUAD; break;\r
+- case 6: \r
+- switch (el.GetNV())\r
+- {\r
+- case 3: et = NG_TRIG6; break;\r
+- case 4: et = NG_QUAD6; break;\r
+- default:\r
+- et = NG_TRIG6; break;\r
+- }\r
+- break;\r
+- case 8: et = NG_QUAD8; break;\r
+- default:\r
+- et = NG_TRIG; break; // for the compiler\r
+- }\r
+- return et;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Return the volume element at a given index "pi"\r
+- DLL_HEADER Ng_Volume_Element_Type\r
+- Ng_GetVolumeElement (Ng_Mesh * mesh, int num, int * pi)\r
+- {\r
+- const Element & el = ((Mesh*)mesh)->VolumeElement(num);\r
+- for (int i = 1; i <= el.GetNP(); i++)\r
+- pi[i-1] = el.PNum(i);\r
+- Ng_Volume_Element_Type et;\r
+- switch (el.GetNP())\r
+- {\r
+- case 4: et = NG_TET; break;\r
+- case 5: et = NG_PYRAMID; break;\r
+- case 6: et = NG_PRISM; break;\r
+- case 10: et = NG_TET10; break;\r
+- default:\r
+- et = NG_TET; break; // for the compiler\r
+- }\r
+- return et;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Set a global limit on the maximum mesh size allowed\r
+- DLL_HEADER void Ng_RestrictMeshSizeGlobal (Ng_Mesh * mesh, double h)\r
+- {\r
+- ((Mesh*)mesh) -> SetGlobalH (h);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Set a local limit on the maximum mesh size allowed around the given point\r
+- DLL_HEADER void Ng_RestrictMeshSizePoint (Ng_Mesh * mesh, double * p, double h)\r
+- {\r
+- ((Mesh*)mesh) -> RestrictLocalH (Point3d (p[0], p[1], p[2]), h);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Set a local limit on the maximum mesh size allowed within a given box region\r
+- DLL_HEADER void Ng_RestrictMeshSizeBox (Ng_Mesh * mesh, double * pmin, double * pmax, double h)\r
+- {\r
+- for (double x = pmin[0]; x < pmax[0]; x += h)\r
+- for (double y = pmin[1]; y < pmax[1]; y += h)\r
+- for (double z = pmin[2]; z < pmax[2]; z += h)\r
+- ((Mesh*)mesh) -> RestrictLocalH (Point3d (x, y, z), h);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Generates volume mesh from an existing surface mesh\r
+- DLL_HEADER Ng_Result Ng_GenerateVolumeMesh (Ng_Mesh * mesh, Ng_Meshing_Parameters * mp)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+-\r
+- // Philippose - 30/08/2009\r
+- // Do not locally re-define "mparam" here... "mparam" is a global \r
+- // object \r
+- //MeshingParameters mparam;\r
+- mp->Transfer_Parameters();\r
+-\r
+- m->CalcLocalH(mparam.grading);\r
+-\r
+- MeshVolume (mparam, *m);\r
+- RemoveIllegalElements (*m);\r
+- OptimizeVolume (mparam, *m);\r
+-\r
+- return NG_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- /* ------------------ 2D Meshing Functions ------------------------- */\r
+- DLL_HEADER void Ng_AddPoint_2D (Ng_Mesh * mesh, double * x)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+-\r
+- m->AddPoint (Point3d (x[0], x[1], 0));\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_AddBoundarySeg_2D (Ng_Mesh * mesh, int pi1, int pi2)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+-\r
+- Segment seg;\r
+- seg[0] = pi1;\r
+- seg[1] = pi2;\r
+- m->AddSegment (seg);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER int Ng_GetNP_2D (Ng_Mesh * mesh)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- return m->GetNP();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER int Ng_GetNE_2D (Ng_Mesh * mesh)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- return m->GetNSE();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER int Ng_GetNSeg_2D (Ng_Mesh * mesh)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+- return m->GetNSeg();\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_GetPoint_2D (Ng_Mesh * mesh, int num, double * x)\r
+- {\r
+- Mesh * m = (Mesh*)mesh;\r
+-\r
+- Point<3> & p = m->Point(num);\r
+- x[0] = p(0);\r
+- x[1] = p(1);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER Ng_Surface_Element_Type\r
+- Ng_GetElement_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum)\r
+- {\r
+- const Element2d & el = ((Mesh*)mesh)->SurfaceElement(num);\r
+- for (int i = 1; i <= el.GetNP(); i++)\r
+- pi[i-1] = el.PNum(i);\r
+-\r
+- Ng_Surface_Element_Type et;\r
+- switch (el.GetNP())\r
+- {\r
+- case 3: et = NG_TRIG; break;\r
+- case 4: et = NG_QUAD; break;\r
+- case 6: \r
+- switch (el.GetNV())\r
+- {\r
+- case 3: et = NG_TRIG6; break;\r
+- case 4: et = NG_QUAD6; break;\r
+- default:\r
+- et = NG_TRIG6; break;\r
+- }\r
+- break;\r
+- case 8: et = NG_QUAD8; break;\r
+- default:\r
+- et = NG_TRIG; break; // for the compiler\r
+- }\r
+-\r
+- if (matnum)\r
+- *matnum = el.GetIndex();\r
+-\r
+- return et;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_GetSegment_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum)\r
+- {\r
+- const Segment & seg = ((Mesh*)mesh)->LineSegment(num);\r
+- pi[0] = seg[0];\r
+- pi[1] = seg[1];\r
+-\r
+- if (matnum)\r
+- *matnum = seg.edgenr;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER Ng_Geometry_2D * Ng_LoadGeometry_2D (const char * filename)\r
+- {\r
+- SplineGeometry2d * geom = new SplineGeometry2d();\r
+- geom -> Load (filename);\r
+- return (Ng_Geometry_2D *)geom;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER Ng_Result Ng_GenerateMesh_2D (Ng_Geometry_2D * geom,\r
+- Ng_Mesh ** mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- // use global variable mparam\r
+- // MeshingParameters mparam; \r
+- mp->Transfer_Parameters();\r
+-\r
+- Mesh * m;\r
+- MeshFromSpline2D (*(SplineGeometry2d*)geom, m, mparam);\r
+-\r
+- cout << m->GetNSE() << " elements, " << m->GetNP() << " points" << endl;\r
+-\r
+- *mesh = (Ng_Mesh*)m;\r
+- return NG_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh,\r
+- int levels)\r
+- {\r
+- Refinement2d ref(*(SplineGeometry2d*)geom);\r
+- HPRefinement (*(Mesh*)mesh, &ref, levels);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh,\r
+- int levels, double parameter)\r
+- {\r
+- Refinement2d ref(*(SplineGeometry2d*)geom);\r
+- HPRefinement (*(Mesh*)mesh, &ref, levels, parameter);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- Array<STLReadTriangle> readtrias; //only before initstlgeometry\r
+- Array<Point<3> > readedges; //only before init stlgeometry\r
+-\r
+- // loads geometry from STL file\r
+- DLL_HEADER Ng_STL_Geometry * Ng_STL_LoadGeometry (const char * filename, int binary)\r
+- {\r
+- int i;\r
+- STLGeometry geom;\r
+- STLGeometry* geo;\r
+- ifstream ist(filename);\r
+-\r
+- if (binary)\r
+- {\r
+- geo = geom.LoadBinary(ist);\r
+- }\r
+- else\r
+- {\r
+- geo = geom.Load(ist);\r
+- }\r
+-\r
+- readtrias.SetSize(0);\r
+- readedges.SetSize(0);\r
+-\r
+- Point3d p;\r
+- Vec3d normal;\r
+- double p1[3];\r
+- double p2[3];\r
+- double p3[3];\r
+- double n[3];\r
+-\r
+- Ng_STL_Geometry * geo2 = Ng_STL_NewGeometry();\r
+-\r
+- for (i = 1; i <= geo->GetNT(); i++)\r
+- {\r
+- const STLTriangle& t = geo->GetTriangle(i);\r
+- p = geo->GetPoint(t.PNum(1));\r
+- p1[0] = p.X(); p1[1] = p.Y(); p1[2] = p.Z(); \r
+- p = geo->GetPoint(t.PNum(2));\r
+- p2[0] = p.X(); p2[1] = p.Y(); p2[2] = p.Z(); \r
+- p = geo->GetPoint(t.PNum(3));\r
+- p3[0] = p.X(); p3[1] = p.Y(); p3[2] = p.Z();\r
+- normal = t.Normal();\r
+- n[0] = normal.X(); n[1] = normal.Y(); n[2] = normal.Z();\r
+-\r
+- Ng_STL_AddTriangle(geo2, p1, p2, p3, n);\r
+- }\r
+-\r
+- return geo2;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // generate new STL Geometry\r
+- DLL_HEADER Ng_STL_Geometry * Ng_STL_NewGeometry ()\r
+- {\r
+- return (Ng_STL_Geometry*)(void*)new STLGeometry;\r
+- } \r
+-\r
+-\r
+-\r
+-\r
+- // after adding triangles (and edges) initialize\r
+- DLL_HEADER Ng_Result Ng_STL_InitSTLGeometry (Ng_STL_Geometry * geom)\r
+- {\r
+- STLGeometry* geo = (STLGeometry*)geom;\r
+- geo->InitSTLGeometry(readtrias);\r
+- readtrias.SetSize(0);\r
+-\r
+- if (readedges.Size() != 0)\r
+- {\r
+- /*\r
+- for (int i = 1; i <= readedges.Size(); i+=2)\r
+- {\r
+- cout << "e(" << readedges.Get(i) << "," << readedges.Get(i+1) << ")" << endl;\r
+- }\r
+- */\r
+- geo->AddEdges(readedges);\r
+- }\r
+-\r
+- if (geo->GetStatus() == STLTopology::STL_GOOD || geo->GetStatus() == STLTopology::STL_WARNING) return NG_OK;\r
+- return NG_SURFACE_INPUT_ERROR;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // automatically generates edges:\r
+- DLL_HEADER Ng_Result Ng_STL_MakeEdges (Ng_STL_Geometry * geom,\r
+- Ng_Mesh* mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- STLGeometry* stlgeometry = (STLGeometry*)geom;\r
+- Mesh* me = (Mesh*)mesh;\r
+-\r
+- // Philippose - 27/07/2009\r
+- // Do not locally re-define "mparam" here... "mparam" is a global \r
+- // object \r
+- //MeshingParameters mparam;\r
+- mp->Transfer_Parameters();\r
+-\r
+- me -> SetGlobalH (mparam.maxh);\r
+- me -> SetLocalH (stlgeometry->GetBoundingBox().PMin() - Vec3d(10, 10, 10),\r
+- stlgeometry->GetBoundingBox().PMax() + Vec3d(10, 10, 10),\r
+- 0.3);\r
+-\r
+- me -> LoadLocalMeshSize (mp->meshsize_filename);\r
+- /*\r
+- if (mp->meshsize_filename)\r
+- {\r
+- ifstream infile (mp->meshsize_filename);\r
+- if (!infile.good()) return NG_FILE_NOT_FOUND;\r
+- me -> LoadLocalMeshSize (infile);\r
+- }\r
+- */\r
+-\r
+- STLMeshing (*stlgeometry, *me);\r
+-\r
+- stlgeometry->edgesfound = 1;\r
+- stlgeometry->surfacemeshed = 0;\r
+- stlgeometry->surfaceoptimized = 0;\r
+- stlgeometry->volumemeshed = 0;\r
+-\r
+- return NG_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // generates mesh, empty mesh be already created.\r
+- DLL_HEADER Ng_Result Ng_STL_GenerateSurfaceMesh (Ng_STL_Geometry * geom,\r
+- Ng_Mesh* mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- STLGeometry* stlgeometry = (STLGeometry*)geom;\r
+- Mesh* me = (Mesh*)mesh;\r
+-\r
+- // Philippose - 27/07/2009\r
+- // Do not locally re-define "mparam" here... "mparam" is a global \r
+- // object\r
+- //MeshingParameters mparam;\r
+- mp->Transfer_Parameters();\r
+-\r
+-\r
+- /*\r
+- me -> SetGlobalH (mparam.maxh);\r
+- me -> SetLocalH (stlgeometry->GetBoundingBox().PMin() - Vec3d(10, 10, 10),\r
+- stlgeometry->GetBoundingBox().PMax() + Vec3d(10, 10, 10),\r
+- 0.3);\r
+- */\r
+- /*\r
+- STLMeshing (*stlgeometry, *me);\r
+-\r
+- stlgeometry->edgesfound = 1;\r
+- stlgeometry->surfacemeshed = 0;\r
+- stlgeometry->surfaceoptimized = 0;\r
+- stlgeometry->volumemeshed = 0;\r
+- */ \r
+- int retval = STLSurfaceMeshing (*stlgeometry, *me);\r
+- if (retval == MESHING3_OK)\r
+- {\r
+- (*mycout) << "Success !!!!" << endl;\r
+- stlgeometry->surfacemeshed = 1;\r
+- stlgeometry->surfaceoptimized = 0;\r
+- stlgeometry->volumemeshed = 0;\r
+- } \r
+- else if (retval == MESHING3_OUTERSTEPSEXCEEDED)\r
+- {\r
+- (*mycout) << "ERROR: Give up because of too many trials. Meshing aborted!" << endl;\r
+- }\r
+- else if (retval == MESHING3_TERMINATE)\r
+- {\r
+- (*mycout) << "Meshing Stopped!" << endl;\r
+- }\r
+- else\r
+- {\r
+- (*mycout) << "ERROR: Surface meshing not successful. Meshing aborted!" << endl;\r
+- }\r
+-\r
+-\r
+- STLSurfaceOptimization (*stlgeometry, *me, mparam);\r
+-\r
+- return NG_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // fills STL Geometry\r
+- // positive orientation\r
+- // normal vector may be null-pointer\r
+- DLL_HEADER void Ng_STL_AddTriangle (Ng_STL_Geometry * geom, \r
+- double * p1, double * p2, double * p3, \r
+- double * nv)\r
+- {\r
+- Point<3> apts[3];\r
+- apts[0] = Point<3>(p1[0],p1[1],p1[2]);\r
+- apts[1] = Point<3>(p2[0],p2[1],p2[2]);\r
+- apts[2] = Point<3>(p3[0],p3[1],p3[2]);\r
+-\r
+- Vec<3> n;\r
+- if (!nv)\r
+- n = Cross (apts[0]-apts[1], apts[0]-apts[2]);\r
+- else\r
+- n = Vec<3>(nv[0],nv[1],nv[2]);\r
+-\r
+- readtrias.Append(STLReadTriangle(apts,n));\r
+- }\r
+-\r
+- // add (optional) edges:\r
+- DLL_HEADER void Ng_STL_AddEdge (Ng_STL_Geometry * geom, \r
+- double * p1, double * p2)\r
+- {\r
+- readedges.Append(Point3d(p1[0],p1[1],p1[2]));\r
+- readedges.Append(Point3d(p2[0],p2[1],p2[2]));\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-#ifdef OCCGEOMETRY\r
+- // --------------------- OCC Geometry / Meshing Utility Functions -------------------\r
+- // Create new OCC Geometry Object\r
+- DLL_HEADER Ng_OCC_Geometry * Ng_OCC_NewGeometry ()\r
+- {\r
+- return (Ng_OCC_Geometry*)(void*)new OCCGeometry;\r
+- } \r
+-\r
+-\r
+-\r
+-\r
+- // Delete the OCC Geometry Object\r
+- DLL_HEADER Ng_Result Ng_OCC_DeleteGeometry(Ng_OCC_Geometry * geom)\r
+- {\r
+- if (geom != NULL)\r
+- {\r
+- delete (OCCGeometry*)geom;\r
+- geom = NULL;\r
+- return NG_OK;\r
+- }\r
+- \r
+- return NG_ERROR;\r
+- }\r
+-\r
+-\r
+-\r
+- \r
+- // Loads geometry from STEP File\r
+- DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_STEP (const char * filename)\r
+- {\r
+- // Call the STEP File Load function. Note.. the geometry class \r
+- // is created and instantiated within the load function\r
+- OCCGeometry * occgeo = LoadOCC_STEP(filename);\r
+-\r
+- return ((Ng_OCC_Geometry *)occgeo);\r
+- }\r
+-\r
+-\r
+-\r
+- \r
+- // Loads geometry from IGES File\r
+- DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_IGES (const char * filename)\r
+- {\r
+- // Call the IGES File Load function. Note.. the geometry class \r
+- // is created and instantiated within the load function\r
+- OCCGeometry * occgeo = LoadOCC_IGES(filename);\r
+-\r
+- return ((Ng_OCC_Geometry *)occgeo);\r
+- }\r
+-\r
+-\r
+-\r
+- \r
+- // Loads geometry from BREP File\r
+- DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_BREP (const char * filename)\r
+- {\r
+- // Call the BREP File Load function. Note.. the geometry class \r
+- // is created and instantiated within the load function\r
+- OCCGeometry * occgeo = LoadOCC_BREP(filename);\r
+-\r
+- return ((Ng_OCC_Geometry *)occgeo);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Locally limit the size of the mesh to be generated at various points \r
+- // based on the topology of the geometry\r
+- DLL_HEADER Ng_Result Ng_OCC_SetLocalMeshSize (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- OCCGeometry * occgeom = (OCCGeometry*)geom;\r
+- Mesh * me = (Mesh*)mesh;\r
+-\r
+- me->geomtype = Mesh::GEOM_OCC;\r
+-\r
+- mp->Transfer_Parameters();\r
+- \r
+- occparam.resthcloseedgeenable = mp->closeedgeenable;\r
+- occparam.resthcloseedgefac = mp->closeedgefact;\r
+-\r
+- // Delete the mesh structures in order to start with a clean \r
+- // slate\r
+- me->DeleteMesh();\r
+-\r
+- OCCSetLocalMeshSize(*occgeom, *me);\r
+-\r
+- return(NG_OK);\r
+- }\r
+-\r
+-\r
+-\r
+- \r
+- // Mesh the edges and add Face descriptors to prepare for surface meshing\r
+- DLL_HEADER Ng_Result Ng_OCC_GenerateEdgeMesh (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- OCCGeometry * occgeom = (OCCGeometry*)geom;\r
+- Mesh * me = (Mesh*)mesh;\r
+-\r
+- mp->Transfer_Parameters();\r
+-\r
+- OCCFindEdges(*occgeom, *me);\r
+-\r
+- if((me->GetNP()) && (me->GetNFD()))\r
+- {\r
+- return NG_OK;\r
+- }\r
+- else\r
+- {\r
+- return NG_ERROR;\r
+- }\r
+- }\r
+-\r
+-\r
+-\r
+- \r
+- // Mesh the edges and add Face descriptors to prepare for surface meshing\r
+- DLL_HEADER Ng_Result Ng_OCC_GenerateSurfaceMesh (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp)\r
+- {\r
+- int numpoints = 0;\r
+-\r
+- OCCGeometry * occgeom = (OCCGeometry*)geom;\r
+- Mesh * me = (Mesh*)mesh;\r
+-\r
+- // Set the internal meshing parameters structure from the nglib meshing \r
+- // parameters structure\r
+- mp->Transfer_Parameters();\r
+-\r
+-\r
+- // Only go into surface meshing if the face descriptors have already been added\r
+- if(!me->GetNFD())\r
+- return NG_ERROR;\r
+-\r
+- numpoints = me->GetNP();\r
+-\r
+- // Initially set up only for surface meshing without any optimisation\r
+- int perfstepsend = MESHCONST_MESHSURFACE;\r
+-\r
+- // Check and if required, enable surface mesh optimisation step\r
+- if(mp->optsurfmeshenable)\r
+- {\r
+- perfstepsend = MESHCONST_OPTSURFACE;\r
+- }\r
+-\r
+- OCCMeshSurface(*occgeom, *me, perfstepsend);\r
+-\r
+- me->CalcSurfacesOfNode();\r
+- \r
+- if(me->GetNP() <= numpoints)\r
+- return NG_ERROR;\r
+-\r
+- if(me->GetNSE() <= 0)\r
+- return NG_ERROR;\r
+-\r
+- return NG_OK;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Extract the face map from the OCC geometry\r
+- // The face map basically gives an index to each face in the geometry, \r
+- // which can be used to access a specific face\r
+- DLL_HEADER Ng_Result Ng_OCC_GetFMap(Ng_OCC_Geometry * geom, \r
+- Ng_OCC_TopTools_IndexedMapOfShape * FMap)\r
+- {\r
+- OCCGeometry* occgeom = (OCCGeometry*)geom;\r
+- TopTools_IndexedMapOfShape *occfmap = (TopTools_IndexedMapOfShape *)FMap;\r
+-\r
+- // Copy the face map from the geometry to the given variable\r
+- occfmap->Assign(occgeom->fmap);\r
+-\r
+- if(occfmap->Extent())\r
+- {\r
+- return NG_OK;\r
+- }\r
+- else\r
+- {\r
+- return NG_ERROR;\r
+- }\r
+- }\r
+-\r
+- // ------------------ End - OCC Geometry / Meshing Utility Functions ----------------\r
+-#endif\r
+-\r
+-\r
+-\r
+-\r
+- // ------------------ Begin - Meshing Parameters related functions ------------------\r
+- // Constructor for the local nglib meshing parameters class\r
+- DLL_HEADER Ng_Meshing_Parameters :: Ng_Meshing_Parameters()\r
+- {\r
+- uselocalh = 1;\r
+-\r
+- maxh = 1000;\r
+- minh = 0.0;\r
+-\r
+- fineness = 0.5;\r
+- grading = 0.3;\r
+-\r
+- elementsperedge = 2.0;\r
+- elementspercurve = 2.0;\r
+-\r
+- closeedgeenable = 0;\r
+- closeedgefact = 2.0;\r
+-\r
+- minedgelenenable = 0;\r
+- minedgelen = 1e-4;\r
+-\r
+- second_order = 0;\r
+- quad_dominated = 0;\r
+-\r
+- meshsize_filename = 0;\r
+-\r
+- optsurfmeshenable = 1;\r
+- optvolmeshenable = 1;\r
+-\r
+- optsteps_2d = 3;\r
+- optsteps_3d = 3;\r
+-\r
+- invert_tets = 0;\r
+- invert_trigs = 0;\r
+-\r
+- check_overlap = 1;\r
+- check_overlapping_boundary = 1;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // Reset the local meshing parameters to the default values\r
+- DLL_HEADER void Ng_Meshing_Parameters :: Reset_Parameters()\r
+- {\r
+- uselocalh = 1;\r
+-\r
+- maxh = 1000;\r
+- minh = 0;\r
+-\r
+- fineness = 0.5;\r
+- grading = 0.3;\r
+-\r
+- elementsperedge = 2.0;\r
+- elementspercurve = 2.0;\r
+-\r
+- closeedgeenable = 0;\r
+- closeedgefact = 2.0;\r
+-\r
+- minedgelenenable = 0;\r
+- minedgelen = 1e-4;\r
+-\r
+- second_order = 0;\r
+- quad_dominated = 0;\r
+-\r
+- meshsize_filename = 0;\r
+-\r
+- optsurfmeshenable = 1;\r
+- optvolmeshenable = 1;\r
+-\r
+- optsteps_2d = 3;\r
+- optsteps_3d = 3;\r
+-\r
+- invert_tets = 0;\r
+- invert_trigs = 0;\r
+-\r
+- check_overlap = 1;\r
+- check_overlapping_boundary = 1;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- // \r
+- DLL_HEADER void Ng_Meshing_Parameters :: Transfer_Parameters()\r
+- {\r
+- mparam.uselocalh = uselocalh;\r
+- \r
+- mparam.maxh = maxh;\r
+- mparam.minh = minh;\r
+-\r
+- mparam.grading = grading;\r
+- mparam.curvaturesafety = elementspercurve;\r
+- mparam.segmentsperedge = elementsperedge;\r
+-\r
+- mparam.secondorder = second_order;\r
+- mparam.quad = quad_dominated;\r
+-\r
+- mparam.meshsizefilename = meshsize_filename;\r
+-\r
+- mparam.optsteps2d = optsteps_2d;\r
+- mparam.optsteps3d = optsteps_3d;\r
+-\r
+- mparam.inverttets = invert_tets;\r
+- mparam.inverttrigs = invert_trigs;\r
+-\r
+- mparam.checkoverlap = check_overlap;\r
+- mparam.checkoverlappingboundary = check_overlapping_boundary;\r
+- }\r
+- // ------------------ End - Meshing Parameters related functions --------------------\r
+-\r
+-\r
+-\r
+-\r
+- // ------------------ Begin - Second Order Mesh generation functions ----------------\r
+- DLL_HEADER void Ng_Generate_SecondOrder(Ng_Mesh * mesh)\r
+- {\r
+- Refinement ref;\r
+- ref.MakeSecondOrder(*(Mesh*) mesh);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_2D_Generate_SecondOrder(Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ( (SplineGeometry2d*)geom ) -> GetRefinement().MakeSecondOrder( * (Mesh*) mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_STL_Generate_SecondOrder(Ng_STL_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ((STLGeometry*)geom)->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_CSG_Generate_SecondOrder (Ng_CSG_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ((CSGeometry*)geom)->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-#ifdef OCCGEOMETRY\r
+- DLL_HEADER void Ng_OCC_Generate_SecondOrder (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ((OCCGeometry*)geom )->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);\r
+- }\r
+-#endif\r
+- // ------------------ End - Second Order Mesh generation functions ------------------\r
+-\r
+-\r
+-\r
+-\r
+- // ------------------ Begin - Uniform Mesh Refinement functions ---------------------\r
+- DLL_HEADER void Ng_Uniform_Refinement (Ng_Mesh * mesh)\r
+- {\r
+- Refinement ref;\r
+- ref.Refine ( * (Mesh*) mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_2D_Uniform_Refinement (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ( (SplineGeometry2d*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_STL_Uniform_Refinement (Ng_STL_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ( (STLGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER void Ng_CSG_Uniform_Refinement (Ng_CSG_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ( (CSGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+-#ifdef OCCGEOMETRY\r
+- DLL_HEADER void Ng_OCC_Uniform_Refinement (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh)\r
+- {\r
+- ( (OCCGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );\r
+- }\r
+-#endif\r
+- // ------------------ End - Uniform Mesh Refinement functions -----------------------\r
+-} // End of namespace nglib\r
+-\r
+-\r
+-\r
+-\r
+-// compatibility functions:\r
+-namespace netgen \r
+-{\r
+- char geomfilename[255];\r
+-\r
+- DLL_HEADER void MyError (const char * ch)\r
+- {\r
+- cerr << ch;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- //Destination for messages, errors, ...\r
+- DLL_HEADER void Ng_PrintDest(const char * s)\r
+- {\r
+-#ifdef PARALLEL\r
+- int id = 0;\r
+- MPI_Comm_rank(MPI_COMM_WORLD, &id);\r
+- if (id != 0) return;\r
+-#endif\r
+- (*mycout) << s << flush;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- DLL_HEADER double GetTime ()\r
+- {\r
+- return 0;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void ResetTime ()\r
+- {\r
+- ;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void MyBeep (int i)\r
+- {\r
+- ;\r
+- }\r
+-\r
+-\r
+-\r
+-\r
+- void Render()\r
+- {\r
+- ; \r
+- }\r
+-} // End of namespace netgen\r
+-\r
+-\r
+-\r
+-\r
+-void Ng_Redraw () { ; }\r
+-void Ng_ClearSolutionData () { ; }\r
+-void Ng_SetSolutionData (Ng_SolutionData * soldata) \r
+-{ \r
+- delete soldata->solclass;\r
+-}\r
+-void Ng_InitSolutionData (Ng_SolutionData * soldata) { ; }\r
+-\r
+-\r
++/**************************************************************************/
++/* File: nglib.cpp */
++/* Author: Joachim Schoeberl */
++/* Date: 7. May. 2000 */
++/**************************************************************************/
++
++/*
++
++ Interface to the netgen meshing kernel
++
++*/
++#include <mystdlib.h>
++#include <myadt.hpp>
++
++#include <linalg.hpp>
++#include <csg.hpp>
++#include <stlgeom.hpp>
++#include <geometry2d.hpp>
++#include <meshing.hpp>
++#include <../visualization/soldata.hpp>
++
++#ifdef OCCGEOMETRY
++#include <occgeom.hpp>
++#endif
++
++#include <nginterface.h>
++
++
++namespace netgen {
++ extern void MeshFromSpline2D (SplineGeometry2d & geometry,
++ Mesh *& mesh,
++ MeshingParameters & mp);
++}
++
++
++
++#ifdef PARALLEL
++#include <mpi.h>
++
++namespace netgen
++{
++ // int id = 0, ntasks = 1;
++ MPI_Comm mesh_comm;
++}
++#endif
++
++
++namespace netgen
++{
++ int id = 0, ntasks = 1;
++}
++
++
++
++/*
++// should not be needed (occ currently requires it)
++namespace netgen {
++#include "../libsrc/visualization/vispar.hpp"
++ VisualizationParameters vispar;
++ VisualizationParameters :: VisualizationParameters() { ; }
++}
++*/
++
++
++namespace nglib {
++#include "nglib.h"
++}
++
++using namespace netgen;
++
++// constants and types:
++
++namespace nglib
++{
++ // initialize, deconstruct Netgen library:
++ DLL_HEADER void Ng_Init ()
++ {
++ mycout = &cout;
++ myerr = &cerr;
++ // netgen::testout->SetOutStream (new ofstream ("test.out"));
++ testout = new ofstream ("test.out");
++ }
++
++
++
++
++ // Clean-up functions before ending usage of nglib
++ DLL_HEADER void Ng_Exit ()
++ {
++ ;
++ }
++
++
++
++
++ // Create a new netgen mesh object
++ DLL_HEADER Ng_Mesh * Ng_NewMesh ()
++ {
++ Mesh * mesh = new Mesh;
++ mesh->AddFaceDescriptor (FaceDescriptor (1, 1, 0, 1));
++ return (Ng_Mesh*)(void*)mesh;
++ }
++
++
++
++
++ // Delete an existing netgen mesh object
++ DLL_HEADER void Ng_DeleteMesh (Ng_Mesh * mesh)
++ {
++ if(mesh != NULL)
++ {
++ // Delete the Mesh structures
++ ((Mesh*)mesh)->DeleteMesh();
++
++ // Now delete the Mesh class itself
++ delete (Mesh*)mesh;
++
++ // Set the Ng_Mesh pointer to NULL
++ mesh = NULL;
++ }
++ }
++
++
++
++
++ // Save a netgen mesh in the native VOL format
++ DLL_HEADER void Ng_SaveMesh(Ng_Mesh * mesh, const char* filename)
++ {
++ ((Mesh*)mesh)->Save(filename);
++ }
++
++
++
++
++ // Load a netgen native VOL mesh from a given file
++ DLL_HEADER Ng_Mesh * Ng_LoadMesh(const char* filename)
++ {
++ Mesh * mesh = new Mesh;
++ mesh->Load(filename);
++ return ( (Ng_Mesh*)mesh );
++ }
++
++
++
++
++ // Merge another mesh file into the currently loaded one
++ DLL_HEADER Ng_Result Ng_MergeMesh( Ng_Mesh* mesh, const char* filename)
++ {
++ Ng_Result status = NG_OK;
++
++ ifstream infile(filename);
++ Mesh * m = (Mesh*)mesh;
++
++ if(!infile.good())
++ {
++ status = NG_FILE_NOT_FOUND;
++ }
++
++ if(!m)
++ {
++ status = NG_ERROR;
++ }
++
++ if(status == NG_OK)
++ {
++ const int num_pts = m->GetNP();
++ const int face_offset = m->GetNFD();
++
++ m->Merge(infile, face_offset);
++
++ if(m->GetNP() > num_pts)
++ {
++ status = NG_OK;
++ }
++ else
++ {
++ status = NG_ERROR;
++ }
++ }
++
++ return status;
++ }
++
++
++
++
++ // Merge another mesh file into the currently loaded one
++ DLL_HEADER Ng_Result Ng_MergeMesh( Ng_Mesh* mesh1, Ng_Mesh* mesh2)
++ {
++ return NG_ERROR;
++ }
++
++
++
++
++ // Manually add a point to an existing mesh object
++ DLL_HEADER void Ng_AddPoint (Ng_Mesh * mesh, double * x)
++ {
++ Mesh * m = (Mesh*)mesh;
++ m->AddPoint (Point3d (x[0], x[1], x[2]));
++ }
++
++
++
++
++ // Manually add a surface element of a given type to an existing mesh object
++ DLL_HEADER void Ng_AddSurfaceElement (Ng_Mesh * mesh, Ng_Surface_Element_Type et,
++ int * pi)
++ {
++ Mesh * m = (Mesh*)mesh;
++ Element2d el (3);
++ el.SetIndex (1);
++ el.PNum(1) = pi[0];
++ el.PNum(2) = pi[1];
++ el.PNum(3) = pi[2];
++ m->AddSurfaceElement (el);
++ }
++
++
++
++
++ // Manually add a volume element of a given type to an existing mesh object
++ DLL_HEADER void Ng_AddVolumeElement (Ng_Mesh * mesh, Ng_Volume_Element_Type et,
++ int * pi)
++ {
++ Mesh * m = (Mesh*)mesh;
++ Element el (4);
++ el.SetIndex (1);
++ el.PNum(1) = pi[0];
++ el.PNum(2) = pi[1];
++ el.PNum(3) = pi[2];
++ el.PNum(4) = pi[3];
++ m->AddVolumeElement (el);
++ }
++
++
++
++
++ // Obtain the number of points in the mesh
++ DLL_HEADER int Ng_GetNP (Ng_Mesh * mesh)
++ {
++ return ((Mesh*)mesh) -> GetNP();
++ }
++
++
++
++
++ // Obtain the number of surface elements in the mesh
++ DLL_HEADER int Ng_GetNSE (Ng_Mesh * mesh)
++ {
++ return ((Mesh*)mesh) -> GetNSE();
++ }
++
++
++
++
++ // Obtain the number of volume elements in the mesh
++ DLL_HEADER int Ng_GetNE (Ng_Mesh * mesh)
++ {
++ return ((Mesh*)mesh) -> GetNE();
++ }
++
++
++
++
++ // Return point coordinates of a given point index in the mesh
++ DLL_HEADER void Ng_GetPoint (Ng_Mesh * mesh, int num, double * x)
++ {
++ const Point3d & p = ((Mesh*)mesh)->Point(num);
++ x[0] = p.X();
++ x[1] = p.Y();
++ x[2] = p.Z();
++ }
++
++
++
++
++ // Return the surface element at a given index "pi"
++ DLL_HEADER Ng_Surface_Element_Type
++ Ng_GetSurfaceElement (Ng_Mesh * mesh, int num, int * pi)
++ {
++ const Element2d & el = ((Mesh*)mesh)->SurfaceElement(num);
++ for (int i = 1; i <= el.GetNP(); i++)
++ pi[i-1] = el.PNum(i);
++ Ng_Surface_Element_Type et;
++ switch (el.GetNP())
++ {
++ case 3: et = NG_TRIG; break;
++ case 4: et = NG_QUAD; break;
++ case 6:
++ switch (el.GetNV())
++ {
++ case 3: et = NG_TRIG6; break;
++ case 4: et = NG_QUAD6; break;
++ default:
++ et = NG_TRIG6; break;
++ }
++ break;
++ case 8: et = NG_QUAD8; break;
++ default:
++ et = NG_TRIG; break; // for the compiler
++ }
++ return et;
++ }
++
++
++
++
++ // Return the volume element at a given index "pi"
++ DLL_HEADER Ng_Volume_Element_Type
++ Ng_GetVolumeElement (Ng_Mesh * mesh, int num, int * pi)
++ {
++ const Element & el = ((Mesh*)mesh)->VolumeElement(num);
++ for (int i = 1; i <= el.GetNP(); i++)
++ pi[i-1] = el.PNum(i);
++ Ng_Volume_Element_Type et;
++ switch (el.GetNP())
++ {
++ case 4: et = NG_TET; break;
++ case 5: et = NG_PYRAMID; break;
++ case 6: et = NG_PRISM; break;
++ case 10: et = NG_TET10; break;
++ default:
++ et = NG_TET; break; // for the compiler
++ }
++ return et;
++ }
++
++
++
++
++ // Set a global limit on the maximum mesh size allowed
++ DLL_HEADER void Ng_RestrictMeshSizeGlobal (Ng_Mesh * mesh, double h)
++ {
++ ((Mesh*)mesh) -> SetGlobalH (h);
++ }
++
++
++
++
++ // Set a local limit on the maximum mesh size allowed around the given point
++ DLL_HEADER void Ng_RestrictMeshSizePoint (Ng_Mesh * mesh, double * p, double h)
++ {
++ ((Mesh*)mesh) -> RestrictLocalH (Point3d (p[0], p[1], p[2]), h);
++ }
++
++
++
++
++ // Set a local limit on the maximum mesh size allowed within a given box region
++ DLL_HEADER void Ng_RestrictMeshSizeBox (Ng_Mesh * mesh, double * pmin, double * pmax, double h)
++ {
++ for (double x = pmin[0]; x < pmax[0]; x += h)
++ for (double y = pmin[1]; y < pmax[1]; y += h)
++ for (double z = pmin[2]; z < pmax[2]; z += h)
++ ((Mesh*)mesh) -> RestrictLocalH (Point3d (x, y, z), h);
++ }
++
++
++
++
++ // Generates volume mesh from an existing surface mesh
++ DLL_HEADER Ng_Result Ng_GenerateVolumeMesh (Ng_Mesh * mesh, Ng_Meshing_Parameters * mp)
++ {
++ Mesh * m = (Mesh*)mesh;
++
++ // Philippose - 30/08/2009
++ // Do not locally re-define "mparam" here... "mparam" is a global
++ // object
++ //MeshingParameters mparam;
++ mp->Transfer_Parameters();
++
++ m->CalcLocalH(mparam.grading);
++
++ MeshVolume (mparam, *m);
++ RemoveIllegalElements (*m);
++ OptimizeVolume (mparam, *m);
++
++ return NG_OK;
++ }
++
++
++
++
++ /* ------------------ 2D Meshing Functions ------------------------- */
++ DLL_HEADER void Ng_AddPoint_2D (Ng_Mesh * mesh, double * x)
++ {
++ Mesh * m = (Mesh*)mesh;
++
++ m->AddPoint (Point3d (x[0], x[1], 0));
++ }
++
++
++
++
++ DLL_HEADER void Ng_AddBoundarySeg_2D (Ng_Mesh * mesh, int pi1, int pi2)
++ {
++ Mesh * m = (Mesh*)mesh;
++
++ Segment seg;
++ seg[0] = pi1;
++ seg[1] = pi2;
++ m->AddSegment (seg);
++ }
++
++
++
++
++ DLL_HEADER int Ng_GetNP_2D (Ng_Mesh * mesh)
++ {
++ Mesh * m = (Mesh*)mesh;
++ return m->GetNP();
++ }
++
++
++
++
++ DLL_HEADER int Ng_GetNE_2D (Ng_Mesh * mesh)
++ {
++ Mesh * m = (Mesh*)mesh;
++ return m->GetNSE();
++ }
++
++
++
++
++ DLL_HEADER int Ng_GetNSeg_2D (Ng_Mesh * mesh)
++ {
++ Mesh * m = (Mesh*)mesh;
++ return m->GetNSeg();
++ }
++
++
++
++
++ DLL_HEADER void Ng_GetPoint_2D (Ng_Mesh * mesh, int num, double * x)
++ {
++ Mesh * m = (Mesh*)mesh;
++
++ Point<3> & p = m->Point(num);
++ x[0] = p(0);
++ x[1] = p(1);
++ }
++
++
++
++
++ DLL_HEADER Ng_Surface_Element_Type
++ Ng_GetElement_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum)
++ {
++ const Element2d & el = ((Mesh*)mesh)->SurfaceElement(num);
++ for (int i = 1; i <= el.GetNP(); i++)
++ pi[i-1] = el.PNum(i);
++
++ Ng_Surface_Element_Type et;
++ switch (el.GetNP())
++ {
++ case 3: et = NG_TRIG; break;
++ case 4: et = NG_QUAD; break;
++ case 6:
++ switch (el.GetNV())
++ {
++ case 3: et = NG_TRIG6; break;
++ case 4: et = NG_QUAD6; break;
++ default:
++ et = NG_TRIG6; break;
++ }
++ break;
++ case 8: et = NG_QUAD8; break;
++ default:
++ et = NG_TRIG; break; // for the compiler
++ }
++
++ if (matnum)
++ *matnum = el.GetIndex();
++
++ return et;
++ }
++
++
++
++
++ DLL_HEADER void Ng_GetSegment_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum)
++ {
++ const Segment & seg = ((Mesh*)mesh)->LineSegment(num);
++ pi[0] = seg[0];
++ pi[1] = seg[1];
++
++ if (matnum)
++ *matnum = seg.edgenr;
++ }
++
++
++
++
++ DLL_HEADER Ng_Geometry_2D * Ng_LoadGeometry_2D (const char * filename)
++ {
++ SplineGeometry2d * geom = new SplineGeometry2d();
++ geom -> Load (filename);
++ return (Ng_Geometry_2D *)geom;
++ }
++
++
++
++
++ DLL_HEADER Ng_Result Ng_GenerateMesh_2D (Ng_Geometry_2D * geom,
++ Ng_Mesh ** mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ // use global variable mparam
++ // MeshingParameters mparam;
++ mp->Transfer_Parameters();
++
++ Mesh * m;
++ MeshFromSpline2D (*(SplineGeometry2d*)geom, m, mparam);
++
++ cout << m->GetNSE() << " elements, " << m->GetNP() << " points" << endl;
++
++ *mesh = (Ng_Mesh*)m;
++ return NG_OK;
++ }
++
++
++
++
++ DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh,
++ int levels)
++ {
++ Refinement2d ref(*(SplineGeometry2d*)geom);
++ HPRefinement (*(Mesh*)mesh, &ref, levels);
++ }
++
++
++
++
++ DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh,
++ int levels, double parameter)
++ {
++ Refinement2d ref(*(SplineGeometry2d*)geom);
++ HPRefinement (*(Mesh*)mesh, &ref, levels, parameter);
++ }
++
++
++
++
++ Array<STLReadTriangle> readtrias; //only before initstlgeometry
++ Array<Point<3> > readedges; //only before init stlgeometry
++
++ // loads geometry from STL file
++ DLL_HEADER Ng_STL_Geometry * Ng_STL_LoadGeometry (const char * filename, int binary)
++ {
++ int i;
++ STLGeometry geom;
++ STLGeometry* geo;
++ ifstream ist(filename);
++
++ if (binary)
++ {
++ geo = geom.LoadBinary(ist);
++ }
++ else
++ {
++ geo = geom.Load(ist);
++ }
++
++ readtrias.SetSize(0);
++ readedges.SetSize(0);
++
++ Point3d p;
++ Vec3d normal;
++ double p1[3];
++ double p2[3];
++ double p3[3];
++ double n[3];
++
++ Ng_STL_Geometry * geo2 = Ng_STL_NewGeometry();
++
++ for (i = 1; i <= geo->GetNT(); i++)
++ {
++ const STLTriangle& t = geo->GetTriangle(i);
++ p = geo->GetPoint(t.PNum(1));
++ p1[0] = p.X(); p1[1] = p.Y(); p1[2] = p.Z();
++ p = geo->GetPoint(t.PNum(2));
++ p2[0] = p.X(); p2[1] = p.Y(); p2[2] = p.Z();
++ p = geo->GetPoint(t.PNum(3));
++ p3[0] = p.X(); p3[1] = p.Y(); p3[2] = p.Z();
++ normal = t.Normal();
++ n[0] = normal.X(); n[1] = normal.Y(); n[2] = normal.Z();
++
++ Ng_STL_AddTriangle(geo2, p1, p2, p3, n);
++ }
++
++ return geo2;
++ }
++
++
++
++
++ // generate new STL Geometry
++ DLL_HEADER Ng_STL_Geometry * Ng_STL_NewGeometry ()
++ {
++ return (Ng_STL_Geometry*)(void*)new STLGeometry;
++ }
++
++
++
++
++ // after adding triangles (and edges) initialize
++ DLL_HEADER Ng_Result Ng_STL_InitSTLGeometry (Ng_STL_Geometry * geom)
++ {
++ STLGeometry* geo = (STLGeometry*)geom;
++ geo->InitSTLGeometry(readtrias);
++ readtrias.SetSize(0);
++
++ if (readedges.Size() != 0)
++ {
++ /*
++ for (int i = 1; i <= readedges.Size(); i+=2)
++ {
++ cout << "e(" << readedges.Get(i) << "," << readedges.Get(i+1) << ")" << endl;
++ }
++ */
++ geo->AddEdges(readedges);
++ }
++
++ if (geo->GetStatus() == STLTopology::STL_GOOD || geo->GetStatus() == STLTopology::STL_WARNING) return NG_OK;
++ return NG_SURFACE_INPUT_ERROR;
++ }
++
++
++
++
++ // automatically generates edges:
++ DLL_HEADER Ng_Result Ng_STL_MakeEdges (Ng_STL_Geometry * geom,
++ Ng_Mesh* mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ STLGeometry* stlgeometry = (STLGeometry*)geom;
++ Mesh* me = (Mesh*)mesh;
++
++ // Philippose - 27/07/2009
++ // Do not locally re-define "mparam" here... "mparam" is a global
++ // object
++ //MeshingParameters mparam;
++ mp->Transfer_Parameters();
++
++ me -> SetGlobalH (mparam.maxh);
++ me -> SetLocalH (stlgeometry->GetBoundingBox().PMin() - Vec3d(10, 10, 10),
++ stlgeometry->GetBoundingBox().PMax() + Vec3d(10, 10, 10),
++ 0.3);
++
++ me -> LoadLocalMeshSize (mp->meshsize_filename);
++ /*
++ if (mp->meshsize_filename)
++ {
++ ifstream infile (mp->meshsize_filename);
++ if (!infile.good()) return NG_FILE_NOT_FOUND;
++ me -> LoadLocalMeshSize (infile);
++ }
++ */
++
++ STLMeshing (*stlgeometry, *me);
++
++ stlgeometry->edgesfound = 1;
++ stlgeometry->surfacemeshed = 0;
++ stlgeometry->surfaceoptimized = 0;
++ stlgeometry->volumemeshed = 0;
++
++ return NG_OK;
++ }
++
++
++
++
++ // generates mesh, empty mesh be already created.
++ DLL_HEADER Ng_Result Ng_STL_GenerateSurfaceMesh (Ng_STL_Geometry * geom,
++ Ng_Mesh* mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ STLGeometry* stlgeometry = (STLGeometry*)geom;
++ Mesh* me = (Mesh*)mesh;
++
++ // Philippose - 27/07/2009
++ // Do not locally re-define "mparam" here... "mparam" is a global
++ // object
++ //MeshingParameters mparam;
++ mp->Transfer_Parameters();
++
++
++ /*
++ me -> SetGlobalH (mparam.maxh);
++ me -> SetLocalH (stlgeometry->GetBoundingBox().PMin() - Vec3d(10, 10, 10),
++ stlgeometry->GetBoundingBox().PMax() + Vec3d(10, 10, 10),
++ 0.3);
++ */
++ /*
++ STLMeshing (*stlgeometry, *me);
++
++ stlgeometry->edgesfound = 1;
++ stlgeometry->surfacemeshed = 0;
++ stlgeometry->surfaceoptimized = 0;
++ stlgeometry->volumemeshed = 0;
++ */
++ int retval = STLSurfaceMeshing (*stlgeometry, *me);
++ if (retval == MESHING3_OK)
++ {
++ (*mycout) << "Success !!!!" << endl;
++ stlgeometry->surfacemeshed = 1;
++ stlgeometry->surfaceoptimized = 0;
++ stlgeometry->volumemeshed = 0;
++ }
++ else if (retval == MESHING3_OUTERSTEPSEXCEEDED)
++ {
++ (*mycout) << "ERROR: Give up because of too many trials. Meshing aborted!" << endl;
++ }
++ else if (retval == MESHING3_TERMINATE)
++ {
++ (*mycout) << "Meshing Stopped!" << endl;
++ }
++ else
++ {
++ (*mycout) << "ERROR: Surface meshing not successful. Meshing aborted!" << endl;
++ }
++
++
++ STLSurfaceOptimization (*stlgeometry, *me, mparam);
++
++ return NG_OK;
++ }
++
++
++
++
++ // fills STL Geometry
++ // positive orientation
++ // normal vector may be null-pointer
++ DLL_HEADER void Ng_STL_AddTriangle (Ng_STL_Geometry * geom,
++ double * p1, double * p2, double * p3,
++ double * nv)
++ {
++ Point<3> apts[3];
++ apts[0] = Point<3>(p1[0],p1[1],p1[2]);
++ apts[1] = Point<3>(p2[0],p2[1],p2[2]);
++ apts[2] = Point<3>(p3[0],p3[1],p3[2]);
++
++ Vec<3> n;
++ if (!nv)
++ n = Cross (apts[0]-apts[1], apts[0]-apts[2]);
++ else
++ n = Vec<3>(nv[0],nv[1],nv[2]);
++
++ readtrias.Append(STLReadTriangle(apts,n));
++ }
++
++ // add (optional) edges:
++ DLL_HEADER void Ng_STL_AddEdge (Ng_STL_Geometry * geom,
++ double * p1, double * p2)
++ {
++ readedges.Append(Point3d(p1[0],p1[1],p1[2]));
++ readedges.Append(Point3d(p2[0],p2[1],p2[2]));
++ }
++
++
++
++
++#ifdef OCCGEOMETRY
++ // --------------------- OCC Geometry / Meshing Utility Functions -------------------
++ // Create new OCC Geometry Object
++ DLL_HEADER Ng_OCC_Geometry * Ng_OCC_NewGeometry ()
++ {
++ return (Ng_OCC_Geometry*)(void*)new OCCGeometry;
++ }
++
++
++
++
++ // Delete the OCC Geometry Object
++ DLL_HEADER Ng_Result Ng_OCC_DeleteGeometry(Ng_OCC_Geometry * geom)
++ {
++ if (geom != NULL)
++ {
++ delete (OCCGeometry*)geom;
++ geom = NULL;
++ return NG_OK;
++ }
++
++ return NG_ERROR;
++ }
++
++
++
++
++ // Loads geometry from STEP File
++ DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_STEP (const char * filename)
++ {
++ // Call the STEP File Load function. Note.. the geometry class
++ // is created and instantiated within the load function
++ OCCGeometry * occgeo = LoadOCC_STEP(filename);
++
++ return ((Ng_OCC_Geometry *)occgeo);
++ }
++
++
++
++
++ // Loads geometry from IGES File
++ DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_IGES (const char * filename)
++ {
++ // Call the IGES File Load function. Note.. the geometry class
++ // is created and instantiated within the load function
++ OCCGeometry * occgeo = LoadOCC_IGES(filename);
++
++ return ((Ng_OCC_Geometry *)occgeo);
++ }
++
++
++
++
++ // Loads geometry from BREP File
++ DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_BREP (const char * filename)
++ {
++ // Call the BREP File Load function. Note.. the geometry class
++ // is created and instantiated within the load function
++ OCCGeometry * occgeo = LoadOCC_BREP(filename);
++
++ return ((Ng_OCC_Geometry *)occgeo);
++ }
++
++
++
++
++ // Locally limit the size of the mesh to be generated at various points
++ // based on the topology of the geometry
++ DLL_HEADER Ng_Result Ng_OCC_SetLocalMeshSize (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ OCCGeometry * occgeom = (OCCGeometry*)geom;
++ Mesh * me = (Mesh*)mesh;
++
++ me->geomtype = Mesh::GEOM_OCC;
++
++ mp->Transfer_Parameters();
++
++ occparam.resthcloseedgeenable = mp->closeedgeenable;
++ occparam.resthcloseedgefac = mp->closeedgefact;
++
++ // Delete the mesh structures in order to start with a clean
++ // slate
++ me->DeleteMesh();
++
++ OCCSetLocalMeshSize(*occgeom, *me);
++
++ return(NG_OK);
++ }
++
++
++
++
++ // Mesh the edges and add Face descriptors to prepare for surface meshing
++ DLL_HEADER Ng_Result Ng_OCC_GenerateEdgeMesh (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ OCCGeometry * occgeom = (OCCGeometry*)geom;
++ Mesh * me = (Mesh*)mesh;
++
++ mp->Transfer_Parameters();
++
++ OCCFindEdges(*occgeom, *me);
++
++ if((me->GetNP()) && (me->GetNFD()))
++ {
++ return NG_OK;
++ }
++ else
++ {
++ return NG_ERROR;
++ }
++ }
++
++
++
++
++ // Mesh the edges and add Face descriptors to prepare for surface meshing
++ DLL_HEADER Ng_Result Ng_OCC_GenerateSurfaceMesh (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp)
++ {
++ int numpoints = 0;
++
++ OCCGeometry * occgeom = (OCCGeometry*)geom;
++ Mesh * me = (Mesh*)mesh;
++
++ // Set the internal meshing parameters structure from the nglib meshing
++ // parameters structure
++ mp->Transfer_Parameters();
++
++
++ // Only go into surface meshing if the face descriptors have already been added
++ if(!me->GetNFD())
++ return NG_ERROR;
++
++ numpoints = me->GetNP();
++
++ // Initially set up only for surface meshing without any optimisation
++ int perfstepsend = MESHCONST_MESHSURFACE;
++
++ // Check and if required, enable surface mesh optimisation step
++ if(mp->optsurfmeshenable)
++ {
++ perfstepsend = MESHCONST_OPTSURFACE;
++ }
++
++ OCCMeshSurface(*occgeom, *me, perfstepsend);
++
++ me->CalcSurfacesOfNode();
++
++ if(me->GetNP() <= numpoints)
++ return NG_ERROR;
++
++ if(me->GetNSE() <= 0)
++ return NG_ERROR;
++
++ return NG_OK;
++ }
++
++
++
++
++ // Extract the face map from the OCC geometry
++ // The face map basically gives an index to each face in the geometry,
++ // which can be used to access a specific face
++ DLL_HEADER Ng_Result Ng_OCC_GetFMap(Ng_OCC_Geometry * geom,
++ Ng_OCC_TopTools_IndexedMapOfShape * FMap)
++ {
++ OCCGeometry* occgeom = (OCCGeometry*)geom;
++ TopTools_IndexedMapOfShape *occfmap = (TopTools_IndexedMapOfShape *)FMap;
++
++ // Copy the face map from the geometry to the given variable
++ occfmap->Assign(occgeom->fmap);
++
++ if(occfmap->Extent())
++ {
++ return NG_OK;
++ }
++ else
++ {
++ return NG_ERROR;
++ }
++ }
++
++ // ------------------ End - OCC Geometry / Meshing Utility Functions ----------------
++#endif
++
++
++
++
++ // ------------------ Begin - Meshing Parameters related functions ------------------
++ // Constructor for the local nglib meshing parameters class
++ DLL_HEADER Ng_Meshing_Parameters :: Ng_Meshing_Parameters()
++ {
++ uselocalh = 1;
++
++ maxh = 1000;
++ minh = 0.0;
++
++ fineness = 0.5;
++ grading = 0.3;
++
++ elementsperedge = 2.0;
++ elementspercurve = 2.0;
++
++ closeedgeenable = 0;
++ closeedgefact = 2.0;
++
++ minedgelenenable = 0;
++ minedgelen = 1e-4;
++
++ second_order = 0;
++ quad_dominated = 0;
++
++ meshsize_filename = 0;
++
++ optsurfmeshenable = 1;
++ optvolmeshenable = 1;
++
++ optsteps_2d = 3;
++ optsteps_3d = 3;
++
++ invert_tets = 0;
++ invert_trigs = 0;
++
++ check_overlap = 1;
++ check_overlapping_boundary = 1;
++ }
++
++
++
++
++ // Reset the local meshing parameters to the default values
++ DLL_HEADER void Ng_Meshing_Parameters :: Reset_Parameters()
++ {
++ uselocalh = 1;
++
++ maxh = 1000;
++ minh = 0;
++
++ fineness = 0.5;
++ grading = 0.3;
++
++ elementsperedge = 2.0;
++ elementspercurve = 2.0;
++
++ closeedgeenable = 0;
++ closeedgefact = 2.0;
++
++ minedgelenenable = 0;
++ minedgelen = 1e-4;
++
++ second_order = 0;
++ quad_dominated = 0;
++
++ meshsize_filename = 0;
++
++ optsurfmeshenable = 1;
++ optvolmeshenable = 1;
++
++ optsteps_2d = 3;
++ optsteps_3d = 3;
++
++ invert_tets = 0;
++ invert_trigs = 0;
++
++ check_overlap = 1;
++ check_overlapping_boundary = 1;
++ }
++
++
++
++
++ //
++ DLL_HEADER void Ng_Meshing_Parameters :: Transfer_Parameters()
++ {
++ mparam.uselocalh = uselocalh;
++
++ mparam.maxh = maxh;
++ mparam.minh = minh;
++
++ mparam.grading = grading;
++ mparam.curvaturesafety = elementspercurve;
++ mparam.segmentsperedge = elementsperedge;
++
++ mparam.secondorder = second_order;
++ mparam.quad = quad_dominated;
++
++ mparam.meshsizefilename = meshsize_filename;
++
++ mparam.optsteps2d = optsteps_2d;
++ mparam.optsteps3d = optsteps_3d;
++
++ mparam.inverttets = invert_tets;
++ mparam.inverttrigs = invert_trigs;
++
++ mparam.checkoverlap = check_overlap;
++ mparam.checkoverlappingboundary = check_overlapping_boundary;
++ }
++ // ------------------ End - Meshing Parameters related functions --------------------
++
++
++
++
++ // ------------------ Begin - Second Order Mesh generation functions ----------------
++ DLL_HEADER void Ng_Generate_SecondOrder(Ng_Mesh * mesh)
++ {
++ Refinement ref;
++ ref.MakeSecondOrder(*(Mesh*) mesh);
++ }
++
++
++
++
++ DLL_HEADER void Ng_2D_Generate_SecondOrder(Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh)
++ {
++ ( (SplineGeometry2d*)geom ) -> GetRefinement().MakeSecondOrder( * (Mesh*) mesh );
++ }
++
++
++
++
++ DLL_HEADER void Ng_STL_Generate_SecondOrder(Ng_STL_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ((STLGeometry*)geom)->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);
++ }
++
++
++
++
++ DLL_HEADER void Ng_CSG_Generate_SecondOrder (Ng_CSG_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ((CSGeometry*)geom)->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);
++ }
++
++
++
++
++#ifdef OCCGEOMETRY
++ DLL_HEADER void Ng_OCC_Generate_SecondOrder (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ((OCCGeometry*)geom )->GetRefinement().MakeSecondOrder(*(Mesh*) mesh);
++ }
++#endif
++ // ------------------ End - Second Order Mesh generation functions ------------------
++
++
++
++
++ // ------------------ Begin - Uniform Mesh Refinement functions ---------------------
++ DLL_HEADER void Ng_Uniform_Refinement (Ng_Mesh * mesh)
++ {
++ Refinement ref;
++ ref.Refine ( * (Mesh*) mesh );
++ }
++
++
++
++
++ DLL_HEADER void Ng_2D_Uniform_Refinement (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh)
++ {
++ ( (SplineGeometry2d*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );
++ }
++
++
++
++
++ DLL_HEADER void Ng_STL_Uniform_Refinement (Ng_STL_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ( (STLGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );
++ }
++
++
++
++
++ DLL_HEADER void Ng_CSG_Uniform_Refinement (Ng_CSG_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ( (CSGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );
++ }
++
++
++
++
++#ifdef OCCGEOMETRY
++ DLL_HEADER void Ng_OCC_Uniform_Refinement (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh)
++ {
++ ( (OCCGeometry*)geom ) -> GetRefinement().Refine ( * (Mesh*) mesh );
++ }
++#endif
++ // ------------------ End - Uniform Mesh Refinement functions -----------------------
++} // End of namespace nglib
++
++
++
++
++// compatibility functions:
++namespace netgen
++{
++ char geomfilename[255];
++
++ DLL_HEADER void MyError (const char * ch)
++ {
++ cerr << ch;
++ }
++
++
++
++
++ //Destination for messages, errors, ...
++ DLL_HEADER void Ng_PrintDest(const char * s)
++ {
++#ifdef PARALLEL
++ int id = 0;
++ MPI_Comm_rank(MPI_COMM_WORLD, &id);
++ if (id != 0) return;
++#endif
++ (*mycout) << s << flush;
++ }
++
++
++
++
++ DLL_HEADER double GetTime ()
++ {
++ return 0;
++ }
++
++
++
++
++ void ResetTime ()
++ {
++ ;
++ }
++
++
++
++
++ void MyBeep (int i)
++ {
++ ;
++ }
++
++
++
++
++ void Render()
++ {
++ ;
++ }
++} // End of namespace netgen
++
++
++
++
++void Ng_Redraw () { ; }
++void Ng_ClearSolutionData () { ; }
++void Ng_SetSolutionData (Ng_SolutionData * soldata)
++{
++ delete soldata->solclass;
++}
++void Ng_InitSolutionData (Ng_SolutionData * soldata) { ; }
++
++
+diff -Naur netgen-5.3.1_SRC_orig/nglib/nglib.h netgen-5.3.1_SRC_modif/nglib/nglib.h
+--- netgen-5.3.1_SRC_orig/nglib/nglib.h 2014-08-29 13:54:00.000000000 +0400
++++ netgen-5.3.1_SRC_modif/nglib/nglib.h 2019-11-14 16:56:25.350369905 +0300
+@@ -1,747 +1,747 @@
+-#ifndef NGLIB\r
+-#define NGLIB\r
+-\r
+-/**************************************************************************/\r
+-/* File: nglib.h */\r
+-/* Author: Joachim Schoeberl */\r
+-/* Date: 7. May. 2000 */\r
+-/**************************************************************************/\r
+-\r
+-/*!\r
+- \file nglib.h\r
+- \brief Library interface to the netgen meshing kernel\r
+- \author Joachim Schoeberl\r
+- \date 7. May 2000\r
+-\r
+- This header file provides access to the core functionality of the Netgen \r
+- Mesher via a library interface, without an interactive User Interface.\r
+-\r
+- The intention of providing these set of functions is to allow system \r
+- developers to integrate Netgen into top-level code, to act as the low \r
+- level mesh generation / optimisation kernel. \r
+-*/\r
+-\r
+-// Philippose - 14.02.2009\r
+-// Modifications for creating a DLL in Windows\r
+-#ifdef WIN32\r
+- #ifdef NGLIB_EXPORTS || nglib_EXPORTS\r
+- #define DLL_HEADER __declspec(dllexport)\r
+- #else\r
+- #define DLL_HEADER __declspec(dllimport)\r
+- #endif\r
+-#else\r
+- #define DLL_HEADER \r
+-#endif\r
+-\r
+-\r
+-\r
+-// ** Constants used within Netgen *********************\r
+-/// Maximum allowed number of nodes per volume element\r
+-#define NG_VOLUME_ELEMENT_MAXPOINTS 10\r
+-\r
+-/// Maximum allowed number of nodes per surface element\r
+-#define NG_SURFACE_ELEMENT_MAXPOINTS 8\r
+-\r
+-\r
+-\r
+-// *** Data-types for accessing Netgen functionality ***\r
+-/// Data type for NETGEN mesh\r
+-typedef void * Ng_Mesh;\r
+-\r
+-/// Data type for NETGEN CSG geometry\r
+-typedef void * Ng_CSG_Geometry;\r
+-\r
+-/// Data type for NETGEN 2D geometry\r
+-typedef void * Ng_Geometry_2D;\r
+-\r
+-/// Data type for NETGEN STL geometry\r
+-typedef void * Ng_STL_Geometry;\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-/// Data type for NETGEN OpenCascade geometry\r
+-typedef void * Ng_OCC_Geometry;\r
+-typedef void * Ng_OCC_TopTools_IndexedMapOfShape;\r
+-#endif\r
+-\r
+-\r
+-// *** Special Enum types used within Netgen ***********\r
+-/// Currently implemented surface element types\r
+-enum Ng_Surface_Element_Type \r
+- { NG_TRIG = 1, NG_QUAD = 2, NG_TRIG6 = 3, NG_QUAD6 = 4, NG_QUAD8 = 5 };\r
+-\r
+-/// Currently implemented volume element types\r
+-enum Ng_Volume_Element_Type \r
+- { NG_TET = 1, NG_PYRAMID = 2, NG_PRISM = 3, NG_TET10 = 4 };\r
+-\r
+-/// Values returned by Netgen functions\r
+-enum Ng_Result \r
+- { \r
+- NG_ERROR = -1, \r
+- NG_OK = 0, \r
+- NG_SURFACE_INPUT_ERROR = 1,\r
+- NG_VOLUME_FAILURE = 2, \r
+- NG_STL_INPUT_ERROR = 3,\r
+- NG_SURFACE_FAILURE = 4,\r
+- NG_FILE_NOT_FOUND = 5 \r
+- };\r
+-\r
+-\r
+-\r
+-// *** Classes required for use within Netgen **********\r
+-/// Netgen Meshing Parameters class\r
+-class Ng_Meshing_Parameters \r
+-{\r
+-public:\r
+- int uselocalh; //!< Switch to enable / disable usage of local mesh size modifiers\r
+-\r
+- double maxh; //!< Maximum global mesh size allowed\r
+- double minh; //!< Minimum global mesh size allowed\r
+-\r
+- double fineness; //!< Mesh density: 0...1 (0 => coarse; 1 => fine)\r
+- double grading; //!< Mesh grading: 0...1 (0 => uniform mesh; 1 => aggressive local grading)\r
+-\r
+- double elementsperedge; //!< Number of elements to generate per edge of the geometry\r
+- double elementspercurve; //!< Elements to generate per curvature radius\r
+-\r
+- int closeedgeenable; //!< Enable / Disable mesh refinement at close edges\r
+- double closeedgefact; //!< Factor to use for refinement at close edges (larger => finer)\r
+-\r
+- int minedgelenenable; //!< Enable / Disable user defined minimum edge length for edge subdivision\r
+- double minedgelen; //!< Minimum edge length to use while subdividing the edges (default = 1e-4)\r
+-\r
+- int second_order; //!< Generate second-order surface and volume elements\r
+- int quad_dominated; //!< Creates a Quad-dominated mesh \r
+-\r
+- char * meshsize_filename; //!< Optional external mesh size file \r
+-\r
+- int optsurfmeshenable; //!< Enable / Disable automatic surface mesh optimization\r
+- int optvolmeshenable; //!< Enable / Disable automatic volume mesh optimization\r
+-\r
+- int optsteps_3d; //!< Number of optimize steps to use for 3-D mesh optimization\r
+- int optsteps_2d; //!< Number of optimize steps to use for 2-D mesh optimization\r
+-\r
+- // Philippose - 13/09/2010\r
+- // Added a couple more parameters into the meshing parameters list \r
+- // from Netgen into Nglib\r
+- int invert_tets; //!< Invert all the volume elements\r
+- int invert_trigs; //!< Invert all the surface triangle elements\r
+-\r
+- int check_overlap; //!< Check for overlapping surfaces during Surface meshing\r
+- int check_overlapping_boundary; //!< Check for overlapping surface elements before volume meshing\r
+-\r
+-\r
+- /*!\r
+- Default constructor for the Mesh Parameters class\r
+-\r
+- Note: This constructor initialises the variables in the \r
+- class with the following default values\r
+- - #uselocalh: 1\r
+- - #maxh: 1000.0\r
+- - #fineness: 0.5\r
+- - #grading: 0.3\r
+- - #elementsperedge: 2.0\r
+- - #elementspercurve: 2.0\r
+- - #closeedgeenable: 0\r
+- - #closeedgefact: 2.0\r
+- - #secondorder: 0\r
+- - #meshsize_filename: null\r
+- - #quad_dominated: 0\r
+- - #optsurfmeshenable: 1\r
+- - #optvolmeshenable: 1\r
+- - #optsteps_2d: 3\r
+- - #optsteps_3d: 3\r
+- - #invert_tets: 0\r
+- - #invert_trigs:0 \r
+- - #check_overlap: 1\r
+- - #check_overlapping_boundary: 1\r
+- */\r
+- DLL_HEADER Ng_Meshing_Parameters();\r
+-\r
+-\r
+-\r
+- /*!\r
+- Reset the meshing parameters to their defaults\r
+-\r
+- This member function resets all the meshing parameters \r
+- of the object to the default values\r
+- */\r
+- DLL_HEADER void Reset_Parameters();\r
+-\r
+-\r
+-\r
+- /*!\r
+- Transfer local meshing parameters to internal meshing parameters\r
+-\r
+- This member function transfers all the meshing parameters \r
+- defined in the local meshing parameters structure of nglib into \r
+- the internal meshing parameters structure used by the Netgen core\r
+- */\r
+- DLL_HEADER void Transfer_Parameters();\r
+-};\r
+-\r
+-\r
+-\r
+-\r
+-// *** Functions Exported by this Library *************\r
+-\r
+-// ------------------------------------------------------------------\r
+-// Netgen library initialisation / destruction functions\r
+-\r
+-/*! \brief Initialise the Netgen library and prepare for use\r
+-\r
+- This function needs to be called by the third-party \r
+- program before beginning to use the other Netgen \r
+- specific functions.\r
+-*/\r
+-DLL_HEADER void Ng_Init ();\r
+-\r
+-\r
+-/*! \brief Exit the Netgen meshing kernel in a clean manner\r
+-\r
+- Use this function to exit the meshing sub-system in \r
+- a clean and orderly manner.\r
+-*/\r
+-DLL_HEADER void Ng_Exit ();\r
+- \r
+-\r
+-/*! \brief Create a new (and empty) Netgen Mesh Structure\r
+-\r
+- This function creates a new Netgen Mesh, initialises \r
+- it, and returns a pointer to the created mesh structure. \r
+-\r
+- Use the returned pointer for subsequent operations \r
+- which involve mesh operations.\r
+-\r
+- \return Ng_Mesh Pointer to a Netgen Mesh type #Ng_Mesh\r
+-*/\r
+-DLL_HEADER Ng_Mesh * Ng_NewMesh ();\r
+-\r
+-\r
+-/*! \brief Delete an existing Netgen Mesh Structure\r
+-\r
+- Use this function to delete an existing Netgen mesh \r
+- structure and release the used memory. \r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure \r
+- of type #Ng_Mesh\r
+-*/\r
+-DLL_HEADER void Ng_DeleteMesh (Ng_Mesh * mesh);\r
+-\r
+-\r
+-/*! \brief Save a Netgen Mesh to disk\r
+-\r
+- This function allows a generated mesh structure to be saved \r
+- to disk.\r
+-\r
+- A Mesh saved using this function, will be written to disk \r
+- in the Netgen VOL file format.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure \r
+- of type #Ng_Mesh\r
+- \param filename Pointer to a character array containing the \r
+- name of the file to which the mesh should \r
+- be saved\r
+-*/\r
+-DLL_HEADER void Ng_SaveMesh(Ng_Mesh * mesh, const char* filename);\r
+-\r
+-\r
+-/*! \brief Load a Netgen VOL Mesh from disk into memory\r
+-\r
+- A Netgen mesh saved in the internal VOL format can be loaded \r
+- into a Netgen Mesh structure using this function. \r
+-\r
+- \param filename Pointer to a character array containing the \r
+- name of the file to load\r
+- \return Ng_Mesh Pointer to a Netgen Mesh type #Ng_Mesh containing \r
+- the mesh loaded from disk\r
+-*/\r
+-DLL_HEADER Ng_Mesh * Ng_LoadMesh(const char* filename);\r
+-\r
+-\r
+-/*! \brief Merge a Netgen VOL Mesh from disk into an existing mesh in memory\r
+-\r
+- A Netgen mesh saved in the internal VOL format can be merged \r
+- into an existing Netgen Mesh structure using this function. \r
+-\r
+- \param mesh Name of the Mesh structure already existent in memory\r
+- \param filename Pointer to a character array containing the \r
+- name of the file to load\r
+- \return Ng_Result Status of the merge operation\r
+-*/\r
+-DLL_HEADER Ng_Result Ng_MergeMesh(Ng_Mesh * mesh, const char* filename);\r
+-\r
+-\r
+-/*! \brief Merge one Netgen Mesh into another Netgen Mesh in the case \r
+- when both are already in memory\r
+-\r
+- (NOTE: FUNCTION STILL WORK IN PROGRESS!!!)\r
+-\r
+- This function can be used to merge two Netgen meshes already present \r
+- in memory.\r
+-\r
+- \param mesh1 Parent Mesh structure into which the second mesh \r
+- will be merged\r
+- \param mesh2 Child mesh structure which will get merged into \r
+- the parent mesh\r
+- \return Ng_Result Status of the merge operation\r
+-*/\r
+-DLL_HEADER Ng_Result Ng_MergeMesh(Ng_Mesh * mesh1, Ng_Mesh * mesh2);\r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-// ------------------------------------------------------------------\r
+-// Basic Meshing functions for manually adding points, surface elements \r
+-// and volume elements to a Netgen Mesh structure\r
+-\r
+-/*! \brief Add a point to a given Netgen Mesh Structure\r
+-\r
+- This function allows points to be directly added to a Netgen \r
+- mesh structure by providing the co-ordinates.\r
+-\r
+- Each call to the function allows only one point to be added.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param x Pointer to an array of type double containing the co-ordinates \r
+- of the point to be added in the form: \n\r
+- - x[0] = X co-ordinate\r
+- - x[1] = Y co-ordinate\r
+- - x[2] = Z co-ordinate\r
+-*/\r
+-DLL_HEADER void Ng_AddPoint (Ng_Mesh * mesh, double * x);\r
+-\r
+-\r
+-/*! \brief Add a surface element to a given Netgen Mesh Structure\r
+-\r
+- This function allows the top-level code to directly add individual \r
+- Surface Elements to a Netgen Mesh Structure by providing the type of \r
+- element to be added and the indices of the points which constitute the \r
+- element.\r
+-\r
+- <i>Note:</i> \r
+- - The points referred to by the surface elements must have been\r
+- added prior to calling this function. \r
+- - Currently only triangular elements are supported, and the Surface Element \r
+- Type argument is not used.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param et Surface Element type provided via the enumerated type \r
+- #Ng_Surface_Element_Type \r
+- \param pi Pointer to an array of integers containing the indices of the \r
+- points which constitute the surface element being added\r
+-*/\r
+-DLL_HEADER void Ng_AddSurfaceElement (Ng_Mesh * mesh, Ng_Surface_Element_Type et, int * pi);\r
+-\r
+-\r
+-/*! \brief Add a volume element to a given Netgen Mesh Structure\r
+-\r
+- This function allows the top-level code to directly add individual \r
+- Volume Elements to a Netgen Mesh Structure by providing the type of \r
+- element to be added and the indices of the points which constitute the \r
+- element.\r
+-\r
+- <i>Note:</i> \r
+- - The points referred to by the volume elements must have been\r
+- added prior to calling this function. \r
+- - Currently only tetrahedral elements are supported, and the Volume Element \r
+- Type argument is not used.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param et Volume Element type provided via the enumerated type \r
+- #Ng_Volume_Element_Type \r
+- \param pi Pointer to an array of integers containing the indices of the \r
+- points which constitute the volume element being added\r
+-\r
+-*/\r
+-DLL_HEADER void Ng_AddVolumeElement (Ng_Mesh * mesh, Ng_Volume_Element_Type et, int * pi);\r
+- \r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-// ------------------------------------------------------------------\r
+-// Local Mesh Size restriction / limiting utilities\r
+-\r
+-/*! \brief Apply a global restriction on mesh element size\r
+-\r
+- This utility allows the user to apply a global mesh element \r
+- size limitation. \r
+-\r
+- During mesh creation, in the absence of an explicit local \r
+- size restriction around the neighbourhood of a point within \r
+- the meshing domain, this global size restriction will be \r
+- utilised.\r
+-\r
+- <b>Note</b>: This function only limits the <b>Maximum</b> \r
+- size of an element within the mesh.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param h Variable of type <i>double</i>, specifying the maximum\r
+- allowable mesh size\r
+-*/\r
+-DLL_HEADER void Ng_RestrictMeshSizeGlobal (Ng_Mesh * mesh, double h);\r
+-\r
+-\r
+-/*! \brief Locally restrict the mesh element size at the given point\r
+-\r
+- Unlike the function #Ng_RestrictMeshSizeGlobal, this function \r
+- allows the user to locally restrict the maximum allowable mesh \r
+- size at a given point.\r
+-\r
+- The point is specified via its three cartesian co-ordinates.\r
+-\r
+- <b>Note</b>: This function only limits the <b>Maximum</b> size \r
+- of the elements around the specified point.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param p Pointer to an Array of type <i>double</i>, containing \r
+- the three co-ordinates of the point in the form: \n\r
+- - p[0] = X co-ordinate\r
+- - p[1] = Y co-ordinate\r
+- - p[2] = Z co-ordinate\r
+- \param h Variable of type <i>double</i>, specifying the maximum\r
+- allowable mesh size at that point\r
+-*/\r
+-DLL_HEADER void Ng_RestrictMeshSizePoint (Ng_Mesh * mesh, double * p, double h);\r
+-\r
+-\r
+-/*! \brief Locally restrict the mesh element size within a specified box\r
+-\r
+- Similar to the function #Ng_RestrictMeshSizePoint, this function \r
+- allows the size of elements within a mesh to be locally limited.\r
+-\r
+- However, rather than limit the mesh size at a single point, this \r
+- utility restricts the local mesh size within a 3D Box region, specified \r
+- via the co-ordinates of the two diagonally opposite points of a cuboid.\r
+-\r
+- <b>Note</b>: This function only limits the <b>Maximum</b> size \r
+- of the elements within the specified region.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param pmin Pointer to an Array of type <i>double</i>, containing \r
+- the three co-ordinates of the first point of the cuboid: \n\r
+- - pmin[0] = X co-ordinate\r
+- - pmin[1] = Y co-ordinate\r
+- - pmin[2] = Z co-ordinate\r
+- \param pmax Pointer to an Array of type <i>double</i>, containing \r
+- the three co-ordinates of the opposite point of the \r
+- cuboid: \n\r
+- - pmax[0] = X co-ordinate\r
+- - pmax[1] = Y co-ordinate\r
+- - pmax[2] = Z co-ordinate\r
+- \param h Variable of type <i>double</i>, specifying the maximum\r
+- allowable mesh size at that point\r
+-*/\r
+-DLL_HEADER void Ng_RestrictMeshSizeBox (Ng_Mesh * mesh, double * pmin, double * pmax, double h);\r
+-\r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-// ------------------------------------------------------------------\r
+-// 3D Mesh Generation functions\r
+-\r
+-/*! \brief Create a 3D Volume Mesh given a Surface Mesh\r
+-\r
+- After creating a surface mesh, this function can be utilised \r
+- to automatically generate the corresponding 3D Volume Mesh.\r
+-\r
+- Mesh generation parameters (such as grading, maximum element size, \r
+- etc.) are specified via the meshing parameters class which also \r
+- needs to be passed to this function.\r
+-\r
+- <b>Note</b>: Currently, Netgen generates pure tetrahedral volume \r
+- meshes.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \param mp Pointer to a copy of the Meshing Parameters class\r
+- (#Ng_Meshing_Parameters), filled up with the \r
+- required values\r
+-\r
+- \return Ng_Result Status of the Mesh Generation routine. More \r
+- details regarding the return value can be \r
+- found in the description of #Ng_Result\r
+-*/\r
+-DLL_HEADER Ng_Result Ng_GenerateVolumeMesh (Ng_Mesh * mesh, Ng_Meshing_Parameters * mp);\r
+-\r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-// ------------------------------------------------------------------\r
+-// Basic Mesh information functions\r
+-\r
+-/*! \brief Returns the Number of Points present in the specified Mesh\r
+-\r
+- Given an already existent Netgen Mesh Structure, this function \r
+- returns the number of points currently present within the Mesh.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \return \r
+- Integer Data-type with the number of points in the Mesh\r
+-*/\r
+-DLL_HEADER int Ng_GetNP (Ng_Mesh * mesh);\r
+-\r
+-\r
+-/*! \brief Returns the Number of Surface Elements present in the specified Mesh\r
+-\r
+- Given an already existent Netgen Mesh Structure, this function \r
+- returns the number of surface elements currently present within \r
+- the Mesh.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \return \r
+- Integer Data-type with the number of surface elements in the Mesh\r
+-*/\r
+-DLL_HEADER int Ng_GetNSE (Ng_Mesh * mesh);\r
+-\r
+-\r
+-/*! \brief Returns the Number of Volume Elements present in the specified Mesh\r
+-\r
+- Given an already existent Netgen Mesh Structure, this function \r
+- returns the number of volume elements currently present within \r
+- the Mesh.\r
+-\r
+- \param mesh Pointer to an existing Netgen Mesh structure of \r
+- type #Ng_Mesh\r
+- \return \r
+- Integer Data-type with the number of volume elements in the Mesh\r
+-*/\r
+-DLL_HEADER int Ng_GetNE (Ng_Mesh * mesh);\r
+-\r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-// ------------------------------------------------------------------\r
+-// Mesh Topology functions\r
+-// Use these functions to extract points, surface / volume elements, \r
+-// perform topological searches, etc..etc...\r
+- \r
+-// Return the Point Coordinates of a specified Point\r
+-// The x, y and z co-ordinates are returned in the array pointer as \r
+-// x[0] = x ; x[1] = y ; x[2] = z\r
+-DLL_HEADER void Ng_GetPoint (Ng_Mesh * mesh, int num, double * x);\r
+-\r
+-\r
+-\r
+-// return surface and volume element in pi\r
+-DLL_HEADER Ng_Surface_Element_Type \r
+-Ng_GetSurfaceElement (Ng_Mesh * mesh, int num, int * pi);\r
+-\r
+-DLL_HEADER Ng_Volume_Element_Type\r
+-Ng_GetVolumeElement (Ng_Mesh * mesh, int num, int * pi);\r
+-\r
+-// ------------------------------------------------------------------\r
+-\r
+-\r
+-\r
+-\r
+-// **********************************************************\r
+-// ** 2D Meshing **\r
+-// **********************************************************\r
+-\r
+-\r
+-// feeds points and boundary to mesh\r
+-\r
+-DLL_HEADER void Ng_AddPoint_2D (Ng_Mesh * mesh, double * x);\r
+-DLL_HEADER void Ng_AddBoundarySeg_2D (Ng_Mesh * mesh, int pi1, int pi2);\r
+- \r
+-// ask for number of points, elements and boundary segments\r
+-DLL_HEADER int Ng_GetNP_2D (Ng_Mesh * mesh);\r
+-DLL_HEADER int Ng_GetNE_2D (Ng_Mesh * mesh);\r
+-DLL_HEADER int Ng_GetNSeg_2D (Ng_Mesh * mesh);\r
+- \r
+-// return point coordinates\r
+-DLL_HEADER void Ng_GetPoint_2D (Ng_Mesh * mesh, int num, double * x);\r
+-\r
+-// return 2d elements\r
+-DLL_HEADER Ng_Surface_Element_Type \r
+-Ng_GetElement_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum = NULL);\r
+-\r
+-// return 2d boundary segment\r
+-DLL_HEADER void Ng_GetSegment_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum = NULL);\r
+-\r
+-\r
+-// load 2d netgen spline geometry\r
+-DLL_HEADER Ng_Geometry_2D * Ng_LoadGeometry_2D (const char * filename);\r
+-\r
+-// generate 2d mesh, mesh is allocated by function\r
+-DLL_HEADER Ng_Result Ng_GenerateMesh_2D (Ng_Geometry_2D * geom,\r
+- Ng_Mesh ** mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+- \r
+-DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh,\r
+- int levels);\r
+- \r
+-\r
+-\r
+-\r
+-\r
+-// **********************************************************\r
+-// ** STL Meshing **\r
+-// **********************************************************\r
+-\r
+-\r
+-// loads geometry from STL file\r
+-DLL_HEADER Ng_STL_Geometry * Ng_STL_LoadGeometry (const char * filename, int binary = 0);\r
+-\r
+-\r
+-// generate new STL Geometry\r
+-DLL_HEADER Ng_STL_Geometry * Ng_STL_NewGeometry ();\r
+- \r
+-\r
+-// fills STL Geometry\r
+-// positive orientation\r
+-// normal vector may be null-pointer\r
+-DLL_HEADER void Ng_STL_AddTriangle (Ng_STL_Geometry * geom, \r
+- double * p1, double * p2, double * p3, \r
+- double * nv = NULL);\r
+-\r
+-// add (optional) edges :\r
+-DLL_HEADER void Ng_STL_AddEdge (Ng_STL_Geometry * geom, \r
+- double * p1, double * p2);\r
+-\r
+-// after adding triangles (and edges) initialize\r
+-DLL_HEADER Ng_Result Ng_STL_InitSTLGeometry (Ng_STL_Geometry * geom);\r
+-\r
+-// automatically generates edges:\r
+-DLL_HEADER Ng_Result Ng_STL_MakeEdges (Ng_STL_Geometry * geom,\r
+- Ng_Mesh* mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+-\r
+-\r
+-// generates mesh, empty mesh must be already created.\r
+-DLL_HEADER Ng_Result Ng_STL_GenerateSurfaceMesh (Ng_STL_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+-\r
+-\r
+-#ifdef ACIS\r
+-\r
+-// **********************************************************\r
+-// ** ACIS Meshing **\r
+-// **********************************************************\r
+-\r
+-/// Data type for NETGEN STL geomty\r
+-typedef void * Ng_ACIS_Geometry;\r
+-\r
+-// loads geometry from STL file\r
+-DLL_HEADER Ng_ACIS_Geometry * Ng_ACIS_LoadGeometry (const char * filename);\r
+- \r
+-// generates mesh, empty mesh must be already created.\r
+-DLL_HEADER Ng_Result Ng_ACIS_GenerateSurfaceMesh (Ng_ACIS_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+-\r
+-\r
+-#endif\r
+-\r
+-\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-\r
+-// **********************************************************\r
+-// ** OpenCascade Geometry / Meshing Utilities **\r
+-// **********************************************************\r
+-\r
+-// Create new OCC Geometry Object\r
+-DLL_HEADER Ng_OCC_Geometry * Ng_OCC_NewGeometry ();\r
+-\r
+-// Delete an OCC Geometry Object\r
+-DLL_HEADER Ng_Result Ng_OCC_DeleteGeometry (Ng_OCC_Geometry * geom);\r
+-\r
+-// Loads geometry from STEP file\r
+-DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_STEP (const char * filename);\r
+-\r
+-// Loads geometry from IGES file\r
+-DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_IGES (const char * filename);\r
+-\r
+-// Loads geometry from BREP file\r
+-DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_BREP (const char * filename);\r
+-\r
+-// Set the local mesh size based on geometry / topology\r
+-DLL_HEADER Ng_Result Ng_OCC_SetLocalMeshSize (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+-\r
+-// Mesh the edges and add Face descriptors to prepare for surface meshing\r
+-DLL_HEADER Ng_Result Ng_OCC_GenerateEdgeMesh (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp);\r
+-\r
+-// Mesh the surfaces of an OCC geometry\r
+-DLL_HEADER Ng_Result Ng_OCC_GenerateSurfaceMesh (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh,\r
+- Ng_Meshing_Parameters * mp); \r
+-\r
+-// Get the face map of an already loaded OCC geometry\r
+-DLL_HEADER Ng_Result Ng_OCC_GetFMap(Ng_OCC_Geometry * geom, \r
+- Ng_OCC_TopTools_IndexedMapOfShape * FMap);\r
+-\r
+-#endif // OCCGEOMETRY\r
+-\r
+-\r
+-\r
+-// **********************************************************\r
+-// ** Mesh refinement algorithms **\r
+-// **********************************************************\r
+-\r
+-// uniform mesh refinement\r
+-DLL_HEADER void Ng_Uniform_Refinement (Ng_Mesh * mesh);\r
+-\r
+-\r
+-// uniform mesh refinement with geometry adaption:\r
+-\r
+-DLL_HEADER void Ng_2D_Uniform_Refinement (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-DLL_HEADER void Ng_STL_Uniform_Refinement (Ng_STL_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-DLL_HEADER void Ng_CSG_Uniform_Refinement (Ng_CSG_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-DLL_HEADER void Ng_OCC_Uniform_Refinement (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-#endif\r
+-\r
+-\r
+-\r
+-// **********************************************************\r
+-// ** Second Order mesh algorithms **\r
+-// **********************************************************\r
+-\r
+-// convert mesh to second order\r
+-DLL_HEADER void Ng_Generate_SecondOrder (Ng_Mesh * mesh);\r
+-\r
+-\r
+-// convert mesh to second order with geometry adaption:\r
+-\r
+-DLL_HEADER void Ng_2D_Generate_SecondOrder (Ng_Geometry_2D * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-DLL_HEADER void Ng_STL_Generate_SecondOrder (Ng_STL_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-DLL_HEADER void Ng_CSG_Generate_SecondOrder (Ng_CSG_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-\r
+-#ifdef OCCGEOMETRY\r
+-DLL_HEADER void Ng_OCC_Generate_SecondOrder (Ng_OCC_Geometry * geom,\r
+- Ng_Mesh * mesh);\r
+-#endif\r
+-\r
+-\r
+-#endif // NGLIB\r
++#ifndef NGLIB
++#define NGLIB
++
++/**************************************************************************/
++/* File: nglib.h */
++/* Author: Joachim Schoeberl */
++/* Date: 7. May. 2000 */
++/**************************************************************************/
++
++/*!
++ \file nglib.h
++ \brief Library interface to the netgen meshing kernel
++ \author Joachim Schoeberl
++ \date 7. May 2000
++
++ This header file provides access to the core functionality of the Netgen
++ Mesher via a library interface, without an interactive User Interface.
++
++ The intention of providing these set of functions is to allow system
++ developers to integrate Netgen into top-level code, to act as the low
++ level mesh generation / optimisation kernel.
++*/
++
++// Philippose - 14.02.2009
++// Modifications for creating a DLL in Windows
++#ifdef WIN32
++ #if defined NGLIB_EXPORTS || defined nglib_EXPORTS
++ #define DLL_HEADER __declspec(dllexport)
++ #else
++ #define DLL_HEADER __declspec(dllimport)
++ #endif
++#else
++ #define DLL_HEADER
++#endif
++
++
++
++// ** Constants used within Netgen *********************
++/// Maximum allowed number of nodes per volume element
++#define NG_VOLUME_ELEMENT_MAXPOINTS 10
++
++/// Maximum allowed number of nodes per surface element
++#define NG_SURFACE_ELEMENT_MAXPOINTS 8
++
++
++
++// *** Data-types for accessing Netgen functionality ***
++/// Data type for NETGEN mesh
++typedef void * Ng_Mesh;
++
++/// Data type for NETGEN CSG geometry
++typedef void * Ng_CSG_Geometry;
++
++/// Data type for NETGEN 2D geometry
++typedef void * Ng_Geometry_2D;
++
++/// Data type for NETGEN STL geometry
++typedef void * Ng_STL_Geometry;
++
++#ifdef OCCGEOMETRY
++/// Data type for NETGEN OpenCascade geometry
++typedef void * Ng_OCC_Geometry;
++typedef void * Ng_OCC_TopTools_IndexedMapOfShape;
++#endif
++
++
++// *** Special Enum types used within Netgen ***********
++/// Currently implemented surface element types
++enum Ng_Surface_Element_Type
++ { NG_TRIG = 1, NG_QUAD = 2, NG_TRIG6 = 3, NG_QUAD6 = 4, NG_QUAD8 = 5 };
++
++/// Currently implemented volume element types
++enum Ng_Volume_Element_Type
++ { NG_TET = 1, NG_PYRAMID = 2, NG_PRISM = 3, NG_TET10 = 4 };
++
++/// Values returned by Netgen functions
++enum Ng_Result
++ {
++ NG_ERROR = -1,
++ NG_OK = 0,
++ NG_SURFACE_INPUT_ERROR = 1,
++ NG_VOLUME_FAILURE = 2,
++ NG_STL_INPUT_ERROR = 3,
++ NG_SURFACE_FAILURE = 4,
++ NG_FILE_NOT_FOUND = 5
++ };
++
++
++
++// *** Classes required for use within Netgen **********
++/// Netgen Meshing Parameters class
++class Ng_Meshing_Parameters
++{
++public:
++ int uselocalh; //!< Switch to enable / disable usage of local mesh size modifiers
++
++ double maxh; //!< Maximum global mesh size allowed
++ double minh; //!< Minimum global mesh size allowed
++
++ double fineness; //!< Mesh density: 0...1 (0 => coarse; 1 => fine)
++ double grading; //!< Mesh grading: 0...1 (0 => uniform mesh; 1 => aggressive local grading)
++
++ double elementsperedge; //!< Number of elements to generate per edge of the geometry
++ double elementspercurve; //!< Elements to generate per curvature radius
++
++ int closeedgeenable; //!< Enable / Disable mesh refinement at close edges
++ double closeedgefact; //!< Factor to use for refinement at close edges (larger => finer)
++
++ int minedgelenenable; //!< Enable / Disable user defined minimum edge length for edge subdivision
++ double minedgelen; //!< Minimum edge length to use while subdividing the edges (default = 1e-4)
++
++ int second_order; //!< Generate second-order surface and volume elements
++ int quad_dominated; //!< Creates a Quad-dominated mesh
++
++ char * meshsize_filename; //!< Optional external mesh size file
++
++ int optsurfmeshenable; //!< Enable / Disable automatic surface mesh optimization
++ int optvolmeshenable; //!< Enable / Disable automatic volume mesh optimization
++
++ int optsteps_3d; //!< Number of optimize steps to use for 3-D mesh optimization
++ int optsteps_2d; //!< Number of optimize steps to use for 2-D mesh optimization
++
++ // Philippose - 13/09/2010
++ // Added a couple more parameters into the meshing parameters list
++ // from Netgen into Nglib
++ int invert_tets; //!< Invert all the volume elements
++ int invert_trigs; //!< Invert all the surface triangle elements
++
++ int check_overlap; //!< Check for overlapping surfaces during Surface meshing
++ int check_overlapping_boundary; //!< Check for overlapping surface elements before volume meshing
++
++
++ /*!
++ Default constructor for the Mesh Parameters class
++
++ Note: This constructor initialises the variables in the
++ class with the following default values
++ - #uselocalh: 1
++ - #maxh: 1000.0
++ - #fineness: 0.5
++ - #grading: 0.3
++ - #elementsperedge: 2.0
++ - #elementspercurve: 2.0
++ - #closeedgeenable: 0
++ - #closeedgefact: 2.0
++ - #secondorder: 0
++ - #meshsize_filename: null
++ - #quad_dominated: 0
++ - #optsurfmeshenable: 1
++ - #optvolmeshenable: 1
++ - #optsteps_2d: 3
++ - #optsteps_3d: 3
++ - #invert_tets: 0
++ - #invert_trigs:0
++ - #check_overlap: 1
++ - #check_overlapping_boundary: 1
++ */
++ DLL_HEADER Ng_Meshing_Parameters();
++
++
++
++ /*!
++ Reset the meshing parameters to their defaults
++
++ This member function resets all the meshing parameters
++ of the object to the default values
++ */
++ DLL_HEADER void Reset_Parameters();
++
++
++
++ /*!
++ Transfer local meshing parameters to internal meshing parameters
++
++ This member function transfers all the meshing parameters
++ defined in the local meshing parameters structure of nglib into
++ the internal meshing parameters structure used by the Netgen core
++ */
++ DLL_HEADER void Transfer_Parameters();
++};
++
++
++
++
++// *** Functions Exported by this Library *************
++
++// ------------------------------------------------------------------
++// Netgen library initialisation / destruction functions
++
++/*! \brief Initialise the Netgen library and prepare for use
++
++ This function needs to be called by the third-party
++ program before beginning to use the other Netgen
++ specific functions.
++*/
++DLL_HEADER void Ng_Init ();
++
++
++/*! \brief Exit the Netgen meshing kernel in a clean manner
++
++ Use this function to exit the meshing sub-system in
++ a clean and orderly manner.
++*/
++DLL_HEADER void Ng_Exit ();
++
++
++/*! \brief Create a new (and empty) Netgen Mesh Structure
++
++ This function creates a new Netgen Mesh, initialises
++ it, and returns a pointer to the created mesh structure.
++
++ Use the returned pointer for subsequent operations
++ which involve mesh operations.
++
++ \return Ng_Mesh Pointer to a Netgen Mesh type #Ng_Mesh
++*/
++DLL_HEADER Ng_Mesh * Ng_NewMesh ();
++
++
++/*! \brief Delete an existing Netgen Mesh Structure
++
++ Use this function to delete an existing Netgen mesh
++ structure and release the used memory.
++
++ \param mesh Pointer to an existing Netgen Mesh structure
++ of type #Ng_Mesh
++*/
++DLL_HEADER void Ng_DeleteMesh (Ng_Mesh * mesh);
++
++
++/*! \brief Save a Netgen Mesh to disk
++
++ This function allows a generated mesh structure to be saved
++ to disk.
++
++ A Mesh saved using this function, will be written to disk
++ in the Netgen VOL file format.
++
++ \param mesh Pointer to an existing Netgen Mesh structure
++ of type #Ng_Mesh
++ \param filename Pointer to a character array containing the
++ name of the file to which the mesh should
++ be saved
++*/
++DLL_HEADER void Ng_SaveMesh(Ng_Mesh * mesh, const char* filename);
++
++
++/*! \brief Load a Netgen VOL Mesh from disk into memory
++
++ A Netgen mesh saved in the internal VOL format can be loaded
++ into a Netgen Mesh structure using this function.
++
++ \param filename Pointer to a character array containing the
++ name of the file to load
++ \return Ng_Mesh Pointer to a Netgen Mesh type #Ng_Mesh containing
++ the mesh loaded from disk
++*/
++DLL_HEADER Ng_Mesh * Ng_LoadMesh(const char* filename);
++
++
++/*! \brief Merge a Netgen VOL Mesh from disk into an existing mesh in memory
++
++ A Netgen mesh saved in the internal VOL format can be merged
++ into an existing Netgen Mesh structure using this function.
++
++ \param mesh Name of the Mesh structure already existent in memory
++ \param filename Pointer to a character array containing the
++ name of the file to load
++ \return Ng_Result Status of the merge operation
++*/
++DLL_HEADER Ng_Result Ng_MergeMesh(Ng_Mesh * mesh, const char* filename);
++
++
++/*! \brief Merge one Netgen Mesh into another Netgen Mesh in the case
++ when both are already in memory
++
++ (NOTE: FUNCTION STILL WORK IN PROGRESS!!!)
++
++ This function can be used to merge two Netgen meshes already present
++ in memory.
++
++ \param mesh1 Parent Mesh structure into which the second mesh
++ will be merged
++ \param mesh2 Child mesh structure which will get merged into
++ the parent mesh
++ \return Ng_Result Status of the merge operation
++*/
++DLL_HEADER Ng_Result Ng_MergeMesh(Ng_Mesh * mesh1, Ng_Mesh * mesh2);
++// ------------------------------------------------------------------
++
++
++
++// ------------------------------------------------------------------
++// Basic Meshing functions for manually adding points, surface elements
++// and volume elements to a Netgen Mesh structure
++
++/*! \brief Add a point to a given Netgen Mesh Structure
++
++ This function allows points to be directly added to a Netgen
++ mesh structure by providing the co-ordinates.
++
++ Each call to the function allows only one point to be added.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param x Pointer to an array of type double containing the co-ordinates
++ of the point to be added in the form: \n
++ - x[0] = X co-ordinate
++ - x[1] = Y co-ordinate
++ - x[2] = Z co-ordinate
++*/
++DLL_HEADER void Ng_AddPoint (Ng_Mesh * mesh, double * x);
++
++
++/*! \brief Add a surface element to a given Netgen Mesh Structure
++
++ This function allows the top-level code to directly add individual
++ Surface Elements to a Netgen Mesh Structure by providing the type of
++ element to be added and the indices of the points which constitute the
++ element.
++
++ <i>Note:</i>
++ - The points referred to by the surface elements must have been
++ added prior to calling this function.
++ - Currently only triangular elements are supported, and the Surface Element
++ Type argument is not used.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param et Surface Element type provided via the enumerated type
++ #Ng_Surface_Element_Type
++ \param pi Pointer to an array of integers containing the indices of the
++ points which constitute the surface element being added
++*/
++DLL_HEADER void Ng_AddSurfaceElement (Ng_Mesh * mesh, Ng_Surface_Element_Type et, int * pi);
++
++
++/*! \brief Add a volume element to a given Netgen Mesh Structure
++
++ This function allows the top-level code to directly add individual
++ Volume Elements to a Netgen Mesh Structure by providing the type of
++ element to be added and the indices of the points which constitute the
++ element.
++
++ <i>Note:</i>
++ - The points referred to by the volume elements must have been
++ added prior to calling this function.
++ - Currently only tetrahedral elements are supported, and the Volume Element
++ Type argument is not used.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param et Volume Element type provided via the enumerated type
++ #Ng_Volume_Element_Type
++ \param pi Pointer to an array of integers containing the indices of the
++ points which constitute the volume element being added
++
++*/
++DLL_HEADER void Ng_AddVolumeElement (Ng_Mesh * mesh, Ng_Volume_Element_Type et, int * pi);
++
++// ------------------------------------------------------------------
++
++
++
++// ------------------------------------------------------------------
++// Local Mesh Size restriction / limiting utilities
++
++/*! \brief Apply a global restriction on mesh element size
++
++ This utility allows the user to apply a global mesh element
++ size limitation.
++
++ During mesh creation, in the absence of an explicit local
++ size restriction around the neighbourhood of a point within
++ the meshing domain, this global size restriction will be
++ utilised.
++
++ <b>Note</b>: This function only limits the <b>Maximum</b>
++ size of an element within the mesh.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param h Variable of type <i>double</i>, specifying the maximum
++ allowable mesh size
++*/
++DLL_HEADER void Ng_RestrictMeshSizeGlobal (Ng_Mesh * mesh, double h);
++
++
++/*! \brief Locally restrict the mesh element size at the given point
++
++ Unlike the function #Ng_RestrictMeshSizeGlobal, this function
++ allows the user to locally restrict the maximum allowable mesh
++ size at a given point.
++
++ The point is specified via its three cartesian co-ordinates.
++
++ <b>Note</b>: This function only limits the <b>Maximum</b> size
++ of the elements around the specified point.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param p Pointer to an Array of type <i>double</i>, containing
++ the three co-ordinates of the point in the form: \n
++ - p[0] = X co-ordinate
++ - p[1] = Y co-ordinate
++ - p[2] = Z co-ordinate
++ \param h Variable of type <i>double</i>, specifying the maximum
++ allowable mesh size at that point
++*/
++DLL_HEADER void Ng_RestrictMeshSizePoint (Ng_Mesh * mesh, double * p, double h);
++
++
++/*! \brief Locally restrict the mesh element size within a specified box
++
++ Similar to the function #Ng_RestrictMeshSizePoint, this function
++ allows the size of elements within a mesh to be locally limited.
++
++ However, rather than limit the mesh size at a single point, this
++ utility restricts the local mesh size within a 3D Box region, specified
++ via the co-ordinates of the two diagonally opposite points of a cuboid.
++
++ <b>Note</b>: This function only limits the <b>Maximum</b> size
++ of the elements within the specified region.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param pmin Pointer to an Array of type <i>double</i>, containing
++ the three co-ordinates of the first point of the cuboid: \n
++ - pmin[0] = X co-ordinate
++ - pmin[1] = Y co-ordinate
++ - pmin[2] = Z co-ordinate
++ \param pmax Pointer to an Array of type <i>double</i>, containing
++ the three co-ordinates of the opposite point of the
++ cuboid: \n
++ - pmax[0] = X co-ordinate
++ - pmax[1] = Y co-ordinate
++ - pmax[2] = Z co-ordinate
++ \param h Variable of type <i>double</i>, specifying the maximum
++ allowable mesh size at that point
++*/
++DLL_HEADER void Ng_RestrictMeshSizeBox (Ng_Mesh * mesh, double * pmin, double * pmax, double h);
++
++// ------------------------------------------------------------------
++
++
++
++// ------------------------------------------------------------------
++// 3D Mesh Generation functions
++
++/*! \brief Create a 3D Volume Mesh given a Surface Mesh
++
++ After creating a surface mesh, this function can be utilised
++ to automatically generate the corresponding 3D Volume Mesh.
++
++ Mesh generation parameters (such as grading, maximum element size,
++ etc.) are specified via the meshing parameters class which also
++ needs to be passed to this function.
++
++ <b>Note</b>: Currently, Netgen generates pure tetrahedral volume
++ meshes.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \param mp Pointer to a copy of the Meshing Parameters class
++ (#Ng_Meshing_Parameters), filled up with the
++ required values
++
++ \return Ng_Result Status of the Mesh Generation routine. More
++ details regarding the return value can be
++ found in the description of #Ng_Result
++*/
++DLL_HEADER Ng_Result Ng_GenerateVolumeMesh (Ng_Mesh * mesh, Ng_Meshing_Parameters * mp);
++
++// ------------------------------------------------------------------
++
++
++
++// ------------------------------------------------------------------
++// Basic Mesh information functions
++
++/*! \brief Returns the Number of Points present in the specified Mesh
++
++ Given an already existent Netgen Mesh Structure, this function
++ returns the number of points currently present within the Mesh.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \return
++ Integer Data-type with the number of points in the Mesh
++*/
++DLL_HEADER int Ng_GetNP (Ng_Mesh * mesh);
++
++
++/*! \brief Returns the Number of Surface Elements present in the specified Mesh
++
++ Given an already existent Netgen Mesh Structure, this function
++ returns the number of surface elements currently present within
++ the Mesh.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \return
++ Integer Data-type with the number of surface elements in the Mesh
++*/
++DLL_HEADER int Ng_GetNSE (Ng_Mesh * mesh);
++
++
++/*! \brief Returns the Number of Volume Elements present in the specified Mesh
++
++ Given an already existent Netgen Mesh Structure, this function
++ returns the number of volume elements currently present within
++ the Mesh.
++
++ \param mesh Pointer to an existing Netgen Mesh structure of
++ type #Ng_Mesh
++ \return
++ Integer Data-type with the number of volume elements in the Mesh
++*/
++DLL_HEADER int Ng_GetNE (Ng_Mesh * mesh);
++
++// ------------------------------------------------------------------
++
++
++
++// ------------------------------------------------------------------
++// Mesh Topology functions
++// Use these functions to extract points, surface / volume elements,
++// perform topological searches, etc..etc...
++
++// Return the Point Coordinates of a specified Point
++// The x, y and z co-ordinates are returned in the array pointer as
++// x[0] = x ; x[1] = y ; x[2] = z
++DLL_HEADER void Ng_GetPoint (Ng_Mesh * mesh, int num, double * x);
++
++
++
++// return surface and volume element in pi
++DLL_HEADER Ng_Surface_Element_Type
++Ng_GetSurfaceElement (Ng_Mesh * mesh, int num, int * pi);
++
++DLL_HEADER Ng_Volume_Element_Type
++Ng_GetVolumeElement (Ng_Mesh * mesh, int num, int * pi);
++
++// ------------------------------------------------------------------
++
++
++
++
++// **********************************************************
++// ** 2D Meshing **
++// **********************************************************
++
++
++// feeds points and boundary to mesh
++
++DLL_HEADER void Ng_AddPoint_2D (Ng_Mesh * mesh, double * x);
++DLL_HEADER void Ng_AddBoundarySeg_2D (Ng_Mesh * mesh, int pi1, int pi2);
++
++// ask for number of points, elements and boundary segments
++DLL_HEADER int Ng_GetNP_2D (Ng_Mesh * mesh);
++DLL_HEADER int Ng_GetNE_2D (Ng_Mesh * mesh);
++DLL_HEADER int Ng_GetNSeg_2D (Ng_Mesh * mesh);
++
++// return point coordinates
++DLL_HEADER void Ng_GetPoint_2D (Ng_Mesh * mesh, int num, double * x);
++
++// return 2d elements
++DLL_HEADER Ng_Surface_Element_Type
++Ng_GetElement_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum = NULL);
++
++// return 2d boundary segment
++DLL_HEADER void Ng_GetSegment_2D (Ng_Mesh * mesh, int num, int * pi, int * matnum = NULL);
++
++
++// load 2d netgen spline geometry
++DLL_HEADER Ng_Geometry_2D * Ng_LoadGeometry_2D (const char * filename);
++
++// generate 2d mesh, mesh is allocated by function
++DLL_HEADER Ng_Result Ng_GenerateMesh_2D (Ng_Geometry_2D * geom,
++ Ng_Mesh ** mesh,
++ Ng_Meshing_Parameters * mp);
++
++DLL_HEADER void Ng_HP_Refinement (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh,
++ int levels);
++
++
++
++
++
++// **********************************************************
++// ** STL Meshing **
++// **********************************************************
++
++
++// loads geometry from STL file
++DLL_HEADER Ng_STL_Geometry * Ng_STL_LoadGeometry (const char * filename, int binary = 0);
++
++
++// generate new STL Geometry
++DLL_HEADER Ng_STL_Geometry * Ng_STL_NewGeometry ();
++
++
++// fills STL Geometry
++// positive orientation
++// normal vector may be null-pointer
++DLL_HEADER void Ng_STL_AddTriangle (Ng_STL_Geometry * geom,
++ double * p1, double * p2, double * p3,
++ double * nv = NULL);
++
++// add (optional) edges :
++DLL_HEADER void Ng_STL_AddEdge (Ng_STL_Geometry * geom,
++ double * p1, double * p2);
++
++// after adding triangles (and edges) initialize
++DLL_HEADER Ng_Result Ng_STL_InitSTLGeometry (Ng_STL_Geometry * geom);
++
++// automatically generates edges:
++DLL_HEADER Ng_Result Ng_STL_MakeEdges (Ng_STL_Geometry * geom,
++ Ng_Mesh* mesh,
++ Ng_Meshing_Parameters * mp);
++
++
++// generates mesh, empty mesh must be already created.
++DLL_HEADER Ng_Result Ng_STL_GenerateSurfaceMesh (Ng_STL_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp);
++
++
++#ifdef ACIS
++
++// **********************************************************
++// ** ACIS Meshing **
++// **********************************************************
++
++/// Data type for NETGEN STL geomty
++typedef void * Ng_ACIS_Geometry;
++
++// loads geometry from STL file
++DLL_HEADER Ng_ACIS_Geometry * Ng_ACIS_LoadGeometry (const char * filename);
++
++// generates mesh, empty mesh must be already created.
++DLL_HEADER Ng_Result Ng_ACIS_GenerateSurfaceMesh (Ng_ACIS_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp);
++
++
++#endif
++
++
++
++#ifdef OCCGEOMETRY
++
++// **********************************************************
++// ** OpenCascade Geometry / Meshing Utilities **
++// **********************************************************
++
++// Create new OCC Geometry Object
++DLL_HEADER Ng_OCC_Geometry * Ng_OCC_NewGeometry ();
++
++// Delete an OCC Geometry Object
++DLL_HEADER Ng_Result Ng_OCC_DeleteGeometry (Ng_OCC_Geometry * geom);
++
++// Loads geometry from STEP file
++DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_STEP (const char * filename);
++
++// Loads geometry from IGES file
++DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_IGES (const char * filename);
++
++// Loads geometry from BREP file
++DLL_HEADER Ng_OCC_Geometry * Ng_OCC_Load_BREP (const char * filename);
++
++// Set the local mesh size based on geometry / topology
++DLL_HEADER Ng_Result Ng_OCC_SetLocalMeshSize (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp);
++
++// Mesh the edges and add Face descriptors to prepare for surface meshing
++DLL_HEADER Ng_Result Ng_OCC_GenerateEdgeMesh (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp);
++
++// Mesh the surfaces of an OCC geometry
++DLL_HEADER Ng_Result Ng_OCC_GenerateSurfaceMesh (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh,
++ Ng_Meshing_Parameters * mp);
++
++// Get the face map of an already loaded OCC geometry
++DLL_HEADER Ng_Result Ng_OCC_GetFMap(Ng_OCC_Geometry * geom,
++ Ng_OCC_TopTools_IndexedMapOfShape * FMap);
++
++#endif // OCCGEOMETRY
++
++
++
++// **********************************************************
++// ** Mesh refinement algorithms **
++// **********************************************************
++
++// uniform mesh refinement
++DLL_HEADER void Ng_Uniform_Refinement (Ng_Mesh * mesh);
++
++
++// uniform mesh refinement with geometry adaption:
++
++DLL_HEADER void Ng_2D_Uniform_Refinement (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh);
++
++DLL_HEADER void Ng_STL_Uniform_Refinement (Ng_STL_Geometry * geom,
++ Ng_Mesh * mesh);
++
++DLL_HEADER void Ng_CSG_Uniform_Refinement (Ng_CSG_Geometry * geom,
++ Ng_Mesh * mesh);
++
++#ifdef OCCGEOMETRY
++DLL_HEADER void Ng_OCC_Uniform_Refinement (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh);
++#endif
++
++
++
++// **********************************************************
++// ** Second Order mesh algorithms **
++// **********************************************************
++
++// convert mesh to second order
++DLL_HEADER void Ng_Generate_SecondOrder (Ng_Mesh * mesh);
++
++
++// convert mesh to second order with geometry adaption:
++
++DLL_HEADER void Ng_2D_Generate_SecondOrder (Ng_Geometry_2D * geom,
++ Ng_Mesh * mesh);
++
++DLL_HEADER void Ng_STL_Generate_SecondOrder (Ng_STL_Geometry * geom,
++ Ng_Mesh * mesh);
++
++DLL_HEADER void Ng_CSG_Generate_SecondOrder (Ng_CSG_Geometry * geom,
++ Ng_Mesh * mesh);
++
++#ifdef OCCGEOMETRY
++DLL_HEADER void Ng_OCC_Generate_SecondOrder (Ng_OCC_Geometry * geom,
++ Ng_Mesh * mesh);
++#endif
++
++
++#endif // NGLIB
+diff -Naur netgen-5.3.1_SRC_orig/tutorials/frame.step netgen-5.3.1_SRC_modif/tutorials/frame.step
+--- netgen-5.3.1_SRC_orig/tutorials/frame.step 2014-08-29 13:53:58.000000000 +0400
++++ netgen-5.3.1_SRC_modif/tutorials/frame.step 2019-11-14 16:56:25.702360052 +0300
+@@ -1,11683 +1,11683 @@
+-ISO-10303-21;\r
+-HEADER;\r
+-FILE_DESCRIPTION((''),'2;1');\r
+-FILE_NAME('PROESOURCE','2002-11-04T',('user-01'),(''),\r
+-'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2002060',\r
+-'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2002060','');\r
+-FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));\r
+-ENDSEC;\r
+-DATA;\r
+-#1=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2=VECTOR('',#1,1.693725393319E1);\r
+-#3=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));\r
+-#4=LINE('',#3,#2);\r
+-#5=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6=VECTOR('',#5,9.E0);\r
+-#7=CARTESIAN_POINT('',(1.65E1,0.E0,2.5E0));\r
+-#8=LINE('',#7,#6);\r
+-#9=CARTESIAN_POINT('',(1.8E1,0.E0,3.075E1));\r
+-#10=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#12=AXIS2_PLACEMENT_3D('',#9,#10,#11);\r
+-#14=CARTESIAN_POINT('',(1.8E1,0.E0,3.075E1));\r
+-#15=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#16=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#17=AXIS2_PLACEMENT_3D('',#14,#15,#16);\r
+-#19=CARTESIAN_POINT('',(1.8E1,0.E0,1.25E0));\r
+-#20=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#21=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#22=AXIS2_PLACEMENT_3D('',#19,#20,#21);\r
+-#24=CARTESIAN_POINT('',(1.8E1,0.E0,1.25E0));\r
+-#25=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#26=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#27=AXIS2_PLACEMENT_3D('',#24,#25,#26);\r
+-#29=CARTESIAN_POINT('',(1.2E1,0.E0,3.075E1));\r
+-#30=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#31=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#32=AXIS2_PLACEMENT_3D('',#29,#30,#31);\r
+-#34=CARTESIAN_POINT('',(1.2E1,0.E0,3.075E1));\r
+-#35=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#36=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#37=AXIS2_PLACEMENT_3D('',#34,#35,#36);\r
+-#39=CARTESIAN_POINT('',(6.E0,0.E0,3.075E1));\r
+-#40=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#41=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#42=AXIS2_PLACEMENT_3D('',#39,#40,#41);\r
+-#44=CARTESIAN_POINT('',(6.E0,0.E0,3.075E1));\r
+-#45=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#46=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#47=AXIS2_PLACEMENT_3D('',#44,#45,#46);\r
+-#49=CARTESIAN_POINT('',(1.2E1,0.E0,1.25E0));\r
+-#50=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#51=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#52=AXIS2_PLACEMENT_3D('',#49,#50,#51);\r
+-#54=CARTESIAN_POINT('',(1.2E1,0.E0,1.25E0));\r
+-#55=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#56=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#57=AXIS2_PLACEMENT_3D('',#54,#55,#56);\r
+-#59=CARTESIAN_POINT('',(2.2875E1,0.E0,2.4E1));\r
+-#60=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#61=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#62=AXIS2_PLACEMENT_3D('',#59,#60,#61);\r
+-#64=CARTESIAN_POINT('',(2.2875E1,0.E0,2.4E1));\r
+-#65=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#66=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#67=AXIS2_PLACEMENT_3D('',#64,#65,#66);\r
+-#69=CARTESIAN_POINT('',(2.2875E1,0.E0,1.8E1));\r
+-#70=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#71=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#72=AXIS2_PLACEMENT_3D('',#69,#70,#71);\r
+-#74=CARTESIAN_POINT('',(2.2875E1,0.E0,1.8E1));\r
+-#75=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#76=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#77=AXIS2_PLACEMENT_3D('',#74,#75,#76);\r
+-#79=CARTESIAN_POINT('',(2.2875E1,0.E0,1.2E1));\r
+-#80=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#81=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#82=AXIS2_PLACEMENT_3D('',#79,#80,#81);\r
+-#84=CARTESIAN_POINT('',(2.2875E1,0.E0,1.2E1));\r
+-#85=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#86=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#87=AXIS2_PLACEMENT_3D('',#84,#85,#86);\r
+-#89=CARTESIAN_POINT('',(2.2875E1,0.E0,6.E0));\r
+-#90=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#91=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#92=AXIS2_PLACEMENT_3D('',#89,#90,#91);\r
+-#94=CARTESIAN_POINT('',(2.2875E1,0.E0,6.E0));\r
+-#95=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#96=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#97=AXIS2_PLACEMENT_3D('',#94,#95,#96);\r
+-#99=CARTESIAN_POINT('',(1.125E0,0.E0,2.4E1));\r
+-#100=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#101=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#102=AXIS2_PLACEMENT_3D('',#99,#100,#101);\r
+-#104=CARTESIAN_POINT('',(1.125E0,0.E0,2.4E1));\r
+-#105=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#106=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#107=AXIS2_PLACEMENT_3D('',#104,#105,#106);\r
+-#109=CARTESIAN_POINT('',(1.125E0,0.E0,1.8E1));\r
+-#110=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#111=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#112=AXIS2_PLACEMENT_3D('',#109,#110,#111);\r
+-#114=CARTESIAN_POINT('',(1.125E0,0.E0,1.8E1));\r
+-#115=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#116=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#117=AXIS2_PLACEMENT_3D('',#114,#115,#116);\r
+-#119=CARTESIAN_POINT('',(1.125E0,0.E0,1.2E1));\r
+-#120=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#121=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#122=AXIS2_PLACEMENT_3D('',#119,#120,#121);\r
+-#124=CARTESIAN_POINT('',(1.125E0,0.E0,1.2E1));\r
+-#125=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#126=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#127=AXIS2_PLACEMENT_3D('',#124,#125,#126);\r
+-#129=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#130=VECTOR('',#129,1.E0);\r
+-#131=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));\r
+-#132=LINE('',#131,#130);\r
+-#133=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#134=VECTOR('',#133,3.E0);\r
+-#135=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));\r
+-#136=LINE('',#135,#134);\r
+-#137=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#138=VECTOR('',#137,1.6E1);\r
+-#139=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));\r
+-#140=LINE('',#139,#138);\r
+-#141=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#142=VECTOR('',#141,3.E0);\r
+-#143=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));\r
+-#144=LINE('',#143,#142);\r
+-#145=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#146=VECTOR('',#145,1.E0);\r
+-#147=CARTESIAN_POINT('',(-1.E0,0.E0,8.E0));\r
+-#148=LINE('',#147,#146);\r
+-#149=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#150=VECTOR('',#149,3.75E0);\r
+-#151=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));\r
+-#152=LINE('',#151,#150);\r
+-#153=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#154=VECTOR('',#153,5.E-1);\r
+-#155=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));\r
+-#156=LINE('',#155,#154);\r
+-#157=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#158=VECTOR('',#157,1.475E1);\r
+-#159=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));\r
+-#160=LINE('',#159,#158);\r
+-#161=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#162=VECTOR('',#161,1.6E1);\r
+-#163=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));\r
+-#164=LINE('',#163,#162);\r
+-#165=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#166=VECTOR('',#165,1.475E1);\r
+-#167=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));\r
+-#168=LINE('',#167,#166);\r
+-#169=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#170=VECTOR('',#169,5.E-1);\r
+-#171=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));\r
+-#172=LINE('',#171,#170);\r
+-#173=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#174=VECTOR('',#173,3.75E0);\r
+-#175=CARTESIAN_POINT('',(2.6E1,0.E0,8.E0));\r
+-#176=LINE('',#175,#174);\r
+-#177=CARTESIAN_POINT('',(1.125E0,0.E0,6.E0));\r
+-#178=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#179=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#180=AXIS2_PLACEMENT_3D('',#177,#178,#179);\r
+-#182=CARTESIAN_POINT('',(1.125E0,0.E0,6.E0));\r
+-#183=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#184=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);\r
+-#187=CARTESIAN_POINT('',(6.E0,0.E0,1.25E0));\r
+-#188=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#189=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#190=AXIS2_PLACEMENT_3D('',#187,#188,#189);\r
+-#192=CARTESIAN_POINT('',(6.E0,0.E0,1.25E0));\r
+-#193=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#194=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#195=AXIS2_PLACEMENT_3D('',#192,#193,#194);\r
+-#197=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#198=VECTOR('',#197,1.3E1);\r
+-#199=CARTESIAN_POINT('',(5.5E0,0.E0,1.89375E1));\r
+-#200=LINE('',#199,#198);\r
+-#201=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#202=VECTOR('',#201,2.5625E0);\r
+-#203=CARTESIAN_POINT('',(2.15E1,0.E0,2.45E1));\r
+-#204=LINE('',#203,#202);\r
+-#205=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#206=VECTOR('',#205,9.E0);\r
+-#207=CARTESIAN_POINT('',(7.5E0,0.E0,2.95E1));\r
+-#208=LINE('',#207,#206);\r
+-#209=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#210=VECTOR('',#209,2.5625E0);\r
+-#211=CARTESIAN_POINT('',(2.5E0,0.E0,2.19375E1));\r
+-#212=LINE('',#211,#210);\r
+-#213=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#214=VECTOR('',#213,8.125E-1);\r
+-#215=CARTESIAN_POINT('',(2.15E1,0.E0,1.40625E1));\r
+-#216=LINE('',#215,#214);\r
+-#217=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#218=VECTOR('',#217,1.3E1);\r
+-#219=CARTESIAN_POINT('',(1.85E1,0.E0,1.70625E1));\r
+-#220=LINE('',#219,#218);\r
+-#221=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#222=VECTOR('',#221,8.125E-1);\r
+-#223=CARTESIAN_POINT('',(2.5E0,0.E0,1.325E1));\r
+-#224=LINE('',#223,#222);\r
+-#225=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#226=VECTOR('',#225,1.E0);\r
+-#227=CARTESIAN_POINT('',(3.5E0,0.E0,1.225E1));\r
+-#228=LINE('',#227,#226);\r
+-#229=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#230=VECTOR('',#229,7.5E-1);\r
+-#231=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));\r
+-#232=LINE('',#231,#230);\r
+-#233=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#234=VECTOR('',#233,1.2E1);\r
+-#235=CARTESIAN_POINT('',(6.E0,0.E0,1.E1));\r
+-#236=LINE('',#235,#234);\r
+-#237=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#238=VECTOR('',#237,7.5E-1);\r
+-#239=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));\r
+-#240=LINE('',#239,#238);\r
+-#241=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#242=VECTOR('',#241,1.E0);\r
+-#243=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));\r
+-#244=LINE('',#243,#242);\r
+-#245=CARTESIAN_POINT('',(6.E0,0.E0,9.E0));\r
+-#246=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#247=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#248=AXIS2_PLACEMENT_3D('',#245,#246,#247);\r
+-#250=CARTESIAN_POINT('',(6.E0,0.E0,9.E0));\r
+-#251=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#252=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#253=AXIS2_PLACEMENT_3D('',#250,#251,#252);\r
+-#255=CARTESIAN_POINT('',(1.2E1,0.E0,9.E0));\r
+-#256=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#257=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#258=AXIS2_PLACEMENT_3D('',#255,#256,#257);\r
+-#260=CARTESIAN_POINT('',(1.2E1,0.E0,9.E0));\r
+-#261=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#262=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#263=AXIS2_PLACEMENT_3D('',#260,#261,#262);\r
+-#265=CARTESIAN_POINT('',(1.8E1,0.E0,9.E0));\r
+-#266=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#267=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#268=AXIS2_PLACEMENT_3D('',#265,#266,#267);\r
+-#270=CARTESIAN_POINT('',(1.8E1,0.E0,9.E0));\r
+-#271=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#272=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#273=AXIS2_PLACEMENT_3D('',#270,#271,#272);\r
+-#275=CARTESIAN_POINT('',(6.E0,0.E0,1.8E1));\r
+-#276=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#277=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#278=AXIS2_PLACEMENT_3D('',#275,#276,#277);\r
+-#280=CARTESIAN_POINT('',(6.E0,0.E0,1.8E1));\r
+-#281=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#282=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#283=AXIS2_PLACEMENT_3D('',#280,#281,#282);\r
+-#285=CARTESIAN_POINT('',(1.2E1,0.E0,1.8E1));\r
+-#286=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#287=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#288=AXIS2_PLACEMENT_3D('',#285,#286,#287);\r
+-#290=CARTESIAN_POINT('',(1.2E1,0.E0,1.8E1));\r
+-#291=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#292=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#293=AXIS2_PLACEMENT_3D('',#290,#291,#292);\r
+-#295=CARTESIAN_POINT('',(1.8E1,0.E0,1.8E1));\r
+-#296=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#297=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#298=AXIS2_PLACEMENT_3D('',#295,#296,#297);\r
+-#300=CARTESIAN_POINT('',(1.8E1,0.E0,1.8E1));\r
+-#301=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#302=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#303=AXIS2_PLACEMENT_3D('',#300,#301,#302);\r
+-#305=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#306=VECTOR('',#305,3.E0);\r
+-#307=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));\r
+-#308=LINE('',#307,#306);\r
+-#309=CARTESIAN_POINT('',(1.05E1,0.E0,1.25E0));\r
+-#310=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#311=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#312=AXIS2_PLACEMENT_3D('',#309,#310,#311);\r
+-#314=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#315=VECTOR('',#314,3.E0);\r
+-#316=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));\r
+-#317=LINE('',#316,#315);\r
+-#318=CARTESIAN_POINT('',(7.5E0,0.E0,1.25E0));\r
+-#319=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#320=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#321=AXIS2_PLACEMENT_3D('',#318,#319,#320);\r
+-#323=CARTESIAN_POINT('',(1.61E0,0.E0,4.5E0));\r
+-#324=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#325=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#326=AXIS2_PLACEMENT_3D('',#323,#324,#325);\r
+-#328=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#329=VECTOR('',#328,4.263248410977E0);\r
+-#330=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));\r
+-#331=LINE('',#330,#329);\r
+-#332=CARTESIAN_POINT('',(4.553039342392E0,0.E0,1.645354088550E0));\r
+-#333=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#334=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#335=AXIS2_PLACEMENT_3D('',#332,#333,#334);\r
+-#337=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));\r
+-#338=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#339=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#340=AXIS2_PLACEMENT_3D('',#337,#338,#339);\r
+-#342=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#343=VECTOR('',#342,3.15E-1);\r
+-#344=CARTESIAN_POINT('',(6.9E-1,0.E0,7.815E0));\r
+-#345=LINE('',#344,#343);\r
+-#346=CARTESIAN_POINT('',(1.25125E0,0.E0,7.5E0));\r
+-#347=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#348=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#349=AXIS2_PLACEMENT_3D('',#346,#347,#348);\r
+-#351=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#352=VECTOR('',#351,3.15E-1);\r
+-#353=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));\r
+-#354=LINE('',#353,#352);\r
+-#355=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#356=VECTOR('',#355,7.5E-1);\r
+-#357=CARTESIAN_POINT('',(2.6875E0,0.E0,8.69E0));\r
+-#358=LINE('',#357,#356);\r
+-#359=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#360=VECTOR('',#359,8.1E-1);\r
+-#361=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));\r
+-#362=LINE('',#361,#360);\r
+-#363=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#364=VECTOR('',#363,3.875E0);\r
+-#365=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));\r
+-#366=LINE('',#365,#364);\r
+-#367=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#368=VECTOR('',#367,8.1E-1);\r
+-#369=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));\r
+-#370=LINE('',#369,#368);\r
+-#371=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#372=VECTOR('',#371,2.525E-1);\r
+-#373=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));\r
+-#374=LINE('',#373,#372);\r
+-#375=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#376=VECTOR('',#375,3.E0);\r
+-#377=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));\r
+-#378=LINE('',#377,#376);\r
+-#379=CARTESIAN_POINT('',(1.25E0,0.E0,1.35E1));\r
+-#380=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#381=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#382=AXIS2_PLACEMENT_3D('',#379,#380,#381);\r
+-#384=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#385=VECTOR('',#384,3.E0);\r
+-#386=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));\r
+-#387=LINE('',#386,#385);\r
+-#388=CARTESIAN_POINT('',(1.25E0,0.E0,1.65E1));\r
+-#389=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#390=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#391=AXIS2_PLACEMENT_3D('',#388,#389,#390);\r
+-#393=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#394=VECTOR('',#393,3.E0);\r
+-#395=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));\r
+-#396=LINE('',#395,#394);\r
+-#397=CARTESIAN_POINT('',(1.25E0,0.E0,1.95E1));\r
+-#398=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#399=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#400=AXIS2_PLACEMENT_3D('',#397,#398,#399);\r
+-#402=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#403=VECTOR('',#402,3.E0);\r
+-#404=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));\r
+-#405=LINE('',#404,#403);\r
+-#406=CARTESIAN_POINT('',(1.25E0,0.E0,2.25E1));\r
+-#407=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#408=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#409=AXIS2_PLACEMENT_3D('',#406,#407,#408);\r
+-#411=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#412=VECTOR('',#411,3.E0);\r
+-#413=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));\r
+-#414=LINE('',#413,#412);\r
+-#415=CARTESIAN_POINT('',(1.05E1,0.E0,9.E0));\r
+-#416=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#417=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#418=AXIS2_PLACEMENT_3D('',#415,#416,#417);\r
+-#420=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#421=VECTOR('',#420,3.E0);\r
+-#422=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));\r
+-#423=LINE('',#422,#421);\r
+-#424=CARTESIAN_POINT('',(7.5E0,0.E0,9.E0));\r
+-#425=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#426=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#427=AXIS2_PLACEMENT_3D('',#424,#425,#426);\r
+-#429=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#430=VECTOR('',#429,3.E0);\r
+-#431=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));\r
+-#432=LINE('',#431,#430);\r
+-#433=CARTESIAN_POINT('',(1.05E1,0.E0,1.8E1));\r
+-#434=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#435=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#436=AXIS2_PLACEMENT_3D('',#433,#434,#435);\r
+-#438=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#439=VECTOR('',#438,3.E0);\r
+-#440=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));\r
+-#441=LINE('',#440,#439);\r
+-#442=CARTESIAN_POINT('',(7.5E0,0.E0,1.8E1));\r
+-#443=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#444=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#445=AXIS2_PLACEMENT_3D('',#442,#443,#444);\r
+-#447=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#448=VECTOR('',#447,3.E0);\r
+-#449=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));\r
+-#450=LINE('',#449,#448);\r
+-#451=CARTESIAN_POINT('',(7.5E0,0.E0,3.075E1));\r
+-#452=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#453=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#454=AXIS2_PLACEMENT_3D('',#451,#452,#453);\r
+-#456=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#457=VECTOR('',#456,3.E0);\r
+-#458=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));\r
+-#459=LINE('',#458,#457);\r
+-#460=CARTESIAN_POINT('',(1.05E1,0.E0,3.075E1));\r
+-#461=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#462=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#463=AXIS2_PLACEMENT_3D('',#460,#461,#462);\r
+-#465=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#466=VECTOR('',#465,3.E0);\r
+-#467=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));\r
+-#468=LINE('',#467,#466);\r
+-#469=CARTESIAN_POINT('',(1.65E1,0.E0,1.25E0));\r
+-#470=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#471=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#472=AXIS2_PLACEMENT_3D('',#469,#470,#471);\r
+-#474=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#475=VECTOR('',#474,3.E0);\r
+-#476=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));\r
+-#477=LINE('',#476,#475);\r
+-#478=CARTESIAN_POINT('',(1.35E1,0.E0,1.25E0));\r
+-#479=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#480=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#481=AXIS2_PLACEMENT_3D('',#478,#479,#480);\r
+-#483=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#484=VECTOR('',#483,3.E0);\r
+-#485=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));\r
+-#486=LINE('',#485,#484);\r
+-#487=CARTESIAN_POINT('',(2.275E1,0.E0,1.65E1));\r
+-#488=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#489=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#490=AXIS2_PLACEMENT_3D('',#487,#488,#489);\r
+-#492=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#493=VECTOR('',#492,3.E0);\r
+-#494=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));\r
+-#495=LINE('',#494,#493);\r
+-#496=CARTESIAN_POINT('',(2.275E1,0.E0,1.35E1));\r
+-#497=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#498=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#499=AXIS2_PLACEMENT_3D('',#496,#497,#498);\r
+-#501=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#502=VECTOR('',#501,3.E0);\r
+-#503=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));\r
+-#504=LINE('',#503,#502);\r
+-#505=CARTESIAN_POINT('',(2.275E1,0.E0,2.25E1));\r
+-#506=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#507=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#508=AXIS2_PLACEMENT_3D('',#505,#506,#507);\r
+-#510=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#511=VECTOR('',#510,3.E0);\r
+-#512=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));\r
+-#513=LINE('',#512,#511);\r
+-#514=CARTESIAN_POINT('',(2.275E1,0.E0,1.95E1));\r
+-#515=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#516=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#517=AXIS2_PLACEMENT_3D('',#514,#515,#516);\r
+-#519=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#520=VECTOR('',#519,3.E0);\r
+-#521=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));\r
+-#522=LINE('',#521,#520);\r
+-#523=CARTESIAN_POINT('',(1.65E1,0.E0,9.E0));\r
+-#524=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#525=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);\r
+-#528=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#529=VECTOR('',#528,3.E0);\r
+-#530=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));\r
+-#531=LINE('',#530,#529);\r
+-#532=CARTESIAN_POINT('',(1.35E1,0.E0,9.E0));\r
+-#533=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#534=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#535=AXIS2_PLACEMENT_3D('',#532,#533,#534);\r
+-#537=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#538=VECTOR('',#537,3.E0);\r
+-#539=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));\r
+-#540=LINE('',#539,#538);\r
+-#541=CARTESIAN_POINT('',(1.65E1,0.E0,1.8E1));\r
+-#542=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#543=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#544=AXIS2_PLACEMENT_3D('',#541,#542,#543);\r
+-#546=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#547=VECTOR('',#546,3.E0);\r
+-#548=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));\r
+-#549=LINE('',#548,#547);\r
+-#550=CARTESIAN_POINT('',(1.35E1,0.E0,1.8E1));\r
+-#551=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#552=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#553=AXIS2_PLACEMENT_3D('',#550,#551,#552);\r
+-#555=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#556=VECTOR('',#555,3.E0);\r
+-#557=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));\r
+-#558=LINE('',#557,#556);\r
+-#559=CARTESIAN_POINT('',(1.35E1,0.E0,3.075E1));\r
+-#560=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#561=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#562=AXIS2_PLACEMENT_3D('',#559,#560,#561);\r
+-#564=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#565=VECTOR('',#564,3.E0);\r
+-#566=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));\r
+-#567=LINE('',#566,#565);\r
+-#568=CARTESIAN_POINT('',(1.65E1,0.E0,3.075E1));\r
+-#569=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#570=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#571=AXIS2_PLACEMENT_3D('',#568,#569,#570);\r
+-#573=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#574=VECTOR('',#573,3.1E-1);\r
+-#575=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));\r
+-#576=LINE('',#575,#574);\r
+-#577=CARTESIAN_POINT('',(2.274875E1,0.E0,7.5E0));\r
+-#578=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#579=DIRECTION('',(1.E0,0.E0,-3.956251312695E-14));\r
+-#580=AXIS2_PLACEMENT_3D('',#577,#578,#579);\r
+-#582=DIRECTION('',(2.292073341162E-14,0.E0,-1.E0));\r
+-#583=VECTOR('',#582,3.1E-1);\r
+-#584=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));\r
+-#585=LINE('',#584,#583);\r
+-#586=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#587=VECTOR('',#586,2.425E-1);\r
+-#588=CARTESIAN_POINT('',(2.44325E1,0.E0,8.69E0));\r
+-#589=LINE('',#588,#587);\r
+-#590=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#591=VECTOR('',#590,8.E-1);\r
+-#592=CARTESIAN_POINT('',(2.53125E1,0.E0,1.037E1));\r
+-#593=LINE('',#592,#591);\r
+-#594=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#595=VECTOR('',#594,3.865E0);\r
+-#596=CARTESIAN_POINT('',(2.05675E1,0.E0,1.125E1));\r
+-#597=LINE('',#596,#595);\r
+-#598=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#599=VECTOR('',#598,8.E-1);\r
+-#600=CARTESIAN_POINT('',(1.96875E1,0.E0,9.57E0));\r
+-#601=LINE('',#600,#599);\r
+-#602=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#603=VECTOR('',#602,7.4E-1);\r
+-#604=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));\r
+-#605=LINE('',#604,#603);\r
+-#606=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#607=VECTOR('',#606,4.263248410977E0);\r
+-#608=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));\r
+-#609=LINE('',#608,#607);\r
+-#610=CARTESIAN_POINT('',(2.239E1,0.E0,4.5E0));\r
+-#611=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#612=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#613=AXIS2_PLACEMENT_3D('',#610,#611,#612);\r
+-#615=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));\r
+-#616=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#617=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#618=AXIS2_PLACEMENT_3D('',#615,#616,#617);\r
+-#620=CARTESIAN_POINT('',(1.944696065761E1,0.E0,1.645354088550E0));\r
+-#621=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#622=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811866E-1));\r
+-#623=AXIS2_PLACEMENT_3D('',#620,#621,#622);\r
+-#625=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#626=VECTOR('',#625,4.263248410977E0);\r
+-#627=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));\r
+-#628=LINE('',#627,#626);\r
+-#629=CARTESIAN_POINT('',(1.61E0,0.E0,2.75E1));\r
+-#630=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#631=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#632=AXIS2_PLACEMENT_3D('',#629,#630,#631);\r
+-#634=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));\r
+-#635=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#636=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#637=AXIS2_PLACEMENT_3D('',#634,#635,#636);\r
+-#639=CARTESIAN_POINT('',(4.553039342392E0,0.E0,3.035464591145E1));\r
+-#640=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#641=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#642=AXIS2_PLACEMENT_3D('',#639,#640,#641);\r
+-#644=CARTESIAN_POINT('',(2.239E1,0.E0,2.75E1));\r
+-#645=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#646=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#647=AXIS2_PLACEMENT_3D('',#644,#645,#646);\r
+-#649=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#650=VECTOR('',#649,4.263248410977E0);\r
+-#651=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));\r
+-#652=LINE('',#651,#650);\r
+-#653=CARTESIAN_POINT('',(1.944696065761E1,0.E0,3.035464591145E1));\r
+-#654=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#655=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811866E-1));\r
+-#656=AXIS2_PLACEMENT_3D('',#653,#654,#655);\r
+-#658=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));\r
+-#659=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#660=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#661=AXIS2_PLACEMENT_3D('',#658,#659,#660);\r
+-#663=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));\r
+-#664=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#665=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#666=AXIS2_PLACEMENT_3D('',#663,#664,#665);\r
+-#668=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));\r
+-#669=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#670=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#671=AXIS2_PLACEMENT_3D('',#668,#669,#670);\r
+-#673=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));\r
+-#674=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#675=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#676=AXIS2_PLACEMENT_3D('',#673,#674,#675);\r
+-#678=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));\r
+-#679=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#680=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#681=AXIS2_PLACEMENT_3D('',#678,#679,#680);\r
+-#683=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));\r
+-#684=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#685=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#686=AXIS2_PLACEMENT_3D('',#683,#684,#685);\r
+-#688=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));\r
+-#689=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#690=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#691=AXIS2_PLACEMENT_3D('',#688,#689,#690);\r
+-#693=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));\r
+-#694=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#695=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#696=AXIS2_PLACEMENT_3D('',#693,#694,#695);\r
+-#698=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));\r
+-#699=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#700=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#701=AXIS2_PLACEMENT_3D('',#698,#699,#700);\r
+-#703=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));\r
+-#704=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#705=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#706=AXIS2_PLACEMENT_3D('',#703,#704,#705);\r
+-#708=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));\r
+-#709=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#710=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#711=AXIS2_PLACEMENT_3D('',#708,#709,#710);\r
+-#713=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));\r
+-#714=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#715=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#716=AXIS2_PLACEMENT_3D('',#713,#714,#715);\r
+-#718=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));\r
+-#719=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#720=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#721=AXIS2_PLACEMENT_3D('',#718,#719,#720);\r
+-#723=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));\r
+-#724=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#725=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#726=AXIS2_PLACEMENT_3D('',#723,#724,#725);\r
+-#728=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));\r
+-#729=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#730=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#731=AXIS2_PLACEMENT_3D('',#728,#729,#730);\r
+-#733=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));\r
+-#734=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#735=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#736=AXIS2_PLACEMENT_3D('',#733,#734,#735);\r
+-#738=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));\r
+-#739=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#740=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#741=AXIS2_PLACEMENT_3D('',#738,#739,#740);\r
+-#743=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#744=VECTOR('',#743,1.029563014099E1);\r
+-#745=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));\r
+-#746=LINE('',#745,#744);\r
+-#747=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#748=VECTOR('',#747,2.E0);\r
+-#749=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));\r
+-#750=LINE('',#749,#748);\r
+-#751=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#752=VECTOR('',#751,2.E0);\r
+-#753=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));\r
+-#754=LINE('',#753,#752);\r
+-#755=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#756=VECTOR('',#755,1.029563014099E1);\r
+-#757=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));\r
+-#758=LINE('',#757,#756);\r
+-#759=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#760=VECTOR('',#759,3.895172754280E0);\r
+-#761=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));\r
+-#762=LINE('',#761,#760);\r
+-#763=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#764=VECTOR('',#763,6.863753427325E0);\r
+-#765=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));\r
+-#766=LINE('',#765,#764);\r
+-#767=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#768=VECTOR('',#767,5.618394209466E-1);\r
+-#769=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));\r
+-#770=LINE('',#769,#768);\r
+-#771=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#772=VECTOR('',#771,6.E0);\r
+-#773=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));\r
+-#774=LINE('',#773,#772);\r
+-#775=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#776=VECTOR('',#775,6.863753427325E0);\r
+-#777=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.E0));\r
+-#778=LINE('',#777,#776);\r
+-#779=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#780=VECTOR('',#779,3.895172754280E0);\r
+-#781=CARTESIAN_POINT('',(2.025E1,2.E0,8.E0));\r
+-#782=LINE('',#781,#780);\r
+-#783=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#784=VECTOR('',#783,6.E0);\r
+-#785=CARTESIAN_POINT('',(1.95E1,8.75E0,8.E0));\r
+-#786=LINE('',#785,#784);\r
+-#787=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#788=VECTOR('',#787,5.618394209466E-1);\r
+-#789=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.E0));\r
+-#790=LINE('',#789,#788);\r
+-#791=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#792=VECTOR('',#791,2.5E-1);\r
+-#793=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.E0));\r
+-#794=LINE('',#793,#792);\r
+-#795=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#796=VECTOR('',#795,2.5E-1);\r
+-#797=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.E0));\r
+-#798=LINE('',#797,#796);\r
+-#799=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));\r
+-#800=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#801=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#802=AXIS2_PLACEMENT_3D('',#799,#800,#801);\r
+-#804=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));\r
+-#805=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#806=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#807=AXIS2_PLACEMENT_3D('',#804,#805,#806);\r
+-#809=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#810=VECTOR('',#809,2.E0);\r
+-#811=CARTESIAN_POINT('',(1.95875E1,1.05E1,8.E0));\r
+-#812=LINE('',#811,#810);\r
+-#813=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#814=VECTOR('',#813,2.E0);\r
+-#815=CARTESIAN_POINT('',(1.99125E1,1.05E1,8.E0));\r
+-#816=LINE('',#815,#814);\r
+-#817=CARTESIAN_POINT('',(1.975E1,1.05E1,1.E1));\r
+-#818=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#819=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#820=AXIS2_PLACEMENT_3D('',#817,#818,#819);\r
+-#822=CARTESIAN_POINT('',(1.975E1,1.05E1,1.E1));\r
+-#823=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#824=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#825=AXIS2_PLACEMENT_3D('',#822,#823,#824);\r
+-#827=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#828=VECTOR('',#827,5.E0);\r
+-#829=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));\r
+-#830=LINE('',#829,#828);\r
+-#831=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#832=VECTOR('',#831,1.75E0);\r
+-#833=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));\r
+-#834=LINE('',#833,#832);\r
+-#835=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#836=VECTOR('',#835,5.E0);\r
+-#837=CARTESIAN_POINT('',(2.2E1,1.5E0,1.E1));\r
+-#838=LINE('',#837,#836);\r
+-#839=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#840=VECTOR('',#839,1.E1);\r
+-#841=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));\r
+-#842=LINE('',#841,#840);\r
+-#843=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#844=VECTOR('',#843,2.E0);\r
+-#845=CARTESIAN_POINT('',(1.9E1,1.15E1,1.E1));\r
+-#846=LINE('',#845,#844);\r
+-#847=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#848=VECTOR('',#847,1.029563014099E1);\r
+-#849=CARTESIAN_POINT('',(2.1E1,1.15E1,1.E1));\r
+-#850=LINE('',#849,#848);\r
+-#851=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#852=VECTOR('',#851,1.E0);\r
+-#853=CARTESIAN_POINT('',(2.6E1,2.5E0,1.E1));\r
+-#854=LINE('',#853,#852);\r
+-#855=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#856=VECTOR('',#855,1.972007605460E-1);\r
+-#857=CARTESIAN_POINT('',(2.204720076055E1,7.E0,1.E1));\r
+-#858=LINE('',#857,#856);\r
+-#859=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#860=VECTOR('',#859,2.059126028197E0);\r
+-#861=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,1.E1));\r
+-#862=LINE('',#861,#860);\r
+-#863=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#864=VECTOR('',#863,1.197200760546E0);\r
+-#865=CARTESIAN_POINT('',(1.985E1,9.5E0,1.E1));\r
+-#866=LINE('',#865,#864);\r
+-#867=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#868=VECTOR('',#867,6.8E0);\r
+-#869=CARTESIAN_POINT('',(1.95E1,2.35E0,1.E1));\r
+-#870=LINE('',#869,#868);\r
+-#871=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#872=VECTOR('',#871,1.3E0);\r
+-#873=CARTESIAN_POINT('',(2.115E1,2.E0,1.E1));\r
+-#874=LINE('',#873,#872);\r
+-#875=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#876=VECTOR('',#875,4.3E0);\r
+-#877=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));\r
+-#878=LINE('',#877,#876);\r
+-#879=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#880=VECTOR('',#879,5.773502691896E0);\r
+-#881=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));\r
+-#882=LINE('',#881,#880);\r
+-#883=CARTESIAN_POINT('',(6.45E0,1.5E0,2.975E1));\r
+-#884=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#885=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#886=AXIS2_PLACEMENT_3D('',#883,#884,#885);\r
+-#888=CARTESIAN_POINT('',(6.45E0,1.5E0,2.975E1));\r
+-#889=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#890=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#891=AXIS2_PLACEMENT_3D('',#888,#889,#890);\r
+-#893=CARTESIAN_POINT('',(7.45E0,1.5E0,2.975E1));\r
+-#894=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#895=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#896=AXIS2_PLACEMENT_3D('',#893,#894,#895);\r
+-#898=CARTESIAN_POINT('',(7.45E0,1.5E0,2.975E1));\r
+-#899=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#900=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#901=AXIS2_PLACEMENT_3D('',#898,#899,#900);\r
+-#903=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#904=VECTOR('',#903,4.531373033403E0);\r
+-#905=CARTESIAN_POINT('',(2.5E1,1.5E0,8.E0));\r
+-#906=LINE('',#905,#904);\r
+-#907=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#908=VECTOR('',#907,9.E0);\r
+-#909=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));\r
+-#910=LINE('',#909,#908);\r
+-#911=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#912=VECTOR('',#911,4.531373033403E0);\r
+-#913=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));\r
+-#914=LINE('',#913,#912);\r
+-#915=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#916=VECTOR('',#915,3.E0);\r
+-#917=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));\r
+-#918=LINE('',#917,#916);\r
+-#919=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#920=VECTOR('',#919,1.6E1);\r
+-#921=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));\r
+-#922=LINE('',#921,#920);\r
+-#923=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#924=VECTOR('',#923,3.E0);\r
+-#925=CARTESIAN_POINT('',(2.4E1,1.5E0,7.E0));\r
+-#926=LINE('',#925,#924);\r
+-#927=CARTESIAN_POINT('',(1.755E1,1.5E0,2.975E1));\r
+-#928=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#929=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#930=AXIS2_PLACEMENT_3D('',#927,#928,#929);\r
+-#932=CARTESIAN_POINT('',(1.755E1,1.5E0,2.975E1));\r
+-#933=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#934=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#935=AXIS2_PLACEMENT_3D('',#932,#933,#934);\r
+-#937=CARTESIAN_POINT('',(1.655E1,1.5E0,2.975E1));\r
+-#938=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#939=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#940=AXIS2_PLACEMENT_3D('',#937,#938,#939);\r
+-#942=CARTESIAN_POINT('',(1.655E1,1.5E0,2.975E1));\r
+-#943=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#944=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#945=AXIS2_PLACEMENT_3D('',#942,#943,#944);\r
+-#947=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#948=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#949=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#950=AXIS2_PLACEMENT_3D('',#947,#948,#949);\r
+-#952=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#953=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#954=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#955=AXIS2_PLACEMENT_3D('',#952,#953,#954);\r
+-#957=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#958=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#959=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#960=AXIS2_PLACEMENT_3D('',#957,#958,#959);\r
+-#962=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#963=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#964=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#965=AXIS2_PLACEMENT_3D('',#962,#963,#964);\r
+-#967=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#968=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#969=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#970=AXIS2_PLACEMENT_3D('',#967,#968,#969);\r
+-#972=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#973=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#974=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#975=AXIS2_PLACEMENT_3D('',#972,#973,#974);\r
+-#977=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#978=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#979=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#980=AXIS2_PLACEMENT_3D('',#977,#978,#979);\r
+-#982=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#983=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#984=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#985=AXIS2_PLACEMENT_3D('',#982,#983,#984);\r
+-#987=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#988=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#989=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#990=AXIS2_PLACEMENT_3D('',#987,#988,#989);\r
+-#992=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#993=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#994=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#995=AXIS2_PLACEMENT_3D('',#992,#993,#994);\r
+-#997=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#998=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#999=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1000=AXIS2_PLACEMENT_3D('',#997,#998,#999);\r
+-#1002=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#1003=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1004=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1005=AXIS2_PLACEMENT_3D('',#1002,#1003,#1004);\r
+-#1007=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#1008=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1009=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1010=AXIS2_PLACEMENT_3D('',#1007,#1008,#1009);\r
+-#1012=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#1013=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1014=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1015=AXIS2_PLACEMENT_3D('',#1012,#1013,#1014);\r
+-#1017=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#1018=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1019=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1020=AXIS2_PLACEMENT_3D('',#1017,#1018,#1019);\r
+-#1022=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#1023=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1024=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1025=AXIS2_PLACEMENT_3D('',#1022,#1023,#1024);\r
+-#1027=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#1028=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1029=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1030=AXIS2_PLACEMENT_3D('',#1027,#1028,#1029);\r
+-#1032=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#1033=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1034=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1035=AXIS2_PLACEMENT_3D('',#1032,#1033,#1034);\r
+-#1037=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#1038=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1039=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1040=AXIS2_PLACEMENT_3D('',#1037,#1038,#1039);\r
+-#1042=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#1043=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1044=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1045=AXIS2_PLACEMENT_3D('',#1042,#1043,#1044);\r
+-#1047=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#1048=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1049=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1050=AXIS2_PLACEMENT_3D('',#1047,#1048,#1049);\r
+-#1052=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#1053=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1054=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1055=AXIS2_PLACEMENT_3D('',#1052,#1053,#1054);\r
+-#1057=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#1058=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1059=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1060=AXIS2_PLACEMENT_3D('',#1057,#1058,#1059);\r
+-#1062=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#1063=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1064=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1065=AXIS2_PLACEMENT_3D('',#1062,#1063,#1064);\r
+-#1067=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1068=VECTOR('',#1067,2.5625E0);\r
+-#1069=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));\r
+-#1070=LINE('',#1069,#1068);\r
+-#1071=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1072=VECTOR('',#1071,1.3E1);\r
+-#1073=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));\r
+-#1074=LINE('',#1073,#1072);\r
+-#1075=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1076=VECTOR('',#1075,2.5625E0);\r
+-#1077=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));\r
+-#1078=LINE('',#1077,#1076);\r
+-#1079=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1080=VECTOR('',#1079,9.E0);\r
+-#1081=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));\r
+-#1082=LINE('',#1081,#1080);\r
+-#1083=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1084=VECTOR('',#1083,1.3E1);\r
+-#1085=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));\r
+-#1086=LINE('',#1085,#1084);\r
+-#1087=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1088=VECTOR('',#1087,8.125E-1);\r
+-#1089=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));\r
+-#1090=LINE('',#1089,#1088);\r
+-#1091=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1092=VECTOR('',#1091,1.E0);\r
+-#1093=CARTESIAN_POINT('',(2.05E1,1.5E0,1.225E1));\r
+-#1094=LINE('',#1093,#1092);\r
+-#1095=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1096=VECTOR('',#1095,7.5E-1);\r
+-#1097=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));\r
+-#1098=LINE('',#1097,#1096);\r
+-#1099=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1100=VECTOR('',#1099,7.5E-1);\r
+-#1101=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));\r
+-#1102=LINE('',#1101,#1100);\r
+-#1103=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1104=VECTOR('',#1103,1.E0);\r
+-#1105=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));\r
+-#1106=LINE('',#1105,#1104);\r
+-#1107=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1108=VECTOR('',#1107,8.125E-1);\r
+-#1109=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));\r
+-#1110=LINE('',#1109,#1108);\r
+-#1111=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#1112=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1113=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1114=AXIS2_PLACEMENT_3D('',#1111,#1112,#1113);\r
+-#1116=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#1117=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1118=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1119=AXIS2_PLACEMENT_3D('',#1116,#1117,#1118);\r
+-#1121=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#1122=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1123=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1124=AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);\r
+-#1126=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#1127=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1128=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1129=AXIS2_PLACEMENT_3D('',#1126,#1127,#1128);\r
+-#1131=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#1132=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1133=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1134=AXIS2_PLACEMENT_3D('',#1131,#1132,#1133);\r
+-#1136=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#1137=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1138=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1139=AXIS2_PLACEMENT_3D('',#1136,#1137,#1138);\r
+-#1141=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#1142=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1143=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1144=AXIS2_PLACEMENT_3D('',#1141,#1142,#1143);\r
+-#1146=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#1147=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1148=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1149=AXIS2_PLACEMENT_3D('',#1146,#1147,#1148);\r
+-#1151=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#1152=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1153=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1154=AXIS2_PLACEMENT_3D('',#1151,#1152,#1153);\r
+-#1156=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#1157=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1158=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1159=AXIS2_PLACEMENT_3D('',#1156,#1157,#1158);\r
+-#1161=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#1162=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1163=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1164=AXIS2_PLACEMENT_3D('',#1161,#1162,#1163);\r
+-#1166=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#1167=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1168=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1169=AXIS2_PLACEMENT_3D('',#1166,#1167,#1168);\r
+-#1171=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1172=VECTOR('',#1171,2.886751345948E0);\r
+-#1173=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));\r
+-#1174=LINE('',#1173,#1172);\r
+-#1175=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1176=VECTOR('',#1175,2.25E0);\r
+-#1177=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));\r
+-#1178=LINE('',#1177,#1176);\r
+-#1179=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1180=VECTOR('',#1179,1.75E0);\r
+-#1181=CARTESIAN_POINT('',(2.6E1,1.5E0,1.E1));\r
+-#1182=LINE('',#1181,#1180);\r
+-#1183=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1184=VECTOR('',#1183,5.E-1);\r
+-#1185=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));\r
+-#1186=LINE('',#1185,#1184);\r
+-#1187=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1188=VECTOR('',#1187,1.475E1);\r
+-#1189=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));\r
+-#1190=LINE('',#1189,#1188);\r
+-#1191=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1192=VECTOR('',#1191,1.6E1);\r
+-#1193=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));\r
+-#1194=LINE('',#1193,#1192);\r
+-#1195=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1196=VECTOR('',#1195,1.475E1);\r
+-#1197=CARTESIAN_POINT('',(0.E0,1.5E0,1.325E1));\r
+-#1198=LINE('',#1197,#1196);\r
+-#1199=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1200=VECTOR('',#1199,5.E-1);\r
+-#1201=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));\r
+-#1202=LINE('',#1201,#1200);\r
+-#1203=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1204=VECTOR('',#1203,1.75E0);\r
+-#1205=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));\r
+-#1206=LINE('',#1205,#1204);\r
+-#1207=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1208=VECTOR('',#1207,2.25E0);\r
+-#1209=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));\r
+-#1210=LINE('',#1209,#1208);\r
+-#1211=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1212=VECTOR('',#1211,2.886751345948E0);\r
+-#1213=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));\r
+-#1214=LINE('',#1213,#1212);\r
+-#1215=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1216=VECTOR('',#1215,1.75E0);\r
+-#1217=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));\r
+-#1218=LINE('',#1217,#1216);\r
+-#1219=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1220=VECTOR('',#1219,2.886751345948E0);\r
+-#1221=CARTESIAN_POINT('',(2.E0,1.5E0,1.288675134595E1));\r
+-#1222=LINE('',#1221,#1220);\r
+-#1223=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1224=VECTOR('',#1223,3.E0);\r
+-#1225=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));\r
+-#1226=LINE('',#1225,#1224);\r
+-#1227=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1228=VECTOR('',#1227,1.4E1);\r
+-#1229=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));\r
+-#1230=LINE('',#1229,#1228);\r
+-#1231=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1232=VECTOR('',#1231,3.E0);\r
+-#1233=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));\r
+-#1234=LINE('',#1233,#1232);\r
+-#1235=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1236=VECTOR('',#1235,2.886751345948E0);\r
+-#1237=CARTESIAN_POINT('',(2.2E1,1.5E0,1.288675134595E1));\r
+-#1238=LINE('',#1237,#1236);\r
+-#1239=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1240=VECTOR('',#1239,1.75E0);\r
+-#1241=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));\r
+-#1242=LINE('',#1241,#1240);\r
+-#1243=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1244=VECTOR('',#1243,2.5E-1);\r
+-#1245=CARTESIAN_POINT('',(6.35E0,1.25E0,2.975E1));\r
+-#1246=LINE('',#1245,#1244);\r
+-#1247=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1248=VECTOR('',#1247,2.5E-1);\r
+-#1249=CARTESIAN_POINT('',(6.55E0,1.25E0,2.975E1));\r
+-#1250=LINE('',#1249,#1248);\r
+-#1251=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));\r
+-#1252=VECTOR('',#1251,1.154700538379E-1);\r
+-#1253=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));\r
+-#1254=LINE('',#1253,#1252);\r
+-#1255=CARTESIAN_POINT('',(6.45E0,1.25E0,2.975E1));\r
+-#1256=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1257=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1258=AXIS2_PLACEMENT_3D('',#1255,#1256,#1257);\r
+-#1260=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));\r
+-#1261=VECTOR('',#1260,1.154700538379E-1);\r
+-#1262=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));\r
+-#1263=LINE('',#1262,#1261);\r
+-#1264=CARTESIAN_POINT('',(6.45E0,1.25E0,2.975E1));\r
+-#1265=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1266=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1267=AXIS2_PLACEMENT_3D('',#1264,#1265,#1266);\r
+-#1269=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1270=VECTOR('',#1269,2.5E-1);\r
+-#1271=CARTESIAN_POINT('',(7.35E0,1.25E0,2.975E1));\r
+-#1272=LINE('',#1271,#1270);\r
+-#1273=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1274=VECTOR('',#1273,2.5E-1);\r
+-#1275=CARTESIAN_POINT('',(7.55E0,1.25E0,2.975E1));\r
+-#1276=LINE('',#1275,#1274);\r
+-#1277=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));\r
+-#1278=VECTOR('',#1277,1.154700538379E-1);\r
+-#1279=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));\r
+-#1280=LINE('',#1279,#1278);\r
+-#1281=CARTESIAN_POINT('',(7.45E0,1.25E0,2.975E1));\r
+-#1282=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1283=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1284=AXIS2_PLACEMENT_3D('',#1281,#1282,#1283);\r
+-#1286=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));\r
+-#1287=VECTOR('',#1286,1.154700538379E-1);\r
+-#1288=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));\r
+-#1289=LINE('',#1288,#1287);\r
+-#1290=CARTESIAN_POINT('',(7.45E0,1.25E0,2.975E1));\r
+-#1291=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1292=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1293=AXIS2_PLACEMENT_3D('',#1290,#1291,#1292);\r
+-#1295=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1296=VECTOR('',#1295,1.5E0);\r
+-#1297=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));\r
+-#1298=LINE('',#1297,#1296);\r
+-#1299=CARTESIAN_POINT('',(2.046862696660E1,0.E0,7.E0));\r
+-#1300=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1301=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1302=AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);\r
+-#1304=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1305=VECTOR('',#1304,1.5E0);\r
+-#1306=CARTESIAN_POINT('',(2.146078370825E1,0.E0,6.875E0));\r
+-#1307=LINE('',#1306,#1305);\r
+-#1308=CARTESIAN_POINT('',(2.046862696660E1,1.5E0,7.E0));\r
+-#1309=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1310=DIRECTION('',(9.921567416492E-1,0.E0,-1.25E-1));\r
+-#1311=AXIS2_PLACEMENT_3D('',#1308,#1309,#1310);\r
+-#1313=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));\r
+-#1314=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1315=DIRECTION('',(9.921567416492E-1,0.E0,-1.25E-1));\r
+-#1316=AXIS2_PLACEMENT_3D('',#1313,#1314,#1315);\r
+-#1318=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1319=VECTOR('',#1318,1.5E0);\r
+-#1320=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));\r
+-#1321=LINE('',#1320,#1319);\r
+-#1322=CARTESIAN_POINT('',(1.65E1,1.5E0,7.5E0));\r
+-#1323=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1324=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1325=AXIS2_PLACEMENT_3D('',#1322,#1323,#1324);\r
+-#1327=CARTESIAN_POINT('',(7.5E0,1.5E0,7.5E0));\r
+-#1328=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1329=DIRECTION('',(-9.921567416492E-1,0.E0,-1.25E-1));\r
+-#1330=AXIS2_PLACEMENT_3D('',#1327,#1328,#1329);\r
+-#1332=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1333=VECTOR('',#1332,1.5E0);\r
+-#1334=CARTESIAN_POINT('',(7.5E0,1.5E0,2.5E0));\r
+-#1335=LINE('',#1334,#1333);\r
+-#1336=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));\r
+-#1337=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1338=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1339=AXIS2_PLACEMENT_3D('',#1336,#1337,#1338);\r
+-#1341=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1342=VECTOR('',#1341,1.5E0);\r
+-#1343=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));\r
+-#1344=LINE('',#1343,#1342);\r
+-#1345=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,7.E0));\r
+-#1346=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1347=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1348=AXIS2_PLACEMENT_3D('',#1345,#1346,#1347);\r
+-#1350=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1351=VECTOR('',#1350,1.5E0);\r
+-#1352=CARTESIAN_POINT('',(2.539216291754E0,1.5E0,6.875E0));\r
+-#1353=LINE('',#1352,#1351);\r
+-#1354=CARTESIAN_POINT('',(3.531373033403E0,0.E0,7.E0));\r
+-#1355=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1356=DIRECTION('',(-9.921567416492E-1,0.E0,-1.25E-1));\r
+-#1357=AXIS2_PLACEMENT_3D('',#1354,#1355,#1356);\r
+-#1359=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1360=VECTOR('',#1359,1.5E0);\r
+-#1361=CARTESIAN_POINT('',(0.E0,1.5E0,7.E0));\r
+-#1362=LINE('',#1361,#1360);\r
+-#1363=CARTESIAN_POINT('',(-1.E0,1.5E0,7.E0));\r
+-#1364=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1365=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1366=AXIS2_PLACEMENT_3D('',#1363,#1364,#1365);\r
+-#1368=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1369=VECTOR('',#1368,1.5E0);\r
+-#1370=CARTESIAN_POINT('',(-1.E0,1.5E0,8.E0));\r
+-#1371=LINE('',#1370,#1369);\r
+-#1372=CARTESIAN_POINT('',(-1.E0,0.E0,7.E0));\r
+-#1373=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1374=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1375=AXIS2_PLACEMENT_3D('',#1372,#1373,#1374);\r
+-#1377=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1378=VECTOR('',#1377,1.5E0);\r
+-#1379=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));\r
+-#1380=LINE('',#1379,#1378);\r
+-#1381=CARTESIAN_POINT('',(-1.E0,0.E0,1.325E1));\r
+-#1382=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1383=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1384=AXIS2_PLACEMENT_3D('',#1381,#1382,#1383);\r
+-#1386=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1387=VECTOR('',#1386,1.5E0);\r
+-#1388=CARTESIAN_POINT('',(-1.E0,0.E0,1.225E1));\r
+-#1389=LINE('',#1388,#1387);\r
+-#1390=CARTESIAN_POINT('',(-1.E0,1.5E0,1.325E1));\r
+-#1391=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1392=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1393=AXIS2_PLACEMENT_3D('',#1390,#1391,#1392);\r
+-#1395=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1396=VECTOR('',#1395,1.5E0);\r
+-#1397=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));\r
+-#1398=LINE('',#1397,#1396);\r
+-#1399=CARTESIAN_POINT('',(3.5E0,1.5E0,1.325E1));\r
+-#1400=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1401=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1402=AXIS2_PLACEMENT_3D('',#1399,#1400,#1401);\r
+-#1404=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1405=VECTOR('',#1404,1.5E0);\r
+-#1406=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));\r
+-#1407=LINE('',#1406,#1405);\r
+-#1408=CARTESIAN_POINT('',(3.5E0,0.E0,1.325E1));\r
+-#1409=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1410=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1411=AXIS2_PLACEMENT_3D('',#1408,#1409,#1410);\r
+-#1413=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1414=VECTOR('',#1413,1.5E0);\r
+-#1415=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));\r
+-#1416=LINE('',#1415,#1414);\r
+-#1417=CARTESIAN_POINT('',(5.5E0,1.5E0,2.19375E1));\r
+-#1418=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1419=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1420=AXIS2_PLACEMENT_3D('',#1417,#1418,#1419);\r
+-#1422=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1423=VECTOR('',#1422,1.5E0);\r
+-#1424=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));\r
+-#1425=LINE('',#1424,#1423);\r
+-#1426=CARTESIAN_POINT('',(5.5E0,0.E0,2.19375E1));\r
+-#1427=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1428=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1429=AXIS2_PLACEMENT_3D('',#1426,#1427,#1428);\r
+-#1431=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1432=VECTOR('',#1431,1.5E0);\r
+-#1433=CARTESIAN_POINT('',(2.15E1,0.E0,2.19375E1));\r
+-#1434=LINE('',#1433,#1432);\r
+-#1435=CARTESIAN_POINT('',(1.85E1,0.E0,2.19375E1));\r
+-#1436=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1437=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1438=AXIS2_PLACEMENT_3D('',#1435,#1436,#1437);\r
+-#1440=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1441=VECTOR('',#1440,1.5E0);\r
+-#1442=CARTESIAN_POINT('',(1.85E1,0.E0,1.89375E1));\r
+-#1443=LINE('',#1442,#1441);\r
+-#1444=CARTESIAN_POINT('',(1.85E1,1.5E0,2.19375E1));\r
+-#1445=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1446=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1447=AXIS2_PLACEMENT_3D('',#1444,#1445,#1446);\r
+-#1449=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1450=VECTOR('',#1449,1.5E0);\r
+-#1451=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));\r
+-#1452=LINE('',#1451,#1450);\r
+-#1453=CARTESIAN_POINT('',(1.65E1,1.5E0,2.45E1));\r
+-#1454=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1455=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1456=AXIS2_PLACEMENT_3D('',#1453,#1454,#1455);\r
+-#1458=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1459=VECTOR('',#1458,1.5E0);\r
+-#1460=CARTESIAN_POINT('',(1.65E1,1.5E0,2.95E1));\r
+-#1461=LINE('',#1460,#1459);\r
+-#1462=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));\r
+-#1463=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1464=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1465=AXIS2_PLACEMENT_3D('',#1462,#1463,#1464);\r
+-#1467=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1468=VECTOR('',#1467,1.5E0);\r
+-#1469=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));\r
+-#1470=LINE('',#1469,#1468);\r
+-#1471=CARTESIAN_POINT('',(7.5E0,1.5E0,2.45E1));\r
+-#1472=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1473=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1474=AXIS2_PLACEMENT_3D('',#1471,#1472,#1473);\r
+-#1476=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1477=VECTOR('',#1476,1.5E0);\r
+-#1478=CARTESIAN_POINT('',(2.5E0,1.5E0,2.45E1));\r
+-#1479=LINE('',#1478,#1477);\r
+-#1480=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));\r
+-#1481=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1482=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1483=AXIS2_PLACEMENT_3D('',#1480,#1481,#1482);\r
+-#1485=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1486=VECTOR('',#1485,1.5E0);\r
+-#1487=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));\r
+-#1488=LINE('',#1487,#1486);\r
+-#1489=CARTESIAN_POINT('',(1.85E1,1.5E0,1.40625E1));\r
+-#1490=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1491=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1492=AXIS2_PLACEMENT_3D('',#1489,#1490,#1491);\r
+-#1494=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1495=VECTOR('',#1494,1.5E0);\r
+-#1496=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));\r
+-#1497=LINE('',#1496,#1495);\r
+-#1498=CARTESIAN_POINT('',(1.85E1,0.E0,1.40625E1));\r
+-#1499=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1500=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1501=AXIS2_PLACEMENT_3D('',#1498,#1499,#1500);\r
+-#1503=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1504=VECTOR('',#1503,1.5E0);\r
+-#1505=CARTESIAN_POINT('',(2.5E0,0.E0,1.40625E1));\r
+-#1506=LINE('',#1505,#1504);\r
+-#1507=CARTESIAN_POINT('',(5.5E0,0.E0,1.40625E1));\r
+-#1508=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1509=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1510=AXIS2_PLACEMENT_3D('',#1507,#1508,#1509);\r
+-#1512=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1513=VECTOR('',#1512,1.5E0);\r
+-#1514=CARTESIAN_POINT('',(5.5E0,0.E0,1.70625E1));\r
+-#1515=LINE('',#1514,#1513);\r
+-#1516=CARTESIAN_POINT('',(5.5E0,1.5E0,1.40625E1));\r
+-#1517=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1518=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1519=AXIS2_PLACEMENT_3D('',#1516,#1517,#1518);\r
+-#1521=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1522=VECTOR('',#1521,1.5E0);\r
+-#1523=CARTESIAN_POINT('',(2.15E1,0.E0,1.325E1));\r
+-#1524=LINE('',#1523,#1522);\r
+-#1525=CARTESIAN_POINT('',(2.05E1,0.E0,1.325E1));\r
+-#1526=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1527=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1528=AXIS2_PLACEMENT_3D('',#1525,#1526,#1527);\r
+-#1530=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1531=VECTOR('',#1530,1.5E0);\r
+-#1532=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));\r
+-#1533=LINE('',#1532,#1531);\r
+-#1534=CARTESIAN_POINT('',(2.05E1,1.5E0,1.325E1));\r
+-#1535=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1536=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1537=AXIS2_PLACEMENT_3D('',#1534,#1535,#1536);\r
+-#1539=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1540=VECTOR('',#1539,1.5E0);\r
+-#1541=CARTESIAN_POINT('',(2.4E1,1.5E0,1.325E1));\r
+-#1542=LINE('',#1541,#1540);\r
+-#1543=CARTESIAN_POINT('',(2.5E1,1.5E0,1.325E1));\r
+-#1544=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1545=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1546=AXIS2_PLACEMENT_3D('',#1543,#1544,#1545);\r
+-#1548=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1549=VECTOR('',#1548,1.5E0);\r
+-#1550=CARTESIAN_POINT('',(2.5E1,1.5E0,1.225E1));\r
+-#1551=LINE('',#1550,#1549);\r
+-#1552=CARTESIAN_POINT('',(2.5E1,0.E0,1.325E1));\r
+-#1553=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1554=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1555=AXIS2_PLACEMENT_3D('',#1552,#1553,#1554);\r
+-#1557=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1558=VECTOR('',#1557,1.5E0);\r
+-#1559=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));\r
+-#1560=LINE('',#1559,#1558);\r
+-#1561=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1562=VECTOR('',#1561,5.656854249492E0);\r
+-#1563=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));\r
+-#1564=LINE('',#1563,#1562);\r
+-#1565=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1566=VECTOR('',#1565,1.5E0);\r
+-#1567=CARTESIAN_POINT('',(2.E1,0.E0,3.2E1));\r
+-#1568=LINE('',#1567,#1566);\r
+-#1569=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1570=VECTOR('',#1569,5.656854249492E0);\r
+-#1571=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));\r
+-#1572=LINE('',#1571,#1570);\r
+-#1573=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1574=VECTOR('',#1573,1.5E0);\r
+-#1575=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));\r
+-#1576=LINE('',#1575,#1574);\r
+-#1577=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1578=VECTOR('',#1577,5.656854249492E0);\r
+-#1579=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));\r
+-#1580=LINE('',#1579,#1578);\r
+-#1581=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1582=VECTOR('',#1581,1.5E0);\r
+-#1583=CARTESIAN_POINT('',(0.E0,0.E0,2.8E1));\r
+-#1584=LINE('',#1583,#1582);\r
+-#1585=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1586=VECTOR('',#1585,5.656854249492E0);\r
+-#1587=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));\r
+-#1588=LINE('',#1587,#1586);\r
+-#1589=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1590=VECTOR('',#1589,1.5E0);\r
+-#1591=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));\r
+-#1592=LINE('',#1591,#1590);\r
+-#1593=CARTESIAN_POINT('',(2.5E1,0.E0,7.E0));\r
+-#1594=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1595=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1596=AXIS2_PLACEMENT_3D('',#1593,#1594,#1595);\r
+-#1598=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1599=VECTOR('',#1598,1.5E0);\r
+-#1600=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));\r
+-#1601=LINE('',#1600,#1599);\r
+-#1602=CARTESIAN_POINT('',(2.5E1,1.5E0,7.E0));\r
+-#1603=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1604=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1605=AXIS2_PLACEMENT_3D('',#1602,#1603,#1604);\r
+-#1607=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1608=VECTOR('',#1607,1.5E0);\r
+-#1609=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));\r
+-#1610=LINE('',#1609,#1608);\r
+-#1611=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1612=VECTOR('',#1611,5.656854249492E0);\r
+-#1613=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));\r
+-#1614=LINE('',#1613,#1612);\r
+-#1615=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1616=VECTOR('',#1615,1.5E0);\r
+-#1617=CARTESIAN_POINT('',(2.4E1,0.E0,4.E0));\r
+-#1618=LINE('',#1617,#1616);\r
+-#1619=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1620=VECTOR('',#1619,5.656854249492E0);\r
+-#1621=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));\r
+-#1622=LINE('',#1621,#1620);\r
+-#1623=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1624=VECTOR('',#1623,1.5E0);\r
+-#1625=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));\r
+-#1626=LINE('',#1625,#1624);\r
+-#1627=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1628=VECTOR('',#1627,5.656854249492E0);\r
+-#1629=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));\r
+-#1630=LINE('',#1629,#1628);\r
+-#1631=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1632=VECTOR('',#1631,1.5E0);\r
+-#1633=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));\r
+-#1634=LINE('',#1633,#1632);\r
+-#1635=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1636=VECTOR('',#1635,5.656854249492E0);\r
+-#1637=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));\r
+-#1638=LINE('',#1637,#1636);\r
+-#1639=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1640=VECTOR('',#1639,1.5E0);\r
+-#1641=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));\r
+-#1642=LINE('',#1641,#1640);\r
+-#1643=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1644=VECTOR('',#1643,7.071067811865E-1);\r
+-#1645=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));\r
+-#1646=LINE('',#1645,#1644);\r
+-#1647=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1648=VECTOR('',#1647,1.5E0);\r
+-#1649=CARTESIAN_POINT('',(2.6E1,1.5E0,1.175E1));\r
+-#1650=LINE('',#1649,#1648);\r
+-#1651=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1652=VECTOR('',#1651,7.071067811865E-1);\r
+-#1653=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));\r
+-#1654=LINE('',#1653,#1652);\r
+-#1655=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1656=VECTOR('',#1655,2.5E0);\r
+-#1657=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));\r
+-#1658=LINE('',#1657,#1656);\r
+-#1659=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1660=VECTOR('',#1659,2.E0);\r
+-#1661=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));\r
+-#1662=LINE('',#1661,#1660);\r
+-#1663=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1664=VECTOR('',#1663,2.E0);\r
+-#1665=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));\r
+-#1666=LINE('',#1665,#1664);\r
+-#1667=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1668=VECTOR('',#1667,2.E0);\r
+-#1669=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));\r
+-#1670=LINE('',#1669,#1668);\r
+-#1671=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));\r
+-#1672=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1673=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1674=AXIS2_PLACEMENT_3D('',#1671,#1672,#1673);\r
+-#1676=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));\r
+-#1677=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1678=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1679=AXIS2_PLACEMENT_3D('',#1676,#1677,#1678);\r
+-#1681=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));\r
+-#1682=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1683=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1684=AXIS2_PLACEMENT_3D('',#1681,#1682,#1683);\r
+-#1686=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));\r
+-#1687=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1688=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1689=AXIS2_PLACEMENT_3D('',#1686,#1687,#1688);\r
+-#1691=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1692=VECTOR('',#1691,2.E0);\r
+-#1693=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));\r
+-#1694=LINE('',#1693,#1692);\r
+-#1695=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1696=VECTOR('',#1695,1.E1);\r
+-#1697=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));\r
+-#1698=LINE('',#1697,#1696);\r
+-#1699=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1700=VECTOR('',#1699,1.5E0);\r
+-#1701=CARTESIAN_POINT('',(1.9E1,0.E0,1.1E1));\r
+-#1702=LINE('',#1701,#1700);\r
+-#1703=CARTESIAN_POINT('',(1.8E1,0.E0,1.1E1));\r
+-#1704=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1705=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1706=AXIS2_PLACEMENT_3D('',#1703,#1704,#1705);\r
+-#1708=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1709=VECTOR('',#1708,1.5E0);\r
+-#1710=CARTESIAN_POINT('',(1.8E1,0.E0,1.E1));\r
+-#1711=LINE('',#1710,#1709);\r
+-#1712=CARTESIAN_POINT('',(1.8E1,1.5E0,1.1E1));\r
+-#1713=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1714=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1715=AXIS2_PLACEMENT_3D('',#1712,#1713,#1714);\r
+-#1717=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1718=VECTOR('',#1717,1.2E1);\r
+-#1719=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));\r
+-#1720=LINE('',#1719,#1718);\r
+-#1721=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1722=VECTOR('',#1721,1.5E0);\r
+-#1723=CARTESIAN_POINT('',(5.E0,1.5E0,1.1E1));\r
+-#1724=LINE('',#1723,#1722);\r
+-#1725=CARTESIAN_POINT('',(6.E0,1.5E0,1.1E1));\r
+-#1726=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1727=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1728=AXIS2_PLACEMENT_3D('',#1725,#1726,#1727);\r
+-#1730=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1731=VECTOR('',#1730,1.5E0);\r
+-#1732=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));\r
+-#1733=LINE('',#1732,#1731);\r
+-#1734=CARTESIAN_POINT('',(6.E0,0.E0,1.1E1));\r
+-#1735=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1736=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#1737=AXIS2_PLACEMENT_3D('',#1734,#1735,#1736);\r
+-#1739=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1740=VECTOR('',#1739,2.E0);\r
+-#1741=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));\r
+-#1742=LINE('',#1741,#1740);\r
+-#1743=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1744=VECTOR('',#1743,1.E1);\r
+-#1745=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));\r
+-#1746=LINE('',#1745,#1744);\r
+-#1747=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1748=VECTOR('',#1747,1.5E0);\r
+-#1749=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));\r
+-#1750=LINE('',#1749,#1748);\r
+-#1751=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1752=VECTOR('',#1751,7.071067811865E-1);\r
+-#1753=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));\r
+-#1754=LINE('',#1753,#1752);\r
+-#1755=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1756=VECTOR('',#1755,1.5E0);\r
+-#1757=CARTESIAN_POINT('',(4.5E0,0.E0,1.225E1));\r
+-#1758=LINE('',#1757,#1756);\r
+-#1759=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#1760=VECTOR('',#1759,7.071067811865E-1);\r
+-#1761=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));\r
+-#1762=LINE('',#1761,#1760);\r
+-#1763=CARTESIAN_POINT('',(4.25E0,1.05E1,1.E1));\r
+-#1764=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1765=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1766=AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);\r
+-#1768=CARTESIAN_POINT('',(4.25E0,1.05E1,1.E1));\r
+-#1769=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1770=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1771=AXIS2_PLACEMENT_3D('',#1768,#1769,#1770);\r
+-#1773=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1774=VECTOR('',#1773,5.E0);\r
+-#1775=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.E1));\r
+-#1776=LINE('',#1775,#1774);\r
+-#1777=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1778=VECTOR('',#1777,1.E0);\r
+-#1779=CARTESIAN_POINT('',(-2.E0,2.5E0,1.E1));\r
+-#1780=LINE('',#1779,#1778);\r
+-#1781=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#1782=VECTOR('',#1781,1.029563014099E1);\r
+-#1783=CARTESIAN_POINT('',(3.E0,1.15E1,1.E1));\r
+-#1784=LINE('',#1783,#1782);\r
+-#1785=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1786=VECTOR('',#1785,2.E0);\r
+-#1787=CARTESIAN_POINT('',(5.E0,1.15E1,1.E1));\r
+-#1788=LINE('',#1787,#1786);\r
+-#1789=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1790=VECTOR('',#1789,1.E1);\r
+-#1791=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));\r
+-#1792=LINE('',#1791,#1790);\r
+-#1793=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1794=VECTOR('',#1793,5.E0);\r
+-#1795=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));\r
+-#1796=LINE('',#1795,#1794);\r
+-#1797=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1798=VECTOR('',#1797,1.75E0);\r
+-#1799=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));\r
+-#1800=LINE('',#1799,#1798);\r
+-#1801=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1802=VECTOR('',#1801,4.3E0);\r
+-#1803=CARTESIAN_POINT('',(2.5E0,6.65E0,1.E1));\r
+-#1804=LINE('',#1803,#1802);\r
+-#1805=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1806=VECTOR('',#1805,1.3E0);\r
+-#1807=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));\r
+-#1808=LINE('',#1807,#1806);\r
+-#1809=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1810=VECTOR('',#1809,6.8E0);\r
+-#1811=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));\r
+-#1812=LINE('',#1811,#1810);\r
+-#1813=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1814=VECTOR('',#1813,1.197200760546E0);\r
+-#1815=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));\r
+-#1816=LINE('',#1815,#1814);\r
+-#1817=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#1818=VECTOR('',#1817,2.059126028197E0);\r
+-#1819=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));\r
+-#1820=LINE('',#1819,#1818);\r
+-#1821=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1822=VECTOR('',#1821,1.972007605460E-1);\r
+-#1823=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));\r
+-#1824=LINE('',#1823,#1822);\r
+-#1825=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1826=VECTOR('',#1825,2.E0);\r
+-#1827=CARTESIAN_POINT('',(4.4125E0,1.05E1,8.E0));\r
+-#1828=LINE('',#1827,#1826);\r
+-#1829=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1830=VECTOR('',#1829,2.E0);\r
+-#1831=CARTESIAN_POINT('',(4.0875E0,1.05E1,8.E0));\r
+-#1832=LINE('',#1831,#1830);\r
+-#1833=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#1834=VECTOR('',#1833,5.773502691896E0);\r
+-#1835=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));\r
+-#1836=LINE('',#1835,#1834);\r
+-#1837=CARTESIAN_POINT('',(8.675E-1,3.035898384862E0,1.2E1));\r
+-#1838=CARTESIAN_POINT('',(8.675E-1,2.930774450068E0,1.206069333205E1));\r
+-#1839=CARTESIAN_POINT('',(9.058386382037E-1,2.745461691651E0,1.216768370301E1));\r
+-#1840=CARTESIAN_POINT('',(1.029862281194E0,2.608885438662E0,1.224653603944E1));\r
+-#1841=CARTESIAN_POINT('',(1.125E0,2.580400233539E0,1.226298198028E1));\r
+-#1842=CARTESIAN_POINT('',(1.220137718806E0,2.608885438662E0,1.224653603944E1));\r
+-#1843=CARTESIAN_POINT('',(1.344161361796E0,2.745461691651E0,1.216768370301E1));\r
+-#1844=CARTESIAN_POINT('',(1.3825E0,2.930774450068E0,1.206069333205E1));\r
+-#1845=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));\r
+-#1847=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));\r
+-#1848=CARTESIAN_POINT('',(1.3825E0,3.141022319657E0,1.193930666795E1));\r
+-#1849=CARTESIAN_POINT('',(1.344161361796E0,3.326335078073E0,1.183231629699E1));\r
+-#1850=CARTESIAN_POINT('',(1.220137718806E0,3.462911331062E0,1.175346396056E1));\r
+-#1851=CARTESIAN_POINT('',(1.125E0,3.491396536186E0,1.173701801972E1));\r
+-#1852=CARTESIAN_POINT('',(1.029862281194E0,3.462911331062E0,1.175346396056E1));\r
+-#1853=CARTESIAN_POINT('',(9.058386382037E-1,3.326335078073E0,1.183231629699E1));\r
+-#1854=CARTESIAN_POINT('',(8.675E-1,3.141022319657E0,1.193930666795E1));\r
+-#1855=CARTESIAN_POINT('',(8.675E-1,3.035898384862E0,1.2E1));\r
+-#1857=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#1858=VECTOR('',#1857,5.773502691896E0);\r
+-#1859=CARTESIAN_POINT('',(2.E0,6.5E0,1.E1));\r
+-#1860=LINE('',#1859,#1858);\r
+-#1861=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1862=VECTOR('',#1861,2.035898384862E0);\r
+-#1863=CARTESIAN_POINT('',(8.675E-1,1.E0,1.2E1));\r
+-#1864=LINE('',#1863,#1862);\r
+-#1865=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1866=VECTOR('',#1865,2.035898384862E0);\r
+-#1867=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));\r
+-#1868=LINE('',#1867,#1866);\r
+-#1869=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));\r
+-#1870=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1871=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1872=AXIS2_PLACEMENT_3D('',#1869,#1870,#1871);\r
+-#1874=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));\r
+-#1875=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1876=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1877=AXIS2_PLACEMENT_3D('',#1874,#1875,#1876);\r
+-#1879=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));\r
+-#1880=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1881=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1882=AXIS2_PLACEMENT_3D('',#1879,#1880,#1881);\r
+-#1884=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));\r
+-#1885=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1886=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1887=AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);\r
+-#1889=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1890=VECTOR('',#1889,1.E0);\r
+-#1891=CARTESIAN_POINT('',(1.3175E0,1.E0,1.2E1));\r
+-#1892=LINE('',#1891,#1890);\r
+-#1893=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1894=VECTOR('',#1893,1.E0);\r
+-#1895=CARTESIAN_POINT('',(9.325E-1,1.E0,1.2E1));\r
+-#1896=LINE('',#1895,#1894);\r
+-#1897=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1898=VECTOR('',#1897,2.5E0);\r
+-#1899=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));\r
+-#1900=LINE('',#1899,#1898);\r
+-#1901=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1902=VECTOR('',#1901,2.E0);\r
+-#1903=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));\r
+-#1904=LINE('',#1903,#1902);\r
+-#1905=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1906=VECTOR('',#1905,1.5E0);\r
+-#1907=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));\r
+-#1908=LINE('',#1907,#1906);\r
+-#1909=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1910=VECTOR('',#1909,7.071067811865E-1);\r
+-#1911=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));\r
+-#1912=LINE('',#1911,#1910);\r
+-#1913=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#1914=VECTOR('',#1913,1.5E0);\r
+-#1915=CARTESIAN_POINT('',(-2.E0,0.E0,1.175E1));\r
+-#1916=LINE('',#1915,#1914);\r
+-#1917=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#1918=VECTOR('',#1917,7.071067811865E-1);\r
+-#1919=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));\r
+-#1920=LINE('',#1919,#1918);\r
+-#1921=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1922=VECTOR('',#1921,2.E0);\r
+-#1923=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));\r
+-#1924=LINE('',#1923,#1922);\r
+-#1925=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1926=VECTOR('',#1925,2.E0);\r
+-#1927=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));\r
+-#1928=LINE('',#1927,#1926);\r
+-#1929=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));\r
+-#1930=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1931=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1932=AXIS2_PLACEMENT_3D('',#1929,#1930,#1931);\r
+-#1934=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));\r
+-#1935=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1936=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1937=AXIS2_PLACEMENT_3D('',#1934,#1935,#1936);\r
+-#1939=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));\r
+-#1940=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1941=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1942=AXIS2_PLACEMENT_3D('',#1939,#1940,#1941);\r
+-#1944=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));\r
+-#1945=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1946=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1947=AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);\r
+-#1949=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1950=VECTOR('',#1949,3.75E-1);\r
+-#1951=CARTESIAN_POINT('',(4.095E0,1.15E1,9.E0));\r
+-#1952=LINE('',#1951,#1950);\r
+-#1953=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1954=VECTOR('',#1953,3.75E-1);\r
+-#1955=CARTESIAN_POINT('',(3.905E0,1.15E1,9.E0));\r
+-#1956=LINE('',#1955,#1954);\r
+-#1957=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));\r
+-#1958=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1959=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1960=AXIS2_PLACEMENT_3D('',#1957,#1958,#1959);\r
+-#1962=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));\r
+-#1963=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1964=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1965=AXIS2_PLACEMENT_3D('',#1962,#1963,#1964);\r
+-#1967=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1968=VECTOR('',#1967,2.5E-1);\r
+-#1969=CARTESIAN_POINT('',(3.929917478528E0,1.15E1,9.132582521472E0));\r
+-#1970=LINE('',#1969,#1968);\r
+-#1971=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1972=VECTOR('',#1971,2.5E-1);\r
+-#1973=CARTESIAN_POINT('',(3.804917478528E0,1.15E1,9.132582521472E0));\r
+-#1974=LINE('',#1973,#1972);\r
+-#1975=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));\r
+-#1976=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1977=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1978=AXIS2_PLACEMENT_3D('',#1975,#1976,#1977);\r
+-#1980=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));\r
+-#1981=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#1982=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#1983=AXIS2_PLACEMENT_3D('',#1980,#1981,#1982);\r
+-#1985=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1986=VECTOR('',#1985,5.E-1);\r
+-#1987=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));\r
+-#1988=LINE('',#1987,#1986);\r
+-#1989=CARTESIAN_POINT('',(2.15E0,6.65E0,1.E1));\r
+-#1990=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1991=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#1992=AXIS2_PLACEMENT_3D('',#1989,#1990,#1991);\r
+-#1994=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#1995=VECTOR('',#1994,5.E-1);\r
+-#1996=CARTESIAN_POINT('',(2.15E0,7.E0,9.5E0));\r
+-#1997=LINE('',#1996,#1995);\r
+-#1998=CARTESIAN_POINT('',(2.15E0,6.65E0,9.5E0));\r
+-#1999=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2000=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2001=AXIS2_PLACEMENT_3D('',#1998,#1999,#2000);\r
+-#2003=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2004=VECTOR('',#2003,4.3E0);\r
+-#2005=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));\r
+-#2006=LINE('',#2005,#2004);\r
+-#2007=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2008=VECTOR('',#2007,1.972007605460E-1);\r
+-#2009=CARTESIAN_POINT('',(1.952799239454E0,7.E0,9.5E0));\r
+-#2010=LINE('',#2009,#2008);\r
+-#2011=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#2012=VECTOR('',#2011,2.059126028197E0);\r
+-#2013=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,9.5E0));\r
+-#2014=LINE('',#2013,#2012);\r
+-#2015=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2016=VECTOR('',#2015,1.197200760546E0);\r
+-#2017=CARTESIAN_POINT('',(4.15E0,9.5E0,9.5E0));\r
+-#2018=LINE('',#2017,#2016);\r
+-#2019=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2020=VECTOR('',#2019,6.8E0);\r
+-#2021=CARTESIAN_POINT('',(4.5E0,2.35E0,9.5E0));\r
+-#2022=LINE('',#2021,#2020);\r
+-#2023=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2024=VECTOR('',#2023,1.3E0);\r
+-#2025=CARTESIAN_POINT('',(2.85E0,2.E0,9.5E0));\r
+-#2026=LINE('',#2025,#2024);\r
+-#2027=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2028=VECTOR('',#2027,5.E-1);\r
+-#2029=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));\r
+-#2030=LINE('',#2029,#2028);\r
+-#2031=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,1.E1));\r
+-#2032=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2033=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2034=AXIS2_PLACEMENT_3D('',#2031,#2032,#2033);\r
+-#2036=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2037=VECTOR('',#2036,5.E-1);\r
+-#2038=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,1.E1));\r
+-#2039=LINE('',#2038,#2037);\r
+-#2040=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,9.5E0));\r
+-#2041=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2042=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#2043=AXIS2_PLACEMENT_3D('',#2040,#2041,#2042);\r
+-#2045=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2046=VECTOR('',#2045,5.E-1);\r
+-#2047=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));\r
+-#2048=LINE('',#2047,#2046);\r
+-#2049=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,1.E1));\r
+-#2050=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2051=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#2052=AXIS2_PLACEMENT_3D('',#2049,#2050,#2051);\r
+-#2054=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2055=VECTOR('',#2054,5.E-1);\r
+-#2056=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,1.E1));\r
+-#2057=LINE('',#2056,#2055);\r
+-#2058=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,9.5E0));\r
+-#2059=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2060=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2061=AXIS2_PLACEMENT_3D('',#2058,#2059,#2060);\r
+-#2063=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2064=VECTOR('',#2063,5.E-1);\r
+-#2065=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));\r
+-#2066=LINE('',#2065,#2064);\r
+-#2067=CARTESIAN_POINT('',(4.15E0,9.15E0,1.E1));\r
+-#2068=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2069=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2070=AXIS2_PLACEMENT_3D('',#2067,#2068,#2069);\r
+-#2072=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2073=VECTOR('',#2072,5.E-1);\r
+-#2074=CARTESIAN_POINT('',(4.5E0,9.15E0,1.E1));\r
+-#2075=LINE('',#2074,#2073);\r
+-#2076=CARTESIAN_POINT('',(4.15E0,9.15E0,9.5E0));\r
+-#2077=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2078=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2079=AXIS2_PLACEMENT_3D('',#2076,#2077,#2078);\r
+-#2081=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2082=VECTOR('',#2081,5.E-1);\r
+-#2083=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));\r
+-#2084=LINE('',#2083,#2082);\r
+-#2085=CARTESIAN_POINT('',(4.15E0,2.35E0,1.E1));\r
+-#2086=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2087=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2088=AXIS2_PLACEMENT_3D('',#2085,#2086,#2087);\r
+-#2090=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2091=VECTOR('',#2090,5.E-1);\r
+-#2092=CARTESIAN_POINT('',(4.15E0,2.E0,1.E1));\r
+-#2093=LINE('',#2092,#2091);\r
+-#2094=CARTESIAN_POINT('',(4.15E0,2.35E0,9.5E0));\r
+-#2095=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2096=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2097=AXIS2_PLACEMENT_3D('',#2094,#2095,#2096);\r
+-#2099=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2100=VECTOR('',#2099,5.E-1);\r
+-#2101=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));\r
+-#2102=LINE('',#2101,#2100);\r
+-#2103=CARTESIAN_POINT('',(2.85E0,2.35E0,1.E1));\r
+-#2104=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2105=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2106=AXIS2_PLACEMENT_3D('',#2103,#2104,#2105);\r
+-#2108=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2109=VECTOR('',#2108,5.E-1);\r
+-#2110=CARTESIAN_POINT('',(2.5E0,2.35E0,1.E1));\r
+-#2111=LINE('',#2110,#2109);\r
+-#2112=CARTESIAN_POINT('',(2.85E0,2.35E0,9.5E0));\r
+-#2113=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2114=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2115=AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);\r
+-#2117=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2118=VECTOR('',#2117,1.5E0);\r
+-#2119=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));\r
+-#2120=LINE('',#2119,#2118);\r
+-#2121=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#2122=VECTOR('',#2121,7.071067811865E-1);\r
+-#2123=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));\r
+-#2124=LINE('',#2123,#2122);\r
+-#2125=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2126=VECTOR('',#2125,1.5E0);\r
+-#2127=CARTESIAN_POINT('',(1.95E1,1.5E0,1.225E1));\r
+-#2128=LINE('',#2127,#2126);\r
+-#2129=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#2130=VECTOR('',#2129,7.071067811865E-1);\r
+-#2131=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));\r
+-#2132=LINE('',#2131,#2130);\r
+-#2133=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2134=VECTOR('',#2133,3.75E-1);\r
+-#2135=CARTESIAN_POINT('',(1.9905E1,1.15E1,9.E0));\r
+-#2136=LINE('',#2135,#2134);\r
+-#2137=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2138=VECTOR('',#2137,3.75E-1);\r
+-#2139=CARTESIAN_POINT('',(2.0095E1,1.15E1,9.E0));\r
+-#2140=LINE('',#2139,#2138);\r
+-#2141=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));\r
+-#2142=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2143=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2144=AXIS2_PLACEMENT_3D('',#2141,#2142,#2143);\r
+-#2146=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));\r
+-#2147=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2148=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2149=AXIS2_PLACEMENT_3D('',#2146,#2147,#2148);\r
+-#2151=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2152=VECTOR('',#2151,2.5E-1);\r
+-#2153=CARTESIAN_POINT('',(2.007008252147E1,1.15E1,9.132582521472E0));\r
+-#2154=LINE('',#2153,#2152);\r
+-#2155=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2156=VECTOR('',#2155,2.5E-1);\r
+-#2157=CARTESIAN_POINT('',(2.019508252147E1,1.15E1,9.132582521472E0));\r
+-#2158=LINE('',#2157,#2156);\r
+-#2159=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));\r
+-#2160=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2161=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2162=AXIS2_PLACEMENT_3D('',#2159,#2160,#2161);\r
+-#2164=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));\r
+-#2165=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2166=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2167=AXIS2_PLACEMENT_3D('',#2164,#2165,#2166);\r
+-#2169=DIRECTION('',(1.421085471520E-14,1.E0,0.E0));\r
+-#2170=VECTOR('',#2169,2.5E-1);\r
+-#2171=CARTESIAN_POINT('',(1.745E1,1.25E0,2.975E1));\r
+-#2172=LINE('',#2171,#2170);\r
+-#2173=DIRECTION('',(-1.421085471520E-14,1.E0,0.E0));\r
+-#2174=VECTOR('',#2173,2.5E-1);\r
+-#2175=CARTESIAN_POINT('',(1.765E1,1.25E0,2.975E1));\r
+-#2176=LINE('',#2175,#2174);\r
+-#2177=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));\r
+-#2178=VECTOR('',#2177,1.154700538379E-1);\r
+-#2179=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));\r
+-#2180=LINE('',#2179,#2178);\r
+-#2181=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));\r
+-#2182=VECTOR('',#2181,1.154700538379E-1);\r
+-#2183=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));\r
+-#2184=LINE('',#2183,#2182);\r
+-#2185=CARTESIAN_POINT('',(1.755E1,1.25E0,2.975E1));\r
+-#2186=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2187=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2188=AXIS2_PLACEMENT_3D('',#2185,#2186,#2187);\r
+-#2190=CARTESIAN_POINT('',(1.755E1,1.25E0,2.975E1));\r
+-#2191=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2192=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2193=AXIS2_PLACEMENT_3D('',#2190,#2191,#2192);\r
+-#2195=DIRECTION('',(1.421085471520E-14,1.E0,0.E0));\r
+-#2196=VECTOR('',#2195,2.5E-1);\r
+-#2197=CARTESIAN_POINT('',(1.645E1,1.25E0,2.975E1));\r
+-#2198=LINE('',#2197,#2196);\r
+-#2199=DIRECTION('',(-1.421085471520E-14,1.E0,0.E0));\r
+-#2200=VECTOR('',#2199,2.5E-1);\r
+-#2201=CARTESIAN_POINT('',(1.665E1,1.25E0,2.975E1));\r
+-#2202=LINE('',#2201,#2200);\r
+-#2203=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));\r
+-#2204=VECTOR('',#2203,1.154700538379E-1);\r
+-#2205=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));\r
+-#2206=LINE('',#2205,#2204);\r
+-#2207=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));\r
+-#2208=VECTOR('',#2207,1.154700538379E-1);\r
+-#2209=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));\r
+-#2210=LINE('',#2209,#2208);\r
+-#2211=CARTESIAN_POINT('',(1.655E1,1.25E0,2.975E1));\r
+-#2212=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2213=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2214=AXIS2_PLACEMENT_3D('',#2211,#2212,#2213);\r
+-#2216=CARTESIAN_POINT('',(1.655E1,1.25E0,2.975E1));\r
+-#2217=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2218=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2219=AXIS2_PLACEMENT_3D('',#2216,#2217,#2218);\r
+-#2221=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2222=VECTOR('',#2221,5.E-1);\r
+-#2223=CARTESIAN_POINT('',(1.3825E0,1.5E0,6.E0));\r
+-#2224=LINE('',#2223,#2222);\r
+-#2225=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2226=VECTOR('',#2225,5.E-1);\r
+-#2227=CARTESIAN_POINT('',(8.675E-1,1.5E0,6.E0));\r
+-#2228=LINE('',#2227,#2226);\r
+-#2229=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));\r
+-#2230=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2231=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2232=AXIS2_PLACEMENT_3D('',#2229,#2230,#2231);\r
+-#2234=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));\r
+-#2235=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2236=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2237=AXIS2_PLACEMENT_3D('',#2234,#2235,#2236);\r
+-#2239=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));\r
+-#2240=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2241=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2242=AXIS2_PLACEMENT_3D('',#2239,#2240,#2241);\r
+-#2244=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));\r
+-#2245=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2246=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2247=AXIS2_PLACEMENT_3D('',#2244,#2245,#2246);\r
+-#2249=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2250=VECTOR('',#2249,1.E0);\r
+-#2251=CARTESIAN_POINT('',(1.3175E0,1.E0,6.E0));\r
+-#2252=LINE('',#2251,#2250);\r
+-#2253=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2254=VECTOR('',#2253,1.E0);\r
+-#2255=CARTESIAN_POINT('',(9.325E-1,1.E0,6.E0));\r
+-#2256=LINE('',#2255,#2254);\r
+-#2257=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2258=VECTOR('',#2257,5.E-1);\r
+-#2259=CARTESIAN_POINT('',(1.3825E0,1.5E0,1.8E1));\r
+-#2260=LINE('',#2259,#2258);\r
+-#2261=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2262=VECTOR('',#2261,5.E-1);\r
+-#2263=CARTESIAN_POINT('',(8.675E-1,1.5E0,1.8E1));\r
+-#2264=LINE('',#2263,#2262);\r
+-#2265=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));\r
+-#2266=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2267=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2268=AXIS2_PLACEMENT_3D('',#2265,#2266,#2267);\r
+-#2270=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));\r
+-#2271=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2272=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2273=AXIS2_PLACEMENT_3D('',#2270,#2271,#2272);\r
+-#2275=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));\r
+-#2276=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2277=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2278=AXIS2_PLACEMENT_3D('',#2275,#2276,#2277);\r
+-#2280=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));\r
+-#2281=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2282=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2283=AXIS2_PLACEMENT_3D('',#2280,#2281,#2282);\r
+-#2285=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2286=VECTOR('',#2285,1.E0);\r
+-#2287=CARTESIAN_POINT('',(1.3175E0,1.E0,1.8E1));\r
+-#2288=LINE('',#2287,#2286);\r
+-#2289=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2290=VECTOR('',#2289,1.E0);\r
+-#2291=CARTESIAN_POINT('',(9.325E-1,1.E0,1.8E1));\r
+-#2292=LINE('',#2291,#2290);\r
+-#2293=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2294=VECTOR('',#2293,5.E-1);\r
+-#2295=CARTESIAN_POINT('',(1.3825E0,1.5E0,2.4E1));\r
+-#2296=LINE('',#2295,#2294);\r
+-#2297=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2298=VECTOR('',#2297,5.E-1);\r
+-#2299=CARTESIAN_POINT('',(8.675E-1,1.5E0,2.4E1));\r
+-#2300=LINE('',#2299,#2298);\r
+-#2301=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));\r
+-#2302=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2303=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2304=AXIS2_PLACEMENT_3D('',#2301,#2302,#2303);\r
+-#2306=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));\r
+-#2307=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2308=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2309=AXIS2_PLACEMENT_3D('',#2306,#2307,#2308);\r
+-#2311=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));\r
+-#2312=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2313=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2314=AXIS2_PLACEMENT_3D('',#2311,#2312,#2313);\r
+-#2316=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));\r
+-#2317=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2318=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2319=AXIS2_PLACEMENT_3D('',#2316,#2317,#2318);\r
+-#2321=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2322=VECTOR('',#2321,1.E0);\r
+-#2323=CARTESIAN_POINT('',(1.3175E0,1.E0,2.4E1));\r
+-#2324=LINE('',#2323,#2322);\r
+-#2325=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2326=VECTOR('',#2325,1.E0);\r
+-#2327=CARTESIAN_POINT('',(9.325E-1,1.E0,2.4E1));\r
+-#2328=LINE('',#2327,#2326);\r
+-#2329=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2330=VECTOR('',#2329,5.E-1);\r
+-#2331=CARTESIAN_POINT('',(2.31325E1,1.5E0,6.E0));\r
+-#2332=LINE('',#2331,#2330);\r
+-#2333=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2334=VECTOR('',#2333,5.E-1);\r
+-#2335=CARTESIAN_POINT('',(2.26175E1,1.5E0,6.E0));\r
+-#2336=LINE('',#2335,#2334);\r
+-#2337=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));\r
+-#2338=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2339=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2340=AXIS2_PLACEMENT_3D('',#2337,#2338,#2339);\r
+-#2342=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));\r
+-#2343=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2344=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2345=AXIS2_PLACEMENT_3D('',#2342,#2343,#2344);\r
+-#2347=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));\r
+-#2348=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2349=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2350=AXIS2_PLACEMENT_3D('',#2347,#2348,#2349);\r
+-#2352=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));\r
+-#2353=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2354=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2355=AXIS2_PLACEMENT_3D('',#2352,#2353,#2354);\r
+-#2357=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2358=VECTOR('',#2357,1.E0);\r
+-#2359=CARTESIAN_POINT('',(2.30675E1,1.E0,6.E0));\r
+-#2360=LINE('',#2359,#2358);\r
+-#2361=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2362=VECTOR('',#2361,1.E0);\r
+-#2363=CARTESIAN_POINT('',(2.26825E1,1.E0,6.E0));\r
+-#2364=LINE('',#2363,#2362);\r
+-#2365=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2366=VECTOR('',#2365,5.E-1);\r
+-#2367=CARTESIAN_POINT('',(2.31325E1,1.5E0,1.8E1));\r
+-#2368=LINE('',#2367,#2366);\r
+-#2369=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2370=VECTOR('',#2369,5.E-1);\r
+-#2371=CARTESIAN_POINT('',(2.26175E1,1.5E0,1.8E1));\r
+-#2372=LINE('',#2371,#2370);\r
+-#2373=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));\r
+-#2374=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2375=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2376=AXIS2_PLACEMENT_3D('',#2373,#2374,#2375);\r
+-#2378=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));\r
+-#2379=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2380=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2381=AXIS2_PLACEMENT_3D('',#2378,#2379,#2380);\r
+-#2383=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));\r
+-#2384=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2385=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2386=AXIS2_PLACEMENT_3D('',#2383,#2384,#2385);\r
+-#2388=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));\r
+-#2389=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2390=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2391=AXIS2_PLACEMENT_3D('',#2388,#2389,#2390);\r
+-#2393=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2394=VECTOR('',#2393,1.E0);\r
+-#2395=CARTESIAN_POINT('',(2.30675E1,1.E0,1.8E1));\r
+-#2396=LINE('',#2395,#2394);\r
+-#2397=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2398=VECTOR('',#2397,1.E0);\r
+-#2399=CARTESIAN_POINT('',(2.26825E1,1.E0,1.8E1));\r
+-#2400=LINE('',#2399,#2398);\r
+-#2401=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2402=VECTOR('',#2401,5.E-1);\r
+-#2403=CARTESIAN_POINT('',(2.31325E1,1.5E0,2.4E1));\r
+-#2404=LINE('',#2403,#2402);\r
+-#2405=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2406=VECTOR('',#2405,5.E-1);\r
+-#2407=CARTESIAN_POINT('',(2.26175E1,1.5E0,2.4E1));\r
+-#2408=LINE('',#2407,#2406);\r
+-#2409=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));\r
+-#2410=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2411=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2412=AXIS2_PLACEMENT_3D('',#2409,#2410,#2411);\r
+-#2414=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));\r
+-#2415=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2416=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2417=AXIS2_PLACEMENT_3D('',#2414,#2415,#2416);\r
+-#2419=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));\r
+-#2420=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2421=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2422=AXIS2_PLACEMENT_3D('',#2419,#2420,#2421);\r
+-#2424=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));\r
+-#2425=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2426=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2427=AXIS2_PLACEMENT_3D('',#2424,#2425,#2426);\r
+-#2429=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2430=VECTOR('',#2429,1.E0);\r
+-#2431=CARTESIAN_POINT('',(2.30675E1,1.E0,2.4E1));\r
+-#2432=LINE('',#2431,#2430);\r
+-#2433=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2434=VECTOR('',#2433,1.E0);\r
+-#2435=CARTESIAN_POINT('',(2.26825E1,1.E0,2.4E1));\r
+-#2436=LINE('',#2435,#2434);\r
+-#2437=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2438=VECTOR('',#2437,5.E-1);\r
+-#2439=CARTESIAN_POINT('',(6.256E0,1.5E0,1.25E0));\r
+-#2440=LINE('',#2439,#2438);\r
+-#2441=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2442=VECTOR('',#2441,5.E-1);\r
+-#2443=CARTESIAN_POINT('',(5.744E0,1.5E0,1.25E0));\r
+-#2444=LINE('',#2443,#2442);\r
+-#2445=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));\r
+-#2446=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2447=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2448=AXIS2_PLACEMENT_3D('',#2445,#2446,#2447);\r
+-#2450=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));\r
+-#2451=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2452=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2453=AXIS2_PLACEMENT_3D('',#2450,#2451,#2452);\r
+-#2455=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));\r
+-#2456=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2457=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2458=AXIS2_PLACEMENT_3D('',#2455,#2456,#2457);\r
+-#2460=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));\r
+-#2461=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2462=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2463=AXIS2_PLACEMENT_3D('',#2460,#2461,#2462);\r
+-#2465=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2466=VECTOR('',#2465,1.E0);\r
+-#2467=CARTESIAN_POINT('',(6.1925E0,1.E0,1.25E0));\r
+-#2468=LINE('',#2467,#2466);\r
+-#2469=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2470=VECTOR('',#2469,1.E0);\r
+-#2471=CARTESIAN_POINT('',(5.8075E0,1.E0,1.25E0));\r
+-#2472=LINE('',#2471,#2470);\r
+-#2473=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2474=VECTOR('',#2473,5.E-1);\r
+-#2475=CARTESIAN_POINT('',(1.2256E1,1.5E0,1.25E0));\r
+-#2476=LINE('',#2475,#2474);\r
+-#2477=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2478=VECTOR('',#2477,5.E-1);\r
+-#2479=CARTESIAN_POINT('',(1.1744E1,1.5E0,1.25E0));\r
+-#2480=LINE('',#2479,#2478);\r
+-#2481=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));\r
+-#2482=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2483=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2484=AXIS2_PLACEMENT_3D('',#2481,#2482,#2483);\r
+-#2486=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));\r
+-#2487=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2488=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2489=AXIS2_PLACEMENT_3D('',#2486,#2487,#2488);\r
+-#2491=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));\r
+-#2492=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2493=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2494=AXIS2_PLACEMENT_3D('',#2491,#2492,#2493);\r
+-#2496=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));\r
+-#2497=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2498=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2499=AXIS2_PLACEMENT_3D('',#2496,#2497,#2498);\r
+-#2501=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2502=VECTOR('',#2501,1.E0);\r
+-#2503=CARTESIAN_POINT('',(1.21925E1,1.E0,1.25E0));\r
+-#2504=LINE('',#2503,#2502);\r
+-#2505=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2506=VECTOR('',#2505,1.E0);\r
+-#2507=CARTESIAN_POINT('',(1.18075E1,1.E0,1.25E0));\r
+-#2508=LINE('',#2507,#2506);\r
+-#2509=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2510=VECTOR('',#2509,5.E-1);\r
+-#2511=CARTESIAN_POINT('',(1.8256E1,1.5E0,1.25E0));\r
+-#2512=LINE('',#2511,#2510);\r
+-#2513=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2514=VECTOR('',#2513,5.E-1);\r
+-#2515=CARTESIAN_POINT('',(1.7744E1,1.5E0,1.25E0));\r
+-#2516=LINE('',#2515,#2514);\r
+-#2517=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));\r
+-#2518=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2519=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2520=AXIS2_PLACEMENT_3D('',#2517,#2518,#2519);\r
+-#2522=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));\r
+-#2523=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2524=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2525=AXIS2_PLACEMENT_3D('',#2522,#2523,#2524);\r
+-#2527=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));\r
+-#2528=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2529=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2530=AXIS2_PLACEMENT_3D('',#2527,#2528,#2529);\r
+-#2532=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));\r
+-#2533=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2534=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2535=AXIS2_PLACEMENT_3D('',#2532,#2533,#2534);\r
+-#2537=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2538=VECTOR('',#2537,1.E0);\r
+-#2539=CARTESIAN_POINT('',(1.81925E1,1.E0,1.25E0));\r
+-#2540=LINE('',#2539,#2538);\r
+-#2541=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2542=VECTOR('',#2541,1.E0);\r
+-#2543=CARTESIAN_POINT('',(1.78075E1,1.E0,1.25E0));\r
+-#2544=LINE('',#2543,#2542);\r
+-#2545=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2546=VECTOR('',#2545,5.E-1);\r
+-#2547=CARTESIAN_POINT('',(6.256E0,1.5E0,3.075E1));\r
+-#2548=LINE('',#2547,#2546);\r
+-#2549=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2550=VECTOR('',#2549,5.E-1);\r
+-#2551=CARTESIAN_POINT('',(5.744E0,1.5E0,3.075E1));\r
+-#2552=LINE('',#2551,#2550);\r
+-#2553=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));\r
+-#2554=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2555=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2556=AXIS2_PLACEMENT_3D('',#2553,#2554,#2555);\r
+-#2558=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));\r
+-#2559=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2560=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2561=AXIS2_PLACEMENT_3D('',#2558,#2559,#2560);\r
+-#2563=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));\r
+-#2564=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2565=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2566=AXIS2_PLACEMENT_3D('',#2563,#2564,#2565);\r
+-#2568=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));\r
+-#2569=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2570=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2571=AXIS2_PLACEMENT_3D('',#2568,#2569,#2570);\r
+-#2573=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2574=VECTOR('',#2573,1.E0);\r
+-#2575=CARTESIAN_POINT('',(6.1925E0,1.E0,3.075E1));\r
+-#2576=LINE('',#2575,#2574);\r
+-#2577=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2578=VECTOR('',#2577,1.E0);\r
+-#2579=CARTESIAN_POINT('',(5.8075E0,1.E0,3.075E1));\r
+-#2580=LINE('',#2579,#2578);\r
+-#2581=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2582=VECTOR('',#2581,5.E-1);\r
+-#2583=CARTESIAN_POINT('',(1.2256E1,1.5E0,3.075E1));\r
+-#2584=LINE('',#2583,#2582);\r
+-#2585=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2586=VECTOR('',#2585,5.E-1);\r
+-#2587=CARTESIAN_POINT('',(1.1744E1,1.5E0,3.075E1));\r
+-#2588=LINE('',#2587,#2586);\r
+-#2589=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));\r
+-#2590=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2591=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2592=AXIS2_PLACEMENT_3D('',#2589,#2590,#2591);\r
+-#2594=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));\r
+-#2595=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2596=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2597=AXIS2_PLACEMENT_3D('',#2594,#2595,#2596);\r
+-#2599=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));\r
+-#2600=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2601=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2602=AXIS2_PLACEMENT_3D('',#2599,#2600,#2601);\r
+-#2604=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));\r
+-#2605=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2606=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2607=AXIS2_PLACEMENT_3D('',#2604,#2605,#2606);\r
+-#2609=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2610=VECTOR('',#2609,1.E0);\r
+-#2611=CARTESIAN_POINT('',(1.21925E1,1.E0,3.075E1));\r
+-#2612=LINE('',#2611,#2610);\r
+-#2613=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2614=VECTOR('',#2613,1.E0);\r
+-#2615=CARTESIAN_POINT('',(1.18075E1,1.E0,3.075E1));\r
+-#2616=LINE('',#2615,#2614);\r
+-#2617=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2618=VECTOR('',#2617,5.E-1);\r
+-#2619=CARTESIAN_POINT('',(1.8256E1,1.5E0,3.075E1));\r
+-#2620=LINE('',#2619,#2618);\r
+-#2621=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2622=VECTOR('',#2621,5.E-1);\r
+-#2623=CARTESIAN_POINT('',(1.7744E1,1.5E0,3.075E1));\r
+-#2624=LINE('',#2623,#2622);\r
+-#2625=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));\r
+-#2626=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2627=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2628=AXIS2_PLACEMENT_3D('',#2625,#2626,#2627);\r
+-#2630=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));\r
+-#2631=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2632=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2633=AXIS2_PLACEMENT_3D('',#2630,#2631,#2632);\r
+-#2635=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));\r
+-#2636=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2637=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2638=AXIS2_PLACEMENT_3D('',#2635,#2636,#2637);\r
+-#2640=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));\r
+-#2641=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2642=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2643=AXIS2_PLACEMENT_3D('',#2640,#2641,#2642);\r
+-#2645=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2646=VECTOR('',#2645,1.E0);\r
+-#2647=CARTESIAN_POINT('',(1.81925E1,1.E0,3.075E1));\r
+-#2648=LINE('',#2647,#2646);\r
+-#2649=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2650=VECTOR('',#2649,1.E0);\r
+-#2651=CARTESIAN_POINT('',(1.78075E1,1.E0,3.075E1));\r
+-#2652=LINE('',#2651,#2650);\r
+-#2653=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2654=VECTOR('',#2653,5.E-1);\r
+-#2655=CARTESIAN_POINT('',(6.2575E0,1.5E0,9.E0));\r
+-#2656=LINE('',#2655,#2654);\r
+-#2657=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2658=VECTOR('',#2657,5.E-1);\r
+-#2659=CARTESIAN_POINT('',(5.7425E0,1.5E0,9.E0));\r
+-#2660=LINE('',#2659,#2658);\r
+-#2661=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));\r
+-#2662=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2663=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2664=AXIS2_PLACEMENT_3D('',#2661,#2662,#2663);\r
+-#2666=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));\r
+-#2667=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2668=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2669=AXIS2_PLACEMENT_3D('',#2666,#2667,#2668);\r
+-#2671=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));\r
+-#2672=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2673=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2674=AXIS2_PLACEMENT_3D('',#2671,#2672,#2673);\r
+-#2676=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));\r
+-#2677=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2678=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2679=AXIS2_PLACEMENT_3D('',#2676,#2677,#2678);\r
+-#2681=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2682=VECTOR('',#2681,1.E0);\r
+-#2683=CARTESIAN_POINT('',(6.1925E0,1.E0,9.E0));\r
+-#2684=LINE('',#2683,#2682);\r
+-#2685=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2686=VECTOR('',#2685,1.E0);\r
+-#2687=CARTESIAN_POINT('',(5.8075E0,1.E0,9.E0));\r
+-#2688=LINE('',#2687,#2686);\r
+-#2689=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2690=VECTOR('',#2689,5.E-1);\r
+-#2691=CARTESIAN_POINT('',(1.22575E1,1.5E0,9.E0));\r
+-#2692=LINE('',#2691,#2690);\r
+-#2693=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2694=VECTOR('',#2693,5.E-1);\r
+-#2695=CARTESIAN_POINT('',(1.17425E1,1.5E0,9.E0));\r
+-#2696=LINE('',#2695,#2694);\r
+-#2697=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));\r
+-#2698=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2699=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2700=AXIS2_PLACEMENT_3D('',#2697,#2698,#2699);\r
+-#2702=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));\r
+-#2703=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2704=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2705=AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);\r
+-#2707=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));\r
+-#2708=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2709=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2710=AXIS2_PLACEMENT_3D('',#2707,#2708,#2709);\r
+-#2712=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));\r
+-#2713=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2714=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2715=AXIS2_PLACEMENT_3D('',#2712,#2713,#2714);\r
+-#2717=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2718=VECTOR('',#2717,1.E0);\r
+-#2719=CARTESIAN_POINT('',(1.21925E1,1.E0,9.E0));\r
+-#2720=LINE('',#2719,#2718);\r
+-#2721=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2722=VECTOR('',#2721,1.E0);\r
+-#2723=CARTESIAN_POINT('',(1.18075E1,1.E0,9.E0));\r
+-#2724=LINE('',#2723,#2722);\r
+-#2725=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2726=VECTOR('',#2725,5.E-1);\r
+-#2727=CARTESIAN_POINT('',(1.82575E1,1.5E0,9.E0));\r
+-#2728=LINE('',#2727,#2726);\r
+-#2729=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2730=VECTOR('',#2729,5.E-1);\r
+-#2731=CARTESIAN_POINT('',(1.77425E1,1.5E0,9.E0));\r
+-#2732=LINE('',#2731,#2730);\r
+-#2733=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));\r
+-#2734=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2735=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2736=AXIS2_PLACEMENT_3D('',#2733,#2734,#2735);\r
+-#2738=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));\r
+-#2739=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2740=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2741=AXIS2_PLACEMENT_3D('',#2738,#2739,#2740);\r
+-#2743=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));\r
+-#2744=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2745=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2746=AXIS2_PLACEMENT_3D('',#2743,#2744,#2745);\r
+-#2748=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));\r
+-#2749=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2750=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2751=AXIS2_PLACEMENT_3D('',#2748,#2749,#2750);\r
+-#2753=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2754=VECTOR('',#2753,1.E0);\r
+-#2755=CARTESIAN_POINT('',(1.81925E1,1.E0,9.E0));\r
+-#2756=LINE('',#2755,#2754);\r
+-#2757=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2758=VECTOR('',#2757,1.E0);\r
+-#2759=CARTESIAN_POINT('',(1.78075E1,1.E0,9.E0));\r
+-#2760=LINE('',#2759,#2758);\r
+-#2761=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2762=VECTOR('',#2761,5.E-1);\r
+-#2763=CARTESIAN_POINT('',(6.2575E0,1.5E0,1.8E1));\r
+-#2764=LINE('',#2763,#2762);\r
+-#2765=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2766=VECTOR('',#2765,5.E-1);\r
+-#2767=CARTESIAN_POINT('',(5.7425E0,1.5E0,1.8E1));\r
+-#2768=LINE('',#2767,#2766);\r
+-#2769=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));\r
+-#2770=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2771=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2772=AXIS2_PLACEMENT_3D('',#2769,#2770,#2771);\r
+-#2774=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));\r
+-#2775=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2776=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2777=AXIS2_PLACEMENT_3D('',#2774,#2775,#2776);\r
+-#2779=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));\r
+-#2780=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2781=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2782=AXIS2_PLACEMENT_3D('',#2779,#2780,#2781);\r
+-#2784=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));\r
+-#2785=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2786=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2787=AXIS2_PLACEMENT_3D('',#2784,#2785,#2786);\r
+-#2789=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2790=VECTOR('',#2789,1.E0);\r
+-#2791=CARTESIAN_POINT('',(6.1925E0,1.E0,1.8E1));\r
+-#2792=LINE('',#2791,#2790);\r
+-#2793=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2794=VECTOR('',#2793,1.E0);\r
+-#2795=CARTESIAN_POINT('',(5.8075E0,1.E0,1.8E1));\r
+-#2796=LINE('',#2795,#2794);\r
+-#2797=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2798=VECTOR('',#2797,5.E-1);\r
+-#2799=CARTESIAN_POINT('',(1.22575E1,1.5E0,1.8E1));\r
+-#2800=LINE('',#2799,#2798);\r
+-#2801=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2802=VECTOR('',#2801,5.E-1);\r
+-#2803=CARTESIAN_POINT('',(1.17425E1,1.5E0,1.8E1));\r
+-#2804=LINE('',#2803,#2802);\r
+-#2805=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));\r
+-#2806=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2807=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2808=AXIS2_PLACEMENT_3D('',#2805,#2806,#2807);\r
+-#2810=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));\r
+-#2811=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2812=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2813=AXIS2_PLACEMENT_3D('',#2810,#2811,#2812);\r
+-#2815=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));\r
+-#2816=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2817=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2818=AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);\r
+-#2820=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));\r
+-#2821=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2822=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2823=AXIS2_PLACEMENT_3D('',#2820,#2821,#2822);\r
+-#2825=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2826=VECTOR('',#2825,1.E0);\r
+-#2827=CARTESIAN_POINT('',(1.21925E1,1.E0,1.8E1));\r
+-#2828=LINE('',#2827,#2826);\r
+-#2829=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2830=VECTOR('',#2829,1.E0);\r
+-#2831=CARTESIAN_POINT('',(1.18075E1,1.E0,1.8E1));\r
+-#2832=LINE('',#2831,#2830);\r
+-#2833=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2834=VECTOR('',#2833,5.E-1);\r
+-#2835=CARTESIAN_POINT('',(1.82575E1,1.5E0,1.8E1));\r
+-#2836=LINE('',#2835,#2834);\r
+-#2837=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2838=VECTOR('',#2837,5.E-1);\r
+-#2839=CARTESIAN_POINT('',(1.77425E1,1.5E0,1.8E1));\r
+-#2840=LINE('',#2839,#2838);\r
+-#2841=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));\r
+-#2842=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2843=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2844=AXIS2_PLACEMENT_3D('',#2841,#2842,#2843);\r
+-#2846=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));\r
+-#2847=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2848=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2849=AXIS2_PLACEMENT_3D('',#2846,#2847,#2848);\r
+-#2851=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));\r
+-#2852=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2853=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2854=AXIS2_PLACEMENT_3D('',#2851,#2852,#2853);\r
+-#2856=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));\r
+-#2857=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2858=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2859=AXIS2_PLACEMENT_3D('',#2856,#2857,#2858);\r
+-#2861=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2862=VECTOR('',#2861,1.E0);\r
+-#2863=CARTESIAN_POINT('',(1.81925E1,1.E0,1.8E1));\r
+-#2864=LINE('',#2863,#2862);\r
+-#2865=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2866=VECTOR('',#2865,1.E0);\r
+-#2867=CARTESIAN_POINT('',(1.78075E1,1.E0,1.8E1));\r
+-#2868=LINE('',#2867,#2866);\r
+-#2869=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#2870=VECTOR('',#2869,5.773502691896E0);\r
+-#2871=CARTESIAN_POINT('',(2.2E1,6.5E0,1.E1));\r
+-#2872=LINE('',#2871,#2870);\r
+-#2873=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));\r
+-#2874=CARTESIAN_POINT('',(2.31325E1,2.930774450068E0,1.206069333205E1));\r
+-#2875=CARTESIAN_POINT('',(2.309416136180E1,2.745461691651E0,1.216768370301E1));\r
+-#2876=CARTESIAN_POINT('',(2.297013771881E1,2.608885438662E0,1.224653603944E1));\r
+-#2877=CARTESIAN_POINT('',(2.2875E1,2.580400233539E0,1.226298198028E1));\r
+-#2878=CARTESIAN_POINT('',(2.277986228119E1,2.608885438662E0,1.224653603944E1));\r
+-#2879=CARTESIAN_POINT('',(2.265583863820E1,2.745461691651E0,1.216768370301E1));\r
+-#2880=CARTESIAN_POINT('',(2.26175E1,2.930774450068E0,1.206069333205E1));\r
+-#2881=CARTESIAN_POINT('',(2.26175E1,3.035898384862E0,1.2E1));\r
+-#2883=CARTESIAN_POINT('',(2.26175E1,3.035898384862E0,1.2E1));\r
+-#2884=CARTESIAN_POINT('',(2.26175E1,3.141022319657E0,1.193930666795E1));\r
+-#2885=CARTESIAN_POINT('',(2.265583863820E1,3.326335078073E0,1.183231629699E1));\r
+-#2886=CARTESIAN_POINT('',(2.277986228119E1,3.462911331062E0,1.175346396056E1));\r
+-#2887=CARTESIAN_POINT('',(2.2875E1,3.491396536186E0,1.173701801972E1));\r
+-#2888=CARTESIAN_POINT('',(2.297013771881E1,3.462911331062E0,1.175346396056E1));\r
+-#2889=CARTESIAN_POINT('',(2.309416136180E1,3.326335078073E0,1.183231629699E1));\r
+-#2890=CARTESIAN_POINT('',(2.31325E1,3.141022319657E0,1.193930666795E1));\r
+-#2891=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));\r
+-#2893=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#2894=VECTOR('',#2893,2.035898384862E0);\r
+-#2895=CARTESIAN_POINT('',(2.26175E1,1.E0,1.2E1));\r
+-#2896=LINE('',#2895,#2894);\r
+-#2897=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2898=VECTOR('',#2897,2.035898384862E0);\r
+-#2899=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));\r
+-#2900=LINE('',#2899,#2898);\r
+-#2901=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));\r
+-#2902=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2903=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2904=AXIS2_PLACEMENT_3D('',#2901,#2902,#2903);\r
+-#2906=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));\r
+-#2907=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2908=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2909=AXIS2_PLACEMENT_3D('',#2906,#2907,#2908);\r
+-#2911=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));\r
+-#2912=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2913=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2914=AXIS2_PLACEMENT_3D('',#2911,#2912,#2913);\r
+-#2916=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));\r
+-#2917=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2918=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2919=AXIS2_PLACEMENT_3D('',#2916,#2917,#2918);\r
+-#2921=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2922=VECTOR('',#2921,1.E0);\r
+-#2923=CARTESIAN_POINT('',(2.30675E1,1.E0,1.2E1));\r
+-#2924=LINE('',#2923,#2922);\r
+-#2925=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2926=VECTOR('',#2925,1.E0);\r
+-#2927=CARTESIAN_POINT('',(2.26825E1,1.E0,1.2E1));\r
+-#2928=LINE('',#2927,#2926);\r
+-#2929=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2930=VECTOR('',#2929,5.E-1);\r
+-#2931=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));\r
+-#2932=LINE('',#2931,#2930);\r
+-#2933=CARTESIAN_POINT('',(2.185E1,6.65E0,9.5E0));\r
+-#2934=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2935=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2936=AXIS2_PLACEMENT_3D('',#2933,#2934,#2935);\r
+-#2938=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2939=VECTOR('',#2938,5.E-1);\r
+-#2940=CARTESIAN_POINT('',(2.185E1,7.E0,1.E1));\r
+-#2941=LINE('',#2940,#2939);\r
+-#2942=CARTESIAN_POINT('',(2.185E1,6.65E0,1.E1));\r
+-#2943=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2944=DIRECTION('',(1.015061051086E-14,1.E0,0.E0));\r
+-#2945=AXIS2_PLACEMENT_3D('',#2942,#2943,#2944);\r
+-#2947=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2948=VECTOR('',#2947,5.E-1);\r
+-#2949=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));\r
+-#2950=LINE('',#2949,#2948);\r
+-#2951=CARTESIAN_POINT('',(2.115E1,2.35E0,9.5E0));\r
+-#2952=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2953=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#2954=AXIS2_PLACEMENT_3D('',#2951,#2952,#2953);\r
+-#2956=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2957=VECTOR('',#2956,5.E-1);\r
+-#2958=CARTESIAN_POINT('',(2.15E1,2.35E0,9.5E0));\r
+-#2959=LINE('',#2958,#2957);\r
+-#2960=CARTESIAN_POINT('',(2.115E1,2.35E0,1.E1));\r
+-#2961=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2962=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#2963=AXIS2_PLACEMENT_3D('',#2960,#2961,#2962);\r
+-#2965=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2966=VECTOR('',#2965,5.E-1);\r
+-#2967=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));\r
+-#2968=LINE('',#2967,#2966);\r
+-#2969=CARTESIAN_POINT('',(1.985E1,2.35E0,9.5E0));\r
+-#2970=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2971=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2972=AXIS2_PLACEMENT_3D('',#2969,#2970,#2971);\r
+-#2974=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2975=VECTOR('',#2974,5.E-1);\r
+-#2976=CARTESIAN_POINT('',(1.985E1,2.E0,9.5E0));\r
+-#2977=LINE('',#2976,#2975);\r
+-#2978=CARTESIAN_POINT('',(1.985E1,2.35E0,1.E1));\r
+-#2979=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2980=DIRECTION('',(1.015061051086E-14,-1.E0,0.E0));\r
+-#2981=AXIS2_PLACEMENT_3D('',#2978,#2979,#2980);\r
+-#2983=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2984=VECTOR('',#2983,5.E-1);\r
+-#2985=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));\r
+-#2986=LINE('',#2985,#2984);\r
+-#2987=CARTESIAN_POINT('',(1.985E1,9.15E0,9.5E0));\r
+-#2988=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2989=DIRECTION('',(1.015061051086E-14,1.E0,0.E0));\r
+-#2990=AXIS2_PLACEMENT_3D('',#2987,#2988,#2989);\r
+-#2992=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#2993=VECTOR('',#2992,5.E-1);\r
+-#2994=CARTESIAN_POINT('',(1.95E1,9.15E0,9.5E0));\r
+-#2995=LINE('',#2994,#2993);\r
+-#2996=CARTESIAN_POINT('',(1.985E1,9.15E0,1.E1));\r
+-#2997=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#2998=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#2999=AXIS2_PLACEMENT_3D('',#2996,#2997,#2998);\r
+-#3001=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3002=VECTOR('',#3001,5.E-1);\r
+-#3003=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));\r
+-#3004=LINE('',#3003,#3002);\r
+-#3005=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,9.5E0));\r
+-#3006=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3007=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3008=AXIS2_PLACEMENT_3D('',#3005,#3006,#3007);\r
+-#3010=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3011=VECTOR('',#3010,5.E-1);\r
+-#3012=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,9.5E0));\r
+-#3013=LINE('',#3012,#3011);\r
+-#3014=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,1.E1));\r
+-#3015=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3016=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3017=AXIS2_PLACEMENT_3D('',#3014,#3015,#3016);\r
+-#3019=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3020=VECTOR('',#3019,5.E-1);\r
+-#3021=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));\r
+-#3022=LINE('',#3021,#3020);\r
+-#3023=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,9.5E0));\r
+-#3024=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3025=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3026=AXIS2_PLACEMENT_3D('',#3023,#3024,#3025);\r
+-#3028=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3029=VECTOR('',#3028,5.E-1);\r
+-#3030=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,9.5E0));\r
+-#3031=LINE('',#3030,#3029);\r
+-#3032=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,1.E1));\r
+-#3033=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3034=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3035=AXIS2_PLACEMENT_3D('',#3032,#3033,#3034);\r
+-#3037=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3038=VECTOR('',#3037,1.972007605460E-1);\r
+-#3039=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));\r
+-#3040=LINE('',#3039,#3038);\r
+-#3041=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3042=VECTOR('',#3041,4.3E0);\r
+-#3043=CARTESIAN_POINT('',(2.15E1,6.65E0,9.5E0));\r
+-#3044=LINE('',#3043,#3042);\r
+-#3045=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3046=VECTOR('',#3045,1.3E0);\r
+-#3047=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));\r
+-#3048=LINE('',#3047,#3046);\r
+-#3049=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3050=VECTOR('',#3049,6.8E0);\r
+-#3051=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));\r
+-#3052=LINE('',#3051,#3050);\r
+-#3053=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3054=VECTOR('',#3053,1.197200760546E0);\r
+-#3055=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));\r
+-#3056=LINE('',#3055,#3054);\r
+-#3057=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#3058=VECTOR('',#3057,2.059126028197E0);\r
+-#3059=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));\r
+-#3060=LINE('',#3059,#3058);\r
+-#3061=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3062=VECTOR('',#3061,2.5E-1);\r
+-#3063=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.E0));\r
+-#3064=LINE('',#3063,#3062);\r
+-#3065=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3066=VECTOR('',#3065,2.5E-1);\r
+-#3067=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.E0));\r
+-#3068=LINE('',#3067,#3066);\r
+-#3069=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));\r
+-#3070=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3071=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3072=AXIS2_PLACEMENT_3D('',#3069,#3070,#3071);\r
+-#3074=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));\r
+-#3075=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3076=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3077=AXIS2_PLACEMENT_3D('',#3074,#3075,#3076);\r
+-#3079=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3080=VECTOR('',#3079,2.5E-1);\r
+-#3081=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.E0));\r
+-#3082=LINE('',#3081,#3080);\r
+-#3083=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3084=VECTOR('',#3083,2.5E-1);\r
+-#3085=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.E0));\r
+-#3086=LINE('',#3085,#3084);\r
+-#3087=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));\r
+-#3088=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3089=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3090=AXIS2_PLACEMENT_3D('',#3087,#3088,#3089);\r
+-#3092=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));\r
+-#3093=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3094=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3095=AXIS2_PLACEMENT_3D('',#3092,#3093,#3094);\r
+-#3097=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3098=VECTOR('',#3097,2.5E-1);\r
+-#3099=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.E0));\r
+-#3100=LINE('',#3099,#3098);\r
+-#3101=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3102=VECTOR('',#3101,2.5E-1);\r
+-#3103=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.E0));\r
+-#3104=LINE('',#3103,#3102);\r
+-#3105=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));\r
+-#3106=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3107=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3108=AXIS2_PLACEMENT_3D('',#3105,#3106,#3107);\r
+-#3110=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));\r
+-#3111=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3112=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3113=AXIS2_PLACEMENT_3D('',#3110,#3111,#3112);\r
+-#3115=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3116=VECTOR('',#3115,2.5E-1);\r
+-#3117=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.E0));\r
+-#3118=LINE('',#3117,#3116);\r
+-#3119=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3120=VECTOR('',#3119,2.5E-1);\r
+-#3121=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.E0));\r
+-#3122=LINE('',#3121,#3120);\r
+-#3123=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));\r
+-#3124=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3125=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3126=AXIS2_PLACEMENT_3D('',#3123,#3124,#3125);\r
+-#3128=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));\r
+-#3129=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3130=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3131=AXIS2_PLACEMENT_3D('',#3128,#3129,#3130);\r
+-#3133=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3134=VECTOR('',#3133,2.5E-1);\r
+-#3135=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.E0));\r
+-#3136=LINE('',#3135,#3134);\r
+-#3137=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3138=VECTOR('',#3137,2.5E-1);\r
+-#3139=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.E0));\r
+-#3140=LINE('',#3139,#3138);\r
+-#3141=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));\r
+-#3142=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3143=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3144=AXIS2_PLACEMENT_3D('',#3141,#3142,#3143);\r
+-#3146=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));\r
+-#3147=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3148=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3149=AXIS2_PLACEMENT_3D('',#3146,#3147,#3148);\r
+-#3151=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3152=VECTOR('',#3151,5.E-1);\r
+-#3153=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));\r
+-#3154=LINE('',#3153,#3152);\r
+-#3155=CARTESIAN_POINT('',(3.75E0,2.75E0,8.E0));\r
+-#3156=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3157=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3158=AXIS2_PLACEMENT_3D('',#3155,#3156,#3157);\r
+-#3160=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3161=VECTOR('',#3160,5.E-1);\r
+-#3162=CARTESIAN_POINT('',(4.5E0,2.75E0,8.E0));\r
+-#3163=LINE('',#3162,#3161);\r
+-#3164=CARTESIAN_POINT('',(3.75E0,2.75E0,8.5E0));\r
+-#3165=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3166=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3167=AXIS2_PLACEMENT_3D('',#3164,#3165,#3166);\r
+-#3169=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3170=VECTOR('',#3169,5.E-1);\r
+-#3171=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));\r
+-#3172=LINE('',#3171,#3170);\r
+-#3173=CARTESIAN_POINT('',(3.75E0,8.75E0,8.E0));\r
+-#3174=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3175=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3176=AXIS2_PLACEMENT_3D('',#3173,#3174,#3175);\r
+-#3178=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3179=VECTOR('',#3178,5.E-1);\r
+-#3180=CARTESIAN_POINT('',(3.75E0,9.5E0,8.E0));\r
+-#3181=LINE('',#3180,#3179);\r
+-#3182=CARTESIAN_POINT('',(3.75E0,8.75E0,8.5E0));\r
+-#3183=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3184=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3185=AXIS2_PLACEMENT_3D('',#3182,#3183,#3184);\r
+-#3187=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3188=VECTOR('',#3187,5.E-1);\r
+-#3189=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));\r
+-#3190=LINE('',#3189,#3188);\r
+-#3191=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,8.E0));\r
+-#3192=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3193=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3194=AXIS2_PLACEMENT_3D('',#3191,#3192,#3193);\r
+-#3196=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3197=VECTOR('',#3196,5.E-1);\r
+-#3198=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.E0));\r
+-#3199=LINE('',#3198,#3197);\r
+-#3200=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,8.5E0));\r
+-#3201=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3202=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3203=AXIS2_PLACEMENT_3D('',#3200,#3201,#3202);\r
+-#3205=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3206=VECTOR('',#3205,5.E-1);\r
+-#3207=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));\r
+-#3208=LINE('',#3207,#3206);\r
+-#3209=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,8.E0));\r
+-#3210=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3211=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3212=AXIS2_PLACEMENT_3D('',#3209,#3210,#3211);\r
+-#3214=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3215=VECTOR('',#3214,5.E-1);\r
+-#3216=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.E0));\r
+-#3217=LINE('',#3216,#3215);\r
+-#3218=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,8.5E0));\r
+-#3219=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3220=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3221=AXIS2_PLACEMENT_3D('',#3218,#3219,#3220);\r
+-#3223=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3224=VECTOR('',#3223,6.E0);\r
+-#3225=CARTESIAN_POINT('',(4.5E0,8.75E0,8.5E0));\r
+-#3226=LINE('',#3225,#3224);\r
+-#3227=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3228=VECTOR('',#3227,5.618394209466E-1);\r
+-#3229=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.5E0));\r
+-#3230=LINE('',#3229,#3228);\r
+-#3231=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#3232=VECTOR('',#3231,6.863753427325E0);\r
+-#3233=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.5E0));\r
+-#3234=LINE('',#3233,#3232);\r
+-#3235=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3236=VECTOR('',#3235,3.895172754280E0);\r
+-#3237=CARTESIAN_POINT('',(3.75E0,2.E0,8.5E0));\r
+-#3238=LINE('',#3237,#3236);\r
+-#3239=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3240=VECTOR('',#3239,5.E-1);\r
+-#3241=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));\r
+-#3242=LINE('',#3241,#3240);\r
+-#3243=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.5E0));\r
+-#3244=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3245=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3246=AXIS2_PLACEMENT_3D('',#3243,#3244,#3245);\r
+-#3248=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3249=VECTOR('',#3248,5.E-1);\r
+-#3250=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.5E0));\r
+-#3251=LINE('',#3250,#3249);\r
+-#3252=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.E0));\r
+-#3253=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3254=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3255=AXIS2_PLACEMENT_3D('',#3252,#3253,#3254);\r
+-#3257=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3258=VECTOR('',#3257,3.895172754280E0);\r
+-#3259=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));\r
+-#3260=LINE('',#3259,#3258);\r
+-#3261=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#3262=VECTOR('',#3261,6.863753427325E0);\r
+-#3263=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));\r
+-#3264=LINE('',#3263,#3262);\r
+-#3265=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3266=VECTOR('',#3265,5.618394209466E-1);\r
+-#3267=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));\r
+-#3268=LINE('',#3267,#3266);\r
+-#3269=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3270=VECTOR('',#3269,6.E0);\r
+-#3271=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));\r
+-#3272=LINE('',#3271,#3270);\r
+-#3273=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3274=VECTOR('',#3273,5.E-1);\r
+-#3275=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));\r
+-#3276=LINE('',#3275,#3274);\r
+-#3277=CARTESIAN_POINT('',(2.025E1,2.75E0,8.5E0));\r
+-#3278=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3279=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3280=AXIS2_PLACEMENT_3D('',#3277,#3278,#3279);\r
+-#3282=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3283=VECTOR('',#3282,5.E-1);\r
+-#3284=CARTESIAN_POINT('',(1.95E1,2.75E0,8.5E0));\r
+-#3285=LINE('',#3284,#3283);\r
+-#3286=CARTESIAN_POINT('',(2.025E1,2.75E0,8.E0));\r
+-#3287=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3288=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3289=AXIS2_PLACEMENT_3D('',#3286,#3287,#3288);\r
+-#3291=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3292=VECTOR('',#3291,5.E-1);\r
+-#3293=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));\r
+-#3294=LINE('',#3293,#3292);\r
+-#3295=CARTESIAN_POINT('',(2.025E1,8.75E0,8.5E0));\r
+-#3296=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3297=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3298=AXIS2_PLACEMENT_3D('',#3295,#3296,#3297);\r
+-#3300=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3301=VECTOR('',#3300,5.E-1);\r
+-#3302=CARTESIAN_POINT('',(2.025E1,9.5E0,8.5E0));\r
+-#3303=LINE('',#3302,#3301);\r
+-#3304=CARTESIAN_POINT('',(2.025E1,8.75E0,8.E0));\r
+-#3305=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3306=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3307=AXIS2_PLACEMENT_3D('',#3304,#3305,#3306);\r
+-#3309=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3310=VECTOR('',#3309,5.E-1);\r
+-#3311=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));\r
+-#3312=LINE('',#3311,#3310);\r
+-#3313=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.5E0));\r
+-#3314=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3315=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3316=AXIS2_PLACEMENT_3D('',#3313,#3314,#3315);\r
+-#3318=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3319=VECTOR('',#3318,5.E-1);\r
+-#3320=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.5E0));\r
+-#3321=LINE('',#3320,#3319);\r
+-#3322=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.E0));\r
+-#3323=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3324=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#3325=AXIS2_PLACEMENT_3D('',#3322,#3323,#3324);\r
+-#3327=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3328=VECTOR('',#3327,6.875E-1);\r
+-#3329=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));\r
+-#3330=LINE('',#3329,#3328);\r
+-#3331=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3332=VECTOR('',#3331,6.875E-1);\r
+-#3333=CARTESIAN_POINT('',(7.5E0,0.E0,1.8125E0));\r
+-#3334=LINE('',#3333,#3332);\r
+-#3335=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3336=VECTOR('',#3335,6.875E-1);\r
+-#3337=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));\r
+-#3338=LINE('',#3337,#3336);\r
+-#3339=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3340=VECTOR('',#3339,6.875E-1);\r
+-#3341=CARTESIAN_POINT('',(1.05E1,0.E0,6.875E-1));\r
+-#3342=LINE('',#3341,#3340);\r
+-#3343=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3344=VECTOR('',#3343,3.E0);\r
+-#3345=CARTESIAN_POINT('',(7.5E0,6.875E-1,6.875E-1));\r
+-#3346=LINE('',#3345,#3344);\r
+-#3347=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.25E0));\r
+-#3348=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3349=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3350=AXIS2_PLACEMENT_3D('',#3347,#3348,#3349);\r
+-#3352=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3353=VECTOR('',#3352,3.E0);\r
+-#3354=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8125E0));\r
+-#3355=LINE('',#3354,#3353);\r
+-#3356=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.25E0));\r
+-#3357=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3358=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3359=AXIS2_PLACEMENT_3D('',#3356,#3357,#3358);\r
+-#3361=CARTESIAN_POINT('',(1.61E0,6.875E-1,4.5E0));\r
+-#3362=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3363=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#3364=AXIS2_PLACEMENT_3D('',#3361,#3362,#3363);\r
+-#3366=CARTESIAN_POINT('',(7.5E0,6.875E-1,7.5E0));\r
+-#3367=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3368=DIRECTION('',(-4.496088413988E-1,0.E0,-8.932255536739E-1));\r
+-#3369=AXIS2_PLACEMENT_3D('',#3366,#3367,#3368);\r
+-#3371=CARTESIAN_POINT('',(4.553039342392E0,6.875E-1,1.645354088550E0));\r
+-#3372=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3373=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3374=AXIS2_PLACEMENT_3D('',#3371,#3372,#3373);\r
+-#3376=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3377=VECTOR('',#3376,4.263248410977E0);\r
+-#3378=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,4.046865146430E0));\r
+-#3379=LINE('',#3378,#3377);\r
+-#3380=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3381=VECTOR('',#3380,6.875E-1);\r
+-#3382=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));\r
+-#3383=LINE('',#3382,#3381);\r
+-#3384=CARTESIAN_POINT('',(1.455736763592E0,0.E0,4.577195232320E0));\r
+-#3385=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3386=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3387=AXIS2_PLACEMENT_3D('',#3384,#3385,#3386);\r
+-#3389=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3390=VECTOR('',#3389,6.875E-1);\r
+-#3391=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,4.912826677187E0));\r
+-#3392=LINE('',#3391,#3390);\r
+-#3393=CARTESIAN_POINT('',(1.455736763592E0,6.875E-1,4.577195232320E0));\r
+-#3394=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3395=DIRECTION('',(-8.942796313519E-1,0.E0,4.475085931567E-1));\r
+-#3396=AXIS2_PLACEMENT_3D('',#3393,#3394,#3395);\r
+-#3398=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3399=VECTOR('',#3398,6.875E-1);\r
+-#3400=CARTESIAN_POINT('',(3.939978538987E0,0.E0,1.032293285145E0));\r
+-#3401=LINE('',#3400,#3399);\r
+-#3402=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3403=VECTOR('',#3402,6.875E-1);\r
+-#3404=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.419779663480E0));\r
+-#3405=LINE('',#3404,#3403);\r
+-#3406=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3407=VECTOR('',#3406,6.875E-1);\r
+-#3408=CARTESIAN_POINT('',(2.432015885023E0,0.E0,4.918683812405E0));\r
+-#3409=LINE('',#3408,#3407);\r
+-#3410=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3411=VECTOR('',#3410,6.875E-1);\r
+-#3412=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));\r
+-#3413=LINE('',#3412,#3411);\r
+-#3414=CARTESIAN_POINT('',(-1.85E-1,0.E0,7.815E0));\r
+-#3415=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3416=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3417=AXIS2_PLACEMENT_3D('',#3414,#3415,#3416);\r
+-#3419=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3420=VECTOR('',#3419,6.875E-1);\r
+-#3421=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,8.69E0));\r
+-#3422=LINE('',#3421,#3420);\r
+-#3423=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,7.815E0));\r
+-#3424=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3425=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3426=AXIS2_PLACEMENT_3D('',#3423,#3424,#3425);\r
+-#3428=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3429=VECTOR('',#3428,7.5E-1);\r
+-#3430=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));\r
+-#3431=LINE('',#3430,#3429);\r
+-#3432=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3433=VECTOR('',#3432,3.15E-1);\r
+-#3434=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.5E0));\r
+-#3435=LINE('',#3434,#3433);\r
+-#3436=CARTESIAN_POINT('',(1.25125E0,6.875E-1,7.5E0));\r
+-#3437=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3438=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3439=AXIS2_PLACEMENT_3D('',#3436,#3437,#3438);\r
+-#3441=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3442=VECTOR('',#3441,3.15E-1);\r
+-#3443=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));\r
+-#3444=LINE('',#3443,#3442);\r
+-#3445=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3446=VECTOR('',#3445,2.525E-1);\r
+-#3447=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,8.69E0));\r
+-#3448=LINE('',#3447,#3446);\r
+-#3449=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3450=VECTOR('',#3449,8.1E-1);\r
+-#3451=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,1.0375E1));\r
+-#3452=LINE('',#3451,#3450);\r
+-#3453=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3454=VECTOR('',#3453,3.875E0);\r
+-#3455=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.125E1));\r
+-#3456=LINE('',#3455,#3454);\r
+-#3457=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3458=VECTOR('',#3457,8.1E-1);\r
+-#3459=CARTESIAN_POINT('',(4.3125E0,6.875E-1,9.565E0));\r
+-#3460=LINE('',#3459,#3458);\r
+-#3461=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3462=VECTOR('',#3461,6.875E-1);\r
+-#3463=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));\r
+-#3464=LINE('',#3463,#3462);\r
+-#3465=CARTESIAN_POINT('',(2.6875E0,0.E0,7.815E0));\r
+-#3466=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3467=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3468=AXIS2_PLACEMENT_3D('',#3465,#3466,#3467);\r
+-#3470=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3471=VECTOR('',#3470,6.875E-1);\r
+-#3472=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.815E0));\r
+-#3473=LINE('',#3472,#3471);\r
+-#3474=CARTESIAN_POINT('',(2.6875E0,6.875E-1,7.815E0));\r
+-#3475=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3476=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3477=AXIS2_PLACEMENT_3D('',#3474,#3475,#3476);\r
+-#3479=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3480=VECTOR('',#3479,6.875E-1);\r
+-#3481=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));\r
+-#3482=LINE('',#3481,#3480);\r
+-#3483=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3484=VECTOR('',#3483,6.875E-1);\r
+-#3485=CARTESIAN_POINT('',(6.9E-1,0.E0,7.5E0));\r
+-#3486=LINE('',#3485,#3484);\r
+-#3487=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3488=VECTOR('',#3487,6.875E-1);\r
+-#3489=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));\r
+-#3490=LINE('',#3489,#3488);\r
+-#3491=CARTESIAN_POINT('',(3.4375E0,0.E0,9.565E0));\r
+-#3492=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3493=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3494=AXIS2_PLACEMENT_3D('',#3491,#3492,#3493);\r
+-#3496=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3497=VECTOR('',#3496,6.875E-1);\r
+-#3498=CARTESIAN_POINT('',(3.4375E0,0.E0,8.69E0));\r
+-#3499=LINE('',#3498,#3497);\r
+-#3500=CARTESIAN_POINT('',(3.4375E0,6.875E-1,9.565E0));\r
+-#3501=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3502=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3503=AXIS2_PLACEMENT_3D('',#3500,#3501,#3502);\r
+-#3505=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3506=VECTOR('',#3505,6.875E-1);\r
+-#3507=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));\r
+-#3508=LINE('',#3507,#3506);\r
+-#3509=CARTESIAN_POINT('',(3.4375E0,0.E0,1.0375E1));\r
+-#3510=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3511=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3512=AXIS2_PLACEMENT_3D('',#3509,#3510,#3511);\r
+-#3514=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3515=VECTOR('',#3514,6.875E-1);\r
+-#3516=CARTESIAN_POINT('',(4.3125E0,0.E0,1.0375E1));\r
+-#3517=LINE('',#3516,#3515);\r
+-#3518=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.0375E1));\r
+-#3519=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3520=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3521=AXIS2_PLACEMENT_3D('',#3518,#3519,#3520);\r
+-#3523=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3524=VECTOR('',#3523,6.875E-1);\r
+-#3525=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));\r
+-#3526=LINE('',#3525,#3524);\r
+-#3527=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.0375E1));\r
+-#3528=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3529=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3530=AXIS2_PLACEMENT_3D('',#3527,#3528,#3529);\r
+-#3532=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3533=VECTOR('',#3532,6.875E-1);\r
+-#3534=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.125E1));\r
+-#3535=LINE('',#3534,#3533);\r
+-#3536=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,1.0375E1));\r
+-#3537=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3538=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3539=AXIS2_PLACEMENT_3D('',#3536,#3537,#3538);\r
+-#3541=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3542=VECTOR('',#3541,6.875E-1);\r
+-#3543=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));\r
+-#3544=LINE('',#3543,#3542);\r
+-#3545=CARTESIAN_POINT('',(-4.375E-1,0.E0,9.565E0));\r
+-#3546=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3547=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3548=AXIS2_PLACEMENT_3D('',#3545,#3546,#3547);\r
+-#3550=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3551=VECTOR('',#3550,6.875E-1);\r
+-#3552=CARTESIAN_POINT('',(-1.3125E0,0.E0,9.565E0));\r
+-#3553=LINE('',#3552,#3551);\r
+-#3554=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,9.565E0));\r
+-#3555=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3556=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3557=AXIS2_PLACEMENT_3D('',#3554,#3555,#3556);\r
+-#3559=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3560=VECTOR('',#3559,6.875E-1);\r
+-#3561=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));\r
+-#3562=LINE('',#3561,#3560);\r
+-#3563=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3564=VECTOR('',#3563,6.875E-1);\r
+-#3565=CARTESIAN_POINT('',(1.8125E0,0.E0,1.65E1));\r
+-#3566=LINE('',#3565,#3564);\r
+-#3567=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3568=VECTOR('',#3567,6.875E-1);\r
+-#3569=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));\r
+-#3570=LINE('',#3569,#3568);\r
+-#3571=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3572=VECTOR('',#3571,6.875E-1);\r
+-#3573=CARTESIAN_POINT('',(6.875E-1,0.E0,1.35E1));\r
+-#3574=LINE('',#3573,#3572);\r
+-#3575=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3576=VECTOR('',#3575,3.E0);\r
+-#3577=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.65E1));\r
+-#3578=LINE('',#3577,#3576);\r
+-#3579=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.65E1));\r
+-#3580=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3581=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3582=AXIS2_PLACEMENT_3D('',#3579,#3580,#3581);\r
+-#3584=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3585=VECTOR('',#3584,3.E0);\r
+-#3586=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.35E1));\r
+-#3587=LINE('',#3586,#3585);\r
+-#3588=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.35E1));\r
+-#3589=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3590=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3591=AXIS2_PLACEMENT_3D('',#3588,#3589,#3590);\r
+-#3593=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3594=VECTOR('',#3593,6.875E-1);\r
+-#3595=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));\r
+-#3596=LINE('',#3595,#3594);\r
+-#3597=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3598=VECTOR('',#3597,6.875E-1);\r
+-#3599=CARTESIAN_POINT('',(1.8125E0,0.E0,2.25E1));\r
+-#3600=LINE('',#3599,#3598);\r
+-#3601=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3602=VECTOR('',#3601,6.875E-1);\r
+-#3603=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));\r
+-#3604=LINE('',#3603,#3602);\r
+-#3605=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3606=VECTOR('',#3605,6.875E-1);\r
+-#3607=CARTESIAN_POINT('',(6.875E-1,0.E0,1.95E1));\r
+-#3608=LINE('',#3607,#3606);\r
+-#3609=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3610=VECTOR('',#3609,3.E0);\r
+-#3611=CARTESIAN_POINT('',(6.875E-1,6.875E-1,2.25E1));\r
+-#3612=LINE('',#3611,#3610);\r
+-#3613=CARTESIAN_POINT('',(1.25E0,6.875E-1,2.25E1));\r
+-#3614=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3615=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3616=AXIS2_PLACEMENT_3D('',#3613,#3614,#3615);\r
+-#3618=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3619=VECTOR('',#3618,3.E0);\r
+-#3620=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.95E1));\r
+-#3621=LINE('',#3620,#3619);\r
+-#3622=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.95E1));\r
+-#3623=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3624=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3625=AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);\r
+-#3627=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3628=VECTOR('',#3627,6.875E-1);\r
+-#3629=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));\r
+-#3630=LINE('',#3629,#3628);\r
+-#3631=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3632=VECTOR('',#3631,6.875E-1);\r
+-#3633=CARTESIAN_POINT('',(7.5E0,0.E0,9.5E0));\r
+-#3634=LINE('',#3633,#3632);\r
+-#3635=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3636=VECTOR('',#3635,6.875E-1);\r
+-#3637=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));\r
+-#3638=LINE('',#3637,#3636);\r
+-#3639=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3640=VECTOR('',#3639,6.875E-1);\r
+-#3641=CARTESIAN_POINT('',(1.05E1,0.E0,8.5E0));\r
+-#3642=LINE('',#3641,#3640);\r
+-#3643=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3644=VECTOR('',#3643,3.E0);\r
+-#3645=CARTESIAN_POINT('',(7.5E0,6.875E-1,8.5E0));\r
+-#3646=LINE('',#3645,#3644);\r
+-#3647=CARTESIAN_POINT('',(7.5E0,6.875E-1,9.E0));\r
+-#3648=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3649=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3650=AXIS2_PLACEMENT_3D('',#3647,#3648,#3649);\r
+-#3652=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3653=VECTOR('',#3652,3.E0);\r
+-#3654=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.5E0));\r
+-#3655=LINE('',#3654,#3653);\r
+-#3656=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.E0));\r
+-#3657=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3658=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3659=AXIS2_PLACEMENT_3D('',#3656,#3657,#3658);\r
+-#3661=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3662=VECTOR('',#3661,6.875E-1);\r
+-#3663=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));\r
+-#3664=LINE('',#3663,#3662);\r
+-#3665=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3666=VECTOR('',#3665,6.875E-1);\r
+-#3667=CARTESIAN_POINT('',(7.5E0,0.E0,1.84375E1));\r
+-#3668=LINE('',#3667,#3666);\r
+-#3669=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3670=VECTOR('',#3669,6.875E-1);\r
+-#3671=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));\r
+-#3672=LINE('',#3671,#3670);\r
+-#3673=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3674=VECTOR('',#3673,6.875E-1);\r
+-#3675=CARTESIAN_POINT('',(1.05E1,0.E0,1.75625E1));\r
+-#3676=LINE('',#3675,#3674);\r
+-#3677=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3678=VECTOR('',#3677,3.E0);\r
+-#3679=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.75625E1));\r
+-#3680=LINE('',#3679,#3678);\r
+-#3681=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.8E1));\r
+-#3682=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3683=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3684=AXIS2_PLACEMENT_3D('',#3681,#3682,#3683);\r
+-#3686=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3687=VECTOR('',#3686,3.E0);\r
+-#3688=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.84375E1));\r
+-#3689=LINE('',#3688,#3687);\r
+-#3690=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8E1));\r
+-#3691=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3692=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3693=AXIS2_PLACEMENT_3D('',#3690,#3691,#3692);\r
+-#3695=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3696=VECTOR('',#3695,6.875E-1);\r
+-#3697=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));\r
+-#3698=LINE('',#3697,#3696);\r
+-#3699=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3700=VECTOR('',#3699,6.875E-1);\r
+-#3701=CARTESIAN_POINT('',(1.05E1,0.E0,3.13125E1));\r
+-#3702=LINE('',#3701,#3700);\r
+-#3703=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3704=VECTOR('',#3703,6.875E-1);\r
+-#3705=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));\r
+-#3706=LINE('',#3705,#3704);\r
+-#3707=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3708=VECTOR('',#3707,6.875E-1);\r
+-#3709=CARTESIAN_POINT('',(7.5E0,0.E0,3.01875E1));\r
+-#3710=LINE('',#3709,#3708);\r
+-#3711=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3712=VECTOR('',#3711,3.E0);\r
+-#3713=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.13125E1));\r
+-#3714=LINE('',#3713,#3712);\r
+-#3715=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.075E1));\r
+-#3716=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3717=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3718=AXIS2_PLACEMENT_3D('',#3715,#3716,#3717);\r
+-#3720=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3721=VECTOR('',#3720,3.E0);\r
+-#3722=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.01875E1));\r
+-#3723=LINE('',#3722,#3721);\r
+-#3724=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.075E1));\r
+-#3725=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3726=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3727=AXIS2_PLACEMENT_3D('',#3724,#3725,#3726);\r
+-#3729=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#3730=VECTOR('',#3729,4.263248410977E0);\r
+-#3731=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,2.795313485357E1));\r
+-#3732=LINE('',#3731,#3730);\r
+-#3733=CARTESIAN_POINT('',(4.553039342392E0,6.875E-1,3.035464591145E1));\r
+-#3734=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3735=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#3736=AXIS2_PLACEMENT_3D('',#3733,#3734,#3735);\r
+-#3738=CARTESIAN_POINT('',(7.5E0,6.875E-1,2.45E1));\r
+-#3739=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3740=DIRECTION('',(-4.496088413988E-1,0.E0,8.932255536739E-1));\r
+-#3741=AXIS2_PLACEMENT_3D('',#3738,#3739,#3740);\r
+-#3743=CARTESIAN_POINT('',(1.61E0,6.875E-1,2.75E1));\r
+-#3744=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3745=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#3746=AXIS2_PLACEMENT_3D('',#3743,#3744,#3745);\r
+-#3748=DIRECTION('',(0.E0,1.E0,-1.033516706560E-14));\r
+-#3749=VECTOR('',#3748,6.875E-1);\r
+-#3750=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,2.708717332281E1));\r
+-#3751=LINE('',#3750,#3749);\r
+-#3752=CARTESIAN_POINT('',(1.455736763592E0,0.E0,2.742280476768E1));\r
+-#3753=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3754=DIRECTION('',(-8.942796313519E-1,0.E0,-4.475085931567E-1));\r
+-#3755=AXIS2_PLACEMENT_3D('',#3752,#3753,#3754);\r
+-#3757=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));\r
+-#3758=VECTOR('',#3757,6.875E-1);\r
+-#3759=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));\r
+-#3760=LINE('',#3759,#3758);\r
+-#3761=CARTESIAN_POINT('',(1.455736763592E0,6.875E-1,2.742280476768E1));\r
+-#3762=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3763=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811866E-1));\r
+-#3764=AXIS2_PLACEMENT_3D('',#3761,#3762,#3763);\r
+-#3766=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));\r
+-#3767=VECTOR('',#3766,6.875E-1);\r
+-#3768=CARTESIAN_POINT('',(2.432015885023E0,0.E0,2.708131618759E1));\r
+-#3769=LINE('',#3768,#3767);\r
+-#3770=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3771=VECTOR('',#3770,6.875E-1);\r
+-#3772=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.958022033652E1));\r
+-#3773=LINE('',#3772,#3771);\r
+-#3774=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3775=VECTOR('',#3774,6.875E-1);\r
+-#3776=CARTESIAN_POINT('',(3.939978538987E0,0.E0,3.096770671486E1));\r
+-#3777=LINE('',#3776,#3775);\r
+-#3778=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3779=VECTOR('',#3778,6.875E-1);\r
+-#3780=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));\r
+-#3781=LINE('',#3780,#3779);\r
+-#3782=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3783=VECTOR('',#3782,6.875E-1);\r
+-#3784=CARTESIAN_POINT('',(1.35E1,0.E0,6.875E-1));\r
+-#3785=LINE('',#3784,#3783);\r
+-#3786=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3787=VECTOR('',#3786,6.875E-1);\r
+-#3788=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));\r
+-#3789=LINE('',#3788,#3787);\r
+-#3790=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3791=VECTOR('',#3790,6.875E-1);\r
+-#3792=CARTESIAN_POINT('',(1.65E1,0.E0,1.8125E0));\r
+-#3793=LINE('',#3792,#3791);\r
+-#3794=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3795=VECTOR('',#3794,3.E0);\r
+-#3796=CARTESIAN_POINT('',(1.65E1,6.875E-1,6.875E-1));\r
+-#3797=LINE('',#3796,#3795);\r
+-#3798=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.25E0));\r
+-#3799=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3800=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3801=AXIS2_PLACEMENT_3D('',#3798,#3799,#3800);\r
+-#3803=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3804=VECTOR('',#3803,3.E0);\r
+-#3805=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8125E0));\r
+-#3806=LINE('',#3805,#3804);\r
+-#3807=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.25E0));\r
+-#3808=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3809=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3810=AXIS2_PLACEMENT_3D('',#3807,#3808,#3809);\r
+-#3812=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3813=VECTOR('',#3812,4.263248410977E0);\r
+-#3814=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,4.046865146430E0));\r
+-#3815=LINE('',#3814,#3813);\r
+-#3816=CARTESIAN_POINT('',(1.944696065761E1,6.875E-1,1.645354088550E0));\r
+-#3817=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3818=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3819=AXIS2_PLACEMENT_3D('',#3816,#3817,#3818);\r
+-#3821=CARTESIAN_POINT('',(1.65E1,6.875E-1,7.5E0));\r
+-#3822=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3823=DIRECTION('',(4.496088413988E-1,0.E0,-8.932255536739E-1));\r
+-#3824=AXIS2_PLACEMENT_3D('',#3821,#3822,#3823);\r
+-#3826=CARTESIAN_POINT('',(2.239E1,6.875E-1,4.5E0));\r
+-#3827=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3828=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));\r
+-#3829=AXIS2_PLACEMENT_3D('',#3826,#3827,#3828);\r
+-#3831=DIRECTION('',(-1.033516706560E-14,1.E0,2.583791766400E-14));\r
+-#3832=VECTOR('',#3831,6.875E-1);\r
+-#3833=CARTESIAN_POINT('',(2.321497295992E1,0.E0,4.912826677187E0));\r
+-#3834=LINE('',#3833,#3832);\r
+-#3835=CARTESIAN_POINT('',(2.254426323641E1,0.E0,4.577195232320E0));\r
+-#3836=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3837=DIRECTION('',(8.942796313519E-1,0.E0,4.475085931567E-1));\r
+-#3838=AXIS2_PLACEMENT_3D('',#3835,#3836,#3837);\r
+-#3840=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3841=VECTOR('',#3840,6.875E-1);\r
+-#3842=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));\r
+-#3843=LINE('',#3842,#3841);\r
+-#3844=CARTESIAN_POINT('',(2.254426323641E1,6.875E-1,4.577195232320E0));\r
+-#3845=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#3846=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#3847=AXIS2_PLACEMENT_3D('',#3844,#3845,#3846);\r
+-#3849=DIRECTION('',(-1.550275059840E-14,1.E0,-2.067033413120E-14));\r
+-#3850=VECTOR('',#3849,6.875E-1);\r
+-#3851=CARTESIAN_POINT('',(2.156798411498E1,0.E0,4.918683812405E0));\r
+-#3852=LINE('',#3851,#3850);\r
+-#3853=DIRECTION('',(1.550275059840E-14,1.E0,0.E0));\r
+-#3854=VECTOR('',#3853,6.875E-1);\r
+-#3855=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.419779663480E0));\r
+-#3856=LINE('',#3855,#3854);\r
+-#3857=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3858=VECTOR('',#3857,6.875E-1);\r
+-#3859=CARTESIAN_POINT('',(2.006002146101E1,0.E0,1.032293285145E0));\r
+-#3860=LINE('',#3859,#3858);\r
+-#3861=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3862=VECTOR('',#3861,6.875E-1);\r
+-#3863=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));\r
+-#3864=LINE('',#3863,#3862);\r
+-#3865=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3866=VECTOR('',#3865,6.875E-1);\r
+-#3867=CARTESIAN_POINT('',(2.33125E1,0.E0,1.35E1));\r
+-#3868=LINE('',#3867,#3866);\r
+-#3869=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3870=VECTOR('',#3869,6.875E-1);\r
+-#3871=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));\r
+-#3872=LINE('',#3871,#3870);\r
+-#3873=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3874=VECTOR('',#3873,6.875E-1);\r
+-#3875=CARTESIAN_POINT('',(2.21875E1,0.E0,1.65E1));\r
+-#3876=LINE('',#3875,#3874);\r
+-#3877=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3878=VECTOR('',#3877,3.E0);\r
+-#3879=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.65E1));\r
+-#3880=LINE('',#3879,#3878);\r
+-#3881=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.35E1));\r
+-#3882=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3883=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3884=AXIS2_PLACEMENT_3D('',#3881,#3882,#3883);\r
+-#3886=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3887=VECTOR('',#3886,3.E0);\r
+-#3888=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.35E1));\r
+-#3889=LINE('',#3888,#3887);\r
+-#3890=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.65E1));\r
+-#3891=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3892=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3893=AXIS2_PLACEMENT_3D('',#3890,#3891,#3892);\r
+-#3895=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3896=VECTOR('',#3895,6.875E-1);\r
+-#3897=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));\r
+-#3898=LINE('',#3897,#3896);\r
+-#3899=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3900=VECTOR('',#3899,6.875E-1);\r
+-#3901=CARTESIAN_POINT('',(2.33125E1,0.E0,1.95E1));\r
+-#3902=LINE('',#3901,#3900);\r
+-#3903=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3904=VECTOR('',#3903,6.875E-1);\r
+-#3905=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));\r
+-#3906=LINE('',#3905,#3904);\r
+-#3907=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3908=VECTOR('',#3907,6.875E-1);\r
+-#3909=CARTESIAN_POINT('',(2.21875E1,0.E0,2.25E1));\r
+-#3910=LINE('',#3909,#3908);\r
+-#3911=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3912=VECTOR('',#3911,3.E0);\r
+-#3913=CARTESIAN_POINT('',(2.33125E1,6.875E-1,2.25E1));\r
+-#3914=LINE('',#3913,#3912);\r
+-#3915=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.95E1));\r
+-#3916=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3917=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3918=AXIS2_PLACEMENT_3D('',#3915,#3916,#3917);\r
+-#3920=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3921=VECTOR('',#3920,3.E0);\r
+-#3922=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.95E1));\r
+-#3923=LINE('',#3922,#3921);\r
+-#3924=CARTESIAN_POINT('',(2.275E1,6.875E-1,2.25E1));\r
+-#3925=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3926=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3927=AXIS2_PLACEMENT_3D('',#3924,#3925,#3926);\r
+-#3929=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3930=VECTOR('',#3929,6.875E-1);\r
+-#3931=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));\r
+-#3932=LINE('',#3931,#3930);\r
+-#3933=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3934=VECTOR('',#3933,6.875E-1);\r
+-#3935=CARTESIAN_POINT('',(1.35E1,0.E0,8.5E0));\r
+-#3936=LINE('',#3935,#3934);\r
+-#3937=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3938=VECTOR('',#3937,6.875E-1);\r
+-#3939=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));\r
+-#3940=LINE('',#3939,#3938);\r
+-#3941=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3942=VECTOR('',#3941,6.875E-1);\r
+-#3943=CARTESIAN_POINT('',(1.65E1,0.E0,9.5E0));\r
+-#3944=LINE('',#3943,#3942);\r
+-#3945=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3946=VECTOR('',#3945,3.E0);\r
+-#3947=CARTESIAN_POINT('',(1.65E1,6.875E-1,8.5E0));\r
+-#3948=LINE('',#3947,#3946);\r
+-#3949=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.E0));\r
+-#3950=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3951=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3952=AXIS2_PLACEMENT_3D('',#3949,#3950,#3951);\r
+-#3954=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3955=VECTOR('',#3954,3.E0);\r
+-#3956=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.5E0));\r
+-#3957=LINE('',#3956,#3955);\r
+-#3958=CARTESIAN_POINT('',(1.65E1,6.875E-1,9.E0));\r
+-#3959=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3960=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3961=AXIS2_PLACEMENT_3D('',#3958,#3959,#3960);\r
+-#3963=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3964=VECTOR('',#3963,6.875E-1);\r
+-#3965=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));\r
+-#3966=LINE('',#3965,#3964);\r
+-#3967=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3968=VECTOR('',#3967,6.875E-1);\r
+-#3969=CARTESIAN_POINT('',(1.35E1,0.E0,1.75625E1));\r
+-#3970=LINE('',#3969,#3968);\r
+-#3971=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3972=VECTOR('',#3971,6.875E-1);\r
+-#3973=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));\r
+-#3974=LINE('',#3973,#3972);\r
+-#3975=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3976=VECTOR('',#3975,6.875E-1);\r
+-#3977=CARTESIAN_POINT('',(1.65E1,0.E0,1.84375E1));\r
+-#3978=LINE('',#3977,#3976);\r
+-#3979=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#3980=VECTOR('',#3979,3.E0);\r
+-#3981=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.75625E1));\r
+-#3982=LINE('',#3981,#3980);\r
+-#3983=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8E1));\r
+-#3984=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3985=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#3986=AXIS2_PLACEMENT_3D('',#3983,#3984,#3985);\r
+-#3988=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#3989=VECTOR('',#3988,3.E0);\r
+-#3990=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.84375E1));\r
+-#3991=LINE('',#3990,#3989);\r
+-#3992=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.8E1));\r
+-#3993=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3994=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#3995=AXIS2_PLACEMENT_3D('',#3992,#3993,#3994);\r
+-#3997=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#3998=VECTOR('',#3997,6.875E-1);\r
+-#3999=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));\r
+-#4000=LINE('',#3999,#3998);\r
+-#4001=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4002=VECTOR('',#4001,6.875E-1);\r
+-#4003=CARTESIAN_POINT('',(1.65E1,0.E0,3.01875E1));\r
+-#4004=LINE('',#4003,#4002);\r
+-#4005=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4006=VECTOR('',#4005,6.875E-1);\r
+-#4007=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));\r
+-#4008=LINE('',#4007,#4006);\r
+-#4009=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4010=VECTOR('',#4009,6.875E-1);\r
+-#4011=CARTESIAN_POINT('',(1.35E1,0.E0,3.13125E1));\r
+-#4012=LINE('',#4011,#4010);\r
+-#4013=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4014=VECTOR('',#4013,3.E0);\r
+-#4015=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.13125E1));\r
+-#4016=LINE('',#4015,#4014);\r
+-#4017=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.075E1));\r
+-#4018=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4019=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#4020=AXIS2_PLACEMENT_3D('',#4017,#4018,#4019);\r
+-#4022=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4023=VECTOR('',#4022,3.E0);\r
+-#4024=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.01875E1));\r
+-#4025=LINE('',#4024,#4023);\r
+-#4026=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.075E1));\r
+-#4027=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4028=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4029=AXIS2_PLACEMENT_3D('',#4026,#4027,#4028);\r
+-#4031=CARTESIAN_POINT('',(2.239E1,6.875E-1,2.75E1));\r
+-#4032=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4033=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));\r
+-#4034=AXIS2_PLACEMENT_3D('',#4031,#4032,#4033);\r
+-#4036=CARTESIAN_POINT('',(1.65E1,6.875E-1,2.45E1));\r
+-#4037=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4038=DIRECTION('',(4.496088413988E-1,0.E0,8.932255536739E-1));\r
+-#4039=AXIS2_PLACEMENT_3D('',#4036,#4037,#4038);\r
+-#4041=CARTESIAN_POINT('',(1.944696065761E1,6.875E-1,3.035464591145E1));\r
+-#4042=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4043=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#4044=AXIS2_PLACEMENT_3D('',#4041,#4042,#4043);\r
+-#4046=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#4047=VECTOR('',#4046,4.263248410977E0);\r
+-#4048=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,2.795313485357E1));\r
+-#4049=LINE('',#4048,#4047);\r
+-#4050=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4051=VECTOR('',#4050,6.875E-1);\r
+-#4052=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));\r
+-#4053=LINE('',#4052,#4051);\r
+-#4054=CARTESIAN_POINT('',(2.254426323641E1,0.E0,2.742280476768E1));\r
+-#4055=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4056=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#4057=AXIS2_PLACEMENT_3D('',#4054,#4055,#4056);\r
+-#4059=DIRECTION('',(0.E0,1.E0,2.067033413120E-14));\r
+-#4060=VECTOR('',#4059,6.875E-1);\r
+-#4061=CARTESIAN_POINT('',(2.321497295992E1,0.E0,2.708717332281E1));\r
+-#4062=LINE('',#4061,#4060);\r
+-#4063=CARTESIAN_POINT('',(2.254426323641E1,6.875E-1,2.742280476768E1));\r
+-#4064=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4065=DIRECTION('',(8.942796313519E-1,0.E0,-4.475085931567E-1));\r
+-#4066=AXIS2_PLACEMENT_3D('',#4063,#4064,#4065);\r
+-#4068=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4069=VECTOR('',#4068,6.875E-1);\r
+-#4070=CARTESIAN_POINT('',(2.006002146101E1,0.E0,3.096770671486E1));\r
+-#4071=LINE('',#4070,#4069);\r
+-#4072=DIRECTION('',(1.033516706560E-14,1.E0,0.E0));\r
+-#4073=VECTOR('',#4072,6.875E-1);\r
+-#4074=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.958022033652E1));\r
+-#4075=LINE('',#4074,#4073);\r
+-#4076=DIRECTION('',(-2.067033413120E-14,1.E0,3.100550119680E-14));\r
+-#4077=VECTOR('',#4076,6.875E-1);\r
+-#4078=CARTESIAN_POINT('',(2.156798411498E1,0.E0,2.708131618759E1));\r
+-#4079=LINE('',#4078,#4077);\r
+-#4080=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4081=VECTOR('',#4080,6.875E-1);\r
+-#4082=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));\r
+-#4083=LINE('',#4082,#4081);\r
+-#4084=CARTESIAN_POINT('',(2.13075E1,6.875E-1,7.81E0));\r
+-#4085=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4086=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4087=AXIS2_PLACEMENT_3D('',#4084,#4085,#4086);\r
+-#4089=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4090=VECTOR('',#4089,6.875E-1);\r
+-#4091=CARTESIAN_POINT('',(2.21875E1,0.E0,7.81E0));\r
+-#4092=LINE('',#4091,#4090);\r
+-#4093=CARTESIAN_POINT('',(2.13075E1,0.E0,7.81E0));\r
+-#4094=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4095=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4096=AXIS2_PLACEMENT_3D('',#4093,#4094,#4095);\r
+-#4098=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4099=VECTOR('',#4098,6.875E-1);\r
+-#4100=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));\r
+-#4101=LINE('',#4100,#4099);\r
+-#4102=CARTESIAN_POINT('',(2.05675E1,6.875E-1,9.57E0));\r
+-#4103=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4104=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4105=AXIS2_PLACEMENT_3D('',#4102,#4103,#4104);\r
+-#4107=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4108=VECTOR('',#4107,6.875E-1);\r
+-#4109=CARTESIAN_POINT('',(2.05675E1,6.875E-1,8.69E0));\r
+-#4110=LINE('',#4109,#4108);\r
+-#4111=CARTESIAN_POINT('',(2.05675E1,0.E0,9.57E0));\r
+-#4112=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4113=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#4114=AXIS2_PLACEMENT_3D('',#4111,#4112,#4113);\r
+-#4116=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4117=VECTOR('',#4116,6.875E-1);\r
+-#4118=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));\r
+-#4119=LINE('',#4118,#4117);\r
+-#4120=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.037E1));\r
+-#4121=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4122=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4123=AXIS2_PLACEMENT_3D('',#4120,#4121,#4122);\r
+-#4125=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4126=VECTOR('',#4125,6.875E-1);\r
+-#4127=CARTESIAN_POINT('',(1.96875E1,6.875E-1,1.037E1));\r
+-#4128=LINE('',#4127,#4126);\r
+-#4129=CARTESIAN_POINT('',(2.05675E1,0.E0,1.037E1));\r
+-#4130=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4131=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4132=AXIS2_PLACEMENT_3D('',#4129,#4130,#4131);\r
+-#4134=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4135=VECTOR('',#4134,6.875E-1);\r
+-#4136=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));\r
+-#4137=LINE('',#4136,#4135);\r
+-#4138=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.037E1));\r
+-#4139=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4140=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4141=AXIS2_PLACEMENT_3D('',#4138,#4139,#4140);\r
+-#4143=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4144=VECTOR('',#4143,6.875E-1);\r
+-#4145=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.125E1));\r
+-#4146=LINE('',#4145,#4144);\r
+-#4147=CARTESIAN_POINT('',(2.44325E1,0.E0,1.037E1));\r
+-#4148=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4149=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4150=AXIS2_PLACEMENT_3D('',#4147,#4148,#4149);\r
+-#4152=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4153=VECTOR('',#4152,6.875E-1);\r
+-#4154=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));\r
+-#4155=LINE('',#4154,#4153);\r
+-#4156=CARTESIAN_POINT('',(2.44325E1,6.875E-1,9.57E0));\r
+-#4157=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4158=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#4159=AXIS2_PLACEMENT_3D('',#4156,#4157,#4158);\r
+-#4161=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4162=VECTOR('',#4161,6.875E-1);\r
+-#4163=CARTESIAN_POINT('',(2.53125E1,6.875E-1,9.57E0));\r
+-#4164=LINE('',#4163,#4162);\r
+-#4165=CARTESIAN_POINT('',(2.44325E1,0.E0,9.57E0));\r
+-#4166=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4167=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4168=AXIS2_PLACEMENT_3D('',#4165,#4166,#4167);\r
+-#4170=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4171=VECTOR('',#4170,6.875E-1);\r
+-#4172=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));\r
+-#4173=LINE('',#4172,#4171);\r
+-#4174=CARTESIAN_POINT('',(2.419E1,6.875E-1,7.81E0));\r
+-#4175=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4176=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4177=AXIS2_PLACEMENT_3D('',#4174,#4175,#4176);\r
+-#4179=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4180=VECTOR('',#4179,6.875E-1);\r
+-#4181=CARTESIAN_POINT('',(2.419E1,0.E0,8.69E0));\r
+-#4182=LINE('',#4181,#4180);\r
+-#4183=CARTESIAN_POINT('',(2.419E1,0.E0,7.81E0));\r
+-#4184=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#4185=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4186=AXIS2_PLACEMENT_3D('',#4183,#4184,#4185);\r
+-#4188=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));\r
+-#4189=VECTOR('',#4188,6.875E-1);\r
+-#4190=CARTESIAN_POINT('',(2.331E1,0.E0,7.5E0));\r
+-#4191=LINE('',#4190,#4189);\r
+-#4192=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4193=VECTOR('',#4192,6.875E-1);\r
+-#4194=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));\r
+-#4195=LINE('',#4194,#4193);\r
+-#4196=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4197=VECTOR('',#4196,2.425E-1);\r
+-#4198=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));\r
+-#4199=LINE('',#4198,#4197);\r
+-#4200=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#4201=VECTOR('',#4200,3.1E-1);\r
+-#4202=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.81E0));\r
+-#4203=LINE('',#4202,#4201);\r
+-#4204=CARTESIAN_POINT('',(2.274875E1,6.875E-1,7.5E0));\r
+-#4205=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#4206=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4207=AXIS2_PLACEMENT_3D('',#4204,#4205,#4206);\r
+-#4209=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4210=VECTOR('',#4209,3.1E-1);\r
+-#4211=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.5E0));\r
+-#4212=LINE('',#4211,#4210);\r
+-#4213=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#4214=VECTOR('',#4213,7.4E-1);\r
+-#4215=CARTESIAN_POINT('',(2.13075E1,6.875E-1,8.69E0));\r
+-#4216=LINE('',#4215,#4214);\r
+-#4217=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#4218=VECTOR('',#4217,8.E-1);\r
+-#4219=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));\r
+-#4220=LINE('',#4219,#4218);\r
+-#4221=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#4222=VECTOR('',#4221,3.865E0);\r
+-#4223=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));\r
+-#4224=LINE('',#4223,#4222);\r
+-#4225=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#4226=VECTOR('',#4225,8.E-1);\r
+-#4227=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));\r
+-#4228=LINE('',#4227,#4226);\r
+-#4229=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));\r
+-#4230=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));\r
+-#4231=VERTEX_POINT('',#4229);\r
+-#4232=VERTEX_POINT('',#4230);\r
+-#4233=CARTESIAN_POINT('',(2.E1,0.E0,3.2E1));\r
+-#4234=CARTESIAN_POINT('',(2.E1,1.5E0,3.2E1));\r
+-#4235=VERTEX_POINT('',#4233);\r
+-#4236=VERTEX_POINT('',#4234);\r
+-#4237=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));\r
+-#4238=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));\r
+-#4239=VERTEX_POINT('',#4237);\r
+-#4240=VERTEX_POINT('',#4238);\r
+-#4241=CARTESIAN_POINT('',(2.4E1,0.E0,4.E0));\r
+-#4242=CARTESIAN_POINT('',(2.4E1,1.5E0,4.E0));\r
+-#4243=VERTEX_POINT('',#4241);\r
+-#4244=VERTEX_POINT('',#4242);\r
+-#4245=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));\r
+-#4246=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));\r
+-#4247=VERTEX_POINT('',#4245);\r
+-#4248=VERTEX_POINT('',#4246);\r
+-#4249=CARTESIAN_POINT('',(0.E0,0.E0,2.8E1));\r
+-#4250=CARTESIAN_POINT('',(0.E0,1.5E0,2.8E1));\r
+-#4251=VERTEX_POINT('',#4249);\r
+-#4252=VERTEX_POINT('',#4250);\r
+-#4253=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));\r
+-#4254=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));\r
+-#4255=VERTEX_POINT('',#4253);\r
+-#4256=VERTEX_POINT('',#4254);\r
+-#4257=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));\r
+-#4258=CARTESIAN_POINT('',(4.E0,1.5E0,0.E0));\r
+-#4259=VERTEX_POINT('',#4257);\r
+-#4260=VERTEX_POINT('',#4258);\r
+-#4261=CARTESIAN_POINT('',(7.5E0,1.5E0,2.5E0));\r
+-#4262=CARTESIAN_POINT('',(7.5E0,0.E0,2.5E0));\r
+-#4263=VERTEX_POINT('',#4261);\r
+-#4264=VERTEX_POINT('',#4262);\r
+-#4265=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));\r
+-#4266=CARTESIAN_POINT('',(1.65E1,0.E0,2.5E0));\r
+-#4267=VERTEX_POINT('',#4265);\r
+-#4268=VERTEX_POINT('',#4266);\r
+-#4269=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));\r
+-#4270=CARTESIAN_POINT('',(7.5E0,0.E0,2.95E1));\r
+-#4271=VERTEX_POINT('',#4269);\r
+-#4272=VERTEX_POINT('',#4270);\r
+-#4273=CARTESIAN_POINT('',(2.5E0,1.5E0,2.45E1));\r
+-#4274=CARTESIAN_POINT('',(2.5E0,0.E0,2.45E1));\r
+-#4275=VERTEX_POINT('',#4273);\r
+-#4276=VERTEX_POINT('',#4274);\r
+-#4277=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));\r
+-#4278=CARTESIAN_POINT('',(2.15E1,0.E0,2.45E1));\r
+-#4279=VERTEX_POINT('',#4277);\r
+-#4280=VERTEX_POINT('',#4278);\r
+-#4281=CARTESIAN_POINT('',(1.65E1,1.5E0,2.95E1));\r
+-#4282=CARTESIAN_POINT('',(1.65E1,0.E0,2.95E1));\r
+-#4283=VERTEX_POINT('',#4281);\r
+-#4284=VERTEX_POINT('',#4282);\r
+-#4285=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));\r
+-#4286=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));\r
+-#4287=VERTEX_POINT('',#4285);\r
+-#4288=VERTEX_POINT('',#4286);\r
+-#4289=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));\r
+-#4290=VERTEX_POINT('',#4289);\r
+-#4291=CARTESIAN_POINT('',(5.E0,1.15E1,1.E1));\r
+-#4292=CARTESIAN_POINT('',(3.E0,1.15E1,1.E1));\r
+-#4293=VERTEX_POINT('',#4291);\r
+-#4294=VERTEX_POINT('',#4292);\r
+-#4295=CARTESIAN_POINT('',(-2.E0,2.5E0,1.E1));\r
+-#4296=VERTEX_POINT('',#4295);\r
+-#4297=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));\r
+-#4298=VERTEX_POINT('',#4297);\r
+-#4299=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));\r
+-#4300=VERTEX_POINT('',#4299);\r
+-#4301=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));\r
+-#4302=CARTESIAN_POINT('',(2.5E0,0.E0,1.325E1));\r
+-#4303=VERTEX_POINT('',#4301);\r
+-#4304=VERTEX_POINT('',#4302);\r
+-#4305=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));\r
+-#4306=CARTESIAN_POINT('',(3.5E0,0.E0,1.225E1));\r
+-#4307=VERTEX_POINT('',#4305);\r
+-#4308=VERTEX_POINT('',#4306);\r
+-#4309=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));\r
+-#4310=CARTESIAN_POINT('',(0.E0,1.5E0,1.325E1));\r
+-#4311=VERTEX_POINT('',#4309);\r
+-#4312=VERTEX_POINT('',#4310);\r
+-#4313=CARTESIAN_POINT('',(-1.E0,0.E0,1.225E1));\r
+-#4314=CARTESIAN_POINT('',(-1.E0,1.5E0,1.225E1));\r
+-#4315=VERTEX_POINT('',#4313);\r
+-#4316=VERTEX_POINT('',#4314);\r
+-#4317=CARTESIAN_POINT('',(0.E0,1.5E0,7.E0));\r
+-#4318=CARTESIAN_POINT('',(0.E0,0.E0,7.E0));\r
+-#4319=VERTEX_POINT('',#4317);\r
+-#4320=VERTEX_POINT('',#4318);\r
+-#4321=CARTESIAN_POINT('',(-1.E0,1.5E0,8.E0));\r
+-#4322=CARTESIAN_POINT('',(-1.E0,0.E0,8.E0));\r
+-#4323=VERTEX_POINT('',#4321);\r
+-#4324=VERTEX_POINT('',#4322);\r
+-#4325=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));\r
+-#4326=CARTESIAN_POINT('',(3.531373033403E0,0.E0,8.E0));\r
+-#4327=VERTEX_POINT('',#4325);\r
+-#4328=VERTEX_POINT('',#4326);\r
+-#4329=CARTESIAN_POINT('',(2.539216291754E0,1.5E0,6.875E0));\r
+-#4330=CARTESIAN_POINT('',(2.539216291754E0,0.E0,6.875E0));\r
+-#4331=VERTEX_POINT('',#4329);\r
+-#4332=VERTEX_POINT('',#4330);\r
+-#4333=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));\r
+-#4334=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));\r
+-#4335=VERTEX_POINT('',#4333);\r
+-#4336=VERTEX_POINT('',#4334);\r
+-#4337=CARTESIAN_POINT('',(4.5E0,0.E0,1.225E1));\r
+-#4338=CARTESIAN_POINT('',(4.5E0,1.5E0,1.225E1));\r
+-#4339=VERTEX_POINT('',#4337);\r
+-#4340=VERTEX_POINT('',#4338);\r
+-#4341=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));\r
+-#4342=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));\r
+-#4343=VERTEX_POINT('',#4341);\r
+-#4344=VERTEX_POINT('',#4342);\r
+-#4345=CARTESIAN_POINT('',(-2.E0,0.E0,1.175E1));\r
+-#4346=CARTESIAN_POINT('',(-2.E0,1.5E0,1.175E1));\r
+-#4347=VERTEX_POINT('',#4345);\r
+-#4348=VERTEX_POINT('',#4346);\r
+-#4349=CARTESIAN_POINT('',(4.095E0,1.1125E1,9.E0));\r
+-#4350=CARTESIAN_POINT('',(3.905E0,1.1125E1,9.E0));\r
+-#4351=VERTEX_POINT('',#4349);\r
+-#4352=VERTEX_POINT('',#4350);\r
+-#4353=CARTESIAN_POINT('',(4.095E0,1.15E1,9.E0));\r
+-#4354=CARTESIAN_POINT('',(3.905E0,1.15E1,9.E0));\r
+-#4355=VERTEX_POINT('',#4353);\r
+-#4356=VERTEX_POINT('',#4354);\r
+-#4357=CARTESIAN_POINT('',(3.929917478528E0,1.125E1,9.132582521472E0));\r
+-#4358=CARTESIAN_POINT('',(3.804917478528E0,1.125E1,9.132582521472E0));\r
+-#4359=VERTEX_POINT('',#4357);\r
+-#4360=VERTEX_POINT('',#4358);\r
+-#4361=CARTESIAN_POINT('',(3.929917478528E0,1.15E1,9.132582521472E0));\r
+-#4362=CARTESIAN_POINT('',(3.804917478528E0,1.15E1,9.132582521472E0));\r
+-#4363=VERTEX_POINT('',#4361);\r
+-#4364=VERTEX_POINT('',#4362);\r
+-#4365=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));\r
+-#4366=CARTESIAN_POINT('',(6.55E0,1.25E0,2.975E1));\r
+-#4367=VERTEX_POINT('',#4365);\r
+-#4368=VERTEX_POINT('',#4366);\r
+-#4369=CARTESIAN_POINT('',(6.35E0,1.25E0,2.975E1));\r
+-#4370=VERTEX_POINT('',#4369);\r
+-#4371=CARTESIAN_POINT('',(6.35E0,1.5E0,2.975E1));\r
+-#4372=CARTESIAN_POINT('',(6.55E0,1.5E0,2.975E1));\r
+-#4373=VERTEX_POINT('',#4371);\r
+-#4374=VERTEX_POINT('',#4372);\r
+-#4375=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));\r
+-#4376=CARTESIAN_POINT('',(7.55E0,1.25E0,2.975E1));\r
+-#4377=VERTEX_POINT('',#4375);\r
+-#4378=VERTEX_POINT('',#4376);\r
+-#4379=CARTESIAN_POINT('',(7.35E0,1.25E0,2.975E1));\r
+-#4380=VERTEX_POINT('',#4379);\r
+-#4381=CARTESIAN_POINT('',(7.35E0,1.5E0,2.975E1));\r
+-#4382=CARTESIAN_POINT('',(7.55E0,1.5E0,2.975E1));\r
+-#4383=VERTEX_POINT('',#4381);\r
+-#4384=VERTEX_POINT('',#4382);\r
+-#4385=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));\r
+-#4386=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));\r
+-#4387=VERTEX_POINT('',#4385);\r
+-#4388=VERTEX_POINT('',#4386);\r
+-#4389=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));\r
+-#4390=VERTEX_POINT('',#4389);\r
+-#4391=CARTESIAN_POINT('',(1.9E1,1.15E1,1.E1));\r
+-#4392=CARTESIAN_POINT('',(2.1E1,1.15E1,1.E1));\r
+-#4393=VERTEX_POINT('',#4391);\r
+-#4394=VERTEX_POINT('',#4392);\r
+-#4395=CARTESIAN_POINT('',(2.6E1,2.5E0,1.E1));\r
+-#4396=VERTEX_POINT('',#4395);\r
+-#4397=CARTESIAN_POINT('',(2.6E1,1.5E0,1.E1));\r
+-#4398=VERTEX_POINT('',#4397);\r
+-#4399=CARTESIAN_POINT('',(2.6E1,0.E0,8.E0));\r
+-#4400=VERTEX_POINT('',#4399);\r
+-#4401=CARTESIAN_POINT('',(2.4E1,1.5E0,1.325E1));\r
+-#4402=CARTESIAN_POINT('',(2.4E1,0.E0,1.325E1));\r
+-#4403=VERTEX_POINT('',#4401);\r
+-#4404=VERTEX_POINT('',#4402);\r
+-#4405=CARTESIAN_POINT('',(2.5E1,1.5E0,1.225E1));\r
+-#4406=CARTESIAN_POINT('',(2.5E1,0.E0,1.225E1));\r
+-#4407=VERTEX_POINT('',#4405);\r
+-#4408=VERTEX_POINT('',#4406);\r
+-#4409=CARTESIAN_POINT('',(2.15E1,0.E0,1.325E1));\r
+-#4410=CARTESIAN_POINT('',(2.15E1,1.5E0,1.325E1));\r
+-#4411=VERTEX_POINT('',#4409);\r
+-#4412=VERTEX_POINT('',#4410);\r
+-#4413=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));\r
+-#4414=CARTESIAN_POINT('',(2.05E1,1.5E0,1.225E1));\r
+-#4415=VERTEX_POINT('',#4413);\r
+-#4416=VERTEX_POINT('',#4414);\r
+-#4417=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));\r
+-#4418=CARTESIAN_POINT('',(2.4E1,1.5E0,7.E0));\r
+-#4419=VERTEX_POINT('',#4417);\r
+-#4420=VERTEX_POINT('',#4418);\r
+-#4421=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));\r
+-#4422=CARTESIAN_POINT('',(2.5E1,1.5E0,8.E0));\r
+-#4423=VERTEX_POINT('',#4421);\r
+-#4424=VERTEX_POINT('',#4422);\r
+-#4425=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));\r
+-#4426=CARTESIAN_POINT('',(2.046862696660E1,1.5E0,8.E0));\r
+-#4427=VERTEX_POINT('',#4425);\r
+-#4428=VERTEX_POINT('',#4426);\r
+-#4429=CARTESIAN_POINT('',(2.146078370825E1,0.E0,6.875E0));\r
+-#4430=CARTESIAN_POINT('',(2.146078370825E1,1.5E0,6.875E0));\r
+-#4431=VERTEX_POINT('',#4429);\r
+-#4432=VERTEX_POINT('',#4430);\r
+-#4433=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));\r
+-#4434=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));\r
+-#4435=VERTEX_POINT('',#4433);\r
+-#4436=VERTEX_POINT('',#4434);\r
+-#4437=CARTESIAN_POINT('',(1.95E1,1.5E0,1.225E1));\r
+-#4438=CARTESIAN_POINT('',(1.95E1,0.E0,1.225E1));\r
+-#4439=VERTEX_POINT('',#4437);\r
+-#4440=VERTEX_POINT('',#4438);\r
+-#4441=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));\r
+-#4442=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));\r
+-#4443=VERTEX_POINT('',#4441);\r
+-#4444=VERTEX_POINT('',#4442);\r
+-#4445=CARTESIAN_POINT('',(2.6E1,1.5E0,1.175E1));\r
+-#4446=CARTESIAN_POINT('',(2.6E1,0.E0,1.175E1));\r
+-#4447=VERTEX_POINT('',#4445);\r
+-#4448=VERTEX_POINT('',#4446);\r
+-#4449=CARTESIAN_POINT('',(1.9905E1,1.1125E1,9.E0));\r
+-#4450=CARTESIAN_POINT('',(2.0095E1,1.1125E1,9.E0));\r
+-#4451=VERTEX_POINT('',#4449);\r
+-#4452=VERTEX_POINT('',#4450);\r
+-#4453=CARTESIAN_POINT('',(1.9905E1,1.15E1,9.E0));\r
+-#4454=CARTESIAN_POINT('',(2.0095E1,1.15E1,9.E0));\r
+-#4455=VERTEX_POINT('',#4453);\r
+-#4456=VERTEX_POINT('',#4454);\r
+-#4457=CARTESIAN_POINT('',(2.007008252147E1,1.125E1,9.132582521472E0));\r
+-#4458=CARTESIAN_POINT('',(2.019508252147E1,1.125E1,9.132582521472E0));\r
+-#4459=VERTEX_POINT('',#4457);\r
+-#4460=VERTEX_POINT('',#4458);\r
+-#4461=CARTESIAN_POINT('',(2.007008252147E1,1.15E1,9.132582521472E0));\r
+-#4462=CARTESIAN_POINT('',(2.019508252147E1,1.15E1,9.132582521472E0));\r
+-#4463=VERTEX_POINT('',#4461);\r
+-#4464=VERTEX_POINT('',#4462);\r
+-#4465=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));\r
+-#4466=CARTESIAN_POINT('',(1.745E1,1.25E0,2.975E1));\r
+-#4467=VERTEX_POINT('',#4465);\r
+-#4468=VERTEX_POINT('',#4466);\r
+-#4469=CARTESIAN_POINT('',(1.765E1,1.25E0,2.975E1));\r
+-#4470=VERTEX_POINT('',#4469);\r
+-#4471=CARTESIAN_POINT('',(1.765E1,1.5E0,2.975E1));\r
+-#4472=CARTESIAN_POINT('',(1.745E1,1.5E0,2.975E1));\r
+-#4473=VERTEX_POINT('',#4471);\r
+-#4474=VERTEX_POINT('',#4472);\r
+-#4475=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));\r
+-#4476=CARTESIAN_POINT('',(1.645E1,1.25E0,2.975E1));\r
+-#4477=VERTEX_POINT('',#4475);\r
+-#4478=VERTEX_POINT('',#4476);\r
+-#4479=CARTESIAN_POINT('',(1.665E1,1.25E0,2.975E1));\r
+-#4480=VERTEX_POINT('',#4479);\r
+-#4481=CARTESIAN_POINT('',(1.665E1,1.5E0,2.975E1));\r
+-#4482=CARTESIAN_POINT('',(1.645E1,1.5E0,2.975E1));\r
+-#4483=VERTEX_POINT('',#4481);\r
+-#4484=VERTEX_POINT('',#4482);\r
+-#4485=CARTESIAN_POINT('',(1.3175E0,0.E0,6.E0));\r
+-#4486=CARTESIAN_POINT('',(9.325E-1,0.E0,6.E0));\r
+-#4487=VERTEX_POINT('',#4485);\r
+-#4488=VERTEX_POINT('',#4486);\r
+-#4489=CARTESIAN_POINT('',(1.3825E0,1.E0,6.E0));\r
+-#4490=CARTESIAN_POINT('',(8.675E-1,1.E0,6.E0));\r
+-#4491=VERTEX_POINT('',#4489);\r
+-#4492=VERTEX_POINT('',#4490);\r
+-#4493=CARTESIAN_POINT('',(1.3825E0,1.5E0,6.E0));\r
+-#4494=CARTESIAN_POINT('',(8.675E-1,1.5E0,6.E0));\r
+-#4495=VERTEX_POINT('',#4493);\r
+-#4496=VERTEX_POINT('',#4494);\r
+-#4497=CARTESIAN_POINT('',(1.3175E0,1.E0,6.E0));\r
+-#4498=CARTESIAN_POINT('',(9.325E-1,1.E0,6.E0));\r
+-#4499=VERTEX_POINT('',#4497);\r
+-#4500=VERTEX_POINT('',#4498);\r
+-#4501=CARTESIAN_POINT('',(1.3175E0,0.E0,1.2E1));\r
+-#4502=CARTESIAN_POINT('',(9.325E-1,0.E0,1.2E1));\r
+-#4503=VERTEX_POINT('',#4501);\r
+-#4504=VERTEX_POINT('',#4502);\r
+-#4505=CARTESIAN_POINT('',(1.3175E0,0.E0,1.8E1));\r
+-#4506=CARTESIAN_POINT('',(9.325E-1,0.E0,1.8E1));\r
+-#4507=VERTEX_POINT('',#4505);\r
+-#4508=VERTEX_POINT('',#4506);\r
+-#4509=CARTESIAN_POINT('',(1.3175E0,0.E0,2.4E1));\r
+-#4510=CARTESIAN_POINT('',(9.325E-1,0.E0,2.4E1));\r
+-#4511=VERTEX_POINT('',#4509);\r
+-#4512=VERTEX_POINT('',#4510);\r
+-#4513=CARTESIAN_POINT('',(2.30675E1,0.E0,6.E0));\r
+-#4514=CARTESIAN_POINT('',(2.26825E1,0.E0,6.E0));\r
+-#4515=VERTEX_POINT('',#4513);\r
+-#4516=VERTEX_POINT('',#4514);\r
+-#4517=CARTESIAN_POINT('',(2.30675E1,0.E0,1.2E1));\r
+-#4518=CARTESIAN_POINT('',(2.26825E1,0.E0,1.2E1));\r
+-#4519=VERTEX_POINT('',#4517);\r
+-#4520=VERTEX_POINT('',#4518);\r
+-#4521=CARTESIAN_POINT('',(2.30675E1,0.E0,1.8E1));\r
+-#4522=CARTESIAN_POINT('',(2.26825E1,0.E0,1.8E1));\r
+-#4523=VERTEX_POINT('',#4521);\r
+-#4524=VERTEX_POINT('',#4522);\r
+-#4525=CARTESIAN_POINT('',(2.30675E1,0.E0,2.4E1));\r
+-#4526=CARTESIAN_POINT('',(2.26825E1,0.E0,2.4E1));\r
+-#4527=VERTEX_POINT('',#4525);\r
+-#4528=VERTEX_POINT('',#4526);\r
+-#4529=CARTESIAN_POINT('',(1.3825E0,1.E0,1.2E1));\r
+-#4530=CARTESIAN_POINT('',(8.675E-1,1.E0,1.2E1));\r
+-#4531=VERTEX_POINT('',#4529);\r
+-#4532=VERTEX_POINT('',#4530);\r
+-#4533=CARTESIAN_POINT('',(1.3175E0,1.E0,1.2E1));\r
+-#4534=CARTESIAN_POINT('',(9.325E-1,1.E0,1.2E1));\r
+-#4535=VERTEX_POINT('',#4533);\r
+-#4536=VERTEX_POINT('',#4534);\r
+-#4537=CARTESIAN_POINT('',(1.3825E0,1.E0,1.8E1));\r
+-#4538=CARTESIAN_POINT('',(8.675E-1,1.E0,1.8E1));\r
+-#4539=VERTEX_POINT('',#4537);\r
+-#4540=VERTEX_POINT('',#4538);\r
+-#4541=CARTESIAN_POINT('',(1.3825E0,1.5E0,1.8E1));\r
+-#4542=CARTESIAN_POINT('',(8.675E-1,1.5E0,1.8E1));\r
+-#4543=VERTEX_POINT('',#4541);\r
+-#4544=VERTEX_POINT('',#4542);\r
+-#4545=CARTESIAN_POINT('',(1.3175E0,1.E0,1.8E1));\r
+-#4546=CARTESIAN_POINT('',(9.325E-1,1.E0,1.8E1));\r
+-#4547=VERTEX_POINT('',#4545);\r
+-#4548=VERTEX_POINT('',#4546);\r
+-#4549=CARTESIAN_POINT('',(1.3825E0,1.E0,2.4E1));\r
+-#4550=CARTESIAN_POINT('',(8.675E-1,1.E0,2.4E1));\r
+-#4551=VERTEX_POINT('',#4549);\r
+-#4552=VERTEX_POINT('',#4550);\r
+-#4553=CARTESIAN_POINT('',(1.3825E0,1.5E0,2.4E1));\r
+-#4554=CARTESIAN_POINT('',(8.675E-1,1.5E0,2.4E1));\r
+-#4555=VERTEX_POINT('',#4553);\r
+-#4556=VERTEX_POINT('',#4554);\r
+-#4557=CARTESIAN_POINT('',(1.3175E0,1.E0,2.4E1));\r
+-#4558=CARTESIAN_POINT('',(9.325E-1,1.E0,2.4E1));\r
+-#4559=VERTEX_POINT('',#4557);\r
+-#4560=VERTEX_POINT('',#4558);\r
+-#4561=CARTESIAN_POINT('',(2.31325E1,1.E0,6.E0));\r
+-#4562=CARTESIAN_POINT('',(2.26175E1,1.E0,6.E0));\r
+-#4563=VERTEX_POINT('',#4561);\r
+-#4564=VERTEX_POINT('',#4562);\r
+-#4565=CARTESIAN_POINT('',(2.31325E1,1.5E0,6.E0));\r
+-#4566=CARTESIAN_POINT('',(2.26175E1,1.5E0,6.E0));\r
+-#4567=VERTEX_POINT('',#4565);\r
+-#4568=VERTEX_POINT('',#4566);\r
+-#4569=CARTESIAN_POINT('',(2.30675E1,1.E0,6.E0));\r
+-#4570=CARTESIAN_POINT('',(2.26825E1,1.E0,6.E0));\r
+-#4571=VERTEX_POINT('',#4569);\r
+-#4572=VERTEX_POINT('',#4570);\r
+-#4573=CARTESIAN_POINT('',(2.31325E1,1.E0,1.2E1));\r
+-#4574=CARTESIAN_POINT('',(2.26175E1,1.E0,1.2E1));\r
+-#4575=VERTEX_POINT('',#4573);\r
+-#4576=VERTEX_POINT('',#4574);\r
+-#4577=CARTESIAN_POINT('',(2.30675E1,1.E0,1.2E1));\r
+-#4578=CARTESIAN_POINT('',(2.26825E1,1.E0,1.2E1));\r
+-#4579=VERTEX_POINT('',#4577);\r
+-#4580=VERTEX_POINT('',#4578);\r
+-#4581=CARTESIAN_POINT('',(2.31325E1,1.E0,1.8E1));\r
+-#4582=CARTESIAN_POINT('',(2.26175E1,1.E0,1.8E1));\r
+-#4583=VERTEX_POINT('',#4581);\r
+-#4584=VERTEX_POINT('',#4582);\r
+-#4585=CARTESIAN_POINT('',(2.31325E1,1.5E0,1.8E1));\r
+-#4586=CARTESIAN_POINT('',(2.26175E1,1.5E0,1.8E1));\r
+-#4587=VERTEX_POINT('',#4585);\r
+-#4588=VERTEX_POINT('',#4586);\r
+-#4589=CARTESIAN_POINT('',(2.30675E1,1.E0,1.8E1));\r
+-#4590=CARTESIAN_POINT('',(2.26825E1,1.E0,1.8E1));\r
+-#4591=VERTEX_POINT('',#4589);\r
+-#4592=VERTEX_POINT('',#4590);\r
+-#4593=CARTESIAN_POINT('',(2.31325E1,1.E0,2.4E1));\r
+-#4594=CARTESIAN_POINT('',(2.26175E1,1.E0,2.4E1));\r
+-#4595=VERTEX_POINT('',#4593);\r
+-#4596=VERTEX_POINT('',#4594);\r
+-#4597=CARTESIAN_POINT('',(2.31325E1,1.5E0,2.4E1));\r
+-#4598=CARTESIAN_POINT('',(2.26175E1,1.5E0,2.4E1));\r
+-#4599=VERTEX_POINT('',#4597);\r
+-#4600=VERTEX_POINT('',#4598);\r
+-#4601=CARTESIAN_POINT('',(2.30675E1,1.E0,2.4E1));\r
+-#4602=CARTESIAN_POINT('',(2.26825E1,1.E0,2.4E1));\r
+-#4603=VERTEX_POINT('',#4601);\r
+-#4604=VERTEX_POINT('',#4602);\r
+-#4605=CARTESIAN_POINT('',(6.1925E0,0.E0,1.25E0));\r
+-#4606=CARTESIAN_POINT('',(5.8075E0,0.E0,1.25E0));\r
+-#4607=VERTEX_POINT('',#4605);\r
+-#4608=VERTEX_POINT('',#4606);\r
+-#4609=CARTESIAN_POINT('',(6.256E0,1.E0,1.25E0));\r
+-#4610=CARTESIAN_POINT('',(5.744E0,1.E0,1.25E0));\r
+-#4611=VERTEX_POINT('',#4609);\r
+-#4612=VERTEX_POINT('',#4610);\r
+-#4613=CARTESIAN_POINT('',(6.256E0,1.5E0,1.25E0));\r
+-#4614=CARTESIAN_POINT('',(5.744E0,1.5E0,1.25E0));\r
+-#4615=VERTEX_POINT('',#4613);\r
+-#4616=VERTEX_POINT('',#4614);\r
+-#4617=CARTESIAN_POINT('',(6.1925E0,1.E0,1.25E0));\r
+-#4618=CARTESIAN_POINT('',(5.8075E0,1.E0,1.25E0));\r
+-#4619=VERTEX_POINT('',#4617);\r
+-#4620=VERTEX_POINT('',#4618);\r
+-#4621=CARTESIAN_POINT('',(1.21925E1,0.E0,1.25E0));\r
+-#4622=CARTESIAN_POINT('',(1.18075E1,0.E0,1.25E0));\r
+-#4623=VERTEX_POINT('',#4621);\r
+-#4624=VERTEX_POINT('',#4622);\r
+-#4625=CARTESIAN_POINT('',(6.1925E0,0.E0,3.075E1));\r
+-#4626=CARTESIAN_POINT('',(5.8075E0,0.E0,3.075E1));\r
+-#4627=VERTEX_POINT('',#4625);\r
+-#4628=VERTEX_POINT('',#4626);\r
+-#4629=CARTESIAN_POINT('',(1.21925E1,0.E0,3.075E1));\r
+-#4630=CARTESIAN_POINT('',(1.18075E1,0.E0,3.075E1));\r
+-#4631=VERTEX_POINT('',#4629);\r
+-#4632=VERTEX_POINT('',#4630);\r
+-#4633=CARTESIAN_POINT('',(1.81925E1,0.E0,1.25E0));\r
+-#4634=CARTESIAN_POINT('',(1.78075E1,0.E0,1.25E0));\r
+-#4635=VERTEX_POINT('',#4633);\r
+-#4636=VERTEX_POINT('',#4634);\r
+-#4637=CARTESIAN_POINT('',(1.81925E1,0.E0,3.075E1));\r
+-#4638=CARTESIAN_POINT('',(1.78075E1,0.E0,3.075E1));\r
+-#4639=VERTEX_POINT('',#4637);\r
+-#4640=VERTEX_POINT('',#4638);\r
+-#4641=CARTESIAN_POINT('',(1.2256E1,1.E0,1.25E0));\r
+-#4642=CARTESIAN_POINT('',(1.1744E1,1.E0,1.25E0));\r
+-#4643=VERTEX_POINT('',#4641);\r
+-#4644=VERTEX_POINT('',#4642);\r
+-#4645=CARTESIAN_POINT('',(1.2256E1,1.5E0,1.25E0));\r
+-#4646=CARTESIAN_POINT('',(1.1744E1,1.5E0,1.25E0));\r
+-#4647=VERTEX_POINT('',#4645);\r
+-#4648=VERTEX_POINT('',#4646);\r
+-#4649=CARTESIAN_POINT('',(1.21925E1,1.E0,1.25E0));\r
+-#4650=CARTESIAN_POINT('',(1.18075E1,1.E0,1.25E0));\r
+-#4651=VERTEX_POINT('',#4649);\r
+-#4652=VERTEX_POINT('',#4650);\r
+-#4653=CARTESIAN_POINT('',(1.8256E1,1.E0,1.25E0));\r
+-#4654=CARTESIAN_POINT('',(1.7744E1,1.E0,1.25E0));\r
+-#4655=VERTEX_POINT('',#4653);\r
+-#4656=VERTEX_POINT('',#4654);\r
+-#4657=CARTESIAN_POINT('',(1.8256E1,1.5E0,1.25E0));\r
+-#4658=CARTESIAN_POINT('',(1.7744E1,1.5E0,1.25E0));\r
+-#4659=VERTEX_POINT('',#4657);\r
+-#4660=VERTEX_POINT('',#4658);\r
+-#4661=CARTESIAN_POINT('',(1.81925E1,1.E0,1.25E0));\r
+-#4662=CARTESIAN_POINT('',(1.78075E1,1.E0,1.25E0));\r
+-#4663=VERTEX_POINT('',#4661);\r
+-#4664=VERTEX_POINT('',#4662);\r
+-#4665=CARTESIAN_POINT('',(6.256E0,1.E0,3.075E1));\r
+-#4666=CARTESIAN_POINT('',(5.744E0,1.E0,3.075E1));\r
+-#4667=VERTEX_POINT('',#4665);\r
+-#4668=VERTEX_POINT('',#4666);\r
+-#4669=CARTESIAN_POINT('',(6.256E0,1.5E0,3.075E1));\r
+-#4670=CARTESIAN_POINT('',(5.744E0,1.5E0,3.075E1));\r
+-#4671=VERTEX_POINT('',#4669);\r
+-#4672=VERTEX_POINT('',#4670);\r
+-#4673=CARTESIAN_POINT('',(6.1925E0,1.E0,3.075E1));\r
+-#4674=CARTESIAN_POINT('',(5.8075E0,1.E0,3.075E1));\r
+-#4675=VERTEX_POINT('',#4673);\r
+-#4676=VERTEX_POINT('',#4674);\r
+-#4677=CARTESIAN_POINT('',(1.2256E1,1.E0,3.075E1));\r
+-#4678=CARTESIAN_POINT('',(1.1744E1,1.E0,3.075E1));\r
+-#4679=VERTEX_POINT('',#4677);\r
+-#4680=VERTEX_POINT('',#4678);\r
+-#4681=CARTESIAN_POINT('',(1.2256E1,1.5E0,3.075E1));\r
+-#4682=CARTESIAN_POINT('',(1.1744E1,1.5E0,3.075E1));\r
+-#4683=VERTEX_POINT('',#4681);\r
+-#4684=VERTEX_POINT('',#4682);\r
+-#4685=CARTESIAN_POINT('',(1.21925E1,1.E0,3.075E1));\r
+-#4686=CARTESIAN_POINT('',(1.18075E1,1.E0,3.075E1));\r
+-#4687=VERTEX_POINT('',#4685);\r
+-#4688=VERTEX_POINT('',#4686);\r
+-#4689=CARTESIAN_POINT('',(1.8256E1,1.E0,3.075E1));\r
+-#4690=CARTESIAN_POINT('',(1.7744E1,1.E0,3.075E1));\r
+-#4691=VERTEX_POINT('',#4689);\r
+-#4692=VERTEX_POINT('',#4690);\r
+-#4693=CARTESIAN_POINT('',(1.8256E1,1.5E0,3.075E1));\r
+-#4694=CARTESIAN_POINT('',(1.7744E1,1.5E0,3.075E1));\r
+-#4695=VERTEX_POINT('',#4693);\r
+-#4696=VERTEX_POINT('',#4694);\r
+-#4697=CARTESIAN_POINT('',(1.81925E1,1.E0,3.075E1));\r
+-#4698=CARTESIAN_POINT('',(1.78075E1,1.E0,3.075E1));\r
+-#4699=VERTEX_POINT('',#4697);\r
+-#4700=VERTEX_POINT('',#4698);\r
+-#4701=CARTESIAN_POINT('',(4.4125E0,1.05E1,8.E0));\r
+-#4702=CARTESIAN_POINT('',(4.0875E0,1.05E1,8.E0));\r
+-#4703=VERTEX_POINT('',#4701);\r
+-#4704=VERTEX_POINT('',#4702);\r
+-#4705=CARTESIAN_POINT('',(4.4125E0,1.05E1,1.E1));\r
+-#4706=CARTESIAN_POINT('',(4.0875E0,1.05E1,1.E1));\r
+-#4707=VERTEX_POINT('',#4705);\r
+-#4708=VERTEX_POINT('',#4706);\r
+-#4709=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.25E0));\r
+-#4710=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.25E0));\r
+-#4711=VERTEX_POINT('',#4709);\r
+-#4712=VERTEX_POINT('',#4710);\r
+-#4713=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.E0));\r
+-#4714=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.E0));\r
+-#4715=VERTEX_POINT('',#4713);\r
+-#4716=VERTEX_POINT('',#4714);\r
+-#4717=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.25E0));\r
+-#4718=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.25E0));\r
+-#4719=VERTEX_POINT('',#4717);\r
+-#4720=VERTEX_POINT('',#4718);\r
+-#4721=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.E0));\r
+-#4722=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.E0));\r
+-#4723=VERTEX_POINT('',#4721);\r
+-#4724=VERTEX_POINT('',#4722);\r
+-#4725=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.25E0));\r
+-#4726=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.25E0));\r
+-#4727=VERTEX_POINT('',#4725);\r
+-#4728=VERTEX_POINT('',#4726);\r
+-#4729=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.E0));\r
+-#4730=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.E0));\r
+-#4731=VERTEX_POINT('',#4729);\r
+-#4732=VERTEX_POINT('',#4730);\r
+-#4733=CARTESIAN_POINT('',(1.95875E1,1.05E1,8.E0));\r
+-#4734=CARTESIAN_POINT('',(1.99125E1,1.05E1,8.E0));\r
+-#4735=VERTEX_POINT('',#4733);\r
+-#4736=VERTEX_POINT('',#4734);\r
+-#4737=CARTESIAN_POINT('',(1.95875E1,1.05E1,1.E1));\r
+-#4738=CARTESIAN_POINT('',(1.99125E1,1.05E1,1.E1));\r
+-#4739=VERTEX_POINT('',#4737);\r
+-#4740=VERTEX_POINT('',#4738);\r
+-#4741=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.25E0));\r
+-#4742=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.25E0));\r
+-#4743=VERTEX_POINT('',#4741);\r
+-#4744=VERTEX_POINT('',#4742);\r
+-#4745=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.E0));\r
+-#4746=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.E0));\r
+-#4747=VERTEX_POINT('',#4745);\r
+-#4748=VERTEX_POINT('',#4746);\r
+-#4749=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.25E0));\r
+-#4750=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.25E0));\r
+-#4751=VERTEX_POINT('',#4749);\r
+-#4752=VERTEX_POINT('',#4750);\r
+-#4753=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.E0));\r
+-#4754=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.E0));\r
+-#4755=VERTEX_POINT('',#4753);\r
+-#4756=VERTEX_POINT('',#4754);\r
+-#4757=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.25E0));\r
+-#4758=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.25E0));\r
+-#4759=VERTEX_POINT('',#4757);\r
+-#4760=VERTEX_POINT('',#4758);\r
+-#4761=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.E0));\r
+-#4762=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.E0));\r
+-#4763=VERTEX_POINT('',#4761);\r
+-#4764=VERTEX_POINT('',#4762);\r
+-#4765=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));\r
+-#4766=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));\r
+-#4767=VERTEX_POINT('',#4765);\r
+-#4768=VERTEX_POINT('',#4766);\r
+-#4769=CARTESIAN_POINT('',(5.E0,1.5E0,1.1E1));\r
+-#4770=CARTESIAN_POINT('',(5.E0,0.E0,1.1E1));\r
+-#4771=VERTEX_POINT('',#4769);\r
+-#4772=VERTEX_POINT('',#4770);\r
+-#4773=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));\r
+-#4774=CARTESIAN_POINT('',(6.E0,0.E0,1.E1));\r
+-#4775=VERTEX_POINT('',#4773);\r
+-#4776=VERTEX_POINT('',#4774);\r
+-#4777=CARTESIAN_POINT('',(1.9E1,0.E0,1.1E1));\r
+-#4778=CARTESIAN_POINT('',(1.9E1,1.5E0,1.1E1));\r
+-#4779=VERTEX_POINT('',#4777);\r
+-#4780=VERTEX_POINT('',#4778);\r
+-#4781=CARTESIAN_POINT('',(1.8E1,0.E0,1.E1));\r
+-#4782=CARTESIAN_POINT('',(1.8E1,1.5E0,1.E1));\r
+-#4783=VERTEX_POINT('',#4781);\r
+-#4784=VERTEX_POINT('',#4782);\r
+-#4785=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));\r
+-#4786=VERTEX_POINT('',#4785);\r
+-#4787=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));\r
+-#4788=VERTEX_POINT('',#4787);\r
+-#4789=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));\r
+-#4790=CARTESIAN_POINT('',(2.5E0,0.E0,2.19375E1));\r
+-#4791=VERTEX_POINT('',#4789);\r
+-#4792=VERTEX_POINT('',#4790);\r
+-#4793=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));\r
+-#4794=CARTESIAN_POINT('',(5.5E0,0.E0,1.89375E1));\r
+-#4795=VERTEX_POINT('',#4793);\r
+-#4796=VERTEX_POINT('',#4794);\r
+-#4797=CARTESIAN_POINT('',(2.15E1,0.E0,2.19375E1));\r
+-#4798=CARTESIAN_POINT('',(2.15E1,1.5E0,2.19375E1));\r
+-#4799=VERTEX_POINT('',#4797);\r
+-#4800=VERTEX_POINT('',#4798);\r
+-#4801=CARTESIAN_POINT('',(1.85E1,0.E0,1.89375E1));\r
+-#4802=CARTESIAN_POINT('',(1.85E1,1.5E0,1.89375E1));\r
+-#4803=VERTEX_POINT('',#4801);\r
+-#4804=VERTEX_POINT('',#4802);\r
+-#4805=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));\r
+-#4806=CARTESIAN_POINT('',(2.15E1,0.E0,1.40625E1));\r
+-#4807=VERTEX_POINT('',#4805);\r
+-#4808=VERTEX_POINT('',#4806);\r
+-#4809=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));\r
+-#4810=CARTESIAN_POINT('',(1.85E1,0.E0,1.70625E1));\r
+-#4811=VERTEX_POINT('',#4809);\r
+-#4812=VERTEX_POINT('',#4810);\r
+-#4813=CARTESIAN_POINT('',(2.5E0,0.E0,1.40625E1));\r
+-#4814=CARTESIAN_POINT('',(2.5E0,1.5E0,1.40625E1));\r
+-#4815=VERTEX_POINT('',#4813);\r
+-#4816=VERTEX_POINT('',#4814);\r
+-#4817=CARTESIAN_POINT('',(5.5E0,0.E0,1.70625E1));\r
+-#4818=CARTESIAN_POINT('',(5.5E0,1.5E0,1.70625E1));\r
+-#4819=VERTEX_POINT('',#4817);\r
+-#4820=VERTEX_POINT('',#4818);\r
+-#4821=CARTESIAN_POINT('',(6.1925E0,0.E0,9.E0));\r
+-#4822=CARTESIAN_POINT('',(5.8075E0,0.E0,9.E0));\r
+-#4823=VERTEX_POINT('',#4821);\r
+-#4824=VERTEX_POINT('',#4822);\r
+-#4825=CARTESIAN_POINT('',(6.2575E0,1.E0,9.E0));\r
+-#4826=CARTESIAN_POINT('',(5.7425E0,1.E0,9.E0));\r
+-#4827=VERTEX_POINT('',#4825);\r
+-#4828=VERTEX_POINT('',#4826);\r
+-#4829=CARTESIAN_POINT('',(6.2575E0,1.5E0,9.E0));\r
+-#4830=CARTESIAN_POINT('',(5.7425E0,1.5E0,9.E0));\r
+-#4831=VERTEX_POINT('',#4829);\r
+-#4832=VERTEX_POINT('',#4830);\r
+-#4833=CARTESIAN_POINT('',(6.1925E0,1.E0,9.E0));\r
+-#4834=CARTESIAN_POINT('',(5.8075E0,1.E0,9.E0));\r
+-#4835=VERTEX_POINT('',#4833);\r
+-#4836=VERTEX_POINT('',#4834);\r
+-#4837=CARTESIAN_POINT('',(1.21925E1,0.E0,9.E0));\r
+-#4838=CARTESIAN_POINT('',(1.18075E1,0.E0,9.E0));\r
+-#4839=VERTEX_POINT('',#4837);\r
+-#4840=VERTEX_POINT('',#4838);\r
+-#4841=CARTESIAN_POINT('',(1.81925E1,0.E0,9.E0));\r
+-#4842=CARTESIAN_POINT('',(1.78075E1,0.E0,9.E0));\r
+-#4843=VERTEX_POINT('',#4841);\r
+-#4844=VERTEX_POINT('',#4842);\r
+-#4845=CARTESIAN_POINT('',(6.1925E0,0.E0,1.8E1));\r
+-#4846=CARTESIAN_POINT('',(5.8075E0,0.E0,1.8E1));\r
+-#4847=VERTEX_POINT('',#4845);\r
+-#4848=VERTEX_POINT('',#4846);\r
+-#4849=CARTESIAN_POINT('',(1.21925E1,0.E0,1.8E1));\r
+-#4850=CARTESIAN_POINT('',(1.18075E1,0.E0,1.8E1));\r
+-#4851=VERTEX_POINT('',#4849);\r
+-#4852=VERTEX_POINT('',#4850);\r
+-#4853=CARTESIAN_POINT('',(1.81925E1,0.E0,1.8E1));\r
+-#4854=CARTESIAN_POINT('',(1.78075E1,0.E0,1.8E1));\r
+-#4855=VERTEX_POINT('',#4853);\r
+-#4856=VERTEX_POINT('',#4854);\r
+-#4857=CARTESIAN_POINT('',(1.22575E1,1.E0,9.E0));\r
+-#4858=CARTESIAN_POINT('',(1.17425E1,1.E0,9.E0));\r
+-#4859=VERTEX_POINT('',#4857);\r
+-#4860=VERTEX_POINT('',#4858);\r
+-#4861=CARTESIAN_POINT('',(1.22575E1,1.5E0,9.E0));\r
+-#4862=CARTESIAN_POINT('',(1.17425E1,1.5E0,9.E0));\r
+-#4863=VERTEX_POINT('',#4861);\r
+-#4864=VERTEX_POINT('',#4862);\r
+-#4865=CARTESIAN_POINT('',(1.21925E1,1.E0,9.E0));\r
+-#4866=CARTESIAN_POINT('',(1.18075E1,1.E0,9.E0));\r
+-#4867=VERTEX_POINT('',#4865);\r
+-#4868=VERTEX_POINT('',#4866);\r
+-#4869=CARTESIAN_POINT('',(1.82575E1,1.E0,9.E0));\r
+-#4870=CARTESIAN_POINT('',(1.77425E1,1.E0,9.E0));\r
+-#4871=VERTEX_POINT('',#4869);\r
+-#4872=VERTEX_POINT('',#4870);\r
+-#4873=CARTESIAN_POINT('',(1.82575E1,1.5E0,9.E0));\r
+-#4874=CARTESIAN_POINT('',(1.77425E1,1.5E0,9.E0));\r
+-#4875=VERTEX_POINT('',#4873);\r
+-#4876=VERTEX_POINT('',#4874);\r
+-#4877=CARTESIAN_POINT('',(1.81925E1,1.E0,9.E0));\r
+-#4878=CARTESIAN_POINT('',(1.78075E1,1.E0,9.E0));\r
+-#4879=VERTEX_POINT('',#4877);\r
+-#4880=VERTEX_POINT('',#4878);\r
+-#4881=CARTESIAN_POINT('',(6.2575E0,1.E0,1.8E1));\r
+-#4882=CARTESIAN_POINT('',(5.7425E0,1.E0,1.8E1));\r
+-#4883=VERTEX_POINT('',#4881);\r
+-#4884=VERTEX_POINT('',#4882);\r
+-#4885=CARTESIAN_POINT('',(6.2575E0,1.5E0,1.8E1));\r
+-#4886=CARTESIAN_POINT('',(5.7425E0,1.5E0,1.8E1));\r
+-#4887=VERTEX_POINT('',#4885);\r
+-#4888=VERTEX_POINT('',#4886);\r
+-#4889=CARTESIAN_POINT('',(6.1925E0,1.E0,1.8E1));\r
+-#4890=CARTESIAN_POINT('',(5.8075E0,1.E0,1.8E1));\r
+-#4891=VERTEX_POINT('',#4889);\r
+-#4892=VERTEX_POINT('',#4890);\r
+-#4893=CARTESIAN_POINT('',(1.22575E1,1.E0,1.8E1));\r
+-#4894=CARTESIAN_POINT('',(1.17425E1,1.E0,1.8E1));\r
+-#4895=VERTEX_POINT('',#4893);\r
+-#4896=VERTEX_POINT('',#4894);\r
+-#4897=CARTESIAN_POINT('',(1.22575E1,1.5E0,1.8E1));\r
+-#4898=CARTESIAN_POINT('',(1.17425E1,1.5E0,1.8E1));\r
+-#4899=VERTEX_POINT('',#4897);\r
+-#4900=VERTEX_POINT('',#4898);\r
+-#4901=CARTESIAN_POINT('',(1.21925E1,1.E0,1.8E1));\r
+-#4902=CARTESIAN_POINT('',(1.18075E1,1.E0,1.8E1));\r
+-#4903=VERTEX_POINT('',#4901);\r
+-#4904=VERTEX_POINT('',#4902);\r
+-#4905=CARTESIAN_POINT('',(1.82575E1,1.E0,1.8E1));\r
+-#4906=CARTESIAN_POINT('',(1.77425E1,1.E0,1.8E1));\r
+-#4907=VERTEX_POINT('',#4905);\r
+-#4908=VERTEX_POINT('',#4906);\r
+-#4909=CARTESIAN_POINT('',(1.82575E1,1.5E0,1.8E1));\r
+-#4910=CARTESIAN_POINT('',(1.77425E1,1.5E0,1.8E1));\r
+-#4911=VERTEX_POINT('',#4909);\r
+-#4912=VERTEX_POINT('',#4910);\r
+-#4913=CARTESIAN_POINT('',(1.81925E1,1.E0,1.8E1));\r
+-#4914=CARTESIAN_POINT('',(1.78075E1,1.E0,1.8E1));\r
+-#4915=VERTEX_POINT('',#4913);\r
+-#4916=VERTEX_POINT('',#4914);\r
+-#4917=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));\r
+-#4918=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.E1));\r
+-#4919=VERTEX_POINT('',#4917);\r
+-#4920=VERTEX_POINT('',#4918);\r
+-#4921=CARTESIAN_POINT('',(2.E0,1.5E0,1.288675134595E1));\r
+-#4922=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));\r
+-#4923=VERTEX_POINT('',#4921);\r
+-#4924=VERTEX_POINT('',#4922);\r
+-#4925=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));\r
+-#4926=VERTEX_POINT('',#4925);\r
+-#4927=CARTESIAN_POINT('',(2.E0,6.5E0,1.E1));\r
+-#4928=VERTEX_POINT('',#4927);\r
+-#4929=VERTEX_POINT('',#1837);\r
+-#4930=VERTEX_POINT('',#1845);\r
+-#4931=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));\r
+-#4932=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));\r
+-#4933=VERTEX_POINT('',#4931);\r
+-#4934=VERTEX_POINT('',#4932);\r
+-#4935=CARTESIAN_POINT('',(2.2E1,1.5E0,1.288675134595E1));\r
+-#4936=CARTESIAN_POINT('',(2.2E1,1.5E0,1.E1));\r
+-#4937=VERTEX_POINT('',#4935);\r
+-#4938=VERTEX_POINT('',#4936);\r
+-#4939=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));\r
+-#4940=VERTEX_POINT('',#4939);\r
+-#4941=CARTESIAN_POINT('',(2.2E1,6.5E0,1.E1));\r
+-#4942=VERTEX_POINT('',#4941);\r
+-#4943=VERTEX_POINT('',#2873);\r
+-#4944=VERTEX_POINT('',#2881);\r
+-#4945=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));\r
+-#4946=CARTESIAN_POINT('',(3.75E0,2.E0,8.5E0));\r
+-#4947=VERTEX_POINT('',#4945);\r
+-#4948=VERTEX_POINT('',#4946);\r
+-#4949=CARTESIAN_POINT('',(4.5E0,2.75E0,8.E0));\r
+-#4950=CARTESIAN_POINT('',(4.5E0,2.75E0,8.5E0));\r
+-#4951=VERTEX_POINT('',#4949);\r
+-#4952=VERTEX_POINT('',#4950);\r
+-#4953=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));\r
+-#4954=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.5E0));\r
+-#4955=VERTEX_POINT('',#4953);\r
+-#4956=VERTEX_POINT('',#4954);\r
+-#4957=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.E0));\r
+-#4958=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.5E0));\r
+-#4959=VERTEX_POINT('',#4957);\r
+-#4960=VERTEX_POINT('',#4958);\r
+-#4961=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));\r
+-#4962=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.5E0));\r
+-#4963=VERTEX_POINT('',#4961);\r
+-#4964=VERTEX_POINT('',#4962);\r
+-#4965=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.E0));\r
+-#4966=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.5E0));\r
+-#4967=VERTEX_POINT('',#4965);\r
+-#4968=VERTEX_POINT('',#4966);\r
+-#4969=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));\r
+-#4970=CARTESIAN_POINT('',(4.5E0,8.75E0,8.5E0));\r
+-#4971=VERTEX_POINT('',#4969);\r
+-#4972=VERTEX_POINT('',#4970);\r
+-#4973=CARTESIAN_POINT('',(3.75E0,9.5E0,8.E0));\r
+-#4974=CARTESIAN_POINT('',(3.75E0,9.5E0,8.5E0));\r
+-#4975=VERTEX_POINT('',#4973);\r
+-#4976=VERTEX_POINT('',#4974);\r
+-#4977=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));\r
+-#4978=CARTESIAN_POINT('',(2.85E0,2.E0,9.5E0));\r
+-#4979=VERTEX_POINT('',#4977);\r
+-#4980=VERTEX_POINT('',#4978);\r
+-#4981=CARTESIAN_POINT('',(2.5E0,2.35E0,1.E1));\r
+-#4982=CARTESIAN_POINT('',(2.5E0,2.35E0,9.5E0));\r
+-#4983=VERTEX_POINT('',#4981);\r
+-#4984=VERTEX_POINT('',#4982);\r
+-#4985=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));\r
+-#4986=CARTESIAN_POINT('',(4.5E0,2.35E0,9.5E0));\r
+-#4987=VERTEX_POINT('',#4985);\r
+-#4988=VERTEX_POINT('',#4986);\r
+-#4989=CARTESIAN_POINT('',(4.15E0,2.E0,1.E1));\r
+-#4990=CARTESIAN_POINT('',(4.15E0,2.E0,9.5E0));\r
+-#4991=VERTEX_POINT('',#4989);\r
+-#4992=VERTEX_POINT('',#4990);\r
+-#4993=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));\r
+-#4994=CARTESIAN_POINT('',(1.952799239454E0,7.E0,9.5E0));\r
+-#4995=VERTEX_POINT('',#4993);\r
+-#4996=VERTEX_POINT('',#4994);\r
+-#4997=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,1.E1));\r
+-#4998=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,9.5E0));\r
+-#4999=VERTEX_POINT('',#4997);\r
+-#5000=VERTEX_POINT('',#4998);\r
+-#5001=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));\r
+-#5002=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,9.5E0));\r
+-#5003=VERTEX_POINT('',#5001);\r
+-#5004=VERTEX_POINT('',#5002);\r
+-#5005=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,1.E1));\r
+-#5006=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,9.5E0));\r
+-#5007=VERTEX_POINT('',#5005);\r
+-#5008=VERTEX_POINT('',#5006);\r
+-#5009=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));\r
+-#5010=CARTESIAN_POINT('',(4.15E0,9.5E0,9.5E0));\r
+-#5011=VERTEX_POINT('',#5009);\r
+-#5012=VERTEX_POINT('',#5010);\r
+-#5013=CARTESIAN_POINT('',(4.5E0,9.15E0,1.E1));\r
+-#5014=CARTESIAN_POINT('',(4.5E0,9.15E0,9.5E0));\r
+-#5015=VERTEX_POINT('',#5013);\r
+-#5016=VERTEX_POINT('',#5014);\r
+-#5017=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));\r
+-#5018=CARTESIAN_POINT('',(2.5E0,6.65E0,1.E1));\r
+-#5019=VERTEX_POINT('',#5017);\r
+-#5020=VERTEX_POINT('',#5018);\r
+-#5021=CARTESIAN_POINT('',(2.15E0,7.E0,1.E1));\r
+-#5022=VERTEX_POINT('',#5021);\r
+-#5023=CARTESIAN_POINT('',(2.15E0,7.E0,9.5E0));\r
+-#5024=VERTEX_POINT('',#5023);\r
+-#5025=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));\r
+-#5026=CARTESIAN_POINT('',(2.025E1,2.E0,8.E0));\r
+-#5027=VERTEX_POINT('',#5025);\r
+-#5028=VERTEX_POINT('',#5026);\r
+-#5029=CARTESIAN_POINT('',(1.95E1,2.75E0,8.5E0));\r
+-#5030=VERTEX_POINT('',#5029);\r
+-#5031=CARTESIAN_POINT('',(1.95E1,2.75E0,8.E0));\r
+-#5032=VERTEX_POINT('',#5031);\r
+-#5033=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));\r
+-#5034=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.E0));\r
+-#5035=VERTEX_POINT('',#5033);\r
+-#5036=VERTEX_POINT('',#5034);\r
+-#5037=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.5E0));\r
+-#5038=VERTEX_POINT('',#5037);\r
+-#5039=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.E0));\r
+-#5040=VERTEX_POINT('',#5039);\r
+-#5041=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));\r
+-#5042=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.E0));\r
+-#5043=VERTEX_POINT('',#5041);\r
+-#5044=VERTEX_POINT('',#5042);\r
+-#5045=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.5E0));\r
+-#5046=VERTEX_POINT('',#5045);\r
+-#5047=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.E0));\r
+-#5048=VERTEX_POINT('',#5047);\r
+-#5049=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));\r
+-#5050=CARTESIAN_POINT('',(1.95E1,8.75E0,8.E0));\r
+-#5051=VERTEX_POINT('',#5049);\r
+-#5052=VERTEX_POINT('',#5050);\r
+-#5053=CARTESIAN_POINT('',(2.025E1,9.5E0,8.5E0));\r
+-#5054=VERTEX_POINT('',#5053);\r
+-#5055=CARTESIAN_POINT('',(2.025E1,9.5E0,8.E0));\r
+-#5056=VERTEX_POINT('',#5055);\r
+-#5057=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));\r
+-#5058=CARTESIAN_POINT('',(2.115E1,2.E0,1.E1));\r
+-#5059=VERTEX_POINT('',#5057);\r
+-#5060=VERTEX_POINT('',#5058);\r
+-#5061=CARTESIAN_POINT('',(2.15E1,2.35E0,9.5E0));\r
+-#5062=VERTEX_POINT('',#5061);\r
+-#5063=CARTESIAN_POINT('',(2.15E1,2.35E0,1.E1));\r
+-#5064=VERTEX_POINT('',#5063);\r
+-#5065=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));\r
+-#5066=CARTESIAN_POINT('',(1.95E1,2.35E0,1.E1));\r
+-#5067=VERTEX_POINT('',#5065);\r
+-#5068=VERTEX_POINT('',#5066);\r
+-#5069=CARTESIAN_POINT('',(1.985E1,2.E0,9.5E0));\r
+-#5070=VERTEX_POINT('',#5069);\r
+-#5071=CARTESIAN_POINT('',(1.985E1,2.E0,1.E1));\r
+-#5072=VERTEX_POINT('',#5071);\r
+-#5073=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));\r
+-#5074=CARTESIAN_POINT('',(2.204720076055E1,7.E0,1.E1));\r
+-#5075=VERTEX_POINT('',#5073);\r
+-#5076=VERTEX_POINT('',#5074);\r
+-#5077=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,9.5E0));\r
+-#5078=VERTEX_POINT('',#5077);\r
+-#5079=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,1.E1));\r
+-#5080=VERTEX_POINT('',#5079);\r
+-#5081=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));\r
+-#5082=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,1.E1));\r
+-#5083=VERTEX_POINT('',#5081);\r
+-#5084=VERTEX_POINT('',#5082);\r
+-#5085=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,9.5E0));\r
+-#5086=VERTEX_POINT('',#5085);\r
+-#5087=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,1.E1));\r
+-#5088=VERTEX_POINT('',#5087);\r
+-#5089=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));\r
+-#5090=CARTESIAN_POINT('',(1.985E1,9.5E0,1.E1));\r
+-#5091=VERTEX_POINT('',#5089);\r
+-#5092=VERTEX_POINT('',#5090);\r
+-#5093=CARTESIAN_POINT('',(1.95E1,9.15E0,9.5E0));\r
+-#5094=VERTEX_POINT('',#5093);\r
+-#5095=CARTESIAN_POINT('',(1.95E1,9.15E0,1.E1));\r
+-#5096=VERTEX_POINT('',#5095);\r
+-#5097=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));\r
+-#5098=CARTESIAN_POINT('',(2.15E1,6.65E0,9.5E0));\r
+-#5099=VERTEX_POINT('',#5097);\r
+-#5100=VERTEX_POINT('',#5098);\r
+-#5101=CARTESIAN_POINT('',(2.185E1,7.E0,1.E1));\r
+-#5102=CARTESIAN_POINT('',(2.185E1,7.E0,9.5E0));\r
+-#5103=VERTEX_POINT('',#5101);\r
+-#5104=VERTEX_POINT('',#5102);\r
+-#5105=CARTESIAN_POINT('',(7.5E0,6.875E-1,6.875E-1));\r
+-#5106=CARTESIAN_POINT('',(1.05E1,6.875E-1,6.875E-1));\r
+-#5107=VERTEX_POINT('',#5105);\r
+-#5108=VERTEX_POINT('',#5106);\r
+-#5109=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8125E0));\r
+-#5110=VERTEX_POINT('',#5109);\r
+-#5111=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.8125E0));\r
+-#5112=VERTEX_POINT('',#5111);\r
+-#5113=CARTESIAN_POINT('',(3.939978538987E0,6.875E-1,1.032293285145E0));\r
+-#5114=CARTESIAN_POINT('',(4.942849714544E0,6.875E-1,2.419779663480E0));\r
+-#5115=VERTEX_POINT('',#5113);\r
+-#5116=VERTEX_POINT('',#5114);\r
+-#5117=CARTESIAN_POINT('',(2.432015885023E0,6.875E-1,4.918683812405E0));\r
+-#5118=VERTEX_POINT('',#5117);\r
+-#5119=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));\r
+-#5120=CARTESIAN_POINT('',(1.05E1,0.E0,6.875E-1));\r
+-#5121=VERTEX_POINT('',#5119);\r
+-#5122=VERTEX_POINT('',#5120);\r
+-#5123=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));\r
+-#5124=VERTEX_POINT('',#5123);\r
+-#5125=CARTESIAN_POINT('',(7.5E0,0.E0,1.8125E0));\r
+-#5126=VERTEX_POINT('',#5125);\r
+-#5127=CARTESIAN_POINT('',(3.939978538987E0,0.E0,1.032293285145E0));\r
+-#5128=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.419779663480E0));\r
+-#5129=VERTEX_POINT('',#5127);\r
+-#5130=VERTEX_POINT('',#5128);\r
+-#5131=CARTESIAN_POINT('',(2.432015885023E0,0.E0,4.918683812405E0));\r
+-#5132=VERTEX_POINT('',#5131);\r
+-#5133=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));\r
+-#5134=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,4.046865146430E0));\r
+-#5135=VERTEX_POINT('',#5133);\r
+-#5136=VERTEX_POINT('',#5134);\r
+-#5137=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,4.912826677187E0));\r
+-#5138=CARTESIAN_POINT('',(7.850270400779E-1,6.875E-1,4.912826677187E0));\r
+-#5139=VERTEX_POINT('',#5137);\r
+-#5140=VERTEX_POINT('',#5138);\r
+-#5141=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.5E0));\r
+-#5142=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.5E0));\r
+-#5143=VERTEX_POINT('',#5141);\r
+-#5144=VERTEX_POINT('',#5142);\r
+-#5145=CARTESIAN_POINT('',(6.9E-1,0.E0,7.5E0));\r
+-#5146=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));\r
+-#5147=VERTEX_POINT('',#5145);\r
+-#5148=VERTEX_POINT('',#5146);\r
+-#5149=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));\r
+-#5150=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,1.0375E1));\r
+-#5151=VERTEX_POINT('',#5149);\r
+-#5152=VERTEX_POINT('',#5150);\r
+-#5153=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.125E1));\r
+-#5154=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,1.125E1));\r
+-#5155=VERTEX_POINT('',#5153);\r
+-#5156=VERTEX_POINT('',#5154);\r
+-#5157=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));\r
+-#5158=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,8.69E0));\r
+-#5159=VERTEX_POINT('',#5157);\r
+-#5160=VERTEX_POINT('',#5158);\r
+-#5161=CARTESIAN_POINT('',(-1.3125E0,0.E0,9.565E0));\r
+-#5162=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,9.565E0));\r
+-#5163=VERTEX_POINT('',#5161);\r
+-#5164=VERTEX_POINT('',#5162);\r
+-#5165=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));\r
+-#5166=CARTESIAN_POINT('',(4.3125E0,6.875E-1,9.565E0));\r
+-#5167=VERTEX_POINT('',#5165);\r
+-#5168=VERTEX_POINT('',#5166);\r
+-#5169=CARTESIAN_POINT('',(3.4375E0,0.E0,8.69E0));\r
+-#5170=CARTESIAN_POINT('',(3.4375E0,6.875E-1,8.69E0));\r
+-#5171=VERTEX_POINT('',#5169);\r
+-#5172=VERTEX_POINT('',#5170);\r
+-#5173=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));\r
+-#5174=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.125E1));\r
+-#5175=VERTEX_POINT('',#5173);\r
+-#5176=VERTEX_POINT('',#5174);\r
+-#5177=CARTESIAN_POINT('',(4.3125E0,0.E0,1.0375E1));\r
+-#5178=CARTESIAN_POINT('',(4.3125E0,6.875E-1,1.0375E1));\r
+-#5179=VERTEX_POINT('',#5177);\r
+-#5180=VERTEX_POINT('',#5178);\r
+-#5181=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));\r
+-#5182=CARTESIAN_POINT('',(6.9E-1,0.E0,7.815E0));\r
+-#5183=VERTEX_POINT('',#5181);\r
+-#5184=VERTEX_POINT('',#5182);\r
+-#5185=CARTESIAN_POINT('',(-1.85E-1,0.E0,8.69E0));\r
+-#5186=VERTEX_POINT('',#5185);\r
+-#5187=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,8.69E0));\r
+-#5188=VERTEX_POINT('',#5187);\r
+-#5189=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));\r
+-#5190=CARTESIAN_POINT('',(2.6875E0,0.E0,8.69E0));\r
+-#5191=VERTEX_POINT('',#5189);\r
+-#5192=VERTEX_POINT('',#5190);\r
+-#5193=CARTESIAN_POINT('',(1.8125E0,0.E0,7.815E0));\r
+-#5194=VERTEX_POINT('',#5193);\r
+-#5195=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.815E0));\r
+-#5196=VERTEX_POINT('',#5195);\r
+-#5197=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.65E1));\r
+-#5198=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.35E1));\r
+-#5199=VERTEX_POINT('',#5197);\r
+-#5200=VERTEX_POINT('',#5198);\r
+-#5201=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.35E1));\r
+-#5202=VERTEX_POINT('',#5201);\r
+-#5203=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.65E1));\r
+-#5204=VERTEX_POINT('',#5203);\r
+-#5205=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));\r
+-#5206=CARTESIAN_POINT('',(6.875E-1,0.E0,1.35E1));\r
+-#5207=VERTEX_POINT('',#5205);\r
+-#5208=VERTEX_POINT('',#5206);\r
+-#5209=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));\r
+-#5210=VERTEX_POINT('',#5209);\r
+-#5211=CARTESIAN_POINT('',(1.8125E0,0.E0,1.65E1));\r
+-#5212=VERTEX_POINT('',#5211);\r
+-#5213=CARTESIAN_POINT('',(6.875E-1,6.875E-1,2.25E1));\r
+-#5214=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.95E1));\r
+-#5215=VERTEX_POINT('',#5213);\r
+-#5216=VERTEX_POINT('',#5214);\r
+-#5217=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.95E1));\r
+-#5218=VERTEX_POINT('',#5217);\r
+-#5219=CARTESIAN_POINT('',(1.8125E0,6.875E-1,2.25E1));\r
+-#5220=VERTEX_POINT('',#5219);\r
+-#5221=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));\r
+-#5222=CARTESIAN_POINT('',(6.875E-1,0.E0,1.95E1));\r
+-#5223=VERTEX_POINT('',#5221);\r
+-#5224=VERTEX_POINT('',#5222);\r
+-#5225=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));\r
+-#5226=VERTEX_POINT('',#5225);\r
+-#5227=CARTESIAN_POINT('',(1.8125E0,0.E0,2.25E1));\r
+-#5228=VERTEX_POINT('',#5227);\r
+-#5229=CARTESIAN_POINT('',(7.5E0,6.875E-1,8.5E0));\r
+-#5230=CARTESIAN_POINT('',(1.05E1,6.875E-1,8.5E0));\r
+-#5231=VERTEX_POINT('',#5229);\r
+-#5232=VERTEX_POINT('',#5230);\r
+-#5233=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.5E0));\r
+-#5234=VERTEX_POINT('',#5233);\r
+-#5235=CARTESIAN_POINT('',(7.5E0,6.875E-1,9.5E0));\r
+-#5236=VERTEX_POINT('',#5235);\r
+-#5237=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));\r
+-#5238=CARTESIAN_POINT('',(1.05E1,0.E0,8.5E0));\r
+-#5239=VERTEX_POINT('',#5237);\r
+-#5240=VERTEX_POINT('',#5238);\r
+-#5241=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));\r
+-#5242=VERTEX_POINT('',#5241);\r
+-#5243=CARTESIAN_POINT('',(7.5E0,0.E0,9.5E0));\r
+-#5244=VERTEX_POINT('',#5243);\r
+-#5245=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.75625E1));\r
+-#5246=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.75625E1));\r
+-#5247=VERTEX_POINT('',#5245);\r
+-#5248=VERTEX_POINT('',#5246);\r
+-#5249=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.84375E1));\r
+-#5250=VERTEX_POINT('',#5249);\r
+-#5251=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.84375E1));\r
+-#5252=VERTEX_POINT('',#5251);\r
+-#5253=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));\r
+-#5254=CARTESIAN_POINT('',(1.05E1,0.E0,1.75625E1));\r
+-#5255=VERTEX_POINT('',#5253);\r
+-#5256=VERTEX_POINT('',#5254);\r
+-#5257=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));\r
+-#5258=VERTEX_POINT('',#5257);\r
+-#5259=CARTESIAN_POINT('',(7.5E0,0.E0,1.84375E1));\r
+-#5260=VERTEX_POINT('',#5259);\r
+-#5261=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.13125E1));\r
+-#5262=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.13125E1));\r
+-#5263=VERTEX_POINT('',#5261);\r
+-#5264=VERTEX_POINT('',#5262);\r
+-#5265=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.01875E1));\r
+-#5266=VERTEX_POINT('',#5265);\r
+-#5267=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.01875E1));\r
+-#5268=VERTEX_POINT('',#5267);\r
+-#5269=CARTESIAN_POINT('',(3.939978538987E0,6.875E-1,3.096770671486E1));\r
+-#5270=CARTESIAN_POINT('',(4.942849714544E0,6.875E-1,2.958022033652E1));\r
+-#5271=VERTEX_POINT('',#5269);\r
+-#5272=VERTEX_POINT('',#5270);\r
+-#5273=CARTESIAN_POINT('',(2.432015885023E0,6.875E-1,2.708131618759E1));\r
+-#5274=VERTEX_POINT('',#5273);\r
+-#5275=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));\r
+-#5276=CARTESIAN_POINT('',(1.05E1,0.E0,3.13125E1));\r
+-#5277=VERTEX_POINT('',#5275);\r
+-#5278=VERTEX_POINT('',#5276);\r
+-#5279=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));\r
+-#5280=VERTEX_POINT('',#5279);\r
+-#5281=CARTESIAN_POINT('',(7.5E0,0.E0,3.01875E1));\r
+-#5282=VERTEX_POINT('',#5281);\r
+-#5283=CARTESIAN_POINT('',(3.939978538987E0,0.E0,3.096770671486E1));\r
+-#5284=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.958022033652E1));\r
+-#5285=VERTEX_POINT('',#5283);\r
+-#5286=VERTEX_POINT('',#5284);\r
+-#5287=CARTESIAN_POINT('',(2.432015885023E0,0.E0,2.708131618759E1));\r
+-#5288=VERTEX_POINT('',#5287);\r
+-#5289=CARTESIAN_POINT('',(1.65E1,6.875E-1,6.875E-1));\r
+-#5290=CARTESIAN_POINT('',(1.35E1,6.875E-1,6.875E-1));\r
+-#5291=VERTEX_POINT('',#5289);\r
+-#5292=VERTEX_POINT('',#5290);\r
+-#5293=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8125E0));\r
+-#5294=VERTEX_POINT('',#5293);\r
+-#5295=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.8125E0));\r
+-#5296=VERTEX_POINT('',#5295);\r
+-#5297=CARTESIAN_POINT('',(2.006002146101E1,6.875E-1,1.032293285145E0));\r
+-#5298=CARTESIAN_POINT('',(1.905715028546E1,6.875E-1,2.419779663480E0));\r
+-#5299=VERTEX_POINT('',#5297);\r
+-#5300=VERTEX_POINT('',#5298);\r
+-#5301=CARTESIAN_POINT('',(2.156798411498E1,6.875E-1,4.918683812405E0));\r
+-#5302=VERTEX_POINT('',#5301);\r
+-#5303=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));\r
+-#5304=CARTESIAN_POINT('',(1.35E1,0.E0,6.875E-1));\r
+-#5305=VERTEX_POINT('',#5303);\r
+-#5306=VERTEX_POINT('',#5304);\r
+-#5307=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));\r
+-#5308=VERTEX_POINT('',#5307);\r
+-#5309=CARTESIAN_POINT('',(1.65E1,0.E0,1.8125E0));\r
+-#5310=VERTEX_POINT('',#5309);\r
+-#5311=CARTESIAN_POINT('',(2.006002146101E1,0.E0,1.032293285145E0));\r
+-#5312=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.419779663480E0));\r
+-#5313=VERTEX_POINT('',#5311);\r
+-#5314=VERTEX_POINT('',#5312);\r
+-#5315=CARTESIAN_POINT('',(2.156798411498E1,0.E0,4.918683812405E0));\r
+-#5316=VERTEX_POINT('',#5315);\r
+-#5317=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.5E0));\r
+-#5318=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.5E0));\r
+-#5319=VERTEX_POINT('',#5317);\r
+-#5320=VERTEX_POINT('',#5318);\r
+-#5321=CARTESIAN_POINT('',(2.331E1,0.E0,7.5E0));\r
+-#5322=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));\r
+-#5323=VERTEX_POINT('',#5321);\r
+-#5324=VERTEX_POINT('',#5322);\r
+-#5325=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.65E1));\r
+-#5326=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.35E1));\r
+-#5327=VERTEX_POINT('',#5325);\r
+-#5328=VERTEX_POINT('',#5326);\r
+-#5329=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.35E1));\r
+-#5330=VERTEX_POINT('',#5329);\r
+-#5331=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.65E1));\r
+-#5332=VERTEX_POINT('',#5331);\r
+-#5333=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));\r
+-#5334=CARTESIAN_POINT('',(2.33125E1,0.E0,1.35E1));\r
+-#5335=VERTEX_POINT('',#5333);\r
+-#5336=VERTEX_POINT('',#5334);\r
+-#5337=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));\r
+-#5338=VERTEX_POINT('',#5337);\r
+-#5339=CARTESIAN_POINT('',(2.21875E1,0.E0,1.65E1));\r
+-#5340=VERTEX_POINT('',#5339);\r
+-#5341=CARTESIAN_POINT('',(2.33125E1,6.875E-1,2.25E1));\r
+-#5342=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.95E1));\r
+-#5343=VERTEX_POINT('',#5341);\r
+-#5344=VERTEX_POINT('',#5342);\r
+-#5345=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.95E1));\r
+-#5346=VERTEX_POINT('',#5345);\r
+-#5347=CARTESIAN_POINT('',(2.21875E1,6.875E-1,2.25E1));\r
+-#5348=VERTEX_POINT('',#5347);\r
+-#5349=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));\r
+-#5350=CARTESIAN_POINT('',(2.33125E1,0.E0,1.95E1));\r
+-#5351=VERTEX_POINT('',#5349);\r
+-#5352=VERTEX_POINT('',#5350);\r
+-#5353=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));\r
+-#5354=VERTEX_POINT('',#5353);\r
+-#5355=CARTESIAN_POINT('',(2.21875E1,0.E0,2.25E1));\r
+-#5356=VERTEX_POINT('',#5355);\r
+-#5357=CARTESIAN_POINT('',(1.65E1,6.875E-1,8.5E0));\r
+-#5358=CARTESIAN_POINT('',(1.35E1,6.875E-1,8.5E0));\r
+-#5359=VERTEX_POINT('',#5357);\r
+-#5360=VERTEX_POINT('',#5358);\r
+-#5361=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.5E0));\r
+-#5362=VERTEX_POINT('',#5361);\r
+-#5363=CARTESIAN_POINT('',(1.65E1,6.875E-1,9.5E0));\r
+-#5364=VERTEX_POINT('',#5363);\r
+-#5365=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));\r
+-#5366=CARTESIAN_POINT('',(1.35E1,0.E0,8.5E0));\r
+-#5367=VERTEX_POINT('',#5365);\r
+-#5368=VERTEX_POINT('',#5366);\r
+-#5369=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));\r
+-#5370=VERTEX_POINT('',#5369);\r
+-#5371=CARTESIAN_POINT('',(1.65E1,0.E0,9.5E0));\r
+-#5372=VERTEX_POINT('',#5371);\r
+-#5373=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.75625E1));\r
+-#5374=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.75625E1));\r
+-#5375=VERTEX_POINT('',#5373);\r
+-#5376=VERTEX_POINT('',#5374);\r
+-#5377=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.84375E1));\r
+-#5378=VERTEX_POINT('',#5377);\r
+-#5379=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.84375E1));\r
+-#5380=VERTEX_POINT('',#5379);\r
+-#5381=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));\r
+-#5382=CARTESIAN_POINT('',(1.35E1,0.E0,1.75625E1));\r
+-#5383=VERTEX_POINT('',#5381);\r
+-#5384=VERTEX_POINT('',#5382);\r
+-#5385=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));\r
+-#5386=VERTEX_POINT('',#5385);\r
+-#5387=CARTESIAN_POINT('',(1.65E1,0.E0,1.84375E1));\r
+-#5388=VERTEX_POINT('',#5387);\r
+-#5389=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.13125E1));\r
+-#5390=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.13125E1));\r
+-#5391=VERTEX_POINT('',#5389);\r
+-#5392=VERTEX_POINT('',#5390);\r
+-#5393=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.01875E1));\r
+-#5394=VERTEX_POINT('',#5393);\r
+-#5395=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.01875E1));\r
+-#5396=VERTEX_POINT('',#5395);\r
+-#5397=CARTESIAN_POINT('',(2.006002146101E1,6.875E-1,3.096770671486E1));\r
+-#5398=CARTESIAN_POINT('',(1.905715028546E1,6.875E-1,2.958022033652E1));\r
+-#5399=VERTEX_POINT('',#5397);\r
+-#5400=VERTEX_POINT('',#5398);\r
+-#5401=CARTESIAN_POINT('',(2.156798411498E1,6.875E-1,2.708131618759E1));\r
+-#5402=VERTEX_POINT('',#5401);\r
+-#5403=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));\r
+-#5404=CARTESIAN_POINT('',(1.35E1,0.E0,3.13125E1));\r
+-#5405=VERTEX_POINT('',#5403);\r
+-#5406=VERTEX_POINT('',#5404);\r
+-#5407=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));\r
+-#5408=VERTEX_POINT('',#5407);\r
+-#5409=CARTESIAN_POINT('',(1.65E1,0.E0,3.01875E1));\r
+-#5410=VERTEX_POINT('',#5409);\r
+-#5411=CARTESIAN_POINT('',(2.006002146101E1,0.E0,3.096770671486E1));\r
+-#5412=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.958022033652E1));\r
+-#5413=VERTEX_POINT('',#5411);\r
+-#5414=VERTEX_POINT('',#5412);\r
+-#5415=CARTESIAN_POINT('',(2.156798411498E1,0.E0,2.708131618759E1));\r
+-#5416=VERTEX_POINT('',#5415);\r
+-#5417=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));\r
+-#5418=CARTESIAN_POINT('',(1.96875E1,0.E0,9.57E0));\r
+-#5419=VERTEX_POINT('',#5417);\r
+-#5420=VERTEX_POINT('',#5418);\r
+-#5421=CARTESIAN_POINT('',(2.05675E1,6.875E-1,8.69E0));\r
+-#5422=VERTEX_POINT('',#5421);\r
+-#5423=CARTESIAN_POINT('',(2.05675E1,0.E0,8.69E0));\r
+-#5424=VERTEX_POINT('',#5423);\r
+-#5425=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));\r
+-#5426=CARTESIAN_POINT('',(2.05675E1,0.E0,1.125E1));\r
+-#5427=VERTEX_POINT('',#5425);\r
+-#5428=VERTEX_POINT('',#5426);\r
+-#5429=CARTESIAN_POINT('',(1.96875E1,6.875E-1,1.037E1));\r
+-#5430=VERTEX_POINT('',#5429);\r
+-#5431=CARTESIAN_POINT('',(1.96875E1,0.E0,1.037E1));\r
+-#5432=VERTEX_POINT('',#5431);\r
+-#5433=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));\r
+-#5434=CARTESIAN_POINT('',(2.44325E1,0.E0,8.69E0));\r
+-#5435=VERTEX_POINT('',#5433);\r
+-#5436=VERTEX_POINT('',#5434);\r
+-#5437=CARTESIAN_POINT('',(2.53125E1,6.875E-1,9.57E0));\r
+-#5438=VERTEX_POINT('',#5437);\r
+-#5439=CARTESIAN_POINT('',(2.53125E1,0.E0,9.57E0));\r
+-#5440=VERTEX_POINT('',#5439);\r
+-#5441=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));\r
+-#5442=CARTESIAN_POINT('',(2.53125E1,0.E0,1.037E1));\r
+-#5443=VERTEX_POINT('',#5441);\r
+-#5444=VERTEX_POINT('',#5442);\r
+-#5445=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.125E1));\r
+-#5446=VERTEX_POINT('',#5445);\r
+-#5447=CARTESIAN_POINT('',(2.44325E1,0.E0,1.125E1));\r
+-#5448=VERTEX_POINT('',#5447);\r
+-#5449=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));\r
+-#5450=CARTESIAN_POINT('',(2.13075E1,6.875E-1,8.69E0));\r
+-#5451=VERTEX_POINT('',#5449);\r
+-#5452=VERTEX_POINT('',#5450);\r
+-#5453=CARTESIAN_POINT('',(2.21875E1,0.E0,7.81E0));\r
+-#5454=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.81E0));\r
+-#5455=VERTEX_POINT('',#5453);\r
+-#5456=VERTEX_POINT('',#5454);\r
+-#5457=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));\r
+-#5458=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.81E0));\r
+-#5459=VERTEX_POINT('',#5457);\r
+-#5460=VERTEX_POINT('',#5458);\r
+-#5461=CARTESIAN_POINT('',(2.419E1,0.E0,8.69E0));\r
+-#5462=CARTESIAN_POINT('',(2.419E1,6.875E-1,8.69E0));\r
+-#5463=VERTEX_POINT('',#5461);\r
+-#5464=VERTEX_POINT('',#5462);\r
+-#5465=CARTESIAN_POINT('',(2.321497295992E1,0.E0,4.912826677187E0));\r
+-#5466=CARTESIAN_POINT('',(2.321497295992E1,6.875E-1,4.912826677187E0));\r
+-#5467=VERTEX_POINT('',#5465);\r
+-#5468=VERTEX_POINT('',#5466);\r
+-#5469=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));\r
+-#5470=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,4.046865146430E0));\r
+-#5471=VERTEX_POINT('',#5469);\r
+-#5472=VERTEX_POINT('',#5470);\r
+-#5473=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,2.708717332281E1));\r
+-#5474=CARTESIAN_POINT('',(7.850270400779E-1,6.875E-1,2.708717332281E1));\r
+-#5475=VERTEX_POINT('',#5473);\r
+-#5476=VERTEX_POINT('',#5474);\r
+-#5477=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));\r
+-#5478=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,2.795313485357E1));\r
+-#5479=VERTEX_POINT('',#5477);\r
+-#5480=VERTEX_POINT('',#5478);\r
+-#5481=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));\r
+-#5482=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,2.795313485357E1));\r
+-#5483=VERTEX_POINT('',#5481);\r
+-#5484=VERTEX_POINT('',#5482);\r
+-#5485=CARTESIAN_POINT('',(2.321497295992E1,0.E0,2.708717332281E1));\r
+-#5486=CARTESIAN_POINT('',(2.321497295992E1,6.875E-1,2.708717332281E1));\r
+-#5487=VERTEX_POINT('',#5485);\r
+-#5488=VERTEX_POINT('',#5486);\r
+-#5489=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));\r
+-#5490=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#5491=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#5492=AXIS2_PLACEMENT_3D('',#5489,#5490,#5491);\r
+-#5493=PLANE('',#5492);\r
+-#5495=ORIENTED_EDGE('',*,*,#5494,.F.);\r
+-#5497=ORIENTED_EDGE('',*,*,#5496,.F.);\r
+-#5499=ORIENTED_EDGE('',*,*,#5498,.T.);\r
+-#5501=ORIENTED_EDGE('',*,*,#5500,.F.);\r
+-#5503=ORIENTED_EDGE('',*,*,#5502,.T.);\r
+-#5505=ORIENTED_EDGE('',*,*,#5504,.F.);\r
+-#5507=ORIENTED_EDGE('',*,*,#5506,.T.);\r
+-#5509=ORIENTED_EDGE('',*,*,#5508,.F.);\r
+-#5511=ORIENTED_EDGE('',*,*,#5510,.T.);\r
+-#5513=ORIENTED_EDGE('',*,*,#5512,.T.);\r
+-#5515=ORIENTED_EDGE('',*,*,#5514,.F.);\r
+-#5517=ORIENTED_EDGE('',*,*,#5516,.T.);\r
+-#5519=ORIENTED_EDGE('',*,*,#5518,.F.);\r
+-#5521=ORIENTED_EDGE('',*,*,#5520,.T.);\r
+-#5523=ORIENTED_EDGE('',*,*,#5522,.F.);\r
+-#5525=ORIENTED_EDGE('',*,*,#5524,.T.);\r
+-#5527=ORIENTED_EDGE('',*,*,#5526,.F.);\r
+-#5529=ORIENTED_EDGE('',*,*,#5528,.T.);\r
+-#5531=ORIENTED_EDGE('',*,*,#5530,.F.);\r
+-#5533=ORIENTED_EDGE('',*,*,#5532,.F.);\r
+-#5535=ORIENTED_EDGE('',*,*,#5534,.T.);\r
+-#5537=ORIENTED_EDGE('',*,*,#5536,.F.);\r
+-#5538=EDGE_LOOP('',(#5495,#5497,#5499,#5501,#5503,#5505,#5507,#5509,#5511,#5513,\r
+-#5515,#5517,#5519,#5521,#5523,#5525,#5527,#5529,#5531,#5533,#5535,#5537));\r
+-#5539=FACE_OUTER_BOUND('',#5538,.F.);\r
+-#5541=ORIENTED_EDGE('',*,*,#5540,.T.);\r
+-#5543=ORIENTED_EDGE('',*,*,#5542,.F.);\r
+-#5545=ORIENTED_EDGE('',*,*,#5544,.F.);\r
+-#5547=ORIENTED_EDGE('',*,*,#5546,.F.);\r
+-#5549=ORIENTED_EDGE('',*,*,#5548,.F.);\r
+-#5551=ORIENTED_EDGE('',*,*,#5550,.F.);\r
+-#5552=EDGE_LOOP('',(#5541,#5543,#5545,#5547,#5549,#5551));\r
+-#5553=FACE_BOUND('',#5552,.F.);\r
+-#5555=ORIENTED_EDGE('',*,*,#5554,.T.);\r
+-#5557=ORIENTED_EDGE('',*,*,#5556,.T.);\r
+-#5558=EDGE_LOOP('',(#5555,#5557));\r
+-#5559=FACE_BOUND('',#5558,.F.);\r
+-#5561=ORIENTED_EDGE('',*,*,#5560,.T.);\r
+-#5563=ORIENTED_EDGE('',*,*,#5562,.T.);\r
+-#5564=EDGE_LOOP('',(#5561,#5563));\r
+-#5565=FACE_BOUND('',#5564,.F.);\r
+-#5567=ORIENTED_EDGE('',*,*,#5566,.T.);\r
+-#5569=ORIENTED_EDGE('',*,*,#5568,.T.);\r
+-#5570=EDGE_LOOP('',(#5567,#5569));\r
+-#5571=FACE_BOUND('',#5570,.F.);\r
+-#5573=ORIENTED_EDGE('',*,*,#5572,.T.);\r
+-#5575=ORIENTED_EDGE('',*,*,#5574,.T.);\r
+-#5576=EDGE_LOOP('',(#5573,#5575));\r
+-#5577=FACE_BOUND('',#5576,.F.);\r
+-#5579=ORIENTED_EDGE('',*,*,#5578,.T.);\r
+-#5581=ORIENTED_EDGE('',*,*,#5580,.T.);\r
+-#5582=EDGE_LOOP('',(#5579,#5581));\r
+-#5583=FACE_BOUND('',#5582,.F.);\r
+-#5585=ORIENTED_EDGE('',*,*,#5584,.T.);\r
+-#5587=ORIENTED_EDGE('',*,*,#5586,.T.);\r
+-#5588=EDGE_LOOP('',(#5585,#5587));\r
+-#5589=FACE_BOUND('',#5588,.F.);\r
+-#5591=ORIENTED_EDGE('',*,*,#5590,.T.);\r
+-#5593=ORIENTED_EDGE('',*,*,#5592,.T.);\r
+-#5594=EDGE_LOOP('',(#5591,#5593));\r
+-#5595=FACE_BOUND('',#5594,.F.);\r
+-#5597=ORIENTED_EDGE('',*,*,#5596,.T.);\r
+-#5599=ORIENTED_EDGE('',*,*,#5598,.T.);\r
+-#5600=EDGE_LOOP('',(#5597,#5599));\r
+-#5601=FACE_BOUND('',#5600,.F.);\r
+-#5603=ORIENTED_EDGE('',*,*,#5602,.T.);\r
+-#5605=ORIENTED_EDGE('',*,*,#5604,.T.);\r
+-#5606=EDGE_LOOP('',(#5603,#5605));\r
+-#5607=FACE_BOUND('',#5606,.F.);\r
+-#5609=ORIENTED_EDGE('',*,*,#5608,.T.);\r
+-#5611=ORIENTED_EDGE('',*,*,#5610,.T.);\r
+-#5612=EDGE_LOOP('',(#5609,#5611));\r
+-#5613=FACE_BOUND('',#5612,.F.);\r
+-#5615=ORIENTED_EDGE('',*,*,#5614,.T.);\r
+-#5617=ORIENTED_EDGE('',*,*,#5616,.T.);\r
+-#5618=EDGE_LOOP('',(#5615,#5617));\r
+-#5619=FACE_BOUND('',#5618,.F.);\r
+-#5621=ORIENTED_EDGE('',*,*,#5620,.T.);\r
+-#5623=ORIENTED_EDGE('',*,*,#5622,.T.);\r
+-#5624=EDGE_LOOP('',(#5621,#5623));\r
+-#5625=FACE_BOUND('',#5624,.F.);\r
+-#5627=ORIENTED_EDGE('',*,*,#5626,.T.);\r
+-#5629=ORIENTED_EDGE('',*,*,#5628,.T.);\r
+-#5630=EDGE_LOOP('',(#5627,#5629));\r
+-#5631=FACE_BOUND('',#5630,.F.);\r
+-#5633=ORIENTED_EDGE('',*,*,#5632,.T.);\r
+-#5635=ORIENTED_EDGE('',*,*,#5634,.T.);\r
+-#5636=EDGE_LOOP('',(#5633,#5635));\r
+-#5637=FACE_BOUND('',#5636,.F.);\r
+-#5639=ORIENTED_EDGE('',*,*,#5638,.T.);\r
+-#5641=ORIENTED_EDGE('',*,*,#5640,.F.);\r
+-#5643=ORIENTED_EDGE('',*,*,#5642,.F.);\r
+-#5645=ORIENTED_EDGE('',*,*,#5644,.F.);\r
+-#5647=ORIENTED_EDGE('',*,*,#5646,.F.);\r
+-#5649=ORIENTED_EDGE('',*,*,#5648,.F.);\r
+-#5651=ORIENTED_EDGE('',*,*,#5650,.F.);\r
+-#5653=ORIENTED_EDGE('',*,*,#5652,.F.);\r
+-#5654=EDGE_LOOP('',(#5639,#5641,#5643,#5645,#5647,#5649,#5651,#5653));\r
+-#5655=FACE_BOUND('',#5654,.F.);\r
+-#5657=ORIENTED_EDGE('',*,*,#5656,.F.);\r
+-#5659=ORIENTED_EDGE('',*,*,#5658,.F.);\r
+-#5661=ORIENTED_EDGE('',*,*,#5660,.T.);\r
+-#5663=ORIENTED_EDGE('',*,*,#5662,.F.);\r
+-#5665=ORIENTED_EDGE('',*,*,#5664,.F.);\r
+-#5667=ORIENTED_EDGE('',*,*,#5666,.F.);\r
+-#5669=ORIENTED_EDGE('',*,*,#5668,.T.);\r
+-#5671=ORIENTED_EDGE('',*,*,#5670,.F.);\r
+-#5673=ORIENTED_EDGE('',*,*,#5672,.T.);\r
+-#5675=ORIENTED_EDGE('',*,*,#5674,.F.);\r
+-#5677=ORIENTED_EDGE('',*,*,#5676,.T.);\r
+-#5679=ORIENTED_EDGE('',*,*,#5678,.F.);\r
+-#5681=ORIENTED_EDGE('',*,*,#5680,.F.);\r
+-#5683=ORIENTED_EDGE('',*,*,#5682,.T.);\r
+-#5685=ORIENTED_EDGE('',*,*,#5684,.F.);\r
+-#5687=ORIENTED_EDGE('',*,*,#5686,.F.);\r
+-#5688=EDGE_LOOP('',(#5657,#5659,#5661,#5663,#5665,#5667,#5669,#5671,#5673,#5675,\r
+-#5677,#5679,#5681,#5683,#5685,#5687));\r
+-#5689=FACE_BOUND('',#5688,.F.);\r
+-#5691=ORIENTED_EDGE('',*,*,#5690,.T.);\r
+-#5693=ORIENTED_EDGE('',*,*,#5692,.T.);\r
+-#5694=EDGE_LOOP('',(#5691,#5693));\r
+-#5695=FACE_BOUND('',#5694,.F.);\r
+-#5697=ORIENTED_EDGE('',*,*,#5696,.T.);\r
+-#5699=ORIENTED_EDGE('',*,*,#5698,.T.);\r
+-#5700=EDGE_LOOP('',(#5697,#5699));\r
+-#5701=FACE_BOUND('',#5700,.F.);\r
+-#5703=ORIENTED_EDGE('',*,*,#5702,.T.);\r
+-#5705=ORIENTED_EDGE('',*,*,#5704,.T.);\r
+-#5706=EDGE_LOOP('',(#5703,#5705));\r
+-#5707=FACE_BOUND('',#5706,.F.);\r
+-#5709=ORIENTED_EDGE('',*,*,#5708,.T.);\r
+-#5711=ORIENTED_EDGE('',*,*,#5710,.T.);\r
+-#5712=EDGE_LOOP('',(#5709,#5711));\r
+-#5713=FACE_BOUND('',#5712,.F.);\r
+-#5715=ORIENTED_EDGE('',*,*,#5714,.T.);\r
+-#5717=ORIENTED_EDGE('',*,*,#5716,.T.);\r
+-#5718=EDGE_LOOP('',(#5715,#5717));\r
+-#5719=FACE_BOUND('',#5718,.F.);\r
+-#5721=ORIENTED_EDGE('',*,*,#5720,.T.);\r
+-#5723=ORIENTED_EDGE('',*,*,#5722,.T.);\r
+-#5724=EDGE_LOOP('',(#5721,#5723));\r
+-#5725=FACE_BOUND('',#5724,.F.);\r
+-#5727=ORIENTED_EDGE('',*,*,#5726,.T.);\r
+-#5729=ORIENTED_EDGE('',*,*,#5728,.T.);\r
+-#5731=ORIENTED_EDGE('',*,*,#5730,.T.);\r
+-#5733=ORIENTED_EDGE('',*,*,#5732,.T.);\r
+-#5734=EDGE_LOOP('',(#5727,#5729,#5731,#5733));\r
+-#5735=FACE_BOUND('',#5734,.F.);\r
+-#5737=ORIENTED_EDGE('',*,*,#5736,.T.);\r
+-#5739=ORIENTED_EDGE('',*,*,#5738,.F.);\r
+-#5741=ORIENTED_EDGE('',*,*,#5740,.T.);\r
+-#5743=ORIENTED_EDGE('',*,*,#5742,.T.);\r
+-#5745=ORIENTED_EDGE('',*,*,#5744,.F.);\r
+-#5746=EDGE_LOOP('',(#5737,#5739,#5741,#5743,#5745));\r
+-#5747=FACE_BOUND('',#5746,.F.);\r
+-#5749=ORIENTED_EDGE('',*,*,#5748,.F.);\r
+-#5751=ORIENTED_EDGE('',*,*,#5750,.T.);\r
+-#5753=ORIENTED_EDGE('',*,*,#5752,.T.);\r
+-#5755=ORIENTED_EDGE('',*,*,#5754,.T.);\r
+-#5757=ORIENTED_EDGE('',*,*,#5756,.F.);\r
+-#5759=ORIENTED_EDGE('',*,*,#5758,.T.);\r
+-#5761=ORIENTED_EDGE('',*,*,#5760,.F.);\r
+-#5763=ORIENTED_EDGE('',*,*,#5762,.T.);\r
+-#5765=ORIENTED_EDGE('',*,*,#5764,.F.);\r
+-#5767=ORIENTED_EDGE('',*,*,#5766,.T.);\r
+-#5769=ORIENTED_EDGE('',*,*,#5768,.F.);\r
+-#5771=ORIENTED_EDGE('',*,*,#5770,.T.);\r
+-#5773=ORIENTED_EDGE('',*,*,#5772,.F.);\r
+-#5775=ORIENTED_EDGE('',*,*,#5774,.T.);\r
+-#5776=EDGE_LOOP('',(#5749,#5751,#5753,#5755,#5757,#5759,#5761,#5763,#5765,#5767,\r
+-#5769,#5771,#5773,#5775));\r
+-#5777=FACE_BOUND('',#5776,.F.);\r
+-#5779=ORIENTED_EDGE('',*,*,#5778,.T.);\r
+-#5781=ORIENTED_EDGE('',*,*,#5780,.T.);\r
+-#5783=ORIENTED_EDGE('',*,*,#5782,.T.);\r
+-#5785=ORIENTED_EDGE('',*,*,#5784,.T.);\r
+-#5786=EDGE_LOOP('',(#5779,#5781,#5783,#5785));\r
+-#5787=FACE_BOUND('',#5786,.F.);\r
+-#5789=ORIENTED_EDGE('',*,*,#5788,.T.);\r
+-#5791=ORIENTED_EDGE('',*,*,#5790,.T.);\r
+-#5793=ORIENTED_EDGE('',*,*,#5792,.T.);\r
+-#5795=ORIENTED_EDGE('',*,*,#5794,.T.);\r
+-#5796=EDGE_LOOP('',(#5789,#5791,#5793,#5795));\r
+-#5797=FACE_BOUND('',#5796,.F.);\r
+-#5799=ORIENTED_EDGE('',*,*,#5798,.T.);\r
+-#5801=ORIENTED_EDGE('',*,*,#5800,.T.);\r
+-#5803=ORIENTED_EDGE('',*,*,#5802,.T.);\r
+-#5805=ORIENTED_EDGE('',*,*,#5804,.T.);\r
+-#5806=EDGE_LOOP('',(#5799,#5801,#5803,#5805));\r
+-#5807=FACE_BOUND('',#5806,.F.);\r
+-#5809=ORIENTED_EDGE('',*,*,#5808,.T.);\r
+-#5811=ORIENTED_EDGE('',*,*,#5810,.T.);\r
+-#5813=ORIENTED_EDGE('',*,*,#5812,.T.);\r
+-#5815=ORIENTED_EDGE('',*,*,#5814,.T.);\r
+-#5816=EDGE_LOOP('',(#5809,#5811,#5813,#5815));\r
+-#5817=FACE_BOUND('',#5816,.F.);\r
+-#5819=ORIENTED_EDGE('',*,*,#5818,.F.);\r
+-#5821=ORIENTED_EDGE('',*,*,#5820,.F.);\r
+-#5823=ORIENTED_EDGE('',*,*,#5822,.F.);\r
+-#5825=ORIENTED_EDGE('',*,*,#5824,.F.);\r
+-#5826=EDGE_LOOP('',(#5819,#5821,#5823,#5825));\r
+-#5827=FACE_BOUND('',#5826,.F.);\r
+-#5829=ORIENTED_EDGE('',*,*,#5828,.F.);\r
+-#5831=ORIENTED_EDGE('',*,*,#5830,.F.);\r
+-#5833=ORIENTED_EDGE('',*,*,#5832,.F.);\r
+-#5835=ORIENTED_EDGE('',*,*,#5834,.F.);\r
+-#5836=EDGE_LOOP('',(#5829,#5831,#5833,#5835));\r
+-#5837=FACE_BOUND('',#5836,.F.);\r
+-#5839=ORIENTED_EDGE('',*,*,#5838,.F.);\r
+-#5841=ORIENTED_EDGE('',*,*,#5840,.F.);\r
+-#5843=ORIENTED_EDGE('',*,*,#5842,.F.);\r
+-#5845=ORIENTED_EDGE('',*,*,#5844,.F.);\r
+-#5846=EDGE_LOOP('',(#5839,#5841,#5843,#5845));\r
+-#5847=FACE_BOUND('',#5846,.F.);\r
+-#5849=ORIENTED_EDGE('',*,*,#5848,.F.);\r
+-#5851=ORIENTED_EDGE('',*,*,#5850,.F.);\r
+-#5853=ORIENTED_EDGE('',*,*,#5852,.F.);\r
+-#5855=ORIENTED_EDGE('',*,*,#5854,.F.);\r
+-#5856=EDGE_LOOP('',(#5849,#5851,#5853,#5855));\r
+-#5857=FACE_BOUND('',#5856,.F.);\r
+-#5859=ORIENTED_EDGE('',*,*,#5858,.F.);\r
+-#5861=ORIENTED_EDGE('',*,*,#5860,.F.);\r
+-#5863=ORIENTED_EDGE('',*,*,#5862,.F.);\r
+-#5865=ORIENTED_EDGE('',*,*,#5864,.F.);\r
+-#5866=EDGE_LOOP('',(#5859,#5861,#5863,#5865));\r
+-#5867=FACE_BOUND('',#5866,.F.);\r
+-#5869=ORIENTED_EDGE('',*,*,#5868,.F.);\r
+-#5871=ORIENTED_EDGE('',*,*,#5870,.F.);\r
+-#5873=ORIENTED_EDGE('',*,*,#5872,.F.);\r
+-#5875=ORIENTED_EDGE('',*,*,#5874,.F.);\r
+-#5876=EDGE_LOOP('',(#5869,#5871,#5873,#5875));\r
+-#5877=FACE_BOUND('',#5876,.F.);\r
+-#5879=ORIENTED_EDGE('',*,*,#5878,.T.);\r
+-#5881=ORIENTED_EDGE('',*,*,#5880,.T.);\r
+-#5883=ORIENTED_EDGE('',*,*,#5882,.T.);\r
+-#5885=ORIENTED_EDGE('',*,*,#5884,.T.);\r
+-#5886=EDGE_LOOP('',(#5879,#5881,#5883,#5885));\r
+-#5887=FACE_BOUND('',#5886,.F.);\r
+-#5889=ORIENTED_EDGE('',*,*,#5888,.F.);\r
+-#5891=ORIENTED_EDGE('',*,*,#5890,.F.);\r
+-#5893=ORIENTED_EDGE('',*,*,#5892,.F.);\r
+-#5895=ORIENTED_EDGE('',*,*,#5894,.F.);\r
+-#5897=ORIENTED_EDGE('',*,*,#5896,.F.);\r
+-#5899=ORIENTED_EDGE('',*,*,#5898,.F.);\r
+-#5901=ORIENTED_EDGE('',*,*,#5900,.F.);\r
+-#5903=ORIENTED_EDGE('',*,*,#5902,.F.);\r
+-#5905=ORIENTED_EDGE('',*,*,#5904,.F.);\r
+-#5907=ORIENTED_EDGE('',*,*,#5906,.F.);\r
+-#5909=ORIENTED_EDGE('',*,*,#5908,.F.);\r
+-#5911=ORIENTED_EDGE('',*,*,#5910,.F.);\r
+-#5913=ORIENTED_EDGE('',*,*,#5912,.F.);\r
+-#5915=ORIENTED_EDGE('',*,*,#5914,.F.);\r
+-#5916=EDGE_LOOP('',(#5889,#5891,#5893,#5895,#5897,#5899,#5901,#5903,#5905,#5907,\r
+-#5909,#5911,#5913,#5915));\r
+-#5917=FACE_BOUND('',#5916,.F.);\r
+-#5919=ORIENTED_EDGE('',*,*,#5918,.F.);\r
+-#5921=ORIENTED_EDGE('',*,*,#5920,.F.);\r
+-#5923=ORIENTED_EDGE('',*,*,#5922,.F.);\r
+-#5925=ORIENTED_EDGE('',*,*,#5924,.T.);\r
+-#5927=ORIENTED_EDGE('',*,*,#5926,.F.);\r
+-#5928=EDGE_LOOP('',(#5919,#5921,#5923,#5925,#5927));\r
+-#5929=FACE_BOUND('',#5928,.F.);\r
+-#5931=ORIENTED_EDGE('',*,*,#5930,.F.);\r
+-#5933=ORIENTED_EDGE('',*,*,#5932,.F.);\r
+-#5935=ORIENTED_EDGE('',*,*,#5934,.F.);\r
+-#5937=ORIENTED_EDGE('',*,*,#5936,.T.);\r
+-#5939=ORIENTED_EDGE('',*,*,#5938,.F.);\r
+-#5940=EDGE_LOOP('',(#5931,#5933,#5935,#5937,#5939));\r
+-#5941=FACE_BOUND('',#5940,.F.);\r
+-#5943=ORIENTED_EDGE('',*,*,#5942,.T.);\r
+-#5945=ORIENTED_EDGE('',*,*,#5944,.F.);\r
+-#5947=ORIENTED_EDGE('',*,*,#5946,.T.);\r
+-#5949=ORIENTED_EDGE('',*,*,#5948,.T.);\r
+-#5951=ORIENTED_EDGE('',*,*,#5950,.F.);\r
+-#5952=EDGE_LOOP('',(#5943,#5945,#5947,#5949,#5951));\r
+-#5953=FACE_BOUND('',#5952,.F.);\r
+-#5954=ADVANCED_FACE('',(#5539,#5553,#5559,#5565,#5571,#5577,#5583,#5589,#5595,\r
+-#5601,#5607,#5613,#5619,#5625,#5631,#5637,#5655,#5689,#5695,#5701,#5707,#5713,\r
+-#5719,#5725,#5735,#5747,#5777,#5787,#5797,#5807,#5817,#5827,#5837,#5847,#5857,\r
+-#5867,#5877,#5887,#5917,#5929,#5941,#5953),#5493,.F.);\r
+-#5955=CARTESIAN_POINT('',(0.E0,0.E0,8.E0));\r
+-#5956=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#5957=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#5958=AXIS2_PLACEMENT_3D('',#5955,#5956,#5957);\r
+-#5959=PLANE('',#5958);\r
+-#5960=ORIENTED_EDGE('',*,*,#5540,.F.);\r
+-#5962=ORIENTED_EDGE('',*,*,#5961,.T.);\r
+-#5964=ORIENTED_EDGE('',*,*,#5963,.F.);\r
+-#5966=ORIENTED_EDGE('',*,*,#5965,.F.);\r
+-#5967=ORIENTED_EDGE('',*,*,#5494,.T.);\r
+-#5969=ORIENTED_EDGE('',*,*,#5968,.F.);\r
+-#5971=ORIENTED_EDGE('',*,*,#5970,.F.);\r
+-#5973=ORIENTED_EDGE('',*,*,#5972,.T.);\r
+-#5975=ORIENTED_EDGE('',*,*,#5974,.F.);\r
+-#5977=ORIENTED_EDGE('',*,*,#5976,.F.);\r
+-#5979=ORIENTED_EDGE('',*,*,#5978,.F.);\r
+-#5981=ORIENTED_EDGE('',*,*,#5980,.T.);\r
+-#5983=ORIENTED_EDGE('',*,*,#5982,.T.);\r
+-#5985=ORIENTED_EDGE('',*,*,#5984,.F.);\r
+-#5986=ORIENTED_EDGE('',*,*,#5510,.F.);\r
+-#5988=ORIENTED_EDGE('',*,*,#5987,.F.);\r
+-#5990=ORIENTED_EDGE('',*,*,#5989,.F.);\r
+-#5992=ORIENTED_EDGE('',*,*,#5991,.T.);\r
+-#5993=EDGE_LOOP('',(#5960,#5962,#5964,#5966,#5967,#5969,#5971,#5973,#5975,#5977,\r
+-#5979,#5981,#5983,#5985,#5986,#5988,#5990,#5992));\r
+-#5994=FACE_OUTER_BOUND('',#5993,.F.);\r
+-#5996=ORIENTED_EDGE('',*,*,#5995,.T.);\r
+-#5998=ORIENTED_EDGE('',*,*,#5997,.T.);\r
+-#5999=EDGE_LOOP('',(#5996,#5998));\r
+-#6000=FACE_BOUND('',#5999,.F.);\r
+-#6002=ORIENTED_EDGE('',*,*,#6001,.T.);\r
+-#6004=ORIENTED_EDGE('',*,*,#6003,.T.);\r
+-#6005=EDGE_LOOP('',(#6002,#6004));\r
+-#6006=FACE_BOUND('',#6005,.F.);\r
+-#6008=ORIENTED_EDGE('',*,*,#6007,.T.);\r
+-#6010=ORIENTED_EDGE('',*,*,#6009,.T.);\r
+-#6011=EDGE_LOOP('',(#6008,#6010));\r
+-#6012=FACE_BOUND('',#6011,.F.);\r
+-#6014=ORIENTED_EDGE('',*,*,#6013,.T.);\r
+-#6016=ORIENTED_EDGE('',*,*,#6015,.T.);\r
+-#6017=EDGE_LOOP('',(#6014,#6016));\r
+-#6018=FACE_BOUND('',#6017,.F.);\r
+-#6020=ORIENTED_EDGE('',*,*,#6019,.F.);\r
+-#6022=ORIENTED_EDGE('',*,*,#6021,.F.);\r
+-#6023=EDGE_LOOP('',(#6020,#6022));\r
+-#6024=FACE_BOUND('',#6023,.F.);\r
+-#6026=ORIENTED_EDGE('',*,*,#6025,.F.);\r
+-#6028=ORIENTED_EDGE('',*,*,#6027,.F.);\r
+-#6029=EDGE_LOOP('',(#6026,#6028));\r
+-#6030=FACE_BOUND('',#6029,.F.);\r
+-#6032=ORIENTED_EDGE('',*,*,#6031,.F.);\r
+-#6034=ORIENTED_EDGE('',*,*,#6033,.F.);\r
+-#6035=EDGE_LOOP('',(#6032,#6034));\r
+-#6036=FACE_BOUND('',#6035,.F.);\r
+-#6038=ORIENTED_EDGE('',*,*,#6037,.F.);\r
+-#6040=ORIENTED_EDGE('',*,*,#6039,.F.);\r
+-#6041=EDGE_LOOP('',(#6038,#6040));\r
+-#6042=FACE_BOUND('',#6041,.F.);\r
+-#6044=ORIENTED_EDGE('',*,*,#6043,.T.);\r
+-#6046=ORIENTED_EDGE('',*,*,#6045,.F.);\r
+-#6048=ORIENTED_EDGE('',*,*,#6047,.T.);\r
+-#6050=ORIENTED_EDGE('',*,*,#6049,.F.);\r
+-#6052=ORIENTED_EDGE('',*,*,#6051,.T.);\r
+-#6054=ORIENTED_EDGE('',*,*,#6053,.F.);\r
+-#6056=ORIENTED_EDGE('',*,*,#6055,.T.);\r
+-#6058=ORIENTED_EDGE('',*,*,#6057,.F.);\r
+-#6059=EDGE_LOOP('',(#6044,#6046,#6048,#6050,#6052,#6054,#6056,#6058));\r
+-#6060=FACE_BOUND('',#6059,.F.);\r
+-#6062=ORIENTED_EDGE('',*,*,#6061,.F.);\r
+-#6064=ORIENTED_EDGE('',*,*,#6063,.F.);\r
+-#6066=ORIENTED_EDGE('',*,*,#6065,.F.);\r
+-#6068=ORIENTED_EDGE('',*,*,#6067,.F.);\r
+-#6070=ORIENTED_EDGE('',*,*,#6069,.F.);\r
+-#6072=ORIENTED_EDGE('',*,*,#6071,.F.);\r
+-#6074=ORIENTED_EDGE('',*,*,#6073,.F.);\r
+-#6076=ORIENTED_EDGE('',*,*,#6075,.F.);\r
+-#6077=EDGE_LOOP('',(#6062,#6064,#6066,#6068,#6070,#6072,#6074,#6076));\r
+-#6078=FACE_BOUND('',#6077,.F.);\r
+-#6079=ADVANCED_FACE('',(#5994,#6000,#6006,#6012,#6018,#6024,#6030,#6036,#6042,\r
+-#6060,#6078),#5959,.F.);\r
+-#6080=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));\r
+-#6081=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6082=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6083=AXIS2_PLACEMENT_3D('',#6080,#6081,#6082);\r
+-#6084=CYLINDRICAL_SURFACE('',#6083,9.5E-2);\r
+-#6085=ORIENTED_EDGE('',*,*,#5995,.F.);\r
+-#6087=ORIENTED_EDGE('',*,*,#6086,.T.);\r
+-#6089=ORIENTED_EDGE('',*,*,#6088,.T.);\r
+-#6091=ORIENTED_EDGE('',*,*,#6090,.F.);\r
+-#6092=EDGE_LOOP('',(#6085,#6087,#6089,#6091));\r
+-#6093=FACE_OUTER_BOUND('',#6092,.F.);\r
+-#6094=ADVANCED_FACE('',(#6093),#6084,.F.);\r
+-#6095=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));\r
+-#6096=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6097=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6098=AXIS2_PLACEMENT_3D('',#6095,#6096,#6097);\r
+-#6099=CYLINDRICAL_SURFACE('',#6098,9.5E-2);\r
+-#6100=ORIENTED_EDGE('',*,*,#5997,.F.);\r
+-#6101=ORIENTED_EDGE('',*,*,#6090,.T.);\r
+-#6103=ORIENTED_EDGE('',*,*,#6102,.T.);\r
+-#6104=ORIENTED_EDGE('',*,*,#6086,.F.);\r
+-#6105=EDGE_LOOP('',(#6100,#6101,#6103,#6104));\r
+-#6106=FACE_OUTER_BOUND('',#6105,.F.);\r
+-#6107=ADVANCED_FACE('',(#6106),#6099,.F.);\r
+-#6108=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));\r
+-#6109=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6110=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6111=AXIS2_PLACEMENT_3D('',#6108,#6109,#6110);\r
+-#6112=PLANE('',#6111);\r
+-#6113=ORIENTED_EDGE('',*,*,#6088,.F.);\r
+-#6114=ORIENTED_EDGE('',*,*,#6102,.F.);\r
+-#6115=EDGE_LOOP('',(#6113,#6114));\r
+-#6116=FACE_OUTER_BOUND('',#6115,.F.);\r
+-#6117=ADVANCED_FACE('',(#6116),#6112,.T.);\r
+-#6118=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));\r
+-#6119=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6120=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6121=AXIS2_PLACEMENT_3D('',#6118,#6119,#6120);\r
+-#6122=CYLINDRICAL_SURFACE('',#6121,1.625E-1);\r
+-#6123=ORIENTED_EDGE('',*,*,#6001,.F.);\r
+-#6125=ORIENTED_EDGE('',*,*,#6124,.T.);\r
+-#6127=ORIENTED_EDGE('',*,*,#6126,.T.);\r
+-#6129=ORIENTED_EDGE('',*,*,#6128,.F.);\r
+-#6130=EDGE_LOOP('',(#6123,#6125,#6127,#6129));\r
+-#6131=FACE_OUTER_BOUND('',#6130,.F.);\r
+-#6132=ADVANCED_FACE('',(#6131),#6122,.F.);\r
+-#6133=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));\r
+-#6134=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6135=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6136=AXIS2_PLACEMENT_3D('',#6133,#6134,#6135);\r
+-#6137=CYLINDRICAL_SURFACE('',#6136,1.625E-1);\r
+-#6138=ORIENTED_EDGE('',*,*,#6003,.F.);\r
+-#6139=ORIENTED_EDGE('',*,*,#6128,.T.);\r
+-#6141=ORIENTED_EDGE('',*,*,#6140,.T.);\r
+-#6142=ORIENTED_EDGE('',*,*,#6124,.F.);\r
+-#6143=EDGE_LOOP('',(#6138,#6139,#6141,#6142));\r
+-#6144=FACE_OUTER_BOUND('',#6143,.F.);\r
+-#6145=ADVANCED_FACE('',(#6144),#6137,.F.);\r
+-#6146=CARTESIAN_POINT('',(2.4E1,0.E0,1.E1));\r
+-#6147=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6148=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6149=AXIS2_PLACEMENT_3D('',#6146,#6147,#6148);\r
+-#6150=PLANE('',#6149);\r
+-#6152=ORIENTED_EDGE('',*,*,#6151,.T.);\r
+-#6154=ORIENTED_EDGE('',*,*,#6153,.T.);\r
+-#6156=ORIENTED_EDGE('',*,*,#6155,.F.);\r
+-#6158=ORIENTED_EDGE('',*,*,#6157,.F.);\r
+-#6160=ORIENTED_EDGE('',*,*,#6159,.T.);\r
+-#6162=ORIENTED_EDGE('',*,*,#6161,.T.);\r
+-#6164=ORIENTED_EDGE('',*,*,#6163,.T.);\r
+-#6166=ORIENTED_EDGE('',*,*,#6165,.T.);\r
+-#6168=ORIENTED_EDGE('',*,*,#6167,.F.);\r
+-#6169=EDGE_LOOP('',(#6152,#6154,#6156,#6158,#6160,#6162,#6164,#6166,#6168));\r
+-#6170=FACE_OUTER_BOUND('',#6169,.F.);\r
+-#6171=ORIENTED_EDGE('',*,*,#6126,.F.);\r
+-#6172=ORIENTED_EDGE('',*,*,#6140,.F.);\r
+-#6173=EDGE_LOOP('',(#6171,#6172));\r
+-#6174=FACE_BOUND('',#6173,.F.);\r
+-#6176=ORIENTED_EDGE('',*,*,#6175,.F.);\r
+-#6178=ORIENTED_EDGE('',*,*,#6177,.F.);\r
+-#6180=ORIENTED_EDGE('',*,*,#6179,.F.);\r
+-#6182=ORIENTED_EDGE('',*,*,#6181,.F.);\r
+-#6184=ORIENTED_EDGE('',*,*,#6183,.F.);\r
+-#6186=ORIENTED_EDGE('',*,*,#6185,.F.);\r
+-#6188=ORIENTED_EDGE('',*,*,#6187,.F.);\r
+-#6190=ORIENTED_EDGE('',*,*,#6189,.F.);\r
+-#6192=ORIENTED_EDGE('',*,*,#6191,.F.);\r
+-#6194=ORIENTED_EDGE('',*,*,#6193,.F.);\r
+-#6196=ORIENTED_EDGE('',*,*,#6195,.F.);\r
+-#6198=ORIENTED_EDGE('',*,*,#6197,.F.);\r
+-#6199=EDGE_LOOP('',(#6176,#6178,#6180,#6182,#6184,#6186,#6188,#6190,#6192,#6194,\r
+-#6196,#6198));\r
+-#6200=FACE_BOUND('',#6199,.F.);\r
+-#6201=ADVANCED_FACE('',(#6170,#6174,#6200),#6150,.F.);\r
+-#6202=CARTESIAN_POINT('',(2.375E1,1.5E0,1.2E1));\r
+-#6203=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6204=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6205=AXIS2_PLACEMENT_3D('',#6202,#6203,#6204);\r
+-#6206=PLANE('',#6205);\r
+-#6208=ORIENTED_EDGE('',*,*,#6207,.F.);\r
+-#6210=ORIENTED_EDGE('',*,*,#6209,.F.);\r
+-#6211=ORIENTED_EDGE('',*,*,#6151,.F.);\r
+-#6212=EDGE_LOOP('',(#6208,#6210,#6211));\r
+-#6213=FACE_OUTER_BOUND('',#6212,.F.);\r
+-#6214=ADVANCED_FACE('',(#6213),#6206,.T.);\r
+-#6215=CARTESIAN_POINT('',(0.E0,1.5E0,0.E0));\r
+-#6216=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6217=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6218=AXIS2_PLACEMENT_3D('',#6215,#6216,#6217);\r
+-#6219=PLANE('',#6218);\r
+-#6220=ORIENTED_EDGE('',*,*,#5963,.T.);\r
+-#6222=ORIENTED_EDGE('',*,*,#6221,.F.);\r
+-#6224=ORIENTED_EDGE('',*,*,#6223,.F.);\r
+-#6226=ORIENTED_EDGE('',*,*,#6225,.T.);\r
+-#6228=ORIENTED_EDGE('',*,*,#6227,.F.);\r
+-#6230=ORIENTED_EDGE('',*,*,#6229,.F.);\r
+-#6231=ORIENTED_EDGE('',*,*,#5989,.T.);\r
+-#6233=ORIENTED_EDGE('',*,*,#6232,.F.);\r
+-#6235=ORIENTED_EDGE('',*,*,#6234,.F.);\r
+-#6237=ORIENTED_EDGE('',*,*,#6236,.T.);\r
+-#6239=ORIENTED_EDGE('',*,*,#6238,.F.);\r
+-#6241=ORIENTED_EDGE('',*,*,#6240,.T.);\r
+-#6243=ORIENTED_EDGE('',*,*,#6242,.F.);\r
+-#6245=ORIENTED_EDGE('',*,*,#6244,.F.);\r
+-#6246=EDGE_LOOP('',(#6220,#6222,#6224,#6226,#6228,#6230,#6231,#6233,#6235,#6237,\r
+-#6239,#6241,#6243,#6245));\r
+-#6247=FACE_OUTER_BOUND('',#6246,.F.);\r
+-#6249=ORIENTED_EDGE('',*,*,#6248,.F.);\r
+-#6251=ORIENTED_EDGE('',*,*,#6250,.F.);\r
+-#6252=EDGE_LOOP('',(#6249,#6251));\r
+-#6253=FACE_BOUND('',#6252,.F.);\r
+-#6255=ORIENTED_EDGE('',*,*,#6254,.F.);\r
+-#6257=ORIENTED_EDGE('',*,*,#6256,.F.);\r
+-#6258=EDGE_LOOP('',(#6255,#6257));\r
+-#6259=FACE_BOUND('',#6258,.F.);\r
+-#6261=ORIENTED_EDGE('',*,*,#6260,.F.);\r
+-#6263=ORIENTED_EDGE('',*,*,#6262,.F.);\r
+-#6264=EDGE_LOOP('',(#6261,#6263));\r
+-#6265=FACE_BOUND('',#6264,.F.);\r
+-#6267=ORIENTED_EDGE('',*,*,#6266,.F.);\r
+-#6269=ORIENTED_EDGE('',*,*,#6268,.F.);\r
+-#6270=EDGE_LOOP('',(#6267,#6269));\r
+-#6271=FACE_BOUND('',#6270,.F.);\r
+-#6273=ORIENTED_EDGE('',*,*,#6272,.F.);\r
+-#6275=ORIENTED_EDGE('',*,*,#6274,.F.);\r
+-#6276=EDGE_LOOP('',(#6273,#6275));\r
+-#6277=FACE_BOUND('',#6276,.F.);\r
+-#6278=ADVANCED_FACE('',(#6247,#6253,#6259,#6265,#6271,#6277),#6219,.T.);\r
+-#6279=CARTESIAN_POINT('',(0.E0,1.5E0,0.E0));\r
+-#6280=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6281=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6282=AXIS2_PLACEMENT_3D('',#6279,#6280,#6281);\r
+-#6283=PLANE('',#6282);\r
+-#6284=ORIENTED_EDGE('',*,*,#6207,.T.);\r
+-#6285=ORIENTED_EDGE('',*,*,#6167,.T.);\r
+-#6287=ORIENTED_EDGE('',*,*,#6286,.T.);\r
+-#6289=ORIENTED_EDGE('',*,*,#6288,.F.);\r
+-#6291=ORIENTED_EDGE('',*,*,#6290,.T.);\r
+-#6293=ORIENTED_EDGE('',*,*,#6292,.F.);\r
+-#6295=ORIENTED_EDGE('',*,*,#6294,.F.);\r
+-#6297=ORIENTED_EDGE('',*,*,#6296,.T.);\r
+-#6299=ORIENTED_EDGE('',*,*,#6298,.F.);\r
+-#6301=ORIENTED_EDGE('',*,*,#6300,.T.);\r
+-#6303=ORIENTED_EDGE('',*,*,#6302,.F.);\r
+-#6305=ORIENTED_EDGE('',*,*,#6304,.F.);\r
+-#6307=ORIENTED_EDGE('',*,*,#6306,.F.);\r
+-#6309=ORIENTED_EDGE('',*,*,#6308,.T.);\r
+-#6311=ORIENTED_EDGE('',*,*,#6310,.F.);\r
+-#6313=ORIENTED_EDGE('',*,*,#6312,.T.);\r
+-#6315=ORIENTED_EDGE('',*,*,#6314,.F.);\r
+-#6317=ORIENTED_EDGE('',*,*,#6316,.T.);\r
+-#6319=ORIENTED_EDGE('',*,*,#6318,.T.);\r
+-#6321=ORIENTED_EDGE('',*,*,#6320,.T.);\r
+-#6323=ORIENTED_EDGE('',*,*,#6322,.F.);\r
+-#6324=ORIENTED_EDGE('',*,*,#5976,.T.);\r
+-#6326=ORIENTED_EDGE('',*,*,#6325,.T.);\r
+-#6327=ORIENTED_EDGE('',*,*,#6157,.T.);\r
+-#6329=ORIENTED_EDGE('',*,*,#6328,.F.);\r
+-#6331=ORIENTED_EDGE('',*,*,#6330,.F.);\r
+-#6332=EDGE_LOOP('',(#6284,#6285,#6287,#6289,#6291,#6293,#6295,#6297,#6299,#6301,\r
+-#6303,#6305,#6307,#6309,#6311,#6313,#6315,#6317,#6319,#6321,#6323,#6324,#6326,\r
+-#6327,#6329,#6331));\r
+-#6333=FACE_OUTER_BOUND('',#6332,.F.);\r
+-#6335=ORIENTED_EDGE('',*,*,#6334,.F.);\r
+-#6337=ORIENTED_EDGE('',*,*,#6336,.F.);\r
+-#6338=EDGE_LOOP('',(#6335,#6337));\r
+-#6339=FACE_BOUND('',#6338,.F.);\r
+-#6341=ORIENTED_EDGE('',*,*,#6340,.F.);\r
+-#6343=ORIENTED_EDGE('',*,*,#6342,.F.);\r
+-#6344=EDGE_LOOP('',(#6341,#6343));\r
+-#6345=FACE_BOUND('',#6344,.F.);\r
+-#6347=ORIENTED_EDGE('',*,*,#6346,.T.);\r
+-#6349=ORIENTED_EDGE('',*,*,#6348,.T.);\r
+-#6350=EDGE_LOOP('',(#6347,#6349));\r
+-#6351=FACE_BOUND('',#6350,.F.);\r
+-#6353=ORIENTED_EDGE('',*,*,#6352,.T.);\r
+-#6355=ORIENTED_EDGE('',*,*,#6354,.T.);\r
+-#6356=EDGE_LOOP('',(#6353,#6355));\r
+-#6357=FACE_BOUND('',#6356,.F.);\r
+-#6359=ORIENTED_EDGE('',*,*,#6358,.F.);\r
+-#6361=ORIENTED_EDGE('',*,*,#6360,.F.);\r
+-#6362=EDGE_LOOP('',(#6359,#6361));\r
+-#6363=FACE_BOUND('',#6362,.F.);\r
+-#6365=ORIENTED_EDGE('',*,*,#6364,.F.);\r
+-#6367=ORIENTED_EDGE('',*,*,#6366,.F.);\r
+-#6368=EDGE_LOOP('',(#6365,#6367));\r
+-#6369=FACE_BOUND('',#6368,.F.);\r
+-#6371=ORIENTED_EDGE('',*,*,#6370,.F.);\r
+-#6373=ORIENTED_EDGE('',*,*,#6372,.F.);\r
+-#6374=EDGE_LOOP('',(#6371,#6373));\r
+-#6375=FACE_BOUND('',#6374,.F.);\r
+-#6377=ORIENTED_EDGE('',*,*,#6376,.F.);\r
+-#6379=ORIENTED_EDGE('',*,*,#6378,.F.);\r
+-#6380=EDGE_LOOP('',(#6377,#6379));\r
+-#6381=FACE_BOUND('',#6380,.F.);\r
+-#6383=ORIENTED_EDGE('',*,*,#6382,.F.);\r
+-#6385=ORIENTED_EDGE('',*,*,#6384,.F.);\r
+-#6386=EDGE_LOOP('',(#6383,#6385));\r
+-#6387=FACE_BOUND('',#6386,.F.);\r
+-#6389=ORIENTED_EDGE('',*,*,#6388,.F.);\r
+-#6391=ORIENTED_EDGE('',*,*,#6390,.F.);\r
+-#6392=EDGE_LOOP('',(#6389,#6391));\r
+-#6393=FACE_BOUND('',#6392,.F.);\r
+-#6395=ORIENTED_EDGE('',*,*,#6394,.F.);\r
+-#6397=ORIENTED_EDGE('',*,*,#6396,.F.);\r
+-#6398=EDGE_LOOP('',(#6395,#6397));\r
+-#6399=FACE_BOUND('',#6398,.F.);\r
+-#6401=ORIENTED_EDGE('',*,*,#6400,.T.);\r
+-#6403=ORIENTED_EDGE('',*,*,#6402,.F.);\r
+-#6405=ORIENTED_EDGE('',*,*,#6404,.F.);\r
+-#6407=ORIENTED_EDGE('',*,*,#6406,.F.);\r
+-#6409=ORIENTED_EDGE('',*,*,#6408,.T.);\r
+-#6411=ORIENTED_EDGE('',*,*,#6410,.F.);\r
+-#6413=ORIENTED_EDGE('',*,*,#6412,.T.);\r
+-#6415=ORIENTED_EDGE('',*,*,#6414,.F.);\r
+-#6416=EDGE_LOOP('',(#6401,#6403,#6405,#6407,#6409,#6411,#6413,#6415));\r
+-#6417=FACE_BOUND('',#6416,.F.);\r
+-#6419=ORIENTED_EDGE('',*,*,#6418,.F.);\r
+-#6421=ORIENTED_EDGE('',*,*,#6420,.F.);\r
+-#6423=ORIENTED_EDGE('',*,*,#6422,.T.);\r
+-#6425=ORIENTED_EDGE('',*,*,#6424,.F.);\r
+-#6427=ORIENTED_EDGE('',*,*,#6426,.T.);\r
+-#6429=ORIENTED_EDGE('',*,*,#6428,.F.);\r
+-#6431=ORIENTED_EDGE('',*,*,#6430,.T.);\r
+-#6433=ORIENTED_EDGE('',*,*,#6432,.F.);\r
+-#6435=ORIENTED_EDGE('',*,*,#6434,.F.);\r
+-#6437=ORIENTED_EDGE('',*,*,#6436,.F.);\r
+-#6439=ORIENTED_EDGE('',*,*,#6438,.F.);\r
+-#6441=ORIENTED_EDGE('',*,*,#6440,.T.);\r
+-#6443=ORIENTED_EDGE('',*,*,#6442,.F.);\r
+-#6445=ORIENTED_EDGE('',*,*,#6444,.F.);\r
+-#6447=ORIENTED_EDGE('',*,*,#6446,.T.);\r
+-#6449=ORIENTED_EDGE('',*,*,#6448,.F.);\r
+-#6450=EDGE_LOOP('',(#6419,#6421,#6423,#6425,#6427,#6429,#6431,#6433,#6435,#6437,\r
+-#6439,#6441,#6443,#6445,#6447,#6449));\r
+-#6451=FACE_BOUND('',#6450,.F.);\r
+-#6453=ORIENTED_EDGE('',*,*,#6452,.F.);\r
+-#6455=ORIENTED_EDGE('',*,*,#6454,.F.);\r
+-#6456=EDGE_LOOP('',(#6453,#6455));\r
+-#6457=FACE_BOUND('',#6456,.F.);\r
+-#6459=ORIENTED_EDGE('',*,*,#6458,.F.);\r
+-#6461=ORIENTED_EDGE('',*,*,#6460,.F.);\r
+-#6462=EDGE_LOOP('',(#6459,#6461));\r
+-#6463=FACE_BOUND('',#6462,.F.);\r
+-#6465=ORIENTED_EDGE('',*,*,#6464,.F.);\r
+-#6467=ORIENTED_EDGE('',*,*,#6466,.F.);\r
+-#6468=EDGE_LOOP('',(#6465,#6467));\r
+-#6469=FACE_BOUND('',#6468,.F.);\r
+-#6471=ORIENTED_EDGE('',*,*,#6470,.F.);\r
+-#6473=ORIENTED_EDGE('',*,*,#6472,.F.);\r
+-#6474=EDGE_LOOP('',(#6471,#6473));\r
+-#6475=FACE_BOUND('',#6474,.F.);\r
+-#6477=ORIENTED_EDGE('',*,*,#6476,.F.);\r
+-#6479=ORIENTED_EDGE('',*,*,#6478,.F.);\r
+-#6480=EDGE_LOOP('',(#6477,#6479));\r
+-#6481=FACE_BOUND('',#6480,.F.);\r
+-#6483=ORIENTED_EDGE('',*,*,#6482,.F.);\r
+-#6485=ORIENTED_EDGE('',*,*,#6484,.F.);\r
+-#6486=EDGE_LOOP('',(#6483,#6485));\r
+-#6487=FACE_BOUND('',#6486,.F.);\r
+-#6488=ADVANCED_FACE('',(#6333,#6339,#6345,#6351,#6357,#6363,#6369,#6375,#6381,\r
+-#6387,#6393,#6399,#6417,#6451,#6457,#6463,#6469,#6475,#6481,#6487),#6283,.T.);\r
+-#6489=CARTESIAN_POINT('',(6.45E0,1.176878221735E0,2.975E1));\r
+-#6490=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6491=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6492=AXIS2_PLACEMENT_3D('',#6489,#6490,#6491);\r
+-#6493=CYLINDRICAL_SURFACE('',#6492,1.E-1);\r
+-#6494=ORIENTED_EDGE('',*,*,#6334,.T.);\r
+-#6496=ORIENTED_EDGE('',*,*,#6495,.F.);\r
+-#6498=ORIENTED_EDGE('',*,*,#6497,.F.);\r
+-#6500=ORIENTED_EDGE('',*,*,#6499,.T.);\r
+-#6501=EDGE_LOOP('',(#6494,#6496,#6498,#6500));\r
+-#6502=FACE_OUTER_BOUND('',#6501,.F.);\r
+-#6503=ADVANCED_FACE('',(#6502),#6493,.F.);\r
+-#6504=CARTESIAN_POINT('',(6.45E0,1.176878221735E0,2.975E1));\r
+-#6505=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6506=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6507=AXIS2_PLACEMENT_3D('',#6504,#6505,#6506);\r
+-#6508=CYLINDRICAL_SURFACE('',#6507,1.E-1);\r
+-#6509=ORIENTED_EDGE('',*,*,#6336,.T.);\r
+-#6510=ORIENTED_EDGE('',*,*,#6499,.F.);\r
+-#6512=ORIENTED_EDGE('',*,*,#6511,.T.);\r
+-#6513=ORIENTED_EDGE('',*,*,#6495,.T.);\r
+-#6514=EDGE_LOOP('',(#6509,#6510,#6512,#6513));\r
+-#6515=FACE_OUTER_BOUND('',#6514,.F.);\r
+-#6516=ADVANCED_FACE('',(#6515),#6508,.F.);\r
+-#6517=CARTESIAN_POINT('',(6.45E0,1.234346967234E0,2.975E1));\r
+-#6518=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6519=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6520=AXIS2_PLACEMENT_3D('',#6517,#6518,#6519);\r
+-#6521=CONICAL_SURFACE('',#6520,7.288815195685E-2,6.E1);\r
+-#6523=ORIENTED_EDGE('',*,*,#6522,.T.);\r
+-#6524=ORIENTED_EDGE('',*,*,#6511,.F.);\r
+-#6526=ORIENTED_EDGE('',*,*,#6525,.F.);\r
+-#6527=EDGE_LOOP('',(#6523,#6524,#6526));\r
+-#6528=FACE_OUTER_BOUND('',#6527,.F.);\r
+-#6529=ADVANCED_FACE('',(#6528),#6521,.F.);\r
+-#6530=CARTESIAN_POINT('',(6.45E0,1.234346967234E0,2.975E1));\r
+-#6531=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6532=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6533=AXIS2_PLACEMENT_3D('',#6530,#6531,#6532);\r
+-#6534=CONICAL_SURFACE('',#6533,7.288815195685E-2,6.E1);\r
+-#6535=ORIENTED_EDGE('',*,*,#6522,.F.);\r
+-#6536=ORIENTED_EDGE('',*,*,#6525,.T.);\r
+-#6537=ORIENTED_EDGE('',*,*,#6497,.T.);\r
+-#6538=EDGE_LOOP('',(#6535,#6536,#6537));\r
+-#6539=FACE_OUTER_BOUND('',#6538,.F.);\r
+-#6540=ADVANCED_FACE('',(#6539),#6534,.F.);\r
+-#6541=CARTESIAN_POINT('',(7.45E0,1.176878221735E0,2.975E1));\r
+-#6542=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6543=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6544=AXIS2_PLACEMENT_3D('',#6541,#6542,#6543);\r
+-#6545=CYLINDRICAL_SURFACE('',#6544,1.E-1);\r
+-#6546=ORIENTED_EDGE('',*,*,#6340,.T.);\r
+-#6548=ORIENTED_EDGE('',*,*,#6547,.F.);\r
+-#6550=ORIENTED_EDGE('',*,*,#6549,.F.);\r
+-#6552=ORIENTED_EDGE('',*,*,#6551,.T.);\r
+-#6553=EDGE_LOOP('',(#6546,#6548,#6550,#6552));\r
+-#6554=FACE_OUTER_BOUND('',#6553,.F.);\r
+-#6555=ADVANCED_FACE('',(#6554),#6545,.F.);\r
+-#6556=CARTESIAN_POINT('',(7.45E0,1.176878221735E0,2.975E1));\r
+-#6557=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6558=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6559=AXIS2_PLACEMENT_3D('',#6556,#6557,#6558);\r
+-#6560=CYLINDRICAL_SURFACE('',#6559,1.E-1);\r
+-#6561=ORIENTED_EDGE('',*,*,#6342,.T.);\r
+-#6562=ORIENTED_EDGE('',*,*,#6551,.F.);\r
+-#6564=ORIENTED_EDGE('',*,*,#6563,.T.);\r
+-#6565=ORIENTED_EDGE('',*,*,#6547,.T.);\r
+-#6566=EDGE_LOOP('',(#6561,#6562,#6564,#6565));\r
+-#6567=FACE_OUTER_BOUND('',#6566,.F.);\r
+-#6568=ADVANCED_FACE('',(#6567),#6560,.F.);\r
+-#6569=CARTESIAN_POINT('',(7.45E0,1.234346967234E0,2.975E1));\r
+-#6570=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6571=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6572=AXIS2_PLACEMENT_3D('',#6569,#6570,#6571);\r
+-#6573=CONICAL_SURFACE('',#6572,7.288815195685E-2,6.E1);\r
+-#6575=ORIENTED_EDGE('',*,*,#6574,.T.);\r
+-#6576=ORIENTED_EDGE('',*,*,#6563,.F.);\r
+-#6578=ORIENTED_EDGE('',*,*,#6577,.F.);\r
+-#6579=EDGE_LOOP('',(#6575,#6576,#6578));\r
+-#6580=FACE_OUTER_BOUND('',#6579,.F.);\r
+-#6581=ADVANCED_FACE('',(#6580),#6573,.F.);\r
+-#6582=CARTESIAN_POINT('',(7.45E0,1.234346967234E0,2.975E1));\r
+-#6583=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6584=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6585=AXIS2_PLACEMENT_3D('',#6582,#6583,#6584);\r
+-#6586=CONICAL_SURFACE('',#6585,7.288815195685E-2,6.E1);\r
+-#6587=ORIENTED_EDGE('',*,*,#6574,.F.);\r
+-#6588=ORIENTED_EDGE('',*,*,#6577,.T.);\r
+-#6589=ORIENTED_EDGE('',*,*,#6549,.T.);\r
+-#6590=EDGE_LOOP('',(#6587,#6588,#6589));\r
+-#6591=FACE_OUTER_BOUND('',#6590,.F.);\r
+-#6592=ADVANCED_FACE('',(#6591),#6586,.F.);\r
+-#6593=CARTESIAN_POINT('',(2.046862696660E1,-7.805924235695E-2,7.E0));\r
+-#6594=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6595=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6596=AXIS2_PLACEMENT_3D('',#6593,#6594,#6595);\r
+-#6597=CYLINDRICAL_SURFACE('',#6596,1.E0);\r
+-#6598=ORIENTED_EDGE('',*,*,#5961,.F.);\r
+-#6599=ORIENTED_EDGE('',*,*,#5550,.T.);\r
+-#6601=ORIENTED_EDGE('',*,*,#6600,.T.);\r
+-#6602=ORIENTED_EDGE('',*,*,#6221,.T.);\r
+-#6603=EDGE_LOOP('',(#6598,#6599,#6601,#6602));\r
+-#6604=FACE_OUTER_BOUND('',#6603,.F.);\r
+-#6605=ADVANCED_FACE('',(#6604),#6597,.F.);\r
+-#6606=CARTESIAN_POINT('',(1.65E1,1.562633489099E0,7.5E0));\r
+-#6607=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6608=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6609=AXIS2_PLACEMENT_3D('',#6606,#6607,#6608);\r
+-#6610=CYLINDRICAL_SURFACE('',#6609,5.E0);\r
+-#6611=ORIENTED_EDGE('',*,*,#6600,.F.);\r
+-#6612=ORIENTED_EDGE('',*,*,#5548,.T.);\r
+-#6614=ORIENTED_EDGE('',*,*,#6613,.F.);\r
+-#6615=ORIENTED_EDGE('',*,*,#6223,.T.);\r
+-#6616=EDGE_LOOP('',(#6611,#6612,#6614,#6615));\r
+-#6617=FACE_OUTER_BOUND('',#6616,.F.);\r
+-#6618=ADVANCED_FACE('',(#6617),#6610,.F.);\r
+-#6619=CARTESIAN_POINT('',(2.15E1,1.5E0,2.5E0));\r
+-#6620=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6621=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6622=AXIS2_PLACEMENT_3D('',#6619,#6620,#6621);\r
+-#6623=PLANE('',#6622);\r
+-#6625=ORIENTED_EDGE('',*,*,#6624,.F.);\r
+-#6626=ORIENTED_EDGE('',*,*,#6225,.F.);\r
+-#6627=ORIENTED_EDGE('',*,*,#6613,.T.);\r
+-#6628=ORIENTED_EDGE('',*,*,#5546,.T.);\r
+-#6629=EDGE_LOOP('',(#6625,#6626,#6627,#6628));\r
+-#6630=FACE_OUTER_BOUND('',#6629,.F.);\r
+-#6631=ADVANCED_FACE('',(#6630),#6623,.F.);\r
+-#6632=CARTESIAN_POINT('',(7.5E0,1.562633489099E0,7.5E0));\r
+-#6633=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6634=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6635=AXIS2_PLACEMENT_3D('',#6632,#6633,#6634);\r
+-#6636=CYLINDRICAL_SURFACE('',#6635,5.E0);\r
+-#6638=ORIENTED_EDGE('',*,*,#6637,.F.);\r
+-#6639=ORIENTED_EDGE('',*,*,#6227,.T.);\r
+-#6640=ORIENTED_EDGE('',*,*,#6624,.T.);\r
+-#6641=ORIENTED_EDGE('',*,*,#5544,.T.);\r
+-#6642=EDGE_LOOP('',(#6638,#6639,#6640,#6641));\r
+-#6643=FACE_OUTER_BOUND('',#6642,.F.);\r
+-#6644=ADVANCED_FACE('',(#6643),#6636,.F.);\r
+-#6645=CARTESIAN_POINT('',(3.531373033403E0,1.157860978230E1,7.E0));\r
+-#6646=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6647=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6648=AXIS2_PLACEMENT_3D('',#6645,#6646,#6647);\r
+-#6649=CYLINDRICAL_SURFACE('',#6648,1.E0);\r
+-#6650=ORIENTED_EDGE('',*,*,#5991,.F.);\r
+-#6651=ORIENTED_EDGE('',*,*,#6229,.T.);\r
+-#6652=ORIENTED_EDGE('',*,*,#6637,.T.);\r
+-#6653=ORIENTED_EDGE('',*,*,#5542,.T.);\r
+-#6654=EDGE_LOOP('',(#6650,#6651,#6652,#6653));\r
+-#6655=FACE_OUTER_BOUND('',#6654,.F.);\r
+-#6656=ADVANCED_FACE('',(#6655),#6649,.F.);\r
+-#6657=CARTESIAN_POINT('',(-1.E0,1.161044894892E1,7.E0));\r
+-#6658=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6659=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6660=AXIS2_PLACEMENT_3D('',#6657,#6658,#6659);\r
+-#6661=CYLINDRICAL_SURFACE('',#6660,1.E0);\r
+-#6663=ORIENTED_EDGE('',*,*,#6662,.F.);\r
+-#6664=ORIENTED_EDGE('',*,*,#6232,.T.);\r
+-#6665=ORIENTED_EDGE('',*,*,#5987,.T.);\r
+-#6666=ORIENTED_EDGE('',*,*,#5508,.T.);\r
+-#6667=EDGE_LOOP('',(#6663,#6664,#6665,#6666));\r
+-#6668=FACE_OUTER_BOUND('',#6667,.F.);\r
+-#6669=ADVANCED_FACE('',(#6668),#6661,.F.);\r
+-#6670=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));\r
+-#6671=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6672=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6673=AXIS2_PLACEMENT_3D('',#6670,#6671,#6672);\r
+-#6674=PLANE('',#6673);\r
+-#6676=ORIENTED_EDGE('',*,*,#6675,.T.);\r
+-#6677=ORIENTED_EDGE('',*,*,#6302,.T.);\r
+-#6679=ORIENTED_EDGE('',*,*,#6678,.F.);\r
+-#6680=ORIENTED_EDGE('',*,*,#5520,.F.);\r
+-#6681=EDGE_LOOP('',(#6676,#6677,#6679,#6680));\r
+-#6682=FACE_OUTER_BOUND('',#6681,.F.);\r
+-#6683=ADVANCED_FACE('',(#6682),#6674,.T.);\r
+-#6684=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));\r
+-#6685=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6686=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6687=AXIS2_PLACEMENT_3D('',#6684,#6685,#6686);\r
+-#6688=PLANE('',#6687);\r
+-#6689=ORIENTED_EDGE('',*,*,#6662,.T.);\r
+-#6690=ORIENTED_EDGE('',*,*,#5506,.F.);\r
+-#6692=ORIENTED_EDGE('',*,*,#6691,.T.);\r
+-#6693=ORIENTED_EDGE('',*,*,#6234,.T.);\r
+-#6694=EDGE_LOOP('',(#6689,#6690,#6692,#6693));\r
+-#6695=FACE_OUTER_BOUND('',#6694,.F.);\r
+-#6696=ADVANCED_FACE('',(#6695),#6688,.T.);\r
+-#6697=CARTESIAN_POINT('',(-1.E0,-5.722942641981E-2,1.325E1));\r
+-#6698=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6699=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6700=AXIS2_PLACEMENT_3D('',#6697,#6698,#6699);\r
+-#6701=CYLINDRICAL_SURFACE('',#6700,1.E0);\r
+-#6702=ORIENTED_EDGE('',*,*,#6675,.F.);\r
+-#6703=ORIENTED_EDGE('',*,*,#5518,.T.);\r
+-#6705=ORIENTED_EDGE('',*,*,#6704,.T.);\r
+-#6706=ORIENTED_EDGE('',*,*,#6304,.T.);\r
+-#6707=EDGE_LOOP('',(#6702,#6703,#6705,#6706));\r
+-#6708=FACE_OUTER_BOUND('',#6707,.F.);\r
+-#6709=ADVANCED_FACE('',(#6708),#6701,.F.);\r
+-#6710=CARTESIAN_POINT('',(-2.E0,0.E0,1.225E1));\r
+-#6711=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6712=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6713=AXIS2_PLACEMENT_3D('',#6710,#6711,#6712);\r
+-#6714=PLANE('',#6713);\r
+-#6716=ORIENTED_EDGE('',*,*,#6715,.F.);\r
+-#6717=ORIENTED_EDGE('',*,*,#6442,.T.);\r
+-#6719=ORIENTED_EDGE('',*,*,#6718,.F.);\r
+-#6720=ORIENTED_EDGE('',*,*,#5668,.F.);\r
+-#6721=EDGE_LOOP('',(#6716,#6717,#6719,#6720));\r
+-#6722=FACE_OUTER_BOUND('',#6721,.F.);\r
+-#6723=ADVANCED_FACE('',(#6722),#6714,.T.);\r
+-#6724=CARTESIAN_POINT('',(-2.E0,0.E0,1.225E1));\r
+-#6725=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6726=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6727=AXIS2_PLACEMENT_3D('',#6724,#6725,#6726);\r
+-#6728=PLANE('',#6727);\r
+-#6729=ORIENTED_EDGE('',*,*,#6704,.F.);\r
+-#6730=ORIENTED_EDGE('',*,*,#5516,.F.);\r
+-#6732=ORIENTED_EDGE('',*,*,#6731,.T.);\r
+-#6733=ORIENTED_EDGE('',*,*,#6306,.T.);\r
+-#6734=EDGE_LOOP('',(#6729,#6730,#6732,#6733));\r
+-#6735=FACE_OUTER_BOUND('',#6734,.F.);\r
+-#6736=ADVANCED_FACE('',(#6735),#6728,.T.);\r
+-#6737=CARTESIAN_POINT('',(3.5E0,1.566978255297E0,1.325E1));\r
+-#6738=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6739=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6740=AXIS2_PLACEMENT_3D('',#6737,#6738,#6739);\r
+-#6741=CYLINDRICAL_SURFACE('',#6740,1.E0);\r
+-#6743=ORIENTED_EDGE('',*,*,#6742,.F.);\r
+-#6744=ORIENTED_EDGE('',*,*,#6444,.T.);\r
+-#6745=ORIENTED_EDGE('',*,*,#6715,.T.);\r
+-#6746=ORIENTED_EDGE('',*,*,#5666,.T.);\r
+-#6747=EDGE_LOOP('',(#6743,#6744,#6745,#6746));\r
+-#6748=FACE_OUTER_BOUND('',#6747,.F.);\r
+-#6749=ADVANCED_FACE('',(#6748),#6741,.F.);\r
+-#6750=CARTESIAN_POINT('',(2.5E0,1.5E0,2.5E0));\r
+-#6751=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6752=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6753=AXIS2_PLACEMENT_3D('',#6750,#6751,#6752);\r
+-#6754=PLANE('',#6753);\r
+-#6756=ORIENTED_EDGE('',*,*,#6755,.T.);\r
+-#6757=ORIENTED_EDGE('',*,*,#5650,.T.);\r
+-#6759=ORIENTED_EDGE('',*,*,#6758,.F.);\r
+-#6760=ORIENTED_EDGE('',*,*,#6408,.F.);\r
+-#6761=EDGE_LOOP('',(#6756,#6757,#6759,#6760));\r
+-#6762=FACE_OUTER_BOUND('',#6761,.F.);\r
+-#6763=ADVANCED_FACE('',(#6762),#6754,.F.);\r
+-#6764=CARTESIAN_POINT('',(2.5E0,1.5E0,2.5E0));\r
+-#6765=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6766=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6767=AXIS2_PLACEMENT_3D('',#6764,#6765,#6766);\r
+-#6768=PLANE('',#6767);\r
+-#6770=ORIENTED_EDGE('',*,*,#6769,.T.);\r
+-#6771=ORIENTED_EDGE('',*,*,#6446,.F.);\r
+-#6772=ORIENTED_EDGE('',*,*,#6742,.T.);\r
+-#6773=ORIENTED_EDGE('',*,*,#5664,.T.);\r
+-#6774=EDGE_LOOP('',(#6770,#6771,#6772,#6773));\r
+-#6775=FACE_OUTER_BOUND('',#6774,.F.);\r
+-#6776=ADVANCED_FACE('',(#6775),#6768,.F.);\r
+-#6777=CARTESIAN_POINT('',(5.5E0,1.568923974228E0,2.19375E1));\r
+-#6778=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6779=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6780=AXIS2_PLACEMENT_3D('',#6777,#6778,#6779);\r
+-#6781=CYLINDRICAL_SURFACE('',#6780,3.E0);\r
+-#6782=ORIENTED_EDGE('',*,*,#6755,.F.);\r
+-#6783=ORIENTED_EDGE('',*,*,#6406,.T.);\r
+-#6785=ORIENTED_EDGE('',*,*,#6784,.T.);\r
+-#6786=ORIENTED_EDGE('',*,*,#5652,.T.);\r
+-#6787=EDGE_LOOP('',(#6782,#6783,#6785,#6786));\r
+-#6788=FACE_OUTER_BOUND('',#6787,.F.);\r
+-#6789=ADVANCED_FACE('',(#6788),#6781,.F.);\r
+-#6790=CARTESIAN_POINT('',(2.5E0,0.E0,1.89375E1));\r
+-#6791=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6792=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6793=AXIS2_PLACEMENT_3D('',#6790,#6791,#6792);\r
+-#6794=PLANE('',#6793);\r
+-#6795=ORIENTED_EDGE('',*,*,#6784,.F.);\r
+-#6796=ORIENTED_EDGE('',*,*,#6404,.T.);\r
+-#6798=ORIENTED_EDGE('',*,*,#6797,.F.);\r
+-#6799=ORIENTED_EDGE('',*,*,#5638,.F.);\r
+-#6800=EDGE_LOOP('',(#6795,#6796,#6798,#6799));\r
+-#6801=FACE_OUTER_BOUND('',#6800,.F.);\r
+-#6802=ADVANCED_FACE('',(#6801),#6794,.T.);\r
+-#6803=CARTESIAN_POINT('',(1.85E1,-5.889194178308E-2,2.19375E1));\r
+-#6804=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6805=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6806=AXIS2_PLACEMENT_3D('',#6803,#6804,#6805);\r
+-#6807=CYLINDRICAL_SURFACE('',#6806,3.E0);\r
+-#6809=ORIENTED_EDGE('',*,*,#6808,.F.);\r
+-#6810=ORIENTED_EDGE('',*,*,#5640,.T.);\r
+-#6811=ORIENTED_EDGE('',*,*,#6797,.T.);\r
+-#6812=ORIENTED_EDGE('',*,*,#6402,.T.);\r
+-#6813=EDGE_LOOP('',(#6809,#6810,#6811,#6812));\r
+-#6814=FACE_OUTER_BOUND('',#6813,.F.);\r
+-#6815=ADVANCED_FACE('',(#6814),#6807,.F.);\r
+-#6816=CARTESIAN_POINT('',(2.15E1,1.5E0,2.95E1));\r
+-#6817=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6818=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6819=AXIS2_PLACEMENT_3D('',#6816,#6817,#6818);\r
+-#6820=PLANE('',#6819);\r
+-#6821=ORIENTED_EDGE('',*,*,#6808,.T.);\r
+-#6822=ORIENTED_EDGE('',*,*,#6400,.F.);\r
+-#6824=ORIENTED_EDGE('',*,*,#6823,.T.);\r
+-#6825=ORIENTED_EDGE('',*,*,#5642,.T.);\r
+-#6826=EDGE_LOOP('',(#6821,#6822,#6824,#6825));\r
+-#6827=FACE_OUTER_BOUND('',#6826,.F.);\r
+-#6828=ADVANCED_FACE('',(#6827),#6820,.F.);\r
+-#6829=CARTESIAN_POINT('',(2.15E1,1.5E0,2.95E1));\r
+-#6830=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6831=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6832=AXIS2_PLACEMENT_3D('',#6829,#6830,#6831);\r
+-#6833=PLANE('',#6832);\r
+-#6835=ORIENTED_EDGE('',*,*,#6834,.T.);\r
+-#6836=ORIENTED_EDGE('',*,*,#5656,.T.);\r
+-#6838=ORIENTED_EDGE('',*,*,#6837,.T.);\r
+-#6839=ORIENTED_EDGE('',*,*,#6422,.F.);\r
+-#6840=EDGE_LOOP('',(#6835,#6836,#6838,#6839));\r
+-#6841=FACE_OUTER_BOUND('',#6840,.F.);\r
+-#6842=ADVANCED_FACE('',(#6841),#6833,.F.);\r
+-#6843=CARTESIAN_POINT('',(1.65E1,1.562633489099E0,2.45E1));\r
+-#6844=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6845=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6846=AXIS2_PLACEMENT_3D('',#6843,#6844,#6845);\r
+-#6847=CYLINDRICAL_SURFACE('',#6846,5.E0);\r
+-#6848=ORIENTED_EDGE('',*,*,#6823,.F.);\r
+-#6849=ORIENTED_EDGE('',*,*,#6414,.T.);\r
+-#6851=ORIENTED_EDGE('',*,*,#6850,.T.);\r
+-#6852=ORIENTED_EDGE('',*,*,#5644,.T.);\r
+-#6853=EDGE_LOOP('',(#6848,#6849,#6851,#6852));\r
+-#6854=FACE_OUTER_BOUND('',#6853,.F.);\r
+-#6855=ADVANCED_FACE('',(#6854),#6847,.F.);\r
+-#6856=CARTESIAN_POINT('',(2.5E0,1.5E0,2.95E1));\r
+-#6857=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6858=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6859=AXIS2_PLACEMENT_3D('',#6856,#6857,#6858);\r
+-#6860=PLANE('',#6859);\r
+-#6862=ORIENTED_EDGE('',*,*,#6861,.T.);\r
+-#6863=ORIENTED_EDGE('',*,*,#5646,.T.);\r
+-#6864=ORIENTED_EDGE('',*,*,#6850,.F.);\r
+-#6865=ORIENTED_EDGE('',*,*,#6412,.F.);\r
+-#6866=EDGE_LOOP('',(#6862,#6863,#6864,#6865));\r
+-#6867=FACE_OUTER_BOUND('',#6866,.F.);\r
+-#6868=ADVANCED_FACE('',(#6867),#6860,.F.);\r
+-#6869=CARTESIAN_POINT('',(7.5E0,1.562633489099E0,2.45E1));\r
+-#6870=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6871=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#6872=AXIS2_PLACEMENT_3D('',#6869,#6870,#6871);\r
+-#6873=CYLINDRICAL_SURFACE('',#6872,5.E0);\r
+-#6874=ORIENTED_EDGE('',*,*,#6861,.F.);\r
+-#6875=ORIENTED_EDGE('',*,*,#6410,.T.);\r
+-#6876=ORIENTED_EDGE('',*,*,#6758,.T.);\r
+-#6877=ORIENTED_EDGE('',*,*,#5648,.T.);\r
+-#6878=EDGE_LOOP('',(#6874,#6875,#6876,#6877));\r
+-#6879=FACE_OUTER_BOUND('',#6878,.F.);\r
+-#6880=ADVANCED_FACE('',(#6879),#6873,.F.);\r
+-#6881=CARTESIAN_POINT('',(1.85E1,1.568923974228E0,1.40625E1));\r
+-#6882=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6883=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6884=AXIS2_PLACEMENT_3D('',#6881,#6882,#6883);\r
+-#6885=CYLINDRICAL_SURFACE('',#6884,3.E0);\r
+-#6886=ORIENTED_EDGE('',*,*,#6834,.F.);\r
+-#6887=ORIENTED_EDGE('',*,*,#6420,.T.);\r
+-#6889=ORIENTED_EDGE('',*,*,#6888,.T.);\r
+-#6890=ORIENTED_EDGE('',*,*,#5658,.T.);\r
+-#6891=EDGE_LOOP('',(#6886,#6887,#6889,#6890));\r
+-#6892=FACE_OUTER_BOUND('',#6891,.F.);\r
+-#6893=ADVANCED_FACE('',(#6892),#6885,.F.);\r
+-#6894=CARTESIAN_POINT('',(2.15E1,0.E0,1.70625E1));\r
+-#6895=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6896=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6897=AXIS2_PLACEMENT_3D('',#6894,#6895,#6896);\r
+-#6898=PLANE('',#6897);\r
+-#6899=ORIENTED_EDGE('',*,*,#6888,.F.);\r
+-#6900=ORIENTED_EDGE('',*,*,#6418,.T.);\r
+-#6902=ORIENTED_EDGE('',*,*,#6901,.F.);\r
+-#6903=ORIENTED_EDGE('',*,*,#5660,.F.);\r
+-#6904=EDGE_LOOP('',(#6899,#6900,#6902,#6903));\r
+-#6905=FACE_OUTER_BOUND('',#6904,.F.);\r
+-#6906=ADVANCED_FACE('',(#6905),#6898,.T.);\r
+-#6907=CARTESIAN_POINT('',(5.5E0,-5.889194178308E-2,1.40625E1));\r
+-#6908=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6909=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6910=AXIS2_PLACEMENT_3D('',#6907,#6908,#6909);\r
+-#6911=CYLINDRICAL_SURFACE('',#6910,3.E0);\r
+-#6912=ORIENTED_EDGE('',*,*,#6769,.F.);\r
+-#6913=ORIENTED_EDGE('',*,*,#5662,.T.);\r
+-#6914=ORIENTED_EDGE('',*,*,#6901,.T.);\r
+-#6915=ORIENTED_EDGE('',*,*,#6448,.T.);\r
+-#6916=EDGE_LOOP('',(#6912,#6913,#6914,#6915));\r
+-#6917=FACE_OUTER_BOUND('',#6916,.F.);\r
+-#6918=ADVANCED_FACE('',(#6917),#6911,.F.);\r
+-#6919=CARTESIAN_POINT('',(2.05E1,-5.889194178308E-2,1.325E1));\r
+-#6920=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#6921=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6922=AXIS2_PLACEMENT_3D('',#6919,#6920,#6921);\r
+-#6923=CYLINDRICAL_SURFACE('',#6922,1.E0);\r
+-#6924=ORIENTED_EDGE('',*,*,#6837,.F.);\r
+-#6925=ORIENTED_EDGE('',*,*,#5686,.T.);\r
+-#6927=ORIENTED_EDGE('',*,*,#6926,.T.);\r
+-#6928=ORIENTED_EDGE('',*,*,#6424,.T.);\r
+-#6929=EDGE_LOOP('',(#6924,#6925,#6927,#6928));\r
+-#6930=FACE_OUTER_BOUND('',#6929,.F.);\r
+-#6931=ADVANCED_FACE('',(#6930),#6923,.F.);\r
+-#6932=CARTESIAN_POINT('',(2.6E1,0.E0,1.225E1));\r
+-#6933=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6934=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6935=AXIS2_PLACEMENT_3D('',#6932,#6933,#6934);\r
+-#6936=PLANE('',#6935);\r
+-#6938=ORIENTED_EDGE('',*,*,#6937,.F.);\r
+-#6939=ORIENTED_EDGE('',*,*,#6290,.F.);\r
+-#6941=ORIENTED_EDGE('',*,*,#6940,.T.);\r
+-#6942=ORIENTED_EDGE('',*,*,#5532,.T.);\r
+-#6943=EDGE_LOOP('',(#6938,#6939,#6941,#6942));\r
+-#6944=FACE_OUTER_BOUND('',#6943,.F.);\r
+-#6945=ADVANCED_FACE('',(#6944),#6936,.F.);\r
+-#6946=CARTESIAN_POINT('',(2.6E1,0.E0,1.225E1));\r
+-#6947=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6948=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6949=AXIS2_PLACEMENT_3D('',#6946,#6947,#6948);\r
+-#6950=PLANE('',#6949);\r
+-#6951=ORIENTED_EDGE('',*,*,#6926,.F.);\r
+-#6952=ORIENTED_EDGE('',*,*,#5684,.T.);\r
+-#6954=ORIENTED_EDGE('',*,*,#6953,.F.);\r
+-#6955=ORIENTED_EDGE('',*,*,#6426,.F.);\r
+-#6956=EDGE_LOOP('',(#6951,#6952,#6954,#6955));\r
+-#6957=FACE_OUTER_BOUND('',#6956,.F.);\r
+-#6958=ADVANCED_FACE('',(#6957),#6950,.F.);\r
+-#6959=CARTESIAN_POINT('',(2.5E1,1.568923974228E0,1.325E1));\r
+-#6960=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#6961=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#6962=AXIS2_PLACEMENT_3D('',#6959,#6960,#6961);\r
+-#6963=CYLINDRICAL_SURFACE('',#6962,1.E0);\r
+-#6965=ORIENTED_EDGE('',*,*,#6964,.F.);\r
+-#6966=ORIENTED_EDGE('',*,*,#6292,.T.);\r
+-#6967=ORIENTED_EDGE('',*,*,#6937,.T.);\r
+-#6968=ORIENTED_EDGE('',*,*,#5530,.T.);\r
+-#6969=EDGE_LOOP('',(#6965,#6966,#6967,#6968));\r
+-#6970=FACE_OUTER_BOUND('',#6969,.F.);\r
+-#6971=ADVANCED_FACE('',(#6970),#6963,.F.);\r
+-#6972=CARTESIAN_POINT('',(2.4E1,0.E0,3.2E1));\r
+-#6973=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6974=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6975=AXIS2_PLACEMENT_3D('',#6972,#6973,#6974);\r
+-#6976=PLANE('',#6975);\r
+-#6977=ORIENTED_EDGE('',*,*,#6964,.T.);\r
+-#6978=ORIENTED_EDGE('',*,*,#5528,.F.);\r
+-#6980=ORIENTED_EDGE('',*,*,#6979,.T.);\r
+-#6981=ORIENTED_EDGE('',*,*,#6294,.T.);\r
+-#6982=EDGE_LOOP('',(#6977,#6978,#6980,#6981));\r
+-#6983=FACE_OUTER_BOUND('',#6982,.F.);\r
+-#6984=ADVANCED_FACE('',(#6983),#6976,.T.);\r
+-#6985=CARTESIAN_POINT('',(2.4E1,0.E0,3.2E1));\r
+-#6986=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#6987=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#6988=AXIS2_PLACEMENT_3D('',#6985,#6986,#6987);\r
+-#6989=PLANE('',#6988);\r
+-#6991=ORIENTED_EDGE('',*,*,#6990,.T.);\r
+-#6992=ORIENTED_EDGE('',*,*,#6242,.T.);\r
+-#6994=ORIENTED_EDGE('',*,*,#6993,.F.);\r
+-#6995=ORIENTED_EDGE('',*,*,#5498,.F.);\r
+-#6996=EDGE_LOOP('',(#6991,#6992,#6994,#6995));\r
+-#6997=FACE_OUTER_BOUND('',#6996,.F.);\r
+-#6998=ADVANCED_FACE('',(#6997),#6989,.T.);\r
+-#6999=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));\r
+-#7000=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7001=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7002=AXIS2_PLACEMENT_3D('',#6999,#7000,#7001);\r
+-#7003=PLANE('',#7002);\r
+-#7004=ORIENTED_EDGE('',*,*,#6979,.F.);\r
+-#7005=ORIENTED_EDGE('',*,*,#5526,.T.);\r
+-#7007=ORIENTED_EDGE('',*,*,#7006,.T.);\r
+-#7008=ORIENTED_EDGE('',*,*,#6296,.F.);\r
+-#7009=EDGE_LOOP('',(#7004,#7005,#7007,#7008));\r
+-#7010=FACE_OUTER_BOUND('',#7009,.F.);\r
+-#7011=ADVANCED_FACE('',(#7010),#7003,.T.);\r
+-#7012=CARTESIAN_POINT('',(0.E0,0.E0,3.2E1));\r
+-#7013=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7014=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7015=AXIS2_PLACEMENT_3D('',#7012,#7013,#7014);\r
+-#7016=PLANE('',#7015);\r
+-#7017=ORIENTED_EDGE('',*,*,#5524,.F.);\r
+-#7019=ORIENTED_EDGE('',*,*,#7018,.T.);\r
+-#7020=ORIENTED_EDGE('',*,*,#6298,.T.);\r
+-#7021=ORIENTED_EDGE('',*,*,#7006,.F.);\r
+-#7022=EDGE_LOOP('',(#7017,#7019,#7020,#7021));\r
+-#7023=FACE_OUTER_BOUND('',#7022,.F.);\r
+-#7024=ADVANCED_FACE('',(#7023),#7016,.T.);\r
+-#7025=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));\r
+-#7026=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7027=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7028=AXIS2_PLACEMENT_3D('',#7025,#7026,#7027);\r
+-#7029=PLANE('',#7028);\r
+-#7030=ORIENTED_EDGE('',*,*,#7018,.F.);\r
+-#7031=ORIENTED_EDGE('',*,*,#5522,.T.);\r
+-#7032=ORIENTED_EDGE('',*,*,#6678,.T.);\r
+-#7033=ORIENTED_EDGE('',*,*,#6300,.F.);\r
+-#7034=EDGE_LOOP('',(#7030,#7031,#7032,#7033));\r
+-#7035=FACE_OUTER_BOUND('',#7034,.F.);\r
+-#7036=ADVANCED_FACE('',(#7035),#7029,.T.);\r
+-#7037=CARTESIAN_POINT('',(2.5E1,-7.055249658685E-2,7.E0));\r
+-#7038=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7039=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7040=AXIS2_PLACEMENT_3D('',#7037,#7038,#7039);\r
+-#7041=CYLINDRICAL_SURFACE('',#7040,1.E0);\r
+-#7042=ORIENTED_EDGE('',*,*,#6990,.F.);\r
+-#7043=ORIENTED_EDGE('',*,*,#5496,.T.);\r
+-#7044=ORIENTED_EDGE('',*,*,#5965,.T.);\r
+-#7045=ORIENTED_EDGE('',*,*,#6244,.T.);\r
+-#7046=EDGE_LOOP('',(#7042,#7043,#7044,#7045));\r
+-#7047=FACE_OUTER_BOUND('',#7046,.F.);\r
+-#7048=ADVANCED_FACE('',(#7047),#7041,.F.);\r
+-#7049=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));\r
+-#7050=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#7051=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7052=AXIS2_PLACEMENT_3D('',#7049,#7050,#7051);\r
+-#7053=PLANE('',#7052);\r
+-#7055=ORIENTED_EDGE('',*,*,#7054,.F.);\r
+-#7056=ORIENTED_EDGE('',*,*,#5500,.T.);\r
+-#7057=ORIENTED_EDGE('',*,*,#6993,.T.);\r
+-#7058=ORIENTED_EDGE('',*,*,#6240,.F.);\r
+-#7059=EDGE_LOOP('',(#7055,#7056,#7057,#7058));\r
+-#7060=FACE_OUTER_BOUND('',#7059,.F.);\r
+-#7061=ADVANCED_FACE('',(#7060),#7053,.T.);\r
+-#7062=CARTESIAN_POINT('',(2.4E1,0.E0,0.E0));\r
+-#7063=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7064=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7065=AXIS2_PLACEMENT_3D('',#7062,#7063,#7064);\r
+-#7066=PLANE('',#7065);\r
+-#7067=ORIENTED_EDGE('',*,*,#5502,.F.);\r
+-#7068=ORIENTED_EDGE('',*,*,#7054,.T.);\r
+-#7069=ORIENTED_EDGE('',*,*,#6238,.T.);\r
+-#7071=ORIENTED_EDGE('',*,*,#7070,.F.);\r
+-#7072=EDGE_LOOP('',(#7067,#7068,#7069,#7071));\r
+-#7073=FACE_OUTER_BOUND('',#7072,.F.);\r
+-#7074=ADVANCED_FACE('',(#7073),#7066,.T.);\r
+-#7075=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));\r
+-#7076=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#7077=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7078=AXIS2_PLACEMENT_3D('',#7075,#7076,#7077);\r
+-#7079=PLANE('',#7078);\r
+-#7080=ORIENTED_EDGE('',*,*,#6691,.F.);\r
+-#7081=ORIENTED_EDGE('',*,*,#5504,.T.);\r
+-#7082=ORIENTED_EDGE('',*,*,#7070,.T.);\r
+-#7083=ORIENTED_EDGE('',*,*,#6236,.F.);\r
+-#7084=EDGE_LOOP('',(#7080,#7081,#7082,#7083));\r
+-#7085=FACE_OUTER_BOUND('',#7084,.F.);\r
+-#7086=ADVANCED_FACE('',(#7085),#7079,.T.);\r
+-#7087=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));\r
+-#7088=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7089=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7090=AXIS2_PLACEMENT_3D('',#7087,#7088,#7089);\r
+-#7091=PLANE('',#7090);\r
+-#7092=ORIENTED_EDGE('',*,*,#6940,.F.);\r
+-#7093=ORIENTED_EDGE('',*,*,#6288,.T.);\r
+-#7095=ORIENTED_EDGE('',*,*,#7094,.T.);\r
+-#7096=ORIENTED_EDGE('',*,*,#5534,.F.);\r
+-#7097=EDGE_LOOP('',(#7092,#7093,#7095,#7096));\r
+-#7098=FACE_OUTER_BOUND('',#7097,.F.);\r
+-#7099=ADVANCED_FACE('',(#7098),#7091,.T.);\r
+-#7100=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));\r
+-#7101=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7102=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7103=AXIS2_PLACEMENT_3D('',#7100,#7101,#7102);\r
+-#7104=PLANE('',#7103);\r
+-#7105=ORIENTED_EDGE('',*,*,#5968,.T.);\r
+-#7106=ORIENTED_EDGE('',*,*,#5536,.T.);\r
+-#7107=ORIENTED_EDGE('',*,*,#7094,.F.);\r
+-#7108=ORIENTED_EDGE('',*,*,#6286,.F.);\r
+-#7109=ORIENTED_EDGE('',*,*,#6165,.F.);\r
+-#7111=ORIENTED_EDGE('',*,*,#7110,.F.);\r
+-#7112=EDGE_LOOP('',(#7105,#7106,#7107,#7108,#7109,#7111));\r
+-#7113=FACE_OUTER_BOUND('',#7112,.F.);\r
+-#7114=ADVANCED_FACE('',(#7113),#7104,.F.);\r
+-#7115=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));\r
+-#7116=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));\r
+-#7117=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#7118=AXIS2_PLACEMENT_3D('',#7115,#7116,#7117);\r
+-#7119=PLANE('',#7118);\r
+-#7120=ORIENTED_EDGE('',*,*,#5970,.T.);\r
+-#7121=ORIENTED_EDGE('',*,*,#7110,.T.);\r
+-#7122=ORIENTED_EDGE('',*,*,#6163,.F.);\r
+-#7124=ORIENTED_EDGE('',*,*,#7123,.F.);\r
+-#7125=EDGE_LOOP('',(#7120,#7121,#7122,#7124));\r
+-#7126=FACE_OUTER_BOUND('',#7125,.F.);\r
+-#7127=ADVANCED_FACE('',(#7126),#7119,.F.);\r
+-#7128=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));\r
+-#7129=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7130=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7131=AXIS2_PLACEMENT_3D('',#7128,#7129,#7130);\r
+-#7132=PLANE('',#7131);\r
+-#7133=ORIENTED_EDGE('',*,*,#5972,.F.);\r
+-#7134=ORIENTED_EDGE('',*,*,#7123,.T.);\r
+-#7135=ORIENTED_EDGE('',*,*,#6161,.F.);\r
+-#7137=ORIENTED_EDGE('',*,*,#7136,.F.);\r
+-#7138=EDGE_LOOP('',(#7133,#7134,#7135,#7137));\r
+-#7139=FACE_OUTER_BOUND('',#7138,.F.);\r
+-#7141=ORIENTED_EDGE('',*,*,#7140,.T.);\r
+-#7143=ORIENTED_EDGE('',*,*,#7142,.T.);\r
+-#7144=EDGE_LOOP('',(#7141,#7143));\r
+-#7145=FACE_BOUND('',#7144,.F.);\r
+-#7147=ORIENTED_EDGE('',*,*,#7146,.T.);\r
+-#7149=ORIENTED_EDGE('',*,*,#7148,.T.);\r
+-#7150=EDGE_LOOP('',(#7147,#7149));\r
+-#7151=FACE_BOUND('',#7150,.F.);\r
+-#7152=ADVANCED_FACE('',(#7139,#7145,#7151),#7132,.F.);\r
+-#7153=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));\r
+-#7154=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7155=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7156=AXIS2_PLACEMENT_3D('',#7153,#7154,#7155);\r
+-#7157=PLANE('',#7156);\r
+-#7159=ORIENTED_EDGE('',*,*,#7158,.T.);\r
+-#7160=ORIENTED_EDGE('',*,*,#6430,.F.);\r
+-#7162=ORIENTED_EDGE('',*,*,#7161,.T.);\r
+-#7163=ORIENTED_EDGE('',*,*,#5680,.T.);\r
+-#7164=EDGE_LOOP('',(#7159,#7160,#7162,#7163));\r
+-#7165=FACE_OUTER_BOUND('',#7164,.F.);\r
+-#7166=ADVANCED_FACE('',(#7165),#7157,.F.);\r
+-#7167=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));\r
+-#7168=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7169=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7170=AXIS2_PLACEMENT_3D('',#7167,#7168,#7169);\r
+-#7171=PLANE('',#7170);\r
+-#7172=ORIENTED_EDGE('',*,*,#6325,.F.);\r
+-#7173=ORIENTED_EDGE('',*,*,#5974,.T.);\r
+-#7174=ORIENTED_EDGE('',*,*,#7136,.T.);\r
+-#7175=ORIENTED_EDGE('',*,*,#6159,.F.);\r
+-#7176=EDGE_LOOP('',(#7172,#7173,#7174,#7175));\r
+-#7177=FACE_OUTER_BOUND('',#7176,.F.);\r
+-#7178=ADVANCED_FACE('',(#7177),#7171,.F.);\r
+-#7179=CARTESIAN_POINT('',(1.8E1,-7.099592191979E-2,1.1E1));\r
+-#7180=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7181=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7182=AXIS2_PLACEMENT_3D('',#7179,#7180,#7181);\r
+-#7183=CYLINDRICAL_SURFACE('',#7182,1.E0);\r
+-#7184=ORIENTED_EDGE('',*,*,#7158,.F.);\r
+-#7185=ORIENTED_EDGE('',*,*,#5678,.T.);\r
+-#7187=ORIENTED_EDGE('',*,*,#7186,.T.);\r
+-#7188=ORIENTED_EDGE('',*,*,#6432,.T.);\r
+-#7189=EDGE_LOOP('',(#7184,#7185,#7187,#7188));\r
+-#7190=FACE_OUTER_BOUND('',#7189,.F.);\r
+-#7191=ADVANCED_FACE('',(#7190),#7183,.F.);\r
+-#7192=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));\r
+-#7193=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7194=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7195=AXIS2_PLACEMENT_3D('',#7192,#7193,#7194);\r
+-#7196=PLANE('',#7195);\r
+-#7198=ORIENTED_EDGE('',*,*,#7197,.F.);\r
+-#7199=ORIENTED_EDGE('',*,*,#6434,.T.);\r
+-#7200=ORIENTED_EDGE('',*,*,#7186,.F.);\r
+-#7201=ORIENTED_EDGE('',*,*,#5676,.F.);\r
+-#7202=EDGE_LOOP('',(#7198,#7199,#7200,#7201));\r
+-#7203=FACE_OUTER_BOUND('',#7202,.F.);\r
+-#7204=ADVANCED_FACE('',(#7203),#7196,.T.);\r
+-#7205=CARTESIAN_POINT('',(6.E0,1.567729432957E0,1.1E1));\r
+-#7206=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7207=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7208=AXIS2_PLACEMENT_3D('',#7205,#7206,#7207);\r
+-#7209=CYLINDRICAL_SURFACE('',#7208,1.E0);\r
+-#7211=ORIENTED_EDGE('',*,*,#7210,.F.);\r
+-#7212=ORIENTED_EDGE('',*,*,#6436,.T.);\r
+-#7213=ORIENTED_EDGE('',*,*,#7197,.T.);\r
+-#7214=ORIENTED_EDGE('',*,*,#5674,.T.);\r
+-#7215=EDGE_LOOP('',(#7211,#7212,#7213,#7214));\r
+-#7216=FACE_OUTER_BOUND('',#7215,.F.);\r
+-#7217=ADVANCED_FACE('',(#7216),#7209,.F.);\r
+-#7218=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));\r
+-#7219=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7220=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7221=AXIS2_PLACEMENT_3D('',#7218,#7219,#7220);\r
+-#7222=PLANE('',#7221);\r
+-#7223=ORIENTED_EDGE('',*,*,#7210,.T.);\r
+-#7224=ORIENTED_EDGE('',*,*,#5672,.F.);\r
+-#7226=ORIENTED_EDGE('',*,*,#7225,.T.);\r
+-#7227=ORIENTED_EDGE('',*,*,#6438,.T.);\r
+-#7228=EDGE_LOOP('',(#7223,#7224,#7226,#7227));\r
+-#7229=FACE_OUTER_BOUND('',#7228,.F.);\r
+-#7230=ADVANCED_FACE('',(#7229),#7222,.T.);\r
+-#7231=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));\r
+-#7232=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7233=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7234=AXIS2_PLACEMENT_3D('',#7231,#7232,#7233);\r
+-#7235=PLANE('',#7234);\r
+-#7236=ORIENTED_EDGE('',*,*,#6322,.T.);\r
+-#7238=ORIENTED_EDGE('',*,*,#7237,.T.);\r
+-#7240=ORIENTED_EDGE('',*,*,#7239,.F.);\r
+-#7241=ORIENTED_EDGE('',*,*,#5978,.T.);\r
+-#7242=EDGE_LOOP('',(#7236,#7238,#7240,#7241));\r
+-#7243=FACE_OUTER_BOUND('',#7242,.F.);\r
+-#7244=ADVANCED_FACE('',(#7243),#7235,.T.);\r
+-#7245=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));\r
+-#7246=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7247=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7248=AXIS2_PLACEMENT_3D('',#7245,#7246,#7247);\r
+-#7249=PLANE('',#7248);\r
+-#7250=ORIENTED_EDGE('',*,*,#7225,.F.);\r
+-#7251=ORIENTED_EDGE('',*,*,#5670,.T.);\r
+-#7252=ORIENTED_EDGE('',*,*,#6718,.T.);\r
+-#7253=ORIENTED_EDGE('',*,*,#6440,.F.);\r
+-#7254=EDGE_LOOP('',(#7250,#7251,#7252,#7253));\r
+-#7255=FACE_OUTER_BOUND('',#7254,.F.);\r
+-#7256=ADVANCED_FACE('',(#7255),#7249,.T.);\r
+-#7257=CARTESIAN_POINT('',(0.E0,0.E0,1.E1));\r
+-#7258=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7259=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7260=AXIS2_PLACEMENT_3D('',#7257,#7258,#7259);\r
+-#7261=PLANE('',#7260);\r
+-#7263=ORIENTED_EDGE('',*,*,#7262,.F.);\r
+-#7264=ORIENTED_EDGE('',*,*,#6312,.F.);\r
+-#7266=ORIENTED_EDGE('',*,*,#7265,.F.);\r
+-#7268=ORIENTED_EDGE('',*,*,#7267,.F.);\r
+-#7270=ORIENTED_EDGE('',*,*,#7269,.F.);\r
+-#7271=ORIENTED_EDGE('',*,*,#7237,.F.);\r
+-#7272=ORIENTED_EDGE('',*,*,#6320,.F.);\r
+-#7274=ORIENTED_EDGE('',*,*,#7273,.T.);\r
+-#7276=ORIENTED_EDGE('',*,*,#7275,.F.);\r
+-#7277=EDGE_LOOP('',(#7263,#7264,#7266,#7268,#7270,#7271,#7272,#7274,#7276));\r
+-#7278=FACE_OUTER_BOUND('',#7277,.F.);\r
+-#7280=ORIENTED_EDGE('',*,*,#7279,.T.);\r
+-#7282=ORIENTED_EDGE('',*,*,#7281,.T.);\r
+-#7283=EDGE_LOOP('',(#7280,#7282));\r
+-#7284=FACE_BOUND('',#7283,.F.);\r
+-#7286=ORIENTED_EDGE('',*,*,#7285,.F.);\r
+-#7288=ORIENTED_EDGE('',*,*,#7287,.T.);\r
+-#7290=ORIENTED_EDGE('',*,*,#7289,.F.);\r
+-#7292=ORIENTED_EDGE('',*,*,#7291,.T.);\r
+-#7294=ORIENTED_EDGE('',*,*,#7293,.F.);\r
+-#7296=ORIENTED_EDGE('',*,*,#7295,.T.);\r
+-#7298=ORIENTED_EDGE('',*,*,#7297,.F.);\r
+-#7300=ORIENTED_EDGE('',*,*,#7299,.T.);\r
+-#7302=ORIENTED_EDGE('',*,*,#7301,.F.);\r
+-#7304=ORIENTED_EDGE('',*,*,#7303,.T.);\r
+-#7306=ORIENTED_EDGE('',*,*,#7305,.F.);\r
+-#7308=ORIENTED_EDGE('',*,*,#7307,.T.);\r
+-#7309=EDGE_LOOP('',(#7286,#7288,#7290,#7292,#7294,#7296,#7298,#7300,#7302,#7304,\r
+-#7306,#7308));\r
+-#7310=FACE_BOUND('',#7309,.F.);\r
+-#7311=ADVANCED_FACE('',(#7278,#7284,#7310),#7261,.T.);\r
+-#7312=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));\r
+-#7313=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7314=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7315=AXIS2_PLACEMENT_3D('',#7312,#7313,#7314);\r
+-#7316=CYLINDRICAL_SURFACE('',#7315,1.625E-1);\r
+-#7317=ORIENTED_EDGE('',*,*,#6031,.T.);\r
+-#7319=ORIENTED_EDGE('',*,*,#7318,.T.);\r
+-#7320=ORIENTED_EDGE('',*,*,#7279,.F.);\r
+-#7322=ORIENTED_EDGE('',*,*,#7321,.F.);\r
+-#7323=EDGE_LOOP('',(#7317,#7319,#7320,#7322));\r
+-#7324=FACE_OUTER_BOUND('',#7323,.F.);\r
+-#7325=ADVANCED_FACE('',(#7324),#7316,.F.);\r
+-#7326=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));\r
+-#7327=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7328=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7329=AXIS2_PLACEMENT_3D('',#7326,#7327,#7328);\r
+-#7330=CYLINDRICAL_SURFACE('',#7329,1.625E-1);\r
+-#7331=ORIENTED_EDGE('',*,*,#6033,.T.);\r
+-#7332=ORIENTED_EDGE('',*,*,#7321,.T.);\r
+-#7333=ORIENTED_EDGE('',*,*,#7281,.F.);\r
+-#7334=ORIENTED_EDGE('',*,*,#7318,.F.);\r
+-#7335=EDGE_LOOP('',(#7331,#7332,#7333,#7334));\r
+-#7336=FACE_OUTER_BOUND('',#7335,.F.);\r
+-#7337=ADVANCED_FACE('',(#7336),#7330,.F.);\r
+-#7338=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.2E1));\r
+-#7339=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7340=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7341=AXIS2_PLACEMENT_3D('',#7338,#7339,#7340);\r
+-#7342=PLANE('',#7341);\r
+-#7343=ORIENTED_EDGE('',*,*,#6314,.T.);\r
+-#7344=ORIENTED_EDGE('',*,*,#7262,.T.);\r
+-#7346=ORIENTED_EDGE('',*,*,#7345,.T.);\r
+-#7347=EDGE_LOOP('',(#7343,#7344,#7346));\r
+-#7348=FACE_OUTER_BOUND('',#7347,.F.);\r
+-#7349=ADVANCED_FACE('',(#7348),#7342,.F.);\r
+-#7350=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));\r
+-#7351=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));\r
+-#7352=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#7353=AXIS2_PLACEMENT_3D('',#7350,#7351,#7352);\r
+-#7354=PLANE('',#7353);\r
+-#7355=ORIENTED_EDGE('',*,*,#6316,.F.);\r
+-#7356=ORIENTED_EDGE('',*,*,#7345,.F.);\r
+-#7357=ORIENTED_EDGE('',*,*,#7275,.T.);\r
+-#7359=ORIENTED_EDGE('',*,*,#7358,.T.);\r
+-#7360=EDGE_LOOP('',(#7355,#7356,#7357,#7359));\r
+-#7361=FACE_OUTER_BOUND('',#7360,.F.);\r
+-#7363=ORIENTED_EDGE('',*,*,#7362,.T.);\r
+-#7365=ORIENTED_EDGE('',*,*,#7364,.T.);\r
+-#7366=EDGE_LOOP('',(#7363,#7365));\r
+-#7367=FACE_BOUND('',#7366,.F.);\r
+-#7368=ADVANCED_FACE('',(#7361,#7367),#7354,.T.);\r
+-#7369=CARTESIAN_POINT('',(2.E0,1.5E0,1.2E1));\r
+-#7370=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7371=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7372=AXIS2_PLACEMENT_3D('',#7369,#7370,#7371);\r
+-#7373=PLANE('',#7372);\r
+-#7374=ORIENTED_EDGE('',*,*,#6318,.F.);\r
+-#7375=ORIENTED_EDGE('',*,*,#7358,.F.);\r
+-#7376=ORIENTED_EDGE('',*,*,#7273,.F.);\r
+-#7377=EDGE_LOOP('',(#7374,#7375,#7376));\r
+-#7378=FACE_OUTER_BOUND('',#7377,.F.);\r
+-#7379=ADVANCED_FACE('',(#7378),#7373,.T.);\r
+-#7380=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));\r
+-#7381=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7382=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7383=AXIS2_PLACEMENT_3D('',#7380,#7381,#7382);\r
+-#7384=CYLINDRICAL_SURFACE('',#7383,2.575E-1);\r
+-#7386=ORIENTED_EDGE('',*,*,#7385,.F.);\r
+-#7387=ORIENTED_EDGE('',*,*,#7362,.F.);\r
+-#7389=ORIENTED_EDGE('',*,*,#7388,.F.);\r
+-#7391=ORIENTED_EDGE('',*,*,#7390,.F.);\r
+-#7392=EDGE_LOOP('',(#7386,#7387,#7389,#7391));\r
+-#7393=FACE_OUTER_BOUND('',#7392,.F.);\r
+-#7394=ADVANCED_FACE('',(#7393),#7384,.F.);\r
+-#7395=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));\r
+-#7396=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7397=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7398=AXIS2_PLACEMENT_3D('',#7395,#7396,#7397);\r
+-#7399=CYLINDRICAL_SURFACE('',#7398,2.575E-1);\r
+-#7400=ORIENTED_EDGE('',*,*,#7388,.T.);\r
+-#7401=ORIENTED_EDGE('',*,*,#7364,.F.);\r
+-#7402=ORIENTED_EDGE('',*,*,#7385,.T.);\r
+-#7404=ORIENTED_EDGE('',*,*,#7403,.F.);\r
+-#7405=EDGE_LOOP('',(#7400,#7401,#7402,#7404));\r
+-#7406=FACE_OUTER_BOUND('',#7405,.F.);\r
+-#7407=ADVANCED_FACE('',(#7406),#7399,.F.);\r
+-#7408=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));\r
+-#7409=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7410=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7411=AXIS2_PLACEMENT_3D('',#7408,#7409,#7410);\r
+-#7412=PLANE('',#7411);\r
+-#7413=ORIENTED_EDGE('',*,*,#7390,.T.);\r
+-#7414=ORIENTED_EDGE('',*,*,#7403,.T.);\r
+-#7415=EDGE_LOOP('',(#7413,#7414));\r
+-#7416=FACE_OUTER_BOUND('',#7415,.F.);\r
+-#7418=ORIENTED_EDGE('',*,*,#7417,.F.);\r
+-#7420=ORIENTED_EDGE('',*,*,#7419,.F.);\r
+-#7421=EDGE_LOOP('',(#7418,#7420));\r
+-#7422=FACE_BOUND('',#7421,.F.);\r
+-#7423=ADVANCED_FACE('',(#7416,#7422),#7412,.F.);\r
+-#7424=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));\r
+-#7425=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7426=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7427=AXIS2_PLACEMENT_3D('',#7424,#7425,#7426);\r
+-#7428=CYLINDRICAL_SURFACE('',#7427,1.925E-1);\r
+-#7429=ORIENTED_EDGE('',*,*,#7417,.T.);\r
+-#7431=ORIENTED_EDGE('',*,*,#7430,.T.);\r
+-#7432=ORIENTED_EDGE('',*,*,#5620,.F.);\r
+-#7434=ORIENTED_EDGE('',*,*,#7433,.F.);\r
+-#7435=EDGE_LOOP('',(#7429,#7431,#7432,#7434));\r
+-#7436=FACE_OUTER_BOUND('',#7435,.F.);\r
+-#7437=ADVANCED_FACE('',(#7436),#7428,.F.);\r
+-#7438=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));\r
+-#7439=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7440=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7441=AXIS2_PLACEMENT_3D('',#7438,#7439,#7440);\r
+-#7442=CYLINDRICAL_SURFACE('',#7441,1.925E-1);\r
+-#7443=ORIENTED_EDGE('',*,*,#7419,.T.);\r
+-#7444=ORIENTED_EDGE('',*,*,#7433,.T.);\r
+-#7445=ORIENTED_EDGE('',*,*,#5622,.F.);\r
+-#7446=ORIENTED_EDGE('',*,*,#7430,.F.);\r
+-#7447=EDGE_LOOP('',(#7443,#7444,#7445,#7446));\r
+-#7448=FACE_OUTER_BOUND('',#7447,.F.);\r
+-#7449=ADVANCED_FACE('',(#7448),#7442,.F.);\r
+-#7450=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));\r
+-#7451=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7452=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7453=AXIS2_PLACEMENT_3D('',#7450,#7451,#7452);\r
+-#7454=PLANE('',#7453);\r
+-#7455=ORIENTED_EDGE('',*,*,#7265,.T.);\r
+-#7456=ORIENTED_EDGE('',*,*,#6310,.T.);\r
+-#7458=ORIENTED_EDGE('',*,*,#7457,.F.);\r
+-#7459=ORIENTED_EDGE('',*,*,#5512,.F.);\r
+-#7460=ORIENTED_EDGE('',*,*,#5984,.T.);\r
+-#7462=ORIENTED_EDGE('',*,*,#7461,.T.);\r
+-#7463=EDGE_LOOP('',(#7455,#7456,#7458,#7459,#7460,#7462));\r
+-#7464=FACE_OUTER_BOUND('',#7463,.F.);\r
+-#7465=ADVANCED_FACE('',(#7464),#7454,.T.);\r
+-#7466=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));\r
+-#7467=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7468=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7469=AXIS2_PLACEMENT_3D('',#7466,#7467,#7468);\r
+-#7470=PLANE('',#7469);\r
+-#7471=ORIENTED_EDGE('',*,*,#6731,.F.);\r
+-#7472=ORIENTED_EDGE('',*,*,#5514,.T.);\r
+-#7473=ORIENTED_EDGE('',*,*,#7457,.T.);\r
+-#7474=ORIENTED_EDGE('',*,*,#6308,.F.);\r
+-#7475=EDGE_LOOP('',(#7471,#7472,#7473,#7474));\r
+-#7476=FACE_OUTER_BOUND('',#7475,.F.);\r
+-#7477=ADVANCED_FACE('',(#7476),#7470,.T.);\r
+-#7478=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));\r
+-#7479=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#7480=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#7481=AXIS2_PLACEMENT_3D('',#7478,#7479,#7480);\r
+-#7482=PLANE('',#7481);\r
+-#7483=ORIENTED_EDGE('',*,*,#5982,.F.);\r
+-#7485=ORIENTED_EDGE('',*,*,#7484,.T.);\r
+-#7486=ORIENTED_EDGE('',*,*,#7267,.T.);\r
+-#7487=ORIENTED_EDGE('',*,*,#7461,.F.);\r
+-#7488=EDGE_LOOP('',(#7483,#7485,#7486,#7487));\r
+-#7489=FACE_OUTER_BOUND('',#7488,.F.);\r
+-#7490=ADVANCED_FACE('',(#7489),#7482,.T.);\r
+-#7491=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));\r
+-#7492=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7493=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7494=AXIS2_PLACEMENT_3D('',#7491,#7492,#7493);\r
+-#7495=PLANE('',#7494);\r
+-#7496=ORIENTED_EDGE('',*,*,#5980,.F.);\r
+-#7497=ORIENTED_EDGE('',*,*,#7239,.T.);\r
+-#7498=ORIENTED_EDGE('',*,*,#7269,.T.);\r
+-#7499=ORIENTED_EDGE('',*,*,#7484,.F.);\r
+-#7500=EDGE_LOOP('',(#7496,#7497,#7498,#7499));\r
+-#7501=FACE_OUTER_BOUND('',#7500,.F.);\r
+-#7503=ORIENTED_EDGE('',*,*,#7502,.F.);\r
+-#7505=ORIENTED_EDGE('',*,*,#7504,.F.);\r
+-#7506=EDGE_LOOP('',(#7503,#7505));\r
+-#7507=FACE_BOUND('',#7506,.F.);\r
+-#7509=ORIENTED_EDGE('',*,*,#7508,.F.);\r
+-#7511=ORIENTED_EDGE('',*,*,#7510,.F.);\r
+-#7512=EDGE_LOOP('',(#7509,#7511));\r
+-#7513=FACE_BOUND('',#7512,.F.);\r
+-#7514=ADVANCED_FACE('',(#7501,#7507,#7513),#7495,.T.);\r
+-#7515=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));\r
+-#7516=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7517=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7518=AXIS2_PLACEMENT_3D('',#7515,#7516,#7517);\r
+-#7519=CYLINDRICAL_SURFACE('',#7518,9.5E-2);\r
+-#7520=ORIENTED_EDGE('',*,*,#7502,.T.);\r
+-#7522=ORIENTED_EDGE('',*,*,#7521,.T.);\r
+-#7524=ORIENTED_EDGE('',*,*,#7523,.F.);\r
+-#7526=ORIENTED_EDGE('',*,*,#7525,.F.);\r
+-#7527=EDGE_LOOP('',(#7520,#7522,#7524,#7526));\r
+-#7528=FACE_OUTER_BOUND('',#7527,.F.);\r
+-#7529=ADVANCED_FACE('',(#7528),#7519,.F.);\r
+-#7530=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));\r
+-#7531=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7532=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7533=AXIS2_PLACEMENT_3D('',#7530,#7531,#7532);\r
+-#7534=CYLINDRICAL_SURFACE('',#7533,9.5E-2);\r
+-#7535=ORIENTED_EDGE('',*,*,#7504,.T.);\r
+-#7536=ORIENTED_EDGE('',*,*,#7525,.T.);\r
+-#7538=ORIENTED_EDGE('',*,*,#7537,.F.);\r
+-#7539=ORIENTED_EDGE('',*,*,#7521,.F.);\r
+-#7540=EDGE_LOOP('',(#7535,#7536,#7538,#7539));\r
+-#7541=FACE_OUTER_BOUND('',#7540,.F.);\r
+-#7542=ADVANCED_FACE('',(#7541),#7534,.F.);\r
+-#7543=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));\r
+-#7544=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7545=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7546=AXIS2_PLACEMENT_3D('',#7543,#7544,#7545);\r
+-#7547=PLANE('',#7546);\r
+-#7548=ORIENTED_EDGE('',*,*,#7523,.T.);\r
+-#7549=ORIENTED_EDGE('',*,*,#7537,.T.);\r
+-#7550=EDGE_LOOP('',(#7548,#7549));\r
+-#7551=FACE_OUTER_BOUND('',#7550,.F.);\r
+-#7552=ADVANCED_FACE('',(#7551),#7547,.F.);\r
+-#7553=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));\r
+-#7554=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7555=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7556=AXIS2_PLACEMENT_3D('',#7553,#7554,#7555);\r
+-#7557=CYLINDRICAL_SURFACE('',#7556,6.25E-2);\r
+-#7558=ORIENTED_EDGE('',*,*,#7508,.T.);\r
+-#7560=ORIENTED_EDGE('',*,*,#7559,.T.);\r
+-#7562=ORIENTED_EDGE('',*,*,#7561,.F.);\r
+-#7564=ORIENTED_EDGE('',*,*,#7563,.F.);\r
+-#7565=EDGE_LOOP('',(#7558,#7560,#7562,#7564));\r
+-#7566=FACE_OUTER_BOUND('',#7565,.F.);\r
+-#7567=ADVANCED_FACE('',(#7566),#7557,.F.);\r
+-#7568=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));\r
+-#7569=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7570=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7571=AXIS2_PLACEMENT_3D('',#7568,#7569,#7570);\r
+-#7572=CYLINDRICAL_SURFACE('',#7571,6.25E-2);\r
+-#7573=ORIENTED_EDGE('',*,*,#7510,.T.);\r
+-#7574=ORIENTED_EDGE('',*,*,#7563,.T.);\r
+-#7576=ORIENTED_EDGE('',*,*,#7575,.F.);\r
+-#7577=ORIENTED_EDGE('',*,*,#7559,.F.);\r
+-#7578=EDGE_LOOP('',(#7573,#7574,#7576,#7577));\r
+-#7579=FACE_OUTER_BOUND('',#7578,.F.);\r
+-#7580=ADVANCED_FACE('',(#7579),#7572,.F.);\r
+-#7581=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));\r
+-#7582=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7583=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7584=AXIS2_PLACEMENT_3D('',#7581,#7582,#7583);\r
+-#7585=PLANE('',#7584);\r
+-#7586=ORIENTED_EDGE('',*,*,#7561,.T.);\r
+-#7587=ORIENTED_EDGE('',*,*,#7575,.T.);\r
+-#7588=EDGE_LOOP('',(#7586,#7587));\r
+-#7589=FACE_OUTER_BOUND('',#7588,.F.);\r
+-#7590=ADVANCED_FACE('',(#7589),#7585,.F.);\r
+-#7591=CARTESIAN_POINT('',(2.15E0,6.65E0,9.441108058217E0));\r
+-#7592=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7593=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7594=AXIS2_PLACEMENT_3D('',#7591,#7592,#7593);\r
+-#7595=CYLINDRICAL_SURFACE('',#7594,3.5E-1);\r
+-#7597=ORIENTED_EDGE('',*,*,#7596,.T.);\r
+-#7598=ORIENTED_EDGE('',*,*,#7285,.T.);\r
+-#7600=ORIENTED_EDGE('',*,*,#7599,.F.);\r
+-#7602=ORIENTED_EDGE('',*,*,#7601,.T.);\r
+-#7603=EDGE_LOOP('',(#7597,#7598,#7600,#7602));\r
+-#7604=FACE_OUTER_BOUND('',#7603,.F.);\r
+-#7605=ADVANCED_FACE('',(#7604),#7595,.T.);\r
+-#7606=CARTESIAN_POINT('',(2.5E0,7.E0,1.E1));\r
+-#7607=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7608=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7609=AXIS2_PLACEMENT_3D('',#7606,#7607,#7608);\r
+-#7610=PLANE('',#7609);\r
+-#7611=ORIENTED_EDGE('',*,*,#7596,.F.);\r
+-#7613=ORIENTED_EDGE('',*,*,#7612,.T.);\r
+-#7615=ORIENTED_EDGE('',*,*,#7614,.F.);\r
+-#7616=ORIENTED_EDGE('',*,*,#7287,.F.);\r
+-#7617=EDGE_LOOP('',(#7611,#7613,#7615,#7616));\r
+-#7618=FACE_OUTER_BOUND('',#7617,.F.);\r
+-#7619=ADVANCED_FACE('',(#7618),#7610,.F.);\r
+-#7620=CARTESIAN_POINT('',(0.E0,0.E0,9.5E0));\r
+-#7621=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#7622=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7623=AXIS2_PLACEMENT_3D('',#7620,#7621,#7622);\r
+-#7624=PLANE('',#7623);\r
+-#7625=ORIENTED_EDGE('',*,*,#7612,.F.);\r
+-#7626=ORIENTED_EDGE('',*,*,#7601,.F.);\r
+-#7628=ORIENTED_EDGE('',*,*,#7627,.F.);\r
+-#7630=ORIENTED_EDGE('',*,*,#7629,.F.);\r
+-#7632=ORIENTED_EDGE('',*,*,#7631,.F.);\r
+-#7634=ORIENTED_EDGE('',*,*,#7633,.F.);\r
+-#7636=ORIENTED_EDGE('',*,*,#7635,.F.);\r
+-#7638=ORIENTED_EDGE('',*,*,#7637,.F.);\r
+-#7640=ORIENTED_EDGE('',*,*,#7639,.F.);\r
+-#7642=ORIENTED_EDGE('',*,*,#7641,.F.);\r
+-#7644=ORIENTED_EDGE('',*,*,#7643,.F.);\r
+-#7646=ORIENTED_EDGE('',*,*,#7645,.F.);\r
+-#7647=EDGE_LOOP('',(#7625,#7626,#7628,#7630,#7632,#7634,#7636,#7638,#7640,#7642,\r
+-#7644,#7646));\r
+-#7648=FACE_OUTER_BOUND('',#7647,.F.);\r
+-#7649=ADVANCED_FACE('',(#7648),#7624,.T.);\r
+-#7650=CARTESIAN_POINT('',(1.357969178416E0,7.E0,1.E1));\r
+-#7651=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7652=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7653=AXIS2_PLACEMENT_3D('',#7650,#7651,#7652);\r
+-#7654=PLANE('',#7653);\r
+-#7655=ORIENTED_EDGE('',*,*,#7599,.T.);\r
+-#7656=ORIENTED_EDGE('',*,*,#7307,.F.);\r
+-#7658=ORIENTED_EDGE('',*,*,#7657,.T.);\r
+-#7659=ORIENTED_EDGE('',*,*,#7627,.T.);\r
+-#7660=EDGE_LOOP('',(#7655,#7656,#7658,#7659));\r
+-#7661=FACE_OUTER_BOUND('',#7660,.F.);\r
+-#7662=ADVANCED_FACE('',(#7661),#7654,.F.);\r
+-#7663=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,1.006892397423E1));\r
+-#7664=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7665=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7666=AXIS2_PLACEMENT_3D('',#7663,#7664,#7665);\r
+-#7667=CYLINDRICAL_SURFACE('',#7666,3.5E-1);\r
+-#7668=ORIENTED_EDGE('',*,*,#7657,.F.);\r
+-#7669=ORIENTED_EDGE('',*,*,#7305,.T.);\r
+-#7671=ORIENTED_EDGE('',*,*,#7670,.T.);\r
+-#7672=ORIENTED_EDGE('',*,*,#7629,.T.);\r
+-#7673=EDGE_LOOP('',(#7668,#7669,#7671,#7672));\r
+-#7674=FACE_OUTER_BOUND('',#7673,.F.);\r
+-#7675=ADVANCED_FACE('',(#7674),#7667,.F.);\r
+-#7676=CARTESIAN_POINT('',(2.746858067304E0,9.5E0,1.E1));\r
+-#7677=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#7678=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#7679=AXIS2_PLACEMENT_3D('',#7676,#7677,#7678);\r
+-#7680=PLANE('',#7679);\r
+-#7681=ORIENTED_EDGE('',*,*,#7670,.F.);\r
+-#7682=ORIENTED_EDGE('',*,*,#7303,.F.);\r
+-#7684=ORIENTED_EDGE('',*,*,#7683,.T.);\r
+-#7685=ORIENTED_EDGE('',*,*,#7631,.T.);\r
+-#7686=EDGE_LOOP('',(#7681,#7682,#7684,#7685));\r
+-#7687=FACE_OUTER_BOUND('',#7686,.F.);\r
+-#7688=ADVANCED_FACE('',(#7687),#7680,.F.);\r
+-#7689=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,1.006892397423E1));\r
+-#7690=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7691=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#7692=AXIS2_PLACEMENT_3D('',#7689,#7690,#7691);\r
+-#7693=CYLINDRICAL_SURFACE('',#7692,3.5E-1);\r
+-#7694=ORIENTED_EDGE('',*,*,#7683,.F.);\r
+-#7695=ORIENTED_EDGE('',*,*,#7301,.T.);\r
+-#7697=ORIENTED_EDGE('',*,*,#7696,.T.);\r
+-#7698=ORIENTED_EDGE('',*,*,#7633,.T.);\r
+-#7699=EDGE_LOOP('',(#7694,#7695,#7697,#7698));\r
+-#7700=FACE_OUTER_BOUND('',#7699,.F.);\r
+-#7701=ADVANCED_FACE('',(#7700),#7693,.F.);\r
+-#7702=CARTESIAN_POINT('',(4.5E0,9.5E0,1.E1));\r
+-#7703=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7704=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7705=AXIS2_PLACEMENT_3D('',#7702,#7703,#7704);\r
+-#7706=PLANE('',#7705);\r
+-#7707=ORIENTED_EDGE('',*,*,#7696,.F.);\r
+-#7708=ORIENTED_EDGE('',*,*,#7299,.F.);\r
+-#7710=ORIENTED_EDGE('',*,*,#7709,.T.);\r
+-#7711=ORIENTED_EDGE('',*,*,#7635,.T.);\r
+-#7712=EDGE_LOOP('',(#7707,#7708,#7710,#7711));\r
+-#7713=FACE_OUTER_BOUND('',#7712,.F.);\r
+-#7714=ADVANCED_FACE('',(#7713),#7706,.F.);\r
+-#7715=CARTESIAN_POINT('',(4.15E0,9.15E0,1.006892397423E1));\r
+-#7716=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7717=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7718=AXIS2_PLACEMENT_3D('',#7715,#7716,#7717);\r
+-#7719=CYLINDRICAL_SURFACE('',#7718,3.5E-1);\r
+-#7720=ORIENTED_EDGE('',*,*,#7709,.F.);\r
+-#7721=ORIENTED_EDGE('',*,*,#7297,.T.);\r
+-#7723=ORIENTED_EDGE('',*,*,#7722,.T.);\r
+-#7724=ORIENTED_EDGE('',*,*,#7637,.T.);\r
+-#7725=EDGE_LOOP('',(#7720,#7721,#7723,#7724));\r
+-#7726=FACE_OUTER_BOUND('',#7725,.F.);\r
+-#7727=ADVANCED_FACE('',(#7726),#7719,.F.);\r
+-#7728=CARTESIAN_POINT('',(4.5E0,2.E0,1.E1));\r
+-#7729=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7730=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7731=AXIS2_PLACEMENT_3D('',#7728,#7729,#7730);\r
+-#7732=PLANE('',#7731);\r
+-#7734=ORIENTED_EDGE('',*,*,#7733,.T.);\r
+-#7735=ORIENTED_EDGE('',*,*,#7639,.T.);\r
+-#7736=ORIENTED_EDGE('',*,*,#7722,.F.);\r
+-#7737=ORIENTED_EDGE('',*,*,#7295,.F.);\r
+-#7738=EDGE_LOOP('',(#7734,#7735,#7736,#7737));\r
+-#7739=FACE_OUTER_BOUND('',#7738,.F.);\r
+-#7740=ADVANCED_FACE('',(#7739),#7732,.F.);\r
+-#7741=CARTESIAN_POINT('',(4.15E0,2.35E0,1.006892397423E1));\r
+-#7742=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7743=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7744=AXIS2_PLACEMENT_3D('',#7741,#7742,#7743);\r
+-#7745=CYLINDRICAL_SURFACE('',#7744,3.5E-1);\r
+-#7746=ORIENTED_EDGE('',*,*,#7733,.F.);\r
+-#7747=ORIENTED_EDGE('',*,*,#7293,.T.);\r
+-#7749=ORIENTED_EDGE('',*,*,#7748,.T.);\r
+-#7750=ORIENTED_EDGE('',*,*,#7641,.T.);\r
+-#7751=EDGE_LOOP('',(#7746,#7747,#7749,#7750));\r
+-#7752=FACE_OUTER_BOUND('',#7751,.F.);\r
+-#7753=ADVANCED_FACE('',(#7752),#7745,.F.);\r
+-#7754=CARTESIAN_POINT('',(2.5E0,2.E0,1.E1));\r
+-#7755=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7756=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7757=AXIS2_PLACEMENT_3D('',#7754,#7755,#7756);\r
+-#7758=PLANE('',#7757);\r
+-#7760=ORIENTED_EDGE('',*,*,#7759,.T.);\r
+-#7761=ORIENTED_EDGE('',*,*,#7643,.T.);\r
+-#7762=ORIENTED_EDGE('',*,*,#7748,.F.);\r
+-#7763=ORIENTED_EDGE('',*,*,#7291,.F.);\r
+-#7764=EDGE_LOOP('',(#7760,#7761,#7762,#7763));\r
+-#7765=FACE_OUTER_BOUND('',#7764,.F.);\r
+-#7766=ADVANCED_FACE('',(#7765),#7758,.F.);\r
+-#7767=CARTESIAN_POINT('',(2.85E0,2.35E0,1.006892397423E1));\r
+-#7768=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#7769=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7770=AXIS2_PLACEMENT_3D('',#7767,#7768,#7769);\r
+-#7771=CYLINDRICAL_SURFACE('',#7770,3.5E-1);\r
+-#7772=ORIENTED_EDGE('',*,*,#7759,.F.);\r
+-#7773=ORIENTED_EDGE('',*,*,#7289,.T.);\r
+-#7774=ORIENTED_EDGE('',*,*,#7614,.T.);\r
+-#7775=ORIENTED_EDGE('',*,*,#7645,.T.);\r
+-#7776=EDGE_LOOP('',(#7772,#7773,#7774,#7775));\r
+-#7777=FACE_OUTER_BOUND('',#7776,.F.);\r
+-#7778=ADVANCED_FACE('',(#7777),#7771,.F.);\r
+-#7779=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));\r
+-#7780=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#7781=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7782=AXIS2_PLACEMENT_3D('',#7779,#7780,#7781);\r
+-#7783=PLANE('',#7782);\r
+-#7784=ORIENTED_EDGE('',*,*,#7161,.F.);\r
+-#7785=ORIENTED_EDGE('',*,*,#6428,.T.);\r
+-#7786=ORIENTED_EDGE('',*,*,#6953,.T.);\r
+-#7787=ORIENTED_EDGE('',*,*,#5682,.F.);\r
+-#7788=EDGE_LOOP('',(#7784,#7785,#7786,#7787));\r
+-#7789=FACE_OUTER_BOUND('',#7788,.F.);\r
+-#7790=ADVANCED_FACE('',(#7789),#7783,.T.);\r
+-#7791=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));\r
+-#7792=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7793=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7794=AXIS2_PLACEMENT_3D('',#7791,#7792,#7793);\r
+-#7795=CYLINDRICAL_SURFACE('',#7794,9.5E-2);\r
+-#7796=ORIENTED_EDGE('',*,*,#7140,.F.);\r
+-#7798=ORIENTED_EDGE('',*,*,#7797,.T.);\r
+-#7800=ORIENTED_EDGE('',*,*,#7799,.T.);\r
+-#7802=ORIENTED_EDGE('',*,*,#7801,.F.);\r
+-#7803=EDGE_LOOP('',(#7796,#7798,#7800,#7802));\r
+-#7804=FACE_OUTER_BOUND('',#7803,.F.);\r
+-#7805=ADVANCED_FACE('',(#7804),#7795,.F.);\r
+-#7806=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));\r
+-#7807=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7808=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7809=AXIS2_PLACEMENT_3D('',#7806,#7807,#7808);\r
+-#7810=CYLINDRICAL_SURFACE('',#7809,9.5E-2);\r
+-#7811=ORIENTED_EDGE('',*,*,#7142,.F.);\r
+-#7812=ORIENTED_EDGE('',*,*,#7801,.T.);\r
+-#7814=ORIENTED_EDGE('',*,*,#7813,.T.);\r
+-#7815=ORIENTED_EDGE('',*,*,#7797,.F.);\r
+-#7816=EDGE_LOOP('',(#7811,#7812,#7814,#7815));\r
+-#7817=FACE_OUTER_BOUND('',#7816,.F.);\r
+-#7818=ADVANCED_FACE('',(#7817),#7810,.F.);\r
+-#7819=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));\r
+-#7820=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7821=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7822=AXIS2_PLACEMENT_3D('',#7819,#7820,#7821);\r
+-#7823=PLANE('',#7822);\r
+-#7824=ORIENTED_EDGE('',*,*,#7799,.F.);\r
+-#7825=ORIENTED_EDGE('',*,*,#7813,.F.);\r
+-#7826=EDGE_LOOP('',(#7824,#7825));\r
+-#7827=FACE_OUTER_BOUND('',#7826,.F.);\r
+-#7828=ADVANCED_FACE('',(#7827),#7823,.T.);\r
+-#7829=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));\r
+-#7830=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7831=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7832=AXIS2_PLACEMENT_3D('',#7829,#7830,#7831);\r
+-#7833=CYLINDRICAL_SURFACE('',#7832,6.25E-2);\r
+-#7834=ORIENTED_EDGE('',*,*,#7146,.F.);\r
+-#7836=ORIENTED_EDGE('',*,*,#7835,.T.);\r
+-#7838=ORIENTED_EDGE('',*,*,#7837,.T.);\r
+-#7840=ORIENTED_EDGE('',*,*,#7839,.F.);\r
+-#7841=EDGE_LOOP('',(#7834,#7836,#7838,#7840));\r
+-#7842=FACE_OUTER_BOUND('',#7841,.F.);\r
+-#7843=ADVANCED_FACE('',(#7842),#7833,.F.);\r
+-#7844=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));\r
+-#7845=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7846=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7847=AXIS2_PLACEMENT_3D('',#7844,#7845,#7846);\r
+-#7848=CYLINDRICAL_SURFACE('',#7847,6.25E-2);\r
+-#7849=ORIENTED_EDGE('',*,*,#7148,.F.);\r
+-#7850=ORIENTED_EDGE('',*,*,#7839,.T.);\r
+-#7852=ORIENTED_EDGE('',*,*,#7851,.T.);\r
+-#7853=ORIENTED_EDGE('',*,*,#7835,.F.);\r
+-#7854=EDGE_LOOP('',(#7849,#7850,#7852,#7853));\r
+-#7855=FACE_OUTER_BOUND('',#7854,.F.);\r
+-#7856=ADVANCED_FACE('',(#7855),#7848,.F.);\r
+-#7857=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));\r
+-#7858=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7859=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7860=AXIS2_PLACEMENT_3D('',#7857,#7858,#7859);\r
+-#7861=PLANE('',#7860);\r
+-#7862=ORIENTED_EDGE('',*,*,#7837,.F.);\r
+-#7863=ORIENTED_EDGE('',*,*,#7851,.F.);\r
+-#7864=EDGE_LOOP('',(#7862,#7863));\r
+-#7865=FACE_OUTER_BOUND('',#7864,.F.);\r
+-#7866=ADVANCED_FACE('',(#7865),#7861,.T.);\r
+-#7867=CARTESIAN_POINT('',(1.755E1,1.176878221735E0,2.975E1));\r
+-#7868=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7869=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7870=AXIS2_PLACEMENT_3D('',#7867,#7868,#7869);\r
+-#7871=CYLINDRICAL_SURFACE('',#7870,1.E-1);\r
+-#7872=ORIENTED_EDGE('',*,*,#6346,.F.);\r
+-#7874=ORIENTED_EDGE('',*,*,#7873,.F.);\r
+-#7876=ORIENTED_EDGE('',*,*,#7875,.T.);\r
+-#7878=ORIENTED_EDGE('',*,*,#7877,.T.);\r
+-#7879=EDGE_LOOP('',(#7872,#7874,#7876,#7878));\r
+-#7880=FACE_OUTER_BOUND('',#7879,.F.);\r
+-#7881=ADVANCED_FACE('',(#7880),#7871,.F.);\r
+-#7882=CARTESIAN_POINT('',(1.755E1,1.176878221735E0,2.975E1));\r
+-#7883=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7884=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7885=AXIS2_PLACEMENT_3D('',#7882,#7883,#7884);\r
+-#7886=CYLINDRICAL_SURFACE('',#7885,1.E-1);\r
+-#7887=ORIENTED_EDGE('',*,*,#6348,.F.);\r
+-#7888=ORIENTED_EDGE('',*,*,#7877,.F.);\r
+-#7890=ORIENTED_EDGE('',*,*,#7889,.F.);\r
+-#7891=ORIENTED_EDGE('',*,*,#7873,.T.);\r
+-#7892=EDGE_LOOP('',(#7887,#7888,#7890,#7891));\r
+-#7893=FACE_OUTER_BOUND('',#7892,.F.);\r
+-#7894=ADVANCED_FACE('',(#7893),#7886,.F.);\r
+-#7895=CARTESIAN_POINT('',(1.755E1,1.234346967234E0,2.975E1));\r
+-#7896=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7897=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7898=AXIS2_PLACEMENT_3D('',#7895,#7896,#7897);\r
+-#7899=CONICAL_SURFACE('',#7898,7.288815195685E-2,6.E1);\r
+-#7901=ORIENTED_EDGE('',*,*,#7900,.F.);\r
+-#7903=ORIENTED_EDGE('',*,*,#7902,.T.);\r
+-#7904=ORIENTED_EDGE('',*,*,#7889,.T.);\r
+-#7905=EDGE_LOOP('',(#7901,#7903,#7904));\r
+-#7906=FACE_OUTER_BOUND('',#7905,.F.);\r
+-#7907=ADVANCED_FACE('',(#7906),#7899,.F.);\r
+-#7908=CARTESIAN_POINT('',(1.755E1,1.234346967234E0,2.975E1));\r
+-#7909=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7910=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7911=AXIS2_PLACEMENT_3D('',#7908,#7909,#7910);\r
+-#7912=CONICAL_SURFACE('',#7911,7.288815195685E-2,6.E1);\r
+-#7913=ORIENTED_EDGE('',*,*,#7900,.T.);\r
+-#7914=ORIENTED_EDGE('',*,*,#7875,.F.);\r
+-#7915=ORIENTED_EDGE('',*,*,#7902,.F.);\r
+-#7916=EDGE_LOOP('',(#7913,#7914,#7915));\r
+-#7917=FACE_OUTER_BOUND('',#7916,.F.);\r
+-#7918=ADVANCED_FACE('',(#7917),#7912,.F.);\r
+-#7919=CARTESIAN_POINT('',(1.655E1,1.176878221735E0,2.975E1));\r
+-#7920=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7921=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7922=AXIS2_PLACEMENT_3D('',#7919,#7920,#7921);\r
+-#7923=CYLINDRICAL_SURFACE('',#7922,1.E-1);\r
+-#7924=ORIENTED_EDGE('',*,*,#6352,.F.);\r
+-#7926=ORIENTED_EDGE('',*,*,#7925,.F.);\r
+-#7928=ORIENTED_EDGE('',*,*,#7927,.T.);\r
+-#7930=ORIENTED_EDGE('',*,*,#7929,.T.);\r
+-#7931=EDGE_LOOP('',(#7924,#7926,#7928,#7930));\r
+-#7932=FACE_OUTER_BOUND('',#7931,.F.);\r
+-#7933=ADVANCED_FACE('',(#7932),#7923,.F.);\r
+-#7934=CARTESIAN_POINT('',(1.655E1,1.176878221735E0,2.975E1));\r
+-#7935=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7936=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7937=AXIS2_PLACEMENT_3D('',#7934,#7935,#7936);\r
+-#7938=CYLINDRICAL_SURFACE('',#7937,1.E-1);\r
+-#7939=ORIENTED_EDGE('',*,*,#6354,.F.);\r
+-#7940=ORIENTED_EDGE('',*,*,#7929,.F.);\r
+-#7942=ORIENTED_EDGE('',*,*,#7941,.F.);\r
+-#7943=ORIENTED_EDGE('',*,*,#7925,.T.);\r
+-#7944=EDGE_LOOP('',(#7939,#7940,#7942,#7943));\r
+-#7945=FACE_OUTER_BOUND('',#7944,.F.);\r
+-#7946=ADVANCED_FACE('',(#7945),#7938,.F.);\r
+-#7947=CARTESIAN_POINT('',(1.655E1,1.234346967234E0,2.975E1));\r
+-#7948=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7949=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7950=AXIS2_PLACEMENT_3D('',#7947,#7948,#7949);\r
+-#7951=CONICAL_SURFACE('',#7950,7.288815195685E-2,6.E1);\r
+-#7953=ORIENTED_EDGE('',*,*,#7952,.F.);\r
+-#7955=ORIENTED_EDGE('',*,*,#7954,.T.);\r
+-#7956=ORIENTED_EDGE('',*,*,#7941,.T.);\r
+-#7957=EDGE_LOOP('',(#7953,#7955,#7956));\r
+-#7958=FACE_OUTER_BOUND('',#7957,.F.);\r
+-#7959=ADVANCED_FACE('',(#7958),#7951,.F.);\r
+-#7960=CARTESIAN_POINT('',(1.655E1,1.234346967234E0,2.975E1));\r
+-#7961=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#7962=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#7963=AXIS2_PLACEMENT_3D('',#7960,#7961,#7962);\r
+-#7964=CONICAL_SURFACE('',#7963,7.288815195685E-2,6.E1);\r
+-#7965=ORIENTED_EDGE('',*,*,#7952,.T.);\r
+-#7966=ORIENTED_EDGE('',*,*,#7927,.F.);\r
+-#7967=ORIENTED_EDGE('',*,*,#7954,.F.);\r
+-#7968=EDGE_LOOP('',(#7965,#7966,#7967));\r
+-#7969=FACE_OUTER_BOUND('',#7968,.F.);\r
+-#7970=ADVANCED_FACE('',(#7969),#7964,.F.);\r
+-#7971=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#7972=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7973=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7974=AXIS2_PLACEMENT_3D('',#7971,#7972,#7973);\r
+-#7975=CYLINDRICAL_SURFACE('',#7974,2.575E-1);\r
+-#7976=ORIENTED_EDGE('',*,*,#6248,.T.);\r
+-#7978=ORIENTED_EDGE('',*,*,#7977,.T.);\r
+-#7980=ORIENTED_EDGE('',*,*,#7979,.F.);\r
+-#7982=ORIENTED_EDGE('',*,*,#7981,.F.);\r
+-#7983=EDGE_LOOP('',(#7976,#7978,#7980,#7982));\r
+-#7984=FACE_OUTER_BOUND('',#7983,.F.);\r
+-#7985=ADVANCED_FACE('',(#7984),#7975,.F.);\r
+-#7986=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#7987=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#7988=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#7989=AXIS2_PLACEMENT_3D('',#7986,#7987,#7988);\r
+-#7990=CYLINDRICAL_SURFACE('',#7989,2.575E-1);\r
+-#7991=ORIENTED_EDGE('',*,*,#6250,.T.);\r
+-#7992=ORIENTED_EDGE('',*,*,#7981,.T.);\r
+-#7994=ORIENTED_EDGE('',*,*,#7993,.F.);\r
+-#7995=ORIENTED_EDGE('',*,*,#7977,.F.);\r
+-#7996=EDGE_LOOP('',(#7991,#7992,#7994,#7995));\r
+-#7997=FACE_OUTER_BOUND('',#7996,.F.);\r
+-#7998=ADVANCED_FACE('',(#7997),#7990,.F.);\r
+-#7999=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));\r
+-#8000=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8001=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8002=AXIS2_PLACEMENT_3D('',#7999,#8000,#8001);\r
+-#8003=PLANE('',#8002);\r
+-#8004=ORIENTED_EDGE('',*,*,#7979,.T.);\r
+-#8005=ORIENTED_EDGE('',*,*,#7993,.T.);\r
+-#8006=EDGE_LOOP('',(#8004,#8005));\r
+-#8007=FACE_OUTER_BOUND('',#8006,.F.);\r
+-#8009=ORIENTED_EDGE('',*,*,#8008,.F.);\r
+-#8011=ORIENTED_EDGE('',*,*,#8010,.F.);\r
+-#8012=EDGE_LOOP('',(#8009,#8011));\r
+-#8013=FACE_BOUND('',#8012,.F.);\r
+-#8014=ADVANCED_FACE('',(#8007,#8013),#8003,.F.);\r
+-#8015=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#8016=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8017=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8018=AXIS2_PLACEMENT_3D('',#8015,#8016,#8017);\r
+-#8019=CYLINDRICAL_SURFACE('',#8018,1.925E-1);\r
+-#8020=ORIENTED_EDGE('',*,*,#8008,.T.);\r
+-#8022=ORIENTED_EDGE('',*,*,#8021,.T.);\r
+-#8023=ORIENTED_EDGE('',*,*,#5626,.F.);\r
+-#8025=ORIENTED_EDGE('',*,*,#8024,.F.);\r
+-#8026=EDGE_LOOP('',(#8020,#8022,#8023,#8025));\r
+-#8027=FACE_OUTER_BOUND('',#8026,.F.);\r
+-#8028=ADVANCED_FACE('',(#8027),#8019,.F.);\r
+-#8029=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));\r
+-#8030=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8031=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8032=AXIS2_PLACEMENT_3D('',#8029,#8030,#8031);\r
+-#8033=CYLINDRICAL_SURFACE('',#8032,1.925E-1);\r
+-#8034=ORIENTED_EDGE('',*,*,#8010,.T.);\r
+-#8035=ORIENTED_EDGE('',*,*,#8024,.T.);\r
+-#8036=ORIENTED_EDGE('',*,*,#5628,.F.);\r
+-#8037=ORIENTED_EDGE('',*,*,#8021,.F.);\r
+-#8038=EDGE_LOOP('',(#8034,#8035,#8036,#8037));\r
+-#8039=FACE_OUTER_BOUND('',#8038,.F.);\r
+-#8040=ADVANCED_FACE('',(#8039),#8033,.F.);\r
+-#8041=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#8042=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8043=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8044=AXIS2_PLACEMENT_3D('',#8041,#8042,#8043);\r
+-#8045=CYLINDRICAL_SURFACE('',#8044,2.575E-1);\r
+-#8046=ORIENTED_EDGE('',*,*,#6358,.T.);\r
+-#8048=ORIENTED_EDGE('',*,*,#8047,.T.);\r
+-#8050=ORIENTED_EDGE('',*,*,#8049,.F.);\r
+-#8052=ORIENTED_EDGE('',*,*,#8051,.F.);\r
+-#8053=EDGE_LOOP('',(#8046,#8048,#8050,#8052));\r
+-#8054=FACE_OUTER_BOUND('',#8053,.F.);\r
+-#8055=ADVANCED_FACE('',(#8054),#8045,.F.);\r
+-#8056=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#8057=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8058=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8059=AXIS2_PLACEMENT_3D('',#8056,#8057,#8058);\r
+-#8060=CYLINDRICAL_SURFACE('',#8059,2.575E-1);\r
+-#8061=ORIENTED_EDGE('',*,*,#6360,.T.);\r
+-#8062=ORIENTED_EDGE('',*,*,#8051,.T.);\r
+-#8064=ORIENTED_EDGE('',*,*,#8063,.F.);\r
+-#8065=ORIENTED_EDGE('',*,*,#8047,.F.);\r
+-#8066=EDGE_LOOP('',(#8061,#8062,#8064,#8065));\r
+-#8067=FACE_OUTER_BOUND('',#8066,.F.);\r
+-#8068=ADVANCED_FACE('',(#8067),#8060,.F.);\r
+-#8069=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));\r
+-#8070=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8071=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8072=AXIS2_PLACEMENT_3D('',#8069,#8070,#8071);\r
+-#8073=PLANE('',#8072);\r
+-#8074=ORIENTED_EDGE('',*,*,#8049,.T.);\r
+-#8075=ORIENTED_EDGE('',*,*,#8063,.T.);\r
+-#8076=EDGE_LOOP('',(#8074,#8075));\r
+-#8077=FACE_OUTER_BOUND('',#8076,.F.);\r
+-#8079=ORIENTED_EDGE('',*,*,#8078,.F.);\r
+-#8081=ORIENTED_EDGE('',*,*,#8080,.F.);\r
+-#8082=EDGE_LOOP('',(#8079,#8081));\r
+-#8083=FACE_BOUND('',#8082,.F.);\r
+-#8084=ADVANCED_FACE('',(#8077,#8083),#8073,.F.);\r
+-#8085=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#8086=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8087=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8088=AXIS2_PLACEMENT_3D('',#8085,#8086,#8087);\r
+-#8089=CYLINDRICAL_SURFACE('',#8088,1.925E-1);\r
+-#8090=ORIENTED_EDGE('',*,*,#8078,.T.);\r
+-#8092=ORIENTED_EDGE('',*,*,#8091,.T.);\r
+-#8093=ORIENTED_EDGE('',*,*,#5614,.F.);\r
+-#8095=ORIENTED_EDGE('',*,*,#8094,.F.);\r
+-#8096=EDGE_LOOP('',(#8090,#8092,#8093,#8095));\r
+-#8097=FACE_OUTER_BOUND('',#8096,.F.);\r
+-#8098=ADVANCED_FACE('',(#8097),#8089,.F.);\r
+-#8099=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));\r
+-#8100=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8101=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8102=AXIS2_PLACEMENT_3D('',#8099,#8100,#8101);\r
+-#8103=CYLINDRICAL_SURFACE('',#8102,1.925E-1);\r
+-#8104=ORIENTED_EDGE('',*,*,#8080,.T.);\r
+-#8105=ORIENTED_EDGE('',*,*,#8094,.T.);\r
+-#8106=ORIENTED_EDGE('',*,*,#5616,.F.);\r
+-#8107=ORIENTED_EDGE('',*,*,#8091,.F.);\r
+-#8108=EDGE_LOOP('',(#8104,#8105,#8106,#8107));\r
+-#8109=FACE_OUTER_BOUND('',#8108,.F.);\r
+-#8110=ADVANCED_FACE('',(#8109),#8103,.F.);\r
+-#8111=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#8112=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8113=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8114=AXIS2_PLACEMENT_3D('',#8111,#8112,#8113);\r
+-#8115=CYLINDRICAL_SURFACE('',#8114,2.575E-1);\r
+-#8116=ORIENTED_EDGE('',*,*,#6364,.T.);\r
+-#8118=ORIENTED_EDGE('',*,*,#8117,.T.);\r
+-#8120=ORIENTED_EDGE('',*,*,#8119,.F.);\r
+-#8122=ORIENTED_EDGE('',*,*,#8121,.F.);\r
+-#8123=EDGE_LOOP('',(#8116,#8118,#8120,#8122));\r
+-#8124=FACE_OUTER_BOUND('',#8123,.F.);\r
+-#8125=ADVANCED_FACE('',(#8124),#8115,.F.);\r
+-#8126=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#8127=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8128=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8129=AXIS2_PLACEMENT_3D('',#8126,#8127,#8128);\r
+-#8130=CYLINDRICAL_SURFACE('',#8129,2.575E-1);\r
+-#8131=ORIENTED_EDGE('',*,*,#6366,.T.);\r
+-#8132=ORIENTED_EDGE('',*,*,#8121,.T.);\r
+-#8134=ORIENTED_EDGE('',*,*,#8133,.F.);\r
+-#8135=ORIENTED_EDGE('',*,*,#8117,.F.);\r
+-#8136=EDGE_LOOP('',(#8131,#8132,#8134,#8135));\r
+-#8137=FACE_OUTER_BOUND('',#8136,.F.);\r
+-#8138=ADVANCED_FACE('',(#8137),#8130,.F.);\r
+-#8139=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));\r
+-#8140=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8141=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8142=AXIS2_PLACEMENT_3D('',#8139,#8140,#8141);\r
+-#8143=PLANE('',#8142);\r
+-#8144=ORIENTED_EDGE('',*,*,#8119,.T.);\r
+-#8145=ORIENTED_EDGE('',*,*,#8133,.T.);\r
+-#8146=EDGE_LOOP('',(#8144,#8145));\r
+-#8147=FACE_OUTER_BOUND('',#8146,.F.);\r
+-#8149=ORIENTED_EDGE('',*,*,#8148,.F.);\r
+-#8151=ORIENTED_EDGE('',*,*,#8150,.F.);\r
+-#8152=EDGE_LOOP('',(#8149,#8151));\r
+-#8153=FACE_BOUND('',#8152,.F.);\r
+-#8154=ADVANCED_FACE('',(#8147,#8153),#8143,.F.);\r
+-#8155=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#8156=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8157=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8158=AXIS2_PLACEMENT_3D('',#8155,#8156,#8157);\r
+-#8159=CYLINDRICAL_SURFACE('',#8158,1.925E-1);\r
+-#8160=ORIENTED_EDGE('',*,*,#8148,.T.);\r
+-#8162=ORIENTED_EDGE('',*,*,#8161,.T.);\r
+-#8163=ORIENTED_EDGE('',*,*,#5608,.F.);\r
+-#8165=ORIENTED_EDGE('',*,*,#8164,.F.);\r
+-#8166=EDGE_LOOP('',(#8160,#8162,#8163,#8165));\r
+-#8167=FACE_OUTER_BOUND('',#8166,.F.);\r
+-#8168=ADVANCED_FACE('',(#8167),#8159,.F.);\r
+-#8169=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));\r
+-#8170=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8171=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8172=AXIS2_PLACEMENT_3D('',#8169,#8170,#8171);\r
+-#8173=CYLINDRICAL_SURFACE('',#8172,1.925E-1);\r
+-#8174=ORIENTED_EDGE('',*,*,#8150,.T.);\r
+-#8175=ORIENTED_EDGE('',*,*,#8164,.T.);\r
+-#8176=ORIENTED_EDGE('',*,*,#5610,.F.);\r
+-#8177=ORIENTED_EDGE('',*,*,#8161,.F.);\r
+-#8178=EDGE_LOOP('',(#8174,#8175,#8176,#8177));\r
+-#8179=FACE_OUTER_BOUND('',#8178,.F.);\r
+-#8180=ADVANCED_FACE('',(#8179),#8173,.F.);\r
+-#8181=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#8182=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8183=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8184=AXIS2_PLACEMENT_3D('',#8181,#8182,#8183);\r
+-#8185=CYLINDRICAL_SURFACE('',#8184,2.575E-1);\r
+-#8186=ORIENTED_EDGE('',*,*,#6254,.T.);\r
+-#8188=ORIENTED_EDGE('',*,*,#8187,.T.);\r
+-#8190=ORIENTED_EDGE('',*,*,#8189,.F.);\r
+-#8192=ORIENTED_EDGE('',*,*,#8191,.F.);\r
+-#8193=EDGE_LOOP('',(#8186,#8188,#8190,#8192));\r
+-#8194=FACE_OUTER_BOUND('',#8193,.F.);\r
+-#8195=ADVANCED_FACE('',(#8194),#8185,.F.);\r
+-#8196=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#8197=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8198=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8199=AXIS2_PLACEMENT_3D('',#8196,#8197,#8198);\r
+-#8200=CYLINDRICAL_SURFACE('',#8199,2.575E-1);\r
+-#8201=ORIENTED_EDGE('',*,*,#6256,.T.);\r
+-#8202=ORIENTED_EDGE('',*,*,#8191,.T.);\r
+-#8204=ORIENTED_EDGE('',*,*,#8203,.F.);\r
+-#8205=ORIENTED_EDGE('',*,*,#8187,.F.);\r
+-#8206=EDGE_LOOP('',(#8201,#8202,#8204,#8205));\r
+-#8207=FACE_OUTER_BOUND('',#8206,.F.);\r
+-#8208=ADVANCED_FACE('',(#8207),#8200,.F.);\r
+-#8209=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));\r
+-#8210=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8211=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8212=AXIS2_PLACEMENT_3D('',#8209,#8210,#8211);\r
+-#8213=PLANE('',#8212);\r
+-#8214=ORIENTED_EDGE('',*,*,#8189,.T.);\r
+-#8215=ORIENTED_EDGE('',*,*,#8203,.T.);\r
+-#8216=EDGE_LOOP('',(#8214,#8215));\r
+-#8217=FACE_OUTER_BOUND('',#8216,.F.);\r
+-#8219=ORIENTED_EDGE('',*,*,#8218,.F.);\r
+-#8221=ORIENTED_EDGE('',*,*,#8220,.F.);\r
+-#8222=EDGE_LOOP('',(#8219,#8221));\r
+-#8223=FACE_BOUND('',#8222,.F.);\r
+-#8224=ADVANCED_FACE('',(#8217,#8223),#8213,.F.);\r
+-#8225=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#8226=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8227=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8228=AXIS2_PLACEMENT_3D('',#8225,#8226,#8227);\r
+-#8229=CYLINDRICAL_SURFACE('',#8228,1.925E-1);\r
+-#8230=ORIENTED_EDGE('',*,*,#8218,.T.);\r
+-#8232=ORIENTED_EDGE('',*,*,#8231,.T.);\r
+-#8233=ORIENTED_EDGE('',*,*,#5602,.F.);\r
+-#8235=ORIENTED_EDGE('',*,*,#8234,.F.);\r
+-#8236=EDGE_LOOP('',(#8230,#8232,#8233,#8235));\r
+-#8237=FACE_OUTER_BOUND('',#8236,.F.);\r
+-#8238=ADVANCED_FACE('',(#8237),#8229,.F.);\r
+-#8239=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));\r
+-#8240=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8241=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8242=AXIS2_PLACEMENT_3D('',#8239,#8240,#8241);\r
+-#8243=CYLINDRICAL_SURFACE('',#8242,1.925E-1);\r
+-#8244=ORIENTED_EDGE('',*,*,#8220,.T.);\r
+-#8245=ORIENTED_EDGE('',*,*,#8234,.T.);\r
+-#8246=ORIENTED_EDGE('',*,*,#5604,.F.);\r
+-#8247=ORIENTED_EDGE('',*,*,#8231,.F.);\r
+-#8248=EDGE_LOOP('',(#8244,#8245,#8246,#8247));\r
+-#8249=FACE_OUTER_BOUND('',#8248,.F.);\r
+-#8250=ADVANCED_FACE('',(#8249),#8243,.F.);\r
+-#8251=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#8252=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8253=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8254=AXIS2_PLACEMENT_3D('',#8251,#8252,#8253);\r
+-#8255=CYLINDRICAL_SURFACE('',#8254,2.575E-1);\r
+-#8256=ORIENTED_EDGE('',*,*,#6370,.T.);\r
+-#8258=ORIENTED_EDGE('',*,*,#8257,.T.);\r
+-#8260=ORIENTED_EDGE('',*,*,#8259,.F.);\r
+-#8262=ORIENTED_EDGE('',*,*,#8261,.F.);\r
+-#8263=EDGE_LOOP('',(#8256,#8258,#8260,#8262));\r
+-#8264=FACE_OUTER_BOUND('',#8263,.F.);\r
+-#8265=ADVANCED_FACE('',(#8264),#8255,.F.);\r
+-#8266=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#8267=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8268=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8269=AXIS2_PLACEMENT_3D('',#8266,#8267,#8268);\r
+-#8270=CYLINDRICAL_SURFACE('',#8269,2.575E-1);\r
+-#8271=ORIENTED_EDGE('',*,*,#6372,.T.);\r
+-#8272=ORIENTED_EDGE('',*,*,#8261,.T.);\r
+-#8274=ORIENTED_EDGE('',*,*,#8273,.F.);\r
+-#8275=ORIENTED_EDGE('',*,*,#8257,.F.);\r
+-#8276=EDGE_LOOP('',(#8271,#8272,#8274,#8275));\r
+-#8277=FACE_OUTER_BOUND('',#8276,.F.);\r
+-#8278=ADVANCED_FACE('',(#8277),#8270,.F.);\r
+-#8279=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));\r
+-#8280=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8281=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8282=AXIS2_PLACEMENT_3D('',#8279,#8280,#8281);\r
+-#8283=PLANE('',#8282);\r
+-#8284=ORIENTED_EDGE('',*,*,#8259,.T.);\r
+-#8285=ORIENTED_EDGE('',*,*,#8273,.T.);\r
+-#8286=EDGE_LOOP('',(#8284,#8285));\r
+-#8287=FACE_OUTER_BOUND('',#8286,.F.);\r
+-#8289=ORIENTED_EDGE('',*,*,#8288,.F.);\r
+-#8291=ORIENTED_EDGE('',*,*,#8290,.F.);\r
+-#8292=EDGE_LOOP('',(#8289,#8291));\r
+-#8293=FACE_BOUND('',#8292,.F.);\r
+-#8294=ADVANCED_FACE('',(#8287,#8293),#8283,.F.);\r
+-#8295=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#8296=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8297=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8298=AXIS2_PLACEMENT_3D('',#8295,#8296,#8297);\r
+-#8299=CYLINDRICAL_SURFACE('',#8298,1.925E-1);\r
+-#8300=ORIENTED_EDGE('',*,*,#8288,.T.);\r
+-#8302=ORIENTED_EDGE('',*,*,#8301,.T.);\r
+-#8303=ORIENTED_EDGE('',*,*,#5590,.F.);\r
+-#8305=ORIENTED_EDGE('',*,*,#8304,.F.);\r
+-#8306=EDGE_LOOP('',(#8300,#8302,#8303,#8305));\r
+-#8307=FACE_OUTER_BOUND('',#8306,.F.);\r
+-#8308=ADVANCED_FACE('',(#8307),#8299,.F.);\r
+-#8309=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));\r
+-#8310=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8311=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8312=AXIS2_PLACEMENT_3D('',#8309,#8310,#8311);\r
+-#8313=CYLINDRICAL_SURFACE('',#8312,1.925E-1);\r
+-#8314=ORIENTED_EDGE('',*,*,#8290,.T.);\r
+-#8315=ORIENTED_EDGE('',*,*,#8304,.T.);\r
+-#8316=ORIENTED_EDGE('',*,*,#5592,.F.);\r
+-#8317=ORIENTED_EDGE('',*,*,#8301,.F.);\r
+-#8318=EDGE_LOOP('',(#8314,#8315,#8316,#8317));\r
+-#8319=FACE_OUTER_BOUND('',#8318,.F.);\r
+-#8320=ADVANCED_FACE('',(#8319),#8313,.F.);\r
+-#8321=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#8322=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8323=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8324=AXIS2_PLACEMENT_3D('',#8321,#8322,#8323);\r
+-#8325=CYLINDRICAL_SURFACE('',#8324,2.575E-1);\r
+-#8326=ORIENTED_EDGE('',*,*,#6376,.T.);\r
+-#8328=ORIENTED_EDGE('',*,*,#8327,.T.);\r
+-#8330=ORIENTED_EDGE('',*,*,#8329,.F.);\r
+-#8332=ORIENTED_EDGE('',*,*,#8331,.F.);\r
+-#8333=EDGE_LOOP('',(#8326,#8328,#8330,#8332));\r
+-#8334=FACE_OUTER_BOUND('',#8333,.F.);\r
+-#8335=ADVANCED_FACE('',(#8334),#8325,.F.);\r
+-#8336=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#8337=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8338=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8339=AXIS2_PLACEMENT_3D('',#8336,#8337,#8338);\r
+-#8340=CYLINDRICAL_SURFACE('',#8339,2.575E-1);\r
+-#8341=ORIENTED_EDGE('',*,*,#6378,.T.);\r
+-#8342=ORIENTED_EDGE('',*,*,#8331,.T.);\r
+-#8344=ORIENTED_EDGE('',*,*,#8343,.F.);\r
+-#8345=ORIENTED_EDGE('',*,*,#8327,.F.);\r
+-#8346=EDGE_LOOP('',(#8341,#8342,#8344,#8345));\r
+-#8347=FACE_OUTER_BOUND('',#8346,.F.);\r
+-#8348=ADVANCED_FACE('',(#8347),#8340,.F.);\r
+-#8349=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));\r
+-#8350=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8351=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8352=AXIS2_PLACEMENT_3D('',#8349,#8350,#8351);\r
+-#8353=PLANE('',#8352);\r
+-#8354=ORIENTED_EDGE('',*,*,#8329,.T.);\r
+-#8355=ORIENTED_EDGE('',*,*,#8343,.T.);\r
+-#8356=EDGE_LOOP('',(#8354,#8355));\r
+-#8357=FACE_OUTER_BOUND('',#8356,.F.);\r
+-#8359=ORIENTED_EDGE('',*,*,#8358,.F.);\r
+-#8361=ORIENTED_EDGE('',*,*,#8360,.F.);\r
+-#8362=EDGE_LOOP('',(#8359,#8361));\r
+-#8363=FACE_BOUND('',#8362,.F.);\r
+-#8364=ADVANCED_FACE('',(#8357,#8363),#8353,.F.);\r
+-#8365=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#8366=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8367=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8368=AXIS2_PLACEMENT_3D('',#8365,#8366,#8367);\r
+-#8369=CYLINDRICAL_SURFACE('',#8368,1.925E-1);\r
+-#8370=ORIENTED_EDGE('',*,*,#8358,.T.);\r
+-#8372=ORIENTED_EDGE('',*,*,#8371,.T.);\r
+-#8373=ORIENTED_EDGE('',*,*,#5584,.F.);\r
+-#8375=ORIENTED_EDGE('',*,*,#8374,.F.);\r
+-#8376=EDGE_LOOP('',(#8370,#8372,#8373,#8375));\r
+-#8377=FACE_OUTER_BOUND('',#8376,.F.);\r
+-#8378=ADVANCED_FACE('',(#8377),#8369,.F.);\r
+-#8379=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));\r
+-#8380=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8381=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8382=AXIS2_PLACEMENT_3D('',#8379,#8380,#8381);\r
+-#8383=CYLINDRICAL_SURFACE('',#8382,1.925E-1);\r
+-#8384=ORIENTED_EDGE('',*,*,#8360,.T.);\r
+-#8385=ORIENTED_EDGE('',*,*,#8374,.T.);\r
+-#8386=ORIENTED_EDGE('',*,*,#5586,.F.);\r
+-#8387=ORIENTED_EDGE('',*,*,#8371,.F.);\r
+-#8388=EDGE_LOOP('',(#8384,#8385,#8386,#8387));\r
+-#8389=FACE_OUTER_BOUND('',#8388,.F.);\r
+-#8390=ADVANCED_FACE('',(#8389),#8383,.F.);\r
+-#8391=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#8392=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8393=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8394=AXIS2_PLACEMENT_3D('',#8391,#8392,#8393);\r
+-#8395=CYLINDRICAL_SURFACE('',#8394,2.56E-1);\r
+-#8396=ORIENTED_EDGE('',*,*,#6260,.T.);\r
+-#8398=ORIENTED_EDGE('',*,*,#8397,.T.);\r
+-#8400=ORIENTED_EDGE('',*,*,#8399,.F.);\r
+-#8402=ORIENTED_EDGE('',*,*,#8401,.F.);\r
+-#8403=EDGE_LOOP('',(#8396,#8398,#8400,#8402));\r
+-#8404=FACE_OUTER_BOUND('',#8403,.F.);\r
+-#8405=ADVANCED_FACE('',(#8404),#8395,.F.);\r
+-#8406=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#8407=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8408=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8409=AXIS2_PLACEMENT_3D('',#8406,#8407,#8408);\r
+-#8410=CYLINDRICAL_SURFACE('',#8409,2.56E-1);\r
+-#8411=ORIENTED_EDGE('',*,*,#6262,.T.);\r
+-#8412=ORIENTED_EDGE('',*,*,#8401,.T.);\r
+-#8414=ORIENTED_EDGE('',*,*,#8413,.F.);\r
+-#8415=ORIENTED_EDGE('',*,*,#8397,.F.);\r
+-#8416=EDGE_LOOP('',(#8411,#8412,#8414,#8415));\r
+-#8417=FACE_OUTER_BOUND('',#8416,.F.);\r
+-#8418=ADVANCED_FACE('',(#8417),#8410,.F.);\r
+-#8419=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));\r
+-#8420=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8421=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8422=AXIS2_PLACEMENT_3D('',#8419,#8420,#8421);\r
+-#8423=PLANE('',#8422);\r
+-#8424=ORIENTED_EDGE('',*,*,#8399,.T.);\r
+-#8425=ORIENTED_EDGE('',*,*,#8413,.T.);\r
+-#8426=EDGE_LOOP('',(#8424,#8425));\r
+-#8427=FACE_OUTER_BOUND('',#8426,.F.);\r
+-#8429=ORIENTED_EDGE('',*,*,#8428,.F.);\r
+-#8431=ORIENTED_EDGE('',*,*,#8430,.F.);\r
+-#8432=EDGE_LOOP('',(#8429,#8431));\r
+-#8433=FACE_BOUND('',#8432,.F.);\r
+-#8434=ADVANCED_FACE('',(#8427,#8433),#8423,.F.);\r
+-#8435=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#8436=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8437=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8438=AXIS2_PLACEMENT_3D('',#8435,#8436,#8437);\r
+-#8439=CYLINDRICAL_SURFACE('',#8438,1.925E-1);\r
+-#8440=ORIENTED_EDGE('',*,*,#8428,.T.);\r
+-#8442=ORIENTED_EDGE('',*,*,#8441,.T.);\r
+-#8443=ORIENTED_EDGE('',*,*,#5632,.F.);\r
+-#8445=ORIENTED_EDGE('',*,*,#8444,.F.);\r
+-#8446=EDGE_LOOP('',(#8440,#8442,#8443,#8445));\r
+-#8447=FACE_OUTER_BOUND('',#8446,.F.);\r
+-#8448=ADVANCED_FACE('',(#8447),#8439,.F.);\r
+-#8449=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));\r
+-#8450=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8451=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8452=AXIS2_PLACEMENT_3D('',#8449,#8450,#8451);\r
+-#8453=CYLINDRICAL_SURFACE('',#8452,1.925E-1);\r
+-#8454=ORIENTED_EDGE('',*,*,#8430,.T.);\r
+-#8455=ORIENTED_EDGE('',*,*,#8444,.T.);\r
+-#8456=ORIENTED_EDGE('',*,*,#5634,.F.);\r
+-#8457=ORIENTED_EDGE('',*,*,#8441,.F.);\r
+-#8458=EDGE_LOOP('',(#8454,#8455,#8456,#8457));\r
+-#8459=FACE_OUTER_BOUND('',#8458,.F.);\r
+-#8460=ADVANCED_FACE('',(#8459),#8453,.F.);\r
+-#8461=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#8462=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8463=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8464=AXIS2_PLACEMENT_3D('',#8461,#8462,#8463);\r
+-#8465=CYLINDRICAL_SURFACE('',#8464,2.56E-1);\r
+-#8466=ORIENTED_EDGE('',*,*,#6266,.T.);\r
+-#8468=ORIENTED_EDGE('',*,*,#8467,.T.);\r
+-#8470=ORIENTED_EDGE('',*,*,#8469,.F.);\r
+-#8472=ORIENTED_EDGE('',*,*,#8471,.F.);\r
+-#8473=EDGE_LOOP('',(#8466,#8468,#8470,#8472));\r
+-#8474=FACE_OUTER_BOUND('',#8473,.F.);\r
+-#8475=ADVANCED_FACE('',(#8474),#8465,.F.);\r
+-#8476=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#8477=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8478=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8479=AXIS2_PLACEMENT_3D('',#8476,#8477,#8478);\r
+-#8480=CYLINDRICAL_SURFACE('',#8479,2.56E-1);\r
+-#8481=ORIENTED_EDGE('',*,*,#6268,.T.);\r
+-#8482=ORIENTED_EDGE('',*,*,#8471,.T.);\r
+-#8484=ORIENTED_EDGE('',*,*,#8483,.F.);\r
+-#8485=ORIENTED_EDGE('',*,*,#8467,.F.);\r
+-#8486=EDGE_LOOP('',(#8481,#8482,#8484,#8485));\r
+-#8487=FACE_OUTER_BOUND('',#8486,.F.);\r
+-#8488=ADVANCED_FACE('',(#8487),#8480,.F.);\r
+-#8489=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));\r
+-#8490=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8491=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8492=AXIS2_PLACEMENT_3D('',#8489,#8490,#8491);\r
+-#8493=PLANE('',#8492);\r
+-#8494=ORIENTED_EDGE('',*,*,#8469,.T.);\r
+-#8495=ORIENTED_EDGE('',*,*,#8483,.T.);\r
+-#8496=EDGE_LOOP('',(#8494,#8495));\r
+-#8497=FACE_OUTER_BOUND('',#8496,.F.);\r
+-#8499=ORIENTED_EDGE('',*,*,#8498,.F.);\r
+-#8501=ORIENTED_EDGE('',*,*,#8500,.F.);\r
+-#8502=EDGE_LOOP('',(#8499,#8501));\r
+-#8503=FACE_BOUND('',#8502,.F.);\r
+-#8504=ADVANCED_FACE('',(#8497,#8503),#8493,.F.);\r
+-#8505=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#8506=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8507=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8508=AXIS2_PLACEMENT_3D('',#8505,#8506,#8507);\r
+-#8509=CYLINDRICAL_SURFACE('',#8508,1.925E-1);\r
+-#8510=ORIENTED_EDGE('',*,*,#8498,.T.);\r
+-#8512=ORIENTED_EDGE('',*,*,#8511,.T.);\r
+-#8513=ORIENTED_EDGE('',*,*,#5578,.F.);\r
+-#8515=ORIENTED_EDGE('',*,*,#8514,.F.);\r
+-#8516=EDGE_LOOP('',(#8510,#8512,#8513,#8515));\r
+-#8517=FACE_OUTER_BOUND('',#8516,.F.);\r
+-#8518=ADVANCED_FACE('',(#8517),#8509,.F.);\r
+-#8519=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));\r
+-#8520=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8521=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8522=AXIS2_PLACEMENT_3D('',#8519,#8520,#8521);\r
+-#8523=CYLINDRICAL_SURFACE('',#8522,1.925E-1);\r
+-#8524=ORIENTED_EDGE('',*,*,#8500,.T.);\r
+-#8525=ORIENTED_EDGE('',*,*,#8514,.T.);\r
+-#8526=ORIENTED_EDGE('',*,*,#5580,.F.);\r
+-#8527=ORIENTED_EDGE('',*,*,#8511,.F.);\r
+-#8528=EDGE_LOOP('',(#8524,#8525,#8526,#8527));\r
+-#8529=FACE_OUTER_BOUND('',#8528,.F.);\r
+-#8530=ADVANCED_FACE('',(#8529),#8523,.F.);\r
+-#8531=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#8532=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8533=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8534=AXIS2_PLACEMENT_3D('',#8531,#8532,#8533);\r
+-#8535=CYLINDRICAL_SURFACE('',#8534,2.56E-1);\r
+-#8536=ORIENTED_EDGE('',*,*,#6272,.T.);\r
+-#8538=ORIENTED_EDGE('',*,*,#8537,.T.);\r
+-#8540=ORIENTED_EDGE('',*,*,#8539,.F.);\r
+-#8542=ORIENTED_EDGE('',*,*,#8541,.F.);\r
+-#8543=EDGE_LOOP('',(#8536,#8538,#8540,#8542));\r
+-#8544=FACE_OUTER_BOUND('',#8543,.F.);\r
+-#8545=ADVANCED_FACE('',(#8544),#8535,.F.);\r
+-#8546=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#8547=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8548=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8549=AXIS2_PLACEMENT_3D('',#8546,#8547,#8548);\r
+-#8550=CYLINDRICAL_SURFACE('',#8549,2.56E-1);\r
+-#8551=ORIENTED_EDGE('',*,*,#6274,.T.);\r
+-#8552=ORIENTED_EDGE('',*,*,#8541,.T.);\r
+-#8554=ORIENTED_EDGE('',*,*,#8553,.F.);\r
+-#8555=ORIENTED_EDGE('',*,*,#8537,.F.);\r
+-#8556=EDGE_LOOP('',(#8551,#8552,#8554,#8555));\r
+-#8557=FACE_OUTER_BOUND('',#8556,.F.);\r
+-#8558=ADVANCED_FACE('',(#8557),#8550,.F.);\r
+-#8559=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));\r
+-#8560=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8561=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8562=AXIS2_PLACEMENT_3D('',#8559,#8560,#8561);\r
+-#8563=PLANE('',#8562);\r
+-#8564=ORIENTED_EDGE('',*,*,#8539,.T.);\r
+-#8565=ORIENTED_EDGE('',*,*,#8553,.T.);\r
+-#8566=EDGE_LOOP('',(#8564,#8565));\r
+-#8567=FACE_OUTER_BOUND('',#8566,.F.);\r
+-#8569=ORIENTED_EDGE('',*,*,#8568,.F.);\r
+-#8571=ORIENTED_EDGE('',*,*,#8570,.F.);\r
+-#8572=EDGE_LOOP('',(#8569,#8571));\r
+-#8573=FACE_BOUND('',#8572,.F.);\r
+-#8574=ADVANCED_FACE('',(#8567,#8573),#8563,.F.);\r
+-#8575=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#8576=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8577=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8578=AXIS2_PLACEMENT_3D('',#8575,#8576,#8577);\r
+-#8579=CYLINDRICAL_SURFACE('',#8578,1.925E-1);\r
+-#8580=ORIENTED_EDGE('',*,*,#8568,.T.);\r
+-#8582=ORIENTED_EDGE('',*,*,#8581,.T.);\r
+-#8583=ORIENTED_EDGE('',*,*,#5560,.F.);\r
+-#8585=ORIENTED_EDGE('',*,*,#8584,.F.);\r
+-#8586=EDGE_LOOP('',(#8580,#8582,#8583,#8585));\r
+-#8587=FACE_OUTER_BOUND('',#8586,.F.);\r
+-#8588=ADVANCED_FACE('',(#8587),#8579,.F.);\r
+-#8589=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));\r
+-#8590=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8591=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8592=AXIS2_PLACEMENT_3D('',#8589,#8590,#8591);\r
+-#8593=CYLINDRICAL_SURFACE('',#8592,1.925E-1);\r
+-#8594=ORIENTED_EDGE('',*,*,#8570,.T.);\r
+-#8595=ORIENTED_EDGE('',*,*,#8584,.T.);\r
+-#8596=ORIENTED_EDGE('',*,*,#5562,.F.);\r
+-#8597=ORIENTED_EDGE('',*,*,#8581,.F.);\r
+-#8598=EDGE_LOOP('',(#8594,#8595,#8596,#8597));\r
+-#8599=FACE_OUTER_BOUND('',#8598,.F.);\r
+-#8600=ADVANCED_FACE('',(#8599),#8593,.F.);\r
+-#8601=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#8602=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8603=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8604=AXIS2_PLACEMENT_3D('',#8601,#8602,#8603);\r
+-#8605=CYLINDRICAL_SURFACE('',#8604,2.56E-1);\r
+-#8606=ORIENTED_EDGE('',*,*,#6382,.T.);\r
+-#8608=ORIENTED_EDGE('',*,*,#8607,.T.);\r
+-#8610=ORIENTED_EDGE('',*,*,#8609,.F.);\r
+-#8612=ORIENTED_EDGE('',*,*,#8611,.F.);\r
+-#8613=EDGE_LOOP('',(#8606,#8608,#8610,#8612));\r
+-#8614=FACE_OUTER_BOUND('',#8613,.F.);\r
+-#8615=ADVANCED_FACE('',(#8614),#8605,.F.);\r
+-#8616=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#8617=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8618=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8619=AXIS2_PLACEMENT_3D('',#8616,#8617,#8618);\r
+-#8620=CYLINDRICAL_SURFACE('',#8619,2.56E-1);\r
+-#8621=ORIENTED_EDGE('',*,*,#6384,.T.);\r
+-#8622=ORIENTED_EDGE('',*,*,#8611,.T.);\r
+-#8624=ORIENTED_EDGE('',*,*,#8623,.F.);\r
+-#8625=ORIENTED_EDGE('',*,*,#8607,.F.);\r
+-#8626=EDGE_LOOP('',(#8621,#8622,#8624,#8625));\r
+-#8627=FACE_OUTER_BOUND('',#8626,.F.);\r
+-#8628=ADVANCED_FACE('',(#8627),#8620,.F.);\r
+-#8629=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));\r
+-#8630=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8631=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8632=AXIS2_PLACEMENT_3D('',#8629,#8630,#8631);\r
+-#8633=PLANE('',#8632);\r
+-#8634=ORIENTED_EDGE('',*,*,#8609,.T.);\r
+-#8635=ORIENTED_EDGE('',*,*,#8623,.T.);\r
+-#8636=EDGE_LOOP('',(#8634,#8635));\r
+-#8637=FACE_OUTER_BOUND('',#8636,.F.);\r
+-#8639=ORIENTED_EDGE('',*,*,#8638,.F.);\r
+-#8641=ORIENTED_EDGE('',*,*,#8640,.F.);\r
+-#8642=EDGE_LOOP('',(#8639,#8641));\r
+-#8643=FACE_BOUND('',#8642,.F.);\r
+-#8644=ADVANCED_FACE('',(#8637,#8643),#8633,.F.);\r
+-#8645=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#8646=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8647=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8648=AXIS2_PLACEMENT_3D('',#8645,#8646,#8647);\r
+-#8649=CYLINDRICAL_SURFACE('',#8648,1.925E-1);\r
+-#8650=ORIENTED_EDGE('',*,*,#8638,.T.);\r
+-#8652=ORIENTED_EDGE('',*,*,#8651,.T.);\r
+-#8653=ORIENTED_EDGE('',*,*,#5572,.F.);\r
+-#8655=ORIENTED_EDGE('',*,*,#8654,.F.);\r
+-#8656=EDGE_LOOP('',(#8650,#8652,#8653,#8655));\r
+-#8657=FACE_OUTER_BOUND('',#8656,.F.);\r
+-#8658=ADVANCED_FACE('',(#8657),#8649,.F.);\r
+-#8659=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));\r
+-#8660=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8661=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8662=AXIS2_PLACEMENT_3D('',#8659,#8660,#8661);\r
+-#8663=CYLINDRICAL_SURFACE('',#8662,1.925E-1);\r
+-#8664=ORIENTED_EDGE('',*,*,#8640,.T.);\r
+-#8665=ORIENTED_EDGE('',*,*,#8654,.T.);\r
+-#8666=ORIENTED_EDGE('',*,*,#5574,.F.);\r
+-#8667=ORIENTED_EDGE('',*,*,#8651,.F.);\r
+-#8668=EDGE_LOOP('',(#8664,#8665,#8666,#8667));\r
+-#8669=FACE_OUTER_BOUND('',#8668,.F.);\r
+-#8670=ADVANCED_FACE('',(#8669),#8663,.F.);\r
+-#8671=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#8672=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8673=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8674=AXIS2_PLACEMENT_3D('',#8671,#8672,#8673);\r
+-#8675=CYLINDRICAL_SURFACE('',#8674,2.56E-1);\r
+-#8676=ORIENTED_EDGE('',*,*,#6388,.T.);\r
+-#8678=ORIENTED_EDGE('',*,*,#8677,.T.);\r
+-#8680=ORIENTED_EDGE('',*,*,#8679,.F.);\r
+-#8682=ORIENTED_EDGE('',*,*,#8681,.F.);\r
+-#8683=EDGE_LOOP('',(#8676,#8678,#8680,#8682));\r
+-#8684=FACE_OUTER_BOUND('',#8683,.F.);\r
+-#8685=ADVANCED_FACE('',(#8684),#8675,.F.);\r
+-#8686=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#8687=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8688=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8689=AXIS2_PLACEMENT_3D('',#8686,#8687,#8688);\r
+-#8690=CYLINDRICAL_SURFACE('',#8689,2.56E-1);\r
+-#8691=ORIENTED_EDGE('',*,*,#6390,.T.);\r
+-#8692=ORIENTED_EDGE('',*,*,#8681,.T.);\r
+-#8694=ORIENTED_EDGE('',*,*,#8693,.F.);\r
+-#8695=ORIENTED_EDGE('',*,*,#8677,.F.);\r
+-#8696=EDGE_LOOP('',(#8691,#8692,#8694,#8695));\r
+-#8697=FACE_OUTER_BOUND('',#8696,.F.);\r
+-#8698=ADVANCED_FACE('',(#8697),#8690,.F.);\r
+-#8699=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));\r
+-#8700=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8701=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8702=AXIS2_PLACEMENT_3D('',#8699,#8700,#8701);\r
+-#8703=PLANE('',#8702);\r
+-#8704=ORIENTED_EDGE('',*,*,#8679,.T.);\r
+-#8705=ORIENTED_EDGE('',*,*,#8693,.T.);\r
+-#8706=EDGE_LOOP('',(#8704,#8705));\r
+-#8707=FACE_OUTER_BOUND('',#8706,.F.);\r
+-#8709=ORIENTED_EDGE('',*,*,#8708,.F.);\r
+-#8711=ORIENTED_EDGE('',*,*,#8710,.F.);\r
+-#8712=EDGE_LOOP('',(#8709,#8711));\r
+-#8713=FACE_BOUND('',#8712,.F.);\r
+-#8714=ADVANCED_FACE('',(#8707,#8713),#8703,.F.);\r
+-#8715=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#8716=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8717=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8718=AXIS2_PLACEMENT_3D('',#8715,#8716,#8717);\r
+-#8719=CYLINDRICAL_SURFACE('',#8718,1.925E-1);\r
+-#8720=ORIENTED_EDGE('',*,*,#8708,.T.);\r
+-#8722=ORIENTED_EDGE('',*,*,#8721,.T.);\r
+-#8723=ORIENTED_EDGE('',*,*,#5566,.F.);\r
+-#8725=ORIENTED_EDGE('',*,*,#8724,.F.);\r
+-#8726=EDGE_LOOP('',(#8720,#8722,#8723,#8725));\r
+-#8727=FACE_OUTER_BOUND('',#8726,.F.);\r
+-#8728=ADVANCED_FACE('',(#8727),#8719,.F.);\r
+-#8729=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));\r
+-#8730=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8731=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8732=AXIS2_PLACEMENT_3D('',#8729,#8730,#8731);\r
+-#8733=CYLINDRICAL_SURFACE('',#8732,1.925E-1);\r
+-#8734=ORIENTED_EDGE('',*,*,#8710,.T.);\r
+-#8735=ORIENTED_EDGE('',*,*,#8724,.T.);\r
+-#8736=ORIENTED_EDGE('',*,*,#5568,.F.);\r
+-#8737=ORIENTED_EDGE('',*,*,#8721,.F.);\r
+-#8738=EDGE_LOOP('',(#8734,#8735,#8736,#8737));\r
+-#8739=FACE_OUTER_BOUND('',#8738,.F.);\r
+-#8740=ADVANCED_FACE('',(#8739),#8733,.F.);\r
+-#8741=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#8742=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8743=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8744=AXIS2_PLACEMENT_3D('',#8741,#8742,#8743);\r
+-#8745=CYLINDRICAL_SURFACE('',#8744,2.56E-1);\r
+-#8746=ORIENTED_EDGE('',*,*,#6394,.T.);\r
+-#8748=ORIENTED_EDGE('',*,*,#8747,.T.);\r
+-#8750=ORIENTED_EDGE('',*,*,#8749,.F.);\r
+-#8752=ORIENTED_EDGE('',*,*,#8751,.F.);\r
+-#8753=EDGE_LOOP('',(#8746,#8748,#8750,#8752));\r
+-#8754=FACE_OUTER_BOUND('',#8753,.F.);\r
+-#8755=ADVANCED_FACE('',(#8754),#8745,.F.);\r
+-#8756=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#8757=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8758=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8759=AXIS2_PLACEMENT_3D('',#8756,#8757,#8758);\r
+-#8760=CYLINDRICAL_SURFACE('',#8759,2.56E-1);\r
+-#8761=ORIENTED_EDGE('',*,*,#6396,.T.);\r
+-#8762=ORIENTED_EDGE('',*,*,#8751,.T.);\r
+-#8764=ORIENTED_EDGE('',*,*,#8763,.F.);\r
+-#8765=ORIENTED_EDGE('',*,*,#8747,.F.);\r
+-#8766=EDGE_LOOP('',(#8761,#8762,#8764,#8765));\r
+-#8767=FACE_OUTER_BOUND('',#8766,.F.);\r
+-#8768=ADVANCED_FACE('',(#8767),#8760,.F.);\r
+-#8769=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));\r
+-#8770=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8771=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8772=AXIS2_PLACEMENT_3D('',#8769,#8770,#8771);\r
+-#8773=PLANE('',#8772);\r
+-#8774=ORIENTED_EDGE('',*,*,#8749,.T.);\r
+-#8775=ORIENTED_EDGE('',*,*,#8763,.T.);\r
+-#8776=EDGE_LOOP('',(#8774,#8775));\r
+-#8777=FACE_OUTER_BOUND('',#8776,.F.);\r
+-#8779=ORIENTED_EDGE('',*,*,#8778,.F.);\r
+-#8781=ORIENTED_EDGE('',*,*,#8780,.F.);\r
+-#8782=EDGE_LOOP('',(#8779,#8781));\r
+-#8783=FACE_BOUND('',#8782,.F.);\r
+-#8784=ADVANCED_FACE('',(#8777,#8783),#8773,.F.);\r
+-#8785=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#8786=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8787=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8788=AXIS2_PLACEMENT_3D('',#8785,#8786,#8787);\r
+-#8789=CYLINDRICAL_SURFACE('',#8788,1.925E-1);\r
+-#8790=ORIENTED_EDGE('',*,*,#8778,.T.);\r
+-#8792=ORIENTED_EDGE('',*,*,#8791,.T.);\r
+-#8793=ORIENTED_EDGE('',*,*,#5554,.F.);\r
+-#8795=ORIENTED_EDGE('',*,*,#8794,.F.);\r
+-#8796=EDGE_LOOP('',(#8790,#8792,#8793,#8795));\r
+-#8797=FACE_OUTER_BOUND('',#8796,.F.);\r
+-#8798=ADVANCED_FACE('',(#8797),#8789,.F.);\r
+-#8799=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));\r
+-#8800=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8801=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8802=AXIS2_PLACEMENT_3D('',#8799,#8800,#8801);\r
+-#8803=CYLINDRICAL_SURFACE('',#8802,1.925E-1);\r
+-#8804=ORIENTED_EDGE('',*,*,#8780,.T.);\r
+-#8805=ORIENTED_EDGE('',*,*,#8794,.T.);\r
+-#8806=ORIENTED_EDGE('',*,*,#5556,.F.);\r
+-#8807=ORIENTED_EDGE('',*,*,#8791,.F.);\r
+-#8808=EDGE_LOOP('',(#8804,#8805,#8806,#8807));\r
+-#8809=FACE_OUTER_BOUND('',#8808,.F.);\r
+-#8810=ADVANCED_FACE('',(#8809),#8803,.F.);\r
+-#8811=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#8812=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8813=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8814=AXIS2_PLACEMENT_3D('',#8811,#8812,#8813);\r
+-#8815=CYLINDRICAL_SURFACE('',#8814,2.575E-1);\r
+-#8816=ORIENTED_EDGE('',*,*,#6452,.T.);\r
+-#8818=ORIENTED_EDGE('',*,*,#8817,.T.);\r
+-#8820=ORIENTED_EDGE('',*,*,#8819,.F.);\r
+-#8822=ORIENTED_EDGE('',*,*,#8821,.F.);\r
+-#8823=EDGE_LOOP('',(#8816,#8818,#8820,#8822));\r
+-#8824=FACE_OUTER_BOUND('',#8823,.F.);\r
+-#8825=ADVANCED_FACE('',(#8824),#8815,.F.);\r
+-#8826=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#8827=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8828=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8829=AXIS2_PLACEMENT_3D('',#8826,#8827,#8828);\r
+-#8830=CYLINDRICAL_SURFACE('',#8829,2.575E-1);\r
+-#8831=ORIENTED_EDGE('',*,*,#6454,.T.);\r
+-#8832=ORIENTED_EDGE('',*,*,#8821,.T.);\r
+-#8834=ORIENTED_EDGE('',*,*,#8833,.F.);\r
+-#8835=ORIENTED_EDGE('',*,*,#8817,.F.);\r
+-#8836=EDGE_LOOP('',(#8831,#8832,#8834,#8835));\r
+-#8837=FACE_OUTER_BOUND('',#8836,.F.);\r
+-#8838=ADVANCED_FACE('',(#8837),#8830,.F.);\r
+-#8839=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));\r
+-#8840=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8841=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8842=AXIS2_PLACEMENT_3D('',#8839,#8840,#8841);\r
+-#8843=PLANE('',#8842);\r
+-#8844=ORIENTED_EDGE('',*,*,#8819,.T.);\r
+-#8845=ORIENTED_EDGE('',*,*,#8833,.T.);\r
+-#8846=EDGE_LOOP('',(#8844,#8845));\r
+-#8847=FACE_OUTER_BOUND('',#8846,.F.);\r
+-#8849=ORIENTED_EDGE('',*,*,#8848,.F.);\r
+-#8851=ORIENTED_EDGE('',*,*,#8850,.F.);\r
+-#8852=EDGE_LOOP('',(#8849,#8851));\r
+-#8853=FACE_BOUND('',#8852,.F.);\r
+-#8854=ADVANCED_FACE('',(#8847,#8853),#8843,.F.);\r
+-#8855=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#8856=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8857=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8858=AXIS2_PLACEMENT_3D('',#8855,#8856,#8857);\r
+-#8859=CYLINDRICAL_SURFACE('',#8858,1.925E-1);\r
+-#8860=ORIENTED_EDGE('',*,*,#8848,.T.);\r
+-#8862=ORIENTED_EDGE('',*,*,#8861,.T.);\r
+-#8863=ORIENTED_EDGE('',*,*,#5690,.F.);\r
+-#8865=ORIENTED_EDGE('',*,*,#8864,.F.);\r
+-#8866=EDGE_LOOP('',(#8860,#8862,#8863,#8865));\r
+-#8867=FACE_OUTER_BOUND('',#8866,.F.);\r
+-#8868=ADVANCED_FACE('',(#8867),#8859,.F.);\r
+-#8869=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));\r
+-#8870=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8871=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8872=AXIS2_PLACEMENT_3D('',#8869,#8870,#8871);\r
+-#8873=CYLINDRICAL_SURFACE('',#8872,1.925E-1);\r
+-#8874=ORIENTED_EDGE('',*,*,#8850,.T.);\r
+-#8875=ORIENTED_EDGE('',*,*,#8864,.T.);\r
+-#8876=ORIENTED_EDGE('',*,*,#5692,.F.);\r
+-#8877=ORIENTED_EDGE('',*,*,#8861,.F.);\r
+-#8878=EDGE_LOOP('',(#8874,#8875,#8876,#8877));\r
+-#8879=FACE_OUTER_BOUND('',#8878,.F.);\r
+-#8880=ADVANCED_FACE('',(#8879),#8873,.F.);\r
+-#8881=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#8882=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8883=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8884=AXIS2_PLACEMENT_3D('',#8881,#8882,#8883);\r
+-#8885=CYLINDRICAL_SURFACE('',#8884,2.575E-1);\r
+-#8886=ORIENTED_EDGE('',*,*,#6458,.T.);\r
+-#8888=ORIENTED_EDGE('',*,*,#8887,.T.);\r
+-#8890=ORIENTED_EDGE('',*,*,#8889,.F.);\r
+-#8892=ORIENTED_EDGE('',*,*,#8891,.F.);\r
+-#8893=EDGE_LOOP('',(#8886,#8888,#8890,#8892));\r
+-#8894=FACE_OUTER_BOUND('',#8893,.F.);\r
+-#8895=ADVANCED_FACE('',(#8894),#8885,.F.);\r
+-#8896=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#8897=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8898=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8899=AXIS2_PLACEMENT_3D('',#8896,#8897,#8898);\r
+-#8900=CYLINDRICAL_SURFACE('',#8899,2.575E-1);\r
+-#8901=ORIENTED_EDGE('',*,*,#6460,.T.);\r
+-#8902=ORIENTED_EDGE('',*,*,#8891,.T.);\r
+-#8904=ORIENTED_EDGE('',*,*,#8903,.F.);\r
+-#8905=ORIENTED_EDGE('',*,*,#8887,.F.);\r
+-#8906=EDGE_LOOP('',(#8901,#8902,#8904,#8905));\r
+-#8907=FACE_OUTER_BOUND('',#8906,.F.);\r
+-#8908=ADVANCED_FACE('',(#8907),#8900,.F.);\r
+-#8909=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));\r
+-#8910=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8911=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8912=AXIS2_PLACEMENT_3D('',#8909,#8910,#8911);\r
+-#8913=PLANE('',#8912);\r
+-#8914=ORIENTED_EDGE('',*,*,#8889,.T.);\r
+-#8915=ORIENTED_EDGE('',*,*,#8903,.T.);\r
+-#8916=EDGE_LOOP('',(#8914,#8915));\r
+-#8917=FACE_OUTER_BOUND('',#8916,.F.);\r
+-#8919=ORIENTED_EDGE('',*,*,#8918,.F.);\r
+-#8921=ORIENTED_EDGE('',*,*,#8920,.F.);\r
+-#8922=EDGE_LOOP('',(#8919,#8921));\r
+-#8923=FACE_BOUND('',#8922,.F.);\r
+-#8924=ADVANCED_FACE('',(#8917,#8923),#8913,.F.);\r
+-#8925=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#8926=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8927=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8928=AXIS2_PLACEMENT_3D('',#8925,#8926,#8927);\r
+-#8929=CYLINDRICAL_SURFACE('',#8928,1.925E-1);\r
+-#8930=ORIENTED_EDGE('',*,*,#8918,.T.);\r
+-#8932=ORIENTED_EDGE('',*,*,#8931,.T.);\r
+-#8933=ORIENTED_EDGE('',*,*,#5696,.F.);\r
+-#8935=ORIENTED_EDGE('',*,*,#8934,.F.);\r
+-#8936=EDGE_LOOP('',(#8930,#8932,#8933,#8935));\r
+-#8937=FACE_OUTER_BOUND('',#8936,.F.);\r
+-#8938=ADVANCED_FACE('',(#8937),#8929,.F.);\r
+-#8939=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));\r
+-#8940=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8941=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8942=AXIS2_PLACEMENT_3D('',#8939,#8940,#8941);\r
+-#8943=CYLINDRICAL_SURFACE('',#8942,1.925E-1);\r
+-#8944=ORIENTED_EDGE('',*,*,#8920,.T.);\r
+-#8945=ORIENTED_EDGE('',*,*,#8934,.T.);\r
+-#8946=ORIENTED_EDGE('',*,*,#5698,.F.);\r
+-#8947=ORIENTED_EDGE('',*,*,#8931,.F.);\r
+-#8948=EDGE_LOOP('',(#8944,#8945,#8946,#8947));\r
+-#8949=FACE_OUTER_BOUND('',#8948,.F.);\r
+-#8950=ADVANCED_FACE('',(#8949),#8943,.F.);\r
+-#8951=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#8952=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8953=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8954=AXIS2_PLACEMENT_3D('',#8951,#8952,#8953);\r
+-#8955=CYLINDRICAL_SURFACE('',#8954,2.575E-1);\r
+-#8956=ORIENTED_EDGE('',*,*,#6464,.T.);\r
+-#8958=ORIENTED_EDGE('',*,*,#8957,.T.);\r
+-#8960=ORIENTED_EDGE('',*,*,#8959,.F.);\r
+-#8962=ORIENTED_EDGE('',*,*,#8961,.F.);\r
+-#8963=EDGE_LOOP('',(#8956,#8958,#8960,#8962));\r
+-#8964=FACE_OUTER_BOUND('',#8963,.F.);\r
+-#8965=ADVANCED_FACE('',(#8964),#8955,.F.);\r
+-#8966=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#8967=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8968=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8969=AXIS2_PLACEMENT_3D('',#8966,#8967,#8968);\r
+-#8970=CYLINDRICAL_SURFACE('',#8969,2.575E-1);\r
+-#8971=ORIENTED_EDGE('',*,*,#6466,.T.);\r
+-#8972=ORIENTED_EDGE('',*,*,#8961,.T.);\r
+-#8974=ORIENTED_EDGE('',*,*,#8973,.F.);\r
+-#8975=ORIENTED_EDGE('',*,*,#8957,.F.);\r
+-#8976=EDGE_LOOP('',(#8971,#8972,#8974,#8975));\r
+-#8977=FACE_OUTER_BOUND('',#8976,.F.);\r
+-#8978=ADVANCED_FACE('',(#8977),#8970,.F.);\r
+-#8979=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));\r
+-#8980=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8981=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8982=AXIS2_PLACEMENT_3D('',#8979,#8980,#8981);\r
+-#8983=PLANE('',#8982);\r
+-#8984=ORIENTED_EDGE('',*,*,#8959,.T.);\r
+-#8985=ORIENTED_EDGE('',*,*,#8973,.T.);\r
+-#8986=EDGE_LOOP('',(#8984,#8985));\r
+-#8987=FACE_OUTER_BOUND('',#8986,.F.);\r
+-#8989=ORIENTED_EDGE('',*,*,#8988,.F.);\r
+-#8991=ORIENTED_EDGE('',*,*,#8990,.F.);\r
+-#8992=EDGE_LOOP('',(#8989,#8991));\r
+-#8993=FACE_BOUND('',#8992,.F.);\r
+-#8994=ADVANCED_FACE('',(#8987,#8993),#8983,.F.);\r
+-#8995=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#8996=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#8997=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#8998=AXIS2_PLACEMENT_3D('',#8995,#8996,#8997);\r
+-#8999=CYLINDRICAL_SURFACE('',#8998,1.925E-1);\r
+-#9000=ORIENTED_EDGE('',*,*,#8988,.T.);\r
+-#9002=ORIENTED_EDGE('',*,*,#9001,.T.);\r
+-#9003=ORIENTED_EDGE('',*,*,#5702,.F.);\r
+-#9005=ORIENTED_EDGE('',*,*,#9004,.F.);\r
+-#9006=EDGE_LOOP('',(#9000,#9002,#9003,#9005));\r
+-#9007=FACE_OUTER_BOUND('',#9006,.F.);\r
+-#9008=ADVANCED_FACE('',(#9007),#8999,.F.);\r
+-#9009=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));\r
+-#9010=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9011=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9012=AXIS2_PLACEMENT_3D('',#9009,#9010,#9011);\r
+-#9013=CYLINDRICAL_SURFACE('',#9012,1.925E-1);\r
+-#9014=ORIENTED_EDGE('',*,*,#8990,.T.);\r
+-#9015=ORIENTED_EDGE('',*,*,#9004,.T.);\r
+-#9016=ORIENTED_EDGE('',*,*,#5704,.F.);\r
+-#9017=ORIENTED_EDGE('',*,*,#9001,.F.);\r
+-#9018=EDGE_LOOP('',(#9014,#9015,#9016,#9017));\r
+-#9019=FACE_OUTER_BOUND('',#9018,.F.);\r
+-#9020=ADVANCED_FACE('',(#9019),#9013,.F.);\r
+-#9021=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#9022=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9023=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9024=AXIS2_PLACEMENT_3D('',#9021,#9022,#9023);\r
+-#9025=CYLINDRICAL_SURFACE('',#9024,2.575E-1);\r
+-#9026=ORIENTED_EDGE('',*,*,#6470,.T.);\r
+-#9028=ORIENTED_EDGE('',*,*,#9027,.T.);\r
+-#9030=ORIENTED_EDGE('',*,*,#9029,.F.);\r
+-#9032=ORIENTED_EDGE('',*,*,#9031,.F.);\r
+-#9033=EDGE_LOOP('',(#9026,#9028,#9030,#9032));\r
+-#9034=FACE_OUTER_BOUND('',#9033,.F.);\r
+-#9035=ADVANCED_FACE('',(#9034),#9025,.F.);\r
+-#9036=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#9037=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9038=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9039=AXIS2_PLACEMENT_3D('',#9036,#9037,#9038);\r
+-#9040=CYLINDRICAL_SURFACE('',#9039,2.575E-1);\r
+-#9041=ORIENTED_EDGE('',*,*,#6472,.T.);\r
+-#9042=ORIENTED_EDGE('',*,*,#9031,.T.);\r
+-#9044=ORIENTED_EDGE('',*,*,#9043,.F.);\r
+-#9045=ORIENTED_EDGE('',*,*,#9027,.F.);\r
+-#9046=EDGE_LOOP('',(#9041,#9042,#9044,#9045));\r
+-#9047=FACE_OUTER_BOUND('',#9046,.F.);\r
+-#9048=ADVANCED_FACE('',(#9047),#9040,.F.);\r
+-#9049=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));\r
+-#9050=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9051=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9052=AXIS2_PLACEMENT_3D('',#9049,#9050,#9051);\r
+-#9053=PLANE('',#9052);\r
+-#9054=ORIENTED_EDGE('',*,*,#9029,.T.);\r
+-#9055=ORIENTED_EDGE('',*,*,#9043,.T.);\r
+-#9056=EDGE_LOOP('',(#9054,#9055));\r
+-#9057=FACE_OUTER_BOUND('',#9056,.F.);\r
+-#9059=ORIENTED_EDGE('',*,*,#9058,.F.);\r
+-#9061=ORIENTED_EDGE('',*,*,#9060,.F.);\r
+-#9062=EDGE_LOOP('',(#9059,#9061));\r
+-#9063=FACE_BOUND('',#9062,.F.);\r
+-#9064=ADVANCED_FACE('',(#9057,#9063),#9053,.F.);\r
+-#9065=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#9066=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9067=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9068=AXIS2_PLACEMENT_3D('',#9065,#9066,#9067);\r
+-#9069=CYLINDRICAL_SURFACE('',#9068,1.925E-1);\r
+-#9070=ORIENTED_EDGE('',*,*,#9058,.T.);\r
+-#9072=ORIENTED_EDGE('',*,*,#9071,.T.);\r
+-#9073=ORIENTED_EDGE('',*,*,#5708,.F.);\r
+-#9075=ORIENTED_EDGE('',*,*,#9074,.F.);\r
+-#9076=EDGE_LOOP('',(#9070,#9072,#9073,#9075));\r
+-#9077=FACE_OUTER_BOUND('',#9076,.F.);\r
+-#9078=ADVANCED_FACE('',(#9077),#9069,.F.);\r
+-#9079=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));\r
+-#9080=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9081=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9082=AXIS2_PLACEMENT_3D('',#9079,#9080,#9081);\r
+-#9083=CYLINDRICAL_SURFACE('',#9082,1.925E-1);\r
+-#9084=ORIENTED_EDGE('',*,*,#9060,.T.);\r
+-#9085=ORIENTED_EDGE('',*,*,#9074,.T.);\r
+-#9086=ORIENTED_EDGE('',*,*,#5710,.F.);\r
+-#9087=ORIENTED_EDGE('',*,*,#9071,.F.);\r
+-#9088=EDGE_LOOP('',(#9084,#9085,#9086,#9087));\r
+-#9089=FACE_OUTER_BOUND('',#9088,.F.);\r
+-#9090=ADVANCED_FACE('',(#9089),#9083,.F.);\r
+-#9091=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#9092=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9093=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9094=AXIS2_PLACEMENT_3D('',#9091,#9092,#9093);\r
+-#9095=CYLINDRICAL_SURFACE('',#9094,2.575E-1);\r
+-#9096=ORIENTED_EDGE('',*,*,#6476,.T.);\r
+-#9098=ORIENTED_EDGE('',*,*,#9097,.T.);\r
+-#9100=ORIENTED_EDGE('',*,*,#9099,.F.);\r
+-#9102=ORIENTED_EDGE('',*,*,#9101,.F.);\r
+-#9103=EDGE_LOOP('',(#9096,#9098,#9100,#9102));\r
+-#9104=FACE_OUTER_BOUND('',#9103,.F.);\r
+-#9105=ADVANCED_FACE('',(#9104),#9095,.F.);\r
+-#9106=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#9107=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9108=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9109=AXIS2_PLACEMENT_3D('',#9106,#9107,#9108);\r
+-#9110=CYLINDRICAL_SURFACE('',#9109,2.575E-1);\r
+-#9111=ORIENTED_EDGE('',*,*,#6478,.T.);\r
+-#9112=ORIENTED_EDGE('',*,*,#9101,.T.);\r
+-#9114=ORIENTED_EDGE('',*,*,#9113,.F.);\r
+-#9115=ORIENTED_EDGE('',*,*,#9097,.F.);\r
+-#9116=EDGE_LOOP('',(#9111,#9112,#9114,#9115));\r
+-#9117=FACE_OUTER_BOUND('',#9116,.F.);\r
+-#9118=ADVANCED_FACE('',(#9117),#9110,.F.);\r
+-#9119=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));\r
+-#9120=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9121=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9122=AXIS2_PLACEMENT_3D('',#9119,#9120,#9121);\r
+-#9123=PLANE('',#9122);\r
+-#9124=ORIENTED_EDGE('',*,*,#9099,.T.);\r
+-#9125=ORIENTED_EDGE('',*,*,#9113,.T.);\r
+-#9126=EDGE_LOOP('',(#9124,#9125));\r
+-#9127=FACE_OUTER_BOUND('',#9126,.F.);\r
+-#9129=ORIENTED_EDGE('',*,*,#9128,.F.);\r
+-#9131=ORIENTED_EDGE('',*,*,#9130,.F.);\r
+-#9132=EDGE_LOOP('',(#9129,#9131));\r
+-#9133=FACE_BOUND('',#9132,.F.);\r
+-#9134=ADVANCED_FACE('',(#9127,#9133),#9123,.F.);\r
+-#9135=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#9136=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9137=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9138=AXIS2_PLACEMENT_3D('',#9135,#9136,#9137);\r
+-#9139=CYLINDRICAL_SURFACE('',#9138,1.925E-1);\r
+-#9140=ORIENTED_EDGE('',*,*,#9128,.T.);\r
+-#9142=ORIENTED_EDGE('',*,*,#9141,.T.);\r
+-#9143=ORIENTED_EDGE('',*,*,#5714,.F.);\r
+-#9145=ORIENTED_EDGE('',*,*,#9144,.F.);\r
+-#9146=EDGE_LOOP('',(#9140,#9142,#9143,#9145));\r
+-#9147=FACE_OUTER_BOUND('',#9146,.F.);\r
+-#9148=ADVANCED_FACE('',(#9147),#9139,.F.);\r
+-#9149=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));\r
+-#9150=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9151=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9152=AXIS2_PLACEMENT_3D('',#9149,#9150,#9151);\r
+-#9153=CYLINDRICAL_SURFACE('',#9152,1.925E-1);\r
+-#9154=ORIENTED_EDGE('',*,*,#9130,.T.);\r
+-#9155=ORIENTED_EDGE('',*,*,#9144,.T.);\r
+-#9156=ORIENTED_EDGE('',*,*,#5716,.F.);\r
+-#9157=ORIENTED_EDGE('',*,*,#9141,.F.);\r
+-#9158=EDGE_LOOP('',(#9154,#9155,#9156,#9157));\r
+-#9159=FACE_OUTER_BOUND('',#9158,.F.);\r
+-#9160=ADVANCED_FACE('',(#9159),#9153,.F.);\r
+-#9161=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#9162=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9163=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9164=AXIS2_PLACEMENT_3D('',#9161,#9162,#9163);\r
+-#9165=CYLINDRICAL_SURFACE('',#9164,2.575E-1);\r
+-#9166=ORIENTED_EDGE('',*,*,#6482,.T.);\r
+-#9168=ORIENTED_EDGE('',*,*,#9167,.T.);\r
+-#9170=ORIENTED_EDGE('',*,*,#9169,.F.);\r
+-#9172=ORIENTED_EDGE('',*,*,#9171,.F.);\r
+-#9173=EDGE_LOOP('',(#9166,#9168,#9170,#9172));\r
+-#9174=FACE_OUTER_BOUND('',#9173,.F.);\r
+-#9175=ADVANCED_FACE('',(#9174),#9165,.F.);\r
+-#9176=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#9177=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9178=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9179=AXIS2_PLACEMENT_3D('',#9176,#9177,#9178);\r
+-#9180=CYLINDRICAL_SURFACE('',#9179,2.575E-1);\r
+-#9181=ORIENTED_EDGE('',*,*,#6484,.T.);\r
+-#9182=ORIENTED_EDGE('',*,*,#9171,.T.);\r
+-#9184=ORIENTED_EDGE('',*,*,#9183,.F.);\r
+-#9185=ORIENTED_EDGE('',*,*,#9167,.F.);\r
+-#9186=EDGE_LOOP('',(#9181,#9182,#9184,#9185));\r
+-#9187=FACE_OUTER_BOUND('',#9186,.F.);\r
+-#9188=ADVANCED_FACE('',(#9187),#9180,.F.);\r
+-#9189=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));\r
+-#9190=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9191=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9192=AXIS2_PLACEMENT_3D('',#9189,#9190,#9191);\r
+-#9193=PLANE('',#9192);\r
+-#9194=ORIENTED_EDGE('',*,*,#9169,.T.);\r
+-#9195=ORIENTED_EDGE('',*,*,#9183,.T.);\r
+-#9196=EDGE_LOOP('',(#9194,#9195));\r
+-#9197=FACE_OUTER_BOUND('',#9196,.F.);\r
+-#9199=ORIENTED_EDGE('',*,*,#9198,.F.);\r
+-#9201=ORIENTED_EDGE('',*,*,#9200,.F.);\r
+-#9202=EDGE_LOOP('',(#9199,#9201));\r
+-#9203=FACE_BOUND('',#9202,.F.);\r
+-#9204=ADVANCED_FACE('',(#9197,#9203),#9193,.F.);\r
+-#9205=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#9206=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9207=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9208=AXIS2_PLACEMENT_3D('',#9205,#9206,#9207);\r
+-#9209=CYLINDRICAL_SURFACE('',#9208,1.925E-1);\r
+-#9210=ORIENTED_EDGE('',*,*,#9198,.T.);\r
+-#9212=ORIENTED_EDGE('',*,*,#9211,.T.);\r
+-#9213=ORIENTED_EDGE('',*,*,#5720,.F.);\r
+-#9215=ORIENTED_EDGE('',*,*,#9214,.F.);\r
+-#9216=EDGE_LOOP('',(#9210,#9212,#9213,#9215));\r
+-#9217=FACE_OUTER_BOUND('',#9216,.F.);\r
+-#9218=ADVANCED_FACE('',(#9217),#9209,.F.);\r
+-#9219=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));\r
+-#9220=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9221=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9222=AXIS2_PLACEMENT_3D('',#9219,#9220,#9221);\r
+-#9223=CYLINDRICAL_SURFACE('',#9222,1.925E-1);\r
+-#9224=ORIENTED_EDGE('',*,*,#9200,.T.);\r
+-#9225=ORIENTED_EDGE('',*,*,#9214,.T.);\r
+-#9226=ORIENTED_EDGE('',*,*,#5722,.F.);\r
+-#9227=ORIENTED_EDGE('',*,*,#9211,.F.);\r
+-#9228=EDGE_LOOP('',(#9224,#9225,#9226,#9227));\r
+-#9229=FACE_OUTER_BOUND('',#9228,.F.);\r
+-#9230=ADVANCED_FACE('',(#9229),#9223,.F.);\r
+-#9231=CARTESIAN_POINT('',(2.2E1,1.5E0,1.2E1));\r
+-#9232=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9233=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9234=AXIS2_PLACEMENT_3D('',#9231,#9232,#9233);\r
+-#9235=PLANE('',#9234);\r
+-#9236=ORIENTED_EDGE('',*,*,#6328,.T.);\r
+-#9237=ORIENTED_EDGE('',*,*,#6155,.T.);\r
+-#9239=ORIENTED_EDGE('',*,*,#9238,.T.);\r
+-#9240=EDGE_LOOP('',(#9236,#9237,#9239));\r
+-#9241=FACE_OUTER_BOUND('',#9240,.F.);\r
+-#9242=ADVANCED_FACE('',(#9241),#9235,.F.);\r
+-#9243=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));\r
+-#9244=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));\r
+-#9245=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));\r
+-#9246=AXIS2_PLACEMENT_3D('',#9243,#9244,#9245);\r
+-#9247=PLANE('',#9246);\r
+-#9248=ORIENTED_EDGE('',*,*,#6330,.T.);\r
+-#9249=ORIENTED_EDGE('',*,*,#9238,.F.);\r
+-#9250=ORIENTED_EDGE('',*,*,#6153,.F.);\r
+-#9251=ORIENTED_EDGE('',*,*,#6209,.T.);\r
+-#9252=EDGE_LOOP('',(#9248,#9249,#9250,#9251));\r
+-#9253=FACE_OUTER_BOUND('',#9252,.F.);\r
+-#9255=ORIENTED_EDGE('',*,*,#9254,.F.);\r
+-#9257=ORIENTED_EDGE('',*,*,#9256,.F.);\r
+-#9258=EDGE_LOOP('',(#9255,#9257));\r
+-#9259=FACE_BOUND('',#9258,.F.);\r
+-#9260=ADVANCED_FACE('',(#9253,#9259),#9247,.F.);\r
+-#9261=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));\r
+-#9262=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9263=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9264=AXIS2_PLACEMENT_3D('',#9261,#9262,#9263);\r
+-#9265=CYLINDRICAL_SURFACE('',#9264,2.575E-1);\r
+-#9267=ORIENTED_EDGE('',*,*,#9266,.F.);\r
+-#9268=ORIENTED_EDGE('',*,*,#9254,.T.);\r
+-#9270=ORIENTED_EDGE('',*,*,#9269,.F.);\r
+-#9272=ORIENTED_EDGE('',*,*,#9271,.F.);\r
+-#9273=EDGE_LOOP('',(#9267,#9268,#9270,#9272));\r
+-#9274=FACE_OUTER_BOUND('',#9273,.F.);\r
+-#9275=ADVANCED_FACE('',(#9274),#9265,.F.);\r
+-#9276=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));\r
+-#9277=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9278=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9279=AXIS2_PLACEMENT_3D('',#9276,#9277,#9278);\r
+-#9280=CYLINDRICAL_SURFACE('',#9279,2.575E-1);\r
+-#9281=ORIENTED_EDGE('',*,*,#9269,.T.);\r
+-#9282=ORIENTED_EDGE('',*,*,#9256,.T.);\r
+-#9283=ORIENTED_EDGE('',*,*,#9266,.T.);\r
+-#9285=ORIENTED_EDGE('',*,*,#9284,.F.);\r
+-#9286=EDGE_LOOP('',(#9281,#9282,#9283,#9285));\r
+-#9287=FACE_OUTER_BOUND('',#9286,.F.);\r
+-#9288=ADVANCED_FACE('',(#9287),#9280,.F.);\r
+-#9289=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));\r
+-#9290=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9291=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9292=AXIS2_PLACEMENT_3D('',#9289,#9290,#9291);\r
+-#9293=PLANE('',#9292);\r
+-#9294=ORIENTED_EDGE('',*,*,#9271,.T.);\r
+-#9295=ORIENTED_EDGE('',*,*,#9284,.T.);\r
+-#9296=EDGE_LOOP('',(#9294,#9295));\r
+-#9297=FACE_OUTER_BOUND('',#9296,.F.);\r
+-#9299=ORIENTED_EDGE('',*,*,#9298,.F.);\r
+-#9301=ORIENTED_EDGE('',*,*,#9300,.F.);\r
+-#9302=EDGE_LOOP('',(#9299,#9301));\r
+-#9303=FACE_BOUND('',#9302,.F.);\r
+-#9304=ADVANCED_FACE('',(#9297,#9303),#9293,.F.);\r
+-#9305=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));\r
+-#9306=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9307=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9308=AXIS2_PLACEMENT_3D('',#9305,#9306,#9307);\r
+-#9309=CYLINDRICAL_SURFACE('',#9308,1.925E-1);\r
+-#9310=ORIENTED_EDGE('',*,*,#9298,.T.);\r
+-#9312=ORIENTED_EDGE('',*,*,#9311,.T.);\r
+-#9313=ORIENTED_EDGE('',*,*,#5596,.F.);\r
+-#9315=ORIENTED_EDGE('',*,*,#9314,.F.);\r
+-#9316=EDGE_LOOP('',(#9310,#9312,#9313,#9315));\r
+-#9317=FACE_OUTER_BOUND('',#9316,.F.);\r
+-#9318=ADVANCED_FACE('',(#9317),#9309,.F.);\r
+-#9319=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));\r
+-#9320=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9321=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9322=AXIS2_PLACEMENT_3D('',#9319,#9320,#9321);\r
+-#9323=CYLINDRICAL_SURFACE('',#9322,1.925E-1);\r
+-#9324=ORIENTED_EDGE('',*,*,#9300,.T.);\r
+-#9325=ORIENTED_EDGE('',*,*,#9314,.T.);\r
+-#9326=ORIENTED_EDGE('',*,*,#5598,.F.);\r
+-#9327=ORIENTED_EDGE('',*,*,#9311,.F.);\r
+-#9328=EDGE_LOOP('',(#9324,#9325,#9326,#9327));\r
+-#9329=FACE_OUTER_BOUND('',#9328,.F.);\r
+-#9330=ADVANCED_FACE('',(#9329),#9323,.F.);\r
+-#9331=CARTESIAN_POINT('',(2.185E1,6.65E0,1.006892397423E1));\r
+-#9332=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9333=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9334=AXIS2_PLACEMENT_3D('',#9331,#9332,#9333);\r
+-#9335=CYLINDRICAL_SURFACE('',#9334,3.5E-1);\r
+-#9337=ORIENTED_EDGE('',*,*,#9336,.T.);\r
+-#9339=ORIENTED_EDGE('',*,*,#9338,.T.);\r
+-#9341=ORIENTED_EDGE('',*,*,#9340,.F.);\r
+-#9342=ORIENTED_EDGE('',*,*,#6175,.T.);\r
+-#9343=EDGE_LOOP('',(#9337,#9339,#9341,#9342));\r
+-#9344=FACE_OUTER_BOUND('',#9343,.F.);\r
+-#9345=ADVANCED_FACE('',(#9344),#9335,.T.);\r
+-#9346=CARTESIAN_POINT('',(2.15E1,7.E0,1.E1));\r
+-#9347=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9348=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9349=AXIS2_PLACEMENT_3D('',#9346,#9347,#9348);\r
+-#9350=PLANE('',#9349);\r
+-#9351=ORIENTED_EDGE('',*,*,#9336,.F.);\r
+-#9352=ORIENTED_EDGE('',*,*,#6197,.T.);\r
+-#9354=ORIENTED_EDGE('',*,*,#9353,.F.);\r
+-#9356=ORIENTED_EDGE('',*,*,#9355,.F.);\r
+-#9357=EDGE_LOOP('',(#9351,#9352,#9354,#9356));\r
+-#9358=FACE_OUTER_BOUND('',#9357,.F.);\r
+-#9359=ADVANCED_FACE('',(#9358),#9350,.T.);\r
+-#9360=CARTESIAN_POINT('',(2.115E1,2.35E0,9.441108058217E0));\r
+-#9361=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9362=DIRECTION('',(1.015061051086E-14,-1.E0,0.E0));\r
+-#9363=AXIS2_PLACEMENT_3D('',#9360,#9361,#9362);\r
+-#9364=CYLINDRICAL_SURFACE('',#9363,3.5E-1);\r
+-#9366=ORIENTED_EDGE('',*,*,#9365,.F.);\r
+-#9368=ORIENTED_EDGE('',*,*,#9367,.T.);\r
+-#9369=ORIENTED_EDGE('',*,*,#9353,.T.);\r
+-#9370=ORIENTED_EDGE('',*,*,#6195,.T.);\r
+-#9371=EDGE_LOOP('',(#9366,#9368,#9369,#9370));\r
+-#9372=FACE_OUTER_BOUND('',#9371,.F.);\r
+-#9373=ADVANCED_FACE('',(#9372),#9364,.F.);\r
+-#9374=CARTESIAN_POINT('',(2.15E1,2.E0,1.E1));\r
+-#9375=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9376=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9377=AXIS2_PLACEMENT_3D('',#9374,#9375,#9376);\r
+-#9378=PLANE('',#9377);\r
+-#9379=ORIENTED_EDGE('',*,*,#9365,.T.);\r
+-#9380=ORIENTED_EDGE('',*,*,#6193,.T.);\r
+-#9382=ORIENTED_EDGE('',*,*,#9381,.F.);\r
+-#9384=ORIENTED_EDGE('',*,*,#9383,.F.);\r
+-#9385=EDGE_LOOP('',(#9379,#9380,#9382,#9384));\r
+-#9386=FACE_OUTER_BOUND('',#9385,.F.);\r
+-#9387=ADVANCED_FACE('',(#9386),#9378,.T.);\r
+-#9388=CARTESIAN_POINT('',(1.985E1,2.35E0,9.441108058217E0));\r
+-#9389=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9390=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9391=AXIS2_PLACEMENT_3D('',#9388,#9389,#9390);\r
+-#9392=CYLINDRICAL_SURFACE('',#9391,3.5E-1);\r
+-#9394=ORIENTED_EDGE('',*,*,#9393,.F.);\r
+-#9396=ORIENTED_EDGE('',*,*,#9395,.T.);\r
+-#9397=ORIENTED_EDGE('',*,*,#9381,.T.);\r
+-#9398=ORIENTED_EDGE('',*,*,#6191,.T.);\r
+-#9399=EDGE_LOOP('',(#9394,#9396,#9397,#9398));\r
+-#9400=FACE_OUTER_BOUND('',#9399,.F.);\r
+-#9401=ADVANCED_FACE('',(#9400),#9392,.F.);\r
+-#9402=CARTESIAN_POINT('',(1.95E1,2.E0,1.E1));\r
+-#9403=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9404=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9405=AXIS2_PLACEMENT_3D('',#9402,#9403,#9404);\r
+-#9406=PLANE('',#9405);\r
+-#9407=ORIENTED_EDGE('',*,*,#9393,.T.);\r
+-#9408=ORIENTED_EDGE('',*,*,#6189,.T.);\r
+-#9410=ORIENTED_EDGE('',*,*,#9409,.F.);\r
+-#9412=ORIENTED_EDGE('',*,*,#9411,.F.);\r
+-#9413=EDGE_LOOP('',(#9407,#9408,#9410,#9412));\r
+-#9414=FACE_OUTER_BOUND('',#9413,.F.);\r
+-#9415=ADVANCED_FACE('',(#9414),#9406,.T.);\r
+-#9416=CARTESIAN_POINT('',(1.985E1,9.15E0,9.441108058217E0));\r
+-#9417=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9418=DIRECTION('',(-1.015061051086E-14,1.E0,0.E0));\r
+-#9419=AXIS2_PLACEMENT_3D('',#9416,#9417,#9418);\r
+-#9420=CYLINDRICAL_SURFACE('',#9419,3.5E-1);\r
+-#9422=ORIENTED_EDGE('',*,*,#9421,.F.);\r
+-#9424=ORIENTED_EDGE('',*,*,#9423,.T.);\r
+-#9425=ORIENTED_EDGE('',*,*,#9409,.T.);\r
+-#9426=ORIENTED_EDGE('',*,*,#6187,.T.);\r
+-#9427=EDGE_LOOP('',(#9422,#9424,#9425,#9426));\r
+-#9428=FACE_OUTER_BOUND('',#9427,.F.);\r
+-#9429=ADVANCED_FACE('',(#9428),#9420,.F.);\r
+-#9430=CARTESIAN_POINT('',(1.95E1,9.5E0,1.E1));\r
+-#9431=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9432=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9433=AXIS2_PLACEMENT_3D('',#9430,#9431,#9432);\r
+-#9434=PLANE('',#9433);\r
+-#9436=ORIENTED_EDGE('',*,*,#9435,.F.);\r
+-#9438=ORIENTED_EDGE('',*,*,#9437,.F.);\r
+-#9439=ORIENTED_EDGE('',*,*,#9421,.T.);\r
+-#9440=ORIENTED_EDGE('',*,*,#6185,.T.);\r
+-#9441=EDGE_LOOP('',(#9436,#9438,#9439,#9440));\r
+-#9442=FACE_OUTER_BOUND('',#9441,.F.);\r
+-#9443=ADVANCED_FACE('',(#9442),#9434,.T.);\r
+-#9444=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,9.441108058217E0));\r
+-#9445=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9446=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#9447=AXIS2_PLACEMENT_3D('',#9444,#9445,#9446);\r
+-#9448=CYLINDRICAL_SURFACE('',#9447,3.5E-1);\r
+-#9450=ORIENTED_EDGE('',*,*,#9449,.F.);\r
+-#9452=ORIENTED_EDGE('',*,*,#9451,.T.);\r
+-#9453=ORIENTED_EDGE('',*,*,#9435,.T.);\r
+-#9454=ORIENTED_EDGE('',*,*,#6183,.T.);\r
+-#9455=EDGE_LOOP('',(#9450,#9452,#9453,#9454));\r
+-#9456=FACE_OUTER_BOUND('',#9455,.F.);\r
+-#9457=ADVANCED_FACE('',(#9456),#9448,.F.);\r
+-#9458=CARTESIAN_POINT('',(2.125314193270E1,9.5E0,1.E1));\r
+-#9459=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));\r
+-#9460=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));\r
+-#9461=AXIS2_PLACEMENT_3D('',#9458,#9459,#9460);\r
+-#9462=PLANE('',#9461);\r
+-#9464=ORIENTED_EDGE('',*,*,#9463,.F.);\r
+-#9466=ORIENTED_EDGE('',*,*,#9465,.F.);\r
+-#9467=ORIENTED_EDGE('',*,*,#9449,.T.);\r
+-#9468=ORIENTED_EDGE('',*,*,#6181,.T.);\r
+-#9469=EDGE_LOOP('',(#9464,#9466,#9467,#9468));\r
+-#9470=FACE_OUTER_BOUND('',#9469,.F.);\r
+-#9471=ADVANCED_FACE('',(#9470),#9462,.T.);\r
+-#9472=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,9.441108058217E0));\r
+-#9473=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9474=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9475=AXIS2_PLACEMENT_3D('',#9472,#9473,#9474);\r
+-#9476=CYLINDRICAL_SURFACE('',#9475,3.5E-1);\r
+-#9478=ORIENTED_EDGE('',*,*,#9477,.F.);\r
+-#9480=ORIENTED_EDGE('',*,*,#9479,.T.);\r
+-#9481=ORIENTED_EDGE('',*,*,#9463,.T.);\r
+-#9482=ORIENTED_EDGE('',*,*,#6179,.T.);\r
+-#9483=EDGE_LOOP('',(#9478,#9480,#9481,#9482));\r
+-#9484=FACE_OUTER_BOUND('',#9483,.F.);\r
+-#9485=ADVANCED_FACE('',(#9484),#9476,.F.);\r
+-#9486=CARTESIAN_POINT('',(2.264203082158E1,7.E0,1.E1));\r
+-#9487=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9488=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9489=AXIS2_PLACEMENT_3D('',#9486,#9487,#9488);\r
+-#9490=PLANE('',#9489);\r
+-#9491=ORIENTED_EDGE('',*,*,#9340,.T.);\r
+-#9493=ORIENTED_EDGE('',*,*,#9492,.F.);\r
+-#9494=ORIENTED_EDGE('',*,*,#9477,.T.);\r
+-#9495=ORIENTED_EDGE('',*,*,#6177,.T.);\r
+-#9496=EDGE_LOOP('',(#9491,#9493,#9494,#9495));\r
+-#9497=FACE_OUTER_BOUND('',#9496,.F.);\r
+-#9498=ADVANCED_FACE('',(#9497),#9490,.T.);\r
+-#9499=CARTESIAN_POINT('',(2.4E1,0.E0,9.5E0));\r
+-#9500=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9501=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9502=AXIS2_PLACEMENT_3D('',#9499,#9500,#9501);\r
+-#9503=PLANE('',#9502);\r
+-#9504=ORIENTED_EDGE('',*,*,#9492,.T.);\r
+-#9505=ORIENTED_EDGE('',*,*,#9338,.F.);\r
+-#9506=ORIENTED_EDGE('',*,*,#9355,.T.);\r
+-#9507=ORIENTED_EDGE('',*,*,#9367,.F.);\r
+-#9508=ORIENTED_EDGE('',*,*,#9383,.T.);\r
+-#9509=ORIENTED_EDGE('',*,*,#9395,.F.);\r
+-#9510=ORIENTED_EDGE('',*,*,#9411,.T.);\r
+-#9511=ORIENTED_EDGE('',*,*,#9423,.F.);\r
+-#9512=ORIENTED_EDGE('',*,*,#9437,.T.);\r
+-#9513=ORIENTED_EDGE('',*,*,#9451,.F.);\r
+-#9514=ORIENTED_EDGE('',*,*,#9465,.T.);\r
+-#9515=ORIENTED_EDGE('',*,*,#9479,.F.);\r
+-#9516=EDGE_LOOP('',(#9504,#9505,#9506,#9507,#9508,#9509,#9510,#9511,#9512,#9513,\r
+-#9514,#9515));\r
+-#9517=FACE_OUTER_BOUND('',#9516,.F.);\r
+-#9518=ADVANCED_FACE('',(#9517),#9503,.F.);\r
+-#9519=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));\r
+-#9520=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9521=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9522=AXIS2_PLACEMENT_3D('',#9519,#9520,#9521);\r
+-#9523=CYLINDRICAL_SURFACE('',#9522,9.5E-2);\r
+-#9524=ORIENTED_EDGE('',*,*,#6007,.F.);\r
+-#9526=ORIENTED_EDGE('',*,*,#9525,.T.);\r
+-#9528=ORIENTED_EDGE('',*,*,#9527,.T.);\r
+-#9530=ORIENTED_EDGE('',*,*,#9529,.F.);\r
+-#9531=EDGE_LOOP('',(#9524,#9526,#9528,#9530));\r
+-#9532=FACE_OUTER_BOUND('',#9531,.F.);\r
+-#9533=ADVANCED_FACE('',(#9532),#9523,.F.);\r
+-#9534=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));\r
+-#9535=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9536=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9537=AXIS2_PLACEMENT_3D('',#9534,#9535,#9536);\r
+-#9538=CYLINDRICAL_SURFACE('',#9537,9.5E-2);\r
+-#9539=ORIENTED_EDGE('',*,*,#6009,.F.);\r
+-#9540=ORIENTED_EDGE('',*,*,#9529,.T.);\r
+-#9542=ORIENTED_EDGE('',*,*,#9541,.T.);\r
+-#9543=ORIENTED_EDGE('',*,*,#9525,.F.);\r
+-#9544=EDGE_LOOP('',(#9539,#9540,#9542,#9543));\r
+-#9545=FACE_OUTER_BOUND('',#9544,.F.);\r
+-#9546=ADVANCED_FACE('',(#9545),#9538,.F.);\r
+-#9547=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));\r
+-#9548=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9549=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9550=AXIS2_PLACEMENT_3D('',#9547,#9548,#9549);\r
+-#9551=PLANE('',#9550);\r
+-#9552=ORIENTED_EDGE('',*,*,#9527,.F.);\r
+-#9553=ORIENTED_EDGE('',*,*,#9541,.F.);\r
+-#9554=EDGE_LOOP('',(#9552,#9553));\r
+-#9555=FACE_OUTER_BOUND('',#9554,.F.);\r
+-#9556=ADVANCED_FACE('',(#9555),#9551,.T.);\r
+-#9557=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));\r
+-#9558=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9559=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9560=AXIS2_PLACEMENT_3D('',#9557,#9558,#9559);\r
+-#9561=CYLINDRICAL_SURFACE('',#9560,9.5E-2);\r
+-#9562=ORIENTED_EDGE('',*,*,#6013,.F.);\r
+-#9564=ORIENTED_EDGE('',*,*,#9563,.T.);\r
+-#9566=ORIENTED_EDGE('',*,*,#9565,.T.);\r
+-#9568=ORIENTED_EDGE('',*,*,#9567,.F.);\r
+-#9569=EDGE_LOOP('',(#9562,#9564,#9566,#9568));\r
+-#9570=FACE_OUTER_BOUND('',#9569,.F.);\r
+-#9571=ADVANCED_FACE('',(#9570),#9561,.F.);\r
+-#9572=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));\r
+-#9573=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9574=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9575=AXIS2_PLACEMENT_3D('',#9572,#9573,#9574);\r
+-#9576=CYLINDRICAL_SURFACE('',#9575,9.5E-2);\r
+-#9577=ORIENTED_EDGE('',*,*,#6015,.F.);\r
+-#9578=ORIENTED_EDGE('',*,*,#9567,.T.);\r
+-#9580=ORIENTED_EDGE('',*,*,#9579,.T.);\r
+-#9581=ORIENTED_EDGE('',*,*,#9563,.F.);\r
+-#9582=EDGE_LOOP('',(#9577,#9578,#9580,#9581));\r
+-#9583=FACE_OUTER_BOUND('',#9582,.F.);\r
+-#9584=ADVANCED_FACE('',(#9583),#9576,.F.);\r
+-#9585=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));\r
+-#9586=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9587=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9588=AXIS2_PLACEMENT_3D('',#9585,#9586,#9587);\r
+-#9589=PLANE('',#9588);\r
+-#9590=ORIENTED_EDGE('',*,*,#9565,.F.);\r
+-#9591=ORIENTED_EDGE('',*,*,#9579,.F.);\r
+-#9592=EDGE_LOOP('',(#9590,#9591));\r
+-#9593=FACE_OUTER_BOUND('',#9592,.F.);\r
+-#9594=ADVANCED_FACE('',(#9593),#9589,.T.);\r
+-#9595=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));\r
+-#9596=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9597=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9598=AXIS2_PLACEMENT_3D('',#9595,#9596,#9597);\r
+-#9599=CYLINDRICAL_SURFACE('',#9598,9.5E-2);\r
+-#9600=ORIENTED_EDGE('',*,*,#6019,.T.);\r
+-#9602=ORIENTED_EDGE('',*,*,#9601,.T.);\r
+-#9604=ORIENTED_EDGE('',*,*,#9603,.F.);\r
+-#9606=ORIENTED_EDGE('',*,*,#9605,.F.);\r
+-#9607=EDGE_LOOP('',(#9600,#9602,#9604,#9606));\r
+-#9608=FACE_OUTER_BOUND('',#9607,.F.);\r
+-#9609=ADVANCED_FACE('',(#9608),#9599,.F.);\r
+-#9610=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));\r
+-#9611=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9612=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9613=AXIS2_PLACEMENT_3D('',#9610,#9611,#9612);\r
+-#9614=CYLINDRICAL_SURFACE('',#9613,9.5E-2);\r
+-#9615=ORIENTED_EDGE('',*,*,#6021,.T.);\r
+-#9616=ORIENTED_EDGE('',*,*,#9605,.T.);\r
+-#9618=ORIENTED_EDGE('',*,*,#9617,.F.);\r
+-#9619=ORIENTED_EDGE('',*,*,#9601,.F.);\r
+-#9620=EDGE_LOOP('',(#9615,#9616,#9618,#9619));\r
+-#9621=FACE_OUTER_BOUND('',#9620,.F.);\r
+-#9622=ADVANCED_FACE('',(#9621),#9614,.F.);\r
+-#9623=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));\r
+-#9624=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9625=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9626=AXIS2_PLACEMENT_3D('',#9623,#9624,#9625);\r
+-#9627=PLANE('',#9626);\r
+-#9628=ORIENTED_EDGE('',*,*,#9603,.T.);\r
+-#9629=ORIENTED_EDGE('',*,*,#9617,.T.);\r
+-#9630=EDGE_LOOP('',(#9628,#9629));\r
+-#9631=FACE_OUTER_BOUND('',#9630,.F.);\r
+-#9632=ADVANCED_FACE('',(#9631),#9627,.F.);\r
+-#9633=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));\r
+-#9634=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9635=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9636=AXIS2_PLACEMENT_3D('',#9633,#9634,#9635);\r
+-#9637=CYLINDRICAL_SURFACE('',#9636,9.5E-2);\r
+-#9638=ORIENTED_EDGE('',*,*,#6025,.T.);\r
+-#9640=ORIENTED_EDGE('',*,*,#9639,.T.);\r
+-#9642=ORIENTED_EDGE('',*,*,#9641,.F.);\r
+-#9644=ORIENTED_EDGE('',*,*,#9643,.F.);\r
+-#9645=EDGE_LOOP('',(#9638,#9640,#9642,#9644));\r
+-#9646=FACE_OUTER_BOUND('',#9645,.F.);\r
+-#9647=ADVANCED_FACE('',(#9646),#9637,.F.);\r
+-#9648=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));\r
+-#9649=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9650=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9651=AXIS2_PLACEMENT_3D('',#9648,#9649,#9650);\r
+-#9652=CYLINDRICAL_SURFACE('',#9651,9.5E-2);\r
+-#9653=ORIENTED_EDGE('',*,*,#6027,.T.);\r
+-#9654=ORIENTED_EDGE('',*,*,#9643,.T.);\r
+-#9656=ORIENTED_EDGE('',*,*,#9655,.F.);\r
+-#9657=ORIENTED_EDGE('',*,*,#9639,.F.);\r
+-#9658=EDGE_LOOP('',(#9653,#9654,#9656,#9657));\r
+-#9659=FACE_OUTER_BOUND('',#9658,.F.);\r
+-#9660=ADVANCED_FACE('',(#9659),#9652,.F.);\r
+-#9661=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));\r
+-#9662=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9663=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9664=AXIS2_PLACEMENT_3D('',#9661,#9662,#9663);\r
+-#9665=PLANE('',#9664);\r
+-#9666=ORIENTED_EDGE('',*,*,#9641,.T.);\r
+-#9667=ORIENTED_EDGE('',*,*,#9655,.T.);\r
+-#9668=EDGE_LOOP('',(#9666,#9667));\r
+-#9669=FACE_OUTER_BOUND('',#9668,.F.);\r
+-#9670=ADVANCED_FACE('',(#9669),#9665,.F.);\r
+-#9671=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));\r
+-#9672=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9673=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9674=AXIS2_PLACEMENT_3D('',#9671,#9672,#9673);\r
+-#9675=CYLINDRICAL_SURFACE('',#9674,9.5E-2);\r
+-#9676=ORIENTED_EDGE('',*,*,#6037,.T.);\r
+-#9678=ORIENTED_EDGE('',*,*,#9677,.T.);\r
+-#9680=ORIENTED_EDGE('',*,*,#9679,.F.);\r
+-#9682=ORIENTED_EDGE('',*,*,#9681,.F.);\r
+-#9683=EDGE_LOOP('',(#9676,#9678,#9680,#9682));\r
+-#9684=FACE_OUTER_BOUND('',#9683,.F.);\r
+-#9685=ADVANCED_FACE('',(#9684),#9675,.F.);\r
+-#9686=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));\r
+-#9687=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9688=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9689=AXIS2_PLACEMENT_3D('',#9686,#9687,#9688);\r
+-#9690=CYLINDRICAL_SURFACE('',#9689,9.5E-2);\r
+-#9691=ORIENTED_EDGE('',*,*,#6039,.T.);\r
+-#9692=ORIENTED_EDGE('',*,*,#9681,.T.);\r
+-#9694=ORIENTED_EDGE('',*,*,#9693,.F.);\r
+-#9695=ORIENTED_EDGE('',*,*,#9677,.F.);\r
+-#9696=EDGE_LOOP('',(#9691,#9692,#9694,#9695));\r
+-#9697=FACE_OUTER_BOUND('',#9696,.F.);\r
+-#9698=ADVANCED_FACE('',(#9697),#9690,.F.);\r
+-#9699=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));\r
+-#9700=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9701=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9702=AXIS2_PLACEMENT_3D('',#9699,#9700,#9701);\r
+-#9703=PLANE('',#9702);\r
+-#9704=ORIENTED_EDGE('',*,*,#9679,.T.);\r
+-#9705=ORIENTED_EDGE('',*,*,#9693,.T.);\r
+-#9706=EDGE_LOOP('',(#9704,#9705));\r
+-#9707=FACE_OUTER_BOUND('',#9706,.F.);\r
+-#9708=ADVANCED_FACE('',(#9707),#9703,.F.);\r
+-#9709=CARTESIAN_POINT('',(4.5E0,2.E0,8.E0));\r
+-#9710=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9711=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9712=AXIS2_PLACEMENT_3D('',#9709,#9710,#9711);\r
+-#9713=PLANE('',#9712);\r
+-#9715=ORIENTED_EDGE('',*,*,#9714,.T.);\r
+-#9717=ORIENTED_EDGE('',*,*,#9716,.T.);\r
+-#9719=ORIENTED_EDGE('',*,*,#9718,.F.);\r
+-#9720=ORIENTED_EDGE('',*,*,#6043,.F.);\r
+-#9721=EDGE_LOOP('',(#9715,#9717,#9719,#9720));\r
+-#9722=FACE_OUTER_BOUND('',#9721,.F.);\r
+-#9723=ADVANCED_FACE('',(#9722),#9713,.F.);\r
+-#9724=CARTESIAN_POINT('',(3.75E0,2.75E0,7.931076025772E0));\r
+-#9725=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9726=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9727=AXIS2_PLACEMENT_3D('',#9724,#9725,#9726);\r
+-#9728=CYLINDRICAL_SURFACE('',#9727,7.5E-1);\r
+-#9729=ORIENTED_EDGE('',*,*,#9714,.F.);\r
+-#9730=ORIENTED_EDGE('',*,*,#6057,.T.);\r
+-#9732=ORIENTED_EDGE('',*,*,#9731,.T.);\r
+-#9734=ORIENTED_EDGE('',*,*,#9733,.T.);\r
+-#9735=EDGE_LOOP('',(#9729,#9730,#9732,#9734));\r
+-#9736=FACE_OUTER_BOUND('',#9735,.F.);\r
+-#9737=ADVANCED_FACE('',(#9736),#9728,.F.);\r
+-#9738=CARTESIAN_POINT('',(4.5E0,9.5E0,8.E0));\r
+-#9739=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9740=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9741=AXIS2_PLACEMENT_3D('',#9738,#9739,#9740);\r
+-#9742=PLANE('',#9741);\r
+-#9743=ORIENTED_EDGE('',*,*,#9731,.F.);\r
+-#9744=ORIENTED_EDGE('',*,*,#6055,.F.);\r
+-#9746=ORIENTED_EDGE('',*,*,#9745,.T.);\r
+-#9748=ORIENTED_EDGE('',*,*,#9747,.T.);\r
+-#9749=EDGE_LOOP('',(#9743,#9744,#9746,#9748));\r
+-#9750=FACE_OUTER_BOUND('',#9749,.F.);\r
+-#9751=ADVANCED_FACE('',(#9750),#9742,.F.);\r
+-#9752=CARTESIAN_POINT('',(3.75E0,8.75E0,7.931076025772E0));\r
+-#9753=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9754=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9755=AXIS2_PLACEMENT_3D('',#9752,#9753,#9754);\r
+-#9756=CYLINDRICAL_SURFACE('',#9755,7.5E-1);\r
+-#9757=ORIENTED_EDGE('',*,*,#9745,.F.);\r
+-#9758=ORIENTED_EDGE('',*,*,#6053,.T.);\r
+-#9760=ORIENTED_EDGE('',*,*,#9759,.T.);\r
+-#9762=ORIENTED_EDGE('',*,*,#9761,.T.);\r
+-#9763=EDGE_LOOP('',(#9757,#9758,#9760,#9762));\r
+-#9764=FACE_OUTER_BOUND('',#9763,.F.);\r
+-#9765=ADVANCED_FACE('',(#9764),#9756,.F.);\r
+-#9766=CARTESIAN_POINT('',(2.746858067304E0,9.5E0,8.E0));\r
+-#9767=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9768=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9769=AXIS2_PLACEMENT_3D('',#9766,#9767,#9768);\r
+-#9770=PLANE('',#9769);\r
+-#9772=ORIENTED_EDGE('',*,*,#9771,.T.);\r
+-#9774=ORIENTED_EDGE('',*,*,#9773,.T.);\r
+-#9775=ORIENTED_EDGE('',*,*,#9759,.F.);\r
+-#9776=ORIENTED_EDGE('',*,*,#6051,.F.);\r
+-#9777=EDGE_LOOP('',(#9772,#9774,#9775,#9776));\r
+-#9778=FACE_OUTER_BOUND('',#9777,.F.);\r
+-#9779=ADVANCED_FACE('',(#9778),#9770,.F.);\r
+-#9780=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,7.931076025772E0));\r
+-#9781=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9782=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9783=AXIS2_PLACEMENT_3D('',#9780,#9781,#9782);\r
+-#9784=CYLINDRICAL_SURFACE('',#9783,7.5E-1);\r
+-#9785=ORIENTED_EDGE('',*,*,#9771,.F.);\r
+-#9786=ORIENTED_EDGE('',*,*,#6049,.T.);\r
+-#9788=ORIENTED_EDGE('',*,*,#9787,.T.);\r
+-#9790=ORIENTED_EDGE('',*,*,#9789,.T.);\r
+-#9791=EDGE_LOOP('',(#9785,#9786,#9788,#9790));\r
+-#9792=FACE_OUTER_BOUND('',#9791,.F.);\r
+-#9793=ADVANCED_FACE('',(#9792),#9784,.F.);\r
+-#9794=CARTESIAN_POINT('',(-1.419808599362E0,2.E0,8.E0));\r
+-#9795=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#9796=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#9797=AXIS2_PLACEMENT_3D('',#9794,#9795,#9796);\r
+-#9798=PLANE('',#9797);\r
+-#9800=ORIENTED_EDGE('',*,*,#9799,.T.);\r
+-#9802=ORIENTED_EDGE('',*,*,#9801,.T.);\r
+-#9803=ORIENTED_EDGE('',*,*,#9787,.F.);\r
+-#9804=ORIENTED_EDGE('',*,*,#6047,.F.);\r
+-#9805=EDGE_LOOP('',(#9800,#9802,#9803,#9804));\r
+-#9806=FACE_OUTER_BOUND('',#9805,.F.);\r
+-#9807=ADVANCED_FACE('',(#9806),#9798,.F.);\r
+-#9808=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,7.931076025772E0));\r
+-#9809=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9810=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#9811=AXIS2_PLACEMENT_3D('',#9808,#9809,#9810);\r
+-#9812=CYLINDRICAL_SURFACE('',#9811,7.5E-1);\r
+-#9813=ORIENTED_EDGE('',*,*,#9799,.F.);\r
+-#9814=ORIENTED_EDGE('',*,*,#6045,.T.);\r
+-#9815=ORIENTED_EDGE('',*,*,#9718,.T.);\r
+-#9817=ORIENTED_EDGE('',*,*,#9816,.T.);\r
+-#9818=EDGE_LOOP('',(#9813,#9814,#9815,#9817));\r
+-#9819=FACE_OUTER_BOUND('',#9818,.F.);\r
+-#9820=ADVANCED_FACE('',(#9819),#9812,.F.);\r
+-#9821=CARTESIAN_POINT('',(0.E0,0.E0,8.5E0));\r
+-#9822=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9823=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9824=AXIS2_PLACEMENT_3D('',#9821,#9822,#9823);\r
+-#9825=PLANE('',#9824);\r
+-#9826=ORIENTED_EDGE('',*,*,#9733,.F.);\r
+-#9827=ORIENTED_EDGE('',*,*,#9747,.F.);\r
+-#9828=ORIENTED_EDGE('',*,*,#9761,.F.);\r
+-#9829=ORIENTED_EDGE('',*,*,#9773,.F.);\r
+-#9830=ORIENTED_EDGE('',*,*,#9789,.F.);\r
+-#9831=ORIENTED_EDGE('',*,*,#9801,.F.);\r
+-#9832=ORIENTED_EDGE('',*,*,#9816,.F.);\r
+-#9833=ORIENTED_EDGE('',*,*,#9716,.F.);\r
+-#9834=EDGE_LOOP('',(#9826,#9827,#9828,#9829,#9830,#9831,#9832,#9833));\r
+-#9835=FACE_OUTER_BOUND('',#9834,.F.);\r
+-#9836=ADVANCED_FACE('',(#9835),#9825,.T.);\r
+-#9837=CARTESIAN_POINT('',(2.541980859936E1,2.E0,8.E0));\r
+-#9838=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));\r
+-#9839=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));\r
+-#9840=AXIS2_PLACEMENT_3D('',#9837,#9838,#9839);\r
+-#9841=PLANE('',#9840);\r
+-#9843=ORIENTED_EDGE('',*,*,#9842,.T.);\r
+-#9844=ORIENTED_EDGE('',*,*,#6061,.T.);\r
+-#9846=ORIENTED_EDGE('',*,*,#9845,.F.);\r
+-#9848=ORIENTED_EDGE('',*,*,#9847,.F.);\r
+-#9849=EDGE_LOOP('',(#9843,#9844,#9846,#9848));\r
+-#9850=FACE_OUTER_BOUND('',#9849,.F.);\r
+-#9851=ADVANCED_FACE('',(#9850),#9841,.T.);\r
+-#9852=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.558891941783E0));\r
+-#9853=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9854=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));\r
+-#9855=AXIS2_PLACEMENT_3D('',#9852,#9853,#9854);\r
+-#9856=CYLINDRICAL_SURFACE('',#9855,7.5E-1);\r
+-#9857=ORIENTED_EDGE('',*,*,#9842,.F.);\r
+-#9859=ORIENTED_EDGE('',*,*,#9858,.T.);\r
+-#9861=ORIENTED_EDGE('',*,*,#9860,.T.);\r
+-#9862=ORIENTED_EDGE('',*,*,#6063,.T.);\r
+-#9863=EDGE_LOOP('',(#9857,#9859,#9861,#9862));\r
+-#9864=FACE_OUTER_BOUND('',#9863,.F.);\r
+-#9865=ADVANCED_FACE('',(#9864),#9856,.F.);\r
+-#9866=CARTESIAN_POINT('',(2.4E1,0.E0,8.5E0));\r
+-#9867=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9868=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9869=AXIS2_PLACEMENT_3D('',#9866,#9867,#9868);\r
+-#9870=PLANE('',#9869);\r
+-#9872=ORIENTED_EDGE('',*,*,#9871,.F.);\r
+-#9874=ORIENTED_EDGE('',*,*,#9873,.T.);\r
+-#9875=ORIENTED_EDGE('',*,*,#9858,.F.);\r
+-#9876=ORIENTED_EDGE('',*,*,#9847,.T.);\r
+-#9878=ORIENTED_EDGE('',*,*,#9877,.F.);\r
+-#9880=ORIENTED_EDGE('',*,*,#9879,.T.);\r
+-#9882=ORIENTED_EDGE('',*,*,#9881,.F.);\r
+-#9884=ORIENTED_EDGE('',*,*,#9883,.T.);\r
+-#9885=EDGE_LOOP('',(#9872,#9874,#9875,#9876,#9878,#9880,#9882,#9884));\r
+-#9886=FACE_OUTER_BOUND('',#9885,.F.);\r
+-#9887=ADVANCED_FACE('',(#9886),#9870,.F.);\r
+-#9888=CARTESIAN_POINT('',(2.025E1,2.75E0,8.558891941783E0));\r
+-#9889=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9890=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9891=AXIS2_PLACEMENT_3D('',#9888,#9889,#9890);\r
+-#9892=CYLINDRICAL_SURFACE('',#9891,7.5E-1);\r
+-#9894=ORIENTED_EDGE('',*,*,#9893,.F.);\r
+-#9895=ORIENTED_EDGE('',*,*,#9871,.T.);\r
+-#9897=ORIENTED_EDGE('',*,*,#9896,.T.);\r
+-#9898=ORIENTED_EDGE('',*,*,#6067,.T.);\r
+-#9899=EDGE_LOOP('',(#9894,#9895,#9897,#9898));\r
+-#9900=FACE_OUTER_BOUND('',#9899,.F.);\r
+-#9901=ADVANCED_FACE('',(#9900),#9892,.F.);\r
+-#9902=CARTESIAN_POINT('',(1.95E1,2.E0,8.E0));\r
+-#9903=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9904=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9905=AXIS2_PLACEMENT_3D('',#9902,#9903,#9904);\r
+-#9906=PLANE('',#9905);\r
+-#9907=ORIENTED_EDGE('',*,*,#9893,.T.);\r
+-#9908=ORIENTED_EDGE('',*,*,#6065,.T.);\r
+-#9909=ORIENTED_EDGE('',*,*,#9860,.F.);\r
+-#9910=ORIENTED_EDGE('',*,*,#9873,.F.);\r
+-#9911=EDGE_LOOP('',(#9907,#9908,#9909,#9910));\r
+-#9912=FACE_OUTER_BOUND('',#9911,.F.);\r
+-#9913=ADVANCED_FACE('',(#9912),#9906,.T.);\r
+-#9914=CARTESIAN_POINT('',(1.95E1,9.5E0,8.E0));\r
+-#9915=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9916=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9917=AXIS2_PLACEMENT_3D('',#9914,#9915,#9916);\r
+-#9918=PLANE('',#9917);\r
+-#9919=ORIENTED_EDGE('',*,*,#9896,.F.);\r
+-#9920=ORIENTED_EDGE('',*,*,#9883,.F.);\r
+-#9922=ORIENTED_EDGE('',*,*,#9921,.T.);\r
+-#9923=ORIENTED_EDGE('',*,*,#6069,.T.);\r
+-#9924=EDGE_LOOP('',(#9919,#9920,#9922,#9923));\r
+-#9925=FACE_OUTER_BOUND('',#9924,.F.);\r
+-#9926=ADVANCED_FACE('',(#9925),#9918,.T.);\r
+-#9927=CARTESIAN_POINT('',(2.025E1,8.75E0,8.558891941783E0));\r
+-#9928=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9929=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9930=AXIS2_PLACEMENT_3D('',#9927,#9928,#9929);\r
+-#9931=CYLINDRICAL_SURFACE('',#9930,7.5E-1);\r
+-#9932=ORIENTED_EDGE('',*,*,#9921,.F.);\r
+-#9933=ORIENTED_EDGE('',*,*,#9881,.T.);\r
+-#9935=ORIENTED_EDGE('',*,*,#9934,.T.);\r
+-#9936=ORIENTED_EDGE('',*,*,#6071,.T.);\r
+-#9937=EDGE_LOOP('',(#9932,#9933,#9935,#9936));\r
+-#9938=FACE_OUTER_BOUND('',#9937,.F.);\r
+-#9939=ADVANCED_FACE('',(#9938),#9931,.F.);\r
+-#9940=CARTESIAN_POINT('',(2.125314193270E1,9.5E0,8.E0));\r
+-#9941=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9942=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9943=AXIS2_PLACEMENT_3D('',#9940,#9941,#9942);\r
+-#9944=PLANE('',#9943);\r
+-#9946=ORIENTED_EDGE('',*,*,#9945,.T.);\r
+-#9947=ORIENTED_EDGE('',*,*,#6073,.T.);\r
+-#9948=ORIENTED_EDGE('',*,*,#9934,.F.);\r
+-#9949=ORIENTED_EDGE('',*,*,#9879,.F.);\r
+-#9950=EDGE_LOOP('',(#9946,#9947,#9948,#9949));\r
+-#9951=FACE_OUTER_BOUND('',#9950,.F.);\r
+-#9952=ADVANCED_FACE('',(#9951),#9944,.T.);\r
+-#9953=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.558891941783E0));\r
+-#9954=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9955=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#9956=AXIS2_PLACEMENT_3D('',#9953,#9954,#9955);\r
+-#9957=CYLINDRICAL_SURFACE('',#9956,7.5E-1);\r
+-#9958=ORIENTED_EDGE('',*,*,#9945,.F.);\r
+-#9959=ORIENTED_EDGE('',*,*,#9877,.T.);\r
+-#9960=ORIENTED_EDGE('',*,*,#9845,.T.);\r
+-#9961=ORIENTED_EDGE('',*,*,#6075,.T.);\r
+-#9962=EDGE_LOOP('',(#9958,#9959,#9960,#9961));\r
+-#9963=FACE_OUTER_BOUND('',#9962,.F.);\r
+-#9964=ADVANCED_FACE('',(#9963),#9957,.F.);\r
+-#9965=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));\r
+-#9966=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#9967=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9968=AXIS2_PLACEMENT_3D('',#9965,#9966,#9967);\r
+-#9969=PLANE('',#9968);\r
+-#9970=ORIENTED_EDGE('',*,*,#5726,.F.);\r
+-#9972=ORIENTED_EDGE('',*,*,#9971,.T.);\r
+-#9974=ORIENTED_EDGE('',*,*,#9973,.T.);\r
+-#9976=ORIENTED_EDGE('',*,*,#9975,.F.);\r
+-#9977=EDGE_LOOP('',(#9970,#9972,#9974,#9976));\r
+-#9978=FACE_OUTER_BOUND('',#9977,.F.);\r
+-#9979=ADVANCED_FACE('',(#9978),#9969,.F.);\r
+-#9980=CARTESIAN_POINT('',(7.5E0,0.E0,1.25E0));\r
+-#9981=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#9982=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#9983=AXIS2_PLACEMENT_3D('',#9980,#9981,#9982);\r
+-#9984=CYLINDRICAL_SURFACE('',#9983,5.625E-1);\r
+-#9985=ORIENTED_EDGE('',*,*,#5732,.F.);\r
+-#9987=ORIENTED_EDGE('',*,*,#9986,.T.);\r
+-#9989=ORIENTED_EDGE('',*,*,#9988,.T.);\r
+-#9990=ORIENTED_EDGE('',*,*,#9971,.F.);\r
+-#9991=EDGE_LOOP('',(#9985,#9987,#9989,#9990));\r
+-#9992=FACE_OUTER_BOUND('',#9991,.F.);\r
+-#9993=ADVANCED_FACE('',(#9992),#9984,.F.);\r
+-#9994=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));\r
+-#9995=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#9996=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#9997=AXIS2_PLACEMENT_3D('',#9994,#9995,#9996);\r
+-#9998=PLANE('',#9997);\r
+-#9999=ORIENTED_EDGE('',*,*,#5730,.F.);\r
+-#10001=ORIENTED_EDGE('',*,*,#10000,.T.);\r
+-#10003=ORIENTED_EDGE('',*,*,#10002,.T.);\r
+-#10004=ORIENTED_EDGE('',*,*,#9986,.F.);\r
+-#10005=EDGE_LOOP('',(#9999,#10001,#10003,#10004));\r
+-#10006=FACE_OUTER_BOUND('',#10005,.F.);\r
+-#10007=ADVANCED_FACE('',(#10006),#9998,.F.);\r
+-#10008=CARTESIAN_POINT('',(1.05E1,0.E0,1.25E0));\r
+-#10009=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10010=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10011=AXIS2_PLACEMENT_3D('',#10008,#10009,#10010);\r
+-#10012=CYLINDRICAL_SURFACE('',#10011,5.625E-1);\r
+-#10013=ORIENTED_EDGE('',*,*,#5728,.F.);\r
+-#10014=ORIENTED_EDGE('',*,*,#9975,.T.);\r
+-#10016=ORIENTED_EDGE('',*,*,#10015,.T.);\r
+-#10017=ORIENTED_EDGE('',*,*,#10000,.F.);\r
+-#10018=EDGE_LOOP('',(#10013,#10014,#10016,#10017));\r
+-#10019=FACE_OUTER_BOUND('',#10018,.F.);\r
+-#10020=ADVANCED_FACE('',(#10019),#10012,.F.);\r
+-#10021=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10022=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10023=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10024=AXIS2_PLACEMENT_3D('',#10021,#10022,#10023);\r
+-#10025=PLANE('',#10024);\r
+-#10026=ORIENTED_EDGE('',*,*,#9973,.F.);\r
+-#10027=ORIENTED_EDGE('',*,*,#9988,.F.);\r
+-#10028=ORIENTED_EDGE('',*,*,#10002,.F.);\r
+-#10029=ORIENTED_EDGE('',*,*,#10015,.F.);\r
+-#10030=EDGE_LOOP('',(#10026,#10027,#10028,#10029));\r
+-#10031=FACE_OUTER_BOUND('',#10030,.F.);\r
+-#10032=ADVANCED_FACE('',(#10031),#10025,.T.);\r
+-#10033=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10034=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10035=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10036=AXIS2_PLACEMENT_3D('',#10033,#10034,#10035);\r
+-#10037=PLANE('',#10036);\r
+-#10039=ORIENTED_EDGE('',*,*,#10038,.F.);\r
+-#10041=ORIENTED_EDGE('',*,*,#10040,.F.);\r
+-#10043=ORIENTED_EDGE('',*,*,#10042,.F.);\r
+-#10045=ORIENTED_EDGE('',*,*,#10044,.F.);\r
+-#10047=ORIENTED_EDGE('',*,*,#10046,.F.);\r
+-#10048=EDGE_LOOP('',(#10039,#10041,#10043,#10045,#10047));\r
+-#10049=FACE_OUTER_BOUND('',#10048,.F.);\r
+-#10050=ADVANCED_FACE('',(#10049),#10037,.T.);\r
+-#10051=CARTESIAN_POINT('',(1.455736763592E0,-6.892397422826E-2,\r
+-4.577195232320E0));\r
+-#10052=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10053=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#10054=AXIS2_PLACEMENT_3D('',#10051,#10052,#10053);\r
+-#10055=CYLINDRICAL_SURFACE('',#10054,7.5E-1);\r
+-#10057=ORIENTED_EDGE('',*,*,#10056,.F.);\r
+-#10058=ORIENTED_EDGE('',*,*,#5738,.T.);\r
+-#10060=ORIENTED_EDGE('',*,*,#10059,.T.);\r
+-#10061=ORIENTED_EDGE('',*,*,#10038,.T.);\r
+-#10062=EDGE_LOOP('',(#10057,#10058,#10060,#10061));\r
+-#10063=FACE_OUTER_BOUND('',#10062,.F.);\r
+-#10064=ADVANCED_FACE('',(#10063),#10055,.F.);\r
+-#10065=CARTESIAN_POINT('',(6.875E-1,0.E0,4.284771824132E0));\r
+-#10066=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#10067=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#10068=AXIS2_PLACEMENT_3D('',#10065,#10066,#10067);\r
+-#10069=PLANE('',#10068);\r
+-#10070=ORIENTED_EDGE('',*,*,#10056,.T.);\r
+-#10071=ORIENTED_EDGE('',*,*,#10046,.T.);\r
+-#10073=ORIENTED_EDGE('',*,*,#10072,.F.);\r
+-#10074=ORIENTED_EDGE('',*,*,#5740,.F.);\r
+-#10075=EDGE_LOOP('',(#10070,#10071,#10073,#10074));\r
+-#10076=FACE_OUTER_BOUND('',#10075,.F.);\r
+-#10077=ADVANCED_FACE('',(#10076),#10069,.F.);\r
+-#10078=CARTESIAN_POINT('',(4.553039342392E0,0.E0,1.645354088550E0));\r
+-#10079=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10080=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10081=AXIS2_PLACEMENT_3D('',#10078,#10079,#10080);\r
+-#10082=CYLINDRICAL_SURFACE('',#10081,8.669989027347E-1);\r
+-#10083=ORIENTED_EDGE('',*,*,#5742,.F.);\r
+-#10084=ORIENTED_EDGE('',*,*,#10072,.T.);\r
+-#10085=ORIENTED_EDGE('',*,*,#10044,.T.);\r
+-#10087=ORIENTED_EDGE('',*,*,#10086,.F.);\r
+-#10088=EDGE_LOOP('',(#10083,#10084,#10085,#10087));\r
+-#10089=FACE_OUTER_BOUND('',#10088,.F.);\r
+-#10090=ADVANCED_FACE('',(#10089),#10082,.F.);\r
+-#10091=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));\r
+-#10092=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10093=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10094=AXIS2_PLACEMENT_3D('',#10091,#10092,#10093);\r
+-#10095=CYLINDRICAL_SURFACE('',#10094,5.6875E0);\r
+-#10096=ORIENTED_EDGE('',*,*,#5744,.T.);\r
+-#10097=ORIENTED_EDGE('',*,*,#10086,.T.);\r
+-#10098=ORIENTED_EDGE('',*,*,#10042,.T.);\r
+-#10100=ORIENTED_EDGE('',*,*,#10099,.F.);\r
+-#10101=EDGE_LOOP('',(#10096,#10097,#10098,#10100));\r
+-#10102=FACE_OUTER_BOUND('',#10101,.F.);\r
+-#10103=ADVANCED_FACE('',(#10102),#10095,.T.);\r
+-#10104=CARTESIAN_POINT('',(1.61E0,0.E0,4.5E0));\r
+-#10105=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10106=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10107=AXIS2_PLACEMENT_3D('',#10104,#10105,#10106);\r
+-#10108=CYLINDRICAL_SURFACE('',#10107,9.225E-1);\r
+-#10109=ORIENTED_EDGE('',*,*,#10059,.F.);\r
+-#10110=ORIENTED_EDGE('',*,*,#5736,.F.);\r
+-#10111=ORIENTED_EDGE('',*,*,#10099,.T.);\r
+-#10112=ORIENTED_EDGE('',*,*,#10040,.T.);\r
+-#10113=EDGE_LOOP('',(#10109,#10110,#10111,#10112));\r
+-#10114=FACE_OUTER_BOUND('',#10113,.F.);\r
+-#10115=ADVANCED_FACE('',(#10114),#10108,.F.);\r
+-#10116=CARTESIAN_POINT('',(-1.85E-1,7.463919417831E-1,7.815E0));\r
+-#10117=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10118=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10119=AXIS2_PLACEMENT_3D('',#10116,#10117,#10118);\r
+-#10120=CYLINDRICAL_SURFACE('',#10119,8.75E-1);\r
+-#10122=ORIENTED_EDGE('',*,*,#10121,.T.);\r
+-#10123=ORIENTED_EDGE('',*,*,#5748,.T.);\r
+-#10125=ORIENTED_EDGE('',*,*,#10124,.F.);\r
+-#10127=ORIENTED_EDGE('',*,*,#10126,.T.);\r
+-#10128=EDGE_LOOP('',(#10122,#10123,#10125,#10127));\r
+-#10129=FACE_OUTER_BOUND('',#10128,.F.);\r
+-#10130=ADVANCED_FACE('',(#10129),#10120,.T.);\r
+-#10131=CARTESIAN_POINT('',(6.9E-1,0.E0,8.69E0));\r
+-#10132=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10133=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10134=AXIS2_PLACEMENT_3D('',#10131,#10132,#10133);\r
+-#10135=PLANE('',#10134);\r
+-#10136=ORIENTED_EDGE('',*,*,#10121,.F.);\r
+-#10138=ORIENTED_EDGE('',*,*,#10137,.T.);\r
+-#10140=ORIENTED_EDGE('',*,*,#10139,.F.);\r
+-#10141=ORIENTED_EDGE('',*,*,#5750,.F.);\r
+-#10142=EDGE_LOOP('',(#10136,#10138,#10140,#10141));\r
+-#10143=FACE_OUTER_BOUND('',#10142,.F.);\r
+-#10144=ADVANCED_FACE('',(#10143),#10135,.F.);\r
+-#10145=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10146=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10147=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10148=AXIS2_PLACEMENT_3D('',#10145,#10146,#10147);\r
+-#10149=PLANE('',#10148);\r
+-#10151=ORIENTED_EDGE('',*,*,#10150,.F.);\r
+-#10153=ORIENTED_EDGE('',*,*,#10152,.F.);\r
+-#10155=ORIENTED_EDGE('',*,*,#10154,.F.);\r
+-#10157=ORIENTED_EDGE('',*,*,#10156,.F.);\r
+-#10158=ORIENTED_EDGE('',*,*,#10137,.F.);\r
+-#10159=ORIENTED_EDGE('',*,*,#10126,.F.);\r
+-#10161=ORIENTED_EDGE('',*,*,#10160,.F.);\r
+-#10163=ORIENTED_EDGE('',*,*,#10162,.F.);\r
+-#10165=ORIENTED_EDGE('',*,*,#10164,.F.);\r
+-#10167=ORIENTED_EDGE('',*,*,#10166,.F.);\r
+-#10169=ORIENTED_EDGE('',*,*,#10168,.F.);\r
+-#10171=ORIENTED_EDGE('',*,*,#10170,.F.);\r
+-#10173=ORIENTED_EDGE('',*,*,#10172,.F.);\r
+-#10175=ORIENTED_EDGE('',*,*,#10174,.F.);\r
+-#10176=EDGE_LOOP('',(#10151,#10153,#10155,#10157,#10158,#10159,#10161,#10163,\r
+-#10165,#10167,#10169,#10171,#10173,#10175));\r
+-#10177=FACE_OUTER_BOUND('',#10176,.F.);\r
+-#10178=ADVANCED_FACE('',(#10177),#10149,.T.);\r
+-#10179=CARTESIAN_POINT('',(1.8125E0,0.E0,8.69E0));\r
+-#10180=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10181=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10182=AXIS2_PLACEMENT_3D('',#10179,#10180,#10181);\r
+-#10183=PLANE('',#10182);\r
+-#10185=ORIENTED_EDGE('',*,*,#10184,.F.);\r
+-#10186=ORIENTED_EDGE('',*,*,#10150,.T.);\r
+-#10188=ORIENTED_EDGE('',*,*,#10187,.F.);\r
+-#10189=ORIENTED_EDGE('',*,*,#5758,.F.);\r
+-#10190=EDGE_LOOP('',(#10185,#10186,#10188,#10189));\r
+-#10191=FACE_OUTER_BOUND('',#10190,.F.);\r
+-#10192=ADVANCED_FACE('',(#10191),#10183,.F.);\r
+-#10193=CARTESIAN_POINT('',(2.6875E0,7.463919417831E-1,7.815E0));\r
+-#10194=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10195=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10196=AXIS2_PLACEMENT_3D('',#10193,#10194,#10195);\r
+-#10197=CYLINDRICAL_SURFACE('',#10196,8.75E-1);\r
+-#10198=ORIENTED_EDGE('',*,*,#10184,.T.);\r
+-#10199=ORIENTED_EDGE('',*,*,#5756,.T.);\r
+-#10201=ORIENTED_EDGE('',*,*,#10200,.F.);\r
+-#10202=ORIENTED_EDGE('',*,*,#10152,.T.);\r
+-#10203=EDGE_LOOP('',(#10198,#10199,#10201,#10202));\r
+-#10204=FACE_OUTER_BOUND('',#10203,.F.);\r
+-#10205=ADVANCED_FACE('',(#10204),#10197,.T.);\r
+-#10206=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));\r
+-#10207=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10208=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10209=AXIS2_PLACEMENT_3D('',#10206,#10207,#10208);\r
+-#10210=PLANE('',#10209);\r
+-#10211=ORIENTED_EDGE('',*,*,#10200,.T.);\r
+-#10212=ORIENTED_EDGE('',*,*,#5754,.F.);\r
+-#10214=ORIENTED_EDGE('',*,*,#10213,.T.);\r
+-#10215=ORIENTED_EDGE('',*,*,#10154,.T.);\r
+-#10216=EDGE_LOOP('',(#10211,#10212,#10214,#10215));\r
+-#10217=FACE_OUTER_BOUND('',#10216,.F.);\r
+-#10218=ADVANCED_FACE('',(#10217),#10210,.F.);\r
+-#10219=CARTESIAN_POINT('',(1.25125E0,0.E0,7.5E0));\r
+-#10220=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10221=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10222=AXIS2_PLACEMENT_3D('',#10219,#10220,#10221);\r
+-#10223=CYLINDRICAL_SURFACE('',#10222,5.6125E-1);\r
+-#10224=ORIENTED_EDGE('',*,*,#5752,.F.);\r
+-#10225=ORIENTED_EDGE('',*,*,#10139,.T.);\r
+-#10226=ORIENTED_EDGE('',*,*,#10156,.T.);\r
+-#10227=ORIENTED_EDGE('',*,*,#10213,.F.);\r
+-#10228=EDGE_LOOP('',(#10224,#10225,#10226,#10227));\r
+-#10229=FACE_OUTER_BOUND('',#10228,.F.);\r
+-#10230=ADVANCED_FACE('',(#10229),#10223,.F.);\r
+-#10231=CARTESIAN_POINT('',(3.4375E0,-6.892397422826E-2,9.565E0));\r
+-#10232=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10233=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10234=AXIS2_PLACEMENT_3D('',#10231,#10232,#10233);\r
+-#10235=CYLINDRICAL_SURFACE('',#10234,8.75E-1);\r
+-#10237=ORIENTED_EDGE('',*,*,#10236,.F.);\r
+-#10238=ORIENTED_EDGE('',*,*,#5760,.T.);\r
+-#10239=ORIENTED_EDGE('',*,*,#10187,.T.);\r
+-#10240=ORIENTED_EDGE('',*,*,#10174,.T.);\r
+-#10241=EDGE_LOOP('',(#10237,#10238,#10239,#10240));\r
+-#10242=FACE_OUTER_BOUND('',#10241,.F.);\r
+-#10243=ADVANCED_FACE('',(#10242),#10235,.F.);\r
+-#10244=CARTESIAN_POINT('',(4.3125E0,0.E0,8.69E0));\r
+-#10245=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10246=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10247=AXIS2_PLACEMENT_3D('',#10244,#10245,#10246);\r
+-#10248=PLANE('',#10247);\r
+-#10249=ORIENTED_EDGE('',*,*,#10236,.T.);\r
+-#10250=ORIENTED_EDGE('',*,*,#10172,.T.);\r
+-#10252=ORIENTED_EDGE('',*,*,#10251,.F.);\r
+-#10253=ORIENTED_EDGE('',*,*,#5762,.F.);\r
+-#10254=EDGE_LOOP('',(#10249,#10250,#10252,#10253));\r
+-#10255=FACE_OUTER_BOUND('',#10254,.F.);\r
+-#10256=ADVANCED_FACE('',(#10255),#10248,.F.);\r
+-#10257=CARTESIAN_POINT('',(3.4375E0,-6.892397422826E-2,1.0375E1));\r
+-#10258=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10259=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10260=AXIS2_PLACEMENT_3D('',#10257,#10258,#10259);\r
+-#10261=CYLINDRICAL_SURFACE('',#10260,8.75E-1);\r
+-#10263=ORIENTED_EDGE('',*,*,#10262,.F.);\r
+-#10264=ORIENTED_EDGE('',*,*,#5764,.T.);\r
+-#10265=ORIENTED_EDGE('',*,*,#10251,.T.);\r
+-#10266=ORIENTED_EDGE('',*,*,#10170,.T.);\r
+-#10267=EDGE_LOOP('',(#10263,#10264,#10265,#10266));\r
+-#10268=FACE_OUTER_BOUND('',#10267,.F.);\r
+-#10269=ADVANCED_FACE('',(#10268),#10261,.F.);\r
+-#10270=CARTESIAN_POINT('',(4.3125E0,0.E0,1.125E1));\r
+-#10271=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10272=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10273=AXIS2_PLACEMENT_3D('',#10270,#10271,#10272);\r
+-#10274=PLANE('',#10273);\r
+-#10276=ORIENTED_EDGE('',*,*,#10275,.F.);\r
+-#10277=ORIENTED_EDGE('',*,*,#5766,.F.);\r
+-#10278=ORIENTED_EDGE('',*,*,#10262,.T.);\r
+-#10279=ORIENTED_EDGE('',*,*,#10168,.T.);\r
+-#10280=EDGE_LOOP('',(#10276,#10277,#10278,#10279));\r
+-#10281=FACE_OUTER_BOUND('',#10280,.F.);\r
+-#10282=ADVANCED_FACE('',(#10281),#10274,.F.);\r
+-#10283=CARTESIAN_POINT('',(-4.375E-1,-6.892397422826E-2,1.0375E1));\r
+-#10284=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10285=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10286=AXIS2_PLACEMENT_3D('',#10283,#10284,#10285);\r
+-#10287=CYLINDRICAL_SURFACE('',#10286,8.75E-1);\r
+-#10289=ORIENTED_EDGE('',*,*,#10288,.F.);\r
+-#10290=ORIENTED_EDGE('',*,*,#5768,.T.);\r
+-#10291=ORIENTED_EDGE('',*,*,#10275,.T.);\r
+-#10292=ORIENTED_EDGE('',*,*,#10166,.T.);\r
+-#10293=EDGE_LOOP('',(#10289,#10290,#10291,#10292));\r
+-#10294=FACE_OUTER_BOUND('',#10293,.F.);\r
+-#10295=ADVANCED_FACE('',(#10294),#10287,.F.);\r
+-#10296=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.125E1));\r
+-#10297=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10298=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10299=AXIS2_PLACEMENT_3D('',#10296,#10297,#10298);\r
+-#10300=PLANE('',#10299);\r
+-#10301=ORIENTED_EDGE('',*,*,#10288,.T.);\r
+-#10302=ORIENTED_EDGE('',*,*,#10164,.T.);\r
+-#10304=ORIENTED_EDGE('',*,*,#10303,.F.);\r
+-#10305=ORIENTED_EDGE('',*,*,#5770,.F.);\r
+-#10306=EDGE_LOOP('',(#10301,#10302,#10304,#10305));\r
+-#10307=FACE_OUTER_BOUND('',#10306,.F.);\r
+-#10308=ADVANCED_FACE('',(#10307),#10300,.F.);\r
+-#10309=CARTESIAN_POINT('',(-4.375E-1,-6.892397422826E-2,9.565E0));\r
+-#10310=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10311=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10312=AXIS2_PLACEMENT_3D('',#10309,#10310,#10311);\r
+-#10313=CYLINDRICAL_SURFACE('',#10312,8.75E-1);\r
+-#10315=ORIENTED_EDGE('',*,*,#10314,.F.);\r
+-#10316=ORIENTED_EDGE('',*,*,#5772,.T.);\r
+-#10317=ORIENTED_EDGE('',*,*,#10303,.T.);\r
+-#10318=ORIENTED_EDGE('',*,*,#10162,.T.);\r
+-#10319=EDGE_LOOP('',(#10315,#10316,#10317,#10318));\r
+-#10320=FACE_OUTER_BOUND('',#10319,.F.);\r
+-#10321=ADVANCED_FACE('',(#10320),#10313,.F.);\r
+-#10322=CARTESIAN_POINT('',(-1.3125E0,0.E0,8.69E0));\r
+-#10323=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10324=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10325=AXIS2_PLACEMENT_3D('',#10322,#10323,#10324);\r
+-#10326=PLANE('',#10325);\r
+-#10327=ORIENTED_EDGE('',*,*,#10124,.T.);\r
+-#10328=ORIENTED_EDGE('',*,*,#5774,.F.);\r
+-#10329=ORIENTED_EDGE('',*,*,#10314,.T.);\r
+-#10330=ORIENTED_EDGE('',*,*,#10160,.T.);\r
+-#10331=EDGE_LOOP('',(#10327,#10328,#10329,#10330));\r
+-#10332=FACE_OUTER_BOUND('',#10331,.F.);\r
+-#10333=ADVANCED_FACE('',(#10332),#10326,.F.);\r
+-#10334=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));\r
+-#10335=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10336=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10337=AXIS2_PLACEMENT_3D('',#10334,#10335,#10336);\r
+-#10338=PLANE('',#10337);\r
+-#10339=ORIENTED_EDGE('',*,*,#5778,.F.);\r
+-#10341=ORIENTED_EDGE('',*,*,#10340,.T.);\r
+-#10343=ORIENTED_EDGE('',*,*,#10342,.T.);\r
+-#10345=ORIENTED_EDGE('',*,*,#10344,.F.);\r
+-#10346=EDGE_LOOP('',(#10339,#10341,#10343,#10345));\r
+-#10347=FACE_OUTER_BOUND('',#10346,.F.);\r
+-#10348=ADVANCED_FACE('',(#10347),#10338,.F.);\r
+-#10349=CARTESIAN_POINT('',(1.25E0,0.E0,1.65E1));\r
+-#10350=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10351=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10352=AXIS2_PLACEMENT_3D('',#10349,#10350,#10351);\r
+-#10353=CYLINDRICAL_SURFACE('',#10352,5.625E-1);\r
+-#10354=ORIENTED_EDGE('',*,*,#5784,.F.);\r
+-#10356=ORIENTED_EDGE('',*,*,#10355,.T.);\r
+-#10358=ORIENTED_EDGE('',*,*,#10357,.T.);\r
+-#10359=ORIENTED_EDGE('',*,*,#10340,.F.);\r
+-#10360=EDGE_LOOP('',(#10354,#10356,#10358,#10359));\r
+-#10361=FACE_OUTER_BOUND('',#10360,.F.);\r
+-#10362=ADVANCED_FACE('',(#10361),#10353,.F.);\r
+-#10363=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));\r
+-#10364=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10365=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10366=AXIS2_PLACEMENT_3D('',#10363,#10364,#10365);\r
+-#10367=PLANE('',#10366);\r
+-#10368=ORIENTED_EDGE('',*,*,#5782,.F.);\r
+-#10370=ORIENTED_EDGE('',*,*,#10369,.T.);\r
+-#10372=ORIENTED_EDGE('',*,*,#10371,.T.);\r
+-#10373=ORIENTED_EDGE('',*,*,#10355,.F.);\r
+-#10374=EDGE_LOOP('',(#10368,#10370,#10372,#10373));\r
+-#10375=FACE_OUTER_BOUND('',#10374,.F.);\r
+-#10376=ADVANCED_FACE('',(#10375),#10367,.F.);\r
+-#10377=CARTESIAN_POINT('',(1.25E0,0.E0,1.35E1));\r
+-#10378=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10379=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10380=AXIS2_PLACEMENT_3D('',#10377,#10378,#10379);\r
+-#10381=CYLINDRICAL_SURFACE('',#10380,5.625E-1);\r
+-#10382=ORIENTED_EDGE('',*,*,#5780,.F.);\r
+-#10383=ORIENTED_EDGE('',*,*,#10344,.T.);\r
+-#10385=ORIENTED_EDGE('',*,*,#10384,.T.);\r
+-#10386=ORIENTED_EDGE('',*,*,#10369,.F.);\r
+-#10387=EDGE_LOOP('',(#10382,#10383,#10385,#10386));\r
+-#10388=FACE_OUTER_BOUND('',#10387,.F.);\r
+-#10389=ADVANCED_FACE('',(#10388),#10381,.F.);\r
+-#10390=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10391=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10392=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10393=AXIS2_PLACEMENT_3D('',#10390,#10391,#10392);\r
+-#10394=PLANE('',#10393);\r
+-#10395=ORIENTED_EDGE('',*,*,#10342,.F.);\r
+-#10396=ORIENTED_EDGE('',*,*,#10357,.F.);\r
+-#10397=ORIENTED_EDGE('',*,*,#10371,.F.);\r
+-#10398=ORIENTED_EDGE('',*,*,#10384,.F.);\r
+-#10399=EDGE_LOOP('',(#10395,#10396,#10397,#10398));\r
+-#10400=FACE_OUTER_BOUND('',#10399,.F.);\r
+-#10401=ADVANCED_FACE('',(#10400),#10394,.T.);\r
+-#10402=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));\r
+-#10403=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10404=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10405=AXIS2_PLACEMENT_3D('',#10402,#10403,#10404);\r
+-#10406=PLANE('',#10405);\r
+-#10407=ORIENTED_EDGE('',*,*,#5788,.F.);\r
+-#10409=ORIENTED_EDGE('',*,*,#10408,.T.);\r
+-#10411=ORIENTED_EDGE('',*,*,#10410,.T.);\r
+-#10413=ORIENTED_EDGE('',*,*,#10412,.F.);\r
+-#10414=EDGE_LOOP('',(#10407,#10409,#10411,#10413));\r
+-#10415=FACE_OUTER_BOUND('',#10414,.F.);\r
+-#10416=ADVANCED_FACE('',(#10415),#10406,.F.);\r
+-#10417=CARTESIAN_POINT('',(1.25E0,0.E0,2.25E1));\r
+-#10418=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10419=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10420=AXIS2_PLACEMENT_3D('',#10417,#10418,#10419);\r
+-#10421=CYLINDRICAL_SURFACE('',#10420,5.625E-1);\r
+-#10422=ORIENTED_EDGE('',*,*,#5794,.F.);\r
+-#10424=ORIENTED_EDGE('',*,*,#10423,.T.);\r
+-#10426=ORIENTED_EDGE('',*,*,#10425,.T.);\r
+-#10427=ORIENTED_EDGE('',*,*,#10408,.F.);\r
+-#10428=EDGE_LOOP('',(#10422,#10424,#10426,#10427));\r
+-#10429=FACE_OUTER_BOUND('',#10428,.F.);\r
+-#10430=ADVANCED_FACE('',(#10429),#10421,.F.);\r
+-#10431=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));\r
+-#10432=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10433=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10434=AXIS2_PLACEMENT_3D('',#10431,#10432,#10433);\r
+-#10435=PLANE('',#10434);\r
+-#10436=ORIENTED_EDGE('',*,*,#5792,.F.);\r
+-#10438=ORIENTED_EDGE('',*,*,#10437,.T.);\r
+-#10440=ORIENTED_EDGE('',*,*,#10439,.T.);\r
+-#10441=ORIENTED_EDGE('',*,*,#10423,.F.);\r
+-#10442=EDGE_LOOP('',(#10436,#10438,#10440,#10441));\r
+-#10443=FACE_OUTER_BOUND('',#10442,.F.);\r
+-#10444=ADVANCED_FACE('',(#10443),#10435,.F.);\r
+-#10445=CARTESIAN_POINT('',(1.25E0,0.E0,1.95E1));\r
+-#10446=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10447=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10448=AXIS2_PLACEMENT_3D('',#10445,#10446,#10447);\r
+-#10449=CYLINDRICAL_SURFACE('',#10448,5.625E-1);\r
+-#10450=ORIENTED_EDGE('',*,*,#5790,.F.);\r
+-#10451=ORIENTED_EDGE('',*,*,#10412,.T.);\r
+-#10453=ORIENTED_EDGE('',*,*,#10452,.T.);\r
+-#10454=ORIENTED_EDGE('',*,*,#10437,.F.);\r
+-#10455=EDGE_LOOP('',(#10450,#10451,#10453,#10454));\r
+-#10456=FACE_OUTER_BOUND('',#10455,.F.);\r
+-#10457=ADVANCED_FACE('',(#10456),#10449,.F.);\r
+-#10458=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10459=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10460=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10461=AXIS2_PLACEMENT_3D('',#10458,#10459,#10460);\r
+-#10462=PLANE('',#10461);\r
+-#10463=ORIENTED_EDGE('',*,*,#10410,.F.);\r
+-#10464=ORIENTED_EDGE('',*,*,#10425,.F.);\r
+-#10465=ORIENTED_EDGE('',*,*,#10439,.F.);\r
+-#10466=ORIENTED_EDGE('',*,*,#10452,.F.);\r
+-#10467=EDGE_LOOP('',(#10463,#10464,#10465,#10466));\r
+-#10468=FACE_OUTER_BOUND('',#10467,.F.);\r
+-#10469=ADVANCED_FACE('',(#10468),#10462,.T.);\r
+-#10470=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));\r
+-#10471=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10472=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10473=AXIS2_PLACEMENT_3D('',#10470,#10471,#10472);\r
+-#10474=PLANE('',#10473);\r
+-#10475=ORIENTED_EDGE('',*,*,#5798,.F.);\r
+-#10477=ORIENTED_EDGE('',*,*,#10476,.T.);\r
+-#10479=ORIENTED_EDGE('',*,*,#10478,.T.);\r
+-#10481=ORIENTED_EDGE('',*,*,#10480,.F.);\r
+-#10482=EDGE_LOOP('',(#10475,#10477,#10479,#10481));\r
+-#10483=FACE_OUTER_BOUND('',#10482,.F.);\r
+-#10484=ADVANCED_FACE('',(#10483),#10474,.F.);\r
+-#10485=CARTESIAN_POINT('',(7.5E0,0.E0,9.E0));\r
+-#10486=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10487=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10488=AXIS2_PLACEMENT_3D('',#10485,#10486,#10487);\r
+-#10489=CYLINDRICAL_SURFACE('',#10488,5.E-1);\r
+-#10490=ORIENTED_EDGE('',*,*,#5804,.F.);\r
+-#10492=ORIENTED_EDGE('',*,*,#10491,.T.);\r
+-#10494=ORIENTED_EDGE('',*,*,#10493,.T.);\r
+-#10495=ORIENTED_EDGE('',*,*,#10476,.F.);\r
+-#10496=EDGE_LOOP('',(#10490,#10492,#10494,#10495));\r
+-#10497=FACE_OUTER_BOUND('',#10496,.F.);\r
+-#10498=ADVANCED_FACE('',(#10497),#10489,.F.);\r
+-#10499=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));\r
+-#10500=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10501=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10502=AXIS2_PLACEMENT_3D('',#10499,#10500,#10501);\r
+-#10503=PLANE('',#10502);\r
+-#10504=ORIENTED_EDGE('',*,*,#5802,.F.);\r
+-#10506=ORIENTED_EDGE('',*,*,#10505,.T.);\r
+-#10508=ORIENTED_EDGE('',*,*,#10507,.T.);\r
+-#10509=ORIENTED_EDGE('',*,*,#10491,.F.);\r
+-#10510=EDGE_LOOP('',(#10504,#10506,#10508,#10509));\r
+-#10511=FACE_OUTER_BOUND('',#10510,.F.);\r
+-#10512=ADVANCED_FACE('',(#10511),#10503,.F.);\r
+-#10513=CARTESIAN_POINT('',(1.05E1,0.E0,9.E0));\r
+-#10514=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10515=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10516=AXIS2_PLACEMENT_3D('',#10513,#10514,#10515);\r
+-#10517=CYLINDRICAL_SURFACE('',#10516,5.E-1);\r
+-#10518=ORIENTED_EDGE('',*,*,#5800,.F.);\r
+-#10519=ORIENTED_EDGE('',*,*,#10480,.T.);\r
+-#10521=ORIENTED_EDGE('',*,*,#10520,.T.);\r
+-#10522=ORIENTED_EDGE('',*,*,#10505,.F.);\r
+-#10523=EDGE_LOOP('',(#10518,#10519,#10521,#10522));\r
+-#10524=FACE_OUTER_BOUND('',#10523,.F.);\r
+-#10525=ADVANCED_FACE('',(#10524),#10517,.F.);\r
+-#10526=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10527=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10528=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10529=AXIS2_PLACEMENT_3D('',#10526,#10527,#10528);\r
+-#10530=PLANE('',#10529);\r
+-#10531=ORIENTED_EDGE('',*,*,#10478,.F.);\r
+-#10532=ORIENTED_EDGE('',*,*,#10493,.F.);\r
+-#10533=ORIENTED_EDGE('',*,*,#10507,.F.);\r
+-#10534=ORIENTED_EDGE('',*,*,#10520,.F.);\r
+-#10535=EDGE_LOOP('',(#10531,#10532,#10533,#10534));\r
+-#10536=FACE_OUTER_BOUND('',#10535,.F.);\r
+-#10537=ADVANCED_FACE('',(#10536),#10530,.T.);\r
+-#10538=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));\r
+-#10539=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10540=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10541=AXIS2_PLACEMENT_3D('',#10538,#10539,#10540);\r
+-#10542=PLANE('',#10541);\r
+-#10543=ORIENTED_EDGE('',*,*,#5808,.F.);\r
+-#10545=ORIENTED_EDGE('',*,*,#10544,.T.);\r
+-#10547=ORIENTED_EDGE('',*,*,#10546,.T.);\r
+-#10549=ORIENTED_EDGE('',*,*,#10548,.F.);\r
+-#10550=EDGE_LOOP('',(#10543,#10545,#10547,#10549));\r
+-#10551=FACE_OUTER_BOUND('',#10550,.F.);\r
+-#10552=ADVANCED_FACE('',(#10551),#10542,.F.);\r
+-#10553=CARTESIAN_POINT('',(7.5E0,0.E0,1.8E1));\r
+-#10554=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10555=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10556=AXIS2_PLACEMENT_3D('',#10553,#10554,#10555);\r
+-#10557=CYLINDRICAL_SURFACE('',#10556,4.375E-1);\r
+-#10558=ORIENTED_EDGE('',*,*,#5814,.F.);\r
+-#10560=ORIENTED_EDGE('',*,*,#10559,.T.);\r
+-#10562=ORIENTED_EDGE('',*,*,#10561,.T.);\r
+-#10563=ORIENTED_EDGE('',*,*,#10544,.F.);\r
+-#10564=EDGE_LOOP('',(#10558,#10560,#10562,#10563));\r
+-#10565=FACE_OUTER_BOUND('',#10564,.F.);\r
+-#10566=ADVANCED_FACE('',(#10565),#10557,.F.);\r
+-#10567=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));\r
+-#10568=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10569=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10570=AXIS2_PLACEMENT_3D('',#10567,#10568,#10569);\r
+-#10571=PLANE('',#10570);\r
+-#10572=ORIENTED_EDGE('',*,*,#5812,.F.);\r
+-#10574=ORIENTED_EDGE('',*,*,#10573,.T.);\r
+-#10576=ORIENTED_EDGE('',*,*,#10575,.T.);\r
+-#10577=ORIENTED_EDGE('',*,*,#10559,.F.);\r
+-#10578=EDGE_LOOP('',(#10572,#10574,#10576,#10577));\r
+-#10579=FACE_OUTER_BOUND('',#10578,.F.);\r
+-#10580=ADVANCED_FACE('',(#10579),#10571,.F.);\r
+-#10581=CARTESIAN_POINT('',(1.05E1,0.E0,1.8E1));\r
+-#10582=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10583=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10584=AXIS2_PLACEMENT_3D('',#10581,#10582,#10583);\r
+-#10585=CYLINDRICAL_SURFACE('',#10584,4.375E-1);\r
+-#10586=ORIENTED_EDGE('',*,*,#5810,.F.);\r
+-#10587=ORIENTED_EDGE('',*,*,#10548,.T.);\r
+-#10589=ORIENTED_EDGE('',*,*,#10588,.T.);\r
+-#10590=ORIENTED_EDGE('',*,*,#10573,.F.);\r
+-#10591=EDGE_LOOP('',(#10586,#10587,#10589,#10590));\r
+-#10592=FACE_OUTER_BOUND('',#10591,.F.);\r
+-#10593=ADVANCED_FACE('',(#10592),#10585,.F.);\r
+-#10594=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));\r
+-#10595=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#10596=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10597=AXIS2_PLACEMENT_3D('',#10594,#10595,#10596);\r
+-#10598=PLANE('',#10597);\r
+-#10599=ORIENTED_EDGE('',*,*,#10546,.F.);\r
+-#10600=ORIENTED_EDGE('',*,*,#10561,.F.);\r
+-#10601=ORIENTED_EDGE('',*,*,#10575,.F.);\r
+-#10602=ORIENTED_EDGE('',*,*,#10588,.F.);\r
+-#10603=EDGE_LOOP('',(#10599,#10600,#10601,#10602));\r
+-#10604=FACE_OUTER_BOUND('',#10603,.F.);\r
+-#10605=ADVANCED_FACE('',(#10604),#10598,.T.);\r
+-#10606=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));\r
+-#10607=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10608=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10609=AXIS2_PLACEMENT_3D('',#10606,#10607,#10608);\r
+-#10610=PLANE('',#10609);\r
+-#10611=ORIENTED_EDGE('',*,*,#5818,.T.);\r
+-#10613=ORIENTED_EDGE('',*,*,#10612,.T.);\r
+-#10615=ORIENTED_EDGE('',*,*,#10614,.F.);\r
+-#10617=ORIENTED_EDGE('',*,*,#10616,.F.);\r
+-#10618=EDGE_LOOP('',(#10611,#10613,#10615,#10617));\r
+-#10619=FACE_OUTER_BOUND('',#10618,.F.);\r
+-#10620=ADVANCED_FACE('',(#10619),#10610,.T.);\r
+-#10621=CARTESIAN_POINT('',(1.05E1,0.E0,3.075E1));\r
+-#10622=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10623=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10624=AXIS2_PLACEMENT_3D('',#10621,#10622,#10623);\r
+-#10625=CYLINDRICAL_SURFACE('',#10624,5.625E-1);\r
+-#10626=ORIENTED_EDGE('',*,*,#5824,.T.);\r
+-#10628=ORIENTED_EDGE('',*,*,#10627,.T.);\r
+-#10630=ORIENTED_EDGE('',*,*,#10629,.F.);\r
+-#10631=ORIENTED_EDGE('',*,*,#10612,.F.);\r
+-#10632=EDGE_LOOP('',(#10626,#10628,#10630,#10631));\r
+-#10633=FACE_OUTER_BOUND('',#10632,.F.);\r
+-#10634=ADVANCED_FACE('',(#10633),#10625,.F.);\r
+-#10635=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));\r
+-#10636=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10637=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10638=AXIS2_PLACEMENT_3D('',#10635,#10636,#10637);\r
+-#10639=PLANE('',#10638);\r
+-#10640=ORIENTED_EDGE('',*,*,#5822,.T.);\r
+-#10642=ORIENTED_EDGE('',*,*,#10641,.T.);\r
+-#10644=ORIENTED_EDGE('',*,*,#10643,.F.);\r
+-#10645=ORIENTED_EDGE('',*,*,#10627,.F.);\r
+-#10646=EDGE_LOOP('',(#10640,#10642,#10644,#10645));\r
+-#10647=FACE_OUTER_BOUND('',#10646,.F.);\r
+-#10648=ADVANCED_FACE('',(#10647),#10639,.T.);\r
+-#10649=CARTESIAN_POINT('',(7.5E0,0.E0,3.075E1));\r
+-#10650=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10651=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10652=AXIS2_PLACEMENT_3D('',#10649,#10650,#10651);\r
+-#10653=CYLINDRICAL_SURFACE('',#10652,5.625E-1);\r
+-#10654=ORIENTED_EDGE('',*,*,#5820,.T.);\r
+-#10655=ORIENTED_EDGE('',*,*,#10616,.T.);\r
+-#10657=ORIENTED_EDGE('',*,*,#10656,.F.);\r
+-#10658=ORIENTED_EDGE('',*,*,#10641,.F.);\r
+-#10659=EDGE_LOOP('',(#10654,#10655,#10657,#10658));\r
+-#10660=FACE_OUTER_BOUND('',#10659,.F.);\r
+-#10661=ADVANCED_FACE('',(#10660),#10653,.F.);\r
+-#10662=CARTESIAN_POINT('',(0.E0,6.875E-1,3.2E1));\r
+-#10663=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10664=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10665=AXIS2_PLACEMENT_3D('',#10662,#10663,#10664);\r
+-#10666=PLANE('',#10665);\r
+-#10667=ORIENTED_EDGE('',*,*,#10614,.T.);\r
+-#10668=ORIENTED_EDGE('',*,*,#10629,.T.);\r
+-#10669=ORIENTED_EDGE('',*,*,#10643,.T.);\r
+-#10670=ORIENTED_EDGE('',*,*,#10656,.T.);\r
+-#10671=EDGE_LOOP('',(#10667,#10668,#10669,#10670));\r
+-#10672=FACE_OUTER_BOUND('',#10671,.F.);\r
+-#10673=ADVANCED_FACE('',(#10672),#10666,.F.);\r
+-#10674=CARTESIAN_POINT('',(0.E0,6.875E-1,3.2E1));\r
+-#10675=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10676=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10677=AXIS2_PLACEMENT_3D('',#10674,#10675,#10676);\r
+-#10678=PLANE('',#10677);\r
+-#10680=ORIENTED_EDGE('',*,*,#10679,.F.);\r
+-#10682=ORIENTED_EDGE('',*,*,#10681,.T.);\r
+-#10684=ORIENTED_EDGE('',*,*,#10683,.T.);\r
+-#10686=ORIENTED_EDGE('',*,*,#10685,.T.);\r
+-#10688=ORIENTED_EDGE('',*,*,#10687,.T.);\r
+-#10689=EDGE_LOOP('',(#10680,#10682,#10684,#10686,#10688));\r
+-#10690=FACE_OUTER_BOUND('',#10689,.F.);\r
+-#10691=ADVANCED_FACE('',(#10690),#10678,.F.);\r
+-#10692=CARTESIAN_POINT('',(1.455736763592E0,-6.642389448824E-2,\r
+-2.742280476768E1));\r
+-#10693=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10694=DIRECTION('',(-8.942796313519E-1,0.E0,-4.475085931567E-1));\r
+-#10695=AXIS2_PLACEMENT_3D('',#10692,#10693,#10694);\r
+-#10696=CYLINDRICAL_SURFACE('',#10695,7.5E-1);\r
+-#10698=ORIENTED_EDGE('',*,*,#10697,.F.);\r
+-#10699=ORIENTED_EDGE('',*,*,#5932,.T.);\r
+-#10701=ORIENTED_EDGE('',*,*,#10700,.T.);\r
+-#10702=ORIENTED_EDGE('',*,*,#10679,.T.);\r
+-#10703=EDGE_LOOP('',(#10698,#10699,#10701,#10702));\r
+-#10704=FACE_OUTER_BOUND('',#10703,.F.);\r
+-#10705=ADVANCED_FACE('',(#10704),#10696,.F.);\r
+-#10706=CARTESIAN_POINT('',(1.61E0,0.E0,2.75E1));\r
+-#10707=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10708=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10709=AXIS2_PLACEMENT_3D('',#10706,#10707,#10708);\r
+-#10710=CYLINDRICAL_SURFACE('',#10709,9.225E-1);\r
+-#10711=ORIENTED_EDGE('',*,*,#10697,.T.);\r
+-#10712=ORIENTED_EDGE('',*,*,#10687,.F.);\r
+-#10714=ORIENTED_EDGE('',*,*,#10713,.F.);\r
+-#10715=ORIENTED_EDGE('',*,*,#5934,.T.);\r
+-#10716=EDGE_LOOP('',(#10711,#10712,#10714,#10715));\r
+-#10717=FACE_OUTER_BOUND('',#10716,.F.);\r
+-#10718=ADVANCED_FACE('',(#10717),#10710,.F.);\r
+-#10719=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));\r
+-#10720=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10721=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10722=AXIS2_PLACEMENT_3D('',#10719,#10720,#10721);\r
+-#10723=CYLINDRICAL_SURFACE('',#10722,5.6875E0);\r
+-#10724=ORIENTED_EDGE('',*,*,#5936,.F.);\r
+-#10725=ORIENTED_EDGE('',*,*,#10713,.T.);\r
+-#10726=ORIENTED_EDGE('',*,*,#10685,.F.);\r
+-#10728=ORIENTED_EDGE('',*,*,#10727,.F.);\r
+-#10729=EDGE_LOOP('',(#10724,#10725,#10726,#10728));\r
+-#10730=FACE_OUTER_BOUND('',#10729,.F.);\r
+-#10731=ADVANCED_FACE('',(#10730),#10723,.T.);\r
+-#10732=CARTESIAN_POINT('',(4.553039342392E0,0.E0,3.035464591145E1));\r
+-#10733=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10734=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10735=AXIS2_PLACEMENT_3D('',#10732,#10733,#10734);\r
+-#10736=CYLINDRICAL_SURFACE('',#10735,8.669989027347E-1);\r
+-#10737=ORIENTED_EDGE('',*,*,#5938,.T.);\r
+-#10738=ORIENTED_EDGE('',*,*,#10727,.T.);\r
+-#10739=ORIENTED_EDGE('',*,*,#10683,.F.);\r
+-#10741=ORIENTED_EDGE('',*,*,#10740,.F.);\r
+-#10742=EDGE_LOOP('',(#10737,#10738,#10739,#10741));\r
+-#10743=FACE_OUTER_BOUND('',#10742,.F.);\r
+-#10744=ADVANCED_FACE('',(#10743),#10736,.F.);\r
+-#10745=CARTESIAN_POINT('',(6.875E-1,0.E0,2.771522817587E1));\r
+-#10746=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#10747=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#10748=AXIS2_PLACEMENT_3D('',#10745,#10746,#10747);\r
+-#10749=PLANE('',#10748);\r
+-#10750=ORIENTED_EDGE('',*,*,#10700,.F.);\r
+-#10751=ORIENTED_EDGE('',*,*,#5930,.T.);\r
+-#10752=ORIENTED_EDGE('',*,*,#10740,.T.);\r
+-#10753=ORIENTED_EDGE('',*,*,#10681,.F.);\r
+-#10754=EDGE_LOOP('',(#10750,#10751,#10752,#10753));\r
+-#10755=FACE_OUTER_BOUND('',#10754,.F.);\r
+-#10756=ADVANCED_FACE('',(#10755),#10749,.T.);\r
+-#10757=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));\r
+-#10758=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10759=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10760=AXIS2_PLACEMENT_3D('',#10757,#10758,#10759);\r
+-#10761=PLANE('',#10760);\r
+-#10762=ORIENTED_EDGE('',*,*,#5828,.T.);\r
+-#10764=ORIENTED_EDGE('',*,*,#10763,.T.);\r
+-#10766=ORIENTED_EDGE('',*,*,#10765,.F.);\r
+-#10768=ORIENTED_EDGE('',*,*,#10767,.F.);\r
+-#10769=EDGE_LOOP('',(#10762,#10764,#10766,#10768));\r
+-#10770=FACE_OUTER_BOUND('',#10769,.F.);\r
+-#10771=ADVANCED_FACE('',(#10770),#10761,.T.);\r
+-#10772=CARTESIAN_POINT('',(1.35E1,0.E0,1.25E0));\r
+-#10773=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10774=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10775=AXIS2_PLACEMENT_3D('',#10772,#10773,#10774);\r
+-#10776=CYLINDRICAL_SURFACE('',#10775,5.625E-1);\r
+-#10777=ORIENTED_EDGE('',*,*,#5834,.T.);\r
+-#10779=ORIENTED_EDGE('',*,*,#10778,.T.);\r
+-#10781=ORIENTED_EDGE('',*,*,#10780,.F.);\r
+-#10782=ORIENTED_EDGE('',*,*,#10763,.F.);\r
+-#10783=EDGE_LOOP('',(#10777,#10779,#10781,#10782));\r
+-#10784=FACE_OUTER_BOUND('',#10783,.F.);\r
+-#10785=ADVANCED_FACE('',(#10784),#10776,.F.);\r
+-#10786=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));\r
+-#10787=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10788=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10789=AXIS2_PLACEMENT_3D('',#10786,#10787,#10788);\r
+-#10790=PLANE('',#10789);\r
+-#10791=ORIENTED_EDGE('',*,*,#5832,.T.);\r
+-#10793=ORIENTED_EDGE('',*,*,#10792,.T.);\r
+-#10795=ORIENTED_EDGE('',*,*,#10794,.F.);\r
+-#10796=ORIENTED_EDGE('',*,*,#10778,.F.);\r
+-#10797=EDGE_LOOP('',(#10791,#10793,#10795,#10796));\r
+-#10798=FACE_OUTER_BOUND('',#10797,.F.);\r
+-#10799=ADVANCED_FACE('',(#10798),#10790,.T.);\r
+-#10800=CARTESIAN_POINT('',(1.65E1,0.E0,1.25E0));\r
+-#10801=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10802=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10803=AXIS2_PLACEMENT_3D('',#10800,#10801,#10802);\r
+-#10804=CYLINDRICAL_SURFACE('',#10803,5.625E-1);\r
+-#10805=ORIENTED_EDGE('',*,*,#5830,.T.);\r
+-#10806=ORIENTED_EDGE('',*,*,#10767,.T.);\r
+-#10808=ORIENTED_EDGE('',*,*,#10807,.F.);\r
+-#10809=ORIENTED_EDGE('',*,*,#10792,.F.);\r
+-#10810=EDGE_LOOP('',(#10805,#10806,#10808,#10809));\r
+-#10811=FACE_OUTER_BOUND('',#10810,.F.);\r
+-#10812=ADVANCED_FACE('',(#10811),#10804,.F.);\r
+-#10813=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#10814=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10815=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10816=AXIS2_PLACEMENT_3D('',#10813,#10814,#10815);\r
+-#10817=PLANE('',#10816);\r
+-#10818=ORIENTED_EDGE('',*,*,#10765,.T.);\r
+-#10819=ORIENTED_EDGE('',*,*,#10780,.T.);\r
+-#10820=ORIENTED_EDGE('',*,*,#10794,.T.);\r
+-#10821=ORIENTED_EDGE('',*,*,#10807,.T.);\r
+-#10822=EDGE_LOOP('',(#10818,#10819,#10820,#10821));\r
+-#10823=FACE_OUTER_BOUND('',#10822,.F.);\r
+-#10824=ADVANCED_FACE('',(#10823),#10817,.F.);\r
+-#10825=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#10826=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10827=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10828=AXIS2_PLACEMENT_3D('',#10825,#10826,#10827);\r
+-#10829=PLANE('',#10828);\r
+-#10831=ORIENTED_EDGE('',*,*,#10830,.F.);\r
+-#10833=ORIENTED_EDGE('',*,*,#10832,.T.);\r
+-#10835=ORIENTED_EDGE('',*,*,#10834,.T.);\r
+-#10837=ORIENTED_EDGE('',*,*,#10836,.T.);\r
+-#10839=ORIENTED_EDGE('',*,*,#10838,.T.);\r
+-#10840=EDGE_LOOP('',(#10831,#10833,#10835,#10837,#10839));\r
+-#10841=FACE_OUTER_BOUND('',#10840,.F.);\r
+-#10842=ADVANCED_FACE('',(#10841),#10829,.F.);\r
+-#10843=CARTESIAN_POINT('',(2.254426323641E1,-6.642389448824E-2,\r
+-4.577195232320E0));\r
+-#10844=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10845=DIRECTION('',(8.942796313519E-1,0.E0,4.475085931567E-1));\r
+-#10846=AXIS2_PLACEMENT_3D('',#10843,#10844,#10845);\r
+-#10847=CYLINDRICAL_SURFACE('',#10846,7.5E-1);\r
+-#10849=ORIENTED_EDGE('',*,*,#10848,.F.);\r
+-#10850=ORIENTED_EDGE('',*,*,#5920,.T.);\r
+-#10852=ORIENTED_EDGE('',*,*,#10851,.T.);\r
+-#10853=ORIENTED_EDGE('',*,*,#10830,.T.);\r
+-#10854=EDGE_LOOP('',(#10849,#10850,#10852,#10853));\r
+-#10855=FACE_OUTER_BOUND('',#10854,.F.);\r
+-#10856=ADVANCED_FACE('',(#10855),#10847,.F.);\r
+-#10857=CARTESIAN_POINT('',(2.239E1,0.E0,4.5E0));\r
+-#10858=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10859=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10860=AXIS2_PLACEMENT_3D('',#10857,#10858,#10859);\r
+-#10861=CYLINDRICAL_SURFACE('',#10860,9.225E-1);\r
+-#10862=ORIENTED_EDGE('',*,*,#10848,.T.);\r
+-#10863=ORIENTED_EDGE('',*,*,#10838,.F.);\r
+-#10865=ORIENTED_EDGE('',*,*,#10864,.F.);\r
+-#10866=ORIENTED_EDGE('',*,*,#5922,.T.);\r
+-#10867=EDGE_LOOP('',(#10862,#10863,#10865,#10866));\r
+-#10868=FACE_OUTER_BOUND('',#10867,.F.);\r
+-#10869=ADVANCED_FACE('',(#10868),#10861,.F.);\r
+-#10870=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));\r
+-#10871=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10872=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10873=AXIS2_PLACEMENT_3D('',#10870,#10871,#10872);\r
+-#10874=CYLINDRICAL_SURFACE('',#10873,5.6875E0);\r
+-#10875=ORIENTED_EDGE('',*,*,#5924,.F.);\r
+-#10876=ORIENTED_EDGE('',*,*,#10864,.T.);\r
+-#10877=ORIENTED_EDGE('',*,*,#10836,.F.);\r
+-#10879=ORIENTED_EDGE('',*,*,#10878,.F.);\r
+-#10880=EDGE_LOOP('',(#10875,#10876,#10877,#10879));\r
+-#10881=FACE_OUTER_BOUND('',#10880,.F.);\r
+-#10882=ADVANCED_FACE('',(#10881),#10874,.T.);\r
+-#10883=CARTESIAN_POINT('',(1.944696065761E1,0.E0,1.645354088550E0));\r
+-#10884=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10885=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10886=AXIS2_PLACEMENT_3D('',#10883,#10884,#10885);\r
+-#10887=CYLINDRICAL_SURFACE('',#10886,8.669989027347E-1);\r
+-#10888=ORIENTED_EDGE('',*,*,#5926,.T.);\r
+-#10889=ORIENTED_EDGE('',*,*,#10878,.T.);\r
+-#10890=ORIENTED_EDGE('',*,*,#10834,.F.);\r
+-#10892=ORIENTED_EDGE('',*,*,#10891,.F.);\r
+-#10893=EDGE_LOOP('',(#10888,#10889,#10890,#10892));\r
+-#10894=FACE_OUTER_BOUND('',#10893,.F.);\r
+-#10895=ADVANCED_FACE('',(#10894),#10887,.F.);\r
+-#10896=CARTESIAN_POINT('',(2.33125E1,0.E0,4.284771824132E0));\r
+-#10897=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#10898=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));\r
+-#10899=AXIS2_PLACEMENT_3D('',#10896,#10897,#10898);\r
+-#10900=PLANE('',#10899);\r
+-#10901=ORIENTED_EDGE('',*,*,#10851,.F.);\r
+-#10902=ORIENTED_EDGE('',*,*,#5918,.T.);\r
+-#10903=ORIENTED_EDGE('',*,*,#10891,.T.);\r
+-#10904=ORIENTED_EDGE('',*,*,#10832,.F.);\r
+-#10905=EDGE_LOOP('',(#10901,#10902,#10903,#10904));\r
+-#10906=FACE_OUTER_BOUND('',#10905,.F.);\r
+-#10907=ADVANCED_FACE('',(#10906),#10900,.T.);\r
+-#10908=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));\r
+-#10909=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10910=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10911=AXIS2_PLACEMENT_3D('',#10908,#10909,#10910);\r
+-#10912=PLANE('',#10911);\r
+-#10913=ORIENTED_EDGE('',*,*,#5838,.T.);\r
+-#10915=ORIENTED_EDGE('',*,*,#10914,.T.);\r
+-#10917=ORIENTED_EDGE('',*,*,#10916,.F.);\r
+-#10919=ORIENTED_EDGE('',*,*,#10918,.F.);\r
+-#10920=EDGE_LOOP('',(#10913,#10915,#10917,#10919));\r
+-#10921=FACE_OUTER_BOUND('',#10920,.F.);\r
+-#10922=ADVANCED_FACE('',(#10921),#10912,.T.);\r
+-#10923=CARTESIAN_POINT('',(2.275E1,0.E0,1.35E1));\r
+-#10924=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10925=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10926=AXIS2_PLACEMENT_3D('',#10923,#10924,#10925);\r
+-#10927=CYLINDRICAL_SURFACE('',#10926,5.625E-1);\r
+-#10928=ORIENTED_EDGE('',*,*,#5844,.T.);\r
+-#10930=ORIENTED_EDGE('',*,*,#10929,.T.);\r
+-#10932=ORIENTED_EDGE('',*,*,#10931,.F.);\r
+-#10933=ORIENTED_EDGE('',*,*,#10914,.F.);\r
+-#10934=EDGE_LOOP('',(#10928,#10930,#10932,#10933));\r
+-#10935=FACE_OUTER_BOUND('',#10934,.F.);\r
+-#10936=ADVANCED_FACE('',(#10935),#10927,.F.);\r
+-#10937=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));\r
+-#10938=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#10939=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#10940=AXIS2_PLACEMENT_3D('',#10937,#10938,#10939);\r
+-#10941=PLANE('',#10940);\r
+-#10942=ORIENTED_EDGE('',*,*,#5842,.T.);\r
+-#10944=ORIENTED_EDGE('',*,*,#10943,.T.);\r
+-#10946=ORIENTED_EDGE('',*,*,#10945,.F.);\r
+-#10947=ORIENTED_EDGE('',*,*,#10929,.F.);\r
+-#10948=EDGE_LOOP('',(#10942,#10944,#10946,#10947));\r
+-#10949=FACE_OUTER_BOUND('',#10948,.F.);\r
+-#10950=ADVANCED_FACE('',(#10949),#10941,.T.);\r
+-#10951=CARTESIAN_POINT('',(2.275E1,0.E0,1.65E1));\r
+-#10952=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10953=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10954=AXIS2_PLACEMENT_3D('',#10951,#10952,#10953);\r
+-#10955=CYLINDRICAL_SURFACE('',#10954,5.625E-1);\r
+-#10956=ORIENTED_EDGE('',*,*,#5840,.T.);\r
+-#10957=ORIENTED_EDGE('',*,*,#10918,.T.);\r
+-#10959=ORIENTED_EDGE('',*,*,#10958,.F.);\r
+-#10960=ORIENTED_EDGE('',*,*,#10943,.F.);\r
+-#10961=EDGE_LOOP('',(#10956,#10957,#10959,#10960));\r
+-#10962=FACE_OUTER_BOUND('',#10961,.F.);\r
+-#10963=ADVANCED_FACE('',(#10962),#10955,.F.);\r
+-#10964=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#10965=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10966=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10967=AXIS2_PLACEMENT_3D('',#10964,#10965,#10966);\r
+-#10968=PLANE('',#10967);\r
+-#10969=ORIENTED_EDGE('',*,*,#10916,.T.);\r
+-#10970=ORIENTED_EDGE('',*,*,#10931,.T.);\r
+-#10971=ORIENTED_EDGE('',*,*,#10945,.T.);\r
+-#10972=ORIENTED_EDGE('',*,*,#10958,.T.);\r
+-#10973=EDGE_LOOP('',(#10969,#10970,#10971,#10972));\r
+-#10974=FACE_OUTER_BOUND('',#10973,.F.);\r
+-#10975=ADVANCED_FACE('',(#10974),#10968,.F.);\r
+-#10976=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));\r
+-#10977=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10978=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#10979=AXIS2_PLACEMENT_3D('',#10976,#10977,#10978);\r
+-#10980=PLANE('',#10979);\r
+-#10981=ORIENTED_EDGE('',*,*,#5848,.T.);\r
+-#10983=ORIENTED_EDGE('',*,*,#10982,.T.);\r
+-#10985=ORIENTED_EDGE('',*,*,#10984,.F.);\r
+-#10987=ORIENTED_EDGE('',*,*,#10986,.F.);\r
+-#10988=EDGE_LOOP('',(#10981,#10983,#10985,#10987));\r
+-#10989=FACE_OUTER_BOUND('',#10988,.F.);\r
+-#10990=ADVANCED_FACE('',(#10989),#10980,.T.);\r
+-#10991=CARTESIAN_POINT('',(2.275E1,0.E0,1.95E1));\r
+-#10992=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#10993=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#10994=AXIS2_PLACEMENT_3D('',#10991,#10992,#10993);\r
+-#10995=CYLINDRICAL_SURFACE('',#10994,5.625E-1);\r
+-#10996=ORIENTED_EDGE('',*,*,#5854,.T.);\r
+-#10998=ORIENTED_EDGE('',*,*,#10997,.T.);\r
+-#11000=ORIENTED_EDGE('',*,*,#10999,.F.);\r
+-#11001=ORIENTED_EDGE('',*,*,#10982,.F.);\r
+-#11002=EDGE_LOOP('',(#10996,#10998,#11000,#11001));\r
+-#11003=FACE_OUTER_BOUND('',#11002,.F.);\r
+-#11004=ADVANCED_FACE('',(#11003),#10995,.F.);\r
+-#11005=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));\r
+-#11006=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11007=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11008=AXIS2_PLACEMENT_3D('',#11005,#11006,#11007);\r
+-#11009=PLANE('',#11008);\r
+-#11010=ORIENTED_EDGE('',*,*,#5852,.T.);\r
+-#11012=ORIENTED_EDGE('',*,*,#11011,.T.);\r
+-#11014=ORIENTED_EDGE('',*,*,#11013,.F.);\r
+-#11015=ORIENTED_EDGE('',*,*,#10997,.F.);\r
+-#11016=EDGE_LOOP('',(#11010,#11012,#11014,#11015));\r
+-#11017=FACE_OUTER_BOUND('',#11016,.F.);\r
+-#11018=ADVANCED_FACE('',(#11017),#11009,.T.);\r
+-#11019=CARTESIAN_POINT('',(2.275E1,0.E0,2.25E1));\r
+-#11020=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11021=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11022=AXIS2_PLACEMENT_3D('',#11019,#11020,#11021);\r
+-#11023=CYLINDRICAL_SURFACE('',#11022,5.625E-1);\r
+-#11024=ORIENTED_EDGE('',*,*,#5850,.T.);\r
+-#11025=ORIENTED_EDGE('',*,*,#10986,.T.);\r
+-#11027=ORIENTED_EDGE('',*,*,#11026,.F.);\r
+-#11028=ORIENTED_EDGE('',*,*,#11011,.F.);\r
+-#11029=EDGE_LOOP('',(#11024,#11025,#11027,#11028));\r
+-#11030=FACE_OUTER_BOUND('',#11029,.F.);\r
+-#11031=ADVANCED_FACE('',(#11030),#11023,.F.);\r
+-#11032=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#11033=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11034=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11035=AXIS2_PLACEMENT_3D('',#11032,#11033,#11034);\r
+-#11036=PLANE('',#11035);\r
+-#11037=ORIENTED_EDGE('',*,*,#10984,.T.);\r
+-#11038=ORIENTED_EDGE('',*,*,#10999,.T.);\r
+-#11039=ORIENTED_EDGE('',*,*,#11013,.T.);\r
+-#11040=ORIENTED_EDGE('',*,*,#11026,.T.);\r
+-#11041=EDGE_LOOP('',(#11037,#11038,#11039,#11040));\r
+-#11042=FACE_OUTER_BOUND('',#11041,.F.);\r
+-#11043=ADVANCED_FACE('',(#11042),#11036,.F.);\r
+-#11044=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));\r
+-#11045=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11046=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11047=AXIS2_PLACEMENT_3D('',#11044,#11045,#11046);\r
+-#11048=PLANE('',#11047);\r
+-#11049=ORIENTED_EDGE('',*,*,#5858,.T.);\r
+-#11051=ORIENTED_EDGE('',*,*,#11050,.T.);\r
+-#11053=ORIENTED_EDGE('',*,*,#11052,.F.);\r
+-#11055=ORIENTED_EDGE('',*,*,#11054,.F.);\r
+-#11056=EDGE_LOOP('',(#11049,#11051,#11053,#11055));\r
+-#11057=FACE_OUTER_BOUND('',#11056,.F.);\r
+-#11058=ADVANCED_FACE('',(#11057),#11048,.T.);\r
+-#11059=CARTESIAN_POINT('',(1.35E1,0.E0,9.E0));\r
+-#11060=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11061=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11062=AXIS2_PLACEMENT_3D('',#11059,#11060,#11061);\r
+-#11063=CYLINDRICAL_SURFACE('',#11062,5.E-1);\r
+-#11064=ORIENTED_EDGE('',*,*,#5864,.T.);\r
+-#11066=ORIENTED_EDGE('',*,*,#11065,.T.);\r
+-#11068=ORIENTED_EDGE('',*,*,#11067,.F.);\r
+-#11069=ORIENTED_EDGE('',*,*,#11050,.F.);\r
+-#11070=EDGE_LOOP('',(#11064,#11066,#11068,#11069));\r
+-#11071=FACE_OUTER_BOUND('',#11070,.F.);\r
+-#11072=ADVANCED_FACE('',(#11071),#11063,.F.);\r
+-#11073=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));\r
+-#11074=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11075=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11076=AXIS2_PLACEMENT_3D('',#11073,#11074,#11075);\r
+-#11077=PLANE('',#11076);\r
+-#11078=ORIENTED_EDGE('',*,*,#5862,.T.);\r
+-#11080=ORIENTED_EDGE('',*,*,#11079,.T.);\r
+-#11082=ORIENTED_EDGE('',*,*,#11081,.F.);\r
+-#11083=ORIENTED_EDGE('',*,*,#11065,.F.);\r
+-#11084=EDGE_LOOP('',(#11078,#11080,#11082,#11083));\r
+-#11085=FACE_OUTER_BOUND('',#11084,.F.);\r
+-#11086=ADVANCED_FACE('',(#11085),#11077,.T.);\r
+-#11087=CARTESIAN_POINT('',(1.65E1,0.E0,9.E0));\r
+-#11088=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11089=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11090=AXIS2_PLACEMENT_3D('',#11087,#11088,#11089);\r
+-#11091=CYLINDRICAL_SURFACE('',#11090,5.E-1);\r
+-#11092=ORIENTED_EDGE('',*,*,#5860,.T.);\r
+-#11093=ORIENTED_EDGE('',*,*,#11054,.T.);\r
+-#11095=ORIENTED_EDGE('',*,*,#11094,.F.);\r
+-#11096=ORIENTED_EDGE('',*,*,#11079,.F.);\r
+-#11097=EDGE_LOOP('',(#11092,#11093,#11095,#11096));\r
+-#11098=FACE_OUTER_BOUND('',#11097,.F.);\r
+-#11099=ADVANCED_FACE('',(#11098),#11091,.F.);\r
+-#11100=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#11101=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11102=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11103=AXIS2_PLACEMENT_3D('',#11100,#11101,#11102);\r
+-#11104=PLANE('',#11103);\r
+-#11105=ORIENTED_EDGE('',*,*,#11052,.T.);\r
+-#11106=ORIENTED_EDGE('',*,*,#11067,.T.);\r
+-#11107=ORIENTED_EDGE('',*,*,#11081,.T.);\r
+-#11108=ORIENTED_EDGE('',*,*,#11094,.T.);\r
+-#11109=EDGE_LOOP('',(#11105,#11106,#11107,#11108));\r
+-#11110=FACE_OUTER_BOUND('',#11109,.F.);\r
+-#11111=ADVANCED_FACE('',(#11110),#11104,.F.);\r
+-#11112=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));\r
+-#11113=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11114=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11115=AXIS2_PLACEMENT_3D('',#11112,#11113,#11114);\r
+-#11116=PLANE('',#11115);\r
+-#11117=ORIENTED_EDGE('',*,*,#5868,.T.);\r
+-#11119=ORIENTED_EDGE('',*,*,#11118,.T.);\r
+-#11121=ORIENTED_EDGE('',*,*,#11120,.F.);\r
+-#11123=ORIENTED_EDGE('',*,*,#11122,.F.);\r
+-#11124=EDGE_LOOP('',(#11117,#11119,#11121,#11123));\r
+-#11125=FACE_OUTER_BOUND('',#11124,.F.);\r
+-#11126=ADVANCED_FACE('',(#11125),#11116,.T.);\r
+-#11127=CARTESIAN_POINT('',(1.35E1,0.E0,1.8E1));\r
+-#11128=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11129=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11130=AXIS2_PLACEMENT_3D('',#11127,#11128,#11129);\r
+-#11131=CYLINDRICAL_SURFACE('',#11130,4.375E-1);\r
+-#11132=ORIENTED_EDGE('',*,*,#5874,.T.);\r
+-#11134=ORIENTED_EDGE('',*,*,#11133,.T.);\r
+-#11136=ORIENTED_EDGE('',*,*,#11135,.F.);\r
+-#11137=ORIENTED_EDGE('',*,*,#11118,.F.);\r
+-#11138=EDGE_LOOP('',(#11132,#11134,#11136,#11137));\r
+-#11139=FACE_OUTER_BOUND('',#11138,.F.);\r
+-#11140=ADVANCED_FACE('',(#11139),#11131,.F.);\r
+-#11141=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));\r
+-#11142=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11143=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11144=AXIS2_PLACEMENT_3D('',#11141,#11142,#11143);\r
+-#11145=PLANE('',#11144);\r
+-#11146=ORIENTED_EDGE('',*,*,#5872,.T.);\r
+-#11148=ORIENTED_EDGE('',*,*,#11147,.T.);\r
+-#11150=ORIENTED_EDGE('',*,*,#11149,.F.);\r
+-#11151=ORIENTED_EDGE('',*,*,#11133,.F.);\r
+-#11152=EDGE_LOOP('',(#11146,#11148,#11150,#11151));\r
+-#11153=FACE_OUTER_BOUND('',#11152,.F.);\r
+-#11154=ADVANCED_FACE('',(#11153),#11145,.T.);\r
+-#11155=CARTESIAN_POINT('',(1.65E1,0.E0,1.8E1));\r
+-#11156=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11157=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11158=AXIS2_PLACEMENT_3D('',#11155,#11156,#11157);\r
+-#11159=CYLINDRICAL_SURFACE('',#11158,4.375E-1);\r
+-#11160=ORIENTED_EDGE('',*,*,#5870,.T.);\r
+-#11161=ORIENTED_EDGE('',*,*,#11122,.T.);\r
+-#11163=ORIENTED_EDGE('',*,*,#11162,.F.);\r
+-#11164=ORIENTED_EDGE('',*,*,#11147,.F.);\r
+-#11165=EDGE_LOOP('',(#11160,#11161,#11163,#11164));\r
+-#11166=FACE_OUTER_BOUND('',#11165,.F.);\r
+-#11167=ADVANCED_FACE('',(#11166),#11159,.F.);\r
+-#11168=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#11169=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11170=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11171=AXIS2_PLACEMENT_3D('',#11168,#11169,#11170);\r
+-#11172=PLANE('',#11171);\r
+-#11173=ORIENTED_EDGE('',*,*,#11120,.T.);\r
+-#11174=ORIENTED_EDGE('',*,*,#11135,.T.);\r
+-#11175=ORIENTED_EDGE('',*,*,#11149,.T.);\r
+-#11176=ORIENTED_EDGE('',*,*,#11162,.T.);\r
+-#11177=EDGE_LOOP('',(#11173,#11174,#11175,#11176));\r
+-#11178=FACE_OUTER_BOUND('',#11177,.F.);\r
+-#11179=ADVANCED_FACE('',(#11178),#11172,.F.);\r
+-#11180=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));\r
+-#11181=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11182=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11183=AXIS2_PLACEMENT_3D('',#11180,#11181,#11182);\r
+-#11184=PLANE('',#11183);\r
+-#11185=ORIENTED_EDGE('',*,*,#5878,.F.);\r
+-#11187=ORIENTED_EDGE('',*,*,#11186,.T.);\r
+-#11189=ORIENTED_EDGE('',*,*,#11188,.T.);\r
+-#11191=ORIENTED_EDGE('',*,*,#11190,.F.);\r
+-#11192=EDGE_LOOP('',(#11185,#11187,#11189,#11191));\r
+-#11193=FACE_OUTER_BOUND('',#11192,.F.);\r
+-#11194=ADVANCED_FACE('',(#11193),#11184,.F.);\r
+-#11195=CARTESIAN_POINT('',(1.65E1,0.E0,3.075E1));\r
+-#11196=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11197=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11198=AXIS2_PLACEMENT_3D('',#11195,#11196,#11197);\r
+-#11199=CYLINDRICAL_SURFACE('',#11198,5.625E-1);\r
+-#11200=ORIENTED_EDGE('',*,*,#5884,.F.);\r
+-#11202=ORIENTED_EDGE('',*,*,#11201,.T.);\r
+-#11204=ORIENTED_EDGE('',*,*,#11203,.T.);\r
+-#11205=ORIENTED_EDGE('',*,*,#11186,.F.);\r
+-#11206=EDGE_LOOP('',(#11200,#11202,#11204,#11205));\r
+-#11207=FACE_OUTER_BOUND('',#11206,.F.);\r
+-#11208=ADVANCED_FACE('',(#11207),#11199,.F.);\r
+-#11209=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));\r
+-#11210=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11211=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11212=AXIS2_PLACEMENT_3D('',#11209,#11210,#11211);\r
+-#11213=PLANE('',#11212);\r
+-#11214=ORIENTED_EDGE('',*,*,#5882,.F.);\r
+-#11216=ORIENTED_EDGE('',*,*,#11215,.T.);\r
+-#11218=ORIENTED_EDGE('',*,*,#11217,.T.);\r
+-#11219=ORIENTED_EDGE('',*,*,#11201,.F.);\r
+-#11220=EDGE_LOOP('',(#11214,#11216,#11218,#11219));\r
+-#11221=FACE_OUTER_BOUND('',#11220,.F.);\r
+-#11222=ADVANCED_FACE('',(#11221),#11213,.F.);\r
+-#11223=CARTESIAN_POINT('',(1.35E1,0.E0,3.075E1));\r
+-#11224=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11225=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11226=AXIS2_PLACEMENT_3D('',#11223,#11224,#11225);\r
+-#11227=CYLINDRICAL_SURFACE('',#11226,5.625E-1);\r
+-#11228=ORIENTED_EDGE('',*,*,#5880,.F.);\r
+-#11229=ORIENTED_EDGE('',*,*,#11190,.T.);\r
+-#11231=ORIENTED_EDGE('',*,*,#11230,.T.);\r
+-#11232=ORIENTED_EDGE('',*,*,#11215,.F.);\r
+-#11233=EDGE_LOOP('',(#11228,#11229,#11231,#11232));\r
+-#11234=FACE_OUTER_BOUND('',#11233,.F.);\r
+-#11235=ADVANCED_FACE('',(#11234),#11227,.F.);\r
+-#11236=CARTESIAN_POINT('',(2.4E1,6.875E-1,3.2E1));\r
+-#11237=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11238=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11239=AXIS2_PLACEMENT_3D('',#11236,#11237,#11238);\r
+-#11240=PLANE('',#11239);\r
+-#11241=ORIENTED_EDGE('',*,*,#11188,.F.);\r
+-#11242=ORIENTED_EDGE('',*,*,#11203,.F.);\r
+-#11243=ORIENTED_EDGE('',*,*,#11217,.F.);\r
+-#11244=ORIENTED_EDGE('',*,*,#11230,.F.);\r
+-#11245=EDGE_LOOP('',(#11241,#11242,#11243,#11244));\r
+-#11246=FACE_OUTER_BOUND('',#11245,.F.);\r
+-#11247=ADVANCED_FACE('',(#11246),#11240,.T.);\r
+-#11248=CARTESIAN_POINT('',(2.4E1,6.875E-1,3.2E1));\r
+-#11249=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11250=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11251=AXIS2_PLACEMENT_3D('',#11248,#11249,#11250);\r
+-#11252=PLANE('',#11251);\r
+-#11254=ORIENTED_EDGE('',*,*,#11253,.F.);\r
+-#11256=ORIENTED_EDGE('',*,*,#11255,.F.);\r
+-#11258=ORIENTED_EDGE('',*,*,#11257,.F.);\r
+-#11260=ORIENTED_EDGE('',*,*,#11259,.F.);\r
+-#11262=ORIENTED_EDGE('',*,*,#11261,.F.);\r
+-#11263=EDGE_LOOP('',(#11254,#11256,#11258,#11260,#11262));\r
+-#11264=FACE_OUTER_BOUND('',#11263,.F.);\r
+-#11265=ADVANCED_FACE('',(#11264),#11252,.T.);\r
+-#11266=CARTESIAN_POINT('',(2.254426323641E1,-6.892397422826E-2,\r
+-2.742280476768E1));\r
+-#11267=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11268=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#11269=AXIS2_PLACEMENT_3D('',#11266,#11267,#11268);\r
+-#11270=CYLINDRICAL_SURFACE('',#11269,7.5E-1);\r
+-#11272=ORIENTED_EDGE('',*,*,#11271,.F.);\r
+-#11273=ORIENTED_EDGE('',*,*,#5944,.T.);\r
+-#11275=ORIENTED_EDGE('',*,*,#11274,.T.);\r
+-#11276=ORIENTED_EDGE('',*,*,#11253,.T.);\r
+-#11277=EDGE_LOOP('',(#11272,#11273,#11275,#11276));\r
+-#11278=FACE_OUTER_BOUND('',#11277,.F.);\r
+-#11279=ADVANCED_FACE('',(#11278),#11270,.F.);\r
+-#11280=CARTESIAN_POINT('',(2.33125E1,0.E0,2.771522817587E1));\r
+-#11281=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#11282=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));\r
+-#11283=AXIS2_PLACEMENT_3D('',#11280,#11281,#11282);\r
+-#11284=PLANE('',#11283);\r
+-#11285=ORIENTED_EDGE('',*,*,#11271,.T.);\r
+-#11286=ORIENTED_EDGE('',*,*,#11261,.T.);\r
+-#11288=ORIENTED_EDGE('',*,*,#11287,.F.);\r
+-#11289=ORIENTED_EDGE('',*,*,#5946,.F.);\r
+-#11290=EDGE_LOOP('',(#11285,#11286,#11288,#11289));\r
+-#11291=FACE_OUTER_BOUND('',#11290,.F.);\r
+-#11292=ADVANCED_FACE('',(#11291),#11284,.F.);\r
+-#11293=CARTESIAN_POINT('',(1.944696065761E1,0.E0,3.035464591145E1));\r
+-#11294=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11295=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11296=AXIS2_PLACEMENT_3D('',#11293,#11294,#11295);\r
+-#11297=CYLINDRICAL_SURFACE('',#11296,8.669989027347E-1);\r
+-#11298=ORIENTED_EDGE('',*,*,#5948,.F.);\r
+-#11299=ORIENTED_EDGE('',*,*,#11287,.T.);\r
+-#11300=ORIENTED_EDGE('',*,*,#11259,.T.);\r
+-#11302=ORIENTED_EDGE('',*,*,#11301,.F.);\r
+-#11303=EDGE_LOOP('',(#11298,#11299,#11300,#11302));\r
+-#11304=FACE_OUTER_BOUND('',#11303,.F.);\r
+-#11305=ADVANCED_FACE('',(#11304),#11297,.F.);\r
+-#11306=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));\r
+-#11307=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11308=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11309=AXIS2_PLACEMENT_3D('',#11306,#11307,#11308);\r
+-#11310=CYLINDRICAL_SURFACE('',#11309,5.6875E0);\r
+-#11311=ORIENTED_EDGE('',*,*,#5950,.T.);\r
+-#11312=ORIENTED_EDGE('',*,*,#11301,.T.);\r
+-#11313=ORIENTED_EDGE('',*,*,#11257,.T.);\r
+-#11315=ORIENTED_EDGE('',*,*,#11314,.F.);\r
+-#11316=EDGE_LOOP('',(#11311,#11312,#11313,#11315));\r
+-#11317=FACE_OUTER_BOUND('',#11316,.F.);\r
+-#11318=ADVANCED_FACE('',(#11317),#11310,.T.);\r
+-#11319=CARTESIAN_POINT('',(2.239E1,0.E0,2.75E1));\r
+-#11320=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11321=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11322=AXIS2_PLACEMENT_3D('',#11319,#11320,#11321);\r
+-#11323=CYLINDRICAL_SURFACE('',#11322,9.225E-1);\r
+-#11324=ORIENTED_EDGE('',*,*,#11274,.F.);\r
+-#11325=ORIENTED_EDGE('',*,*,#5942,.F.);\r
+-#11326=ORIENTED_EDGE('',*,*,#11314,.T.);\r
+-#11327=ORIENTED_EDGE('',*,*,#11255,.T.);\r
+-#11328=EDGE_LOOP('',(#11324,#11325,#11326,#11327));\r
+-#11329=FACE_OUTER_BOUND('',#11328,.F.);\r
+-#11330=ADVANCED_FACE('',(#11329),#11323,.F.);\r
+-#11331=CARTESIAN_POINT('',(2.13075E1,-6.892397422826E-2,7.81E0));\r
+-#11332=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11333=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11334=AXIS2_PLACEMENT_3D('',#11331,#11332,#11333);\r
+-#11335=CYLINDRICAL_SURFACE('',#11334,8.8E-1);\r
+-#11337=ORIENTED_EDGE('',*,*,#11336,.T.);\r
+-#11339=ORIENTED_EDGE('',*,*,#11338,.T.);\r
+-#11341=ORIENTED_EDGE('',*,*,#11340,.F.);\r
+-#11342=ORIENTED_EDGE('',*,*,#5888,.T.);\r
+-#11343=EDGE_LOOP('',(#11337,#11339,#11341,#11342));\r
+-#11344=FACE_OUTER_BOUND('',#11343,.F.);\r
+-#11345=ADVANCED_FACE('',(#11344),#11335,.T.);\r
+-#11346=CARTESIAN_POINT('',(2.21875E1,0.E0,8.69E0));\r
+-#11347=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11348=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11349=AXIS2_PLACEMENT_3D('',#11346,#11347,#11348);\r
+-#11350=PLANE('',#11349);\r
+-#11351=ORIENTED_EDGE('',*,*,#11336,.F.);\r
+-#11352=ORIENTED_EDGE('',*,*,#5914,.T.);\r
+-#11354=ORIENTED_EDGE('',*,*,#11353,.F.);\r
+-#11356=ORIENTED_EDGE('',*,*,#11355,.F.);\r
+-#11357=EDGE_LOOP('',(#11351,#11352,#11354,#11356));\r
+-#11358=FACE_OUTER_BOUND('',#11357,.F.);\r
+-#11359=ADVANCED_FACE('',(#11358),#11350,.T.);\r
+-#11360=CARTESIAN_POINT('',(2.05675E1,7.463919417831E-1,9.57E0));\r
+-#11361=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11362=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11363=AXIS2_PLACEMENT_3D('',#11360,#11361,#11362);\r
+-#11364=CYLINDRICAL_SURFACE('',#11363,8.8E-1);\r
+-#11366=ORIENTED_EDGE('',*,*,#11365,.F.);\r
+-#11368=ORIENTED_EDGE('',*,*,#11367,.T.);\r
+-#11369=ORIENTED_EDGE('',*,*,#11353,.T.);\r
+-#11370=ORIENTED_EDGE('',*,*,#5912,.T.);\r
+-#11371=EDGE_LOOP('',(#11366,#11368,#11369,#11370));\r
+-#11372=FACE_OUTER_BOUND('',#11371,.F.);\r
+-#11373=ADVANCED_FACE('',(#11372),#11364,.F.);\r
+-#11374=CARTESIAN_POINT('',(1.96875E1,0.E0,8.69E0));\r
+-#11375=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11376=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11377=AXIS2_PLACEMENT_3D('',#11374,#11375,#11376);\r
+-#11378=PLANE('',#11377);\r
+-#11379=ORIENTED_EDGE('',*,*,#11365,.T.);\r
+-#11380=ORIENTED_EDGE('',*,*,#5910,.T.);\r
+-#11382=ORIENTED_EDGE('',*,*,#11381,.F.);\r
+-#11384=ORIENTED_EDGE('',*,*,#11383,.F.);\r
+-#11385=EDGE_LOOP('',(#11379,#11380,#11382,#11384));\r
+-#11386=FACE_OUTER_BOUND('',#11385,.F.);\r
+-#11387=ADVANCED_FACE('',(#11386),#11378,.T.);\r
+-#11388=CARTESIAN_POINT('',(2.05675E1,7.463919417831E-1,1.037E1));\r
+-#11389=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11390=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11391=AXIS2_PLACEMENT_3D('',#11388,#11389,#11390);\r
+-#11392=CYLINDRICAL_SURFACE('',#11391,8.8E-1);\r
+-#11394=ORIENTED_EDGE('',*,*,#11393,.F.);\r
+-#11396=ORIENTED_EDGE('',*,*,#11395,.T.);\r
+-#11397=ORIENTED_EDGE('',*,*,#11381,.T.);\r
+-#11398=ORIENTED_EDGE('',*,*,#5908,.T.);\r
+-#11399=EDGE_LOOP('',(#11394,#11396,#11397,#11398));\r
+-#11400=FACE_OUTER_BOUND('',#11399,.F.);\r
+-#11401=ADVANCED_FACE('',(#11400),#11392,.F.);\r
+-#11402=CARTESIAN_POINT('',(1.96875E1,0.E0,1.125E1));\r
+-#11403=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11404=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11405=AXIS2_PLACEMENT_3D('',#11402,#11403,#11404);\r
+-#11406=PLANE('',#11405);\r
+-#11407=ORIENTED_EDGE('',*,*,#11393,.T.);\r
+-#11408=ORIENTED_EDGE('',*,*,#5906,.T.);\r
+-#11410=ORIENTED_EDGE('',*,*,#11409,.F.);\r
+-#11412=ORIENTED_EDGE('',*,*,#11411,.F.);\r
+-#11413=EDGE_LOOP('',(#11407,#11408,#11410,#11412));\r
+-#11414=FACE_OUTER_BOUND('',#11413,.F.);\r
+-#11415=ADVANCED_FACE('',(#11414),#11406,.T.);\r
+-#11416=CARTESIAN_POINT('',(2.44325E1,7.463919417831E-1,1.037E1));\r
+-#11417=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11418=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11419=AXIS2_PLACEMENT_3D('',#11416,#11417,#11418);\r
+-#11420=CYLINDRICAL_SURFACE('',#11419,8.8E-1);\r
+-#11422=ORIENTED_EDGE('',*,*,#11421,.F.);\r
+-#11424=ORIENTED_EDGE('',*,*,#11423,.T.);\r
+-#11425=ORIENTED_EDGE('',*,*,#11409,.T.);\r
+-#11426=ORIENTED_EDGE('',*,*,#5904,.T.);\r
+-#11427=EDGE_LOOP('',(#11422,#11424,#11425,#11426));\r
+-#11428=FACE_OUTER_BOUND('',#11427,.F.);\r
+-#11429=ADVANCED_FACE('',(#11428),#11420,.F.);\r
+-#11430=CARTESIAN_POINT('',(2.53125E1,0.E0,1.125E1));\r
+-#11431=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11432=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11433=AXIS2_PLACEMENT_3D('',#11430,#11431,#11432);\r
+-#11434=PLANE('',#11433);\r
+-#11436=ORIENTED_EDGE('',*,*,#11435,.F.);\r
+-#11438=ORIENTED_EDGE('',*,*,#11437,.F.);\r
+-#11439=ORIENTED_EDGE('',*,*,#11421,.T.);\r
+-#11440=ORIENTED_EDGE('',*,*,#5902,.T.);\r
+-#11441=EDGE_LOOP('',(#11436,#11438,#11439,#11440));\r
+-#11442=FACE_OUTER_BOUND('',#11441,.F.);\r
+-#11443=ADVANCED_FACE('',(#11442),#11434,.T.);\r
+-#11444=CARTESIAN_POINT('',(2.44325E1,7.463919417831E-1,9.57E0));\r
+-#11445=DIRECTION('',(0.E0,-1.E0,0.E0));\r
+-#11446=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11447=AXIS2_PLACEMENT_3D('',#11444,#11445,#11446);\r
+-#11448=CYLINDRICAL_SURFACE('',#11447,8.8E-1);\r
+-#11450=ORIENTED_EDGE('',*,*,#11449,.F.);\r
+-#11452=ORIENTED_EDGE('',*,*,#11451,.T.);\r
+-#11453=ORIENTED_EDGE('',*,*,#11435,.T.);\r
+-#11454=ORIENTED_EDGE('',*,*,#5900,.T.);\r
+-#11455=EDGE_LOOP('',(#11450,#11452,#11453,#11454));\r
+-#11456=FACE_OUTER_BOUND('',#11455,.F.);\r
+-#11457=ADVANCED_FACE('',(#11456),#11448,.F.);\r
+-#11458=CARTESIAN_POINT('',(2.53125E1,0.E0,8.69E0));\r
+-#11459=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11460=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11461=AXIS2_PLACEMENT_3D('',#11458,#11459,#11460);\r
+-#11462=PLANE('',#11461);\r
+-#11464=ORIENTED_EDGE('',*,*,#11463,.T.);\r
+-#11466=ORIENTED_EDGE('',*,*,#11465,.F.);\r
+-#11467=ORIENTED_EDGE('',*,*,#11449,.T.);\r
+-#11468=ORIENTED_EDGE('',*,*,#5898,.T.);\r
+-#11469=EDGE_LOOP('',(#11464,#11466,#11467,#11468));\r
+-#11470=FACE_OUTER_BOUND('',#11469,.F.);\r
+-#11471=ADVANCED_FACE('',(#11470),#11462,.T.);\r
+-#11472=CARTESIAN_POINT('',(2.419E1,-6.892397422826E-2,7.81E0));\r
+-#11473=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11474=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11475=AXIS2_PLACEMENT_3D('',#11472,#11473,#11474);\r
+-#11476=CYLINDRICAL_SURFACE('',#11475,8.8E-1);\r
+-#11478=ORIENTED_EDGE('',*,*,#11477,.T.);\r
+-#11480=ORIENTED_EDGE('',*,*,#11479,.T.);\r
+-#11481=ORIENTED_EDGE('',*,*,#11463,.F.);\r
+-#11482=ORIENTED_EDGE('',*,*,#5896,.T.);\r
+-#11483=EDGE_LOOP('',(#11478,#11480,#11481,#11482));\r
+-#11484=FACE_OUTER_BOUND('',#11483,.F.);\r
+-#11485=ADVANCED_FACE('',(#11484),#11476,.T.);\r
+-#11486=CARTESIAN_POINT('',(2.331E1,0.E0,8.69E0));\r
+-#11487=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11488=DIRECTION('',(0.E0,0.E0,-1.E0));\r
+-#11489=AXIS2_PLACEMENT_3D('',#11486,#11487,#11488);\r
+-#11490=PLANE('',#11489);\r
+-#11491=ORIENTED_EDGE('',*,*,#11477,.F.);\r
+-#11492=ORIENTED_EDGE('',*,*,#5894,.T.);\r
+-#11494=ORIENTED_EDGE('',*,*,#11493,.T.);\r
+-#11496=ORIENTED_EDGE('',*,*,#11495,.F.);\r
+-#11497=EDGE_LOOP('',(#11491,#11492,#11494,#11496));\r
+-#11498=FACE_OUTER_BOUND('',#11497,.F.);\r
+-#11499=ADVANCED_FACE('',(#11498),#11490,.T.);\r
+-#11500=CARTESIAN_POINT('',(2.274875E1,0.E0,7.5E0));\r
+-#11501=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11502=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11503=AXIS2_PLACEMENT_3D('',#11500,#11501,#11502);\r
+-#11504=CYLINDRICAL_SURFACE('',#11503,5.6125E-1);\r
+-#11505=ORIENTED_EDGE('',*,*,#5892,.T.);\r
+-#11507=ORIENTED_EDGE('',*,*,#11506,.T.);\r
+-#11509=ORIENTED_EDGE('',*,*,#11508,.F.);\r
+-#11510=ORIENTED_EDGE('',*,*,#11493,.F.);\r
+-#11511=EDGE_LOOP('',(#11505,#11507,#11509,#11510));\r
+-#11512=FACE_OUTER_BOUND('',#11511,.F.);\r
+-#11513=ADVANCED_FACE('',(#11512),#11504,.F.);\r
+-#11514=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));\r
+-#11515=DIRECTION('',(1.E0,0.E0,0.E0));\r
+-#11516=DIRECTION('',(0.E0,0.E0,1.E0));\r
+-#11517=AXIS2_PLACEMENT_3D('',#11514,#11515,#11516);\r
+-#11518=PLANE('',#11517);\r
+-#11519=ORIENTED_EDGE('',*,*,#11340,.T.);\r
+-#11521=ORIENTED_EDGE('',*,*,#11520,.F.);\r
+-#11522=ORIENTED_EDGE('',*,*,#11506,.F.);\r
+-#11523=ORIENTED_EDGE('',*,*,#5890,.T.);\r
+-#11524=EDGE_LOOP('',(#11519,#11521,#11522,#11523));\r
+-#11525=FACE_OUTER_BOUND('',#11524,.F.);\r
+-#11526=ADVANCED_FACE('',(#11525),#11518,.T.);\r
+-#11527=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));\r
+-#11528=DIRECTION('',(0.E0,1.E0,0.E0));\r
+-#11529=DIRECTION('',(-1.E0,0.E0,0.E0));\r
+-#11530=AXIS2_PLACEMENT_3D('',#11527,#11528,#11529);\r
+-#11531=PLANE('',#11530);\r
+-#11532=ORIENTED_EDGE('',*,*,#11465,.T.);\r
+-#11533=ORIENTED_EDGE('',*,*,#11479,.F.);\r
+-#11534=ORIENTED_EDGE('',*,*,#11495,.T.);\r
+-#11535=ORIENTED_EDGE('',*,*,#11508,.T.);\r
+-#11536=ORIENTED_EDGE('',*,*,#11520,.T.);\r
+-#11537=ORIENTED_EDGE('',*,*,#11338,.F.);\r
+-#11538=ORIENTED_EDGE('',*,*,#11355,.T.);\r
+-#11539=ORIENTED_EDGE('',*,*,#11367,.F.);\r
+-#11540=ORIENTED_EDGE('',*,*,#11383,.T.);\r
+-#11541=ORIENTED_EDGE('',*,*,#11395,.F.);\r
+-#11542=ORIENTED_EDGE('',*,*,#11411,.T.);\r
+-#11543=ORIENTED_EDGE('',*,*,#11423,.F.);\r
+-#11544=ORIENTED_EDGE('',*,*,#11437,.T.);\r
+-#11545=ORIENTED_EDGE('',*,*,#11451,.F.);\r
+-#11546=EDGE_LOOP('',(#11532,#11533,#11534,#11535,#11536,#11537,#11538,#11539,\r
+-#11540,#11541,#11542,#11543,#11544,#11545));\r
+-#11547=FACE_OUTER_BOUND('',#11546,.F.);\r
+-#11548=ADVANCED_FACE('',(#11547),#11531,.F.);\r
+-#11549=CLOSED_SHELL('',(#5954,#6079,#6094,#6107,#6117,#6132,#6145,#6201,#6214,\r
+-#6278,#6488,#6503,#6516,#6529,#6540,#6555,#6568,#6581,#6592,#6605,#6618,#6631,\r
+-#6644,#6656,#6669,#6683,#6696,#6709,#6723,#6736,#6749,#6763,#6776,#6789,#6802,\r
+-#6815,#6828,#6842,#6855,#6868,#6880,#6893,#6906,#6918,#6931,#6945,#6958,#6971,\r
+-#6984,#6998,#7011,#7024,#7036,#7048,#7061,#7074,#7086,#7099,#7114,#7127,#7152,\r
+-#7166,#7178,#7191,#7204,#7217,#7230,#7244,#7256,#7311,#7325,#7337,#7349,#7368,\r
+-#7379,#7394,#7407,#7423,#7437,#7449,#7465,#7477,#7490,#7514,#7529,#7542,#7552,\r
+-#7567,#7580,#7590,#7605,#7619,#7649,#7662,#7675,#7688,#7701,#7714,#7727,#7740,\r
+-#7753,#7766,#7778,#7790,#7805,#7818,#7828,#7843,#7856,#7866,#7881,#7894,#7907,\r
+-#7918,#7933,#7946,#7959,#7970,#7985,#7998,#8014,#8028,#8040,#8055,#8068,#8084,\r
+-#8098,#8110,#8125,#8138,#8154,#8168,#8180,#8195,#8208,#8224,#8238,#8250,#8265,\r
+-#8278,#8294,#8308,#8320,#8335,#8348,#8364,#8378,#8390,#8405,#8418,#8434,#8448,\r
+-#8460,#8475,#8488,#8504,#8518,#8530,#8545,#8558,#8574,#8588,#8600,#8615,#8628,\r
+-#8644,#8658,#8670,#8685,#8698,#8714,#8728,#8740,#8755,#8768,#8784,#8798,#8810,\r
+-#8825,#8838,#8854,#8868,#8880,#8895,#8908,#8924,#8938,#8950,#8965,#8978,#8994,\r
+-#9008,#9020,#9035,#9048,#9064,#9078,#9090,#9105,#9118,#9134,#9148,#9160,#9175,\r
+-#9188,#9204,#9218,#9230,#9242,#9260,#9275,#9288,#9304,#9318,#9330,#9345,#9359,\r
+-#9373,#9387,#9401,#9415,#9429,#9443,#9457,#9471,#9485,#9498,#9518,#9533,#9546,\r
+-#9556,#9571,#9584,#9594,#9609,#9622,#9632,#9647,#9660,#9670,#9685,#9698,#9708,\r
+-#9723,#9737,#9751,#9765,#9779,#9793,#9807,#9820,#9836,#9851,#9865,#9887,#9901,\r
+-#9913,#9926,#9939,#9952,#9964,#9979,#9993,#10007,#10020,#10032,#10050,#10064,\r
+-#10077,#10090,#10103,#10115,#10130,#10144,#10178,#10192,#10205,#10218,#10230,\r
+-#10243,#10256,#10269,#10282,#10295,#10308,#10321,#10333,#10348,#10362,#10376,\r
+-#10389,#10401,#10416,#10430,#10444,#10457,#10469,#10484,#10498,#10512,#10525,\r
+-#10537,#10552,#10566,#10580,#10593,#10605,#10620,#10634,#10648,#10661,#10673,\r
+-#10691,#10705,#10718,#10731,#10744,#10756,#10771,#10785,#10799,#10812,#10824,\r
+-#10842,#10856,#10869,#10882,#10895,#10907,#10922,#10936,#10950,#10963,#10975,\r
+-#10990,#11004,#11018,#11031,#11043,#11058,#11072,#11086,#11099,#11111,#11126,\r
+-#11140,#11154,#11167,#11179,#11194,#11208,#11222,#11235,#11247,#11265,#11279,\r
+-#11292,#11305,#11318,#11330,#11345,#11359,#11373,#11387,#11401,#11415,#11429,\r
+-#11443,#11457,#11471,#11485,#11499,#11513,#11526,#11548));\r
+-#11550=MANIFOLD_SOLID_BREP('',#11549);\r
+-#11551=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);\r
+-#11552=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));\r
+-#11553=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#11552);\r
+-#11554=(CONVERSION_BASED_UNIT('INCH',#11553)LENGTH_UNIT()NAMED_UNIT(#11551));\r
+-#11555=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);\r
+-#11556=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));\r
+-#11557=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),\r
+-#11556);\r
+-#11558=(CONVERSION_BASED_UNIT('DEGREE',#11557)NAMED_UNIT(#11555)PLANE_ANGLE_UNIT());\r
+-#11559=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());\r
+-#11560=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.404650704771E-3),#11554,\r
+-'closure',\r
+-'Maximum model space distance between geometric entities at asserted connectivities');\r
+-#11561=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((\r
+-#11560))GLOBAL_UNIT_ASSIGNED_CONTEXT((#11554,#11558,#11559))REPRESENTATION_CONTEXT('ID1','3'));\r
+-#11563=APPLICATION_CONTEXT(\r
+-'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');\r
+-#11564=APPLICATION_PROTOCOL_DEFINITION('international standard',\r
+-'config_control_design',1994,#11563);\r
+-#11565=DESIGN_CONTEXT('',#11563,'design');\r
+-#11566=MECHANICAL_CONTEXT('',#11563,'mechanical');\r
+-#11567=PRODUCT('PROESOURCE','PROESOURCE','NOT SPECIFIED',(#11566));\r
+-#11568=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',\r
+-#11567,.MADE.);\r
+-#11572=PRODUCT_CATEGORY('part','');\r
+-#11573=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#11567));\r
+-#11574=PRODUCT_CATEGORY_RELATIONSHIP('','',#11572,#11573);\r
+-#11575=SECURITY_CLASSIFICATION_LEVEL('unclassified');\r
+-#11576=SECURITY_CLASSIFICATION('','',#11575);\r
+-#11577=CC_DESIGN_SECURITY_CLASSIFICATION(#11576,(#11568));\r
+-#11578=APPROVAL_STATUS('approved');\r
+-#11579=APPROVAL(#11578,'');\r
+-#11580=CC_DESIGN_APPROVAL(#11579,(#11576,#11568,#11569));\r
+-#11581=CALENDAR_DATE(102,4,11);\r
+-#11582=COORDINATED_UNIVERSAL_TIME_OFFSET(5,0,.BEHIND.);\r
+-#11583=LOCAL_TIME(14,0,4.8E1,#11582);\r
+-#11584=DATE_AND_TIME(#11581,#11583);\r
+-#11585=APPROVAL_DATE_TIME(#11584,#11579);\r
+-#11586=DATE_TIME_ROLE('creation_date');\r
+-#11587=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#11584,#11586,(#11569));\r
+-#11588=DATE_TIME_ROLE('classification_date');\r
+-#11589=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#11584,#11588,(#11576));\r
+-#11590=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);\r
+-#11591=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');\r
+-#11592=PERSON_AND_ORGANIZATION(#11590,#11591);\r
+-#11593=APPROVAL_ROLE('approver');\r
+-#11594=APPROVAL_PERSON_ORGANIZATION(#11592,#11579,#11593);\r
+-#11595=PERSON_AND_ORGANIZATION_ROLE('creator');\r
+-#11596=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11595,(#11568,\r
+-#11569));\r
+-#11597=PERSON_AND_ORGANIZATION_ROLE('design_supplier');\r
+-#11598=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11597,(#11568));\r
+-#11599=PERSON_AND_ORGANIZATION_ROLE('classification_officer');\r
+-#11600=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11599,(#11576));\r
+-#11601=PERSON_AND_ORGANIZATION_ROLE('design_owner');\r
+-#11602=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11601,(#11567));\r
+-#13=CIRCLE('',#12,1.925E-1);\r
+-#18=CIRCLE('',#17,1.925E-1);\r
+-#23=CIRCLE('',#22,1.925E-1);\r
+-#28=CIRCLE('',#27,1.925E-1);\r
+-#33=CIRCLE('',#32,1.925E-1);\r
+-#38=CIRCLE('',#37,1.925E-1);\r
+-#43=CIRCLE('',#42,1.925E-1);\r
+-#48=CIRCLE('',#47,1.925E-1);\r
+-#53=CIRCLE('',#52,1.925E-1);\r
+-#58=CIRCLE('',#57,1.925E-1);\r
+-#63=CIRCLE('',#62,1.925E-1);\r
+-#68=CIRCLE('',#67,1.925E-1);\r
+-#73=CIRCLE('',#72,1.925E-1);\r
+-#78=CIRCLE('',#77,1.925E-1);\r
+-#83=CIRCLE('',#82,1.925E-1);\r
+-#88=CIRCLE('',#87,1.925E-1);\r
+-#93=CIRCLE('',#92,1.925E-1);\r
+-#98=CIRCLE('',#97,1.925E-1);\r
+-#103=CIRCLE('',#102,1.925E-1);\r
+-#108=CIRCLE('',#107,1.925E-1);\r
+-#113=CIRCLE('',#112,1.925E-1);\r
+-#118=CIRCLE('',#117,1.925E-1);\r
+-#123=CIRCLE('',#122,1.925E-1);\r
+-#128=CIRCLE('',#127,1.925E-1);\r
+-#181=CIRCLE('',#180,1.925E-1);\r
+-#186=CIRCLE('',#185,1.925E-1);\r
+-#191=CIRCLE('',#190,1.925E-1);\r
+-#196=CIRCLE('',#195,1.925E-1);\r
+-#249=CIRCLE('',#248,1.925E-1);\r
+-#254=CIRCLE('',#253,1.925E-1);\r
+-#259=CIRCLE('',#258,1.925E-1);\r
+-#264=CIRCLE('',#263,1.925E-1);\r
+-#269=CIRCLE('',#268,1.925E-1);\r
+-#274=CIRCLE('',#273,1.925E-1);\r
+-#279=CIRCLE('',#278,1.925E-1);\r
+-#284=CIRCLE('',#283,1.925E-1);\r
+-#289=CIRCLE('',#288,1.925E-1);\r
+-#294=CIRCLE('',#293,1.925E-1);\r
+-#299=CIRCLE('',#298,1.925E-1);\r
+-#304=CIRCLE('',#303,1.925E-1);\r
+-#313=CIRCLE('',#312,5.625E-1);\r
+-#322=CIRCLE('',#321,5.625E-1);\r
+-#327=CIRCLE('',#326,9.225E-1);\r
+-#336=CIRCLE('',#335,8.669989027347E-1);\r
+-#341=CIRCLE('',#340,5.6875E0);\r
+-#350=CIRCLE('',#349,5.6125E-1);\r
+-#383=CIRCLE('',#382,5.625E-1);\r
+-#392=CIRCLE('',#391,5.625E-1);\r
+-#401=CIRCLE('',#400,5.625E-1);\r
+-#410=CIRCLE('',#409,5.625E-1);\r
+-#419=CIRCLE('',#418,5.E-1);\r
+-#428=CIRCLE('',#427,5.E-1);\r
+-#437=CIRCLE('',#436,4.375E-1);\r
+-#446=CIRCLE('',#445,4.375E-1);\r
+-#455=CIRCLE('',#454,5.625E-1);\r
+-#464=CIRCLE('',#463,5.625E-1);\r
+-#473=CIRCLE('',#472,5.625E-1);\r
+-#482=CIRCLE('',#481,5.625E-1);\r
+-#491=CIRCLE('',#490,5.625E-1);\r
+-#500=CIRCLE('',#499,5.625E-1);\r
+-#509=CIRCLE('',#508,5.625E-1);\r
+-#518=CIRCLE('',#517,5.625E-1);\r
+-#527=CIRCLE('',#526,5.E-1);\r
+-#536=CIRCLE('',#535,5.E-1);\r
+-#545=CIRCLE('',#544,4.375E-1);\r
+-#554=CIRCLE('',#553,4.375E-1);\r
+-#563=CIRCLE('',#562,5.625E-1);\r
+-#572=CIRCLE('',#571,5.625E-1);\r
+-#581=CIRCLE('',#580,5.6125E-1);\r
+-#614=CIRCLE('',#613,9.225E-1);\r
+-#619=CIRCLE('',#618,5.6875E0);\r
+-#624=CIRCLE('',#623,8.669989027347E-1);\r
+-#633=CIRCLE('',#632,9.225E-1);\r
+-#638=CIRCLE('',#637,5.6875E0);\r
+-#643=CIRCLE('',#642,8.669989027347E-1);\r
+-#648=CIRCLE('',#647,9.225E-1);\r
+-#657=CIRCLE('',#656,8.669989027347E-1);\r
+-#662=CIRCLE('',#661,5.6875E0);\r
+-#667=CIRCLE('',#666,9.5E-2);\r
+-#672=CIRCLE('',#671,9.5E-2);\r
+-#677=CIRCLE('',#676,1.625E-1);\r
+-#682=CIRCLE('',#681,1.625E-1);\r
+-#687=CIRCLE('',#686,9.5E-2);\r
+-#692=CIRCLE('',#691,9.5E-2);\r
+-#697=CIRCLE('',#696,9.5E-2);\r
+-#702=CIRCLE('',#701,9.5E-2);\r
+-#707=CIRCLE('',#706,9.5E-2);\r
+-#712=CIRCLE('',#711,9.5E-2);\r
+-#717=CIRCLE('',#716,9.5E-2);\r
+-#722=CIRCLE('',#721,9.5E-2);\r
+-#727=CIRCLE('',#726,1.625E-1);\r
+-#732=CIRCLE('',#731,1.625E-1);\r
+-#737=CIRCLE('',#736,9.5E-2);\r
+-#742=CIRCLE('',#741,9.5E-2);\r
+-#803=CIRCLE('',#802,9.5E-2);\r
+-#808=CIRCLE('',#807,9.5E-2);\r
+-#821=CIRCLE('',#820,1.625E-1);\r
+-#826=CIRCLE('',#825,1.625E-1);\r
+-#887=CIRCLE('',#886,1.E-1);\r
+-#892=CIRCLE('',#891,1.E-1);\r
+-#897=CIRCLE('',#896,1.E-1);\r
+-#902=CIRCLE('',#901,1.E-1);\r
+-#931=CIRCLE('',#930,1.E-1);\r
+-#936=CIRCLE('',#935,1.E-1);\r
+-#941=CIRCLE('',#940,1.E-1);\r
+-#946=CIRCLE('',#945,1.E-1);\r
+-#951=CIRCLE('',#950,2.575E-1);\r
+-#956=CIRCLE('',#955,2.575E-1);\r
+-#961=CIRCLE('',#960,2.575E-1);\r
+-#966=CIRCLE('',#965,2.575E-1);\r
+-#971=CIRCLE('',#970,2.575E-1);\r
+-#976=CIRCLE('',#975,2.575E-1);\r
+-#981=CIRCLE('',#980,2.575E-1);\r
+-#986=CIRCLE('',#985,2.575E-1);\r
+-#991=CIRCLE('',#990,2.575E-1);\r
+-#996=CIRCLE('',#995,2.575E-1);\r
+-#1001=CIRCLE('',#1000,2.575E-1);\r
+-#1006=CIRCLE('',#1005,2.575E-1);\r
+-#1011=CIRCLE('',#1010,2.56E-1);\r
+-#1016=CIRCLE('',#1015,2.56E-1);\r
+-#1021=CIRCLE('',#1020,2.56E-1);\r
+-#1026=CIRCLE('',#1025,2.56E-1);\r
+-#1031=CIRCLE('',#1030,2.56E-1);\r
+-#1036=CIRCLE('',#1035,2.56E-1);\r
+-#1041=CIRCLE('',#1040,2.56E-1);\r
+-#1046=CIRCLE('',#1045,2.56E-1);\r
+-#1051=CIRCLE('',#1050,2.56E-1);\r
+-#1056=CIRCLE('',#1055,2.56E-1);\r
+-#1061=CIRCLE('',#1060,2.56E-1);\r
+-#1066=CIRCLE('',#1065,2.56E-1);\r
+-#1115=CIRCLE('',#1114,2.575E-1);\r
+-#1120=CIRCLE('',#1119,2.575E-1);\r
+-#1125=CIRCLE('',#1124,2.575E-1);\r
+-#1130=CIRCLE('',#1129,2.575E-1);\r
+-#1135=CIRCLE('',#1134,2.575E-1);\r
+-#1140=CIRCLE('',#1139,2.575E-1);\r
+-#1145=CIRCLE('',#1144,2.575E-1);\r
+-#1150=CIRCLE('',#1149,2.575E-1);\r
+-#1155=CIRCLE('',#1154,2.575E-1);\r
+-#1160=CIRCLE('',#1159,2.575E-1);\r
+-#1165=CIRCLE('',#1164,2.575E-1);\r
+-#1170=CIRCLE('',#1169,2.575E-1);\r
+-#1259=CIRCLE('',#1258,1.E-1);\r
+-#1268=CIRCLE('',#1267,1.E-1);\r
+-#1285=CIRCLE('',#1284,1.E-1);\r
+-#1294=CIRCLE('',#1293,1.E-1);\r
+-#1303=CIRCLE('',#1302,1.E0);\r
+-#1312=CIRCLE('',#1311,1.E0);\r
+-#1317=CIRCLE('',#1316,5.E0);\r
+-#1326=CIRCLE('',#1325,5.E0);\r
+-#1331=CIRCLE('',#1330,5.E0);\r
+-#1340=CIRCLE('',#1339,5.E0);\r
+-#1349=CIRCLE('',#1348,1.E0);\r
+-#1358=CIRCLE('',#1357,1.E0);\r
+-#1367=CIRCLE('',#1366,1.E0);\r
+-#1376=CIRCLE('',#1375,1.E0);\r
+-#1385=CIRCLE('',#1384,1.E0);\r
+-#1394=CIRCLE('',#1393,1.E0);\r
+-#1403=CIRCLE('',#1402,1.E0);\r
+-#1412=CIRCLE('',#1411,1.E0);\r
+-#1421=CIRCLE('',#1420,3.E0);\r
+-#1430=CIRCLE('',#1429,3.E0);\r
+-#1439=CIRCLE('',#1438,3.E0);\r
+-#1448=CIRCLE('',#1447,3.E0);\r
+-#1457=CIRCLE('',#1456,5.E0);\r
+-#1466=CIRCLE('',#1465,5.E0);\r
+-#1475=CIRCLE('',#1474,5.E0);\r
+-#1484=CIRCLE('',#1483,5.E0);\r
+-#1493=CIRCLE('',#1492,3.E0);\r
+-#1502=CIRCLE('',#1501,3.E0);\r
+-#1511=CIRCLE('',#1510,3.E0);\r
+-#1520=CIRCLE('',#1519,3.E0);\r
+-#1529=CIRCLE('',#1528,1.E0);\r
+-#1538=CIRCLE('',#1537,1.E0);\r
+-#1547=CIRCLE('',#1546,1.E0);\r
+-#1556=CIRCLE('',#1555,1.E0);\r
+-#1597=CIRCLE('',#1596,1.E0);\r
+-#1606=CIRCLE('',#1605,1.E0);\r
+-#1675=CIRCLE('',#1674,9.5E-2);\r
+-#1680=CIRCLE('',#1679,9.5E-2);\r
+-#1685=CIRCLE('',#1684,6.25E-2);\r
+-#1690=CIRCLE('',#1689,6.25E-2);\r
+-#1707=CIRCLE('',#1706,1.E0);\r
+-#1716=CIRCLE('',#1715,1.E0);\r
+-#1729=CIRCLE('',#1728,1.E0);\r
+-#1738=CIRCLE('',#1737,1.E0);\r
+-#1767=CIRCLE('',#1766,1.625E-1);\r
+-#1772=CIRCLE('',#1771,1.625E-1);\r
+-#1846=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1837,#1838,#1839,#1840,#1841,#1842,#1843,\r
+-#1844,#1845),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,\r
+-6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);\r
+-#1856=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1847,#1848,#1849,#1850,#1851,#1852,#1853,\r
+-#1854,#1855),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,\r
+-6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);\r
+-#1873=CIRCLE('',#1872,2.575E-1);\r
+-#1878=CIRCLE('',#1877,2.575E-1);\r
+-#1883=CIRCLE('',#1882,1.925E-1);\r
+-#1888=CIRCLE('',#1887,1.925E-1);\r
+-#1933=CIRCLE('',#1932,9.5E-2);\r
+-#1938=CIRCLE('',#1937,9.5E-2);\r
+-#1943=CIRCLE('',#1942,6.25E-2);\r
+-#1948=CIRCLE('',#1947,6.25E-2);\r
+-#1961=CIRCLE('',#1960,9.5E-2);\r
+-#1966=CIRCLE('',#1965,9.5E-2);\r
+-#1979=CIRCLE('',#1978,6.25E-2);\r
+-#1984=CIRCLE('',#1983,6.25E-2);\r
+-#1993=CIRCLE('',#1992,3.5E-1);\r
+-#2002=CIRCLE('',#2001,3.5E-1);\r
+-#2035=CIRCLE('',#2034,3.5E-1);\r
+-#2044=CIRCLE('',#2043,3.5E-1);\r
+-#2053=CIRCLE('',#2052,3.5E-1);\r
+-#2062=CIRCLE('',#2061,3.5E-1);\r
+-#2071=CIRCLE('',#2070,3.5E-1);\r
+-#2080=CIRCLE('',#2079,3.5E-1);\r
+-#2089=CIRCLE('',#2088,3.5E-1);\r
+-#2098=CIRCLE('',#2097,3.5E-1);\r
+-#2107=CIRCLE('',#2106,3.5E-1);\r
+-#2116=CIRCLE('',#2115,3.5E-1);\r
+-#2145=CIRCLE('',#2144,9.5E-2);\r
+-#2150=CIRCLE('',#2149,9.5E-2);\r
+-#2163=CIRCLE('',#2162,6.25E-2);\r
+-#2168=CIRCLE('',#2167,6.25E-2);\r
+-#2189=CIRCLE('',#2188,1.E-1);\r
+-#2194=CIRCLE('',#2193,1.E-1);\r
+-#2215=CIRCLE('',#2214,1.E-1);\r
+-#2220=CIRCLE('',#2219,1.E-1);\r
+-#2233=CIRCLE('',#2232,2.575E-1);\r
+-#2238=CIRCLE('',#2237,2.575E-1);\r
+-#2243=CIRCLE('',#2242,1.925E-1);\r
+-#2248=CIRCLE('',#2247,1.925E-1);\r
+-#2269=CIRCLE('',#2268,2.575E-1);\r
+-#2274=CIRCLE('',#2273,2.575E-1);\r
+-#2279=CIRCLE('',#2278,1.925E-1);\r
+-#2284=CIRCLE('',#2283,1.925E-1);\r
+-#2305=CIRCLE('',#2304,2.575E-1);\r
+-#2310=CIRCLE('',#2309,2.575E-1);\r
+-#2315=CIRCLE('',#2314,1.925E-1);\r
+-#2320=CIRCLE('',#2319,1.925E-1);\r
+-#2341=CIRCLE('',#2340,2.575E-1);\r
+-#2346=CIRCLE('',#2345,2.575E-1);\r
+-#2351=CIRCLE('',#2350,1.925E-1);\r
+-#2356=CIRCLE('',#2355,1.925E-1);\r
+-#2377=CIRCLE('',#2376,2.575E-1);\r
+-#2382=CIRCLE('',#2381,2.575E-1);\r
+-#2387=CIRCLE('',#2386,1.925E-1);\r
+-#2392=CIRCLE('',#2391,1.925E-1);\r
+-#2413=CIRCLE('',#2412,2.575E-1);\r
+-#2418=CIRCLE('',#2417,2.575E-1);\r
+-#2423=CIRCLE('',#2422,1.925E-1);\r
+-#2428=CIRCLE('',#2427,1.925E-1);\r
+-#2449=CIRCLE('',#2448,2.56E-1);\r
+-#2454=CIRCLE('',#2453,2.56E-1);\r
+-#2459=CIRCLE('',#2458,1.925E-1);\r
+-#2464=CIRCLE('',#2463,1.925E-1);\r
+-#2485=CIRCLE('',#2484,2.56E-1);\r
+-#2490=CIRCLE('',#2489,2.56E-1);\r
+-#2495=CIRCLE('',#2494,1.925E-1);\r
+-#2500=CIRCLE('',#2499,1.925E-1);\r
+-#2521=CIRCLE('',#2520,2.56E-1);\r
+-#2526=CIRCLE('',#2525,2.56E-1);\r
+-#2531=CIRCLE('',#2530,1.925E-1);\r
+-#2536=CIRCLE('',#2535,1.925E-1);\r
+-#2557=CIRCLE('',#2556,2.56E-1);\r
+-#2562=CIRCLE('',#2561,2.56E-1);\r
+-#2567=CIRCLE('',#2566,1.925E-1);\r
+-#2572=CIRCLE('',#2571,1.925E-1);\r
+-#2593=CIRCLE('',#2592,2.56E-1);\r
+-#2598=CIRCLE('',#2597,2.56E-1);\r
+-#2603=CIRCLE('',#2602,1.925E-1);\r
+-#2608=CIRCLE('',#2607,1.925E-1);\r
+-#2629=CIRCLE('',#2628,2.56E-1);\r
+-#2634=CIRCLE('',#2633,2.56E-1);\r
+-#2639=CIRCLE('',#2638,1.925E-1);\r
+-#2644=CIRCLE('',#2643,1.925E-1);\r
+-#2665=CIRCLE('',#2664,2.575E-1);\r
+-#2670=CIRCLE('',#2669,2.575E-1);\r
+-#2675=CIRCLE('',#2674,1.925E-1);\r
+-#2680=CIRCLE('',#2679,1.925E-1);\r
+-#2701=CIRCLE('',#2700,2.575E-1);\r
+-#2706=CIRCLE('',#2705,2.575E-1);\r
+-#2711=CIRCLE('',#2710,1.925E-1);\r
+-#2716=CIRCLE('',#2715,1.925E-1);\r
+-#2737=CIRCLE('',#2736,2.575E-1);\r
+-#2742=CIRCLE('',#2741,2.575E-1);\r
+-#2747=CIRCLE('',#2746,1.925E-1);\r
+-#2752=CIRCLE('',#2751,1.925E-1);\r
+-#2773=CIRCLE('',#2772,2.575E-1);\r
+-#2778=CIRCLE('',#2777,2.575E-1);\r
+-#2783=CIRCLE('',#2782,1.925E-1);\r
+-#2788=CIRCLE('',#2787,1.925E-1);\r
+-#2809=CIRCLE('',#2808,2.575E-1);\r
+-#2814=CIRCLE('',#2813,2.575E-1);\r
+-#2819=CIRCLE('',#2818,1.925E-1);\r
+-#2824=CIRCLE('',#2823,1.925E-1);\r
+-#2845=CIRCLE('',#2844,2.575E-1);\r
+-#2850=CIRCLE('',#2849,2.575E-1);\r
+-#2855=CIRCLE('',#2854,1.925E-1);\r
+-#2860=CIRCLE('',#2859,1.925E-1);\r
+-#2882=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2873,#2874,#2875,#2876,#2877,#2878,#2879,\r
+-#2880,#2881),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,\r
+-6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);\r
+-#2892=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2883,#2884,#2885,#2886,#2887,#2888,#2889,\r
+-#2890,#2891),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,\r
+-6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);\r
+-#2905=CIRCLE('',#2904,2.575E-1);\r
+-#2910=CIRCLE('',#2909,2.575E-1);\r
+-#2915=CIRCLE('',#2914,1.925E-1);\r
+-#2920=CIRCLE('',#2919,1.925E-1);\r
+-#2937=CIRCLE('',#2936,3.5E-1);\r
+-#2946=CIRCLE('',#2945,3.5E-1);\r
+-#2955=CIRCLE('',#2954,3.5E-1);\r
+-#2964=CIRCLE('',#2963,3.5E-1);\r
+-#2973=CIRCLE('',#2972,3.5E-1);\r
+-#2982=CIRCLE('',#2981,3.5E-1);\r
+-#2991=CIRCLE('',#2990,3.5E-1);\r
+-#3000=CIRCLE('',#2999,3.5E-1);\r
+-#3009=CIRCLE('',#3008,3.5E-1);\r
+-#3018=CIRCLE('',#3017,3.5E-1);\r
+-#3027=CIRCLE('',#3026,3.5E-1);\r
+-#3036=CIRCLE('',#3035,3.5E-1);\r
+-#3073=CIRCLE('',#3072,9.5E-2);\r
+-#3078=CIRCLE('',#3077,9.5E-2);\r
+-#3091=CIRCLE('',#3090,9.5E-2);\r
+-#3096=CIRCLE('',#3095,9.5E-2);\r
+-#3109=CIRCLE('',#3108,9.5E-2);\r
+-#3114=CIRCLE('',#3113,9.5E-2);\r
+-#3127=CIRCLE('',#3126,9.5E-2);\r
+-#3132=CIRCLE('',#3131,9.5E-2);\r
+-#3145=CIRCLE('',#3144,9.5E-2);\r
+-#3150=CIRCLE('',#3149,9.5E-2);\r
+-#3159=CIRCLE('',#3158,7.5E-1);\r
+-#3168=CIRCLE('',#3167,7.5E-1);\r
+-#3177=CIRCLE('',#3176,7.5E-1);\r
+-#3186=CIRCLE('',#3185,7.5E-1);\r
+-#3195=CIRCLE('',#3194,7.5E-1);\r
+-#3204=CIRCLE('',#3203,7.5E-1);\r
+-#3213=CIRCLE('',#3212,7.5E-1);\r
+-#3222=CIRCLE('',#3221,7.5E-1);\r
+-#3247=CIRCLE('',#3246,7.5E-1);\r
+-#3256=CIRCLE('',#3255,7.5E-1);\r
+-#3281=CIRCLE('',#3280,7.5E-1);\r
+-#3290=CIRCLE('',#3289,7.5E-1);\r
+-#3299=CIRCLE('',#3298,7.5E-1);\r
+-#3308=CIRCLE('',#3307,7.5E-1);\r
+-#3317=CIRCLE('',#3316,7.5E-1);\r
+-#3326=CIRCLE('',#3325,7.5E-1);\r
+-#3351=CIRCLE('',#3350,5.625E-1);\r
+-#3360=CIRCLE('',#3359,5.625E-1);\r
+-#3365=CIRCLE('',#3364,9.225E-1);\r
+-#3370=CIRCLE('',#3369,5.6875E0);\r
+-#3375=CIRCLE('',#3374,8.669989027347E-1);\r
+-#3388=CIRCLE('',#3387,7.5E-1);\r
+-#3397=CIRCLE('',#3396,7.5E-1);\r
+-#3418=CIRCLE('',#3417,8.75E-1);\r
+-#3427=CIRCLE('',#3426,8.75E-1);\r
+-#3440=CIRCLE('',#3439,5.6125E-1);\r
+-#3469=CIRCLE('',#3468,8.75E-1);\r
+-#3478=CIRCLE('',#3477,8.75E-1);\r
+-#3495=CIRCLE('',#3494,8.75E-1);\r
+-#3504=CIRCLE('',#3503,8.75E-1);\r
+-#3513=CIRCLE('',#3512,8.75E-1);\r
+-#3522=CIRCLE('',#3521,8.75E-1);\r
+-#3531=CIRCLE('',#3530,8.75E-1);\r
+-#3540=CIRCLE('',#3539,8.75E-1);\r
+-#3549=CIRCLE('',#3548,8.75E-1);\r
+-#3558=CIRCLE('',#3557,8.75E-1);\r
+-#3583=CIRCLE('',#3582,5.625E-1);\r
+-#3592=CIRCLE('',#3591,5.625E-1);\r
+-#3617=CIRCLE('',#3616,5.625E-1);\r
+-#3626=CIRCLE('',#3625,5.625E-1);\r
+-#3651=CIRCLE('',#3650,5.E-1);\r
+-#3660=CIRCLE('',#3659,5.E-1);\r
+-#3685=CIRCLE('',#3684,4.375E-1);\r
+-#3694=CIRCLE('',#3693,4.375E-1);\r
+-#3719=CIRCLE('',#3718,5.625E-1);\r
+-#3728=CIRCLE('',#3727,5.625E-1);\r
+-#3737=CIRCLE('',#3736,8.669989027347E-1);\r
+-#3742=CIRCLE('',#3741,5.6875E0);\r
+-#3747=CIRCLE('',#3746,9.225E-1);\r
+-#3756=CIRCLE('',#3755,7.5E-1);\r
+-#3765=CIRCLE('',#3764,7.5E-1);\r
+-#3802=CIRCLE('',#3801,5.625E-1);\r
+-#3811=CIRCLE('',#3810,5.625E-1);\r
+-#3820=CIRCLE('',#3819,8.669989027347E-1);\r
+-#3825=CIRCLE('',#3824,5.6875E0);\r
+-#3830=CIRCLE('',#3829,9.225E-1);\r
+-#3839=CIRCLE('',#3838,7.5E-1);\r
+-#3848=CIRCLE('',#3847,7.5E-1);\r
+-#3885=CIRCLE('',#3884,5.625E-1);\r
+-#3894=CIRCLE('',#3893,5.625E-1);\r
+-#3919=CIRCLE('',#3918,5.625E-1);\r
+-#3928=CIRCLE('',#3927,5.625E-1);\r
+-#3953=CIRCLE('',#3952,5.E-1);\r
+-#3962=CIRCLE('',#3961,5.E-1);\r
+-#3987=CIRCLE('',#3986,4.375E-1);\r
+-#3996=CIRCLE('',#3995,4.375E-1);\r
+-#4021=CIRCLE('',#4020,5.625E-1);\r
+-#4030=CIRCLE('',#4029,5.625E-1);\r
+-#4035=CIRCLE('',#4034,9.225E-1);\r
+-#4040=CIRCLE('',#4039,5.6875E0);\r
+-#4045=CIRCLE('',#4044,8.669989027347E-1);\r
+-#4058=CIRCLE('',#4057,7.5E-1);\r
+-#4067=CIRCLE('',#4066,7.5E-1);\r
+-#4088=CIRCLE('',#4087,8.8E-1);\r
+-#4097=CIRCLE('',#4096,8.8E-1);\r
+-#4106=CIRCLE('',#4105,8.8E-1);\r
+-#4115=CIRCLE('',#4114,8.8E-1);\r
+-#4124=CIRCLE('',#4123,8.8E-1);\r
+-#4133=CIRCLE('',#4132,8.8E-1);\r
+-#4142=CIRCLE('',#4141,8.8E-1);\r
+-#4151=CIRCLE('',#4150,8.8E-1);\r
+-#4160=CIRCLE('',#4159,8.8E-1);\r
+-#4169=CIRCLE('',#4168,8.8E-1);\r
+-#4178=CIRCLE('',#4177,8.8E-1);\r
+-#4187=CIRCLE('',#4186,8.8E-1);\r
+-#4208=CIRCLE('',#4207,5.6125E-1);\r
+-#5494=EDGE_CURVE('',#4423,#4400,#132,.T.);\r
+-#5496=EDGE_CURVE('',#4419,#4423,#1597,.T.);\r
+-#5498=EDGE_CURVE('',#4419,#4243,#136,.T.);\r
+-#5500=EDGE_CURVE('',#4239,#4243,#1614,.T.);\r
+-#5502=EDGE_CURVE('',#4239,#4259,#140,.T.);\r
+-#5504=EDGE_CURVE('',#4255,#4259,#1630,.T.);\r
+-#5506=EDGE_CURVE('',#4255,#4320,#144,.T.);\r
+-#5508=EDGE_CURVE('',#4324,#4320,#1376,.T.);\r
+-#5510=EDGE_CURVE('',#4324,#4300,#148,.T.);\r
+-#5512=EDGE_CURVE('',#4300,#4347,#152,.T.);\r
+-#5514=EDGE_CURVE('',#4343,#4347,#1912,.T.);\r
+-#5516=EDGE_CURVE('',#4343,#4315,#156,.T.);\r
+-#5518=EDGE_CURVE('',#4311,#4315,#1385,.T.);\r
+-#5520=EDGE_CURVE('',#4311,#4251,#160,.T.);\r
+-#5522=EDGE_CURVE('',#4247,#4251,#1580,.T.);\r
+-#5524=EDGE_CURVE('',#4247,#4235,#164,.T.);\r
+-#5526=EDGE_CURVE('',#4231,#4235,#1564,.T.);\r
+-#5528=EDGE_CURVE('',#4231,#4404,#168,.T.);\r
+-#5530=EDGE_CURVE('',#4408,#4404,#1556,.T.);\r
+-#5532=EDGE_CURVE('',#4444,#4408,#172,.T.);\r
+-#5534=EDGE_CURVE('',#4444,#4448,#1654,.T.);\r
+-#5536=EDGE_CURVE('',#4400,#4448,#176,.T.);\r
+-#5540=EDGE_CURVE('',#4427,#4328,#4,.T.);\r
+-#5542=EDGE_CURVE('',#4332,#4328,#1358,.T.);\r
+-#5544=EDGE_CURVE('',#4264,#4332,#1340,.T.);\r
+-#5546=EDGE_CURVE('',#4268,#4264,#8,.T.);\r
+-#5548=EDGE_CURVE('',#4431,#4268,#1317,.T.);\r
+-#5550=EDGE_CURVE('',#4427,#4431,#1303,.T.);\r
+-#5554=EDGE_CURVE('',#4639,#4640,#13,.T.);\r
+-#5556=EDGE_CURVE('',#4640,#4639,#18,.T.);\r
+-#5560=EDGE_CURVE('',#4635,#4636,#23,.T.);\r
+-#5562=EDGE_CURVE('',#4636,#4635,#28,.T.);\r
+-#5566=EDGE_CURVE('',#4631,#4632,#33,.T.);\r
+-#5568=EDGE_CURVE('',#4632,#4631,#38,.T.);\r
+-#5572=EDGE_CURVE('',#4627,#4628,#43,.T.);\r
+-#5574=EDGE_CURVE('',#4628,#4627,#48,.T.);\r
+-#5578=EDGE_CURVE('',#4623,#4624,#53,.T.);\r
+-#5580=EDGE_CURVE('',#4624,#4623,#58,.T.);\r
+-#5584=EDGE_CURVE('',#4527,#4528,#63,.T.);\r
+-#5586=EDGE_CURVE('',#4528,#4527,#68,.T.);\r
+-#5590=EDGE_CURVE('',#4523,#4524,#73,.T.);\r
+-#5592=EDGE_CURVE('',#4524,#4523,#78,.T.);\r
+-#5596=EDGE_CURVE('',#4519,#4520,#83,.T.);\r
+-#5598=EDGE_CURVE('',#4520,#4519,#88,.T.);\r
+-#5602=EDGE_CURVE('',#4515,#4516,#93,.T.);\r
+-#5604=EDGE_CURVE('',#4516,#4515,#98,.T.);\r
+-#5608=EDGE_CURVE('',#4511,#4512,#103,.T.);\r
+-#5610=EDGE_CURVE('',#4512,#4511,#108,.T.);\r
+-#5614=EDGE_CURVE('',#4507,#4508,#113,.T.);\r
+-#5616=EDGE_CURVE('',#4508,#4507,#118,.T.);\r
+-#5620=EDGE_CURVE('',#4503,#4504,#123,.T.);\r
+-#5622=EDGE_CURVE('',#4504,#4503,#128,.T.);\r
+-#5626=EDGE_CURVE('',#4487,#4488,#181,.T.);\r
+-#5628=EDGE_CURVE('',#4488,#4487,#186,.T.);\r
+-#5632=EDGE_CURVE('',#4607,#4608,#191,.T.);\r
+-#5634=EDGE_CURVE('',#4608,#4607,#196,.T.);\r
+-#5638=EDGE_CURVE('',#4796,#4803,#200,.T.);\r
+-#5640=EDGE_CURVE('',#4799,#4803,#1439,.T.);\r
+-#5642=EDGE_CURVE('',#4280,#4799,#204,.T.);\r
+-#5644=EDGE_CURVE('',#4284,#4280,#1466,.T.);\r
+-#5646=EDGE_CURVE('',#4272,#4284,#208,.T.);\r
+-#5648=EDGE_CURVE('',#4276,#4272,#1484,.T.);\r
+-#5650=EDGE_CURVE('',#4792,#4276,#212,.T.);\r
+-#5652=EDGE_CURVE('',#4796,#4792,#1430,.T.);\r
+-#5656=EDGE_CURVE('',#4808,#4411,#216,.T.);\r
+-#5658=EDGE_CURVE('',#4812,#4808,#1502,.T.);\r
+-#5660=EDGE_CURVE('',#4812,#4819,#220,.T.);\r
+-#5662=EDGE_CURVE('',#4815,#4819,#1511,.T.);\r
+-#5664=EDGE_CURVE('',#4304,#4815,#224,.T.);\r
+-#5666=EDGE_CURVE('',#4308,#4304,#1412,.T.);\r
+-#5668=EDGE_CURVE('',#4308,#4339,#228,.T.);\r
+-#5670=EDGE_CURVE('',#4335,#4339,#1754,.T.);\r
+-#5672=EDGE_CURVE('',#4335,#4772,#232,.T.);\r
+-#5674=EDGE_CURVE('',#4776,#4772,#1738,.T.);\r
+-#5676=EDGE_CURVE('',#4776,#4783,#236,.T.);\r
+-#5678=EDGE_CURVE('',#4779,#4783,#1707,.T.);\r
+-#5680=EDGE_CURVE('',#4436,#4779,#240,.T.);\r
+-#5682=EDGE_CURVE('',#4436,#4440,#2132,.T.);\r
+-#5684=EDGE_CURVE('',#4415,#4440,#244,.T.);\r
+-#5686=EDGE_CURVE('',#4411,#4415,#1529,.T.);\r
+-#5690=EDGE_CURVE('',#4823,#4824,#249,.T.);\r
+-#5692=EDGE_CURVE('',#4824,#4823,#254,.T.);\r
+-#5696=EDGE_CURVE('',#4839,#4840,#259,.T.);\r
+-#5698=EDGE_CURVE('',#4840,#4839,#264,.T.);\r
+-#5702=EDGE_CURVE('',#4843,#4844,#269,.T.);\r
+-#5704=EDGE_CURVE('',#4844,#4843,#274,.T.);\r
+-#5708=EDGE_CURVE('',#4847,#4848,#279,.T.);\r
+-#5710=EDGE_CURVE('',#4848,#4847,#284,.T.);\r
+-#5714=EDGE_CURVE('',#4851,#4852,#289,.T.);\r
+-#5716=EDGE_CURVE('',#4852,#4851,#294,.T.);\r
+-#5720=EDGE_CURVE('',#4855,#4856,#299,.T.);\r
+-#5722=EDGE_CURVE('',#4856,#4855,#304,.T.);\r
+-#5726=EDGE_CURVE('',#5121,#5122,#308,.T.);\r
+-#5728=EDGE_CURVE('',#5122,#5124,#313,.T.);\r
+-#5730=EDGE_CURVE('',#5124,#5126,#317,.T.);\r
+-#5732=EDGE_CURVE('',#5126,#5121,#322,.T.);\r
+-#5736=EDGE_CURVE('',#5132,#5139,#327,.T.);\r
+-#5738=EDGE_CURVE('',#5135,#5139,#3388,.T.);\r
+-#5740=EDGE_CURVE('',#5135,#5129,#331,.T.);\r
+-#5742=EDGE_CURVE('',#5129,#5130,#336,.T.);\r
+-#5744=EDGE_CURVE('',#5132,#5130,#341,.T.);\r
+-#5748=EDGE_CURVE('',#5184,#5186,#3418,.T.);\r
+-#5750=EDGE_CURVE('',#5184,#5147,#345,.T.);\r
+-#5752=EDGE_CURVE('',#5147,#5148,#350,.T.);\r
+-#5754=EDGE_CURVE('',#5148,#5194,#354,.T.);\r
+-#5756=EDGE_CURVE('',#5192,#5194,#3469,.T.);\r
+-#5758=EDGE_CURVE('',#5192,#5171,#358,.T.);\r
+-#5760=EDGE_CURVE('',#5167,#5171,#3495,.T.);\r
+-#5762=EDGE_CURVE('',#5167,#5179,#362,.T.);\r
+-#5764=EDGE_CURVE('',#5175,#5179,#3513,.T.);\r
+-#5766=EDGE_CURVE('',#5175,#5155,#366,.T.);\r
+-#5768=EDGE_CURVE('',#5151,#5155,#3531,.T.);\r
+-#5770=EDGE_CURVE('',#5151,#5163,#370,.T.);\r
+-#5772=EDGE_CURVE('',#5159,#5163,#3549,.T.);\r
+-#5774=EDGE_CURVE('',#5159,#5186,#374,.T.);\r
+-#5778=EDGE_CURVE('',#5207,#5208,#378,.T.);\r
+-#5780=EDGE_CURVE('',#5208,#5210,#383,.T.);\r
+-#5782=EDGE_CURVE('',#5210,#5212,#387,.T.);\r
+-#5784=EDGE_CURVE('',#5212,#5207,#392,.T.);\r
+-#5788=EDGE_CURVE('',#5223,#5224,#396,.T.);\r
+-#5790=EDGE_CURVE('',#5224,#5226,#401,.T.);\r
+-#5792=EDGE_CURVE('',#5226,#5228,#405,.T.);\r
+-#5794=EDGE_CURVE('',#5228,#5223,#410,.T.);\r
+-#5798=EDGE_CURVE('',#5239,#5240,#414,.T.);\r
+-#5800=EDGE_CURVE('',#5240,#5242,#419,.T.);\r
+-#5802=EDGE_CURVE('',#5242,#5244,#423,.T.);\r
+-#5804=EDGE_CURVE('',#5244,#5239,#428,.T.);\r
+-#5808=EDGE_CURVE('',#5255,#5256,#432,.T.);\r
+-#5810=EDGE_CURVE('',#5256,#5258,#437,.T.);\r
+-#5812=EDGE_CURVE('',#5258,#5260,#441,.T.);\r
+-#5814=EDGE_CURVE('',#5260,#5255,#446,.T.);\r
+-#5818=EDGE_CURVE('',#5277,#5278,#450,.T.);\r
+-#5820=EDGE_CURVE('',#5282,#5277,#455,.T.);\r
+-#5822=EDGE_CURVE('',#5280,#5282,#459,.T.);\r
+-#5824=EDGE_CURVE('',#5278,#5280,#464,.T.);\r
+-#5828=EDGE_CURVE('',#5305,#5306,#468,.T.);\r
+-#5830=EDGE_CURVE('',#5310,#5305,#473,.T.);\r
+-#5832=EDGE_CURVE('',#5308,#5310,#477,.T.);\r
+-#5834=EDGE_CURVE('',#5306,#5308,#482,.T.);\r
+-#5838=EDGE_CURVE('',#5335,#5336,#486,.T.);\r
+-#5840=EDGE_CURVE('',#5340,#5335,#491,.T.);\r
+-#5842=EDGE_CURVE('',#5338,#5340,#495,.T.);\r
+-#5844=EDGE_CURVE('',#5336,#5338,#500,.T.);\r
+-#5848=EDGE_CURVE('',#5351,#5352,#504,.T.);\r
+-#5850=EDGE_CURVE('',#5356,#5351,#509,.T.);\r
+-#5852=EDGE_CURVE('',#5354,#5356,#513,.T.);\r
+-#5854=EDGE_CURVE('',#5352,#5354,#518,.T.);\r
+-#5858=EDGE_CURVE('',#5367,#5368,#522,.T.);\r
+-#5860=EDGE_CURVE('',#5372,#5367,#527,.T.);\r
+-#5862=EDGE_CURVE('',#5370,#5372,#531,.T.);\r
+-#5864=EDGE_CURVE('',#5368,#5370,#536,.T.);\r
+-#5868=EDGE_CURVE('',#5383,#5384,#540,.T.);\r
+-#5870=EDGE_CURVE('',#5388,#5383,#545,.T.);\r
+-#5872=EDGE_CURVE('',#5386,#5388,#549,.T.);\r
+-#5874=EDGE_CURVE('',#5384,#5386,#554,.T.);\r
+-#5878=EDGE_CURVE('',#5405,#5406,#558,.T.);\r
+-#5880=EDGE_CURVE('',#5406,#5408,#563,.T.);\r
+-#5882=EDGE_CURVE('',#5408,#5410,#567,.T.);\r
+-#5884=EDGE_CURVE('',#5410,#5405,#572,.T.);\r
+-#5888=EDGE_CURVE('',#5455,#5451,#4097,.T.);\r
+-#5890=EDGE_CURVE('',#5324,#5455,#576,.T.);\r
+-#5892=EDGE_CURVE('',#5323,#5324,#581,.T.);\r
+-#5894=EDGE_CURVE('',#5459,#5323,#585,.T.);\r
+-#5896=EDGE_CURVE('',#5463,#5459,#4187,.T.);\r
+-#5898=EDGE_CURVE('',#5436,#5463,#589,.T.);\r
+-#5900=EDGE_CURVE('',#5440,#5436,#4169,.T.);\r
+-#5902=EDGE_CURVE('',#5444,#5440,#593,.T.);\r
+-#5904=EDGE_CURVE('',#5448,#5444,#4151,.T.);\r
+-#5906=EDGE_CURVE('',#5428,#5448,#597,.T.);\r
+-#5908=EDGE_CURVE('',#5432,#5428,#4133,.T.);\r
+-#5910=EDGE_CURVE('',#5420,#5432,#601,.T.);\r
+-#5912=EDGE_CURVE('',#5424,#5420,#4115,.T.);\r
+-#5914=EDGE_CURVE('',#5451,#5424,#605,.T.);\r
+-#5918=EDGE_CURVE('',#5471,#5313,#609,.T.);\r
+-#5920=EDGE_CURVE('',#5467,#5471,#3839,.T.);\r
+-#5922=EDGE_CURVE('',#5316,#5467,#614,.T.);\r
+-#5924=EDGE_CURVE('',#5316,#5314,#619,.T.);\r
+-#5926=EDGE_CURVE('',#5313,#5314,#624,.T.);\r
+-#5930=EDGE_CURVE('',#5479,#5285,#628,.T.);\r
+-#5932=EDGE_CURVE('',#5475,#5479,#3756,.T.);\r
+-#5934=EDGE_CURVE('',#5288,#5475,#633,.T.);\r
+-#5936=EDGE_CURVE('',#5288,#5286,#638,.T.);\r
+-#5938=EDGE_CURVE('',#5285,#5286,#643,.T.);\r
+-#5942=EDGE_CURVE('',#5416,#5487,#648,.T.);\r
+-#5944=EDGE_CURVE('',#5483,#5487,#4058,.T.);\r
+-#5946=EDGE_CURVE('',#5483,#5413,#652,.T.);\r
+-#5948=EDGE_CURVE('',#5413,#5414,#657,.T.);\r
+-#5950=EDGE_CURVE('',#5416,#5414,#662,.T.);\r
+-#5961=EDGE_CURVE('',#4427,#4428,#1298,.T.);\r
+-#5963=EDGE_CURVE('',#4424,#4428,#906,.T.);\r
+-#5965=EDGE_CURVE('',#4423,#4424,#1601,.T.);\r
+-#5968=EDGE_CURVE('',#4390,#4400,#1658,.T.);\r
+-#5970=EDGE_CURVE('',#4387,#4390,#746,.T.);\r
+-#5972=EDGE_CURVE('',#4387,#4388,#750,.T.);\r
+-#5974=EDGE_CURVE('',#4768,#4388,#1698,.T.);\r
+-#5976=EDGE_CURVE('',#4767,#4768,#1230,.T.);\r
+-#5978=EDGE_CURVE('',#4287,#4767,#1746,.T.);\r
+-#5980=EDGE_CURVE('',#4287,#4288,#754,.T.);\r
+-#5982=EDGE_CURVE('',#4288,#4290,#758,.T.);\r
+-#5984=EDGE_CURVE('',#4300,#4290,#1900,.T.);\r
+-#5987=EDGE_CURVE('',#4323,#4324,#1371,.T.);\r
+-#5989=EDGE_CURVE('',#4327,#4323,#914,.T.);\r
+-#5991=EDGE_CURVE('',#4327,#4328,#1344,.T.);\r
+-#5995=EDGE_CURVE('',#4747,#4748,#667,.T.);\r
+-#5997=EDGE_CURVE('',#4748,#4747,#672,.T.);\r
+-#6001=EDGE_CURVE('',#4735,#4736,#677,.T.);\r
+-#6003=EDGE_CURVE('',#4736,#4735,#682,.T.);\r
+-#6007=EDGE_CURVE('',#4755,#4756,#687,.T.);\r
+-#6009=EDGE_CURVE('',#4756,#4755,#692,.T.);\r
+-#6013=EDGE_CURVE('',#4763,#4764,#697,.T.);\r
+-#6015=EDGE_CURVE('',#4764,#4763,#702,.T.);\r
+-#6019=EDGE_CURVE('',#4731,#4732,#707,.T.);\r
+-#6021=EDGE_CURVE('',#4732,#4731,#712,.T.);\r
+-#6025=EDGE_CURVE('',#4723,#4724,#717,.T.);\r
+-#6027=EDGE_CURVE('',#4724,#4723,#722,.T.);\r
+-#6031=EDGE_CURVE('',#4703,#4704,#727,.T.);\r
+-#6033=EDGE_CURVE('',#4704,#4703,#732,.T.);\r
+-#6037=EDGE_CURVE('',#4715,#4716,#737,.T.);\r
+-#6039=EDGE_CURVE('',#4716,#4715,#742,.T.);\r
+-#6043=EDGE_CURVE('',#4947,#4959,#762,.T.);\r
+-#6045=EDGE_CURVE('',#4955,#4959,#3213,.T.);\r
+-#6047=EDGE_CURVE('',#4955,#4967,#766,.T.);\r
+-#6049=EDGE_CURVE('',#4963,#4967,#3195,.T.);\r
+-#6051=EDGE_CURVE('',#4963,#4975,#770,.T.);\r
+-#6053=EDGE_CURVE('',#4971,#4975,#3177,.T.);\r
+-#6055=EDGE_CURVE('',#4971,#4951,#774,.T.);\r
+-#6057=EDGE_CURVE('',#4947,#4951,#3159,.T.);\r
+-#6061=EDGE_CURVE('',#5036,#5048,#778,.T.);\r
+-#6063=EDGE_CURVE('',#5040,#5036,#3256,.T.);\r
+-#6065=EDGE_CURVE('',#5028,#5040,#782,.T.);\r
+-#6067=EDGE_CURVE('',#5032,#5028,#3290,.T.);\r
+-#6069=EDGE_CURVE('',#5052,#5032,#786,.T.);\r
+-#6071=EDGE_CURVE('',#5056,#5052,#3308,.T.);\r
+-#6073=EDGE_CURVE('',#5044,#5056,#790,.T.);\r
+-#6075=EDGE_CURVE('',#5048,#5044,#3326,.T.);\r
+-#6086=EDGE_CURVE('',#4747,#4743,#794,.T.);\r
+-#6088=EDGE_CURVE('',#4743,#4744,#803,.T.);\r
+-#6090=EDGE_CURVE('',#4748,#4744,#798,.T.);\r
+-#6102=EDGE_CURVE('',#4744,#4743,#808,.T.);\r
+-#6124=EDGE_CURVE('',#4735,#4739,#812,.T.);\r
+-#6126=EDGE_CURVE('',#4739,#4740,#821,.T.);\r
+-#6128=EDGE_CURVE('',#4736,#4740,#816,.T.);\r
+-#6140=EDGE_CURVE('',#4740,#4739,#826,.T.);\r
+-#6151=EDGE_CURVE('',#4934,#4940,#830,.T.);\r
+-#6153=EDGE_CURVE('',#4940,#4942,#834,.T.);\r
+-#6155=EDGE_CURVE('',#4938,#4942,#838,.T.);\r
+-#6157=EDGE_CURVE('',#4788,#4938,#1234,.T.);\r
+-#6159=EDGE_CURVE('',#4788,#4393,#842,.T.);\r
+-#6161=EDGE_CURVE('',#4393,#4394,#846,.T.);\r
+-#6163=EDGE_CURVE('',#4394,#4396,#850,.T.);\r
+-#6165=EDGE_CURVE('',#4396,#4398,#854,.T.);\r
+-#6167=EDGE_CURVE('',#4934,#4398,#1178,.T.);\r
+-#6175=EDGE_CURVE('',#5103,#5099,#2946,.T.);\r
+-#6177=EDGE_CURVE('',#5076,#5103,#858,.T.);\r
+-#6179=EDGE_CURVE('',#5080,#5076,#3036,.T.);\r
+-#6181=EDGE_CURVE('',#5084,#5080,#862,.T.);\r
+-#6183=EDGE_CURVE('',#5088,#5084,#3018,.T.);\r
+-#6185=EDGE_CURVE('',#5092,#5088,#866,.T.);\r
+-#6187=EDGE_CURVE('',#5096,#5092,#3000,.T.);\r
+-#6189=EDGE_CURVE('',#5068,#5096,#870,.T.);\r
+-#6191=EDGE_CURVE('',#5072,#5068,#2982,.T.);\r
+-#6193=EDGE_CURVE('',#5060,#5072,#874,.T.);\r
+-#6195=EDGE_CURVE('',#5064,#5060,#2964,.T.);\r
+-#6197=EDGE_CURVE('',#5099,#5064,#878,.T.);\r
+-#6207=EDGE_CURVE('',#4933,#4934,#1174,.T.);\r
+-#6209=EDGE_CURVE('',#4940,#4933,#882,.T.);\r
+-#6221=EDGE_CURVE('',#4432,#4428,#1312,.T.);\r
+-#6223=EDGE_CURVE('',#4267,#4432,#1326,.T.);\r
+-#6225=EDGE_CURVE('',#4267,#4263,#910,.T.);\r
+-#6227=EDGE_CURVE('',#4331,#4263,#1331,.T.);\r
+-#6229=EDGE_CURVE('',#4327,#4331,#1349,.T.);\r
+-#6232=EDGE_CURVE('',#4319,#4323,#1367,.T.);\r
+-#6234=EDGE_CURVE('',#4256,#4319,#918,.T.);\r
+-#6236=EDGE_CURVE('',#4256,#4260,#1638,.T.);\r
+-#6238=EDGE_CURVE('',#4240,#4260,#922,.T.);\r
+-#6240=EDGE_CURVE('',#4240,#4244,#1622,.T.);\r
+-#6242=EDGE_CURVE('',#4420,#4244,#926,.T.);\r
+-#6244=EDGE_CURVE('',#4424,#4420,#1606,.T.);\r
+-#6248=EDGE_CURVE('',#4495,#4496,#951,.T.);\r
+-#6250=EDGE_CURVE('',#4496,#4495,#956,.T.);\r
+-#6254=EDGE_CURVE('',#4567,#4568,#981,.T.);\r
+-#6256=EDGE_CURVE('',#4568,#4567,#986,.T.);\r
+-#6260=EDGE_CURVE('',#4615,#4616,#1011,.T.);\r
+-#6262=EDGE_CURVE('',#4616,#4615,#1016,.T.);\r
+-#6266=EDGE_CURVE('',#4647,#4648,#1021,.T.);\r
+-#6268=EDGE_CURVE('',#4648,#4647,#1026,.T.);\r
+-#6272=EDGE_CURVE('',#4659,#4660,#1031,.T.);\r
+-#6274=EDGE_CURVE('',#4660,#4659,#1036,.T.);\r
+-#6286=EDGE_CURVE('',#4398,#4447,#1182,.T.);\r
+-#6288=EDGE_CURVE('',#4443,#4447,#1646,.T.);\r
+-#6290=EDGE_CURVE('',#4443,#4407,#1186,.T.);\r
+-#6292=EDGE_CURVE('',#4403,#4407,#1547,.T.);\r
+-#6294=EDGE_CURVE('',#4232,#4403,#1190,.T.);\r
+-#6296=EDGE_CURVE('',#4232,#4236,#1572,.T.);\r
+-#6298=EDGE_CURVE('',#4248,#4236,#1194,.T.);\r
+-#6300=EDGE_CURVE('',#4248,#4252,#1588,.T.);\r
+-#6302=EDGE_CURVE('',#4312,#4252,#1198,.T.);\r
+-#6304=EDGE_CURVE('',#4316,#4312,#1394,.T.);\r
+-#6306=EDGE_CURVE('',#4344,#4316,#1202,.T.);\r
+-#6308=EDGE_CURVE('',#4344,#4348,#1920,.T.);\r
+-#6310=EDGE_CURVE('',#4298,#4348,#1206,.T.);\r
+-#6312=EDGE_CURVE('',#4298,#4920,#1210,.T.);\r
+-#6314=EDGE_CURVE('',#4919,#4920,#1214,.T.);\r
+-#6316=EDGE_CURVE('',#4919,#4923,#1218,.T.);\r
+-#6318=EDGE_CURVE('',#4923,#4924,#1222,.T.);\r
+-#6320=EDGE_CURVE('',#4924,#4786,#1226,.T.);\r
+-#6322=EDGE_CURVE('',#4767,#4786,#1742,.T.);\r
+-#6325=EDGE_CURVE('',#4768,#4788,#1694,.T.);\r
+-#6328=EDGE_CURVE('',#4937,#4938,#1238,.T.);\r
+-#6330=EDGE_CURVE('',#4933,#4937,#1242,.T.);\r
+-#6334=EDGE_CURVE('',#4373,#4374,#887,.T.);\r
+-#6336=EDGE_CURVE('',#4374,#4373,#892,.T.);\r
+-#6340=EDGE_CURVE('',#4383,#4384,#897,.T.);\r
+-#6342=EDGE_CURVE('',#4384,#4383,#902,.T.);\r
+-#6346=EDGE_CURVE('',#4473,#4474,#931,.T.);\r
+-#6348=EDGE_CURVE('',#4474,#4473,#936,.T.);\r
+-#6352=EDGE_CURVE('',#4483,#4484,#941,.T.);\r
+-#6354=EDGE_CURVE('',#4484,#4483,#946,.T.);\r
+-#6358=EDGE_CURVE('',#4543,#4544,#961,.T.);\r
+-#6360=EDGE_CURVE('',#4544,#4543,#966,.T.);\r
+-#6364=EDGE_CURVE('',#4555,#4556,#971,.T.);\r
+-#6366=EDGE_CURVE('',#4556,#4555,#976,.T.);\r
+-#6370=EDGE_CURVE('',#4587,#4588,#991,.T.);\r
+-#6372=EDGE_CURVE('',#4588,#4587,#996,.T.);\r
+-#6376=EDGE_CURVE('',#4599,#4600,#1001,.T.);\r
+-#6378=EDGE_CURVE('',#4600,#4599,#1006,.T.);\r
+-#6382=EDGE_CURVE('',#4671,#4672,#1041,.T.);\r
+-#6384=EDGE_CURVE('',#4672,#4671,#1046,.T.);\r
+-#6388=EDGE_CURVE('',#4683,#4684,#1051,.T.);\r
+-#6390=EDGE_CURVE('',#4684,#4683,#1056,.T.);\r
+-#6394=EDGE_CURVE('',#4695,#4696,#1061,.T.);\r
+-#6396=EDGE_CURVE('',#4696,#4695,#1066,.T.);\r
+-#6400=EDGE_CURVE('',#4279,#4800,#1070,.T.);\r
+-#6402=EDGE_CURVE('',#4804,#4800,#1448,.T.);\r
+-#6404=EDGE_CURVE('',#4795,#4804,#1074,.T.);\r
+-#6406=EDGE_CURVE('',#4791,#4795,#1421,.T.);\r
+-#6408=EDGE_CURVE('',#4791,#4275,#1078,.T.);\r
+-#6410=EDGE_CURVE('',#4271,#4275,#1475,.T.);\r
+-#6412=EDGE_CURVE('',#4271,#4283,#1082,.T.);\r
+-#6414=EDGE_CURVE('',#4279,#4283,#1457,.T.);\r
+-#6418=EDGE_CURVE('',#4811,#4820,#1086,.T.);\r
+-#6420=EDGE_CURVE('',#4807,#4811,#1493,.T.);\r
+-#6422=EDGE_CURVE('',#4807,#4412,#1090,.T.);\r
+-#6424=EDGE_CURVE('',#4416,#4412,#1538,.T.);\r
+-#6426=EDGE_CURVE('',#4416,#4439,#1094,.T.);\r
+-#6428=EDGE_CURVE('',#4435,#4439,#2124,.T.);\r
+-#6430=EDGE_CURVE('',#4435,#4780,#1098,.T.);\r
+-#6432=EDGE_CURVE('',#4784,#4780,#1716,.T.);\r
+-#6434=EDGE_CURVE('',#4775,#4784,#1720,.T.);\r
+-#6436=EDGE_CURVE('',#4771,#4775,#1729,.T.);\r
+-#6438=EDGE_CURVE('',#4336,#4771,#1102,.T.);\r
+-#6440=EDGE_CURVE('',#4336,#4340,#1762,.T.);\r
+-#6442=EDGE_CURVE('',#4307,#4340,#1106,.T.);\r
+-#6444=EDGE_CURVE('',#4303,#4307,#1403,.T.);\r
+-#6446=EDGE_CURVE('',#4303,#4816,#1110,.T.);\r
+-#6448=EDGE_CURVE('',#4820,#4816,#1520,.T.);\r
+-#6452=EDGE_CURVE('',#4831,#4832,#1115,.T.);\r
+-#6454=EDGE_CURVE('',#4832,#4831,#1120,.T.);\r
+-#6458=EDGE_CURVE('',#4863,#4864,#1125,.T.);\r
+-#6460=EDGE_CURVE('',#4864,#4863,#1130,.T.);\r
+-#6464=EDGE_CURVE('',#4875,#4876,#1135,.T.);\r
+-#6466=EDGE_CURVE('',#4876,#4875,#1140,.T.);\r
+-#6470=EDGE_CURVE('',#4887,#4888,#1145,.T.);\r
+-#6472=EDGE_CURVE('',#4888,#4887,#1150,.T.);\r
+-#6476=EDGE_CURVE('',#4899,#4900,#1155,.T.);\r
+-#6478=EDGE_CURVE('',#4900,#4899,#1160,.T.);\r
+-#6482=EDGE_CURVE('',#4911,#4912,#1165,.T.);\r
+-#6484=EDGE_CURVE('',#4912,#4911,#1170,.T.);\r
+-#6495=EDGE_CURVE('',#4368,#4374,#1250,.T.);\r
+-#6497=EDGE_CURVE('',#4370,#4368,#1268,.T.);\r
+-#6499=EDGE_CURVE('',#4370,#4373,#1246,.T.);\r
+-#6511=EDGE_CURVE('',#4370,#4368,#1259,.T.);\r
+-#6522=EDGE_CURVE('',#4367,#4368,#1254,.T.);\r
+-#6525=EDGE_CURVE('',#4367,#4370,#1263,.T.);\r
+-#6547=EDGE_CURVE('',#4378,#4384,#1276,.T.);\r
+-#6549=EDGE_CURVE('',#4380,#4378,#1294,.T.);\r
+-#6551=EDGE_CURVE('',#4380,#4383,#1272,.T.);\r
+-#6563=EDGE_CURVE('',#4380,#4378,#1285,.T.);\r
+-#6574=EDGE_CURVE('',#4377,#4378,#1280,.T.);\r
+-#6577=EDGE_CURVE('',#4377,#4380,#1289,.T.);\r
+-#6600=EDGE_CURVE('',#4431,#4432,#1307,.T.);\r
+-#6613=EDGE_CURVE('',#4267,#4268,#1321,.T.);\r
+-#6624=EDGE_CURVE('',#4263,#4264,#1335,.T.);\r
+-#6637=EDGE_CURVE('',#4331,#4332,#1353,.T.);\r
+-#6662=EDGE_CURVE('',#4319,#4320,#1362,.T.);\r
+-#6675=EDGE_CURVE('',#4311,#4312,#1380,.T.);\r
+-#6678=EDGE_CURVE('',#4251,#4252,#1584,.T.);\r
+-#6691=EDGE_CURVE('',#4255,#4256,#1626,.T.);\r
+-#6704=EDGE_CURVE('',#4315,#4316,#1389,.T.);\r
+-#6715=EDGE_CURVE('',#4307,#4308,#1407,.T.);\r
+-#6718=EDGE_CURVE('',#4339,#4340,#1758,.T.);\r
+-#6731=EDGE_CURVE('',#4343,#4344,#1908,.T.);\r
+-#6742=EDGE_CURVE('',#4303,#4304,#1398,.T.);\r
+-#6755=EDGE_CURVE('',#4791,#4792,#1416,.T.);\r
+-#6758=EDGE_CURVE('',#4275,#4276,#1479,.T.);\r
+-#6769=EDGE_CURVE('',#4815,#4816,#1506,.T.);\r
+-#6784=EDGE_CURVE('',#4795,#4796,#1425,.T.);\r
+-#6797=EDGE_CURVE('',#4803,#4804,#1443,.T.);\r
+-#6808=EDGE_CURVE('',#4799,#4800,#1434,.T.);\r
+-#6823=EDGE_CURVE('',#4279,#4280,#1452,.T.);\r
+-#6834=EDGE_CURVE('',#4807,#4808,#1488,.T.);\r
+-#6837=EDGE_CURVE('',#4411,#4412,#1524,.T.);\r
+-#6850=EDGE_CURVE('',#4283,#4284,#1461,.T.);\r
+-#6861=EDGE_CURVE('',#4271,#4272,#1470,.T.);\r
+-#6888=EDGE_CURVE('',#4811,#4812,#1497,.T.);\r
+-#6901=EDGE_CURVE('',#4819,#4820,#1515,.T.);\r
+-#6926=EDGE_CURVE('',#4415,#4416,#1533,.T.);\r
+-#6937=EDGE_CURVE('',#4407,#4408,#1551,.T.);\r
+-#6940=EDGE_CURVE('',#4443,#4444,#1642,.T.);\r
+-#6953=EDGE_CURVE('',#4439,#4440,#2128,.T.);\r
+-#6964=EDGE_CURVE('',#4403,#4404,#1542,.T.);\r
+-#6979=EDGE_CURVE('',#4231,#4232,#1560,.T.);\r
+-#6990=EDGE_CURVE('',#4419,#4420,#1592,.T.);\r
+-#6993=EDGE_CURVE('',#4243,#4244,#1618,.T.);\r
+-#7006=EDGE_CURVE('',#4235,#4236,#1568,.T.);\r
+-#7018=EDGE_CURVE('',#4247,#4248,#1576,.T.);\r
+-#7054=EDGE_CURVE('',#4239,#4240,#1610,.T.);\r
+-#7070=EDGE_CURVE('',#4259,#4260,#1634,.T.);\r
+-#7094=EDGE_CURVE('',#4447,#4448,#1650,.T.);\r
+-#7110=EDGE_CURVE('',#4390,#4396,#1662,.T.);\r
+-#7123=EDGE_CURVE('',#4387,#4394,#1666,.T.);\r
+-#7136=EDGE_CURVE('',#4388,#4393,#1670,.T.);\r
+-#7140=EDGE_CURVE('',#4455,#4456,#1675,.T.);\r
+-#7142=EDGE_CURVE('',#4456,#4455,#1680,.T.);\r
+-#7146=EDGE_CURVE('',#4463,#4464,#1685,.T.);\r
+-#7148=EDGE_CURVE('',#4464,#4463,#1690,.T.);\r
+-#7158=EDGE_CURVE('',#4779,#4780,#1702,.T.);\r
+-#7161=EDGE_CURVE('',#4435,#4436,#2120,.T.);\r
+-#7186=EDGE_CURVE('',#4783,#4784,#1711,.T.);\r
+-#7197=EDGE_CURVE('',#4775,#4776,#1733,.T.);\r
+-#7210=EDGE_CURVE('',#4771,#4772,#1724,.T.);\r
+-#7225=EDGE_CURVE('',#4335,#4336,#1750,.T.);\r
+-#7237=EDGE_CURVE('',#4786,#4293,#1792,.T.);\r
+-#7239=EDGE_CURVE('',#4287,#4293,#1928,.T.);\r
+-#7262=EDGE_CURVE('',#4920,#4926,#1776,.T.);\r
+-#7265=EDGE_CURVE('',#4296,#4298,#1780,.T.);\r
+-#7267=EDGE_CURVE('',#4294,#4296,#1784,.T.);\r
+-#7269=EDGE_CURVE('',#4293,#4294,#1788,.T.);\r
+-#7273=EDGE_CURVE('',#4924,#4928,#1796,.T.);\r
+-#7275=EDGE_CURVE('',#4926,#4928,#1800,.T.);\r
+-#7279=EDGE_CURVE('',#4707,#4708,#1767,.T.);\r
+-#7281=EDGE_CURVE('',#4708,#4707,#1772,.T.);\r
+-#7285=EDGE_CURVE('',#5020,#5022,#1993,.T.);\r
+-#7287=EDGE_CURVE('',#5020,#4983,#1804,.T.);\r
+-#7289=EDGE_CURVE('',#4979,#4983,#2107,.T.);\r
+-#7291=EDGE_CURVE('',#4979,#4991,#1808,.T.);\r
+-#7293=EDGE_CURVE('',#4987,#4991,#2089,.T.);\r
+-#7295=EDGE_CURVE('',#4987,#5015,#1812,.T.);\r
+-#7297=EDGE_CURVE('',#5011,#5015,#2071,.T.);\r
+-#7299=EDGE_CURVE('',#5011,#5007,#1816,.T.);\r
+-#7301=EDGE_CURVE('',#5003,#5007,#2053,.T.);\r
+-#7303=EDGE_CURVE('',#5003,#4999,#1820,.T.);\r
+-#7305=EDGE_CURVE('',#4995,#4999,#2035,.T.);\r
+-#7307=EDGE_CURVE('',#4995,#5022,#1824,.T.);\r
+-#7318=EDGE_CURVE('',#4704,#4708,#1832,.T.);\r
+-#7321=EDGE_CURVE('',#4703,#4707,#1828,.T.);\r
+-#7345=EDGE_CURVE('',#4926,#4919,#1836,.T.);\r
+-#7358=EDGE_CURVE('',#4928,#4923,#1860,.T.);\r
+-#7362=EDGE_CURVE('',#4929,#4930,#1846,.T.);\r
+-#7364=EDGE_CURVE('',#4930,#4929,#1856,.T.);\r
+-#7385=EDGE_CURVE('',#4930,#4531,#1868,.T.);\r
+-#7388=EDGE_CURVE('',#4532,#4929,#1864,.T.);\r
+-#7390=EDGE_CURVE('',#4531,#4532,#1873,.T.);\r
+-#7403=EDGE_CURVE('',#4532,#4531,#1878,.T.);\r
+-#7417=EDGE_CURVE('',#4535,#4536,#1883,.T.);\r
+-#7419=EDGE_CURVE('',#4536,#4535,#1888,.T.);\r
+-#7430=EDGE_CURVE('',#4536,#4504,#1896,.T.);\r
+-#7433=EDGE_CURVE('',#4535,#4503,#1892,.T.);\r
+-#7457=EDGE_CURVE('',#4347,#4348,#1916,.T.);\r
+-#7461=EDGE_CURVE('',#4290,#4296,#1904,.T.);\r
+-#7484=EDGE_CURVE('',#4288,#4294,#1924,.T.);\r
+-#7502=EDGE_CURVE('',#4355,#4356,#1933,.T.);\r
+-#7504=EDGE_CURVE('',#4356,#4355,#1938,.T.);\r
+-#7508=EDGE_CURVE('',#4363,#4364,#1943,.T.);\r
+-#7510=EDGE_CURVE('',#4364,#4363,#1948,.T.);\r
+-#7521=EDGE_CURVE('',#4356,#4352,#1956,.T.);\r
+-#7523=EDGE_CURVE('',#4351,#4352,#1961,.T.);\r
+-#7525=EDGE_CURVE('',#4355,#4351,#1952,.T.);\r
+-#7537=EDGE_CURVE('',#4352,#4351,#1966,.T.);\r
+-#7559=EDGE_CURVE('',#4364,#4360,#1974,.T.);\r
+-#7561=EDGE_CURVE('',#4359,#4360,#1979,.T.);\r
+-#7563=EDGE_CURVE('',#4363,#4359,#1970,.T.);\r
+-#7575=EDGE_CURVE('',#4360,#4359,#1984,.T.);\r
+-#7596=EDGE_CURVE('',#5019,#5020,#1988,.T.);\r
+-#7599=EDGE_CURVE('',#5024,#5022,#1997,.T.);\r
+-#7601=EDGE_CURVE('',#5024,#5019,#2002,.T.);\r
+-#7612=EDGE_CURVE('',#5019,#4984,#2006,.T.);\r
+-#7614=EDGE_CURVE('',#4983,#4984,#2111,.T.);\r
+-#7627=EDGE_CURVE('',#4996,#5024,#2010,.T.);\r
+-#7629=EDGE_CURVE('',#5000,#4996,#2044,.T.);\r
+-#7631=EDGE_CURVE('',#5004,#5000,#2014,.T.);\r
+-#7633=EDGE_CURVE('',#5008,#5004,#2062,.T.);\r
+-#7635=EDGE_CURVE('',#5012,#5008,#2018,.T.);\r
+-#7637=EDGE_CURVE('',#5016,#5012,#2080,.T.);\r
+-#7639=EDGE_CURVE('',#4988,#5016,#2022,.T.);\r
+-#7641=EDGE_CURVE('',#4992,#4988,#2098,.T.);\r
+-#7643=EDGE_CURVE('',#4980,#4992,#2026,.T.);\r
+-#7645=EDGE_CURVE('',#4984,#4980,#2116,.T.);\r
+-#7657=EDGE_CURVE('',#4995,#4996,#2030,.T.);\r
+-#7670=EDGE_CURVE('',#4999,#5000,#2039,.T.);\r
+-#7683=EDGE_CURVE('',#5003,#5004,#2048,.T.);\r
+-#7696=EDGE_CURVE('',#5007,#5008,#2057,.T.);\r
+-#7709=EDGE_CURVE('',#5011,#5012,#2066,.T.);\r
+-#7722=EDGE_CURVE('',#5015,#5016,#2075,.T.);\r
+-#7733=EDGE_CURVE('',#4987,#4988,#2084,.T.);\r
+-#7748=EDGE_CURVE('',#4991,#4992,#2093,.T.);\r
+-#7759=EDGE_CURVE('',#4979,#4980,#2102,.T.);\r
+-#7797=EDGE_CURVE('',#4455,#4451,#2136,.T.);\r
+-#7799=EDGE_CURVE('',#4451,#4452,#2145,.T.);\r
+-#7801=EDGE_CURVE('',#4456,#4452,#2140,.T.);\r
+-#7813=EDGE_CURVE('',#4452,#4451,#2150,.T.);\r
+-#7835=EDGE_CURVE('',#4463,#4459,#2154,.T.);\r
+-#7837=EDGE_CURVE('',#4459,#4460,#2163,.T.);\r
+-#7839=EDGE_CURVE('',#4464,#4460,#2158,.T.);\r
+-#7851=EDGE_CURVE('',#4460,#4459,#2168,.T.);\r
+-#7873=EDGE_CURVE('',#4470,#4473,#2176,.T.);\r
+-#7875=EDGE_CURVE('',#4470,#4468,#2194,.T.);\r
+-#7877=EDGE_CURVE('',#4468,#4474,#2172,.T.);\r
+-#7889=EDGE_CURVE('',#4470,#4468,#2189,.T.);\r
+-#7900=EDGE_CURVE('',#4467,#4468,#2180,.T.);\r
+-#7902=EDGE_CURVE('',#4467,#4470,#2184,.T.);\r
+-#7925=EDGE_CURVE('',#4480,#4483,#2202,.T.);\r
+-#7927=EDGE_CURVE('',#4480,#4478,#2220,.T.);\r
+-#7929=EDGE_CURVE('',#4478,#4484,#2198,.T.);\r
+-#7941=EDGE_CURVE('',#4480,#4478,#2215,.T.);\r
+-#7952=EDGE_CURVE('',#4477,#4478,#2206,.T.);\r
+-#7954=EDGE_CURVE('',#4477,#4480,#2210,.T.);\r
+-#7977=EDGE_CURVE('',#4496,#4492,#2228,.T.);\r
+-#7979=EDGE_CURVE('',#4491,#4492,#2233,.T.);\r
+-#7981=EDGE_CURVE('',#4495,#4491,#2224,.T.);\r
+-#7993=EDGE_CURVE('',#4492,#4491,#2238,.T.);\r
+-#8008=EDGE_CURVE('',#4499,#4500,#2243,.T.);\r
+-#8010=EDGE_CURVE('',#4500,#4499,#2248,.T.);\r
+-#8021=EDGE_CURVE('',#4500,#4488,#2256,.T.);\r
+-#8024=EDGE_CURVE('',#4499,#4487,#2252,.T.);\r
+-#8047=EDGE_CURVE('',#4544,#4540,#2264,.T.);\r
+-#8049=EDGE_CURVE('',#4539,#4540,#2269,.T.);\r
+-#8051=EDGE_CURVE('',#4543,#4539,#2260,.T.);\r
+-#8063=EDGE_CURVE('',#4540,#4539,#2274,.T.);\r
+-#8078=EDGE_CURVE('',#4547,#4548,#2279,.T.);\r
+-#8080=EDGE_CURVE('',#4548,#4547,#2284,.T.);\r
+-#8091=EDGE_CURVE('',#4548,#4508,#2292,.T.);\r
+-#8094=EDGE_CURVE('',#4547,#4507,#2288,.T.);\r
+-#8117=EDGE_CURVE('',#4556,#4552,#2300,.T.);\r
+-#8119=EDGE_CURVE('',#4551,#4552,#2305,.T.);\r
+-#8121=EDGE_CURVE('',#4555,#4551,#2296,.T.);\r
+-#8133=EDGE_CURVE('',#4552,#4551,#2310,.T.);\r
+-#8148=EDGE_CURVE('',#4559,#4560,#2315,.T.);\r
+-#8150=EDGE_CURVE('',#4560,#4559,#2320,.T.);\r
+-#8161=EDGE_CURVE('',#4560,#4512,#2328,.T.);\r
+-#8164=EDGE_CURVE('',#4559,#4511,#2324,.T.);\r
+-#8187=EDGE_CURVE('',#4568,#4564,#2336,.T.);\r
+-#8189=EDGE_CURVE('',#4563,#4564,#2341,.T.);\r
+-#8191=EDGE_CURVE('',#4567,#4563,#2332,.T.);\r
+-#8203=EDGE_CURVE('',#4564,#4563,#2346,.T.);\r
+-#8218=EDGE_CURVE('',#4571,#4572,#2351,.T.);\r
+-#8220=EDGE_CURVE('',#4572,#4571,#2356,.T.);\r
+-#8231=EDGE_CURVE('',#4572,#4516,#2364,.T.);\r
+-#8234=EDGE_CURVE('',#4571,#4515,#2360,.T.);\r
+-#8257=EDGE_CURVE('',#4588,#4584,#2372,.T.);\r
+-#8259=EDGE_CURVE('',#4583,#4584,#2377,.T.);\r
+-#8261=EDGE_CURVE('',#4587,#4583,#2368,.T.);\r
+-#8273=EDGE_CURVE('',#4584,#4583,#2382,.T.);\r
+-#8288=EDGE_CURVE('',#4591,#4592,#2387,.T.);\r
+-#8290=EDGE_CURVE('',#4592,#4591,#2392,.T.);\r
+-#8301=EDGE_CURVE('',#4592,#4524,#2400,.T.);\r
+-#8304=EDGE_CURVE('',#4591,#4523,#2396,.T.);\r
+-#8327=EDGE_CURVE('',#4600,#4596,#2408,.T.);\r
+-#8329=EDGE_CURVE('',#4595,#4596,#2413,.T.);\r
+-#8331=EDGE_CURVE('',#4599,#4595,#2404,.T.);\r
+-#8343=EDGE_CURVE('',#4596,#4595,#2418,.T.);\r
+-#8358=EDGE_CURVE('',#4603,#4604,#2423,.T.);\r
+-#8360=EDGE_CURVE('',#4604,#4603,#2428,.T.);\r
+-#8371=EDGE_CURVE('',#4604,#4528,#2436,.T.);\r
+-#8374=EDGE_CURVE('',#4603,#4527,#2432,.T.);\r
+-#8397=EDGE_CURVE('',#4616,#4612,#2444,.T.);\r
+-#8399=EDGE_CURVE('',#4611,#4612,#2449,.T.);\r
+-#8401=EDGE_CURVE('',#4615,#4611,#2440,.T.);\r
+-#8413=EDGE_CURVE('',#4612,#4611,#2454,.T.);\r
+-#8428=EDGE_CURVE('',#4619,#4620,#2459,.T.);\r
+-#8430=EDGE_CURVE('',#4620,#4619,#2464,.T.);\r
+-#8441=EDGE_CURVE('',#4620,#4608,#2472,.T.);\r
+-#8444=EDGE_CURVE('',#4619,#4607,#2468,.T.);\r
+-#8467=EDGE_CURVE('',#4648,#4644,#2480,.T.);\r
+-#8469=EDGE_CURVE('',#4643,#4644,#2485,.T.);\r
+-#8471=EDGE_CURVE('',#4647,#4643,#2476,.T.);\r
+-#8483=EDGE_CURVE('',#4644,#4643,#2490,.T.);\r
+-#8498=EDGE_CURVE('',#4651,#4652,#2495,.T.);\r
+-#8500=EDGE_CURVE('',#4652,#4651,#2500,.T.);\r
+-#8511=EDGE_CURVE('',#4652,#4624,#2508,.T.);\r
+-#8514=EDGE_CURVE('',#4651,#4623,#2504,.T.);\r
+-#8537=EDGE_CURVE('',#4660,#4656,#2516,.T.);\r
+-#8539=EDGE_CURVE('',#4655,#4656,#2521,.T.);\r
+-#8541=EDGE_CURVE('',#4659,#4655,#2512,.T.);\r
+-#8553=EDGE_CURVE('',#4656,#4655,#2526,.T.);\r
+-#8568=EDGE_CURVE('',#4663,#4664,#2531,.T.);\r
+-#8570=EDGE_CURVE('',#4664,#4663,#2536,.T.);\r
+-#8581=EDGE_CURVE('',#4664,#4636,#2544,.T.);\r
+-#8584=EDGE_CURVE('',#4663,#4635,#2540,.T.);\r
+-#8607=EDGE_CURVE('',#4672,#4668,#2552,.T.);\r
+-#8609=EDGE_CURVE('',#4667,#4668,#2557,.T.);\r
+-#8611=EDGE_CURVE('',#4671,#4667,#2548,.T.);\r
+-#8623=EDGE_CURVE('',#4668,#4667,#2562,.T.);\r
+-#8638=EDGE_CURVE('',#4675,#4676,#2567,.T.);\r
+-#8640=EDGE_CURVE('',#4676,#4675,#2572,.T.);\r
+-#8651=EDGE_CURVE('',#4676,#4628,#2580,.T.);\r
+-#8654=EDGE_CURVE('',#4675,#4627,#2576,.T.);\r
+-#8677=EDGE_CURVE('',#4684,#4680,#2588,.T.);\r
+-#8679=EDGE_CURVE('',#4679,#4680,#2593,.T.);\r
+-#8681=EDGE_CURVE('',#4683,#4679,#2584,.T.);\r
+-#8693=EDGE_CURVE('',#4680,#4679,#2598,.T.);\r
+-#8708=EDGE_CURVE('',#4687,#4688,#2603,.T.);\r
+-#8710=EDGE_CURVE('',#4688,#4687,#2608,.T.);\r
+-#8721=EDGE_CURVE('',#4688,#4632,#2616,.T.);\r
+-#8724=EDGE_CURVE('',#4687,#4631,#2612,.T.);\r
+-#8747=EDGE_CURVE('',#4696,#4692,#2624,.T.);\r
+-#8749=EDGE_CURVE('',#4691,#4692,#2629,.T.);\r
+-#8751=EDGE_CURVE('',#4695,#4691,#2620,.T.);\r
+-#8763=EDGE_CURVE('',#4692,#4691,#2634,.T.);\r
+-#8778=EDGE_CURVE('',#4699,#4700,#2639,.T.);\r
+-#8780=EDGE_CURVE('',#4700,#4699,#2644,.T.);\r
+-#8791=EDGE_CURVE('',#4700,#4640,#2652,.T.);\r
+-#8794=EDGE_CURVE('',#4699,#4639,#2648,.T.);\r
+-#8817=EDGE_CURVE('',#4832,#4828,#2660,.T.);\r
+-#8819=EDGE_CURVE('',#4827,#4828,#2665,.T.);\r
+-#8821=EDGE_CURVE('',#4831,#4827,#2656,.T.);\r
+-#8833=EDGE_CURVE('',#4828,#4827,#2670,.T.);\r
+-#8848=EDGE_CURVE('',#4835,#4836,#2675,.T.);\r
+-#8850=EDGE_CURVE('',#4836,#4835,#2680,.T.);\r
+-#8861=EDGE_CURVE('',#4836,#4824,#2688,.T.);\r
+-#8864=EDGE_CURVE('',#4835,#4823,#2684,.T.);\r
+-#8887=EDGE_CURVE('',#4864,#4860,#2696,.T.);\r
+-#8889=EDGE_CURVE('',#4859,#4860,#2701,.T.);\r
+-#8891=EDGE_CURVE('',#4863,#4859,#2692,.T.);\r
+-#8903=EDGE_CURVE('',#4860,#4859,#2706,.T.);\r
+-#8918=EDGE_CURVE('',#4867,#4868,#2711,.T.);\r
+-#8920=EDGE_CURVE('',#4868,#4867,#2716,.T.);\r
+-#8931=EDGE_CURVE('',#4868,#4840,#2724,.T.);\r
+-#8934=EDGE_CURVE('',#4867,#4839,#2720,.T.);\r
+-#8957=EDGE_CURVE('',#4876,#4872,#2732,.T.);\r
+-#8959=EDGE_CURVE('',#4871,#4872,#2737,.T.);\r
+-#8961=EDGE_CURVE('',#4875,#4871,#2728,.T.);\r
+-#8973=EDGE_CURVE('',#4872,#4871,#2742,.T.);\r
+-#8988=EDGE_CURVE('',#4879,#4880,#2747,.T.);\r
+-#8990=EDGE_CURVE('',#4880,#4879,#2752,.T.);\r
+-#9001=EDGE_CURVE('',#4880,#4844,#2760,.T.);\r
+-#9004=EDGE_CURVE('',#4879,#4843,#2756,.T.);\r
+-#9027=EDGE_CURVE('',#4888,#4884,#2768,.T.);\r
+-#9029=EDGE_CURVE('',#4883,#4884,#2773,.T.);\r
+-#9031=EDGE_CURVE('',#4887,#4883,#2764,.T.);\r
+-#9043=EDGE_CURVE('',#4884,#4883,#2778,.T.);\r
+-#9058=EDGE_CURVE('',#4891,#4892,#2783,.T.);\r
+-#9060=EDGE_CURVE('',#4892,#4891,#2788,.T.);\r
+-#9071=EDGE_CURVE('',#4892,#4848,#2796,.T.);\r
+-#9074=EDGE_CURVE('',#4891,#4847,#2792,.T.);\r
+-#9097=EDGE_CURVE('',#4900,#4896,#2804,.T.);\r
+-#9099=EDGE_CURVE('',#4895,#4896,#2809,.T.);\r
+-#9101=EDGE_CURVE('',#4899,#4895,#2800,.T.);\r
+-#9113=EDGE_CURVE('',#4896,#4895,#2814,.T.);\r
+-#9128=EDGE_CURVE('',#4903,#4904,#2819,.T.);\r
+-#9130=EDGE_CURVE('',#4904,#4903,#2824,.T.);\r
+-#9141=EDGE_CURVE('',#4904,#4852,#2832,.T.);\r
+-#9144=EDGE_CURVE('',#4903,#4851,#2828,.T.);\r
+-#9167=EDGE_CURVE('',#4912,#4908,#2840,.T.);\r
+-#9169=EDGE_CURVE('',#4907,#4908,#2845,.T.);\r
+-#9171=EDGE_CURVE('',#4911,#4907,#2836,.T.);\r
+-#9183=EDGE_CURVE('',#4908,#4907,#2850,.T.);\r
+-#9198=EDGE_CURVE('',#4915,#4916,#2855,.T.);\r
+-#9200=EDGE_CURVE('',#4916,#4915,#2860,.T.);\r
+-#9211=EDGE_CURVE('',#4916,#4856,#2868,.T.);\r
+-#9214=EDGE_CURVE('',#4915,#4855,#2864,.T.);\r
+-#9238=EDGE_CURVE('',#4942,#4937,#2872,.T.);\r
+-#9254=EDGE_CURVE('',#4943,#4944,#2882,.T.);\r
+-#9256=EDGE_CURVE('',#4944,#4943,#2892,.T.);\r
+-#9266=EDGE_CURVE('',#4943,#4575,#2900,.T.);\r
+-#9269=EDGE_CURVE('',#4576,#4944,#2896,.T.);\r
+-#9271=EDGE_CURVE('',#4575,#4576,#2905,.T.);\r
+-#9284=EDGE_CURVE('',#4576,#4575,#2910,.T.);\r
+-#9298=EDGE_CURVE('',#4579,#4580,#2915,.T.);\r
+-#9300=EDGE_CURVE('',#4580,#4579,#2920,.T.);\r
+-#9311=EDGE_CURVE('',#4580,#4520,#2928,.T.);\r
+-#9314=EDGE_CURVE('',#4579,#4519,#2924,.T.);\r
+-#9336=EDGE_CURVE('',#5099,#5100,#2932,.T.);\r
+-#9338=EDGE_CURVE('',#5100,#5104,#2937,.T.);\r
+-#9340=EDGE_CURVE('',#5103,#5104,#2941,.T.);\r
+-#9353=EDGE_CURVE('',#5062,#5064,#2959,.T.);\r
+-#9355=EDGE_CURVE('',#5100,#5062,#3044,.T.);\r
+-#9365=EDGE_CURVE('',#5059,#5060,#2950,.T.);\r
+-#9367=EDGE_CURVE('',#5059,#5062,#2955,.T.);\r
+-#9381=EDGE_CURVE('',#5070,#5072,#2977,.T.);\r
+-#9383=EDGE_CURVE('',#5059,#5070,#3048,.T.);\r
+-#9393=EDGE_CURVE('',#5067,#5068,#2968,.T.);\r
+-#9395=EDGE_CURVE('',#5067,#5070,#2973,.T.);\r
+-#9409=EDGE_CURVE('',#5094,#5096,#2995,.T.);\r
+-#9411=EDGE_CURVE('',#5067,#5094,#3052,.T.);\r
+-#9421=EDGE_CURVE('',#5091,#5092,#2986,.T.);\r
+-#9423=EDGE_CURVE('',#5091,#5094,#2991,.T.);\r
+-#9435=EDGE_CURVE('',#5086,#5088,#3013,.T.);\r
+-#9437=EDGE_CURVE('',#5091,#5086,#3056,.T.);\r
+-#9449=EDGE_CURVE('',#5083,#5084,#3004,.T.);\r
+-#9451=EDGE_CURVE('',#5083,#5086,#3009,.T.);\r
+-#9463=EDGE_CURVE('',#5078,#5080,#3031,.T.);\r
+-#9465=EDGE_CURVE('',#5083,#5078,#3060,.T.);\r
+-#9477=EDGE_CURVE('',#5075,#5076,#3022,.T.);\r
+-#9479=EDGE_CURVE('',#5075,#5078,#3027,.T.);\r
+-#9492=EDGE_CURVE('',#5075,#5104,#3040,.T.);\r
+-#9525=EDGE_CURVE('',#4755,#4751,#3064,.T.);\r
+-#9527=EDGE_CURVE('',#4751,#4752,#3073,.T.);\r
+-#9529=EDGE_CURVE('',#4756,#4752,#3068,.T.);\r
+-#9541=EDGE_CURVE('',#4752,#4751,#3078,.T.);\r
+-#9563=EDGE_CURVE('',#4763,#4759,#3082,.T.);\r
+-#9565=EDGE_CURVE('',#4759,#4760,#3091,.T.);\r
+-#9567=EDGE_CURVE('',#4764,#4760,#3086,.T.);\r
+-#9579=EDGE_CURVE('',#4760,#4759,#3096,.T.);\r
+-#9601=EDGE_CURVE('',#4732,#4728,#3104,.T.);\r
+-#9603=EDGE_CURVE('',#4727,#4728,#3109,.T.);\r
+-#9605=EDGE_CURVE('',#4731,#4727,#3100,.T.);\r
+-#9617=EDGE_CURVE('',#4728,#4727,#3114,.T.);\r
+-#9639=EDGE_CURVE('',#4724,#4720,#3122,.T.);\r
+-#9641=EDGE_CURVE('',#4719,#4720,#3127,.T.);\r
+-#9643=EDGE_CURVE('',#4723,#4719,#3118,.T.);\r
+-#9655=EDGE_CURVE('',#4720,#4719,#3132,.T.);\r
+-#9677=EDGE_CURVE('',#4716,#4712,#3140,.T.);\r
+-#9679=EDGE_CURVE('',#4711,#4712,#3145,.T.);\r
+-#9681=EDGE_CURVE('',#4715,#4711,#3136,.T.);\r
+-#9693=EDGE_CURVE('',#4712,#4711,#3150,.T.);\r
+-#9714=EDGE_CURVE('',#4947,#4948,#3154,.T.);\r
+-#9716=EDGE_CURVE('',#4948,#4960,#3238,.T.);\r
+-#9718=EDGE_CURVE('',#4959,#4960,#3217,.T.);\r
+-#9731=EDGE_CURVE('',#4951,#4952,#3163,.T.);\r
+-#9733=EDGE_CURVE('',#4952,#4948,#3168,.T.);\r
+-#9745=EDGE_CURVE('',#4971,#4972,#3172,.T.);\r
+-#9747=EDGE_CURVE('',#4972,#4952,#3226,.T.);\r
+-#9759=EDGE_CURVE('',#4975,#4976,#3181,.T.);\r
+-#9761=EDGE_CURVE('',#4976,#4972,#3186,.T.);\r
+-#9771=EDGE_CURVE('',#4963,#4964,#3190,.T.);\r
+-#9773=EDGE_CURVE('',#4964,#4976,#3230,.T.);\r
+-#9787=EDGE_CURVE('',#4967,#4968,#3199,.T.);\r
+-#9789=EDGE_CURVE('',#4968,#4964,#3204,.T.);\r
+-#9799=EDGE_CURVE('',#4955,#4956,#3208,.T.);\r
+-#9801=EDGE_CURVE('',#4956,#4968,#3234,.T.);\r
+-#9816=EDGE_CURVE('',#4960,#4956,#3222,.T.);\r
+-#9842=EDGE_CURVE('',#5035,#5036,#3242,.T.);\r
+-#9845=EDGE_CURVE('',#5046,#5048,#3321,.T.);\r
+-#9847=EDGE_CURVE('',#5035,#5046,#3264,.T.);\r
+-#9858=EDGE_CURVE('',#5035,#5038,#3247,.T.);\r
+-#9860=EDGE_CURVE('',#5038,#5040,#3251,.T.);\r
+-#9871=EDGE_CURVE('',#5027,#5030,#3281,.T.);\r
+-#9873=EDGE_CURVE('',#5027,#5038,#3260,.T.);\r
+-#9877=EDGE_CURVE('',#5043,#5046,#3317,.T.);\r
+-#9879=EDGE_CURVE('',#5043,#5054,#3268,.T.);\r
+-#9881=EDGE_CURVE('',#5051,#5054,#3299,.T.);\r
+-#9883=EDGE_CURVE('',#5051,#5030,#3272,.T.);\r
+-#9893=EDGE_CURVE('',#5027,#5028,#3276,.T.);\r
+-#9896=EDGE_CURVE('',#5030,#5032,#3285,.T.);\r
+-#9921=EDGE_CURVE('',#5051,#5052,#3294,.T.);\r
+-#9934=EDGE_CURVE('',#5054,#5056,#3303,.T.);\r
+-#9945=EDGE_CURVE('',#5043,#5044,#3312,.T.);\r
+-#9971=EDGE_CURVE('',#5121,#5107,#3330,.T.);\r
+-#9973=EDGE_CURVE('',#5107,#5108,#3346,.T.);\r
+-#9975=EDGE_CURVE('',#5122,#5108,#3342,.T.);\r
+-#9986=EDGE_CURVE('',#5126,#5112,#3334,.T.);\r
+-#9988=EDGE_CURVE('',#5112,#5107,#3351,.T.);\r
+-#10000=EDGE_CURVE('',#5124,#5110,#3338,.T.);\r
+-#10002=EDGE_CURVE('',#5110,#5112,#3355,.T.);\r
+-#10015=EDGE_CURVE('',#5108,#5110,#3360,.T.);\r
+-#10038=EDGE_CURVE('',#5140,#5136,#3397,.T.);\r
+-#10040=EDGE_CURVE('',#5118,#5140,#3365,.T.);\r
+-#10042=EDGE_CURVE('',#5116,#5118,#3370,.T.);\r
+-#10044=EDGE_CURVE('',#5115,#5116,#3375,.T.);\r
+-#10046=EDGE_CURVE('',#5136,#5115,#3379,.T.);\r
+-#10056=EDGE_CURVE('',#5135,#5136,#3383,.T.);\r
+-#10059=EDGE_CURVE('',#5139,#5140,#3392,.T.);\r
+-#10072=EDGE_CURVE('',#5129,#5115,#3401,.T.);\r
+-#10086=EDGE_CURVE('',#5130,#5116,#3405,.T.);\r
+-#10099=EDGE_CURVE('',#5132,#5118,#3409,.T.);\r
+-#10121=EDGE_CURVE('',#5183,#5184,#3413,.T.);\r
+-#10124=EDGE_CURVE('',#5188,#5186,#3422,.T.);\r
+-#10126=EDGE_CURVE('',#5188,#5183,#3427,.T.);\r
+-#10137=EDGE_CURVE('',#5183,#5143,#3444,.T.);\r
+-#10139=EDGE_CURVE('',#5147,#5143,#3486,.T.);\r
+-#10150=EDGE_CURVE('',#5191,#5172,#3431,.T.);\r
+-#10152=EDGE_CURVE('',#5196,#5191,#3478,.T.);\r
+-#10154=EDGE_CURVE('',#5144,#5196,#3435,.T.);\r
+-#10156=EDGE_CURVE('',#5143,#5144,#3440,.T.);\r
+-#10160=EDGE_CURVE('',#5160,#5188,#3448,.T.);\r
+-#10162=EDGE_CURVE('',#5164,#5160,#3558,.T.);\r
+-#10164=EDGE_CURVE('',#5152,#5164,#3452,.T.);\r
+-#10166=EDGE_CURVE('',#5156,#5152,#3540,.T.);\r
+-#10168=EDGE_CURVE('',#5176,#5156,#3456,.T.);\r
+-#10170=EDGE_CURVE('',#5180,#5176,#3522,.T.);\r
+-#10172=EDGE_CURVE('',#5168,#5180,#3460,.T.);\r
+-#10174=EDGE_CURVE('',#5172,#5168,#3504,.T.);\r
+-#10184=EDGE_CURVE('',#5191,#5192,#3464,.T.);\r
+-#10187=EDGE_CURVE('',#5171,#5172,#3499,.T.);\r
+-#10200=EDGE_CURVE('',#5196,#5194,#3473,.T.);\r
+-#10213=EDGE_CURVE('',#5148,#5144,#3482,.T.);\r
+-#10236=EDGE_CURVE('',#5167,#5168,#3490,.T.);\r
+-#10251=EDGE_CURVE('',#5179,#5180,#3517,.T.);\r
+-#10262=EDGE_CURVE('',#5175,#5176,#3508,.T.);\r
+-#10275=EDGE_CURVE('',#5155,#5156,#3535,.T.);\r
+-#10288=EDGE_CURVE('',#5151,#5152,#3526,.T.);\r
+-#10303=EDGE_CURVE('',#5163,#5164,#3553,.T.);\r
+-#10314=EDGE_CURVE('',#5159,#5160,#3544,.T.);\r
+-#10340=EDGE_CURVE('',#5207,#5199,#3562,.T.);\r
+-#10342=EDGE_CURVE('',#5199,#5200,#3578,.T.);\r
+-#10344=EDGE_CURVE('',#5208,#5200,#3574,.T.);\r
+-#10355=EDGE_CURVE('',#5212,#5204,#3566,.T.);\r
+-#10357=EDGE_CURVE('',#5204,#5199,#3583,.T.);\r
+-#10369=EDGE_CURVE('',#5210,#5202,#3570,.T.);\r
+-#10371=EDGE_CURVE('',#5202,#5204,#3587,.T.);\r
+-#10384=EDGE_CURVE('',#5200,#5202,#3592,.T.);\r
+-#10408=EDGE_CURVE('',#5223,#5215,#3596,.T.);\r
+-#10410=EDGE_CURVE('',#5215,#5216,#3612,.T.);\r
+-#10412=EDGE_CURVE('',#5224,#5216,#3608,.T.);\r
+-#10423=EDGE_CURVE('',#5228,#5220,#3600,.T.);\r
+-#10425=EDGE_CURVE('',#5220,#5215,#3617,.T.);\r
+-#10437=EDGE_CURVE('',#5226,#5218,#3604,.T.);\r
+-#10439=EDGE_CURVE('',#5218,#5220,#3621,.T.);\r
+-#10452=EDGE_CURVE('',#5216,#5218,#3626,.T.);\r
+-#10476=EDGE_CURVE('',#5239,#5231,#3630,.T.);\r
+-#10478=EDGE_CURVE('',#5231,#5232,#3646,.T.);\r
+-#10480=EDGE_CURVE('',#5240,#5232,#3642,.T.);\r
+-#10491=EDGE_CURVE('',#5244,#5236,#3634,.T.);\r
+-#10493=EDGE_CURVE('',#5236,#5231,#3651,.T.);\r
+-#10505=EDGE_CURVE('',#5242,#5234,#3638,.T.);\r
+-#10507=EDGE_CURVE('',#5234,#5236,#3655,.T.);\r
+-#10520=EDGE_CURVE('',#5232,#5234,#3660,.T.);\r
+-#10544=EDGE_CURVE('',#5255,#5247,#3664,.T.);\r
+-#10546=EDGE_CURVE('',#5247,#5248,#3680,.T.);\r
+-#10548=EDGE_CURVE('',#5256,#5248,#3676,.T.);\r
+-#10559=EDGE_CURVE('',#5260,#5252,#3668,.T.);\r
+-#10561=EDGE_CURVE('',#5252,#5247,#3685,.T.);\r
+-#10573=EDGE_CURVE('',#5258,#5250,#3672,.T.);\r
+-#10575=EDGE_CURVE('',#5250,#5252,#3689,.T.);\r
+-#10588=EDGE_CURVE('',#5248,#5250,#3694,.T.);\r
+-#10612=EDGE_CURVE('',#5278,#5264,#3702,.T.);\r
+-#10614=EDGE_CURVE('',#5263,#5264,#3714,.T.);\r
+-#10616=EDGE_CURVE('',#5277,#5263,#3698,.T.);\r
+-#10627=EDGE_CURVE('',#5280,#5266,#3706,.T.);\r
+-#10629=EDGE_CURVE('',#5264,#5266,#3719,.T.);\r
+-#10641=EDGE_CURVE('',#5282,#5268,#3710,.T.);\r
+-#10643=EDGE_CURVE('',#5266,#5268,#3723,.T.);\r
+-#10656=EDGE_CURVE('',#5268,#5263,#3728,.T.);\r
+-#10679=EDGE_CURVE('',#5480,#5476,#3765,.T.);\r
+-#10681=EDGE_CURVE('',#5480,#5271,#3732,.T.);\r
+-#10683=EDGE_CURVE('',#5271,#5272,#3737,.T.);\r
+-#10685=EDGE_CURVE('',#5272,#5274,#3742,.T.);\r
+-#10687=EDGE_CURVE('',#5274,#5476,#3747,.T.);\r
+-#10697=EDGE_CURVE('',#5475,#5476,#3751,.T.);\r
+-#10700=EDGE_CURVE('',#5479,#5480,#3760,.T.);\r
+-#10713=EDGE_CURVE('',#5288,#5274,#3769,.T.);\r
+-#10727=EDGE_CURVE('',#5286,#5272,#3773,.T.);\r
+-#10740=EDGE_CURVE('',#5285,#5271,#3777,.T.);\r
+-#10763=EDGE_CURVE('',#5306,#5292,#3785,.T.);\r
+-#10765=EDGE_CURVE('',#5291,#5292,#3797,.T.);\r
+-#10767=EDGE_CURVE('',#5305,#5291,#3781,.T.);\r
+-#10778=EDGE_CURVE('',#5308,#5294,#3789,.T.);\r
+-#10780=EDGE_CURVE('',#5292,#5294,#3802,.T.);\r
+-#10792=EDGE_CURVE('',#5310,#5296,#3793,.T.);\r
+-#10794=EDGE_CURVE('',#5294,#5296,#3806,.T.);\r
+-#10807=EDGE_CURVE('',#5296,#5291,#3811,.T.);\r
+-#10830=EDGE_CURVE('',#5472,#5468,#3848,.T.);\r
+-#10832=EDGE_CURVE('',#5472,#5299,#3815,.T.);\r
+-#10834=EDGE_CURVE('',#5299,#5300,#3820,.T.);\r
+-#10836=EDGE_CURVE('',#5300,#5302,#3825,.T.);\r
+-#10838=EDGE_CURVE('',#5302,#5468,#3830,.T.);\r
+-#10848=EDGE_CURVE('',#5467,#5468,#3834,.T.);\r
+-#10851=EDGE_CURVE('',#5471,#5472,#3843,.T.);\r
+-#10864=EDGE_CURVE('',#5316,#5302,#3852,.T.);\r
+-#10878=EDGE_CURVE('',#5314,#5300,#3856,.T.);\r
+-#10891=EDGE_CURVE('',#5313,#5299,#3860,.T.);\r
+-#10914=EDGE_CURVE('',#5336,#5328,#3868,.T.);\r
+-#10916=EDGE_CURVE('',#5327,#5328,#3880,.T.);\r
+-#10918=EDGE_CURVE('',#5335,#5327,#3864,.T.);\r
+-#10929=EDGE_CURVE('',#5338,#5330,#3872,.T.);\r
+-#10931=EDGE_CURVE('',#5328,#5330,#3885,.T.);\r
+-#10943=EDGE_CURVE('',#5340,#5332,#3876,.T.);\r
+-#10945=EDGE_CURVE('',#5330,#5332,#3889,.T.);\r
+-#10958=EDGE_CURVE('',#5332,#5327,#3894,.T.);\r
+-#10982=EDGE_CURVE('',#5352,#5344,#3902,.T.);\r
+-#10984=EDGE_CURVE('',#5343,#5344,#3914,.T.);\r
+-#10986=EDGE_CURVE('',#5351,#5343,#3898,.T.);\r
+-#10997=EDGE_CURVE('',#5354,#5346,#3906,.T.);\r
+-#10999=EDGE_CURVE('',#5344,#5346,#3919,.T.);\r
+-#11011=EDGE_CURVE('',#5356,#5348,#3910,.T.);\r
+-#11013=EDGE_CURVE('',#5346,#5348,#3923,.T.);\r
+-#11026=EDGE_CURVE('',#5348,#5343,#3928,.T.);\r
+-#11050=EDGE_CURVE('',#5368,#5360,#3936,.T.);\r
+-#11052=EDGE_CURVE('',#5359,#5360,#3948,.T.);\r
+-#11054=EDGE_CURVE('',#5367,#5359,#3932,.T.);\r
+-#11065=EDGE_CURVE('',#5370,#5362,#3940,.T.);\r
+-#11067=EDGE_CURVE('',#5360,#5362,#3953,.T.);\r
+-#11079=EDGE_CURVE('',#5372,#5364,#3944,.T.);\r
+-#11081=EDGE_CURVE('',#5362,#5364,#3957,.T.);\r
+-#11094=EDGE_CURVE('',#5364,#5359,#3962,.T.);\r
+-#11118=EDGE_CURVE('',#5384,#5376,#3970,.T.);\r
+-#11120=EDGE_CURVE('',#5375,#5376,#3982,.T.);\r
+-#11122=EDGE_CURVE('',#5383,#5375,#3966,.T.);\r
+-#11133=EDGE_CURVE('',#5386,#5378,#3974,.T.);\r
+-#11135=EDGE_CURVE('',#5376,#5378,#3987,.T.);\r
+-#11147=EDGE_CURVE('',#5388,#5380,#3978,.T.);\r
+-#11149=EDGE_CURVE('',#5378,#5380,#3991,.T.);\r
+-#11162=EDGE_CURVE('',#5380,#5375,#3996,.T.);\r
+-#11186=EDGE_CURVE('',#5405,#5391,#4000,.T.);\r
+-#11188=EDGE_CURVE('',#5391,#5392,#4016,.T.);\r
+-#11190=EDGE_CURVE('',#5406,#5392,#4012,.T.);\r
+-#11201=EDGE_CURVE('',#5410,#5396,#4004,.T.);\r
+-#11203=EDGE_CURVE('',#5396,#5391,#4021,.T.);\r
+-#11215=EDGE_CURVE('',#5408,#5394,#4008,.T.);\r
+-#11217=EDGE_CURVE('',#5394,#5396,#4025,.T.);\r
+-#11230=EDGE_CURVE('',#5392,#5394,#4030,.T.);\r
+-#11253=EDGE_CURVE('',#5488,#5484,#4067,.T.);\r
+-#11255=EDGE_CURVE('',#5402,#5488,#4035,.T.);\r
+-#11257=EDGE_CURVE('',#5400,#5402,#4040,.T.);\r
+-#11259=EDGE_CURVE('',#5399,#5400,#4045,.T.);\r
+-#11261=EDGE_CURVE('',#5484,#5399,#4049,.T.);\r
+-#11271=EDGE_CURVE('',#5483,#5484,#4053,.T.);\r
+-#11274=EDGE_CURVE('',#5487,#5488,#4062,.T.);\r
+-#11287=EDGE_CURVE('',#5413,#5399,#4071,.T.);\r
+-#11301=EDGE_CURVE('',#5414,#5400,#4075,.T.);\r
+-#11314=EDGE_CURVE('',#5416,#5402,#4079,.T.);\r
+-#11336=EDGE_CURVE('',#5451,#5452,#4083,.T.);\r
+-#11338=EDGE_CURVE('',#5452,#5456,#4088,.T.);\r
+-#11340=EDGE_CURVE('',#5455,#5456,#4092,.T.);\r
+-#11353=EDGE_CURVE('',#5422,#5424,#4110,.T.);\r
+-#11355=EDGE_CURVE('',#5452,#5422,#4216,.T.);\r
+-#11365=EDGE_CURVE('',#5419,#5420,#4101,.T.);\r
+-#11367=EDGE_CURVE('',#5419,#5422,#4106,.T.);\r
+-#11381=EDGE_CURVE('',#5430,#5432,#4128,.T.);\r
+-#11383=EDGE_CURVE('',#5419,#5430,#4220,.T.);\r
+-#11393=EDGE_CURVE('',#5427,#5428,#4119,.T.);\r
+-#11395=EDGE_CURVE('',#5427,#5430,#4124,.T.);\r
+-#11409=EDGE_CURVE('',#5446,#5448,#4146,.T.);\r
+-#11411=EDGE_CURVE('',#5427,#5446,#4224,.T.);\r
+-#11421=EDGE_CURVE('',#5443,#5444,#4137,.T.);\r
+-#11423=EDGE_CURVE('',#5443,#5446,#4142,.T.);\r
+-#11435=EDGE_CURVE('',#5438,#5440,#4164,.T.);\r
+-#11437=EDGE_CURVE('',#5443,#5438,#4228,.T.);\r
+-#11449=EDGE_CURVE('',#5435,#5436,#4155,.T.);\r
+-#11451=EDGE_CURVE('',#5435,#5438,#4160,.T.);\r
+-#11463=EDGE_CURVE('',#5463,#5464,#4182,.T.);\r
+-#11465=EDGE_CURVE('',#5435,#5464,#4199,.T.);\r
+-#11477=EDGE_CURVE('',#5459,#5460,#4173,.T.);\r
+-#11479=EDGE_CURVE('',#5460,#5464,#4178,.T.);\r
+-#11493=EDGE_CURVE('',#5323,#5319,#4191,.T.);\r
+-#11495=EDGE_CURVE('',#5460,#5319,#4203,.T.);\r
+-#11506=EDGE_CURVE('',#5324,#5320,#4195,.T.);\r
+-#11508=EDGE_CURVE('',#5319,#5320,#4208,.T.);\r
+-#11520=EDGE_CURVE('',#5320,#5456,#4212,.T.);\r
+-#11562=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11550),#11561);\r
+-#11569=PRODUCT_DEFINITION('design','',#11568,#11565);\r
+-#11570=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PROESOURCE.',#11569);\r
+-#11571=SHAPE_DEFINITION_REPRESENTATION(#11570,#11562);\r
+-ENDSEC;\r
+-END-ISO-10303-21;\r
++ISO-10303-21;
++HEADER;
++FILE_DESCRIPTION((''),'2;1');
++FILE_NAME('PROESOURCE','2002-11-04T',('user-01'),(''),
++'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2002060',
++'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2002060','');
++FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
++ENDSEC;
++DATA;
++#1=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2=VECTOR('',#1,1.693725393319E1);
++#3=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));
++#4=LINE('',#3,#2);
++#5=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6=VECTOR('',#5,9.E0);
++#7=CARTESIAN_POINT('',(1.65E1,0.E0,2.5E0));
++#8=LINE('',#7,#6);
++#9=CARTESIAN_POINT('',(1.8E1,0.E0,3.075E1));
++#10=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11=DIRECTION('',(1.E0,0.E0,0.E0));
++#12=AXIS2_PLACEMENT_3D('',#9,#10,#11);
++#14=CARTESIAN_POINT('',(1.8E1,0.E0,3.075E1));
++#15=DIRECTION('',(0.E0,-1.E0,0.E0));
++#16=DIRECTION('',(-1.E0,0.E0,0.E0));
++#17=AXIS2_PLACEMENT_3D('',#14,#15,#16);
++#19=CARTESIAN_POINT('',(1.8E1,0.E0,1.25E0));
++#20=DIRECTION('',(0.E0,-1.E0,0.E0));
++#21=DIRECTION('',(1.E0,0.E0,0.E0));
++#22=AXIS2_PLACEMENT_3D('',#19,#20,#21);
++#24=CARTESIAN_POINT('',(1.8E1,0.E0,1.25E0));
++#25=DIRECTION('',(0.E0,-1.E0,0.E0));
++#26=DIRECTION('',(-1.E0,0.E0,0.E0));
++#27=AXIS2_PLACEMENT_3D('',#24,#25,#26);
++#29=CARTESIAN_POINT('',(1.2E1,0.E0,3.075E1));
++#30=DIRECTION('',(0.E0,-1.E0,0.E0));
++#31=DIRECTION('',(1.E0,0.E0,0.E0));
++#32=AXIS2_PLACEMENT_3D('',#29,#30,#31);
++#34=CARTESIAN_POINT('',(1.2E1,0.E0,3.075E1));
++#35=DIRECTION('',(0.E0,-1.E0,0.E0));
++#36=DIRECTION('',(-1.E0,0.E0,0.E0));
++#37=AXIS2_PLACEMENT_3D('',#34,#35,#36);
++#39=CARTESIAN_POINT('',(6.E0,0.E0,3.075E1));
++#40=DIRECTION('',(0.E0,-1.E0,0.E0));
++#41=DIRECTION('',(1.E0,0.E0,0.E0));
++#42=AXIS2_PLACEMENT_3D('',#39,#40,#41);
++#44=CARTESIAN_POINT('',(6.E0,0.E0,3.075E1));
++#45=DIRECTION('',(0.E0,-1.E0,0.E0));
++#46=DIRECTION('',(-1.E0,0.E0,0.E0));
++#47=AXIS2_PLACEMENT_3D('',#44,#45,#46);
++#49=CARTESIAN_POINT('',(1.2E1,0.E0,1.25E0));
++#50=DIRECTION('',(0.E0,-1.E0,0.E0));
++#51=DIRECTION('',(1.E0,0.E0,0.E0));
++#52=AXIS2_PLACEMENT_3D('',#49,#50,#51);
++#54=CARTESIAN_POINT('',(1.2E1,0.E0,1.25E0));
++#55=DIRECTION('',(0.E0,-1.E0,0.E0));
++#56=DIRECTION('',(-1.E0,0.E0,0.E0));
++#57=AXIS2_PLACEMENT_3D('',#54,#55,#56);
++#59=CARTESIAN_POINT('',(2.2875E1,0.E0,2.4E1));
++#60=DIRECTION('',(0.E0,-1.E0,0.E0));
++#61=DIRECTION('',(1.E0,0.E0,0.E0));
++#62=AXIS2_PLACEMENT_3D('',#59,#60,#61);
++#64=CARTESIAN_POINT('',(2.2875E1,0.E0,2.4E1));
++#65=DIRECTION('',(0.E0,-1.E0,0.E0));
++#66=DIRECTION('',(-1.E0,0.E0,0.E0));
++#67=AXIS2_PLACEMENT_3D('',#64,#65,#66);
++#69=CARTESIAN_POINT('',(2.2875E1,0.E0,1.8E1));
++#70=DIRECTION('',(0.E0,-1.E0,0.E0));
++#71=DIRECTION('',(1.E0,0.E0,0.E0));
++#72=AXIS2_PLACEMENT_3D('',#69,#70,#71);
++#74=CARTESIAN_POINT('',(2.2875E1,0.E0,1.8E1));
++#75=DIRECTION('',(0.E0,-1.E0,0.E0));
++#76=DIRECTION('',(-1.E0,0.E0,0.E0));
++#77=AXIS2_PLACEMENT_3D('',#74,#75,#76);
++#79=CARTESIAN_POINT('',(2.2875E1,0.E0,1.2E1));
++#80=DIRECTION('',(0.E0,-1.E0,0.E0));
++#81=DIRECTION('',(1.E0,0.E0,0.E0));
++#82=AXIS2_PLACEMENT_3D('',#79,#80,#81);
++#84=CARTESIAN_POINT('',(2.2875E1,0.E0,1.2E1));
++#85=DIRECTION('',(0.E0,-1.E0,0.E0));
++#86=DIRECTION('',(-1.E0,0.E0,0.E0));
++#87=AXIS2_PLACEMENT_3D('',#84,#85,#86);
++#89=CARTESIAN_POINT('',(2.2875E1,0.E0,6.E0));
++#90=DIRECTION('',(0.E0,-1.E0,0.E0));
++#91=DIRECTION('',(1.E0,0.E0,0.E0));
++#92=AXIS2_PLACEMENT_3D('',#89,#90,#91);
++#94=CARTESIAN_POINT('',(2.2875E1,0.E0,6.E0));
++#95=DIRECTION('',(0.E0,-1.E0,0.E0));
++#96=DIRECTION('',(-1.E0,0.E0,0.E0));
++#97=AXIS2_PLACEMENT_3D('',#94,#95,#96);
++#99=CARTESIAN_POINT('',(1.125E0,0.E0,2.4E1));
++#100=DIRECTION('',(0.E0,-1.E0,0.E0));
++#101=DIRECTION('',(1.E0,0.E0,0.E0));
++#102=AXIS2_PLACEMENT_3D('',#99,#100,#101);
++#104=CARTESIAN_POINT('',(1.125E0,0.E0,2.4E1));
++#105=DIRECTION('',(0.E0,-1.E0,0.E0));
++#106=DIRECTION('',(-1.E0,0.E0,0.E0));
++#107=AXIS2_PLACEMENT_3D('',#104,#105,#106);
++#109=CARTESIAN_POINT('',(1.125E0,0.E0,1.8E1));
++#110=DIRECTION('',(0.E0,-1.E0,0.E0));
++#111=DIRECTION('',(1.E0,0.E0,0.E0));
++#112=AXIS2_PLACEMENT_3D('',#109,#110,#111);
++#114=CARTESIAN_POINT('',(1.125E0,0.E0,1.8E1));
++#115=DIRECTION('',(0.E0,-1.E0,0.E0));
++#116=DIRECTION('',(-1.E0,0.E0,0.E0));
++#117=AXIS2_PLACEMENT_3D('',#114,#115,#116);
++#119=CARTESIAN_POINT('',(1.125E0,0.E0,1.2E1));
++#120=DIRECTION('',(0.E0,-1.E0,0.E0));
++#121=DIRECTION('',(1.E0,0.E0,0.E0));
++#122=AXIS2_PLACEMENT_3D('',#119,#120,#121);
++#124=CARTESIAN_POINT('',(1.125E0,0.E0,1.2E1));
++#125=DIRECTION('',(0.E0,-1.E0,0.E0));
++#126=DIRECTION('',(-1.E0,0.E0,0.E0));
++#127=AXIS2_PLACEMENT_3D('',#124,#125,#126);
++#129=DIRECTION('',(1.E0,0.E0,0.E0));
++#130=VECTOR('',#129,1.E0);
++#131=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));
++#132=LINE('',#131,#130);
++#133=DIRECTION('',(0.E0,0.E0,-1.E0));
++#134=VECTOR('',#133,3.E0);
++#135=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));
++#136=LINE('',#135,#134);
++#137=DIRECTION('',(-1.E0,0.E0,0.E0));
++#138=VECTOR('',#137,1.6E1);
++#139=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));
++#140=LINE('',#139,#138);
++#141=DIRECTION('',(0.E0,0.E0,1.E0));
++#142=VECTOR('',#141,3.E0);
++#143=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
++#144=LINE('',#143,#142);
++#145=DIRECTION('',(-1.E0,0.E0,0.E0));
++#146=VECTOR('',#145,1.E0);
++#147=CARTESIAN_POINT('',(-1.E0,0.E0,8.E0));
++#148=LINE('',#147,#146);
++#149=DIRECTION('',(0.E0,0.E0,1.E0));
++#150=VECTOR('',#149,3.75E0);
++#151=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));
++#152=LINE('',#151,#150);
++#153=DIRECTION('',(1.E0,0.E0,0.E0));
++#154=VECTOR('',#153,5.E-1);
++#155=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));
++#156=LINE('',#155,#154);
++#157=DIRECTION('',(0.E0,0.E0,1.E0));
++#158=VECTOR('',#157,1.475E1);
++#159=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));
++#160=LINE('',#159,#158);
++#161=DIRECTION('',(1.E0,0.E0,0.E0));
++#162=VECTOR('',#161,1.6E1);
++#163=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));
++#164=LINE('',#163,#162);
++#165=DIRECTION('',(0.E0,0.E0,-1.E0));
++#166=VECTOR('',#165,1.475E1);
++#167=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));
++#168=LINE('',#167,#166);
++#169=DIRECTION('',(-1.E0,0.E0,0.E0));
++#170=VECTOR('',#169,5.E-1);
++#171=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));
++#172=LINE('',#171,#170);
++#173=DIRECTION('',(0.E0,0.E0,1.E0));
++#174=VECTOR('',#173,3.75E0);
++#175=CARTESIAN_POINT('',(2.6E1,0.E0,8.E0));
++#176=LINE('',#175,#174);
++#177=CARTESIAN_POINT('',(1.125E0,0.E0,6.E0));
++#178=DIRECTION('',(0.E0,-1.E0,0.E0));
++#179=DIRECTION('',(1.E0,0.E0,0.E0));
++#180=AXIS2_PLACEMENT_3D('',#177,#178,#179);
++#182=CARTESIAN_POINT('',(1.125E0,0.E0,6.E0));
++#183=DIRECTION('',(0.E0,-1.E0,0.E0));
++#184=DIRECTION('',(-1.E0,0.E0,0.E0));
++#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
++#187=CARTESIAN_POINT('',(6.E0,0.E0,1.25E0));
++#188=DIRECTION('',(0.E0,-1.E0,0.E0));
++#189=DIRECTION('',(1.E0,0.E0,0.E0));
++#190=AXIS2_PLACEMENT_3D('',#187,#188,#189);
++#192=CARTESIAN_POINT('',(6.E0,0.E0,1.25E0));
++#193=DIRECTION('',(0.E0,-1.E0,0.E0));
++#194=DIRECTION('',(-1.E0,0.E0,0.E0));
++#195=AXIS2_PLACEMENT_3D('',#192,#193,#194);
++#197=DIRECTION('',(1.E0,0.E0,0.E0));
++#198=VECTOR('',#197,1.3E1);
++#199=CARTESIAN_POINT('',(5.5E0,0.E0,1.89375E1));
++#200=LINE('',#199,#198);
++#201=DIRECTION('',(0.E0,0.E0,-1.E0));
++#202=VECTOR('',#201,2.5625E0);
++#203=CARTESIAN_POINT('',(2.15E1,0.E0,2.45E1));
++#204=LINE('',#203,#202);
++#205=DIRECTION('',(1.E0,0.E0,0.E0));
++#206=VECTOR('',#205,9.E0);
++#207=CARTESIAN_POINT('',(7.5E0,0.E0,2.95E1));
++#208=LINE('',#207,#206);
++#209=DIRECTION('',(0.E0,0.E0,1.E0));
++#210=VECTOR('',#209,2.5625E0);
++#211=CARTESIAN_POINT('',(2.5E0,0.E0,2.19375E1));
++#212=LINE('',#211,#210);
++#213=DIRECTION('',(0.E0,0.E0,-1.E0));
++#214=VECTOR('',#213,8.125E-1);
++#215=CARTESIAN_POINT('',(2.15E1,0.E0,1.40625E1));
++#216=LINE('',#215,#214);
++#217=DIRECTION('',(-1.E0,0.E0,0.E0));
++#218=VECTOR('',#217,1.3E1);
++#219=CARTESIAN_POINT('',(1.85E1,0.E0,1.70625E1));
++#220=LINE('',#219,#218);
++#221=DIRECTION('',(0.E0,0.E0,1.E0));
++#222=VECTOR('',#221,8.125E-1);
++#223=CARTESIAN_POINT('',(2.5E0,0.E0,1.325E1));
++#224=LINE('',#223,#222);
++#225=DIRECTION('',(1.E0,0.E0,0.E0));
++#226=VECTOR('',#225,1.E0);
++#227=CARTESIAN_POINT('',(3.5E0,0.E0,1.225E1));
++#228=LINE('',#227,#226);
++#229=DIRECTION('',(0.E0,0.E0,-1.E0));
++#230=VECTOR('',#229,7.5E-1);
++#231=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));
++#232=LINE('',#231,#230);
++#233=DIRECTION('',(1.E0,0.E0,0.E0));
++#234=VECTOR('',#233,1.2E1);
++#235=CARTESIAN_POINT('',(6.E0,0.E0,1.E1));
++#236=LINE('',#235,#234);
++#237=DIRECTION('',(0.E0,0.E0,-1.E0));
++#238=VECTOR('',#237,7.5E-1);
++#239=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));
++#240=LINE('',#239,#238);
++#241=DIRECTION('',(-1.E0,0.E0,0.E0));
++#242=VECTOR('',#241,1.E0);
++#243=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));
++#244=LINE('',#243,#242);
++#245=CARTESIAN_POINT('',(6.E0,0.E0,9.E0));
++#246=DIRECTION('',(0.E0,-1.E0,0.E0));
++#247=DIRECTION('',(1.E0,0.E0,0.E0));
++#248=AXIS2_PLACEMENT_3D('',#245,#246,#247);
++#250=CARTESIAN_POINT('',(6.E0,0.E0,9.E0));
++#251=DIRECTION('',(0.E0,-1.E0,0.E0));
++#252=DIRECTION('',(-1.E0,0.E0,0.E0));
++#253=AXIS2_PLACEMENT_3D('',#250,#251,#252);
++#255=CARTESIAN_POINT('',(1.2E1,0.E0,9.E0));
++#256=DIRECTION('',(0.E0,-1.E0,0.E0));
++#257=DIRECTION('',(1.E0,0.E0,0.E0));
++#258=AXIS2_PLACEMENT_3D('',#255,#256,#257);
++#260=CARTESIAN_POINT('',(1.2E1,0.E0,9.E0));
++#261=DIRECTION('',(0.E0,-1.E0,0.E0));
++#262=DIRECTION('',(-1.E0,0.E0,0.E0));
++#263=AXIS2_PLACEMENT_3D('',#260,#261,#262);
++#265=CARTESIAN_POINT('',(1.8E1,0.E0,9.E0));
++#266=DIRECTION('',(0.E0,-1.E0,0.E0));
++#267=DIRECTION('',(1.E0,0.E0,0.E0));
++#268=AXIS2_PLACEMENT_3D('',#265,#266,#267);
++#270=CARTESIAN_POINT('',(1.8E1,0.E0,9.E0));
++#271=DIRECTION('',(0.E0,-1.E0,0.E0));
++#272=DIRECTION('',(-1.E0,0.E0,0.E0));
++#273=AXIS2_PLACEMENT_3D('',#270,#271,#272);
++#275=CARTESIAN_POINT('',(6.E0,0.E0,1.8E1));
++#276=DIRECTION('',(0.E0,-1.E0,0.E0));
++#277=DIRECTION('',(1.E0,0.E0,0.E0));
++#278=AXIS2_PLACEMENT_3D('',#275,#276,#277);
++#280=CARTESIAN_POINT('',(6.E0,0.E0,1.8E1));
++#281=DIRECTION('',(0.E0,-1.E0,0.E0));
++#282=DIRECTION('',(-1.E0,0.E0,0.E0));
++#283=AXIS2_PLACEMENT_3D('',#280,#281,#282);
++#285=CARTESIAN_POINT('',(1.2E1,0.E0,1.8E1));
++#286=DIRECTION('',(0.E0,-1.E0,0.E0));
++#287=DIRECTION('',(1.E0,0.E0,0.E0));
++#288=AXIS2_PLACEMENT_3D('',#285,#286,#287);
++#290=CARTESIAN_POINT('',(1.2E1,0.E0,1.8E1));
++#291=DIRECTION('',(0.E0,-1.E0,0.E0));
++#292=DIRECTION('',(-1.E0,0.E0,0.E0));
++#293=AXIS2_PLACEMENT_3D('',#290,#291,#292);
++#295=CARTESIAN_POINT('',(1.8E1,0.E0,1.8E1));
++#296=DIRECTION('',(0.E0,-1.E0,0.E0));
++#297=DIRECTION('',(1.E0,0.E0,0.E0));
++#298=AXIS2_PLACEMENT_3D('',#295,#296,#297);
++#300=CARTESIAN_POINT('',(1.8E1,0.E0,1.8E1));
++#301=DIRECTION('',(0.E0,-1.E0,0.E0));
++#302=DIRECTION('',(-1.E0,0.E0,0.E0));
++#303=AXIS2_PLACEMENT_3D('',#300,#301,#302);
++#305=DIRECTION('',(1.E0,0.E0,0.E0));
++#306=VECTOR('',#305,3.E0);
++#307=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));
++#308=LINE('',#307,#306);
++#309=CARTESIAN_POINT('',(1.05E1,0.E0,1.25E0));
++#310=DIRECTION('',(0.E0,-1.E0,0.E0));
++#311=DIRECTION('',(0.E0,0.E0,-1.E0));
++#312=AXIS2_PLACEMENT_3D('',#309,#310,#311);
++#314=DIRECTION('',(-1.E0,0.E0,0.E0));
++#315=VECTOR('',#314,3.E0);
++#316=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));
++#317=LINE('',#316,#315);
++#318=CARTESIAN_POINT('',(7.5E0,0.E0,1.25E0));
++#319=DIRECTION('',(0.E0,-1.E0,0.E0));
++#320=DIRECTION('',(0.E0,0.E0,1.E0));
++#321=AXIS2_PLACEMENT_3D('',#318,#319,#320);
++#323=CARTESIAN_POINT('',(1.61E0,0.E0,4.5E0));
++#324=DIRECTION('',(0.E0,-1.E0,0.E0));
++#325=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));
++#326=AXIS2_PLACEMENT_3D('',#323,#324,#325);
++#328=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#329=VECTOR('',#328,4.263248410977E0);
++#330=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));
++#331=LINE('',#330,#329);
++#332=CARTESIAN_POINT('',(4.553039342392E0,0.E0,1.645354088550E0));
++#333=DIRECTION('',(0.E0,-1.E0,0.E0));
++#334=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#335=AXIS2_PLACEMENT_3D('',#332,#333,#334);
++#337=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));
++#338=DIRECTION('',(0.E0,-1.E0,0.E0));
++#339=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));
++#340=AXIS2_PLACEMENT_3D('',#337,#338,#339);
++#342=DIRECTION('',(0.E0,0.E0,-1.E0));
++#343=VECTOR('',#342,3.15E-1);
++#344=CARTESIAN_POINT('',(6.9E-1,0.E0,7.815E0));
++#345=LINE('',#344,#343);
++#346=CARTESIAN_POINT('',(1.25125E0,0.E0,7.5E0));
++#347=DIRECTION('',(0.E0,-1.E0,0.E0));
++#348=DIRECTION('',(-1.E0,0.E0,0.E0));
++#349=AXIS2_PLACEMENT_3D('',#346,#347,#348);
++#351=DIRECTION('',(0.E0,0.E0,1.E0));
++#352=VECTOR('',#351,3.15E-1);
++#353=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));
++#354=LINE('',#353,#352);
++#355=DIRECTION('',(1.E0,0.E0,0.E0));
++#356=VECTOR('',#355,7.5E-1);
++#357=CARTESIAN_POINT('',(2.6875E0,0.E0,8.69E0));
++#358=LINE('',#357,#356);
++#359=DIRECTION('',(0.E0,0.E0,1.E0));
++#360=VECTOR('',#359,8.1E-1);
++#361=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));
++#362=LINE('',#361,#360);
++#363=DIRECTION('',(-1.E0,0.E0,0.E0));
++#364=VECTOR('',#363,3.875E0);
++#365=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));
++#366=LINE('',#365,#364);
++#367=DIRECTION('',(0.E0,0.E0,-1.E0));
++#368=VECTOR('',#367,8.1E-1);
++#369=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));
++#370=LINE('',#369,#368);
++#371=DIRECTION('',(1.E0,0.E0,0.E0));
++#372=VECTOR('',#371,2.525E-1);
++#373=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));
++#374=LINE('',#373,#372);
++#375=DIRECTION('',(0.E0,0.E0,-1.E0));
++#376=VECTOR('',#375,3.E0);
++#377=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));
++#378=LINE('',#377,#376);
++#379=CARTESIAN_POINT('',(1.25E0,0.E0,1.35E1));
++#380=DIRECTION('',(0.E0,-1.E0,0.E0));
++#381=DIRECTION('',(-1.E0,0.E0,0.E0));
++#382=AXIS2_PLACEMENT_3D('',#379,#380,#381);
++#384=DIRECTION('',(0.E0,0.E0,1.E0));
++#385=VECTOR('',#384,3.E0);
++#386=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));
++#387=LINE('',#386,#385);
++#388=CARTESIAN_POINT('',(1.25E0,0.E0,1.65E1));
++#389=DIRECTION('',(0.E0,-1.E0,0.E0));
++#390=DIRECTION('',(1.E0,0.E0,0.E0));
++#391=AXIS2_PLACEMENT_3D('',#388,#389,#390);
++#393=DIRECTION('',(0.E0,0.E0,-1.E0));
++#394=VECTOR('',#393,3.E0);
++#395=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));
++#396=LINE('',#395,#394);
++#397=CARTESIAN_POINT('',(1.25E0,0.E0,1.95E1));
++#398=DIRECTION('',(0.E0,-1.E0,0.E0));
++#399=DIRECTION('',(-1.E0,0.E0,0.E0));
++#400=AXIS2_PLACEMENT_3D('',#397,#398,#399);
++#402=DIRECTION('',(0.E0,0.E0,1.E0));
++#403=VECTOR('',#402,3.E0);
++#404=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));
++#405=LINE('',#404,#403);
++#406=CARTESIAN_POINT('',(1.25E0,0.E0,2.25E1));
++#407=DIRECTION('',(0.E0,-1.E0,0.E0));
++#408=DIRECTION('',(1.E0,0.E0,0.E0));
++#409=AXIS2_PLACEMENT_3D('',#406,#407,#408);
++#411=DIRECTION('',(1.E0,0.E0,0.E0));
++#412=VECTOR('',#411,3.E0);
++#413=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));
++#414=LINE('',#413,#412);
++#415=CARTESIAN_POINT('',(1.05E1,0.E0,9.E0));
++#416=DIRECTION('',(0.E0,-1.E0,0.E0));
++#417=DIRECTION('',(0.E0,0.E0,-1.E0));
++#418=AXIS2_PLACEMENT_3D('',#415,#416,#417);
++#420=DIRECTION('',(-1.E0,0.E0,0.E0));
++#421=VECTOR('',#420,3.E0);
++#422=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));
++#423=LINE('',#422,#421);
++#424=CARTESIAN_POINT('',(7.5E0,0.E0,9.E0));
++#425=DIRECTION('',(0.E0,-1.E0,0.E0));
++#426=DIRECTION('',(0.E0,0.E0,1.E0));
++#427=AXIS2_PLACEMENT_3D('',#424,#425,#426);
++#429=DIRECTION('',(1.E0,0.E0,0.E0));
++#430=VECTOR('',#429,3.E0);
++#431=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));
++#432=LINE('',#431,#430);
++#433=CARTESIAN_POINT('',(1.05E1,0.E0,1.8E1));
++#434=DIRECTION('',(0.E0,-1.E0,0.E0));
++#435=DIRECTION('',(0.E0,0.E0,-1.E0));
++#436=AXIS2_PLACEMENT_3D('',#433,#434,#435);
++#438=DIRECTION('',(-1.E0,0.E0,0.E0));
++#439=VECTOR('',#438,3.E0);
++#440=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));
++#441=LINE('',#440,#439);
++#442=CARTESIAN_POINT('',(7.5E0,0.E0,1.8E1));
++#443=DIRECTION('',(0.E0,-1.E0,0.E0));
++#444=DIRECTION('',(0.E0,0.E0,1.E0));
++#445=AXIS2_PLACEMENT_3D('',#442,#443,#444);
++#447=DIRECTION('',(1.E0,0.E0,0.E0));
++#448=VECTOR('',#447,3.E0);
++#449=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));
++#450=LINE('',#449,#448);
++#451=CARTESIAN_POINT('',(7.5E0,0.E0,3.075E1));
++#452=DIRECTION('',(0.E0,1.E0,0.E0));
++#453=DIRECTION('',(0.E0,0.E0,-1.E0));
++#454=AXIS2_PLACEMENT_3D('',#451,#452,#453);
++#456=DIRECTION('',(-1.E0,0.E0,0.E0));
++#457=VECTOR('',#456,3.E0);
++#458=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));
++#459=LINE('',#458,#457);
++#460=CARTESIAN_POINT('',(1.05E1,0.E0,3.075E1));
++#461=DIRECTION('',(0.E0,1.E0,0.E0));
++#462=DIRECTION('',(0.E0,0.E0,1.E0));
++#463=AXIS2_PLACEMENT_3D('',#460,#461,#462);
++#465=DIRECTION('',(-1.E0,0.E0,0.E0));
++#466=VECTOR('',#465,3.E0);
++#467=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));
++#468=LINE('',#467,#466);
++#469=CARTESIAN_POINT('',(1.65E1,0.E0,1.25E0));
++#470=DIRECTION('',(0.E0,1.E0,0.E0));
++#471=DIRECTION('',(0.E0,0.E0,1.E0));
++#472=AXIS2_PLACEMENT_3D('',#469,#470,#471);
++#474=DIRECTION('',(1.E0,0.E0,0.E0));
++#475=VECTOR('',#474,3.E0);
++#476=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));
++#477=LINE('',#476,#475);
++#478=CARTESIAN_POINT('',(1.35E1,0.E0,1.25E0));
++#479=DIRECTION('',(0.E0,1.E0,0.E0));
++#480=DIRECTION('',(0.E0,0.E0,-1.E0));
++#481=AXIS2_PLACEMENT_3D('',#478,#479,#480);
++#483=DIRECTION('',(0.E0,0.E0,-1.E0));
++#484=VECTOR('',#483,3.E0);
++#485=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));
++#486=LINE('',#485,#484);
++#487=CARTESIAN_POINT('',(2.275E1,0.E0,1.65E1));
++#488=DIRECTION('',(0.E0,1.E0,0.E0));
++#489=DIRECTION('',(-1.E0,0.E0,0.E0));
++#490=AXIS2_PLACEMENT_3D('',#487,#488,#489);
++#492=DIRECTION('',(0.E0,0.E0,1.E0));
++#493=VECTOR('',#492,3.E0);
++#494=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));
++#495=LINE('',#494,#493);
++#496=CARTESIAN_POINT('',(2.275E1,0.E0,1.35E1));
++#497=DIRECTION('',(0.E0,1.E0,0.E0));
++#498=DIRECTION('',(1.E0,0.E0,0.E0));
++#499=AXIS2_PLACEMENT_3D('',#496,#497,#498);
++#501=DIRECTION('',(0.E0,0.E0,-1.E0));
++#502=VECTOR('',#501,3.E0);
++#503=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));
++#504=LINE('',#503,#502);
++#505=CARTESIAN_POINT('',(2.275E1,0.E0,2.25E1));
++#506=DIRECTION('',(0.E0,1.E0,0.E0));
++#507=DIRECTION('',(-1.E0,0.E0,0.E0));
++#508=AXIS2_PLACEMENT_3D('',#505,#506,#507);
++#510=DIRECTION('',(0.E0,0.E0,1.E0));
++#511=VECTOR('',#510,3.E0);
++#512=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));
++#513=LINE('',#512,#511);
++#514=CARTESIAN_POINT('',(2.275E1,0.E0,1.95E1));
++#515=DIRECTION('',(0.E0,1.E0,0.E0));
++#516=DIRECTION('',(1.E0,0.E0,0.E0));
++#517=AXIS2_PLACEMENT_3D('',#514,#515,#516);
++#519=DIRECTION('',(-1.E0,0.E0,0.E0));
++#520=VECTOR('',#519,3.E0);
++#521=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));
++#522=LINE('',#521,#520);
++#523=CARTESIAN_POINT('',(1.65E1,0.E0,9.E0));
++#524=DIRECTION('',(0.E0,1.E0,0.E0));
++#525=DIRECTION('',(0.E0,0.E0,1.E0));
++#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);
++#528=DIRECTION('',(1.E0,0.E0,0.E0));
++#529=VECTOR('',#528,3.E0);
++#530=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));
++#531=LINE('',#530,#529);
++#532=CARTESIAN_POINT('',(1.35E1,0.E0,9.E0));
++#533=DIRECTION('',(0.E0,1.E0,0.E0));
++#534=DIRECTION('',(0.E0,0.E0,-1.E0));
++#535=AXIS2_PLACEMENT_3D('',#532,#533,#534);
++#537=DIRECTION('',(-1.E0,0.E0,0.E0));
++#538=VECTOR('',#537,3.E0);
++#539=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));
++#540=LINE('',#539,#538);
++#541=CARTESIAN_POINT('',(1.65E1,0.E0,1.8E1));
++#542=DIRECTION('',(0.E0,1.E0,0.E0));
++#543=DIRECTION('',(0.E0,0.E0,1.E0));
++#544=AXIS2_PLACEMENT_3D('',#541,#542,#543);
++#546=DIRECTION('',(1.E0,0.E0,0.E0));
++#547=VECTOR('',#546,3.E0);
++#548=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));
++#549=LINE('',#548,#547);
++#550=CARTESIAN_POINT('',(1.35E1,0.E0,1.8E1));
++#551=DIRECTION('',(0.E0,1.E0,0.E0));
++#552=DIRECTION('',(0.E0,0.E0,-1.E0));
++#553=AXIS2_PLACEMENT_3D('',#550,#551,#552);
++#555=DIRECTION('',(-1.E0,0.E0,0.E0));
++#556=VECTOR('',#555,3.E0);
++#557=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));
++#558=LINE('',#557,#556);
++#559=CARTESIAN_POINT('',(1.35E1,0.E0,3.075E1));
++#560=DIRECTION('',(0.E0,-1.E0,0.E0));
++#561=DIRECTION('',(0.E0,0.E0,1.E0));
++#562=AXIS2_PLACEMENT_3D('',#559,#560,#561);
++#564=DIRECTION('',(1.E0,0.E0,0.E0));
++#565=VECTOR('',#564,3.E0);
++#566=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));
++#567=LINE('',#566,#565);
++#568=CARTESIAN_POINT('',(1.65E1,0.E0,3.075E1));
++#569=DIRECTION('',(0.E0,-1.E0,0.E0));
++#570=DIRECTION('',(0.E0,0.E0,-1.E0));
++#571=AXIS2_PLACEMENT_3D('',#568,#569,#570);
++#573=DIRECTION('',(0.E0,0.E0,1.E0));
++#574=VECTOR('',#573,3.1E-1);
++#575=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));
++#576=LINE('',#575,#574);
++#577=CARTESIAN_POINT('',(2.274875E1,0.E0,7.5E0));
++#578=DIRECTION('',(0.E0,1.E0,0.E0));
++#579=DIRECTION('',(1.E0,0.E0,-3.956251312695E-14));
++#580=AXIS2_PLACEMENT_3D('',#577,#578,#579);
++#582=DIRECTION('',(2.292073341162E-14,0.E0,-1.E0));
++#583=VECTOR('',#582,3.1E-1);
++#584=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));
++#585=LINE('',#584,#583);
++#586=DIRECTION('',(-1.E0,0.E0,0.E0));
++#587=VECTOR('',#586,2.425E-1);
++#588=CARTESIAN_POINT('',(2.44325E1,0.E0,8.69E0));
++#589=LINE('',#588,#587);
++#590=DIRECTION('',(0.E0,0.E0,-1.E0));
++#591=VECTOR('',#590,8.E-1);
++#592=CARTESIAN_POINT('',(2.53125E1,0.E0,1.037E1));
++#593=LINE('',#592,#591);
++#594=DIRECTION('',(1.E0,0.E0,0.E0));
++#595=VECTOR('',#594,3.865E0);
++#596=CARTESIAN_POINT('',(2.05675E1,0.E0,1.125E1));
++#597=LINE('',#596,#595);
++#598=DIRECTION('',(0.E0,0.E0,1.E0));
++#599=VECTOR('',#598,8.E-1);
++#600=CARTESIAN_POINT('',(1.96875E1,0.E0,9.57E0));
++#601=LINE('',#600,#599);
++#602=DIRECTION('',(-1.E0,0.E0,0.E0));
++#603=VECTOR('',#602,7.4E-1);
++#604=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));
++#605=LINE('',#604,#603);
++#606=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#607=VECTOR('',#606,4.263248410977E0);
++#608=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));
++#609=LINE('',#608,#607);
++#610=CARTESIAN_POINT('',(2.239E1,0.E0,4.5E0));
++#611=DIRECTION('',(0.E0,1.E0,0.E0));
++#612=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));
++#613=AXIS2_PLACEMENT_3D('',#610,#611,#612);
++#615=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));
++#616=DIRECTION('',(0.E0,1.E0,0.E0));
++#617=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));
++#618=AXIS2_PLACEMENT_3D('',#615,#616,#617);
++#620=CARTESIAN_POINT('',(1.944696065761E1,0.E0,1.645354088550E0));
++#621=DIRECTION('',(0.E0,1.E0,0.E0));
++#622=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811866E-1));
++#623=AXIS2_PLACEMENT_3D('',#620,#621,#622);
++#625=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#626=VECTOR('',#625,4.263248410977E0);
++#627=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));
++#628=LINE('',#627,#626);
++#629=CARTESIAN_POINT('',(1.61E0,0.E0,2.75E1));
++#630=DIRECTION('',(0.E0,1.E0,0.E0));
++#631=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));
++#632=AXIS2_PLACEMENT_3D('',#629,#630,#631);
++#634=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));
++#635=DIRECTION('',(0.E0,1.E0,0.E0));
++#636=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));
++#637=AXIS2_PLACEMENT_3D('',#634,#635,#636);
++#639=CARTESIAN_POINT('',(4.553039342392E0,0.E0,3.035464591145E1));
++#640=DIRECTION('',(0.E0,1.E0,0.E0));
++#641=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#642=AXIS2_PLACEMENT_3D('',#639,#640,#641);
++#644=CARTESIAN_POINT('',(2.239E1,0.E0,2.75E1));
++#645=DIRECTION('',(0.E0,-1.E0,0.E0));
++#646=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));
++#647=AXIS2_PLACEMENT_3D('',#644,#645,#646);
++#649=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#650=VECTOR('',#649,4.263248410977E0);
++#651=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));
++#652=LINE('',#651,#650);
++#653=CARTESIAN_POINT('',(1.944696065761E1,0.E0,3.035464591145E1));
++#654=DIRECTION('',(0.E0,-1.E0,0.E0));
++#655=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811866E-1));
++#656=AXIS2_PLACEMENT_3D('',#653,#654,#655);
++#658=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));
++#659=DIRECTION('',(0.E0,-1.E0,0.E0));
++#660=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));
++#661=AXIS2_PLACEMENT_3D('',#658,#659,#660);
++#663=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));
++#664=DIRECTION('',(0.E0,0.E0,-1.E0));
++#665=DIRECTION('',(-1.E0,0.E0,0.E0));
++#666=AXIS2_PLACEMENT_3D('',#663,#664,#665);
++#668=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));
++#669=DIRECTION('',(0.E0,0.E0,-1.E0));
++#670=DIRECTION('',(1.E0,0.E0,0.E0));
++#671=AXIS2_PLACEMENT_3D('',#668,#669,#670);
++#673=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));
++#674=DIRECTION('',(0.E0,0.E0,-1.E0));
++#675=DIRECTION('',(-1.E0,0.E0,0.E0));
++#676=AXIS2_PLACEMENT_3D('',#673,#674,#675);
++#678=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));
++#679=DIRECTION('',(0.E0,0.E0,-1.E0));
++#680=DIRECTION('',(1.E0,0.E0,0.E0));
++#681=AXIS2_PLACEMENT_3D('',#678,#679,#680);
++#683=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));
++#684=DIRECTION('',(0.E0,0.E0,-1.E0));
++#685=DIRECTION('',(-1.E0,0.E0,0.E0));
++#686=AXIS2_PLACEMENT_3D('',#683,#684,#685);
++#688=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));
++#689=DIRECTION('',(0.E0,0.E0,-1.E0));
++#690=DIRECTION('',(1.E0,0.E0,0.E0));
++#691=AXIS2_PLACEMENT_3D('',#688,#689,#690);
++#693=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));
++#694=DIRECTION('',(0.E0,0.E0,-1.E0));
++#695=DIRECTION('',(-1.E0,0.E0,0.E0));
++#696=AXIS2_PLACEMENT_3D('',#693,#694,#695);
++#698=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));
++#699=DIRECTION('',(0.E0,0.E0,-1.E0));
++#700=DIRECTION('',(1.E0,0.E0,0.E0));
++#701=AXIS2_PLACEMENT_3D('',#698,#699,#700);
++#703=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));
++#704=DIRECTION('',(0.E0,0.E0,1.E0));
++#705=DIRECTION('',(1.E0,0.E0,0.E0));
++#706=AXIS2_PLACEMENT_3D('',#703,#704,#705);
++#708=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));
++#709=DIRECTION('',(0.E0,0.E0,1.E0));
++#710=DIRECTION('',(-1.E0,0.E0,0.E0));
++#711=AXIS2_PLACEMENT_3D('',#708,#709,#710);
++#713=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));
++#714=DIRECTION('',(0.E0,0.E0,1.E0));
++#715=DIRECTION('',(1.E0,0.E0,0.E0));
++#716=AXIS2_PLACEMENT_3D('',#713,#714,#715);
++#718=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));
++#719=DIRECTION('',(0.E0,0.E0,1.E0));
++#720=DIRECTION('',(-1.E0,0.E0,0.E0));
++#721=AXIS2_PLACEMENT_3D('',#718,#719,#720);
++#723=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));
++#724=DIRECTION('',(0.E0,0.E0,1.E0));
++#725=DIRECTION('',(1.E0,0.E0,0.E0));
++#726=AXIS2_PLACEMENT_3D('',#723,#724,#725);
++#728=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));
++#729=DIRECTION('',(0.E0,0.E0,1.E0));
++#730=DIRECTION('',(-1.E0,0.E0,0.E0));
++#731=AXIS2_PLACEMENT_3D('',#728,#729,#730);
++#733=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));
++#734=DIRECTION('',(0.E0,0.E0,1.E0));
++#735=DIRECTION('',(1.E0,0.E0,0.E0));
++#736=AXIS2_PLACEMENT_3D('',#733,#734,#735);
++#738=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));
++#739=DIRECTION('',(0.E0,0.E0,1.E0));
++#740=DIRECTION('',(-1.E0,0.E0,0.E0));
++#741=AXIS2_PLACEMENT_3D('',#738,#739,#740);
++#743=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#744=VECTOR('',#743,1.029563014099E1);
++#745=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));
++#746=LINE('',#745,#744);
++#747=DIRECTION('',(-1.E0,0.E0,0.E0));
++#748=VECTOR('',#747,2.E0);
++#749=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));
++#750=LINE('',#749,#748);
++#751=DIRECTION('',(-1.E0,0.E0,0.E0));
++#752=VECTOR('',#751,2.E0);
++#753=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));
++#754=LINE('',#753,#752);
++#755=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#756=VECTOR('',#755,1.029563014099E1);
++#757=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));
++#758=LINE('',#757,#756);
++#759=DIRECTION('',(-1.E0,0.E0,0.E0));
++#760=VECTOR('',#759,3.895172754280E0);
++#761=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));
++#762=LINE('',#761,#760);
++#763=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));
++#764=VECTOR('',#763,6.863753427325E0);
++#765=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));
++#766=LINE('',#765,#764);
++#767=DIRECTION('',(1.E0,0.E0,0.E0));
++#768=VECTOR('',#767,5.618394209466E-1);
++#769=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));
++#770=LINE('',#769,#768);
++#771=DIRECTION('',(0.E0,-1.E0,0.E0));
++#772=VECTOR('',#771,6.E0);
++#773=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));
++#774=LINE('',#773,#772);
++#775=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));
++#776=VECTOR('',#775,6.863753427325E0);
++#777=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.E0));
++#778=LINE('',#777,#776);
++#779=DIRECTION('',(1.E0,0.E0,0.E0));
++#780=VECTOR('',#779,3.895172754280E0);
++#781=CARTESIAN_POINT('',(2.025E1,2.E0,8.E0));
++#782=LINE('',#781,#780);
++#783=DIRECTION('',(0.E0,-1.E0,0.E0));
++#784=VECTOR('',#783,6.E0);
++#785=CARTESIAN_POINT('',(1.95E1,8.75E0,8.E0));
++#786=LINE('',#785,#784);
++#787=DIRECTION('',(-1.E0,0.E0,0.E0));
++#788=VECTOR('',#787,5.618394209466E-1);
++#789=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.E0));
++#790=LINE('',#789,#788);
++#791=DIRECTION('',(0.E0,0.E0,1.E0));
++#792=VECTOR('',#791,2.5E-1);
++#793=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.E0));
++#794=LINE('',#793,#792);
++#795=DIRECTION('',(0.E0,0.E0,1.E0));
++#796=VECTOR('',#795,2.5E-1);
++#797=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.E0));
++#798=LINE('',#797,#796);
++#799=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));
++#800=DIRECTION('',(0.E0,0.E0,-1.E0));
++#801=DIRECTION('',(-1.E0,0.E0,0.E0));
++#802=AXIS2_PLACEMENT_3D('',#799,#800,#801);
++#804=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));
++#805=DIRECTION('',(0.E0,0.E0,-1.E0));
++#806=DIRECTION('',(1.E0,0.E0,0.E0));
++#807=AXIS2_PLACEMENT_3D('',#804,#805,#806);
++#809=DIRECTION('',(0.E0,0.E0,1.E0));
++#810=VECTOR('',#809,2.E0);
++#811=CARTESIAN_POINT('',(1.95875E1,1.05E1,8.E0));
++#812=LINE('',#811,#810);
++#813=DIRECTION('',(0.E0,0.E0,1.E0));
++#814=VECTOR('',#813,2.E0);
++#815=CARTESIAN_POINT('',(1.99125E1,1.05E1,8.E0));
++#816=LINE('',#815,#814);
++#817=CARTESIAN_POINT('',(1.975E1,1.05E1,1.E1));
++#818=DIRECTION('',(0.E0,0.E0,-1.E0));
++#819=DIRECTION('',(-1.E0,0.E0,0.E0));
++#820=AXIS2_PLACEMENT_3D('',#817,#818,#819);
++#822=CARTESIAN_POINT('',(1.975E1,1.05E1,1.E1));
++#823=DIRECTION('',(0.E0,0.E0,-1.E0));
++#824=DIRECTION('',(1.E0,0.E0,0.E0));
++#825=AXIS2_PLACEMENT_3D('',#822,#823,#824);
++#827=DIRECTION('',(0.E0,1.E0,0.E0));
++#828=VECTOR('',#827,5.E0);
++#829=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));
++#830=LINE('',#829,#828);
++#831=DIRECTION('',(-1.E0,0.E0,0.E0));
++#832=VECTOR('',#831,1.75E0);
++#833=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));
++#834=LINE('',#833,#832);
++#835=DIRECTION('',(0.E0,1.E0,0.E0));
++#836=VECTOR('',#835,5.E0);
++#837=CARTESIAN_POINT('',(2.2E1,1.5E0,1.E1));
++#838=LINE('',#837,#836);
++#839=DIRECTION('',(0.E0,1.E0,0.E0));
++#840=VECTOR('',#839,1.E1);
++#841=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));
++#842=LINE('',#841,#840);
++#843=DIRECTION('',(1.E0,0.E0,0.E0));
++#844=VECTOR('',#843,2.E0);
++#845=CARTESIAN_POINT('',(1.9E1,1.15E1,1.E1));
++#846=LINE('',#845,#844);
++#847=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#848=VECTOR('',#847,1.029563014099E1);
++#849=CARTESIAN_POINT('',(2.1E1,1.15E1,1.E1));
++#850=LINE('',#849,#848);
++#851=DIRECTION('',(0.E0,-1.E0,0.E0));
++#852=VECTOR('',#851,1.E0);
++#853=CARTESIAN_POINT('',(2.6E1,2.5E0,1.E1));
++#854=LINE('',#853,#852);
++#855=DIRECTION('',(-1.E0,0.E0,0.E0));
++#856=VECTOR('',#855,1.972007605460E-1);
++#857=CARTESIAN_POINT('',(2.204720076055E1,7.E0,1.E1));
++#858=LINE('',#857,#856);
++#859=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#860=VECTOR('',#859,2.059126028197E0);
++#861=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,1.E1));
++#862=LINE('',#861,#860);
++#863=DIRECTION('',(1.E0,0.E0,0.E0));
++#864=VECTOR('',#863,1.197200760546E0);
++#865=CARTESIAN_POINT('',(1.985E1,9.5E0,1.E1));
++#866=LINE('',#865,#864);
++#867=DIRECTION('',(0.E0,1.E0,0.E0));
++#868=VECTOR('',#867,6.8E0);
++#869=CARTESIAN_POINT('',(1.95E1,2.35E0,1.E1));
++#870=LINE('',#869,#868);
++#871=DIRECTION('',(-1.E0,0.E0,0.E0));
++#872=VECTOR('',#871,1.3E0);
++#873=CARTESIAN_POINT('',(2.115E1,2.E0,1.E1));
++#874=LINE('',#873,#872);
++#875=DIRECTION('',(0.E0,-1.E0,0.E0));
++#876=VECTOR('',#875,4.3E0);
++#877=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));
++#878=LINE('',#877,#876);
++#879=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#880=VECTOR('',#879,5.773502691896E0);
++#881=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));
++#882=LINE('',#881,#880);
++#883=CARTESIAN_POINT('',(6.45E0,1.5E0,2.975E1));
++#884=DIRECTION('',(0.E0,-1.E0,0.E0));
++#885=DIRECTION('',(-1.E0,0.E0,0.E0));
++#886=AXIS2_PLACEMENT_3D('',#883,#884,#885);
++#888=CARTESIAN_POINT('',(6.45E0,1.5E0,2.975E1));
++#889=DIRECTION('',(0.E0,-1.E0,0.E0));
++#890=DIRECTION('',(1.E0,0.E0,0.E0));
++#891=AXIS2_PLACEMENT_3D('',#888,#889,#890);
++#893=CARTESIAN_POINT('',(7.45E0,1.5E0,2.975E1));
++#894=DIRECTION('',(0.E0,-1.E0,0.E0));
++#895=DIRECTION('',(-1.E0,0.E0,0.E0));
++#896=AXIS2_PLACEMENT_3D('',#893,#894,#895);
++#898=CARTESIAN_POINT('',(7.45E0,1.5E0,2.975E1));
++#899=DIRECTION('',(0.E0,-1.E0,0.E0));
++#900=DIRECTION('',(1.E0,0.E0,0.E0));
++#901=AXIS2_PLACEMENT_3D('',#898,#899,#900);
++#903=DIRECTION('',(-1.E0,0.E0,0.E0));
++#904=VECTOR('',#903,4.531373033403E0);
++#905=CARTESIAN_POINT('',(2.5E1,1.5E0,8.E0));
++#906=LINE('',#905,#904);
++#907=DIRECTION('',(-1.E0,0.E0,0.E0));
++#908=VECTOR('',#907,9.E0);
++#909=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));
++#910=LINE('',#909,#908);
++#911=DIRECTION('',(-1.E0,0.E0,0.E0));
++#912=VECTOR('',#911,4.531373033403E0);
++#913=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));
++#914=LINE('',#913,#912);
++#915=DIRECTION('',(0.E0,0.E0,1.E0));
++#916=VECTOR('',#915,3.E0);
++#917=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));
++#918=LINE('',#917,#916);
++#919=DIRECTION('',(-1.E0,0.E0,0.E0));
++#920=VECTOR('',#919,1.6E1);
++#921=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));
++#922=LINE('',#921,#920);
++#923=DIRECTION('',(0.E0,0.E0,-1.E0));
++#924=VECTOR('',#923,3.E0);
++#925=CARTESIAN_POINT('',(2.4E1,1.5E0,7.E0));
++#926=LINE('',#925,#924);
++#927=CARTESIAN_POINT('',(1.755E1,1.5E0,2.975E1));
++#928=DIRECTION('',(0.E0,1.E0,0.E0));
++#929=DIRECTION('',(1.E0,0.E0,0.E0));
++#930=AXIS2_PLACEMENT_3D('',#927,#928,#929);
++#932=CARTESIAN_POINT('',(1.755E1,1.5E0,2.975E1));
++#933=DIRECTION('',(0.E0,1.E0,0.E0));
++#934=DIRECTION('',(-1.E0,0.E0,0.E0));
++#935=AXIS2_PLACEMENT_3D('',#932,#933,#934);
++#937=CARTESIAN_POINT('',(1.655E1,1.5E0,2.975E1));
++#938=DIRECTION('',(0.E0,1.E0,0.E0));
++#939=DIRECTION('',(1.E0,0.E0,0.E0));
++#940=AXIS2_PLACEMENT_3D('',#937,#938,#939);
++#942=CARTESIAN_POINT('',(1.655E1,1.5E0,2.975E1));
++#943=DIRECTION('',(0.E0,1.E0,0.E0));
++#944=DIRECTION('',(-1.E0,0.E0,0.E0));
++#945=AXIS2_PLACEMENT_3D('',#942,#943,#944);
++#947=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#948=DIRECTION('',(0.E0,-1.E0,0.E0));
++#949=DIRECTION('',(1.E0,0.E0,0.E0));
++#950=AXIS2_PLACEMENT_3D('',#947,#948,#949);
++#952=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#953=DIRECTION('',(0.E0,-1.E0,0.E0));
++#954=DIRECTION('',(-1.E0,0.E0,0.E0));
++#955=AXIS2_PLACEMENT_3D('',#952,#953,#954);
++#957=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#958=DIRECTION('',(0.E0,-1.E0,0.E0));
++#959=DIRECTION('',(1.E0,0.E0,0.E0));
++#960=AXIS2_PLACEMENT_3D('',#957,#958,#959);
++#962=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#963=DIRECTION('',(0.E0,-1.E0,0.E0));
++#964=DIRECTION('',(-1.E0,0.E0,0.E0));
++#965=AXIS2_PLACEMENT_3D('',#962,#963,#964);
++#967=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#968=DIRECTION('',(0.E0,-1.E0,0.E0));
++#969=DIRECTION('',(1.E0,0.E0,0.E0));
++#970=AXIS2_PLACEMENT_3D('',#967,#968,#969);
++#972=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#973=DIRECTION('',(0.E0,-1.E0,0.E0));
++#974=DIRECTION('',(-1.E0,0.E0,0.E0));
++#975=AXIS2_PLACEMENT_3D('',#972,#973,#974);
++#977=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#978=DIRECTION('',(0.E0,-1.E0,0.E0));
++#979=DIRECTION('',(1.E0,0.E0,0.E0));
++#980=AXIS2_PLACEMENT_3D('',#977,#978,#979);
++#982=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#983=DIRECTION('',(0.E0,-1.E0,0.E0));
++#984=DIRECTION('',(-1.E0,0.E0,0.E0));
++#985=AXIS2_PLACEMENT_3D('',#982,#983,#984);
++#987=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#988=DIRECTION('',(0.E0,-1.E0,0.E0));
++#989=DIRECTION('',(1.E0,0.E0,0.E0));
++#990=AXIS2_PLACEMENT_3D('',#987,#988,#989);
++#992=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#993=DIRECTION('',(0.E0,-1.E0,0.E0));
++#994=DIRECTION('',(-1.E0,0.E0,0.E0));
++#995=AXIS2_PLACEMENT_3D('',#992,#993,#994);
++#997=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#998=DIRECTION('',(0.E0,-1.E0,0.E0));
++#999=DIRECTION('',(1.E0,0.E0,0.E0));
++#1000=AXIS2_PLACEMENT_3D('',#997,#998,#999);
++#1002=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#1003=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1004=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1005=AXIS2_PLACEMENT_3D('',#1002,#1003,#1004);
++#1007=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#1008=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1009=DIRECTION('',(1.E0,0.E0,0.E0));
++#1010=AXIS2_PLACEMENT_3D('',#1007,#1008,#1009);
++#1012=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#1013=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1014=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1015=AXIS2_PLACEMENT_3D('',#1012,#1013,#1014);
++#1017=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#1018=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1019=DIRECTION('',(1.E0,0.E0,0.E0));
++#1020=AXIS2_PLACEMENT_3D('',#1017,#1018,#1019);
++#1022=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#1023=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1024=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1025=AXIS2_PLACEMENT_3D('',#1022,#1023,#1024);
++#1027=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#1028=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1029=DIRECTION('',(1.E0,0.E0,0.E0));
++#1030=AXIS2_PLACEMENT_3D('',#1027,#1028,#1029);
++#1032=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#1033=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1034=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1035=AXIS2_PLACEMENT_3D('',#1032,#1033,#1034);
++#1037=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#1038=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1039=DIRECTION('',(1.E0,0.E0,0.E0));
++#1040=AXIS2_PLACEMENT_3D('',#1037,#1038,#1039);
++#1042=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#1043=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1044=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1045=AXIS2_PLACEMENT_3D('',#1042,#1043,#1044);
++#1047=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#1048=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1049=DIRECTION('',(1.E0,0.E0,0.E0));
++#1050=AXIS2_PLACEMENT_3D('',#1047,#1048,#1049);
++#1052=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#1053=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1054=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1055=AXIS2_PLACEMENT_3D('',#1052,#1053,#1054);
++#1057=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#1058=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1059=DIRECTION('',(1.E0,0.E0,0.E0));
++#1060=AXIS2_PLACEMENT_3D('',#1057,#1058,#1059);
++#1062=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#1063=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1064=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1065=AXIS2_PLACEMENT_3D('',#1062,#1063,#1064);
++#1067=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1068=VECTOR('',#1067,2.5625E0);
++#1069=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));
++#1070=LINE('',#1069,#1068);
++#1071=DIRECTION('',(1.E0,0.E0,0.E0));
++#1072=VECTOR('',#1071,1.3E1);
++#1073=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));
++#1074=LINE('',#1073,#1072);
++#1075=DIRECTION('',(0.E0,0.E0,1.E0));
++#1076=VECTOR('',#1075,2.5625E0);
++#1077=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));
++#1078=LINE('',#1077,#1076);
++#1079=DIRECTION('',(1.E0,0.E0,0.E0));
++#1080=VECTOR('',#1079,9.E0);
++#1081=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));
++#1082=LINE('',#1081,#1080);
++#1083=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1084=VECTOR('',#1083,1.3E1);
++#1085=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));
++#1086=LINE('',#1085,#1084);
++#1087=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1088=VECTOR('',#1087,8.125E-1);
++#1089=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));
++#1090=LINE('',#1089,#1088);
++#1091=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1092=VECTOR('',#1091,1.E0);
++#1093=CARTESIAN_POINT('',(2.05E1,1.5E0,1.225E1));
++#1094=LINE('',#1093,#1092);
++#1095=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1096=VECTOR('',#1095,7.5E-1);
++#1097=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));
++#1098=LINE('',#1097,#1096);
++#1099=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1100=VECTOR('',#1099,7.5E-1);
++#1101=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));
++#1102=LINE('',#1101,#1100);
++#1103=DIRECTION('',(1.E0,0.E0,0.E0));
++#1104=VECTOR('',#1103,1.E0);
++#1105=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));
++#1106=LINE('',#1105,#1104);
++#1107=DIRECTION('',(0.E0,0.E0,1.E0));
++#1108=VECTOR('',#1107,8.125E-1);
++#1109=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));
++#1110=LINE('',#1109,#1108);
++#1111=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#1112=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1113=DIRECTION('',(1.E0,0.E0,0.E0));
++#1114=AXIS2_PLACEMENT_3D('',#1111,#1112,#1113);
++#1116=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#1117=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1118=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1119=AXIS2_PLACEMENT_3D('',#1116,#1117,#1118);
++#1121=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#1122=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1123=DIRECTION('',(1.E0,0.E0,0.E0));
++#1124=AXIS2_PLACEMENT_3D('',#1121,#1122,#1123);
++#1126=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#1127=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1128=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1129=AXIS2_PLACEMENT_3D('',#1126,#1127,#1128);
++#1131=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#1132=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1133=DIRECTION('',(1.E0,0.E0,0.E0));
++#1134=AXIS2_PLACEMENT_3D('',#1131,#1132,#1133);
++#1136=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#1137=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1138=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1139=AXIS2_PLACEMENT_3D('',#1136,#1137,#1138);
++#1141=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#1142=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1143=DIRECTION('',(1.E0,0.E0,0.E0));
++#1144=AXIS2_PLACEMENT_3D('',#1141,#1142,#1143);
++#1146=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#1147=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1148=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1149=AXIS2_PLACEMENT_3D('',#1146,#1147,#1148);
++#1151=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#1152=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1153=DIRECTION('',(1.E0,0.E0,0.E0));
++#1154=AXIS2_PLACEMENT_3D('',#1151,#1152,#1153);
++#1156=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#1157=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1158=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1159=AXIS2_PLACEMENT_3D('',#1156,#1157,#1158);
++#1161=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#1162=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1163=DIRECTION('',(1.E0,0.E0,0.E0));
++#1164=AXIS2_PLACEMENT_3D('',#1161,#1162,#1163);
++#1166=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#1167=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1168=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1169=AXIS2_PLACEMENT_3D('',#1166,#1167,#1168);
++#1171=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1172=VECTOR('',#1171,2.886751345948E0);
++#1173=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));
++#1174=LINE('',#1173,#1172);
++#1175=DIRECTION('',(1.E0,0.E0,0.E0));
++#1176=VECTOR('',#1175,2.25E0);
++#1177=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));
++#1178=LINE('',#1177,#1176);
++#1179=DIRECTION('',(0.E0,0.E0,1.E0));
++#1180=VECTOR('',#1179,1.75E0);
++#1181=CARTESIAN_POINT('',(2.6E1,1.5E0,1.E1));
++#1182=LINE('',#1181,#1180);
++#1183=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1184=VECTOR('',#1183,5.E-1);
++#1185=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));
++#1186=LINE('',#1185,#1184);
++#1187=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1188=VECTOR('',#1187,1.475E1);
++#1189=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));
++#1190=LINE('',#1189,#1188);
++#1191=DIRECTION('',(1.E0,0.E0,0.E0));
++#1192=VECTOR('',#1191,1.6E1);
++#1193=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));
++#1194=LINE('',#1193,#1192);
++#1195=DIRECTION('',(0.E0,0.E0,1.E0));
++#1196=VECTOR('',#1195,1.475E1);
++#1197=CARTESIAN_POINT('',(0.E0,1.5E0,1.325E1));
++#1198=LINE('',#1197,#1196);
++#1199=DIRECTION('',(1.E0,0.E0,0.E0));
++#1200=VECTOR('',#1199,5.E-1);
++#1201=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));
++#1202=LINE('',#1201,#1200);
++#1203=DIRECTION('',(0.E0,0.E0,1.E0));
++#1204=VECTOR('',#1203,1.75E0);
++#1205=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));
++#1206=LINE('',#1205,#1204);
++#1207=DIRECTION('',(1.E0,0.E0,0.E0));
++#1208=VECTOR('',#1207,2.25E0);
++#1209=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));
++#1210=LINE('',#1209,#1208);
++#1211=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1212=VECTOR('',#1211,2.886751345948E0);
++#1213=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));
++#1214=LINE('',#1213,#1212);
++#1215=DIRECTION('',(1.E0,0.E0,0.E0));
++#1216=VECTOR('',#1215,1.75E0);
++#1217=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));
++#1218=LINE('',#1217,#1216);
++#1219=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1220=VECTOR('',#1219,2.886751345948E0);
++#1221=CARTESIAN_POINT('',(2.E0,1.5E0,1.288675134595E1));
++#1222=LINE('',#1221,#1220);
++#1223=DIRECTION('',(1.E0,0.E0,0.E0));
++#1224=VECTOR('',#1223,3.E0);
++#1225=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));
++#1226=LINE('',#1225,#1224);
++#1227=DIRECTION('',(1.E0,0.E0,0.E0));
++#1228=VECTOR('',#1227,1.4E1);
++#1229=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));
++#1230=LINE('',#1229,#1228);
++#1231=DIRECTION('',(1.E0,0.E0,0.E0));
++#1232=VECTOR('',#1231,3.E0);
++#1233=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));
++#1234=LINE('',#1233,#1232);
++#1235=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1236=VECTOR('',#1235,2.886751345948E0);
++#1237=CARTESIAN_POINT('',(2.2E1,1.5E0,1.288675134595E1));
++#1238=LINE('',#1237,#1236);
++#1239=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1240=VECTOR('',#1239,1.75E0);
++#1241=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));
++#1242=LINE('',#1241,#1240);
++#1243=DIRECTION('',(0.E0,1.E0,0.E0));
++#1244=VECTOR('',#1243,2.5E-1);
++#1245=CARTESIAN_POINT('',(6.35E0,1.25E0,2.975E1));
++#1246=LINE('',#1245,#1244);
++#1247=DIRECTION('',(0.E0,1.E0,0.E0));
++#1248=VECTOR('',#1247,2.5E-1);
++#1249=CARTESIAN_POINT('',(6.55E0,1.25E0,2.975E1));
++#1250=LINE('',#1249,#1248);
++#1251=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
++#1252=VECTOR('',#1251,1.154700538379E-1);
++#1253=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));
++#1254=LINE('',#1253,#1252);
++#1255=CARTESIAN_POINT('',(6.45E0,1.25E0,2.975E1));
++#1256=DIRECTION('',(0.E0,1.E0,0.E0));
++#1257=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1258=AXIS2_PLACEMENT_3D('',#1255,#1256,#1257);
++#1260=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
++#1261=VECTOR('',#1260,1.154700538379E-1);
++#1262=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));
++#1263=LINE('',#1262,#1261);
++#1264=CARTESIAN_POINT('',(6.45E0,1.25E0,2.975E1));
++#1265=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1266=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1267=AXIS2_PLACEMENT_3D('',#1264,#1265,#1266);
++#1269=DIRECTION('',(0.E0,1.E0,0.E0));
++#1270=VECTOR('',#1269,2.5E-1);
++#1271=CARTESIAN_POINT('',(7.35E0,1.25E0,2.975E1));
++#1272=LINE('',#1271,#1270);
++#1273=DIRECTION('',(0.E0,1.E0,0.E0));
++#1274=VECTOR('',#1273,2.5E-1);
++#1275=CARTESIAN_POINT('',(7.55E0,1.25E0,2.975E1));
++#1276=LINE('',#1275,#1274);
++#1277=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
++#1278=VECTOR('',#1277,1.154700538379E-1);
++#1279=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));
++#1280=LINE('',#1279,#1278);
++#1281=CARTESIAN_POINT('',(7.45E0,1.25E0,2.975E1));
++#1282=DIRECTION('',(0.E0,1.E0,0.E0));
++#1283=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1284=AXIS2_PLACEMENT_3D('',#1281,#1282,#1283);
++#1286=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
++#1287=VECTOR('',#1286,1.154700538379E-1);
++#1288=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));
++#1289=LINE('',#1288,#1287);
++#1290=CARTESIAN_POINT('',(7.45E0,1.25E0,2.975E1));
++#1291=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1292=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1293=AXIS2_PLACEMENT_3D('',#1290,#1291,#1292);
++#1295=DIRECTION('',(0.E0,1.E0,0.E0));
++#1296=VECTOR('',#1295,1.5E0);
++#1297=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));
++#1298=LINE('',#1297,#1296);
++#1299=CARTESIAN_POINT('',(2.046862696660E1,0.E0,7.E0));
++#1300=DIRECTION('',(0.E0,1.E0,0.E0));
++#1301=DIRECTION('',(0.E0,0.E0,1.E0));
++#1302=AXIS2_PLACEMENT_3D('',#1299,#1300,#1301);
++#1304=DIRECTION('',(0.E0,1.E0,0.E0));
++#1305=VECTOR('',#1304,1.5E0);
++#1306=CARTESIAN_POINT('',(2.146078370825E1,0.E0,6.875E0));
++#1307=LINE('',#1306,#1305);
++#1308=CARTESIAN_POINT('',(2.046862696660E1,1.5E0,7.E0));
++#1309=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1310=DIRECTION('',(9.921567416492E-1,0.E0,-1.25E-1));
++#1311=AXIS2_PLACEMENT_3D('',#1308,#1309,#1310);
++#1313=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));
++#1314=DIRECTION('',(0.E0,1.E0,0.E0));
++#1315=DIRECTION('',(9.921567416492E-1,0.E0,-1.25E-1));
++#1316=AXIS2_PLACEMENT_3D('',#1313,#1314,#1315);
++#1318=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1319=VECTOR('',#1318,1.5E0);
++#1320=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));
++#1321=LINE('',#1320,#1319);
++#1322=CARTESIAN_POINT('',(1.65E1,1.5E0,7.5E0));
++#1323=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1324=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1325=AXIS2_PLACEMENT_3D('',#1322,#1323,#1324);
++#1327=CARTESIAN_POINT('',(7.5E0,1.5E0,7.5E0));
++#1328=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1329=DIRECTION('',(-9.921567416492E-1,0.E0,-1.25E-1));
++#1330=AXIS2_PLACEMENT_3D('',#1327,#1328,#1329);
++#1332=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1333=VECTOR('',#1332,1.5E0);
++#1334=CARTESIAN_POINT('',(7.5E0,1.5E0,2.5E0));
++#1335=LINE('',#1334,#1333);
++#1336=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));
++#1337=DIRECTION('',(0.E0,1.E0,0.E0));
++#1338=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1339=AXIS2_PLACEMENT_3D('',#1336,#1337,#1338);
++#1341=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1342=VECTOR('',#1341,1.5E0);
++#1343=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));
++#1344=LINE('',#1343,#1342);
++#1345=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,7.E0));
++#1346=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1347=DIRECTION('',(0.E0,0.E0,1.E0));
++#1348=AXIS2_PLACEMENT_3D('',#1345,#1346,#1347);
++#1350=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1351=VECTOR('',#1350,1.5E0);
++#1352=CARTESIAN_POINT('',(2.539216291754E0,1.5E0,6.875E0));
++#1353=LINE('',#1352,#1351);
++#1354=CARTESIAN_POINT('',(3.531373033403E0,0.E0,7.E0));
++#1355=DIRECTION('',(0.E0,1.E0,0.E0));
++#1356=DIRECTION('',(-9.921567416492E-1,0.E0,-1.25E-1));
++#1357=AXIS2_PLACEMENT_3D('',#1354,#1355,#1356);
++#1359=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1360=VECTOR('',#1359,1.5E0);
++#1361=CARTESIAN_POINT('',(0.E0,1.5E0,7.E0));
++#1362=LINE('',#1361,#1360);
++#1363=CARTESIAN_POINT('',(-1.E0,1.5E0,7.E0));
++#1364=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1365=DIRECTION('',(1.E0,0.E0,0.E0));
++#1366=AXIS2_PLACEMENT_3D('',#1363,#1364,#1365);
++#1368=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1369=VECTOR('',#1368,1.5E0);
++#1370=CARTESIAN_POINT('',(-1.E0,1.5E0,8.E0));
++#1371=LINE('',#1370,#1369);
++#1372=CARTESIAN_POINT('',(-1.E0,0.E0,7.E0));
++#1373=DIRECTION('',(0.E0,1.E0,0.E0));
++#1374=DIRECTION('',(0.E0,0.E0,1.E0));
++#1375=AXIS2_PLACEMENT_3D('',#1372,#1373,#1374);
++#1377=DIRECTION('',(0.E0,1.E0,0.E0));
++#1378=VECTOR('',#1377,1.5E0);
++#1379=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));
++#1380=LINE('',#1379,#1378);
++#1381=CARTESIAN_POINT('',(-1.E0,0.E0,1.325E1));
++#1382=DIRECTION('',(0.E0,1.E0,0.E0));
++#1383=DIRECTION('',(1.E0,0.E0,0.E0));
++#1384=AXIS2_PLACEMENT_3D('',#1381,#1382,#1383);
++#1386=DIRECTION('',(0.E0,1.E0,0.E0));
++#1387=VECTOR('',#1386,1.5E0);
++#1388=CARTESIAN_POINT('',(-1.E0,0.E0,1.225E1));
++#1389=LINE('',#1388,#1387);
++#1390=CARTESIAN_POINT('',(-1.E0,1.5E0,1.325E1));
++#1391=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1392=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1393=AXIS2_PLACEMENT_3D('',#1390,#1391,#1392);
++#1395=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1396=VECTOR('',#1395,1.5E0);
++#1397=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));
++#1398=LINE('',#1397,#1396);
++#1399=CARTESIAN_POINT('',(3.5E0,1.5E0,1.325E1));
++#1400=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1401=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1402=AXIS2_PLACEMENT_3D('',#1399,#1400,#1401);
++#1404=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1405=VECTOR('',#1404,1.5E0);
++#1406=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));
++#1407=LINE('',#1406,#1405);
++#1408=CARTESIAN_POINT('',(3.5E0,0.E0,1.325E1));
++#1409=DIRECTION('',(0.E0,1.E0,0.E0));
++#1410=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1411=AXIS2_PLACEMENT_3D('',#1408,#1409,#1410);
++#1413=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1414=VECTOR('',#1413,1.5E0);
++#1415=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));
++#1416=LINE('',#1415,#1414);
++#1417=CARTESIAN_POINT('',(5.5E0,1.5E0,2.19375E1));
++#1418=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1419=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1420=AXIS2_PLACEMENT_3D('',#1417,#1418,#1419);
++#1422=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1423=VECTOR('',#1422,1.5E0);
++#1424=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));
++#1425=LINE('',#1424,#1423);
++#1426=CARTESIAN_POINT('',(5.5E0,0.E0,2.19375E1));
++#1427=DIRECTION('',(0.E0,1.E0,0.E0));
++#1428=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1429=AXIS2_PLACEMENT_3D('',#1426,#1427,#1428);
++#1431=DIRECTION('',(0.E0,1.E0,0.E0));
++#1432=VECTOR('',#1431,1.5E0);
++#1433=CARTESIAN_POINT('',(2.15E1,0.E0,2.19375E1));
++#1434=LINE('',#1433,#1432);
++#1435=CARTESIAN_POINT('',(1.85E1,0.E0,2.19375E1));
++#1436=DIRECTION('',(0.E0,1.E0,0.E0));
++#1437=DIRECTION('',(1.E0,0.E0,0.E0));
++#1438=AXIS2_PLACEMENT_3D('',#1435,#1436,#1437);
++#1440=DIRECTION('',(0.E0,1.E0,0.E0));
++#1441=VECTOR('',#1440,1.5E0);
++#1442=CARTESIAN_POINT('',(1.85E1,0.E0,1.89375E1));
++#1443=LINE('',#1442,#1441);
++#1444=CARTESIAN_POINT('',(1.85E1,1.5E0,2.19375E1));
++#1445=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1446=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1447=AXIS2_PLACEMENT_3D('',#1444,#1445,#1446);
++#1449=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1450=VECTOR('',#1449,1.5E0);
++#1451=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));
++#1452=LINE('',#1451,#1450);
++#1453=CARTESIAN_POINT('',(1.65E1,1.5E0,2.45E1));
++#1454=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1455=DIRECTION('',(1.E0,0.E0,0.E0));
++#1456=AXIS2_PLACEMENT_3D('',#1453,#1454,#1455);
++#1458=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1459=VECTOR('',#1458,1.5E0);
++#1460=CARTESIAN_POINT('',(1.65E1,1.5E0,2.95E1));
++#1461=LINE('',#1460,#1459);
++#1462=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));
++#1463=DIRECTION('',(0.E0,1.E0,0.E0));
++#1464=DIRECTION('',(0.E0,0.E0,1.E0));
++#1465=AXIS2_PLACEMENT_3D('',#1462,#1463,#1464);
++#1467=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1468=VECTOR('',#1467,1.5E0);
++#1469=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));
++#1470=LINE('',#1469,#1468);
++#1471=CARTESIAN_POINT('',(7.5E0,1.5E0,2.45E1));
++#1472=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1473=DIRECTION('',(0.E0,0.E0,1.E0));
++#1474=AXIS2_PLACEMENT_3D('',#1471,#1472,#1473);
++#1476=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1477=VECTOR('',#1476,1.5E0);
++#1478=CARTESIAN_POINT('',(2.5E0,1.5E0,2.45E1));
++#1479=LINE('',#1478,#1477);
++#1480=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));
++#1481=DIRECTION('',(0.E0,1.E0,0.E0));
++#1482=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1483=AXIS2_PLACEMENT_3D('',#1480,#1481,#1482);
++#1485=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1486=VECTOR('',#1485,1.5E0);
++#1487=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));
++#1488=LINE('',#1487,#1486);
++#1489=CARTESIAN_POINT('',(1.85E1,1.5E0,1.40625E1));
++#1490=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1491=DIRECTION('',(1.E0,0.E0,0.E0));
++#1492=AXIS2_PLACEMENT_3D('',#1489,#1490,#1491);
++#1494=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1495=VECTOR('',#1494,1.5E0);
++#1496=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));
++#1497=LINE('',#1496,#1495);
++#1498=CARTESIAN_POINT('',(1.85E1,0.E0,1.40625E1));
++#1499=DIRECTION('',(0.E0,1.E0,0.E0));
++#1500=DIRECTION('',(0.E0,0.E0,1.E0));
++#1501=AXIS2_PLACEMENT_3D('',#1498,#1499,#1500);
++#1503=DIRECTION('',(0.E0,1.E0,0.E0));
++#1504=VECTOR('',#1503,1.5E0);
++#1505=CARTESIAN_POINT('',(2.5E0,0.E0,1.40625E1));
++#1506=LINE('',#1505,#1504);
++#1507=CARTESIAN_POINT('',(5.5E0,0.E0,1.40625E1));
++#1508=DIRECTION('',(0.E0,1.E0,0.E0));
++#1509=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1510=AXIS2_PLACEMENT_3D('',#1507,#1508,#1509);
++#1512=DIRECTION('',(0.E0,1.E0,0.E0));
++#1513=VECTOR('',#1512,1.5E0);
++#1514=CARTESIAN_POINT('',(5.5E0,0.E0,1.70625E1));
++#1515=LINE('',#1514,#1513);
++#1516=CARTESIAN_POINT('',(5.5E0,1.5E0,1.40625E1));
++#1517=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1518=DIRECTION('',(0.E0,0.E0,1.E0));
++#1519=AXIS2_PLACEMENT_3D('',#1516,#1517,#1518);
++#1521=DIRECTION('',(0.E0,1.E0,0.E0));
++#1522=VECTOR('',#1521,1.5E0);
++#1523=CARTESIAN_POINT('',(2.15E1,0.E0,1.325E1));
++#1524=LINE('',#1523,#1522);
++#1525=CARTESIAN_POINT('',(2.05E1,0.E0,1.325E1));
++#1526=DIRECTION('',(0.E0,1.E0,0.E0));
++#1527=DIRECTION('',(1.E0,0.E0,0.E0));
++#1528=AXIS2_PLACEMENT_3D('',#1525,#1526,#1527);
++#1530=DIRECTION('',(0.E0,1.E0,0.E0));
++#1531=VECTOR('',#1530,1.5E0);
++#1532=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));
++#1533=LINE('',#1532,#1531);
++#1534=CARTESIAN_POINT('',(2.05E1,1.5E0,1.325E1));
++#1535=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1536=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1537=AXIS2_PLACEMENT_3D('',#1534,#1535,#1536);
++#1539=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1540=VECTOR('',#1539,1.5E0);
++#1541=CARTESIAN_POINT('',(2.4E1,1.5E0,1.325E1));
++#1542=LINE('',#1541,#1540);
++#1543=CARTESIAN_POINT('',(2.5E1,1.5E0,1.325E1));
++#1544=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1545=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1546=AXIS2_PLACEMENT_3D('',#1543,#1544,#1545);
++#1548=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1549=VECTOR('',#1548,1.5E0);
++#1550=CARTESIAN_POINT('',(2.5E1,1.5E0,1.225E1));
++#1551=LINE('',#1550,#1549);
++#1552=CARTESIAN_POINT('',(2.5E1,0.E0,1.325E1));
++#1553=DIRECTION('',(0.E0,1.E0,0.E0));
++#1554=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1555=AXIS2_PLACEMENT_3D('',#1552,#1553,#1554);
++#1557=DIRECTION('',(0.E0,1.E0,0.E0));
++#1558=VECTOR('',#1557,1.5E0);
++#1559=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));
++#1560=LINE('',#1559,#1558);
++#1561=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#1562=VECTOR('',#1561,5.656854249492E0);
++#1563=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));
++#1564=LINE('',#1563,#1562);
++#1565=DIRECTION('',(0.E0,1.E0,0.E0));
++#1566=VECTOR('',#1565,1.5E0);
++#1567=CARTESIAN_POINT('',(2.E1,0.E0,3.2E1));
++#1568=LINE('',#1567,#1566);
++#1569=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#1570=VECTOR('',#1569,5.656854249492E0);
++#1571=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));
++#1572=LINE('',#1571,#1570);
++#1573=DIRECTION('',(0.E0,1.E0,0.E0));
++#1574=VECTOR('',#1573,1.5E0);
++#1575=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));
++#1576=LINE('',#1575,#1574);
++#1577=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1578=VECTOR('',#1577,5.656854249492E0);
++#1579=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));
++#1580=LINE('',#1579,#1578);
++#1581=DIRECTION('',(0.E0,1.E0,0.E0));
++#1582=VECTOR('',#1581,1.5E0);
++#1583=CARTESIAN_POINT('',(0.E0,0.E0,2.8E1));
++#1584=LINE('',#1583,#1582);
++#1585=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1586=VECTOR('',#1585,5.656854249492E0);
++#1587=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));
++#1588=LINE('',#1587,#1586);
++#1589=DIRECTION('',(0.E0,1.E0,0.E0));
++#1590=VECTOR('',#1589,1.5E0);
++#1591=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));
++#1592=LINE('',#1591,#1590);
++#1593=CARTESIAN_POINT('',(2.5E1,0.E0,7.E0));
++#1594=DIRECTION('',(0.E0,1.E0,0.E0));
++#1595=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1596=AXIS2_PLACEMENT_3D('',#1593,#1594,#1595);
++#1598=DIRECTION('',(0.E0,1.E0,0.E0));
++#1599=VECTOR('',#1598,1.5E0);
++#1600=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));
++#1601=LINE('',#1600,#1599);
++#1602=CARTESIAN_POINT('',(2.5E1,1.5E0,7.E0));
++#1603=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1604=DIRECTION('',(0.E0,0.E0,1.E0));
++#1605=AXIS2_PLACEMENT_3D('',#1602,#1603,#1604);
++#1607=DIRECTION('',(0.E0,1.E0,0.E0));
++#1608=VECTOR('',#1607,1.5E0);
++#1609=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));
++#1610=LINE('',#1609,#1608);
++#1611=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#1612=VECTOR('',#1611,5.656854249492E0);
++#1613=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));
++#1614=LINE('',#1613,#1612);
++#1615=DIRECTION('',(0.E0,1.E0,0.E0));
++#1616=VECTOR('',#1615,1.5E0);
++#1617=CARTESIAN_POINT('',(2.4E1,0.E0,4.E0));
++#1618=LINE('',#1617,#1616);
++#1619=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#1620=VECTOR('',#1619,5.656854249492E0);
++#1621=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));
++#1622=LINE('',#1621,#1620);
++#1623=DIRECTION('',(0.E0,1.E0,0.E0));
++#1624=VECTOR('',#1623,1.5E0);
++#1625=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
++#1626=LINE('',#1625,#1624);
++#1627=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1628=VECTOR('',#1627,5.656854249492E0);
++#1629=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
++#1630=LINE('',#1629,#1628);
++#1631=DIRECTION('',(0.E0,1.E0,0.E0));
++#1632=VECTOR('',#1631,1.5E0);
++#1633=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));
++#1634=LINE('',#1633,#1632);
++#1635=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1636=VECTOR('',#1635,5.656854249492E0);
++#1637=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));
++#1638=LINE('',#1637,#1636);
++#1639=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1640=VECTOR('',#1639,1.5E0);
++#1641=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));
++#1642=LINE('',#1641,#1640);
++#1643=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1644=VECTOR('',#1643,7.071067811865E-1);
++#1645=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));
++#1646=LINE('',#1645,#1644);
++#1647=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1648=VECTOR('',#1647,1.5E0);
++#1649=CARTESIAN_POINT('',(2.6E1,1.5E0,1.175E1));
++#1650=LINE('',#1649,#1648);
++#1651=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1652=VECTOR('',#1651,7.071067811865E-1);
++#1653=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));
++#1654=LINE('',#1653,#1652);
++#1655=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1656=VECTOR('',#1655,2.5E0);
++#1657=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));
++#1658=LINE('',#1657,#1656);
++#1659=DIRECTION('',(0.E0,0.E0,1.E0));
++#1660=VECTOR('',#1659,2.E0);
++#1661=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));
++#1662=LINE('',#1661,#1660);
++#1663=DIRECTION('',(0.E0,0.E0,1.E0));
++#1664=VECTOR('',#1663,2.E0);
++#1665=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));
++#1666=LINE('',#1665,#1664);
++#1667=DIRECTION('',(0.E0,0.E0,1.E0));
++#1668=VECTOR('',#1667,2.E0);
++#1669=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));
++#1670=LINE('',#1669,#1668);
++#1671=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));
++#1672=DIRECTION('',(0.E0,1.E0,0.E0));
++#1673=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1674=AXIS2_PLACEMENT_3D('',#1671,#1672,#1673);
++#1676=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));
++#1677=DIRECTION('',(0.E0,1.E0,0.E0));
++#1678=DIRECTION('',(1.E0,0.E0,0.E0));
++#1679=AXIS2_PLACEMENT_3D('',#1676,#1677,#1678);
++#1681=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));
++#1682=DIRECTION('',(0.E0,1.E0,0.E0));
++#1683=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1684=AXIS2_PLACEMENT_3D('',#1681,#1682,#1683);
++#1686=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));
++#1687=DIRECTION('',(0.E0,1.E0,0.E0));
++#1688=DIRECTION('',(1.E0,0.E0,0.E0));
++#1689=AXIS2_PLACEMENT_3D('',#1686,#1687,#1688);
++#1691=DIRECTION('',(0.E0,0.E0,1.E0));
++#1692=VECTOR('',#1691,2.E0);
++#1693=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));
++#1694=LINE('',#1693,#1692);
++#1695=DIRECTION('',(0.E0,1.E0,0.E0));
++#1696=VECTOR('',#1695,1.E1);
++#1697=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));
++#1698=LINE('',#1697,#1696);
++#1699=DIRECTION('',(0.E0,1.E0,0.E0));
++#1700=VECTOR('',#1699,1.5E0);
++#1701=CARTESIAN_POINT('',(1.9E1,0.E0,1.1E1));
++#1702=LINE('',#1701,#1700);
++#1703=CARTESIAN_POINT('',(1.8E1,0.E0,1.1E1));
++#1704=DIRECTION('',(0.E0,1.E0,0.E0));
++#1705=DIRECTION('',(1.E0,0.E0,0.E0));
++#1706=AXIS2_PLACEMENT_3D('',#1703,#1704,#1705);
++#1708=DIRECTION('',(0.E0,1.E0,0.E0));
++#1709=VECTOR('',#1708,1.5E0);
++#1710=CARTESIAN_POINT('',(1.8E1,0.E0,1.E1));
++#1711=LINE('',#1710,#1709);
++#1712=CARTESIAN_POINT('',(1.8E1,1.5E0,1.1E1));
++#1713=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1714=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1715=AXIS2_PLACEMENT_3D('',#1712,#1713,#1714);
++#1717=DIRECTION('',(1.E0,0.E0,0.E0));
++#1718=VECTOR('',#1717,1.2E1);
++#1719=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));
++#1720=LINE('',#1719,#1718);
++#1721=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1722=VECTOR('',#1721,1.5E0);
++#1723=CARTESIAN_POINT('',(5.E0,1.5E0,1.1E1));
++#1724=LINE('',#1723,#1722);
++#1725=CARTESIAN_POINT('',(6.E0,1.5E0,1.1E1));
++#1726=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1727=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1728=AXIS2_PLACEMENT_3D('',#1725,#1726,#1727);
++#1730=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1731=VECTOR('',#1730,1.5E0);
++#1732=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));
++#1733=LINE('',#1732,#1731);
++#1734=CARTESIAN_POINT('',(6.E0,0.E0,1.1E1));
++#1735=DIRECTION('',(0.E0,1.E0,0.E0));
++#1736=DIRECTION('',(0.E0,0.E0,-1.E0));
++#1737=AXIS2_PLACEMENT_3D('',#1734,#1735,#1736);
++#1739=DIRECTION('',(0.E0,0.E0,1.E0));
++#1740=VECTOR('',#1739,2.E0);
++#1741=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));
++#1742=LINE('',#1741,#1740);
++#1743=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1744=VECTOR('',#1743,1.E1);
++#1745=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));
++#1746=LINE('',#1745,#1744);
++#1747=DIRECTION('',(0.E0,1.E0,0.E0));
++#1748=VECTOR('',#1747,1.5E0);
++#1749=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));
++#1750=LINE('',#1749,#1748);
++#1751=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#1752=VECTOR('',#1751,7.071067811865E-1);
++#1753=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));
++#1754=LINE('',#1753,#1752);
++#1755=DIRECTION('',(0.E0,1.E0,0.E0));
++#1756=VECTOR('',#1755,1.5E0);
++#1757=CARTESIAN_POINT('',(4.5E0,0.E0,1.225E1));
++#1758=LINE('',#1757,#1756);
++#1759=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#1760=VECTOR('',#1759,7.071067811865E-1);
++#1761=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));
++#1762=LINE('',#1761,#1760);
++#1763=CARTESIAN_POINT('',(4.25E0,1.05E1,1.E1));
++#1764=DIRECTION('',(0.E0,0.E0,1.E0));
++#1765=DIRECTION('',(1.E0,0.E0,0.E0));
++#1766=AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);
++#1768=CARTESIAN_POINT('',(4.25E0,1.05E1,1.E1));
++#1769=DIRECTION('',(0.E0,0.E0,1.E0));
++#1770=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1771=AXIS2_PLACEMENT_3D('',#1768,#1769,#1770);
++#1773=DIRECTION('',(0.E0,1.E0,0.E0));
++#1774=VECTOR('',#1773,5.E0);
++#1775=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.E1));
++#1776=LINE('',#1775,#1774);
++#1777=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1778=VECTOR('',#1777,1.E0);
++#1779=CARTESIAN_POINT('',(-2.E0,2.5E0,1.E1));
++#1780=LINE('',#1779,#1778);
++#1781=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#1782=VECTOR('',#1781,1.029563014099E1);
++#1783=CARTESIAN_POINT('',(3.E0,1.15E1,1.E1));
++#1784=LINE('',#1783,#1782);
++#1785=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1786=VECTOR('',#1785,2.E0);
++#1787=CARTESIAN_POINT('',(5.E0,1.15E1,1.E1));
++#1788=LINE('',#1787,#1786);
++#1789=DIRECTION('',(0.E0,1.E0,0.E0));
++#1790=VECTOR('',#1789,1.E1);
++#1791=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));
++#1792=LINE('',#1791,#1790);
++#1793=DIRECTION('',(0.E0,1.E0,0.E0));
++#1794=VECTOR('',#1793,5.E0);
++#1795=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));
++#1796=LINE('',#1795,#1794);
++#1797=DIRECTION('',(1.E0,0.E0,0.E0));
++#1798=VECTOR('',#1797,1.75E0);
++#1799=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));
++#1800=LINE('',#1799,#1798);
++#1801=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1802=VECTOR('',#1801,4.3E0);
++#1803=CARTESIAN_POINT('',(2.5E0,6.65E0,1.E1));
++#1804=LINE('',#1803,#1802);
++#1805=DIRECTION('',(1.E0,0.E0,0.E0));
++#1806=VECTOR('',#1805,1.3E0);
++#1807=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));
++#1808=LINE('',#1807,#1806);
++#1809=DIRECTION('',(0.E0,1.E0,0.E0));
++#1810=VECTOR('',#1809,6.8E0);
++#1811=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));
++#1812=LINE('',#1811,#1810);
++#1813=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1814=VECTOR('',#1813,1.197200760546E0);
++#1815=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));
++#1816=LINE('',#1815,#1814);
++#1817=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#1818=VECTOR('',#1817,2.059126028197E0);
++#1819=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));
++#1820=LINE('',#1819,#1818);
++#1821=DIRECTION('',(1.E0,0.E0,0.E0));
++#1822=VECTOR('',#1821,1.972007605460E-1);
++#1823=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));
++#1824=LINE('',#1823,#1822);
++#1825=DIRECTION('',(0.E0,0.E0,1.E0));
++#1826=VECTOR('',#1825,2.E0);
++#1827=CARTESIAN_POINT('',(4.4125E0,1.05E1,8.E0));
++#1828=LINE('',#1827,#1826);
++#1829=DIRECTION('',(0.E0,0.E0,1.E0));
++#1830=VECTOR('',#1829,2.E0);
++#1831=CARTESIAN_POINT('',(4.0875E0,1.05E1,8.E0));
++#1832=LINE('',#1831,#1830);
++#1833=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#1834=VECTOR('',#1833,5.773502691896E0);
++#1835=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));
++#1836=LINE('',#1835,#1834);
++#1837=CARTESIAN_POINT('',(8.675E-1,3.035898384862E0,1.2E1));
++#1838=CARTESIAN_POINT('',(8.675E-1,2.930774450068E0,1.206069333205E1));
++#1839=CARTESIAN_POINT('',(9.058386382037E-1,2.745461691651E0,1.216768370301E1));
++#1840=CARTESIAN_POINT('',(1.029862281194E0,2.608885438662E0,1.224653603944E1));
++#1841=CARTESIAN_POINT('',(1.125E0,2.580400233539E0,1.226298198028E1));
++#1842=CARTESIAN_POINT('',(1.220137718806E0,2.608885438662E0,1.224653603944E1));
++#1843=CARTESIAN_POINT('',(1.344161361796E0,2.745461691651E0,1.216768370301E1));
++#1844=CARTESIAN_POINT('',(1.3825E0,2.930774450068E0,1.206069333205E1));
++#1845=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));
++#1847=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));
++#1848=CARTESIAN_POINT('',(1.3825E0,3.141022319657E0,1.193930666795E1));
++#1849=CARTESIAN_POINT('',(1.344161361796E0,3.326335078073E0,1.183231629699E1));
++#1850=CARTESIAN_POINT('',(1.220137718806E0,3.462911331062E0,1.175346396056E1));
++#1851=CARTESIAN_POINT('',(1.125E0,3.491396536186E0,1.173701801972E1));
++#1852=CARTESIAN_POINT('',(1.029862281194E0,3.462911331062E0,1.175346396056E1));
++#1853=CARTESIAN_POINT('',(9.058386382037E-1,3.326335078073E0,1.183231629699E1));
++#1854=CARTESIAN_POINT('',(8.675E-1,3.141022319657E0,1.193930666795E1));
++#1855=CARTESIAN_POINT('',(8.675E-1,3.035898384862E0,1.2E1));
++#1857=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#1858=VECTOR('',#1857,5.773502691896E0);
++#1859=CARTESIAN_POINT('',(2.E0,6.5E0,1.E1));
++#1860=LINE('',#1859,#1858);
++#1861=DIRECTION('',(0.E0,1.E0,0.E0));
++#1862=VECTOR('',#1861,2.035898384862E0);
++#1863=CARTESIAN_POINT('',(8.675E-1,1.E0,1.2E1));
++#1864=LINE('',#1863,#1862);
++#1865=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1866=VECTOR('',#1865,2.035898384862E0);
++#1867=CARTESIAN_POINT('',(1.3825E0,3.035898384862E0,1.2E1));
++#1868=LINE('',#1867,#1866);
++#1869=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));
++#1870=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1871=DIRECTION('',(1.E0,0.E0,0.E0));
++#1872=AXIS2_PLACEMENT_3D('',#1869,#1870,#1871);
++#1874=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));
++#1875=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1876=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1877=AXIS2_PLACEMENT_3D('',#1874,#1875,#1876);
++#1879=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));
++#1880=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1881=DIRECTION('',(1.E0,0.E0,0.E0));
++#1882=AXIS2_PLACEMENT_3D('',#1879,#1880,#1881);
++#1884=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));
++#1885=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1886=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1887=AXIS2_PLACEMENT_3D('',#1884,#1885,#1886);
++#1889=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1890=VECTOR('',#1889,1.E0);
++#1891=CARTESIAN_POINT('',(1.3175E0,1.E0,1.2E1));
++#1892=LINE('',#1891,#1890);
++#1893=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1894=VECTOR('',#1893,1.E0);
++#1895=CARTESIAN_POINT('',(9.325E-1,1.E0,1.2E1));
++#1896=LINE('',#1895,#1894);
++#1897=DIRECTION('',(0.E0,1.E0,0.E0));
++#1898=VECTOR('',#1897,2.5E0);
++#1899=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));
++#1900=LINE('',#1899,#1898);
++#1901=DIRECTION('',(0.E0,0.E0,1.E0));
++#1902=VECTOR('',#1901,2.E0);
++#1903=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));
++#1904=LINE('',#1903,#1902);
++#1905=DIRECTION('',(0.E0,1.E0,0.E0));
++#1906=VECTOR('',#1905,1.5E0);
++#1907=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));
++#1908=LINE('',#1907,#1906);
++#1909=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1910=VECTOR('',#1909,7.071067811865E-1);
++#1911=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));
++#1912=LINE('',#1911,#1910);
++#1913=DIRECTION('',(0.E0,1.E0,0.E0));
++#1914=VECTOR('',#1913,1.5E0);
++#1915=CARTESIAN_POINT('',(-2.E0,0.E0,1.175E1));
++#1916=LINE('',#1915,#1914);
++#1917=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#1918=VECTOR('',#1917,7.071067811865E-1);
++#1919=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));
++#1920=LINE('',#1919,#1918);
++#1921=DIRECTION('',(0.E0,0.E0,1.E0));
++#1922=VECTOR('',#1921,2.E0);
++#1923=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));
++#1924=LINE('',#1923,#1922);
++#1925=DIRECTION('',(0.E0,0.E0,1.E0));
++#1926=VECTOR('',#1925,2.E0);
++#1927=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));
++#1928=LINE('',#1927,#1926);
++#1929=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));
++#1930=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1931=DIRECTION('',(1.E0,0.E0,0.E0));
++#1932=AXIS2_PLACEMENT_3D('',#1929,#1930,#1931);
++#1934=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));
++#1935=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1936=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1937=AXIS2_PLACEMENT_3D('',#1934,#1935,#1936);
++#1939=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));
++#1940=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1941=DIRECTION('',(1.E0,0.E0,0.E0));
++#1942=AXIS2_PLACEMENT_3D('',#1939,#1940,#1941);
++#1944=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));
++#1945=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1946=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1947=AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);
++#1949=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1950=VECTOR('',#1949,3.75E-1);
++#1951=CARTESIAN_POINT('',(4.095E0,1.15E1,9.E0));
++#1952=LINE('',#1951,#1950);
++#1953=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1954=VECTOR('',#1953,3.75E-1);
++#1955=CARTESIAN_POINT('',(3.905E0,1.15E1,9.E0));
++#1956=LINE('',#1955,#1954);
++#1957=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));
++#1958=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1959=DIRECTION('',(1.E0,0.E0,0.E0));
++#1960=AXIS2_PLACEMENT_3D('',#1957,#1958,#1959);
++#1962=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));
++#1963=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1964=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1965=AXIS2_PLACEMENT_3D('',#1962,#1963,#1964);
++#1967=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1968=VECTOR('',#1967,2.5E-1);
++#1969=CARTESIAN_POINT('',(3.929917478528E0,1.15E1,9.132582521472E0));
++#1970=LINE('',#1969,#1968);
++#1971=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1972=VECTOR('',#1971,2.5E-1);
++#1973=CARTESIAN_POINT('',(3.804917478528E0,1.15E1,9.132582521472E0));
++#1974=LINE('',#1973,#1972);
++#1975=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));
++#1976=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1977=DIRECTION('',(1.E0,0.E0,0.E0));
++#1978=AXIS2_PLACEMENT_3D('',#1975,#1976,#1977);
++#1980=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));
++#1981=DIRECTION('',(0.E0,-1.E0,0.E0));
++#1982=DIRECTION('',(-1.E0,0.E0,0.E0));
++#1983=AXIS2_PLACEMENT_3D('',#1980,#1981,#1982);
++#1985=DIRECTION('',(0.E0,0.E0,1.E0));
++#1986=VECTOR('',#1985,5.E-1);
++#1987=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));
++#1988=LINE('',#1987,#1986);
++#1989=CARTESIAN_POINT('',(2.15E0,6.65E0,1.E1));
++#1990=DIRECTION('',(0.E0,0.E0,1.E0));
++#1991=DIRECTION('',(1.E0,0.E0,0.E0));
++#1992=AXIS2_PLACEMENT_3D('',#1989,#1990,#1991);
++#1994=DIRECTION('',(0.E0,0.E0,1.E0));
++#1995=VECTOR('',#1994,5.E-1);
++#1996=CARTESIAN_POINT('',(2.15E0,7.E0,9.5E0));
++#1997=LINE('',#1996,#1995);
++#1998=CARTESIAN_POINT('',(2.15E0,6.65E0,9.5E0));
++#1999=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2000=DIRECTION('',(0.E0,1.E0,0.E0));
++#2001=AXIS2_PLACEMENT_3D('',#1998,#1999,#2000);
++#2003=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2004=VECTOR('',#2003,4.3E0);
++#2005=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));
++#2006=LINE('',#2005,#2004);
++#2007=DIRECTION('',(1.E0,0.E0,0.E0));
++#2008=VECTOR('',#2007,1.972007605460E-1);
++#2009=CARTESIAN_POINT('',(1.952799239454E0,7.E0,9.5E0));
++#2010=LINE('',#2009,#2008);
++#2011=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#2012=VECTOR('',#2011,2.059126028197E0);
++#2013=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,9.5E0));
++#2014=LINE('',#2013,#2012);
++#2015=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2016=VECTOR('',#2015,1.197200760546E0);
++#2017=CARTESIAN_POINT('',(4.15E0,9.5E0,9.5E0));
++#2018=LINE('',#2017,#2016);
++#2019=DIRECTION('',(0.E0,1.E0,0.E0));
++#2020=VECTOR('',#2019,6.8E0);
++#2021=CARTESIAN_POINT('',(4.5E0,2.35E0,9.5E0));
++#2022=LINE('',#2021,#2020);
++#2023=DIRECTION('',(1.E0,0.E0,0.E0));
++#2024=VECTOR('',#2023,1.3E0);
++#2025=CARTESIAN_POINT('',(2.85E0,2.E0,9.5E0));
++#2026=LINE('',#2025,#2024);
++#2027=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2028=VECTOR('',#2027,5.E-1);
++#2029=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));
++#2030=LINE('',#2029,#2028);
++#2031=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,1.E1));
++#2032=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2033=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2034=AXIS2_PLACEMENT_3D('',#2031,#2032,#2033);
++#2036=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2037=VECTOR('',#2036,5.E-1);
++#2038=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,1.E1));
++#2039=LINE('',#2038,#2037);
++#2040=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,9.5E0));
++#2041=DIRECTION('',(0.E0,0.E0,1.E0));
++#2042=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#2043=AXIS2_PLACEMENT_3D('',#2040,#2041,#2042);
++#2045=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2046=VECTOR('',#2045,5.E-1);
++#2047=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));
++#2048=LINE('',#2047,#2046);
++#2049=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,1.E1));
++#2050=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2051=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#2052=AXIS2_PLACEMENT_3D('',#2049,#2050,#2051);
++#2054=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2055=VECTOR('',#2054,5.E-1);
++#2056=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,1.E1));
++#2057=LINE('',#2056,#2055);
++#2058=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,9.5E0));
++#2059=DIRECTION('',(0.E0,0.E0,1.E0));
++#2060=DIRECTION('',(0.E0,1.E0,0.E0));
++#2061=AXIS2_PLACEMENT_3D('',#2058,#2059,#2060);
++#2063=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2064=VECTOR('',#2063,5.E-1);
++#2065=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));
++#2066=LINE('',#2065,#2064);
++#2067=CARTESIAN_POINT('',(4.15E0,9.15E0,1.E1));
++#2068=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2069=DIRECTION('',(0.E0,1.E0,0.E0));
++#2070=AXIS2_PLACEMENT_3D('',#2067,#2068,#2069);
++#2072=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2073=VECTOR('',#2072,5.E-1);
++#2074=CARTESIAN_POINT('',(4.5E0,9.15E0,1.E1));
++#2075=LINE('',#2074,#2073);
++#2076=CARTESIAN_POINT('',(4.15E0,9.15E0,9.5E0));
++#2077=DIRECTION('',(0.E0,0.E0,1.E0));
++#2078=DIRECTION('',(1.E0,0.E0,0.E0));
++#2079=AXIS2_PLACEMENT_3D('',#2076,#2077,#2078);
++#2081=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2082=VECTOR('',#2081,5.E-1);
++#2083=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));
++#2084=LINE('',#2083,#2082);
++#2085=CARTESIAN_POINT('',(4.15E0,2.35E0,1.E1));
++#2086=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2087=DIRECTION('',(1.E0,0.E0,0.E0));
++#2088=AXIS2_PLACEMENT_3D('',#2085,#2086,#2087);
++#2090=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2091=VECTOR('',#2090,5.E-1);
++#2092=CARTESIAN_POINT('',(4.15E0,2.E0,1.E1));
++#2093=LINE('',#2092,#2091);
++#2094=CARTESIAN_POINT('',(4.15E0,2.35E0,9.5E0));
++#2095=DIRECTION('',(0.E0,0.E0,1.E0));
++#2096=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2097=AXIS2_PLACEMENT_3D('',#2094,#2095,#2096);
++#2099=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2100=VECTOR('',#2099,5.E-1);
++#2101=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));
++#2102=LINE('',#2101,#2100);
++#2103=CARTESIAN_POINT('',(2.85E0,2.35E0,1.E1));
++#2104=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2105=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2106=AXIS2_PLACEMENT_3D('',#2103,#2104,#2105);
++#2108=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2109=VECTOR('',#2108,5.E-1);
++#2110=CARTESIAN_POINT('',(2.5E0,2.35E0,1.E1));
++#2111=LINE('',#2110,#2109);
++#2112=CARTESIAN_POINT('',(2.85E0,2.35E0,9.5E0));
++#2113=DIRECTION('',(0.E0,0.E0,1.E0));
++#2114=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2115=AXIS2_PLACEMENT_3D('',#2112,#2113,#2114);
++#2117=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2118=VECTOR('',#2117,1.5E0);
++#2119=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));
++#2120=LINE('',#2119,#2118);
++#2121=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#2122=VECTOR('',#2121,7.071067811865E-1);
++#2123=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));
++#2124=LINE('',#2123,#2122);
++#2125=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2126=VECTOR('',#2125,1.5E0);
++#2127=CARTESIAN_POINT('',(1.95E1,1.5E0,1.225E1));
++#2128=LINE('',#2127,#2126);
++#2129=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#2130=VECTOR('',#2129,7.071067811865E-1);
++#2131=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));
++#2132=LINE('',#2131,#2130);
++#2133=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2134=VECTOR('',#2133,3.75E-1);
++#2135=CARTESIAN_POINT('',(1.9905E1,1.15E1,9.E0));
++#2136=LINE('',#2135,#2134);
++#2137=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2138=VECTOR('',#2137,3.75E-1);
++#2139=CARTESIAN_POINT('',(2.0095E1,1.15E1,9.E0));
++#2140=LINE('',#2139,#2138);
++#2141=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));
++#2142=DIRECTION('',(0.E0,1.E0,0.E0));
++#2143=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2144=AXIS2_PLACEMENT_3D('',#2141,#2142,#2143);
++#2146=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));
++#2147=DIRECTION('',(0.E0,1.E0,0.E0));
++#2148=DIRECTION('',(1.E0,0.E0,0.E0));
++#2149=AXIS2_PLACEMENT_3D('',#2146,#2147,#2148);
++#2151=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2152=VECTOR('',#2151,2.5E-1);
++#2153=CARTESIAN_POINT('',(2.007008252147E1,1.15E1,9.132582521472E0));
++#2154=LINE('',#2153,#2152);
++#2155=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2156=VECTOR('',#2155,2.5E-1);
++#2157=CARTESIAN_POINT('',(2.019508252147E1,1.15E1,9.132582521472E0));
++#2158=LINE('',#2157,#2156);
++#2159=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));
++#2160=DIRECTION('',(0.E0,1.E0,0.E0));
++#2161=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2162=AXIS2_PLACEMENT_3D('',#2159,#2160,#2161);
++#2164=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));
++#2165=DIRECTION('',(0.E0,1.E0,0.E0));
++#2166=DIRECTION('',(1.E0,0.E0,0.E0));
++#2167=AXIS2_PLACEMENT_3D('',#2164,#2165,#2166);
++#2169=DIRECTION('',(1.421085471520E-14,1.E0,0.E0));
++#2170=VECTOR('',#2169,2.5E-1);
++#2171=CARTESIAN_POINT('',(1.745E1,1.25E0,2.975E1));
++#2172=LINE('',#2171,#2170);
++#2173=DIRECTION('',(-1.421085471520E-14,1.E0,0.E0));
++#2174=VECTOR('',#2173,2.5E-1);
++#2175=CARTESIAN_POINT('',(1.765E1,1.25E0,2.975E1));
++#2176=LINE('',#2175,#2174);
++#2177=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
++#2178=VECTOR('',#2177,1.154700538379E-1);
++#2179=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));
++#2180=LINE('',#2179,#2178);
++#2181=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
++#2182=VECTOR('',#2181,1.154700538379E-1);
++#2183=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));
++#2184=LINE('',#2183,#2182);
++#2185=CARTESIAN_POINT('',(1.755E1,1.25E0,2.975E1));
++#2186=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2187=DIRECTION('',(1.E0,0.E0,0.E0));
++#2188=AXIS2_PLACEMENT_3D('',#2185,#2186,#2187);
++#2190=CARTESIAN_POINT('',(1.755E1,1.25E0,2.975E1));
++#2191=DIRECTION('',(0.E0,1.E0,0.E0));
++#2192=DIRECTION('',(1.E0,0.E0,0.E0));
++#2193=AXIS2_PLACEMENT_3D('',#2190,#2191,#2192);
++#2195=DIRECTION('',(1.421085471520E-14,1.E0,0.E0));
++#2196=VECTOR('',#2195,2.5E-1);
++#2197=CARTESIAN_POINT('',(1.645E1,1.25E0,2.975E1));
++#2198=LINE('',#2197,#2196);
++#2199=DIRECTION('',(-1.421085471520E-14,1.E0,0.E0));
++#2200=VECTOR('',#2199,2.5E-1);
++#2201=CARTESIAN_POINT('',(1.665E1,1.25E0,2.975E1));
++#2202=LINE('',#2201,#2200);
++#2203=DIRECTION('',(-8.660254037844E-1,5.E-1,0.E0));
++#2204=VECTOR('',#2203,1.154700538379E-1);
++#2205=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));
++#2206=LINE('',#2205,#2204);
++#2207=DIRECTION('',(8.660254037844E-1,5.E-1,0.E0));
++#2208=VECTOR('',#2207,1.154700538379E-1);
++#2209=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));
++#2210=LINE('',#2209,#2208);
++#2211=CARTESIAN_POINT('',(1.655E1,1.25E0,2.975E1));
++#2212=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2213=DIRECTION('',(1.E0,0.E0,0.E0));
++#2214=AXIS2_PLACEMENT_3D('',#2211,#2212,#2213);
++#2216=CARTESIAN_POINT('',(1.655E1,1.25E0,2.975E1));
++#2217=DIRECTION('',(0.E0,1.E0,0.E0));
++#2218=DIRECTION('',(1.E0,0.E0,0.E0));
++#2219=AXIS2_PLACEMENT_3D('',#2216,#2217,#2218);
++#2221=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2222=VECTOR('',#2221,5.E-1);
++#2223=CARTESIAN_POINT('',(1.3825E0,1.5E0,6.E0));
++#2224=LINE('',#2223,#2222);
++#2225=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2226=VECTOR('',#2225,5.E-1);
++#2227=CARTESIAN_POINT('',(8.675E-1,1.5E0,6.E0));
++#2228=LINE('',#2227,#2226);
++#2229=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));
++#2230=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2231=DIRECTION('',(1.E0,0.E0,0.E0));
++#2232=AXIS2_PLACEMENT_3D('',#2229,#2230,#2231);
++#2234=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));
++#2235=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2236=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2237=AXIS2_PLACEMENT_3D('',#2234,#2235,#2236);
++#2239=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));
++#2240=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2241=DIRECTION('',(1.E0,0.E0,0.E0));
++#2242=AXIS2_PLACEMENT_3D('',#2239,#2240,#2241);
++#2244=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));
++#2245=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2246=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2247=AXIS2_PLACEMENT_3D('',#2244,#2245,#2246);
++#2249=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2250=VECTOR('',#2249,1.E0);
++#2251=CARTESIAN_POINT('',(1.3175E0,1.E0,6.E0));
++#2252=LINE('',#2251,#2250);
++#2253=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2254=VECTOR('',#2253,1.E0);
++#2255=CARTESIAN_POINT('',(9.325E-1,1.E0,6.E0));
++#2256=LINE('',#2255,#2254);
++#2257=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2258=VECTOR('',#2257,5.E-1);
++#2259=CARTESIAN_POINT('',(1.3825E0,1.5E0,1.8E1));
++#2260=LINE('',#2259,#2258);
++#2261=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2262=VECTOR('',#2261,5.E-1);
++#2263=CARTESIAN_POINT('',(8.675E-1,1.5E0,1.8E1));
++#2264=LINE('',#2263,#2262);
++#2265=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));
++#2266=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2267=DIRECTION('',(1.E0,0.E0,0.E0));
++#2268=AXIS2_PLACEMENT_3D('',#2265,#2266,#2267);
++#2270=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));
++#2271=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2272=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2273=AXIS2_PLACEMENT_3D('',#2270,#2271,#2272);
++#2275=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));
++#2276=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2277=DIRECTION('',(1.E0,0.E0,0.E0));
++#2278=AXIS2_PLACEMENT_3D('',#2275,#2276,#2277);
++#2280=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));
++#2281=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2282=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2283=AXIS2_PLACEMENT_3D('',#2280,#2281,#2282);
++#2285=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2286=VECTOR('',#2285,1.E0);
++#2287=CARTESIAN_POINT('',(1.3175E0,1.E0,1.8E1));
++#2288=LINE('',#2287,#2286);
++#2289=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2290=VECTOR('',#2289,1.E0);
++#2291=CARTESIAN_POINT('',(9.325E-1,1.E0,1.8E1));
++#2292=LINE('',#2291,#2290);
++#2293=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2294=VECTOR('',#2293,5.E-1);
++#2295=CARTESIAN_POINT('',(1.3825E0,1.5E0,2.4E1));
++#2296=LINE('',#2295,#2294);
++#2297=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2298=VECTOR('',#2297,5.E-1);
++#2299=CARTESIAN_POINT('',(8.675E-1,1.5E0,2.4E1));
++#2300=LINE('',#2299,#2298);
++#2301=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));
++#2302=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2303=DIRECTION('',(1.E0,0.E0,0.E0));
++#2304=AXIS2_PLACEMENT_3D('',#2301,#2302,#2303);
++#2306=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));
++#2307=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2308=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2309=AXIS2_PLACEMENT_3D('',#2306,#2307,#2308);
++#2311=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));
++#2312=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2313=DIRECTION('',(1.E0,0.E0,0.E0));
++#2314=AXIS2_PLACEMENT_3D('',#2311,#2312,#2313);
++#2316=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));
++#2317=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2318=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2319=AXIS2_PLACEMENT_3D('',#2316,#2317,#2318);
++#2321=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2322=VECTOR('',#2321,1.E0);
++#2323=CARTESIAN_POINT('',(1.3175E0,1.E0,2.4E1));
++#2324=LINE('',#2323,#2322);
++#2325=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2326=VECTOR('',#2325,1.E0);
++#2327=CARTESIAN_POINT('',(9.325E-1,1.E0,2.4E1));
++#2328=LINE('',#2327,#2326);
++#2329=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2330=VECTOR('',#2329,5.E-1);
++#2331=CARTESIAN_POINT('',(2.31325E1,1.5E0,6.E0));
++#2332=LINE('',#2331,#2330);
++#2333=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2334=VECTOR('',#2333,5.E-1);
++#2335=CARTESIAN_POINT('',(2.26175E1,1.5E0,6.E0));
++#2336=LINE('',#2335,#2334);
++#2337=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));
++#2338=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2339=DIRECTION('',(1.E0,0.E0,0.E0));
++#2340=AXIS2_PLACEMENT_3D('',#2337,#2338,#2339);
++#2342=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));
++#2343=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2344=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2345=AXIS2_PLACEMENT_3D('',#2342,#2343,#2344);
++#2347=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));
++#2348=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2349=DIRECTION('',(1.E0,0.E0,0.E0));
++#2350=AXIS2_PLACEMENT_3D('',#2347,#2348,#2349);
++#2352=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));
++#2353=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2354=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2355=AXIS2_PLACEMENT_3D('',#2352,#2353,#2354);
++#2357=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2358=VECTOR('',#2357,1.E0);
++#2359=CARTESIAN_POINT('',(2.30675E1,1.E0,6.E0));
++#2360=LINE('',#2359,#2358);
++#2361=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2362=VECTOR('',#2361,1.E0);
++#2363=CARTESIAN_POINT('',(2.26825E1,1.E0,6.E0));
++#2364=LINE('',#2363,#2362);
++#2365=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2366=VECTOR('',#2365,5.E-1);
++#2367=CARTESIAN_POINT('',(2.31325E1,1.5E0,1.8E1));
++#2368=LINE('',#2367,#2366);
++#2369=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2370=VECTOR('',#2369,5.E-1);
++#2371=CARTESIAN_POINT('',(2.26175E1,1.5E0,1.8E1));
++#2372=LINE('',#2371,#2370);
++#2373=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));
++#2374=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2375=DIRECTION('',(1.E0,0.E0,0.E0));
++#2376=AXIS2_PLACEMENT_3D('',#2373,#2374,#2375);
++#2378=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));
++#2379=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2380=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2381=AXIS2_PLACEMENT_3D('',#2378,#2379,#2380);
++#2383=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));
++#2384=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2385=DIRECTION('',(1.E0,0.E0,0.E0));
++#2386=AXIS2_PLACEMENT_3D('',#2383,#2384,#2385);
++#2388=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));
++#2389=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2390=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2391=AXIS2_PLACEMENT_3D('',#2388,#2389,#2390);
++#2393=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2394=VECTOR('',#2393,1.E0);
++#2395=CARTESIAN_POINT('',(2.30675E1,1.E0,1.8E1));
++#2396=LINE('',#2395,#2394);
++#2397=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2398=VECTOR('',#2397,1.E0);
++#2399=CARTESIAN_POINT('',(2.26825E1,1.E0,1.8E1));
++#2400=LINE('',#2399,#2398);
++#2401=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2402=VECTOR('',#2401,5.E-1);
++#2403=CARTESIAN_POINT('',(2.31325E1,1.5E0,2.4E1));
++#2404=LINE('',#2403,#2402);
++#2405=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2406=VECTOR('',#2405,5.E-1);
++#2407=CARTESIAN_POINT('',(2.26175E1,1.5E0,2.4E1));
++#2408=LINE('',#2407,#2406);
++#2409=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));
++#2410=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2411=DIRECTION('',(1.E0,0.E0,0.E0));
++#2412=AXIS2_PLACEMENT_3D('',#2409,#2410,#2411);
++#2414=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));
++#2415=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2416=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2417=AXIS2_PLACEMENT_3D('',#2414,#2415,#2416);
++#2419=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));
++#2420=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2421=DIRECTION('',(1.E0,0.E0,0.E0));
++#2422=AXIS2_PLACEMENT_3D('',#2419,#2420,#2421);
++#2424=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));
++#2425=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2426=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2427=AXIS2_PLACEMENT_3D('',#2424,#2425,#2426);
++#2429=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2430=VECTOR('',#2429,1.E0);
++#2431=CARTESIAN_POINT('',(2.30675E1,1.E0,2.4E1));
++#2432=LINE('',#2431,#2430);
++#2433=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2434=VECTOR('',#2433,1.E0);
++#2435=CARTESIAN_POINT('',(2.26825E1,1.E0,2.4E1));
++#2436=LINE('',#2435,#2434);
++#2437=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2438=VECTOR('',#2437,5.E-1);
++#2439=CARTESIAN_POINT('',(6.256E0,1.5E0,1.25E0));
++#2440=LINE('',#2439,#2438);
++#2441=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2442=VECTOR('',#2441,5.E-1);
++#2443=CARTESIAN_POINT('',(5.744E0,1.5E0,1.25E0));
++#2444=LINE('',#2443,#2442);
++#2445=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));
++#2446=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2447=DIRECTION('',(1.E0,0.E0,0.E0));
++#2448=AXIS2_PLACEMENT_3D('',#2445,#2446,#2447);
++#2450=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));
++#2451=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2452=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2453=AXIS2_PLACEMENT_3D('',#2450,#2451,#2452);
++#2455=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));
++#2456=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2457=DIRECTION('',(1.E0,0.E0,0.E0));
++#2458=AXIS2_PLACEMENT_3D('',#2455,#2456,#2457);
++#2460=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));
++#2461=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2462=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2463=AXIS2_PLACEMENT_3D('',#2460,#2461,#2462);
++#2465=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2466=VECTOR('',#2465,1.E0);
++#2467=CARTESIAN_POINT('',(6.1925E0,1.E0,1.25E0));
++#2468=LINE('',#2467,#2466);
++#2469=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2470=VECTOR('',#2469,1.E0);
++#2471=CARTESIAN_POINT('',(5.8075E0,1.E0,1.25E0));
++#2472=LINE('',#2471,#2470);
++#2473=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2474=VECTOR('',#2473,5.E-1);
++#2475=CARTESIAN_POINT('',(1.2256E1,1.5E0,1.25E0));
++#2476=LINE('',#2475,#2474);
++#2477=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2478=VECTOR('',#2477,5.E-1);
++#2479=CARTESIAN_POINT('',(1.1744E1,1.5E0,1.25E0));
++#2480=LINE('',#2479,#2478);
++#2481=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));
++#2482=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2483=DIRECTION('',(1.E0,0.E0,0.E0));
++#2484=AXIS2_PLACEMENT_3D('',#2481,#2482,#2483);
++#2486=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));
++#2487=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2488=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2489=AXIS2_PLACEMENT_3D('',#2486,#2487,#2488);
++#2491=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));
++#2492=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2493=DIRECTION('',(1.E0,0.E0,0.E0));
++#2494=AXIS2_PLACEMENT_3D('',#2491,#2492,#2493);
++#2496=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));
++#2497=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2498=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2499=AXIS2_PLACEMENT_3D('',#2496,#2497,#2498);
++#2501=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2502=VECTOR('',#2501,1.E0);
++#2503=CARTESIAN_POINT('',(1.21925E1,1.E0,1.25E0));
++#2504=LINE('',#2503,#2502);
++#2505=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2506=VECTOR('',#2505,1.E0);
++#2507=CARTESIAN_POINT('',(1.18075E1,1.E0,1.25E0));
++#2508=LINE('',#2507,#2506);
++#2509=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2510=VECTOR('',#2509,5.E-1);
++#2511=CARTESIAN_POINT('',(1.8256E1,1.5E0,1.25E0));
++#2512=LINE('',#2511,#2510);
++#2513=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2514=VECTOR('',#2513,5.E-1);
++#2515=CARTESIAN_POINT('',(1.7744E1,1.5E0,1.25E0));
++#2516=LINE('',#2515,#2514);
++#2517=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));
++#2518=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2519=DIRECTION('',(1.E0,0.E0,0.E0));
++#2520=AXIS2_PLACEMENT_3D('',#2517,#2518,#2519);
++#2522=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));
++#2523=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2524=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2525=AXIS2_PLACEMENT_3D('',#2522,#2523,#2524);
++#2527=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));
++#2528=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2529=DIRECTION('',(1.E0,0.E0,0.E0));
++#2530=AXIS2_PLACEMENT_3D('',#2527,#2528,#2529);
++#2532=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));
++#2533=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2534=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2535=AXIS2_PLACEMENT_3D('',#2532,#2533,#2534);
++#2537=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2538=VECTOR('',#2537,1.E0);
++#2539=CARTESIAN_POINT('',(1.81925E1,1.E0,1.25E0));
++#2540=LINE('',#2539,#2538);
++#2541=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2542=VECTOR('',#2541,1.E0);
++#2543=CARTESIAN_POINT('',(1.78075E1,1.E0,1.25E0));
++#2544=LINE('',#2543,#2542);
++#2545=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2546=VECTOR('',#2545,5.E-1);
++#2547=CARTESIAN_POINT('',(6.256E0,1.5E0,3.075E1));
++#2548=LINE('',#2547,#2546);
++#2549=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2550=VECTOR('',#2549,5.E-1);
++#2551=CARTESIAN_POINT('',(5.744E0,1.5E0,3.075E1));
++#2552=LINE('',#2551,#2550);
++#2553=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));
++#2554=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2555=DIRECTION('',(1.E0,0.E0,0.E0));
++#2556=AXIS2_PLACEMENT_3D('',#2553,#2554,#2555);
++#2558=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));
++#2559=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2560=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2561=AXIS2_PLACEMENT_3D('',#2558,#2559,#2560);
++#2563=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));
++#2564=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2565=DIRECTION('',(1.E0,0.E0,0.E0));
++#2566=AXIS2_PLACEMENT_3D('',#2563,#2564,#2565);
++#2568=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));
++#2569=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2570=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2571=AXIS2_PLACEMENT_3D('',#2568,#2569,#2570);
++#2573=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2574=VECTOR('',#2573,1.E0);
++#2575=CARTESIAN_POINT('',(6.1925E0,1.E0,3.075E1));
++#2576=LINE('',#2575,#2574);
++#2577=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2578=VECTOR('',#2577,1.E0);
++#2579=CARTESIAN_POINT('',(5.8075E0,1.E0,3.075E1));
++#2580=LINE('',#2579,#2578);
++#2581=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2582=VECTOR('',#2581,5.E-1);
++#2583=CARTESIAN_POINT('',(1.2256E1,1.5E0,3.075E1));
++#2584=LINE('',#2583,#2582);
++#2585=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2586=VECTOR('',#2585,5.E-1);
++#2587=CARTESIAN_POINT('',(1.1744E1,1.5E0,3.075E1));
++#2588=LINE('',#2587,#2586);
++#2589=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));
++#2590=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2591=DIRECTION('',(1.E0,0.E0,0.E0));
++#2592=AXIS2_PLACEMENT_3D('',#2589,#2590,#2591);
++#2594=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));
++#2595=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2596=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2597=AXIS2_PLACEMENT_3D('',#2594,#2595,#2596);
++#2599=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));
++#2600=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2601=DIRECTION('',(1.E0,0.E0,0.E0));
++#2602=AXIS2_PLACEMENT_3D('',#2599,#2600,#2601);
++#2604=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));
++#2605=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2606=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2607=AXIS2_PLACEMENT_3D('',#2604,#2605,#2606);
++#2609=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2610=VECTOR('',#2609,1.E0);
++#2611=CARTESIAN_POINT('',(1.21925E1,1.E0,3.075E1));
++#2612=LINE('',#2611,#2610);
++#2613=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2614=VECTOR('',#2613,1.E0);
++#2615=CARTESIAN_POINT('',(1.18075E1,1.E0,3.075E1));
++#2616=LINE('',#2615,#2614);
++#2617=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2618=VECTOR('',#2617,5.E-1);
++#2619=CARTESIAN_POINT('',(1.8256E1,1.5E0,3.075E1));
++#2620=LINE('',#2619,#2618);
++#2621=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2622=VECTOR('',#2621,5.E-1);
++#2623=CARTESIAN_POINT('',(1.7744E1,1.5E0,3.075E1));
++#2624=LINE('',#2623,#2622);
++#2625=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));
++#2626=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2627=DIRECTION('',(1.E0,0.E0,0.E0));
++#2628=AXIS2_PLACEMENT_3D('',#2625,#2626,#2627);
++#2630=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));
++#2631=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2632=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2633=AXIS2_PLACEMENT_3D('',#2630,#2631,#2632);
++#2635=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));
++#2636=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2637=DIRECTION('',(1.E0,0.E0,0.E0));
++#2638=AXIS2_PLACEMENT_3D('',#2635,#2636,#2637);
++#2640=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));
++#2641=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2642=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2643=AXIS2_PLACEMENT_3D('',#2640,#2641,#2642);
++#2645=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2646=VECTOR('',#2645,1.E0);
++#2647=CARTESIAN_POINT('',(1.81925E1,1.E0,3.075E1));
++#2648=LINE('',#2647,#2646);
++#2649=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2650=VECTOR('',#2649,1.E0);
++#2651=CARTESIAN_POINT('',(1.78075E1,1.E0,3.075E1));
++#2652=LINE('',#2651,#2650);
++#2653=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2654=VECTOR('',#2653,5.E-1);
++#2655=CARTESIAN_POINT('',(6.2575E0,1.5E0,9.E0));
++#2656=LINE('',#2655,#2654);
++#2657=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2658=VECTOR('',#2657,5.E-1);
++#2659=CARTESIAN_POINT('',(5.7425E0,1.5E0,9.E0));
++#2660=LINE('',#2659,#2658);
++#2661=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));
++#2662=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2663=DIRECTION('',(1.E0,0.E0,0.E0));
++#2664=AXIS2_PLACEMENT_3D('',#2661,#2662,#2663);
++#2666=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));
++#2667=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2668=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2669=AXIS2_PLACEMENT_3D('',#2666,#2667,#2668);
++#2671=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));
++#2672=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2673=DIRECTION('',(1.E0,0.E0,0.E0));
++#2674=AXIS2_PLACEMENT_3D('',#2671,#2672,#2673);
++#2676=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));
++#2677=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2678=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2679=AXIS2_PLACEMENT_3D('',#2676,#2677,#2678);
++#2681=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2682=VECTOR('',#2681,1.E0);
++#2683=CARTESIAN_POINT('',(6.1925E0,1.E0,9.E0));
++#2684=LINE('',#2683,#2682);
++#2685=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2686=VECTOR('',#2685,1.E0);
++#2687=CARTESIAN_POINT('',(5.8075E0,1.E0,9.E0));
++#2688=LINE('',#2687,#2686);
++#2689=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2690=VECTOR('',#2689,5.E-1);
++#2691=CARTESIAN_POINT('',(1.22575E1,1.5E0,9.E0));
++#2692=LINE('',#2691,#2690);
++#2693=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2694=VECTOR('',#2693,5.E-1);
++#2695=CARTESIAN_POINT('',(1.17425E1,1.5E0,9.E0));
++#2696=LINE('',#2695,#2694);
++#2697=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));
++#2698=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2699=DIRECTION('',(1.E0,0.E0,0.E0));
++#2700=AXIS2_PLACEMENT_3D('',#2697,#2698,#2699);
++#2702=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));
++#2703=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2704=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2705=AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);
++#2707=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));
++#2708=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2709=DIRECTION('',(1.E0,0.E0,0.E0));
++#2710=AXIS2_PLACEMENT_3D('',#2707,#2708,#2709);
++#2712=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));
++#2713=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2714=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2715=AXIS2_PLACEMENT_3D('',#2712,#2713,#2714);
++#2717=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2718=VECTOR('',#2717,1.E0);
++#2719=CARTESIAN_POINT('',(1.21925E1,1.E0,9.E0));
++#2720=LINE('',#2719,#2718);
++#2721=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2722=VECTOR('',#2721,1.E0);
++#2723=CARTESIAN_POINT('',(1.18075E1,1.E0,9.E0));
++#2724=LINE('',#2723,#2722);
++#2725=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2726=VECTOR('',#2725,5.E-1);
++#2727=CARTESIAN_POINT('',(1.82575E1,1.5E0,9.E0));
++#2728=LINE('',#2727,#2726);
++#2729=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2730=VECTOR('',#2729,5.E-1);
++#2731=CARTESIAN_POINT('',(1.77425E1,1.5E0,9.E0));
++#2732=LINE('',#2731,#2730);
++#2733=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));
++#2734=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2735=DIRECTION('',(1.E0,0.E0,0.E0));
++#2736=AXIS2_PLACEMENT_3D('',#2733,#2734,#2735);
++#2738=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));
++#2739=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2740=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2741=AXIS2_PLACEMENT_3D('',#2738,#2739,#2740);
++#2743=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));
++#2744=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2745=DIRECTION('',(1.E0,0.E0,0.E0));
++#2746=AXIS2_PLACEMENT_3D('',#2743,#2744,#2745);
++#2748=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));
++#2749=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2750=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2751=AXIS2_PLACEMENT_3D('',#2748,#2749,#2750);
++#2753=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2754=VECTOR('',#2753,1.E0);
++#2755=CARTESIAN_POINT('',(1.81925E1,1.E0,9.E0));
++#2756=LINE('',#2755,#2754);
++#2757=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2758=VECTOR('',#2757,1.E0);
++#2759=CARTESIAN_POINT('',(1.78075E1,1.E0,9.E0));
++#2760=LINE('',#2759,#2758);
++#2761=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2762=VECTOR('',#2761,5.E-1);
++#2763=CARTESIAN_POINT('',(6.2575E0,1.5E0,1.8E1));
++#2764=LINE('',#2763,#2762);
++#2765=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2766=VECTOR('',#2765,5.E-1);
++#2767=CARTESIAN_POINT('',(5.7425E0,1.5E0,1.8E1));
++#2768=LINE('',#2767,#2766);
++#2769=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));
++#2770=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2771=DIRECTION('',(1.E0,0.E0,0.E0));
++#2772=AXIS2_PLACEMENT_3D('',#2769,#2770,#2771);
++#2774=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));
++#2775=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2776=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2777=AXIS2_PLACEMENT_3D('',#2774,#2775,#2776);
++#2779=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));
++#2780=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2781=DIRECTION('',(1.E0,0.E0,0.E0));
++#2782=AXIS2_PLACEMENT_3D('',#2779,#2780,#2781);
++#2784=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));
++#2785=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2786=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2787=AXIS2_PLACEMENT_3D('',#2784,#2785,#2786);
++#2789=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2790=VECTOR('',#2789,1.E0);
++#2791=CARTESIAN_POINT('',(6.1925E0,1.E0,1.8E1));
++#2792=LINE('',#2791,#2790);
++#2793=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2794=VECTOR('',#2793,1.E0);
++#2795=CARTESIAN_POINT('',(5.8075E0,1.E0,1.8E1));
++#2796=LINE('',#2795,#2794);
++#2797=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2798=VECTOR('',#2797,5.E-1);
++#2799=CARTESIAN_POINT('',(1.22575E1,1.5E0,1.8E1));
++#2800=LINE('',#2799,#2798);
++#2801=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2802=VECTOR('',#2801,5.E-1);
++#2803=CARTESIAN_POINT('',(1.17425E1,1.5E0,1.8E1));
++#2804=LINE('',#2803,#2802);
++#2805=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));
++#2806=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2807=DIRECTION('',(1.E0,0.E0,0.E0));
++#2808=AXIS2_PLACEMENT_3D('',#2805,#2806,#2807);
++#2810=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));
++#2811=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2812=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2813=AXIS2_PLACEMENT_3D('',#2810,#2811,#2812);
++#2815=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));
++#2816=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2817=DIRECTION('',(1.E0,0.E0,0.E0));
++#2818=AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);
++#2820=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));
++#2821=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2822=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2823=AXIS2_PLACEMENT_3D('',#2820,#2821,#2822);
++#2825=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2826=VECTOR('',#2825,1.E0);
++#2827=CARTESIAN_POINT('',(1.21925E1,1.E0,1.8E1));
++#2828=LINE('',#2827,#2826);
++#2829=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2830=VECTOR('',#2829,1.E0);
++#2831=CARTESIAN_POINT('',(1.18075E1,1.E0,1.8E1));
++#2832=LINE('',#2831,#2830);
++#2833=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2834=VECTOR('',#2833,5.E-1);
++#2835=CARTESIAN_POINT('',(1.82575E1,1.5E0,1.8E1));
++#2836=LINE('',#2835,#2834);
++#2837=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2838=VECTOR('',#2837,5.E-1);
++#2839=CARTESIAN_POINT('',(1.77425E1,1.5E0,1.8E1));
++#2840=LINE('',#2839,#2838);
++#2841=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));
++#2842=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2843=DIRECTION('',(1.E0,0.E0,0.E0));
++#2844=AXIS2_PLACEMENT_3D('',#2841,#2842,#2843);
++#2846=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));
++#2847=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2848=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2849=AXIS2_PLACEMENT_3D('',#2846,#2847,#2848);
++#2851=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));
++#2852=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2853=DIRECTION('',(1.E0,0.E0,0.E0));
++#2854=AXIS2_PLACEMENT_3D('',#2851,#2852,#2853);
++#2856=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));
++#2857=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2858=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2859=AXIS2_PLACEMENT_3D('',#2856,#2857,#2858);
++#2861=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2862=VECTOR('',#2861,1.E0);
++#2863=CARTESIAN_POINT('',(1.81925E1,1.E0,1.8E1));
++#2864=LINE('',#2863,#2862);
++#2865=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2866=VECTOR('',#2865,1.E0);
++#2867=CARTESIAN_POINT('',(1.78075E1,1.E0,1.8E1));
++#2868=LINE('',#2867,#2866);
++#2869=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#2870=VECTOR('',#2869,5.773502691896E0);
++#2871=CARTESIAN_POINT('',(2.2E1,6.5E0,1.E1));
++#2872=LINE('',#2871,#2870);
++#2873=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));
++#2874=CARTESIAN_POINT('',(2.31325E1,2.930774450068E0,1.206069333205E1));
++#2875=CARTESIAN_POINT('',(2.309416136180E1,2.745461691651E0,1.216768370301E1));
++#2876=CARTESIAN_POINT('',(2.297013771881E1,2.608885438662E0,1.224653603944E1));
++#2877=CARTESIAN_POINT('',(2.2875E1,2.580400233539E0,1.226298198028E1));
++#2878=CARTESIAN_POINT('',(2.277986228119E1,2.608885438662E0,1.224653603944E1));
++#2879=CARTESIAN_POINT('',(2.265583863820E1,2.745461691651E0,1.216768370301E1));
++#2880=CARTESIAN_POINT('',(2.26175E1,2.930774450068E0,1.206069333205E1));
++#2881=CARTESIAN_POINT('',(2.26175E1,3.035898384862E0,1.2E1));
++#2883=CARTESIAN_POINT('',(2.26175E1,3.035898384862E0,1.2E1));
++#2884=CARTESIAN_POINT('',(2.26175E1,3.141022319657E0,1.193930666795E1));
++#2885=CARTESIAN_POINT('',(2.265583863820E1,3.326335078073E0,1.183231629699E1));
++#2886=CARTESIAN_POINT('',(2.277986228119E1,3.462911331062E0,1.175346396056E1));
++#2887=CARTESIAN_POINT('',(2.2875E1,3.491396536186E0,1.173701801972E1));
++#2888=CARTESIAN_POINT('',(2.297013771881E1,3.462911331062E0,1.175346396056E1));
++#2889=CARTESIAN_POINT('',(2.309416136180E1,3.326335078073E0,1.183231629699E1));
++#2890=CARTESIAN_POINT('',(2.31325E1,3.141022319657E0,1.193930666795E1));
++#2891=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));
++#2893=DIRECTION('',(0.E0,1.E0,0.E0));
++#2894=VECTOR('',#2893,2.035898384862E0);
++#2895=CARTESIAN_POINT('',(2.26175E1,1.E0,1.2E1));
++#2896=LINE('',#2895,#2894);
++#2897=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2898=VECTOR('',#2897,2.035898384862E0);
++#2899=CARTESIAN_POINT('',(2.31325E1,3.035898384862E0,1.2E1));
++#2900=LINE('',#2899,#2898);
++#2901=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));
++#2902=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2903=DIRECTION('',(1.E0,0.E0,0.E0));
++#2904=AXIS2_PLACEMENT_3D('',#2901,#2902,#2903);
++#2906=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));
++#2907=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2908=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2909=AXIS2_PLACEMENT_3D('',#2906,#2907,#2908);
++#2911=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));
++#2912=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2913=DIRECTION('',(1.E0,0.E0,0.E0));
++#2914=AXIS2_PLACEMENT_3D('',#2911,#2912,#2913);
++#2916=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));
++#2917=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2918=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2919=AXIS2_PLACEMENT_3D('',#2916,#2917,#2918);
++#2921=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2922=VECTOR('',#2921,1.E0);
++#2923=CARTESIAN_POINT('',(2.30675E1,1.E0,1.2E1));
++#2924=LINE('',#2923,#2922);
++#2925=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2926=VECTOR('',#2925,1.E0);
++#2927=CARTESIAN_POINT('',(2.26825E1,1.E0,1.2E1));
++#2928=LINE('',#2927,#2926);
++#2929=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2930=VECTOR('',#2929,5.E-1);
++#2931=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));
++#2932=LINE('',#2931,#2930);
++#2933=CARTESIAN_POINT('',(2.185E1,6.65E0,9.5E0));
++#2934=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2935=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2936=AXIS2_PLACEMENT_3D('',#2933,#2934,#2935);
++#2938=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2939=VECTOR('',#2938,5.E-1);
++#2940=CARTESIAN_POINT('',(2.185E1,7.E0,1.E1));
++#2941=LINE('',#2940,#2939);
++#2942=CARTESIAN_POINT('',(2.185E1,6.65E0,1.E1));
++#2943=DIRECTION('',(0.E0,0.E0,1.E0));
++#2944=DIRECTION('',(1.015061051086E-14,1.E0,0.E0));
++#2945=AXIS2_PLACEMENT_3D('',#2942,#2943,#2944);
++#2947=DIRECTION('',(0.E0,0.E0,1.E0));
++#2948=VECTOR('',#2947,5.E-1);
++#2949=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));
++#2950=LINE('',#2949,#2948);
++#2951=CARTESIAN_POINT('',(2.115E1,2.35E0,9.5E0));
++#2952=DIRECTION('',(0.E0,0.E0,1.E0));
++#2953=DIRECTION('',(0.E0,-1.E0,0.E0));
++#2954=AXIS2_PLACEMENT_3D('',#2951,#2952,#2953);
++#2956=DIRECTION('',(0.E0,0.E0,1.E0));
++#2957=VECTOR('',#2956,5.E-1);
++#2958=CARTESIAN_POINT('',(2.15E1,2.35E0,9.5E0));
++#2959=LINE('',#2958,#2957);
++#2960=CARTESIAN_POINT('',(2.115E1,2.35E0,1.E1));
++#2961=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2962=DIRECTION('',(1.E0,0.E0,0.E0));
++#2963=AXIS2_PLACEMENT_3D('',#2960,#2961,#2962);
++#2965=DIRECTION('',(0.E0,0.E0,1.E0));
++#2966=VECTOR('',#2965,5.E-1);
++#2967=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));
++#2968=LINE('',#2967,#2966);
++#2969=CARTESIAN_POINT('',(1.985E1,2.35E0,9.5E0));
++#2970=DIRECTION('',(0.E0,0.E0,1.E0));
++#2971=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2972=AXIS2_PLACEMENT_3D('',#2969,#2970,#2971);
++#2974=DIRECTION('',(0.E0,0.E0,1.E0));
++#2975=VECTOR('',#2974,5.E-1);
++#2976=CARTESIAN_POINT('',(1.985E1,2.E0,9.5E0));
++#2977=LINE('',#2976,#2975);
++#2978=CARTESIAN_POINT('',(1.985E1,2.35E0,1.E1));
++#2979=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2980=DIRECTION('',(1.015061051086E-14,-1.E0,0.E0));
++#2981=AXIS2_PLACEMENT_3D('',#2978,#2979,#2980);
++#2983=DIRECTION('',(0.E0,0.E0,1.E0));
++#2984=VECTOR('',#2983,5.E-1);
++#2985=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));
++#2986=LINE('',#2985,#2984);
++#2987=CARTESIAN_POINT('',(1.985E1,9.15E0,9.5E0));
++#2988=DIRECTION('',(0.E0,0.E0,1.E0));
++#2989=DIRECTION('',(1.015061051086E-14,1.E0,0.E0));
++#2990=AXIS2_PLACEMENT_3D('',#2987,#2988,#2989);
++#2992=DIRECTION('',(0.E0,0.E0,1.E0));
++#2993=VECTOR('',#2992,5.E-1);
++#2994=CARTESIAN_POINT('',(1.95E1,9.15E0,9.5E0));
++#2995=LINE('',#2994,#2993);
++#2996=CARTESIAN_POINT('',(1.985E1,9.15E0,1.E1));
++#2997=DIRECTION('',(0.E0,0.E0,-1.E0));
++#2998=DIRECTION('',(-1.E0,0.E0,0.E0));
++#2999=AXIS2_PLACEMENT_3D('',#2996,#2997,#2998);
++#3001=DIRECTION('',(0.E0,0.E0,1.E0));
++#3002=VECTOR('',#3001,5.E-1);
++#3003=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));
++#3004=LINE('',#3003,#3002);
++#3005=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,9.5E0));
++#3006=DIRECTION('',(0.E0,0.E0,1.E0));
++#3007=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#3008=AXIS2_PLACEMENT_3D('',#3005,#3006,#3007);
++#3010=DIRECTION('',(0.E0,0.E0,1.E0));
++#3011=VECTOR('',#3010,5.E-1);
++#3012=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,9.5E0));
++#3013=LINE('',#3012,#3011);
++#3014=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,1.E1));
++#3015=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3016=DIRECTION('',(0.E0,1.E0,0.E0));
++#3017=AXIS2_PLACEMENT_3D('',#3014,#3015,#3016);
++#3019=DIRECTION('',(0.E0,0.E0,1.E0));
++#3020=VECTOR('',#3019,5.E-1);
++#3021=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));
++#3022=LINE('',#3021,#3020);
++#3023=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,9.5E0));
++#3024=DIRECTION('',(0.E0,0.E0,1.E0));
++#3025=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3026=AXIS2_PLACEMENT_3D('',#3023,#3024,#3025);
++#3028=DIRECTION('',(0.E0,0.E0,1.E0));
++#3029=VECTOR('',#3028,5.E-1);
++#3030=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,9.5E0));
++#3031=LINE('',#3030,#3029);
++#3032=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,1.E1));
++#3033=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3034=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#3035=AXIS2_PLACEMENT_3D('',#3032,#3033,#3034);
++#3037=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3038=VECTOR('',#3037,1.972007605460E-1);
++#3039=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));
++#3040=LINE('',#3039,#3038);
++#3041=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3042=VECTOR('',#3041,4.3E0);
++#3043=CARTESIAN_POINT('',(2.15E1,6.65E0,9.5E0));
++#3044=LINE('',#3043,#3042);
++#3045=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3046=VECTOR('',#3045,1.3E0);
++#3047=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));
++#3048=LINE('',#3047,#3046);
++#3049=DIRECTION('',(0.E0,1.E0,0.E0));
++#3050=VECTOR('',#3049,6.8E0);
++#3051=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));
++#3052=LINE('',#3051,#3050);
++#3053=DIRECTION('',(1.E0,0.E0,0.E0));
++#3054=VECTOR('',#3053,1.197200760546E0);
++#3055=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));
++#3056=LINE('',#3055,#3054);
++#3057=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#3058=VECTOR('',#3057,2.059126028197E0);
++#3059=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));
++#3060=LINE('',#3059,#3058);
++#3061=DIRECTION('',(0.E0,0.E0,1.E0));
++#3062=VECTOR('',#3061,2.5E-1);
++#3063=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.E0));
++#3064=LINE('',#3063,#3062);
++#3065=DIRECTION('',(0.E0,0.E0,1.E0));
++#3066=VECTOR('',#3065,2.5E-1);
++#3067=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.E0));
++#3068=LINE('',#3067,#3066);
++#3069=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));
++#3070=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3071=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3072=AXIS2_PLACEMENT_3D('',#3069,#3070,#3071);
++#3074=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));
++#3075=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3076=DIRECTION('',(1.E0,0.E0,0.E0));
++#3077=AXIS2_PLACEMENT_3D('',#3074,#3075,#3076);
++#3079=DIRECTION('',(0.E0,0.E0,1.E0));
++#3080=VECTOR('',#3079,2.5E-1);
++#3081=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.E0));
++#3082=LINE('',#3081,#3080);
++#3083=DIRECTION('',(0.E0,0.E0,1.E0));
++#3084=VECTOR('',#3083,2.5E-1);
++#3085=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.E0));
++#3086=LINE('',#3085,#3084);
++#3087=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));
++#3088=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3089=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3090=AXIS2_PLACEMENT_3D('',#3087,#3088,#3089);
++#3092=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));
++#3093=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3094=DIRECTION('',(1.E0,0.E0,0.E0));
++#3095=AXIS2_PLACEMENT_3D('',#3092,#3093,#3094);
++#3097=DIRECTION('',(0.E0,0.E0,1.E0));
++#3098=VECTOR('',#3097,2.5E-1);
++#3099=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.E0));
++#3100=LINE('',#3099,#3098);
++#3101=DIRECTION('',(0.E0,0.E0,1.E0));
++#3102=VECTOR('',#3101,2.5E-1);
++#3103=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.E0));
++#3104=LINE('',#3103,#3102);
++#3105=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));
++#3106=DIRECTION('',(0.E0,0.E0,1.E0));
++#3107=DIRECTION('',(1.E0,0.E0,0.E0));
++#3108=AXIS2_PLACEMENT_3D('',#3105,#3106,#3107);
++#3110=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));
++#3111=DIRECTION('',(0.E0,0.E0,1.E0));
++#3112=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3113=AXIS2_PLACEMENT_3D('',#3110,#3111,#3112);
++#3115=DIRECTION('',(0.E0,0.E0,1.E0));
++#3116=VECTOR('',#3115,2.5E-1);
++#3117=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.E0));
++#3118=LINE('',#3117,#3116);
++#3119=DIRECTION('',(0.E0,0.E0,1.E0));
++#3120=VECTOR('',#3119,2.5E-1);
++#3121=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.E0));
++#3122=LINE('',#3121,#3120);
++#3123=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));
++#3124=DIRECTION('',(0.E0,0.E0,1.E0));
++#3125=DIRECTION('',(1.E0,0.E0,0.E0));
++#3126=AXIS2_PLACEMENT_3D('',#3123,#3124,#3125);
++#3128=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));
++#3129=DIRECTION('',(0.E0,0.E0,1.E0));
++#3130=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3131=AXIS2_PLACEMENT_3D('',#3128,#3129,#3130);
++#3133=DIRECTION('',(0.E0,0.E0,1.E0));
++#3134=VECTOR('',#3133,2.5E-1);
++#3135=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.E0));
++#3136=LINE('',#3135,#3134);
++#3137=DIRECTION('',(0.E0,0.E0,1.E0));
++#3138=VECTOR('',#3137,2.5E-1);
++#3139=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.E0));
++#3140=LINE('',#3139,#3138);
++#3141=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));
++#3142=DIRECTION('',(0.E0,0.E0,1.E0));
++#3143=DIRECTION('',(1.E0,0.E0,0.E0));
++#3144=AXIS2_PLACEMENT_3D('',#3141,#3142,#3143);
++#3146=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));
++#3147=DIRECTION('',(0.E0,0.E0,1.E0));
++#3148=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3149=AXIS2_PLACEMENT_3D('',#3146,#3147,#3148);
++#3151=DIRECTION('',(0.E0,0.E0,1.E0));
++#3152=VECTOR('',#3151,5.E-1);
++#3153=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));
++#3154=LINE('',#3153,#3152);
++#3155=CARTESIAN_POINT('',(3.75E0,2.75E0,8.E0));
++#3156=DIRECTION('',(0.E0,0.E0,1.E0));
++#3157=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3158=AXIS2_PLACEMENT_3D('',#3155,#3156,#3157);
++#3160=DIRECTION('',(0.E0,0.E0,1.E0));
++#3161=VECTOR('',#3160,5.E-1);
++#3162=CARTESIAN_POINT('',(4.5E0,2.75E0,8.E0));
++#3163=LINE('',#3162,#3161);
++#3164=CARTESIAN_POINT('',(3.75E0,2.75E0,8.5E0));
++#3165=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3166=DIRECTION('',(1.E0,0.E0,0.E0));
++#3167=AXIS2_PLACEMENT_3D('',#3164,#3165,#3166);
++#3169=DIRECTION('',(0.E0,0.E0,1.E0));
++#3170=VECTOR('',#3169,5.E-1);
++#3171=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));
++#3172=LINE('',#3171,#3170);
++#3173=CARTESIAN_POINT('',(3.75E0,8.75E0,8.E0));
++#3174=DIRECTION('',(0.E0,0.E0,1.E0));
++#3175=DIRECTION('',(1.E0,0.E0,0.E0));
++#3176=AXIS2_PLACEMENT_3D('',#3173,#3174,#3175);
++#3178=DIRECTION('',(0.E0,0.E0,1.E0));
++#3179=VECTOR('',#3178,5.E-1);
++#3180=CARTESIAN_POINT('',(3.75E0,9.5E0,8.E0));
++#3181=LINE('',#3180,#3179);
++#3182=CARTESIAN_POINT('',(3.75E0,8.75E0,8.5E0));
++#3183=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3184=DIRECTION('',(0.E0,1.E0,0.E0));
++#3185=AXIS2_PLACEMENT_3D('',#3182,#3183,#3184);
++#3187=DIRECTION('',(0.E0,0.E0,1.E0));
++#3188=VECTOR('',#3187,5.E-1);
++#3189=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));
++#3190=LINE('',#3189,#3188);
++#3191=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,8.E0));
++#3192=DIRECTION('',(0.E0,0.E0,1.E0));
++#3193=DIRECTION('',(0.E0,1.E0,0.E0));
++#3194=AXIS2_PLACEMENT_3D('',#3191,#3192,#3193);
++#3196=DIRECTION('',(0.E0,0.E0,1.E0));
++#3197=VECTOR('',#3196,5.E-1);
++#3198=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.E0));
++#3199=LINE('',#3198,#3197);
++#3200=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,8.5E0));
++#3201=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3202=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#3203=AXIS2_PLACEMENT_3D('',#3200,#3201,#3202);
++#3205=DIRECTION('',(0.E0,0.E0,1.E0));
++#3206=VECTOR('',#3205,5.E-1);
++#3207=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));
++#3208=LINE('',#3207,#3206);
++#3209=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,8.E0));
++#3210=DIRECTION('',(0.E0,0.E0,1.E0));
++#3211=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#3212=AXIS2_PLACEMENT_3D('',#3209,#3210,#3211);
++#3214=DIRECTION('',(0.E0,0.E0,1.E0));
++#3215=VECTOR('',#3214,5.E-1);
++#3216=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.E0));
++#3217=LINE('',#3216,#3215);
++#3218=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,8.5E0));
++#3219=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3220=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3221=AXIS2_PLACEMENT_3D('',#3218,#3219,#3220);
++#3223=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3224=VECTOR('',#3223,6.E0);
++#3225=CARTESIAN_POINT('',(4.5E0,8.75E0,8.5E0));
++#3226=LINE('',#3225,#3224);
++#3227=DIRECTION('',(1.E0,0.E0,0.E0));
++#3228=VECTOR('',#3227,5.618394209466E-1);
++#3229=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.5E0));
++#3230=LINE('',#3229,#3228);
++#3231=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));
++#3232=VECTOR('',#3231,6.863753427325E0);
++#3233=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.5E0));
++#3234=LINE('',#3233,#3232);
++#3235=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3236=VECTOR('',#3235,3.895172754280E0);
++#3237=CARTESIAN_POINT('',(3.75E0,2.E0,8.5E0));
++#3238=LINE('',#3237,#3236);
++#3239=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3240=VECTOR('',#3239,5.E-1);
++#3241=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));
++#3242=LINE('',#3241,#3240);
++#3243=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.5E0));
++#3244=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3245=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#3246=AXIS2_PLACEMENT_3D('',#3243,#3244,#3245);
++#3248=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3249=VECTOR('',#3248,5.E-1);
++#3250=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.5E0));
++#3251=LINE('',#3250,#3249);
++#3252=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.E0));
++#3253=DIRECTION('',(0.E0,0.E0,1.E0));
++#3254=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3255=AXIS2_PLACEMENT_3D('',#3252,#3253,#3254);
++#3257=DIRECTION('',(1.E0,0.E0,0.E0));
++#3258=VECTOR('',#3257,3.895172754280E0);
++#3259=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));
++#3260=LINE('',#3259,#3258);
++#3261=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));
++#3262=VECTOR('',#3261,6.863753427325E0);
++#3263=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));
++#3264=LINE('',#3263,#3262);
++#3265=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3266=VECTOR('',#3265,5.618394209466E-1);
++#3267=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));
++#3268=LINE('',#3267,#3266);
++#3269=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3270=VECTOR('',#3269,6.E0);
++#3271=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));
++#3272=LINE('',#3271,#3270);
++#3273=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3274=VECTOR('',#3273,5.E-1);
++#3275=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));
++#3276=LINE('',#3275,#3274);
++#3277=CARTESIAN_POINT('',(2.025E1,2.75E0,8.5E0));
++#3278=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3279=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3280=AXIS2_PLACEMENT_3D('',#3277,#3278,#3279);
++#3282=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3283=VECTOR('',#3282,5.E-1);
++#3284=CARTESIAN_POINT('',(1.95E1,2.75E0,8.5E0));
++#3285=LINE('',#3284,#3283);
++#3286=CARTESIAN_POINT('',(2.025E1,2.75E0,8.E0));
++#3287=DIRECTION('',(0.E0,0.E0,1.E0));
++#3288=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3289=AXIS2_PLACEMENT_3D('',#3286,#3287,#3288);
++#3291=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3292=VECTOR('',#3291,5.E-1);
++#3293=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));
++#3294=LINE('',#3293,#3292);
++#3295=CARTESIAN_POINT('',(2.025E1,8.75E0,8.5E0));
++#3296=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3297=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3298=AXIS2_PLACEMENT_3D('',#3295,#3296,#3297);
++#3300=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3301=VECTOR('',#3300,5.E-1);
++#3302=CARTESIAN_POINT('',(2.025E1,9.5E0,8.5E0));
++#3303=LINE('',#3302,#3301);
++#3304=CARTESIAN_POINT('',(2.025E1,8.75E0,8.E0));
++#3305=DIRECTION('',(0.E0,0.E0,1.E0));
++#3306=DIRECTION('',(0.E0,1.E0,0.E0));
++#3307=AXIS2_PLACEMENT_3D('',#3304,#3305,#3306);
++#3309=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3310=VECTOR('',#3309,5.E-1);
++#3311=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));
++#3312=LINE('',#3311,#3310);
++#3313=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.5E0));
++#3314=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3315=DIRECTION('',(0.E0,1.E0,0.E0));
++#3316=AXIS2_PLACEMENT_3D('',#3313,#3314,#3315);
++#3318=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3319=VECTOR('',#3318,5.E-1);
++#3320=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.5E0));
++#3321=LINE('',#3320,#3319);
++#3322=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.E0));
++#3323=DIRECTION('',(0.E0,0.E0,1.E0));
++#3324=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#3325=AXIS2_PLACEMENT_3D('',#3322,#3323,#3324);
++#3327=DIRECTION('',(0.E0,1.E0,0.E0));
++#3328=VECTOR('',#3327,6.875E-1);
++#3329=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));
++#3330=LINE('',#3329,#3328);
++#3331=DIRECTION('',(0.E0,1.E0,0.E0));
++#3332=VECTOR('',#3331,6.875E-1);
++#3333=CARTESIAN_POINT('',(7.5E0,0.E0,1.8125E0));
++#3334=LINE('',#3333,#3332);
++#3335=DIRECTION('',(0.E0,1.E0,0.E0));
++#3336=VECTOR('',#3335,6.875E-1);
++#3337=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));
++#3338=LINE('',#3337,#3336);
++#3339=DIRECTION('',(0.E0,1.E0,0.E0));
++#3340=VECTOR('',#3339,6.875E-1);
++#3341=CARTESIAN_POINT('',(1.05E1,0.E0,6.875E-1));
++#3342=LINE('',#3341,#3340);
++#3343=DIRECTION('',(1.E0,0.E0,0.E0));
++#3344=VECTOR('',#3343,3.E0);
++#3345=CARTESIAN_POINT('',(7.5E0,6.875E-1,6.875E-1));
++#3346=LINE('',#3345,#3344);
++#3347=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.25E0));
++#3348=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3349=DIRECTION('',(0.E0,0.E0,1.E0));
++#3350=AXIS2_PLACEMENT_3D('',#3347,#3348,#3349);
++#3352=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3353=VECTOR('',#3352,3.E0);
++#3354=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8125E0));
++#3355=LINE('',#3354,#3353);
++#3356=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.25E0));
++#3357=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3358=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3359=AXIS2_PLACEMENT_3D('',#3356,#3357,#3358);
++#3361=CARTESIAN_POINT('',(1.61E0,6.875E-1,4.5E0));
++#3362=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3363=DIRECTION('',(8.910741301059E-1,0.E0,4.538577912254E-1));
++#3364=AXIS2_PLACEMENT_3D('',#3361,#3362,#3363);
++#3366=CARTESIAN_POINT('',(7.5E0,6.875E-1,7.5E0));
++#3367=DIRECTION('',(0.E0,1.E0,0.E0));
++#3368=DIRECTION('',(-4.496088413988E-1,0.E0,-8.932255536739E-1));
++#3369=AXIS2_PLACEMENT_3D('',#3366,#3367,#3368);
++#3371=CARTESIAN_POINT('',(4.553039342392E0,6.875E-1,1.645354088550E0));
++#3372=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3373=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3374=AXIS2_PLACEMENT_3D('',#3371,#3372,#3373);
++#3376=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3377=VECTOR('',#3376,4.263248410977E0);
++#3378=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,4.046865146430E0));
++#3379=LINE('',#3378,#3377);
++#3380=DIRECTION('',(0.E0,1.E0,0.E0));
++#3381=VECTOR('',#3380,6.875E-1);
++#3382=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));
++#3383=LINE('',#3382,#3381);
++#3384=CARTESIAN_POINT('',(1.455736763592E0,0.E0,4.577195232320E0));
++#3385=DIRECTION('',(0.E0,1.E0,0.E0));
++#3386=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3387=AXIS2_PLACEMENT_3D('',#3384,#3385,#3386);
++#3389=DIRECTION('',(0.E0,1.E0,0.E0));
++#3390=VECTOR('',#3389,6.875E-1);
++#3391=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,4.912826677187E0));
++#3392=LINE('',#3391,#3390);
++#3393=CARTESIAN_POINT('',(1.455736763592E0,6.875E-1,4.577195232320E0));
++#3394=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3395=DIRECTION('',(-8.942796313519E-1,0.E0,4.475085931567E-1));
++#3396=AXIS2_PLACEMENT_3D('',#3393,#3394,#3395);
++#3398=DIRECTION('',(0.E0,1.E0,0.E0));
++#3399=VECTOR('',#3398,6.875E-1);
++#3400=CARTESIAN_POINT('',(3.939978538987E0,0.E0,1.032293285145E0));
++#3401=LINE('',#3400,#3399);
++#3402=DIRECTION('',(0.E0,1.E0,0.E0));
++#3403=VECTOR('',#3402,6.875E-1);
++#3404=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.419779663480E0));
++#3405=LINE('',#3404,#3403);
++#3406=DIRECTION('',(0.E0,1.E0,0.E0));
++#3407=VECTOR('',#3406,6.875E-1);
++#3408=CARTESIAN_POINT('',(2.432015885023E0,0.E0,4.918683812405E0));
++#3409=LINE('',#3408,#3407);
++#3410=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3411=VECTOR('',#3410,6.875E-1);
++#3412=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));
++#3413=LINE('',#3412,#3411);
++#3414=CARTESIAN_POINT('',(-1.85E-1,0.E0,7.815E0));
++#3415=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3416=DIRECTION('',(1.E0,0.E0,0.E0));
++#3417=AXIS2_PLACEMENT_3D('',#3414,#3415,#3416);
++#3419=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3420=VECTOR('',#3419,6.875E-1);
++#3421=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,8.69E0));
++#3422=LINE('',#3421,#3420);
++#3423=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,7.815E0));
++#3424=DIRECTION('',(0.E0,1.E0,0.E0));
++#3425=DIRECTION('',(0.E0,0.E0,1.E0));
++#3426=AXIS2_PLACEMENT_3D('',#3423,#3424,#3425);
++#3428=DIRECTION('',(1.E0,0.E0,0.E0));
++#3429=VECTOR('',#3428,7.5E-1);
++#3430=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));
++#3431=LINE('',#3430,#3429);
++#3432=DIRECTION('',(0.E0,0.E0,1.E0));
++#3433=VECTOR('',#3432,3.15E-1);
++#3434=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.5E0));
++#3435=LINE('',#3434,#3433);
++#3436=CARTESIAN_POINT('',(1.25125E0,6.875E-1,7.5E0));
++#3437=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3438=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3439=AXIS2_PLACEMENT_3D('',#3436,#3437,#3438);
++#3441=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3442=VECTOR('',#3441,3.15E-1);
++#3443=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));
++#3444=LINE('',#3443,#3442);
++#3445=DIRECTION('',(1.E0,0.E0,0.E0));
++#3446=VECTOR('',#3445,2.525E-1);
++#3447=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,8.69E0));
++#3448=LINE('',#3447,#3446);
++#3449=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3450=VECTOR('',#3449,8.1E-1);
++#3451=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,1.0375E1));
++#3452=LINE('',#3451,#3450);
++#3453=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3454=VECTOR('',#3453,3.875E0);
++#3455=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.125E1));
++#3456=LINE('',#3455,#3454);
++#3457=DIRECTION('',(0.E0,0.E0,1.E0));
++#3458=VECTOR('',#3457,8.1E-1);
++#3459=CARTESIAN_POINT('',(4.3125E0,6.875E-1,9.565E0));
++#3460=LINE('',#3459,#3458);
++#3461=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3462=VECTOR('',#3461,6.875E-1);
++#3463=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));
++#3464=LINE('',#3463,#3462);
++#3465=CARTESIAN_POINT('',(2.6875E0,0.E0,7.815E0));
++#3466=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3467=DIRECTION('',(0.E0,0.E0,1.E0));
++#3468=AXIS2_PLACEMENT_3D('',#3465,#3466,#3467);
++#3470=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3471=VECTOR('',#3470,6.875E-1);
++#3472=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.815E0));
++#3473=LINE('',#3472,#3471);
++#3474=CARTESIAN_POINT('',(2.6875E0,6.875E-1,7.815E0));
++#3475=DIRECTION('',(0.E0,1.E0,0.E0));
++#3476=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3477=AXIS2_PLACEMENT_3D('',#3474,#3475,#3476);
++#3479=DIRECTION('',(0.E0,1.E0,0.E0));
++#3480=VECTOR('',#3479,6.875E-1);
++#3481=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));
++#3482=LINE('',#3481,#3480);
++#3483=DIRECTION('',(0.E0,1.E0,0.E0));
++#3484=VECTOR('',#3483,6.875E-1);
++#3485=CARTESIAN_POINT('',(6.9E-1,0.E0,7.5E0));
++#3486=LINE('',#3485,#3484);
++#3487=DIRECTION('',(0.E0,1.E0,0.E0));
++#3488=VECTOR('',#3487,6.875E-1);
++#3489=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));
++#3490=LINE('',#3489,#3488);
++#3491=CARTESIAN_POINT('',(3.4375E0,0.E0,9.565E0));
++#3492=DIRECTION('',(0.E0,1.E0,0.E0));
++#3493=DIRECTION('',(1.E0,0.E0,0.E0));
++#3494=AXIS2_PLACEMENT_3D('',#3491,#3492,#3493);
++#3496=DIRECTION('',(0.E0,1.E0,0.E0));
++#3497=VECTOR('',#3496,6.875E-1);
++#3498=CARTESIAN_POINT('',(3.4375E0,0.E0,8.69E0));
++#3499=LINE('',#3498,#3497);
++#3500=CARTESIAN_POINT('',(3.4375E0,6.875E-1,9.565E0));
++#3501=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3502=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3503=AXIS2_PLACEMENT_3D('',#3500,#3501,#3502);
++#3505=DIRECTION('',(0.E0,1.E0,0.E0));
++#3506=VECTOR('',#3505,6.875E-1);
++#3507=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));
++#3508=LINE('',#3507,#3506);
++#3509=CARTESIAN_POINT('',(3.4375E0,0.E0,1.0375E1));
++#3510=DIRECTION('',(0.E0,1.E0,0.E0));
++#3511=DIRECTION('',(0.E0,0.E0,1.E0));
++#3512=AXIS2_PLACEMENT_3D('',#3509,#3510,#3511);
++#3514=DIRECTION('',(0.E0,1.E0,0.E0));
++#3515=VECTOR('',#3514,6.875E-1);
++#3516=CARTESIAN_POINT('',(4.3125E0,0.E0,1.0375E1));
++#3517=LINE('',#3516,#3515);
++#3518=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.0375E1));
++#3519=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3520=DIRECTION('',(1.E0,0.E0,0.E0));
++#3521=AXIS2_PLACEMENT_3D('',#3518,#3519,#3520);
++#3523=DIRECTION('',(0.E0,1.E0,0.E0));
++#3524=VECTOR('',#3523,6.875E-1);
++#3525=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));
++#3526=LINE('',#3525,#3524);
++#3527=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.0375E1));
++#3528=DIRECTION('',(0.E0,1.E0,0.E0));
++#3529=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3530=AXIS2_PLACEMENT_3D('',#3527,#3528,#3529);
++#3532=DIRECTION('',(0.E0,1.E0,0.E0));
++#3533=VECTOR('',#3532,6.875E-1);
++#3534=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.125E1));
++#3535=LINE('',#3534,#3533);
++#3536=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,1.0375E1));
++#3537=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3538=DIRECTION('',(0.E0,0.E0,1.E0));
++#3539=AXIS2_PLACEMENT_3D('',#3536,#3537,#3538);
++#3541=DIRECTION('',(0.E0,1.E0,0.E0));
++#3542=VECTOR('',#3541,6.875E-1);
++#3543=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));
++#3544=LINE('',#3543,#3542);
++#3545=CARTESIAN_POINT('',(-4.375E-1,0.E0,9.565E0));
++#3546=DIRECTION('',(0.E0,1.E0,0.E0));
++#3547=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3548=AXIS2_PLACEMENT_3D('',#3545,#3546,#3547);
++#3550=DIRECTION('',(0.E0,1.E0,0.E0));
++#3551=VECTOR('',#3550,6.875E-1);
++#3552=CARTESIAN_POINT('',(-1.3125E0,0.E0,9.565E0));
++#3553=LINE('',#3552,#3551);
++#3554=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,9.565E0));
++#3555=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3556=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3557=AXIS2_PLACEMENT_3D('',#3554,#3555,#3556);
++#3559=DIRECTION('',(0.E0,1.E0,0.E0));
++#3560=VECTOR('',#3559,6.875E-1);
++#3561=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));
++#3562=LINE('',#3561,#3560);
++#3563=DIRECTION('',(0.E0,1.E0,0.E0));
++#3564=VECTOR('',#3563,6.875E-1);
++#3565=CARTESIAN_POINT('',(1.8125E0,0.E0,1.65E1));
++#3566=LINE('',#3565,#3564);
++#3567=DIRECTION('',(0.E0,1.E0,0.E0));
++#3568=VECTOR('',#3567,6.875E-1);
++#3569=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));
++#3570=LINE('',#3569,#3568);
++#3571=DIRECTION('',(0.E0,1.E0,0.E0));
++#3572=VECTOR('',#3571,6.875E-1);
++#3573=CARTESIAN_POINT('',(6.875E-1,0.E0,1.35E1));
++#3574=LINE('',#3573,#3572);
++#3575=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3576=VECTOR('',#3575,3.E0);
++#3577=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.65E1));
++#3578=LINE('',#3577,#3576);
++#3579=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.65E1));
++#3580=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3581=DIRECTION('',(1.E0,0.E0,0.E0));
++#3582=AXIS2_PLACEMENT_3D('',#3579,#3580,#3581);
++#3584=DIRECTION('',(0.E0,0.E0,1.E0));
++#3585=VECTOR('',#3584,3.E0);
++#3586=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.35E1));
++#3587=LINE('',#3586,#3585);
++#3588=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.35E1));
++#3589=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3590=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3591=AXIS2_PLACEMENT_3D('',#3588,#3589,#3590);
++#3593=DIRECTION('',(0.E0,1.E0,0.E0));
++#3594=VECTOR('',#3593,6.875E-1);
++#3595=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));
++#3596=LINE('',#3595,#3594);
++#3597=DIRECTION('',(0.E0,1.E0,0.E0));
++#3598=VECTOR('',#3597,6.875E-1);
++#3599=CARTESIAN_POINT('',(1.8125E0,0.E0,2.25E1));
++#3600=LINE('',#3599,#3598);
++#3601=DIRECTION('',(0.E0,1.E0,0.E0));
++#3602=VECTOR('',#3601,6.875E-1);
++#3603=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));
++#3604=LINE('',#3603,#3602);
++#3605=DIRECTION('',(0.E0,1.E0,0.E0));
++#3606=VECTOR('',#3605,6.875E-1);
++#3607=CARTESIAN_POINT('',(6.875E-1,0.E0,1.95E1));
++#3608=LINE('',#3607,#3606);
++#3609=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3610=VECTOR('',#3609,3.E0);
++#3611=CARTESIAN_POINT('',(6.875E-1,6.875E-1,2.25E1));
++#3612=LINE('',#3611,#3610);
++#3613=CARTESIAN_POINT('',(1.25E0,6.875E-1,2.25E1));
++#3614=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3615=DIRECTION('',(1.E0,0.E0,0.E0));
++#3616=AXIS2_PLACEMENT_3D('',#3613,#3614,#3615);
++#3618=DIRECTION('',(0.E0,0.E0,1.E0));
++#3619=VECTOR('',#3618,3.E0);
++#3620=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.95E1));
++#3621=LINE('',#3620,#3619);
++#3622=CARTESIAN_POINT('',(1.25E0,6.875E-1,1.95E1));
++#3623=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3624=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3625=AXIS2_PLACEMENT_3D('',#3622,#3623,#3624);
++#3627=DIRECTION('',(0.E0,1.E0,0.E0));
++#3628=VECTOR('',#3627,6.875E-1);
++#3629=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));
++#3630=LINE('',#3629,#3628);
++#3631=DIRECTION('',(0.E0,1.E0,0.E0));
++#3632=VECTOR('',#3631,6.875E-1);
++#3633=CARTESIAN_POINT('',(7.5E0,0.E0,9.5E0));
++#3634=LINE('',#3633,#3632);
++#3635=DIRECTION('',(0.E0,1.E0,0.E0));
++#3636=VECTOR('',#3635,6.875E-1);
++#3637=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));
++#3638=LINE('',#3637,#3636);
++#3639=DIRECTION('',(0.E0,1.E0,0.E0));
++#3640=VECTOR('',#3639,6.875E-1);
++#3641=CARTESIAN_POINT('',(1.05E1,0.E0,8.5E0));
++#3642=LINE('',#3641,#3640);
++#3643=DIRECTION('',(1.E0,0.E0,0.E0));
++#3644=VECTOR('',#3643,3.E0);
++#3645=CARTESIAN_POINT('',(7.5E0,6.875E-1,8.5E0));
++#3646=LINE('',#3645,#3644);
++#3647=CARTESIAN_POINT('',(7.5E0,6.875E-1,9.E0));
++#3648=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3649=DIRECTION('',(0.E0,0.E0,1.E0));
++#3650=AXIS2_PLACEMENT_3D('',#3647,#3648,#3649);
++#3652=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3653=VECTOR('',#3652,3.E0);
++#3654=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.5E0));
++#3655=LINE('',#3654,#3653);
++#3656=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.E0));
++#3657=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3658=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3659=AXIS2_PLACEMENT_3D('',#3656,#3657,#3658);
++#3661=DIRECTION('',(0.E0,1.E0,0.E0));
++#3662=VECTOR('',#3661,6.875E-1);
++#3663=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));
++#3664=LINE('',#3663,#3662);
++#3665=DIRECTION('',(0.E0,1.E0,0.E0));
++#3666=VECTOR('',#3665,6.875E-1);
++#3667=CARTESIAN_POINT('',(7.5E0,0.E0,1.84375E1));
++#3668=LINE('',#3667,#3666);
++#3669=DIRECTION('',(0.E0,1.E0,0.E0));
++#3670=VECTOR('',#3669,6.875E-1);
++#3671=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));
++#3672=LINE('',#3671,#3670);
++#3673=DIRECTION('',(0.E0,1.E0,0.E0));
++#3674=VECTOR('',#3673,6.875E-1);
++#3675=CARTESIAN_POINT('',(1.05E1,0.E0,1.75625E1));
++#3676=LINE('',#3675,#3674);
++#3677=DIRECTION('',(1.E0,0.E0,0.E0));
++#3678=VECTOR('',#3677,3.E0);
++#3679=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.75625E1));
++#3680=LINE('',#3679,#3678);
++#3681=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.8E1));
++#3682=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3683=DIRECTION('',(0.E0,0.E0,1.E0));
++#3684=AXIS2_PLACEMENT_3D('',#3681,#3682,#3683);
++#3686=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3687=VECTOR('',#3686,3.E0);
++#3688=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.84375E1));
++#3689=LINE('',#3688,#3687);
++#3690=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8E1));
++#3691=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3692=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3693=AXIS2_PLACEMENT_3D('',#3690,#3691,#3692);
++#3695=DIRECTION('',(0.E0,1.E0,0.E0));
++#3696=VECTOR('',#3695,6.875E-1);
++#3697=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));
++#3698=LINE('',#3697,#3696);
++#3699=DIRECTION('',(0.E0,1.E0,0.E0));
++#3700=VECTOR('',#3699,6.875E-1);
++#3701=CARTESIAN_POINT('',(1.05E1,0.E0,3.13125E1));
++#3702=LINE('',#3701,#3700);
++#3703=DIRECTION('',(0.E0,1.E0,0.E0));
++#3704=VECTOR('',#3703,6.875E-1);
++#3705=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));
++#3706=LINE('',#3705,#3704);
++#3707=DIRECTION('',(0.E0,1.E0,0.E0));
++#3708=VECTOR('',#3707,6.875E-1);
++#3709=CARTESIAN_POINT('',(7.5E0,0.E0,3.01875E1));
++#3710=LINE('',#3709,#3708);
++#3711=DIRECTION('',(1.E0,0.E0,0.E0));
++#3712=VECTOR('',#3711,3.E0);
++#3713=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.13125E1));
++#3714=LINE('',#3713,#3712);
++#3715=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.075E1));
++#3716=DIRECTION('',(0.E0,1.E0,0.E0));
++#3717=DIRECTION('',(0.E0,0.E0,1.E0));
++#3718=AXIS2_PLACEMENT_3D('',#3715,#3716,#3717);
++#3720=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3721=VECTOR('',#3720,3.E0);
++#3722=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.01875E1));
++#3723=LINE('',#3722,#3721);
++#3724=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.075E1));
++#3725=DIRECTION('',(0.E0,1.E0,0.E0));
++#3726=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3727=AXIS2_PLACEMENT_3D('',#3724,#3725,#3726);
++#3729=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#3730=VECTOR('',#3729,4.263248410977E0);
++#3731=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,2.795313485357E1));
++#3732=LINE('',#3731,#3730);
++#3733=CARTESIAN_POINT('',(4.553039342392E0,6.875E-1,3.035464591145E1));
++#3734=DIRECTION('',(0.E0,1.E0,0.E0));
++#3735=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#3736=AXIS2_PLACEMENT_3D('',#3733,#3734,#3735);
++#3738=CARTESIAN_POINT('',(7.5E0,6.875E-1,2.45E1));
++#3739=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3740=DIRECTION('',(-4.496088413988E-1,0.E0,8.932255536739E-1));
++#3741=AXIS2_PLACEMENT_3D('',#3738,#3739,#3740);
++#3743=CARTESIAN_POINT('',(1.61E0,6.875E-1,2.75E1));
++#3744=DIRECTION('',(0.E0,1.E0,0.E0));
++#3745=DIRECTION('',(8.910741301059E-1,0.E0,-4.538577912254E-1));
++#3746=AXIS2_PLACEMENT_3D('',#3743,#3744,#3745);
++#3748=DIRECTION('',(0.E0,1.E0,-1.033516706560E-14));
++#3749=VECTOR('',#3748,6.875E-1);
++#3750=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,2.708717332281E1));
++#3751=LINE('',#3750,#3749);
++#3752=CARTESIAN_POINT('',(1.455736763592E0,0.E0,2.742280476768E1));
++#3753=DIRECTION('',(0.E0,1.E0,0.E0));
++#3754=DIRECTION('',(-8.942796313519E-1,0.E0,-4.475085931567E-1));
++#3755=AXIS2_PLACEMENT_3D('',#3752,#3753,#3754);
++#3757=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));
++#3758=VECTOR('',#3757,6.875E-1);
++#3759=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));
++#3760=LINE('',#3759,#3758);
++#3761=CARTESIAN_POINT('',(1.455736763592E0,6.875E-1,2.742280476768E1));
++#3762=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3763=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811866E-1));
++#3764=AXIS2_PLACEMENT_3D('',#3761,#3762,#3763);
++#3766=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));
++#3767=VECTOR('',#3766,6.875E-1);
++#3768=CARTESIAN_POINT('',(2.432015885023E0,0.E0,2.708131618759E1));
++#3769=LINE('',#3768,#3767);
++#3770=DIRECTION('',(0.E0,1.E0,0.E0));
++#3771=VECTOR('',#3770,6.875E-1);
++#3772=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.958022033652E1));
++#3773=LINE('',#3772,#3771);
++#3774=DIRECTION('',(0.E0,1.E0,0.E0));
++#3775=VECTOR('',#3774,6.875E-1);
++#3776=CARTESIAN_POINT('',(3.939978538987E0,0.E0,3.096770671486E1));
++#3777=LINE('',#3776,#3775);
++#3778=DIRECTION('',(0.E0,1.E0,0.E0));
++#3779=VECTOR('',#3778,6.875E-1);
++#3780=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));
++#3781=LINE('',#3780,#3779);
++#3782=DIRECTION('',(0.E0,1.E0,0.E0));
++#3783=VECTOR('',#3782,6.875E-1);
++#3784=CARTESIAN_POINT('',(1.35E1,0.E0,6.875E-1));
++#3785=LINE('',#3784,#3783);
++#3786=DIRECTION('',(0.E0,1.E0,0.E0));
++#3787=VECTOR('',#3786,6.875E-1);
++#3788=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));
++#3789=LINE('',#3788,#3787);
++#3790=DIRECTION('',(0.E0,1.E0,0.E0));
++#3791=VECTOR('',#3790,6.875E-1);
++#3792=CARTESIAN_POINT('',(1.65E1,0.E0,1.8125E0));
++#3793=LINE('',#3792,#3791);
++#3794=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3795=VECTOR('',#3794,3.E0);
++#3796=CARTESIAN_POINT('',(1.65E1,6.875E-1,6.875E-1));
++#3797=LINE('',#3796,#3795);
++#3798=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.25E0));
++#3799=DIRECTION('',(0.E0,1.E0,0.E0));
++#3800=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3801=AXIS2_PLACEMENT_3D('',#3798,#3799,#3800);
++#3803=DIRECTION('',(1.E0,0.E0,0.E0));
++#3804=VECTOR('',#3803,3.E0);
++#3805=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8125E0));
++#3806=LINE('',#3805,#3804);
++#3807=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.25E0));
++#3808=DIRECTION('',(0.E0,1.E0,0.E0));
++#3809=DIRECTION('',(0.E0,0.E0,1.E0));
++#3810=AXIS2_PLACEMENT_3D('',#3807,#3808,#3809);
++#3812=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3813=VECTOR('',#3812,4.263248410977E0);
++#3814=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,4.046865146430E0));
++#3815=LINE('',#3814,#3813);
++#3816=CARTESIAN_POINT('',(1.944696065761E1,6.875E-1,1.645354088550E0));
++#3817=DIRECTION('',(0.E0,1.E0,0.E0));
++#3818=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3819=AXIS2_PLACEMENT_3D('',#3816,#3817,#3818);
++#3821=CARTESIAN_POINT('',(1.65E1,6.875E-1,7.5E0));
++#3822=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3823=DIRECTION('',(4.496088413988E-1,0.E0,-8.932255536739E-1));
++#3824=AXIS2_PLACEMENT_3D('',#3821,#3822,#3823);
++#3826=CARTESIAN_POINT('',(2.239E1,6.875E-1,4.5E0));
++#3827=DIRECTION('',(0.E0,1.E0,0.E0));
++#3828=DIRECTION('',(-8.910741301059E-1,0.E0,4.538577912254E-1));
++#3829=AXIS2_PLACEMENT_3D('',#3826,#3827,#3828);
++#3831=DIRECTION('',(-1.033516706560E-14,1.E0,2.583791766400E-14));
++#3832=VECTOR('',#3831,6.875E-1);
++#3833=CARTESIAN_POINT('',(2.321497295992E1,0.E0,4.912826677187E0));
++#3834=LINE('',#3833,#3832);
++#3835=CARTESIAN_POINT('',(2.254426323641E1,0.E0,4.577195232320E0));
++#3836=DIRECTION('',(0.E0,1.E0,0.E0));
++#3837=DIRECTION('',(8.942796313519E-1,0.E0,4.475085931567E-1));
++#3838=AXIS2_PLACEMENT_3D('',#3835,#3836,#3837);
++#3840=DIRECTION('',(0.E0,1.E0,0.E0));
++#3841=VECTOR('',#3840,6.875E-1);
++#3842=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));
++#3843=LINE('',#3842,#3841);
++#3844=CARTESIAN_POINT('',(2.254426323641E1,6.875E-1,4.577195232320E0));
++#3845=DIRECTION('',(0.E0,-1.E0,0.E0));
++#3846=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#3847=AXIS2_PLACEMENT_3D('',#3844,#3845,#3846);
++#3849=DIRECTION('',(-1.550275059840E-14,1.E0,-2.067033413120E-14));
++#3850=VECTOR('',#3849,6.875E-1);
++#3851=CARTESIAN_POINT('',(2.156798411498E1,0.E0,4.918683812405E0));
++#3852=LINE('',#3851,#3850);
++#3853=DIRECTION('',(1.550275059840E-14,1.E0,0.E0));
++#3854=VECTOR('',#3853,6.875E-1);
++#3855=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.419779663480E0));
++#3856=LINE('',#3855,#3854);
++#3857=DIRECTION('',(0.E0,1.E0,0.E0));
++#3858=VECTOR('',#3857,6.875E-1);
++#3859=CARTESIAN_POINT('',(2.006002146101E1,0.E0,1.032293285145E0));
++#3860=LINE('',#3859,#3858);
++#3861=DIRECTION('',(0.E0,1.E0,0.E0));
++#3862=VECTOR('',#3861,6.875E-1);
++#3863=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));
++#3864=LINE('',#3863,#3862);
++#3865=DIRECTION('',(0.E0,1.E0,0.E0));
++#3866=VECTOR('',#3865,6.875E-1);
++#3867=CARTESIAN_POINT('',(2.33125E1,0.E0,1.35E1));
++#3868=LINE('',#3867,#3866);
++#3869=DIRECTION('',(0.E0,1.E0,0.E0));
++#3870=VECTOR('',#3869,6.875E-1);
++#3871=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));
++#3872=LINE('',#3871,#3870);
++#3873=DIRECTION('',(0.E0,1.E0,0.E0));
++#3874=VECTOR('',#3873,6.875E-1);
++#3875=CARTESIAN_POINT('',(2.21875E1,0.E0,1.65E1));
++#3876=LINE('',#3875,#3874);
++#3877=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3878=VECTOR('',#3877,3.E0);
++#3879=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.65E1));
++#3880=LINE('',#3879,#3878);
++#3881=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.35E1));
++#3882=DIRECTION('',(0.E0,1.E0,0.E0));
++#3883=DIRECTION('',(1.E0,0.E0,0.E0));
++#3884=AXIS2_PLACEMENT_3D('',#3881,#3882,#3883);
++#3886=DIRECTION('',(0.E0,0.E0,1.E0));
++#3887=VECTOR('',#3886,3.E0);
++#3888=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.35E1));
++#3889=LINE('',#3888,#3887);
++#3890=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.65E1));
++#3891=DIRECTION('',(0.E0,1.E0,0.E0));
++#3892=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3893=AXIS2_PLACEMENT_3D('',#3890,#3891,#3892);
++#3895=DIRECTION('',(0.E0,1.E0,0.E0));
++#3896=VECTOR('',#3895,6.875E-1);
++#3897=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));
++#3898=LINE('',#3897,#3896);
++#3899=DIRECTION('',(0.E0,1.E0,0.E0));
++#3900=VECTOR('',#3899,6.875E-1);
++#3901=CARTESIAN_POINT('',(2.33125E1,0.E0,1.95E1));
++#3902=LINE('',#3901,#3900);
++#3903=DIRECTION('',(0.E0,1.E0,0.E0));
++#3904=VECTOR('',#3903,6.875E-1);
++#3905=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));
++#3906=LINE('',#3905,#3904);
++#3907=DIRECTION('',(0.E0,1.E0,0.E0));
++#3908=VECTOR('',#3907,6.875E-1);
++#3909=CARTESIAN_POINT('',(2.21875E1,0.E0,2.25E1));
++#3910=LINE('',#3909,#3908);
++#3911=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3912=VECTOR('',#3911,3.E0);
++#3913=CARTESIAN_POINT('',(2.33125E1,6.875E-1,2.25E1));
++#3914=LINE('',#3913,#3912);
++#3915=CARTESIAN_POINT('',(2.275E1,6.875E-1,1.95E1));
++#3916=DIRECTION('',(0.E0,1.E0,0.E0));
++#3917=DIRECTION('',(1.E0,0.E0,0.E0));
++#3918=AXIS2_PLACEMENT_3D('',#3915,#3916,#3917);
++#3920=DIRECTION('',(0.E0,0.E0,1.E0));
++#3921=VECTOR('',#3920,3.E0);
++#3922=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.95E1));
++#3923=LINE('',#3922,#3921);
++#3924=CARTESIAN_POINT('',(2.275E1,6.875E-1,2.25E1));
++#3925=DIRECTION('',(0.E0,1.E0,0.E0));
++#3926=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3927=AXIS2_PLACEMENT_3D('',#3924,#3925,#3926);
++#3929=DIRECTION('',(0.E0,1.E0,0.E0));
++#3930=VECTOR('',#3929,6.875E-1);
++#3931=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));
++#3932=LINE('',#3931,#3930);
++#3933=DIRECTION('',(0.E0,1.E0,0.E0));
++#3934=VECTOR('',#3933,6.875E-1);
++#3935=CARTESIAN_POINT('',(1.35E1,0.E0,8.5E0));
++#3936=LINE('',#3935,#3934);
++#3937=DIRECTION('',(0.E0,1.E0,0.E0));
++#3938=VECTOR('',#3937,6.875E-1);
++#3939=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));
++#3940=LINE('',#3939,#3938);
++#3941=DIRECTION('',(0.E0,1.E0,0.E0));
++#3942=VECTOR('',#3941,6.875E-1);
++#3943=CARTESIAN_POINT('',(1.65E1,0.E0,9.5E0));
++#3944=LINE('',#3943,#3942);
++#3945=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3946=VECTOR('',#3945,3.E0);
++#3947=CARTESIAN_POINT('',(1.65E1,6.875E-1,8.5E0));
++#3948=LINE('',#3947,#3946);
++#3949=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.E0));
++#3950=DIRECTION('',(0.E0,1.E0,0.E0));
++#3951=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3952=AXIS2_PLACEMENT_3D('',#3949,#3950,#3951);
++#3954=DIRECTION('',(1.E0,0.E0,0.E0));
++#3955=VECTOR('',#3954,3.E0);
++#3956=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.5E0));
++#3957=LINE('',#3956,#3955);
++#3958=CARTESIAN_POINT('',(1.65E1,6.875E-1,9.E0));
++#3959=DIRECTION('',(0.E0,1.E0,0.E0));
++#3960=DIRECTION('',(0.E0,0.E0,1.E0));
++#3961=AXIS2_PLACEMENT_3D('',#3958,#3959,#3960);
++#3963=DIRECTION('',(0.E0,1.E0,0.E0));
++#3964=VECTOR('',#3963,6.875E-1);
++#3965=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));
++#3966=LINE('',#3965,#3964);
++#3967=DIRECTION('',(0.E0,1.E0,0.E0));
++#3968=VECTOR('',#3967,6.875E-1);
++#3969=CARTESIAN_POINT('',(1.35E1,0.E0,1.75625E1));
++#3970=LINE('',#3969,#3968);
++#3971=DIRECTION('',(0.E0,1.E0,0.E0));
++#3972=VECTOR('',#3971,6.875E-1);
++#3973=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));
++#3974=LINE('',#3973,#3972);
++#3975=DIRECTION('',(0.E0,1.E0,0.E0));
++#3976=VECTOR('',#3975,6.875E-1);
++#3977=CARTESIAN_POINT('',(1.65E1,0.E0,1.84375E1));
++#3978=LINE('',#3977,#3976);
++#3979=DIRECTION('',(-1.E0,0.E0,0.E0));
++#3980=VECTOR('',#3979,3.E0);
++#3981=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.75625E1));
++#3982=LINE('',#3981,#3980);
++#3983=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8E1));
++#3984=DIRECTION('',(0.E0,1.E0,0.E0));
++#3985=DIRECTION('',(0.E0,0.E0,-1.E0));
++#3986=AXIS2_PLACEMENT_3D('',#3983,#3984,#3985);
++#3988=DIRECTION('',(1.E0,0.E0,0.E0));
++#3989=VECTOR('',#3988,3.E0);
++#3990=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.84375E1));
++#3991=LINE('',#3990,#3989);
++#3992=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.8E1));
++#3993=DIRECTION('',(0.E0,1.E0,0.E0));
++#3994=DIRECTION('',(0.E0,0.E0,1.E0));
++#3995=AXIS2_PLACEMENT_3D('',#3992,#3993,#3994);
++#3997=DIRECTION('',(0.E0,1.E0,0.E0));
++#3998=VECTOR('',#3997,6.875E-1);
++#3999=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));
++#4000=LINE('',#3999,#3998);
++#4001=DIRECTION('',(0.E0,1.E0,0.E0));
++#4002=VECTOR('',#4001,6.875E-1);
++#4003=CARTESIAN_POINT('',(1.65E1,0.E0,3.01875E1));
++#4004=LINE('',#4003,#4002);
++#4005=DIRECTION('',(0.E0,1.E0,0.E0));
++#4006=VECTOR('',#4005,6.875E-1);
++#4007=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));
++#4008=LINE('',#4007,#4006);
++#4009=DIRECTION('',(0.E0,1.E0,0.E0));
++#4010=VECTOR('',#4009,6.875E-1);
++#4011=CARTESIAN_POINT('',(1.35E1,0.E0,3.13125E1));
++#4012=LINE('',#4011,#4010);
++#4013=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4014=VECTOR('',#4013,3.E0);
++#4015=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.13125E1));
++#4016=LINE('',#4015,#4014);
++#4017=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.075E1));
++#4018=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4019=DIRECTION('',(0.E0,0.E0,-1.E0));
++#4020=AXIS2_PLACEMENT_3D('',#4017,#4018,#4019);
++#4022=DIRECTION('',(1.E0,0.E0,0.E0));
++#4023=VECTOR('',#4022,3.E0);
++#4024=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.01875E1));
++#4025=LINE('',#4024,#4023);
++#4026=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.075E1));
++#4027=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4028=DIRECTION('',(0.E0,0.E0,1.E0));
++#4029=AXIS2_PLACEMENT_3D('',#4026,#4027,#4028);
++#4031=CARTESIAN_POINT('',(2.239E1,6.875E-1,2.75E1));
++#4032=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4033=DIRECTION('',(-8.910741301059E-1,0.E0,-4.538577912254E-1));
++#4034=AXIS2_PLACEMENT_3D('',#4031,#4032,#4033);
++#4036=CARTESIAN_POINT('',(1.65E1,6.875E-1,2.45E1));
++#4037=DIRECTION('',(0.E0,1.E0,0.E0));
++#4038=DIRECTION('',(4.496088413988E-1,0.E0,8.932255536739E-1));
++#4039=AXIS2_PLACEMENT_3D('',#4036,#4037,#4038);
++#4041=CARTESIAN_POINT('',(1.944696065761E1,6.875E-1,3.035464591145E1));
++#4042=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4043=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#4044=AXIS2_PLACEMENT_3D('',#4041,#4042,#4043);
++#4046=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#4047=VECTOR('',#4046,4.263248410977E0);
++#4048=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,2.795313485357E1));
++#4049=LINE('',#4048,#4047);
++#4050=DIRECTION('',(0.E0,1.E0,0.E0));
++#4051=VECTOR('',#4050,6.875E-1);
++#4052=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));
++#4053=LINE('',#4052,#4051);
++#4054=CARTESIAN_POINT('',(2.254426323641E1,0.E0,2.742280476768E1));
++#4055=DIRECTION('',(0.E0,1.E0,0.E0));
++#4056=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#4057=AXIS2_PLACEMENT_3D('',#4054,#4055,#4056);
++#4059=DIRECTION('',(0.E0,1.E0,2.067033413120E-14));
++#4060=VECTOR('',#4059,6.875E-1);
++#4061=CARTESIAN_POINT('',(2.321497295992E1,0.E0,2.708717332281E1));
++#4062=LINE('',#4061,#4060);
++#4063=CARTESIAN_POINT('',(2.254426323641E1,6.875E-1,2.742280476768E1));
++#4064=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4065=DIRECTION('',(8.942796313519E-1,0.E0,-4.475085931567E-1));
++#4066=AXIS2_PLACEMENT_3D('',#4063,#4064,#4065);
++#4068=DIRECTION('',(0.E0,1.E0,0.E0));
++#4069=VECTOR('',#4068,6.875E-1);
++#4070=CARTESIAN_POINT('',(2.006002146101E1,0.E0,3.096770671486E1));
++#4071=LINE('',#4070,#4069);
++#4072=DIRECTION('',(1.033516706560E-14,1.E0,0.E0));
++#4073=VECTOR('',#4072,6.875E-1);
++#4074=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.958022033652E1));
++#4075=LINE('',#4074,#4073);
++#4076=DIRECTION('',(-2.067033413120E-14,1.E0,3.100550119680E-14));
++#4077=VECTOR('',#4076,6.875E-1);
++#4078=CARTESIAN_POINT('',(2.156798411498E1,0.E0,2.708131618759E1));
++#4079=LINE('',#4078,#4077);
++#4080=DIRECTION('',(0.E0,1.E0,0.E0));
++#4081=VECTOR('',#4080,6.875E-1);
++#4082=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));
++#4083=LINE('',#4082,#4081);
++#4084=CARTESIAN_POINT('',(2.13075E1,6.875E-1,7.81E0));
++#4085=DIRECTION('',(0.E0,1.E0,0.E0));
++#4086=DIRECTION('',(0.E0,0.E0,1.E0));
++#4087=AXIS2_PLACEMENT_3D('',#4084,#4085,#4086);
++#4089=DIRECTION('',(0.E0,1.E0,0.E0));
++#4090=VECTOR('',#4089,6.875E-1);
++#4091=CARTESIAN_POINT('',(2.21875E1,0.E0,7.81E0));
++#4092=LINE('',#4091,#4090);
++#4093=CARTESIAN_POINT('',(2.13075E1,0.E0,7.81E0));
++#4094=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4095=DIRECTION('',(1.E0,0.E0,0.E0));
++#4096=AXIS2_PLACEMENT_3D('',#4093,#4094,#4095);
++#4098=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4099=VECTOR('',#4098,6.875E-1);
++#4100=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));
++#4101=LINE('',#4100,#4099);
++#4102=CARTESIAN_POINT('',(2.05675E1,6.875E-1,9.57E0));
++#4103=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4104=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4105=AXIS2_PLACEMENT_3D('',#4102,#4103,#4104);
++#4107=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4108=VECTOR('',#4107,6.875E-1);
++#4109=CARTESIAN_POINT('',(2.05675E1,6.875E-1,8.69E0));
++#4110=LINE('',#4109,#4108);
++#4111=CARTESIAN_POINT('',(2.05675E1,0.E0,9.57E0));
++#4112=DIRECTION('',(0.E0,1.E0,0.E0));
++#4113=DIRECTION('',(0.E0,0.E0,-1.E0));
++#4114=AXIS2_PLACEMENT_3D('',#4111,#4112,#4113);
++#4116=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4117=VECTOR('',#4116,6.875E-1);
++#4118=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));
++#4119=LINE('',#4118,#4117);
++#4120=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.037E1));
++#4121=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4122=DIRECTION('',(0.E0,0.E0,1.E0));
++#4123=AXIS2_PLACEMENT_3D('',#4120,#4121,#4122);
++#4125=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4126=VECTOR('',#4125,6.875E-1);
++#4127=CARTESIAN_POINT('',(1.96875E1,6.875E-1,1.037E1));
++#4128=LINE('',#4127,#4126);
++#4129=CARTESIAN_POINT('',(2.05675E1,0.E0,1.037E1));
++#4130=DIRECTION('',(0.E0,1.E0,0.E0));
++#4131=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4132=AXIS2_PLACEMENT_3D('',#4129,#4130,#4131);
++#4134=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4135=VECTOR('',#4134,6.875E-1);
++#4136=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));
++#4137=LINE('',#4136,#4135);
++#4138=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.037E1));
++#4139=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4140=DIRECTION('',(1.E0,0.E0,0.E0));
++#4141=AXIS2_PLACEMENT_3D('',#4138,#4139,#4140);
++#4143=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4144=VECTOR('',#4143,6.875E-1);
++#4145=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.125E1));
++#4146=LINE('',#4145,#4144);
++#4147=CARTESIAN_POINT('',(2.44325E1,0.E0,1.037E1));
++#4148=DIRECTION('',(0.E0,1.E0,0.E0));
++#4149=DIRECTION('',(0.E0,0.E0,1.E0));
++#4150=AXIS2_PLACEMENT_3D('',#4147,#4148,#4149);
++#4152=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4153=VECTOR('',#4152,6.875E-1);
++#4154=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));
++#4155=LINE('',#4154,#4153);
++#4156=CARTESIAN_POINT('',(2.44325E1,6.875E-1,9.57E0));
++#4157=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4158=DIRECTION('',(0.E0,0.E0,-1.E0));
++#4159=AXIS2_PLACEMENT_3D('',#4156,#4157,#4158);
++#4161=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4162=VECTOR('',#4161,6.875E-1);
++#4163=CARTESIAN_POINT('',(2.53125E1,6.875E-1,9.57E0));
++#4164=LINE('',#4163,#4162);
++#4165=CARTESIAN_POINT('',(2.44325E1,0.E0,9.57E0));
++#4166=DIRECTION('',(0.E0,1.E0,0.E0));
++#4167=DIRECTION('',(1.E0,0.E0,0.E0));
++#4168=AXIS2_PLACEMENT_3D('',#4165,#4166,#4167);
++#4170=DIRECTION('',(0.E0,1.E0,0.E0));
++#4171=VECTOR('',#4170,6.875E-1);
++#4172=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));
++#4173=LINE('',#4172,#4171);
++#4174=CARTESIAN_POINT('',(2.419E1,6.875E-1,7.81E0));
++#4175=DIRECTION('',(0.E0,1.E0,0.E0));
++#4176=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4177=AXIS2_PLACEMENT_3D('',#4174,#4175,#4176);
++#4179=DIRECTION('',(0.E0,1.E0,0.E0));
++#4180=VECTOR('',#4179,6.875E-1);
++#4181=CARTESIAN_POINT('',(2.419E1,0.E0,8.69E0));
++#4182=LINE('',#4181,#4180);
++#4183=CARTESIAN_POINT('',(2.419E1,0.E0,7.81E0));
++#4184=DIRECTION('',(0.E0,-1.E0,0.E0));
++#4185=DIRECTION('',(0.E0,0.E0,1.E0));
++#4186=AXIS2_PLACEMENT_3D('',#4183,#4184,#4185);
++#4188=DIRECTION('',(0.E0,1.E0,1.033516706560E-14));
++#4189=VECTOR('',#4188,6.875E-1);
++#4190=CARTESIAN_POINT('',(2.331E1,0.E0,7.5E0));
++#4191=LINE('',#4190,#4189);
++#4192=DIRECTION('',(0.E0,1.E0,0.E0));
++#4193=VECTOR('',#4192,6.875E-1);
++#4194=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));
++#4195=LINE('',#4194,#4193);
++#4196=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4197=VECTOR('',#4196,2.425E-1);
++#4198=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));
++#4199=LINE('',#4198,#4197);
++#4200=DIRECTION('',(0.E0,0.E0,-1.E0));
++#4201=VECTOR('',#4200,3.1E-1);
++#4202=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.81E0));
++#4203=LINE('',#4202,#4201);
++#4204=CARTESIAN_POINT('',(2.274875E1,6.875E-1,7.5E0));
++#4205=DIRECTION('',(0.E0,1.E0,0.E0));
++#4206=DIRECTION('',(1.E0,0.E0,0.E0));
++#4207=AXIS2_PLACEMENT_3D('',#4204,#4205,#4206);
++#4209=DIRECTION('',(0.E0,0.E0,1.E0));
++#4210=VECTOR('',#4209,3.1E-1);
++#4211=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.5E0));
++#4212=LINE('',#4211,#4210);
++#4213=DIRECTION('',(-1.E0,0.E0,0.E0));
++#4214=VECTOR('',#4213,7.4E-1);
++#4215=CARTESIAN_POINT('',(2.13075E1,6.875E-1,8.69E0));
++#4216=LINE('',#4215,#4214);
++#4217=DIRECTION('',(0.E0,0.E0,1.E0));
++#4218=VECTOR('',#4217,8.E-1);
++#4219=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));
++#4220=LINE('',#4219,#4218);
++#4221=DIRECTION('',(1.E0,0.E0,0.E0));
++#4222=VECTOR('',#4221,3.865E0);
++#4223=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));
++#4224=LINE('',#4223,#4222);
++#4225=DIRECTION('',(0.E0,0.E0,-1.E0));
++#4226=VECTOR('',#4225,8.E-1);
++#4227=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));
++#4228=LINE('',#4227,#4226);
++#4229=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));
++#4230=CARTESIAN_POINT('',(2.4E1,1.5E0,2.8E1));
++#4231=VERTEX_POINT('',#4229);
++#4232=VERTEX_POINT('',#4230);
++#4233=CARTESIAN_POINT('',(2.E1,0.E0,3.2E1));
++#4234=CARTESIAN_POINT('',(2.E1,1.5E0,3.2E1));
++#4235=VERTEX_POINT('',#4233);
++#4236=VERTEX_POINT('',#4234);
++#4237=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));
++#4238=CARTESIAN_POINT('',(2.E1,1.5E0,0.E0));
++#4239=VERTEX_POINT('',#4237);
++#4240=VERTEX_POINT('',#4238);
++#4241=CARTESIAN_POINT('',(2.4E1,0.E0,4.E0));
++#4242=CARTESIAN_POINT('',(2.4E1,1.5E0,4.E0));
++#4243=VERTEX_POINT('',#4241);
++#4244=VERTEX_POINT('',#4242);
++#4245=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));
++#4246=CARTESIAN_POINT('',(4.E0,1.5E0,3.2E1));
++#4247=VERTEX_POINT('',#4245);
++#4248=VERTEX_POINT('',#4246);
++#4249=CARTESIAN_POINT('',(0.E0,0.E0,2.8E1));
++#4250=CARTESIAN_POINT('',(0.E0,1.5E0,2.8E1));
++#4251=VERTEX_POINT('',#4249);
++#4252=VERTEX_POINT('',#4250);
++#4253=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
++#4254=CARTESIAN_POINT('',(0.E0,1.5E0,4.E0));
++#4255=VERTEX_POINT('',#4253);
++#4256=VERTEX_POINT('',#4254);
++#4257=CARTESIAN_POINT('',(4.E0,0.E0,0.E0));
++#4258=CARTESIAN_POINT('',(4.E0,1.5E0,0.E0));
++#4259=VERTEX_POINT('',#4257);
++#4260=VERTEX_POINT('',#4258);
++#4261=CARTESIAN_POINT('',(7.5E0,1.5E0,2.5E0));
++#4262=CARTESIAN_POINT('',(7.5E0,0.E0,2.5E0));
++#4263=VERTEX_POINT('',#4261);
++#4264=VERTEX_POINT('',#4262);
++#4265=CARTESIAN_POINT('',(1.65E1,1.5E0,2.5E0));
++#4266=CARTESIAN_POINT('',(1.65E1,0.E0,2.5E0));
++#4267=VERTEX_POINT('',#4265);
++#4268=VERTEX_POINT('',#4266);
++#4269=CARTESIAN_POINT('',(7.5E0,1.5E0,2.95E1));
++#4270=CARTESIAN_POINT('',(7.5E0,0.E0,2.95E1));
++#4271=VERTEX_POINT('',#4269);
++#4272=VERTEX_POINT('',#4270);
++#4273=CARTESIAN_POINT('',(2.5E0,1.5E0,2.45E1));
++#4274=CARTESIAN_POINT('',(2.5E0,0.E0,2.45E1));
++#4275=VERTEX_POINT('',#4273);
++#4276=VERTEX_POINT('',#4274);
++#4277=CARTESIAN_POINT('',(2.15E1,1.5E0,2.45E1));
++#4278=CARTESIAN_POINT('',(2.15E1,0.E0,2.45E1));
++#4279=VERTEX_POINT('',#4277);
++#4280=VERTEX_POINT('',#4278);
++#4281=CARTESIAN_POINT('',(1.65E1,1.5E0,2.95E1));
++#4282=CARTESIAN_POINT('',(1.65E1,0.E0,2.95E1));
++#4283=VERTEX_POINT('',#4281);
++#4284=VERTEX_POINT('',#4282);
++#4285=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));
++#4286=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));
++#4287=VERTEX_POINT('',#4285);
++#4288=VERTEX_POINT('',#4286);
++#4289=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));
++#4290=VERTEX_POINT('',#4289);
++#4291=CARTESIAN_POINT('',(5.E0,1.15E1,1.E1));
++#4292=CARTESIAN_POINT('',(3.E0,1.15E1,1.E1));
++#4293=VERTEX_POINT('',#4291);
++#4294=VERTEX_POINT('',#4292);
++#4295=CARTESIAN_POINT('',(-2.E0,2.5E0,1.E1));
++#4296=VERTEX_POINT('',#4295);
++#4297=CARTESIAN_POINT('',(-2.E0,1.5E0,1.E1));
++#4298=VERTEX_POINT('',#4297);
++#4299=CARTESIAN_POINT('',(-2.E0,0.E0,8.E0));
++#4300=VERTEX_POINT('',#4299);
++#4301=CARTESIAN_POINT('',(2.5E0,1.5E0,1.325E1));
++#4302=CARTESIAN_POINT('',(2.5E0,0.E0,1.325E1));
++#4303=VERTEX_POINT('',#4301);
++#4304=VERTEX_POINT('',#4302);
++#4305=CARTESIAN_POINT('',(3.5E0,1.5E0,1.225E1));
++#4306=CARTESIAN_POINT('',(3.5E0,0.E0,1.225E1));
++#4307=VERTEX_POINT('',#4305);
++#4308=VERTEX_POINT('',#4306);
++#4309=CARTESIAN_POINT('',(0.E0,0.E0,1.325E1));
++#4310=CARTESIAN_POINT('',(0.E0,1.5E0,1.325E1));
++#4311=VERTEX_POINT('',#4309);
++#4312=VERTEX_POINT('',#4310);
++#4313=CARTESIAN_POINT('',(-1.E0,0.E0,1.225E1));
++#4314=CARTESIAN_POINT('',(-1.E0,1.5E0,1.225E1));
++#4315=VERTEX_POINT('',#4313);
++#4316=VERTEX_POINT('',#4314);
++#4317=CARTESIAN_POINT('',(0.E0,1.5E0,7.E0));
++#4318=CARTESIAN_POINT('',(0.E0,0.E0,7.E0));
++#4319=VERTEX_POINT('',#4317);
++#4320=VERTEX_POINT('',#4318);
++#4321=CARTESIAN_POINT('',(-1.E0,1.5E0,8.E0));
++#4322=CARTESIAN_POINT('',(-1.E0,0.E0,8.E0));
++#4323=VERTEX_POINT('',#4321);
++#4324=VERTEX_POINT('',#4322);
++#4325=CARTESIAN_POINT('',(3.531373033403E0,1.5E0,8.E0));
++#4326=CARTESIAN_POINT('',(3.531373033403E0,0.E0,8.E0));
++#4327=VERTEX_POINT('',#4325);
++#4328=VERTEX_POINT('',#4326);
++#4329=CARTESIAN_POINT('',(2.539216291754E0,1.5E0,6.875E0));
++#4330=CARTESIAN_POINT('',(2.539216291754E0,0.E0,6.875E0));
++#4331=VERTEX_POINT('',#4329);
++#4332=VERTEX_POINT('',#4330);
++#4333=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));
++#4334=CARTESIAN_POINT('',(5.E0,1.5E0,1.175E1));
++#4335=VERTEX_POINT('',#4333);
++#4336=VERTEX_POINT('',#4334);
++#4337=CARTESIAN_POINT('',(4.5E0,0.E0,1.225E1));
++#4338=CARTESIAN_POINT('',(4.5E0,1.5E0,1.225E1));
++#4339=VERTEX_POINT('',#4337);
++#4340=VERTEX_POINT('',#4338);
++#4341=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));
++#4342=CARTESIAN_POINT('',(-1.5E0,1.5E0,1.225E1));
++#4343=VERTEX_POINT('',#4341);
++#4344=VERTEX_POINT('',#4342);
++#4345=CARTESIAN_POINT('',(-2.E0,0.E0,1.175E1));
++#4346=CARTESIAN_POINT('',(-2.E0,1.5E0,1.175E1));
++#4347=VERTEX_POINT('',#4345);
++#4348=VERTEX_POINT('',#4346);
++#4349=CARTESIAN_POINT('',(4.095E0,1.1125E1,9.E0));
++#4350=CARTESIAN_POINT('',(3.905E0,1.1125E1,9.E0));
++#4351=VERTEX_POINT('',#4349);
++#4352=VERTEX_POINT('',#4350);
++#4353=CARTESIAN_POINT('',(4.095E0,1.15E1,9.E0));
++#4354=CARTESIAN_POINT('',(3.905E0,1.15E1,9.E0));
++#4355=VERTEX_POINT('',#4353);
++#4356=VERTEX_POINT('',#4354);
++#4357=CARTESIAN_POINT('',(3.929917478528E0,1.125E1,9.132582521472E0));
++#4358=CARTESIAN_POINT('',(3.804917478528E0,1.125E1,9.132582521472E0));
++#4359=VERTEX_POINT('',#4357);
++#4360=VERTEX_POINT('',#4358);
++#4361=CARTESIAN_POINT('',(3.929917478528E0,1.15E1,9.132582521472E0));
++#4362=CARTESIAN_POINT('',(3.804917478528E0,1.15E1,9.132582521472E0));
++#4363=VERTEX_POINT('',#4361);
++#4364=VERTEX_POINT('',#4362);
++#4365=CARTESIAN_POINT('',(6.45E0,1.192264973081E0,2.975E1));
++#4366=CARTESIAN_POINT('',(6.55E0,1.25E0,2.975E1));
++#4367=VERTEX_POINT('',#4365);
++#4368=VERTEX_POINT('',#4366);
++#4369=CARTESIAN_POINT('',(6.35E0,1.25E0,2.975E1));
++#4370=VERTEX_POINT('',#4369);
++#4371=CARTESIAN_POINT('',(6.35E0,1.5E0,2.975E1));
++#4372=CARTESIAN_POINT('',(6.55E0,1.5E0,2.975E1));
++#4373=VERTEX_POINT('',#4371);
++#4374=VERTEX_POINT('',#4372);
++#4375=CARTESIAN_POINT('',(7.45E0,1.192264973081E0,2.975E1));
++#4376=CARTESIAN_POINT('',(7.55E0,1.25E0,2.975E1));
++#4377=VERTEX_POINT('',#4375);
++#4378=VERTEX_POINT('',#4376);
++#4379=CARTESIAN_POINT('',(7.35E0,1.25E0,2.975E1));
++#4380=VERTEX_POINT('',#4379);
++#4381=CARTESIAN_POINT('',(7.35E0,1.5E0,2.975E1));
++#4382=CARTESIAN_POINT('',(7.55E0,1.5E0,2.975E1));
++#4383=VERTEX_POINT('',#4381);
++#4384=VERTEX_POINT('',#4382);
++#4385=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));
++#4386=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));
++#4387=VERTEX_POINT('',#4385);
++#4388=VERTEX_POINT('',#4386);
++#4389=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));
++#4390=VERTEX_POINT('',#4389);
++#4391=CARTESIAN_POINT('',(1.9E1,1.15E1,1.E1));
++#4392=CARTESIAN_POINT('',(2.1E1,1.15E1,1.E1));
++#4393=VERTEX_POINT('',#4391);
++#4394=VERTEX_POINT('',#4392);
++#4395=CARTESIAN_POINT('',(2.6E1,2.5E0,1.E1));
++#4396=VERTEX_POINT('',#4395);
++#4397=CARTESIAN_POINT('',(2.6E1,1.5E0,1.E1));
++#4398=VERTEX_POINT('',#4397);
++#4399=CARTESIAN_POINT('',(2.6E1,0.E0,8.E0));
++#4400=VERTEX_POINT('',#4399);
++#4401=CARTESIAN_POINT('',(2.4E1,1.5E0,1.325E1));
++#4402=CARTESIAN_POINT('',(2.4E1,0.E0,1.325E1));
++#4403=VERTEX_POINT('',#4401);
++#4404=VERTEX_POINT('',#4402);
++#4405=CARTESIAN_POINT('',(2.5E1,1.5E0,1.225E1));
++#4406=CARTESIAN_POINT('',(2.5E1,0.E0,1.225E1));
++#4407=VERTEX_POINT('',#4405);
++#4408=VERTEX_POINT('',#4406);
++#4409=CARTESIAN_POINT('',(2.15E1,0.E0,1.325E1));
++#4410=CARTESIAN_POINT('',(2.15E1,1.5E0,1.325E1));
++#4411=VERTEX_POINT('',#4409);
++#4412=VERTEX_POINT('',#4410);
++#4413=CARTESIAN_POINT('',(2.05E1,0.E0,1.225E1));
++#4414=CARTESIAN_POINT('',(2.05E1,1.5E0,1.225E1));
++#4415=VERTEX_POINT('',#4413);
++#4416=VERTEX_POINT('',#4414);
++#4417=CARTESIAN_POINT('',(2.4E1,0.E0,7.E0));
++#4418=CARTESIAN_POINT('',(2.4E1,1.5E0,7.E0));
++#4419=VERTEX_POINT('',#4417);
++#4420=VERTEX_POINT('',#4418);
++#4421=CARTESIAN_POINT('',(2.5E1,0.E0,8.E0));
++#4422=CARTESIAN_POINT('',(2.5E1,1.5E0,8.E0));
++#4423=VERTEX_POINT('',#4421);
++#4424=VERTEX_POINT('',#4422);
++#4425=CARTESIAN_POINT('',(2.046862696660E1,0.E0,8.E0));
++#4426=CARTESIAN_POINT('',(2.046862696660E1,1.5E0,8.E0));
++#4427=VERTEX_POINT('',#4425);
++#4428=VERTEX_POINT('',#4426);
++#4429=CARTESIAN_POINT('',(2.146078370825E1,0.E0,6.875E0));
++#4430=CARTESIAN_POINT('',(2.146078370825E1,1.5E0,6.875E0));
++#4431=VERTEX_POINT('',#4429);
++#4432=VERTEX_POINT('',#4430);
++#4433=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));
++#4434=CARTESIAN_POINT('',(1.9E1,0.E0,1.175E1));
++#4435=VERTEX_POINT('',#4433);
++#4436=VERTEX_POINT('',#4434);
++#4437=CARTESIAN_POINT('',(1.95E1,1.5E0,1.225E1));
++#4438=CARTESIAN_POINT('',(1.95E1,0.E0,1.225E1));
++#4439=VERTEX_POINT('',#4437);
++#4440=VERTEX_POINT('',#4438);
++#4441=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));
++#4442=CARTESIAN_POINT('',(2.55E1,0.E0,1.225E1));
++#4443=VERTEX_POINT('',#4441);
++#4444=VERTEX_POINT('',#4442);
++#4445=CARTESIAN_POINT('',(2.6E1,1.5E0,1.175E1));
++#4446=CARTESIAN_POINT('',(2.6E1,0.E0,1.175E1));
++#4447=VERTEX_POINT('',#4445);
++#4448=VERTEX_POINT('',#4446);
++#4449=CARTESIAN_POINT('',(1.9905E1,1.1125E1,9.E0));
++#4450=CARTESIAN_POINT('',(2.0095E1,1.1125E1,9.E0));
++#4451=VERTEX_POINT('',#4449);
++#4452=VERTEX_POINT('',#4450);
++#4453=CARTESIAN_POINT('',(1.9905E1,1.15E1,9.E0));
++#4454=CARTESIAN_POINT('',(2.0095E1,1.15E1,9.E0));
++#4455=VERTEX_POINT('',#4453);
++#4456=VERTEX_POINT('',#4454);
++#4457=CARTESIAN_POINT('',(2.007008252147E1,1.125E1,9.132582521472E0));
++#4458=CARTESIAN_POINT('',(2.019508252147E1,1.125E1,9.132582521472E0));
++#4459=VERTEX_POINT('',#4457);
++#4460=VERTEX_POINT('',#4458);
++#4461=CARTESIAN_POINT('',(2.007008252147E1,1.15E1,9.132582521472E0));
++#4462=CARTESIAN_POINT('',(2.019508252147E1,1.15E1,9.132582521472E0));
++#4463=VERTEX_POINT('',#4461);
++#4464=VERTEX_POINT('',#4462);
++#4465=CARTESIAN_POINT('',(1.755E1,1.192264973081E0,2.975E1));
++#4466=CARTESIAN_POINT('',(1.745E1,1.25E0,2.975E1));
++#4467=VERTEX_POINT('',#4465);
++#4468=VERTEX_POINT('',#4466);
++#4469=CARTESIAN_POINT('',(1.765E1,1.25E0,2.975E1));
++#4470=VERTEX_POINT('',#4469);
++#4471=CARTESIAN_POINT('',(1.765E1,1.5E0,2.975E1));
++#4472=CARTESIAN_POINT('',(1.745E1,1.5E0,2.975E1));
++#4473=VERTEX_POINT('',#4471);
++#4474=VERTEX_POINT('',#4472);
++#4475=CARTESIAN_POINT('',(1.655E1,1.192264973081E0,2.975E1));
++#4476=CARTESIAN_POINT('',(1.645E1,1.25E0,2.975E1));
++#4477=VERTEX_POINT('',#4475);
++#4478=VERTEX_POINT('',#4476);
++#4479=CARTESIAN_POINT('',(1.665E1,1.25E0,2.975E1));
++#4480=VERTEX_POINT('',#4479);
++#4481=CARTESIAN_POINT('',(1.665E1,1.5E0,2.975E1));
++#4482=CARTESIAN_POINT('',(1.645E1,1.5E0,2.975E1));
++#4483=VERTEX_POINT('',#4481);
++#4484=VERTEX_POINT('',#4482);
++#4485=CARTESIAN_POINT('',(1.3175E0,0.E0,6.E0));
++#4486=CARTESIAN_POINT('',(9.325E-1,0.E0,6.E0));
++#4487=VERTEX_POINT('',#4485);
++#4488=VERTEX_POINT('',#4486);
++#4489=CARTESIAN_POINT('',(1.3825E0,1.E0,6.E0));
++#4490=CARTESIAN_POINT('',(8.675E-1,1.E0,6.E0));
++#4491=VERTEX_POINT('',#4489);
++#4492=VERTEX_POINT('',#4490);
++#4493=CARTESIAN_POINT('',(1.3825E0,1.5E0,6.E0));
++#4494=CARTESIAN_POINT('',(8.675E-1,1.5E0,6.E0));
++#4495=VERTEX_POINT('',#4493);
++#4496=VERTEX_POINT('',#4494);
++#4497=CARTESIAN_POINT('',(1.3175E0,1.E0,6.E0));
++#4498=CARTESIAN_POINT('',(9.325E-1,1.E0,6.E0));
++#4499=VERTEX_POINT('',#4497);
++#4500=VERTEX_POINT('',#4498);
++#4501=CARTESIAN_POINT('',(1.3175E0,0.E0,1.2E1));
++#4502=CARTESIAN_POINT('',(9.325E-1,0.E0,1.2E1));
++#4503=VERTEX_POINT('',#4501);
++#4504=VERTEX_POINT('',#4502);
++#4505=CARTESIAN_POINT('',(1.3175E0,0.E0,1.8E1));
++#4506=CARTESIAN_POINT('',(9.325E-1,0.E0,1.8E1));
++#4507=VERTEX_POINT('',#4505);
++#4508=VERTEX_POINT('',#4506);
++#4509=CARTESIAN_POINT('',(1.3175E0,0.E0,2.4E1));
++#4510=CARTESIAN_POINT('',(9.325E-1,0.E0,2.4E1));
++#4511=VERTEX_POINT('',#4509);
++#4512=VERTEX_POINT('',#4510);
++#4513=CARTESIAN_POINT('',(2.30675E1,0.E0,6.E0));
++#4514=CARTESIAN_POINT('',(2.26825E1,0.E0,6.E0));
++#4515=VERTEX_POINT('',#4513);
++#4516=VERTEX_POINT('',#4514);
++#4517=CARTESIAN_POINT('',(2.30675E1,0.E0,1.2E1));
++#4518=CARTESIAN_POINT('',(2.26825E1,0.E0,1.2E1));
++#4519=VERTEX_POINT('',#4517);
++#4520=VERTEX_POINT('',#4518);
++#4521=CARTESIAN_POINT('',(2.30675E1,0.E0,1.8E1));
++#4522=CARTESIAN_POINT('',(2.26825E1,0.E0,1.8E1));
++#4523=VERTEX_POINT('',#4521);
++#4524=VERTEX_POINT('',#4522);
++#4525=CARTESIAN_POINT('',(2.30675E1,0.E0,2.4E1));
++#4526=CARTESIAN_POINT('',(2.26825E1,0.E0,2.4E1));
++#4527=VERTEX_POINT('',#4525);
++#4528=VERTEX_POINT('',#4526);
++#4529=CARTESIAN_POINT('',(1.3825E0,1.E0,1.2E1));
++#4530=CARTESIAN_POINT('',(8.675E-1,1.E0,1.2E1));
++#4531=VERTEX_POINT('',#4529);
++#4532=VERTEX_POINT('',#4530);
++#4533=CARTESIAN_POINT('',(1.3175E0,1.E0,1.2E1));
++#4534=CARTESIAN_POINT('',(9.325E-1,1.E0,1.2E1));
++#4535=VERTEX_POINT('',#4533);
++#4536=VERTEX_POINT('',#4534);
++#4537=CARTESIAN_POINT('',(1.3825E0,1.E0,1.8E1));
++#4538=CARTESIAN_POINT('',(8.675E-1,1.E0,1.8E1));
++#4539=VERTEX_POINT('',#4537);
++#4540=VERTEX_POINT('',#4538);
++#4541=CARTESIAN_POINT('',(1.3825E0,1.5E0,1.8E1));
++#4542=CARTESIAN_POINT('',(8.675E-1,1.5E0,1.8E1));
++#4543=VERTEX_POINT('',#4541);
++#4544=VERTEX_POINT('',#4542);
++#4545=CARTESIAN_POINT('',(1.3175E0,1.E0,1.8E1));
++#4546=CARTESIAN_POINT('',(9.325E-1,1.E0,1.8E1));
++#4547=VERTEX_POINT('',#4545);
++#4548=VERTEX_POINT('',#4546);
++#4549=CARTESIAN_POINT('',(1.3825E0,1.E0,2.4E1));
++#4550=CARTESIAN_POINT('',(8.675E-1,1.E0,2.4E1));
++#4551=VERTEX_POINT('',#4549);
++#4552=VERTEX_POINT('',#4550);
++#4553=CARTESIAN_POINT('',(1.3825E0,1.5E0,2.4E1));
++#4554=CARTESIAN_POINT('',(8.675E-1,1.5E0,2.4E1));
++#4555=VERTEX_POINT('',#4553);
++#4556=VERTEX_POINT('',#4554);
++#4557=CARTESIAN_POINT('',(1.3175E0,1.E0,2.4E1));
++#4558=CARTESIAN_POINT('',(9.325E-1,1.E0,2.4E1));
++#4559=VERTEX_POINT('',#4557);
++#4560=VERTEX_POINT('',#4558);
++#4561=CARTESIAN_POINT('',(2.31325E1,1.E0,6.E0));
++#4562=CARTESIAN_POINT('',(2.26175E1,1.E0,6.E0));
++#4563=VERTEX_POINT('',#4561);
++#4564=VERTEX_POINT('',#4562);
++#4565=CARTESIAN_POINT('',(2.31325E1,1.5E0,6.E0));
++#4566=CARTESIAN_POINT('',(2.26175E1,1.5E0,6.E0));
++#4567=VERTEX_POINT('',#4565);
++#4568=VERTEX_POINT('',#4566);
++#4569=CARTESIAN_POINT('',(2.30675E1,1.E0,6.E0));
++#4570=CARTESIAN_POINT('',(2.26825E1,1.E0,6.E0));
++#4571=VERTEX_POINT('',#4569);
++#4572=VERTEX_POINT('',#4570);
++#4573=CARTESIAN_POINT('',(2.31325E1,1.E0,1.2E1));
++#4574=CARTESIAN_POINT('',(2.26175E1,1.E0,1.2E1));
++#4575=VERTEX_POINT('',#4573);
++#4576=VERTEX_POINT('',#4574);
++#4577=CARTESIAN_POINT('',(2.30675E1,1.E0,1.2E1));
++#4578=CARTESIAN_POINT('',(2.26825E1,1.E0,1.2E1));
++#4579=VERTEX_POINT('',#4577);
++#4580=VERTEX_POINT('',#4578);
++#4581=CARTESIAN_POINT('',(2.31325E1,1.E0,1.8E1));
++#4582=CARTESIAN_POINT('',(2.26175E1,1.E0,1.8E1));
++#4583=VERTEX_POINT('',#4581);
++#4584=VERTEX_POINT('',#4582);
++#4585=CARTESIAN_POINT('',(2.31325E1,1.5E0,1.8E1));
++#4586=CARTESIAN_POINT('',(2.26175E1,1.5E0,1.8E1));
++#4587=VERTEX_POINT('',#4585);
++#4588=VERTEX_POINT('',#4586);
++#4589=CARTESIAN_POINT('',(2.30675E1,1.E0,1.8E1));
++#4590=CARTESIAN_POINT('',(2.26825E1,1.E0,1.8E1));
++#4591=VERTEX_POINT('',#4589);
++#4592=VERTEX_POINT('',#4590);
++#4593=CARTESIAN_POINT('',(2.31325E1,1.E0,2.4E1));
++#4594=CARTESIAN_POINT('',(2.26175E1,1.E0,2.4E1));
++#4595=VERTEX_POINT('',#4593);
++#4596=VERTEX_POINT('',#4594);
++#4597=CARTESIAN_POINT('',(2.31325E1,1.5E0,2.4E1));
++#4598=CARTESIAN_POINT('',(2.26175E1,1.5E0,2.4E1));
++#4599=VERTEX_POINT('',#4597);
++#4600=VERTEX_POINT('',#4598);
++#4601=CARTESIAN_POINT('',(2.30675E1,1.E0,2.4E1));
++#4602=CARTESIAN_POINT('',(2.26825E1,1.E0,2.4E1));
++#4603=VERTEX_POINT('',#4601);
++#4604=VERTEX_POINT('',#4602);
++#4605=CARTESIAN_POINT('',(6.1925E0,0.E0,1.25E0));
++#4606=CARTESIAN_POINT('',(5.8075E0,0.E0,1.25E0));
++#4607=VERTEX_POINT('',#4605);
++#4608=VERTEX_POINT('',#4606);
++#4609=CARTESIAN_POINT('',(6.256E0,1.E0,1.25E0));
++#4610=CARTESIAN_POINT('',(5.744E0,1.E0,1.25E0));
++#4611=VERTEX_POINT('',#4609);
++#4612=VERTEX_POINT('',#4610);
++#4613=CARTESIAN_POINT('',(6.256E0,1.5E0,1.25E0));
++#4614=CARTESIAN_POINT('',(5.744E0,1.5E0,1.25E0));
++#4615=VERTEX_POINT('',#4613);
++#4616=VERTEX_POINT('',#4614);
++#4617=CARTESIAN_POINT('',(6.1925E0,1.E0,1.25E0));
++#4618=CARTESIAN_POINT('',(5.8075E0,1.E0,1.25E0));
++#4619=VERTEX_POINT('',#4617);
++#4620=VERTEX_POINT('',#4618);
++#4621=CARTESIAN_POINT('',(1.21925E1,0.E0,1.25E0));
++#4622=CARTESIAN_POINT('',(1.18075E1,0.E0,1.25E0));
++#4623=VERTEX_POINT('',#4621);
++#4624=VERTEX_POINT('',#4622);
++#4625=CARTESIAN_POINT('',(6.1925E0,0.E0,3.075E1));
++#4626=CARTESIAN_POINT('',(5.8075E0,0.E0,3.075E1));
++#4627=VERTEX_POINT('',#4625);
++#4628=VERTEX_POINT('',#4626);
++#4629=CARTESIAN_POINT('',(1.21925E1,0.E0,3.075E1));
++#4630=CARTESIAN_POINT('',(1.18075E1,0.E0,3.075E1));
++#4631=VERTEX_POINT('',#4629);
++#4632=VERTEX_POINT('',#4630);
++#4633=CARTESIAN_POINT('',(1.81925E1,0.E0,1.25E0));
++#4634=CARTESIAN_POINT('',(1.78075E1,0.E0,1.25E0));
++#4635=VERTEX_POINT('',#4633);
++#4636=VERTEX_POINT('',#4634);
++#4637=CARTESIAN_POINT('',(1.81925E1,0.E0,3.075E1));
++#4638=CARTESIAN_POINT('',(1.78075E1,0.E0,3.075E1));
++#4639=VERTEX_POINT('',#4637);
++#4640=VERTEX_POINT('',#4638);
++#4641=CARTESIAN_POINT('',(1.2256E1,1.E0,1.25E0));
++#4642=CARTESIAN_POINT('',(1.1744E1,1.E0,1.25E0));
++#4643=VERTEX_POINT('',#4641);
++#4644=VERTEX_POINT('',#4642);
++#4645=CARTESIAN_POINT('',(1.2256E1,1.5E0,1.25E0));
++#4646=CARTESIAN_POINT('',(1.1744E1,1.5E0,1.25E0));
++#4647=VERTEX_POINT('',#4645);
++#4648=VERTEX_POINT('',#4646);
++#4649=CARTESIAN_POINT('',(1.21925E1,1.E0,1.25E0));
++#4650=CARTESIAN_POINT('',(1.18075E1,1.E0,1.25E0));
++#4651=VERTEX_POINT('',#4649);
++#4652=VERTEX_POINT('',#4650);
++#4653=CARTESIAN_POINT('',(1.8256E1,1.E0,1.25E0));
++#4654=CARTESIAN_POINT('',(1.7744E1,1.E0,1.25E0));
++#4655=VERTEX_POINT('',#4653);
++#4656=VERTEX_POINT('',#4654);
++#4657=CARTESIAN_POINT('',(1.8256E1,1.5E0,1.25E0));
++#4658=CARTESIAN_POINT('',(1.7744E1,1.5E0,1.25E0));
++#4659=VERTEX_POINT('',#4657);
++#4660=VERTEX_POINT('',#4658);
++#4661=CARTESIAN_POINT('',(1.81925E1,1.E0,1.25E0));
++#4662=CARTESIAN_POINT('',(1.78075E1,1.E0,1.25E0));
++#4663=VERTEX_POINT('',#4661);
++#4664=VERTEX_POINT('',#4662);
++#4665=CARTESIAN_POINT('',(6.256E0,1.E0,3.075E1));
++#4666=CARTESIAN_POINT('',(5.744E0,1.E0,3.075E1));
++#4667=VERTEX_POINT('',#4665);
++#4668=VERTEX_POINT('',#4666);
++#4669=CARTESIAN_POINT('',(6.256E0,1.5E0,3.075E1));
++#4670=CARTESIAN_POINT('',(5.744E0,1.5E0,3.075E1));
++#4671=VERTEX_POINT('',#4669);
++#4672=VERTEX_POINT('',#4670);
++#4673=CARTESIAN_POINT('',(6.1925E0,1.E0,3.075E1));
++#4674=CARTESIAN_POINT('',(5.8075E0,1.E0,3.075E1));
++#4675=VERTEX_POINT('',#4673);
++#4676=VERTEX_POINT('',#4674);
++#4677=CARTESIAN_POINT('',(1.2256E1,1.E0,3.075E1));
++#4678=CARTESIAN_POINT('',(1.1744E1,1.E0,3.075E1));
++#4679=VERTEX_POINT('',#4677);
++#4680=VERTEX_POINT('',#4678);
++#4681=CARTESIAN_POINT('',(1.2256E1,1.5E0,3.075E1));
++#4682=CARTESIAN_POINT('',(1.1744E1,1.5E0,3.075E1));
++#4683=VERTEX_POINT('',#4681);
++#4684=VERTEX_POINT('',#4682);
++#4685=CARTESIAN_POINT('',(1.21925E1,1.E0,3.075E1));
++#4686=CARTESIAN_POINT('',(1.18075E1,1.E0,3.075E1));
++#4687=VERTEX_POINT('',#4685);
++#4688=VERTEX_POINT('',#4686);
++#4689=CARTESIAN_POINT('',(1.8256E1,1.E0,3.075E1));
++#4690=CARTESIAN_POINT('',(1.7744E1,1.E0,3.075E1));
++#4691=VERTEX_POINT('',#4689);
++#4692=VERTEX_POINT('',#4690);
++#4693=CARTESIAN_POINT('',(1.8256E1,1.5E0,3.075E1));
++#4694=CARTESIAN_POINT('',(1.7744E1,1.5E0,3.075E1));
++#4695=VERTEX_POINT('',#4693);
++#4696=VERTEX_POINT('',#4694);
++#4697=CARTESIAN_POINT('',(1.81925E1,1.E0,3.075E1));
++#4698=CARTESIAN_POINT('',(1.78075E1,1.E0,3.075E1));
++#4699=VERTEX_POINT('',#4697);
++#4700=VERTEX_POINT('',#4698);
++#4701=CARTESIAN_POINT('',(4.4125E0,1.05E1,8.E0));
++#4702=CARTESIAN_POINT('',(4.0875E0,1.05E1,8.E0));
++#4703=VERTEX_POINT('',#4701);
++#4704=VERTEX_POINT('',#4702);
++#4705=CARTESIAN_POINT('',(4.4125E0,1.05E1,1.E1));
++#4706=CARTESIAN_POINT('',(4.0875E0,1.05E1,1.E1));
++#4707=VERTEX_POINT('',#4705);
++#4708=VERTEX_POINT('',#4706);
++#4709=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.25E0));
++#4710=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.25E0));
++#4711=VERTEX_POINT('',#4709);
++#4712=VERTEX_POINT('',#4710);
++#4713=CARTESIAN_POINT('',(4.345E0,1.09375E1,8.E0));
++#4714=CARTESIAN_POINT('',(4.155E0,1.09375E1,8.E0));
++#4715=VERTEX_POINT('',#4713);
++#4716=VERTEX_POINT('',#4714);
++#4717=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.25E0));
++#4718=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.25E0));
++#4719=VERTEX_POINT('',#4717);
++#4720=VERTEX_POINT('',#4718);
++#4721=CARTESIAN_POINT('',(3.9075E0,1.05E1,8.E0));
++#4722=CARTESIAN_POINT('',(3.7175E0,1.05E1,8.E0));
++#4723=VERTEX_POINT('',#4721);
++#4724=VERTEX_POINT('',#4722);
++#4725=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.25E0));
++#4726=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.25E0));
++#4727=VERTEX_POINT('',#4725);
++#4728=VERTEX_POINT('',#4726);
++#4729=CARTESIAN_POINT('',(4.345E0,1.00625E1,8.E0));
++#4730=CARTESIAN_POINT('',(4.155E0,1.00625E1,8.E0));
++#4731=VERTEX_POINT('',#4729);
++#4732=VERTEX_POINT('',#4730);
++#4733=CARTESIAN_POINT('',(1.95875E1,1.05E1,8.E0));
++#4734=CARTESIAN_POINT('',(1.99125E1,1.05E1,8.E0));
++#4735=VERTEX_POINT('',#4733);
++#4736=VERTEX_POINT('',#4734);
++#4737=CARTESIAN_POINT('',(1.95875E1,1.05E1,1.E1));
++#4738=CARTESIAN_POINT('',(1.99125E1,1.05E1,1.E1));
++#4739=VERTEX_POINT('',#4737);
++#4740=VERTEX_POINT('',#4738);
++#4741=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.25E0));
++#4742=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.25E0));
++#4743=VERTEX_POINT('',#4741);
++#4744=VERTEX_POINT('',#4742);
++#4745=CARTESIAN_POINT('',(1.9655E1,1.09375E1,8.E0));
++#4746=CARTESIAN_POINT('',(1.9845E1,1.09375E1,8.E0));
++#4747=VERTEX_POINT('',#4745);
++#4748=VERTEX_POINT('',#4746);
++#4749=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.25E0));
++#4750=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.25E0));
++#4751=VERTEX_POINT('',#4749);
++#4752=VERTEX_POINT('',#4750);
++#4753=CARTESIAN_POINT('',(2.00925E1,1.05E1,8.E0));
++#4754=CARTESIAN_POINT('',(2.02825E1,1.05E1,8.E0));
++#4755=VERTEX_POINT('',#4753);
++#4756=VERTEX_POINT('',#4754);
++#4757=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.25E0));
++#4758=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.25E0));
++#4759=VERTEX_POINT('',#4757);
++#4760=VERTEX_POINT('',#4758);
++#4761=CARTESIAN_POINT('',(1.9655E1,1.00625E1,8.E0));
++#4762=CARTESIAN_POINT('',(1.9845E1,1.00625E1,8.E0));
++#4763=VERTEX_POINT('',#4761);
++#4764=VERTEX_POINT('',#4762);
++#4765=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));
++#4766=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));
++#4767=VERTEX_POINT('',#4765);
++#4768=VERTEX_POINT('',#4766);
++#4769=CARTESIAN_POINT('',(5.E0,1.5E0,1.1E1));
++#4770=CARTESIAN_POINT('',(5.E0,0.E0,1.1E1));
++#4771=VERTEX_POINT('',#4769);
++#4772=VERTEX_POINT('',#4770);
++#4773=CARTESIAN_POINT('',(6.E0,1.5E0,1.E1));
++#4774=CARTESIAN_POINT('',(6.E0,0.E0,1.E1));
++#4775=VERTEX_POINT('',#4773);
++#4776=VERTEX_POINT('',#4774);
++#4777=CARTESIAN_POINT('',(1.9E1,0.E0,1.1E1));
++#4778=CARTESIAN_POINT('',(1.9E1,1.5E0,1.1E1));
++#4779=VERTEX_POINT('',#4777);
++#4780=VERTEX_POINT('',#4778);
++#4781=CARTESIAN_POINT('',(1.8E1,0.E0,1.E1));
++#4782=CARTESIAN_POINT('',(1.8E1,1.5E0,1.E1));
++#4783=VERTEX_POINT('',#4781);
++#4784=VERTEX_POINT('',#4782);
++#4785=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));
++#4786=VERTEX_POINT('',#4785);
++#4787=CARTESIAN_POINT('',(1.9E1,1.5E0,1.E1));
++#4788=VERTEX_POINT('',#4787);
++#4789=CARTESIAN_POINT('',(2.5E0,1.5E0,2.19375E1));
++#4790=CARTESIAN_POINT('',(2.5E0,0.E0,2.19375E1));
++#4791=VERTEX_POINT('',#4789);
++#4792=VERTEX_POINT('',#4790);
++#4793=CARTESIAN_POINT('',(5.5E0,1.5E0,1.89375E1));
++#4794=CARTESIAN_POINT('',(5.5E0,0.E0,1.89375E1));
++#4795=VERTEX_POINT('',#4793);
++#4796=VERTEX_POINT('',#4794);
++#4797=CARTESIAN_POINT('',(2.15E1,0.E0,2.19375E1));
++#4798=CARTESIAN_POINT('',(2.15E1,1.5E0,2.19375E1));
++#4799=VERTEX_POINT('',#4797);
++#4800=VERTEX_POINT('',#4798);
++#4801=CARTESIAN_POINT('',(1.85E1,0.E0,1.89375E1));
++#4802=CARTESIAN_POINT('',(1.85E1,1.5E0,1.89375E1));
++#4803=VERTEX_POINT('',#4801);
++#4804=VERTEX_POINT('',#4802);
++#4805=CARTESIAN_POINT('',(2.15E1,1.5E0,1.40625E1));
++#4806=CARTESIAN_POINT('',(2.15E1,0.E0,1.40625E1));
++#4807=VERTEX_POINT('',#4805);
++#4808=VERTEX_POINT('',#4806);
++#4809=CARTESIAN_POINT('',(1.85E1,1.5E0,1.70625E1));
++#4810=CARTESIAN_POINT('',(1.85E1,0.E0,1.70625E1));
++#4811=VERTEX_POINT('',#4809);
++#4812=VERTEX_POINT('',#4810);
++#4813=CARTESIAN_POINT('',(2.5E0,0.E0,1.40625E1));
++#4814=CARTESIAN_POINT('',(2.5E0,1.5E0,1.40625E1));
++#4815=VERTEX_POINT('',#4813);
++#4816=VERTEX_POINT('',#4814);
++#4817=CARTESIAN_POINT('',(5.5E0,0.E0,1.70625E1));
++#4818=CARTESIAN_POINT('',(5.5E0,1.5E0,1.70625E1));
++#4819=VERTEX_POINT('',#4817);
++#4820=VERTEX_POINT('',#4818);
++#4821=CARTESIAN_POINT('',(6.1925E0,0.E0,9.E0));
++#4822=CARTESIAN_POINT('',(5.8075E0,0.E0,9.E0));
++#4823=VERTEX_POINT('',#4821);
++#4824=VERTEX_POINT('',#4822);
++#4825=CARTESIAN_POINT('',(6.2575E0,1.E0,9.E0));
++#4826=CARTESIAN_POINT('',(5.7425E0,1.E0,9.E0));
++#4827=VERTEX_POINT('',#4825);
++#4828=VERTEX_POINT('',#4826);
++#4829=CARTESIAN_POINT('',(6.2575E0,1.5E0,9.E0));
++#4830=CARTESIAN_POINT('',(5.7425E0,1.5E0,9.E0));
++#4831=VERTEX_POINT('',#4829);
++#4832=VERTEX_POINT('',#4830);
++#4833=CARTESIAN_POINT('',(6.1925E0,1.E0,9.E0));
++#4834=CARTESIAN_POINT('',(5.8075E0,1.E0,9.E0));
++#4835=VERTEX_POINT('',#4833);
++#4836=VERTEX_POINT('',#4834);
++#4837=CARTESIAN_POINT('',(1.21925E1,0.E0,9.E0));
++#4838=CARTESIAN_POINT('',(1.18075E1,0.E0,9.E0));
++#4839=VERTEX_POINT('',#4837);
++#4840=VERTEX_POINT('',#4838);
++#4841=CARTESIAN_POINT('',(1.81925E1,0.E0,9.E0));
++#4842=CARTESIAN_POINT('',(1.78075E1,0.E0,9.E0));
++#4843=VERTEX_POINT('',#4841);
++#4844=VERTEX_POINT('',#4842);
++#4845=CARTESIAN_POINT('',(6.1925E0,0.E0,1.8E1));
++#4846=CARTESIAN_POINT('',(5.8075E0,0.E0,1.8E1));
++#4847=VERTEX_POINT('',#4845);
++#4848=VERTEX_POINT('',#4846);
++#4849=CARTESIAN_POINT('',(1.21925E1,0.E0,1.8E1));
++#4850=CARTESIAN_POINT('',(1.18075E1,0.E0,1.8E1));
++#4851=VERTEX_POINT('',#4849);
++#4852=VERTEX_POINT('',#4850);
++#4853=CARTESIAN_POINT('',(1.81925E1,0.E0,1.8E1));
++#4854=CARTESIAN_POINT('',(1.78075E1,0.E0,1.8E1));
++#4855=VERTEX_POINT('',#4853);
++#4856=VERTEX_POINT('',#4854);
++#4857=CARTESIAN_POINT('',(1.22575E1,1.E0,9.E0));
++#4858=CARTESIAN_POINT('',(1.17425E1,1.E0,9.E0));
++#4859=VERTEX_POINT('',#4857);
++#4860=VERTEX_POINT('',#4858);
++#4861=CARTESIAN_POINT('',(1.22575E1,1.5E0,9.E0));
++#4862=CARTESIAN_POINT('',(1.17425E1,1.5E0,9.E0));
++#4863=VERTEX_POINT('',#4861);
++#4864=VERTEX_POINT('',#4862);
++#4865=CARTESIAN_POINT('',(1.21925E1,1.E0,9.E0));
++#4866=CARTESIAN_POINT('',(1.18075E1,1.E0,9.E0));
++#4867=VERTEX_POINT('',#4865);
++#4868=VERTEX_POINT('',#4866);
++#4869=CARTESIAN_POINT('',(1.82575E1,1.E0,9.E0));
++#4870=CARTESIAN_POINT('',(1.77425E1,1.E0,9.E0));
++#4871=VERTEX_POINT('',#4869);
++#4872=VERTEX_POINT('',#4870);
++#4873=CARTESIAN_POINT('',(1.82575E1,1.5E0,9.E0));
++#4874=CARTESIAN_POINT('',(1.77425E1,1.5E0,9.E0));
++#4875=VERTEX_POINT('',#4873);
++#4876=VERTEX_POINT('',#4874);
++#4877=CARTESIAN_POINT('',(1.81925E1,1.E0,9.E0));
++#4878=CARTESIAN_POINT('',(1.78075E1,1.E0,9.E0));
++#4879=VERTEX_POINT('',#4877);
++#4880=VERTEX_POINT('',#4878);
++#4881=CARTESIAN_POINT('',(6.2575E0,1.E0,1.8E1));
++#4882=CARTESIAN_POINT('',(5.7425E0,1.E0,1.8E1));
++#4883=VERTEX_POINT('',#4881);
++#4884=VERTEX_POINT('',#4882);
++#4885=CARTESIAN_POINT('',(6.2575E0,1.5E0,1.8E1));
++#4886=CARTESIAN_POINT('',(5.7425E0,1.5E0,1.8E1));
++#4887=VERTEX_POINT('',#4885);
++#4888=VERTEX_POINT('',#4886);
++#4889=CARTESIAN_POINT('',(6.1925E0,1.E0,1.8E1));
++#4890=CARTESIAN_POINT('',(5.8075E0,1.E0,1.8E1));
++#4891=VERTEX_POINT('',#4889);
++#4892=VERTEX_POINT('',#4890);
++#4893=CARTESIAN_POINT('',(1.22575E1,1.E0,1.8E1));
++#4894=CARTESIAN_POINT('',(1.17425E1,1.E0,1.8E1));
++#4895=VERTEX_POINT('',#4893);
++#4896=VERTEX_POINT('',#4894);
++#4897=CARTESIAN_POINT('',(1.22575E1,1.5E0,1.8E1));
++#4898=CARTESIAN_POINT('',(1.17425E1,1.5E0,1.8E1));
++#4899=VERTEX_POINT('',#4897);
++#4900=VERTEX_POINT('',#4898);
++#4901=CARTESIAN_POINT('',(1.21925E1,1.E0,1.8E1));
++#4902=CARTESIAN_POINT('',(1.18075E1,1.E0,1.8E1));
++#4903=VERTEX_POINT('',#4901);
++#4904=VERTEX_POINT('',#4902);
++#4905=CARTESIAN_POINT('',(1.82575E1,1.E0,1.8E1));
++#4906=CARTESIAN_POINT('',(1.77425E1,1.E0,1.8E1));
++#4907=VERTEX_POINT('',#4905);
++#4908=VERTEX_POINT('',#4906);
++#4909=CARTESIAN_POINT('',(1.82575E1,1.5E0,1.8E1));
++#4910=CARTESIAN_POINT('',(1.77425E1,1.5E0,1.8E1));
++#4911=VERTEX_POINT('',#4909);
++#4912=VERTEX_POINT('',#4910);
++#4913=CARTESIAN_POINT('',(1.81925E1,1.E0,1.8E1));
++#4914=CARTESIAN_POINT('',(1.78075E1,1.E0,1.8E1));
++#4915=VERTEX_POINT('',#4913);
++#4916=VERTEX_POINT('',#4914);
++#4917=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.288675134595E1));
++#4918=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.E1));
++#4919=VERTEX_POINT('',#4917);
++#4920=VERTEX_POINT('',#4918);
++#4921=CARTESIAN_POINT('',(2.E0,1.5E0,1.288675134595E1));
++#4922=CARTESIAN_POINT('',(2.E0,1.5E0,1.E1));
++#4923=VERTEX_POINT('',#4921);
++#4924=VERTEX_POINT('',#4922);
++#4925=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));
++#4926=VERTEX_POINT('',#4925);
++#4927=CARTESIAN_POINT('',(2.E0,6.5E0,1.E1));
++#4928=VERTEX_POINT('',#4927);
++#4929=VERTEX_POINT('',#1837);
++#4930=VERTEX_POINT('',#1845);
++#4931=CARTESIAN_POINT('',(2.375E1,1.5E0,1.288675134595E1));
++#4932=CARTESIAN_POINT('',(2.375E1,1.5E0,1.E1));
++#4933=VERTEX_POINT('',#4931);
++#4934=VERTEX_POINT('',#4932);
++#4935=CARTESIAN_POINT('',(2.2E1,1.5E0,1.288675134595E1));
++#4936=CARTESIAN_POINT('',(2.2E1,1.5E0,1.E1));
++#4937=VERTEX_POINT('',#4935);
++#4938=VERTEX_POINT('',#4936);
++#4939=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));
++#4940=VERTEX_POINT('',#4939);
++#4941=CARTESIAN_POINT('',(2.2E1,6.5E0,1.E1));
++#4942=VERTEX_POINT('',#4941);
++#4943=VERTEX_POINT('',#2873);
++#4944=VERTEX_POINT('',#2881);
++#4945=CARTESIAN_POINT('',(3.75E0,2.E0,8.E0));
++#4946=CARTESIAN_POINT('',(3.75E0,2.E0,8.5E0));
++#4947=VERTEX_POINT('',#4945);
++#4948=VERTEX_POINT('',#4946);
++#4949=CARTESIAN_POINT('',(4.5E0,2.75E0,8.E0));
++#4950=CARTESIAN_POINT('',(4.5E0,2.75E0,8.5E0));
++#4951=VERTEX_POINT('',#4949);
++#4952=VERTEX_POINT('',#4950);
++#4953=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.E0));
++#4954=CARTESIAN_POINT('',(-8.007907113711E-1,3.114232198384E0,8.5E0));
++#4955=VERTEX_POINT('',#4953);
++#4956=VERTEX_POINT('',#4954);
++#4957=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.E0));
++#4958=CARTESIAN_POINT('',(-1.451727542799E-1,2.E0,8.5E0));
++#4959=VERTEX_POINT('',#4957);
++#4960=VERTEX_POINT('',#4958);
++#4961=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.E0));
++#4962=CARTESIAN_POINT('',(3.188160579053E0,9.5E0,8.5E0));
++#4963=VERTEX_POINT('',#4961);
++#4964=VERTEX_POINT('',#4962);
++#4965=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.E0));
++#4966=CARTESIAN_POINT('',(2.532542621962E0,9.114232198384E0,8.5E0));
++#4967=VERTEX_POINT('',#4965);
++#4968=VERTEX_POINT('',#4966);
++#4969=CARTESIAN_POINT('',(4.5E0,8.75E0,8.E0));
++#4970=CARTESIAN_POINT('',(4.5E0,8.75E0,8.5E0));
++#4971=VERTEX_POINT('',#4969);
++#4972=VERTEX_POINT('',#4970);
++#4973=CARTESIAN_POINT('',(3.75E0,9.5E0,8.E0));
++#4974=CARTESIAN_POINT('',(3.75E0,9.5E0,8.5E0));
++#4975=VERTEX_POINT('',#4973);
++#4976=VERTEX_POINT('',#4974);
++#4977=CARTESIAN_POINT('',(2.85E0,2.E0,1.E1));
++#4978=CARTESIAN_POINT('',(2.85E0,2.E0,9.5E0));
++#4979=VERTEX_POINT('',#4977);
++#4980=VERTEX_POINT('',#4978);
++#4981=CARTESIAN_POINT('',(2.5E0,2.35E0,1.E1));
++#4982=CARTESIAN_POINT('',(2.5E0,2.35E0,9.5E0));
++#4983=VERTEX_POINT('',#4981);
++#4984=VERTEX_POINT('',#4982);
++#4985=CARTESIAN_POINT('',(4.5E0,2.35E0,1.E1));
++#4986=CARTESIAN_POINT('',(4.5E0,2.35E0,9.5E0));
++#4987=VERTEX_POINT('',#4985);
++#4988=VERTEX_POINT('',#4986);
++#4989=CARTESIAN_POINT('',(4.15E0,2.E0,1.E1));
++#4990=CARTESIAN_POINT('',(4.15E0,2.E0,9.5E0));
++#4991=VERTEX_POINT('',#4989);
++#4992=VERTEX_POINT('',#4990);
++#4993=CARTESIAN_POINT('',(1.952799239454E0,7.E0,1.E1));
++#4994=CARTESIAN_POINT('',(1.952799239454E0,7.E0,9.5E0));
++#4995=VERTEX_POINT('',#4993);
++#4996=VERTEX_POINT('',#4994);
++#4997=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,1.E1));
++#4998=CARTESIAN_POINT('',(1.646844192811E0,7.519975025913E0,9.5E0));
++#4999=VERTEX_POINT('',#4997);
++#5000=VERTEX_POINT('',#4998);
++#5001=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,1.E1));
++#5002=CARTESIAN_POINT('',(2.646844192811E0,9.319975025913E0,9.5E0));
++#5003=VERTEX_POINT('',#5001);
++#5004=VERTEX_POINT('',#5002);
++#5005=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,1.E1));
++#5006=CARTESIAN_POINT('',(2.952799239454E0,9.5E0,9.5E0));
++#5007=VERTEX_POINT('',#5005);
++#5008=VERTEX_POINT('',#5006);
++#5009=CARTESIAN_POINT('',(4.15E0,9.5E0,1.E1));
++#5010=CARTESIAN_POINT('',(4.15E0,9.5E0,9.5E0));
++#5011=VERTEX_POINT('',#5009);
++#5012=VERTEX_POINT('',#5010);
++#5013=CARTESIAN_POINT('',(4.5E0,9.15E0,1.E1));
++#5014=CARTESIAN_POINT('',(4.5E0,9.15E0,9.5E0));
++#5015=VERTEX_POINT('',#5013);
++#5016=VERTEX_POINT('',#5014);
++#5017=CARTESIAN_POINT('',(2.5E0,6.65E0,9.5E0));
++#5018=CARTESIAN_POINT('',(2.5E0,6.65E0,1.E1));
++#5019=VERTEX_POINT('',#5017);
++#5020=VERTEX_POINT('',#5018);
++#5021=CARTESIAN_POINT('',(2.15E0,7.E0,1.E1));
++#5022=VERTEX_POINT('',#5021);
++#5023=CARTESIAN_POINT('',(2.15E0,7.E0,9.5E0));
++#5024=VERTEX_POINT('',#5023);
++#5025=CARTESIAN_POINT('',(2.025E1,2.E0,8.5E0));
++#5026=CARTESIAN_POINT('',(2.025E1,2.E0,8.E0));
++#5027=VERTEX_POINT('',#5025);
++#5028=VERTEX_POINT('',#5026);
++#5029=CARTESIAN_POINT('',(1.95E1,2.75E0,8.5E0));
++#5030=VERTEX_POINT('',#5029);
++#5031=CARTESIAN_POINT('',(1.95E1,2.75E0,8.E0));
++#5032=VERTEX_POINT('',#5031);
++#5033=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.5E0));
++#5034=CARTESIAN_POINT('',(2.480079071137E1,3.114232198384E0,8.E0));
++#5035=VERTEX_POINT('',#5033);
++#5036=VERTEX_POINT('',#5034);
++#5037=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.5E0));
++#5038=VERTEX_POINT('',#5037);
++#5039=CARTESIAN_POINT('',(2.414517275428E1,2.E0,8.E0));
++#5040=VERTEX_POINT('',#5039);
++#5041=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.5E0));
++#5042=CARTESIAN_POINT('',(2.081183942095E1,9.5E0,8.E0));
++#5043=VERTEX_POINT('',#5041);
++#5044=VERTEX_POINT('',#5042);
++#5045=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.5E0));
++#5046=VERTEX_POINT('',#5045);
++#5047=CARTESIAN_POINT('',(2.146745737804E1,9.114232198384E0,8.E0));
++#5048=VERTEX_POINT('',#5047);
++#5049=CARTESIAN_POINT('',(1.95E1,8.75E0,8.5E0));
++#5050=CARTESIAN_POINT('',(1.95E1,8.75E0,8.E0));
++#5051=VERTEX_POINT('',#5049);
++#5052=VERTEX_POINT('',#5050);
++#5053=CARTESIAN_POINT('',(2.025E1,9.5E0,8.5E0));
++#5054=VERTEX_POINT('',#5053);
++#5055=CARTESIAN_POINT('',(2.025E1,9.5E0,8.E0));
++#5056=VERTEX_POINT('',#5055);
++#5057=CARTESIAN_POINT('',(2.115E1,2.E0,9.5E0));
++#5058=CARTESIAN_POINT('',(2.115E1,2.E0,1.E1));
++#5059=VERTEX_POINT('',#5057);
++#5060=VERTEX_POINT('',#5058);
++#5061=CARTESIAN_POINT('',(2.15E1,2.35E0,9.5E0));
++#5062=VERTEX_POINT('',#5061);
++#5063=CARTESIAN_POINT('',(2.15E1,2.35E0,1.E1));
++#5064=VERTEX_POINT('',#5063);
++#5065=CARTESIAN_POINT('',(1.95E1,2.35E0,9.5E0));
++#5066=CARTESIAN_POINT('',(1.95E1,2.35E0,1.E1));
++#5067=VERTEX_POINT('',#5065);
++#5068=VERTEX_POINT('',#5066);
++#5069=CARTESIAN_POINT('',(1.985E1,2.E0,9.5E0));
++#5070=VERTEX_POINT('',#5069);
++#5071=CARTESIAN_POINT('',(1.985E1,2.E0,1.E1));
++#5072=VERTEX_POINT('',#5071);
++#5073=CARTESIAN_POINT('',(2.204720076055E1,7.E0,9.5E0));
++#5074=CARTESIAN_POINT('',(2.204720076055E1,7.E0,1.E1));
++#5075=VERTEX_POINT('',#5073);
++#5076=VERTEX_POINT('',#5074);
++#5077=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,9.5E0));
++#5078=VERTEX_POINT('',#5077);
++#5079=CARTESIAN_POINT('',(2.235315580719E1,7.519975025913E0,1.E1));
++#5080=VERTEX_POINT('',#5079);
++#5081=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,9.5E0));
++#5082=CARTESIAN_POINT('',(2.135315580719E1,9.319975025913E0,1.E1));
++#5083=VERTEX_POINT('',#5081);
++#5084=VERTEX_POINT('',#5082);
++#5085=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,9.5E0));
++#5086=VERTEX_POINT('',#5085);
++#5087=CARTESIAN_POINT('',(2.104720076055E1,9.5E0,1.E1));
++#5088=VERTEX_POINT('',#5087);
++#5089=CARTESIAN_POINT('',(1.985E1,9.5E0,9.5E0));
++#5090=CARTESIAN_POINT('',(1.985E1,9.5E0,1.E1));
++#5091=VERTEX_POINT('',#5089);
++#5092=VERTEX_POINT('',#5090);
++#5093=CARTESIAN_POINT('',(1.95E1,9.15E0,9.5E0));
++#5094=VERTEX_POINT('',#5093);
++#5095=CARTESIAN_POINT('',(1.95E1,9.15E0,1.E1));
++#5096=VERTEX_POINT('',#5095);
++#5097=CARTESIAN_POINT('',(2.15E1,6.65E0,1.E1));
++#5098=CARTESIAN_POINT('',(2.15E1,6.65E0,9.5E0));
++#5099=VERTEX_POINT('',#5097);
++#5100=VERTEX_POINT('',#5098);
++#5101=CARTESIAN_POINT('',(2.185E1,7.E0,1.E1));
++#5102=CARTESIAN_POINT('',(2.185E1,7.E0,9.5E0));
++#5103=VERTEX_POINT('',#5101);
++#5104=VERTEX_POINT('',#5102);
++#5105=CARTESIAN_POINT('',(7.5E0,6.875E-1,6.875E-1));
++#5106=CARTESIAN_POINT('',(1.05E1,6.875E-1,6.875E-1));
++#5107=VERTEX_POINT('',#5105);
++#5108=VERTEX_POINT('',#5106);
++#5109=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.8125E0));
++#5110=VERTEX_POINT('',#5109);
++#5111=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.8125E0));
++#5112=VERTEX_POINT('',#5111);
++#5113=CARTESIAN_POINT('',(3.939978538987E0,6.875E-1,1.032293285145E0));
++#5114=CARTESIAN_POINT('',(4.942849714544E0,6.875E-1,2.419779663480E0));
++#5115=VERTEX_POINT('',#5113);
++#5116=VERTEX_POINT('',#5114);
++#5117=CARTESIAN_POINT('',(2.432015885023E0,6.875E-1,4.918683812405E0));
++#5118=VERTEX_POINT('',#5117);
++#5119=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));
++#5120=CARTESIAN_POINT('',(1.05E1,0.E0,6.875E-1));
++#5121=VERTEX_POINT('',#5119);
++#5122=VERTEX_POINT('',#5120);
++#5123=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));
++#5124=VERTEX_POINT('',#5123);
++#5125=CARTESIAN_POINT('',(7.5E0,0.E0,1.8125E0));
++#5126=VERTEX_POINT('',#5125);
++#5127=CARTESIAN_POINT('',(3.939978538987E0,0.E0,1.032293285145E0));
++#5128=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.419779663480E0));
++#5129=VERTEX_POINT('',#5127);
++#5130=VERTEX_POINT('',#5128);
++#5131=CARTESIAN_POINT('',(2.432015885023E0,0.E0,4.918683812405E0));
++#5132=VERTEX_POINT('',#5131);
++#5133=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,4.046865146430E0));
++#5134=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,4.046865146430E0));
++#5135=VERTEX_POINT('',#5133);
++#5136=VERTEX_POINT('',#5134);
++#5137=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,4.912826677187E0));
++#5138=CARTESIAN_POINT('',(7.850270400779E-1,6.875E-1,4.912826677187E0));
++#5139=VERTEX_POINT('',#5137);
++#5140=VERTEX_POINT('',#5138);
++#5141=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.5E0));
++#5142=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.5E0));
++#5143=VERTEX_POINT('',#5141);
++#5144=VERTEX_POINT('',#5142);
++#5145=CARTESIAN_POINT('',(6.9E-1,0.E0,7.5E0));
++#5146=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));
++#5147=VERTEX_POINT('',#5145);
++#5148=VERTEX_POINT('',#5146);
++#5149=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.0375E1));
++#5150=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,1.0375E1));
++#5151=VERTEX_POINT('',#5149);
++#5152=VERTEX_POINT('',#5150);
++#5153=CARTESIAN_POINT('',(-4.375E-1,0.E0,1.125E1));
++#5154=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,1.125E1));
++#5155=VERTEX_POINT('',#5153);
++#5156=VERTEX_POINT('',#5154);
++#5157=CARTESIAN_POINT('',(-4.375E-1,0.E0,8.69E0));
++#5158=CARTESIAN_POINT('',(-4.375E-1,6.875E-1,8.69E0));
++#5159=VERTEX_POINT('',#5157);
++#5160=VERTEX_POINT('',#5158);
++#5161=CARTESIAN_POINT('',(-1.3125E0,0.E0,9.565E0));
++#5162=CARTESIAN_POINT('',(-1.3125E0,6.875E-1,9.565E0));
++#5163=VERTEX_POINT('',#5161);
++#5164=VERTEX_POINT('',#5162);
++#5165=CARTESIAN_POINT('',(4.3125E0,0.E0,9.565E0));
++#5166=CARTESIAN_POINT('',(4.3125E0,6.875E-1,9.565E0));
++#5167=VERTEX_POINT('',#5165);
++#5168=VERTEX_POINT('',#5166);
++#5169=CARTESIAN_POINT('',(3.4375E0,0.E0,8.69E0));
++#5170=CARTESIAN_POINT('',(3.4375E0,6.875E-1,8.69E0));
++#5171=VERTEX_POINT('',#5169);
++#5172=VERTEX_POINT('',#5170);
++#5173=CARTESIAN_POINT('',(3.4375E0,0.E0,1.125E1));
++#5174=CARTESIAN_POINT('',(3.4375E0,6.875E-1,1.125E1));
++#5175=VERTEX_POINT('',#5173);
++#5176=VERTEX_POINT('',#5174);
++#5177=CARTESIAN_POINT('',(4.3125E0,0.E0,1.0375E1));
++#5178=CARTESIAN_POINT('',(4.3125E0,6.875E-1,1.0375E1));
++#5179=VERTEX_POINT('',#5177);
++#5180=VERTEX_POINT('',#5178);
++#5181=CARTESIAN_POINT('',(6.9E-1,6.875E-1,7.815E0));
++#5182=CARTESIAN_POINT('',(6.9E-1,0.E0,7.815E0));
++#5183=VERTEX_POINT('',#5181);
++#5184=VERTEX_POINT('',#5182);
++#5185=CARTESIAN_POINT('',(-1.85E-1,0.E0,8.69E0));
++#5186=VERTEX_POINT('',#5185);
++#5187=CARTESIAN_POINT('',(-1.85E-1,6.875E-1,8.69E0));
++#5188=VERTEX_POINT('',#5187);
++#5189=CARTESIAN_POINT('',(2.6875E0,6.875E-1,8.69E0));
++#5190=CARTESIAN_POINT('',(2.6875E0,0.E0,8.69E0));
++#5191=VERTEX_POINT('',#5189);
++#5192=VERTEX_POINT('',#5190);
++#5193=CARTESIAN_POINT('',(1.8125E0,0.E0,7.815E0));
++#5194=VERTEX_POINT('',#5193);
++#5195=CARTESIAN_POINT('',(1.8125E0,6.875E-1,7.815E0));
++#5196=VERTEX_POINT('',#5195);
++#5197=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.65E1));
++#5198=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.35E1));
++#5199=VERTEX_POINT('',#5197);
++#5200=VERTEX_POINT('',#5198);
++#5201=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.35E1));
++#5202=VERTEX_POINT('',#5201);
++#5203=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.65E1));
++#5204=VERTEX_POINT('',#5203);
++#5205=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));
++#5206=CARTESIAN_POINT('',(6.875E-1,0.E0,1.35E1));
++#5207=VERTEX_POINT('',#5205);
++#5208=VERTEX_POINT('',#5206);
++#5209=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));
++#5210=VERTEX_POINT('',#5209);
++#5211=CARTESIAN_POINT('',(1.8125E0,0.E0,1.65E1));
++#5212=VERTEX_POINT('',#5211);
++#5213=CARTESIAN_POINT('',(6.875E-1,6.875E-1,2.25E1));
++#5214=CARTESIAN_POINT('',(6.875E-1,6.875E-1,1.95E1));
++#5215=VERTEX_POINT('',#5213);
++#5216=VERTEX_POINT('',#5214);
++#5217=CARTESIAN_POINT('',(1.8125E0,6.875E-1,1.95E1));
++#5218=VERTEX_POINT('',#5217);
++#5219=CARTESIAN_POINT('',(1.8125E0,6.875E-1,2.25E1));
++#5220=VERTEX_POINT('',#5219);
++#5221=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));
++#5222=CARTESIAN_POINT('',(6.875E-1,0.E0,1.95E1));
++#5223=VERTEX_POINT('',#5221);
++#5224=VERTEX_POINT('',#5222);
++#5225=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));
++#5226=VERTEX_POINT('',#5225);
++#5227=CARTESIAN_POINT('',(1.8125E0,0.E0,2.25E1));
++#5228=VERTEX_POINT('',#5227);
++#5229=CARTESIAN_POINT('',(7.5E0,6.875E-1,8.5E0));
++#5230=CARTESIAN_POINT('',(1.05E1,6.875E-1,8.5E0));
++#5231=VERTEX_POINT('',#5229);
++#5232=VERTEX_POINT('',#5230);
++#5233=CARTESIAN_POINT('',(1.05E1,6.875E-1,9.5E0));
++#5234=VERTEX_POINT('',#5233);
++#5235=CARTESIAN_POINT('',(7.5E0,6.875E-1,9.5E0));
++#5236=VERTEX_POINT('',#5235);
++#5237=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));
++#5238=CARTESIAN_POINT('',(1.05E1,0.E0,8.5E0));
++#5239=VERTEX_POINT('',#5237);
++#5240=VERTEX_POINT('',#5238);
++#5241=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));
++#5242=VERTEX_POINT('',#5241);
++#5243=CARTESIAN_POINT('',(7.5E0,0.E0,9.5E0));
++#5244=VERTEX_POINT('',#5243);
++#5245=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.75625E1));
++#5246=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.75625E1));
++#5247=VERTEX_POINT('',#5245);
++#5248=VERTEX_POINT('',#5246);
++#5249=CARTESIAN_POINT('',(1.05E1,6.875E-1,1.84375E1));
++#5250=VERTEX_POINT('',#5249);
++#5251=CARTESIAN_POINT('',(7.5E0,6.875E-1,1.84375E1));
++#5252=VERTEX_POINT('',#5251);
++#5253=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));
++#5254=CARTESIAN_POINT('',(1.05E1,0.E0,1.75625E1));
++#5255=VERTEX_POINT('',#5253);
++#5256=VERTEX_POINT('',#5254);
++#5257=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));
++#5258=VERTEX_POINT('',#5257);
++#5259=CARTESIAN_POINT('',(7.5E0,0.E0,1.84375E1));
++#5260=VERTEX_POINT('',#5259);
++#5261=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.13125E1));
++#5262=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.13125E1));
++#5263=VERTEX_POINT('',#5261);
++#5264=VERTEX_POINT('',#5262);
++#5265=CARTESIAN_POINT('',(1.05E1,6.875E-1,3.01875E1));
++#5266=VERTEX_POINT('',#5265);
++#5267=CARTESIAN_POINT('',(7.5E0,6.875E-1,3.01875E1));
++#5268=VERTEX_POINT('',#5267);
++#5269=CARTESIAN_POINT('',(3.939978538987E0,6.875E-1,3.096770671486E1));
++#5270=CARTESIAN_POINT('',(4.942849714544E0,6.875E-1,2.958022033652E1));
++#5271=VERTEX_POINT('',#5269);
++#5272=VERTEX_POINT('',#5270);
++#5273=CARTESIAN_POINT('',(2.432015885023E0,6.875E-1,2.708131618759E1));
++#5274=VERTEX_POINT('',#5273);
++#5275=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));
++#5276=CARTESIAN_POINT('',(1.05E1,0.E0,3.13125E1));
++#5277=VERTEX_POINT('',#5275);
++#5278=VERTEX_POINT('',#5276);
++#5279=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));
++#5280=VERTEX_POINT('',#5279);
++#5281=CARTESIAN_POINT('',(7.5E0,0.E0,3.01875E1));
++#5282=VERTEX_POINT('',#5281);
++#5283=CARTESIAN_POINT('',(3.939978538987E0,0.E0,3.096770671486E1));
++#5284=CARTESIAN_POINT('',(4.942849714544E0,0.E0,2.958022033652E1));
++#5285=VERTEX_POINT('',#5283);
++#5286=VERTEX_POINT('',#5284);
++#5287=CARTESIAN_POINT('',(2.432015885023E0,0.E0,2.708131618759E1));
++#5288=VERTEX_POINT('',#5287);
++#5289=CARTESIAN_POINT('',(1.65E1,6.875E-1,6.875E-1));
++#5290=CARTESIAN_POINT('',(1.35E1,6.875E-1,6.875E-1));
++#5291=VERTEX_POINT('',#5289);
++#5292=VERTEX_POINT('',#5290);
++#5293=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.8125E0));
++#5294=VERTEX_POINT('',#5293);
++#5295=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.8125E0));
++#5296=VERTEX_POINT('',#5295);
++#5297=CARTESIAN_POINT('',(2.006002146101E1,6.875E-1,1.032293285145E0));
++#5298=CARTESIAN_POINT('',(1.905715028546E1,6.875E-1,2.419779663480E0));
++#5299=VERTEX_POINT('',#5297);
++#5300=VERTEX_POINT('',#5298);
++#5301=CARTESIAN_POINT('',(2.156798411498E1,6.875E-1,4.918683812405E0));
++#5302=VERTEX_POINT('',#5301);
++#5303=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));
++#5304=CARTESIAN_POINT('',(1.35E1,0.E0,6.875E-1));
++#5305=VERTEX_POINT('',#5303);
++#5306=VERTEX_POINT('',#5304);
++#5307=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));
++#5308=VERTEX_POINT('',#5307);
++#5309=CARTESIAN_POINT('',(1.65E1,0.E0,1.8125E0));
++#5310=VERTEX_POINT('',#5309);
++#5311=CARTESIAN_POINT('',(2.006002146101E1,0.E0,1.032293285145E0));
++#5312=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.419779663480E0));
++#5313=VERTEX_POINT('',#5311);
++#5314=VERTEX_POINT('',#5312);
++#5315=CARTESIAN_POINT('',(2.156798411498E1,0.E0,4.918683812405E0));
++#5316=VERTEX_POINT('',#5315);
++#5317=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.5E0));
++#5318=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.5E0));
++#5319=VERTEX_POINT('',#5317);
++#5320=VERTEX_POINT('',#5318);
++#5321=CARTESIAN_POINT('',(2.331E1,0.E0,7.5E0));
++#5322=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));
++#5323=VERTEX_POINT('',#5321);
++#5324=VERTEX_POINT('',#5322);
++#5325=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.65E1));
++#5326=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.35E1));
++#5327=VERTEX_POINT('',#5325);
++#5328=VERTEX_POINT('',#5326);
++#5329=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.35E1));
++#5330=VERTEX_POINT('',#5329);
++#5331=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.65E1));
++#5332=VERTEX_POINT('',#5331);
++#5333=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));
++#5334=CARTESIAN_POINT('',(2.33125E1,0.E0,1.35E1));
++#5335=VERTEX_POINT('',#5333);
++#5336=VERTEX_POINT('',#5334);
++#5337=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));
++#5338=VERTEX_POINT('',#5337);
++#5339=CARTESIAN_POINT('',(2.21875E1,0.E0,1.65E1));
++#5340=VERTEX_POINT('',#5339);
++#5341=CARTESIAN_POINT('',(2.33125E1,6.875E-1,2.25E1));
++#5342=CARTESIAN_POINT('',(2.33125E1,6.875E-1,1.95E1));
++#5343=VERTEX_POINT('',#5341);
++#5344=VERTEX_POINT('',#5342);
++#5345=CARTESIAN_POINT('',(2.21875E1,6.875E-1,1.95E1));
++#5346=VERTEX_POINT('',#5345);
++#5347=CARTESIAN_POINT('',(2.21875E1,6.875E-1,2.25E1));
++#5348=VERTEX_POINT('',#5347);
++#5349=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));
++#5350=CARTESIAN_POINT('',(2.33125E1,0.E0,1.95E1));
++#5351=VERTEX_POINT('',#5349);
++#5352=VERTEX_POINT('',#5350);
++#5353=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));
++#5354=VERTEX_POINT('',#5353);
++#5355=CARTESIAN_POINT('',(2.21875E1,0.E0,2.25E1));
++#5356=VERTEX_POINT('',#5355);
++#5357=CARTESIAN_POINT('',(1.65E1,6.875E-1,8.5E0));
++#5358=CARTESIAN_POINT('',(1.35E1,6.875E-1,8.5E0));
++#5359=VERTEX_POINT('',#5357);
++#5360=VERTEX_POINT('',#5358);
++#5361=CARTESIAN_POINT('',(1.35E1,6.875E-1,9.5E0));
++#5362=VERTEX_POINT('',#5361);
++#5363=CARTESIAN_POINT('',(1.65E1,6.875E-1,9.5E0));
++#5364=VERTEX_POINT('',#5363);
++#5365=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));
++#5366=CARTESIAN_POINT('',(1.35E1,0.E0,8.5E0));
++#5367=VERTEX_POINT('',#5365);
++#5368=VERTEX_POINT('',#5366);
++#5369=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));
++#5370=VERTEX_POINT('',#5369);
++#5371=CARTESIAN_POINT('',(1.65E1,0.E0,9.5E0));
++#5372=VERTEX_POINT('',#5371);
++#5373=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.75625E1));
++#5374=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.75625E1));
++#5375=VERTEX_POINT('',#5373);
++#5376=VERTEX_POINT('',#5374);
++#5377=CARTESIAN_POINT('',(1.35E1,6.875E-1,1.84375E1));
++#5378=VERTEX_POINT('',#5377);
++#5379=CARTESIAN_POINT('',(1.65E1,6.875E-1,1.84375E1));
++#5380=VERTEX_POINT('',#5379);
++#5381=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));
++#5382=CARTESIAN_POINT('',(1.35E1,0.E0,1.75625E1));
++#5383=VERTEX_POINT('',#5381);
++#5384=VERTEX_POINT('',#5382);
++#5385=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));
++#5386=VERTEX_POINT('',#5385);
++#5387=CARTESIAN_POINT('',(1.65E1,0.E0,1.84375E1));
++#5388=VERTEX_POINT('',#5387);
++#5389=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.13125E1));
++#5390=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.13125E1));
++#5391=VERTEX_POINT('',#5389);
++#5392=VERTEX_POINT('',#5390);
++#5393=CARTESIAN_POINT('',(1.35E1,6.875E-1,3.01875E1));
++#5394=VERTEX_POINT('',#5393);
++#5395=CARTESIAN_POINT('',(1.65E1,6.875E-1,3.01875E1));
++#5396=VERTEX_POINT('',#5395);
++#5397=CARTESIAN_POINT('',(2.006002146101E1,6.875E-1,3.096770671486E1));
++#5398=CARTESIAN_POINT('',(1.905715028546E1,6.875E-1,2.958022033652E1));
++#5399=VERTEX_POINT('',#5397);
++#5400=VERTEX_POINT('',#5398);
++#5401=CARTESIAN_POINT('',(2.156798411498E1,6.875E-1,2.708131618759E1));
++#5402=VERTEX_POINT('',#5401);
++#5403=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));
++#5404=CARTESIAN_POINT('',(1.35E1,0.E0,3.13125E1));
++#5405=VERTEX_POINT('',#5403);
++#5406=VERTEX_POINT('',#5404);
++#5407=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));
++#5408=VERTEX_POINT('',#5407);
++#5409=CARTESIAN_POINT('',(1.65E1,0.E0,3.01875E1));
++#5410=VERTEX_POINT('',#5409);
++#5411=CARTESIAN_POINT('',(2.006002146101E1,0.E0,3.096770671486E1));
++#5412=CARTESIAN_POINT('',(1.905715028546E1,0.E0,2.958022033652E1));
++#5413=VERTEX_POINT('',#5411);
++#5414=VERTEX_POINT('',#5412);
++#5415=CARTESIAN_POINT('',(2.156798411498E1,0.E0,2.708131618759E1));
++#5416=VERTEX_POINT('',#5415);
++#5417=CARTESIAN_POINT('',(1.96875E1,6.875E-1,9.57E0));
++#5418=CARTESIAN_POINT('',(1.96875E1,0.E0,9.57E0));
++#5419=VERTEX_POINT('',#5417);
++#5420=VERTEX_POINT('',#5418);
++#5421=CARTESIAN_POINT('',(2.05675E1,6.875E-1,8.69E0));
++#5422=VERTEX_POINT('',#5421);
++#5423=CARTESIAN_POINT('',(2.05675E1,0.E0,8.69E0));
++#5424=VERTEX_POINT('',#5423);
++#5425=CARTESIAN_POINT('',(2.05675E1,6.875E-1,1.125E1));
++#5426=CARTESIAN_POINT('',(2.05675E1,0.E0,1.125E1));
++#5427=VERTEX_POINT('',#5425);
++#5428=VERTEX_POINT('',#5426);
++#5429=CARTESIAN_POINT('',(1.96875E1,6.875E-1,1.037E1));
++#5430=VERTEX_POINT('',#5429);
++#5431=CARTESIAN_POINT('',(1.96875E1,0.E0,1.037E1));
++#5432=VERTEX_POINT('',#5431);
++#5433=CARTESIAN_POINT('',(2.44325E1,6.875E-1,8.69E0));
++#5434=CARTESIAN_POINT('',(2.44325E1,0.E0,8.69E0));
++#5435=VERTEX_POINT('',#5433);
++#5436=VERTEX_POINT('',#5434);
++#5437=CARTESIAN_POINT('',(2.53125E1,6.875E-1,9.57E0));
++#5438=VERTEX_POINT('',#5437);
++#5439=CARTESIAN_POINT('',(2.53125E1,0.E0,9.57E0));
++#5440=VERTEX_POINT('',#5439);
++#5441=CARTESIAN_POINT('',(2.53125E1,6.875E-1,1.037E1));
++#5442=CARTESIAN_POINT('',(2.53125E1,0.E0,1.037E1));
++#5443=VERTEX_POINT('',#5441);
++#5444=VERTEX_POINT('',#5442);
++#5445=CARTESIAN_POINT('',(2.44325E1,6.875E-1,1.125E1));
++#5446=VERTEX_POINT('',#5445);
++#5447=CARTESIAN_POINT('',(2.44325E1,0.E0,1.125E1));
++#5448=VERTEX_POINT('',#5447);
++#5449=CARTESIAN_POINT('',(2.13075E1,0.E0,8.69E0));
++#5450=CARTESIAN_POINT('',(2.13075E1,6.875E-1,8.69E0));
++#5451=VERTEX_POINT('',#5449);
++#5452=VERTEX_POINT('',#5450);
++#5453=CARTESIAN_POINT('',(2.21875E1,0.E0,7.81E0));
++#5454=CARTESIAN_POINT('',(2.21875E1,6.875E-1,7.81E0));
++#5455=VERTEX_POINT('',#5453);
++#5456=VERTEX_POINT('',#5454);
++#5457=CARTESIAN_POINT('',(2.331E1,0.E0,7.81E0));
++#5458=CARTESIAN_POINT('',(2.331E1,6.875E-1,7.81E0));
++#5459=VERTEX_POINT('',#5457);
++#5460=VERTEX_POINT('',#5458);
++#5461=CARTESIAN_POINT('',(2.419E1,0.E0,8.69E0));
++#5462=CARTESIAN_POINT('',(2.419E1,6.875E-1,8.69E0));
++#5463=VERTEX_POINT('',#5461);
++#5464=VERTEX_POINT('',#5462);
++#5465=CARTESIAN_POINT('',(2.321497295992E1,0.E0,4.912826677187E0));
++#5466=CARTESIAN_POINT('',(2.321497295992E1,6.875E-1,4.912826677187E0));
++#5467=VERTEX_POINT('',#5465);
++#5468=VERTEX_POINT('',#5466);
++#5469=CARTESIAN_POINT('',(2.307459332230E1,0.E0,4.046865146430E0));
++#5470=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,4.046865146430E0));
++#5471=VERTEX_POINT('',#5469);
++#5472=VERTEX_POINT('',#5470);
++#5473=CARTESIAN_POINT('',(7.850270400779E-1,0.E0,2.708717332281E1));
++#5474=CARTESIAN_POINT('',(7.850270400779E-1,6.875E-1,2.708717332281E1));
++#5475=VERTEX_POINT('',#5473);
++#5476=VERTEX_POINT('',#5474);
++#5477=CARTESIAN_POINT('',(9.254066777019E-1,0.E0,2.795313485357E1));
++#5478=CARTESIAN_POINT('',(9.254066777019E-1,6.875E-1,2.795313485357E1));
++#5479=VERTEX_POINT('',#5477);
++#5480=VERTEX_POINT('',#5478);
++#5481=CARTESIAN_POINT('',(2.307459332230E1,0.E0,2.795313485357E1));
++#5482=CARTESIAN_POINT('',(2.307459332230E1,6.875E-1,2.795313485357E1));
++#5483=VERTEX_POINT('',#5481);
++#5484=VERTEX_POINT('',#5482);
++#5485=CARTESIAN_POINT('',(2.321497295992E1,0.E0,2.708717332281E1));
++#5486=CARTESIAN_POINT('',(2.321497295992E1,6.875E-1,2.708717332281E1));
++#5487=VERTEX_POINT('',#5485);
++#5488=VERTEX_POINT('',#5486);
++#5489=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
++#5490=DIRECTION('',(0.E0,1.E0,0.E0));
++#5491=DIRECTION('',(1.E0,0.E0,0.E0));
++#5492=AXIS2_PLACEMENT_3D('',#5489,#5490,#5491);
++#5493=PLANE('',#5492);
++#5495=ORIENTED_EDGE('',*,*,#5494,.F.);
++#5497=ORIENTED_EDGE('',*,*,#5496,.F.);
++#5499=ORIENTED_EDGE('',*,*,#5498,.T.);
++#5501=ORIENTED_EDGE('',*,*,#5500,.F.);
++#5503=ORIENTED_EDGE('',*,*,#5502,.T.);
++#5505=ORIENTED_EDGE('',*,*,#5504,.F.);
++#5507=ORIENTED_EDGE('',*,*,#5506,.T.);
++#5509=ORIENTED_EDGE('',*,*,#5508,.F.);
++#5511=ORIENTED_EDGE('',*,*,#5510,.T.);
++#5513=ORIENTED_EDGE('',*,*,#5512,.T.);
++#5515=ORIENTED_EDGE('',*,*,#5514,.F.);
++#5517=ORIENTED_EDGE('',*,*,#5516,.T.);
++#5519=ORIENTED_EDGE('',*,*,#5518,.F.);
++#5521=ORIENTED_EDGE('',*,*,#5520,.T.);
++#5523=ORIENTED_EDGE('',*,*,#5522,.F.);
++#5525=ORIENTED_EDGE('',*,*,#5524,.T.);
++#5527=ORIENTED_EDGE('',*,*,#5526,.F.);
++#5529=ORIENTED_EDGE('',*,*,#5528,.T.);
++#5531=ORIENTED_EDGE('',*,*,#5530,.F.);
++#5533=ORIENTED_EDGE('',*,*,#5532,.F.);
++#5535=ORIENTED_EDGE('',*,*,#5534,.T.);
++#5537=ORIENTED_EDGE('',*,*,#5536,.F.);
++#5538=EDGE_LOOP('',(#5495,#5497,#5499,#5501,#5503,#5505,#5507,#5509,#5511,#5513,
++#5515,#5517,#5519,#5521,#5523,#5525,#5527,#5529,#5531,#5533,#5535,#5537));
++#5539=FACE_OUTER_BOUND('',#5538,.F.);
++#5541=ORIENTED_EDGE('',*,*,#5540,.T.);
++#5543=ORIENTED_EDGE('',*,*,#5542,.F.);
++#5545=ORIENTED_EDGE('',*,*,#5544,.F.);
++#5547=ORIENTED_EDGE('',*,*,#5546,.F.);
++#5549=ORIENTED_EDGE('',*,*,#5548,.F.);
++#5551=ORIENTED_EDGE('',*,*,#5550,.F.);
++#5552=EDGE_LOOP('',(#5541,#5543,#5545,#5547,#5549,#5551));
++#5553=FACE_BOUND('',#5552,.F.);
++#5555=ORIENTED_EDGE('',*,*,#5554,.T.);
++#5557=ORIENTED_EDGE('',*,*,#5556,.T.);
++#5558=EDGE_LOOP('',(#5555,#5557));
++#5559=FACE_BOUND('',#5558,.F.);
++#5561=ORIENTED_EDGE('',*,*,#5560,.T.);
++#5563=ORIENTED_EDGE('',*,*,#5562,.T.);
++#5564=EDGE_LOOP('',(#5561,#5563));
++#5565=FACE_BOUND('',#5564,.F.);
++#5567=ORIENTED_EDGE('',*,*,#5566,.T.);
++#5569=ORIENTED_EDGE('',*,*,#5568,.T.);
++#5570=EDGE_LOOP('',(#5567,#5569));
++#5571=FACE_BOUND('',#5570,.F.);
++#5573=ORIENTED_EDGE('',*,*,#5572,.T.);
++#5575=ORIENTED_EDGE('',*,*,#5574,.T.);
++#5576=EDGE_LOOP('',(#5573,#5575));
++#5577=FACE_BOUND('',#5576,.F.);
++#5579=ORIENTED_EDGE('',*,*,#5578,.T.);
++#5581=ORIENTED_EDGE('',*,*,#5580,.T.);
++#5582=EDGE_LOOP('',(#5579,#5581));
++#5583=FACE_BOUND('',#5582,.F.);
++#5585=ORIENTED_EDGE('',*,*,#5584,.T.);
++#5587=ORIENTED_EDGE('',*,*,#5586,.T.);
++#5588=EDGE_LOOP('',(#5585,#5587));
++#5589=FACE_BOUND('',#5588,.F.);
++#5591=ORIENTED_EDGE('',*,*,#5590,.T.);
++#5593=ORIENTED_EDGE('',*,*,#5592,.T.);
++#5594=EDGE_LOOP('',(#5591,#5593));
++#5595=FACE_BOUND('',#5594,.F.);
++#5597=ORIENTED_EDGE('',*,*,#5596,.T.);
++#5599=ORIENTED_EDGE('',*,*,#5598,.T.);
++#5600=EDGE_LOOP('',(#5597,#5599));
++#5601=FACE_BOUND('',#5600,.F.);
++#5603=ORIENTED_EDGE('',*,*,#5602,.T.);
++#5605=ORIENTED_EDGE('',*,*,#5604,.T.);
++#5606=EDGE_LOOP('',(#5603,#5605));
++#5607=FACE_BOUND('',#5606,.F.);
++#5609=ORIENTED_EDGE('',*,*,#5608,.T.);
++#5611=ORIENTED_EDGE('',*,*,#5610,.T.);
++#5612=EDGE_LOOP('',(#5609,#5611));
++#5613=FACE_BOUND('',#5612,.F.);
++#5615=ORIENTED_EDGE('',*,*,#5614,.T.);
++#5617=ORIENTED_EDGE('',*,*,#5616,.T.);
++#5618=EDGE_LOOP('',(#5615,#5617));
++#5619=FACE_BOUND('',#5618,.F.);
++#5621=ORIENTED_EDGE('',*,*,#5620,.T.);
++#5623=ORIENTED_EDGE('',*,*,#5622,.T.);
++#5624=EDGE_LOOP('',(#5621,#5623));
++#5625=FACE_BOUND('',#5624,.F.);
++#5627=ORIENTED_EDGE('',*,*,#5626,.T.);
++#5629=ORIENTED_EDGE('',*,*,#5628,.T.);
++#5630=EDGE_LOOP('',(#5627,#5629));
++#5631=FACE_BOUND('',#5630,.F.);
++#5633=ORIENTED_EDGE('',*,*,#5632,.T.);
++#5635=ORIENTED_EDGE('',*,*,#5634,.T.);
++#5636=EDGE_LOOP('',(#5633,#5635));
++#5637=FACE_BOUND('',#5636,.F.);
++#5639=ORIENTED_EDGE('',*,*,#5638,.T.);
++#5641=ORIENTED_EDGE('',*,*,#5640,.F.);
++#5643=ORIENTED_EDGE('',*,*,#5642,.F.);
++#5645=ORIENTED_EDGE('',*,*,#5644,.F.);
++#5647=ORIENTED_EDGE('',*,*,#5646,.F.);
++#5649=ORIENTED_EDGE('',*,*,#5648,.F.);
++#5651=ORIENTED_EDGE('',*,*,#5650,.F.);
++#5653=ORIENTED_EDGE('',*,*,#5652,.F.);
++#5654=EDGE_LOOP('',(#5639,#5641,#5643,#5645,#5647,#5649,#5651,#5653));
++#5655=FACE_BOUND('',#5654,.F.);
++#5657=ORIENTED_EDGE('',*,*,#5656,.F.);
++#5659=ORIENTED_EDGE('',*,*,#5658,.F.);
++#5661=ORIENTED_EDGE('',*,*,#5660,.T.);
++#5663=ORIENTED_EDGE('',*,*,#5662,.F.);
++#5665=ORIENTED_EDGE('',*,*,#5664,.F.);
++#5667=ORIENTED_EDGE('',*,*,#5666,.F.);
++#5669=ORIENTED_EDGE('',*,*,#5668,.T.);
++#5671=ORIENTED_EDGE('',*,*,#5670,.F.);
++#5673=ORIENTED_EDGE('',*,*,#5672,.T.);
++#5675=ORIENTED_EDGE('',*,*,#5674,.F.);
++#5677=ORIENTED_EDGE('',*,*,#5676,.T.);
++#5679=ORIENTED_EDGE('',*,*,#5678,.F.);
++#5681=ORIENTED_EDGE('',*,*,#5680,.F.);
++#5683=ORIENTED_EDGE('',*,*,#5682,.T.);
++#5685=ORIENTED_EDGE('',*,*,#5684,.F.);
++#5687=ORIENTED_EDGE('',*,*,#5686,.F.);
++#5688=EDGE_LOOP('',(#5657,#5659,#5661,#5663,#5665,#5667,#5669,#5671,#5673,#5675,
++#5677,#5679,#5681,#5683,#5685,#5687));
++#5689=FACE_BOUND('',#5688,.F.);
++#5691=ORIENTED_EDGE('',*,*,#5690,.T.);
++#5693=ORIENTED_EDGE('',*,*,#5692,.T.);
++#5694=EDGE_LOOP('',(#5691,#5693));
++#5695=FACE_BOUND('',#5694,.F.);
++#5697=ORIENTED_EDGE('',*,*,#5696,.T.);
++#5699=ORIENTED_EDGE('',*,*,#5698,.T.);
++#5700=EDGE_LOOP('',(#5697,#5699));
++#5701=FACE_BOUND('',#5700,.F.);
++#5703=ORIENTED_EDGE('',*,*,#5702,.T.);
++#5705=ORIENTED_EDGE('',*,*,#5704,.T.);
++#5706=EDGE_LOOP('',(#5703,#5705));
++#5707=FACE_BOUND('',#5706,.F.);
++#5709=ORIENTED_EDGE('',*,*,#5708,.T.);
++#5711=ORIENTED_EDGE('',*,*,#5710,.T.);
++#5712=EDGE_LOOP('',(#5709,#5711));
++#5713=FACE_BOUND('',#5712,.F.);
++#5715=ORIENTED_EDGE('',*,*,#5714,.T.);
++#5717=ORIENTED_EDGE('',*,*,#5716,.T.);
++#5718=EDGE_LOOP('',(#5715,#5717));
++#5719=FACE_BOUND('',#5718,.F.);
++#5721=ORIENTED_EDGE('',*,*,#5720,.T.);
++#5723=ORIENTED_EDGE('',*,*,#5722,.T.);
++#5724=EDGE_LOOP('',(#5721,#5723));
++#5725=FACE_BOUND('',#5724,.F.);
++#5727=ORIENTED_EDGE('',*,*,#5726,.T.);
++#5729=ORIENTED_EDGE('',*,*,#5728,.T.);
++#5731=ORIENTED_EDGE('',*,*,#5730,.T.);
++#5733=ORIENTED_EDGE('',*,*,#5732,.T.);
++#5734=EDGE_LOOP('',(#5727,#5729,#5731,#5733));
++#5735=FACE_BOUND('',#5734,.F.);
++#5737=ORIENTED_EDGE('',*,*,#5736,.T.);
++#5739=ORIENTED_EDGE('',*,*,#5738,.F.);
++#5741=ORIENTED_EDGE('',*,*,#5740,.T.);
++#5743=ORIENTED_EDGE('',*,*,#5742,.T.);
++#5745=ORIENTED_EDGE('',*,*,#5744,.F.);
++#5746=EDGE_LOOP('',(#5737,#5739,#5741,#5743,#5745));
++#5747=FACE_BOUND('',#5746,.F.);
++#5749=ORIENTED_EDGE('',*,*,#5748,.F.);
++#5751=ORIENTED_EDGE('',*,*,#5750,.T.);
++#5753=ORIENTED_EDGE('',*,*,#5752,.T.);
++#5755=ORIENTED_EDGE('',*,*,#5754,.T.);
++#5757=ORIENTED_EDGE('',*,*,#5756,.F.);
++#5759=ORIENTED_EDGE('',*,*,#5758,.T.);
++#5761=ORIENTED_EDGE('',*,*,#5760,.F.);
++#5763=ORIENTED_EDGE('',*,*,#5762,.T.);
++#5765=ORIENTED_EDGE('',*,*,#5764,.F.);
++#5767=ORIENTED_EDGE('',*,*,#5766,.T.);
++#5769=ORIENTED_EDGE('',*,*,#5768,.F.);
++#5771=ORIENTED_EDGE('',*,*,#5770,.T.);
++#5773=ORIENTED_EDGE('',*,*,#5772,.F.);
++#5775=ORIENTED_EDGE('',*,*,#5774,.T.);
++#5776=EDGE_LOOP('',(#5749,#5751,#5753,#5755,#5757,#5759,#5761,#5763,#5765,#5767,
++#5769,#5771,#5773,#5775));
++#5777=FACE_BOUND('',#5776,.F.);
++#5779=ORIENTED_EDGE('',*,*,#5778,.T.);
++#5781=ORIENTED_EDGE('',*,*,#5780,.T.);
++#5783=ORIENTED_EDGE('',*,*,#5782,.T.);
++#5785=ORIENTED_EDGE('',*,*,#5784,.T.);
++#5786=EDGE_LOOP('',(#5779,#5781,#5783,#5785));
++#5787=FACE_BOUND('',#5786,.F.);
++#5789=ORIENTED_EDGE('',*,*,#5788,.T.);
++#5791=ORIENTED_EDGE('',*,*,#5790,.T.);
++#5793=ORIENTED_EDGE('',*,*,#5792,.T.);
++#5795=ORIENTED_EDGE('',*,*,#5794,.T.);
++#5796=EDGE_LOOP('',(#5789,#5791,#5793,#5795));
++#5797=FACE_BOUND('',#5796,.F.);
++#5799=ORIENTED_EDGE('',*,*,#5798,.T.);
++#5801=ORIENTED_EDGE('',*,*,#5800,.T.);
++#5803=ORIENTED_EDGE('',*,*,#5802,.T.);
++#5805=ORIENTED_EDGE('',*,*,#5804,.T.);
++#5806=EDGE_LOOP('',(#5799,#5801,#5803,#5805));
++#5807=FACE_BOUND('',#5806,.F.);
++#5809=ORIENTED_EDGE('',*,*,#5808,.T.);
++#5811=ORIENTED_EDGE('',*,*,#5810,.T.);
++#5813=ORIENTED_EDGE('',*,*,#5812,.T.);
++#5815=ORIENTED_EDGE('',*,*,#5814,.T.);
++#5816=EDGE_LOOP('',(#5809,#5811,#5813,#5815));
++#5817=FACE_BOUND('',#5816,.F.);
++#5819=ORIENTED_EDGE('',*,*,#5818,.F.);
++#5821=ORIENTED_EDGE('',*,*,#5820,.F.);
++#5823=ORIENTED_EDGE('',*,*,#5822,.F.);
++#5825=ORIENTED_EDGE('',*,*,#5824,.F.);
++#5826=EDGE_LOOP('',(#5819,#5821,#5823,#5825));
++#5827=FACE_BOUND('',#5826,.F.);
++#5829=ORIENTED_EDGE('',*,*,#5828,.F.);
++#5831=ORIENTED_EDGE('',*,*,#5830,.F.);
++#5833=ORIENTED_EDGE('',*,*,#5832,.F.);
++#5835=ORIENTED_EDGE('',*,*,#5834,.F.);
++#5836=EDGE_LOOP('',(#5829,#5831,#5833,#5835));
++#5837=FACE_BOUND('',#5836,.F.);
++#5839=ORIENTED_EDGE('',*,*,#5838,.F.);
++#5841=ORIENTED_EDGE('',*,*,#5840,.F.);
++#5843=ORIENTED_EDGE('',*,*,#5842,.F.);
++#5845=ORIENTED_EDGE('',*,*,#5844,.F.);
++#5846=EDGE_LOOP('',(#5839,#5841,#5843,#5845));
++#5847=FACE_BOUND('',#5846,.F.);
++#5849=ORIENTED_EDGE('',*,*,#5848,.F.);
++#5851=ORIENTED_EDGE('',*,*,#5850,.F.);
++#5853=ORIENTED_EDGE('',*,*,#5852,.F.);
++#5855=ORIENTED_EDGE('',*,*,#5854,.F.);
++#5856=EDGE_LOOP('',(#5849,#5851,#5853,#5855));
++#5857=FACE_BOUND('',#5856,.F.);
++#5859=ORIENTED_EDGE('',*,*,#5858,.F.);
++#5861=ORIENTED_EDGE('',*,*,#5860,.F.);
++#5863=ORIENTED_EDGE('',*,*,#5862,.F.);
++#5865=ORIENTED_EDGE('',*,*,#5864,.F.);
++#5866=EDGE_LOOP('',(#5859,#5861,#5863,#5865));
++#5867=FACE_BOUND('',#5866,.F.);
++#5869=ORIENTED_EDGE('',*,*,#5868,.F.);
++#5871=ORIENTED_EDGE('',*,*,#5870,.F.);
++#5873=ORIENTED_EDGE('',*,*,#5872,.F.);
++#5875=ORIENTED_EDGE('',*,*,#5874,.F.);
++#5876=EDGE_LOOP('',(#5869,#5871,#5873,#5875));
++#5877=FACE_BOUND('',#5876,.F.);
++#5879=ORIENTED_EDGE('',*,*,#5878,.T.);
++#5881=ORIENTED_EDGE('',*,*,#5880,.T.);
++#5883=ORIENTED_EDGE('',*,*,#5882,.T.);
++#5885=ORIENTED_EDGE('',*,*,#5884,.T.);
++#5886=EDGE_LOOP('',(#5879,#5881,#5883,#5885));
++#5887=FACE_BOUND('',#5886,.F.);
++#5889=ORIENTED_EDGE('',*,*,#5888,.F.);
++#5891=ORIENTED_EDGE('',*,*,#5890,.F.);
++#5893=ORIENTED_EDGE('',*,*,#5892,.F.);
++#5895=ORIENTED_EDGE('',*,*,#5894,.F.);
++#5897=ORIENTED_EDGE('',*,*,#5896,.F.);
++#5899=ORIENTED_EDGE('',*,*,#5898,.F.);
++#5901=ORIENTED_EDGE('',*,*,#5900,.F.);
++#5903=ORIENTED_EDGE('',*,*,#5902,.F.);
++#5905=ORIENTED_EDGE('',*,*,#5904,.F.);
++#5907=ORIENTED_EDGE('',*,*,#5906,.F.);
++#5909=ORIENTED_EDGE('',*,*,#5908,.F.);
++#5911=ORIENTED_EDGE('',*,*,#5910,.F.);
++#5913=ORIENTED_EDGE('',*,*,#5912,.F.);
++#5915=ORIENTED_EDGE('',*,*,#5914,.F.);
++#5916=EDGE_LOOP('',(#5889,#5891,#5893,#5895,#5897,#5899,#5901,#5903,#5905,#5907,
++#5909,#5911,#5913,#5915));
++#5917=FACE_BOUND('',#5916,.F.);
++#5919=ORIENTED_EDGE('',*,*,#5918,.F.);
++#5921=ORIENTED_EDGE('',*,*,#5920,.F.);
++#5923=ORIENTED_EDGE('',*,*,#5922,.F.);
++#5925=ORIENTED_EDGE('',*,*,#5924,.T.);
++#5927=ORIENTED_EDGE('',*,*,#5926,.F.);
++#5928=EDGE_LOOP('',(#5919,#5921,#5923,#5925,#5927));
++#5929=FACE_BOUND('',#5928,.F.);
++#5931=ORIENTED_EDGE('',*,*,#5930,.F.);
++#5933=ORIENTED_EDGE('',*,*,#5932,.F.);
++#5935=ORIENTED_EDGE('',*,*,#5934,.F.);
++#5937=ORIENTED_EDGE('',*,*,#5936,.T.);
++#5939=ORIENTED_EDGE('',*,*,#5938,.F.);
++#5940=EDGE_LOOP('',(#5931,#5933,#5935,#5937,#5939));
++#5941=FACE_BOUND('',#5940,.F.);
++#5943=ORIENTED_EDGE('',*,*,#5942,.T.);
++#5945=ORIENTED_EDGE('',*,*,#5944,.F.);
++#5947=ORIENTED_EDGE('',*,*,#5946,.T.);
++#5949=ORIENTED_EDGE('',*,*,#5948,.T.);
++#5951=ORIENTED_EDGE('',*,*,#5950,.F.);
++#5952=EDGE_LOOP('',(#5943,#5945,#5947,#5949,#5951));
++#5953=FACE_BOUND('',#5952,.F.);
++#5954=ADVANCED_FACE('',(#5539,#5553,#5559,#5565,#5571,#5577,#5583,#5589,#5595,
++#5601,#5607,#5613,#5619,#5625,#5631,#5637,#5655,#5689,#5695,#5701,#5707,#5713,
++#5719,#5725,#5735,#5747,#5777,#5787,#5797,#5807,#5817,#5827,#5837,#5847,#5857,
++#5867,#5877,#5887,#5917,#5929,#5941,#5953),#5493,.F.);
++#5955=CARTESIAN_POINT('',(0.E0,0.E0,8.E0));
++#5956=DIRECTION('',(0.E0,0.E0,1.E0));
++#5957=DIRECTION('',(1.E0,0.E0,0.E0));
++#5958=AXIS2_PLACEMENT_3D('',#5955,#5956,#5957);
++#5959=PLANE('',#5958);
++#5960=ORIENTED_EDGE('',*,*,#5540,.F.);
++#5962=ORIENTED_EDGE('',*,*,#5961,.T.);
++#5964=ORIENTED_EDGE('',*,*,#5963,.F.);
++#5966=ORIENTED_EDGE('',*,*,#5965,.F.);
++#5967=ORIENTED_EDGE('',*,*,#5494,.T.);
++#5969=ORIENTED_EDGE('',*,*,#5968,.F.);
++#5971=ORIENTED_EDGE('',*,*,#5970,.F.);
++#5973=ORIENTED_EDGE('',*,*,#5972,.T.);
++#5975=ORIENTED_EDGE('',*,*,#5974,.F.);
++#5977=ORIENTED_EDGE('',*,*,#5976,.F.);
++#5979=ORIENTED_EDGE('',*,*,#5978,.F.);
++#5981=ORIENTED_EDGE('',*,*,#5980,.T.);
++#5983=ORIENTED_EDGE('',*,*,#5982,.T.);
++#5985=ORIENTED_EDGE('',*,*,#5984,.F.);
++#5986=ORIENTED_EDGE('',*,*,#5510,.F.);
++#5988=ORIENTED_EDGE('',*,*,#5987,.F.);
++#5990=ORIENTED_EDGE('',*,*,#5989,.F.);
++#5992=ORIENTED_EDGE('',*,*,#5991,.T.);
++#5993=EDGE_LOOP('',(#5960,#5962,#5964,#5966,#5967,#5969,#5971,#5973,#5975,#5977,
++#5979,#5981,#5983,#5985,#5986,#5988,#5990,#5992));
++#5994=FACE_OUTER_BOUND('',#5993,.F.);
++#5996=ORIENTED_EDGE('',*,*,#5995,.T.);
++#5998=ORIENTED_EDGE('',*,*,#5997,.T.);
++#5999=EDGE_LOOP('',(#5996,#5998));
++#6000=FACE_BOUND('',#5999,.F.);
++#6002=ORIENTED_EDGE('',*,*,#6001,.T.);
++#6004=ORIENTED_EDGE('',*,*,#6003,.T.);
++#6005=EDGE_LOOP('',(#6002,#6004));
++#6006=FACE_BOUND('',#6005,.F.);
++#6008=ORIENTED_EDGE('',*,*,#6007,.T.);
++#6010=ORIENTED_EDGE('',*,*,#6009,.T.);
++#6011=EDGE_LOOP('',(#6008,#6010));
++#6012=FACE_BOUND('',#6011,.F.);
++#6014=ORIENTED_EDGE('',*,*,#6013,.T.);
++#6016=ORIENTED_EDGE('',*,*,#6015,.T.);
++#6017=EDGE_LOOP('',(#6014,#6016));
++#6018=FACE_BOUND('',#6017,.F.);
++#6020=ORIENTED_EDGE('',*,*,#6019,.F.);
++#6022=ORIENTED_EDGE('',*,*,#6021,.F.);
++#6023=EDGE_LOOP('',(#6020,#6022));
++#6024=FACE_BOUND('',#6023,.F.);
++#6026=ORIENTED_EDGE('',*,*,#6025,.F.);
++#6028=ORIENTED_EDGE('',*,*,#6027,.F.);
++#6029=EDGE_LOOP('',(#6026,#6028));
++#6030=FACE_BOUND('',#6029,.F.);
++#6032=ORIENTED_EDGE('',*,*,#6031,.F.);
++#6034=ORIENTED_EDGE('',*,*,#6033,.F.);
++#6035=EDGE_LOOP('',(#6032,#6034));
++#6036=FACE_BOUND('',#6035,.F.);
++#6038=ORIENTED_EDGE('',*,*,#6037,.F.);
++#6040=ORIENTED_EDGE('',*,*,#6039,.F.);
++#6041=EDGE_LOOP('',(#6038,#6040));
++#6042=FACE_BOUND('',#6041,.F.);
++#6044=ORIENTED_EDGE('',*,*,#6043,.T.);
++#6046=ORIENTED_EDGE('',*,*,#6045,.F.);
++#6048=ORIENTED_EDGE('',*,*,#6047,.T.);
++#6050=ORIENTED_EDGE('',*,*,#6049,.F.);
++#6052=ORIENTED_EDGE('',*,*,#6051,.T.);
++#6054=ORIENTED_EDGE('',*,*,#6053,.F.);
++#6056=ORIENTED_EDGE('',*,*,#6055,.T.);
++#6058=ORIENTED_EDGE('',*,*,#6057,.F.);
++#6059=EDGE_LOOP('',(#6044,#6046,#6048,#6050,#6052,#6054,#6056,#6058));
++#6060=FACE_BOUND('',#6059,.F.);
++#6062=ORIENTED_EDGE('',*,*,#6061,.F.);
++#6064=ORIENTED_EDGE('',*,*,#6063,.F.);
++#6066=ORIENTED_EDGE('',*,*,#6065,.F.);
++#6068=ORIENTED_EDGE('',*,*,#6067,.F.);
++#6070=ORIENTED_EDGE('',*,*,#6069,.F.);
++#6072=ORIENTED_EDGE('',*,*,#6071,.F.);
++#6074=ORIENTED_EDGE('',*,*,#6073,.F.);
++#6076=ORIENTED_EDGE('',*,*,#6075,.F.);
++#6077=EDGE_LOOP('',(#6062,#6064,#6066,#6068,#6070,#6072,#6074,#6076));
++#6078=FACE_BOUND('',#6077,.F.);
++#6079=ADVANCED_FACE('',(#5994,#6000,#6006,#6012,#6018,#6024,#6030,#6036,#6042,
++#6060,#6078),#5959,.F.);
++#6080=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));
++#6081=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6082=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6083=AXIS2_PLACEMENT_3D('',#6080,#6081,#6082);
++#6084=CYLINDRICAL_SURFACE('',#6083,9.5E-2);
++#6085=ORIENTED_EDGE('',*,*,#5995,.F.);
++#6087=ORIENTED_EDGE('',*,*,#6086,.T.);
++#6089=ORIENTED_EDGE('',*,*,#6088,.T.);
++#6091=ORIENTED_EDGE('',*,*,#6090,.F.);
++#6092=EDGE_LOOP('',(#6085,#6087,#6089,#6091));
++#6093=FACE_OUTER_BOUND('',#6092,.F.);
++#6094=ADVANCED_FACE('',(#6093),#6084,.F.);
++#6095=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.E0));
++#6096=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6097=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6098=AXIS2_PLACEMENT_3D('',#6095,#6096,#6097);
++#6099=CYLINDRICAL_SURFACE('',#6098,9.5E-2);
++#6100=ORIENTED_EDGE('',*,*,#5997,.F.);
++#6101=ORIENTED_EDGE('',*,*,#6090,.T.);
++#6103=ORIENTED_EDGE('',*,*,#6102,.T.);
++#6104=ORIENTED_EDGE('',*,*,#6086,.F.);
++#6105=EDGE_LOOP('',(#6100,#6101,#6103,#6104));
++#6106=FACE_OUTER_BOUND('',#6105,.F.);
++#6107=ADVANCED_FACE('',(#6106),#6099,.F.);
++#6108=CARTESIAN_POINT('',(1.975E1,1.09375E1,8.25E0));
++#6109=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6110=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6111=AXIS2_PLACEMENT_3D('',#6108,#6109,#6110);
++#6112=PLANE('',#6111);
++#6113=ORIENTED_EDGE('',*,*,#6088,.F.);
++#6114=ORIENTED_EDGE('',*,*,#6102,.F.);
++#6115=EDGE_LOOP('',(#6113,#6114));
++#6116=FACE_OUTER_BOUND('',#6115,.F.);
++#6117=ADVANCED_FACE('',(#6116),#6112,.T.);
++#6118=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));
++#6119=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6120=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6121=AXIS2_PLACEMENT_3D('',#6118,#6119,#6120);
++#6122=CYLINDRICAL_SURFACE('',#6121,1.625E-1);
++#6123=ORIENTED_EDGE('',*,*,#6001,.F.);
++#6125=ORIENTED_EDGE('',*,*,#6124,.T.);
++#6127=ORIENTED_EDGE('',*,*,#6126,.T.);
++#6129=ORIENTED_EDGE('',*,*,#6128,.F.);
++#6130=EDGE_LOOP('',(#6123,#6125,#6127,#6129));
++#6131=FACE_OUTER_BOUND('',#6130,.F.);
++#6132=ADVANCED_FACE('',(#6131),#6122,.F.);
++#6133=CARTESIAN_POINT('',(1.975E1,1.05E1,8.E0));
++#6134=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6135=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6136=AXIS2_PLACEMENT_3D('',#6133,#6134,#6135);
++#6137=CYLINDRICAL_SURFACE('',#6136,1.625E-1);
++#6138=ORIENTED_EDGE('',*,*,#6003,.F.);
++#6139=ORIENTED_EDGE('',*,*,#6128,.T.);
++#6141=ORIENTED_EDGE('',*,*,#6140,.T.);
++#6142=ORIENTED_EDGE('',*,*,#6124,.F.);
++#6143=EDGE_LOOP('',(#6138,#6139,#6141,#6142));
++#6144=FACE_OUTER_BOUND('',#6143,.F.);
++#6145=ADVANCED_FACE('',(#6144),#6137,.F.);
++#6146=CARTESIAN_POINT('',(2.4E1,0.E0,1.E1));
++#6147=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6148=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6149=AXIS2_PLACEMENT_3D('',#6146,#6147,#6148);
++#6150=PLANE('',#6149);
++#6152=ORIENTED_EDGE('',*,*,#6151,.T.);
++#6154=ORIENTED_EDGE('',*,*,#6153,.T.);
++#6156=ORIENTED_EDGE('',*,*,#6155,.F.);
++#6158=ORIENTED_EDGE('',*,*,#6157,.F.);
++#6160=ORIENTED_EDGE('',*,*,#6159,.T.);
++#6162=ORIENTED_EDGE('',*,*,#6161,.T.);
++#6164=ORIENTED_EDGE('',*,*,#6163,.T.);
++#6166=ORIENTED_EDGE('',*,*,#6165,.T.);
++#6168=ORIENTED_EDGE('',*,*,#6167,.F.);
++#6169=EDGE_LOOP('',(#6152,#6154,#6156,#6158,#6160,#6162,#6164,#6166,#6168));
++#6170=FACE_OUTER_BOUND('',#6169,.F.);
++#6171=ORIENTED_EDGE('',*,*,#6126,.F.);
++#6172=ORIENTED_EDGE('',*,*,#6140,.F.);
++#6173=EDGE_LOOP('',(#6171,#6172));
++#6174=FACE_BOUND('',#6173,.F.);
++#6176=ORIENTED_EDGE('',*,*,#6175,.F.);
++#6178=ORIENTED_EDGE('',*,*,#6177,.F.);
++#6180=ORIENTED_EDGE('',*,*,#6179,.F.);
++#6182=ORIENTED_EDGE('',*,*,#6181,.F.);
++#6184=ORIENTED_EDGE('',*,*,#6183,.F.);
++#6186=ORIENTED_EDGE('',*,*,#6185,.F.);
++#6188=ORIENTED_EDGE('',*,*,#6187,.F.);
++#6190=ORIENTED_EDGE('',*,*,#6189,.F.);
++#6192=ORIENTED_EDGE('',*,*,#6191,.F.);
++#6194=ORIENTED_EDGE('',*,*,#6193,.F.);
++#6196=ORIENTED_EDGE('',*,*,#6195,.F.);
++#6198=ORIENTED_EDGE('',*,*,#6197,.F.);
++#6199=EDGE_LOOP('',(#6176,#6178,#6180,#6182,#6184,#6186,#6188,#6190,#6192,#6194,
++#6196,#6198));
++#6200=FACE_BOUND('',#6199,.F.);
++#6201=ADVANCED_FACE('',(#6170,#6174,#6200),#6150,.F.);
++#6202=CARTESIAN_POINT('',(2.375E1,1.5E0,1.2E1));
++#6203=DIRECTION('',(1.E0,0.E0,0.E0));
++#6204=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6205=AXIS2_PLACEMENT_3D('',#6202,#6203,#6204);
++#6206=PLANE('',#6205);
++#6208=ORIENTED_EDGE('',*,*,#6207,.F.);
++#6210=ORIENTED_EDGE('',*,*,#6209,.F.);
++#6211=ORIENTED_EDGE('',*,*,#6151,.F.);
++#6212=EDGE_LOOP('',(#6208,#6210,#6211));
++#6213=FACE_OUTER_BOUND('',#6212,.F.);
++#6214=ADVANCED_FACE('',(#6213),#6206,.T.);
++#6215=CARTESIAN_POINT('',(0.E0,1.5E0,0.E0));
++#6216=DIRECTION('',(0.E0,1.E0,0.E0));
++#6217=DIRECTION('',(1.E0,0.E0,0.E0));
++#6218=AXIS2_PLACEMENT_3D('',#6215,#6216,#6217);
++#6219=PLANE('',#6218);
++#6220=ORIENTED_EDGE('',*,*,#5963,.T.);
++#6222=ORIENTED_EDGE('',*,*,#6221,.F.);
++#6224=ORIENTED_EDGE('',*,*,#6223,.F.);
++#6226=ORIENTED_EDGE('',*,*,#6225,.T.);
++#6228=ORIENTED_EDGE('',*,*,#6227,.F.);
++#6230=ORIENTED_EDGE('',*,*,#6229,.F.);
++#6231=ORIENTED_EDGE('',*,*,#5989,.T.);
++#6233=ORIENTED_EDGE('',*,*,#6232,.F.);
++#6235=ORIENTED_EDGE('',*,*,#6234,.F.);
++#6237=ORIENTED_EDGE('',*,*,#6236,.T.);
++#6239=ORIENTED_EDGE('',*,*,#6238,.F.);
++#6241=ORIENTED_EDGE('',*,*,#6240,.T.);
++#6243=ORIENTED_EDGE('',*,*,#6242,.F.);
++#6245=ORIENTED_EDGE('',*,*,#6244,.F.);
++#6246=EDGE_LOOP('',(#6220,#6222,#6224,#6226,#6228,#6230,#6231,#6233,#6235,#6237,
++#6239,#6241,#6243,#6245));
++#6247=FACE_OUTER_BOUND('',#6246,.F.);
++#6249=ORIENTED_EDGE('',*,*,#6248,.F.);
++#6251=ORIENTED_EDGE('',*,*,#6250,.F.);
++#6252=EDGE_LOOP('',(#6249,#6251));
++#6253=FACE_BOUND('',#6252,.F.);
++#6255=ORIENTED_EDGE('',*,*,#6254,.F.);
++#6257=ORIENTED_EDGE('',*,*,#6256,.F.);
++#6258=EDGE_LOOP('',(#6255,#6257));
++#6259=FACE_BOUND('',#6258,.F.);
++#6261=ORIENTED_EDGE('',*,*,#6260,.F.);
++#6263=ORIENTED_EDGE('',*,*,#6262,.F.);
++#6264=EDGE_LOOP('',(#6261,#6263));
++#6265=FACE_BOUND('',#6264,.F.);
++#6267=ORIENTED_EDGE('',*,*,#6266,.F.);
++#6269=ORIENTED_EDGE('',*,*,#6268,.F.);
++#6270=EDGE_LOOP('',(#6267,#6269));
++#6271=FACE_BOUND('',#6270,.F.);
++#6273=ORIENTED_EDGE('',*,*,#6272,.F.);
++#6275=ORIENTED_EDGE('',*,*,#6274,.F.);
++#6276=EDGE_LOOP('',(#6273,#6275));
++#6277=FACE_BOUND('',#6276,.F.);
++#6278=ADVANCED_FACE('',(#6247,#6253,#6259,#6265,#6271,#6277),#6219,.T.);
++#6279=CARTESIAN_POINT('',(0.E0,1.5E0,0.E0));
++#6280=DIRECTION('',(0.E0,1.E0,0.E0));
++#6281=DIRECTION('',(1.E0,0.E0,0.E0));
++#6282=AXIS2_PLACEMENT_3D('',#6279,#6280,#6281);
++#6283=PLANE('',#6282);
++#6284=ORIENTED_EDGE('',*,*,#6207,.T.);
++#6285=ORIENTED_EDGE('',*,*,#6167,.T.);
++#6287=ORIENTED_EDGE('',*,*,#6286,.T.);
++#6289=ORIENTED_EDGE('',*,*,#6288,.F.);
++#6291=ORIENTED_EDGE('',*,*,#6290,.T.);
++#6293=ORIENTED_EDGE('',*,*,#6292,.F.);
++#6295=ORIENTED_EDGE('',*,*,#6294,.F.);
++#6297=ORIENTED_EDGE('',*,*,#6296,.T.);
++#6299=ORIENTED_EDGE('',*,*,#6298,.F.);
++#6301=ORIENTED_EDGE('',*,*,#6300,.T.);
++#6303=ORIENTED_EDGE('',*,*,#6302,.F.);
++#6305=ORIENTED_EDGE('',*,*,#6304,.F.);
++#6307=ORIENTED_EDGE('',*,*,#6306,.F.);
++#6309=ORIENTED_EDGE('',*,*,#6308,.T.);
++#6311=ORIENTED_EDGE('',*,*,#6310,.F.);
++#6313=ORIENTED_EDGE('',*,*,#6312,.T.);
++#6315=ORIENTED_EDGE('',*,*,#6314,.F.);
++#6317=ORIENTED_EDGE('',*,*,#6316,.T.);
++#6319=ORIENTED_EDGE('',*,*,#6318,.T.);
++#6321=ORIENTED_EDGE('',*,*,#6320,.T.);
++#6323=ORIENTED_EDGE('',*,*,#6322,.F.);
++#6324=ORIENTED_EDGE('',*,*,#5976,.T.);
++#6326=ORIENTED_EDGE('',*,*,#6325,.T.);
++#6327=ORIENTED_EDGE('',*,*,#6157,.T.);
++#6329=ORIENTED_EDGE('',*,*,#6328,.F.);
++#6331=ORIENTED_EDGE('',*,*,#6330,.F.);
++#6332=EDGE_LOOP('',(#6284,#6285,#6287,#6289,#6291,#6293,#6295,#6297,#6299,#6301,
++#6303,#6305,#6307,#6309,#6311,#6313,#6315,#6317,#6319,#6321,#6323,#6324,#6326,
++#6327,#6329,#6331));
++#6333=FACE_OUTER_BOUND('',#6332,.F.);
++#6335=ORIENTED_EDGE('',*,*,#6334,.F.);
++#6337=ORIENTED_EDGE('',*,*,#6336,.F.);
++#6338=EDGE_LOOP('',(#6335,#6337));
++#6339=FACE_BOUND('',#6338,.F.);
++#6341=ORIENTED_EDGE('',*,*,#6340,.F.);
++#6343=ORIENTED_EDGE('',*,*,#6342,.F.);
++#6344=EDGE_LOOP('',(#6341,#6343));
++#6345=FACE_BOUND('',#6344,.F.);
++#6347=ORIENTED_EDGE('',*,*,#6346,.T.);
++#6349=ORIENTED_EDGE('',*,*,#6348,.T.);
++#6350=EDGE_LOOP('',(#6347,#6349));
++#6351=FACE_BOUND('',#6350,.F.);
++#6353=ORIENTED_EDGE('',*,*,#6352,.T.);
++#6355=ORIENTED_EDGE('',*,*,#6354,.T.);
++#6356=EDGE_LOOP('',(#6353,#6355));
++#6357=FACE_BOUND('',#6356,.F.);
++#6359=ORIENTED_EDGE('',*,*,#6358,.F.);
++#6361=ORIENTED_EDGE('',*,*,#6360,.F.);
++#6362=EDGE_LOOP('',(#6359,#6361));
++#6363=FACE_BOUND('',#6362,.F.);
++#6365=ORIENTED_EDGE('',*,*,#6364,.F.);
++#6367=ORIENTED_EDGE('',*,*,#6366,.F.);
++#6368=EDGE_LOOP('',(#6365,#6367));
++#6369=FACE_BOUND('',#6368,.F.);
++#6371=ORIENTED_EDGE('',*,*,#6370,.F.);
++#6373=ORIENTED_EDGE('',*,*,#6372,.F.);
++#6374=EDGE_LOOP('',(#6371,#6373));
++#6375=FACE_BOUND('',#6374,.F.);
++#6377=ORIENTED_EDGE('',*,*,#6376,.F.);
++#6379=ORIENTED_EDGE('',*,*,#6378,.F.);
++#6380=EDGE_LOOP('',(#6377,#6379));
++#6381=FACE_BOUND('',#6380,.F.);
++#6383=ORIENTED_EDGE('',*,*,#6382,.F.);
++#6385=ORIENTED_EDGE('',*,*,#6384,.F.);
++#6386=EDGE_LOOP('',(#6383,#6385));
++#6387=FACE_BOUND('',#6386,.F.);
++#6389=ORIENTED_EDGE('',*,*,#6388,.F.);
++#6391=ORIENTED_EDGE('',*,*,#6390,.F.);
++#6392=EDGE_LOOP('',(#6389,#6391));
++#6393=FACE_BOUND('',#6392,.F.);
++#6395=ORIENTED_EDGE('',*,*,#6394,.F.);
++#6397=ORIENTED_EDGE('',*,*,#6396,.F.);
++#6398=EDGE_LOOP('',(#6395,#6397));
++#6399=FACE_BOUND('',#6398,.F.);
++#6401=ORIENTED_EDGE('',*,*,#6400,.T.);
++#6403=ORIENTED_EDGE('',*,*,#6402,.F.);
++#6405=ORIENTED_EDGE('',*,*,#6404,.F.);
++#6407=ORIENTED_EDGE('',*,*,#6406,.F.);
++#6409=ORIENTED_EDGE('',*,*,#6408,.T.);
++#6411=ORIENTED_EDGE('',*,*,#6410,.F.);
++#6413=ORIENTED_EDGE('',*,*,#6412,.T.);
++#6415=ORIENTED_EDGE('',*,*,#6414,.F.);
++#6416=EDGE_LOOP('',(#6401,#6403,#6405,#6407,#6409,#6411,#6413,#6415));
++#6417=FACE_BOUND('',#6416,.F.);
++#6419=ORIENTED_EDGE('',*,*,#6418,.F.);
++#6421=ORIENTED_EDGE('',*,*,#6420,.F.);
++#6423=ORIENTED_EDGE('',*,*,#6422,.T.);
++#6425=ORIENTED_EDGE('',*,*,#6424,.F.);
++#6427=ORIENTED_EDGE('',*,*,#6426,.T.);
++#6429=ORIENTED_EDGE('',*,*,#6428,.F.);
++#6431=ORIENTED_EDGE('',*,*,#6430,.T.);
++#6433=ORIENTED_EDGE('',*,*,#6432,.F.);
++#6435=ORIENTED_EDGE('',*,*,#6434,.F.);
++#6437=ORIENTED_EDGE('',*,*,#6436,.F.);
++#6439=ORIENTED_EDGE('',*,*,#6438,.F.);
++#6441=ORIENTED_EDGE('',*,*,#6440,.T.);
++#6443=ORIENTED_EDGE('',*,*,#6442,.F.);
++#6445=ORIENTED_EDGE('',*,*,#6444,.F.);
++#6447=ORIENTED_EDGE('',*,*,#6446,.T.);
++#6449=ORIENTED_EDGE('',*,*,#6448,.F.);
++#6450=EDGE_LOOP('',(#6419,#6421,#6423,#6425,#6427,#6429,#6431,#6433,#6435,#6437,
++#6439,#6441,#6443,#6445,#6447,#6449));
++#6451=FACE_BOUND('',#6450,.F.);
++#6453=ORIENTED_EDGE('',*,*,#6452,.F.);
++#6455=ORIENTED_EDGE('',*,*,#6454,.F.);
++#6456=EDGE_LOOP('',(#6453,#6455));
++#6457=FACE_BOUND('',#6456,.F.);
++#6459=ORIENTED_EDGE('',*,*,#6458,.F.);
++#6461=ORIENTED_EDGE('',*,*,#6460,.F.);
++#6462=EDGE_LOOP('',(#6459,#6461));
++#6463=FACE_BOUND('',#6462,.F.);
++#6465=ORIENTED_EDGE('',*,*,#6464,.F.);
++#6467=ORIENTED_EDGE('',*,*,#6466,.F.);
++#6468=EDGE_LOOP('',(#6465,#6467));
++#6469=FACE_BOUND('',#6468,.F.);
++#6471=ORIENTED_EDGE('',*,*,#6470,.F.);
++#6473=ORIENTED_EDGE('',*,*,#6472,.F.);
++#6474=EDGE_LOOP('',(#6471,#6473));
++#6475=FACE_BOUND('',#6474,.F.);
++#6477=ORIENTED_EDGE('',*,*,#6476,.F.);
++#6479=ORIENTED_EDGE('',*,*,#6478,.F.);
++#6480=EDGE_LOOP('',(#6477,#6479));
++#6481=FACE_BOUND('',#6480,.F.);
++#6483=ORIENTED_EDGE('',*,*,#6482,.F.);
++#6485=ORIENTED_EDGE('',*,*,#6484,.F.);
++#6486=EDGE_LOOP('',(#6483,#6485));
++#6487=FACE_BOUND('',#6486,.F.);
++#6488=ADVANCED_FACE('',(#6333,#6339,#6345,#6351,#6357,#6363,#6369,#6375,#6381,
++#6387,#6393,#6399,#6417,#6451,#6457,#6463,#6469,#6475,#6481,#6487),#6283,.T.);
++#6489=CARTESIAN_POINT('',(6.45E0,1.176878221735E0,2.975E1));
++#6490=DIRECTION('',(0.E0,1.E0,0.E0));
++#6491=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6492=AXIS2_PLACEMENT_3D('',#6489,#6490,#6491);
++#6493=CYLINDRICAL_SURFACE('',#6492,1.E-1);
++#6494=ORIENTED_EDGE('',*,*,#6334,.T.);
++#6496=ORIENTED_EDGE('',*,*,#6495,.F.);
++#6498=ORIENTED_EDGE('',*,*,#6497,.F.);
++#6500=ORIENTED_EDGE('',*,*,#6499,.T.);
++#6501=EDGE_LOOP('',(#6494,#6496,#6498,#6500));
++#6502=FACE_OUTER_BOUND('',#6501,.F.);
++#6503=ADVANCED_FACE('',(#6502),#6493,.F.);
++#6504=CARTESIAN_POINT('',(6.45E0,1.176878221735E0,2.975E1));
++#6505=DIRECTION('',(0.E0,1.E0,0.E0));
++#6506=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6507=AXIS2_PLACEMENT_3D('',#6504,#6505,#6506);
++#6508=CYLINDRICAL_SURFACE('',#6507,1.E-1);
++#6509=ORIENTED_EDGE('',*,*,#6336,.T.);
++#6510=ORIENTED_EDGE('',*,*,#6499,.F.);
++#6512=ORIENTED_EDGE('',*,*,#6511,.T.);
++#6513=ORIENTED_EDGE('',*,*,#6495,.T.);
++#6514=EDGE_LOOP('',(#6509,#6510,#6512,#6513));
++#6515=FACE_OUTER_BOUND('',#6514,.F.);
++#6516=ADVANCED_FACE('',(#6515),#6508,.F.);
++#6517=CARTESIAN_POINT('',(6.45E0,1.234346967234E0,2.975E1));
++#6518=DIRECTION('',(0.E0,1.E0,0.E0));
++#6519=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6520=AXIS2_PLACEMENT_3D('',#6517,#6518,#6519);
++#6521=CONICAL_SURFACE('',#6520,7.288815195685E-2,6.E1);
++#6523=ORIENTED_EDGE('',*,*,#6522,.T.);
++#6524=ORIENTED_EDGE('',*,*,#6511,.F.);
++#6526=ORIENTED_EDGE('',*,*,#6525,.F.);
++#6527=EDGE_LOOP('',(#6523,#6524,#6526));
++#6528=FACE_OUTER_BOUND('',#6527,.F.);
++#6529=ADVANCED_FACE('',(#6528),#6521,.F.);
++#6530=CARTESIAN_POINT('',(6.45E0,1.234346967234E0,2.975E1));
++#6531=DIRECTION('',(0.E0,1.E0,0.E0));
++#6532=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6533=AXIS2_PLACEMENT_3D('',#6530,#6531,#6532);
++#6534=CONICAL_SURFACE('',#6533,7.288815195685E-2,6.E1);
++#6535=ORIENTED_EDGE('',*,*,#6522,.F.);
++#6536=ORIENTED_EDGE('',*,*,#6525,.T.);
++#6537=ORIENTED_EDGE('',*,*,#6497,.T.);
++#6538=EDGE_LOOP('',(#6535,#6536,#6537));
++#6539=FACE_OUTER_BOUND('',#6538,.F.);
++#6540=ADVANCED_FACE('',(#6539),#6534,.F.);
++#6541=CARTESIAN_POINT('',(7.45E0,1.176878221735E0,2.975E1));
++#6542=DIRECTION('',(0.E0,1.E0,0.E0));
++#6543=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6544=AXIS2_PLACEMENT_3D('',#6541,#6542,#6543);
++#6545=CYLINDRICAL_SURFACE('',#6544,1.E-1);
++#6546=ORIENTED_EDGE('',*,*,#6340,.T.);
++#6548=ORIENTED_EDGE('',*,*,#6547,.F.);
++#6550=ORIENTED_EDGE('',*,*,#6549,.F.);
++#6552=ORIENTED_EDGE('',*,*,#6551,.T.);
++#6553=EDGE_LOOP('',(#6546,#6548,#6550,#6552));
++#6554=FACE_OUTER_BOUND('',#6553,.F.);
++#6555=ADVANCED_FACE('',(#6554),#6545,.F.);
++#6556=CARTESIAN_POINT('',(7.45E0,1.176878221735E0,2.975E1));
++#6557=DIRECTION('',(0.E0,1.E0,0.E0));
++#6558=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6559=AXIS2_PLACEMENT_3D('',#6556,#6557,#6558);
++#6560=CYLINDRICAL_SURFACE('',#6559,1.E-1);
++#6561=ORIENTED_EDGE('',*,*,#6342,.T.);
++#6562=ORIENTED_EDGE('',*,*,#6551,.F.);
++#6564=ORIENTED_EDGE('',*,*,#6563,.T.);
++#6565=ORIENTED_EDGE('',*,*,#6547,.T.);
++#6566=EDGE_LOOP('',(#6561,#6562,#6564,#6565));
++#6567=FACE_OUTER_BOUND('',#6566,.F.);
++#6568=ADVANCED_FACE('',(#6567),#6560,.F.);
++#6569=CARTESIAN_POINT('',(7.45E0,1.234346967234E0,2.975E1));
++#6570=DIRECTION('',(0.E0,1.E0,0.E0));
++#6571=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6572=AXIS2_PLACEMENT_3D('',#6569,#6570,#6571);
++#6573=CONICAL_SURFACE('',#6572,7.288815195685E-2,6.E1);
++#6575=ORIENTED_EDGE('',*,*,#6574,.T.);
++#6576=ORIENTED_EDGE('',*,*,#6563,.F.);
++#6578=ORIENTED_EDGE('',*,*,#6577,.F.);
++#6579=EDGE_LOOP('',(#6575,#6576,#6578));
++#6580=FACE_OUTER_BOUND('',#6579,.F.);
++#6581=ADVANCED_FACE('',(#6580),#6573,.F.);
++#6582=CARTESIAN_POINT('',(7.45E0,1.234346967234E0,2.975E1));
++#6583=DIRECTION('',(0.E0,1.E0,0.E0));
++#6584=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6585=AXIS2_PLACEMENT_3D('',#6582,#6583,#6584);
++#6586=CONICAL_SURFACE('',#6585,7.288815195685E-2,6.E1);
++#6587=ORIENTED_EDGE('',*,*,#6574,.F.);
++#6588=ORIENTED_EDGE('',*,*,#6577,.T.);
++#6589=ORIENTED_EDGE('',*,*,#6549,.T.);
++#6590=EDGE_LOOP('',(#6587,#6588,#6589));
++#6591=FACE_OUTER_BOUND('',#6590,.F.);
++#6592=ADVANCED_FACE('',(#6591),#6586,.F.);
++#6593=CARTESIAN_POINT('',(2.046862696660E1,-7.805924235695E-2,7.E0));
++#6594=DIRECTION('',(0.E0,1.E0,0.E0));
++#6595=DIRECTION('',(0.E0,0.E0,1.E0));
++#6596=AXIS2_PLACEMENT_3D('',#6593,#6594,#6595);
++#6597=CYLINDRICAL_SURFACE('',#6596,1.E0);
++#6598=ORIENTED_EDGE('',*,*,#5961,.F.);
++#6599=ORIENTED_EDGE('',*,*,#5550,.T.);
++#6601=ORIENTED_EDGE('',*,*,#6600,.T.);
++#6602=ORIENTED_EDGE('',*,*,#6221,.T.);
++#6603=EDGE_LOOP('',(#6598,#6599,#6601,#6602));
++#6604=FACE_OUTER_BOUND('',#6603,.F.);
++#6605=ADVANCED_FACE('',(#6604),#6597,.F.);
++#6606=CARTESIAN_POINT('',(1.65E1,1.562633489099E0,7.5E0));
++#6607=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6608=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6609=AXIS2_PLACEMENT_3D('',#6606,#6607,#6608);
++#6610=CYLINDRICAL_SURFACE('',#6609,5.E0);
++#6611=ORIENTED_EDGE('',*,*,#6600,.F.);
++#6612=ORIENTED_EDGE('',*,*,#5548,.T.);
++#6614=ORIENTED_EDGE('',*,*,#6613,.F.);
++#6615=ORIENTED_EDGE('',*,*,#6223,.T.);
++#6616=EDGE_LOOP('',(#6611,#6612,#6614,#6615));
++#6617=FACE_OUTER_BOUND('',#6616,.F.);
++#6618=ADVANCED_FACE('',(#6617),#6610,.F.);
++#6619=CARTESIAN_POINT('',(2.15E1,1.5E0,2.5E0));
++#6620=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6621=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6622=AXIS2_PLACEMENT_3D('',#6619,#6620,#6621);
++#6623=PLANE('',#6622);
++#6625=ORIENTED_EDGE('',*,*,#6624,.F.);
++#6626=ORIENTED_EDGE('',*,*,#6225,.F.);
++#6627=ORIENTED_EDGE('',*,*,#6613,.T.);
++#6628=ORIENTED_EDGE('',*,*,#5546,.T.);
++#6629=EDGE_LOOP('',(#6625,#6626,#6627,#6628));
++#6630=FACE_OUTER_BOUND('',#6629,.F.);
++#6631=ADVANCED_FACE('',(#6630),#6623,.F.);
++#6632=CARTESIAN_POINT('',(7.5E0,1.562633489099E0,7.5E0));
++#6633=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6634=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6635=AXIS2_PLACEMENT_3D('',#6632,#6633,#6634);
++#6636=CYLINDRICAL_SURFACE('',#6635,5.E0);
++#6638=ORIENTED_EDGE('',*,*,#6637,.F.);
++#6639=ORIENTED_EDGE('',*,*,#6227,.T.);
++#6640=ORIENTED_EDGE('',*,*,#6624,.T.);
++#6641=ORIENTED_EDGE('',*,*,#5544,.T.);
++#6642=EDGE_LOOP('',(#6638,#6639,#6640,#6641));
++#6643=FACE_OUTER_BOUND('',#6642,.F.);
++#6644=ADVANCED_FACE('',(#6643),#6636,.F.);
++#6645=CARTESIAN_POINT('',(3.531373033403E0,1.157860978230E1,7.E0));
++#6646=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6647=DIRECTION('',(0.E0,0.E0,1.E0));
++#6648=AXIS2_PLACEMENT_3D('',#6645,#6646,#6647);
++#6649=CYLINDRICAL_SURFACE('',#6648,1.E0);
++#6650=ORIENTED_EDGE('',*,*,#5991,.F.);
++#6651=ORIENTED_EDGE('',*,*,#6229,.T.);
++#6652=ORIENTED_EDGE('',*,*,#6637,.T.);
++#6653=ORIENTED_EDGE('',*,*,#5542,.T.);
++#6654=EDGE_LOOP('',(#6650,#6651,#6652,#6653));
++#6655=FACE_OUTER_BOUND('',#6654,.F.);
++#6656=ADVANCED_FACE('',(#6655),#6649,.F.);
++#6657=CARTESIAN_POINT('',(-1.E0,1.161044894892E1,7.E0));
++#6658=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6659=DIRECTION('',(1.E0,0.E0,0.E0));
++#6660=AXIS2_PLACEMENT_3D('',#6657,#6658,#6659);
++#6661=CYLINDRICAL_SURFACE('',#6660,1.E0);
++#6663=ORIENTED_EDGE('',*,*,#6662,.F.);
++#6664=ORIENTED_EDGE('',*,*,#6232,.T.);
++#6665=ORIENTED_EDGE('',*,*,#5987,.T.);
++#6666=ORIENTED_EDGE('',*,*,#5508,.T.);
++#6667=EDGE_LOOP('',(#6663,#6664,#6665,#6666));
++#6668=FACE_OUTER_BOUND('',#6667,.F.);
++#6669=ADVANCED_FACE('',(#6668),#6661,.F.);
++#6670=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
++#6671=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6672=DIRECTION('',(0.E0,0.E0,1.E0));
++#6673=AXIS2_PLACEMENT_3D('',#6670,#6671,#6672);
++#6674=PLANE('',#6673);
++#6676=ORIENTED_EDGE('',*,*,#6675,.T.);
++#6677=ORIENTED_EDGE('',*,*,#6302,.T.);
++#6679=ORIENTED_EDGE('',*,*,#6678,.F.);
++#6680=ORIENTED_EDGE('',*,*,#5520,.F.);
++#6681=EDGE_LOOP('',(#6676,#6677,#6679,#6680));
++#6682=FACE_OUTER_BOUND('',#6681,.F.);
++#6683=ADVANCED_FACE('',(#6682),#6674,.T.);
++#6684=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
++#6685=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6686=DIRECTION('',(0.E0,0.E0,1.E0));
++#6687=AXIS2_PLACEMENT_3D('',#6684,#6685,#6686);
++#6688=PLANE('',#6687);
++#6689=ORIENTED_EDGE('',*,*,#6662,.T.);
++#6690=ORIENTED_EDGE('',*,*,#5506,.F.);
++#6692=ORIENTED_EDGE('',*,*,#6691,.T.);
++#6693=ORIENTED_EDGE('',*,*,#6234,.T.);
++#6694=EDGE_LOOP('',(#6689,#6690,#6692,#6693));
++#6695=FACE_OUTER_BOUND('',#6694,.F.);
++#6696=ADVANCED_FACE('',(#6695),#6688,.T.);
++#6697=CARTESIAN_POINT('',(-1.E0,-5.722942641981E-2,1.325E1));
++#6698=DIRECTION('',(0.E0,1.E0,0.E0));
++#6699=DIRECTION('',(1.E0,0.E0,0.E0));
++#6700=AXIS2_PLACEMENT_3D('',#6697,#6698,#6699);
++#6701=CYLINDRICAL_SURFACE('',#6700,1.E0);
++#6702=ORIENTED_EDGE('',*,*,#6675,.F.);
++#6703=ORIENTED_EDGE('',*,*,#5518,.T.);
++#6705=ORIENTED_EDGE('',*,*,#6704,.T.);
++#6706=ORIENTED_EDGE('',*,*,#6304,.T.);
++#6707=EDGE_LOOP('',(#6702,#6703,#6705,#6706));
++#6708=FACE_OUTER_BOUND('',#6707,.F.);
++#6709=ADVANCED_FACE('',(#6708),#6701,.F.);
++#6710=CARTESIAN_POINT('',(-2.E0,0.E0,1.225E1));
++#6711=DIRECTION('',(0.E0,0.E0,1.E0));
++#6712=DIRECTION('',(1.E0,0.E0,0.E0));
++#6713=AXIS2_PLACEMENT_3D('',#6710,#6711,#6712);
++#6714=PLANE('',#6713);
++#6716=ORIENTED_EDGE('',*,*,#6715,.F.);
++#6717=ORIENTED_EDGE('',*,*,#6442,.T.);
++#6719=ORIENTED_EDGE('',*,*,#6718,.F.);
++#6720=ORIENTED_EDGE('',*,*,#5668,.F.);
++#6721=EDGE_LOOP('',(#6716,#6717,#6719,#6720));
++#6722=FACE_OUTER_BOUND('',#6721,.F.);
++#6723=ADVANCED_FACE('',(#6722),#6714,.T.);
++#6724=CARTESIAN_POINT('',(-2.E0,0.E0,1.225E1));
++#6725=DIRECTION('',(0.E0,0.E0,1.E0));
++#6726=DIRECTION('',(1.E0,0.E0,0.E0));
++#6727=AXIS2_PLACEMENT_3D('',#6724,#6725,#6726);
++#6728=PLANE('',#6727);
++#6729=ORIENTED_EDGE('',*,*,#6704,.F.);
++#6730=ORIENTED_EDGE('',*,*,#5516,.F.);
++#6732=ORIENTED_EDGE('',*,*,#6731,.T.);
++#6733=ORIENTED_EDGE('',*,*,#6306,.T.);
++#6734=EDGE_LOOP('',(#6729,#6730,#6732,#6733));
++#6735=FACE_OUTER_BOUND('',#6734,.F.);
++#6736=ADVANCED_FACE('',(#6735),#6728,.T.);
++#6737=CARTESIAN_POINT('',(3.5E0,1.566978255297E0,1.325E1));
++#6738=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6739=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6740=AXIS2_PLACEMENT_3D('',#6737,#6738,#6739);
++#6741=CYLINDRICAL_SURFACE('',#6740,1.E0);
++#6743=ORIENTED_EDGE('',*,*,#6742,.F.);
++#6744=ORIENTED_EDGE('',*,*,#6444,.T.);
++#6745=ORIENTED_EDGE('',*,*,#6715,.T.);
++#6746=ORIENTED_EDGE('',*,*,#5666,.T.);
++#6747=EDGE_LOOP('',(#6743,#6744,#6745,#6746));
++#6748=FACE_OUTER_BOUND('',#6747,.F.);
++#6749=ADVANCED_FACE('',(#6748),#6741,.F.);
++#6750=CARTESIAN_POINT('',(2.5E0,1.5E0,2.5E0));
++#6751=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6752=DIRECTION('',(0.E0,0.E0,1.E0));
++#6753=AXIS2_PLACEMENT_3D('',#6750,#6751,#6752);
++#6754=PLANE('',#6753);
++#6756=ORIENTED_EDGE('',*,*,#6755,.T.);
++#6757=ORIENTED_EDGE('',*,*,#5650,.T.);
++#6759=ORIENTED_EDGE('',*,*,#6758,.F.);
++#6760=ORIENTED_EDGE('',*,*,#6408,.F.);
++#6761=EDGE_LOOP('',(#6756,#6757,#6759,#6760));
++#6762=FACE_OUTER_BOUND('',#6761,.F.);
++#6763=ADVANCED_FACE('',(#6762),#6754,.F.);
++#6764=CARTESIAN_POINT('',(2.5E0,1.5E0,2.5E0));
++#6765=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6766=DIRECTION('',(0.E0,0.E0,1.E0));
++#6767=AXIS2_PLACEMENT_3D('',#6764,#6765,#6766);
++#6768=PLANE('',#6767);
++#6770=ORIENTED_EDGE('',*,*,#6769,.T.);
++#6771=ORIENTED_EDGE('',*,*,#6446,.F.);
++#6772=ORIENTED_EDGE('',*,*,#6742,.T.);
++#6773=ORIENTED_EDGE('',*,*,#5664,.T.);
++#6774=EDGE_LOOP('',(#6770,#6771,#6772,#6773));
++#6775=FACE_OUTER_BOUND('',#6774,.F.);
++#6776=ADVANCED_FACE('',(#6775),#6768,.F.);
++#6777=CARTESIAN_POINT('',(5.5E0,1.568923974228E0,2.19375E1));
++#6778=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6779=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6780=AXIS2_PLACEMENT_3D('',#6777,#6778,#6779);
++#6781=CYLINDRICAL_SURFACE('',#6780,3.E0);
++#6782=ORIENTED_EDGE('',*,*,#6755,.F.);
++#6783=ORIENTED_EDGE('',*,*,#6406,.T.);
++#6785=ORIENTED_EDGE('',*,*,#6784,.T.);
++#6786=ORIENTED_EDGE('',*,*,#5652,.T.);
++#6787=EDGE_LOOP('',(#6782,#6783,#6785,#6786));
++#6788=FACE_OUTER_BOUND('',#6787,.F.);
++#6789=ADVANCED_FACE('',(#6788),#6781,.F.);
++#6790=CARTESIAN_POINT('',(2.5E0,0.E0,1.89375E1));
++#6791=DIRECTION('',(0.E0,0.E0,1.E0));
++#6792=DIRECTION('',(1.E0,0.E0,0.E0));
++#6793=AXIS2_PLACEMENT_3D('',#6790,#6791,#6792);
++#6794=PLANE('',#6793);
++#6795=ORIENTED_EDGE('',*,*,#6784,.F.);
++#6796=ORIENTED_EDGE('',*,*,#6404,.T.);
++#6798=ORIENTED_EDGE('',*,*,#6797,.F.);
++#6799=ORIENTED_EDGE('',*,*,#5638,.F.);
++#6800=EDGE_LOOP('',(#6795,#6796,#6798,#6799));
++#6801=FACE_OUTER_BOUND('',#6800,.F.);
++#6802=ADVANCED_FACE('',(#6801),#6794,.T.);
++#6803=CARTESIAN_POINT('',(1.85E1,-5.889194178308E-2,2.19375E1));
++#6804=DIRECTION('',(0.E0,1.E0,0.E0));
++#6805=DIRECTION('',(1.E0,0.E0,0.E0));
++#6806=AXIS2_PLACEMENT_3D('',#6803,#6804,#6805);
++#6807=CYLINDRICAL_SURFACE('',#6806,3.E0);
++#6809=ORIENTED_EDGE('',*,*,#6808,.F.);
++#6810=ORIENTED_EDGE('',*,*,#5640,.T.);
++#6811=ORIENTED_EDGE('',*,*,#6797,.T.);
++#6812=ORIENTED_EDGE('',*,*,#6402,.T.);
++#6813=EDGE_LOOP('',(#6809,#6810,#6811,#6812));
++#6814=FACE_OUTER_BOUND('',#6813,.F.);
++#6815=ADVANCED_FACE('',(#6814),#6807,.F.);
++#6816=CARTESIAN_POINT('',(2.15E1,1.5E0,2.95E1));
++#6817=DIRECTION('',(1.E0,0.E0,0.E0));
++#6818=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6819=AXIS2_PLACEMENT_3D('',#6816,#6817,#6818);
++#6820=PLANE('',#6819);
++#6821=ORIENTED_EDGE('',*,*,#6808,.T.);
++#6822=ORIENTED_EDGE('',*,*,#6400,.F.);
++#6824=ORIENTED_EDGE('',*,*,#6823,.T.);
++#6825=ORIENTED_EDGE('',*,*,#5642,.T.);
++#6826=EDGE_LOOP('',(#6821,#6822,#6824,#6825));
++#6827=FACE_OUTER_BOUND('',#6826,.F.);
++#6828=ADVANCED_FACE('',(#6827),#6820,.F.);
++#6829=CARTESIAN_POINT('',(2.15E1,1.5E0,2.95E1));
++#6830=DIRECTION('',(1.E0,0.E0,0.E0));
++#6831=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6832=AXIS2_PLACEMENT_3D('',#6829,#6830,#6831);
++#6833=PLANE('',#6832);
++#6835=ORIENTED_EDGE('',*,*,#6834,.T.);
++#6836=ORIENTED_EDGE('',*,*,#5656,.T.);
++#6838=ORIENTED_EDGE('',*,*,#6837,.T.);
++#6839=ORIENTED_EDGE('',*,*,#6422,.F.);
++#6840=EDGE_LOOP('',(#6835,#6836,#6838,#6839));
++#6841=FACE_OUTER_BOUND('',#6840,.F.);
++#6842=ADVANCED_FACE('',(#6841),#6833,.F.);
++#6843=CARTESIAN_POINT('',(1.65E1,1.562633489099E0,2.45E1));
++#6844=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6845=DIRECTION('',(1.E0,0.E0,0.E0));
++#6846=AXIS2_PLACEMENT_3D('',#6843,#6844,#6845);
++#6847=CYLINDRICAL_SURFACE('',#6846,5.E0);
++#6848=ORIENTED_EDGE('',*,*,#6823,.F.);
++#6849=ORIENTED_EDGE('',*,*,#6414,.T.);
++#6851=ORIENTED_EDGE('',*,*,#6850,.T.);
++#6852=ORIENTED_EDGE('',*,*,#5644,.T.);
++#6853=EDGE_LOOP('',(#6848,#6849,#6851,#6852));
++#6854=FACE_OUTER_BOUND('',#6853,.F.);
++#6855=ADVANCED_FACE('',(#6854),#6847,.F.);
++#6856=CARTESIAN_POINT('',(2.5E0,1.5E0,2.95E1));
++#6857=DIRECTION('',(0.E0,0.E0,1.E0));
++#6858=DIRECTION('',(1.E0,0.E0,0.E0));
++#6859=AXIS2_PLACEMENT_3D('',#6856,#6857,#6858);
++#6860=PLANE('',#6859);
++#6862=ORIENTED_EDGE('',*,*,#6861,.T.);
++#6863=ORIENTED_EDGE('',*,*,#5646,.T.);
++#6864=ORIENTED_EDGE('',*,*,#6850,.F.);
++#6865=ORIENTED_EDGE('',*,*,#6412,.F.);
++#6866=EDGE_LOOP('',(#6862,#6863,#6864,#6865));
++#6867=FACE_OUTER_BOUND('',#6866,.F.);
++#6868=ADVANCED_FACE('',(#6867),#6860,.F.);
++#6869=CARTESIAN_POINT('',(7.5E0,1.562633489099E0,2.45E1));
++#6870=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6871=DIRECTION('',(0.E0,0.E0,1.E0));
++#6872=AXIS2_PLACEMENT_3D('',#6869,#6870,#6871);
++#6873=CYLINDRICAL_SURFACE('',#6872,5.E0);
++#6874=ORIENTED_EDGE('',*,*,#6861,.F.);
++#6875=ORIENTED_EDGE('',*,*,#6410,.T.);
++#6876=ORIENTED_EDGE('',*,*,#6758,.T.);
++#6877=ORIENTED_EDGE('',*,*,#5648,.T.);
++#6878=EDGE_LOOP('',(#6874,#6875,#6876,#6877));
++#6879=FACE_OUTER_BOUND('',#6878,.F.);
++#6880=ADVANCED_FACE('',(#6879),#6873,.F.);
++#6881=CARTESIAN_POINT('',(1.85E1,1.568923974228E0,1.40625E1));
++#6882=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6883=DIRECTION('',(1.E0,0.E0,0.E0));
++#6884=AXIS2_PLACEMENT_3D('',#6881,#6882,#6883);
++#6885=CYLINDRICAL_SURFACE('',#6884,3.E0);
++#6886=ORIENTED_EDGE('',*,*,#6834,.F.);
++#6887=ORIENTED_EDGE('',*,*,#6420,.T.);
++#6889=ORIENTED_EDGE('',*,*,#6888,.T.);
++#6890=ORIENTED_EDGE('',*,*,#5658,.T.);
++#6891=EDGE_LOOP('',(#6886,#6887,#6889,#6890));
++#6892=FACE_OUTER_BOUND('',#6891,.F.);
++#6893=ADVANCED_FACE('',(#6892),#6885,.F.);
++#6894=CARTESIAN_POINT('',(2.15E1,0.E0,1.70625E1));
++#6895=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6896=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6897=AXIS2_PLACEMENT_3D('',#6894,#6895,#6896);
++#6898=PLANE('',#6897);
++#6899=ORIENTED_EDGE('',*,*,#6888,.F.);
++#6900=ORIENTED_EDGE('',*,*,#6418,.T.);
++#6902=ORIENTED_EDGE('',*,*,#6901,.F.);
++#6903=ORIENTED_EDGE('',*,*,#5660,.F.);
++#6904=EDGE_LOOP('',(#6899,#6900,#6902,#6903));
++#6905=FACE_OUTER_BOUND('',#6904,.F.);
++#6906=ADVANCED_FACE('',(#6905),#6898,.T.);
++#6907=CARTESIAN_POINT('',(5.5E0,-5.889194178308E-2,1.40625E1));
++#6908=DIRECTION('',(0.E0,1.E0,0.E0));
++#6909=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6910=AXIS2_PLACEMENT_3D('',#6907,#6908,#6909);
++#6911=CYLINDRICAL_SURFACE('',#6910,3.E0);
++#6912=ORIENTED_EDGE('',*,*,#6769,.F.);
++#6913=ORIENTED_EDGE('',*,*,#5662,.T.);
++#6914=ORIENTED_EDGE('',*,*,#6901,.T.);
++#6915=ORIENTED_EDGE('',*,*,#6448,.T.);
++#6916=EDGE_LOOP('',(#6912,#6913,#6914,#6915));
++#6917=FACE_OUTER_BOUND('',#6916,.F.);
++#6918=ADVANCED_FACE('',(#6917),#6911,.F.);
++#6919=CARTESIAN_POINT('',(2.05E1,-5.889194178308E-2,1.325E1));
++#6920=DIRECTION('',(0.E0,1.E0,0.E0));
++#6921=DIRECTION('',(1.E0,0.E0,0.E0));
++#6922=AXIS2_PLACEMENT_3D('',#6919,#6920,#6921);
++#6923=CYLINDRICAL_SURFACE('',#6922,1.E0);
++#6924=ORIENTED_EDGE('',*,*,#6837,.F.);
++#6925=ORIENTED_EDGE('',*,*,#5686,.T.);
++#6927=ORIENTED_EDGE('',*,*,#6926,.T.);
++#6928=ORIENTED_EDGE('',*,*,#6424,.T.);
++#6929=EDGE_LOOP('',(#6924,#6925,#6927,#6928));
++#6930=FACE_OUTER_BOUND('',#6929,.F.);
++#6931=ADVANCED_FACE('',(#6930),#6923,.F.);
++#6932=CARTESIAN_POINT('',(2.6E1,0.E0,1.225E1));
++#6933=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6934=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6935=AXIS2_PLACEMENT_3D('',#6932,#6933,#6934);
++#6936=PLANE('',#6935);
++#6938=ORIENTED_EDGE('',*,*,#6937,.F.);
++#6939=ORIENTED_EDGE('',*,*,#6290,.F.);
++#6941=ORIENTED_EDGE('',*,*,#6940,.T.);
++#6942=ORIENTED_EDGE('',*,*,#5532,.T.);
++#6943=EDGE_LOOP('',(#6938,#6939,#6941,#6942));
++#6944=FACE_OUTER_BOUND('',#6943,.F.);
++#6945=ADVANCED_FACE('',(#6944),#6936,.F.);
++#6946=CARTESIAN_POINT('',(2.6E1,0.E0,1.225E1));
++#6947=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6948=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6949=AXIS2_PLACEMENT_3D('',#6946,#6947,#6948);
++#6950=PLANE('',#6949);
++#6951=ORIENTED_EDGE('',*,*,#6926,.F.);
++#6952=ORIENTED_EDGE('',*,*,#5684,.T.);
++#6954=ORIENTED_EDGE('',*,*,#6953,.F.);
++#6955=ORIENTED_EDGE('',*,*,#6426,.F.);
++#6956=EDGE_LOOP('',(#6951,#6952,#6954,#6955));
++#6957=FACE_OUTER_BOUND('',#6956,.F.);
++#6958=ADVANCED_FACE('',(#6957),#6950,.F.);
++#6959=CARTESIAN_POINT('',(2.5E1,1.568923974228E0,1.325E1));
++#6960=DIRECTION('',(0.E0,-1.E0,0.E0));
++#6961=DIRECTION('',(-1.E0,0.E0,0.E0));
++#6962=AXIS2_PLACEMENT_3D('',#6959,#6960,#6961);
++#6963=CYLINDRICAL_SURFACE('',#6962,1.E0);
++#6965=ORIENTED_EDGE('',*,*,#6964,.F.);
++#6966=ORIENTED_EDGE('',*,*,#6292,.T.);
++#6967=ORIENTED_EDGE('',*,*,#6937,.T.);
++#6968=ORIENTED_EDGE('',*,*,#5530,.T.);
++#6969=EDGE_LOOP('',(#6965,#6966,#6967,#6968));
++#6970=FACE_OUTER_BOUND('',#6969,.F.);
++#6971=ADVANCED_FACE('',(#6970),#6963,.F.);
++#6972=CARTESIAN_POINT('',(2.4E1,0.E0,3.2E1));
++#6973=DIRECTION('',(1.E0,0.E0,0.E0));
++#6974=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6975=AXIS2_PLACEMENT_3D('',#6972,#6973,#6974);
++#6976=PLANE('',#6975);
++#6977=ORIENTED_EDGE('',*,*,#6964,.T.);
++#6978=ORIENTED_EDGE('',*,*,#5528,.F.);
++#6980=ORIENTED_EDGE('',*,*,#6979,.T.);
++#6981=ORIENTED_EDGE('',*,*,#6294,.T.);
++#6982=EDGE_LOOP('',(#6977,#6978,#6980,#6981));
++#6983=FACE_OUTER_BOUND('',#6982,.F.);
++#6984=ADVANCED_FACE('',(#6983),#6976,.T.);
++#6985=CARTESIAN_POINT('',(2.4E1,0.E0,3.2E1));
++#6986=DIRECTION('',(1.E0,0.E0,0.E0));
++#6987=DIRECTION('',(0.E0,0.E0,-1.E0));
++#6988=AXIS2_PLACEMENT_3D('',#6985,#6986,#6987);
++#6989=PLANE('',#6988);
++#6991=ORIENTED_EDGE('',*,*,#6990,.T.);
++#6992=ORIENTED_EDGE('',*,*,#6242,.T.);
++#6994=ORIENTED_EDGE('',*,*,#6993,.F.);
++#6995=ORIENTED_EDGE('',*,*,#5498,.F.);
++#6996=EDGE_LOOP('',(#6991,#6992,#6994,#6995));
++#6997=FACE_OUTER_BOUND('',#6996,.F.);
++#6998=ADVANCED_FACE('',(#6997),#6989,.T.);
++#6999=CARTESIAN_POINT('',(2.4E1,0.E0,2.8E1));
++#7000=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#7001=DIRECTION('',(0.E0,1.E0,0.E0));
++#7002=AXIS2_PLACEMENT_3D('',#6999,#7000,#7001);
++#7003=PLANE('',#7002);
++#7004=ORIENTED_EDGE('',*,*,#6979,.F.);
++#7005=ORIENTED_EDGE('',*,*,#5526,.T.);
++#7007=ORIENTED_EDGE('',*,*,#7006,.T.);
++#7008=ORIENTED_EDGE('',*,*,#6296,.F.);
++#7009=EDGE_LOOP('',(#7004,#7005,#7007,#7008));
++#7010=FACE_OUTER_BOUND('',#7009,.F.);
++#7011=ADVANCED_FACE('',(#7010),#7003,.T.);
++#7012=CARTESIAN_POINT('',(0.E0,0.E0,3.2E1));
++#7013=DIRECTION('',(0.E0,0.E0,1.E0));
++#7014=DIRECTION('',(1.E0,0.E0,0.E0));
++#7015=AXIS2_PLACEMENT_3D('',#7012,#7013,#7014);
++#7016=PLANE('',#7015);
++#7017=ORIENTED_EDGE('',*,*,#5524,.F.);
++#7019=ORIENTED_EDGE('',*,*,#7018,.T.);
++#7020=ORIENTED_EDGE('',*,*,#6298,.T.);
++#7021=ORIENTED_EDGE('',*,*,#7006,.F.);
++#7022=EDGE_LOOP('',(#7017,#7019,#7020,#7021));
++#7023=FACE_OUTER_BOUND('',#7022,.F.);
++#7024=ADVANCED_FACE('',(#7023),#7016,.T.);
++#7025=CARTESIAN_POINT('',(4.E0,0.E0,3.2E1));
++#7026=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#7027=DIRECTION('',(0.E0,1.E0,0.E0));
++#7028=AXIS2_PLACEMENT_3D('',#7025,#7026,#7027);
++#7029=PLANE('',#7028);
++#7030=ORIENTED_EDGE('',*,*,#7018,.F.);
++#7031=ORIENTED_EDGE('',*,*,#5522,.T.);
++#7032=ORIENTED_EDGE('',*,*,#6678,.T.);
++#7033=ORIENTED_EDGE('',*,*,#6300,.F.);
++#7034=EDGE_LOOP('',(#7030,#7031,#7032,#7033));
++#7035=FACE_OUTER_BOUND('',#7034,.F.);
++#7036=ADVANCED_FACE('',(#7035),#7029,.T.);
++#7037=CARTESIAN_POINT('',(2.5E1,-7.055249658685E-2,7.E0));
++#7038=DIRECTION('',(0.E0,1.E0,0.E0));
++#7039=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7040=AXIS2_PLACEMENT_3D('',#7037,#7038,#7039);
++#7041=CYLINDRICAL_SURFACE('',#7040,1.E0);
++#7042=ORIENTED_EDGE('',*,*,#6990,.F.);
++#7043=ORIENTED_EDGE('',*,*,#5496,.T.);
++#7044=ORIENTED_EDGE('',*,*,#5965,.T.);
++#7045=ORIENTED_EDGE('',*,*,#6244,.T.);
++#7046=EDGE_LOOP('',(#7042,#7043,#7044,#7045));
++#7047=FACE_OUTER_BOUND('',#7046,.F.);
++#7048=ADVANCED_FACE('',(#7047),#7041,.F.);
++#7049=CARTESIAN_POINT('',(2.E1,0.E0,0.E0));
++#7050=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#7051=DIRECTION('',(0.E0,1.E0,0.E0));
++#7052=AXIS2_PLACEMENT_3D('',#7049,#7050,#7051);
++#7053=PLANE('',#7052);
++#7055=ORIENTED_EDGE('',*,*,#7054,.F.);
++#7056=ORIENTED_EDGE('',*,*,#5500,.T.);
++#7057=ORIENTED_EDGE('',*,*,#6993,.T.);
++#7058=ORIENTED_EDGE('',*,*,#6240,.F.);
++#7059=EDGE_LOOP('',(#7055,#7056,#7057,#7058));
++#7060=FACE_OUTER_BOUND('',#7059,.F.);
++#7061=ADVANCED_FACE('',(#7060),#7053,.T.);
++#7062=CARTESIAN_POINT('',(2.4E1,0.E0,0.E0));
++#7063=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7064=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7065=AXIS2_PLACEMENT_3D('',#7062,#7063,#7064);
++#7066=PLANE('',#7065);
++#7067=ORIENTED_EDGE('',*,*,#5502,.F.);
++#7068=ORIENTED_EDGE('',*,*,#7054,.T.);
++#7069=ORIENTED_EDGE('',*,*,#6238,.T.);
++#7071=ORIENTED_EDGE('',*,*,#7070,.F.);
++#7072=EDGE_LOOP('',(#7067,#7068,#7069,#7071));
++#7073=FACE_OUTER_BOUND('',#7072,.F.);
++#7074=ADVANCED_FACE('',(#7073),#7066,.T.);
++#7075=CARTESIAN_POINT('',(0.E0,0.E0,4.E0));
++#7076=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#7077=DIRECTION('',(0.E0,1.E0,0.E0));
++#7078=AXIS2_PLACEMENT_3D('',#7075,#7076,#7077);
++#7079=PLANE('',#7078);
++#7080=ORIENTED_EDGE('',*,*,#6691,.F.);
++#7081=ORIENTED_EDGE('',*,*,#5504,.T.);
++#7082=ORIENTED_EDGE('',*,*,#7070,.T.);
++#7083=ORIENTED_EDGE('',*,*,#6236,.F.);
++#7084=EDGE_LOOP('',(#7080,#7081,#7082,#7083));
++#7085=FACE_OUTER_BOUND('',#7084,.F.);
++#7086=ADVANCED_FACE('',(#7085),#7079,.T.);
++#7087=CARTESIAN_POINT('',(2.55E1,1.5E0,1.225E1));
++#7088=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#7089=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7090=AXIS2_PLACEMENT_3D('',#7087,#7088,#7089);
++#7091=PLANE('',#7090);
++#7092=ORIENTED_EDGE('',*,*,#6940,.F.);
++#7093=ORIENTED_EDGE('',*,*,#6288,.T.);
++#7095=ORIENTED_EDGE('',*,*,#7094,.T.);
++#7096=ORIENTED_EDGE('',*,*,#5534,.F.);
++#7097=EDGE_LOOP('',(#7092,#7093,#7095,#7096));
++#7098=FACE_OUTER_BOUND('',#7097,.F.);
++#7099=ADVANCED_FACE('',(#7098),#7091,.T.);
++#7100=CARTESIAN_POINT('',(2.6E1,2.5E0,8.E0));
++#7101=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7102=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7103=AXIS2_PLACEMENT_3D('',#7100,#7101,#7102);
++#7104=PLANE('',#7103);
++#7105=ORIENTED_EDGE('',*,*,#5968,.T.);
++#7106=ORIENTED_EDGE('',*,*,#5536,.T.);
++#7107=ORIENTED_EDGE('',*,*,#7094,.F.);
++#7108=ORIENTED_EDGE('',*,*,#6286,.F.);
++#7109=ORIENTED_EDGE('',*,*,#6165,.F.);
++#7111=ORIENTED_EDGE('',*,*,#7110,.F.);
++#7112=EDGE_LOOP('',(#7105,#7106,#7107,#7108,#7109,#7111));
++#7113=FACE_OUTER_BOUND('',#7112,.F.);
++#7114=ADVANCED_FACE('',(#7113),#7104,.F.);
++#7115=CARTESIAN_POINT('',(2.1E1,1.15E1,8.E0));
++#7116=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));
++#7117=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#7118=AXIS2_PLACEMENT_3D('',#7115,#7116,#7117);
++#7119=PLANE('',#7118);
++#7120=ORIENTED_EDGE('',*,*,#5970,.T.);
++#7121=ORIENTED_EDGE('',*,*,#7110,.T.);
++#7122=ORIENTED_EDGE('',*,*,#6163,.F.);
++#7124=ORIENTED_EDGE('',*,*,#7123,.F.);
++#7125=EDGE_LOOP('',(#7120,#7121,#7122,#7124));
++#7126=FACE_OUTER_BOUND('',#7125,.F.);
++#7127=ADVANCED_FACE('',(#7126),#7119,.F.);
++#7128=CARTESIAN_POINT('',(1.9E1,1.15E1,8.E0));
++#7129=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7130=DIRECTION('',(1.E0,0.E0,0.E0));
++#7131=AXIS2_PLACEMENT_3D('',#7128,#7129,#7130);
++#7132=PLANE('',#7131);
++#7133=ORIENTED_EDGE('',*,*,#5972,.F.);
++#7134=ORIENTED_EDGE('',*,*,#7123,.T.);
++#7135=ORIENTED_EDGE('',*,*,#6161,.F.);
++#7137=ORIENTED_EDGE('',*,*,#7136,.F.);
++#7138=EDGE_LOOP('',(#7133,#7134,#7135,#7137));
++#7139=FACE_OUTER_BOUND('',#7138,.F.);
++#7141=ORIENTED_EDGE('',*,*,#7140,.T.);
++#7143=ORIENTED_EDGE('',*,*,#7142,.T.);
++#7144=EDGE_LOOP('',(#7141,#7143));
++#7145=FACE_BOUND('',#7144,.F.);
++#7147=ORIENTED_EDGE('',*,*,#7146,.T.);
++#7149=ORIENTED_EDGE('',*,*,#7148,.T.);
++#7150=EDGE_LOOP('',(#7147,#7149));
++#7151=FACE_BOUND('',#7150,.F.);
++#7152=ADVANCED_FACE('',(#7139,#7145,#7151),#7132,.F.);
++#7153=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));
++#7154=DIRECTION('',(1.E0,0.E0,0.E0));
++#7155=DIRECTION('',(0.E0,1.E0,0.E0));
++#7156=AXIS2_PLACEMENT_3D('',#7153,#7154,#7155);
++#7157=PLANE('',#7156);
++#7159=ORIENTED_EDGE('',*,*,#7158,.T.);
++#7160=ORIENTED_EDGE('',*,*,#6430,.F.);
++#7162=ORIENTED_EDGE('',*,*,#7161,.T.);
++#7163=ORIENTED_EDGE('',*,*,#5680,.T.);
++#7164=EDGE_LOOP('',(#7159,#7160,#7162,#7163));
++#7165=FACE_OUTER_BOUND('',#7164,.F.);
++#7166=ADVANCED_FACE('',(#7165),#7157,.F.);
++#7167=CARTESIAN_POINT('',(1.9E1,1.5E0,8.E0));
++#7168=DIRECTION('',(1.E0,0.E0,0.E0));
++#7169=DIRECTION('',(0.E0,1.E0,0.E0));
++#7170=AXIS2_PLACEMENT_3D('',#7167,#7168,#7169);
++#7171=PLANE('',#7170);
++#7172=ORIENTED_EDGE('',*,*,#6325,.F.);
++#7173=ORIENTED_EDGE('',*,*,#5974,.T.);
++#7174=ORIENTED_EDGE('',*,*,#7136,.T.);
++#7175=ORIENTED_EDGE('',*,*,#6159,.F.);
++#7176=EDGE_LOOP('',(#7172,#7173,#7174,#7175));
++#7177=FACE_OUTER_BOUND('',#7176,.F.);
++#7178=ADVANCED_FACE('',(#7177),#7171,.F.);
++#7179=CARTESIAN_POINT('',(1.8E1,-7.099592191979E-2,1.1E1));
++#7180=DIRECTION('',(0.E0,1.E0,0.E0));
++#7181=DIRECTION('',(1.E0,0.E0,0.E0));
++#7182=AXIS2_PLACEMENT_3D('',#7179,#7180,#7181);
++#7183=CYLINDRICAL_SURFACE('',#7182,1.E0);
++#7184=ORIENTED_EDGE('',*,*,#7158,.F.);
++#7185=ORIENTED_EDGE('',*,*,#5678,.T.);
++#7187=ORIENTED_EDGE('',*,*,#7186,.T.);
++#7188=ORIENTED_EDGE('',*,*,#6432,.T.);
++#7189=EDGE_LOOP('',(#7184,#7185,#7187,#7188));
++#7190=FACE_OUTER_BOUND('',#7189,.F.);
++#7191=ADVANCED_FACE('',(#7190),#7183,.F.);
++#7192=CARTESIAN_POINT('',(5.E0,1.5E0,1.E1));
++#7193=DIRECTION('',(0.E0,0.E0,1.E0));
++#7194=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7195=AXIS2_PLACEMENT_3D('',#7192,#7193,#7194);
++#7196=PLANE('',#7195);
++#7198=ORIENTED_EDGE('',*,*,#7197,.F.);
++#7199=ORIENTED_EDGE('',*,*,#6434,.T.);
++#7200=ORIENTED_EDGE('',*,*,#7186,.F.);
++#7201=ORIENTED_EDGE('',*,*,#5676,.F.);
++#7202=EDGE_LOOP('',(#7198,#7199,#7200,#7201));
++#7203=FACE_OUTER_BOUND('',#7202,.F.);
++#7204=ADVANCED_FACE('',(#7203),#7196,.T.);
++#7205=CARTESIAN_POINT('',(6.E0,1.567729432957E0,1.1E1));
++#7206=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7207=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7208=AXIS2_PLACEMENT_3D('',#7205,#7206,#7207);
++#7209=CYLINDRICAL_SURFACE('',#7208,1.E0);
++#7211=ORIENTED_EDGE('',*,*,#7210,.F.);
++#7212=ORIENTED_EDGE('',*,*,#6436,.T.);
++#7213=ORIENTED_EDGE('',*,*,#7197,.T.);
++#7214=ORIENTED_EDGE('',*,*,#5674,.T.);
++#7215=EDGE_LOOP('',(#7211,#7212,#7213,#7214));
++#7216=FACE_OUTER_BOUND('',#7215,.F.);
++#7217=ADVANCED_FACE('',(#7216),#7209,.F.);
++#7218=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));
++#7219=DIRECTION('',(1.E0,0.E0,0.E0));
++#7220=DIRECTION('',(0.E0,1.E0,0.E0));
++#7221=AXIS2_PLACEMENT_3D('',#7218,#7219,#7220);
++#7222=PLANE('',#7221);
++#7223=ORIENTED_EDGE('',*,*,#7210,.T.);
++#7224=ORIENTED_EDGE('',*,*,#5672,.F.);
++#7226=ORIENTED_EDGE('',*,*,#7225,.T.);
++#7227=ORIENTED_EDGE('',*,*,#6438,.T.);
++#7228=EDGE_LOOP('',(#7223,#7224,#7226,#7227));
++#7229=FACE_OUTER_BOUND('',#7228,.F.);
++#7230=ADVANCED_FACE('',(#7229),#7222,.T.);
++#7231=CARTESIAN_POINT('',(5.E0,1.5E0,8.E0));
++#7232=DIRECTION('',(1.E0,0.E0,0.E0));
++#7233=DIRECTION('',(0.E0,1.E0,0.E0));
++#7234=AXIS2_PLACEMENT_3D('',#7231,#7232,#7233);
++#7235=PLANE('',#7234);
++#7236=ORIENTED_EDGE('',*,*,#6322,.T.);
++#7238=ORIENTED_EDGE('',*,*,#7237,.T.);
++#7240=ORIENTED_EDGE('',*,*,#7239,.F.);
++#7241=ORIENTED_EDGE('',*,*,#5978,.T.);
++#7242=EDGE_LOOP('',(#7236,#7238,#7240,#7241));
++#7243=FACE_OUTER_BOUND('',#7242,.F.);
++#7244=ADVANCED_FACE('',(#7243),#7235,.T.);
++#7245=CARTESIAN_POINT('',(5.E0,0.E0,1.175E1));
++#7246=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#7247=DIRECTION('',(0.E0,1.E0,0.E0));
++#7248=AXIS2_PLACEMENT_3D('',#7245,#7246,#7247);
++#7249=PLANE('',#7248);
++#7250=ORIENTED_EDGE('',*,*,#7225,.F.);
++#7251=ORIENTED_EDGE('',*,*,#5670,.T.);
++#7252=ORIENTED_EDGE('',*,*,#6718,.T.);
++#7253=ORIENTED_EDGE('',*,*,#6440,.F.);
++#7254=EDGE_LOOP('',(#7250,#7251,#7252,#7253));
++#7255=FACE_OUTER_BOUND('',#7254,.F.);
++#7256=ADVANCED_FACE('',(#7255),#7249,.T.);
++#7257=CARTESIAN_POINT('',(0.E0,0.E0,1.E1));
++#7258=DIRECTION('',(0.E0,0.E0,1.E0));
++#7259=DIRECTION('',(1.E0,0.E0,0.E0));
++#7260=AXIS2_PLACEMENT_3D('',#7257,#7258,#7259);
++#7261=PLANE('',#7260);
++#7263=ORIENTED_EDGE('',*,*,#7262,.F.);
++#7264=ORIENTED_EDGE('',*,*,#6312,.F.);
++#7266=ORIENTED_EDGE('',*,*,#7265,.F.);
++#7268=ORIENTED_EDGE('',*,*,#7267,.F.);
++#7270=ORIENTED_EDGE('',*,*,#7269,.F.);
++#7271=ORIENTED_EDGE('',*,*,#7237,.F.);
++#7272=ORIENTED_EDGE('',*,*,#6320,.F.);
++#7274=ORIENTED_EDGE('',*,*,#7273,.T.);
++#7276=ORIENTED_EDGE('',*,*,#7275,.F.);
++#7277=EDGE_LOOP('',(#7263,#7264,#7266,#7268,#7270,#7271,#7272,#7274,#7276));
++#7278=FACE_OUTER_BOUND('',#7277,.F.);
++#7280=ORIENTED_EDGE('',*,*,#7279,.T.);
++#7282=ORIENTED_EDGE('',*,*,#7281,.T.);
++#7283=EDGE_LOOP('',(#7280,#7282));
++#7284=FACE_BOUND('',#7283,.F.);
++#7286=ORIENTED_EDGE('',*,*,#7285,.F.);
++#7288=ORIENTED_EDGE('',*,*,#7287,.T.);
++#7290=ORIENTED_EDGE('',*,*,#7289,.F.);
++#7292=ORIENTED_EDGE('',*,*,#7291,.T.);
++#7294=ORIENTED_EDGE('',*,*,#7293,.F.);
++#7296=ORIENTED_EDGE('',*,*,#7295,.T.);
++#7298=ORIENTED_EDGE('',*,*,#7297,.F.);
++#7300=ORIENTED_EDGE('',*,*,#7299,.T.);
++#7302=ORIENTED_EDGE('',*,*,#7301,.F.);
++#7304=ORIENTED_EDGE('',*,*,#7303,.T.);
++#7306=ORIENTED_EDGE('',*,*,#7305,.F.);
++#7308=ORIENTED_EDGE('',*,*,#7307,.T.);
++#7309=EDGE_LOOP('',(#7286,#7288,#7290,#7292,#7294,#7296,#7298,#7300,#7302,#7304,
++#7306,#7308));
++#7310=FACE_BOUND('',#7309,.F.);
++#7311=ADVANCED_FACE('',(#7278,#7284,#7310),#7261,.T.);
++#7312=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));
++#7313=DIRECTION('',(0.E0,0.E0,1.E0));
++#7314=DIRECTION('',(1.E0,0.E0,0.E0));
++#7315=AXIS2_PLACEMENT_3D('',#7312,#7313,#7314);
++#7316=CYLINDRICAL_SURFACE('',#7315,1.625E-1);
++#7317=ORIENTED_EDGE('',*,*,#6031,.T.);
++#7319=ORIENTED_EDGE('',*,*,#7318,.T.);
++#7320=ORIENTED_EDGE('',*,*,#7279,.F.);
++#7322=ORIENTED_EDGE('',*,*,#7321,.F.);
++#7323=EDGE_LOOP('',(#7317,#7319,#7320,#7322));
++#7324=FACE_OUTER_BOUND('',#7323,.F.);
++#7325=ADVANCED_FACE('',(#7324),#7316,.F.);
++#7326=CARTESIAN_POINT('',(4.25E0,1.05E1,8.E0));
++#7327=DIRECTION('',(0.E0,0.E0,1.E0));
++#7328=DIRECTION('',(1.E0,0.E0,0.E0));
++#7329=AXIS2_PLACEMENT_3D('',#7326,#7327,#7328);
++#7330=CYLINDRICAL_SURFACE('',#7329,1.625E-1);
++#7331=ORIENTED_EDGE('',*,*,#6033,.T.);
++#7332=ORIENTED_EDGE('',*,*,#7321,.T.);
++#7333=ORIENTED_EDGE('',*,*,#7281,.F.);
++#7334=ORIENTED_EDGE('',*,*,#7318,.F.);
++#7335=EDGE_LOOP('',(#7331,#7332,#7333,#7334));
++#7336=FACE_OUTER_BOUND('',#7335,.F.);
++#7337=ADVANCED_FACE('',(#7336),#7330,.F.);
++#7338=CARTESIAN_POINT('',(2.5E-1,1.5E0,1.2E1));
++#7339=DIRECTION('',(1.E0,0.E0,0.E0));
++#7340=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7341=AXIS2_PLACEMENT_3D('',#7338,#7339,#7340);
++#7342=PLANE('',#7341);
++#7343=ORIENTED_EDGE('',*,*,#6314,.T.);
++#7344=ORIENTED_EDGE('',*,*,#7262,.T.);
++#7346=ORIENTED_EDGE('',*,*,#7345,.T.);
++#7347=EDGE_LOOP('',(#7343,#7344,#7346));
++#7348=FACE_OUTER_BOUND('',#7347,.F.);
++#7349=ADVANCED_FACE('',(#7348),#7342,.F.);
++#7350=CARTESIAN_POINT('',(2.5E-1,6.5E0,1.E1));
++#7351=DIRECTION('',(0.E0,5.E-1,8.660254037844E-1));
++#7352=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#7353=AXIS2_PLACEMENT_3D('',#7350,#7351,#7352);
++#7354=PLANE('',#7353);
++#7355=ORIENTED_EDGE('',*,*,#6316,.F.);
++#7356=ORIENTED_EDGE('',*,*,#7345,.F.);
++#7357=ORIENTED_EDGE('',*,*,#7275,.T.);
++#7359=ORIENTED_EDGE('',*,*,#7358,.T.);
++#7360=EDGE_LOOP('',(#7355,#7356,#7357,#7359));
++#7361=FACE_OUTER_BOUND('',#7360,.F.);
++#7363=ORIENTED_EDGE('',*,*,#7362,.T.);
++#7365=ORIENTED_EDGE('',*,*,#7364,.T.);
++#7366=EDGE_LOOP('',(#7363,#7365));
++#7367=FACE_BOUND('',#7366,.F.);
++#7368=ADVANCED_FACE('',(#7361,#7367),#7354,.T.);
++#7369=CARTESIAN_POINT('',(2.E0,1.5E0,1.2E1));
++#7370=DIRECTION('',(1.E0,0.E0,0.E0));
++#7371=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7372=AXIS2_PLACEMENT_3D('',#7369,#7370,#7371);
++#7373=PLANE('',#7372);
++#7374=ORIENTED_EDGE('',*,*,#6318,.F.);
++#7375=ORIENTED_EDGE('',*,*,#7358,.F.);
++#7376=ORIENTED_EDGE('',*,*,#7273,.F.);
++#7377=EDGE_LOOP('',(#7374,#7375,#7376));
++#7378=FACE_OUTER_BOUND('',#7377,.F.);
++#7379=ADVANCED_FACE('',(#7378),#7373,.T.);
++#7380=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));
++#7381=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7382=DIRECTION('',(1.E0,0.E0,0.E0));
++#7383=AXIS2_PLACEMENT_3D('',#7380,#7381,#7382);
++#7384=CYLINDRICAL_SURFACE('',#7383,2.575E-1);
++#7386=ORIENTED_EDGE('',*,*,#7385,.F.);
++#7387=ORIENTED_EDGE('',*,*,#7362,.F.);
++#7389=ORIENTED_EDGE('',*,*,#7388,.F.);
++#7391=ORIENTED_EDGE('',*,*,#7390,.F.);
++#7392=EDGE_LOOP('',(#7386,#7387,#7389,#7391));
++#7393=FACE_OUTER_BOUND('',#7392,.F.);
++#7394=ADVANCED_FACE('',(#7393),#7384,.F.);
++#7395=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));
++#7396=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7397=DIRECTION('',(1.E0,0.E0,0.E0));
++#7398=AXIS2_PLACEMENT_3D('',#7395,#7396,#7397);
++#7399=CYLINDRICAL_SURFACE('',#7398,2.575E-1);
++#7400=ORIENTED_EDGE('',*,*,#7388,.T.);
++#7401=ORIENTED_EDGE('',*,*,#7364,.F.);
++#7402=ORIENTED_EDGE('',*,*,#7385,.T.);
++#7404=ORIENTED_EDGE('',*,*,#7403,.F.);
++#7405=EDGE_LOOP('',(#7400,#7401,#7402,#7404));
++#7406=FACE_OUTER_BOUND('',#7405,.F.);
++#7407=ADVANCED_FACE('',(#7406),#7399,.F.);
++#7408=CARTESIAN_POINT('',(1.125E0,1.E0,1.2E1));
++#7409=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7410=DIRECTION('',(1.E0,0.E0,0.E0));
++#7411=AXIS2_PLACEMENT_3D('',#7408,#7409,#7410);
++#7412=PLANE('',#7411);
++#7413=ORIENTED_EDGE('',*,*,#7390,.T.);
++#7414=ORIENTED_EDGE('',*,*,#7403,.T.);
++#7415=EDGE_LOOP('',(#7413,#7414));
++#7416=FACE_OUTER_BOUND('',#7415,.F.);
++#7418=ORIENTED_EDGE('',*,*,#7417,.F.);
++#7420=ORIENTED_EDGE('',*,*,#7419,.F.);
++#7421=EDGE_LOOP('',(#7418,#7420));
++#7422=FACE_BOUND('',#7421,.F.);
++#7423=ADVANCED_FACE('',(#7416,#7422),#7412,.F.);
++#7424=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));
++#7425=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7426=DIRECTION('',(1.E0,0.E0,0.E0));
++#7427=AXIS2_PLACEMENT_3D('',#7424,#7425,#7426);
++#7428=CYLINDRICAL_SURFACE('',#7427,1.925E-1);
++#7429=ORIENTED_EDGE('',*,*,#7417,.T.);
++#7431=ORIENTED_EDGE('',*,*,#7430,.T.);
++#7432=ORIENTED_EDGE('',*,*,#5620,.F.);
++#7434=ORIENTED_EDGE('',*,*,#7433,.F.);
++#7435=EDGE_LOOP('',(#7429,#7431,#7432,#7434));
++#7436=FACE_OUTER_BOUND('',#7435,.F.);
++#7437=ADVANCED_FACE('',(#7436),#7428,.F.);
++#7438=CARTESIAN_POINT('',(1.125E0,1.5E0,1.2E1));
++#7439=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7440=DIRECTION('',(1.E0,0.E0,0.E0));
++#7441=AXIS2_PLACEMENT_3D('',#7438,#7439,#7440);
++#7442=CYLINDRICAL_SURFACE('',#7441,1.925E-1);
++#7443=ORIENTED_EDGE('',*,*,#7419,.T.);
++#7444=ORIENTED_EDGE('',*,*,#7433,.T.);
++#7445=ORIENTED_EDGE('',*,*,#5622,.F.);
++#7446=ORIENTED_EDGE('',*,*,#7430,.F.);
++#7447=EDGE_LOOP('',(#7443,#7444,#7445,#7446));
++#7448=FACE_OUTER_BOUND('',#7447,.F.);
++#7449=ADVANCED_FACE('',(#7448),#7442,.F.);
++#7450=CARTESIAN_POINT('',(-2.E0,2.5E0,8.E0));
++#7451=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7452=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7453=AXIS2_PLACEMENT_3D('',#7450,#7451,#7452);
++#7454=PLANE('',#7453);
++#7455=ORIENTED_EDGE('',*,*,#7265,.T.);
++#7456=ORIENTED_EDGE('',*,*,#6310,.T.);
++#7458=ORIENTED_EDGE('',*,*,#7457,.F.);
++#7459=ORIENTED_EDGE('',*,*,#5512,.F.);
++#7460=ORIENTED_EDGE('',*,*,#5984,.T.);
++#7462=ORIENTED_EDGE('',*,*,#7461,.T.);
++#7463=EDGE_LOOP('',(#7455,#7456,#7458,#7459,#7460,#7462));
++#7464=FACE_OUTER_BOUND('',#7463,.F.);
++#7465=ADVANCED_FACE('',(#7464),#7454,.T.);
++#7466=CARTESIAN_POINT('',(-1.5E0,0.E0,1.225E1));
++#7467=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#7468=DIRECTION('',(0.E0,1.E0,0.E0));
++#7469=AXIS2_PLACEMENT_3D('',#7466,#7467,#7468);
++#7470=PLANE('',#7469);
++#7471=ORIENTED_EDGE('',*,*,#6731,.F.);
++#7472=ORIENTED_EDGE('',*,*,#5514,.T.);
++#7473=ORIENTED_EDGE('',*,*,#7457,.T.);
++#7474=ORIENTED_EDGE('',*,*,#6308,.F.);
++#7475=EDGE_LOOP('',(#7471,#7472,#7473,#7474));
++#7476=FACE_OUTER_BOUND('',#7475,.F.);
++#7477=ADVANCED_FACE('',(#7476),#7470,.T.);
++#7478=CARTESIAN_POINT('',(3.E0,1.15E1,8.E0));
++#7479=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#7480=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#7481=AXIS2_PLACEMENT_3D('',#7478,#7479,#7480);
++#7482=PLANE('',#7481);
++#7483=ORIENTED_EDGE('',*,*,#5982,.F.);
++#7485=ORIENTED_EDGE('',*,*,#7484,.T.);
++#7486=ORIENTED_EDGE('',*,*,#7267,.T.);
++#7487=ORIENTED_EDGE('',*,*,#7461,.F.);
++#7488=EDGE_LOOP('',(#7483,#7485,#7486,#7487));
++#7489=FACE_OUTER_BOUND('',#7488,.F.);
++#7490=ADVANCED_FACE('',(#7489),#7482,.T.);
++#7491=CARTESIAN_POINT('',(5.E0,1.15E1,8.E0));
++#7492=DIRECTION('',(0.E0,1.E0,0.E0));
++#7493=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7494=AXIS2_PLACEMENT_3D('',#7491,#7492,#7493);
++#7495=PLANE('',#7494);
++#7496=ORIENTED_EDGE('',*,*,#5980,.F.);
++#7497=ORIENTED_EDGE('',*,*,#7239,.T.);
++#7498=ORIENTED_EDGE('',*,*,#7269,.T.);
++#7499=ORIENTED_EDGE('',*,*,#7484,.F.);
++#7500=EDGE_LOOP('',(#7496,#7497,#7498,#7499));
++#7501=FACE_OUTER_BOUND('',#7500,.F.);
++#7503=ORIENTED_EDGE('',*,*,#7502,.F.);
++#7505=ORIENTED_EDGE('',*,*,#7504,.F.);
++#7506=EDGE_LOOP('',(#7503,#7505));
++#7507=FACE_BOUND('',#7506,.F.);
++#7509=ORIENTED_EDGE('',*,*,#7508,.F.);
++#7511=ORIENTED_EDGE('',*,*,#7510,.F.);
++#7512=EDGE_LOOP('',(#7509,#7511));
++#7513=FACE_BOUND('',#7512,.F.);
++#7514=ADVANCED_FACE('',(#7501,#7507,#7513),#7495,.T.);
++#7515=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));
++#7516=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7517=DIRECTION('',(1.E0,0.E0,0.E0));
++#7518=AXIS2_PLACEMENT_3D('',#7515,#7516,#7517);
++#7519=CYLINDRICAL_SURFACE('',#7518,9.5E-2);
++#7520=ORIENTED_EDGE('',*,*,#7502,.T.);
++#7522=ORIENTED_EDGE('',*,*,#7521,.T.);
++#7524=ORIENTED_EDGE('',*,*,#7523,.F.);
++#7526=ORIENTED_EDGE('',*,*,#7525,.F.);
++#7527=EDGE_LOOP('',(#7520,#7522,#7524,#7526));
++#7528=FACE_OUTER_BOUND('',#7527,.F.);
++#7529=ADVANCED_FACE('',(#7528),#7519,.F.);
++#7530=CARTESIAN_POINT('',(4.E0,1.15E1,9.E0));
++#7531=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7532=DIRECTION('',(1.E0,0.E0,0.E0));
++#7533=AXIS2_PLACEMENT_3D('',#7530,#7531,#7532);
++#7534=CYLINDRICAL_SURFACE('',#7533,9.5E-2);
++#7535=ORIENTED_EDGE('',*,*,#7504,.T.);
++#7536=ORIENTED_EDGE('',*,*,#7525,.T.);
++#7538=ORIENTED_EDGE('',*,*,#7537,.F.);
++#7539=ORIENTED_EDGE('',*,*,#7521,.F.);
++#7540=EDGE_LOOP('',(#7535,#7536,#7538,#7539));
++#7541=FACE_OUTER_BOUND('',#7540,.F.);
++#7542=ADVANCED_FACE('',(#7541),#7534,.F.);
++#7543=CARTESIAN_POINT('',(4.E0,1.1125E1,9.E0));
++#7544=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7545=DIRECTION('',(1.E0,0.E0,0.E0));
++#7546=AXIS2_PLACEMENT_3D('',#7543,#7544,#7545);
++#7547=PLANE('',#7546);
++#7548=ORIENTED_EDGE('',*,*,#7523,.T.);
++#7549=ORIENTED_EDGE('',*,*,#7537,.T.);
++#7550=EDGE_LOOP('',(#7548,#7549));
++#7551=FACE_OUTER_BOUND('',#7550,.F.);
++#7552=ADVANCED_FACE('',(#7551),#7547,.F.);
++#7553=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));
++#7554=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7555=DIRECTION('',(1.E0,0.E0,0.E0));
++#7556=AXIS2_PLACEMENT_3D('',#7553,#7554,#7555);
++#7557=CYLINDRICAL_SURFACE('',#7556,6.25E-2);
++#7558=ORIENTED_EDGE('',*,*,#7508,.T.);
++#7560=ORIENTED_EDGE('',*,*,#7559,.T.);
++#7562=ORIENTED_EDGE('',*,*,#7561,.F.);
++#7564=ORIENTED_EDGE('',*,*,#7563,.F.);
++#7565=EDGE_LOOP('',(#7558,#7560,#7562,#7564));
++#7566=FACE_OUTER_BOUND('',#7565,.F.);
++#7567=ADVANCED_FACE('',(#7566),#7557,.F.);
++#7568=CARTESIAN_POINT('',(3.867417478528E0,1.15E1,9.132582521472E0));
++#7569=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7570=DIRECTION('',(1.E0,0.E0,0.E0));
++#7571=AXIS2_PLACEMENT_3D('',#7568,#7569,#7570);
++#7572=CYLINDRICAL_SURFACE('',#7571,6.25E-2);
++#7573=ORIENTED_EDGE('',*,*,#7510,.T.);
++#7574=ORIENTED_EDGE('',*,*,#7563,.T.);
++#7576=ORIENTED_EDGE('',*,*,#7575,.F.);
++#7577=ORIENTED_EDGE('',*,*,#7559,.F.);
++#7578=EDGE_LOOP('',(#7573,#7574,#7576,#7577));
++#7579=FACE_OUTER_BOUND('',#7578,.F.);
++#7580=ADVANCED_FACE('',(#7579),#7572,.F.);
++#7581=CARTESIAN_POINT('',(3.867417478528E0,1.125E1,9.132582521472E0));
++#7582=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7583=DIRECTION('',(1.E0,0.E0,0.E0));
++#7584=AXIS2_PLACEMENT_3D('',#7581,#7582,#7583);
++#7585=PLANE('',#7584);
++#7586=ORIENTED_EDGE('',*,*,#7561,.T.);
++#7587=ORIENTED_EDGE('',*,*,#7575,.T.);
++#7588=EDGE_LOOP('',(#7586,#7587));
++#7589=FACE_OUTER_BOUND('',#7588,.F.);
++#7590=ADVANCED_FACE('',(#7589),#7585,.F.);
++#7591=CARTESIAN_POINT('',(2.15E0,6.65E0,9.441108058217E0));
++#7592=DIRECTION('',(0.E0,0.E0,1.E0));
++#7593=DIRECTION('',(1.E0,0.E0,0.E0));
++#7594=AXIS2_PLACEMENT_3D('',#7591,#7592,#7593);
++#7595=CYLINDRICAL_SURFACE('',#7594,3.5E-1);
++#7597=ORIENTED_EDGE('',*,*,#7596,.T.);
++#7598=ORIENTED_EDGE('',*,*,#7285,.T.);
++#7600=ORIENTED_EDGE('',*,*,#7599,.F.);
++#7602=ORIENTED_EDGE('',*,*,#7601,.T.);
++#7603=EDGE_LOOP('',(#7597,#7598,#7600,#7602));
++#7604=FACE_OUTER_BOUND('',#7603,.F.);
++#7605=ADVANCED_FACE('',(#7604),#7595,.T.);
++#7606=CARTESIAN_POINT('',(2.5E0,7.E0,1.E1));
++#7607=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7608=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7609=AXIS2_PLACEMENT_3D('',#7606,#7607,#7608);
++#7610=PLANE('',#7609);
++#7611=ORIENTED_EDGE('',*,*,#7596,.F.);
++#7613=ORIENTED_EDGE('',*,*,#7612,.T.);
++#7615=ORIENTED_EDGE('',*,*,#7614,.F.);
++#7616=ORIENTED_EDGE('',*,*,#7287,.F.);
++#7617=EDGE_LOOP('',(#7611,#7613,#7615,#7616));
++#7618=FACE_OUTER_BOUND('',#7617,.F.);
++#7619=ADVANCED_FACE('',(#7618),#7610,.F.);
++#7620=CARTESIAN_POINT('',(0.E0,0.E0,9.5E0));
++#7621=DIRECTION('',(0.E0,0.E0,1.E0));
++#7622=DIRECTION('',(1.E0,0.E0,0.E0));
++#7623=AXIS2_PLACEMENT_3D('',#7620,#7621,#7622);
++#7624=PLANE('',#7623);
++#7625=ORIENTED_EDGE('',*,*,#7612,.F.);
++#7626=ORIENTED_EDGE('',*,*,#7601,.F.);
++#7628=ORIENTED_EDGE('',*,*,#7627,.F.);
++#7630=ORIENTED_EDGE('',*,*,#7629,.F.);
++#7632=ORIENTED_EDGE('',*,*,#7631,.F.);
++#7634=ORIENTED_EDGE('',*,*,#7633,.F.);
++#7636=ORIENTED_EDGE('',*,*,#7635,.F.);
++#7638=ORIENTED_EDGE('',*,*,#7637,.F.);
++#7640=ORIENTED_EDGE('',*,*,#7639,.F.);
++#7642=ORIENTED_EDGE('',*,*,#7641,.F.);
++#7644=ORIENTED_EDGE('',*,*,#7643,.F.);
++#7646=ORIENTED_EDGE('',*,*,#7645,.F.);
++#7647=EDGE_LOOP('',(#7625,#7626,#7628,#7630,#7632,#7634,#7636,#7638,#7640,#7642,
++#7644,#7646));
++#7648=FACE_OUTER_BOUND('',#7647,.F.);
++#7649=ADVANCED_FACE('',(#7648),#7624,.T.);
++#7650=CARTESIAN_POINT('',(1.357969178416E0,7.E0,1.E1));
++#7651=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7652=DIRECTION('',(1.E0,0.E0,0.E0));
++#7653=AXIS2_PLACEMENT_3D('',#7650,#7651,#7652);
++#7654=PLANE('',#7653);
++#7655=ORIENTED_EDGE('',*,*,#7599,.T.);
++#7656=ORIENTED_EDGE('',*,*,#7307,.F.);
++#7658=ORIENTED_EDGE('',*,*,#7657,.T.);
++#7659=ORIENTED_EDGE('',*,*,#7627,.T.);
++#7660=EDGE_LOOP('',(#7655,#7656,#7658,#7659));
++#7661=FACE_OUTER_BOUND('',#7660,.F.);
++#7662=ADVANCED_FACE('',(#7661),#7654,.F.);
++#7663=CARTESIAN_POINT('',(1.952799239454E0,7.35E0,1.006892397423E1));
++#7664=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7665=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7666=AXIS2_PLACEMENT_3D('',#7663,#7664,#7665);
++#7667=CYLINDRICAL_SURFACE('',#7666,3.5E-1);
++#7668=ORIENTED_EDGE('',*,*,#7657,.F.);
++#7669=ORIENTED_EDGE('',*,*,#7305,.T.);
++#7671=ORIENTED_EDGE('',*,*,#7670,.T.);
++#7672=ORIENTED_EDGE('',*,*,#7629,.T.);
++#7673=EDGE_LOOP('',(#7668,#7669,#7671,#7672));
++#7674=FACE_OUTER_BOUND('',#7673,.F.);
++#7675=ADVANCED_FACE('',(#7674),#7667,.F.);
++#7676=CARTESIAN_POINT('',(2.746858067304E0,9.5E0,1.E1));
++#7677=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#7678=DIRECTION('',(-4.856429311786E-1,-8.741572761215E-1,0.E0));
++#7679=AXIS2_PLACEMENT_3D('',#7676,#7677,#7678);
++#7680=PLANE('',#7679);
++#7681=ORIENTED_EDGE('',*,*,#7670,.F.);
++#7682=ORIENTED_EDGE('',*,*,#7303,.F.);
++#7684=ORIENTED_EDGE('',*,*,#7683,.T.);
++#7685=ORIENTED_EDGE('',*,*,#7631,.T.);
++#7686=EDGE_LOOP('',(#7681,#7682,#7684,#7685));
++#7687=FACE_OUTER_BOUND('',#7686,.F.);
++#7688=ADVANCED_FACE('',(#7687),#7680,.F.);
++#7689=CARTESIAN_POINT('',(2.952799239454E0,9.15E0,1.006892397423E1));
++#7690=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7691=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#7692=AXIS2_PLACEMENT_3D('',#7689,#7690,#7691);
++#7693=CYLINDRICAL_SURFACE('',#7692,3.5E-1);
++#7694=ORIENTED_EDGE('',*,*,#7683,.F.);
++#7695=ORIENTED_EDGE('',*,*,#7301,.T.);
++#7697=ORIENTED_EDGE('',*,*,#7696,.T.);
++#7698=ORIENTED_EDGE('',*,*,#7633,.T.);
++#7699=EDGE_LOOP('',(#7694,#7695,#7697,#7698));
++#7700=FACE_OUTER_BOUND('',#7699,.F.);
++#7701=ADVANCED_FACE('',(#7700),#7693,.F.);
++#7702=CARTESIAN_POINT('',(4.5E0,9.5E0,1.E1));
++#7703=DIRECTION('',(0.E0,1.E0,0.E0));
++#7704=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7705=AXIS2_PLACEMENT_3D('',#7702,#7703,#7704);
++#7706=PLANE('',#7705);
++#7707=ORIENTED_EDGE('',*,*,#7696,.F.);
++#7708=ORIENTED_EDGE('',*,*,#7299,.F.);
++#7710=ORIENTED_EDGE('',*,*,#7709,.T.);
++#7711=ORIENTED_EDGE('',*,*,#7635,.T.);
++#7712=EDGE_LOOP('',(#7707,#7708,#7710,#7711));
++#7713=FACE_OUTER_BOUND('',#7712,.F.);
++#7714=ADVANCED_FACE('',(#7713),#7706,.F.);
++#7715=CARTESIAN_POINT('',(4.15E0,9.15E0,1.006892397423E1));
++#7716=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7717=DIRECTION('',(0.E0,1.E0,0.E0));
++#7718=AXIS2_PLACEMENT_3D('',#7715,#7716,#7717);
++#7719=CYLINDRICAL_SURFACE('',#7718,3.5E-1);
++#7720=ORIENTED_EDGE('',*,*,#7709,.F.);
++#7721=ORIENTED_EDGE('',*,*,#7297,.T.);
++#7723=ORIENTED_EDGE('',*,*,#7722,.T.);
++#7724=ORIENTED_EDGE('',*,*,#7637,.T.);
++#7725=EDGE_LOOP('',(#7720,#7721,#7723,#7724));
++#7726=FACE_OUTER_BOUND('',#7725,.F.);
++#7727=ADVANCED_FACE('',(#7726),#7719,.F.);
++#7728=CARTESIAN_POINT('',(4.5E0,2.E0,1.E1));
++#7729=DIRECTION('',(1.E0,0.E0,0.E0));
++#7730=DIRECTION('',(0.E0,1.E0,0.E0));
++#7731=AXIS2_PLACEMENT_3D('',#7728,#7729,#7730);
++#7732=PLANE('',#7731);
++#7734=ORIENTED_EDGE('',*,*,#7733,.T.);
++#7735=ORIENTED_EDGE('',*,*,#7639,.T.);
++#7736=ORIENTED_EDGE('',*,*,#7722,.F.);
++#7737=ORIENTED_EDGE('',*,*,#7295,.F.);
++#7738=EDGE_LOOP('',(#7734,#7735,#7736,#7737));
++#7739=FACE_OUTER_BOUND('',#7738,.F.);
++#7740=ADVANCED_FACE('',(#7739),#7732,.F.);
++#7741=CARTESIAN_POINT('',(4.15E0,2.35E0,1.006892397423E1));
++#7742=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7743=DIRECTION('',(1.E0,0.E0,0.E0));
++#7744=AXIS2_PLACEMENT_3D('',#7741,#7742,#7743);
++#7745=CYLINDRICAL_SURFACE('',#7744,3.5E-1);
++#7746=ORIENTED_EDGE('',*,*,#7733,.F.);
++#7747=ORIENTED_EDGE('',*,*,#7293,.T.);
++#7749=ORIENTED_EDGE('',*,*,#7748,.T.);
++#7750=ORIENTED_EDGE('',*,*,#7641,.T.);
++#7751=EDGE_LOOP('',(#7746,#7747,#7749,#7750));
++#7752=FACE_OUTER_BOUND('',#7751,.F.);
++#7753=ADVANCED_FACE('',(#7752),#7745,.F.);
++#7754=CARTESIAN_POINT('',(2.5E0,2.E0,1.E1));
++#7755=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7756=DIRECTION('',(1.E0,0.E0,0.E0));
++#7757=AXIS2_PLACEMENT_3D('',#7754,#7755,#7756);
++#7758=PLANE('',#7757);
++#7760=ORIENTED_EDGE('',*,*,#7759,.T.);
++#7761=ORIENTED_EDGE('',*,*,#7643,.T.);
++#7762=ORIENTED_EDGE('',*,*,#7748,.F.);
++#7763=ORIENTED_EDGE('',*,*,#7291,.F.);
++#7764=EDGE_LOOP('',(#7760,#7761,#7762,#7763));
++#7765=FACE_OUTER_BOUND('',#7764,.F.);
++#7766=ADVANCED_FACE('',(#7765),#7758,.F.);
++#7767=CARTESIAN_POINT('',(2.85E0,2.35E0,1.006892397423E1));
++#7768=DIRECTION('',(0.E0,0.E0,-1.E0));
++#7769=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7770=AXIS2_PLACEMENT_3D('',#7767,#7768,#7769);
++#7771=CYLINDRICAL_SURFACE('',#7770,3.5E-1);
++#7772=ORIENTED_EDGE('',*,*,#7759,.F.);
++#7773=ORIENTED_EDGE('',*,*,#7289,.T.);
++#7774=ORIENTED_EDGE('',*,*,#7614,.T.);
++#7775=ORIENTED_EDGE('',*,*,#7645,.T.);
++#7776=EDGE_LOOP('',(#7772,#7773,#7774,#7775));
++#7777=FACE_OUTER_BOUND('',#7776,.F.);
++#7778=ADVANCED_FACE('',(#7777),#7771,.F.);
++#7779=CARTESIAN_POINT('',(1.9E1,1.5E0,1.175E1));
++#7780=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#7781=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7782=AXIS2_PLACEMENT_3D('',#7779,#7780,#7781);
++#7783=PLANE('',#7782);
++#7784=ORIENTED_EDGE('',*,*,#7161,.F.);
++#7785=ORIENTED_EDGE('',*,*,#6428,.T.);
++#7786=ORIENTED_EDGE('',*,*,#6953,.T.);
++#7787=ORIENTED_EDGE('',*,*,#5682,.F.);
++#7788=EDGE_LOOP('',(#7784,#7785,#7786,#7787));
++#7789=FACE_OUTER_BOUND('',#7788,.F.);
++#7790=ADVANCED_FACE('',(#7789),#7783,.T.);
++#7791=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));
++#7792=DIRECTION('',(0.E0,1.E0,0.E0));
++#7793=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7794=AXIS2_PLACEMENT_3D('',#7791,#7792,#7793);
++#7795=CYLINDRICAL_SURFACE('',#7794,9.5E-2);
++#7796=ORIENTED_EDGE('',*,*,#7140,.F.);
++#7798=ORIENTED_EDGE('',*,*,#7797,.T.);
++#7800=ORIENTED_EDGE('',*,*,#7799,.T.);
++#7802=ORIENTED_EDGE('',*,*,#7801,.F.);
++#7803=EDGE_LOOP('',(#7796,#7798,#7800,#7802));
++#7804=FACE_OUTER_BOUND('',#7803,.F.);
++#7805=ADVANCED_FACE('',(#7804),#7795,.F.);
++#7806=CARTESIAN_POINT('',(2.E1,1.15E1,9.E0));
++#7807=DIRECTION('',(0.E0,1.E0,0.E0));
++#7808=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7809=AXIS2_PLACEMENT_3D('',#7806,#7807,#7808);
++#7810=CYLINDRICAL_SURFACE('',#7809,9.5E-2);
++#7811=ORIENTED_EDGE('',*,*,#7142,.F.);
++#7812=ORIENTED_EDGE('',*,*,#7801,.T.);
++#7814=ORIENTED_EDGE('',*,*,#7813,.T.);
++#7815=ORIENTED_EDGE('',*,*,#7797,.F.);
++#7816=EDGE_LOOP('',(#7811,#7812,#7814,#7815));
++#7817=FACE_OUTER_BOUND('',#7816,.F.);
++#7818=ADVANCED_FACE('',(#7817),#7810,.F.);
++#7819=CARTESIAN_POINT('',(2.E1,1.1125E1,9.E0));
++#7820=DIRECTION('',(0.E0,1.E0,0.E0));
++#7821=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7822=AXIS2_PLACEMENT_3D('',#7819,#7820,#7821);
++#7823=PLANE('',#7822);
++#7824=ORIENTED_EDGE('',*,*,#7799,.F.);
++#7825=ORIENTED_EDGE('',*,*,#7813,.F.);
++#7826=EDGE_LOOP('',(#7824,#7825));
++#7827=FACE_OUTER_BOUND('',#7826,.F.);
++#7828=ADVANCED_FACE('',(#7827),#7823,.T.);
++#7829=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));
++#7830=DIRECTION('',(0.E0,1.E0,0.E0));
++#7831=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7832=AXIS2_PLACEMENT_3D('',#7829,#7830,#7831);
++#7833=CYLINDRICAL_SURFACE('',#7832,6.25E-2);
++#7834=ORIENTED_EDGE('',*,*,#7146,.F.);
++#7836=ORIENTED_EDGE('',*,*,#7835,.T.);
++#7838=ORIENTED_EDGE('',*,*,#7837,.T.);
++#7840=ORIENTED_EDGE('',*,*,#7839,.F.);
++#7841=EDGE_LOOP('',(#7834,#7836,#7838,#7840));
++#7842=FACE_OUTER_BOUND('',#7841,.F.);
++#7843=ADVANCED_FACE('',(#7842),#7833,.F.);
++#7844=CARTESIAN_POINT('',(2.013258252147E1,1.15E1,9.132582521472E0));
++#7845=DIRECTION('',(0.E0,1.E0,0.E0));
++#7846=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7847=AXIS2_PLACEMENT_3D('',#7844,#7845,#7846);
++#7848=CYLINDRICAL_SURFACE('',#7847,6.25E-2);
++#7849=ORIENTED_EDGE('',*,*,#7148,.F.);
++#7850=ORIENTED_EDGE('',*,*,#7839,.T.);
++#7852=ORIENTED_EDGE('',*,*,#7851,.T.);
++#7853=ORIENTED_EDGE('',*,*,#7835,.F.);
++#7854=EDGE_LOOP('',(#7849,#7850,#7852,#7853));
++#7855=FACE_OUTER_BOUND('',#7854,.F.);
++#7856=ADVANCED_FACE('',(#7855),#7848,.F.);
++#7857=CARTESIAN_POINT('',(2.013258252147E1,1.125E1,9.132582521472E0));
++#7858=DIRECTION('',(0.E0,1.E0,0.E0));
++#7859=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7860=AXIS2_PLACEMENT_3D('',#7857,#7858,#7859);
++#7861=PLANE('',#7860);
++#7862=ORIENTED_EDGE('',*,*,#7837,.F.);
++#7863=ORIENTED_EDGE('',*,*,#7851,.F.);
++#7864=EDGE_LOOP('',(#7862,#7863));
++#7865=FACE_OUTER_BOUND('',#7864,.F.);
++#7866=ADVANCED_FACE('',(#7865),#7861,.T.);
++#7867=CARTESIAN_POINT('',(1.755E1,1.176878221735E0,2.975E1));
++#7868=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7869=DIRECTION('',(1.E0,0.E0,0.E0));
++#7870=AXIS2_PLACEMENT_3D('',#7867,#7868,#7869);
++#7871=CYLINDRICAL_SURFACE('',#7870,1.E-1);
++#7872=ORIENTED_EDGE('',*,*,#6346,.F.);
++#7874=ORIENTED_EDGE('',*,*,#7873,.F.);
++#7876=ORIENTED_EDGE('',*,*,#7875,.T.);
++#7878=ORIENTED_EDGE('',*,*,#7877,.T.);
++#7879=EDGE_LOOP('',(#7872,#7874,#7876,#7878));
++#7880=FACE_OUTER_BOUND('',#7879,.F.);
++#7881=ADVANCED_FACE('',(#7880),#7871,.F.);
++#7882=CARTESIAN_POINT('',(1.755E1,1.176878221735E0,2.975E1));
++#7883=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7884=DIRECTION('',(1.E0,0.E0,0.E0));
++#7885=AXIS2_PLACEMENT_3D('',#7882,#7883,#7884);
++#7886=CYLINDRICAL_SURFACE('',#7885,1.E-1);
++#7887=ORIENTED_EDGE('',*,*,#6348,.F.);
++#7888=ORIENTED_EDGE('',*,*,#7877,.F.);
++#7890=ORIENTED_EDGE('',*,*,#7889,.F.);
++#7891=ORIENTED_EDGE('',*,*,#7873,.T.);
++#7892=EDGE_LOOP('',(#7887,#7888,#7890,#7891));
++#7893=FACE_OUTER_BOUND('',#7892,.F.);
++#7894=ADVANCED_FACE('',(#7893),#7886,.F.);
++#7895=CARTESIAN_POINT('',(1.755E1,1.234346967234E0,2.975E1));
++#7896=DIRECTION('',(0.E0,1.E0,0.E0));
++#7897=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7898=AXIS2_PLACEMENT_3D('',#7895,#7896,#7897);
++#7899=CONICAL_SURFACE('',#7898,7.288815195685E-2,6.E1);
++#7901=ORIENTED_EDGE('',*,*,#7900,.F.);
++#7903=ORIENTED_EDGE('',*,*,#7902,.T.);
++#7904=ORIENTED_EDGE('',*,*,#7889,.T.);
++#7905=EDGE_LOOP('',(#7901,#7903,#7904));
++#7906=FACE_OUTER_BOUND('',#7905,.F.);
++#7907=ADVANCED_FACE('',(#7906),#7899,.F.);
++#7908=CARTESIAN_POINT('',(1.755E1,1.234346967234E0,2.975E1));
++#7909=DIRECTION('',(0.E0,1.E0,0.E0));
++#7910=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7911=AXIS2_PLACEMENT_3D('',#7908,#7909,#7910);
++#7912=CONICAL_SURFACE('',#7911,7.288815195685E-2,6.E1);
++#7913=ORIENTED_EDGE('',*,*,#7900,.T.);
++#7914=ORIENTED_EDGE('',*,*,#7875,.F.);
++#7915=ORIENTED_EDGE('',*,*,#7902,.F.);
++#7916=EDGE_LOOP('',(#7913,#7914,#7915));
++#7917=FACE_OUTER_BOUND('',#7916,.F.);
++#7918=ADVANCED_FACE('',(#7917),#7912,.F.);
++#7919=CARTESIAN_POINT('',(1.655E1,1.176878221735E0,2.975E1));
++#7920=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7921=DIRECTION('',(1.E0,0.E0,0.E0));
++#7922=AXIS2_PLACEMENT_3D('',#7919,#7920,#7921);
++#7923=CYLINDRICAL_SURFACE('',#7922,1.E-1);
++#7924=ORIENTED_EDGE('',*,*,#6352,.F.);
++#7926=ORIENTED_EDGE('',*,*,#7925,.F.);
++#7928=ORIENTED_EDGE('',*,*,#7927,.T.);
++#7930=ORIENTED_EDGE('',*,*,#7929,.T.);
++#7931=EDGE_LOOP('',(#7924,#7926,#7928,#7930));
++#7932=FACE_OUTER_BOUND('',#7931,.F.);
++#7933=ADVANCED_FACE('',(#7932),#7923,.F.);
++#7934=CARTESIAN_POINT('',(1.655E1,1.176878221735E0,2.975E1));
++#7935=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7936=DIRECTION('',(1.E0,0.E0,0.E0));
++#7937=AXIS2_PLACEMENT_3D('',#7934,#7935,#7936);
++#7938=CYLINDRICAL_SURFACE('',#7937,1.E-1);
++#7939=ORIENTED_EDGE('',*,*,#6354,.F.);
++#7940=ORIENTED_EDGE('',*,*,#7929,.F.);
++#7942=ORIENTED_EDGE('',*,*,#7941,.F.);
++#7943=ORIENTED_EDGE('',*,*,#7925,.T.);
++#7944=EDGE_LOOP('',(#7939,#7940,#7942,#7943));
++#7945=FACE_OUTER_BOUND('',#7944,.F.);
++#7946=ADVANCED_FACE('',(#7945),#7938,.F.);
++#7947=CARTESIAN_POINT('',(1.655E1,1.234346967234E0,2.975E1));
++#7948=DIRECTION('',(0.E0,1.E0,0.E0));
++#7949=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7950=AXIS2_PLACEMENT_3D('',#7947,#7948,#7949);
++#7951=CONICAL_SURFACE('',#7950,7.288815195685E-2,6.E1);
++#7953=ORIENTED_EDGE('',*,*,#7952,.F.);
++#7955=ORIENTED_EDGE('',*,*,#7954,.T.);
++#7956=ORIENTED_EDGE('',*,*,#7941,.T.);
++#7957=EDGE_LOOP('',(#7953,#7955,#7956));
++#7958=FACE_OUTER_BOUND('',#7957,.F.);
++#7959=ADVANCED_FACE('',(#7958),#7951,.F.);
++#7960=CARTESIAN_POINT('',(1.655E1,1.234346967234E0,2.975E1));
++#7961=DIRECTION('',(0.E0,1.E0,0.E0));
++#7962=DIRECTION('',(-1.E0,0.E0,0.E0));
++#7963=AXIS2_PLACEMENT_3D('',#7960,#7961,#7962);
++#7964=CONICAL_SURFACE('',#7963,7.288815195685E-2,6.E1);
++#7965=ORIENTED_EDGE('',*,*,#7952,.T.);
++#7966=ORIENTED_EDGE('',*,*,#7927,.F.);
++#7967=ORIENTED_EDGE('',*,*,#7954,.F.);
++#7968=EDGE_LOOP('',(#7965,#7966,#7967));
++#7969=FACE_OUTER_BOUND('',#7968,.F.);
++#7970=ADVANCED_FACE('',(#7969),#7964,.F.);
++#7971=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#7972=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7973=DIRECTION('',(1.E0,0.E0,0.E0));
++#7974=AXIS2_PLACEMENT_3D('',#7971,#7972,#7973);
++#7975=CYLINDRICAL_SURFACE('',#7974,2.575E-1);
++#7976=ORIENTED_EDGE('',*,*,#6248,.T.);
++#7978=ORIENTED_EDGE('',*,*,#7977,.T.);
++#7980=ORIENTED_EDGE('',*,*,#7979,.F.);
++#7982=ORIENTED_EDGE('',*,*,#7981,.F.);
++#7983=EDGE_LOOP('',(#7976,#7978,#7980,#7982));
++#7984=FACE_OUTER_BOUND('',#7983,.F.);
++#7985=ADVANCED_FACE('',(#7984),#7975,.F.);
++#7986=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#7987=DIRECTION('',(0.E0,-1.E0,0.E0));
++#7988=DIRECTION('',(1.E0,0.E0,0.E0));
++#7989=AXIS2_PLACEMENT_3D('',#7986,#7987,#7988);
++#7990=CYLINDRICAL_SURFACE('',#7989,2.575E-1);
++#7991=ORIENTED_EDGE('',*,*,#6250,.T.);
++#7992=ORIENTED_EDGE('',*,*,#7981,.T.);
++#7994=ORIENTED_EDGE('',*,*,#7993,.F.);
++#7995=ORIENTED_EDGE('',*,*,#7977,.F.);
++#7996=EDGE_LOOP('',(#7991,#7992,#7994,#7995));
++#7997=FACE_OUTER_BOUND('',#7996,.F.);
++#7998=ADVANCED_FACE('',(#7997),#7990,.F.);
++#7999=CARTESIAN_POINT('',(1.125E0,1.E0,6.E0));
++#8000=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8001=DIRECTION('',(1.E0,0.E0,0.E0));
++#8002=AXIS2_PLACEMENT_3D('',#7999,#8000,#8001);
++#8003=PLANE('',#8002);
++#8004=ORIENTED_EDGE('',*,*,#7979,.T.);
++#8005=ORIENTED_EDGE('',*,*,#7993,.T.);
++#8006=EDGE_LOOP('',(#8004,#8005));
++#8007=FACE_OUTER_BOUND('',#8006,.F.);
++#8009=ORIENTED_EDGE('',*,*,#8008,.F.);
++#8011=ORIENTED_EDGE('',*,*,#8010,.F.);
++#8012=EDGE_LOOP('',(#8009,#8011));
++#8013=FACE_BOUND('',#8012,.F.);
++#8014=ADVANCED_FACE('',(#8007,#8013),#8003,.F.);
++#8015=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#8016=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8017=DIRECTION('',(1.E0,0.E0,0.E0));
++#8018=AXIS2_PLACEMENT_3D('',#8015,#8016,#8017);
++#8019=CYLINDRICAL_SURFACE('',#8018,1.925E-1);
++#8020=ORIENTED_EDGE('',*,*,#8008,.T.);
++#8022=ORIENTED_EDGE('',*,*,#8021,.T.);
++#8023=ORIENTED_EDGE('',*,*,#5626,.F.);
++#8025=ORIENTED_EDGE('',*,*,#8024,.F.);
++#8026=EDGE_LOOP('',(#8020,#8022,#8023,#8025));
++#8027=FACE_OUTER_BOUND('',#8026,.F.);
++#8028=ADVANCED_FACE('',(#8027),#8019,.F.);
++#8029=CARTESIAN_POINT('',(1.125E0,1.5E0,6.E0));
++#8030=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8031=DIRECTION('',(1.E0,0.E0,0.E0));
++#8032=AXIS2_PLACEMENT_3D('',#8029,#8030,#8031);
++#8033=CYLINDRICAL_SURFACE('',#8032,1.925E-1);
++#8034=ORIENTED_EDGE('',*,*,#8010,.T.);
++#8035=ORIENTED_EDGE('',*,*,#8024,.T.);
++#8036=ORIENTED_EDGE('',*,*,#5628,.F.);
++#8037=ORIENTED_EDGE('',*,*,#8021,.F.);
++#8038=EDGE_LOOP('',(#8034,#8035,#8036,#8037));
++#8039=FACE_OUTER_BOUND('',#8038,.F.);
++#8040=ADVANCED_FACE('',(#8039),#8033,.F.);
++#8041=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#8042=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8043=DIRECTION('',(1.E0,0.E0,0.E0));
++#8044=AXIS2_PLACEMENT_3D('',#8041,#8042,#8043);
++#8045=CYLINDRICAL_SURFACE('',#8044,2.575E-1);
++#8046=ORIENTED_EDGE('',*,*,#6358,.T.);
++#8048=ORIENTED_EDGE('',*,*,#8047,.T.);
++#8050=ORIENTED_EDGE('',*,*,#8049,.F.);
++#8052=ORIENTED_EDGE('',*,*,#8051,.F.);
++#8053=EDGE_LOOP('',(#8046,#8048,#8050,#8052));
++#8054=FACE_OUTER_BOUND('',#8053,.F.);
++#8055=ADVANCED_FACE('',(#8054),#8045,.F.);
++#8056=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#8057=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8058=DIRECTION('',(1.E0,0.E0,0.E0));
++#8059=AXIS2_PLACEMENT_3D('',#8056,#8057,#8058);
++#8060=CYLINDRICAL_SURFACE('',#8059,2.575E-1);
++#8061=ORIENTED_EDGE('',*,*,#6360,.T.);
++#8062=ORIENTED_EDGE('',*,*,#8051,.T.);
++#8064=ORIENTED_EDGE('',*,*,#8063,.F.);
++#8065=ORIENTED_EDGE('',*,*,#8047,.F.);
++#8066=EDGE_LOOP('',(#8061,#8062,#8064,#8065));
++#8067=FACE_OUTER_BOUND('',#8066,.F.);
++#8068=ADVANCED_FACE('',(#8067),#8060,.F.);
++#8069=CARTESIAN_POINT('',(1.125E0,1.E0,1.8E1));
++#8070=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8071=DIRECTION('',(1.E0,0.E0,0.E0));
++#8072=AXIS2_PLACEMENT_3D('',#8069,#8070,#8071);
++#8073=PLANE('',#8072);
++#8074=ORIENTED_EDGE('',*,*,#8049,.T.);
++#8075=ORIENTED_EDGE('',*,*,#8063,.T.);
++#8076=EDGE_LOOP('',(#8074,#8075));
++#8077=FACE_OUTER_BOUND('',#8076,.F.);
++#8079=ORIENTED_EDGE('',*,*,#8078,.F.);
++#8081=ORIENTED_EDGE('',*,*,#8080,.F.);
++#8082=EDGE_LOOP('',(#8079,#8081));
++#8083=FACE_BOUND('',#8082,.F.);
++#8084=ADVANCED_FACE('',(#8077,#8083),#8073,.F.);
++#8085=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#8086=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8087=DIRECTION('',(1.E0,0.E0,0.E0));
++#8088=AXIS2_PLACEMENT_3D('',#8085,#8086,#8087);
++#8089=CYLINDRICAL_SURFACE('',#8088,1.925E-1);
++#8090=ORIENTED_EDGE('',*,*,#8078,.T.);
++#8092=ORIENTED_EDGE('',*,*,#8091,.T.);
++#8093=ORIENTED_EDGE('',*,*,#5614,.F.);
++#8095=ORIENTED_EDGE('',*,*,#8094,.F.);
++#8096=EDGE_LOOP('',(#8090,#8092,#8093,#8095));
++#8097=FACE_OUTER_BOUND('',#8096,.F.);
++#8098=ADVANCED_FACE('',(#8097),#8089,.F.);
++#8099=CARTESIAN_POINT('',(1.125E0,1.5E0,1.8E1));
++#8100=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8101=DIRECTION('',(1.E0,0.E0,0.E0));
++#8102=AXIS2_PLACEMENT_3D('',#8099,#8100,#8101);
++#8103=CYLINDRICAL_SURFACE('',#8102,1.925E-1);
++#8104=ORIENTED_EDGE('',*,*,#8080,.T.);
++#8105=ORIENTED_EDGE('',*,*,#8094,.T.);
++#8106=ORIENTED_EDGE('',*,*,#5616,.F.);
++#8107=ORIENTED_EDGE('',*,*,#8091,.F.);
++#8108=EDGE_LOOP('',(#8104,#8105,#8106,#8107));
++#8109=FACE_OUTER_BOUND('',#8108,.F.);
++#8110=ADVANCED_FACE('',(#8109),#8103,.F.);
++#8111=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#8112=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8113=DIRECTION('',(1.E0,0.E0,0.E0));
++#8114=AXIS2_PLACEMENT_3D('',#8111,#8112,#8113);
++#8115=CYLINDRICAL_SURFACE('',#8114,2.575E-1);
++#8116=ORIENTED_EDGE('',*,*,#6364,.T.);
++#8118=ORIENTED_EDGE('',*,*,#8117,.T.);
++#8120=ORIENTED_EDGE('',*,*,#8119,.F.);
++#8122=ORIENTED_EDGE('',*,*,#8121,.F.);
++#8123=EDGE_LOOP('',(#8116,#8118,#8120,#8122));
++#8124=FACE_OUTER_BOUND('',#8123,.F.);
++#8125=ADVANCED_FACE('',(#8124),#8115,.F.);
++#8126=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#8127=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8128=DIRECTION('',(1.E0,0.E0,0.E0));
++#8129=AXIS2_PLACEMENT_3D('',#8126,#8127,#8128);
++#8130=CYLINDRICAL_SURFACE('',#8129,2.575E-1);
++#8131=ORIENTED_EDGE('',*,*,#6366,.T.);
++#8132=ORIENTED_EDGE('',*,*,#8121,.T.);
++#8134=ORIENTED_EDGE('',*,*,#8133,.F.);
++#8135=ORIENTED_EDGE('',*,*,#8117,.F.);
++#8136=EDGE_LOOP('',(#8131,#8132,#8134,#8135));
++#8137=FACE_OUTER_BOUND('',#8136,.F.);
++#8138=ADVANCED_FACE('',(#8137),#8130,.F.);
++#8139=CARTESIAN_POINT('',(1.125E0,1.E0,2.4E1));
++#8140=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8141=DIRECTION('',(1.E0,0.E0,0.E0));
++#8142=AXIS2_PLACEMENT_3D('',#8139,#8140,#8141);
++#8143=PLANE('',#8142);
++#8144=ORIENTED_EDGE('',*,*,#8119,.T.);
++#8145=ORIENTED_EDGE('',*,*,#8133,.T.);
++#8146=EDGE_LOOP('',(#8144,#8145));
++#8147=FACE_OUTER_BOUND('',#8146,.F.);
++#8149=ORIENTED_EDGE('',*,*,#8148,.F.);
++#8151=ORIENTED_EDGE('',*,*,#8150,.F.);
++#8152=EDGE_LOOP('',(#8149,#8151));
++#8153=FACE_BOUND('',#8152,.F.);
++#8154=ADVANCED_FACE('',(#8147,#8153),#8143,.F.);
++#8155=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#8156=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8157=DIRECTION('',(1.E0,0.E0,0.E0));
++#8158=AXIS2_PLACEMENT_3D('',#8155,#8156,#8157);
++#8159=CYLINDRICAL_SURFACE('',#8158,1.925E-1);
++#8160=ORIENTED_EDGE('',*,*,#8148,.T.);
++#8162=ORIENTED_EDGE('',*,*,#8161,.T.);
++#8163=ORIENTED_EDGE('',*,*,#5608,.F.);
++#8165=ORIENTED_EDGE('',*,*,#8164,.F.);
++#8166=EDGE_LOOP('',(#8160,#8162,#8163,#8165));
++#8167=FACE_OUTER_BOUND('',#8166,.F.);
++#8168=ADVANCED_FACE('',(#8167),#8159,.F.);
++#8169=CARTESIAN_POINT('',(1.125E0,1.5E0,2.4E1));
++#8170=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8171=DIRECTION('',(1.E0,0.E0,0.E0));
++#8172=AXIS2_PLACEMENT_3D('',#8169,#8170,#8171);
++#8173=CYLINDRICAL_SURFACE('',#8172,1.925E-1);
++#8174=ORIENTED_EDGE('',*,*,#8150,.T.);
++#8175=ORIENTED_EDGE('',*,*,#8164,.T.);
++#8176=ORIENTED_EDGE('',*,*,#5610,.F.);
++#8177=ORIENTED_EDGE('',*,*,#8161,.F.);
++#8178=EDGE_LOOP('',(#8174,#8175,#8176,#8177));
++#8179=FACE_OUTER_BOUND('',#8178,.F.);
++#8180=ADVANCED_FACE('',(#8179),#8173,.F.);
++#8181=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#8182=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8183=DIRECTION('',(1.E0,0.E0,0.E0));
++#8184=AXIS2_PLACEMENT_3D('',#8181,#8182,#8183);
++#8185=CYLINDRICAL_SURFACE('',#8184,2.575E-1);
++#8186=ORIENTED_EDGE('',*,*,#6254,.T.);
++#8188=ORIENTED_EDGE('',*,*,#8187,.T.);
++#8190=ORIENTED_EDGE('',*,*,#8189,.F.);
++#8192=ORIENTED_EDGE('',*,*,#8191,.F.);
++#8193=EDGE_LOOP('',(#8186,#8188,#8190,#8192));
++#8194=FACE_OUTER_BOUND('',#8193,.F.);
++#8195=ADVANCED_FACE('',(#8194),#8185,.F.);
++#8196=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#8197=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8198=DIRECTION('',(1.E0,0.E0,0.E0));
++#8199=AXIS2_PLACEMENT_3D('',#8196,#8197,#8198);
++#8200=CYLINDRICAL_SURFACE('',#8199,2.575E-1);
++#8201=ORIENTED_EDGE('',*,*,#6256,.T.);
++#8202=ORIENTED_EDGE('',*,*,#8191,.T.);
++#8204=ORIENTED_EDGE('',*,*,#8203,.F.);
++#8205=ORIENTED_EDGE('',*,*,#8187,.F.);
++#8206=EDGE_LOOP('',(#8201,#8202,#8204,#8205));
++#8207=FACE_OUTER_BOUND('',#8206,.F.);
++#8208=ADVANCED_FACE('',(#8207),#8200,.F.);
++#8209=CARTESIAN_POINT('',(2.2875E1,1.E0,6.E0));
++#8210=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8211=DIRECTION('',(1.E0,0.E0,0.E0));
++#8212=AXIS2_PLACEMENT_3D('',#8209,#8210,#8211);
++#8213=PLANE('',#8212);
++#8214=ORIENTED_EDGE('',*,*,#8189,.T.);
++#8215=ORIENTED_EDGE('',*,*,#8203,.T.);
++#8216=EDGE_LOOP('',(#8214,#8215));
++#8217=FACE_OUTER_BOUND('',#8216,.F.);
++#8219=ORIENTED_EDGE('',*,*,#8218,.F.);
++#8221=ORIENTED_EDGE('',*,*,#8220,.F.);
++#8222=EDGE_LOOP('',(#8219,#8221));
++#8223=FACE_BOUND('',#8222,.F.);
++#8224=ADVANCED_FACE('',(#8217,#8223),#8213,.F.);
++#8225=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#8226=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8227=DIRECTION('',(1.E0,0.E0,0.E0));
++#8228=AXIS2_PLACEMENT_3D('',#8225,#8226,#8227);
++#8229=CYLINDRICAL_SURFACE('',#8228,1.925E-1);
++#8230=ORIENTED_EDGE('',*,*,#8218,.T.);
++#8232=ORIENTED_EDGE('',*,*,#8231,.T.);
++#8233=ORIENTED_EDGE('',*,*,#5602,.F.);
++#8235=ORIENTED_EDGE('',*,*,#8234,.F.);
++#8236=EDGE_LOOP('',(#8230,#8232,#8233,#8235));
++#8237=FACE_OUTER_BOUND('',#8236,.F.);
++#8238=ADVANCED_FACE('',(#8237),#8229,.F.);
++#8239=CARTESIAN_POINT('',(2.2875E1,1.5E0,6.E0));
++#8240=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8241=DIRECTION('',(1.E0,0.E0,0.E0));
++#8242=AXIS2_PLACEMENT_3D('',#8239,#8240,#8241);
++#8243=CYLINDRICAL_SURFACE('',#8242,1.925E-1);
++#8244=ORIENTED_EDGE('',*,*,#8220,.T.);
++#8245=ORIENTED_EDGE('',*,*,#8234,.T.);
++#8246=ORIENTED_EDGE('',*,*,#5604,.F.);
++#8247=ORIENTED_EDGE('',*,*,#8231,.F.);
++#8248=EDGE_LOOP('',(#8244,#8245,#8246,#8247));
++#8249=FACE_OUTER_BOUND('',#8248,.F.);
++#8250=ADVANCED_FACE('',(#8249),#8243,.F.);
++#8251=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#8252=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8253=DIRECTION('',(1.E0,0.E0,0.E0));
++#8254=AXIS2_PLACEMENT_3D('',#8251,#8252,#8253);
++#8255=CYLINDRICAL_SURFACE('',#8254,2.575E-1);
++#8256=ORIENTED_EDGE('',*,*,#6370,.T.);
++#8258=ORIENTED_EDGE('',*,*,#8257,.T.);
++#8260=ORIENTED_EDGE('',*,*,#8259,.F.);
++#8262=ORIENTED_EDGE('',*,*,#8261,.F.);
++#8263=EDGE_LOOP('',(#8256,#8258,#8260,#8262));
++#8264=FACE_OUTER_BOUND('',#8263,.F.);
++#8265=ADVANCED_FACE('',(#8264),#8255,.F.);
++#8266=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#8267=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8268=DIRECTION('',(1.E0,0.E0,0.E0));
++#8269=AXIS2_PLACEMENT_3D('',#8266,#8267,#8268);
++#8270=CYLINDRICAL_SURFACE('',#8269,2.575E-1);
++#8271=ORIENTED_EDGE('',*,*,#6372,.T.);
++#8272=ORIENTED_EDGE('',*,*,#8261,.T.);
++#8274=ORIENTED_EDGE('',*,*,#8273,.F.);
++#8275=ORIENTED_EDGE('',*,*,#8257,.F.);
++#8276=EDGE_LOOP('',(#8271,#8272,#8274,#8275));
++#8277=FACE_OUTER_BOUND('',#8276,.F.);
++#8278=ADVANCED_FACE('',(#8277),#8270,.F.);
++#8279=CARTESIAN_POINT('',(2.2875E1,1.E0,1.8E1));
++#8280=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8281=DIRECTION('',(1.E0,0.E0,0.E0));
++#8282=AXIS2_PLACEMENT_3D('',#8279,#8280,#8281);
++#8283=PLANE('',#8282);
++#8284=ORIENTED_EDGE('',*,*,#8259,.T.);
++#8285=ORIENTED_EDGE('',*,*,#8273,.T.);
++#8286=EDGE_LOOP('',(#8284,#8285));
++#8287=FACE_OUTER_BOUND('',#8286,.F.);
++#8289=ORIENTED_EDGE('',*,*,#8288,.F.);
++#8291=ORIENTED_EDGE('',*,*,#8290,.F.);
++#8292=EDGE_LOOP('',(#8289,#8291));
++#8293=FACE_BOUND('',#8292,.F.);
++#8294=ADVANCED_FACE('',(#8287,#8293),#8283,.F.);
++#8295=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#8296=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8297=DIRECTION('',(1.E0,0.E0,0.E0));
++#8298=AXIS2_PLACEMENT_3D('',#8295,#8296,#8297);
++#8299=CYLINDRICAL_SURFACE('',#8298,1.925E-1);
++#8300=ORIENTED_EDGE('',*,*,#8288,.T.);
++#8302=ORIENTED_EDGE('',*,*,#8301,.T.);
++#8303=ORIENTED_EDGE('',*,*,#5590,.F.);
++#8305=ORIENTED_EDGE('',*,*,#8304,.F.);
++#8306=EDGE_LOOP('',(#8300,#8302,#8303,#8305));
++#8307=FACE_OUTER_BOUND('',#8306,.F.);
++#8308=ADVANCED_FACE('',(#8307),#8299,.F.);
++#8309=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.8E1));
++#8310=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8311=DIRECTION('',(1.E0,0.E0,0.E0));
++#8312=AXIS2_PLACEMENT_3D('',#8309,#8310,#8311);
++#8313=CYLINDRICAL_SURFACE('',#8312,1.925E-1);
++#8314=ORIENTED_EDGE('',*,*,#8290,.T.);
++#8315=ORIENTED_EDGE('',*,*,#8304,.T.);
++#8316=ORIENTED_EDGE('',*,*,#5592,.F.);
++#8317=ORIENTED_EDGE('',*,*,#8301,.F.);
++#8318=EDGE_LOOP('',(#8314,#8315,#8316,#8317));
++#8319=FACE_OUTER_BOUND('',#8318,.F.);
++#8320=ADVANCED_FACE('',(#8319),#8313,.F.);
++#8321=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#8322=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8323=DIRECTION('',(1.E0,0.E0,0.E0));
++#8324=AXIS2_PLACEMENT_3D('',#8321,#8322,#8323);
++#8325=CYLINDRICAL_SURFACE('',#8324,2.575E-1);
++#8326=ORIENTED_EDGE('',*,*,#6376,.T.);
++#8328=ORIENTED_EDGE('',*,*,#8327,.T.);
++#8330=ORIENTED_EDGE('',*,*,#8329,.F.);
++#8332=ORIENTED_EDGE('',*,*,#8331,.F.);
++#8333=EDGE_LOOP('',(#8326,#8328,#8330,#8332));
++#8334=FACE_OUTER_BOUND('',#8333,.F.);
++#8335=ADVANCED_FACE('',(#8334),#8325,.F.);
++#8336=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#8337=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8338=DIRECTION('',(1.E0,0.E0,0.E0));
++#8339=AXIS2_PLACEMENT_3D('',#8336,#8337,#8338);
++#8340=CYLINDRICAL_SURFACE('',#8339,2.575E-1);
++#8341=ORIENTED_EDGE('',*,*,#6378,.T.);
++#8342=ORIENTED_EDGE('',*,*,#8331,.T.);
++#8344=ORIENTED_EDGE('',*,*,#8343,.F.);
++#8345=ORIENTED_EDGE('',*,*,#8327,.F.);
++#8346=EDGE_LOOP('',(#8341,#8342,#8344,#8345));
++#8347=FACE_OUTER_BOUND('',#8346,.F.);
++#8348=ADVANCED_FACE('',(#8347),#8340,.F.);
++#8349=CARTESIAN_POINT('',(2.2875E1,1.E0,2.4E1));
++#8350=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8351=DIRECTION('',(1.E0,0.E0,0.E0));
++#8352=AXIS2_PLACEMENT_3D('',#8349,#8350,#8351);
++#8353=PLANE('',#8352);
++#8354=ORIENTED_EDGE('',*,*,#8329,.T.);
++#8355=ORIENTED_EDGE('',*,*,#8343,.T.);
++#8356=EDGE_LOOP('',(#8354,#8355));
++#8357=FACE_OUTER_BOUND('',#8356,.F.);
++#8359=ORIENTED_EDGE('',*,*,#8358,.F.);
++#8361=ORIENTED_EDGE('',*,*,#8360,.F.);
++#8362=EDGE_LOOP('',(#8359,#8361));
++#8363=FACE_BOUND('',#8362,.F.);
++#8364=ADVANCED_FACE('',(#8357,#8363),#8353,.F.);
++#8365=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#8366=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8367=DIRECTION('',(1.E0,0.E0,0.E0));
++#8368=AXIS2_PLACEMENT_3D('',#8365,#8366,#8367);
++#8369=CYLINDRICAL_SURFACE('',#8368,1.925E-1);
++#8370=ORIENTED_EDGE('',*,*,#8358,.T.);
++#8372=ORIENTED_EDGE('',*,*,#8371,.T.);
++#8373=ORIENTED_EDGE('',*,*,#5584,.F.);
++#8375=ORIENTED_EDGE('',*,*,#8374,.F.);
++#8376=EDGE_LOOP('',(#8370,#8372,#8373,#8375));
++#8377=FACE_OUTER_BOUND('',#8376,.F.);
++#8378=ADVANCED_FACE('',(#8377),#8369,.F.);
++#8379=CARTESIAN_POINT('',(2.2875E1,1.5E0,2.4E1));
++#8380=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8381=DIRECTION('',(1.E0,0.E0,0.E0));
++#8382=AXIS2_PLACEMENT_3D('',#8379,#8380,#8381);
++#8383=CYLINDRICAL_SURFACE('',#8382,1.925E-1);
++#8384=ORIENTED_EDGE('',*,*,#8360,.T.);
++#8385=ORIENTED_EDGE('',*,*,#8374,.T.);
++#8386=ORIENTED_EDGE('',*,*,#5586,.F.);
++#8387=ORIENTED_EDGE('',*,*,#8371,.F.);
++#8388=EDGE_LOOP('',(#8384,#8385,#8386,#8387));
++#8389=FACE_OUTER_BOUND('',#8388,.F.);
++#8390=ADVANCED_FACE('',(#8389),#8383,.F.);
++#8391=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#8392=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8393=DIRECTION('',(1.E0,0.E0,0.E0));
++#8394=AXIS2_PLACEMENT_3D('',#8391,#8392,#8393);
++#8395=CYLINDRICAL_SURFACE('',#8394,2.56E-1);
++#8396=ORIENTED_EDGE('',*,*,#6260,.T.);
++#8398=ORIENTED_EDGE('',*,*,#8397,.T.);
++#8400=ORIENTED_EDGE('',*,*,#8399,.F.);
++#8402=ORIENTED_EDGE('',*,*,#8401,.F.);
++#8403=EDGE_LOOP('',(#8396,#8398,#8400,#8402));
++#8404=FACE_OUTER_BOUND('',#8403,.F.);
++#8405=ADVANCED_FACE('',(#8404),#8395,.F.);
++#8406=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#8407=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8408=DIRECTION('',(1.E0,0.E0,0.E0));
++#8409=AXIS2_PLACEMENT_3D('',#8406,#8407,#8408);
++#8410=CYLINDRICAL_SURFACE('',#8409,2.56E-1);
++#8411=ORIENTED_EDGE('',*,*,#6262,.T.);
++#8412=ORIENTED_EDGE('',*,*,#8401,.T.);
++#8414=ORIENTED_EDGE('',*,*,#8413,.F.);
++#8415=ORIENTED_EDGE('',*,*,#8397,.F.);
++#8416=EDGE_LOOP('',(#8411,#8412,#8414,#8415));
++#8417=FACE_OUTER_BOUND('',#8416,.F.);
++#8418=ADVANCED_FACE('',(#8417),#8410,.F.);
++#8419=CARTESIAN_POINT('',(6.E0,1.E0,1.25E0));
++#8420=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8421=DIRECTION('',(1.E0,0.E0,0.E0));
++#8422=AXIS2_PLACEMENT_3D('',#8419,#8420,#8421);
++#8423=PLANE('',#8422);
++#8424=ORIENTED_EDGE('',*,*,#8399,.T.);
++#8425=ORIENTED_EDGE('',*,*,#8413,.T.);
++#8426=EDGE_LOOP('',(#8424,#8425));
++#8427=FACE_OUTER_BOUND('',#8426,.F.);
++#8429=ORIENTED_EDGE('',*,*,#8428,.F.);
++#8431=ORIENTED_EDGE('',*,*,#8430,.F.);
++#8432=EDGE_LOOP('',(#8429,#8431));
++#8433=FACE_BOUND('',#8432,.F.);
++#8434=ADVANCED_FACE('',(#8427,#8433),#8423,.F.);
++#8435=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#8436=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8437=DIRECTION('',(1.E0,0.E0,0.E0));
++#8438=AXIS2_PLACEMENT_3D('',#8435,#8436,#8437);
++#8439=CYLINDRICAL_SURFACE('',#8438,1.925E-1);
++#8440=ORIENTED_EDGE('',*,*,#8428,.T.);
++#8442=ORIENTED_EDGE('',*,*,#8441,.T.);
++#8443=ORIENTED_EDGE('',*,*,#5632,.F.);
++#8445=ORIENTED_EDGE('',*,*,#8444,.F.);
++#8446=EDGE_LOOP('',(#8440,#8442,#8443,#8445));
++#8447=FACE_OUTER_BOUND('',#8446,.F.);
++#8448=ADVANCED_FACE('',(#8447),#8439,.F.);
++#8449=CARTESIAN_POINT('',(6.E0,1.5E0,1.25E0));
++#8450=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8451=DIRECTION('',(1.E0,0.E0,0.E0));
++#8452=AXIS2_PLACEMENT_3D('',#8449,#8450,#8451);
++#8453=CYLINDRICAL_SURFACE('',#8452,1.925E-1);
++#8454=ORIENTED_EDGE('',*,*,#8430,.T.);
++#8455=ORIENTED_EDGE('',*,*,#8444,.T.);
++#8456=ORIENTED_EDGE('',*,*,#5634,.F.);
++#8457=ORIENTED_EDGE('',*,*,#8441,.F.);
++#8458=EDGE_LOOP('',(#8454,#8455,#8456,#8457));
++#8459=FACE_OUTER_BOUND('',#8458,.F.);
++#8460=ADVANCED_FACE('',(#8459),#8453,.F.);
++#8461=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#8462=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8463=DIRECTION('',(1.E0,0.E0,0.E0));
++#8464=AXIS2_PLACEMENT_3D('',#8461,#8462,#8463);
++#8465=CYLINDRICAL_SURFACE('',#8464,2.56E-1);
++#8466=ORIENTED_EDGE('',*,*,#6266,.T.);
++#8468=ORIENTED_EDGE('',*,*,#8467,.T.);
++#8470=ORIENTED_EDGE('',*,*,#8469,.F.);
++#8472=ORIENTED_EDGE('',*,*,#8471,.F.);
++#8473=EDGE_LOOP('',(#8466,#8468,#8470,#8472));
++#8474=FACE_OUTER_BOUND('',#8473,.F.);
++#8475=ADVANCED_FACE('',(#8474),#8465,.F.);
++#8476=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#8477=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8478=DIRECTION('',(1.E0,0.E0,0.E0));
++#8479=AXIS2_PLACEMENT_3D('',#8476,#8477,#8478);
++#8480=CYLINDRICAL_SURFACE('',#8479,2.56E-1);
++#8481=ORIENTED_EDGE('',*,*,#6268,.T.);
++#8482=ORIENTED_EDGE('',*,*,#8471,.T.);
++#8484=ORIENTED_EDGE('',*,*,#8483,.F.);
++#8485=ORIENTED_EDGE('',*,*,#8467,.F.);
++#8486=EDGE_LOOP('',(#8481,#8482,#8484,#8485));
++#8487=FACE_OUTER_BOUND('',#8486,.F.);
++#8488=ADVANCED_FACE('',(#8487),#8480,.F.);
++#8489=CARTESIAN_POINT('',(1.2E1,1.E0,1.25E0));
++#8490=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8491=DIRECTION('',(1.E0,0.E0,0.E0));
++#8492=AXIS2_PLACEMENT_3D('',#8489,#8490,#8491);
++#8493=PLANE('',#8492);
++#8494=ORIENTED_EDGE('',*,*,#8469,.T.);
++#8495=ORIENTED_EDGE('',*,*,#8483,.T.);
++#8496=EDGE_LOOP('',(#8494,#8495));
++#8497=FACE_OUTER_BOUND('',#8496,.F.);
++#8499=ORIENTED_EDGE('',*,*,#8498,.F.);
++#8501=ORIENTED_EDGE('',*,*,#8500,.F.);
++#8502=EDGE_LOOP('',(#8499,#8501));
++#8503=FACE_BOUND('',#8502,.F.);
++#8504=ADVANCED_FACE('',(#8497,#8503),#8493,.F.);
++#8505=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#8506=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8507=DIRECTION('',(1.E0,0.E0,0.E0));
++#8508=AXIS2_PLACEMENT_3D('',#8505,#8506,#8507);
++#8509=CYLINDRICAL_SURFACE('',#8508,1.925E-1);
++#8510=ORIENTED_EDGE('',*,*,#8498,.T.);
++#8512=ORIENTED_EDGE('',*,*,#8511,.T.);
++#8513=ORIENTED_EDGE('',*,*,#5578,.F.);
++#8515=ORIENTED_EDGE('',*,*,#8514,.F.);
++#8516=EDGE_LOOP('',(#8510,#8512,#8513,#8515));
++#8517=FACE_OUTER_BOUND('',#8516,.F.);
++#8518=ADVANCED_FACE('',(#8517),#8509,.F.);
++#8519=CARTESIAN_POINT('',(1.2E1,1.5E0,1.25E0));
++#8520=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8521=DIRECTION('',(1.E0,0.E0,0.E0));
++#8522=AXIS2_PLACEMENT_3D('',#8519,#8520,#8521);
++#8523=CYLINDRICAL_SURFACE('',#8522,1.925E-1);
++#8524=ORIENTED_EDGE('',*,*,#8500,.T.);
++#8525=ORIENTED_EDGE('',*,*,#8514,.T.);
++#8526=ORIENTED_EDGE('',*,*,#5580,.F.);
++#8527=ORIENTED_EDGE('',*,*,#8511,.F.);
++#8528=EDGE_LOOP('',(#8524,#8525,#8526,#8527));
++#8529=FACE_OUTER_BOUND('',#8528,.F.);
++#8530=ADVANCED_FACE('',(#8529),#8523,.F.);
++#8531=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#8532=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8533=DIRECTION('',(1.E0,0.E0,0.E0));
++#8534=AXIS2_PLACEMENT_3D('',#8531,#8532,#8533);
++#8535=CYLINDRICAL_SURFACE('',#8534,2.56E-1);
++#8536=ORIENTED_EDGE('',*,*,#6272,.T.);
++#8538=ORIENTED_EDGE('',*,*,#8537,.T.);
++#8540=ORIENTED_EDGE('',*,*,#8539,.F.);
++#8542=ORIENTED_EDGE('',*,*,#8541,.F.);
++#8543=EDGE_LOOP('',(#8536,#8538,#8540,#8542));
++#8544=FACE_OUTER_BOUND('',#8543,.F.);
++#8545=ADVANCED_FACE('',(#8544),#8535,.F.);
++#8546=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#8547=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8548=DIRECTION('',(1.E0,0.E0,0.E0));
++#8549=AXIS2_PLACEMENT_3D('',#8546,#8547,#8548);
++#8550=CYLINDRICAL_SURFACE('',#8549,2.56E-1);
++#8551=ORIENTED_EDGE('',*,*,#6274,.T.);
++#8552=ORIENTED_EDGE('',*,*,#8541,.T.);
++#8554=ORIENTED_EDGE('',*,*,#8553,.F.);
++#8555=ORIENTED_EDGE('',*,*,#8537,.F.);
++#8556=EDGE_LOOP('',(#8551,#8552,#8554,#8555));
++#8557=FACE_OUTER_BOUND('',#8556,.F.);
++#8558=ADVANCED_FACE('',(#8557),#8550,.F.);
++#8559=CARTESIAN_POINT('',(1.8E1,1.E0,1.25E0));
++#8560=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8561=DIRECTION('',(1.E0,0.E0,0.E0));
++#8562=AXIS2_PLACEMENT_3D('',#8559,#8560,#8561);
++#8563=PLANE('',#8562);
++#8564=ORIENTED_EDGE('',*,*,#8539,.T.);
++#8565=ORIENTED_EDGE('',*,*,#8553,.T.);
++#8566=EDGE_LOOP('',(#8564,#8565));
++#8567=FACE_OUTER_BOUND('',#8566,.F.);
++#8569=ORIENTED_EDGE('',*,*,#8568,.F.);
++#8571=ORIENTED_EDGE('',*,*,#8570,.F.);
++#8572=EDGE_LOOP('',(#8569,#8571));
++#8573=FACE_BOUND('',#8572,.F.);
++#8574=ADVANCED_FACE('',(#8567,#8573),#8563,.F.);
++#8575=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#8576=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8577=DIRECTION('',(1.E0,0.E0,0.E0));
++#8578=AXIS2_PLACEMENT_3D('',#8575,#8576,#8577);
++#8579=CYLINDRICAL_SURFACE('',#8578,1.925E-1);
++#8580=ORIENTED_EDGE('',*,*,#8568,.T.);
++#8582=ORIENTED_EDGE('',*,*,#8581,.T.);
++#8583=ORIENTED_EDGE('',*,*,#5560,.F.);
++#8585=ORIENTED_EDGE('',*,*,#8584,.F.);
++#8586=EDGE_LOOP('',(#8580,#8582,#8583,#8585));
++#8587=FACE_OUTER_BOUND('',#8586,.F.);
++#8588=ADVANCED_FACE('',(#8587),#8579,.F.);
++#8589=CARTESIAN_POINT('',(1.8E1,1.5E0,1.25E0));
++#8590=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8591=DIRECTION('',(1.E0,0.E0,0.E0));
++#8592=AXIS2_PLACEMENT_3D('',#8589,#8590,#8591);
++#8593=CYLINDRICAL_SURFACE('',#8592,1.925E-1);
++#8594=ORIENTED_EDGE('',*,*,#8570,.T.);
++#8595=ORIENTED_EDGE('',*,*,#8584,.T.);
++#8596=ORIENTED_EDGE('',*,*,#5562,.F.);
++#8597=ORIENTED_EDGE('',*,*,#8581,.F.);
++#8598=EDGE_LOOP('',(#8594,#8595,#8596,#8597));
++#8599=FACE_OUTER_BOUND('',#8598,.F.);
++#8600=ADVANCED_FACE('',(#8599),#8593,.F.);
++#8601=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#8602=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8603=DIRECTION('',(1.E0,0.E0,0.E0));
++#8604=AXIS2_PLACEMENT_3D('',#8601,#8602,#8603);
++#8605=CYLINDRICAL_SURFACE('',#8604,2.56E-1);
++#8606=ORIENTED_EDGE('',*,*,#6382,.T.);
++#8608=ORIENTED_EDGE('',*,*,#8607,.T.);
++#8610=ORIENTED_EDGE('',*,*,#8609,.F.);
++#8612=ORIENTED_EDGE('',*,*,#8611,.F.);
++#8613=EDGE_LOOP('',(#8606,#8608,#8610,#8612));
++#8614=FACE_OUTER_BOUND('',#8613,.F.);
++#8615=ADVANCED_FACE('',(#8614),#8605,.F.);
++#8616=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#8617=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8618=DIRECTION('',(1.E0,0.E0,0.E0));
++#8619=AXIS2_PLACEMENT_3D('',#8616,#8617,#8618);
++#8620=CYLINDRICAL_SURFACE('',#8619,2.56E-1);
++#8621=ORIENTED_EDGE('',*,*,#6384,.T.);
++#8622=ORIENTED_EDGE('',*,*,#8611,.T.);
++#8624=ORIENTED_EDGE('',*,*,#8623,.F.);
++#8625=ORIENTED_EDGE('',*,*,#8607,.F.);
++#8626=EDGE_LOOP('',(#8621,#8622,#8624,#8625));
++#8627=FACE_OUTER_BOUND('',#8626,.F.);
++#8628=ADVANCED_FACE('',(#8627),#8620,.F.);
++#8629=CARTESIAN_POINT('',(6.E0,1.E0,3.075E1));
++#8630=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8631=DIRECTION('',(1.E0,0.E0,0.E0));
++#8632=AXIS2_PLACEMENT_3D('',#8629,#8630,#8631);
++#8633=PLANE('',#8632);
++#8634=ORIENTED_EDGE('',*,*,#8609,.T.);
++#8635=ORIENTED_EDGE('',*,*,#8623,.T.);
++#8636=EDGE_LOOP('',(#8634,#8635));
++#8637=FACE_OUTER_BOUND('',#8636,.F.);
++#8639=ORIENTED_EDGE('',*,*,#8638,.F.);
++#8641=ORIENTED_EDGE('',*,*,#8640,.F.);
++#8642=EDGE_LOOP('',(#8639,#8641));
++#8643=FACE_BOUND('',#8642,.F.);
++#8644=ADVANCED_FACE('',(#8637,#8643),#8633,.F.);
++#8645=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#8646=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8647=DIRECTION('',(1.E0,0.E0,0.E0));
++#8648=AXIS2_PLACEMENT_3D('',#8645,#8646,#8647);
++#8649=CYLINDRICAL_SURFACE('',#8648,1.925E-1);
++#8650=ORIENTED_EDGE('',*,*,#8638,.T.);
++#8652=ORIENTED_EDGE('',*,*,#8651,.T.);
++#8653=ORIENTED_EDGE('',*,*,#5572,.F.);
++#8655=ORIENTED_EDGE('',*,*,#8654,.F.);
++#8656=EDGE_LOOP('',(#8650,#8652,#8653,#8655));
++#8657=FACE_OUTER_BOUND('',#8656,.F.);
++#8658=ADVANCED_FACE('',(#8657),#8649,.F.);
++#8659=CARTESIAN_POINT('',(6.E0,1.5E0,3.075E1));
++#8660=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8661=DIRECTION('',(1.E0,0.E0,0.E0));
++#8662=AXIS2_PLACEMENT_3D('',#8659,#8660,#8661);
++#8663=CYLINDRICAL_SURFACE('',#8662,1.925E-1);
++#8664=ORIENTED_EDGE('',*,*,#8640,.T.);
++#8665=ORIENTED_EDGE('',*,*,#8654,.T.);
++#8666=ORIENTED_EDGE('',*,*,#5574,.F.);
++#8667=ORIENTED_EDGE('',*,*,#8651,.F.);
++#8668=EDGE_LOOP('',(#8664,#8665,#8666,#8667));
++#8669=FACE_OUTER_BOUND('',#8668,.F.);
++#8670=ADVANCED_FACE('',(#8669),#8663,.F.);
++#8671=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#8672=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8673=DIRECTION('',(1.E0,0.E0,0.E0));
++#8674=AXIS2_PLACEMENT_3D('',#8671,#8672,#8673);
++#8675=CYLINDRICAL_SURFACE('',#8674,2.56E-1);
++#8676=ORIENTED_EDGE('',*,*,#6388,.T.);
++#8678=ORIENTED_EDGE('',*,*,#8677,.T.);
++#8680=ORIENTED_EDGE('',*,*,#8679,.F.);
++#8682=ORIENTED_EDGE('',*,*,#8681,.F.);
++#8683=EDGE_LOOP('',(#8676,#8678,#8680,#8682));
++#8684=FACE_OUTER_BOUND('',#8683,.F.);
++#8685=ADVANCED_FACE('',(#8684),#8675,.F.);
++#8686=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#8687=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8688=DIRECTION('',(1.E0,0.E0,0.E0));
++#8689=AXIS2_PLACEMENT_3D('',#8686,#8687,#8688);
++#8690=CYLINDRICAL_SURFACE('',#8689,2.56E-1);
++#8691=ORIENTED_EDGE('',*,*,#6390,.T.);
++#8692=ORIENTED_EDGE('',*,*,#8681,.T.);
++#8694=ORIENTED_EDGE('',*,*,#8693,.F.);
++#8695=ORIENTED_EDGE('',*,*,#8677,.F.);
++#8696=EDGE_LOOP('',(#8691,#8692,#8694,#8695));
++#8697=FACE_OUTER_BOUND('',#8696,.F.);
++#8698=ADVANCED_FACE('',(#8697),#8690,.F.);
++#8699=CARTESIAN_POINT('',(1.2E1,1.E0,3.075E1));
++#8700=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8701=DIRECTION('',(1.E0,0.E0,0.E0));
++#8702=AXIS2_PLACEMENT_3D('',#8699,#8700,#8701);
++#8703=PLANE('',#8702);
++#8704=ORIENTED_EDGE('',*,*,#8679,.T.);
++#8705=ORIENTED_EDGE('',*,*,#8693,.T.);
++#8706=EDGE_LOOP('',(#8704,#8705));
++#8707=FACE_OUTER_BOUND('',#8706,.F.);
++#8709=ORIENTED_EDGE('',*,*,#8708,.F.);
++#8711=ORIENTED_EDGE('',*,*,#8710,.F.);
++#8712=EDGE_LOOP('',(#8709,#8711));
++#8713=FACE_BOUND('',#8712,.F.);
++#8714=ADVANCED_FACE('',(#8707,#8713),#8703,.F.);
++#8715=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#8716=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8717=DIRECTION('',(1.E0,0.E0,0.E0));
++#8718=AXIS2_PLACEMENT_3D('',#8715,#8716,#8717);
++#8719=CYLINDRICAL_SURFACE('',#8718,1.925E-1);
++#8720=ORIENTED_EDGE('',*,*,#8708,.T.);
++#8722=ORIENTED_EDGE('',*,*,#8721,.T.);
++#8723=ORIENTED_EDGE('',*,*,#5566,.F.);
++#8725=ORIENTED_EDGE('',*,*,#8724,.F.);
++#8726=EDGE_LOOP('',(#8720,#8722,#8723,#8725));
++#8727=FACE_OUTER_BOUND('',#8726,.F.);
++#8728=ADVANCED_FACE('',(#8727),#8719,.F.);
++#8729=CARTESIAN_POINT('',(1.2E1,1.5E0,3.075E1));
++#8730=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8731=DIRECTION('',(1.E0,0.E0,0.E0));
++#8732=AXIS2_PLACEMENT_3D('',#8729,#8730,#8731);
++#8733=CYLINDRICAL_SURFACE('',#8732,1.925E-1);
++#8734=ORIENTED_EDGE('',*,*,#8710,.T.);
++#8735=ORIENTED_EDGE('',*,*,#8724,.T.);
++#8736=ORIENTED_EDGE('',*,*,#5568,.F.);
++#8737=ORIENTED_EDGE('',*,*,#8721,.F.);
++#8738=EDGE_LOOP('',(#8734,#8735,#8736,#8737));
++#8739=FACE_OUTER_BOUND('',#8738,.F.);
++#8740=ADVANCED_FACE('',(#8739),#8733,.F.);
++#8741=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#8742=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8743=DIRECTION('',(1.E0,0.E0,0.E0));
++#8744=AXIS2_PLACEMENT_3D('',#8741,#8742,#8743);
++#8745=CYLINDRICAL_SURFACE('',#8744,2.56E-1);
++#8746=ORIENTED_EDGE('',*,*,#6394,.T.);
++#8748=ORIENTED_EDGE('',*,*,#8747,.T.);
++#8750=ORIENTED_EDGE('',*,*,#8749,.F.);
++#8752=ORIENTED_EDGE('',*,*,#8751,.F.);
++#8753=EDGE_LOOP('',(#8746,#8748,#8750,#8752));
++#8754=FACE_OUTER_BOUND('',#8753,.F.);
++#8755=ADVANCED_FACE('',(#8754),#8745,.F.);
++#8756=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#8757=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8758=DIRECTION('',(1.E0,0.E0,0.E0));
++#8759=AXIS2_PLACEMENT_3D('',#8756,#8757,#8758);
++#8760=CYLINDRICAL_SURFACE('',#8759,2.56E-1);
++#8761=ORIENTED_EDGE('',*,*,#6396,.T.);
++#8762=ORIENTED_EDGE('',*,*,#8751,.T.);
++#8764=ORIENTED_EDGE('',*,*,#8763,.F.);
++#8765=ORIENTED_EDGE('',*,*,#8747,.F.);
++#8766=EDGE_LOOP('',(#8761,#8762,#8764,#8765));
++#8767=FACE_OUTER_BOUND('',#8766,.F.);
++#8768=ADVANCED_FACE('',(#8767),#8760,.F.);
++#8769=CARTESIAN_POINT('',(1.8E1,1.E0,3.075E1));
++#8770=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8771=DIRECTION('',(1.E0,0.E0,0.E0));
++#8772=AXIS2_PLACEMENT_3D('',#8769,#8770,#8771);
++#8773=PLANE('',#8772);
++#8774=ORIENTED_EDGE('',*,*,#8749,.T.);
++#8775=ORIENTED_EDGE('',*,*,#8763,.T.);
++#8776=EDGE_LOOP('',(#8774,#8775));
++#8777=FACE_OUTER_BOUND('',#8776,.F.);
++#8779=ORIENTED_EDGE('',*,*,#8778,.F.);
++#8781=ORIENTED_EDGE('',*,*,#8780,.F.);
++#8782=EDGE_LOOP('',(#8779,#8781));
++#8783=FACE_BOUND('',#8782,.F.);
++#8784=ADVANCED_FACE('',(#8777,#8783),#8773,.F.);
++#8785=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#8786=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8787=DIRECTION('',(1.E0,0.E0,0.E0));
++#8788=AXIS2_PLACEMENT_3D('',#8785,#8786,#8787);
++#8789=CYLINDRICAL_SURFACE('',#8788,1.925E-1);
++#8790=ORIENTED_EDGE('',*,*,#8778,.T.);
++#8792=ORIENTED_EDGE('',*,*,#8791,.T.);
++#8793=ORIENTED_EDGE('',*,*,#5554,.F.);
++#8795=ORIENTED_EDGE('',*,*,#8794,.F.);
++#8796=EDGE_LOOP('',(#8790,#8792,#8793,#8795));
++#8797=FACE_OUTER_BOUND('',#8796,.F.);
++#8798=ADVANCED_FACE('',(#8797),#8789,.F.);
++#8799=CARTESIAN_POINT('',(1.8E1,1.5E0,3.075E1));
++#8800=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8801=DIRECTION('',(1.E0,0.E0,0.E0));
++#8802=AXIS2_PLACEMENT_3D('',#8799,#8800,#8801);
++#8803=CYLINDRICAL_SURFACE('',#8802,1.925E-1);
++#8804=ORIENTED_EDGE('',*,*,#8780,.T.);
++#8805=ORIENTED_EDGE('',*,*,#8794,.T.);
++#8806=ORIENTED_EDGE('',*,*,#5556,.F.);
++#8807=ORIENTED_EDGE('',*,*,#8791,.F.);
++#8808=EDGE_LOOP('',(#8804,#8805,#8806,#8807));
++#8809=FACE_OUTER_BOUND('',#8808,.F.);
++#8810=ADVANCED_FACE('',(#8809),#8803,.F.);
++#8811=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#8812=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8813=DIRECTION('',(1.E0,0.E0,0.E0));
++#8814=AXIS2_PLACEMENT_3D('',#8811,#8812,#8813);
++#8815=CYLINDRICAL_SURFACE('',#8814,2.575E-1);
++#8816=ORIENTED_EDGE('',*,*,#6452,.T.);
++#8818=ORIENTED_EDGE('',*,*,#8817,.T.);
++#8820=ORIENTED_EDGE('',*,*,#8819,.F.);
++#8822=ORIENTED_EDGE('',*,*,#8821,.F.);
++#8823=EDGE_LOOP('',(#8816,#8818,#8820,#8822));
++#8824=FACE_OUTER_BOUND('',#8823,.F.);
++#8825=ADVANCED_FACE('',(#8824),#8815,.F.);
++#8826=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#8827=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8828=DIRECTION('',(1.E0,0.E0,0.E0));
++#8829=AXIS2_PLACEMENT_3D('',#8826,#8827,#8828);
++#8830=CYLINDRICAL_SURFACE('',#8829,2.575E-1);
++#8831=ORIENTED_EDGE('',*,*,#6454,.T.);
++#8832=ORIENTED_EDGE('',*,*,#8821,.T.);
++#8834=ORIENTED_EDGE('',*,*,#8833,.F.);
++#8835=ORIENTED_EDGE('',*,*,#8817,.F.);
++#8836=EDGE_LOOP('',(#8831,#8832,#8834,#8835));
++#8837=FACE_OUTER_BOUND('',#8836,.F.);
++#8838=ADVANCED_FACE('',(#8837),#8830,.F.);
++#8839=CARTESIAN_POINT('',(6.E0,1.E0,9.E0));
++#8840=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8841=DIRECTION('',(1.E0,0.E0,0.E0));
++#8842=AXIS2_PLACEMENT_3D('',#8839,#8840,#8841);
++#8843=PLANE('',#8842);
++#8844=ORIENTED_EDGE('',*,*,#8819,.T.);
++#8845=ORIENTED_EDGE('',*,*,#8833,.T.);
++#8846=EDGE_LOOP('',(#8844,#8845));
++#8847=FACE_OUTER_BOUND('',#8846,.F.);
++#8849=ORIENTED_EDGE('',*,*,#8848,.F.);
++#8851=ORIENTED_EDGE('',*,*,#8850,.F.);
++#8852=EDGE_LOOP('',(#8849,#8851));
++#8853=FACE_BOUND('',#8852,.F.);
++#8854=ADVANCED_FACE('',(#8847,#8853),#8843,.F.);
++#8855=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#8856=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8857=DIRECTION('',(1.E0,0.E0,0.E0));
++#8858=AXIS2_PLACEMENT_3D('',#8855,#8856,#8857);
++#8859=CYLINDRICAL_SURFACE('',#8858,1.925E-1);
++#8860=ORIENTED_EDGE('',*,*,#8848,.T.);
++#8862=ORIENTED_EDGE('',*,*,#8861,.T.);
++#8863=ORIENTED_EDGE('',*,*,#5690,.F.);
++#8865=ORIENTED_EDGE('',*,*,#8864,.F.);
++#8866=EDGE_LOOP('',(#8860,#8862,#8863,#8865));
++#8867=FACE_OUTER_BOUND('',#8866,.F.);
++#8868=ADVANCED_FACE('',(#8867),#8859,.F.);
++#8869=CARTESIAN_POINT('',(6.E0,1.5E0,9.E0));
++#8870=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8871=DIRECTION('',(1.E0,0.E0,0.E0));
++#8872=AXIS2_PLACEMENT_3D('',#8869,#8870,#8871);
++#8873=CYLINDRICAL_SURFACE('',#8872,1.925E-1);
++#8874=ORIENTED_EDGE('',*,*,#8850,.T.);
++#8875=ORIENTED_EDGE('',*,*,#8864,.T.);
++#8876=ORIENTED_EDGE('',*,*,#5692,.F.);
++#8877=ORIENTED_EDGE('',*,*,#8861,.F.);
++#8878=EDGE_LOOP('',(#8874,#8875,#8876,#8877));
++#8879=FACE_OUTER_BOUND('',#8878,.F.);
++#8880=ADVANCED_FACE('',(#8879),#8873,.F.);
++#8881=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#8882=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8883=DIRECTION('',(1.E0,0.E0,0.E0));
++#8884=AXIS2_PLACEMENT_3D('',#8881,#8882,#8883);
++#8885=CYLINDRICAL_SURFACE('',#8884,2.575E-1);
++#8886=ORIENTED_EDGE('',*,*,#6458,.T.);
++#8888=ORIENTED_EDGE('',*,*,#8887,.T.);
++#8890=ORIENTED_EDGE('',*,*,#8889,.F.);
++#8892=ORIENTED_EDGE('',*,*,#8891,.F.);
++#8893=EDGE_LOOP('',(#8886,#8888,#8890,#8892));
++#8894=FACE_OUTER_BOUND('',#8893,.F.);
++#8895=ADVANCED_FACE('',(#8894),#8885,.F.);
++#8896=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#8897=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8898=DIRECTION('',(1.E0,0.E0,0.E0));
++#8899=AXIS2_PLACEMENT_3D('',#8896,#8897,#8898);
++#8900=CYLINDRICAL_SURFACE('',#8899,2.575E-1);
++#8901=ORIENTED_EDGE('',*,*,#6460,.T.);
++#8902=ORIENTED_EDGE('',*,*,#8891,.T.);
++#8904=ORIENTED_EDGE('',*,*,#8903,.F.);
++#8905=ORIENTED_EDGE('',*,*,#8887,.F.);
++#8906=EDGE_LOOP('',(#8901,#8902,#8904,#8905));
++#8907=FACE_OUTER_BOUND('',#8906,.F.);
++#8908=ADVANCED_FACE('',(#8907),#8900,.F.);
++#8909=CARTESIAN_POINT('',(1.2E1,1.E0,9.E0));
++#8910=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8911=DIRECTION('',(1.E0,0.E0,0.E0));
++#8912=AXIS2_PLACEMENT_3D('',#8909,#8910,#8911);
++#8913=PLANE('',#8912);
++#8914=ORIENTED_EDGE('',*,*,#8889,.T.);
++#8915=ORIENTED_EDGE('',*,*,#8903,.T.);
++#8916=EDGE_LOOP('',(#8914,#8915));
++#8917=FACE_OUTER_BOUND('',#8916,.F.);
++#8919=ORIENTED_EDGE('',*,*,#8918,.F.);
++#8921=ORIENTED_EDGE('',*,*,#8920,.F.);
++#8922=EDGE_LOOP('',(#8919,#8921));
++#8923=FACE_BOUND('',#8922,.F.);
++#8924=ADVANCED_FACE('',(#8917,#8923),#8913,.F.);
++#8925=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#8926=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8927=DIRECTION('',(1.E0,0.E0,0.E0));
++#8928=AXIS2_PLACEMENT_3D('',#8925,#8926,#8927);
++#8929=CYLINDRICAL_SURFACE('',#8928,1.925E-1);
++#8930=ORIENTED_EDGE('',*,*,#8918,.T.);
++#8932=ORIENTED_EDGE('',*,*,#8931,.T.);
++#8933=ORIENTED_EDGE('',*,*,#5696,.F.);
++#8935=ORIENTED_EDGE('',*,*,#8934,.F.);
++#8936=EDGE_LOOP('',(#8930,#8932,#8933,#8935));
++#8937=FACE_OUTER_BOUND('',#8936,.F.);
++#8938=ADVANCED_FACE('',(#8937),#8929,.F.);
++#8939=CARTESIAN_POINT('',(1.2E1,1.5E0,9.E0));
++#8940=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8941=DIRECTION('',(1.E0,0.E0,0.E0));
++#8942=AXIS2_PLACEMENT_3D('',#8939,#8940,#8941);
++#8943=CYLINDRICAL_SURFACE('',#8942,1.925E-1);
++#8944=ORIENTED_EDGE('',*,*,#8920,.T.);
++#8945=ORIENTED_EDGE('',*,*,#8934,.T.);
++#8946=ORIENTED_EDGE('',*,*,#5698,.F.);
++#8947=ORIENTED_EDGE('',*,*,#8931,.F.);
++#8948=EDGE_LOOP('',(#8944,#8945,#8946,#8947));
++#8949=FACE_OUTER_BOUND('',#8948,.F.);
++#8950=ADVANCED_FACE('',(#8949),#8943,.F.);
++#8951=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#8952=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8953=DIRECTION('',(1.E0,0.E0,0.E0));
++#8954=AXIS2_PLACEMENT_3D('',#8951,#8952,#8953);
++#8955=CYLINDRICAL_SURFACE('',#8954,2.575E-1);
++#8956=ORIENTED_EDGE('',*,*,#6464,.T.);
++#8958=ORIENTED_EDGE('',*,*,#8957,.T.);
++#8960=ORIENTED_EDGE('',*,*,#8959,.F.);
++#8962=ORIENTED_EDGE('',*,*,#8961,.F.);
++#8963=EDGE_LOOP('',(#8956,#8958,#8960,#8962));
++#8964=FACE_OUTER_BOUND('',#8963,.F.);
++#8965=ADVANCED_FACE('',(#8964),#8955,.F.);
++#8966=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#8967=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8968=DIRECTION('',(1.E0,0.E0,0.E0));
++#8969=AXIS2_PLACEMENT_3D('',#8966,#8967,#8968);
++#8970=CYLINDRICAL_SURFACE('',#8969,2.575E-1);
++#8971=ORIENTED_EDGE('',*,*,#6466,.T.);
++#8972=ORIENTED_EDGE('',*,*,#8961,.T.);
++#8974=ORIENTED_EDGE('',*,*,#8973,.F.);
++#8975=ORIENTED_EDGE('',*,*,#8957,.F.);
++#8976=EDGE_LOOP('',(#8971,#8972,#8974,#8975));
++#8977=FACE_OUTER_BOUND('',#8976,.F.);
++#8978=ADVANCED_FACE('',(#8977),#8970,.F.);
++#8979=CARTESIAN_POINT('',(1.8E1,1.E0,9.E0));
++#8980=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8981=DIRECTION('',(1.E0,0.E0,0.E0));
++#8982=AXIS2_PLACEMENT_3D('',#8979,#8980,#8981);
++#8983=PLANE('',#8982);
++#8984=ORIENTED_EDGE('',*,*,#8959,.T.);
++#8985=ORIENTED_EDGE('',*,*,#8973,.T.);
++#8986=EDGE_LOOP('',(#8984,#8985));
++#8987=FACE_OUTER_BOUND('',#8986,.F.);
++#8989=ORIENTED_EDGE('',*,*,#8988,.F.);
++#8991=ORIENTED_EDGE('',*,*,#8990,.F.);
++#8992=EDGE_LOOP('',(#8989,#8991));
++#8993=FACE_BOUND('',#8992,.F.);
++#8994=ADVANCED_FACE('',(#8987,#8993),#8983,.F.);
++#8995=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#8996=DIRECTION('',(0.E0,-1.E0,0.E0));
++#8997=DIRECTION('',(1.E0,0.E0,0.E0));
++#8998=AXIS2_PLACEMENT_3D('',#8995,#8996,#8997);
++#8999=CYLINDRICAL_SURFACE('',#8998,1.925E-1);
++#9000=ORIENTED_EDGE('',*,*,#8988,.T.);
++#9002=ORIENTED_EDGE('',*,*,#9001,.T.);
++#9003=ORIENTED_EDGE('',*,*,#5702,.F.);
++#9005=ORIENTED_EDGE('',*,*,#9004,.F.);
++#9006=EDGE_LOOP('',(#9000,#9002,#9003,#9005));
++#9007=FACE_OUTER_BOUND('',#9006,.F.);
++#9008=ADVANCED_FACE('',(#9007),#8999,.F.);
++#9009=CARTESIAN_POINT('',(1.8E1,1.5E0,9.E0));
++#9010=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9011=DIRECTION('',(1.E0,0.E0,0.E0));
++#9012=AXIS2_PLACEMENT_3D('',#9009,#9010,#9011);
++#9013=CYLINDRICAL_SURFACE('',#9012,1.925E-1);
++#9014=ORIENTED_EDGE('',*,*,#8990,.T.);
++#9015=ORIENTED_EDGE('',*,*,#9004,.T.);
++#9016=ORIENTED_EDGE('',*,*,#5704,.F.);
++#9017=ORIENTED_EDGE('',*,*,#9001,.F.);
++#9018=EDGE_LOOP('',(#9014,#9015,#9016,#9017));
++#9019=FACE_OUTER_BOUND('',#9018,.F.);
++#9020=ADVANCED_FACE('',(#9019),#9013,.F.);
++#9021=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#9022=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9023=DIRECTION('',(1.E0,0.E0,0.E0));
++#9024=AXIS2_PLACEMENT_3D('',#9021,#9022,#9023);
++#9025=CYLINDRICAL_SURFACE('',#9024,2.575E-1);
++#9026=ORIENTED_EDGE('',*,*,#6470,.T.);
++#9028=ORIENTED_EDGE('',*,*,#9027,.T.);
++#9030=ORIENTED_EDGE('',*,*,#9029,.F.);
++#9032=ORIENTED_EDGE('',*,*,#9031,.F.);
++#9033=EDGE_LOOP('',(#9026,#9028,#9030,#9032));
++#9034=FACE_OUTER_BOUND('',#9033,.F.);
++#9035=ADVANCED_FACE('',(#9034),#9025,.F.);
++#9036=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#9037=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9038=DIRECTION('',(1.E0,0.E0,0.E0));
++#9039=AXIS2_PLACEMENT_3D('',#9036,#9037,#9038);
++#9040=CYLINDRICAL_SURFACE('',#9039,2.575E-1);
++#9041=ORIENTED_EDGE('',*,*,#6472,.T.);
++#9042=ORIENTED_EDGE('',*,*,#9031,.T.);
++#9044=ORIENTED_EDGE('',*,*,#9043,.F.);
++#9045=ORIENTED_EDGE('',*,*,#9027,.F.);
++#9046=EDGE_LOOP('',(#9041,#9042,#9044,#9045));
++#9047=FACE_OUTER_BOUND('',#9046,.F.);
++#9048=ADVANCED_FACE('',(#9047),#9040,.F.);
++#9049=CARTESIAN_POINT('',(6.E0,1.E0,1.8E1));
++#9050=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9051=DIRECTION('',(1.E0,0.E0,0.E0));
++#9052=AXIS2_PLACEMENT_3D('',#9049,#9050,#9051);
++#9053=PLANE('',#9052);
++#9054=ORIENTED_EDGE('',*,*,#9029,.T.);
++#9055=ORIENTED_EDGE('',*,*,#9043,.T.);
++#9056=EDGE_LOOP('',(#9054,#9055));
++#9057=FACE_OUTER_BOUND('',#9056,.F.);
++#9059=ORIENTED_EDGE('',*,*,#9058,.F.);
++#9061=ORIENTED_EDGE('',*,*,#9060,.F.);
++#9062=EDGE_LOOP('',(#9059,#9061));
++#9063=FACE_BOUND('',#9062,.F.);
++#9064=ADVANCED_FACE('',(#9057,#9063),#9053,.F.);
++#9065=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#9066=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9067=DIRECTION('',(1.E0,0.E0,0.E0));
++#9068=AXIS2_PLACEMENT_3D('',#9065,#9066,#9067);
++#9069=CYLINDRICAL_SURFACE('',#9068,1.925E-1);
++#9070=ORIENTED_EDGE('',*,*,#9058,.T.);
++#9072=ORIENTED_EDGE('',*,*,#9071,.T.);
++#9073=ORIENTED_EDGE('',*,*,#5708,.F.);
++#9075=ORIENTED_EDGE('',*,*,#9074,.F.);
++#9076=EDGE_LOOP('',(#9070,#9072,#9073,#9075));
++#9077=FACE_OUTER_BOUND('',#9076,.F.);
++#9078=ADVANCED_FACE('',(#9077),#9069,.F.);
++#9079=CARTESIAN_POINT('',(6.E0,1.5E0,1.8E1));
++#9080=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9081=DIRECTION('',(1.E0,0.E0,0.E0));
++#9082=AXIS2_PLACEMENT_3D('',#9079,#9080,#9081);
++#9083=CYLINDRICAL_SURFACE('',#9082,1.925E-1);
++#9084=ORIENTED_EDGE('',*,*,#9060,.T.);
++#9085=ORIENTED_EDGE('',*,*,#9074,.T.);
++#9086=ORIENTED_EDGE('',*,*,#5710,.F.);
++#9087=ORIENTED_EDGE('',*,*,#9071,.F.);
++#9088=EDGE_LOOP('',(#9084,#9085,#9086,#9087));
++#9089=FACE_OUTER_BOUND('',#9088,.F.);
++#9090=ADVANCED_FACE('',(#9089),#9083,.F.);
++#9091=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#9092=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9093=DIRECTION('',(1.E0,0.E0,0.E0));
++#9094=AXIS2_PLACEMENT_3D('',#9091,#9092,#9093);
++#9095=CYLINDRICAL_SURFACE('',#9094,2.575E-1);
++#9096=ORIENTED_EDGE('',*,*,#6476,.T.);
++#9098=ORIENTED_EDGE('',*,*,#9097,.T.);
++#9100=ORIENTED_EDGE('',*,*,#9099,.F.);
++#9102=ORIENTED_EDGE('',*,*,#9101,.F.);
++#9103=EDGE_LOOP('',(#9096,#9098,#9100,#9102));
++#9104=FACE_OUTER_BOUND('',#9103,.F.);
++#9105=ADVANCED_FACE('',(#9104),#9095,.F.);
++#9106=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#9107=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9108=DIRECTION('',(1.E0,0.E0,0.E0));
++#9109=AXIS2_PLACEMENT_3D('',#9106,#9107,#9108);
++#9110=CYLINDRICAL_SURFACE('',#9109,2.575E-1);
++#9111=ORIENTED_EDGE('',*,*,#6478,.T.);
++#9112=ORIENTED_EDGE('',*,*,#9101,.T.);
++#9114=ORIENTED_EDGE('',*,*,#9113,.F.);
++#9115=ORIENTED_EDGE('',*,*,#9097,.F.);
++#9116=EDGE_LOOP('',(#9111,#9112,#9114,#9115));
++#9117=FACE_OUTER_BOUND('',#9116,.F.);
++#9118=ADVANCED_FACE('',(#9117),#9110,.F.);
++#9119=CARTESIAN_POINT('',(1.2E1,1.E0,1.8E1));
++#9120=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9121=DIRECTION('',(1.E0,0.E0,0.E0));
++#9122=AXIS2_PLACEMENT_3D('',#9119,#9120,#9121);
++#9123=PLANE('',#9122);
++#9124=ORIENTED_EDGE('',*,*,#9099,.T.);
++#9125=ORIENTED_EDGE('',*,*,#9113,.T.);
++#9126=EDGE_LOOP('',(#9124,#9125));
++#9127=FACE_OUTER_BOUND('',#9126,.F.);
++#9129=ORIENTED_EDGE('',*,*,#9128,.F.);
++#9131=ORIENTED_EDGE('',*,*,#9130,.F.);
++#9132=EDGE_LOOP('',(#9129,#9131));
++#9133=FACE_BOUND('',#9132,.F.);
++#9134=ADVANCED_FACE('',(#9127,#9133),#9123,.F.);
++#9135=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#9136=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9137=DIRECTION('',(1.E0,0.E0,0.E0));
++#9138=AXIS2_PLACEMENT_3D('',#9135,#9136,#9137);
++#9139=CYLINDRICAL_SURFACE('',#9138,1.925E-1);
++#9140=ORIENTED_EDGE('',*,*,#9128,.T.);
++#9142=ORIENTED_EDGE('',*,*,#9141,.T.);
++#9143=ORIENTED_EDGE('',*,*,#5714,.F.);
++#9145=ORIENTED_EDGE('',*,*,#9144,.F.);
++#9146=EDGE_LOOP('',(#9140,#9142,#9143,#9145));
++#9147=FACE_OUTER_BOUND('',#9146,.F.);
++#9148=ADVANCED_FACE('',(#9147),#9139,.F.);
++#9149=CARTESIAN_POINT('',(1.2E1,1.5E0,1.8E1));
++#9150=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9151=DIRECTION('',(1.E0,0.E0,0.E0));
++#9152=AXIS2_PLACEMENT_3D('',#9149,#9150,#9151);
++#9153=CYLINDRICAL_SURFACE('',#9152,1.925E-1);
++#9154=ORIENTED_EDGE('',*,*,#9130,.T.);
++#9155=ORIENTED_EDGE('',*,*,#9144,.T.);
++#9156=ORIENTED_EDGE('',*,*,#5716,.F.);
++#9157=ORIENTED_EDGE('',*,*,#9141,.F.);
++#9158=EDGE_LOOP('',(#9154,#9155,#9156,#9157));
++#9159=FACE_OUTER_BOUND('',#9158,.F.);
++#9160=ADVANCED_FACE('',(#9159),#9153,.F.);
++#9161=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#9162=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9163=DIRECTION('',(1.E0,0.E0,0.E0));
++#9164=AXIS2_PLACEMENT_3D('',#9161,#9162,#9163);
++#9165=CYLINDRICAL_SURFACE('',#9164,2.575E-1);
++#9166=ORIENTED_EDGE('',*,*,#6482,.T.);
++#9168=ORIENTED_EDGE('',*,*,#9167,.T.);
++#9170=ORIENTED_EDGE('',*,*,#9169,.F.);
++#9172=ORIENTED_EDGE('',*,*,#9171,.F.);
++#9173=EDGE_LOOP('',(#9166,#9168,#9170,#9172));
++#9174=FACE_OUTER_BOUND('',#9173,.F.);
++#9175=ADVANCED_FACE('',(#9174),#9165,.F.);
++#9176=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#9177=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9178=DIRECTION('',(1.E0,0.E0,0.E0));
++#9179=AXIS2_PLACEMENT_3D('',#9176,#9177,#9178);
++#9180=CYLINDRICAL_SURFACE('',#9179,2.575E-1);
++#9181=ORIENTED_EDGE('',*,*,#6484,.T.);
++#9182=ORIENTED_EDGE('',*,*,#9171,.T.);
++#9184=ORIENTED_EDGE('',*,*,#9183,.F.);
++#9185=ORIENTED_EDGE('',*,*,#9167,.F.);
++#9186=EDGE_LOOP('',(#9181,#9182,#9184,#9185));
++#9187=FACE_OUTER_BOUND('',#9186,.F.);
++#9188=ADVANCED_FACE('',(#9187),#9180,.F.);
++#9189=CARTESIAN_POINT('',(1.8E1,1.E0,1.8E1));
++#9190=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9191=DIRECTION('',(1.E0,0.E0,0.E0));
++#9192=AXIS2_PLACEMENT_3D('',#9189,#9190,#9191);
++#9193=PLANE('',#9192);
++#9194=ORIENTED_EDGE('',*,*,#9169,.T.);
++#9195=ORIENTED_EDGE('',*,*,#9183,.T.);
++#9196=EDGE_LOOP('',(#9194,#9195));
++#9197=FACE_OUTER_BOUND('',#9196,.F.);
++#9199=ORIENTED_EDGE('',*,*,#9198,.F.);
++#9201=ORIENTED_EDGE('',*,*,#9200,.F.);
++#9202=EDGE_LOOP('',(#9199,#9201));
++#9203=FACE_BOUND('',#9202,.F.);
++#9204=ADVANCED_FACE('',(#9197,#9203),#9193,.F.);
++#9205=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#9206=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9207=DIRECTION('',(1.E0,0.E0,0.E0));
++#9208=AXIS2_PLACEMENT_3D('',#9205,#9206,#9207);
++#9209=CYLINDRICAL_SURFACE('',#9208,1.925E-1);
++#9210=ORIENTED_EDGE('',*,*,#9198,.T.);
++#9212=ORIENTED_EDGE('',*,*,#9211,.T.);
++#9213=ORIENTED_EDGE('',*,*,#5720,.F.);
++#9215=ORIENTED_EDGE('',*,*,#9214,.F.);
++#9216=EDGE_LOOP('',(#9210,#9212,#9213,#9215));
++#9217=FACE_OUTER_BOUND('',#9216,.F.);
++#9218=ADVANCED_FACE('',(#9217),#9209,.F.);
++#9219=CARTESIAN_POINT('',(1.8E1,1.5E0,1.8E1));
++#9220=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9221=DIRECTION('',(1.E0,0.E0,0.E0));
++#9222=AXIS2_PLACEMENT_3D('',#9219,#9220,#9221);
++#9223=CYLINDRICAL_SURFACE('',#9222,1.925E-1);
++#9224=ORIENTED_EDGE('',*,*,#9200,.T.);
++#9225=ORIENTED_EDGE('',*,*,#9214,.T.);
++#9226=ORIENTED_EDGE('',*,*,#5722,.F.);
++#9227=ORIENTED_EDGE('',*,*,#9211,.F.);
++#9228=EDGE_LOOP('',(#9224,#9225,#9226,#9227));
++#9229=FACE_OUTER_BOUND('',#9228,.F.);
++#9230=ADVANCED_FACE('',(#9229),#9223,.F.);
++#9231=CARTESIAN_POINT('',(2.2E1,1.5E0,1.2E1));
++#9232=DIRECTION('',(1.E0,0.E0,0.E0));
++#9233=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9234=AXIS2_PLACEMENT_3D('',#9231,#9232,#9233);
++#9235=PLANE('',#9234);
++#9236=ORIENTED_EDGE('',*,*,#6328,.T.);
++#9237=ORIENTED_EDGE('',*,*,#6155,.T.);
++#9239=ORIENTED_EDGE('',*,*,#9238,.T.);
++#9240=EDGE_LOOP('',(#9236,#9237,#9239));
++#9241=FACE_OUTER_BOUND('',#9240,.F.);
++#9242=ADVANCED_FACE('',(#9241),#9235,.F.);
++#9243=CARTESIAN_POINT('',(2.375E1,6.5E0,1.E1));
++#9244=DIRECTION('',(0.E0,-5.E-1,-8.660254037844E-1));
++#9245=DIRECTION('',(0.E0,-8.660254037844E-1,5.E-1));
++#9246=AXIS2_PLACEMENT_3D('',#9243,#9244,#9245);
++#9247=PLANE('',#9246);
++#9248=ORIENTED_EDGE('',*,*,#6330,.T.);
++#9249=ORIENTED_EDGE('',*,*,#9238,.F.);
++#9250=ORIENTED_EDGE('',*,*,#6153,.F.);
++#9251=ORIENTED_EDGE('',*,*,#6209,.T.);
++#9252=EDGE_LOOP('',(#9248,#9249,#9250,#9251));
++#9253=FACE_OUTER_BOUND('',#9252,.F.);
++#9255=ORIENTED_EDGE('',*,*,#9254,.F.);
++#9257=ORIENTED_EDGE('',*,*,#9256,.F.);
++#9258=EDGE_LOOP('',(#9255,#9257));
++#9259=FACE_BOUND('',#9258,.F.);
++#9260=ADVANCED_FACE('',(#9253,#9259),#9247,.F.);
++#9261=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));
++#9262=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9263=DIRECTION('',(1.E0,0.E0,0.E0));
++#9264=AXIS2_PLACEMENT_3D('',#9261,#9262,#9263);
++#9265=CYLINDRICAL_SURFACE('',#9264,2.575E-1);
++#9267=ORIENTED_EDGE('',*,*,#9266,.F.);
++#9268=ORIENTED_EDGE('',*,*,#9254,.T.);
++#9270=ORIENTED_EDGE('',*,*,#9269,.F.);
++#9272=ORIENTED_EDGE('',*,*,#9271,.F.);
++#9273=EDGE_LOOP('',(#9267,#9268,#9270,#9272));
++#9274=FACE_OUTER_BOUND('',#9273,.F.);
++#9275=ADVANCED_FACE('',(#9274),#9265,.F.);
++#9276=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));
++#9277=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9278=DIRECTION('',(1.E0,0.E0,0.E0));
++#9279=AXIS2_PLACEMENT_3D('',#9276,#9277,#9278);
++#9280=CYLINDRICAL_SURFACE('',#9279,2.575E-1);
++#9281=ORIENTED_EDGE('',*,*,#9269,.T.);
++#9282=ORIENTED_EDGE('',*,*,#9256,.T.);
++#9283=ORIENTED_EDGE('',*,*,#9266,.T.);
++#9285=ORIENTED_EDGE('',*,*,#9284,.F.);
++#9286=EDGE_LOOP('',(#9281,#9282,#9283,#9285));
++#9287=FACE_OUTER_BOUND('',#9286,.F.);
++#9288=ADVANCED_FACE('',(#9287),#9280,.F.);
++#9289=CARTESIAN_POINT('',(2.2875E1,1.E0,1.2E1));
++#9290=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9291=DIRECTION('',(1.E0,0.E0,0.E0));
++#9292=AXIS2_PLACEMENT_3D('',#9289,#9290,#9291);
++#9293=PLANE('',#9292);
++#9294=ORIENTED_EDGE('',*,*,#9271,.T.);
++#9295=ORIENTED_EDGE('',*,*,#9284,.T.);
++#9296=EDGE_LOOP('',(#9294,#9295));
++#9297=FACE_OUTER_BOUND('',#9296,.F.);
++#9299=ORIENTED_EDGE('',*,*,#9298,.F.);
++#9301=ORIENTED_EDGE('',*,*,#9300,.F.);
++#9302=EDGE_LOOP('',(#9299,#9301));
++#9303=FACE_BOUND('',#9302,.F.);
++#9304=ADVANCED_FACE('',(#9297,#9303),#9293,.F.);
++#9305=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));
++#9306=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9307=DIRECTION('',(1.E0,0.E0,0.E0));
++#9308=AXIS2_PLACEMENT_3D('',#9305,#9306,#9307);
++#9309=CYLINDRICAL_SURFACE('',#9308,1.925E-1);
++#9310=ORIENTED_EDGE('',*,*,#9298,.T.);
++#9312=ORIENTED_EDGE('',*,*,#9311,.T.);
++#9313=ORIENTED_EDGE('',*,*,#5596,.F.);
++#9315=ORIENTED_EDGE('',*,*,#9314,.F.);
++#9316=EDGE_LOOP('',(#9310,#9312,#9313,#9315));
++#9317=FACE_OUTER_BOUND('',#9316,.F.);
++#9318=ADVANCED_FACE('',(#9317),#9309,.F.);
++#9319=CARTESIAN_POINT('',(2.2875E1,1.5E0,1.2E1));
++#9320=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9321=DIRECTION('',(1.E0,0.E0,0.E0));
++#9322=AXIS2_PLACEMENT_3D('',#9319,#9320,#9321);
++#9323=CYLINDRICAL_SURFACE('',#9322,1.925E-1);
++#9324=ORIENTED_EDGE('',*,*,#9300,.T.);
++#9325=ORIENTED_EDGE('',*,*,#9314,.T.);
++#9326=ORIENTED_EDGE('',*,*,#5598,.F.);
++#9327=ORIENTED_EDGE('',*,*,#9311,.F.);
++#9328=EDGE_LOOP('',(#9324,#9325,#9326,#9327));
++#9329=FACE_OUTER_BOUND('',#9328,.F.);
++#9330=ADVANCED_FACE('',(#9329),#9323,.F.);
++#9331=CARTESIAN_POINT('',(2.185E1,6.65E0,1.006892397423E1));
++#9332=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9333=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9334=AXIS2_PLACEMENT_3D('',#9331,#9332,#9333);
++#9335=CYLINDRICAL_SURFACE('',#9334,3.5E-1);
++#9337=ORIENTED_EDGE('',*,*,#9336,.T.);
++#9339=ORIENTED_EDGE('',*,*,#9338,.T.);
++#9341=ORIENTED_EDGE('',*,*,#9340,.F.);
++#9342=ORIENTED_EDGE('',*,*,#6175,.T.);
++#9343=EDGE_LOOP('',(#9337,#9339,#9341,#9342));
++#9344=FACE_OUTER_BOUND('',#9343,.F.);
++#9345=ADVANCED_FACE('',(#9344),#9335,.T.);
++#9346=CARTESIAN_POINT('',(2.15E1,7.E0,1.E1));
++#9347=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9348=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9349=AXIS2_PLACEMENT_3D('',#9346,#9347,#9348);
++#9350=PLANE('',#9349);
++#9351=ORIENTED_EDGE('',*,*,#9336,.F.);
++#9352=ORIENTED_EDGE('',*,*,#6197,.T.);
++#9354=ORIENTED_EDGE('',*,*,#9353,.F.);
++#9356=ORIENTED_EDGE('',*,*,#9355,.F.);
++#9357=EDGE_LOOP('',(#9351,#9352,#9354,#9356));
++#9358=FACE_OUTER_BOUND('',#9357,.F.);
++#9359=ADVANCED_FACE('',(#9358),#9350,.T.);
++#9360=CARTESIAN_POINT('',(2.115E1,2.35E0,9.441108058217E0));
++#9361=DIRECTION('',(0.E0,0.E0,1.E0));
++#9362=DIRECTION('',(1.015061051086E-14,-1.E0,0.E0));
++#9363=AXIS2_PLACEMENT_3D('',#9360,#9361,#9362);
++#9364=CYLINDRICAL_SURFACE('',#9363,3.5E-1);
++#9366=ORIENTED_EDGE('',*,*,#9365,.F.);
++#9368=ORIENTED_EDGE('',*,*,#9367,.T.);
++#9369=ORIENTED_EDGE('',*,*,#9353,.T.);
++#9370=ORIENTED_EDGE('',*,*,#6195,.T.);
++#9371=EDGE_LOOP('',(#9366,#9368,#9369,#9370));
++#9372=FACE_OUTER_BOUND('',#9371,.F.);
++#9373=ADVANCED_FACE('',(#9372),#9364,.F.);
++#9374=CARTESIAN_POINT('',(2.15E1,2.E0,1.E1));
++#9375=DIRECTION('',(0.E0,1.E0,0.E0));
++#9376=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9377=AXIS2_PLACEMENT_3D('',#9374,#9375,#9376);
++#9378=PLANE('',#9377);
++#9379=ORIENTED_EDGE('',*,*,#9365,.T.);
++#9380=ORIENTED_EDGE('',*,*,#6193,.T.);
++#9382=ORIENTED_EDGE('',*,*,#9381,.F.);
++#9384=ORIENTED_EDGE('',*,*,#9383,.F.);
++#9385=EDGE_LOOP('',(#9379,#9380,#9382,#9384));
++#9386=FACE_OUTER_BOUND('',#9385,.F.);
++#9387=ADVANCED_FACE('',(#9386),#9378,.T.);
++#9388=CARTESIAN_POINT('',(1.985E1,2.35E0,9.441108058217E0));
++#9389=DIRECTION('',(0.E0,0.E0,1.E0));
++#9390=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9391=AXIS2_PLACEMENT_3D('',#9388,#9389,#9390);
++#9392=CYLINDRICAL_SURFACE('',#9391,3.5E-1);
++#9394=ORIENTED_EDGE('',*,*,#9393,.F.);
++#9396=ORIENTED_EDGE('',*,*,#9395,.T.);
++#9397=ORIENTED_EDGE('',*,*,#9381,.T.);
++#9398=ORIENTED_EDGE('',*,*,#6191,.T.);
++#9399=EDGE_LOOP('',(#9394,#9396,#9397,#9398));
++#9400=FACE_OUTER_BOUND('',#9399,.F.);
++#9401=ADVANCED_FACE('',(#9400),#9392,.F.);
++#9402=CARTESIAN_POINT('',(1.95E1,2.E0,1.E1));
++#9403=DIRECTION('',(1.E0,0.E0,0.E0));
++#9404=DIRECTION('',(0.E0,1.E0,0.E0));
++#9405=AXIS2_PLACEMENT_3D('',#9402,#9403,#9404);
++#9406=PLANE('',#9405);
++#9407=ORIENTED_EDGE('',*,*,#9393,.T.);
++#9408=ORIENTED_EDGE('',*,*,#6189,.T.);
++#9410=ORIENTED_EDGE('',*,*,#9409,.F.);
++#9412=ORIENTED_EDGE('',*,*,#9411,.F.);
++#9413=EDGE_LOOP('',(#9407,#9408,#9410,#9412));
++#9414=FACE_OUTER_BOUND('',#9413,.F.);
++#9415=ADVANCED_FACE('',(#9414),#9406,.T.);
++#9416=CARTESIAN_POINT('',(1.985E1,9.15E0,9.441108058217E0));
++#9417=DIRECTION('',(0.E0,0.E0,1.E0));
++#9418=DIRECTION('',(-1.015061051086E-14,1.E0,0.E0));
++#9419=AXIS2_PLACEMENT_3D('',#9416,#9417,#9418);
++#9420=CYLINDRICAL_SURFACE('',#9419,3.5E-1);
++#9422=ORIENTED_EDGE('',*,*,#9421,.F.);
++#9424=ORIENTED_EDGE('',*,*,#9423,.T.);
++#9425=ORIENTED_EDGE('',*,*,#9409,.T.);
++#9426=ORIENTED_EDGE('',*,*,#6187,.T.);
++#9427=EDGE_LOOP('',(#9422,#9424,#9425,#9426));
++#9428=FACE_OUTER_BOUND('',#9427,.F.);
++#9429=ADVANCED_FACE('',(#9428),#9420,.F.);
++#9430=CARTESIAN_POINT('',(1.95E1,9.5E0,1.E1));
++#9431=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9432=DIRECTION('',(1.E0,0.E0,0.E0));
++#9433=AXIS2_PLACEMENT_3D('',#9430,#9431,#9432);
++#9434=PLANE('',#9433);
++#9436=ORIENTED_EDGE('',*,*,#9435,.F.);
++#9438=ORIENTED_EDGE('',*,*,#9437,.F.);
++#9439=ORIENTED_EDGE('',*,*,#9421,.T.);
++#9440=ORIENTED_EDGE('',*,*,#6185,.T.);
++#9441=EDGE_LOOP('',(#9436,#9438,#9439,#9440));
++#9442=FACE_OUTER_BOUND('',#9441,.F.);
++#9443=ADVANCED_FACE('',(#9442),#9434,.T.);
++#9444=CARTESIAN_POINT('',(2.104720076055E1,9.15E0,9.441108058217E0));
++#9445=DIRECTION('',(0.E0,0.E0,1.E0));
++#9446=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#9447=AXIS2_PLACEMENT_3D('',#9444,#9445,#9446);
++#9448=CYLINDRICAL_SURFACE('',#9447,3.5E-1);
++#9450=ORIENTED_EDGE('',*,*,#9449,.F.);
++#9452=ORIENTED_EDGE('',*,*,#9451,.T.);
++#9453=ORIENTED_EDGE('',*,*,#9435,.T.);
++#9454=ORIENTED_EDGE('',*,*,#6183,.T.);
++#9455=EDGE_LOOP('',(#9450,#9452,#9453,#9454));
++#9456=FACE_OUTER_BOUND('',#9455,.F.);
++#9457=ADVANCED_FACE('',(#9456),#9448,.F.);
++#9458=CARTESIAN_POINT('',(2.125314193270E1,9.5E0,1.E1));
++#9459=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));
++#9460=DIRECTION('',(4.856429311786E-1,-8.741572761215E-1,0.E0));
++#9461=AXIS2_PLACEMENT_3D('',#9458,#9459,#9460);
++#9462=PLANE('',#9461);
++#9464=ORIENTED_EDGE('',*,*,#9463,.F.);
++#9466=ORIENTED_EDGE('',*,*,#9465,.F.);
++#9467=ORIENTED_EDGE('',*,*,#9449,.T.);
++#9468=ORIENTED_EDGE('',*,*,#6181,.T.);
++#9469=EDGE_LOOP('',(#9464,#9466,#9467,#9468));
++#9470=FACE_OUTER_BOUND('',#9469,.F.);
++#9471=ADVANCED_FACE('',(#9470),#9462,.T.);
++#9472=CARTESIAN_POINT('',(2.204720076055E1,7.35E0,9.441108058217E0));
++#9473=DIRECTION('',(0.E0,0.E0,1.E0));
++#9474=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9475=AXIS2_PLACEMENT_3D('',#9472,#9473,#9474);
++#9476=CYLINDRICAL_SURFACE('',#9475,3.5E-1);
++#9478=ORIENTED_EDGE('',*,*,#9477,.F.);
++#9480=ORIENTED_EDGE('',*,*,#9479,.T.);
++#9481=ORIENTED_EDGE('',*,*,#9463,.T.);
++#9482=ORIENTED_EDGE('',*,*,#6179,.T.);
++#9483=EDGE_LOOP('',(#9478,#9480,#9481,#9482));
++#9484=FACE_OUTER_BOUND('',#9483,.F.);
++#9485=ADVANCED_FACE('',(#9484),#9476,.F.);
++#9486=CARTESIAN_POINT('',(2.264203082158E1,7.E0,1.E1));
++#9487=DIRECTION('',(0.E0,1.E0,0.E0));
++#9488=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9489=AXIS2_PLACEMENT_3D('',#9486,#9487,#9488);
++#9490=PLANE('',#9489);
++#9491=ORIENTED_EDGE('',*,*,#9340,.T.);
++#9493=ORIENTED_EDGE('',*,*,#9492,.F.);
++#9494=ORIENTED_EDGE('',*,*,#9477,.T.);
++#9495=ORIENTED_EDGE('',*,*,#6177,.T.);
++#9496=EDGE_LOOP('',(#9491,#9493,#9494,#9495));
++#9497=FACE_OUTER_BOUND('',#9496,.F.);
++#9498=ADVANCED_FACE('',(#9497),#9490,.T.);
++#9499=CARTESIAN_POINT('',(2.4E1,0.E0,9.5E0));
++#9500=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9501=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9502=AXIS2_PLACEMENT_3D('',#9499,#9500,#9501);
++#9503=PLANE('',#9502);
++#9504=ORIENTED_EDGE('',*,*,#9492,.T.);
++#9505=ORIENTED_EDGE('',*,*,#9338,.F.);
++#9506=ORIENTED_EDGE('',*,*,#9355,.T.);
++#9507=ORIENTED_EDGE('',*,*,#9367,.F.);
++#9508=ORIENTED_EDGE('',*,*,#9383,.T.);
++#9509=ORIENTED_EDGE('',*,*,#9395,.F.);
++#9510=ORIENTED_EDGE('',*,*,#9411,.T.);
++#9511=ORIENTED_EDGE('',*,*,#9423,.F.);
++#9512=ORIENTED_EDGE('',*,*,#9437,.T.);
++#9513=ORIENTED_EDGE('',*,*,#9451,.F.);
++#9514=ORIENTED_EDGE('',*,*,#9465,.T.);
++#9515=ORIENTED_EDGE('',*,*,#9479,.F.);
++#9516=EDGE_LOOP('',(#9504,#9505,#9506,#9507,#9508,#9509,#9510,#9511,#9512,#9513,
++#9514,#9515));
++#9517=FACE_OUTER_BOUND('',#9516,.F.);
++#9518=ADVANCED_FACE('',(#9517),#9503,.F.);
++#9519=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));
++#9520=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9521=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9522=AXIS2_PLACEMENT_3D('',#9519,#9520,#9521);
++#9523=CYLINDRICAL_SURFACE('',#9522,9.5E-2);
++#9524=ORIENTED_EDGE('',*,*,#6007,.F.);
++#9526=ORIENTED_EDGE('',*,*,#9525,.T.);
++#9528=ORIENTED_EDGE('',*,*,#9527,.T.);
++#9530=ORIENTED_EDGE('',*,*,#9529,.F.);
++#9531=EDGE_LOOP('',(#9524,#9526,#9528,#9530));
++#9532=FACE_OUTER_BOUND('',#9531,.F.);
++#9533=ADVANCED_FACE('',(#9532),#9523,.F.);
++#9534=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.E0));
++#9535=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9536=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9537=AXIS2_PLACEMENT_3D('',#9534,#9535,#9536);
++#9538=CYLINDRICAL_SURFACE('',#9537,9.5E-2);
++#9539=ORIENTED_EDGE('',*,*,#6009,.F.);
++#9540=ORIENTED_EDGE('',*,*,#9529,.T.);
++#9542=ORIENTED_EDGE('',*,*,#9541,.T.);
++#9543=ORIENTED_EDGE('',*,*,#9525,.F.);
++#9544=EDGE_LOOP('',(#9539,#9540,#9542,#9543));
++#9545=FACE_OUTER_BOUND('',#9544,.F.);
++#9546=ADVANCED_FACE('',(#9545),#9538,.F.);
++#9547=CARTESIAN_POINT('',(2.01875E1,1.05E1,8.25E0));
++#9548=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9549=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9550=AXIS2_PLACEMENT_3D('',#9547,#9548,#9549);
++#9551=PLANE('',#9550);
++#9552=ORIENTED_EDGE('',*,*,#9527,.F.);
++#9553=ORIENTED_EDGE('',*,*,#9541,.F.);
++#9554=EDGE_LOOP('',(#9552,#9553));
++#9555=FACE_OUTER_BOUND('',#9554,.F.);
++#9556=ADVANCED_FACE('',(#9555),#9551,.T.);
++#9557=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));
++#9558=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9559=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9560=AXIS2_PLACEMENT_3D('',#9557,#9558,#9559);
++#9561=CYLINDRICAL_SURFACE('',#9560,9.5E-2);
++#9562=ORIENTED_EDGE('',*,*,#6013,.F.);
++#9564=ORIENTED_EDGE('',*,*,#9563,.T.);
++#9566=ORIENTED_EDGE('',*,*,#9565,.T.);
++#9568=ORIENTED_EDGE('',*,*,#9567,.F.);
++#9569=EDGE_LOOP('',(#9562,#9564,#9566,#9568));
++#9570=FACE_OUTER_BOUND('',#9569,.F.);
++#9571=ADVANCED_FACE('',(#9570),#9561,.F.);
++#9572=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.E0));
++#9573=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9574=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9575=AXIS2_PLACEMENT_3D('',#9572,#9573,#9574);
++#9576=CYLINDRICAL_SURFACE('',#9575,9.5E-2);
++#9577=ORIENTED_EDGE('',*,*,#6015,.F.);
++#9578=ORIENTED_EDGE('',*,*,#9567,.T.);
++#9580=ORIENTED_EDGE('',*,*,#9579,.T.);
++#9581=ORIENTED_EDGE('',*,*,#9563,.F.);
++#9582=EDGE_LOOP('',(#9577,#9578,#9580,#9581));
++#9583=FACE_OUTER_BOUND('',#9582,.F.);
++#9584=ADVANCED_FACE('',(#9583),#9576,.F.);
++#9585=CARTESIAN_POINT('',(1.975E1,1.00625E1,8.25E0));
++#9586=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9587=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9588=AXIS2_PLACEMENT_3D('',#9585,#9586,#9587);
++#9589=PLANE('',#9588);
++#9590=ORIENTED_EDGE('',*,*,#9565,.F.);
++#9591=ORIENTED_EDGE('',*,*,#9579,.F.);
++#9592=EDGE_LOOP('',(#9590,#9591));
++#9593=FACE_OUTER_BOUND('',#9592,.F.);
++#9594=ADVANCED_FACE('',(#9593),#9589,.T.);
++#9595=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));
++#9596=DIRECTION('',(0.E0,0.E0,1.E0));
++#9597=DIRECTION('',(1.E0,0.E0,0.E0));
++#9598=AXIS2_PLACEMENT_3D('',#9595,#9596,#9597);
++#9599=CYLINDRICAL_SURFACE('',#9598,9.5E-2);
++#9600=ORIENTED_EDGE('',*,*,#6019,.T.);
++#9602=ORIENTED_EDGE('',*,*,#9601,.T.);
++#9604=ORIENTED_EDGE('',*,*,#9603,.F.);
++#9606=ORIENTED_EDGE('',*,*,#9605,.F.);
++#9607=EDGE_LOOP('',(#9600,#9602,#9604,#9606));
++#9608=FACE_OUTER_BOUND('',#9607,.F.);
++#9609=ADVANCED_FACE('',(#9608),#9599,.F.);
++#9610=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.E0));
++#9611=DIRECTION('',(0.E0,0.E0,1.E0));
++#9612=DIRECTION('',(1.E0,0.E0,0.E0));
++#9613=AXIS2_PLACEMENT_3D('',#9610,#9611,#9612);
++#9614=CYLINDRICAL_SURFACE('',#9613,9.5E-2);
++#9615=ORIENTED_EDGE('',*,*,#6021,.T.);
++#9616=ORIENTED_EDGE('',*,*,#9605,.T.);
++#9618=ORIENTED_EDGE('',*,*,#9617,.F.);
++#9619=ORIENTED_EDGE('',*,*,#9601,.F.);
++#9620=EDGE_LOOP('',(#9615,#9616,#9618,#9619));
++#9621=FACE_OUTER_BOUND('',#9620,.F.);
++#9622=ADVANCED_FACE('',(#9621),#9614,.F.);
++#9623=CARTESIAN_POINT('',(4.25E0,1.00625E1,8.25E0));
++#9624=DIRECTION('',(0.E0,0.E0,1.E0));
++#9625=DIRECTION('',(1.E0,0.E0,0.E0));
++#9626=AXIS2_PLACEMENT_3D('',#9623,#9624,#9625);
++#9627=PLANE('',#9626);
++#9628=ORIENTED_EDGE('',*,*,#9603,.T.);
++#9629=ORIENTED_EDGE('',*,*,#9617,.T.);
++#9630=EDGE_LOOP('',(#9628,#9629));
++#9631=FACE_OUTER_BOUND('',#9630,.F.);
++#9632=ADVANCED_FACE('',(#9631),#9627,.F.);
++#9633=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));
++#9634=DIRECTION('',(0.E0,0.E0,1.E0));
++#9635=DIRECTION('',(1.E0,0.E0,0.E0));
++#9636=AXIS2_PLACEMENT_3D('',#9633,#9634,#9635);
++#9637=CYLINDRICAL_SURFACE('',#9636,9.5E-2);
++#9638=ORIENTED_EDGE('',*,*,#6025,.T.);
++#9640=ORIENTED_EDGE('',*,*,#9639,.T.);
++#9642=ORIENTED_EDGE('',*,*,#9641,.F.);
++#9644=ORIENTED_EDGE('',*,*,#9643,.F.);
++#9645=EDGE_LOOP('',(#9638,#9640,#9642,#9644));
++#9646=FACE_OUTER_BOUND('',#9645,.F.);
++#9647=ADVANCED_FACE('',(#9646),#9637,.F.);
++#9648=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.E0));
++#9649=DIRECTION('',(0.E0,0.E0,1.E0));
++#9650=DIRECTION('',(1.E0,0.E0,0.E0));
++#9651=AXIS2_PLACEMENT_3D('',#9648,#9649,#9650);
++#9652=CYLINDRICAL_SURFACE('',#9651,9.5E-2);
++#9653=ORIENTED_EDGE('',*,*,#6027,.T.);
++#9654=ORIENTED_EDGE('',*,*,#9643,.T.);
++#9656=ORIENTED_EDGE('',*,*,#9655,.F.);
++#9657=ORIENTED_EDGE('',*,*,#9639,.F.);
++#9658=EDGE_LOOP('',(#9653,#9654,#9656,#9657));
++#9659=FACE_OUTER_BOUND('',#9658,.F.);
++#9660=ADVANCED_FACE('',(#9659),#9652,.F.);
++#9661=CARTESIAN_POINT('',(3.8125E0,1.05E1,8.25E0));
++#9662=DIRECTION('',(0.E0,0.E0,1.E0));
++#9663=DIRECTION('',(1.E0,0.E0,0.E0));
++#9664=AXIS2_PLACEMENT_3D('',#9661,#9662,#9663);
++#9665=PLANE('',#9664);
++#9666=ORIENTED_EDGE('',*,*,#9641,.T.);
++#9667=ORIENTED_EDGE('',*,*,#9655,.T.);
++#9668=EDGE_LOOP('',(#9666,#9667));
++#9669=FACE_OUTER_BOUND('',#9668,.F.);
++#9670=ADVANCED_FACE('',(#9669),#9665,.F.);
++#9671=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));
++#9672=DIRECTION('',(0.E0,0.E0,1.E0));
++#9673=DIRECTION('',(1.E0,0.E0,0.E0));
++#9674=AXIS2_PLACEMENT_3D('',#9671,#9672,#9673);
++#9675=CYLINDRICAL_SURFACE('',#9674,9.5E-2);
++#9676=ORIENTED_EDGE('',*,*,#6037,.T.);
++#9678=ORIENTED_EDGE('',*,*,#9677,.T.);
++#9680=ORIENTED_EDGE('',*,*,#9679,.F.);
++#9682=ORIENTED_EDGE('',*,*,#9681,.F.);
++#9683=EDGE_LOOP('',(#9676,#9678,#9680,#9682));
++#9684=FACE_OUTER_BOUND('',#9683,.F.);
++#9685=ADVANCED_FACE('',(#9684),#9675,.F.);
++#9686=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.E0));
++#9687=DIRECTION('',(0.E0,0.E0,1.E0));
++#9688=DIRECTION('',(1.E0,0.E0,0.E0));
++#9689=AXIS2_PLACEMENT_3D('',#9686,#9687,#9688);
++#9690=CYLINDRICAL_SURFACE('',#9689,9.5E-2);
++#9691=ORIENTED_EDGE('',*,*,#6039,.T.);
++#9692=ORIENTED_EDGE('',*,*,#9681,.T.);
++#9694=ORIENTED_EDGE('',*,*,#9693,.F.);
++#9695=ORIENTED_EDGE('',*,*,#9677,.F.);
++#9696=EDGE_LOOP('',(#9691,#9692,#9694,#9695));
++#9697=FACE_OUTER_BOUND('',#9696,.F.);
++#9698=ADVANCED_FACE('',(#9697),#9690,.F.);
++#9699=CARTESIAN_POINT('',(4.25E0,1.09375E1,8.25E0));
++#9700=DIRECTION('',(0.E0,0.E0,1.E0));
++#9701=DIRECTION('',(1.E0,0.E0,0.E0));
++#9702=AXIS2_PLACEMENT_3D('',#9699,#9700,#9701);
++#9703=PLANE('',#9702);
++#9704=ORIENTED_EDGE('',*,*,#9679,.T.);
++#9705=ORIENTED_EDGE('',*,*,#9693,.T.);
++#9706=EDGE_LOOP('',(#9704,#9705));
++#9707=FACE_OUTER_BOUND('',#9706,.F.);
++#9708=ADVANCED_FACE('',(#9707),#9703,.F.);
++#9709=CARTESIAN_POINT('',(4.5E0,2.E0,8.E0));
++#9710=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9711=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9712=AXIS2_PLACEMENT_3D('',#9709,#9710,#9711);
++#9713=PLANE('',#9712);
++#9715=ORIENTED_EDGE('',*,*,#9714,.T.);
++#9717=ORIENTED_EDGE('',*,*,#9716,.T.);
++#9719=ORIENTED_EDGE('',*,*,#9718,.F.);
++#9720=ORIENTED_EDGE('',*,*,#6043,.F.);
++#9721=EDGE_LOOP('',(#9715,#9717,#9719,#9720));
++#9722=FACE_OUTER_BOUND('',#9721,.F.);
++#9723=ADVANCED_FACE('',(#9722),#9713,.F.);
++#9724=CARTESIAN_POINT('',(3.75E0,2.75E0,7.931076025772E0));
++#9725=DIRECTION('',(0.E0,0.E0,1.E0));
++#9726=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9727=AXIS2_PLACEMENT_3D('',#9724,#9725,#9726);
++#9728=CYLINDRICAL_SURFACE('',#9727,7.5E-1);
++#9729=ORIENTED_EDGE('',*,*,#9714,.F.);
++#9730=ORIENTED_EDGE('',*,*,#6057,.T.);
++#9732=ORIENTED_EDGE('',*,*,#9731,.T.);
++#9734=ORIENTED_EDGE('',*,*,#9733,.T.);
++#9735=EDGE_LOOP('',(#9729,#9730,#9732,#9734));
++#9736=FACE_OUTER_BOUND('',#9735,.F.);
++#9737=ADVANCED_FACE('',(#9736),#9728,.F.);
++#9738=CARTESIAN_POINT('',(4.5E0,9.5E0,8.E0));
++#9739=DIRECTION('',(1.E0,0.E0,0.E0));
++#9740=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9741=AXIS2_PLACEMENT_3D('',#9738,#9739,#9740);
++#9742=PLANE('',#9741);
++#9743=ORIENTED_EDGE('',*,*,#9731,.F.);
++#9744=ORIENTED_EDGE('',*,*,#6055,.F.);
++#9746=ORIENTED_EDGE('',*,*,#9745,.T.);
++#9748=ORIENTED_EDGE('',*,*,#9747,.T.);
++#9749=EDGE_LOOP('',(#9743,#9744,#9746,#9748));
++#9750=FACE_OUTER_BOUND('',#9749,.F.);
++#9751=ADVANCED_FACE('',(#9750),#9742,.F.);
++#9752=CARTESIAN_POINT('',(3.75E0,8.75E0,7.931076025772E0));
++#9753=DIRECTION('',(0.E0,0.E0,1.E0));
++#9754=DIRECTION('',(1.E0,0.E0,0.E0));
++#9755=AXIS2_PLACEMENT_3D('',#9752,#9753,#9754);
++#9756=CYLINDRICAL_SURFACE('',#9755,7.5E-1);
++#9757=ORIENTED_EDGE('',*,*,#9745,.F.);
++#9758=ORIENTED_EDGE('',*,*,#6053,.T.);
++#9760=ORIENTED_EDGE('',*,*,#9759,.T.);
++#9762=ORIENTED_EDGE('',*,*,#9761,.T.);
++#9763=EDGE_LOOP('',(#9757,#9758,#9760,#9762));
++#9764=FACE_OUTER_BOUND('',#9763,.F.);
++#9765=ADVANCED_FACE('',(#9764),#9756,.F.);
++#9766=CARTESIAN_POINT('',(2.746858067304E0,9.5E0,8.E0));
++#9767=DIRECTION('',(0.E0,1.E0,0.E0));
++#9768=DIRECTION('',(1.E0,0.E0,0.E0));
++#9769=AXIS2_PLACEMENT_3D('',#9766,#9767,#9768);
++#9770=PLANE('',#9769);
++#9772=ORIENTED_EDGE('',*,*,#9771,.T.);
++#9774=ORIENTED_EDGE('',*,*,#9773,.T.);
++#9775=ORIENTED_EDGE('',*,*,#9759,.F.);
++#9776=ORIENTED_EDGE('',*,*,#6051,.F.);
++#9777=EDGE_LOOP('',(#9772,#9774,#9775,#9776));
++#9778=FACE_OUTER_BOUND('',#9777,.F.);
++#9779=ADVANCED_FACE('',(#9778),#9770,.F.);
++#9780=CARTESIAN_POINT('',(3.188160579053E0,8.75E0,7.931076025772E0));
++#9781=DIRECTION('',(0.E0,0.E0,1.E0));
++#9782=DIRECTION('',(0.E0,1.E0,0.E0));
++#9783=AXIS2_PLACEMENT_3D('',#9780,#9781,#9782);
++#9784=CYLINDRICAL_SURFACE('',#9783,7.5E-1);
++#9785=ORIENTED_EDGE('',*,*,#9771,.F.);
++#9786=ORIENTED_EDGE('',*,*,#6049,.T.);
++#9788=ORIENTED_EDGE('',*,*,#9787,.T.);
++#9790=ORIENTED_EDGE('',*,*,#9789,.T.);
++#9791=EDGE_LOOP('',(#9785,#9786,#9788,#9790));
++#9792=FACE_OUTER_BOUND('',#9791,.F.);
++#9793=ADVANCED_FACE('',(#9792),#9784,.F.);
++#9794=CARTESIAN_POINT('',(-1.419808599362E0,2.E0,8.E0));
++#9795=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#9796=DIRECTION('',(4.856429311786E-1,8.741572761215E-1,0.E0));
++#9797=AXIS2_PLACEMENT_3D('',#9794,#9795,#9796);
++#9798=PLANE('',#9797);
++#9800=ORIENTED_EDGE('',*,*,#9799,.T.);
++#9802=ORIENTED_EDGE('',*,*,#9801,.T.);
++#9803=ORIENTED_EDGE('',*,*,#9787,.F.);
++#9804=ORIENTED_EDGE('',*,*,#6047,.F.);
++#9805=EDGE_LOOP('',(#9800,#9802,#9803,#9804));
++#9806=FACE_OUTER_BOUND('',#9805,.F.);
++#9807=ADVANCED_FACE('',(#9806),#9798,.F.);
++#9808=CARTESIAN_POINT('',(-1.451727542799E-1,2.75E0,7.931076025772E0));
++#9809=DIRECTION('',(0.E0,0.E0,1.E0));
++#9810=DIRECTION('',(-8.741572761215E-1,4.856429311786E-1,0.E0));
++#9811=AXIS2_PLACEMENT_3D('',#9808,#9809,#9810);
++#9812=CYLINDRICAL_SURFACE('',#9811,7.5E-1);
++#9813=ORIENTED_EDGE('',*,*,#9799,.F.);
++#9814=ORIENTED_EDGE('',*,*,#6045,.T.);
++#9815=ORIENTED_EDGE('',*,*,#9718,.T.);
++#9817=ORIENTED_EDGE('',*,*,#9816,.T.);
++#9818=EDGE_LOOP('',(#9813,#9814,#9815,#9817));
++#9819=FACE_OUTER_BOUND('',#9818,.F.);
++#9820=ADVANCED_FACE('',(#9819),#9812,.F.);
++#9821=CARTESIAN_POINT('',(0.E0,0.E0,8.5E0));
++#9822=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9823=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9824=AXIS2_PLACEMENT_3D('',#9821,#9822,#9823);
++#9825=PLANE('',#9824);
++#9826=ORIENTED_EDGE('',*,*,#9733,.F.);
++#9827=ORIENTED_EDGE('',*,*,#9747,.F.);
++#9828=ORIENTED_EDGE('',*,*,#9761,.F.);
++#9829=ORIENTED_EDGE('',*,*,#9773,.F.);
++#9830=ORIENTED_EDGE('',*,*,#9789,.F.);
++#9831=ORIENTED_EDGE('',*,*,#9801,.F.);
++#9832=ORIENTED_EDGE('',*,*,#9816,.F.);
++#9833=ORIENTED_EDGE('',*,*,#9716,.F.);
++#9834=EDGE_LOOP('',(#9826,#9827,#9828,#9829,#9830,#9831,#9832,#9833));
++#9835=FACE_OUTER_BOUND('',#9834,.F.);
++#9836=ADVANCED_FACE('',(#9835),#9825,.T.);
++#9837=CARTESIAN_POINT('',(2.541980859936E1,2.E0,8.E0));
++#9838=DIRECTION('',(-8.741572761215E-1,-4.856429311786E-1,0.E0));
++#9839=DIRECTION('',(-4.856429311786E-1,8.741572761215E-1,0.E0));
++#9840=AXIS2_PLACEMENT_3D('',#9837,#9838,#9839);
++#9841=PLANE('',#9840);
++#9843=ORIENTED_EDGE('',*,*,#9842,.T.);
++#9844=ORIENTED_EDGE('',*,*,#6061,.T.);
++#9846=ORIENTED_EDGE('',*,*,#9845,.F.);
++#9848=ORIENTED_EDGE('',*,*,#9847,.F.);
++#9849=EDGE_LOOP('',(#9843,#9844,#9846,#9848));
++#9850=FACE_OUTER_BOUND('',#9849,.F.);
++#9851=ADVANCED_FACE('',(#9850),#9841,.T.);
++#9852=CARTESIAN_POINT('',(2.414517275428E1,2.75E0,8.558891941783E0));
++#9853=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9854=DIRECTION('',(8.741572761215E-1,4.856429311786E-1,0.E0));
++#9855=AXIS2_PLACEMENT_3D('',#9852,#9853,#9854);
++#9856=CYLINDRICAL_SURFACE('',#9855,7.5E-1);
++#9857=ORIENTED_EDGE('',*,*,#9842,.F.);
++#9859=ORIENTED_EDGE('',*,*,#9858,.T.);
++#9861=ORIENTED_EDGE('',*,*,#9860,.T.);
++#9862=ORIENTED_EDGE('',*,*,#6063,.T.);
++#9863=EDGE_LOOP('',(#9857,#9859,#9861,#9862));
++#9864=FACE_OUTER_BOUND('',#9863,.F.);
++#9865=ADVANCED_FACE('',(#9864),#9856,.F.);
++#9866=CARTESIAN_POINT('',(2.4E1,0.E0,8.5E0));
++#9867=DIRECTION('',(0.E0,0.E0,1.E0));
++#9868=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9869=AXIS2_PLACEMENT_3D('',#9866,#9867,#9868);
++#9870=PLANE('',#9869);
++#9872=ORIENTED_EDGE('',*,*,#9871,.F.);
++#9874=ORIENTED_EDGE('',*,*,#9873,.T.);
++#9875=ORIENTED_EDGE('',*,*,#9858,.F.);
++#9876=ORIENTED_EDGE('',*,*,#9847,.T.);
++#9878=ORIENTED_EDGE('',*,*,#9877,.F.);
++#9880=ORIENTED_EDGE('',*,*,#9879,.T.);
++#9882=ORIENTED_EDGE('',*,*,#9881,.F.);
++#9884=ORIENTED_EDGE('',*,*,#9883,.T.);
++#9885=EDGE_LOOP('',(#9872,#9874,#9875,#9876,#9878,#9880,#9882,#9884));
++#9886=FACE_OUTER_BOUND('',#9885,.F.);
++#9887=ADVANCED_FACE('',(#9886),#9870,.F.);
++#9888=CARTESIAN_POINT('',(2.025E1,2.75E0,8.558891941783E0));
++#9889=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9890=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9891=AXIS2_PLACEMENT_3D('',#9888,#9889,#9890);
++#9892=CYLINDRICAL_SURFACE('',#9891,7.5E-1);
++#9894=ORIENTED_EDGE('',*,*,#9893,.F.);
++#9895=ORIENTED_EDGE('',*,*,#9871,.T.);
++#9897=ORIENTED_EDGE('',*,*,#9896,.T.);
++#9898=ORIENTED_EDGE('',*,*,#6067,.T.);
++#9899=EDGE_LOOP('',(#9894,#9895,#9897,#9898));
++#9900=FACE_OUTER_BOUND('',#9899,.F.);
++#9901=ADVANCED_FACE('',(#9900),#9892,.F.);
++#9902=CARTESIAN_POINT('',(1.95E1,2.E0,8.E0));
++#9903=DIRECTION('',(0.E0,1.E0,0.E0));
++#9904=DIRECTION('',(1.E0,0.E0,0.E0));
++#9905=AXIS2_PLACEMENT_3D('',#9902,#9903,#9904);
++#9906=PLANE('',#9905);
++#9907=ORIENTED_EDGE('',*,*,#9893,.T.);
++#9908=ORIENTED_EDGE('',*,*,#6065,.T.);
++#9909=ORIENTED_EDGE('',*,*,#9860,.F.);
++#9910=ORIENTED_EDGE('',*,*,#9873,.F.);
++#9911=EDGE_LOOP('',(#9907,#9908,#9909,#9910));
++#9912=FACE_OUTER_BOUND('',#9911,.F.);
++#9913=ADVANCED_FACE('',(#9912),#9906,.T.);
++#9914=CARTESIAN_POINT('',(1.95E1,9.5E0,8.E0));
++#9915=DIRECTION('',(1.E0,0.E0,0.E0));
++#9916=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9917=AXIS2_PLACEMENT_3D('',#9914,#9915,#9916);
++#9918=PLANE('',#9917);
++#9919=ORIENTED_EDGE('',*,*,#9896,.F.);
++#9920=ORIENTED_EDGE('',*,*,#9883,.F.);
++#9922=ORIENTED_EDGE('',*,*,#9921,.T.);
++#9923=ORIENTED_EDGE('',*,*,#6069,.T.);
++#9924=EDGE_LOOP('',(#9919,#9920,#9922,#9923));
++#9925=FACE_OUTER_BOUND('',#9924,.F.);
++#9926=ADVANCED_FACE('',(#9925),#9918,.T.);
++#9927=CARTESIAN_POINT('',(2.025E1,8.75E0,8.558891941783E0));
++#9928=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9929=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9930=AXIS2_PLACEMENT_3D('',#9927,#9928,#9929);
++#9931=CYLINDRICAL_SURFACE('',#9930,7.5E-1);
++#9932=ORIENTED_EDGE('',*,*,#9921,.F.);
++#9933=ORIENTED_EDGE('',*,*,#9881,.T.);
++#9935=ORIENTED_EDGE('',*,*,#9934,.T.);
++#9936=ORIENTED_EDGE('',*,*,#6071,.T.);
++#9937=EDGE_LOOP('',(#9932,#9933,#9935,#9936));
++#9938=FACE_OUTER_BOUND('',#9937,.F.);
++#9939=ADVANCED_FACE('',(#9938),#9931,.F.);
++#9940=CARTESIAN_POINT('',(2.125314193270E1,9.5E0,8.E0));
++#9941=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9942=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9943=AXIS2_PLACEMENT_3D('',#9940,#9941,#9942);
++#9944=PLANE('',#9943);
++#9946=ORIENTED_EDGE('',*,*,#9945,.T.);
++#9947=ORIENTED_EDGE('',*,*,#6073,.T.);
++#9948=ORIENTED_EDGE('',*,*,#9934,.F.);
++#9949=ORIENTED_EDGE('',*,*,#9879,.F.);
++#9950=EDGE_LOOP('',(#9946,#9947,#9948,#9949));
++#9951=FACE_OUTER_BOUND('',#9950,.F.);
++#9952=ADVANCED_FACE('',(#9951),#9944,.T.);
++#9953=CARTESIAN_POINT('',(2.081183942095E1,8.75E0,8.558891941783E0));
++#9954=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9955=DIRECTION('',(0.E0,1.E0,0.E0));
++#9956=AXIS2_PLACEMENT_3D('',#9953,#9954,#9955);
++#9957=CYLINDRICAL_SURFACE('',#9956,7.5E-1);
++#9958=ORIENTED_EDGE('',*,*,#9945,.F.);
++#9959=ORIENTED_EDGE('',*,*,#9877,.T.);
++#9960=ORIENTED_EDGE('',*,*,#9845,.T.);
++#9961=ORIENTED_EDGE('',*,*,#6075,.T.);
++#9962=EDGE_LOOP('',(#9958,#9959,#9960,#9961));
++#9963=FACE_OUTER_BOUND('',#9962,.F.);
++#9964=ADVANCED_FACE('',(#9963),#9957,.F.);
++#9965=CARTESIAN_POINT('',(7.5E0,0.E0,6.875E-1));
++#9966=DIRECTION('',(0.E0,0.E0,-1.E0));
++#9967=DIRECTION('',(1.E0,0.E0,0.E0));
++#9968=AXIS2_PLACEMENT_3D('',#9965,#9966,#9967);
++#9969=PLANE('',#9968);
++#9970=ORIENTED_EDGE('',*,*,#5726,.F.);
++#9972=ORIENTED_EDGE('',*,*,#9971,.T.);
++#9974=ORIENTED_EDGE('',*,*,#9973,.T.);
++#9976=ORIENTED_EDGE('',*,*,#9975,.F.);
++#9977=EDGE_LOOP('',(#9970,#9972,#9974,#9976));
++#9978=FACE_OUTER_BOUND('',#9977,.F.);
++#9979=ADVANCED_FACE('',(#9978),#9969,.F.);
++#9980=CARTESIAN_POINT('',(7.5E0,0.E0,1.25E0));
++#9981=DIRECTION('',(0.E0,-1.E0,0.E0));
++#9982=DIRECTION('',(1.E0,0.E0,0.E0));
++#9983=AXIS2_PLACEMENT_3D('',#9980,#9981,#9982);
++#9984=CYLINDRICAL_SURFACE('',#9983,5.625E-1);
++#9985=ORIENTED_EDGE('',*,*,#5732,.F.);
++#9987=ORIENTED_EDGE('',*,*,#9986,.T.);
++#9989=ORIENTED_EDGE('',*,*,#9988,.T.);
++#9990=ORIENTED_EDGE('',*,*,#9971,.F.);
++#9991=EDGE_LOOP('',(#9985,#9987,#9989,#9990));
++#9992=FACE_OUTER_BOUND('',#9991,.F.);
++#9993=ADVANCED_FACE('',(#9992),#9984,.F.);
++#9994=CARTESIAN_POINT('',(1.05E1,0.E0,1.8125E0));
++#9995=DIRECTION('',(0.E0,0.E0,1.E0));
++#9996=DIRECTION('',(-1.E0,0.E0,0.E0));
++#9997=AXIS2_PLACEMENT_3D('',#9994,#9995,#9996);
++#9998=PLANE('',#9997);
++#9999=ORIENTED_EDGE('',*,*,#5730,.F.);
++#10001=ORIENTED_EDGE('',*,*,#10000,.T.);
++#10003=ORIENTED_EDGE('',*,*,#10002,.T.);
++#10004=ORIENTED_EDGE('',*,*,#9986,.F.);
++#10005=EDGE_LOOP('',(#9999,#10001,#10003,#10004));
++#10006=FACE_OUTER_BOUND('',#10005,.F.);
++#10007=ADVANCED_FACE('',(#10006),#9998,.F.);
++#10008=CARTESIAN_POINT('',(1.05E1,0.E0,1.25E0));
++#10009=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10010=DIRECTION('',(1.E0,0.E0,0.E0));
++#10011=AXIS2_PLACEMENT_3D('',#10008,#10009,#10010);
++#10012=CYLINDRICAL_SURFACE('',#10011,5.625E-1);
++#10013=ORIENTED_EDGE('',*,*,#5728,.F.);
++#10014=ORIENTED_EDGE('',*,*,#9975,.T.);
++#10016=ORIENTED_EDGE('',*,*,#10015,.T.);
++#10017=ORIENTED_EDGE('',*,*,#10000,.F.);
++#10018=EDGE_LOOP('',(#10013,#10014,#10016,#10017));
++#10019=FACE_OUTER_BOUND('',#10018,.F.);
++#10020=ADVANCED_FACE('',(#10019),#10012,.F.);
++#10021=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10022=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10023=DIRECTION('',(1.E0,0.E0,0.E0));
++#10024=AXIS2_PLACEMENT_3D('',#10021,#10022,#10023);
++#10025=PLANE('',#10024);
++#10026=ORIENTED_EDGE('',*,*,#9973,.F.);
++#10027=ORIENTED_EDGE('',*,*,#9988,.F.);
++#10028=ORIENTED_EDGE('',*,*,#10002,.F.);
++#10029=ORIENTED_EDGE('',*,*,#10015,.F.);
++#10030=EDGE_LOOP('',(#10026,#10027,#10028,#10029));
++#10031=FACE_OUTER_BOUND('',#10030,.F.);
++#10032=ADVANCED_FACE('',(#10031),#10025,.T.);
++#10033=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10034=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10035=DIRECTION('',(1.E0,0.E0,0.E0));
++#10036=AXIS2_PLACEMENT_3D('',#10033,#10034,#10035);
++#10037=PLANE('',#10036);
++#10039=ORIENTED_EDGE('',*,*,#10038,.F.);
++#10041=ORIENTED_EDGE('',*,*,#10040,.F.);
++#10043=ORIENTED_EDGE('',*,*,#10042,.F.);
++#10045=ORIENTED_EDGE('',*,*,#10044,.F.);
++#10047=ORIENTED_EDGE('',*,*,#10046,.F.);
++#10048=EDGE_LOOP('',(#10039,#10041,#10043,#10045,#10047));
++#10049=FACE_OUTER_BOUND('',#10048,.F.);
++#10050=ADVANCED_FACE('',(#10049),#10037,.T.);
++#10051=CARTESIAN_POINT('',(1.455736763592E0,-6.892397422826E-2,
++4.577195232320E0));
++#10052=DIRECTION('',(0.E0,1.E0,0.E0));
++#10053=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#10054=AXIS2_PLACEMENT_3D('',#10051,#10052,#10053);
++#10055=CYLINDRICAL_SURFACE('',#10054,7.5E-1);
++#10057=ORIENTED_EDGE('',*,*,#10056,.F.);
++#10058=ORIENTED_EDGE('',*,*,#5738,.T.);
++#10060=ORIENTED_EDGE('',*,*,#10059,.T.);
++#10061=ORIENTED_EDGE('',*,*,#10038,.T.);
++#10062=EDGE_LOOP('',(#10057,#10058,#10060,#10061));
++#10063=FACE_OUTER_BOUND('',#10062,.F.);
++#10064=ADVANCED_FACE('',(#10063),#10055,.F.);
++#10065=CARTESIAN_POINT('',(6.875E-1,0.E0,4.284771824132E0));
++#10066=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#10067=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#10068=AXIS2_PLACEMENT_3D('',#10065,#10066,#10067);
++#10069=PLANE('',#10068);
++#10070=ORIENTED_EDGE('',*,*,#10056,.T.);
++#10071=ORIENTED_EDGE('',*,*,#10046,.T.);
++#10073=ORIENTED_EDGE('',*,*,#10072,.F.);
++#10074=ORIENTED_EDGE('',*,*,#5740,.F.);
++#10075=EDGE_LOOP('',(#10070,#10071,#10073,#10074));
++#10076=FACE_OUTER_BOUND('',#10075,.F.);
++#10077=ADVANCED_FACE('',(#10076),#10069,.F.);
++#10078=CARTESIAN_POINT('',(4.553039342392E0,0.E0,1.645354088550E0));
++#10079=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10080=DIRECTION('',(1.E0,0.E0,0.E0));
++#10081=AXIS2_PLACEMENT_3D('',#10078,#10079,#10080);
++#10082=CYLINDRICAL_SURFACE('',#10081,8.669989027347E-1);
++#10083=ORIENTED_EDGE('',*,*,#5742,.F.);
++#10084=ORIENTED_EDGE('',*,*,#10072,.T.);
++#10085=ORIENTED_EDGE('',*,*,#10044,.T.);
++#10087=ORIENTED_EDGE('',*,*,#10086,.F.);
++#10088=EDGE_LOOP('',(#10083,#10084,#10085,#10087));
++#10089=FACE_OUTER_BOUND('',#10088,.F.);
++#10090=ADVANCED_FACE('',(#10089),#10082,.F.);
++#10091=CARTESIAN_POINT('',(7.5E0,0.E0,7.5E0));
++#10092=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10093=DIRECTION('',(1.E0,0.E0,0.E0));
++#10094=AXIS2_PLACEMENT_3D('',#10091,#10092,#10093);
++#10095=CYLINDRICAL_SURFACE('',#10094,5.6875E0);
++#10096=ORIENTED_EDGE('',*,*,#5744,.T.);
++#10097=ORIENTED_EDGE('',*,*,#10086,.T.);
++#10098=ORIENTED_EDGE('',*,*,#10042,.T.);
++#10100=ORIENTED_EDGE('',*,*,#10099,.F.);
++#10101=EDGE_LOOP('',(#10096,#10097,#10098,#10100));
++#10102=FACE_OUTER_BOUND('',#10101,.F.);
++#10103=ADVANCED_FACE('',(#10102),#10095,.T.);
++#10104=CARTESIAN_POINT('',(1.61E0,0.E0,4.5E0));
++#10105=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10106=DIRECTION('',(1.E0,0.E0,0.E0));
++#10107=AXIS2_PLACEMENT_3D('',#10104,#10105,#10106);
++#10108=CYLINDRICAL_SURFACE('',#10107,9.225E-1);
++#10109=ORIENTED_EDGE('',*,*,#10059,.F.);
++#10110=ORIENTED_EDGE('',*,*,#5736,.F.);
++#10111=ORIENTED_EDGE('',*,*,#10099,.T.);
++#10112=ORIENTED_EDGE('',*,*,#10040,.T.);
++#10113=EDGE_LOOP('',(#10109,#10110,#10111,#10112));
++#10114=FACE_OUTER_BOUND('',#10113,.F.);
++#10115=ADVANCED_FACE('',(#10114),#10108,.F.);
++#10116=CARTESIAN_POINT('',(-1.85E-1,7.463919417831E-1,7.815E0));
++#10117=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10118=DIRECTION('',(1.E0,0.E0,0.E0));
++#10119=AXIS2_PLACEMENT_3D('',#10116,#10117,#10118);
++#10120=CYLINDRICAL_SURFACE('',#10119,8.75E-1);
++#10122=ORIENTED_EDGE('',*,*,#10121,.T.);
++#10123=ORIENTED_EDGE('',*,*,#5748,.T.);
++#10125=ORIENTED_EDGE('',*,*,#10124,.F.);
++#10127=ORIENTED_EDGE('',*,*,#10126,.T.);
++#10128=EDGE_LOOP('',(#10122,#10123,#10125,#10127));
++#10129=FACE_OUTER_BOUND('',#10128,.F.);
++#10130=ADVANCED_FACE('',(#10129),#10120,.T.);
++#10131=CARTESIAN_POINT('',(6.9E-1,0.E0,8.69E0));
++#10132=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10133=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10134=AXIS2_PLACEMENT_3D('',#10131,#10132,#10133);
++#10135=PLANE('',#10134);
++#10136=ORIENTED_EDGE('',*,*,#10121,.F.);
++#10138=ORIENTED_EDGE('',*,*,#10137,.T.);
++#10140=ORIENTED_EDGE('',*,*,#10139,.F.);
++#10141=ORIENTED_EDGE('',*,*,#5750,.F.);
++#10142=EDGE_LOOP('',(#10136,#10138,#10140,#10141));
++#10143=FACE_OUTER_BOUND('',#10142,.F.);
++#10144=ADVANCED_FACE('',(#10143),#10135,.F.);
++#10145=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10146=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10147=DIRECTION('',(1.E0,0.E0,0.E0));
++#10148=AXIS2_PLACEMENT_3D('',#10145,#10146,#10147);
++#10149=PLANE('',#10148);
++#10151=ORIENTED_EDGE('',*,*,#10150,.F.);
++#10153=ORIENTED_EDGE('',*,*,#10152,.F.);
++#10155=ORIENTED_EDGE('',*,*,#10154,.F.);
++#10157=ORIENTED_EDGE('',*,*,#10156,.F.);
++#10158=ORIENTED_EDGE('',*,*,#10137,.F.);
++#10159=ORIENTED_EDGE('',*,*,#10126,.F.);
++#10161=ORIENTED_EDGE('',*,*,#10160,.F.);
++#10163=ORIENTED_EDGE('',*,*,#10162,.F.);
++#10165=ORIENTED_EDGE('',*,*,#10164,.F.);
++#10167=ORIENTED_EDGE('',*,*,#10166,.F.);
++#10169=ORIENTED_EDGE('',*,*,#10168,.F.);
++#10171=ORIENTED_EDGE('',*,*,#10170,.F.);
++#10173=ORIENTED_EDGE('',*,*,#10172,.F.);
++#10175=ORIENTED_EDGE('',*,*,#10174,.F.);
++#10176=EDGE_LOOP('',(#10151,#10153,#10155,#10157,#10158,#10159,#10161,#10163,
++#10165,#10167,#10169,#10171,#10173,#10175));
++#10177=FACE_OUTER_BOUND('',#10176,.F.);
++#10178=ADVANCED_FACE('',(#10177),#10149,.T.);
++#10179=CARTESIAN_POINT('',(1.8125E0,0.E0,8.69E0));
++#10180=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10181=DIRECTION('',(1.E0,0.E0,0.E0));
++#10182=AXIS2_PLACEMENT_3D('',#10179,#10180,#10181);
++#10183=PLANE('',#10182);
++#10185=ORIENTED_EDGE('',*,*,#10184,.F.);
++#10186=ORIENTED_EDGE('',*,*,#10150,.T.);
++#10188=ORIENTED_EDGE('',*,*,#10187,.F.);
++#10189=ORIENTED_EDGE('',*,*,#5758,.F.);
++#10190=EDGE_LOOP('',(#10185,#10186,#10188,#10189));
++#10191=FACE_OUTER_BOUND('',#10190,.F.);
++#10192=ADVANCED_FACE('',(#10191),#10183,.F.);
++#10193=CARTESIAN_POINT('',(2.6875E0,7.463919417831E-1,7.815E0));
++#10194=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10195=DIRECTION('',(0.E0,0.E0,1.E0));
++#10196=AXIS2_PLACEMENT_3D('',#10193,#10194,#10195);
++#10197=CYLINDRICAL_SURFACE('',#10196,8.75E-1);
++#10198=ORIENTED_EDGE('',*,*,#10184,.T.);
++#10199=ORIENTED_EDGE('',*,*,#5756,.T.);
++#10201=ORIENTED_EDGE('',*,*,#10200,.F.);
++#10202=ORIENTED_EDGE('',*,*,#10152,.T.);
++#10203=EDGE_LOOP('',(#10198,#10199,#10201,#10202));
++#10204=FACE_OUTER_BOUND('',#10203,.F.);
++#10205=ADVANCED_FACE('',(#10204),#10197,.T.);
++#10206=CARTESIAN_POINT('',(1.8125E0,0.E0,7.5E0));
++#10207=DIRECTION('',(1.E0,0.E0,0.E0));
++#10208=DIRECTION('',(0.E0,0.E0,1.E0));
++#10209=AXIS2_PLACEMENT_3D('',#10206,#10207,#10208);
++#10210=PLANE('',#10209);
++#10211=ORIENTED_EDGE('',*,*,#10200,.T.);
++#10212=ORIENTED_EDGE('',*,*,#5754,.F.);
++#10214=ORIENTED_EDGE('',*,*,#10213,.T.);
++#10215=ORIENTED_EDGE('',*,*,#10154,.T.);
++#10216=EDGE_LOOP('',(#10211,#10212,#10214,#10215));
++#10217=FACE_OUTER_BOUND('',#10216,.F.);
++#10218=ADVANCED_FACE('',(#10217),#10210,.F.);
++#10219=CARTESIAN_POINT('',(1.25125E0,0.E0,7.5E0));
++#10220=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10221=DIRECTION('',(1.E0,0.E0,0.E0));
++#10222=AXIS2_PLACEMENT_3D('',#10219,#10220,#10221);
++#10223=CYLINDRICAL_SURFACE('',#10222,5.6125E-1);
++#10224=ORIENTED_EDGE('',*,*,#5752,.F.);
++#10225=ORIENTED_EDGE('',*,*,#10139,.T.);
++#10226=ORIENTED_EDGE('',*,*,#10156,.T.);
++#10227=ORIENTED_EDGE('',*,*,#10213,.F.);
++#10228=EDGE_LOOP('',(#10224,#10225,#10226,#10227));
++#10229=FACE_OUTER_BOUND('',#10228,.F.);
++#10230=ADVANCED_FACE('',(#10229),#10223,.F.);
++#10231=CARTESIAN_POINT('',(3.4375E0,-6.892397422826E-2,9.565E0));
++#10232=DIRECTION('',(0.E0,1.E0,0.E0));
++#10233=DIRECTION('',(1.E0,0.E0,0.E0));
++#10234=AXIS2_PLACEMENT_3D('',#10231,#10232,#10233);
++#10235=CYLINDRICAL_SURFACE('',#10234,8.75E-1);
++#10237=ORIENTED_EDGE('',*,*,#10236,.F.);
++#10238=ORIENTED_EDGE('',*,*,#5760,.T.);
++#10239=ORIENTED_EDGE('',*,*,#10187,.T.);
++#10240=ORIENTED_EDGE('',*,*,#10174,.T.);
++#10241=EDGE_LOOP('',(#10237,#10238,#10239,#10240));
++#10242=FACE_OUTER_BOUND('',#10241,.F.);
++#10243=ADVANCED_FACE('',(#10242),#10235,.F.);
++#10244=CARTESIAN_POINT('',(4.3125E0,0.E0,8.69E0));
++#10245=DIRECTION('',(1.E0,0.E0,0.E0));
++#10246=DIRECTION('',(0.E0,0.E0,1.E0));
++#10247=AXIS2_PLACEMENT_3D('',#10244,#10245,#10246);
++#10248=PLANE('',#10247);
++#10249=ORIENTED_EDGE('',*,*,#10236,.T.);
++#10250=ORIENTED_EDGE('',*,*,#10172,.T.);
++#10252=ORIENTED_EDGE('',*,*,#10251,.F.);
++#10253=ORIENTED_EDGE('',*,*,#5762,.F.);
++#10254=EDGE_LOOP('',(#10249,#10250,#10252,#10253));
++#10255=FACE_OUTER_BOUND('',#10254,.F.);
++#10256=ADVANCED_FACE('',(#10255),#10248,.F.);
++#10257=CARTESIAN_POINT('',(3.4375E0,-6.892397422826E-2,1.0375E1));
++#10258=DIRECTION('',(0.E0,1.E0,0.E0));
++#10259=DIRECTION('',(0.E0,0.E0,1.E0));
++#10260=AXIS2_PLACEMENT_3D('',#10257,#10258,#10259);
++#10261=CYLINDRICAL_SURFACE('',#10260,8.75E-1);
++#10263=ORIENTED_EDGE('',*,*,#10262,.F.);
++#10264=ORIENTED_EDGE('',*,*,#5764,.T.);
++#10265=ORIENTED_EDGE('',*,*,#10251,.T.);
++#10266=ORIENTED_EDGE('',*,*,#10170,.T.);
++#10267=EDGE_LOOP('',(#10263,#10264,#10265,#10266));
++#10268=FACE_OUTER_BOUND('',#10267,.F.);
++#10269=ADVANCED_FACE('',(#10268),#10261,.F.);
++#10270=CARTESIAN_POINT('',(4.3125E0,0.E0,1.125E1));
++#10271=DIRECTION('',(0.E0,0.E0,1.E0));
++#10272=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10273=AXIS2_PLACEMENT_3D('',#10270,#10271,#10272);
++#10274=PLANE('',#10273);
++#10276=ORIENTED_EDGE('',*,*,#10275,.F.);
++#10277=ORIENTED_EDGE('',*,*,#5766,.F.);
++#10278=ORIENTED_EDGE('',*,*,#10262,.T.);
++#10279=ORIENTED_EDGE('',*,*,#10168,.T.);
++#10280=EDGE_LOOP('',(#10276,#10277,#10278,#10279));
++#10281=FACE_OUTER_BOUND('',#10280,.F.);
++#10282=ADVANCED_FACE('',(#10281),#10274,.F.);
++#10283=CARTESIAN_POINT('',(-4.375E-1,-6.892397422826E-2,1.0375E1));
++#10284=DIRECTION('',(0.E0,1.E0,0.E0));
++#10285=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10286=AXIS2_PLACEMENT_3D('',#10283,#10284,#10285);
++#10287=CYLINDRICAL_SURFACE('',#10286,8.75E-1);
++#10289=ORIENTED_EDGE('',*,*,#10288,.F.);
++#10290=ORIENTED_EDGE('',*,*,#5768,.T.);
++#10291=ORIENTED_EDGE('',*,*,#10275,.T.);
++#10292=ORIENTED_EDGE('',*,*,#10166,.T.);
++#10293=EDGE_LOOP('',(#10289,#10290,#10291,#10292));
++#10294=FACE_OUTER_BOUND('',#10293,.F.);
++#10295=ADVANCED_FACE('',(#10294),#10287,.F.);
++#10296=CARTESIAN_POINT('',(-1.3125E0,0.E0,1.125E1));
++#10297=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10298=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10299=AXIS2_PLACEMENT_3D('',#10296,#10297,#10298);
++#10300=PLANE('',#10299);
++#10301=ORIENTED_EDGE('',*,*,#10288,.T.);
++#10302=ORIENTED_EDGE('',*,*,#10164,.T.);
++#10304=ORIENTED_EDGE('',*,*,#10303,.F.);
++#10305=ORIENTED_EDGE('',*,*,#5770,.F.);
++#10306=EDGE_LOOP('',(#10301,#10302,#10304,#10305));
++#10307=FACE_OUTER_BOUND('',#10306,.F.);
++#10308=ADVANCED_FACE('',(#10307),#10300,.F.);
++#10309=CARTESIAN_POINT('',(-4.375E-1,-6.892397422826E-2,9.565E0));
++#10310=DIRECTION('',(0.E0,1.E0,0.E0));
++#10311=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10312=AXIS2_PLACEMENT_3D('',#10309,#10310,#10311);
++#10313=CYLINDRICAL_SURFACE('',#10312,8.75E-1);
++#10315=ORIENTED_EDGE('',*,*,#10314,.F.);
++#10316=ORIENTED_EDGE('',*,*,#5772,.T.);
++#10317=ORIENTED_EDGE('',*,*,#10303,.T.);
++#10318=ORIENTED_EDGE('',*,*,#10162,.T.);
++#10319=EDGE_LOOP('',(#10315,#10316,#10317,#10318));
++#10320=FACE_OUTER_BOUND('',#10319,.F.);
++#10321=ADVANCED_FACE('',(#10320),#10313,.F.);
++#10322=CARTESIAN_POINT('',(-1.3125E0,0.E0,8.69E0));
++#10323=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10324=DIRECTION('',(1.E0,0.E0,0.E0));
++#10325=AXIS2_PLACEMENT_3D('',#10322,#10323,#10324);
++#10326=PLANE('',#10325);
++#10327=ORIENTED_EDGE('',*,*,#10124,.T.);
++#10328=ORIENTED_EDGE('',*,*,#5774,.F.);
++#10329=ORIENTED_EDGE('',*,*,#10314,.T.);
++#10330=ORIENTED_EDGE('',*,*,#10160,.T.);
++#10331=EDGE_LOOP('',(#10327,#10328,#10329,#10330));
++#10332=FACE_OUTER_BOUND('',#10331,.F.);
++#10333=ADVANCED_FACE('',(#10332),#10326,.F.);
++#10334=CARTESIAN_POINT('',(6.875E-1,0.E0,1.65E1));
++#10335=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10336=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10337=AXIS2_PLACEMENT_3D('',#10334,#10335,#10336);
++#10338=PLANE('',#10337);
++#10339=ORIENTED_EDGE('',*,*,#5778,.F.);
++#10341=ORIENTED_EDGE('',*,*,#10340,.T.);
++#10343=ORIENTED_EDGE('',*,*,#10342,.T.);
++#10345=ORIENTED_EDGE('',*,*,#10344,.F.);
++#10346=EDGE_LOOP('',(#10339,#10341,#10343,#10345));
++#10347=FACE_OUTER_BOUND('',#10346,.F.);
++#10348=ADVANCED_FACE('',(#10347),#10338,.F.);
++#10349=CARTESIAN_POINT('',(1.25E0,0.E0,1.65E1));
++#10350=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10351=DIRECTION('',(1.E0,0.E0,0.E0));
++#10352=AXIS2_PLACEMENT_3D('',#10349,#10350,#10351);
++#10353=CYLINDRICAL_SURFACE('',#10352,5.625E-1);
++#10354=ORIENTED_EDGE('',*,*,#5784,.F.);
++#10356=ORIENTED_EDGE('',*,*,#10355,.T.);
++#10358=ORIENTED_EDGE('',*,*,#10357,.T.);
++#10359=ORIENTED_EDGE('',*,*,#10340,.F.);
++#10360=EDGE_LOOP('',(#10354,#10356,#10358,#10359));
++#10361=FACE_OUTER_BOUND('',#10360,.F.);
++#10362=ADVANCED_FACE('',(#10361),#10353,.F.);
++#10363=CARTESIAN_POINT('',(1.8125E0,0.E0,1.35E1));
++#10364=DIRECTION('',(1.E0,0.E0,0.E0));
++#10365=DIRECTION('',(0.E0,0.E0,1.E0));
++#10366=AXIS2_PLACEMENT_3D('',#10363,#10364,#10365);
++#10367=PLANE('',#10366);
++#10368=ORIENTED_EDGE('',*,*,#5782,.F.);
++#10370=ORIENTED_EDGE('',*,*,#10369,.T.);
++#10372=ORIENTED_EDGE('',*,*,#10371,.T.);
++#10373=ORIENTED_EDGE('',*,*,#10355,.F.);
++#10374=EDGE_LOOP('',(#10368,#10370,#10372,#10373));
++#10375=FACE_OUTER_BOUND('',#10374,.F.);
++#10376=ADVANCED_FACE('',(#10375),#10367,.F.);
++#10377=CARTESIAN_POINT('',(1.25E0,0.E0,1.35E1));
++#10378=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10379=DIRECTION('',(1.E0,0.E0,0.E0));
++#10380=AXIS2_PLACEMENT_3D('',#10377,#10378,#10379);
++#10381=CYLINDRICAL_SURFACE('',#10380,5.625E-1);
++#10382=ORIENTED_EDGE('',*,*,#5780,.F.);
++#10383=ORIENTED_EDGE('',*,*,#10344,.T.);
++#10385=ORIENTED_EDGE('',*,*,#10384,.T.);
++#10386=ORIENTED_EDGE('',*,*,#10369,.F.);
++#10387=EDGE_LOOP('',(#10382,#10383,#10385,#10386));
++#10388=FACE_OUTER_BOUND('',#10387,.F.);
++#10389=ADVANCED_FACE('',(#10388),#10381,.F.);
++#10390=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10391=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10392=DIRECTION('',(1.E0,0.E0,0.E0));
++#10393=AXIS2_PLACEMENT_3D('',#10390,#10391,#10392);
++#10394=PLANE('',#10393);
++#10395=ORIENTED_EDGE('',*,*,#10342,.F.);
++#10396=ORIENTED_EDGE('',*,*,#10357,.F.);
++#10397=ORIENTED_EDGE('',*,*,#10371,.F.);
++#10398=ORIENTED_EDGE('',*,*,#10384,.F.);
++#10399=EDGE_LOOP('',(#10395,#10396,#10397,#10398));
++#10400=FACE_OUTER_BOUND('',#10399,.F.);
++#10401=ADVANCED_FACE('',(#10400),#10394,.T.);
++#10402=CARTESIAN_POINT('',(6.875E-1,0.E0,2.25E1));
++#10403=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10404=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10405=AXIS2_PLACEMENT_3D('',#10402,#10403,#10404);
++#10406=PLANE('',#10405);
++#10407=ORIENTED_EDGE('',*,*,#5788,.F.);
++#10409=ORIENTED_EDGE('',*,*,#10408,.T.);
++#10411=ORIENTED_EDGE('',*,*,#10410,.T.);
++#10413=ORIENTED_EDGE('',*,*,#10412,.F.);
++#10414=EDGE_LOOP('',(#10407,#10409,#10411,#10413));
++#10415=FACE_OUTER_BOUND('',#10414,.F.);
++#10416=ADVANCED_FACE('',(#10415),#10406,.F.);
++#10417=CARTESIAN_POINT('',(1.25E0,0.E0,2.25E1));
++#10418=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10419=DIRECTION('',(1.E0,0.E0,0.E0));
++#10420=AXIS2_PLACEMENT_3D('',#10417,#10418,#10419);
++#10421=CYLINDRICAL_SURFACE('',#10420,5.625E-1);
++#10422=ORIENTED_EDGE('',*,*,#5794,.F.);
++#10424=ORIENTED_EDGE('',*,*,#10423,.T.);
++#10426=ORIENTED_EDGE('',*,*,#10425,.T.);
++#10427=ORIENTED_EDGE('',*,*,#10408,.F.);
++#10428=EDGE_LOOP('',(#10422,#10424,#10426,#10427));
++#10429=FACE_OUTER_BOUND('',#10428,.F.);
++#10430=ADVANCED_FACE('',(#10429),#10421,.F.);
++#10431=CARTESIAN_POINT('',(1.8125E0,0.E0,1.95E1));
++#10432=DIRECTION('',(1.E0,0.E0,0.E0));
++#10433=DIRECTION('',(0.E0,0.E0,1.E0));
++#10434=AXIS2_PLACEMENT_3D('',#10431,#10432,#10433);
++#10435=PLANE('',#10434);
++#10436=ORIENTED_EDGE('',*,*,#5792,.F.);
++#10438=ORIENTED_EDGE('',*,*,#10437,.T.);
++#10440=ORIENTED_EDGE('',*,*,#10439,.T.);
++#10441=ORIENTED_EDGE('',*,*,#10423,.F.);
++#10442=EDGE_LOOP('',(#10436,#10438,#10440,#10441));
++#10443=FACE_OUTER_BOUND('',#10442,.F.);
++#10444=ADVANCED_FACE('',(#10443),#10435,.F.);
++#10445=CARTESIAN_POINT('',(1.25E0,0.E0,1.95E1));
++#10446=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10447=DIRECTION('',(1.E0,0.E0,0.E0));
++#10448=AXIS2_PLACEMENT_3D('',#10445,#10446,#10447);
++#10449=CYLINDRICAL_SURFACE('',#10448,5.625E-1);
++#10450=ORIENTED_EDGE('',*,*,#5790,.F.);
++#10451=ORIENTED_EDGE('',*,*,#10412,.T.);
++#10453=ORIENTED_EDGE('',*,*,#10452,.T.);
++#10454=ORIENTED_EDGE('',*,*,#10437,.F.);
++#10455=EDGE_LOOP('',(#10450,#10451,#10453,#10454));
++#10456=FACE_OUTER_BOUND('',#10455,.F.);
++#10457=ADVANCED_FACE('',(#10456),#10449,.F.);
++#10458=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10459=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10460=DIRECTION('',(1.E0,0.E0,0.E0));
++#10461=AXIS2_PLACEMENT_3D('',#10458,#10459,#10460);
++#10462=PLANE('',#10461);
++#10463=ORIENTED_EDGE('',*,*,#10410,.F.);
++#10464=ORIENTED_EDGE('',*,*,#10425,.F.);
++#10465=ORIENTED_EDGE('',*,*,#10439,.F.);
++#10466=ORIENTED_EDGE('',*,*,#10452,.F.);
++#10467=EDGE_LOOP('',(#10463,#10464,#10465,#10466));
++#10468=FACE_OUTER_BOUND('',#10467,.F.);
++#10469=ADVANCED_FACE('',(#10468),#10462,.T.);
++#10470=CARTESIAN_POINT('',(7.5E0,0.E0,8.5E0));
++#10471=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10472=DIRECTION('',(1.E0,0.E0,0.E0));
++#10473=AXIS2_PLACEMENT_3D('',#10470,#10471,#10472);
++#10474=PLANE('',#10473);
++#10475=ORIENTED_EDGE('',*,*,#5798,.F.);
++#10477=ORIENTED_EDGE('',*,*,#10476,.T.);
++#10479=ORIENTED_EDGE('',*,*,#10478,.T.);
++#10481=ORIENTED_EDGE('',*,*,#10480,.F.);
++#10482=EDGE_LOOP('',(#10475,#10477,#10479,#10481));
++#10483=FACE_OUTER_BOUND('',#10482,.F.);
++#10484=ADVANCED_FACE('',(#10483),#10474,.F.);
++#10485=CARTESIAN_POINT('',(7.5E0,0.E0,9.E0));
++#10486=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10487=DIRECTION('',(1.E0,0.E0,0.E0));
++#10488=AXIS2_PLACEMENT_3D('',#10485,#10486,#10487);
++#10489=CYLINDRICAL_SURFACE('',#10488,5.E-1);
++#10490=ORIENTED_EDGE('',*,*,#5804,.F.);
++#10492=ORIENTED_EDGE('',*,*,#10491,.T.);
++#10494=ORIENTED_EDGE('',*,*,#10493,.T.);
++#10495=ORIENTED_EDGE('',*,*,#10476,.F.);
++#10496=EDGE_LOOP('',(#10490,#10492,#10494,#10495));
++#10497=FACE_OUTER_BOUND('',#10496,.F.);
++#10498=ADVANCED_FACE('',(#10497),#10489,.F.);
++#10499=CARTESIAN_POINT('',(1.05E1,0.E0,9.5E0));
++#10500=DIRECTION('',(0.E0,0.E0,1.E0));
++#10501=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10502=AXIS2_PLACEMENT_3D('',#10499,#10500,#10501);
++#10503=PLANE('',#10502);
++#10504=ORIENTED_EDGE('',*,*,#5802,.F.);
++#10506=ORIENTED_EDGE('',*,*,#10505,.T.);
++#10508=ORIENTED_EDGE('',*,*,#10507,.T.);
++#10509=ORIENTED_EDGE('',*,*,#10491,.F.);
++#10510=EDGE_LOOP('',(#10504,#10506,#10508,#10509));
++#10511=FACE_OUTER_BOUND('',#10510,.F.);
++#10512=ADVANCED_FACE('',(#10511),#10503,.F.);
++#10513=CARTESIAN_POINT('',(1.05E1,0.E0,9.E0));
++#10514=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10515=DIRECTION('',(1.E0,0.E0,0.E0));
++#10516=AXIS2_PLACEMENT_3D('',#10513,#10514,#10515);
++#10517=CYLINDRICAL_SURFACE('',#10516,5.E-1);
++#10518=ORIENTED_EDGE('',*,*,#5800,.F.);
++#10519=ORIENTED_EDGE('',*,*,#10480,.T.);
++#10521=ORIENTED_EDGE('',*,*,#10520,.T.);
++#10522=ORIENTED_EDGE('',*,*,#10505,.F.);
++#10523=EDGE_LOOP('',(#10518,#10519,#10521,#10522));
++#10524=FACE_OUTER_BOUND('',#10523,.F.);
++#10525=ADVANCED_FACE('',(#10524),#10517,.F.);
++#10526=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10527=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10528=DIRECTION('',(1.E0,0.E0,0.E0));
++#10529=AXIS2_PLACEMENT_3D('',#10526,#10527,#10528);
++#10530=PLANE('',#10529);
++#10531=ORIENTED_EDGE('',*,*,#10478,.F.);
++#10532=ORIENTED_EDGE('',*,*,#10493,.F.);
++#10533=ORIENTED_EDGE('',*,*,#10507,.F.);
++#10534=ORIENTED_EDGE('',*,*,#10520,.F.);
++#10535=EDGE_LOOP('',(#10531,#10532,#10533,#10534));
++#10536=FACE_OUTER_BOUND('',#10535,.F.);
++#10537=ADVANCED_FACE('',(#10536),#10530,.T.);
++#10538=CARTESIAN_POINT('',(7.5E0,0.E0,1.75625E1));
++#10539=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10540=DIRECTION('',(1.E0,0.E0,0.E0));
++#10541=AXIS2_PLACEMENT_3D('',#10538,#10539,#10540);
++#10542=PLANE('',#10541);
++#10543=ORIENTED_EDGE('',*,*,#5808,.F.);
++#10545=ORIENTED_EDGE('',*,*,#10544,.T.);
++#10547=ORIENTED_EDGE('',*,*,#10546,.T.);
++#10549=ORIENTED_EDGE('',*,*,#10548,.F.);
++#10550=EDGE_LOOP('',(#10543,#10545,#10547,#10549));
++#10551=FACE_OUTER_BOUND('',#10550,.F.);
++#10552=ADVANCED_FACE('',(#10551),#10542,.F.);
++#10553=CARTESIAN_POINT('',(7.5E0,0.E0,1.8E1));
++#10554=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10555=DIRECTION('',(1.E0,0.E0,0.E0));
++#10556=AXIS2_PLACEMENT_3D('',#10553,#10554,#10555);
++#10557=CYLINDRICAL_SURFACE('',#10556,4.375E-1);
++#10558=ORIENTED_EDGE('',*,*,#5814,.F.);
++#10560=ORIENTED_EDGE('',*,*,#10559,.T.);
++#10562=ORIENTED_EDGE('',*,*,#10561,.T.);
++#10563=ORIENTED_EDGE('',*,*,#10544,.F.);
++#10564=EDGE_LOOP('',(#10558,#10560,#10562,#10563));
++#10565=FACE_OUTER_BOUND('',#10564,.F.);
++#10566=ADVANCED_FACE('',(#10565),#10557,.F.);
++#10567=CARTESIAN_POINT('',(1.05E1,0.E0,1.84375E1));
++#10568=DIRECTION('',(0.E0,0.E0,1.E0));
++#10569=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10570=AXIS2_PLACEMENT_3D('',#10567,#10568,#10569);
++#10571=PLANE('',#10570);
++#10572=ORIENTED_EDGE('',*,*,#5812,.F.);
++#10574=ORIENTED_EDGE('',*,*,#10573,.T.);
++#10576=ORIENTED_EDGE('',*,*,#10575,.T.);
++#10577=ORIENTED_EDGE('',*,*,#10559,.F.);
++#10578=EDGE_LOOP('',(#10572,#10574,#10576,#10577));
++#10579=FACE_OUTER_BOUND('',#10578,.F.);
++#10580=ADVANCED_FACE('',(#10579),#10571,.F.);
++#10581=CARTESIAN_POINT('',(1.05E1,0.E0,1.8E1));
++#10582=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10583=DIRECTION('',(1.E0,0.E0,0.E0));
++#10584=AXIS2_PLACEMENT_3D('',#10581,#10582,#10583);
++#10585=CYLINDRICAL_SURFACE('',#10584,4.375E-1);
++#10586=ORIENTED_EDGE('',*,*,#5810,.F.);
++#10587=ORIENTED_EDGE('',*,*,#10548,.T.);
++#10589=ORIENTED_EDGE('',*,*,#10588,.T.);
++#10590=ORIENTED_EDGE('',*,*,#10573,.F.);
++#10591=EDGE_LOOP('',(#10586,#10587,#10589,#10590));
++#10592=FACE_OUTER_BOUND('',#10591,.F.);
++#10593=ADVANCED_FACE('',(#10592),#10585,.F.);
++#10594=CARTESIAN_POINT('',(0.E0,6.875E-1,0.E0));
++#10595=DIRECTION('',(0.E0,-1.E0,0.E0));
++#10596=DIRECTION('',(1.E0,0.E0,0.E0));
++#10597=AXIS2_PLACEMENT_3D('',#10594,#10595,#10596);
++#10598=PLANE('',#10597);
++#10599=ORIENTED_EDGE('',*,*,#10546,.F.);
++#10600=ORIENTED_EDGE('',*,*,#10561,.F.);
++#10601=ORIENTED_EDGE('',*,*,#10575,.F.);
++#10602=ORIENTED_EDGE('',*,*,#10588,.F.);
++#10603=EDGE_LOOP('',(#10599,#10600,#10601,#10602));
++#10604=FACE_OUTER_BOUND('',#10603,.F.);
++#10605=ADVANCED_FACE('',(#10604),#10598,.T.);
++#10606=CARTESIAN_POINT('',(7.5E0,0.E0,3.13125E1));
++#10607=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10608=DIRECTION('',(1.E0,0.E0,0.E0));
++#10609=AXIS2_PLACEMENT_3D('',#10606,#10607,#10608);
++#10610=PLANE('',#10609);
++#10611=ORIENTED_EDGE('',*,*,#5818,.T.);
++#10613=ORIENTED_EDGE('',*,*,#10612,.T.);
++#10615=ORIENTED_EDGE('',*,*,#10614,.F.);
++#10617=ORIENTED_EDGE('',*,*,#10616,.F.);
++#10618=EDGE_LOOP('',(#10611,#10613,#10615,#10617));
++#10619=FACE_OUTER_BOUND('',#10618,.F.);
++#10620=ADVANCED_FACE('',(#10619),#10610,.T.);
++#10621=CARTESIAN_POINT('',(1.05E1,0.E0,3.075E1));
++#10622=DIRECTION('',(0.E0,1.E0,0.E0));
++#10623=DIRECTION('',(1.E0,0.E0,0.E0));
++#10624=AXIS2_PLACEMENT_3D('',#10621,#10622,#10623);
++#10625=CYLINDRICAL_SURFACE('',#10624,5.625E-1);
++#10626=ORIENTED_EDGE('',*,*,#5824,.T.);
++#10628=ORIENTED_EDGE('',*,*,#10627,.T.);
++#10630=ORIENTED_EDGE('',*,*,#10629,.F.);
++#10631=ORIENTED_EDGE('',*,*,#10612,.F.);
++#10632=EDGE_LOOP('',(#10626,#10628,#10630,#10631));
++#10633=FACE_OUTER_BOUND('',#10632,.F.);
++#10634=ADVANCED_FACE('',(#10633),#10625,.F.);
++#10635=CARTESIAN_POINT('',(1.05E1,0.E0,3.01875E1));
++#10636=DIRECTION('',(0.E0,0.E0,1.E0));
++#10637=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10638=AXIS2_PLACEMENT_3D('',#10635,#10636,#10637);
++#10639=PLANE('',#10638);
++#10640=ORIENTED_EDGE('',*,*,#5822,.T.);
++#10642=ORIENTED_EDGE('',*,*,#10641,.T.);
++#10644=ORIENTED_EDGE('',*,*,#10643,.F.);
++#10645=ORIENTED_EDGE('',*,*,#10627,.F.);
++#10646=EDGE_LOOP('',(#10640,#10642,#10644,#10645));
++#10647=FACE_OUTER_BOUND('',#10646,.F.);
++#10648=ADVANCED_FACE('',(#10647),#10639,.T.);
++#10649=CARTESIAN_POINT('',(7.5E0,0.E0,3.075E1));
++#10650=DIRECTION('',(0.E0,1.E0,0.E0));
++#10651=DIRECTION('',(1.E0,0.E0,0.E0));
++#10652=AXIS2_PLACEMENT_3D('',#10649,#10650,#10651);
++#10653=CYLINDRICAL_SURFACE('',#10652,5.625E-1);
++#10654=ORIENTED_EDGE('',*,*,#5820,.T.);
++#10655=ORIENTED_EDGE('',*,*,#10616,.T.);
++#10657=ORIENTED_EDGE('',*,*,#10656,.F.);
++#10658=ORIENTED_EDGE('',*,*,#10641,.F.);
++#10659=EDGE_LOOP('',(#10654,#10655,#10657,#10658));
++#10660=FACE_OUTER_BOUND('',#10659,.F.);
++#10661=ADVANCED_FACE('',(#10660),#10653,.F.);
++#10662=CARTESIAN_POINT('',(0.E0,6.875E-1,3.2E1));
++#10663=DIRECTION('',(0.E0,1.E0,0.E0));
++#10664=DIRECTION('',(1.E0,0.E0,0.E0));
++#10665=AXIS2_PLACEMENT_3D('',#10662,#10663,#10664);
++#10666=PLANE('',#10665);
++#10667=ORIENTED_EDGE('',*,*,#10614,.T.);
++#10668=ORIENTED_EDGE('',*,*,#10629,.T.);
++#10669=ORIENTED_EDGE('',*,*,#10643,.T.);
++#10670=ORIENTED_EDGE('',*,*,#10656,.T.);
++#10671=EDGE_LOOP('',(#10667,#10668,#10669,#10670));
++#10672=FACE_OUTER_BOUND('',#10671,.F.);
++#10673=ADVANCED_FACE('',(#10672),#10666,.F.);
++#10674=CARTESIAN_POINT('',(0.E0,6.875E-1,3.2E1));
++#10675=DIRECTION('',(0.E0,1.E0,0.E0));
++#10676=DIRECTION('',(1.E0,0.E0,0.E0));
++#10677=AXIS2_PLACEMENT_3D('',#10674,#10675,#10676);
++#10678=PLANE('',#10677);
++#10680=ORIENTED_EDGE('',*,*,#10679,.F.);
++#10682=ORIENTED_EDGE('',*,*,#10681,.T.);
++#10684=ORIENTED_EDGE('',*,*,#10683,.T.);
++#10686=ORIENTED_EDGE('',*,*,#10685,.T.);
++#10688=ORIENTED_EDGE('',*,*,#10687,.T.);
++#10689=EDGE_LOOP('',(#10680,#10682,#10684,#10686,#10688));
++#10690=FACE_OUTER_BOUND('',#10689,.F.);
++#10691=ADVANCED_FACE('',(#10690),#10678,.F.);
++#10692=CARTESIAN_POINT('',(1.455736763592E0,-6.642389448824E-2,
++2.742280476768E1));
++#10693=DIRECTION('',(0.E0,1.E0,0.E0));
++#10694=DIRECTION('',(-8.942796313519E-1,0.E0,-4.475085931567E-1));
++#10695=AXIS2_PLACEMENT_3D('',#10692,#10693,#10694);
++#10696=CYLINDRICAL_SURFACE('',#10695,7.5E-1);
++#10698=ORIENTED_EDGE('',*,*,#10697,.F.);
++#10699=ORIENTED_EDGE('',*,*,#5932,.T.);
++#10701=ORIENTED_EDGE('',*,*,#10700,.T.);
++#10702=ORIENTED_EDGE('',*,*,#10679,.T.);
++#10703=EDGE_LOOP('',(#10698,#10699,#10701,#10702));
++#10704=FACE_OUTER_BOUND('',#10703,.F.);
++#10705=ADVANCED_FACE('',(#10704),#10696,.F.);
++#10706=CARTESIAN_POINT('',(1.61E0,0.E0,2.75E1));
++#10707=DIRECTION('',(0.E0,1.E0,0.E0));
++#10708=DIRECTION('',(1.E0,0.E0,0.E0));
++#10709=AXIS2_PLACEMENT_3D('',#10706,#10707,#10708);
++#10710=CYLINDRICAL_SURFACE('',#10709,9.225E-1);
++#10711=ORIENTED_EDGE('',*,*,#10697,.T.);
++#10712=ORIENTED_EDGE('',*,*,#10687,.F.);
++#10714=ORIENTED_EDGE('',*,*,#10713,.F.);
++#10715=ORIENTED_EDGE('',*,*,#5934,.T.);
++#10716=EDGE_LOOP('',(#10711,#10712,#10714,#10715));
++#10717=FACE_OUTER_BOUND('',#10716,.F.);
++#10718=ADVANCED_FACE('',(#10717),#10710,.F.);
++#10719=CARTESIAN_POINT('',(7.5E0,0.E0,2.45E1));
++#10720=DIRECTION('',(0.E0,1.E0,0.E0));
++#10721=DIRECTION('',(1.E0,0.E0,0.E0));
++#10722=AXIS2_PLACEMENT_3D('',#10719,#10720,#10721);
++#10723=CYLINDRICAL_SURFACE('',#10722,5.6875E0);
++#10724=ORIENTED_EDGE('',*,*,#5936,.F.);
++#10725=ORIENTED_EDGE('',*,*,#10713,.T.);
++#10726=ORIENTED_EDGE('',*,*,#10685,.F.);
++#10728=ORIENTED_EDGE('',*,*,#10727,.F.);
++#10729=EDGE_LOOP('',(#10724,#10725,#10726,#10728));
++#10730=FACE_OUTER_BOUND('',#10729,.F.);
++#10731=ADVANCED_FACE('',(#10730),#10723,.T.);
++#10732=CARTESIAN_POINT('',(4.553039342392E0,0.E0,3.035464591145E1));
++#10733=DIRECTION('',(0.E0,1.E0,0.E0));
++#10734=DIRECTION('',(1.E0,0.E0,0.E0));
++#10735=AXIS2_PLACEMENT_3D('',#10732,#10733,#10734);
++#10736=CYLINDRICAL_SURFACE('',#10735,8.669989027347E-1);
++#10737=ORIENTED_EDGE('',*,*,#5938,.T.);
++#10738=ORIENTED_EDGE('',*,*,#10727,.T.);
++#10739=ORIENTED_EDGE('',*,*,#10683,.F.);
++#10741=ORIENTED_EDGE('',*,*,#10740,.F.);
++#10742=EDGE_LOOP('',(#10737,#10738,#10739,#10741));
++#10743=FACE_OUTER_BOUND('',#10742,.F.);
++#10744=ADVANCED_FACE('',(#10743),#10736,.F.);
++#10745=CARTESIAN_POINT('',(6.875E-1,0.E0,2.771522817587E1));
++#10746=DIRECTION('',(7.071067811865E-1,0.E0,-7.071067811865E-1));
++#10747=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#10748=AXIS2_PLACEMENT_3D('',#10745,#10746,#10747);
++#10749=PLANE('',#10748);
++#10750=ORIENTED_EDGE('',*,*,#10700,.F.);
++#10751=ORIENTED_EDGE('',*,*,#5930,.T.);
++#10752=ORIENTED_EDGE('',*,*,#10740,.T.);
++#10753=ORIENTED_EDGE('',*,*,#10681,.F.);
++#10754=EDGE_LOOP('',(#10750,#10751,#10752,#10753));
++#10755=FACE_OUTER_BOUND('',#10754,.F.);
++#10756=ADVANCED_FACE('',(#10755),#10749,.T.);
++#10757=CARTESIAN_POINT('',(1.65E1,0.E0,6.875E-1));
++#10758=DIRECTION('',(0.E0,0.E0,1.E0));
++#10759=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10760=AXIS2_PLACEMENT_3D('',#10757,#10758,#10759);
++#10761=PLANE('',#10760);
++#10762=ORIENTED_EDGE('',*,*,#5828,.T.);
++#10764=ORIENTED_EDGE('',*,*,#10763,.T.);
++#10766=ORIENTED_EDGE('',*,*,#10765,.F.);
++#10768=ORIENTED_EDGE('',*,*,#10767,.F.);
++#10769=EDGE_LOOP('',(#10762,#10764,#10766,#10768));
++#10770=FACE_OUTER_BOUND('',#10769,.F.);
++#10771=ADVANCED_FACE('',(#10770),#10761,.T.);
++#10772=CARTESIAN_POINT('',(1.35E1,0.E0,1.25E0));
++#10773=DIRECTION('',(0.E0,1.E0,0.E0));
++#10774=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10775=AXIS2_PLACEMENT_3D('',#10772,#10773,#10774);
++#10776=CYLINDRICAL_SURFACE('',#10775,5.625E-1);
++#10777=ORIENTED_EDGE('',*,*,#5834,.T.);
++#10779=ORIENTED_EDGE('',*,*,#10778,.T.);
++#10781=ORIENTED_EDGE('',*,*,#10780,.F.);
++#10782=ORIENTED_EDGE('',*,*,#10763,.F.);
++#10783=EDGE_LOOP('',(#10777,#10779,#10781,#10782));
++#10784=FACE_OUTER_BOUND('',#10783,.F.);
++#10785=ADVANCED_FACE('',(#10784),#10776,.F.);
++#10786=CARTESIAN_POINT('',(1.35E1,0.E0,1.8125E0));
++#10787=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10788=DIRECTION('',(1.E0,0.E0,0.E0));
++#10789=AXIS2_PLACEMENT_3D('',#10786,#10787,#10788);
++#10790=PLANE('',#10789);
++#10791=ORIENTED_EDGE('',*,*,#5832,.T.);
++#10793=ORIENTED_EDGE('',*,*,#10792,.T.);
++#10795=ORIENTED_EDGE('',*,*,#10794,.F.);
++#10796=ORIENTED_EDGE('',*,*,#10778,.F.);
++#10797=EDGE_LOOP('',(#10791,#10793,#10795,#10796));
++#10798=FACE_OUTER_BOUND('',#10797,.F.);
++#10799=ADVANCED_FACE('',(#10798),#10790,.T.);
++#10800=CARTESIAN_POINT('',(1.65E1,0.E0,1.25E0));
++#10801=DIRECTION('',(0.E0,1.E0,0.E0));
++#10802=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10803=AXIS2_PLACEMENT_3D('',#10800,#10801,#10802);
++#10804=CYLINDRICAL_SURFACE('',#10803,5.625E-1);
++#10805=ORIENTED_EDGE('',*,*,#5830,.T.);
++#10806=ORIENTED_EDGE('',*,*,#10767,.T.);
++#10808=ORIENTED_EDGE('',*,*,#10807,.F.);
++#10809=ORIENTED_EDGE('',*,*,#10792,.F.);
++#10810=EDGE_LOOP('',(#10805,#10806,#10808,#10809));
++#10811=FACE_OUTER_BOUND('',#10810,.F.);
++#10812=ADVANCED_FACE('',(#10811),#10804,.F.);
++#10813=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#10814=DIRECTION('',(0.E0,1.E0,0.E0));
++#10815=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10816=AXIS2_PLACEMENT_3D('',#10813,#10814,#10815);
++#10817=PLANE('',#10816);
++#10818=ORIENTED_EDGE('',*,*,#10765,.T.);
++#10819=ORIENTED_EDGE('',*,*,#10780,.T.);
++#10820=ORIENTED_EDGE('',*,*,#10794,.T.);
++#10821=ORIENTED_EDGE('',*,*,#10807,.T.);
++#10822=EDGE_LOOP('',(#10818,#10819,#10820,#10821));
++#10823=FACE_OUTER_BOUND('',#10822,.F.);
++#10824=ADVANCED_FACE('',(#10823),#10817,.F.);
++#10825=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#10826=DIRECTION('',(0.E0,1.E0,0.E0));
++#10827=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10828=AXIS2_PLACEMENT_3D('',#10825,#10826,#10827);
++#10829=PLANE('',#10828);
++#10831=ORIENTED_EDGE('',*,*,#10830,.F.);
++#10833=ORIENTED_EDGE('',*,*,#10832,.T.);
++#10835=ORIENTED_EDGE('',*,*,#10834,.T.);
++#10837=ORIENTED_EDGE('',*,*,#10836,.T.);
++#10839=ORIENTED_EDGE('',*,*,#10838,.T.);
++#10840=EDGE_LOOP('',(#10831,#10833,#10835,#10837,#10839));
++#10841=FACE_OUTER_BOUND('',#10840,.F.);
++#10842=ADVANCED_FACE('',(#10841),#10829,.F.);
++#10843=CARTESIAN_POINT('',(2.254426323641E1,-6.642389448824E-2,
++4.577195232320E0));
++#10844=DIRECTION('',(0.E0,1.E0,0.E0));
++#10845=DIRECTION('',(8.942796313519E-1,0.E0,4.475085931567E-1));
++#10846=AXIS2_PLACEMENT_3D('',#10843,#10844,#10845);
++#10847=CYLINDRICAL_SURFACE('',#10846,7.5E-1);
++#10849=ORIENTED_EDGE('',*,*,#10848,.F.);
++#10850=ORIENTED_EDGE('',*,*,#5920,.T.);
++#10852=ORIENTED_EDGE('',*,*,#10851,.T.);
++#10853=ORIENTED_EDGE('',*,*,#10830,.T.);
++#10854=EDGE_LOOP('',(#10849,#10850,#10852,#10853));
++#10855=FACE_OUTER_BOUND('',#10854,.F.);
++#10856=ADVANCED_FACE('',(#10855),#10847,.F.);
++#10857=CARTESIAN_POINT('',(2.239E1,0.E0,4.5E0));
++#10858=DIRECTION('',(0.E0,1.E0,0.E0));
++#10859=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10860=AXIS2_PLACEMENT_3D('',#10857,#10858,#10859);
++#10861=CYLINDRICAL_SURFACE('',#10860,9.225E-1);
++#10862=ORIENTED_EDGE('',*,*,#10848,.T.);
++#10863=ORIENTED_EDGE('',*,*,#10838,.F.);
++#10865=ORIENTED_EDGE('',*,*,#10864,.F.);
++#10866=ORIENTED_EDGE('',*,*,#5922,.T.);
++#10867=EDGE_LOOP('',(#10862,#10863,#10865,#10866));
++#10868=FACE_OUTER_BOUND('',#10867,.F.);
++#10869=ADVANCED_FACE('',(#10868),#10861,.F.);
++#10870=CARTESIAN_POINT('',(1.65E1,0.E0,7.5E0));
++#10871=DIRECTION('',(0.E0,1.E0,0.E0));
++#10872=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10873=AXIS2_PLACEMENT_3D('',#10870,#10871,#10872);
++#10874=CYLINDRICAL_SURFACE('',#10873,5.6875E0);
++#10875=ORIENTED_EDGE('',*,*,#5924,.F.);
++#10876=ORIENTED_EDGE('',*,*,#10864,.T.);
++#10877=ORIENTED_EDGE('',*,*,#10836,.F.);
++#10879=ORIENTED_EDGE('',*,*,#10878,.F.);
++#10880=EDGE_LOOP('',(#10875,#10876,#10877,#10879));
++#10881=FACE_OUTER_BOUND('',#10880,.F.);
++#10882=ADVANCED_FACE('',(#10881),#10874,.T.);
++#10883=CARTESIAN_POINT('',(1.944696065761E1,0.E0,1.645354088550E0));
++#10884=DIRECTION('',(0.E0,1.E0,0.E0));
++#10885=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10886=AXIS2_PLACEMENT_3D('',#10883,#10884,#10885);
++#10887=CYLINDRICAL_SURFACE('',#10886,8.669989027347E-1);
++#10888=ORIENTED_EDGE('',*,*,#5926,.T.);
++#10889=ORIENTED_EDGE('',*,*,#10878,.T.);
++#10890=ORIENTED_EDGE('',*,*,#10834,.F.);
++#10892=ORIENTED_EDGE('',*,*,#10891,.F.);
++#10893=EDGE_LOOP('',(#10888,#10889,#10890,#10892));
++#10894=FACE_OUTER_BOUND('',#10893,.F.);
++#10895=ADVANCED_FACE('',(#10894),#10887,.F.);
++#10896=CARTESIAN_POINT('',(2.33125E1,0.E0,4.284771824132E0));
++#10897=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#10898=DIRECTION('',(-7.071067811865E-1,0.E0,-7.071067811865E-1));
++#10899=AXIS2_PLACEMENT_3D('',#10896,#10897,#10898);
++#10900=PLANE('',#10899);
++#10901=ORIENTED_EDGE('',*,*,#10851,.F.);
++#10902=ORIENTED_EDGE('',*,*,#5918,.T.);
++#10903=ORIENTED_EDGE('',*,*,#10891,.T.);
++#10904=ORIENTED_EDGE('',*,*,#10832,.F.);
++#10905=EDGE_LOOP('',(#10901,#10902,#10903,#10904));
++#10906=FACE_OUTER_BOUND('',#10905,.F.);
++#10907=ADVANCED_FACE('',(#10906),#10900,.T.);
++#10908=CARTESIAN_POINT('',(2.33125E1,0.E0,1.65E1));
++#10909=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10910=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10911=AXIS2_PLACEMENT_3D('',#10908,#10909,#10910);
++#10912=PLANE('',#10911);
++#10913=ORIENTED_EDGE('',*,*,#5838,.T.);
++#10915=ORIENTED_EDGE('',*,*,#10914,.T.);
++#10917=ORIENTED_EDGE('',*,*,#10916,.F.);
++#10919=ORIENTED_EDGE('',*,*,#10918,.F.);
++#10920=EDGE_LOOP('',(#10913,#10915,#10917,#10919));
++#10921=FACE_OUTER_BOUND('',#10920,.F.);
++#10922=ADVANCED_FACE('',(#10921),#10912,.T.);
++#10923=CARTESIAN_POINT('',(2.275E1,0.E0,1.35E1));
++#10924=DIRECTION('',(0.E0,1.E0,0.E0));
++#10925=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10926=AXIS2_PLACEMENT_3D('',#10923,#10924,#10925);
++#10927=CYLINDRICAL_SURFACE('',#10926,5.625E-1);
++#10928=ORIENTED_EDGE('',*,*,#5844,.T.);
++#10930=ORIENTED_EDGE('',*,*,#10929,.T.);
++#10932=ORIENTED_EDGE('',*,*,#10931,.F.);
++#10933=ORIENTED_EDGE('',*,*,#10914,.F.);
++#10934=EDGE_LOOP('',(#10928,#10930,#10932,#10933));
++#10935=FACE_OUTER_BOUND('',#10934,.F.);
++#10936=ADVANCED_FACE('',(#10935),#10927,.F.);
++#10937=CARTESIAN_POINT('',(2.21875E1,0.E0,1.35E1));
++#10938=DIRECTION('',(1.E0,0.E0,0.E0));
++#10939=DIRECTION('',(0.E0,0.E0,1.E0));
++#10940=AXIS2_PLACEMENT_3D('',#10937,#10938,#10939);
++#10941=PLANE('',#10940);
++#10942=ORIENTED_EDGE('',*,*,#5842,.T.);
++#10944=ORIENTED_EDGE('',*,*,#10943,.T.);
++#10946=ORIENTED_EDGE('',*,*,#10945,.F.);
++#10947=ORIENTED_EDGE('',*,*,#10929,.F.);
++#10948=EDGE_LOOP('',(#10942,#10944,#10946,#10947));
++#10949=FACE_OUTER_BOUND('',#10948,.F.);
++#10950=ADVANCED_FACE('',(#10949),#10941,.T.);
++#10951=CARTESIAN_POINT('',(2.275E1,0.E0,1.65E1));
++#10952=DIRECTION('',(0.E0,1.E0,0.E0));
++#10953=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10954=AXIS2_PLACEMENT_3D('',#10951,#10952,#10953);
++#10955=CYLINDRICAL_SURFACE('',#10954,5.625E-1);
++#10956=ORIENTED_EDGE('',*,*,#5840,.T.);
++#10957=ORIENTED_EDGE('',*,*,#10918,.T.);
++#10959=ORIENTED_EDGE('',*,*,#10958,.F.);
++#10960=ORIENTED_EDGE('',*,*,#10943,.F.);
++#10961=EDGE_LOOP('',(#10956,#10957,#10959,#10960));
++#10962=FACE_OUTER_BOUND('',#10961,.F.);
++#10963=ADVANCED_FACE('',(#10962),#10955,.F.);
++#10964=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#10965=DIRECTION('',(0.E0,1.E0,0.E0));
++#10966=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10967=AXIS2_PLACEMENT_3D('',#10964,#10965,#10966);
++#10968=PLANE('',#10967);
++#10969=ORIENTED_EDGE('',*,*,#10916,.T.);
++#10970=ORIENTED_EDGE('',*,*,#10931,.T.);
++#10971=ORIENTED_EDGE('',*,*,#10945,.T.);
++#10972=ORIENTED_EDGE('',*,*,#10958,.T.);
++#10973=EDGE_LOOP('',(#10969,#10970,#10971,#10972));
++#10974=FACE_OUTER_BOUND('',#10973,.F.);
++#10975=ADVANCED_FACE('',(#10974),#10968,.F.);
++#10976=CARTESIAN_POINT('',(2.33125E1,0.E0,2.25E1));
++#10977=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10978=DIRECTION('',(0.E0,0.E0,-1.E0));
++#10979=AXIS2_PLACEMENT_3D('',#10976,#10977,#10978);
++#10980=PLANE('',#10979);
++#10981=ORIENTED_EDGE('',*,*,#5848,.T.);
++#10983=ORIENTED_EDGE('',*,*,#10982,.T.);
++#10985=ORIENTED_EDGE('',*,*,#10984,.F.);
++#10987=ORIENTED_EDGE('',*,*,#10986,.F.);
++#10988=EDGE_LOOP('',(#10981,#10983,#10985,#10987));
++#10989=FACE_OUTER_BOUND('',#10988,.F.);
++#10990=ADVANCED_FACE('',(#10989),#10980,.T.);
++#10991=CARTESIAN_POINT('',(2.275E1,0.E0,1.95E1));
++#10992=DIRECTION('',(0.E0,1.E0,0.E0));
++#10993=DIRECTION('',(-1.E0,0.E0,0.E0));
++#10994=AXIS2_PLACEMENT_3D('',#10991,#10992,#10993);
++#10995=CYLINDRICAL_SURFACE('',#10994,5.625E-1);
++#10996=ORIENTED_EDGE('',*,*,#5854,.T.);
++#10998=ORIENTED_EDGE('',*,*,#10997,.T.);
++#11000=ORIENTED_EDGE('',*,*,#10999,.F.);
++#11001=ORIENTED_EDGE('',*,*,#10982,.F.);
++#11002=EDGE_LOOP('',(#10996,#10998,#11000,#11001));
++#11003=FACE_OUTER_BOUND('',#11002,.F.);
++#11004=ADVANCED_FACE('',(#11003),#10995,.F.);
++#11005=CARTESIAN_POINT('',(2.21875E1,0.E0,1.95E1));
++#11006=DIRECTION('',(1.E0,0.E0,0.E0));
++#11007=DIRECTION('',(0.E0,0.E0,1.E0));
++#11008=AXIS2_PLACEMENT_3D('',#11005,#11006,#11007);
++#11009=PLANE('',#11008);
++#11010=ORIENTED_EDGE('',*,*,#5852,.T.);
++#11012=ORIENTED_EDGE('',*,*,#11011,.T.);
++#11014=ORIENTED_EDGE('',*,*,#11013,.F.);
++#11015=ORIENTED_EDGE('',*,*,#10997,.F.);
++#11016=EDGE_LOOP('',(#11010,#11012,#11014,#11015));
++#11017=FACE_OUTER_BOUND('',#11016,.F.);
++#11018=ADVANCED_FACE('',(#11017),#11009,.T.);
++#11019=CARTESIAN_POINT('',(2.275E1,0.E0,2.25E1));
++#11020=DIRECTION('',(0.E0,1.E0,0.E0));
++#11021=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11022=AXIS2_PLACEMENT_3D('',#11019,#11020,#11021);
++#11023=CYLINDRICAL_SURFACE('',#11022,5.625E-1);
++#11024=ORIENTED_EDGE('',*,*,#5850,.T.);
++#11025=ORIENTED_EDGE('',*,*,#10986,.T.);
++#11027=ORIENTED_EDGE('',*,*,#11026,.F.);
++#11028=ORIENTED_EDGE('',*,*,#11011,.F.);
++#11029=EDGE_LOOP('',(#11024,#11025,#11027,#11028));
++#11030=FACE_OUTER_BOUND('',#11029,.F.);
++#11031=ADVANCED_FACE('',(#11030),#11023,.F.);
++#11032=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#11033=DIRECTION('',(0.E0,1.E0,0.E0));
++#11034=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11035=AXIS2_PLACEMENT_3D('',#11032,#11033,#11034);
++#11036=PLANE('',#11035);
++#11037=ORIENTED_EDGE('',*,*,#10984,.T.);
++#11038=ORIENTED_EDGE('',*,*,#10999,.T.);
++#11039=ORIENTED_EDGE('',*,*,#11013,.T.);
++#11040=ORIENTED_EDGE('',*,*,#11026,.T.);
++#11041=EDGE_LOOP('',(#11037,#11038,#11039,#11040));
++#11042=FACE_OUTER_BOUND('',#11041,.F.);
++#11043=ADVANCED_FACE('',(#11042),#11036,.F.);
++#11044=CARTESIAN_POINT('',(1.65E1,0.E0,8.5E0));
++#11045=DIRECTION('',(0.E0,0.E0,1.E0));
++#11046=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11047=AXIS2_PLACEMENT_3D('',#11044,#11045,#11046);
++#11048=PLANE('',#11047);
++#11049=ORIENTED_EDGE('',*,*,#5858,.T.);
++#11051=ORIENTED_EDGE('',*,*,#11050,.T.);
++#11053=ORIENTED_EDGE('',*,*,#11052,.F.);
++#11055=ORIENTED_EDGE('',*,*,#11054,.F.);
++#11056=EDGE_LOOP('',(#11049,#11051,#11053,#11055));
++#11057=FACE_OUTER_BOUND('',#11056,.F.);
++#11058=ADVANCED_FACE('',(#11057),#11048,.T.);
++#11059=CARTESIAN_POINT('',(1.35E1,0.E0,9.E0));
++#11060=DIRECTION('',(0.E0,1.E0,0.E0));
++#11061=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11062=AXIS2_PLACEMENT_3D('',#11059,#11060,#11061);
++#11063=CYLINDRICAL_SURFACE('',#11062,5.E-1);
++#11064=ORIENTED_EDGE('',*,*,#5864,.T.);
++#11066=ORIENTED_EDGE('',*,*,#11065,.T.);
++#11068=ORIENTED_EDGE('',*,*,#11067,.F.);
++#11069=ORIENTED_EDGE('',*,*,#11050,.F.);
++#11070=EDGE_LOOP('',(#11064,#11066,#11068,#11069));
++#11071=FACE_OUTER_BOUND('',#11070,.F.);
++#11072=ADVANCED_FACE('',(#11071),#11063,.F.);
++#11073=CARTESIAN_POINT('',(1.35E1,0.E0,9.5E0));
++#11074=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11075=DIRECTION('',(1.E0,0.E0,0.E0));
++#11076=AXIS2_PLACEMENT_3D('',#11073,#11074,#11075);
++#11077=PLANE('',#11076);
++#11078=ORIENTED_EDGE('',*,*,#5862,.T.);
++#11080=ORIENTED_EDGE('',*,*,#11079,.T.);
++#11082=ORIENTED_EDGE('',*,*,#11081,.F.);
++#11083=ORIENTED_EDGE('',*,*,#11065,.F.);
++#11084=EDGE_LOOP('',(#11078,#11080,#11082,#11083));
++#11085=FACE_OUTER_BOUND('',#11084,.F.);
++#11086=ADVANCED_FACE('',(#11085),#11077,.T.);
++#11087=CARTESIAN_POINT('',(1.65E1,0.E0,9.E0));
++#11088=DIRECTION('',(0.E0,1.E0,0.E0));
++#11089=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11090=AXIS2_PLACEMENT_3D('',#11087,#11088,#11089);
++#11091=CYLINDRICAL_SURFACE('',#11090,5.E-1);
++#11092=ORIENTED_EDGE('',*,*,#5860,.T.);
++#11093=ORIENTED_EDGE('',*,*,#11054,.T.);
++#11095=ORIENTED_EDGE('',*,*,#11094,.F.);
++#11096=ORIENTED_EDGE('',*,*,#11079,.F.);
++#11097=EDGE_LOOP('',(#11092,#11093,#11095,#11096));
++#11098=FACE_OUTER_BOUND('',#11097,.F.);
++#11099=ADVANCED_FACE('',(#11098),#11091,.F.);
++#11100=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#11101=DIRECTION('',(0.E0,1.E0,0.E0));
++#11102=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11103=AXIS2_PLACEMENT_3D('',#11100,#11101,#11102);
++#11104=PLANE('',#11103);
++#11105=ORIENTED_EDGE('',*,*,#11052,.T.);
++#11106=ORIENTED_EDGE('',*,*,#11067,.T.);
++#11107=ORIENTED_EDGE('',*,*,#11081,.T.);
++#11108=ORIENTED_EDGE('',*,*,#11094,.T.);
++#11109=EDGE_LOOP('',(#11105,#11106,#11107,#11108));
++#11110=FACE_OUTER_BOUND('',#11109,.F.);
++#11111=ADVANCED_FACE('',(#11110),#11104,.F.);
++#11112=CARTESIAN_POINT('',(1.65E1,0.E0,1.75625E1));
++#11113=DIRECTION('',(0.E0,0.E0,1.E0));
++#11114=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11115=AXIS2_PLACEMENT_3D('',#11112,#11113,#11114);
++#11116=PLANE('',#11115);
++#11117=ORIENTED_EDGE('',*,*,#5868,.T.);
++#11119=ORIENTED_EDGE('',*,*,#11118,.T.);
++#11121=ORIENTED_EDGE('',*,*,#11120,.F.);
++#11123=ORIENTED_EDGE('',*,*,#11122,.F.);
++#11124=EDGE_LOOP('',(#11117,#11119,#11121,#11123));
++#11125=FACE_OUTER_BOUND('',#11124,.F.);
++#11126=ADVANCED_FACE('',(#11125),#11116,.T.);
++#11127=CARTESIAN_POINT('',(1.35E1,0.E0,1.8E1));
++#11128=DIRECTION('',(0.E0,1.E0,0.E0));
++#11129=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11130=AXIS2_PLACEMENT_3D('',#11127,#11128,#11129);
++#11131=CYLINDRICAL_SURFACE('',#11130,4.375E-1);
++#11132=ORIENTED_EDGE('',*,*,#5874,.T.);
++#11134=ORIENTED_EDGE('',*,*,#11133,.T.);
++#11136=ORIENTED_EDGE('',*,*,#11135,.F.);
++#11137=ORIENTED_EDGE('',*,*,#11118,.F.);
++#11138=EDGE_LOOP('',(#11132,#11134,#11136,#11137));
++#11139=FACE_OUTER_BOUND('',#11138,.F.);
++#11140=ADVANCED_FACE('',(#11139),#11131,.F.);
++#11141=CARTESIAN_POINT('',(1.35E1,0.E0,1.84375E1));
++#11142=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11143=DIRECTION('',(1.E0,0.E0,0.E0));
++#11144=AXIS2_PLACEMENT_3D('',#11141,#11142,#11143);
++#11145=PLANE('',#11144);
++#11146=ORIENTED_EDGE('',*,*,#5872,.T.);
++#11148=ORIENTED_EDGE('',*,*,#11147,.T.);
++#11150=ORIENTED_EDGE('',*,*,#11149,.F.);
++#11151=ORIENTED_EDGE('',*,*,#11133,.F.);
++#11152=EDGE_LOOP('',(#11146,#11148,#11150,#11151));
++#11153=FACE_OUTER_BOUND('',#11152,.F.);
++#11154=ADVANCED_FACE('',(#11153),#11145,.T.);
++#11155=CARTESIAN_POINT('',(1.65E1,0.E0,1.8E1));
++#11156=DIRECTION('',(0.E0,1.E0,0.E0));
++#11157=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11158=AXIS2_PLACEMENT_3D('',#11155,#11156,#11157);
++#11159=CYLINDRICAL_SURFACE('',#11158,4.375E-1);
++#11160=ORIENTED_EDGE('',*,*,#5870,.T.);
++#11161=ORIENTED_EDGE('',*,*,#11122,.T.);
++#11163=ORIENTED_EDGE('',*,*,#11162,.F.);
++#11164=ORIENTED_EDGE('',*,*,#11147,.F.);
++#11165=EDGE_LOOP('',(#11160,#11161,#11163,#11164));
++#11166=FACE_OUTER_BOUND('',#11165,.F.);
++#11167=ADVANCED_FACE('',(#11166),#11159,.F.);
++#11168=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#11169=DIRECTION('',(0.E0,1.E0,0.E0));
++#11170=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11171=AXIS2_PLACEMENT_3D('',#11168,#11169,#11170);
++#11172=PLANE('',#11171);
++#11173=ORIENTED_EDGE('',*,*,#11120,.T.);
++#11174=ORIENTED_EDGE('',*,*,#11135,.T.);
++#11175=ORIENTED_EDGE('',*,*,#11149,.T.);
++#11176=ORIENTED_EDGE('',*,*,#11162,.T.);
++#11177=EDGE_LOOP('',(#11173,#11174,#11175,#11176));
++#11178=FACE_OUTER_BOUND('',#11177,.F.);
++#11179=ADVANCED_FACE('',(#11178),#11172,.F.);
++#11180=CARTESIAN_POINT('',(1.65E1,0.E0,3.13125E1));
++#11181=DIRECTION('',(0.E0,0.E0,1.E0));
++#11182=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11183=AXIS2_PLACEMENT_3D('',#11180,#11181,#11182);
++#11184=PLANE('',#11183);
++#11185=ORIENTED_EDGE('',*,*,#5878,.F.);
++#11187=ORIENTED_EDGE('',*,*,#11186,.T.);
++#11189=ORIENTED_EDGE('',*,*,#11188,.T.);
++#11191=ORIENTED_EDGE('',*,*,#11190,.F.);
++#11192=EDGE_LOOP('',(#11185,#11187,#11189,#11191));
++#11193=FACE_OUTER_BOUND('',#11192,.F.);
++#11194=ADVANCED_FACE('',(#11193),#11184,.F.);
++#11195=CARTESIAN_POINT('',(1.65E1,0.E0,3.075E1));
++#11196=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11197=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11198=AXIS2_PLACEMENT_3D('',#11195,#11196,#11197);
++#11199=CYLINDRICAL_SURFACE('',#11198,5.625E-1);
++#11200=ORIENTED_EDGE('',*,*,#5884,.F.);
++#11202=ORIENTED_EDGE('',*,*,#11201,.T.);
++#11204=ORIENTED_EDGE('',*,*,#11203,.T.);
++#11205=ORIENTED_EDGE('',*,*,#11186,.F.);
++#11206=EDGE_LOOP('',(#11200,#11202,#11204,#11205));
++#11207=FACE_OUTER_BOUND('',#11206,.F.);
++#11208=ADVANCED_FACE('',(#11207),#11199,.F.);
++#11209=CARTESIAN_POINT('',(1.35E1,0.E0,3.01875E1));
++#11210=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11211=DIRECTION('',(1.E0,0.E0,0.E0));
++#11212=AXIS2_PLACEMENT_3D('',#11209,#11210,#11211);
++#11213=PLANE('',#11212);
++#11214=ORIENTED_EDGE('',*,*,#5882,.F.);
++#11216=ORIENTED_EDGE('',*,*,#11215,.T.);
++#11218=ORIENTED_EDGE('',*,*,#11217,.T.);
++#11219=ORIENTED_EDGE('',*,*,#11201,.F.);
++#11220=EDGE_LOOP('',(#11214,#11216,#11218,#11219));
++#11221=FACE_OUTER_BOUND('',#11220,.F.);
++#11222=ADVANCED_FACE('',(#11221),#11213,.F.);
++#11223=CARTESIAN_POINT('',(1.35E1,0.E0,3.075E1));
++#11224=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11225=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11226=AXIS2_PLACEMENT_3D('',#11223,#11224,#11225);
++#11227=CYLINDRICAL_SURFACE('',#11226,5.625E-1);
++#11228=ORIENTED_EDGE('',*,*,#5880,.F.);
++#11229=ORIENTED_EDGE('',*,*,#11190,.T.);
++#11231=ORIENTED_EDGE('',*,*,#11230,.T.);
++#11232=ORIENTED_EDGE('',*,*,#11215,.F.);
++#11233=EDGE_LOOP('',(#11228,#11229,#11231,#11232));
++#11234=FACE_OUTER_BOUND('',#11233,.F.);
++#11235=ADVANCED_FACE('',(#11234),#11227,.F.);
++#11236=CARTESIAN_POINT('',(2.4E1,6.875E-1,3.2E1));
++#11237=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11238=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11239=AXIS2_PLACEMENT_3D('',#11236,#11237,#11238);
++#11240=PLANE('',#11239);
++#11241=ORIENTED_EDGE('',*,*,#11188,.F.);
++#11242=ORIENTED_EDGE('',*,*,#11203,.F.);
++#11243=ORIENTED_EDGE('',*,*,#11217,.F.);
++#11244=ORIENTED_EDGE('',*,*,#11230,.F.);
++#11245=EDGE_LOOP('',(#11241,#11242,#11243,#11244));
++#11246=FACE_OUTER_BOUND('',#11245,.F.);
++#11247=ADVANCED_FACE('',(#11246),#11240,.T.);
++#11248=CARTESIAN_POINT('',(2.4E1,6.875E-1,3.2E1));
++#11249=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11250=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11251=AXIS2_PLACEMENT_3D('',#11248,#11249,#11250);
++#11252=PLANE('',#11251);
++#11254=ORIENTED_EDGE('',*,*,#11253,.F.);
++#11256=ORIENTED_EDGE('',*,*,#11255,.F.);
++#11258=ORIENTED_EDGE('',*,*,#11257,.F.);
++#11260=ORIENTED_EDGE('',*,*,#11259,.F.);
++#11262=ORIENTED_EDGE('',*,*,#11261,.F.);
++#11263=EDGE_LOOP('',(#11254,#11256,#11258,#11260,#11262));
++#11264=FACE_OUTER_BOUND('',#11263,.F.);
++#11265=ADVANCED_FACE('',(#11264),#11252,.T.);
++#11266=CARTESIAN_POINT('',(2.254426323641E1,-6.892397422826E-2,
++2.742280476768E1));
++#11267=DIRECTION('',(0.E0,1.E0,0.E0));
++#11268=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#11269=AXIS2_PLACEMENT_3D('',#11266,#11267,#11268);
++#11270=CYLINDRICAL_SURFACE('',#11269,7.5E-1);
++#11272=ORIENTED_EDGE('',*,*,#11271,.F.);
++#11273=ORIENTED_EDGE('',*,*,#5944,.T.);
++#11275=ORIENTED_EDGE('',*,*,#11274,.T.);
++#11276=ORIENTED_EDGE('',*,*,#11253,.T.);
++#11277=EDGE_LOOP('',(#11272,#11273,#11275,#11276));
++#11278=FACE_OUTER_BOUND('',#11277,.F.);
++#11279=ADVANCED_FACE('',(#11278),#11270,.F.);
++#11280=CARTESIAN_POINT('',(2.33125E1,0.E0,2.771522817587E1));
++#11281=DIRECTION('',(7.071067811865E-1,0.E0,7.071067811865E-1));
++#11282=DIRECTION('',(-7.071067811865E-1,0.E0,7.071067811865E-1));
++#11283=AXIS2_PLACEMENT_3D('',#11280,#11281,#11282);
++#11284=PLANE('',#11283);
++#11285=ORIENTED_EDGE('',*,*,#11271,.T.);
++#11286=ORIENTED_EDGE('',*,*,#11261,.T.);
++#11288=ORIENTED_EDGE('',*,*,#11287,.F.);
++#11289=ORIENTED_EDGE('',*,*,#5946,.F.);
++#11290=EDGE_LOOP('',(#11285,#11286,#11288,#11289));
++#11291=FACE_OUTER_BOUND('',#11290,.F.);
++#11292=ADVANCED_FACE('',(#11291),#11284,.F.);
++#11293=CARTESIAN_POINT('',(1.944696065761E1,0.E0,3.035464591145E1));
++#11294=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11295=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11296=AXIS2_PLACEMENT_3D('',#11293,#11294,#11295);
++#11297=CYLINDRICAL_SURFACE('',#11296,8.669989027347E-1);
++#11298=ORIENTED_EDGE('',*,*,#5948,.F.);
++#11299=ORIENTED_EDGE('',*,*,#11287,.T.);
++#11300=ORIENTED_EDGE('',*,*,#11259,.T.);
++#11302=ORIENTED_EDGE('',*,*,#11301,.F.);
++#11303=EDGE_LOOP('',(#11298,#11299,#11300,#11302));
++#11304=FACE_OUTER_BOUND('',#11303,.F.);
++#11305=ADVANCED_FACE('',(#11304),#11297,.F.);
++#11306=CARTESIAN_POINT('',(1.65E1,0.E0,2.45E1));
++#11307=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11308=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11309=AXIS2_PLACEMENT_3D('',#11306,#11307,#11308);
++#11310=CYLINDRICAL_SURFACE('',#11309,5.6875E0);
++#11311=ORIENTED_EDGE('',*,*,#5950,.T.);
++#11312=ORIENTED_EDGE('',*,*,#11301,.T.);
++#11313=ORIENTED_EDGE('',*,*,#11257,.T.);
++#11315=ORIENTED_EDGE('',*,*,#11314,.F.);
++#11316=EDGE_LOOP('',(#11311,#11312,#11313,#11315));
++#11317=FACE_OUTER_BOUND('',#11316,.F.);
++#11318=ADVANCED_FACE('',(#11317),#11310,.T.);
++#11319=CARTESIAN_POINT('',(2.239E1,0.E0,2.75E1));
++#11320=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11321=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11322=AXIS2_PLACEMENT_3D('',#11319,#11320,#11321);
++#11323=CYLINDRICAL_SURFACE('',#11322,9.225E-1);
++#11324=ORIENTED_EDGE('',*,*,#11274,.F.);
++#11325=ORIENTED_EDGE('',*,*,#5942,.F.);
++#11326=ORIENTED_EDGE('',*,*,#11314,.T.);
++#11327=ORIENTED_EDGE('',*,*,#11255,.T.);
++#11328=EDGE_LOOP('',(#11324,#11325,#11326,#11327));
++#11329=FACE_OUTER_BOUND('',#11328,.F.);
++#11330=ADVANCED_FACE('',(#11329),#11323,.F.);
++#11331=CARTESIAN_POINT('',(2.13075E1,-6.892397422826E-2,7.81E0));
++#11332=DIRECTION('',(0.E0,1.E0,0.E0));
++#11333=DIRECTION('',(0.E0,0.E0,1.E0));
++#11334=AXIS2_PLACEMENT_3D('',#11331,#11332,#11333);
++#11335=CYLINDRICAL_SURFACE('',#11334,8.8E-1);
++#11337=ORIENTED_EDGE('',*,*,#11336,.T.);
++#11339=ORIENTED_EDGE('',*,*,#11338,.T.);
++#11341=ORIENTED_EDGE('',*,*,#11340,.F.);
++#11342=ORIENTED_EDGE('',*,*,#5888,.T.);
++#11343=EDGE_LOOP('',(#11337,#11339,#11341,#11342));
++#11344=FACE_OUTER_BOUND('',#11343,.F.);
++#11345=ADVANCED_FACE('',(#11344),#11335,.T.);
++#11346=CARTESIAN_POINT('',(2.21875E1,0.E0,8.69E0));
++#11347=DIRECTION('',(0.E0,0.E0,1.E0));
++#11348=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11349=AXIS2_PLACEMENT_3D('',#11346,#11347,#11348);
++#11350=PLANE('',#11349);
++#11351=ORIENTED_EDGE('',*,*,#11336,.F.);
++#11352=ORIENTED_EDGE('',*,*,#5914,.T.);
++#11354=ORIENTED_EDGE('',*,*,#11353,.F.);
++#11356=ORIENTED_EDGE('',*,*,#11355,.F.);
++#11357=EDGE_LOOP('',(#11351,#11352,#11354,#11356));
++#11358=FACE_OUTER_BOUND('',#11357,.F.);
++#11359=ADVANCED_FACE('',(#11358),#11350,.T.);
++#11360=CARTESIAN_POINT('',(2.05675E1,7.463919417831E-1,9.57E0));
++#11361=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11362=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11363=AXIS2_PLACEMENT_3D('',#11360,#11361,#11362);
++#11364=CYLINDRICAL_SURFACE('',#11363,8.8E-1);
++#11366=ORIENTED_EDGE('',*,*,#11365,.F.);
++#11368=ORIENTED_EDGE('',*,*,#11367,.T.);
++#11369=ORIENTED_EDGE('',*,*,#11353,.T.);
++#11370=ORIENTED_EDGE('',*,*,#5912,.T.);
++#11371=EDGE_LOOP('',(#11366,#11368,#11369,#11370));
++#11372=FACE_OUTER_BOUND('',#11371,.F.);
++#11373=ADVANCED_FACE('',(#11372),#11364,.F.);
++#11374=CARTESIAN_POINT('',(1.96875E1,0.E0,8.69E0));
++#11375=DIRECTION('',(1.E0,0.E0,0.E0));
++#11376=DIRECTION('',(0.E0,0.E0,1.E0));
++#11377=AXIS2_PLACEMENT_3D('',#11374,#11375,#11376);
++#11378=PLANE('',#11377);
++#11379=ORIENTED_EDGE('',*,*,#11365,.T.);
++#11380=ORIENTED_EDGE('',*,*,#5910,.T.);
++#11382=ORIENTED_EDGE('',*,*,#11381,.F.);
++#11384=ORIENTED_EDGE('',*,*,#11383,.F.);
++#11385=EDGE_LOOP('',(#11379,#11380,#11382,#11384));
++#11386=FACE_OUTER_BOUND('',#11385,.F.);
++#11387=ADVANCED_FACE('',(#11386),#11378,.T.);
++#11388=CARTESIAN_POINT('',(2.05675E1,7.463919417831E-1,1.037E1));
++#11389=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11390=DIRECTION('',(0.E0,0.E0,1.E0));
++#11391=AXIS2_PLACEMENT_3D('',#11388,#11389,#11390);
++#11392=CYLINDRICAL_SURFACE('',#11391,8.8E-1);
++#11394=ORIENTED_EDGE('',*,*,#11393,.F.);
++#11396=ORIENTED_EDGE('',*,*,#11395,.T.);
++#11397=ORIENTED_EDGE('',*,*,#11381,.T.);
++#11398=ORIENTED_EDGE('',*,*,#5908,.T.);
++#11399=EDGE_LOOP('',(#11394,#11396,#11397,#11398));
++#11400=FACE_OUTER_BOUND('',#11399,.F.);
++#11401=ADVANCED_FACE('',(#11400),#11392,.F.);
++#11402=CARTESIAN_POINT('',(1.96875E1,0.E0,1.125E1));
++#11403=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11404=DIRECTION('',(1.E0,0.E0,0.E0));
++#11405=AXIS2_PLACEMENT_3D('',#11402,#11403,#11404);
++#11406=PLANE('',#11405);
++#11407=ORIENTED_EDGE('',*,*,#11393,.T.);
++#11408=ORIENTED_EDGE('',*,*,#5906,.T.);
++#11410=ORIENTED_EDGE('',*,*,#11409,.F.);
++#11412=ORIENTED_EDGE('',*,*,#11411,.F.);
++#11413=EDGE_LOOP('',(#11407,#11408,#11410,#11412));
++#11414=FACE_OUTER_BOUND('',#11413,.F.);
++#11415=ADVANCED_FACE('',(#11414),#11406,.T.);
++#11416=CARTESIAN_POINT('',(2.44325E1,7.463919417831E-1,1.037E1));
++#11417=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11418=DIRECTION('',(1.E0,0.E0,0.E0));
++#11419=AXIS2_PLACEMENT_3D('',#11416,#11417,#11418);
++#11420=CYLINDRICAL_SURFACE('',#11419,8.8E-1);
++#11422=ORIENTED_EDGE('',*,*,#11421,.F.);
++#11424=ORIENTED_EDGE('',*,*,#11423,.T.);
++#11425=ORIENTED_EDGE('',*,*,#11409,.T.);
++#11426=ORIENTED_EDGE('',*,*,#5904,.T.);
++#11427=EDGE_LOOP('',(#11422,#11424,#11425,#11426));
++#11428=FACE_OUTER_BOUND('',#11427,.F.);
++#11429=ADVANCED_FACE('',(#11428),#11420,.F.);
++#11430=CARTESIAN_POINT('',(2.53125E1,0.E0,1.125E1));
++#11431=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11432=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11433=AXIS2_PLACEMENT_3D('',#11430,#11431,#11432);
++#11434=PLANE('',#11433);
++#11436=ORIENTED_EDGE('',*,*,#11435,.F.);
++#11438=ORIENTED_EDGE('',*,*,#11437,.F.);
++#11439=ORIENTED_EDGE('',*,*,#11421,.T.);
++#11440=ORIENTED_EDGE('',*,*,#5902,.T.);
++#11441=EDGE_LOOP('',(#11436,#11438,#11439,#11440));
++#11442=FACE_OUTER_BOUND('',#11441,.F.);
++#11443=ADVANCED_FACE('',(#11442),#11434,.T.);
++#11444=CARTESIAN_POINT('',(2.44325E1,7.463919417831E-1,9.57E0));
++#11445=DIRECTION('',(0.E0,-1.E0,0.E0));
++#11446=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11447=AXIS2_PLACEMENT_3D('',#11444,#11445,#11446);
++#11448=CYLINDRICAL_SURFACE('',#11447,8.8E-1);
++#11450=ORIENTED_EDGE('',*,*,#11449,.F.);
++#11452=ORIENTED_EDGE('',*,*,#11451,.T.);
++#11453=ORIENTED_EDGE('',*,*,#11435,.T.);
++#11454=ORIENTED_EDGE('',*,*,#5900,.T.);
++#11455=EDGE_LOOP('',(#11450,#11452,#11453,#11454));
++#11456=FACE_OUTER_BOUND('',#11455,.F.);
++#11457=ADVANCED_FACE('',(#11456),#11448,.F.);
++#11458=CARTESIAN_POINT('',(2.53125E1,0.E0,8.69E0));
++#11459=DIRECTION('',(0.E0,0.E0,1.E0));
++#11460=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11461=AXIS2_PLACEMENT_3D('',#11458,#11459,#11460);
++#11462=PLANE('',#11461);
++#11464=ORIENTED_EDGE('',*,*,#11463,.T.);
++#11466=ORIENTED_EDGE('',*,*,#11465,.F.);
++#11467=ORIENTED_EDGE('',*,*,#11449,.T.);
++#11468=ORIENTED_EDGE('',*,*,#5898,.T.);
++#11469=EDGE_LOOP('',(#11464,#11466,#11467,#11468));
++#11470=FACE_OUTER_BOUND('',#11469,.F.);
++#11471=ADVANCED_FACE('',(#11470),#11462,.T.);
++#11472=CARTESIAN_POINT('',(2.419E1,-6.892397422826E-2,7.81E0));
++#11473=DIRECTION('',(0.E0,1.E0,0.E0));
++#11474=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11475=AXIS2_PLACEMENT_3D('',#11472,#11473,#11474);
++#11476=CYLINDRICAL_SURFACE('',#11475,8.8E-1);
++#11478=ORIENTED_EDGE('',*,*,#11477,.T.);
++#11480=ORIENTED_EDGE('',*,*,#11479,.T.);
++#11481=ORIENTED_EDGE('',*,*,#11463,.F.);
++#11482=ORIENTED_EDGE('',*,*,#5896,.T.);
++#11483=EDGE_LOOP('',(#11478,#11480,#11481,#11482));
++#11484=FACE_OUTER_BOUND('',#11483,.F.);
++#11485=ADVANCED_FACE('',(#11484),#11476,.T.);
++#11486=CARTESIAN_POINT('',(2.331E1,0.E0,8.69E0));
++#11487=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11488=DIRECTION('',(0.E0,0.E0,-1.E0));
++#11489=AXIS2_PLACEMENT_3D('',#11486,#11487,#11488);
++#11490=PLANE('',#11489);
++#11491=ORIENTED_EDGE('',*,*,#11477,.F.);
++#11492=ORIENTED_EDGE('',*,*,#5894,.T.);
++#11494=ORIENTED_EDGE('',*,*,#11493,.T.);
++#11496=ORIENTED_EDGE('',*,*,#11495,.F.);
++#11497=EDGE_LOOP('',(#11491,#11492,#11494,#11496));
++#11498=FACE_OUTER_BOUND('',#11497,.F.);
++#11499=ADVANCED_FACE('',(#11498),#11490,.T.);
++#11500=CARTESIAN_POINT('',(2.274875E1,0.E0,7.5E0));
++#11501=DIRECTION('',(0.E0,1.E0,0.E0));
++#11502=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11503=AXIS2_PLACEMENT_3D('',#11500,#11501,#11502);
++#11504=CYLINDRICAL_SURFACE('',#11503,5.6125E-1);
++#11505=ORIENTED_EDGE('',*,*,#5892,.T.);
++#11507=ORIENTED_EDGE('',*,*,#11506,.T.);
++#11509=ORIENTED_EDGE('',*,*,#11508,.F.);
++#11510=ORIENTED_EDGE('',*,*,#11493,.F.);
++#11511=EDGE_LOOP('',(#11505,#11507,#11509,#11510));
++#11512=FACE_OUTER_BOUND('',#11511,.F.);
++#11513=ADVANCED_FACE('',(#11512),#11504,.F.);
++#11514=CARTESIAN_POINT('',(2.21875E1,0.E0,7.5E0));
++#11515=DIRECTION('',(1.E0,0.E0,0.E0));
++#11516=DIRECTION('',(0.E0,0.E0,1.E0));
++#11517=AXIS2_PLACEMENT_3D('',#11514,#11515,#11516);
++#11518=PLANE('',#11517);
++#11519=ORIENTED_EDGE('',*,*,#11340,.T.);
++#11521=ORIENTED_EDGE('',*,*,#11520,.F.);
++#11522=ORIENTED_EDGE('',*,*,#11506,.F.);
++#11523=ORIENTED_EDGE('',*,*,#5890,.T.);
++#11524=EDGE_LOOP('',(#11519,#11521,#11522,#11523));
++#11525=FACE_OUTER_BOUND('',#11524,.F.);
++#11526=ADVANCED_FACE('',(#11525),#11518,.T.);
++#11527=CARTESIAN_POINT('',(2.4E1,6.875E-1,0.E0));
++#11528=DIRECTION('',(0.E0,1.E0,0.E0));
++#11529=DIRECTION('',(-1.E0,0.E0,0.E0));
++#11530=AXIS2_PLACEMENT_3D('',#11527,#11528,#11529);
++#11531=PLANE('',#11530);
++#11532=ORIENTED_EDGE('',*,*,#11465,.T.);
++#11533=ORIENTED_EDGE('',*,*,#11479,.F.);
++#11534=ORIENTED_EDGE('',*,*,#11495,.T.);
++#11535=ORIENTED_EDGE('',*,*,#11508,.T.);
++#11536=ORIENTED_EDGE('',*,*,#11520,.T.);
++#11537=ORIENTED_EDGE('',*,*,#11338,.F.);
++#11538=ORIENTED_EDGE('',*,*,#11355,.T.);
++#11539=ORIENTED_EDGE('',*,*,#11367,.F.);
++#11540=ORIENTED_EDGE('',*,*,#11383,.T.);
++#11541=ORIENTED_EDGE('',*,*,#11395,.F.);
++#11542=ORIENTED_EDGE('',*,*,#11411,.T.);
++#11543=ORIENTED_EDGE('',*,*,#11423,.F.);
++#11544=ORIENTED_EDGE('',*,*,#11437,.T.);
++#11545=ORIENTED_EDGE('',*,*,#11451,.F.);
++#11546=EDGE_LOOP('',(#11532,#11533,#11534,#11535,#11536,#11537,#11538,#11539,
++#11540,#11541,#11542,#11543,#11544,#11545));
++#11547=FACE_OUTER_BOUND('',#11546,.F.);
++#11548=ADVANCED_FACE('',(#11547),#11531,.F.);
++#11549=CLOSED_SHELL('',(#5954,#6079,#6094,#6107,#6117,#6132,#6145,#6201,#6214,
++#6278,#6488,#6503,#6516,#6529,#6540,#6555,#6568,#6581,#6592,#6605,#6618,#6631,
++#6644,#6656,#6669,#6683,#6696,#6709,#6723,#6736,#6749,#6763,#6776,#6789,#6802,
++#6815,#6828,#6842,#6855,#6868,#6880,#6893,#6906,#6918,#6931,#6945,#6958,#6971,
++#6984,#6998,#7011,#7024,#7036,#7048,#7061,#7074,#7086,#7099,#7114,#7127,#7152,
++#7166,#7178,#7191,#7204,#7217,#7230,#7244,#7256,#7311,#7325,#7337,#7349,#7368,
++#7379,#7394,#7407,#7423,#7437,#7449,#7465,#7477,#7490,#7514,#7529,#7542,#7552,
++#7567,#7580,#7590,#7605,#7619,#7649,#7662,#7675,#7688,#7701,#7714,#7727,#7740,
++#7753,#7766,#7778,#7790,#7805,#7818,#7828,#7843,#7856,#7866,#7881,#7894,#7907,
++#7918,#7933,#7946,#7959,#7970,#7985,#7998,#8014,#8028,#8040,#8055,#8068,#8084,
++#8098,#8110,#8125,#8138,#8154,#8168,#8180,#8195,#8208,#8224,#8238,#8250,#8265,
++#8278,#8294,#8308,#8320,#8335,#8348,#8364,#8378,#8390,#8405,#8418,#8434,#8448,
++#8460,#8475,#8488,#8504,#8518,#8530,#8545,#8558,#8574,#8588,#8600,#8615,#8628,
++#8644,#8658,#8670,#8685,#8698,#8714,#8728,#8740,#8755,#8768,#8784,#8798,#8810,
++#8825,#8838,#8854,#8868,#8880,#8895,#8908,#8924,#8938,#8950,#8965,#8978,#8994,
++#9008,#9020,#9035,#9048,#9064,#9078,#9090,#9105,#9118,#9134,#9148,#9160,#9175,
++#9188,#9204,#9218,#9230,#9242,#9260,#9275,#9288,#9304,#9318,#9330,#9345,#9359,
++#9373,#9387,#9401,#9415,#9429,#9443,#9457,#9471,#9485,#9498,#9518,#9533,#9546,
++#9556,#9571,#9584,#9594,#9609,#9622,#9632,#9647,#9660,#9670,#9685,#9698,#9708,
++#9723,#9737,#9751,#9765,#9779,#9793,#9807,#9820,#9836,#9851,#9865,#9887,#9901,
++#9913,#9926,#9939,#9952,#9964,#9979,#9993,#10007,#10020,#10032,#10050,#10064,
++#10077,#10090,#10103,#10115,#10130,#10144,#10178,#10192,#10205,#10218,#10230,
++#10243,#10256,#10269,#10282,#10295,#10308,#10321,#10333,#10348,#10362,#10376,
++#10389,#10401,#10416,#10430,#10444,#10457,#10469,#10484,#10498,#10512,#10525,
++#10537,#10552,#10566,#10580,#10593,#10605,#10620,#10634,#10648,#10661,#10673,
++#10691,#10705,#10718,#10731,#10744,#10756,#10771,#10785,#10799,#10812,#10824,
++#10842,#10856,#10869,#10882,#10895,#10907,#10922,#10936,#10950,#10963,#10975,
++#10990,#11004,#11018,#11031,#11043,#11058,#11072,#11086,#11099,#11111,#11126,
++#11140,#11154,#11167,#11179,#11194,#11208,#11222,#11235,#11247,#11265,#11279,
++#11292,#11305,#11318,#11330,#11345,#11359,#11373,#11387,#11401,#11415,#11429,
++#11443,#11457,#11471,#11485,#11499,#11513,#11526,#11548));
++#11550=MANIFOLD_SOLID_BREP('',#11549);
++#11551=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
++#11552=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
++#11553=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#11552);
++#11554=(CONVERSION_BASED_UNIT('INCH',#11553)LENGTH_UNIT()NAMED_UNIT(#11551));
++#11555=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
++#11556=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
++#11557=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
++#11556);
++#11558=(CONVERSION_BASED_UNIT('DEGREE',#11557)NAMED_UNIT(#11555)PLANE_ANGLE_UNIT());
++#11559=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
++#11560=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(4.404650704771E-3),#11554,
++'closure',
++'Maximum model space distance between geometric entities at asserted connectivities');
++#11561=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
++#11560))GLOBAL_UNIT_ASSIGNED_CONTEXT((#11554,#11558,#11559))REPRESENTATION_CONTEXT('ID1','3'));
++#11563=APPLICATION_CONTEXT(
++'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
++#11564=APPLICATION_PROTOCOL_DEFINITION('international standard',
++'config_control_design',1994,#11563);
++#11565=DESIGN_CONTEXT('',#11563,'design');
++#11566=MECHANICAL_CONTEXT('',#11563,'mechanical');
++#11567=PRODUCT('PROESOURCE','PROESOURCE','NOT SPECIFIED',(#11566));
++#11568=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
++#11567,.MADE.);
++#11572=PRODUCT_CATEGORY('part','');
++#11573=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#11567));
++#11574=PRODUCT_CATEGORY_RELATIONSHIP('','',#11572,#11573);
++#11575=SECURITY_CLASSIFICATION_LEVEL('unclassified');
++#11576=SECURITY_CLASSIFICATION('','',#11575);
++#11577=CC_DESIGN_SECURITY_CLASSIFICATION(#11576,(#11568));
++#11578=APPROVAL_STATUS('approved');
++#11579=APPROVAL(#11578,'');
++#11580=CC_DESIGN_APPROVAL(#11579,(#11576,#11568,#11569));
++#11581=CALENDAR_DATE(102,4,11);
++#11582=COORDINATED_UNIVERSAL_TIME_OFFSET(5,0,.BEHIND.);
++#11583=LOCAL_TIME(14,0,4.8E1,#11582);
++#11584=DATE_AND_TIME(#11581,#11583);
++#11585=APPROVAL_DATE_TIME(#11584,#11579);
++#11586=DATE_TIME_ROLE('creation_date');
++#11587=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#11584,#11586,(#11569));
++#11588=DATE_TIME_ROLE('classification_date');
++#11589=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#11584,#11588,(#11576));
++#11590=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
++#11591=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
++#11592=PERSON_AND_ORGANIZATION(#11590,#11591);
++#11593=APPROVAL_ROLE('approver');
++#11594=APPROVAL_PERSON_ORGANIZATION(#11592,#11579,#11593);
++#11595=PERSON_AND_ORGANIZATION_ROLE('creator');
++#11596=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11595,(#11568,
++#11569));
++#11597=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
++#11598=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11597,(#11568));
++#11599=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
++#11600=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11599,(#11576));
++#11601=PERSON_AND_ORGANIZATION_ROLE('design_owner');
++#11602=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#11592,#11601,(#11567));
++#13=CIRCLE('',#12,1.925E-1);
++#18=CIRCLE('',#17,1.925E-1);
++#23=CIRCLE('',#22,1.925E-1);
++#28=CIRCLE('',#27,1.925E-1);
++#33=CIRCLE('',#32,1.925E-1);
++#38=CIRCLE('',#37,1.925E-1);
++#43=CIRCLE('',#42,1.925E-1);
++#48=CIRCLE('',#47,1.925E-1);
++#53=CIRCLE('',#52,1.925E-1);
++#58=CIRCLE('',#57,1.925E-1);
++#63=CIRCLE('',#62,1.925E-1);
++#68=CIRCLE('',#67,1.925E-1);
++#73=CIRCLE('',#72,1.925E-1);
++#78=CIRCLE('',#77,1.925E-1);
++#83=CIRCLE('',#82,1.925E-1);
++#88=CIRCLE('',#87,1.925E-1);
++#93=CIRCLE('',#92,1.925E-1);
++#98=CIRCLE('',#97,1.925E-1);
++#103=CIRCLE('',#102,1.925E-1);
++#108=CIRCLE('',#107,1.925E-1);
++#113=CIRCLE('',#112,1.925E-1);
++#118=CIRCLE('',#117,1.925E-1);
++#123=CIRCLE('',#122,1.925E-1);
++#128=CIRCLE('',#127,1.925E-1);
++#181=CIRCLE('',#180,1.925E-1);
++#186=CIRCLE('',#185,1.925E-1);
++#191=CIRCLE('',#190,1.925E-1);
++#196=CIRCLE('',#195,1.925E-1);
++#249=CIRCLE('',#248,1.925E-1);
++#254=CIRCLE('',#253,1.925E-1);
++#259=CIRCLE('',#258,1.925E-1);
++#264=CIRCLE('',#263,1.925E-1);
++#269=CIRCLE('',#268,1.925E-1);
++#274=CIRCLE('',#273,1.925E-1);
++#279=CIRCLE('',#278,1.925E-1);
++#284=CIRCLE('',#283,1.925E-1);
++#289=CIRCLE('',#288,1.925E-1);
++#294=CIRCLE('',#293,1.925E-1);
++#299=CIRCLE('',#298,1.925E-1);
++#304=CIRCLE('',#303,1.925E-1);
++#313=CIRCLE('',#312,5.625E-1);
++#322=CIRCLE('',#321,5.625E-1);
++#327=CIRCLE('',#326,9.225E-1);
++#336=CIRCLE('',#335,8.669989027347E-1);
++#341=CIRCLE('',#340,5.6875E0);
++#350=CIRCLE('',#349,5.6125E-1);
++#383=CIRCLE('',#382,5.625E-1);
++#392=CIRCLE('',#391,5.625E-1);
++#401=CIRCLE('',#400,5.625E-1);
++#410=CIRCLE('',#409,5.625E-1);
++#419=CIRCLE('',#418,5.E-1);
++#428=CIRCLE('',#427,5.E-1);
++#437=CIRCLE('',#436,4.375E-1);
++#446=CIRCLE('',#445,4.375E-1);
++#455=CIRCLE('',#454,5.625E-1);
++#464=CIRCLE('',#463,5.625E-1);
++#473=CIRCLE('',#472,5.625E-1);
++#482=CIRCLE('',#481,5.625E-1);
++#491=CIRCLE('',#490,5.625E-1);
++#500=CIRCLE('',#499,5.625E-1);
++#509=CIRCLE('',#508,5.625E-1);
++#518=CIRCLE('',#517,5.625E-1);
++#527=CIRCLE('',#526,5.E-1);
++#536=CIRCLE('',#535,5.E-1);
++#545=CIRCLE('',#544,4.375E-1);
++#554=CIRCLE('',#553,4.375E-1);
++#563=CIRCLE('',#562,5.625E-1);
++#572=CIRCLE('',#571,5.625E-1);
++#581=CIRCLE('',#580,5.6125E-1);
++#614=CIRCLE('',#613,9.225E-1);
++#619=CIRCLE('',#618,5.6875E0);
++#624=CIRCLE('',#623,8.669989027347E-1);
++#633=CIRCLE('',#632,9.225E-1);
++#638=CIRCLE('',#637,5.6875E0);
++#643=CIRCLE('',#642,8.669989027347E-1);
++#648=CIRCLE('',#647,9.225E-1);
++#657=CIRCLE('',#656,8.669989027347E-1);
++#662=CIRCLE('',#661,5.6875E0);
++#667=CIRCLE('',#666,9.5E-2);
++#672=CIRCLE('',#671,9.5E-2);
++#677=CIRCLE('',#676,1.625E-1);
++#682=CIRCLE('',#681,1.625E-1);
++#687=CIRCLE('',#686,9.5E-2);
++#692=CIRCLE('',#691,9.5E-2);
++#697=CIRCLE('',#696,9.5E-2);
++#702=CIRCLE('',#701,9.5E-2);
++#707=CIRCLE('',#706,9.5E-2);
++#712=CIRCLE('',#711,9.5E-2);
++#717=CIRCLE('',#716,9.5E-2);
++#722=CIRCLE('',#721,9.5E-2);
++#727=CIRCLE('',#726,1.625E-1);
++#732=CIRCLE('',#731,1.625E-1);
++#737=CIRCLE('',#736,9.5E-2);
++#742=CIRCLE('',#741,9.5E-2);
++#803=CIRCLE('',#802,9.5E-2);
++#808=CIRCLE('',#807,9.5E-2);
++#821=CIRCLE('',#820,1.625E-1);
++#826=CIRCLE('',#825,1.625E-1);
++#887=CIRCLE('',#886,1.E-1);
++#892=CIRCLE('',#891,1.E-1);
++#897=CIRCLE('',#896,1.E-1);
++#902=CIRCLE('',#901,1.E-1);
++#931=CIRCLE('',#930,1.E-1);
++#936=CIRCLE('',#935,1.E-1);
++#941=CIRCLE('',#940,1.E-1);
++#946=CIRCLE('',#945,1.E-1);
++#951=CIRCLE('',#950,2.575E-1);
++#956=CIRCLE('',#955,2.575E-1);
++#961=CIRCLE('',#960,2.575E-1);
++#966=CIRCLE('',#965,2.575E-1);
++#971=CIRCLE('',#970,2.575E-1);
++#976=CIRCLE('',#975,2.575E-1);
++#981=CIRCLE('',#980,2.575E-1);
++#986=CIRCLE('',#985,2.575E-1);
++#991=CIRCLE('',#990,2.575E-1);
++#996=CIRCLE('',#995,2.575E-1);
++#1001=CIRCLE('',#1000,2.575E-1);
++#1006=CIRCLE('',#1005,2.575E-1);
++#1011=CIRCLE('',#1010,2.56E-1);
++#1016=CIRCLE('',#1015,2.56E-1);
++#1021=CIRCLE('',#1020,2.56E-1);
++#1026=CIRCLE('',#1025,2.56E-1);
++#1031=CIRCLE('',#1030,2.56E-1);
++#1036=CIRCLE('',#1035,2.56E-1);
++#1041=CIRCLE('',#1040,2.56E-1);
++#1046=CIRCLE('',#1045,2.56E-1);
++#1051=CIRCLE('',#1050,2.56E-1);
++#1056=CIRCLE('',#1055,2.56E-1);
++#1061=CIRCLE('',#1060,2.56E-1);
++#1066=CIRCLE('',#1065,2.56E-1);
++#1115=CIRCLE('',#1114,2.575E-1);
++#1120=CIRCLE('',#1119,2.575E-1);
++#1125=CIRCLE('',#1124,2.575E-1);
++#1130=CIRCLE('',#1129,2.575E-1);
++#1135=CIRCLE('',#1134,2.575E-1);
++#1140=CIRCLE('',#1139,2.575E-1);
++#1145=CIRCLE('',#1144,2.575E-1);
++#1150=CIRCLE('',#1149,2.575E-1);
++#1155=CIRCLE('',#1154,2.575E-1);
++#1160=CIRCLE('',#1159,2.575E-1);
++#1165=CIRCLE('',#1164,2.575E-1);
++#1170=CIRCLE('',#1169,2.575E-1);
++#1259=CIRCLE('',#1258,1.E-1);
++#1268=CIRCLE('',#1267,1.E-1);
++#1285=CIRCLE('',#1284,1.E-1);
++#1294=CIRCLE('',#1293,1.E-1);
++#1303=CIRCLE('',#1302,1.E0);
++#1312=CIRCLE('',#1311,1.E0);
++#1317=CIRCLE('',#1316,5.E0);
++#1326=CIRCLE('',#1325,5.E0);
++#1331=CIRCLE('',#1330,5.E0);
++#1340=CIRCLE('',#1339,5.E0);
++#1349=CIRCLE('',#1348,1.E0);
++#1358=CIRCLE('',#1357,1.E0);
++#1367=CIRCLE('',#1366,1.E0);
++#1376=CIRCLE('',#1375,1.E0);
++#1385=CIRCLE('',#1384,1.E0);
++#1394=CIRCLE('',#1393,1.E0);
++#1403=CIRCLE('',#1402,1.E0);
++#1412=CIRCLE('',#1411,1.E0);
++#1421=CIRCLE('',#1420,3.E0);
++#1430=CIRCLE('',#1429,3.E0);
++#1439=CIRCLE('',#1438,3.E0);
++#1448=CIRCLE('',#1447,3.E0);
++#1457=CIRCLE('',#1456,5.E0);
++#1466=CIRCLE('',#1465,5.E0);
++#1475=CIRCLE('',#1474,5.E0);
++#1484=CIRCLE('',#1483,5.E0);
++#1493=CIRCLE('',#1492,3.E0);
++#1502=CIRCLE('',#1501,3.E0);
++#1511=CIRCLE('',#1510,3.E0);
++#1520=CIRCLE('',#1519,3.E0);
++#1529=CIRCLE('',#1528,1.E0);
++#1538=CIRCLE('',#1537,1.E0);
++#1547=CIRCLE('',#1546,1.E0);
++#1556=CIRCLE('',#1555,1.E0);
++#1597=CIRCLE('',#1596,1.E0);
++#1606=CIRCLE('',#1605,1.E0);
++#1675=CIRCLE('',#1674,9.5E-2);
++#1680=CIRCLE('',#1679,9.5E-2);
++#1685=CIRCLE('',#1684,6.25E-2);
++#1690=CIRCLE('',#1689,6.25E-2);
++#1707=CIRCLE('',#1706,1.E0);
++#1716=CIRCLE('',#1715,1.E0);
++#1729=CIRCLE('',#1728,1.E0);
++#1738=CIRCLE('',#1737,1.E0);
++#1767=CIRCLE('',#1766,1.625E-1);
++#1772=CIRCLE('',#1771,1.625E-1);
++#1846=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1837,#1838,#1839,#1840,#1841,#1842,#1843,
++#1844,#1845),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,
++6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);
++#1856=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1847,#1848,#1849,#1850,#1851,#1852,#1853,
++#1854,#1855),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,
++6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);
++#1873=CIRCLE('',#1872,2.575E-1);
++#1878=CIRCLE('',#1877,2.575E-1);
++#1883=CIRCLE('',#1882,1.925E-1);
++#1888=CIRCLE('',#1887,1.925E-1);
++#1933=CIRCLE('',#1932,9.5E-2);
++#1938=CIRCLE('',#1937,9.5E-2);
++#1943=CIRCLE('',#1942,6.25E-2);
++#1948=CIRCLE('',#1947,6.25E-2);
++#1961=CIRCLE('',#1960,9.5E-2);
++#1966=CIRCLE('',#1965,9.5E-2);
++#1979=CIRCLE('',#1978,6.25E-2);
++#1984=CIRCLE('',#1983,6.25E-2);
++#1993=CIRCLE('',#1992,3.5E-1);
++#2002=CIRCLE('',#2001,3.5E-1);
++#2035=CIRCLE('',#2034,3.5E-1);
++#2044=CIRCLE('',#2043,3.5E-1);
++#2053=CIRCLE('',#2052,3.5E-1);
++#2062=CIRCLE('',#2061,3.5E-1);
++#2071=CIRCLE('',#2070,3.5E-1);
++#2080=CIRCLE('',#2079,3.5E-1);
++#2089=CIRCLE('',#2088,3.5E-1);
++#2098=CIRCLE('',#2097,3.5E-1);
++#2107=CIRCLE('',#2106,3.5E-1);
++#2116=CIRCLE('',#2115,3.5E-1);
++#2145=CIRCLE('',#2144,9.5E-2);
++#2150=CIRCLE('',#2149,9.5E-2);
++#2163=CIRCLE('',#2162,6.25E-2);
++#2168=CIRCLE('',#2167,6.25E-2);
++#2189=CIRCLE('',#2188,1.E-1);
++#2194=CIRCLE('',#2193,1.E-1);
++#2215=CIRCLE('',#2214,1.E-1);
++#2220=CIRCLE('',#2219,1.E-1);
++#2233=CIRCLE('',#2232,2.575E-1);
++#2238=CIRCLE('',#2237,2.575E-1);
++#2243=CIRCLE('',#2242,1.925E-1);
++#2248=CIRCLE('',#2247,1.925E-1);
++#2269=CIRCLE('',#2268,2.575E-1);
++#2274=CIRCLE('',#2273,2.575E-1);
++#2279=CIRCLE('',#2278,1.925E-1);
++#2284=CIRCLE('',#2283,1.925E-1);
++#2305=CIRCLE('',#2304,2.575E-1);
++#2310=CIRCLE('',#2309,2.575E-1);
++#2315=CIRCLE('',#2314,1.925E-1);
++#2320=CIRCLE('',#2319,1.925E-1);
++#2341=CIRCLE('',#2340,2.575E-1);
++#2346=CIRCLE('',#2345,2.575E-1);
++#2351=CIRCLE('',#2350,1.925E-1);
++#2356=CIRCLE('',#2355,1.925E-1);
++#2377=CIRCLE('',#2376,2.575E-1);
++#2382=CIRCLE('',#2381,2.575E-1);
++#2387=CIRCLE('',#2386,1.925E-1);
++#2392=CIRCLE('',#2391,1.925E-1);
++#2413=CIRCLE('',#2412,2.575E-1);
++#2418=CIRCLE('',#2417,2.575E-1);
++#2423=CIRCLE('',#2422,1.925E-1);
++#2428=CIRCLE('',#2427,1.925E-1);
++#2449=CIRCLE('',#2448,2.56E-1);
++#2454=CIRCLE('',#2453,2.56E-1);
++#2459=CIRCLE('',#2458,1.925E-1);
++#2464=CIRCLE('',#2463,1.925E-1);
++#2485=CIRCLE('',#2484,2.56E-1);
++#2490=CIRCLE('',#2489,2.56E-1);
++#2495=CIRCLE('',#2494,1.925E-1);
++#2500=CIRCLE('',#2499,1.925E-1);
++#2521=CIRCLE('',#2520,2.56E-1);
++#2526=CIRCLE('',#2525,2.56E-1);
++#2531=CIRCLE('',#2530,1.925E-1);
++#2536=CIRCLE('',#2535,1.925E-1);
++#2557=CIRCLE('',#2556,2.56E-1);
++#2562=CIRCLE('',#2561,2.56E-1);
++#2567=CIRCLE('',#2566,1.925E-1);
++#2572=CIRCLE('',#2571,1.925E-1);
++#2593=CIRCLE('',#2592,2.56E-1);
++#2598=CIRCLE('',#2597,2.56E-1);
++#2603=CIRCLE('',#2602,1.925E-1);
++#2608=CIRCLE('',#2607,1.925E-1);
++#2629=CIRCLE('',#2628,2.56E-1);
++#2634=CIRCLE('',#2633,2.56E-1);
++#2639=CIRCLE('',#2638,1.925E-1);
++#2644=CIRCLE('',#2643,1.925E-1);
++#2665=CIRCLE('',#2664,2.575E-1);
++#2670=CIRCLE('',#2669,2.575E-1);
++#2675=CIRCLE('',#2674,1.925E-1);
++#2680=CIRCLE('',#2679,1.925E-1);
++#2701=CIRCLE('',#2700,2.575E-1);
++#2706=CIRCLE('',#2705,2.575E-1);
++#2711=CIRCLE('',#2710,1.925E-1);
++#2716=CIRCLE('',#2715,1.925E-1);
++#2737=CIRCLE('',#2736,2.575E-1);
++#2742=CIRCLE('',#2741,2.575E-1);
++#2747=CIRCLE('',#2746,1.925E-1);
++#2752=CIRCLE('',#2751,1.925E-1);
++#2773=CIRCLE('',#2772,2.575E-1);
++#2778=CIRCLE('',#2777,2.575E-1);
++#2783=CIRCLE('',#2782,1.925E-1);
++#2788=CIRCLE('',#2787,1.925E-1);
++#2809=CIRCLE('',#2808,2.575E-1);
++#2814=CIRCLE('',#2813,2.575E-1);
++#2819=CIRCLE('',#2818,1.925E-1);
++#2824=CIRCLE('',#2823,1.925E-1);
++#2845=CIRCLE('',#2844,2.575E-1);
++#2850=CIRCLE('',#2849,2.575E-1);
++#2855=CIRCLE('',#2854,1.925E-1);
++#2860=CIRCLE('',#2859,1.925E-1);
++#2882=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2873,#2874,#2875,#2876,#2877,#2878,#2879,
++#2880,#2881),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,
++6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);
++#2892=B_SPLINE_CURVE_WITH_KNOTS('',3,(#2883,#2884,#2885,#2886,#2887,#2888,#2889,
++#2890,#2891),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,4),(0.E0,2.5E-1,3.75E-1,5.E-1,
++6.25E-1,7.5E-1,1.E0),.UNSPECIFIED.);
++#2905=CIRCLE('',#2904,2.575E-1);
++#2910=CIRCLE('',#2909,2.575E-1);
++#2915=CIRCLE('',#2914,1.925E-1);
++#2920=CIRCLE('',#2919,1.925E-1);
++#2937=CIRCLE('',#2936,3.5E-1);
++#2946=CIRCLE('',#2945,3.5E-1);
++#2955=CIRCLE('',#2954,3.5E-1);
++#2964=CIRCLE('',#2963,3.5E-1);
++#2973=CIRCLE('',#2972,3.5E-1);
++#2982=CIRCLE('',#2981,3.5E-1);
++#2991=CIRCLE('',#2990,3.5E-1);
++#3000=CIRCLE('',#2999,3.5E-1);
++#3009=CIRCLE('',#3008,3.5E-1);
++#3018=CIRCLE('',#3017,3.5E-1);
++#3027=CIRCLE('',#3026,3.5E-1);
++#3036=CIRCLE('',#3035,3.5E-1);
++#3073=CIRCLE('',#3072,9.5E-2);
++#3078=CIRCLE('',#3077,9.5E-2);
++#3091=CIRCLE('',#3090,9.5E-2);
++#3096=CIRCLE('',#3095,9.5E-2);
++#3109=CIRCLE('',#3108,9.5E-2);
++#3114=CIRCLE('',#3113,9.5E-2);
++#3127=CIRCLE('',#3126,9.5E-2);
++#3132=CIRCLE('',#3131,9.5E-2);
++#3145=CIRCLE('',#3144,9.5E-2);
++#3150=CIRCLE('',#3149,9.5E-2);
++#3159=CIRCLE('',#3158,7.5E-1);
++#3168=CIRCLE('',#3167,7.5E-1);
++#3177=CIRCLE('',#3176,7.5E-1);
++#3186=CIRCLE('',#3185,7.5E-1);
++#3195=CIRCLE('',#3194,7.5E-1);
++#3204=CIRCLE('',#3203,7.5E-1);
++#3213=CIRCLE('',#3212,7.5E-1);
++#3222=CIRCLE('',#3221,7.5E-1);
++#3247=CIRCLE('',#3246,7.5E-1);
++#3256=CIRCLE('',#3255,7.5E-1);
++#3281=CIRCLE('',#3280,7.5E-1);
++#3290=CIRCLE('',#3289,7.5E-1);
++#3299=CIRCLE('',#3298,7.5E-1);
++#3308=CIRCLE('',#3307,7.5E-1);
++#3317=CIRCLE('',#3316,7.5E-1);
++#3326=CIRCLE('',#3325,7.5E-1);
++#3351=CIRCLE('',#3350,5.625E-1);
++#3360=CIRCLE('',#3359,5.625E-1);
++#3365=CIRCLE('',#3364,9.225E-1);
++#3370=CIRCLE('',#3369,5.6875E0);
++#3375=CIRCLE('',#3374,8.669989027347E-1);
++#3388=CIRCLE('',#3387,7.5E-1);
++#3397=CIRCLE('',#3396,7.5E-1);
++#3418=CIRCLE('',#3417,8.75E-1);
++#3427=CIRCLE('',#3426,8.75E-1);
++#3440=CIRCLE('',#3439,5.6125E-1);
++#3469=CIRCLE('',#3468,8.75E-1);
++#3478=CIRCLE('',#3477,8.75E-1);
++#3495=CIRCLE('',#3494,8.75E-1);
++#3504=CIRCLE('',#3503,8.75E-1);
++#3513=CIRCLE('',#3512,8.75E-1);
++#3522=CIRCLE('',#3521,8.75E-1);
++#3531=CIRCLE('',#3530,8.75E-1);
++#3540=CIRCLE('',#3539,8.75E-1);
++#3549=CIRCLE('',#3548,8.75E-1);
++#3558=CIRCLE('',#3557,8.75E-1);
++#3583=CIRCLE('',#3582,5.625E-1);
++#3592=CIRCLE('',#3591,5.625E-1);
++#3617=CIRCLE('',#3616,5.625E-1);
++#3626=CIRCLE('',#3625,5.625E-1);
++#3651=CIRCLE('',#3650,5.E-1);
++#3660=CIRCLE('',#3659,5.E-1);
++#3685=CIRCLE('',#3684,4.375E-1);
++#3694=CIRCLE('',#3693,4.375E-1);
++#3719=CIRCLE('',#3718,5.625E-1);
++#3728=CIRCLE('',#3727,5.625E-1);
++#3737=CIRCLE('',#3736,8.669989027347E-1);
++#3742=CIRCLE('',#3741,5.6875E0);
++#3747=CIRCLE('',#3746,9.225E-1);
++#3756=CIRCLE('',#3755,7.5E-1);
++#3765=CIRCLE('',#3764,7.5E-1);
++#3802=CIRCLE('',#3801,5.625E-1);
++#3811=CIRCLE('',#3810,5.625E-1);
++#3820=CIRCLE('',#3819,8.669989027347E-1);
++#3825=CIRCLE('',#3824,5.6875E0);
++#3830=CIRCLE('',#3829,9.225E-1);
++#3839=CIRCLE('',#3838,7.5E-1);
++#3848=CIRCLE('',#3847,7.5E-1);
++#3885=CIRCLE('',#3884,5.625E-1);
++#3894=CIRCLE('',#3893,5.625E-1);
++#3919=CIRCLE('',#3918,5.625E-1);
++#3928=CIRCLE('',#3927,5.625E-1);
++#3953=CIRCLE('',#3952,5.E-1);
++#3962=CIRCLE('',#3961,5.E-1);
++#3987=CIRCLE('',#3986,4.375E-1);
++#3996=CIRCLE('',#3995,4.375E-1);
++#4021=CIRCLE('',#4020,5.625E-1);
++#4030=CIRCLE('',#4029,5.625E-1);
++#4035=CIRCLE('',#4034,9.225E-1);
++#4040=CIRCLE('',#4039,5.6875E0);
++#4045=CIRCLE('',#4044,8.669989027347E-1);
++#4058=CIRCLE('',#4057,7.5E-1);
++#4067=CIRCLE('',#4066,7.5E-1);
++#4088=CIRCLE('',#4087,8.8E-1);
++#4097=CIRCLE('',#4096,8.8E-1);
++#4106=CIRCLE('',#4105,8.8E-1);
++#4115=CIRCLE('',#4114,8.8E-1);
++#4124=CIRCLE('',#4123,8.8E-1);
++#4133=CIRCLE('',#4132,8.8E-1);
++#4142=CIRCLE('',#4141,8.8E-1);
++#4151=CIRCLE('',#4150,8.8E-1);
++#4160=CIRCLE('',#4159,8.8E-1);
++#4169=CIRCLE('',#4168,8.8E-1);
++#4178=CIRCLE('',#4177,8.8E-1);
++#4187=CIRCLE('',#4186,8.8E-1);
++#4208=CIRCLE('',#4207,5.6125E-1);
++#5494=EDGE_CURVE('',#4423,#4400,#132,.T.);
++#5496=EDGE_CURVE('',#4419,#4423,#1597,.T.);
++#5498=EDGE_CURVE('',#4419,#4243,#136,.T.);
++#5500=EDGE_CURVE('',#4239,#4243,#1614,.T.);
++#5502=EDGE_CURVE('',#4239,#4259,#140,.T.);
++#5504=EDGE_CURVE('',#4255,#4259,#1630,.T.);
++#5506=EDGE_CURVE('',#4255,#4320,#144,.T.);
++#5508=EDGE_CURVE('',#4324,#4320,#1376,.T.);
++#5510=EDGE_CURVE('',#4324,#4300,#148,.T.);
++#5512=EDGE_CURVE('',#4300,#4347,#152,.T.);
++#5514=EDGE_CURVE('',#4343,#4347,#1912,.T.);
++#5516=EDGE_CURVE('',#4343,#4315,#156,.T.);
++#5518=EDGE_CURVE('',#4311,#4315,#1385,.T.);
++#5520=EDGE_CURVE('',#4311,#4251,#160,.T.);
++#5522=EDGE_CURVE('',#4247,#4251,#1580,.T.);
++#5524=EDGE_CURVE('',#4247,#4235,#164,.T.);
++#5526=EDGE_CURVE('',#4231,#4235,#1564,.T.);
++#5528=EDGE_CURVE('',#4231,#4404,#168,.T.);
++#5530=EDGE_CURVE('',#4408,#4404,#1556,.T.);
++#5532=EDGE_CURVE('',#4444,#4408,#172,.T.);
++#5534=EDGE_CURVE('',#4444,#4448,#1654,.T.);
++#5536=EDGE_CURVE('',#4400,#4448,#176,.T.);
++#5540=EDGE_CURVE('',#4427,#4328,#4,.T.);
++#5542=EDGE_CURVE('',#4332,#4328,#1358,.T.);
++#5544=EDGE_CURVE('',#4264,#4332,#1340,.T.);
++#5546=EDGE_CURVE('',#4268,#4264,#8,.T.);
++#5548=EDGE_CURVE('',#4431,#4268,#1317,.T.);
++#5550=EDGE_CURVE('',#4427,#4431,#1303,.T.);
++#5554=EDGE_CURVE('',#4639,#4640,#13,.T.);
++#5556=EDGE_CURVE('',#4640,#4639,#18,.T.);
++#5560=EDGE_CURVE('',#4635,#4636,#23,.T.);
++#5562=EDGE_CURVE('',#4636,#4635,#28,.T.);
++#5566=EDGE_CURVE('',#4631,#4632,#33,.T.);
++#5568=EDGE_CURVE('',#4632,#4631,#38,.T.);
++#5572=EDGE_CURVE('',#4627,#4628,#43,.T.);
++#5574=EDGE_CURVE('',#4628,#4627,#48,.T.);
++#5578=EDGE_CURVE('',#4623,#4624,#53,.T.);
++#5580=EDGE_CURVE('',#4624,#4623,#58,.T.);
++#5584=EDGE_CURVE('',#4527,#4528,#63,.T.);
++#5586=EDGE_CURVE('',#4528,#4527,#68,.T.);
++#5590=EDGE_CURVE('',#4523,#4524,#73,.T.);
++#5592=EDGE_CURVE('',#4524,#4523,#78,.T.);
++#5596=EDGE_CURVE('',#4519,#4520,#83,.T.);
++#5598=EDGE_CURVE('',#4520,#4519,#88,.T.);
++#5602=EDGE_CURVE('',#4515,#4516,#93,.T.);
++#5604=EDGE_CURVE('',#4516,#4515,#98,.T.);
++#5608=EDGE_CURVE('',#4511,#4512,#103,.T.);
++#5610=EDGE_CURVE('',#4512,#4511,#108,.T.);
++#5614=EDGE_CURVE('',#4507,#4508,#113,.T.);
++#5616=EDGE_CURVE('',#4508,#4507,#118,.T.);
++#5620=EDGE_CURVE('',#4503,#4504,#123,.T.);
++#5622=EDGE_CURVE('',#4504,#4503,#128,.T.);
++#5626=EDGE_CURVE('',#4487,#4488,#181,.T.);
++#5628=EDGE_CURVE('',#4488,#4487,#186,.T.);
++#5632=EDGE_CURVE('',#4607,#4608,#191,.T.);
++#5634=EDGE_CURVE('',#4608,#4607,#196,.T.);
++#5638=EDGE_CURVE('',#4796,#4803,#200,.T.);
++#5640=EDGE_CURVE('',#4799,#4803,#1439,.T.);
++#5642=EDGE_CURVE('',#4280,#4799,#204,.T.);
++#5644=EDGE_CURVE('',#4284,#4280,#1466,.T.);
++#5646=EDGE_CURVE('',#4272,#4284,#208,.T.);
++#5648=EDGE_CURVE('',#4276,#4272,#1484,.T.);
++#5650=EDGE_CURVE('',#4792,#4276,#212,.T.);
++#5652=EDGE_CURVE('',#4796,#4792,#1430,.T.);
++#5656=EDGE_CURVE('',#4808,#4411,#216,.T.);
++#5658=EDGE_CURVE('',#4812,#4808,#1502,.T.);
++#5660=EDGE_CURVE('',#4812,#4819,#220,.T.);
++#5662=EDGE_CURVE('',#4815,#4819,#1511,.T.);
++#5664=EDGE_CURVE('',#4304,#4815,#224,.T.);
++#5666=EDGE_CURVE('',#4308,#4304,#1412,.T.);
++#5668=EDGE_CURVE('',#4308,#4339,#228,.T.);
++#5670=EDGE_CURVE('',#4335,#4339,#1754,.T.);
++#5672=EDGE_CURVE('',#4335,#4772,#232,.T.);
++#5674=EDGE_CURVE('',#4776,#4772,#1738,.T.);
++#5676=EDGE_CURVE('',#4776,#4783,#236,.T.);
++#5678=EDGE_CURVE('',#4779,#4783,#1707,.T.);
++#5680=EDGE_CURVE('',#4436,#4779,#240,.T.);
++#5682=EDGE_CURVE('',#4436,#4440,#2132,.T.);
++#5684=EDGE_CURVE('',#4415,#4440,#244,.T.);
++#5686=EDGE_CURVE('',#4411,#4415,#1529,.T.);
++#5690=EDGE_CURVE('',#4823,#4824,#249,.T.);
++#5692=EDGE_CURVE('',#4824,#4823,#254,.T.);
++#5696=EDGE_CURVE('',#4839,#4840,#259,.T.);
++#5698=EDGE_CURVE('',#4840,#4839,#264,.T.);
++#5702=EDGE_CURVE('',#4843,#4844,#269,.T.);
++#5704=EDGE_CURVE('',#4844,#4843,#274,.T.);
++#5708=EDGE_CURVE('',#4847,#4848,#279,.T.);
++#5710=EDGE_CURVE('',#4848,#4847,#284,.T.);
++#5714=EDGE_CURVE('',#4851,#4852,#289,.T.);
++#5716=EDGE_CURVE('',#4852,#4851,#294,.T.);
++#5720=EDGE_CURVE('',#4855,#4856,#299,.T.);
++#5722=EDGE_CURVE('',#4856,#4855,#304,.T.);
++#5726=EDGE_CURVE('',#5121,#5122,#308,.T.);
++#5728=EDGE_CURVE('',#5122,#5124,#313,.T.);
++#5730=EDGE_CURVE('',#5124,#5126,#317,.T.);
++#5732=EDGE_CURVE('',#5126,#5121,#322,.T.);
++#5736=EDGE_CURVE('',#5132,#5139,#327,.T.);
++#5738=EDGE_CURVE('',#5135,#5139,#3388,.T.);
++#5740=EDGE_CURVE('',#5135,#5129,#331,.T.);
++#5742=EDGE_CURVE('',#5129,#5130,#336,.T.);
++#5744=EDGE_CURVE('',#5132,#5130,#341,.T.);
++#5748=EDGE_CURVE('',#5184,#5186,#3418,.T.);
++#5750=EDGE_CURVE('',#5184,#5147,#345,.T.);
++#5752=EDGE_CURVE('',#5147,#5148,#350,.T.);
++#5754=EDGE_CURVE('',#5148,#5194,#354,.T.);
++#5756=EDGE_CURVE('',#5192,#5194,#3469,.T.);
++#5758=EDGE_CURVE('',#5192,#5171,#358,.T.);
++#5760=EDGE_CURVE('',#5167,#5171,#3495,.T.);
++#5762=EDGE_CURVE('',#5167,#5179,#362,.T.);
++#5764=EDGE_CURVE('',#5175,#5179,#3513,.T.);
++#5766=EDGE_CURVE('',#5175,#5155,#366,.T.);
++#5768=EDGE_CURVE('',#5151,#5155,#3531,.T.);
++#5770=EDGE_CURVE('',#5151,#5163,#370,.T.);
++#5772=EDGE_CURVE('',#5159,#5163,#3549,.T.);
++#5774=EDGE_CURVE('',#5159,#5186,#374,.T.);
++#5778=EDGE_CURVE('',#5207,#5208,#378,.T.);
++#5780=EDGE_CURVE('',#5208,#5210,#383,.T.);
++#5782=EDGE_CURVE('',#5210,#5212,#387,.T.);
++#5784=EDGE_CURVE('',#5212,#5207,#392,.T.);
++#5788=EDGE_CURVE('',#5223,#5224,#396,.T.);
++#5790=EDGE_CURVE('',#5224,#5226,#401,.T.);
++#5792=EDGE_CURVE('',#5226,#5228,#405,.T.);
++#5794=EDGE_CURVE('',#5228,#5223,#410,.T.);
++#5798=EDGE_CURVE('',#5239,#5240,#414,.T.);
++#5800=EDGE_CURVE('',#5240,#5242,#419,.T.);
++#5802=EDGE_CURVE('',#5242,#5244,#423,.T.);
++#5804=EDGE_CURVE('',#5244,#5239,#428,.T.);
++#5808=EDGE_CURVE('',#5255,#5256,#432,.T.);
++#5810=EDGE_CURVE('',#5256,#5258,#437,.T.);
++#5812=EDGE_CURVE('',#5258,#5260,#441,.T.);
++#5814=EDGE_CURVE('',#5260,#5255,#446,.T.);
++#5818=EDGE_CURVE('',#5277,#5278,#450,.T.);
++#5820=EDGE_CURVE('',#5282,#5277,#455,.T.);
++#5822=EDGE_CURVE('',#5280,#5282,#459,.T.);
++#5824=EDGE_CURVE('',#5278,#5280,#464,.T.);
++#5828=EDGE_CURVE('',#5305,#5306,#468,.T.);
++#5830=EDGE_CURVE('',#5310,#5305,#473,.T.);
++#5832=EDGE_CURVE('',#5308,#5310,#477,.T.);
++#5834=EDGE_CURVE('',#5306,#5308,#482,.T.);
++#5838=EDGE_CURVE('',#5335,#5336,#486,.T.);
++#5840=EDGE_CURVE('',#5340,#5335,#491,.T.);
++#5842=EDGE_CURVE('',#5338,#5340,#495,.T.);
++#5844=EDGE_CURVE('',#5336,#5338,#500,.T.);
++#5848=EDGE_CURVE('',#5351,#5352,#504,.T.);
++#5850=EDGE_CURVE('',#5356,#5351,#509,.T.);
++#5852=EDGE_CURVE('',#5354,#5356,#513,.T.);
++#5854=EDGE_CURVE('',#5352,#5354,#518,.T.);
++#5858=EDGE_CURVE('',#5367,#5368,#522,.T.);
++#5860=EDGE_CURVE('',#5372,#5367,#527,.T.);
++#5862=EDGE_CURVE('',#5370,#5372,#531,.T.);
++#5864=EDGE_CURVE('',#5368,#5370,#536,.T.);
++#5868=EDGE_CURVE('',#5383,#5384,#540,.T.);
++#5870=EDGE_CURVE('',#5388,#5383,#545,.T.);
++#5872=EDGE_CURVE('',#5386,#5388,#549,.T.);
++#5874=EDGE_CURVE('',#5384,#5386,#554,.T.);
++#5878=EDGE_CURVE('',#5405,#5406,#558,.T.);
++#5880=EDGE_CURVE('',#5406,#5408,#563,.T.);
++#5882=EDGE_CURVE('',#5408,#5410,#567,.T.);
++#5884=EDGE_CURVE('',#5410,#5405,#572,.T.);
++#5888=EDGE_CURVE('',#5455,#5451,#4097,.T.);
++#5890=EDGE_CURVE('',#5324,#5455,#576,.T.);
++#5892=EDGE_CURVE('',#5323,#5324,#581,.T.);
++#5894=EDGE_CURVE('',#5459,#5323,#585,.T.);
++#5896=EDGE_CURVE('',#5463,#5459,#4187,.T.);
++#5898=EDGE_CURVE('',#5436,#5463,#589,.T.);
++#5900=EDGE_CURVE('',#5440,#5436,#4169,.T.);
++#5902=EDGE_CURVE('',#5444,#5440,#593,.T.);
++#5904=EDGE_CURVE('',#5448,#5444,#4151,.T.);
++#5906=EDGE_CURVE('',#5428,#5448,#597,.T.);
++#5908=EDGE_CURVE('',#5432,#5428,#4133,.T.);
++#5910=EDGE_CURVE('',#5420,#5432,#601,.T.);
++#5912=EDGE_CURVE('',#5424,#5420,#4115,.T.);
++#5914=EDGE_CURVE('',#5451,#5424,#605,.T.);
++#5918=EDGE_CURVE('',#5471,#5313,#609,.T.);
++#5920=EDGE_CURVE('',#5467,#5471,#3839,.T.);
++#5922=EDGE_CURVE('',#5316,#5467,#614,.T.);
++#5924=EDGE_CURVE('',#5316,#5314,#619,.T.);
++#5926=EDGE_CURVE('',#5313,#5314,#624,.T.);
++#5930=EDGE_CURVE('',#5479,#5285,#628,.T.);
++#5932=EDGE_CURVE('',#5475,#5479,#3756,.T.);
++#5934=EDGE_CURVE('',#5288,#5475,#633,.T.);
++#5936=EDGE_CURVE('',#5288,#5286,#638,.T.);
++#5938=EDGE_CURVE('',#5285,#5286,#643,.T.);
++#5942=EDGE_CURVE('',#5416,#5487,#648,.T.);
++#5944=EDGE_CURVE('',#5483,#5487,#4058,.T.);
++#5946=EDGE_CURVE('',#5483,#5413,#652,.T.);
++#5948=EDGE_CURVE('',#5413,#5414,#657,.T.);
++#5950=EDGE_CURVE('',#5416,#5414,#662,.T.);
++#5961=EDGE_CURVE('',#4427,#4428,#1298,.T.);
++#5963=EDGE_CURVE('',#4424,#4428,#906,.T.);
++#5965=EDGE_CURVE('',#4423,#4424,#1601,.T.);
++#5968=EDGE_CURVE('',#4390,#4400,#1658,.T.);
++#5970=EDGE_CURVE('',#4387,#4390,#746,.T.);
++#5972=EDGE_CURVE('',#4387,#4388,#750,.T.);
++#5974=EDGE_CURVE('',#4768,#4388,#1698,.T.);
++#5976=EDGE_CURVE('',#4767,#4768,#1230,.T.);
++#5978=EDGE_CURVE('',#4287,#4767,#1746,.T.);
++#5980=EDGE_CURVE('',#4287,#4288,#754,.T.);
++#5982=EDGE_CURVE('',#4288,#4290,#758,.T.);
++#5984=EDGE_CURVE('',#4300,#4290,#1900,.T.);
++#5987=EDGE_CURVE('',#4323,#4324,#1371,.T.);
++#5989=EDGE_CURVE('',#4327,#4323,#914,.T.);
++#5991=EDGE_CURVE('',#4327,#4328,#1344,.T.);
++#5995=EDGE_CURVE('',#4747,#4748,#667,.T.);
++#5997=EDGE_CURVE('',#4748,#4747,#672,.T.);
++#6001=EDGE_CURVE('',#4735,#4736,#677,.T.);
++#6003=EDGE_CURVE('',#4736,#4735,#682,.T.);
++#6007=EDGE_CURVE('',#4755,#4756,#687,.T.);
++#6009=EDGE_CURVE('',#4756,#4755,#692,.T.);
++#6013=EDGE_CURVE('',#4763,#4764,#697,.T.);
++#6015=EDGE_CURVE('',#4764,#4763,#702,.T.);
++#6019=EDGE_CURVE('',#4731,#4732,#707,.T.);
++#6021=EDGE_CURVE('',#4732,#4731,#712,.T.);
++#6025=EDGE_CURVE('',#4723,#4724,#717,.T.);
++#6027=EDGE_CURVE('',#4724,#4723,#722,.T.);
++#6031=EDGE_CURVE('',#4703,#4704,#727,.T.);
++#6033=EDGE_CURVE('',#4704,#4703,#732,.T.);
++#6037=EDGE_CURVE('',#4715,#4716,#737,.T.);
++#6039=EDGE_CURVE('',#4716,#4715,#742,.T.);
++#6043=EDGE_CURVE('',#4947,#4959,#762,.T.);
++#6045=EDGE_CURVE('',#4955,#4959,#3213,.T.);
++#6047=EDGE_CURVE('',#4955,#4967,#766,.T.);
++#6049=EDGE_CURVE('',#4963,#4967,#3195,.T.);
++#6051=EDGE_CURVE('',#4963,#4975,#770,.T.);
++#6053=EDGE_CURVE('',#4971,#4975,#3177,.T.);
++#6055=EDGE_CURVE('',#4971,#4951,#774,.T.);
++#6057=EDGE_CURVE('',#4947,#4951,#3159,.T.);
++#6061=EDGE_CURVE('',#5036,#5048,#778,.T.);
++#6063=EDGE_CURVE('',#5040,#5036,#3256,.T.);
++#6065=EDGE_CURVE('',#5028,#5040,#782,.T.);
++#6067=EDGE_CURVE('',#5032,#5028,#3290,.T.);
++#6069=EDGE_CURVE('',#5052,#5032,#786,.T.);
++#6071=EDGE_CURVE('',#5056,#5052,#3308,.T.);
++#6073=EDGE_CURVE('',#5044,#5056,#790,.T.);
++#6075=EDGE_CURVE('',#5048,#5044,#3326,.T.);
++#6086=EDGE_CURVE('',#4747,#4743,#794,.T.);
++#6088=EDGE_CURVE('',#4743,#4744,#803,.T.);
++#6090=EDGE_CURVE('',#4748,#4744,#798,.T.);
++#6102=EDGE_CURVE('',#4744,#4743,#808,.T.);
++#6124=EDGE_CURVE('',#4735,#4739,#812,.T.);
++#6126=EDGE_CURVE('',#4739,#4740,#821,.T.);
++#6128=EDGE_CURVE('',#4736,#4740,#816,.T.);
++#6140=EDGE_CURVE('',#4740,#4739,#826,.T.);
++#6151=EDGE_CURVE('',#4934,#4940,#830,.T.);
++#6153=EDGE_CURVE('',#4940,#4942,#834,.T.);
++#6155=EDGE_CURVE('',#4938,#4942,#838,.T.);
++#6157=EDGE_CURVE('',#4788,#4938,#1234,.T.);
++#6159=EDGE_CURVE('',#4788,#4393,#842,.T.);
++#6161=EDGE_CURVE('',#4393,#4394,#846,.T.);
++#6163=EDGE_CURVE('',#4394,#4396,#850,.T.);
++#6165=EDGE_CURVE('',#4396,#4398,#854,.T.);
++#6167=EDGE_CURVE('',#4934,#4398,#1178,.T.);
++#6175=EDGE_CURVE('',#5103,#5099,#2946,.T.);
++#6177=EDGE_CURVE('',#5076,#5103,#858,.T.);
++#6179=EDGE_CURVE('',#5080,#5076,#3036,.T.);
++#6181=EDGE_CURVE('',#5084,#5080,#862,.T.);
++#6183=EDGE_CURVE('',#5088,#5084,#3018,.T.);
++#6185=EDGE_CURVE('',#5092,#5088,#866,.T.);
++#6187=EDGE_CURVE('',#5096,#5092,#3000,.T.);
++#6189=EDGE_CURVE('',#5068,#5096,#870,.T.);
++#6191=EDGE_CURVE('',#5072,#5068,#2982,.T.);
++#6193=EDGE_CURVE('',#5060,#5072,#874,.T.);
++#6195=EDGE_CURVE('',#5064,#5060,#2964,.T.);
++#6197=EDGE_CURVE('',#5099,#5064,#878,.T.);
++#6207=EDGE_CURVE('',#4933,#4934,#1174,.T.);
++#6209=EDGE_CURVE('',#4940,#4933,#882,.T.);
++#6221=EDGE_CURVE('',#4432,#4428,#1312,.T.);
++#6223=EDGE_CURVE('',#4267,#4432,#1326,.T.);
++#6225=EDGE_CURVE('',#4267,#4263,#910,.T.);
++#6227=EDGE_CURVE('',#4331,#4263,#1331,.T.);
++#6229=EDGE_CURVE('',#4327,#4331,#1349,.T.);
++#6232=EDGE_CURVE('',#4319,#4323,#1367,.T.);
++#6234=EDGE_CURVE('',#4256,#4319,#918,.T.);
++#6236=EDGE_CURVE('',#4256,#4260,#1638,.T.);
++#6238=EDGE_CURVE('',#4240,#4260,#922,.T.);
++#6240=EDGE_CURVE('',#4240,#4244,#1622,.T.);
++#6242=EDGE_CURVE('',#4420,#4244,#926,.T.);
++#6244=EDGE_CURVE('',#4424,#4420,#1606,.T.);
++#6248=EDGE_CURVE('',#4495,#4496,#951,.T.);
++#6250=EDGE_CURVE('',#4496,#4495,#956,.T.);
++#6254=EDGE_CURVE('',#4567,#4568,#981,.T.);
++#6256=EDGE_CURVE('',#4568,#4567,#986,.T.);
++#6260=EDGE_CURVE('',#4615,#4616,#1011,.T.);
++#6262=EDGE_CURVE('',#4616,#4615,#1016,.T.);
++#6266=EDGE_CURVE('',#4647,#4648,#1021,.T.);
++#6268=EDGE_CURVE('',#4648,#4647,#1026,.T.);
++#6272=EDGE_CURVE('',#4659,#4660,#1031,.T.);
++#6274=EDGE_CURVE('',#4660,#4659,#1036,.T.);
++#6286=EDGE_CURVE('',#4398,#4447,#1182,.T.);
++#6288=EDGE_CURVE('',#4443,#4447,#1646,.T.);
++#6290=EDGE_CURVE('',#4443,#4407,#1186,.T.);
++#6292=EDGE_CURVE('',#4403,#4407,#1547,.T.);
++#6294=EDGE_CURVE('',#4232,#4403,#1190,.T.);
++#6296=EDGE_CURVE('',#4232,#4236,#1572,.T.);
++#6298=EDGE_CURVE('',#4248,#4236,#1194,.T.);
++#6300=EDGE_CURVE('',#4248,#4252,#1588,.T.);
++#6302=EDGE_CURVE('',#4312,#4252,#1198,.T.);
++#6304=EDGE_CURVE('',#4316,#4312,#1394,.T.);
++#6306=EDGE_CURVE('',#4344,#4316,#1202,.T.);
++#6308=EDGE_CURVE('',#4344,#4348,#1920,.T.);
++#6310=EDGE_CURVE('',#4298,#4348,#1206,.T.);
++#6312=EDGE_CURVE('',#4298,#4920,#1210,.T.);
++#6314=EDGE_CURVE('',#4919,#4920,#1214,.T.);
++#6316=EDGE_CURVE('',#4919,#4923,#1218,.T.);
++#6318=EDGE_CURVE('',#4923,#4924,#1222,.T.);
++#6320=EDGE_CURVE('',#4924,#4786,#1226,.T.);
++#6322=EDGE_CURVE('',#4767,#4786,#1742,.T.);
++#6325=EDGE_CURVE('',#4768,#4788,#1694,.T.);
++#6328=EDGE_CURVE('',#4937,#4938,#1238,.T.);
++#6330=EDGE_CURVE('',#4933,#4937,#1242,.T.);
++#6334=EDGE_CURVE('',#4373,#4374,#887,.T.);
++#6336=EDGE_CURVE('',#4374,#4373,#892,.T.);
++#6340=EDGE_CURVE('',#4383,#4384,#897,.T.);
++#6342=EDGE_CURVE('',#4384,#4383,#902,.T.);
++#6346=EDGE_CURVE('',#4473,#4474,#931,.T.);
++#6348=EDGE_CURVE('',#4474,#4473,#936,.T.);
++#6352=EDGE_CURVE('',#4483,#4484,#941,.T.);
++#6354=EDGE_CURVE('',#4484,#4483,#946,.T.);
++#6358=EDGE_CURVE('',#4543,#4544,#961,.T.);
++#6360=EDGE_CURVE('',#4544,#4543,#966,.T.);
++#6364=EDGE_CURVE('',#4555,#4556,#971,.T.);
++#6366=EDGE_CURVE('',#4556,#4555,#976,.T.);
++#6370=EDGE_CURVE('',#4587,#4588,#991,.T.);
++#6372=EDGE_CURVE('',#4588,#4587,#996,.T.);
++#6376=EDGE_CURVE('',#4599,#4600,#1001,.T.);
++#6378=EDGE_CURVE('',#4600,#4599,#1006,.T.);
++#6382=EDGE_CURVE('',#4671,#4672,#1041,.T.);
++#6384=EDGE_CURVE('',#4672,#4671,#1046,.T.);
++#6388=EDGE_CURVE('',#4683,#4684,#1051,.T.);
++#6390=EDGE_CURVE('',#4684,#4683,#1056,.T.);
++#6394=EDGE_CURVE('',#4695,#4696,#1061,.T.);
++#6396=EDGE_CURVE('',#4696,#4695,#1066,.T.);
++#6400=EDGE_CURVE('',#4279,#4800,#1070,.T.);
++#6402=EDGE_CURVE('',#4804,#4800,#1448,.T.);
++#6404=EDGE_CURVE('',#4795,#4804,#1074,.T.);
++#6406=EDGE_CURVE('',#4791,#4795,#1421,.T.);
++#6408=EDGE_CURVE('',#4791,#4275,#1078,.T.);
++#6410=EDGE_CURVE('',#4271,#4275,#1475,.T.);
++#6412=EDGE_CURVE('',#4271,#4283,#1082,.T.);
++#6414=EDGE_CURVE('',#4279,#4283,#1457,.T.);
++#6418=EDGE_CURVE('',#4811,#4820,#1086,.T.);
++#6420=EDGE_CURVE('',#4807,#4811,#1493,.T.);
++#6422=EDGE_CURVE('',#4807,#4412,#1090,.T.);
++#6424=EDGE_CURVE('',#4416,#4412,#1538,.T.);
++#6426=EDGE_CURVE('',#4416,#4439,#1094,.T.);
++#6428=EDGE_CURVE('',#4435,#4439,#2124,.T.);
++#6430=EDGE_CURVE('',#4435,#4780,#1098,.T.);
++#6432=EDGE_CURVE('',#4784,#4780,#1716,.T.);
++#6434=EDGE_CURVE('',#4775,#4784,#1720,.T.);
++#6436=EDGE_CURVE('',#4771,#4775,#1729,.T.);
++#6438=EDGE_CURVE('',#4336,#4771,#1102,.T.);
++#6440=EDGE_CURVE('',#4336,#4340,#1762,.T.);
++#6442=EDGE_CURVE('',#4307,#4340,#1106,.T.);
++#6444=EDGE_CURVE('',#4303,#4307,#1403,.T.);
++#6446=EDGE_CURVE('',#4303,#4816,#1110,.T.);
++#6448=EDGE_CURVE('',#4820,#4816,#1520,.T.);
++#6452=EDGE_CURVE('',#4831,#4832,#1115,.T.);
++#6454=EDGE_CURVE('',#4832,#4831,#1120,.T.);
++#6458=EDGE_CURVE('',#4863,#4864,#1125,.T.);
++#6460=EDGE_CURVE('',#4864,#4863,#1130,.T.);
++#6464=EDGE_CURVE('',#4875,#4876,#1135,.T.);
++#6466=EDGE_CURVE('',#4876,#4875,#1140,.T.);
++#6470=EDGE_CURVE('',#4887,#4888,#1145,.T.);
++#6472=EDGE_CURVE('',#4888,#4887,#1150,.T.);
++#6476=EDGE_CURVE('',#4899,#4900,#1155,.T.);
++#6478=EDGE_CURVE('',#4900,#4899,#1160,.T.);
++#6482=EDGE_CURVE('',#4911,#4912,#1165,.T.);
++#6484=EDGE_CURVE('',#4912,#4911,#1170,.T.);
++#6495=EDGE_CURVE('',#4368,#4374,#1250,.T.);
++#6497=EDGE_CURVE('',#4370,#4368,#1268,.T.);
++#6499=EDGE_CURVE('',#4370,#4373,#1246,.T.);
++#6511=EDGE_CURVE('',#4370,#4368,#1259,.T.);
++#6522=EDGE_CURVE('',#4367,#4368,#1254,.T.);
++#6525=EDGE_CURVE('',#4367,#4370,#1263,.T.);
++#6547=EDGE_CURVE('',#4378,#4384,#1276,.T.);
++#6549=EDGE_CURVE('',#4380,#4378,#1294,.T.);
++#6551=EDGE_CURVE('',#4380,#4383,#1272,.T.);
++#6563=EDGE_CURVE('',#4380,#4378,#1285,.T.);
++#6574=EDGE_CURVE('',#4377,#4378,#1280,.T.);
++#6577=EDGE_CURVE('',#4377,#4380,#1289,.T.);
++#6600=EDGE_CURVE('',#4431,#4432,#1307,.T.);
++#6613=EDGE_CURVE('',#4267,#4268,#1321,.T.);
++#6624=EDGE_CURVE('',#4263,#4264,#1335,.T.);
++#6637=EDGE_CURVE('',#4331,#4332,#1353,.T.);
++#6662=EDGE_CURVE('',#4319,#4320,#1362,.T.);
++#6675=EDGE_CURVE('',#4311,#4312,#1380,.T.);
++#6678=EDGE_CURVE('',#4251,#4252,#1584,.T.);
++#6691=EDGE_CURVE('',#4255,#4256,#1626,.T.);
++#6704=EDGE_CURVE('',#4315,#4316,#1389,.T.);
++#6715=EDGE_CURVE('',#4307,#4308,#1407,.T.);
++#6718=EDGE_CURVE('',#4339,#4340,#1758,.T.);
++#6731=EDGE_CURVE('',#4343,#4344,#1908,.T.);
++#6742=EDGE_CURVE('',#4303,#4304,#1398,.T.);
++#6755=EDGE_CURVE('',#4791,#4792,#1416,.T.);
++#6758=EDGE_CURVE('',#4275,#4276,#1479,.T.);
++#6769=EDGE_CURVE('',#4815,#4816,#1506,.T.);
++#6784=EDGE_CURVE('',#4795,#4796,#1425,.T.);
++#6797=EDGE_CURVE('',#4803,#4804,#1443,.T.);
++#6808=EDGE_CURVE('',#4799,#4800,#1434,.T.);
++#6823=EDGE_CURVE('',#4279,#4280,#1452,.T.);
++#6834=EDGE_CURVE('',#4807,#4808,#1488,.T.);
++#6837=EDGE_CURVE('',#4411,#4412,#1524,.T.);
++#6850=EDGE_CURVE('',#4283,#4284,#1461,.T.);
++#6861=EDGE_CURVE('',#4271,#4272,#1470,.T.);
++#6888=EDGE_CURVE('',#4811,#4812,#1497,.T.);
++#6901=EDGE_CURVE('',#4819,#4820,#1515,.T.);
++#6926=EDGE_CURVE('',#4415,#4416,#1533,.T.);
++#6937=EDGE_CURVE('',#4407,#4408,#1551,.T.);
++#6940=EDGE_CURVE('',#4443,#4444,#1642,.T.);
++#6953=EDGE_CURVE('',#4439,#4440,#2128,.T.);
++#6964=EDGE_CURVE('',#4403,#4404,#1542,.T.);
++#6979=EDGE_CURVE('',#4231,#4232,#1560,.T.);
++#6990=EDGE_CURVE('',#4419,#4420,#1592,.T.);
++#6993=EDGE_CURVE('',#4243,#4244,#1618,.T.);
++#7006=EDGE_CURVE('',#4235,#4236,#1568,.T.);
++#7018=EDGE_CURVE('',#4247,#4248,#1576,.T.);
++#7054=EDGE_CURVE('',#4239,#4240,#1610,.T.);
++#7070=EDGE_CURVE('',#4259,#4260,#1634,.T.);
++#7094=EDGE_CURVE('',#4447,#4448,#1650,.T.);
++#7110=EDGE_CURVE('',#4390,#4396,#1662,.T.);
++#7123=EDGE_CURVE('',#4387,#4394,#1666,.T.);
++#7136=EDGE_CURVE('',#4388,#4393,#1670,.T.);
++#7140=EDGE_CURVE('',#4455,#4456,#1675,.T.);
++#7142=EDGE_CURVE('',#4456,#4455,#1680,.T.);
++#7146=EDGE_CURVE('',#4463,#4464,#1685,.T.);
++#7148=EDGE_CURVE('',#4464,#4463,#1690,.T.);
++#7158=EDGE_CURVE('',#4779,#4780,#1702,.T.);
++#7161=EDGE_CURVE('',#4435,#4436,#2120,.T.);
++#7186=EDGE_CURVE('',#4783,#4784,#1711,.T.);
++#7197=EDGE_CURVE('',#4775,#4776,#1733,.T.);
++#7210=EDGE_CURVE('',#4771,#4772,#1724,.T.);
++#7225=EDGE_CURVE('',#4335,#4336,#1750,.T.);
++#7237=EDGE_CURVE('',#4786,#4293,#1792,.T.);
++#7239=EDGE_CURVE('',#4287,#4293,#1928,.T.);
++#7262=EDGE_CURVE('',#4920,#4926,#1776,.T.);
++#7265=EDGE_CURVE('',#4296,#4298,#1780,.T.);
++#7267=EDGE_CURVE('',#4294,#4296,#1784,.T.);
++#7269=EDGE_CURVE('',#4293,#4294,#1788,.T.);
++#7273=EDGE_CURVE('',#4924,#4928,#1796,.T.);
++#7275=EDGE_CURVE('',#4926,#4928,#1800,.T.);
++#7279=EDGE_CURVE('',#4707,#4708,#1767,.T.);
++#7281=EDGE_CURVE('',#4708,#4707,#1772,.T.);
++#7285=EDGE_CURVE('',#5020,#5022,#1993,.T.);
++#7287=EDGE_CURVE('',#5020,#4983,#1804,.T.);
++#7289=EDGE_CURVE('',#4979,#4983,#2107,.T.);
++#7291=EDGE_CURVE('',#4979,#4991,#1808,.T.);
++#7293=EDGE_CURVE('',#4987,#4991,#2089,.T.);
++#7295=EDGE_CURVE('',#4987,#5015,#1812,.T.);
++#7297=EDGE_CURVE('',#5011,#5015,#2071,.T.);
++#7299=EDGE_CURVE('',#5011,#5007,#1816,.T.);
++#7301=EDGE_CURVE('',#5003,#5007,#2053,.T.);
++#7303=EDGE_CURVE('',#5003,#4999,#1820,.T.);
++#7305=EDGE_CURVE('',#4995,#4999,#2035,.T.);
++#7307=EDGE_CURVE('',#4995,#5022,#1824,.T.);
++#7318=EDGE_CURVE('',#4704,#4708,#1832,.T.);
++#7321=EDGE_CURVE('',#4703,#4707,#1828,.T.);
++#7345=EDGE_CURVE('',#4926,#4919,#1836,.T.);
++#7358=EDGE_CURVE('',#4928,#4923,#1860,.T.);
++#7362=EDGE_CURVE('',#4929,#4930,#1846,.T.);
++#7364=EDGE_CURVE('',#4930,#4929,#1856,.T.);
++#7385=EDGE_CURVE('',#4930,#4531,#1868,.T.);
++#7388=EDGE_CURVE('',#4532,#4929,#1864,.T.);
++#7390=EDGE_CURVE('',#4531,#4532,#1873,.T.);
++#7403=EDGE_CURVE('',#4532,#4531,#1878,.T.);
++#7417=EDGE_CURVE('',#4535,#4536,#1883,.T.);
++#7419=EDGE_CURVE('',#4536,#4535,#1888,.T.);
++#7430=EDGE_CURVE('',#4536,#4504,#1896,.T.);
++#7433=EDGE_CURVE('',#4535,#4503,#1892,.T.);
++#7457=EDGE_CURVE('',#4347,#4348,#1916,.T.);
++#7461=EDGE_CURVE('',#4290,#4296,#1904,.T.);
++#7484=EDGE_CURVE('',#4288,#4294,#1924,.T.);
++#7502=EDGE_CURVE('',#4355,#4356,#1933,.T.);
++#7504=EDGE_CURVE('',#4356,#4355,#1938,.T.);
++#7508=EDGE_CURVE('',#4363,#4364,#1943,.T.);
++#7510=EDGE_CURVE('',#4364,#4363,#1948,.T.);
++#7521=EDGE_CURVE('',#4356,#4352,#1956,.T.);
++#7523=EDGE_CURVE('',#4351,#4352,#1961,.T.);
++#7525=EDGE_CURVE('',#4355,#4351,#1952,.T.);
++#7537=EDGE_CURVE('',#4352,#4351,#1966,.T.);
++#7559=EDGE_CURVE('',#4364,#4360,#1974,.T.);
++#7561=EDGE_CURVE('',#4359,#4360,#1979,.T.);
++#7563=EDGE_CURVE('',#4363,#4359,#1970,.T.);
++#7575=EDGE_CURVE('',#4360,#4359,#1984,.T.);
++#7596=EDGE_CURVE('',#5019,#5020,#1988,.T.);
++#7599=EDGE_CURVE('',#5024,#5022,#1997,.T.);
++#7601=EDGE_CURVE('',#5024,#5019,#2002,.T.);
++#7612=EDGE_CURVE('',#5019,#4984,#2006,.T.);
++#7614=EDGE_CURVE('',#4983,#4984,#2111,.T.);
++#7627=EDGE_CURVE('',#4996,#5024,#2010,.T.);
++#7629=EDGE_CURVE('',#5000,#4996,#2044,.T.);
++#7631=EDGE_CURVE('',#5004,#5000,#2014,.T.);
++#7633=EDGE_CURVE('',#5008,#5004,#2062,.T.);
++#7635=EDGE_CURVE('',#5012,#5008,#2018,.T.);
++#7637=EDGE_CURVE('',#5016,#5012,#2080,.T.);
++#7639=EDGE_CURVE('',#4988,#5016,#2022,.T.);
++#7641=EDGE_CURVE('',#4992,#4988,#2098,.T.);
++#7643=EDGE_CURVE('',#4980,#4992,#2026,.T.);
++#7645=EDGE_CURVE('',#4984,#4980,#2116,.T.);
++#7657=EDGE_CURVE('',#4995,#4996,#2030,.T.);
++#7670=EDGE_CURVE('',#4999,#5000,#2039,.T.);
++#7683=EDGE_CURVE('',#5003,#5004,#2048,.T.);
++#7696=EDGE_CURVE('',#5007,#5008,#2057,.T.);
++#7709=EDGE_CURVE('',#5011,#5012,#2066,.T.);
++#7722=EDGE_CURVE('',#5015,#5016,#2075,.T.);
++#7733=EDGE_CURVE('',#4987,#4988,#2084,.T.);
++#7748=EDGE_CURVE('',#4991,#4992,#2093,.T.);
++#7759=EDGE_CURVE('',#4979,#4980,#2102,.T.);
++#7797=EDGE_CURVE('',#4455,#4451,#2136,.T.);
++#7799=EDGE_CURVE('',#4451,#4452,#2145,.T.);
++#7801=EDGE_CURVE('',#4456,#4452,#2140,.T.);
++#7813=EDGE_CURVE('',#4452,#4451,#2150,.T.);
++#7835=EDGE_CURVE('',#4463,#4459,#2154,.T.);
++#7837=EDGE_CURVE('',#4459,#4460,#2163,.T.);
++#7839=EDGE_CURVE('',#4464,#4460,#2158,.T.);
++#7851=EDGE_CURVE('',#4460,#4459,#2168,.T.);
++#7873=EDGE_CURVE('',#4470,#4473,#2176,.T.);
++#7875=EDGE_CURVE('',#4470,#4468,#2194,.T.);
++#7877=EDGE_CURVE('',#4468,#4474,#2172,.T.);
++#7889=EDGE_CURVE('',#4470,#4468,#2189,.T.);
++#7900=EDGE_CURVE('',#4467,#4468,#2180,.T.);
++#7902=EDGE_CURVE('',#4467,#4470,#2184,.T.);
++#7925=EDGE_CURVE('',#4480,#4483,#2202,.T.);
++#7927=EDGE_CURVE('',#4480,#4478,#2220,.T.);
++#7929=EDGE_CURVE('',#4478,#4484,#2198,.T.);
++#7941=EDGE_CURVE('',#4480,#4478,#2215,.T.);
++#7952=EDGE_CURVE('',#4477,#4478,#2206,.T.);
++#7954=EDGE_CURVE('',#4477,#4480,#2210,.T.);
++#7977=EDGE_CURVE('',#4496,#4492,#2228,.T.);
++#7979=EDGE_CURVE('',#4491,#4492,#2233,.T.);
++#7981=EDGE_CURVE('',#4495,#4491,#2224,.T.);
++#7993=EDGE_CURVE('',#4492,#4491,#2238,.T.);
++#8008=EDGE_CURVE('',#4499,#4500,#2243,.T.);
++#8010=EDGE_CURVE('',#4500,#4499,#2248,.T.);
++#8021=EDGE_CURVE('',#4500,#4488,#2256,.T.);
++#8024=EDGE_CURVE('',#4499,#4487,#2252,.T.);
++#8047=EDGE_CURVE('',#4544,#4540,#2264,.T.);
++#8049=EDGE_CURVE('',#4539,#4540,#2269,.T.);
++#8051=EDGE_CURVE('',#4543,#4539,#2260,.T.);
++#8063=EDGE_CURVE('',#4540,#4539,#2274,.T.);
++#8078=EDGE_CURVE('',#4547,#4548,#2279,.T.);
++#8080=EDGE_CURVE('',#4548,#4547,#2284,.T.);
++#8091=EDGE_CURVE('',#4548,#4508,#2292,.T.);
++#8094=EDGE_CURVE('',#4547,#4507,#2288,.T.);
++#8117=EDGE_CURVE('',#4556,#4552,#2300,.T.);
++#8119=EDGE_CURVE('',#4551,#4552,#2305,.T.);
++#8121=EDGE_CURVE('',#4555,#4551,#2296,.T.);
++#8133=EDGE_CURVE('',#4552,#4551,#2310,.T.);
++#8148=EDGE_CURVE('',#4559,#4560,#2315,.T.);
++#8150=EDGE_CURVE('',#4560,#4559,#2320,.T.);
++#8161=EDGE_CURVE('',#4560,#4512,#2328,.T.);
++#8164=EDGE_CURVE('',#4559,#4511,#2324,.T.);
++#8187=EDGE_CURVE('',#4568,#4564,#2336,.T.);
++#8189=EDGE_CURVE('',#4563,#4564,#2341,.T.);
++#8191=EDGE_CURVE('',#4567,#4563,#2332,.T.);
++#8203=EDGE_CURVE('',#4564,#4563,#2346,.T.);
++#8218=EDGE_CURVE('',#4571,#4572,#2351,.T.);
++#8220=EDGE_CURVE('',#4572,#4571,#2356,.T.);
++#8231=EDGE_CURVE('',#4572,#4516,#2364,.T.);
++#8234=EDGE_CURVE('',#4571,#4515,#2360,.T.);
++#8257=EDGE_CURVE('',#4588,#4584,#2372,.T.);
++#8259=EDGE_CURVE('',#4583,#4584,#2377,.T.);
++#8261=EDGE_CURVE('',#4587,#4583,#2368,.T.);
++#8273=EDGE_CURVE('',#4584,#4583,#2382,.T.);
++#8288=EDGE_CURVE('',#4591,#4592,#2387,.T.);
++#8290=EDGE_CURVE('',#4592,#4591,#2392,.T.);
++#8301=EDGE_CURVE('',#4592,#4524,#2400,.T.);
++#8304=EDGE_CURVE('',#4591,#4523,#2396,.T.);
++#8327=EDGE_CURVE('',#4600,#4596,#2408,.T.);
++#8329=EDGE_CURVE('',#4595,#4596,#2413,.T.);
++#8331=EDGE_CURVE('',#4599,#4595,#2404,.T.);
++#8343=EDGE_CURVE('',#4596,#4595,#2418,.T.);
++#8358=EDGE_CURVE('',#4603,#4604,#2423,.T.);
++#8360=EDGE_CURVE('',#4604,#4603,#2428,.T.);
++#8371=EDGE_CURVE('',#4604,#4528,#2436,.T.);
++#8374=EDGE_CURVE('',#4603,#4527,#2432,.T.);
++#8397=EDGE_CURVE('',#4616,#4612,#2444,.T.);
++#8399=EDGE_CURVE('',#4611,#4612,#2449,.T.);
++#8401=EDGE_CURVE('',#4615,#4611,#2440,.T.);
++#8413=EDGE_CURVE('',#4612,#4611,#2454,.T.);
++#8428=EDGE_CURVE('',#4619,#4620,#2459,.T.);
++#8430=EDGE_CURVE('',#4620,#4619,#2464,.T.);
++#8441=EDGE_CURVE('',#4620,#4608,#2472,.T.);
++#8444=EDGE_CURVE('',#4619,#4607,#2468,.T.);
++#8467=EDGE_CURVE('',#4648,#4644,#2480,.T.);
++#8469=EDGE_CURVE('',#4643,#4644,#2485,.T.);
++#8471=EDGE_CURVE('',#4647,#4643,#2476,.T.);
++#8483=EDGE_CURVE('',#4644,#4643,#2490,.T.);
++#8498=EDGE_CURVE('',#4651,#4652,#2495,.T.);
++#8500=EDGE_CURVE('',#4652,#4651,#2500,.T.);
++#8511=EDGE_CURVE('',#4652,#4624,#2508,.T.);
++#8514=EDGE_CURVE('',#4651,#4623,#2504,.T.);
++#8537=EDGE_CURVE('',#4660,#4656,#2516,.T.);
++#8539=EDGE_CURVE('',#4655,#4656,#2521,.T.);
++#8541=EDGE_CURVE('',#4659,#4655,#2512,.T.);
++#8553=EDGE_CURVE('',#4656,#4655,#2526,.T.);
++#8568=EDGE_CURVE('',#4663,#4664,#2531,.T.);
++#8570=EDGE_CURVE('',#4664,#4663,#2536,.T.);
++#8581=EDGE_CURVE('',#4664,#4636,#2544,.T.);
++#8584=EDGE_CURVE('',#4663,#4635,#2540,.T.);
++#8607=EDGE_CURVE('',#4672,#4668,#2552,.T.);
++#8609=EDGE_CURVE('',#4667,#4668,#2557,.T.);
++#8611=EDGE_CURVE('',#4671,#4667,#2548,.T.);
++#8623=EDGE_CURVE('',#4668,#4667,#2562,.T.);
++#8638=EDGE_CURVE('',#4675,#4676,#2567,.T.);
++#8640=EDGE_CURVE('',#4676,#4675,#2572,.T.);
++#8651=EDGE_CURVE('',#4676,#4628,#2580,.T.);
++#8654=EDGE_CURVE('',#4675,#4627,#2576,.T.);
++#8677=EDGE_CURVE('',#4684,#4680,#2588,.T.);
++#8679=EDGE_CURVE('',#4679,#4680,#2593,.T.);
++#8681=EDGE_CURVE('',#4683,#4679,#2584,.T.);
++#8693=EDGE_CURVE('',#4680,#4679,#2598,.T.);
++#8708=EDGE_CURVE('',#4687,#4688,#2603,.T.);
++#8710=EDGE_CURVE('',#4688,#4687,#2608,.T.);
++#8721=EDGE_CURVE('',#4688,#4632,#2616,.T.);
++#8724=EDGE_CURVE('',#4687,#4631,#2612,.T.);
++#8747=EDGE_CURVE('',#4696,#4692,#2624,.T.);
++#8749=EDGE_CURVE('',#4691,#4692,#2629,.T.);
++#8751=EDGE_CURVE('',#4695,#4691,#2620,.T.);
++#8763=EDGE_CURVE('',#4692,#4691,#2634,.T.);
++#8778=EDGE_CURVE('',#4699,#4700,#2639,.T.);
++#8780=EDGE_CURVE('',#4700,#4699,#2644,.T.);
++#8791=EDGE_CURVE('',#4700,#4640,#2652,.T.);
++#8794=EDGE_CURVE('',#4699,#4639,#2648,.T.);
++#8817=EDGE_CURVE('',#4832,#4828,#2660,.T.);
++#8819=EDGE_CURVE('',#4827,#4828,#2665,.T.);
++#8821=EDGE_CURVE('',#4831,#4827,#2656,.T.);
++#8833=EDGE_CURVE('',#4828,#4827,#2670,.T.);
++#8848=EDGE_CURVE('',#4835,#4836,#2675,.T.);
++#8850=EDGE_CURVE('',#4836,#4835,#2680,.T.);
++#8861=EDGE_CURVE('',#4836,#4824,#2688,.T.);
++#8864=EDGE_CURVE('',#4835,#4823,#2684,.T.);
++#8887=EDGE_CURVE('',#4864,#4860,#2696,.T.);
++#8889=EDGE_CURVE('',#4859,#4860,#2701,.T.);
++#8891=EDGE_CURVE('',#4863,#4859,#2692,.T.);
++#8903=EDGE_CURVE('',#4860,#4859,#2706,.T.);
++#8918=EDGE_CURVE('',#4867,#4868,#2711,.T.);
++#8920=EDGE_CURVE('',#4868,#4867,#2716,.T.);
++#8931=EDGE_CURVE('',#4868,#4840,#2724,.T.);
++#8934=EDGE_CURVE('',#4867,#4839,#2720,.T.);
++#8957=EDGE_CURVE('',#4876,#4872,#2732,.T.);
++#8959=EDGE_CURVE('',#4871,#4872,#2737,.T.);
++#8961=EDGE_CURVE('',#4875,#4871,#2728,.T.);
++#8973=EDGE_CURVE('',#4872,#4871,#2742,.T.);
++#8988=EDGE_CURVE('',#4879,#4880,#2747,.T.);
++#8990=EDGE_CURVE('',#4880,#4879,#2752,.T.);
++#9001=EDGE_CURVE('',#4880,#4844,#2760,.T.);
++#9004=EDGE_CURVE('',#4879,#4843,#2756,.T.);
++#9027=EDGE_CURVE('',#4888,#4884,#2768,.T.);
++#9029=EDGE_CURVE('',#4883,#4884,#2773,.T.);
++#9031=EDGE_CURVE('',#4887,#4883,#2764,.T.);
++#9043=EDGE_CURVE('',#4884,#4883,#2778,.T.);
++#9058=EDGE_CURVE('',#4891,#4892,#2783,.T.);
++#9060=EDGE_CURVE('',#4892,#4891,#2788,.T.);
++#9071=EDGE_CURVE('',#4892,#4848,#2796,.T.);
++#9074=EDGE_CURVE('',#4891,#4847,#2792,.T.);
++#9097=EDGE_CURVE('',#4900,#4896,#2804,.T.);
++#9099=EDGE_CURVE('',#4895,#4896,#2809,.T.);
++#9101=EDGE_CURVE('',#4899,#4895,#2800,.T.);
++#9113=EDGE_CURVE('',#4896,#4895,#2814,.T.);
++#9128=EDGE_CURVE('',#4903,#4904,#2819,.T.);
++#9130=EDGE_CURVE('',#4904,#4903,#2824,.T.);
++#9141=EDGE_CURVE('',#4904,#4852,#2832,.T.);
++#9144=EDGE_CURVE('',#4903,#4851,#2828,.T.);
++#9167=EDGE_CURVE('',#4912,#4908,#2840,.T.);
++#9169=EDGE_CURVE('',#4907,#4908,#2845,.T.);
++#9171=EDGE_CURVE('',#4911,#4907,#2836,.T.);
++#9183=EDGE_CURVE('',#4908,#4907,#2850,.T.);
++#9198=EDGE_CURVE('',#4915,#4916,#2855,.T.);
++#9200=EDGE_CURVE('',#4916,#4915,#2860,.T.);
++#9211=EDGE_CURVE('',#4916,#4856,#2868,.T.);
++#9214=EDGE_CURVE('',#4915,#4855,#2864,.T.);
++#9238=EDGE_CURVE('',#4942,#4937,#2872,.T.);
++#9254=EDGE_CURVE('',#4943,#4944,#2882,.T.);
++#9256=EDGE_CURVE('',#4944,#4943,#2892,.T.);
++#9266=EDGE_CURVE('',#4943,#4575,#2900,.T.);
++#9269=EDGE_CURVE('',#4576,#4944,#2896,.T.);
++#9271=EDGE_CURVE('',#4575,#4576,#2905,.T.);
++#9284=EDGE_CURVE('',#4576,#4575,#2910,.T.);
++#9298=EDGE_CURVE('',#4579,#4580,#2915,.T.);
++#9300=EDGE_CURVE('',#4580,#4579,#2920,.T.);
++#9311=EDGE_CURVE('',#4580,#4520,#2928,.T.);
++#9314=EDGE_CURVE('',#4579,#4519,#2924,.T.);
++#9336=EDGE_CURVE('',#5099,#5100,#2932,.T.);
++#9338=EDGE_CURVE('',#5100,#5104,#2937,.T.);
++#9340=EDGE_CURVE('',#5103,#5104,#2941,.T.);
++#9353=EDGE_CURVE('',#5062,#5064,#2959,.T.);
++#9355=EDGE_CURVE('',#5100,#5062,#3044,.T.);
++#9365=EDGE_CURVE('',#5059,#5060,#2950,.T.);
++#9367=EDGE_CURVE('',#5059,#5062,#2955,.T.);
++#9381=EDGE_CURVE('',#5070,#5072,#2977,.T.);
++#9383=EDGE_CURVE('',#5059,#5070,#3048,.T.);
++#9393=EDGE_CURVE('',#5067,#5068,#2968,.T.);
++#9395=EDGE_CURVE('',#5067,#5070,#2973,.T.);
++#9409=EDGE_CURVE('',#5094,#5096,#2995,.T.);
++#9411=EDGE_CURVE('',#5067,#5094,#3052,.T.);
++#9421=EDGE_CURVE('',#5091,#5092,#2986,.T.);
++#9423=EDGE_CURVE('',#5091,#5094,#2991,.T.);
++#9435=EDGE_CURVE('',#5086,#5088,#3013,.T.);
++#9437=EDGE_CURVE('',#5091,#5086,#3056,.T.);
++#9449=EDGE_CURVE('',#5083,#5084,#3004,.T.);
++#9451=EDGE_CURVE('',#5083,#5086,#3009,.T.);
++#9463=EDGE_CURVE('',#5078,#5080,#3031,.T.);
++#9465=EDGE_CURVE('',#5083,#5078,#3060,.T.);
++#9477=EDGE_CURVE('',#5075,#5076,#3022,.T.);
++#9479=EDGE_CURVE('',#5075,#5078,#3027,.T.);
++#9492=EDGE_CURVE('',#5075,#5104,#3040,.T.);
++#9525=EDGE_CURVE('',#4755,#4751,#3064,.T.);
++#9527=EDGE_CURVE('',#4751,#4752,#3073,.T.);
++#9529=EDGE_CURVE('',#4756,#4752,#3068,.T.);
++#9541=EDGE_CURVE('',#4752,#4751,#3078,.T.);
++#9563=EDGE_CURVE('',#4763,#4759,#3082,.T.);
++#9565=EDGE_CURVE('',#4759,#4760,#3091,.T.);
++#9567=EDGE_CURVE('',#4764,#4760,#3086,.T.);
++#9579=EDGE_CURVE('',#4760,#4759,#3096,.T.);
++#9601=EDGE_CURVE('',#4732,#4728,#3104,.T.);
++#9603=EDGE_CURVE('',#4727,#4728,#3109,.T.);
++#9605=EDGE_CURVE('',#4731,#4727,#3100,.T.);
++#9617=EDGE_CURVE('',#4728,#4727,#3114,.T.);
++#9639=EDGE_CURVE('',#4724,#4720,#3122,.T.);
++#9641=EDGE_CURVE('',#4719,#4720,#3127,.T.);
++#9643=EDGE_CURVE('',#4723,#4719,#3118,.T.);
++#9655=EDGE_CURVE('',#4720,#4719,#3132,.T.);
++#9677=EDGE_CURVE('',#4716,#4712,#3140,.T.);
++#9679=EDGE_CURVE('',#4711,#4712,#3145,.T.);
++#9681=EDGE_CURVE('',#4715,#4711,#3136,.T.);
++#9693=EDGE_CURVE('',#4712,#4711,#3150,.T.);
++#9714=EDGE_CURVE('',#4947,#4948,#3154,.T.);
++#9716=EDGE_CURVE('',#4948,#4960,#3238,.T.);
++#9718=EDGE_CURVE('',#4959,#4960,#3217,.T.);
++#9731=EDGE_CURVE('',#4951,#4952,#3163,.T.);
++#9733=EDGE_CURVE('',#4952,#4948,#3168,.T.);
++#9745=EDGE_CURVE('',#4971,#4972,#3172,.T.);
++#9747=EDGE_CURVE('',#4972,#4952,#3226,.T.);
++#9759=EDGE_CURVE('',#4975,#4976,#3181,.T.);
++#9761=EDGE_CURVE('',#4976,#4972,#3186,.T.);
++#9771=EDGE_CURVE('',#4963,#4964,#3190,.T.);
++#9773=EDGE_CURVE('',#4964,#4976,#3230,.T.);
++#9787=EDGE_CURVE('',#4967,#4968,#3199,.T.);
++#9789=EDGE_CURVE('',#4968,#4964,#3204,.T.);
++#9799=EDGE_CURVE('',#4955,#4956,#3208,.T.);
++#9801=EDGE_CURVE('',#4956,#4968,#3234,.T.);
++#9816=EDGE_CURVE('',#4960,#4956,#3222,.T.);
++#9842=EDGE_CURVE('',#5035,#5036,#3242,.T.);
++#9845=EDGE_CURVE('',#5046,#5048,#3321,.T.);
++#9847=EDGE_CURVE('',#5035,#5046,#3264,.T.);
++#9858=EDGE_CURVE('',#5035,#5038,#3247,.T.);
++#9860=EDGE_CURVE('',#5038,#5040,#3251,.T.);
++#9871=EDGE_CURVE('',#5027,#5030,#3281,.T.);
++#9873=EDGE_CURVE('',#5027,#5038,#3260,.T.);
++#9877=EDGE_CURVE('',#5043,#5046,#3317,.T.);
++#9879=EDGE_CURVE('',#5043,#5054,#3268,.T.);
++#9881=EDGE_CURVE('',#5051,#5054,#3299,.T.);
++#9883=EDGE_CURVE('',#5051,#5030,#3272,.T.);
++#9893=EDGE_CURVE('',#5027,#5028,#3276,.T.);
++#9896=EDGE_CURVE('',#5030,#5032,#3285,.T.);
++#9921=EDGE_CURVE('',#5051,#5052,#3294,.T.);
++#9934=EDGE_CURVE('',#5054,#5056,#3303,.T.);
++#9945=EDGE_CURVE('',#5043,#5044,#3312,.T.);
++#9971=EDGE_CURVE('',#5121,#5107,#3330,.T.);
++#9973=EDGE_CURVE('',#5107,#5108,#3346,.T.);
++#9975=EDGE_CURVE('',#5122,#5108,#3342,.T.);
++#9986=EDGE_CURVE('',#5126,#5112,#3334,.T.);
++#9988=EDGE_CURVE('',#5112,#5107,#3351,.T.);
++#10000=EDGE_CURVE('',#5124,#5110,#3338,.T.);
++#10002=EDGE_CURVE('',#5110,#5112,#3355,.T.);
++#10015=EDGE_CURVE('',#5108,#5110,#3360,.T.);
++#10038=EDGE_CURVE('',#5140,#5136,#3397,.T.);
++#10040=EDGE_CURVE('',#5118,#5140,#3365,.T.);
++#10042=EDGE_CURVE('',#5116,#5118,#3370,.T.);
++#10044=EDGE_CURVE('',#5115,#5116,#3375,.T.);
++#10046=EDGE_CURVE('',#5136,#5115,#3379,.T.);
++#10056=EDGE_CURVE('',#5135,#5136,#3383,.T.);
++#10059=EDGE_CURVE('',#5139,#5140,#3392,.T.);
++#10072=EDGE_CURVE('',#5129,#5115,#3401,.T.);
++#10086=EDGE_CURVE('',#5130,#5116,#3405,.T.);
++#10099=EDGE_CURVE('',#5132,#5118,#3409,.T.);
++#10121=EDGE_CURVE('',#5183,#5184,#3413,.T.);
++#10124=EDGE_CURVE('',#5188,#5186,#3422,.T.);
++#10126=EDGE_CURVE('',#5188,#5183,#3427,.T.);
++#10137=EDGE_CURVE('',#5183,#5143,#3444,.T.);
++#10139=EDGE_CURVE('',#5147,#5143,#3486,.T.);
++#10150=EDGE_CURVE('',#5191,#5172,#3431,.T.);
++#10152=EDGE_CURVE('',#5196,#5191,#3478,.T.);
++#10154=EDGE_CURVE('',#5144,#5196,#3435,.T.);
++#10156=EDGE_CURVE('',#5143,#5144,#3440,.T.);
++#10160=EDGE_CURVE('',#5160,#5188,#3448,.T.);
++#10162=EDGE_CURVE('',#5164,#5160,#3558,.T.);
++#10164=EDGE_CURVE('',#5152,#5164,#3452,.T.);
++#10166=EDGE_CURVE('',#5156,#5152,#3540,.T.);
++#10168=EDGE_CURVE('',#5176,#5156,#3456,.T.);
++#10170=EDGE_CURVE('',#5180,#5176,#3522,.T.);
++#10172=EDGE_CURVE('',#5168,#5180,#3460,.T.);
++#10174=EDGE_CURVE('',#5172,#5168,#3504,.T.);
++#10184=EDGE_CURVE('',#5191,#5192,#3464,.T.);
++#10187=EDGE_CURVE('',#5171,#5172,#3499,.T.);
++#10200=EDGE_CURVE('',#5196,#5194,#3473,.T.);
++#10213=EDGE_CURVE('',#5148,#5144,#3482,.T.);
++#10236=EDGE_CURVE('',#5167,#5168,#3490,.T.);
++#10251=EDGE_CURVE('',#5179,#5180,#3517,.T.);
++#10262=EDGE_CURVE('',#5175,#5176,#3508,.T.);
++#10275=EDGE_CURVE('',#5155,#5156,#3535,.T.);
++#10288=EDGE_CURVE('',#5151,#5152,#3526,.T.);
++#10303=EDGE_CURVE('',#5163,#5164,#3553,.T.);
++#10314=EDGE_CURVE('',#5159,#5160,#3544,.T.);
++#10340=EDGE_CURVE('',#5207,#5199,#3562,.T.);
++#10342=EDGE_CURVE('',#5199,#5200,#3578,.T.);
++#10344=EDGE_CURVE('',#5208,#5200,#3574,.T.);
++#10355=EDGE_CURVE('',#5212,#5204,#3566,.T.);
++#10357=EDGE_CURVE('',#5204,#5199,#3583,.T.);
++#10369=EDGE_CURVE('',#5210,#5202,#3570,.T.);
++#10371=EDGE_CURVE('',#5202,#5204,#3587,.T.);
++#10384=EDGE_CURVE('',#5200,#5202,#3592,.T.);
++#10408=EDGE_CURVE('',#5223,#5215,#3596,.T.);
++#10410=EDGE_CURVE('',#5215,#5216,#3612,.T.);
++#10412=EDGE_CURVE('',#5224,#5216,#3608,.T.);
++#10423=EDGE_CURVE('',#5228,#5220,#3600,.T.);
++#10425=EDGE_CURVE('',#5220,#5215,#3617,.T.);
++#10437=EDGE_CURVE('',#5226,#5218,#3604,.T.);
++#10439=EDGE_CURVE('',#5218,#5220,#3621,.T.);
++#10452=EDGE_CURVE('',#5216,#5218,#3626,.T.);
++#10476=EDGE_CURVE('',#5239,#5231,#3630,.T.);
++#10478=EDGE_CURVE('',#5231,#5232,#3646,.T.);
++#10480=EDGE_CURVE('',#5240,#5232,#3642,.T.);
++#10491=EDGE_CURVE('',#5244,#5236,#3634,.T.);
++#10493=EDGE_CURVE('',#5236,#5231,#3651,.T.);
++#10505=EDGE_CURVE('',#5242,#5234,#3638,.T.);
++#10507=EDGE_CURVE('',#5234,#5236,#3655,.T.);
++#10520=EDGE_CURVE('',#5232,#5234,#3660,.T.);
++#10544=EDGE_CURVE('',#5255,#5247,#3664,.T.);
++#10546=EDGE_CURVE('',#5247,#5248,#3680,.T.);
++#10548=EDGE_CURVE('',#5256,#5248,#3676,.T.);
++#10559=EDGE_CURVE('',#5260,#5252,#3668,.T.);
++#10561=EDGE_CURVE('',#5252,#5247,#3685,.T.);
++#10573=EDGE_CURVE('',#5258,#5250,#3672,.T.);
++#10575=EDGE_CURVE('',#5250,#5252,#3689,.T.);
++#10588=EDGE_CURVE('',#5248,#5250,#3694,.T.);
++#10612=EDGE_CURVE('',#5278,#5264,#3702,.T.);
++#10614=EDGE_CURVE('',#5263,#5264,#3714,.T.);
++#10616=EDGE_CURVE('',#5277,#5263,#3698,.T.);
++#10627=EDGE_CURVE('',#5280,#5266,#3706,.T.);
++#10629=EDGE_CURVE('',#5264,#5266,#3719,.T.);
++#10641=EDGE_CURVE('',#5282,#5268,#3710,.T.);
++#10643=EDGE_CURVE('',#5266,#5268,#3723,.T.);
++#10656=EDGE_CURVE('',#5268,#5263,#3728,.T.);
++#10679=EDGE_CURVE('',#5480,#5476,#3765,.T.);
++#10681=EDGE_CURVE('',#5480,#5271,#3732,.T.);
++#10683=EDGE_CURVE('',#5271,#5272,#3737,.T.);
++#10685=EDGE_CURVE('',#5272,#5274,#3742,.T.);
++#10687=EDGE_CURVE('',#5274,#5476,#3747,.T.);
++#10697=EDGE_CURVE('',#5475,#5476,#3751,.T.);
++#10700=EDGE_CURVE('',#5479,#5480,#3760,.T.);
++#10713=EDGE_CURVE('',#5288,#5274,#3769,.T.);
++#10727=EDGE_CURVE('',#5286,#5272,#3773,.T.);
++#10740=EDGE_CURVE('',#5285,#5271,#3777,.T.);
++#10763=EDGE_CURVE('',#5306,#5292,#3785,.T.);
++#10765=EDGE_CURVE('',#5291,#5292,#3797,.T.);
++#10767=EDGE_CURVE('',#5305,#5291,#3781,.T.);
++#10778=EDGE_CURVE('',#5308,#5294,#3789,.T.);
++#10780=EDGE_CURVE('',#5292,#5294,#3802,.T.);
++#10792=EDGE_CURVE('',#5310,#5296,#3793,.T.);
++#10794=EDGE_CURVE('',#5294,#5296,#3806,.T.);
++#10807=EDGE_CURVE('',#5296,#5291,#3811,.T.);
++#10830=EDGE_CURVE('',#5472,#5468,#3848,.T.);
++#10832=EDGE_CURVE('',#5472,#5299,#3815,.T.);
++#10834=EDGE_CURVE('',#5299,#5300,#3820,.T.);
++#10836=EDGE_CURVE('',#5300,#5302,#3825,.T.);
++#10838=EDGE_CURVE('',#5302,#5468,#3830,.T.);
++#10848=EDGE_CURVE('',#5467,#5468,#3834,.T.);
++#10851=EDGE_CURVE('',#5471,#5472,#3843,.T.);
++#10864=EDGE_CURVE('',#5316,#5302,#3852,.T.);
++#10878=EDGE_CURVE('',#5314,#5300,#3856,.T.);
++#10891=EDGE_CURVE('',#5313,#5299,#3860,.T.);
++#10914=EDGE_CURVE('',#5336,#5328,#3868,.T.);
++#10916=EDGE_CURVE('',#5327,#5328,#3880,.T.);
++#10918=EDGE_CURVE('',#5335,#5327,#3864,.T.);
++#10929=EDGE_CURVE('',#5338,#5330,#3872,.T.);
++#10931=EDGE_CURVE('',#5328,#5330,#3885,.T.);
++#10943=EDGE_CURVE('',#5340,#5332,#3876,.T.);
++#10945=EDGE_CURVE('',#5330,#5332,#3889,.T.);
++#10958=EDGE_CURVE('',#5332,#5327,#3894,.T.);
++#10982=EDGE_CURVE('',#5352,#5344,#3902,.T.);
++#10984=EDGE_CURVE('',#5343,#5344,#3914,.T.);
++#10986=EDGE_CURVE('',#5351,#5343,#3898,.T.);
++#10997=EDGE_CURVE('',#5354,#5346,#3906,.T.);
++#10999=EDGE_CURVE('',#5344,#5346,#3919,.T.);
++#11011=EDGE_CURVE('',#5356,#5348,#3910,.T.);
++#11013=EDGE_CURVE('',#5346,#5348,#3923,.T.);
++#11026=EDGE_CURVE('',#5348,#5343,#3928,.T.);
++#11050=EDGE_CURVE('',#5368,#5360,#3936,.T.);
++#11052=EDGE_CURVE('',#5359,#5360,#3948,.T.);
++#11054=EDGE_CURVE('',#5367,#5359,#3932,.T.);
++#11065=EDGE_CURVE('',#5370,#5362,#3940,.T.);
++#11067=EDGE_CURVE('',#5360,#5362,#3953,.T.);
++#11079=EDGE_CURVE('',#5372,#5364,#3944,.T.);
++#11081=EDGE_CURVE('',#5362,#5364,#3957,.T.);
++#11094=EDGE_CURVE('',#5364,#5359,#3962,.T.);
++#11118=EDGE_CURVE('',#5384,#5376,#3970,.T.);
++#11120=EDGE_CURVE('',#5375,#5376,#3982,.T.);
++#11122=EDGE_CURVE('',#5383,#5375,#3966,.T.);
++#11133=EDGE_CURVE('',#5386,#5378,#3974,.T.);
++#11135=EDGE_CURVE('',#5376,#5378,#3987,.T.);
++#11147=EDGE_CURVE('',#5388,#5380,#3978,.T.);
++#11149=EDGE_CURVE('',#5378,#5380,#3991,.T.);
++#11162=EDGE_CURVE('',#5380,#5375,#3996,.T.);
++#11186=EDGE_CURVE('',#5405,#5391,#4000,.T.);
++#11188=EDGE_CURVE('',#5391,#5392,#4016,.T.);
++#11190=EDGE_CURVE('',#5406,#5392,#4012,.T.);
++#11201=EDGE_CURVE('',#5410,#5396,#4004,.T.);
++#11203=EDGE_CURVE('',#5396,#5391,#4021,.T.);
++#11215=EDGE_CURVE('',#5408,#5394,#4008,.T.);
++#11217=EDGE_CURVE('',#5394,#5396,#4025,.T.);
++#11230=EDGE_CURVE('',#5392,#5394,#4030,.T.);
++#11253=EDGE_CURVE('',#5488,#5484,#4067,.T.);
++#11255=EDGE_CURVE('',#5402,#5488,#4035,.T.);
++#11257=EDGE_CURVE('',#5400,#5402,#4040,.T.);
++#11259=EDGE_CURVE('',#5399,#5400,#4045,.T.);
++#11261=EDGE_CURVE('',#5484,#5399,#4049,.T.);
++#11271=EDGE_CURVE('',#5483,#5484,#4053,.T.);
++#11274=EDGE_CURVE('',#5487,#5488,#4062,.T.);
++#11287=EDGE_CURVE('',#5413,#5399,#4071,.T.);
++#11301=EDGE_CURVE('',#5414,#5400,#4075,.T.);
++#11314=EDGE_CURVE('',#5416,#5402,#4079,.T.);
++#11336=EDGE_CURVE('',#5451,#5452,#4083,.T.);
++#11338=EDGE_CURVE('',#5452,#5456,#4088,.T.);
++#11340=EDGE_CURVE('',#5455,#5456,#4092,.T.);
++#11353=EDGE_CURVE('',#5422,#5424,#4110,.T.);
++#11355=EDGE_CURVE('',#5452,#5422,#4216,.T.);
++#11365=EDGE_CURVE('',#5419,#5420,#4101,.T.);
++#11367=EDGE_CURVE('',#5419,#5422,#4106,.T.);
++#11381=EDGE_CURVE('',#5430,#5432,#4128,.T.);
++#11383=EDGE_CURVE('',#5419,#5430,#4220,.T.);
++#11393=EDGE_CURVE('',#5427,#5428,#4119,.T.);
++#11395=EDGE_CURVE('',#5427,#5430,#4124,.T.);
++#11409=EDGE_CURVE('',#5446,#5448,#4146,.T.);
++#11411=EDGE_CURVE('',#5427,#5446,#4224,.T.);
++#11421=EDGE_CURVE('',#5443,#5444,#4137,.T.);
++#11423=EDGE_CURVE('',#5443,#5446,#4142,.T.);
++#11435=EDGE_CURVE('',#5438,#5440,#4164,.T.);
++#11437=EDGE_CURVE('',#5443,#5438,#4228,.T.);
++#11449=EDGE_CURVE('',#5435,#5436,#4155,.T.);
++#11451=EDGE_CURVE('',#5435,#5438,#4160,.T.);
++#11463=EDGE_CURVE('',#5463,#5464,#4182,.T.);
++#11465=EDGE_CURVE('',#5435,#5464,#4199,.T.);
++#11477=EDGE_CURVE('',#5459,#5460,#4173,.T.);
++#11479=EDGE_CURVE('',#5460,#5464,#4178,.T.);
++#11493=EDGE_CURVE('',#5323,#5319,#4191,.T.);
++#11495=EDGE_CURVE('',#5460,#5319,#4203,.T.);
++#11506=EDGE_CURVE('',#5324,#5320,#4195,.T.);
++#11508=EDGE_CURVE('',#5319,#5320,#4208,.T.);
++#11520=EDGE_CURVE('',#5320,#5456,#4212,.T.);
++#11562=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11550),#11561);
++#11569=PRODUCT_DEFINITION('design','',#11568,#11565);
++#11570=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PROESOURCE.',#11569);
++#11571=SHAPE_DEFINITION_REPRESENTATION(#11570,#11562);
++ENDSEC;
++END-ISO-10303-21;
+diff -Naur netgen-5.3.1_SRC_orig/windows/netgen.rc netgen-5.3.1_SRC_modif/windows/netgen.rc
+--- netgen-5.3.1_SRC_orig/windows/netgen.rc 2014-10-06 14:59:42.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/netgen.rc 2019-11-14 16:56:26.870327358 +0300
+@@ -1,105 +1,105 @@
+-// Microsoft Visual C++ generated resource script.\r
+-//\r
+-#include "resource.h"\r
+-\r
+-#define APSTUDIO_READONLY_SYMBOLS\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-//\r
+-// Generated from the TEXTINCLUDE 2 resource.\r
+-//\r
+-#include "afxres.h"\r\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-#undef APSTUDIO_READONLY_SYMBOLS\r
+-\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-// German (Germany) resources\r
+-\r
+-#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_DEU)\r
+-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN\r
+-#pragma code_page(1252)\r
+-\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-//\r
+-// Icon\r
+-//\r
+-\r
+-// Icon with lowest ID value placed first to ensure application icon\r
+-// remains consistent on all systems.\r
+-100 ICON "netgen.ico"\r
+-\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-//\r
+-// Version\r
+-//\r
+-\r
+-VS_VERSION_INFO VERSIONINFO\r
+- FILEVERSION 5,3,0,0\r
+- PRODUCTVERSION 5,3,0,0\r
+- FILEFLAGSMASK 0x3fL\r
+-#ifdef _DEBUG\r
+- FILEFLAGS 0x3L\r
+-#else\r
+- FILEFLAGS 0x2L\r
+-#endif\r
+- FILEOS 0x4L\r
+- FILETYPE 0x1L\r
+- FILESUBTYPE 0x0L\r
+-BEGIN\r
+- BLOCK "StringFileInfo"\r
+- BEGIN\r
+- BLOCK "040904b0"\r
+- BEGIN\r
+- VALUE "CompanyName", "Vienna UT"\r
+- VALUE "FileDescription", "Netgen Meshing Software"\r
+- VALUE "FileVersion", "5.3"\r
+- VALUE "InternalName", "Netgen"\r
+- VALUE "LegalCopyright", "GNU Public License (GPL)"\r
+- VALUE "OriginalFilename", "Netgen.exe"\r
+- VALUE "ProductName", "Netgen"\r
+- VALUE "ProductVersion", "5.3"\r
+- END\r
+- END\r
+- BLOCK "VarFileInfo"\r
+- BEGIN\r
+- VALUE "Translation", 0x409, 1200\r
+- END\r
+-END\r
+-\r
+-\r
+-#ifdef APSTUDIO_INVOKED\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-//\r
+-// TEXTINCLUDE\r
+-//\r
+-\r
+-1 TEXTINCLUDE \r
+-BEGIN\r
+- "resource.\0"\r
+-END\r
+-\r
+-3 TEXTINCLUDE \r
+-BEGIN\r
+- "\r\0"\r
+-END\r
+-\r
+-2 TEXTINCLUDE \r
+-BEGIN\r
+- "#include ""afxres.h""\r\0"\r
+-END\r
+-\r
+-#endif // APSTUDIO_INVOKED\r
+-\r
+-#endif // German (Germany) resources\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-\r
+-\r
+-\r
+-#ifndef APSTUDIO_INVOKED\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-//\r
+-// Generated from the TEXTINCLUDE 3 resource.\r
+-//\r
+-\r\r
+-/////////////////////////////////////////////////////////////////////////////\r
+-#endif // not APSTUDIO_INVOKED\r
+-\r
++// Microsoft Visual C++ generated resource script.
++//
++#include "resource.h"
++
++#define APSTUDIO_READONLY_SYMBOLS
++/////////////////////////////////////////////////////////////////////////////
++//
++// Generated from the TEXTINCLUDE 2 resource.
++//
++#include "afxres.h"\r
++/////////////////////////////////////////////////////////////////////////////
++#undef APSTUDIO_READONLY_SYMBOLS
++
++/////////////////////////////////////////////////////////////////////////////
++// German (Germany) resources
++
++#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_DEU)
++LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
++#pragma code_page(1252)
++
++/////////////////////////////////////////////////////////////////////////////
++//
++// Icon
++//
++
++// Icon with lowest ID value placed first to ensure application icon
++// remains consistent on all systems.
++100 ICON "netgen.ico"
++
++/////////////////////////////////////////////////////////////////////////////
++//
++// Version
++//
++
++VS_VERSION_INFO VERSIONINFO
++ FILEVERSION 5,3,0,0
++ PRODUCTVERSION 5,3,0,0
++ FILEFLAGSMASK 0x3fL
++#ifdef _DEBUG
++ FILEFLAGS 0x3L
++#else
++ FILEFLAGS 0x2L
++#endif
++ FILEOS 0x4L
++ FILETYPE 0x1L
++ FILESUBTYPE 0x0L
++BEGIN
++ BLOCK "StringFileInfo"
++ BEGIN
++ BLOCK "040904b0"
++ BEGIN
++ VALUE "CompanyName", "Vienna UT"
++ VALUE "FileDescription", "Netgen Meshing Software"
++ VALUE "FileVersion", "5.3"
++ VALUE "InternalName", "Netgen"
++ VALUE "LegalCopyright", "GNU Public License (GPL)"
++ VALUE "OriginalFilename", "Netgen.exe"
++ VALUE "ProductName", "Netgen"
++ VALUE "ProductVersion", "5.3"
++ END
++ END
++ BLOCK "VarFileInfo"
++ BEGIN
++ VALUE "Translation", 0x409, 1200
++ END
++END
++
++
++#ifdef APSTUDIO_INVOKED
++/////////////////////////////////////////////////////////////////////////////
++//
++// TEXTINCLUDE
++//
++
++1 TEXTINCLUDE
++BEGIN
++ "resource.\0"
++END
++
++3 TEXTINCLUDE
++BEGIN
++ "\r\0"
++END
++
++2 TEXTINCLUDE
++BEGIN
++ "#include ""afxres.h""\r\0"
++END
++
++#endif // APSTUDIO_INVOKED
++
++#endif // German (Germany) resources
++/////////////////////////////////////////////////////////////////////////////
++
++
++
++#ifndef APSTUDIO_INVOKED
++/////////////////////////////////////////////////////////////////////////////
++//
++// Generated from the TEXTINCLUDE 3 resource.
++//
++\r
++/////////////////////////////////////////////////////////////////////////////
++#endif // not APSTUDIO_INVOKED
++
+diff -Naur netgen-5.3.1_SRC_orig/windows/netgen.sln netgen-5.3.1_SRC_modif/windows/netgen.sln
+--- netgen-5.3.1_SRC_orig/windows/netgen.sln 2014-08-29 13:53:59.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/netgen.sln 2019-11-14 16:56:26.930325678 +0300
+@@ -1,38 +1,38 @@
+-\r
+-Microsoft Visual Studio Solution File, Format Version 13.00\r
+-# Visual Studio 2013\r
+-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "netgen", "netgen.vcxproj", "{87468946-A594-4101-81A4-A131F35261EF}"\r
+-EndProject\r
+-Global\r
+- GlobalSection(SolutionConfigurationPlatforms) = preSolution\r
+- Debug(OCC)|Win32 = Debug(OCC)|Win32\r
+- Debug(OCC)|x64 = Debug(OCC)|x64\r
+- Debug|Win32 = Debug|Win32\r
+- Debug|x64 = Debug|x64\r
+- Release(OCC)|Win32 = Release(OCC)|Win32\r
+- Release(OCC)|x64 = Release(OCC)|x64\r
+- Release|Win32 = Release|Win32\r
+- Release|x64 = Release|x64\r
+- EndGlobalSection\r
+- GlobalSection(ProjectConfigurationPlatforms) = postSolution\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|Win32.ActiveCfg = Debug(OCC)|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|Win32.Build.0 = Debug(OCC)|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|x64.ActiveCfg = Debug(OCC)|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|x64.Build.0 = Debug(OCC)|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug|Win32.ActiveCfg = Debug|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug|Win32.Build.0 = Debug|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug|x64.ActiveCfg = Debug|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Debug|x64.Build.0 = Debug|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|Win32.ActiveCfg = Release(OCC)|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|Win32.Build.0 = Release(OCC)|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|x64.ActiveCfg = Release(OCC)|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|x64.Build.0 = Release(OCC)|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release|Win32.ActiveCfg = Release|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release|Win32.Build.0 = Release|Win32\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release|x64.ActiveCfg = Release|x64\r
+- {87468946-A594-4101-81A4-A131F35261EF}.Release|x64.Build.0 = Release|x64\r
+- EndGlobalSection\r
+- GlobalSection(SolutionProperties) = preSolution\r
+- HideSolutionNode = FALSE\r
+- EndGlobalSection\r
+-EndGlobal\r
++
++Microsoft Visual Studio Solution File, Format Version 13.00
++# Visual Studio 2013
++Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "netgen", "netgen.vcxproj", "{87468946-A594-4101-81A4-A131F35261EF}"
++EndProject
++Global
++ GlobalSection(SolutionConfigurationPlatforms) = preSolution
++ Debug(OCC)|Win32 = Debug(OCC)|Win32
++ Debug(OCC)|x64 = Debug(OCC)|x64
++ Debug|Win32 = Debug|Win32
++ Debug|x64 = Debug|x64
++ Release(OCC)|Win32 = Release(OCC)|Win32
++ Release(OCC)|x64 = Release(OCC)|x64
++ Release|Win32 = Release|Win32
++ Release|x64 = Release|x64
++ EndGlobalSection
++ GlobalSection(ProjectConfigurationPlatforms) = postSolution
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|Win32.ActiveCfg = Debug(OCC)|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|Win32.Build.0 = Debug(OCC)|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|x64.ActiveCfg = Debug(OCC)|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug(OCC)|x64.Build.0 = Debug(OCC)|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug|Win32.ActiveCfg = Debug|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug|Win32.Build.0 = Debug|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug|x64.ActiveCfg = Debug|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Debug|x64.Build.0 = Debug|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|Win32.ActiveCfg = Release(OCC)|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|Win32.Build.0 = Release(OCC)|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|x64.ActiveCfg = Release(OCC)|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Release(OCC)|x64.Build.0 = Release(OCC)|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Release|Win32.ActiveCfg = Release|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Release|Win32.Build.0 = Release|Win32
++ {87468946-A594-4101-81A4-A131F35261EF}.Release|x64.ActiveCfg = Release|x64
++ {87468946-A594-4101-81A4-A131F35261EF}.Release|x64.Build.0 = Release|x64
++ EndGlobalSection
++ GlobalSection(SolutionProperties) = preSolution
++ HideSolutionNode = FALSE
++ EndGlobalSection
++EndGlobal
+diff -Naur netgen-5.3.1_SRC_orig/windows/netgen.vcxproj netgen-5.3.1_SRC_modif/windows/netgen.vcxproj
+--- netgen-5.3.1_SRC_orig/windows/netgen.vcxproj 2014-10-06 14:59:42.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/netgen.vcxproj 2019-11-14 16:56:26.914326126 +0300
+@@ -1,863 +1,863 @@
+-<?xml version="1.0" encoding="utf-8"?>\r
+-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">\r
+- <ItemGroup Label="ProjectConfigurations">\r
+- <ProjectConfiguration Include="Debug(OCC)|Win32">\r
+- <Configuration>Debug(OCC)</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Debug(OCC)|x64">\r
+- <Configuration>Debug(OCC)</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Debug|Win32">\r
+- <Configuration>Debug</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Debug|x64">\r
+- <Configuration>Debug</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release(OCC)|Win32">\r
+- <Configuration>Release(OCC)</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release(OCC)|x64">\r
+- <Configuration>Release(OCC)</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release|Win32">\r
+- <Configuration>Release</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release|x64">\r
+- <Configuration>Release</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- </ItemGroup>\r
+- <PropertyGroup Label="Globals">\r
+- <ProjectGuid>{87468946-A594-4101-81A4-A131F35261EF}</ProjectGuid>\r
+- <RootNamespace>netgen</RootNamespace>\r
+- <Keyword>Win32Proj</Keyword>\r
+- </PropertyGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">\r
+- <ConfigurationType>Application</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- </PropertyGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />\r
+- <ImportGroup Label="ExtensionSettings">\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <PropertyGroup Label="UserMacros" />\r
+- <PropertyGroup>\r
+- <_ProjectFileVersion>11.0.60610.1</_ProjectFileVersion>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">\r
+- <OutDir>Debug\</OutDir>\r
+- <IntDir>Debug\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">\r
+- <OutDir>$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">\r
+- <OutDir>Release\</OutDir>\r
+- <IntDir>Release\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">\r
+- <OutDir>$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">\r
+- <OutDir>$(Configuration)\</OutDir>\r
+- <IntDir>$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">\r
+- <OutDir>$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'">\r
+- <OutDir>$(Configuration)\</OutDir>\r
+- <IntDir>$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'">\r
+- <OutDir>$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- <LinkIncremental />\r
+- <GenerateManifest>true</GenerateManifest>\r
+- </PropertyGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <IntrinsicFunctions>false</IntrinsicFunctions>\r
+- <WholeProgramOptimization>false</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthread-w32\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>EditAndContinue</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib;$(SolutionDir)..\..\ext_libs\pthread-w32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <LinkTimeCodeGeneration />\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX86</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <IntrinsicFunctions>false</IntrinsicFunctions>\r
+- <WholeProgramOptimization>false</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl-64\include;$(SolutionDir)..\..\ext_libs\pthread-w64\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2_64.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl-64\lib;$(SolutionDir)..\..\ext_libs\pthread-w64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <LinkTimeCodeGeneration />\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <StringPooling>true</StringPooling>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;zdll.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x86;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\win32;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>false</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <OptimizeReferences>true</OptimizeReferences>\r
+- <EnableCOMDATFolding>true</EnableCOMDATFolding>\r
+- <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX86</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(SolutionDir)..\..\ext_libs\zlib\include</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <StringPooling>true</StringPooling>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions2</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;tcl85.lib;tk85.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <OutputFile>$(OutDir)$(ProjectName).exe</OutputFile>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x64;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\x64;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>false</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <OptimizeReferences>false</OptimizeReferences>\r
+- <EnableCOMDATFolding>true</EnableCOMDATFolding>\r
+- <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- <StackReserveSize>4000000</StackReserveSize>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;WNT;NDEBUG;_CONSOLE;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <StringPooling>true</StringPooling>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;zdll.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x86;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\win32;$(CASROOT)\win32\vc8\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>false</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <OptimizeReferences>true</OptimizeReferences>\r
+- <EnableCOMDATFolding>true</EnableCOMDATFolding>\r
+- <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX86</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;WNT;NDEBUG;_CONSOLE;MSVC_EXPRESS;_OCC64;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <StringPooling>true</StringPooling>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;zlib1.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x64;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\lib;$(CASROOT)\win64\vc9\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>false</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <OptimizeReferences>true</OptimizeReferences>\r
+- <EnableCOMDATFolding>true</EnableCOMDATFolding>\r
+- <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>\r
+- <StackReserveSize>4000000</StackReserveSize>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <IntrinsicFunctions>false</IntrinsicFunctions>\r
+- <WholeProgramOptimization>false</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthread-w32\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;WNT;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>EditAndContinue</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib;$(SolutionDir)..\..\ext_libs\pthread-w32\lib;$(CASROOT)\win32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <LinkTimeCodeGeneration />\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX86</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <IntrinsicFunctions>false</IntrinsicFunctions>\r
+- <WholeProgramOptimization>false</WholeProgramOptimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl-64\include;$(SolutionDir)..\..\ext_libs\pthread-w64\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;WNT;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;_OCC64;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <ProjectReference>\r
+- <LinkLibraryDependencies>false</LinkLibraryDependencies>\r
+- </ProjectReference>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2_64.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <ShowProgress>NotSet</ShowProgress>\r
+- <Version />\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl-64\lib;$(SolutionDir)..\..\ext_libs\pthread-w64\lib;$(CASROOT)\win64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <EnableUAC>true</EnableUAC>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Console</SubSystem>\r
+- <LinkTimeCodeGeneration />\r
+- <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- <AllowIsolation>true</AllowIsolation>\r
+- </Link>\r
+- <PostBuildEvent>\r
+- <Message>Running POSTBUILD Script....</Message>\r
+- <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemGroup>\r
+- <ClInclude Include="..\libsrc\csg\algprim.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\brick.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csg.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csgparser.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\curve2d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\edgeflw.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\explicitcurve2d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\extrusion.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\gencyl.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\geoml.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\identify.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\manifold.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\meshsurf.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\polyhedra.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\revolution.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\singularref.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\solid.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\specpoin.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\spline3d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\surface.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\triapprox.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\vscsg.hpp" />\r
+- <ClInclude Include="..\libsrc\general\archive_base.hpp" />\r
+- <ClInclude Include="..\libsrc\general\array.hpp" />\r
+- <ClInclude Include="..\libsrc\general\autodiff.hpp" />\r
+- <ClInclude Include="..\libsrc\general\autoptr.hpp" />\r
+- <ClInclude Include="..\libsrc\general\bitarray.hpp" />\r
+- <ClInclude Include="..\libsrc\general\dynamicmem.hpp" />\r
+- <ClInclude Include="..\libsrc\general\flags.hpp" />\r
+- <ClInclude Include="..\libsrc\general\gzstream.h" />\r
+- <ClInclude Include="..\libsrc\general\hashtabl.hpp" />\r
+- <ClInclude Include="..\libsrc\general\mpi_interface.hpp" />\r
+- <ClInclude Include="..\libsrc\general\myadt.hpp" />\r
+- <ClInclude Include="..\libsrc\general\mystring.hpp" />\r
+- <ClInclude Include="..\libsrc\general\netgenout.hpp" />\r
+- <ClInclude Include="..\libsrc\general\ngexception.hpp" />\r
+- <ClInclude Include="..\libsrc\general\optmem.hpp" />\r
+- <ClInclude Include="..\libsrc\general\parthreads.hpp" />\r
+- <ClInclude Include="..\libsrc\general\profiler.hpp" />\r
+- <ClInclude Include="..\libsrc\general\seti.hpp" />\r
+- <ClInclude Include="..\libsrc\general\sort.hpp" />\r
+- <ClInclude Include="..\libsrc\general\spbita2d.hpp" />\r
+- <ClInclude Include="..\libsrc\general\stack.hpp" />\r
+- <ClInclude Include="..\libsrc\general\symbolta.hpp" />\r
+- <ClInclude Include="..\libsrc\general\table.hpp" />\r
+- <ClInclude Include="..\libsrc\general\template.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\geom2dmesh.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\geometry2d.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\spline2d.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\splinegeometry2.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\vsgeom2d.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\adtree.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geom2d.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geom3d.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomfuncs.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomobjects.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomobjects2.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomops.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomops2.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomtest3d.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\gprim.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\spline.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\splinegeometry.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\transform3d.hpp" />\r
+- <ClInclude Include="..\libsrc\include\acisgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\include\csg.hpp" />\r
+- <ClInclude Include="..\libsrc\include\geometry2d.hpp" />\r
+- <ClInclude Include="..\libsrc\include\gprim.hpp" />\r
+- <ClInclude Include="..\libsrc\include\incvis.hpp" />\r
+- <ClInclude Include="..\libsrc\include\linalg.hpp" />\r
+- <ClInclude Include="..\libsrc\include\meshing.hpp" />\r
+- <ClInclude Include="..\libsrc\include\myadt.hpp" />\r
+- <ClInclude Include="..\libsrc\include\mydefs.hpp" />\r
+- <ClInclude Include="..\libsrc\include\mystdlib.h" />\r
+- <ClInclude Include="..\libsrc\include\nginterface.h" />\r
+- <ClInclude Include="..\libsrc\include\nginterface_v2.hpp" />\r
+- <ClInclude Include="..\libsrc\include\nginterface_v2_impl.hpp" />\r
+- <ClInclude Include="..\libsrc\include\occgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\include\opti.hpp" />\r
+- <ClInclude Include="..\libsrc\include\parallel.hpp" />\r
+- <ClInclude Include="..\libsrc\include\parallelinterface.hpp" />\r
+- <ClInclude Include="..\libsrc\include\stlgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\include\visual.hpp" />\r
+- <ClInclude Include="..\libsrc\interface\writeuser.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\densemat.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\linalg.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\opti.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\polynomial.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\vector.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\adfront2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\adfront3.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\basegeom.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\bcfunctions.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\bisect.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\boundarylayer.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\classifyhpel.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\clusters.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\curvedelems.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\findip.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\findip2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\geomsearch.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\global.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hprefinement.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_hex.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_prism.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_pyramid.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_quad.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_segm.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_tet.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_trig.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\improve2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\improve3.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\localh.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshclass.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshfunc.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing3.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshtool.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshtype.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\msghandler.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\paralleltop.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\ruler2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\ruler3.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\specials.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\topology.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\validate.hpp" />\r
+- <ClInclude Include="..\libsrc\occ\occgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\occ\occmeshsurf.hpp" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Inter2d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Inter3d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop2d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop3d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Spliter.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\utilities.h" />\r
+- <ClInclude Include="..\libsrc\occ\vsocc.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\meshstlsurface.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stlgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stlline.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stltool.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stltopology.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\vsstl.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\meshdoc.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\mvdraw.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\soldata.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\vispar.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\visual.hpp" />\r
+- <ClInclude Include="..\libsrc\visualization\vssolution.hpp" />\r
+- <ClInclude Include="..\ng\demoview.hpp" />\r
+- <ClInclude Include="..\ng\ng_acis.hpp" />\r
+- <ClInclude Include="..\ng\parallelfunc.hpp" />\r
+- <ClInclude Include="..\ng\togl_1_7.h" />\r
+- </ItemGroup>\r
+- <ItemGroup>\r
+- <ClCompile Include="..\libsrc\csg\algprim.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\brick.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\bspline2d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\csgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\csgparser.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\csgpkg.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\curve2d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\edgeflw.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\explicitcurve2d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\extrusion.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\gencyl.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\genmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\identify.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\manifold.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\meshsurf.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\polyhedra.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\revolution.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\singularref.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\solid.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\specpoin.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\spline3d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\surface.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\triapprox.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\vscsg.cpp" />\r
+- <ClCompile Include="..\libsrc\general\array.cpp" />\r
+- <ClCompile Include="..\libsrc\general\bitarray.cpp" />\r
+- <ClCompile Include="..\libsrc\general\dynamicmem.cpp" />\r
+- <ClCompile Include="..\libsrc\general\flags.cpp" />\r
+- <ClCompile Include="..\libsrc\general\gzstream.cpp" />\r
+- <ClCompile Include="..\libsrc\general\hashtabl.cpp" />\r
+- <ClCompile Include="..\libsrc\general\mpi_interface.cpp" />\r
+- <ClCompile Include="..\libsrc\general\mystring.cpp" />\r
+- <ClCompile Include="..\libsrc\general\ngexception.cpp" />\r
+- <ClCompile Include="..\libsrc\general\optmem.cpp" />\r
+- <ClCompile Include="..\libsrc\general\parthreads.cpp" />\r
+- <ClCompile Include="..\libsrc\general\profiler.cpp" />\r
+- <ClCompile Include="..\libsrc\general\seti.cpp" />\r
+- <ClCompile Include="..\libsrc\general\sort.cpp" />\r
+- <ClCompile Include="..\libsrc\general\spbita2d.cpp" />\r
+- <ClCompile Include="..\libsrc\general\symbolta.cpp" />\r
+- <ClCompile Include="..\libsrc\general\table.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\genmesh2d.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\geom2dmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\geom2dpkg.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\geometry2d.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\vsgeom2d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\adtree.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geom2d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geom3d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geomfuncs.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geomtest3d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\spline.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\splinegeometry.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\transform3d.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\nginterface.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\nginterface_v2.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\readtetmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\readuser.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\read_fnf_mesh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeabaqus.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writediffpack.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writedolfin.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeelmer.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writefeap.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writefluent.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writegmsh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writegmsh2.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writejcm.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeOpenFOAM15x.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writepermas.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetecplot.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetet.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetochnog.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeuser.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\wuchemnitz.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\bfgs.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\densemat.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\linopt.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\linsearch.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\polynomial.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\adfront2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\adfront3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\basegeom.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\bcfunctions.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\bisect.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\boundarylayer.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\clusters.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\curvedelems.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\delaunay.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\delaunay2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\geomsearch.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\global.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\hprefinement.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve2gen.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\localh.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshclass.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshfunc.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshfunc2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshing2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshing3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshtool.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshtype.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\msghandler.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\netrule2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\netrule3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parallelmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\paralleltop.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parser2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parser3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\prism2rls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\pyramid2rls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\pyramidrls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\quadrls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\refine.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\ruler2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\ruler3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\secondorder.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing2.5.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\specials.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\tetrarls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\topology.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\triarls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\validate.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\zrefine.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occconstruction.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occgenmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occmeshsurf.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occpkg.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Inter2d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Inter3d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop2d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop3d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Spliter.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\vsocc.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\meshstlsurface.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeomchart.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeommesh.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlline.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlpkg.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stltool.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stltopology.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\vsstl.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\importsolution.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\meshdoc.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\mvdraw.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\vsfieldlines.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\vsmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\visualization\vssolution.cpp" />\r
+- <ClCompile Include="..\ng\demoview.cpp" />\r
+- <ClCompile Include="..\ng\ngappinit.cpp" />\r
+- <ClCompile Include="..\ng\ngpkg.cpp" />\r
+- <ClCompile Include="..\ng\onetcl.cpp" />\r
+- <ClCompile Include="..\ng\parallelfunc.cpp" />\r
+- </ItemGroup>\r
+- <ItemGroup>\r
+- <None Include="..\libsrc\occ\Partition_Inter2d.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Inter2d.jxx" />\r
+- <None Include="..\libsrc\occ\Partition_Inter3d.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Inter3d.jxx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop.jxx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop2d.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop2d.jxx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop3d.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Loop3d.jxx" />\r
+- <None Include="..\libsrc\occ\Partition_Spliter.ixx" />\r
+- <None Include="..\libsrc\occ\Partition_Spliter.jxx" />\r
+- <None Include="resource." />\r
+- </ItemGroup>\r
+- <ItemGroup>\r
+- <Image Include="netgen.ico" />\r
+- </ItemGroup>\r
+- <ItemGroup>\r
+- <ResourceCompile Include="netgen.rc" />\r
+- </ItemGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />\r
+- <ImportGroup Label="ExtensionTargets">\r
+- </ImportGroup>\r
+- <ProjectExtensions>\r
+- <VisualStudio>\r
+- <UserProperties HPC_Debug="<?xml version="1.0" encoding="utf-8"?><Properties xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><ProjectNameDisplay>netgen</ProjectNameDisplay><CollapseAdvanced>true</CollapseAdvanced><ApplicationPlatform>x86</ApplicationPlatform></Properties>" />\r
+- </VisualStudio>\r
+- </ProjectExtensions>\r
++<?xml version="1.0" encoding="utf-8"?>
++<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
++ <ItemGroup Label="ProjectConfigurations">
++ <ProjectConfiguration Include="Debug(OCC)|Win32">
++ <Configuration>Debug(OCC)</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Debug(OCC)|x64">
++ <Configuration>Debug(OCC)</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Debug|Win32">
++ <Configuration>Debug</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Debug|x64">
++ <Configuration>Debug</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release(OCC)|Win32">
++ <Configuration>Release(OCC)</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release(OCC)|x64">
++ <Configuration>Release(OCC)</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release|Win32">
++ <Configuration>Release</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release|x64">
++ <Configuration>Release</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ </ItemGroup>
++ <PropertyGroup Label="Globals">
++ <ProjectGuid>{87468946-A594-4101-81A4-A131F35261EF}</ProjectGuid>
++ <RootNamespace>netgen</RootNamespace>
++ <Keyword>Win32Proj</Keyword>
++ </PropertyGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
++ <ConfigurationType>Application</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ </PropertyGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
++ <ImportGroup Label="ExtensionSettings">
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <PropertyGroup Label="UserMacros" />
++ <PropertyGroup>
++ <_ProjectFileVersion>11.0.60610.1</_ProjectFileVersion>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
++ <OutDir>Debug\</OutDir>
++ <IntDir>Debug\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
++ <OutDir>$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
++ <OutDir>Release\</OutDir>
++ <IntDir>Release\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
++ <OutDir>$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">
++ <OutDir>$(Configuration)\</OutDir>
++ <IntDir>$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">
++ <OutDir>$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'">
++ <OutDir>$(Configuration)\</OutDir>
++ <IntDir>$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'">
++ <OutDir>$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b*.exp%3b*.lib%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ <LinkIncremental />
++ <GenerateManifest>true</GenerateManifest>
++ </PropertyGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <IntrinsicFunctions>false</IntrinsicFunctions>
++ <WholeProgramOptimization>false</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthread-w32\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib;$(SolutionDir)..\..\ext_libs\pthread-w32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <LinkTimeCodeGeneration />
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX86</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <IntrinsicFunctions>false</IntrinsicFunctions>
++ <WholeProgramOptimization>false</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl-64\include;$(SolutionDir)..\..\ext_libs\pthread-w64\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2_64.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl-64\lib;$(SolutionDir)..\..\ext_libs\pthread-w64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <LinkTimeCodeGeneration />
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX64</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <StringPooling>true</StringPooling>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;zdll.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x86;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\win32;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>false</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <OptimizeReferences>true</OptimizeReferences>
++ <EnableCOMDATFolding>true</EnableCOMDATFolding>
++ <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX86</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(SolutionDir)..\..\ext_libs\zlib\include</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;MSVC_EXPRESS;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <StringPooling>true</StringPooling>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions2</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;tcl85.lib;tk85.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <OutputFile>$(OutDir)$(ProjectName).exe</OutputFile>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x64;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\x64;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>false</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <OptimizeReferences>false</OptimizeReferences>
++ <EnableCOMDATFolding>true</EnableCOMDATFolding>
++ <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX64</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ <StackReserveSize>4000000</StackReserveSize>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;WNT;NDEBUG;_CONSOLE;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <StringPooling>true</StringPooling>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;zdll.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x86;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\win32;$(CASROOT)\win32\vc8\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>false</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <OptimizeReferences>true</OptimizeReferences>
++ <EnableCOMDATFolding>true</EnableCOMDATFolding>
++ <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX86</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthreads-win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\FFMPEG\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;WNT;NDEBUG;_CONSOLE;MSVC_EXPRESS;_OCC64;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;FFMPEG;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <StringPooling>true</StringPooling>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;zlib1.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;avcodec.lib;avdevice.lib;avfilter.lib;avformat.lib;avutil.lib;postproc.lib;swresample.lib;swscale.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib\x64;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\FFMPEG\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\lib;$(CASROOT)\win64\vc9\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>false</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <OptimizeReferences>true</OptimizeReferences>
++ <EnableCOMDATFolding>true</EnableCOMDATFolding>
++ <LinkTimeCodeGeneration>UseLinkTimeCodeGeneration</LinkTimeCodeGeneration>
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX64</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ <ImageHasSafeExceptionHandlers>false</ImageHasSafeExceptionHandlers>
++ <StackReserveSize>4000000</StackReserveSize>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <IntrinsicFunctions>false</IntrinsicFunctions>
++ <WholeProgramOptimization>false</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl\include;$(SolutionDir)..\..\ext_libs\pthread-w32\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;WNT;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl\lib;$(SolutionDir)..\..\ext_libs\pthread-w32\lib;$(CASROOT)\win32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <LinkTimeCodeGeneration />
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX86</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug(OCC)|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <IntrinsicFunctions>false</IntrinsicFunctions>
++ <WholeProgramOptimization>false</WholeProgramOptimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..;$(SolutionDir)..\ng;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\libsrc\interface;$(SolutionDir)..\..\ext_libs\tcl-64\include;$(SolutionDir)..\..\ext_libs\pthread-w64\include;$(CASROOT)\inc;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;WNT;_DEBUG;_CONSOLE;DEBUG;MSVC_EXPRESS;_OCC64;Standard_EXPORT=;OCCGEOMETRY;OPENGL;_WIN32_WINNT=0x0502;NGINTERFACE_EXPORTS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <ProjectReference>
++ <LinkLibraryDependencies>false</LinkLibraryDependencies>
++ </ProjectReference>
++ <Link>
++ <AdditionalDependencies>pthreadVC2_64.lib;tcl85.lib;tk85.lib;tix84.lib;Togl17.lib;glu32.lib;opengl32.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <ShowProgress>NotSet</ShowProgress>
++ <Version />
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\tcl-64\lib;$(SolutionDir)..\..\ext_libs\pthread-w64\lib;$(CASROOT)\win64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <EnableUAC>true</EnableUAC>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Console</SubSystem>
++ <LinkTimeCodeGeneration />
++ <ImportLibrary>$(OutDir)nginterface.lib</ImportLibrary>
++ <TargetMachine>MachineX64</TargetMachine>
++ <AllowIsolation>true</AllowIsolation>
++ </Link>
++ <PostBuildEvent>
++ <Message>Running POSTBUILD Script....</Message>
++ <Command>"$(ProjectDir)\postBuild_netgen.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)" "nginterface"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemGroup>
++ <ClInclude Include="..\libsrc\csg\algprim.hpp" />
++ <ClInclude Include="..\libsrc\csg\brick.hpp" />
++ <ClInclude Include="..\libsrc\csg\csg.hpp" />
++ <ClInclude Include="..\libsrc\csg\csgeom.hpp" />
++ <ClInclude Include="..\libsrc\csg\csgparser.hpp" />
++ <ClInclude Include="..\libsrc\csg\curve2d.hpp" />
++ <ClInclude Include="..\libsrc\csg\edgeflw.hpp" />
++ <ClInclude Include="..\libsrc\csg\explicitcurve2d.hpp" />
++ <ClInclude Include="..\libsrc\csg\extrusion.hpp" />
++ <ClInclude Include="..\libsrc\csg\gencyl.hpp" />
++ <ClInclude Include="..\libsrc\csg\geoml.hpp" />
++ <ClInclude Include="..\libsrc\csg\identify.hpp" />
++ <ClInclude Include="..\libsrc\csg\manifold.hpp" />
++ <ClInclude Include="..\libsrc\csg\meshsurf.hpp" />
++ <ClInclude Include="..\libsrc\csg\polyhedra.hpp" />
++ <ClInclude Include="..\libsrc\csg\revolution.hpp" />
++ <ClInclude Include="..\libsrc\csg\singularref.hpp" />
++ <ClInclude Include="..\libsrc\csg\solid.hpp" />
++ <ClInclude Include="..\libsrc\csg\specpoin.hpp" />
++ <ClInclude Include="..\libsrc\csg\spline3d.hpp" />
++ <ClInclude Include="..\libsrc\csg\surface.hpp" />
++ <ClInclude Include="..\libsrc\csg\triapprox.hpp" />
++ <ClInclude Include="..\libsrc\csg\vscsg.hpp" />
++ <ClInclude Include="..\libsrc\general\archive_base.hpp" />
++ <ClInclude Include="..\libsrc\general\array.hpp" />
++ <ClInclude Include="..\libsrc\general\autodiff.hpp" />
++ <ClInclude Include="..\libsrc\general\autoptr.hpp" />
++ <ClInclude Include="..\libsrc\general\bitarray.hpp" />
++ <ClInclude Include="..\libsrc\general\dynamicmem.hpp" />
++ <ClInclude Include="..\libsrc\general\flags.hpp" />
++ <ClInclude Include="..\libsrc\general\gzstream.h" />
++ <ClInclude Include="..\libsrc\general\hashtabl.hpp" />
++ <ClInclude Include="..\libsrc\general\mpi_interface.hpp" />
++ <ClInclude Include="..\libsrc\general\myadt.hpp" />
++ <ClInclude Include="..\libsrc\general\mystring.hpp" />
++ <ClInclude Include="..\libsrc\general\netgenout.hpp" />
++ <ClInclude Include="..\libsrc\general\ngexception.hpp" />
++ <ClInclude Include="..\libsrc\general\optmem.hpp" />
++ <ClInclude Include="..\libsrc\general\parthreads.hpp" />
++ <ClInclude Include="..\libsrc\general\profiler.hpp" />
++ <ClInclude Include="..\libsrc\general\seti.hpp" />
++ <ClInclude Include="..\libsrc\general\sort.hpp" />
++ <ClInclude Include="..\libsrc\general\spbita2d.hpp" />
++ <ClInclude Include="..\libsrc\general\stack.hpp" />
++ <ClInclude Include="..\libsrc\general\symbolta.hpp" />
++ <ClInclude Include="..\libsrc\general\table.hpp" />
++ <ClInclude Include="..\libsrc\general\template.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\geom2dmesh.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\geometry2d.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\spline2d.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\splinegeometry2.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\vsgeom2d.hpp" />
++ <ClInclude Include="..\libsrc\gprim\adtree.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geom2d.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geom3d.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomfuncs.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomobjects.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomobjects2.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomops.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomops2.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomtest3d.hpp" />
++ <ClInclude Include="..\libsrc\gprim\gprim.hpp" />
++ <ClInclude Include="..\libsrc\gprim\spline.hpp" />
++ <ClInclude Include="..\libsrc\gprim\splinegeometry.hpp" />
++ <ClInclude Include="..\libsrc\gprim\transform3d.hpp" />
++ <ClInclude Include="..\libsrc\include\acisgeom.hpp" />
++ <ClInclude Include="..\libsrc\include\csg.hpp" />
++ <ClInclude Include="..\libsrc\include\geometry2d.hpp" />
++ <ClInclude Include="..\libsrc\include\gprim.hpp" />
++ <ClInclude Include="..\libsrc\include\incvis.hpp" />
++ <ClInclude Include="..\libsrc\include\linalg.hpp" />
++ <ClInclude Include="..\libsrc\include\meshing.hpp" />
++ <ClInclude Include="..\libsrc\include\myadt.hpp" />
++ <ClInclude Include="..\libsrc\include\mydefs.hpp" />
++ <ClInclude Include="..\libsrc\include\mystdlib.h" />
++ <ClInclude Include="..\libsrc\include\nginterface.h" />
++ <ClInclude Include="..\libsrc\include\nginterface_v2.hpp" />
++ <ClInclude Include="..\libsrc\include\nginterface_v2_impl.hpp" />
++ <ClInclude Include="..\libsrc\include\occgeom.hpp" />
++ <ClInclude Include="..\libsrc\include\opti.hpp" />
++ <ClInclude Include="..\libsrc\include\parallel.hpp" />
++ <ClInclude Include="..\libsrc\include\parallelinterface.hpp" />
++ <ClInclude Include="..\libsrc\include\stlgeom.hpp" />
++ <ClInclude Include="..\libsrc\include\visual.hpp" />
++ <ClInclude Include="..\libsrc\interface\writeuser.hpp" />
++ <ClInclude Include="..\libsrc\linalg\densemat.hpp" />
++ <ClInclude Include="..\libsrc\linalg\linalg.hpp" />
++ <ClInclude Include="..\libsrc\linalg\opti.hpp" />
++ <ClInclude Include="..\libsrc\linalg\polynomial.hpp" />
++ <ClInclude Include="..\libsrc\linalg\vector.hpp" />
++ <ClInclude Include="..\libsrc\meshing\adfront2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\adfront3.hpp" />
++ <ClInclude Include="..\libsrc\meshing\basegeom.hpp" />
++ <ClInclude Include="..\libsrc\meshing\bcfunctions.hpp" />
++ <ClInclude Include="..\libsrc\meshing\bisect.hpp" />
++ <ClInclude Include="..\libsrc\meshing\boundarylayer.hpp" />
++ <ClInclude Include="..\libsrc\meshing\classifyhpel.hpp" />
++ <ClInclude Include="..\libsrc\meshing\clusters.hpp" />
++ <ClInclude Include="..\libsrc\meshing\curvedelems.hpp" />
++ <ClInclude Include="..\libsrc\meshing\findip.hpp" />
++ <ClInclude Include="..\libsrc\meshing\findip2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\geomsearch.hpp" />
++ <ClInclude Include="..\libsrc\meshing\global.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hprefinement.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_hex.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_prism.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_pyramid.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_quad.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_segm.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_tet.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_trig.hpp" />
++ <ClInclude Include="..\libsrc\meshing\improve2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\improve3.hpp" />
++ <ClInclude Include="..\libsrc\meshing\localh.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshclass.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshfunc.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing3.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshtool.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshtype.hpp" />
++ <ClInclude Include="..\libsrc\meshing\msghandler.hpp" />
++ <ClInclude Include="..\libsrc\meshing\paralleltop.hpp" />
++ <ClInclude Include="..\libsrc\meshing\ruler2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\ruler3.hpp" />
++ <ClInclude Include="..\libsrc\meshing\specials.hpp" />
++ <ClInclude Include="..\libsrc\meshing\topology.hpp" />
++ <ClInclude Include="..\libsrc\meshing\validate.hpp" />
++ <ClInclude Include="..\libsrc\occ\occgeom.hpp" />
++ <ClInclude Include="..\libsrc\occ\occmeshsurf.hpp" />
++ <ClInclude Include="..\libsrc\occ\Partition_Inter2d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Inter3d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop2d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop3d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Spliter.hxx" />
++ <ClInclude Include="..\libsrc\occ\utilities.h" />
++ <ClInclude Include="..\libsrc\occ\vsocc.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\meshstlsurface.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stlgeom.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stlline.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stltool.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stltopology.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\vsstl.hpp" />
++ <ClInclude Include="..\libsrc\visualization\meshdoc.hpp" />
++ <ClInclude Include="..\libsrc\visualization\mvdraw.hpp" />
++ <ClInclude Include="..\libsrc\visualization\soldata.hpp" />
++ <ClInclude Include="..\libsrc\visualization\vispar.hpp" />
++ <ClInclude Include="..\libsrc\visualization\visual.hpp" />
++ <ClInclude Include="..\libsrc\visualization\vssolution.hpp" />
++ <ClInclude Include="..\ng\demoview.hpp" />
++ <ClInclude Include="..\ng\ng_acis.hpp" />
++ <ClInclude Include="..\ng\parallelfunc.hpp" />
++ <ClInclude Include="..\ng\togl_1_7.h" />
++ </ItemGroup>
++ <ItemGroup>
++ <ClCompile Include="..\libsrc\csg\algprim.cpp" />
++ <ClCompile Include="..\libsrc\csg\brick.cpp" />
++ <ClCompile Include="..\libsrc\csg\bspline2d.cpp" />
++ <ClCompile Include="..\libsrc\csg\csgeom.cpp" />
++ <ClCompile Include="..\libsrc\csg\csgparser.cpp" />
++ <ClCompile Include="..\libsrc\csg\csgpkg.cpp" />
++ <ClCompile Include="..\libsrc\csg\curve2d.cpp" />
++ <ClCompile Include="..\libsrc\csg\edgeflw.cpp" />
++ <ClCompile Include="..\libsrc\csg\explicitcurve2d.cpp" />
++ <ClCompile Include="..\libsrc\csg\extrusion.cpp" />
++ <ClCompile Include="..\libsrc\csg\gencyl.cpp" />
++ <ClCompile Include="..\libsrc\csg\genmesh.cpp" />
++ <ClCompile Include="..\libsrc\csg\identify.cpp" />
++ <ClCompile Include="..\libsrc\csg\manifold.cpp" />
++ <ClCompile Include="..\libsrc\csg\meshsurf.cpp" />
++ <ClCompile Include="..\libsrc\csg\polyhedra.cpp" />
++ <ClCompile Include="..\libsrc\csg\revolution.cpp" />
++ <ClCompile Include="..\libsrc\csg\singularref.cpp" />
++ <ClCompile Include="..\libsrc\csg\solid.cpp" />
++ <ClCompile Include="..\libsrc\csg\specpoin.cpp" />
++ <ClCompile Include="..\libsrc\csg\spline3d.cpp" />
++ <ClCompile Include="..\libsrc\csg\surface.cpp" />
++ <ClCompile Include="..\libsrc\csg\triapprox.cpp" />
++ <ClCompile Include="..\libsrc\csg\vscsg.cpp" />
++ <ClCompile Include="..\libsrc\general\array.cpp" />
++ <ClCompile Include="..\libsrc\general\bitarray.cpp" />
++ <ClCompile Include="..\libsrc\general\dynamicmem.cpp" />
++ <ClCompile Include="..\libsrc\general\flags.cpp" />
++ <ClCompile Include="..\libsrc\general\gzstream.cpp" />
++ <ClCompile Include="..\libsrc\general\hashtabl.cpp" />
++ <ClCompile Include="..\libsrc\general\mpi_interface.cpp" />
++ <ClCompile Include="..\libsrc\general\mystring.cpp" />
++ <ClCompile Include="..\libsrc\general\ngexception.cpp" />
++ <ClCompile Include="..\libsrc\general\optmem.cpp" />
++ <ClCompile Include="..\libsrc\general\parthreads.cpp" />
++ <ClCompile Include="..\libsrc\general\profiler.cpp" />
++ <ClCompile Include="..\libsrc\general\seti.cpp" />
++ <ClCompile Include="..\libsrc\general\sort.cpp" />
++ <ClCompile Include="..\libsrc\general\spbita2d.cpp" />
++ <ClCompile Include="..\libsrc\general\symbolta.cpp" />
++ <ClCompile Include="..\libsrc\general\table.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\genmesh2d.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\geom2dmesh.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\geom2dpkg.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\geometry2d.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\vsgeom2d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\adtree.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geom2d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geom3d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geomfuncs.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geomtest3d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\spline.cpp" />
++ <ClCompile Include="..\libsrc\gprim\splinegeometry.cpp" />
++ <ClCompile Include="..\libsrc\gprim\transform3d.cpp" />
++ <ClCompile Include="..\libsrc\interface\nginterface.cpp" />
++ <ClCompile Include="..\libsrc\interface\nginterface_v2.cpp" />
++ <ClCompile Include="..\libsrc\interface\readtetmesh.cpp" />
++ <ClCompile Include="..\libsrc\interface\readuser.cpp" />
++ <ClCompile Include="..\libsrc\interface\read_fnf_mesh.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeabaqus.cpp" />
++ <ClCompile Include="..\libsrc\interface\writediffpack.cpp" />
++ <ClCompile Include="..\libsrc\interface\writedolfin.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeelmer.cpp" />
++ <ClCompile Include="..\libsrc\interface\writefeap.cpp" />
++ <ClCompile Include="..\libsrc\interface\writefluent.cpp" />
++ <ClCompile Include="..\libsrc\interface\writegmsh.cpp" />
++ <ClCompile Include="..\libsrc\interface\writegmsh2.cpp" />
++ <ClCompile Include="..\libsrc\interface\writejcm.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeOpenFOAM15x.cpp" />
++ <ClCompile Include="..\libsrc\interface\writepermas.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetecplot.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetet.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetochnog.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeuser.cpp" />
++ <ClCompile Include="..\libsrc\interface\wuchemnitz.cpp" />
++ <ClCompile Include="..\libsrc\linalg\bfgs.cpp" />
++ <ClCompile Include="..\libsrc\linalg\densemat.cpp" />
++ <ClCompile Include="..\libsrc\linalg\linopt.cpp" />
++ <ClCompile Include="..\libsrc\linalg\linsearch.cpp" />
++ <ClCompile Include="..\libsrc\linalg\polynomial.cpp" />
++ <ClCompile Include="..\libsrc\meshing\adfront2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\adfront3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\basegeom.cpp" />
++ <ClCompile Include="..\libsrc\meshing\bcfunctions.cpp" />
++ <ClCompile Include="..\libsrc\meshing\bisect.cpp" />
++ <ClCompile Include="..\libsrc\meshing\boundarylayer.cpp" />
++ <ClCompile Include="..\libsrc\meshing\clusters.cpp" />
++ <ClCompile Include="..\libsrc\meshing\curvedelems.cpp" />
++ <ClCompile Include="..\libsrc\meshing\delaunay.cpp" />
++ <ClCompile Include="..\libsrc\meshing\delaunay2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\geomsearch.cpp" />
++ <ClCompile Include="..\libsrc\meshing\global.cpp" />
++ <ClCompile Include="..\libsrc\meshing\hprefinement.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve2gen.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\localh.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshclass.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshfunc.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshfunc2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshing2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshing3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshtool.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshtype.cpp" />
++ <ClCompile Include="..\libsrc\meshing\msghandler.cpp" />
++ <ClCompile Include="..\libsrc\meshing\netrule2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\netrule3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parallelmesh.cpp" />
++ <ClCompile Include="..\libsrc\meshing\paralleltop.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parser2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parser3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\prism2rls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\pyramid2rls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\pyramidrls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\quadrls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\refine.cpp" />
++ <ClCompile Include="..\libsrc\meshing\ruler2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\ruler3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\secondorder.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing2.5.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\specials.cpp" />
++ <ClCompile Include="..\libsrc\meshing\tetrarls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\topology.cpp" />
++ <ClCompile Include="..\libsrc\meshing\triarls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\validate.cpp" />
++ <ClCompile Include="..\libsrc\meshing\zrefine.cpp" />
++ <ClCompile Include="..\libsrc\occ\occconstruction.cpp" />
++ <ClCompile Include="..\libsrc\occ\occgenmesh.cpp" />
++ <ClCompile Include="..\libsrc\occ\occgeom.cpp" />
++ <ClCompile Include="..\libsrc\occ\occmeshsurf.cpp" />
++ <ClCompile Include="..\libsrc\occ\occpkg.cpp" />
++ <ClCompile Include="..\libsrc\occ\Partition_Inter2d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Inter3d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop2d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop3d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Spliter.cxx" />
++ <ClCompile Include="..\libsrc\occ\vsocc.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\meshstlsurface.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeom.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeomchart.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeommesh.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlline.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlpkg.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stltool.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stltopology.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\vsstl.cpp" />
++ <ClCompile Include="..\libsrc\visualization\importsolution.cpp" />
++ <ClCompile Include="..\libsrc\visualization\meshdoc.cpp" />
++ <ClCompile Include="..\libsrc\visualization\mvdraw.cpp" />
++ <ClCompile Include="..\libsrc\visualization\vsfieldlines.cpp" />
++ <ClCompile Include="..\libsrc\visualization\vsmesh.cpp" />
++ <ClCompile Include="..\libsrc\visualization\vssolution.cpp" />
++ <ClCompile Include="..\ng\demoview.cpp" />
++ <ClCompile Include="..\ng\ngappinit.cpp" />
++ <ClCompile Include="..\ng\ngpkg.cpp" />
++ <ClCompile Include="..\ng\onetcl.cpp" />
++ <ClCompile Include="..\ng\parallelfunc.cpp" />
++ </ItemGroup>
++ <ItemGroup>
++ <None Include="..\libsrc\occ\Partition_Inter2d.ixx" />
++ <None Include="..\libsrc\occ\Partition_Inter2d.jxx" />
++ <None Include="..\libsrc\occ\Partition_Inter3d.ixx" />
++ <None Include="..\libsrc\occ\Partition_Inter3d.jxx" />
++ <None Include="..\libsrc\occ\Partition_Loop.ixx" />
++ <None Include="..\libsrc\occ\Partition_Loop.jxx" />
++ <None Include="..\libsrc\occ\Partition_Loop2d.ixx" />
++ <None Include="..\libsrc\occ\Partition_Loop2d.jxx" />
++ <None Include="..\libsrc\occ\Partition_Loop3d.ixx" />
++ <None Include="..\libsrc\occ\Partition_Loop3d.jxx" />
++ <None Include="..\libsrc\occ\Partition_Spliter.ixx" />
++ <None Include="..\libsrc\occ\Partition_Spliter.jxx" />
++ <None Include="resource." />
++ </ItemGroup>
++ <ItemGroup>
++ <Image Include="netgen.ico" />
++ </ItemGroup>
++ <ItemGroup>
++ <ResourceCompile Include="netgen.rc" />
++ </ItemGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
++ <ImportGroup Label="ExtensionTargets">
++ </ImportGroup>
++ <ProjectExtensions>
++ <VisualStudio>
++ <UserProperties HPC_Debug="<?xml version="1.0" encoding="utf-8"?><Properties xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><ProjectNameDisplay>netgen</ProjectNameDisplay><CollapseAdvanced>true</CollapseAdvanced><ApplicationPlatform>x86</ApplicationPlatform></Properties>" />
++ </VisualStudio>
++ </ProjectExtensions>
+ </Project>
+\ No newline at end of file
+diff -Naur netgen-5.3.1_SRC_orig/windows/nglib.sln netgen-5.3.1_SRC_modif/windows/nglib.sln
+--- netgen-5.3.1_SRC_orig/windows/nglib.sln 2014-08-29 13:53:59.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/nglib.sln 2019-11-14 16:56:26.918326014 +0300
+@@ -1,32 +1,32 @@
+-\r
+-Microsoft Visual Studio Solution File, Format Version 13.00\r
+-# Visual Studio 2013\r
+-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "nglib", "nglib.vcxproj", "{2E260C8C-595C-442A-A962-51AC06EF8143}"\r
+-EndProject\r
+-Global\r
+- GlobalSection(SolutionConfigurationPlatforms) = preSolution\r
+- Debug|Win32 = Debug|Win32\r
+- Debug|x64 = Debug|x64\r
+- Release(OCC)|Win32 = Release(OCC)|Win32\r
+- Release(OCC)|x64 = Release(OCC)|x64\r
+- Release|Win32 = Release|Win32\r
+- Release|x64 = Release|x64\r
+- EndGlobalSection\r
+- GlobalSection(ProjectConfigurationPlatforms) = postSolution\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|Win32.ActiveCfg = Debug|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|Win32.Build.0 = Debug|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|x64.ActiveCfg = Debug|x64\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|x64.Build.0 = Debug|x64\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|Win32.ActiveCfg = Release(OCC)|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|Win32.Build.0 = Release(OCC)|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|x64.ActiveCfg = Release(OCC)|x64\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|x64.Build.0 = Release(OCC)|x64\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|Win32.ActiveCfg = Release|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|Win32.Build.0 = Release|Win32\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|x64.ActiveCfg = Release|x64\r
+- {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|x64.Build.0 = Release|x64\r
+- EndGlobalSection\r
+- GlobalSection(SolutionProperties) = preSolution\r
+- HideSolutionNode = FALSE\r
+- EndGlobalSection\r
+-EndGlobal\r
++
++Microsoft Visual Studio Solution File, Format Version 13.00
++# Visual Studio 2013
++Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "nglib", "nglib.vcxproj", "{2E260C8C-595C-442A-A962-51AC06EF8143}"
++EndProject
++Global
++ GlobalSection(SolutionConfigurationPlatforms) = preSolution
++ Debug|Win32 = Debug|Win32
++ Debug|x64 = Debug|x64
++ Release(OCC)|Win32 = Release(OCC)|Win32
++ Release(OCC)|x64 = Release(OCC)|x64
++ Release|Win32 = Release|Win32
++ Release|x64 = Release|x64
++ EndGlobalSection
++ GlobalSection(ProjectConfigurationPlatforms) = postSolution
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|Win32.ActiveCfg = Debug|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|Win32.Build.0 = Debug|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|x64.ActiveCfg = Debug|x64
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Debug|x64.Build.0 = Debug|x64
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|Win32.ActiveCfg = Release(OCC)|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|Win32.Build.0 = Release(OCC)|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|x64.ActiveCfg = Release(OCC)|x64
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release(OCC)|x64.Build.0 = Release(OCC)|x64
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|Win32.ActiveCfg = Release|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|Win32.Build.0 = Release|Win32
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|x64.ActiveCfg = Release|x64
++ {2E260C8C-595C-442A-A962-51AC06EF8143}.Release|x64.Build.0 = Release|x64
++ EndGlobalSection
++ GlobalSection(SolutionProperties) = preSolution
++ HideSolutionNode = FALSE
++ EndGlobalSection
++EndGlobal
+diff -Naur netgen-5.3.1_SRC_orig/windows/nglib.vcxproj netgen-5.3.1_SRC_modif/windows/nglib.vcxproj
+--- netgen-5.3.1_SRC_orig/windows/nglib.vcxproj 2014-08-29 13:53:59.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/nglib.vcxproj 2019-11-14 16:56:26.882327022 +0300
+@@ -1,632 +1,632 @@
+-<?xml version="1.0" encoding="utf-8"?>\r
+-<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">\r
+- <ItemGroup Label="ProjectConfigurations">\r
+- <ProjectConfiguration Include="Debug|Win32">\r
+- <Configuration>Debug</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Debug|x64">\r
+- <Configuration>Debug</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release(OCC)|Win32">\r
+- <Configuration>Release(OCC)</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release(OCC)|x64">\r
+- <Configuration>Release(OCC)</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release|Win32">\r
+- <Configuration>Release</Configuration>\r
+- <Platform>Win32</Platform>\r
+- </ProjectConfiguration>\r
+- <ProjectConfiguration Include="Release|x64">\r
+- <Configuration>Release</Configuration>\r
+- <Platform>x64</Platform>\r
+- </ProjectConfiguration>\r
+- </ItemGroup>\r
+- <PropertyGroup Label="Globals">\r
+- <ProjectGuid>{2E260C8C-595C-442A-A962-51AC06EF8143}</ProjectGuid>\r
+- <RootNamespace>nglib</RootNamespace>\r
+- <Keyword>Win32Proj</Keyword>\r
+- </PropertyGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- <WholeProgramOptimization>true</WholeProgramOptimization>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">\r
+- <ConfigurationType>DynamicLibrary</ConfigurationType>\r
+- <PlatformToolset>CTP_Nov2013</PlatformToolset>\r
+- <CharacterSet>Unicode</CharacterSet>\r
+- </PropertyGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />\r
+- <ImportGroup Label="ExtensionSettings">\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">\r
+- <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />\r
+- </ImportGroup>\r
+- <PropertyGroup Label="UserMacros" />\r
+- <PropertyGroup>\r
+- <_ProjectFileVersion>11.0.61030.0</_ProjectFileVersion>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Configuration)\</IntDir>\r
+- <LinkIncremental>true</LinkIncremental>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>\r
+- <LinkIncremental>true</LinkIncremental>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- </PropertyGroup>\r
+- <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">\r
+- <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>\r
+- <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>\r
+- <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>\r
+- </PropertyGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\pthread-w32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>EditAndContinue</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthread-w32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Windows</SubSystem>\r
+- <TargetMachine>MachineX86</TargetMachine>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Disabled</Optimization>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\pthread-w64\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <MinimalRebuild>true</MinimalRebuild>\r
+- <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>\r
+- <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>\r
+- <PrecompiledHeader />\r
+- <WarningLevel>Level3</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2_64.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthread-w64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- <GenerateDebugInformation>true</GenerateDebugInformation>\r
+- <SubSystem>Windows</SubSystem>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <FunctionLevelLinking>true</FunctionLevelLinking>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <ObjectFileName>$(IntDir)</ObjectFileName>\r
+- <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>\r
+- <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;zdll.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;NOTCL;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <FunctionLevelLinking>true</FunctionLevelLinking>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <ObjectFileName>$(IntDir)</ObjectFileName>\r
+- <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>\r
+- <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>\r
+- </BuildLog>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <AdditionalIncludeDirectories>$(CASROOT)\inc;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WNT;WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <FunctionLevelLinking>true</FunctionLevelLinking>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <ObjectFileName>$(IntDir)</ObjectFileName>\r
+- <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>\r
+- <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;zdll.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(CASROOT)\win32\vc8\lib;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">\r
+- <BuildLog>\r
+- <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>\r
+- </BuildLog>\r
+- <Midl>\r
+- <TargetEnvironment>X64</TargetEnvironment>\r
+- </Midl>\r
+- <ClCompile>\r
+- <Optimization>Full</Optimization>\r
+- <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>\r
+- <IntrinsicFunctions>true</IntrinsicFunctions>\r
+- <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>\r
+- <AdditionalIncludeDirectories>$(CASROOT)\inc;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;$(SolutionDir)..\..\ext_libs\zlib\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>\r
+- <PreprocessorDefinitions>WNT;WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;_OCC64;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>\r
+- <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>\r
+- <FunctionLevelLinking>true</FunctionLevelLinking>\r
+- <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>\r
+- <PrecompiledHeader />\r
+- <ObjectFileName>$(IntDir)</ObjectFileName>\r
+- <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>\r
+- <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>\r
+- <WarningLevel>Level2</WarningLevel>\r
+- <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>\r
+- <MultiProcessorCompilation>true</MultiProcessorCompilation>\r
+- <DisableSpecificWarnings>4250</DisableSpecificWarnings>\r
+- </ClCompile>\r
+- <Link>\r
+- <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>\r
+- <AdditionalLibraryDirectories>$(CASROOT)\win64\vc9\lib;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>\r
+- <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>\r
+- <TargetMachine>MachineX64</TargetMachine>\r
+- </Link>\r
+- <Manifest>\r
+- <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>\r
+- </Manifest>\r
+- <ManifestResourceCompile>\r
+- <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>\r
+- </ManifestResourceCompile>\r
+- <PostBuildEvent>\r
+- <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>\r
+- </PostBuildEvent>\r
+- </ItemDefinitionGroup>\r
+- <ItemGroup>\r
+- <ClCompile Include="..\libsrc\general\gzstream.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\adfront2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\adfront3.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\adtree.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\algprim.cpp" />\r
+- <ClCompile Include="..\libsrc\general\array.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\basegeom.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\bfgs.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\bisect.cpp" />\r
+- <ClCompile Include="..\libsrc\general\bitarray.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\boundarylayer.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\brick.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\bspline2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\clusters.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\csgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\csgparser.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\curve2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\curvedelems.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\delaunay.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\delaunay2d.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\densemat.cpp" />\r
+- <ClCompile Include="..\libsrc\general\dynamicmem.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\edgeflw.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\explicitcurve2d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\extrusion.cpp" />\r
+- <ClCompile Include="..\libsrc\general\flags.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\gencyl.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\genmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\genmesh2d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geom2d.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\geom2dmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geom3d.cpp" />\r
+- <ClCompile Include="..\libsrc\geom2d\geometry2d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geomfuncs.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\geomsearch.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\geomtest3d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\global.cpp" />\r
+- <ClCompile Include="..\libsrc\general\hashtabl.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\hprefinement.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\identify.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve2gen.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\improve3.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\linopt.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\linsearch.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\localh.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\manifold.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshclass.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshfunc.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshfunc2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshing2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshing3.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\meshstlsurface.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\meshsurf.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshtool.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\meshtype.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\msghandler.cpp" />\r
+- <ClCompile Include="..\libsrc\general\mystring.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\netrule2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\netrule3.cpp" />\r
+- <ClCompile Include="..\libsrc\general\ngexception.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\nginterface.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\nginterface_v2.cpp" />\r
+- <ClCompile Include="..\nglib\nglib.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occgenmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\occmeshsurf.cpp" />\r
+- <ClCompile Include="..\libsrc\general\optmem.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parallelmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\paralleltop.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parser2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\parser3.cpp" />\r
+- <ClCompile Include="..\libsrc\general\parthreads.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\polyhedra.cpp" />\r
+- <ClCompile Include="..\libsrc\linalg\polynomial.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\prism2rls.cpp" />\r
+- <ClCompile Include="..\libsrc\general\profiler.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\pyramid2rls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\pyramidrls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\quadrls.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\read_fnf_mesh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\readtetmesh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\readuser.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\refine.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\revolution.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\ruler2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\ruler3.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\secondorder.cpp" />\r
+- <ClCompile Include="..\libsrc\general\seti.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\singularref.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing2.5.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing2.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\smoothing3.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\solid.cpp" />\r
+- <ClCompile Include="..\libsrc\general\sort.cpp" />\r
+- <ClCompile Include="..\libsrc\general\spbita2d.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\specials.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\specpoin.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\spline.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\spline3d.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\splinegeometry.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeom.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeomchart.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlgeommesh.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stlline.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stltool.cpp" />\r
+- <ClCompile Include="..\libsrc\stlgeom\stltopology.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\surface.cpp" />\r
+- <ClCompile Include="..\libsrc\general\symbolta.cpp" />\r
+- <ClCompile Include="..\libsrc\general\table.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\tetrarls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\topology.cpp" />\r
+- <ClCompile Include="..\libsrc\gprim\transform3d.cpp" />\r
+- <ClCompile Include="..\libsrc\csg\triapprox.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\triarls.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\validate.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeabaqus.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writediffpack.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writedolfin.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeelmer.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writefeap.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writefluent.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writegmsh.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writegmsh2.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writejcm.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeOpenFOAM15x.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writepermas.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetecplot.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetet.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writetochnog.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\writeuser.cpp" />\r
+- <ClCompile Include="..\libsrc\interface\wuchemnitz.cpp" />\r
+- <ClCompile Include="..\libsrc\meshing\zrefine.cpp" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Inter2d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Inter3d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop2d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Loop3d.cxx" />\r
+- <ClCompile Include="..\libsrc\occ\Partition_Spliter.cxx" />\r
+- </ItemGroup>\r
+- <ItemGroup>\r
+- <ClInclude Include="..\libsrc\include\acisgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\adfront2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\adfront3.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\adtree.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\algprim.hpp" />\r
+- <ClInclude Include="..\libsrc\general\array.hpp" />\r
+- <ClInclude Include="..\libsrc\general\autodiff.hpp" />\r
+- <ClInclude Include="..\libsrc\general\autoptr.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\basegeom.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\bisect.hpp" />\r
+- <ClInclude Include="..\libsrc\general\bitarray.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\boundarylayer.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\brick.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\classifyhpel.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\clusters.hpp" />\r
+- <ClInclude Include="..\libsrc\include\csg.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csg.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\csgparser.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\curve2d.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\curvedelems.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\densemat.hpp" />\r
+- <ClInclude Include="..\libsrc\general\dynamicmem.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\edgeflw.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\explicitcurve2d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\extrusion.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\findip.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\findip2.hpp" />\r
+- <ClInclude Include="..\libsrc\general\flags.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\gencyl.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geom2d.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\geom2dmesh.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geom3d.hpp" />\r
+- <ClInclude Include="..\libsrc\include\geometry2d.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\geometry2d.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomfuncs.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\geoml.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomobjects.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomobjects2.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomops.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomops2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\geomsearch.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\geomtest3d.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\global.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\gprim.hpp" />\r
+- <ClInclude Include="..\libsrc\include\gprim.hpp" />\r
+- <ClInclude Include="..\libsrc\general\hashtabl.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_hex.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_prism.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_pyramid.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_quad.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_segm.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_tet.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hpref_trig.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\hprefinement.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\identify.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\improve2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\improve3.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\linalg.hpp" />\r
+- <ClInclude Include="..\libsrc\include\linalg.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\localh.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\manifold.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshclass.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshfunc.hpp" />\r
+- <ClInclude Include="..\libsrc\include\meshing.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshing3.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\meshstlsurface.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\meshsurf.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshtool.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\meshtype.hpp" />\r
+- <ClInclude Include="..\libsrc\general\mpi_interface.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\msghandler.hpp" />\r
+- <ClInclude Include="..\libsrc\include\myadt.hpp" />\r
+- <ClInclude Include="..\libsrc\general\myadt.hpp" />\r
+- <ClInclude Include="..\libsrc\include\mydefs.hpp" />\r
+- <ClInclude Include="..\libsrc\include\mystdlib.h" />\r
+- <ClInclude Include="..\libsrc\general\mystring.hpp" />\r
+- <ClInclude Include="..\libsrc\general\netgenout.hpp" />\r
+- <ClInclude Include="..\libsrc\general\ngexception.hpp" />\r
+- <ClInclude Include="..\nglib\nglib.h" />\r
+- <ClInclude Include="..\libsrc\include\occgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\occ\occmeshsurf.hpp" />\r
+- <ClInclude Include="..\libsrc\include\opti.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\opti.hpp" />\r
+- <ClInclude Include="..\libsrc\general\optmem.hpp" />\r
+- <ClInclude Include="..\libsrc\include\parallel.hpp" />\r
+- <ClInclude Include="..\libsrc\include\parallelinterface.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\paralleltop.hpp" />\r
+- <ClInclude Include="..\libsrc\general\parthreads.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\polyhedra.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\polynomial.hpp" />\r
+- <ClInclude Include="..\libsrc\general\profiler.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\revolution.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\ruler2.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\ruler3.hpp" />\r
+- <ClInclude Include="..\libsrc\general\seti.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\singularref.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\solid.hpp" />\r
+- <ClInclude Include="..\libsrc\general\sort.hpp" />\r
+- <ClInclude Include="..\libsrc\general\spbita2d.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\specials.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\specpoin.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\spline.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\spline2d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\spline3d.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\splinegeometry.hpp" />\r
+- <ClInclude Include="..\libsrc\geom2d\splinegeometry2.hpp" />\r
+- <ClInclude Include="..\libsrc\general\stack.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stlgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\include\stlgeom.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stlline.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stltool.hpp" />\r
+- <ClInclude Include="..\libsrc\stlgeom\stltopology.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\surface.hpp" />\r
+- <ClInclude Include="..\libsrc\general\symbolta.hpp" />\r
+- <ClInclude Include="..\libsrc\general\table.hpp" />\r
+- <ClInclude Include="..\libsrc\general\template.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\topology.hpp" />\r
+- <ClInclude Include="..\libsrc\gprim\transform3d.hpp" />\r
+- <ClInclude Include="..\libsrc\csg\triapprox.hpp" />\r
+- <ClInclude Include="..\libsrc\meshing\validate.hpp" />\r
+- <ClInclude Include="..\libsrc\linalg\vector.hpp" />\r
+- <ClInclude Include="..\libsrc\interface\writeuser.hpp" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Inter2d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Inter3d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop2d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Loop3d.hxx" />\r
+- <ClInclude Include="..\libsrc\occ\Partition_Spliter.hxx" />\r
+- </ItemGroup>\r
+- <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />\r
+- <ImportGroup Label="ExtensionTargets">\r
+- </ImportGroup>\r
++<?xml version="1.0" encoding="utf-8"?>
++<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
++ <ItemGroup Label="ProjectConfigurations">
++ <ProjectConfiguration Include="Debug|Win32">
++ <Configuration>Debug</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Debug|x64">
++ <Configuration>Debug</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release(OCC)|Win32">
++ <Configuration>Release(OCC)</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release(OCC)|x64">
++ <Configuration>Release(OCC)</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release|Win32">
++ <Configuration>Release</Configuration>
++ <Platform>Win32</Platform>
++ </ProjectConfiguration>
++ <ProjectConfiguration Include="Release|x64">
++ <Configuration>Release</Configuration>
++ <Platform>x64</Platform>
++ </ProjectConfiguration>
++ </ItemGroup>
++ <PropertyGroup Label="Globals">
++ <ProjectGuid>{2E260C8C-595C-442A-A962-51AC06EF8143}</ProjectGuid>
++ <RootNamespace>nglib</RootNamespace>
++ <Keyword>Win32Proj</Keyword>
++ </PropertyGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ <WholeProgramOptimization>true</WholeProgramOptimization>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
++ <ConfigurationType>DynamicLibrary</ConfigurationType>
++ <PlatformToolset>CTP_Nov2013</PlatformToolset>
++ <CharacterSet>Unicode</CharacterSet>
++ </PropertyGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
++ <ImportGroup Label="ExtensionSettings">
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
++ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
++ </ImportGroup>
++ <PropertyGroup Label="UserMacros" />
++ <PropertyGroup>
++ <_ProjectFileVersion>11.0.61030.0</_ProjectFileVersion>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
++ <LinkIncremental>true</LinkIncremental>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>
++ <LinkIncremental>true</LinkIncremental>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ </PropertyGroup>
++ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">
++ <OutDir>$(SolutionDir)$(ProjectName)\$(Platform)\$(Configuration)\</OutDir>
++ <IntDir>$(ProjectName)\$(Platform)\$(Configuration)\</IntDir>
++ <ExtensionsToDeleteOnClean>*.obj%3b*.ilk%3b*.tlb%3b*.tli%3b*.tlh%3b*.tmp%3b*.rsp%3b*.pgc%3b*.pgd%3b*.meta%3b$(TargetPath)</ExtensionsToDeleteOnClean>
++ </PropertyGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\pthread-w32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthread-w32\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Windows</SubSystem>
++ <TargetMachine>MachineX86</TargetMachine>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Disabled</Optimization>
++ <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\pthread-w64\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;_DEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <MinimalRebuild>true</MinimalRebuild>
++ <BasicRuntimeChecks>EnableFastChecks</BasicRuntimeChecks>
++ <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
++ <PrecompiledHeader />
++ <WarningLevel>Level3</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2_64.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthread-w64\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ <GenerateDebugInformation>true</GenerateDebugInformation>
++ <SubSystem>Windows</SubSystem>
++ <TargetMachine>MachineX64</TargetMachine>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <FunctionLevelLinking>true</FunctionLevelLinking>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <ObjectFileName>$(IntDir)</ObjectFileName>
++ <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>
++ <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;zdll.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <AdditionalIncludeDirectories>$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;_WIN32_WINNT=0x0502;NOTCL;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <FunctionLevelLinking>true</FunctionLevelLinking>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <ObjectFileName>$(IntDir)</ObjectFileName>
++ <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>
++ <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ <TargetMachine>MachineX64</TargetMachine>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|Win32'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName).htm</Path>
++ </BuildLog>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <AdditionalIncludeDirectories>$(CASROOT)\inc;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\..\ext_libs\zlib\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WNT;WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <FunctionLevelLinking>true</FunctionLevelLinking>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <ObjectFileName>$(IntDir)</ObjectFileName>
++ <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>
++ <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;zdll.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKDCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(CASROOT)\win32\vc8\lib;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x86;$(SolutionDir)..\..\ext_libs\zlib\x86\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release(OCC)|x64'">
++ <BuildLog>
++ <Path>$(SolutionDir)\BuildLog_$(ProjectName)_$(Platform).htm</Path>
++ </BuildLog>
++ <Midl>
++ <TargetEnvironment>X64</TargetEnvironment>
++ </Midl>
++ <ClCompile>
++ <Optimization>Full</Optimization>
++ <InlineFunctionExpansion>AnySuitable</InlineFunctionExpansion>
++ <IntrinsicFunctions>true</IntrinsicFunctions>
++ <FavorSizeOrSpeed>Speed</FavorSizeOrSpeed>
++ <AdditionalIncludeDirectories>$(CASROOT)\inc;$(SolutionDir)..\..\ext_libs\pthreads-Win32\include;$(SolutionDir)..\libsrc\include;$(SolutionDir)..\nglib;$(SolutionDir)..\;$(SolutionDir)..\..\ext_libs\zlib\include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
++ <PreprocessorDefinitions>WNT;WIN32;NDEBUG;_WINDOWS;_USRDLL;NGLIB_EXPORTS;MSVC_EXPRESS;Standard_EXPORT=;OCCGEOMETRY;_OCC64;_WIN32_WINNT=0x0502;%(PreprocessorDefinitions)</PreprocessorDefinitions>
++ <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
++ <FunctionLevelLinking>true</FunctionLevelLinking>
++ <EnableEnhancedInstructionSet>StreamingSIMDExtensions</EnableEnhancedInstructionSet>
++ <PrecompiledHeader />
++ <ObjectFileName>$(IntDir)</ObjectFileName>
++ <ProgramDataBaseFileName>$(IntDir)vc90.pdb</ProgramDataBaseFileName>
++ <XMLDocumentationFileName>$(IntDir)</XMLDocumentationFileName>
++ <WarningLevel>Level2</WarningLevel>
++ <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
++ <MultiProcessorCompilation>true</MultiProcessorCompilation>
++ <DisableSpecificWarnings>4250</DisableSpecificWarnings>
++ </ClCompile>
++ <Link>
++ <AdditionalDependencies>pthreadVC2.lib;zlib1.lib;TKernel.lib;TKGeomBase.lib;TKMath.lib;TKG2d.lib;TKG3d.lib;TKXSBase.lib;TKOffset.lib;TKFillet.lib;TKShHealing.lib;TKMesh.lib;TKMeshVS.lib;TKTopAlgo.lib;TKGeomAlgo.lib;TKBool.lib;TKPrim.lib;TKBO.lib;TKIGES.lib;TKBRep.lib;TKSTEPBase.lib;TKSTEP.lib;TKSTL.lib;TKSTEPAttr.lib;TKSTEP209.lib;TKXDESTEP.lib;TKXDEIGES.lib;TKXCAF.lib;TKLCAF.lib;%(AdditionalDependencies)</AdditionalDependencies>
++ <AdditionalLibraryDirectories>$(CASROOT)\win64\vc9\lib;$(SolutionDir)..\..\ext_libs\pthreads-Win32\lib\x64;$(SolutionDir)..\..\ext_libs\zlib\x64\\lib;%(AdditionalLibraryDirectories)</AdditionalLibraryDirectories>
++ <ManifestFile>$(OutDir)$(TargetFileName).intermediate.manifest</ManifestFile>
++ <TargetMachine>MachineX64</TargetMachine>
++ </Link>
++ <Manifest>
++ <OutputManifestFile>$(OutDir)$(TargetFileName).embed.manifest</OutputManifestFile>
++ </Manifest>
++ <ManifestResourceCompile>
++ <ResourceOutputFileName>$(OutDir)$(TargetFileName).embed.manifest.res</ResourceOutputFileName>
++ </ManifestResourceCompile>
++ <PostBuildEvent>
++ <Command>"$(ProjectDir)\postBuild_nglib.bat" "$(ProjectName)" "$(TargetFileName)" "$(Configuration)" "$(Platform)" "$(ProjectDir)"</Command>
++ </PostBuildEvent>
++ </ItemDefinitionGroup>
++ <ItemGroup>
++ <ClCompile Include="..\libsrc\general\gzstream.cpp" />
++ <ClCompile Include="..\libsrc\meshing\adfront2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\adfront3.cpp" />
++ <ClCompile Include="..\libsrc\gprim\adtree.cpp" />
++ <ClCompile Include="..\libsrc\csg\algprim.cpp" />
++ <ClCompile Include="..\libsrc\general\array.cpp" />
++ <ClCompile Include="..\libsrc\meshing\basegeom.cpp" />
++ <ClCompile Include="..\libsrc\linalg\bfgs.cpp" />
++ <ClCompile Include="..\libsrc\meshing\bisect.cpp" />
++ <ClCompile Include="..\libsrc\general\bitarray.cpp" />
++ <ClCompile Include="..\libsrc\meshing\boundarylayer.cpp" />
++ <ClCompile Include="..\libsrc\csg\brick.cpp" />
++ <ClCompile Include="..\libsrc\csg\bspline2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\clusters.cpp" />
++ <ClCompile Include="..\libsrc\csg\csgeom.cpp" />
++ <ClCompile Include="..\libsrc\csg\csgparser.cpp" />
++ <ClCompile Include="..\libsrc\csg\curve2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\curvedelems.cpp" />
++ <ClCompile Include="..\libsrc\meshing\delaunay.cpp" />
++ <ClCompile Include="..\libsrc\meshing\delaunay2d.cpp" />
++ <ClCompile Include="..\libsrc\linalg\densemat.cpp" />
++ <ClCompile Include="..\libsrc\general\dynamicmem.cpp" />
++ <ClCompile Include="..\libsrc\csg\edgeflw.cpp" />
++ <ClCompile Include="..\libsrc\csg\explicitcurve2d.cpp" />
++ <ClCompile Include="..\libsrc\csg\extrusion.cpp" />
++ <ClCompile Include="..\libsrc\general\flags.cpp" />
++ <ClCompile Include="..\libsrc\csg\gencyl.cpp" />
++ <ClCompile Include="..\libsrc\csg\genmesh.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\genmesh2d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geom2d.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\geom2dmesh.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geom3d.cpp" />
++ <ClCompile Include="..\libsrc\geom2d\geometry2d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geomfuncs.cpp" />
++ <ClCompile Include="..\libsrc\meshing\geomsearch.cpp" />
++ <ClCompile Include="..\libsrc\gprim\geomtest3d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\global.cpp" />
++ <ClCompile Include="..\libsrc\general\hashtabl.cpp" />
++ <ClCompile Include="..\libsrc\meshing\hprefinement.cpp" />
++ <ClCompile Include="..\libsrc\csg\identify.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve2gen.cpp" />
++ <ClCompile Include="..\libsrc\meshing\improve3.cpp" />
++ <ClCompile Include="..\libsrc\linalg\linopt.cpp" />
++ <ClCompile Include="..\libsrc\linalg\linsearch.cpp" />
++ <ClCompile Include="..\libsrc\meshing\localh.cpp" />
++ <ClCompile Include="..\libsrc\csg\manifold.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshclass.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshfunc.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshfunc2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshing2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshing3.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\meshstlsurface.cpp" />
++ <ClCompile Include="..\libsrc\csg\meshsurf.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshtool.cpp" />
++ <ClCompile Include="..\libsrc\meshing\meshtype.cpp" />
++ <ClCompile Include="..\libsrc\meshing\msghandler.cpp" />
++ <ClCompile Include="..\libsrc\general\mystring.cpp" />
++ <ClCompile Include="..\libsrc\meshing\netrule2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\netrule3.cpp" />
++ <ClCompile Include="..\libsrc\general\ngexception.cpp" />
++ <ClCompile Include="..\libsrc\interface\nginterface.cpp" />
++ <ClCompile Include="..\libsrc\interface\nginterface_v2.cpp" />
++ <ClCompile Include="..\nglib\nglib.cpp" />
++ <ClCompile Include="..\libsrc\occ\occgenmesh.cpp" />
++ <ClCompile Include="..\libsrc\occ\occgeom.cpp" />
++ <ClCompile Include="..\libsrc\occ\occmeshsurf.cpp" />
++ <ClCompile Include="..\libsrc\general\optmem.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parallelmesh.cpp" />
++ <ClCompile Include="..\libsrc\meshing\paralleltop.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parser2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\parser3.cpp" />
++ <ClCompile Include="..\libsrc\general\parthreads.cpp" />
++ <ClCompile Include="..\libsrc\csg\polyhedra.cpp" />
++ <ClCompile Include="..\libsrc\linalg\polynomial.cpp" />
++ <ClCompile Include="..\libsrc\meshing\prism2rls.cpp" />
++ <ClCompile Include="..\libsrc\general\profiler.cpp" />
++ <ClCompile Include="..\libsrc\meshing\pyramid2rls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\pyramidrls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\quadrls.cpp" />
++ <ClCompile Include="..\libsrc\interface\read_fnf_mesh.cpp" />
++ <ClCompile Include="..\libsrc\interface\readtetmesh.cpp" />
++ <ClCompile Include="..\libsrc\interface\readuser.cpp" />
++ <ClCompile Include="..\libsrc\meshing\refine.cpp" />
++ <ClCompile Include="..\libsrc\csg\revolution.cpp" />
++ <ClCompile Include="..\libsrc\meshing\ruler2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\ruler3.cpp" />
++ <ClCompile Include="..\libsrc\meshing\secondorder.cpp" />
++ <ClCompile Include="..\libsrc\general\seti.cpp" />
++ <ClCompile Include="..\libsrc\csg\singularref.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing2.5.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing2.cpp" />
++ <ClCompile Include="..\libsrc\meshing\smoothing3.cpp" />
++ <ClCompile Include="..\libsrc\csg\solid.cpp" />
++ <ClCompile Include="..\libsrc\general\sort.cpp" />
++ <ClCompile Include="..\libsrc\general\spbita2d.cpp" />
++ <ClCompile Include="..\libsrc\meshing\specials.cpp" />
++ <ClCompile Include="..\libsrc\csg\specpoin.cpp" />
++ <ClCompile Include="..\libsrc\gprim\spline.cpp" />
++ <ClCompile Include="..\libsrc\csg\spline3d.cpp" />
++ <ClCompile Include="..\libsrc\gprim\splinegeometry.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeom.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeomchart.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlgeommesh.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stlline.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stltool.cpp" />
++ <ClCompile Include="..\libsrc\stlgeom\stltopology.cpp" />
++ <ClCompile Include="..\libsrc\csg\surface.cpp" />
++ <ClCompile Include="..\libsrc\general\symbolta.cpp" />
++ <ClCompile Include="..\libsrc\general\table.cpp" />
++ <ClCompile Include="..\libsrc\meshing\tetrarls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\topology.cpp" />
++ <ClCompile Include="..\libsrc\gprim\transform3d.cpp" />
++ <ClCompile Include="..\libsrc\csg\triapprox.cpp" />
++ <ClCompile Include="..\libsrc\meshing\triarls.cpp" />
++ <ClCompile Include="..\libsrc\meshing\validate.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeabaqus.cpp" />
++ <ClCompile Include="..\libsrc\interface\writediffpack.cpp" />
++ <ClCompile Include="..\libsrc\interface\writedolfin.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeelmer.cpp" />
++ <ClCompile Include="..\libsrc\interface\writefeap.cpp" />
++ <ClCompile Include="..\libsrc\interface\writefluent.cpp" />
++ <ClCompile Include="..\libsrc\interface\writegmsh.cpp" />
++ <ClCompile Include="..\libsrc\interface\writegmsh2.cpp" />
++ <ClCompile Include="..\libsrc\interface\writejcm.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeOpenFOAM15x.cpp" />
++ <ClCompile Include="..\libsrc\interface\writepermas.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetecplot.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetet.cpp" />
++ <ClCompile Include="..\libsrc\interface\writetochnog.cpp" />
++ <ClCompile Include="..\libsrc\interface\writeuser.cpp" />
++ <ClCompile Include="..\libsrc\interface\wuchemnitz.cpp" />
++ <ClCompile Include="..\libsrc\meshing\zrefine.cpp" />
++ <ClCompile Include="..\libsrc\occ\Partition_Inter2d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Inter3d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop2d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Loop3d.cxx" />
++ <ClCompile Include="..\libsrc\occ\Partition_Spliter.cxx" />
++ </ItemGroup>
++ <ItemGroup>
++ <ClInclude Include="..\libsrc\include\acisgeom.hpp" />
++ <ClInclude Include="..\libsrc\meshing\adfront2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\adfront3.hpp" />
++ <ClInclude Include="..\libsrc\gprim\adtree.hpp" />
++ <ClInclude Include="..\libsrc\csg\algprim.hpp" />
++ <ClInclude Include="..\libsrc\general\array.hpp" />
++ <ClInclude Include="..\libsrc\general\autodiff.hpp" />
++ <ClInclude Include="..\libsrc\general\autoptr.hpp" />
++ <ClInclude Include="..\libsrc\meshing\basegeom.hpp" />
++ <ClInclude Include="..\libsrc\meshing\bisect.hpp" />
++ <ClInclude Include="..\libsrc\general\bitarray.hpp" />
++ <ClInclude Include="..\libsrc\meshing\boundarylayer.hpp" />
++ <ClInclude Include="..\libsrc\csg\brick.hpp" />
++ <ClInclude Include="..\libsrc\meshing\classifyhpel.hpp" />
++ <ClInclude Include="..\libsrc\meshing\clusters.hpp" />
++ <ClInclude Include="..\libsrc\include\csg.hpp" />
++ <ClInclude Include="..\libsrc\csg\csg.hpp" />
++ <ClInclude Include="..\libsrc\csg\csgeom.hpp" />
++ <ClInclude Include="..\libsrc\csg\csgparser.hpp" />
++ <ClInclude Include="..\libsrc\csg\curve2d.hpp" />
++ <ClInclude Include="..\libsrc\meshing\curvedelems.hpp" />
++ <ClInclude Include="..\libsrc\linalg\densemat.hpp" />
++ <ClInclude Include="..\libsrc\general\dynamicmem.hpp" />
++ <ClInclude Include="..\libsrc\csg\edgeflw.hpp" />
++ <ClInclude Include="..\libsrc\csg\explicitcurve2d.hpp" />
++ <ClInclude Include="..\libsrc\csg\extrusion.hpp" />
++ <ClInclude Include="..\libsrc\meshing\findip.hpp" />
++ <ClInclude Include="..\libsrc\meshing\findip2.hpp" />
++ <ClInclude Include="..\libsrc\general\flags.hpp" />
++ <ClInclude Include="..\libsrc\csg\gencyl.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geom2d.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\geom2dmesh.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geom3d.hpp" />
++ <ClInclude Include="..\libsrc\include\geometry2d.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\geometry2d.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomfuncs.hpp" />
++ <ClInclude Include="..\libsrc\csg\geoml.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomobjects.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomobjects2.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomops.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomops2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\geomsearch.hpp" />
++ <ClInclude Include="..\libsrc\gprim\geomtest3d.hpp" />
++ <ClInclude Include="..\libsrc\meshing\global.hpp" />
++ <ClInclude Include="..\libsrc\gprim\gprim.hpp" />
++ <ClInclude Include="..\libsrc\include\gprim.hpp" />
++ <ClInclude Include="..\libsrc\general\hashtabl.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_hex.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_prism.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_pyramid.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_quad.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_segm.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_tet.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hpref_trig.hpp" />
++ <ClInclude Include="..\libsrc\meshing\hprefinement.hpp" />
++ <ClInclude Include="..\libsrc\csg\identify.hpp" />
++ <ClInclude Include="..\libsrc\meshing\improve2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\improve3.hpp" />
++ <ClInclude Include="..\libsrc\linalg\linalg.hpp" />
++ <ClInclude Include="..\libsrc\include\linalg.hpp" />
++ <ClInclude Include="..\libsrc\meshing\localh.hpp" />
++ <ClInclude Include="..\libsrc\csg\manifold.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshclass.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshfunc.hpp" />
++ <ClInclude Include="..\libsrc\include\meshing.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshing3.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\meshstlsurface.hpp" />
++ <ClInclude Include="..\libsrc\csg\meshsurf.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshtool.hpp" />
++ <ClInclude Include="..\libsrc\meshing\meshtype.hpp" />
++ <ClInclude Include="..\libsrc\general\mpi_interface.hpp" />
++ <ClInclude Include="..\libsrc\meshing\msghandler.hpp" />
++ <ClInclude Include="..\libsrc\include\myadt.hpp" />
++ <ClInclude Include="..\libsrc\general\myadt.hpp" />
++ <ClInclude Include="..\libsrc\include\mydefs.hpp" />
++ <ClInclude Include="..\libsrc\include\mystdlib.h" />
++ <ClInclude Include="..\libsrc\general\mystring.hpp" />
++ <ClInclude Include="..\libsrc\general\netgenout.hpp" />
++ <ClInclude Include="..\libsrc\general\ngexception.hpp" />
++ <ClInclude Include="..\nglib\nglib.h" />
++ <ClInclude Include="..\libsrc\include\occgeom.hpp" />
++ <ClInclude Include="..\libsrc\occ\occmeshsurf.hpp" />
++ <ClInclude Include="..\libsrc\include\opti.hpp" />
++ <ClInclude Include="..\libsrc\linalg\opti.hpp" />
++ <ClInclude Include="..\libsrc\general\optmem.hpp" />
++ <ClInclude Include="..\libsrc\include\parallel.hpp" />
++ <ClInclude Include="..\libsrc\include\parallelinterface.hpp" />
++ <ClInclude Include="..\libsrc\meshing\paralleltop.hpp" />
++ <ClInclude Include="..\libsrc\general\parthreads.hpp" />
++ <ClInclude Include="..\libsrc\csg\polyhedra.hpp" />
++ <ClInclude Include="..\libsrc\linalg\polynomial.hpp" />
++ <ClInclude Include="..\libsrc\general\profiler.hpp" />
++ <ClInclude Include="..\libsrc\csg\revolution.hpp" />
++ <ClInclude Include="..\libsrc\meshing\ruler2.hpp" />
++ <ClInclude Include="..\libsrc\meshing\ruler3.hpp" />
++ <ClInclude Include="..\libsrc\general\seti.hpp" />
++ <ClInclude Include="..\libsrc\csg\singularref.hpp" />
++ <ClInclude Include="..\libsrc\csg\solid.hpp" />
++ <ClInclude Include="..\libsrc\general\sort.hpp" />
++ <ClInclude Include="..\libsrc\general\spbita2d.hpp" />
++ <ClInclude Include="..\libsrc\meshing\specials.hpp" />
++ <ClInclude Include="..\libsrc\csg\specpoin.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\spline.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\spline2d.hpp" />
++ <ClInclude Include="..\libsrc\csg\spline3d.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\splinegeometry.hpp" />
++ <ClInclude Include="..\libsrc\geom2d\splinegeometry2.hpp" />
++ <ClInclude Include="..\libsrc\general\stack.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stlgeom.hpp" />
++ <ClInclude Include="..\libsrc\include\stlgeom.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stlline.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stltool.hpp" />
++ <ClInclude Include="..\libsrc\stlgeom\stltopology.hpp" />
++ <ClInclude Include="..\libsrc\csg\surface.hpp" />
++ <ClInclude Include="..\libsrc\general\symbolta.hpp" />
++ <ClInclude Include="..\libsrc\general\table.hpp" />
++ <ClInclude Include="..\libsrc\general\template.hpp" />
++ <ClInclude Include="..\libsrc\meshing\topology.hpp" />
++ <ClInclude Include="..\libsrc\gprim\transform3d.hpp" />
++ <ClInclude Include="..\libsrc\csg\triapprox.hpp" />
++ <ClInclude Include="..\libsrc\meshing\validate.hpp" />
++ <ClInclude Include="..\libsrc\linalg\vector.hpp" />
++ <ClInclude Include="..\libsrc\interface\writeuser.hpp" />
++ <ClInclude Include="..\libsrc\occ\Partition_Inter2d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Inter3d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop2d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Loop3d.hxx" />
++ <ClInclude Include="..\libsrc\occ\Partition_Spliter.hxx" />
++ </ItemGroup>
++ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
++ <ImportGroup Label="ExtensionTargets">
++ </ImportGroup>
+ </Project>
+\ No newline at end of file
+diff -Naur netgen-5.3.1_SRC_orig/windows/postBuild_netgen.bat netgen-5.3.1_SRC_modif/windows/postBuild_netgen.bat
+--- netgen-5.3.1_SRC_orig/windows/postBuild_netgen.bat 2014-10-06 14:59:42.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/postBuild_netgen.bat 2019-11-14 16:56:26.846328030 +0300
+@@ -1,162 +1,162 @@
+-REM *********************************************************************************\r
+-REM *** Netgen Windows Post-Build Script\r
+-REM *** Author: Philippose Rajan\r
+-REM *** Date: 31/01/2009\r
+-REM ***\r
+-REM *** Used to perform an "Install" of the generated executable \r
+-REM *** along with the required *.tcl files\r
+-REM ***\r
+-REM *** Call from Visual C++ using:\r
+-REM *** postBuild_netgen.bat $(ProjectName) $(TargetFileName) $(ConfigurationName) $(ProjectDir) <lib filename>\r
+-REM *********************************************************************************\r
+-if [%1]==[] goto InputParamsFailed\r
+-set PROJ_NAME=%~1\r
+-set PROJ_EXEC=%~2\r
+-set BUILD_TYPE=%~3\r
+-set BUILD_ARCH=%~4\r
+-set PROJ_DIR=%~5\r
+-set LIB_NAME=%~6\r
+-\r
+-REM *** Change these Folders if required ***\r
+-REM Check if the environment variable NETGENDIR exists, \r
+-REM and use it as the installation folder\r
+-set W_WO_OCC=%BUILD_TYPE:~-4,3%\r
+-if defined NETGENDIR (\r
+- echo Environment variable NETGENDIR found: %NETGENDIR%\r
+- set INSTALL_FOLDER=%NETGENDIR%\..\r
+-) else (\r
+- echo Environment variable NETGENDIR not found.... using default location!!!\r
+- if /i "%W_WO_OCC%" == "OCC" (\r
+- set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instOCC_%BUILD_ARCH%\r
+- ) else (\r
+- set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instNoOCC_%BUILD_ARCH%\r
+- ) \r
+-)\r
+- \r
+-set NETGEN_TCLSRC=%PROJ_DIR%..\ng\r
+-set NETGEN_LIBINC=%PROJ_DIR%..\libsrc\include\r
+-set NETGEN_NGSINC=%PROJ_DIR%..\libsrc\r
+-\r
+-REM *** Start the Installation procedure ***\r
+-echo POSTBUILD Script for %PROJ_NAME% ........\r
+-\r
+-REM *** Embed the Windows Manifest into the Executable File ***\r
+-REM echo Embedding Manifest into the executable: %PROJ_EXEC% ....\r
+-REM mt.exe -manifest "%BUILD_TYPE%\%PROJ_EXEC%.intermediate.manifest" "-outputresource:%BUILD_TYPE%\%PROJ_EXEC%;#1" \r
+-REM if errorlevel 1 goto ManifestFailed\r
+-REM echo Embedding Manifest into the executable: Completed OK!!\r
+-\r
+-REM *** Copy the core TCL files into the Install Folder ***\r
+-echo Installing core TCL files into %INSTALL_FOLDER%\bin ....\r
+-xcopy "%NETGEN_TCLSRC%\*.tcl" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+-xcopy "%NETGEN_TCLSRC%\*.ocf" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+-if errorlevel 1 goto CoreTCLFailed\r
+-echo Installing core TCL Files: Completed OK!!\r
+-\r
+-REM *** Copy any more auxiliary TCL files into the Install Folder ***\r
+-REM if errorlevel 1 goto AuxTCLFailed\r
+-REM echo Installing auxiliary TCL Files: Completed OK!!\r
+-\r
+-REM *** Copy the primary Netgen executable file into the Install Folder ***\r
+-echo Installing %PROJ_EXEC% into %INSTALL_FOLDER%\bin ....\r
+-if /i "%BUILD_ARCH%" == "win32" (\r
+- xcopy "%PROJ_DIR%%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+- if errorlevel 1 goto ExecInstallFailed\r
+-)\r
+-if /i "%BUILD_ARCH%" == "x64" (\r
+- xcopy "%PROJ_DIR%%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+- if errorlevel 1 goto ExecInstallFailed\r
+-) \r
+-echo Installing %PROJ_EXEC%: Completed OK!!\r
+-\r
+-REM *** Copy the primary Netgen library and include files into the Install Folder ***\r
+-echo Installing %LIB_NAME%.lib into %INSTALL_FOLDER%\lib ....\r
+-if /i "%BUILD_ARCH%" == "win32" (\r
+- xcopy "%PROJ_DIR%%BUILD_TYPE%\%LIB_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y\r
+- if errorlevel 1 goto LibInstallFailed\r
+-)\r
+-if /i "%BUILD_ARCH%" == "x64" (\r
+- xcopy "%PROJ_DIR%%BUILD_ARCH%\%BUILD_TYPE%\%LIB_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y\r
+- if errorlevel 1 goto LibInstallFailed\r
+-) \r
+-echo Installing %LIB_NAME%.lib: Completed OK!!\r
+-\r
+-echo Installing %LIB_NAME%.h into %INSTALL_FOLDER%\include ....\r
+-xcopy "%NETGEN_LIBINC%\%LIB_NAME%.h" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-if errorlevel 1 goto LibInstallFailed\r
+-echo Installing %LIB_NAME%.h: Completed OK!!\r
+-\r
+-echo Installing NgSolve dependent header files into %INSTALL_FOLDER%\include ....\r
+-xcopy "%NETGEN_NGSINC%\include\nginterface_v2.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-xcopy "%NETGEN_NGSINC%\general\dynamicmem.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-xcopy "%NETGEN_NGSINC%\general\ngexception.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-xcopy "%NETGEN_NGSINC%\visualization\soldata.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-\r
+-echo Installing external dependencies\r
+-if /i "%BUILD_ARCH%" == "x64" ( \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x64\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x64\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\bin\x64\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tcl8.5" "%INSTALL_FOLDER%\lib\tcl8.5" /i /d /y /e /q\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tix8.4.3" "%INSTALL_FOLDER%\lib\tix8.4.3" /i /d /y /e /q\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tk8.5" "%INSTALL_FOLDER%\lib\tk8.5" /i /d /y /e /q\r
+- REM if errorlevel 1 goto externalInstallFailed\r
+-) \r
+-\r
+-if /i "%BUILD_ARCH%" == "win32" ( \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x86\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x86\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\bin\x86\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tcl8.5" "%INSTALL_FOLDER%\lib\tcl8.5" /i /d /y /e /q\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tix8.4.3" "%INSTALL_FOLDER%\lib\tix8.4.3" /i /d /y /e /q\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tk8.5" "%INSTALL_FOLDER%\lib\tk8.5" /i /d /y /e /q\r
+- REM if errorlevel 1 goto externalInstallFailed\r
+-)\r
+-\r
+-REM *** Finally copy the FFMPEG dlls to the bin folder ***\r
+-if /i "%BUILD_ARCH%"=="x64" (\r
+- echo Copying FFMPEG dlls\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\FFMPEG\dll\x64\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+-)\r
+-if /i "%BUILD_ARCH%"=="win32" (\r
+- echo Copying FFMPEG dlls\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\FFMPEG\dll\Win32\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+-)\r
+-\r
+-echo Copying tutorials\r
+-xcopy "%PROJ_DIR%..\tutorials" "%INSTALL_FOLDER%\tutorials\" /i /d /y /e\r
+-\r
+-\r
+-\r
+-REM *** Done with the installation routine ***\r
+-\r
+-REM *** Clean up the build directory by deleting the OBJ files ***\r
+-REM echo Deleting the %PROJ_NAME% build folder %PROJ_DIR%%PROJ_NAME% ....\r
+-REM rmdir %PROJ_DIR%%BUILD_TYPE% /s /q\r
+-\r
+-REM *** If there have been no errors so far, we are done ***\r
+-goto BuildEventOK\r
+-\r
+-REM *** Error Messages for each stage of the post build process ***\r
+-:InputParamsFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Invalid number of input parameters!!!\r
+-exit 1\r
+-:ManifestFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Manifest not successfully embedded!!!\r
+-exit 1\r
+-:CoreTCLFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying core TCL Files into install folder!!!\r
+-exit 1\r
+-:ExecInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying the %PROJ_NAME% executable into install folder!!!\r
+-exit 1\r
+-:LibInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying %LIB_NAME%.lib or %LIB_NAME%.h into install folder!!!\r
+-exit 1\r
+-:externalInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying external dependencies to install folder!!!\r
+-exit 1\r
+-\r
+-:BuildEventOK\r
+-echo POSTBUILD Script for %PROJ_NAME% completed OK.....!!\r
+-\r
++REM *********************************************************************************
++REM *** Netgen Windows Post-Build Script
++REM *** Author: Philippose Rajan
++REM *** Date: 31/01/2009
++REM ***
++REM *** Used to perform an "Install" of the generated executable
++REM *** along with the required *.tcl files
++REM ***
++REM *** Call from Visual C++ using:
++REM *** postBuild_netgen.bat $(ProjectName) $(TargetFileName) $(ConfigurationName) $(ProjectDir) <lib filename>
++REM *********************************************************************************
++if [%1]==[] goto InputParamsFailed
++set PROJ_NAME=%~1
++set PROJ_EXEC=%~2
++set BUILD_TYPE=%~3
++set BUILD_ARCH=%~4
++set PROJ_DIR=%~5
++set LIB_NAME=%~6
++
++REM *** Change these Folders if required ***
++REM Check if the environment variable NETGENDIR exists,
++REM and use it as the installation folder
++set W_WO_OCC=%BUILD_TYPE:~-4,3%
++if defined NETGENDIR (
++ echo Environment variable NETGENDIR found: %NETGENDIR%
++ set INSTALL_FOLDER=%NETGENDIR%\..
++) else (
++ echo Environment variable NETGENDIR not found.... using default location!!!
++ if /i "%W_WO_OCC%" == "OCC" (
++ set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instOCC_%BUILD_ARCH%
++ ) else (
++ set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instNoOCC_%BUILD_ARCH%
++ )
++)
++
++set NETGEN_TCLSRC=%PROJ_DIR%..\ng
++set NETGEN_LIBINC=%PROJ_DIR%..\libsrc\include
++set NETGEN_NGSINC=%PROJ_DIR%..\libsrc
++
++REM *** Start the Installation procedure ***
++echo POSTBUILD Script for %PROJ_NAME% ........
++
++REM *** Embed the Windows Manifest into the Executable File ***
++REM echo Embedding Manifest into the executable: %PROJ_EXEC% ....
++REM mt.exe -manifest "%BUILD_TYPE%\%PROJ_EXEC%.intermediate.manifest" "-outputresource:%BUILD_TYPE%\%PROJ_EXEC%;#1"
++REM if errorlevel 1 goto ManifestFailed
++REM echo Embedding Manifest into the executable: Completed OK!!
++
++REM *** Copy the core TCL files into the Install Folder ***
++echo Installing core TCL files into %INSTALL_FOLDER%\bin ....
++xcopy "%NETGEN_TCLSRC%\*.tcl" "%INSTALL_FOLDER%\bin\" /i /d /y
++xcopy "%NETGEN_TCLSRC%\*.ocf" "%INSTALL_FOLDER%\bin\" /i /d /y
++if errorlevel 1 goto CoreTCLFailed
++echo Installing core TCL Files: Completed OK!!
++
++REM *** Copy any more auxiliary TCL files into the Install Folder ***
++REM if errorlevel 1 goto AuxTCLFailed
++REM echo Installing auxiliary TCL Files: Completed OK!!
++
++REM *** Copy the primary Netgen executable file into the Install Folder ***
++echo Installing %PROJ_EXEC% into %INSTALL_FOLDER%\bin ....
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y
++ if errorlevel 1 goto ExecInstallFailed
++)
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y
++ if errorlevel 1 goto ExecInstallFailed
++)
++echo Installing %PROJ_EXEC%: Completed OK!!
++
++REM *** Copy the primary Netgen library and include files into the Install Folder ***
++echo Installing %LIB_NAME%.lib into %INSTALL_FOLDER%\lib ....
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%%BUILD_TYPE%\%LIB_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y
++ if errorlevel 1 goto LibInstallFailed
++)
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%%BUILD_ARCH%\%BUILD_TYPE%\%LIB_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y
++ if errorlevel 1 goto LibInstallFailed
++)
++echo Installing %LIB_NAME%.lib: Completed OK!!
++
++echo Installing %LIB_NAME%.h into %INSTALL_FOLDER%\include ....
++xcopy "%NETGEN_LIBINC%\%LIB_NAME%.h" "%INSTALL_FOLDER%\include\" /i /d /y
++if errorlevel 1 goto LibInstallFailed
++echo Installing %LIB_NAME%.h: Completed OK!!
++
++echo Installing NgSolve dependent header files into %INSTALL_FOLDER%\include ....
++xcopy "%NETGEN_NGSINC%\include\nginterface_v2.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++xcopy "%NETGEN_NGSINC%\general\dynamicmem.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++xcopy "%NETGEN_NGSINC%\general\ngexception.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++xcopy "%NETGEN_NGSINC%\visualization\soldata.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++
++echo Installing external dependencies
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x64\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x64\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\bin\x64\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tcl8.5" "%INSTALL_FOLDER%\lib\tcl8.5" /i /d /y /e /q
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tix8.4.3" "%INSTALL_FOLDER%\lib\tix8.4.3" /i /d /y /e /q
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x64\tk8.5" "%INSTALL_FOLDER%\lib\tk8.5" /i /d /y /e /q
++ REM if errorlevel 1 goto externalInstallFailed
++)
++
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x86\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x86\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\bin\x86\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tcl8.5" "%INSTALL_FOLDER%\lib\tcl8.5" /i /d /y /e /q
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tix8.4.3" "%INSTALL_FOLDER%\lib\tix8.4.3" /i /d /y /e /q
++ xcopy "%PROJ_DIR%..\..\ext_libs\tcl\lib\x86\tk8.5" "%INSTALL_FOLDER%\lib\tk8.5" /i /d /y /e /q
++ REM if errorlevel 1 goto externalInstallFailed
++)
++
++REM *** Finally copy the FFMPEG dlls to the bin folder ***
++if /i "%BUILD_ARCH%"=="x64" (
++ echo Copying FFMPEG dlls
++ xcopy "%PROJ_DIR%..\..\ext_libs\FFMPEG\dll\x64\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++)
++if /i "%BUILD_ARCH%"=="win32" (
++ echo Copying FFMPEG dlls
++ xcopy "%PROJ_DIR%..\..\ext_libs\FFMPEG\dll\Win32\*.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++)
++
++echo Copying tutorials
++xcopy "%PROJ_DIR%..\tutorials" "%INSTALL_FOLDER%\tutorials\" /i /d /y /e
++
++
++
++REM *** Done with the installation routine ***
++
++REM *** Clean up the build directory by deleting the OBJ files ***
++REM echo Deleting the %PROJ_NAME% build folder %PROJ_DIR%%PROJ_NAME% ....
++REM rmdir %PROJ_DIR%%BUILD_TYPE% /s /q
++
++REM *** If there have been no errors so far, we are done ***
++goto BuildEventOK
++
++REM *** Error Messages for each stage of the post build process ***
++:InputParamsFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Invalid number of input parameters!!!
++exit 1
++:ManifestFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Manifest not successfully embedded!!!
++exit 1
++:CoreTCLFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying core TCL Files into install folder!!!
++exit 1
++:ExecInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying the %PROJ_NAME% executable into install folder!!!
++exit 1
++:LibInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying %LIB_NAME%.lib or %LIB_NAME%.h into install folder!!!
++exit 1
++:externalInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying external dependencies to install folder!!!
++exit 1
++
++:BuildEventOK
++echo POSTBUILD Script for %PROJ_NAME% completed OK.....!!
++
+diff -Naur netgen-5.3.1_SRC_orig/windows/postBuild_nglib.bat netgen-5.3.1_SRC_modif/windows/postBuild_nglib.bat
+--- netgen-5.3.1_SRC_orig/windows/postBuild_nglib.bat 2014-08-29 13:53:59.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/postBuild_nglib.bat 2019-11-14 16:56:26.902326462 +0300
+@@ -1,117 +1,117 @@
+-REM *********************************************************************************\r
+-REM *** Netgen Library (nglib) Windows Post-Build Script\r
+-REM *** Author: Philippose Rajan\r
+-REM *** Date: 15/02/2009\r
+-REM ***\r
+-REM *** Used to perform an "Install" of the generated Dynamic Link Library (DLL) \r
+-REM *** and the corresponding LIB file.\r
+-REM ***\r
+-REM *** Call from Visual C++ using:\r
+-REM *** postBuild_nglib.bat $(ProjectName) $(TargetFileName) $(ConfigurationName) $(ProjectDir)\r
+-REM *********************************************************************************\r
+-if [%1]==[] goto InputParamsFailed\r
+-set PROJ_NAME=%~1\r
+-set PROJ_EXEC=%~2\r
+-set BUILD_TYPE=%~3\r
+-set BUILD_ARCH=%~4\r
+-set PROJ_DIR=%~5\r
+-\r
+-REM *** Change these Folders if required ***\r
+-REM Check if the environment variable NETGENDIR exists, \r
+-REM and use it as the installation folder\r
+-set W_WO_OCC=%BUILD_TYPE:~-4,3%\r
+-if defined NETGENDIR (\r
+- echo Environment variable NETGENDIR found: %NETGENDIR%\r
+- set INSTALL_FOLDER=%NETGENDIR%\..\r
+-) else (\r
+- echo Environment variable NETGENDIR not found.... using default location!!!\r
+- if /i "%W_WO_OCC%" == "OCC" ( \r
+- set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instOCC_%BUILD_ARCH%\r
+- ) else (\r
+- set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instNoOCC_%BUILD_ARCH%\r
+- ) \r
+-)\r
+- \r
+-set NGLIB_LIBINC=%PROJ_DIR%..\nglib\r
+-\r
+-\r
+-echo POSTBUILD Script for %PROJ_NAME% ........\r
+-\r
+-REM *** Embed the Windows Manifest into the Executable File ***\r
+-REM echo Embedding Manifest into the DLL: %PROJ_EXEC% ....\r
+-REM mt.exe -manifest "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%.intermediate.manifest" "-outputresource:%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%;#2" \r
+-REM if errorlevel 1 goto ManifestFailed\r
+-REM echo Embedding Manifest into the DLL: Completed OK!!\r
+-\r
+-REM *** Copy the DLL and LIB Files into the install folder ***\r
+-echo Installing required files into %INSTALL_FOLDER% ....\r
+-if /i "%BUILD_ARCH%" == "win32" (\r
+- xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+- if errorlevel 1 goto DLLInstallFailed\r
+-)\r
+-if /i "%BUILD_ARCH%" == "x64" (\r
+- xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y\r
+- if errorlevel 1 goto DLLInstallFailed\r
+-) \r
+-echo Installing %PROJ_EXEC%: Completed OK!!\r
+-\r
+-if /i "%BUILD_ARCH%" == "win32" (\r
+- xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y\r
+- if errorlevel 1 goto LibInstallFailed\r
+-)\r
+-if /i "%BUILD_ARCH%" == "x64" (\r
+- xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y\r
+- if errorlevel 1 goto LibInstallFailed\r
+-) \r
+-\r
+-if /i "%BUILD_ARCH%" == "x64" (\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x64\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y \r
+- xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x64\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y\r
+-\r
+- if errorlevel 1 goto ExternalInstallFailed\r
+-)\r
+-if /i "%BUILD_ARCH%" == "win32" (\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x86\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y\r
+- xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x86\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y\r
+- if errorlevel 1 goto ExternalInstallFailed\r
+-)\r
+-\r
+-echo Installing %PROJ_NAME%.lib: Completed OK!!\r
+-\r
+-REM *** Copy the include file nglib.h into the install folder ***\r
+-echo Installing %PROJ_NAME%.h into %INSTALL_FOLDER%\include ....\r
+-xcopy "%NGLIB_LIBINC%\%PROJ_NAME%.h" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-echo "%NGLIB_LIBINC%\..\libsrc\include\nginterface.hpp"\r
+-xcopy "%NGLIB_LIBINC%\..\libsrc\include\nginterface.h" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-xcopy "%NGLIB_LIBINC%\..\libsrc\include\nginterface_v2.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-xcopy "%NGLIB_LIBINC%\..\libsrc\visualization\soldata.hpp" "%INSTALL_FOLDER%\include\" /i /d /y\r
+-if errorlevel 1 goto LibInstallFailed\r
+-echo Installing %PROJ_NAME%.h: Completed OK!!\r
+-\r
+-\r
+-REM *** Clean up the build directory by deleting the OBJ files ***\r
+-REM echo Deleting the %PROJ_NAME% build folder %PROJ_DIR%%PROJ_NAME% ....\r
+-REM rmdir %PROJ_DIR%%PROJ_NAME% /s /q\r
+-\r
+-REM *** If there have been no errors so far, we are done ***\r
+-goto BuildEventOK\r
+-\r
+-REM *** Error Messages for each stage of the post build process ***\r
+-:InputParamsFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Invalid number of input parameters!!!\r
+-exit 1\r
+-:ManifestFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Manifest not successfully embedded!!!\r
+-exit 1\r
+-:DLLInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying the %PROJ_NAME% DLL into install folder!!!\r
+-exit 1\r
+-:LibInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying %PROJ_NAME%.lib or %PROJ_NAME%.h into install folder!!!\r
+-exit 1\r
+-:ExternalInstallFailed\r
+-echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying pthreadVC2.dll into install folder!!!\r
+-exit 1 \r
+-\r
+-:BuildEventOK\r
+-echo POSTBUILD Script for %PROJ_NAME% completed OK.....!!\r
++REM *********************************************************************************
++REM *** Netgen Library (nglib) Windows Post-Build Script
++REM *** Author: Philippose Rajan
++REM *** Date: 15/02/2009
++REM ***
++REM *** Used to perform an "Install" of the generated Dynamic Link Library (DLL)
++REM *** and the corresponding LIB file.
++REM ***
++REM *** Call from Visual C++ using:
++REM *** postBuild_nglib.bat $(ProjectName) $(TargetFileName) $(ConfigurationName) $(ProjectDir)
++REM *********************************************************************************
++if [%1]==[] goto InputParamsFailed
++set PROJ_NAME=%~1
++set PROJ_EXEC=%~2
++set BUILD_TYPE=%~3
++set BUILD_ARCH=%~4
++set PROJ_DIR=%~5
++
++REM *** Change these Folders if required ***
++REM Check if the environment variable NETGENDIR exists,
++REM and use it as the installation folder
++set W_WO_OCC=%BUILD_TYPE:~-4,3%
++if defined NETGENDIR (
++ echo Environment variable NETGENDIR found: %NETGENDIR%
++ set INSTALL_FOLDER=%NETGENDIR%\..
++) else (
++ echo Environment variable NETGENDIR not found.... using default location!!!
++ if /i "%W_WO_OCC%" == "OCC" (
++ set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instOCC_%BUILD_ARCH%
++ ) else (
++ set INSTALL_FOLDER=%PROJ_DIR%..\..\%PROJ_NAME%-instNoOCC_%BUILD_ARCH%
++ )
++)
++
++set NGLIB_LIBINC=%PROJ_DIR%..\nglib
++
++
++echo POSTBUILD Script for %PROJ_NAME% ........
++
++REM *** Embed the Windows Manifest into the Executable File ***
++REM echo Embedding Manifest into the DLL: %PROJ_EXEC% ....
++REM mt.exe -manifest "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%.intermediate.manifest" "-outputresource:%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%;#2"
++REM if errorlevel 1 goto ManifestFailed
++REM echo Embedding Manifest into the DLL: Completed OK!!
++
++REM *** Copy the DLL and LIB Files into the install folder ***
++echo Installing required files into %INSTALL_FOLDER% ....
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y
++ if errorlevel 1 goto DLLInstallFailed
++)
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_EXEC%" "%INSTALL_FOLDER%\bin\" /i /d /y
++ if errorlevel 1 goto DLLInstallFailed
++)
++echo Installing %PROJ_EXEC%: Completed OK!!
++
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_TYPE%\%PROJ_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y
++ if errorlevel 1 goto LibInstallFailed
++)
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%%PROJ_NAME%\%BUILD_ARCH%\%BUILD_TYPE%\%PROJ_NAME%.lib" "%INSTALL_FOLDER%\lib\" /i /d /y
++ if errorlevel 1 goto LibInstallFailed
++)
++
++if /i "%BUILD_ARCH%" == "x64" (
++ xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x64\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x64\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++
++ if errorlevel 1 goto ExternalInstallFailed
++)
++if /i "%BUILD_ARCH%" == "win32" (
++ xcopy "%PROJ_DIR%..\..\ext_libs\pthreads-Win32\dll\x86\pthreadVC2.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ xcopy "%PROJ_DIR%..\..\ext_libs\zlib\x86\lib\zlib1.dll" "%INSTALL_FOLDER%\bin" /i /d /y
++ if errorlevel 1 goto ExternalInstallFailed
++)
++
++echo Installing %PROJ_NAME%.lib: Completed OK!!
++
++REM *** Copy the include file nglib.h into the install folder ***
++echo Installing %PROJ_NAME%.h into %INSTALL_FOLDER%\include ....
++xcopy "%NGLIB_LIBINC%\%PROJ_NAME%.h" "%INSTALL_FOLDER%\include\" /i /d /y
++echo "%NGLIB_LIBINC%\..\libsrc\include\nginterface.hpp"
++xcopy "%NGLIB_LIBINC%\..\libsrc\include\nginterface.h" "%INSTALL_FOLDER%\include\" /i /d /y
++xcopy "%NGLIB_LIBINC%\..\libsrc\include\nginterface_v2.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++xcopy "%NGLIB_LIBINC%\..\libsrc\visualization\soldata.hpp" "%INSTALL_FOLDER%\include\" /i /d /y
++if errorlevel 1 goto LibInstallFailed
++echo Installing %PROJ_NAME%.h: Completed OK!!
++
++
++REM *** Clean up the build directory by deleting the OBJ files ***
++REM echo Deleting the %PROJ_NAME% build folder %PROJ_DIR%%PROJ_NAME% ....
++REM rmdir %PROJ_DIR%%PROJ_NAME% /s /q
++
++REM *** If there have been no errors so far, we are done ***
++goto BuildEventOK
++
++REM *** Error Messages for each stage of the post build process ***
++:InputParamsFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Invalid number of input parameters!!!
++exit 1
++:ManifestFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Manifest not successfully embedded!!!
++exit 1
++:DLLInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying the %PROJ_NAME% DLL into install folder!!!
++exit 1
++:LibInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying %PROJ_NAME%.lib or %PROJ_NAME%.h into install folder!!!
++exit 1
++:ExternalInstallFailed
++echo POSTBUILD Script for %PROJ_NAME% FAILED..... Error copying pthreadVC2.dll into install folder!!!
++exit 1
++
++:BuildEventOK
++echo POSTBUILD Script for %PROJ_NAME% completed OK.....!!
+diff -Naur netgen-5.3.1_SRC_orig/windows/resource.h netgen-5.3.1_SRC_modif/windows/resource.h
+--- netgen-5.3.1_SRC_orig/windows/resource.h 2014-08-29 13:53:59.000000000 +0400
++++ netgen-5.3.1_SRC_modif/windows/resource.h 2019-11-14 16:56:26.894326686 +0300
+@@ -1,25 +1,25 @@
+-//{{NO_DEPENDENCIES}}\r
+-// Microsoft Visual C++ generated include file.\r
+-// Used by netgen.rc and nglib.rc\r
+-//\r
+-#define _USE_DECLSPECS_FOR_SAL 0\r
+-#define _USE_ATTRIBUTES_FOR_SAL 0\r
+-#define VS_VERSION_INFO 1\r
+-#define VFFF_ISSHAREDFILE 0x0001\r
+-#define VFF_CURNEDEST 0x0001\r
+-#define VIFF_FORCEINSTALL 0x0001\r
+-#define VFF_FILEINUSE 0x0002\r
+-#define VIFF_DONTDELETEOLD 0x0002\r
+-#define VFF_BUFFTOOSMALL 0x0004\r
+-#define VS_USER_DEFINED 100\r
+-\r
+-// Next default values for new objects\r
+-// \r
+-#ifdef APSTUDIO_INVOKED\r
+-#ifndef APSTUDIO_READONLY_SYMBOLS\r
+-#define _APS_NEXT_RESOURCE_VALUE 101\r
+-#define _APS_NEXT_COMMAND_VALUE 40001\r
+-#define _APS_NEXT_CONTROL_VALUE 1000\r
+-#define _APS_NEXT_SYMED_VALUE 101\r
+-#endif\r
+-#endif\r
++//{{NO_DEPENDENCIES}}
++// Microsoft Visual C++ generated include file.
++// Used by netgen.rc and nglib.rc
++//
++#define _USE_DECLSPECS_FOR_SAL 0
++#define _USE_ATTRIBUTES_FOR_SAL 0
++#define VS_VERSION_INFO 1
++#define VFFF_ISSHAREDFILE 0x0001
++#define VFF_CURNEDEST 0x0001
++#define VIFF_FORCEINSTALL 0x0001
++#define VFF_FILEINUSE 0x0002
++#define VIFF_DONTDELETEOLD 0x0002
++#define VFF_BUFFTOOSMALL 0x0004
++#define VS_USER_DEFINED 100
++
++// Next default values for new objects
++//
++#ifdef APSTUDIO_INVOKED
++#ifndef APSTUDIO_READONLY_SYMBOLS
++#define _APS_NEXT_RESOURCE_VALUE 101
++#define _APS_NEXT_COMMAND_VALUE 40001
++#define _APS_NEXT_CONTROL_VALUE 1000
++#define _APS_NEXT_SYMED_VALUE 101
++#endif
++#endif
